En

gin

es &

Co

mp

on

en

ts

440

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.govChevrolet Engines

383ci Stroker Crate EnginesWhen it comes to cranking serious torque from the classic small block, it’s hard to beat the 383 stroker combination, which uses a long 3.800 inch stroke with 4.005 inch bores to generate exceptional low end pulling power and high RPM horsepower. Chevrolet Performance’s stroker crate engine is designed for optimal performance where more torque and power are what you are looking for. It features Vortec iron heads with 64cc chambers, and 1.940 intake valves , over 1.500 inch exhaust valves. Your choice of partial engine without heads, or Base+ engine with intake manifold. Has right side dipstick.383 Partial Engine without HeadsG13020 partial .............. 4284.99 ea HT383/323HP w/Vortec 1.94/1.50 HeadsG13019 base+ w/intake 5252.99 ea

The Ultimate ZZ 350-based Crate Engine from Chevrolet Performance!Chevrolet Performance’s ZZ6 is one of the most powerful 350 based crate engines in the more than 25 year history of the ZZ crate engine lineup. It uses aluminum Fast Burn cylinder heads equipped with LS style beehive valve springs for greater high RPM performance. Choose from our carbureted designs rated at 405HP and 406 ft lb of torque, or our EFI equipped engines that are rated at 420HP and 408 ft lb of torque... more than any Gen I small block engine ever offered in a production Chevrolet muscle car or Corvette! Chevrolet Performance’s ZZ6 EFI crate engine blends the timeless style of the classic 350 small block with modern, electronically controlled port fuel injection. The key is the unique induction system, which features port injectors mounted on an aluminum intake manifold that has the appearance of a carbureted intake. A fuel injection throttle body mounted in place of the carburetor allows a traditional air cleaner to be installed on the engine. The ZZ6 uses an aggressive hydraulic roller camshaft that supports the engine’s high RPM airfl ow capability while maintaining excellent low-speed drivability. A simple “Plug and Play” control system rounds out the EFI package to get the engine running in your project without the need for third party tuning.

ZZ6 350ci/405HP Crate Engine for Carbureted ApplicationsG13143 base+ with intake and HEI ................................................ 5922.99 ea G13031 Turn-Key ........................................................................... 8375.99 ea ZZ6 350ci/420HP Crate Engine with EFIG13142 deluxe ................................................................................ 7810.99 ea G13141 Turn-Key ........................................................................... 9371.99 ea

350 Small Block Crate EnginesThe best value crate engines in the Chevrolet Performance Parts lineup! The 350 series engines are available in base, deluxe, or Turn-Key confi gurations. Choose from our 350/290 308 HP or our 350 HO 333 HP versions. 350/290 308HP w/Cast Iron 1.94/1.50 Heads G13013 base .............. 2734.99 ea G13150 base+ ............ 3308.99 ea 350HO 333HP w/Vortec 1.94/1.50 Heads G13015 base .............. 3243.99 ea G3509 deluxe ........... 4634.99 ea G13014 Turn-Key ...... 5793.99 ea

SP350 Crate EnginesAffordable performance in your choice of a 357HP or a 385HP version engine. With a deep reserve of low RPM torque, it quickly reminds you why Chevrolet’s original 350 small block has been the industry benchmark for decades. 357HP engine comes with cast iron 1.94/1.50 heads, while the 385HP version is equipped with aluminum 2.00/1.550 heads.SP/ZZ Partial Engine without HeadsG13017 partial .............. 2418.99 ea SP350/357HP w/Cast Iron 1.94/1.50 HeadsG13144 base ................. 3766.99 ea G13145 deluxe ............. 4983.99 ea G13146 Turn-Key ........ 6373.99 ea SP350/385HP w/Alum 2.00/1.550 HeadsG13147 base ................. 5622.99 ea G13148 Turn-Key ........ 7010.99 ea

