Chrysler/Jeep/Dodge PIN bypass.

PIN code reading.

MANUAL

Chrysler PIN bypassconnecting

1. Remove the IMMO Box from vehicle. It locates on the ignition lock and has that view.

2. Desolder two points of coil connection carefully (marked on red color on the photo) and remove the plate from immo box.

3. Find microchip EEPROM 24LC02B (see on photo)

4. Clean the microchip legs from vanish. Connect the clips with microchip. Black point to pin 1 of microchip.

3. Next 2 seconds the green LED must to light and go out to confirm PIN code writing.

2. Press the white button «Write PIN».

4. You can find new PIN code on the sticker back side of your device.

1. Turn switch ON. Red LED must light constantly.

Chrysler PIN bypassbypassing