choice of machine sizes a4,a3 - gmp belgium · iso 9001:2000 certificate certificate number :...

2
ISO 9001:2000 CERTIFICATE CERTIFICATE NUMBER : RQM0977 www.gmp.com Choice of machine sizes A4, A3 Quick and simple to use High volume, fast production operation Matchless safety profile-meets Major European/USA standards Quality hot and cold lamination Carrier-free operation for GMP products Sturdy construction-built to withstand continuous professional use Choice of machine sizes A4,A3 Quick and simple to use Carrier Free Operation Hot & Cold Lamination

Upload: vandung

Post on 04-Nov-2018

224 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Choice of machine sizes A4,A3 - GMP Belgium · ISO 9001:2000 CERTIFICATE CERTIFICATE NUMBER : RQM0977 Choice of machine sizes A4, A3 Quick and simple to use High volume, fast production

ISO 9001:2000 CERTIFICATE

CERTIFICATE NUMBER : RQM0977 www.gmp.com

Choice of machine sizes A4, A3

Quick and simple to use

High volume, fast production operation

Matchless safety profile-meets Major

European/USA standards

Quality hot and cold lamination

Carrier-free operation for GMP products

Sturdy construction-built to withstand

continuous professional use

Choice of machine sizes A4,A3Quick and simple to use

Carrier Free Operation Hot & Cold Lamination

Page 2: Choice of machine sizes A4,A3 - GMP Belgium · ISO 9001:2000 CERTIFICATE CERTIFICATE NUMBER : RQM0977 Choice of machine sizes A4, A3 Quick and simple to use High volume, fast production

20041101

Copyright GMP 2004. All rights reserved. Reproduction by any means of any image in this catalogue is prohibited without the prior consent of GMP and its authroized agent

Chromonex : PP and PET compositede FilmPhotonex : Heat Seal Laminating utilizing PVC material FilmPolynex : Heat Seal Laminating utilizing OPP material FilmMicronex : Heat Seal Laminating utilizing ultra thin dry overcoating Film

Model Name LAMIART-9LSI(Q1)

GMP reserves the right to after change specifications without prior notice.

Laminating SpeedLaminating WidthLaminating FilmsThickness of substrate(Paper)Power RequirementsPower ConsumptionWarm Up TimeHeating SystemOperating TemperatureSpeed ControlTemperature ControlDimensions(WxLxH)Type of Main Motor

950mm/min230mm

75mic~250mic80g/ ~250g/

220~240V, 50/60Hz400W, 1.9A3 minutes

Heat Plate (Mica Heater)160 Max.

Key PadKey Pad

392 x 240 x 99mmDC W-Geard Motor/24V50

SpecificationsLAMIART-13LSI(Q1)

950mm/min330mm

75mic~250mic80g/ ~250g/

220~240V, 50/60Hz600W, 2.7A3 minutes

Heat Plate (Mica Heater)150 Max.

Key PadKey Pad

492 x 240 x 99mmDC W-Geard Motor/24V50

Guide to lamination

Press power

switch ‘on’located at the rearof the laminator.

Press ‘hot’ keyfor hotlamination

Insert documentinto pouchlaminator

Within secondsyou have alaminateddocument

1

2

3

4

8-bit microprocessor with pre-programmed functions

Handles paper sizes up to A3 in a variety of thickness

Pre-heating function with a wide range of operating temperature(0~160 )

Variable temperature and speed controls

One-touch keypad with LCD settings & audible signal

Cold lamination facility for photographs

Reverse switch for mis-fed documents

Water-proof and tamper-proof results