383/435HP w/Aluminum HeadsChevrolet’s stroker crate engine is designed for optimal performance where more torque and power are what you are looking for. It features lightweight aluminum cylinder heads based on the proven Fast Burn design, with large intake runners and 2.00/1.55 inch valves. Beehive style valve springs enable great high RPM performance and durability, allowing the SP383 to rev higher and build more horsepower. The result is 435 exhilarating horsepower and 445 ft lb of seat tugging torque. Like all of our 350 based crate engines, it is built with a cast iron block with four bolt mains. It also features a forged steel crankshaft, an aggressive hydraulic roller camshaft and a high fl ow aluminum intake manifold. Use the Holley 770 cfm four barrel carburetor (part #19170093) to achieve the listed horsepower and torque ratings. SP383/435HP w/Fast Burn Alum. HeadsG13149 deluxe ............ 6954.99 ea

Chevrolet Performance, the pioneer in factory engineered crate engines offers approximately 50 crate engines, including small block, big block, LS, LT, LSX, and E-Rod engines, offer nearly limitless possibilities for new-school and old-school projects, as well as race cars. Additionally, our engine accessories, transmission components, and controllers help take the guesswork out of powering your project. Our E-ROD emissions compliant systems make several of our crate engines legal for installation in millions of pre-1996 vehicles in California. More than choice, Chevrolet Performance are factory designed and engineered to the same standards as production vehicle components, while additional supplied parts and accessories meet the same rigorous standards. That means you can trust the parts will fi t and perform like they were factory installed. Important: Not for use in pollution controlled vehicles. Computer controlled vehicles may need updated chips or other modifi cations.Note: For a limited time, this item ships for only $0.01 (one cent) to any address within the contiguous USA! Add item # LG65 for liftgate service. An additional fee is required for liftgate service on a residential delivery.

Features a 24-Month / 50,000 Mile Limited Warranty!

Small Block Performance EnginesBig Torque Stroker!

Base and Base+:

Deluxe:

Turn-Key:

Partial:

Base engine assemblies typically include block, crank, pistons, cam, heads, and valve covers, but allows the builder to pick the carburetor/injection system and intake manifold they desire. Base+ engines include an intake manifold and on select models, a distributor as well.

Partial engine assemblies typically include block, crank, connecting rods, and pistons allowing the builder to add the top end and manifold of their choice to complete the build the way they want it!

We told our engineers to have some fun and assemble engines the way they think it should be done… we then took their combinations, built them up and put them in a crate that ships right to your dealer. The Turn-Key engines represent an outstanding value, and they are perfect for enthusiasts who have built a chassis and need reliable power to get it down the road.

The deluxe crate engines are essentially ready to fi re up, as they ship with the distributor installed, harmonic balancer bolted on and the carburetor in the crate. All you need to do is put the parts together and go!

Ram Jet 350 Deluxe EngineEvoking the nostalgic look of the early fuel injection systems, but instead of a mechanical injection system, the Ram Jet 350/345HP engine is fed by a state-of-the-art, electronically controlled port fuel injection system. Engine comes with the wiring harness, PFI Ram Jet manifold and Vortec iron heads.Ram Jet 350 w/Vortec 1.94/1.50 HeadsG3508 deluxe ............. 7072.33 ea

G13148

G13020

G13013

Levels of Assemblyto Choose from . . .

G13017

h l f h i i f i d i ff i l 5 i i l di

Chevrolet Performance Crate Engines

KK

En

gin

es &

Co

mp

on

en

ts

441WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov Chevrolet Engines

G13172

ZZ427/480 DeluxeThe L88 427 was the ultimate expression of Chevy’s production big block power, combining a rigid iron cylinder block with lightweight aluminum cylinder heads and a single, four barrel carburetor. Our engineers have recreated that classic, raspy rat engine, but with updated components that enhance drivability and performance!G13053 base+ ......... 11,298.99 ea

LT5/755HPAs the heart of the Corvette ZR1, the supercharged LT5 6.2L SC is the most powerful engine ever offered in a regular production Chevrolet. It features a more efficient, more compact 2.6L Eaton R2650 TVS supercharger. That’s enough to generate more than 9 pounds of boost and help produce 755 horsepower and 715 ft lb of torque!LT5/755HPG13169 dry sump ... 18,811.99 ea

