CHROME

YOU ARE AN EXPERT IN YOUR PROCESS... Chrome plating involves the electrolytic deposition of chromium onto metal

components. Plating baths of hexavalent chromic acid are the most widely used in

the industry. These baths produce very fine mists of chromic acid which must be

controlled. Airborne emissions of hexavalent chrome are facing increasingly

stringent pollution abatement requirements. In almost all applications where high

efficiency control of hexavalent chromium is required for regulatory compliance,

Kimre’s B-GON® Mist Eliminator Systems featuring its composite mesh-pad designs

have been used. EPA-sponsored test results have shown that Kimre systems exceed

the most stringent requirement in the U.S. and around the world. Our designs

achieve emissions below 0.002 mg/m3.

WE ARE AN EXPERT IN OPTIMIZING YOUR PROCESS! Our composite B-GON® mesh-pads are provided in removable cassettes which allow for ease of cleaning and maintenance, when necessary. This feature allows the B-GON Pads to be cleaned and re-used for many years, providing cost-effective solutions for your plating emission needs. Let Kimre engineers review your process emission needs. We are happy to provide the best, most cost-effective designs to meet your requirements.

WWW.KIMRE.COM

KIMRE

Increase process effectiveness and productivity with minimized operating and

maintenance.

B-GON® structured media, your MACT

compliance standard for composite

mesh –pad systems.

Hard chrome electroplating

Chrome anodizing

Chromic and acid mists

Nickel electroplating

• High efficiency

• Low operating pressure

• Long life

• Documented results

• Non - clogging

• Ease of cleaning

• Dry operation

CHROME

Photos courtesy of some of the many world-wide OEM users employing KIMRE™ Technology