LT4/650HP Crate EnginesAs the heart of the Corvette Z06, the supercharged LT4 6.2L SC is the most powerful engine ever offered in a regular production Chevrolet. It features a more effi cient, more compact 1.7L Eaton R1740 TVS supercharger, which spins at up to 20,000 RPM. That’s enough to generate more than 9 pounds of boost and help produce 650 horsepower and 650 ft lb of torque. The LT4 is based on the same Gen V small block architecture as the LT1 engine, with several unique features designed to support its higher output and the greater cylinder pressures created by forced induction. They include Rotocast A356T6 aluminum cylinder heads that are stronger and handle heat better than conventional castings, lightweight titanium intake valves and stronger forged aluminum pistons. Your choice of dry sump or wet sump versions.LT4/650HPG13167 dry sump .... 15,769.99 ea G13168 wet sump .... 14,692.99 ea

ZZ572 Rat KingThe ZZ572/620 is built with huge 4.560 inch bores and a 4.375 inch stroke to help it deliver 621HP and a stunning 645 ft lb of grunt! This engine is available as a base or deluxe engine. If that’s not powerful enough for you, our ZZ572/720R deluxe engine pumps out 727HP and 680 ft lb of torque!572 Big BlockG13046 base 621HP .. 14,219.99 ea G13005 deluxe 621HP 16,228.99 ea G13050 deluxe 727HP 15,945.99 ea

454 Big Block EnginesOur 454 crate engine features a latest generation block casting with four bolt main is the engine’s foundation and features an all-forged rotating assembly for strength and durability. A hydraulic roller cam provides for excellent drivability and a broad performance range. Your choice of iron rectangular port heads to produce 438HP or aluminum oval port heads for 469HP. Or, order the partial engine without heads or intake!454 Big BlockG13040 partial ............... 4423.99 ea G7167 438HP base+ .. 6691.99 ea G13041 469HP base+ .. 7868.99 ea

LT1 6.2L Crate EnginesIntroduced on the seventh generation Corvette Stingray, the LT1 6.2L opened the next chapter in the long, historic legacy of the small block engine – and gives your project vehicle a high tech heart transplant with an unprecedented balance of performance and effi ciency! The LT1 is architecturally similar to the LS family of engines, but with a unique block casting, cylinder head design, oiling system and more. It also combines advanced technologies including direct injection, Active Fuel Management (cylinder deactivation) and continuously variable valve timing to support an advanced combustion system. Our LT1 6.2L crate engine is rated at 455-460 horsepower and 455-465 ft lb of torque; and it is offered with a wet sump oiling system. A controller specially designed for retrofi t application using an automatic transmission is available.LT1 6.2LG13164 dry sump ...... 8682.99 ea G13165 wet sump ..... 8400.00 ea

502 Big Block EnginesTo support all that torque, we build this big block with our latest generation block casting with four bolt main caps and complement it with an all-forged rotating assembly for exceptional strength and durability. A hydraulic roller camshaft is used for excellent drivability and a broad performance range. We offer iron oval port heads to produce 406HP, iron rectangular port heads for 461HP, aluminum oval port heads for 508HP. Order our base, base+, or deluxe engines, or get the partial engine without heads or intake... your choice!Partial Engine without Heads or IntakeG13043 502 partial ..... 5517.99 ea Base Engine without IntakeG13042 HT502/406HP 6591.99 ea G3433 ZZ502/508HP 8613.99 ea Base+ Engine with IntakeG7165 502HO/461HP 7516.99 ea Deluxe Engine with 870cfm Holley G3434 ZZ502/508HP 10,267.99 ea

Big Block Performance Engines

LT Series Performance Engines

454 Big Block Power!

LSX454A 454 with the latest technology! Lighter and more compact than an original big block 454. Delivers an output of 627HP and 586 ft lb, but requires no more space under the hood than a production LS engine. All-forged, super tough rotating assembly and features a pair of our deep breathing LSX 6 bolt heads. Includes orange powder coated valve covers with engraved “LSX454” logos.G13172 LSX454 ...... 12,010.99 ea

G13041

G13165 G13168

G13040

G13171

LSX

LT376/535HP Crate EngineChevrolet Performance engineers have wasted no time digging into the new LT engine family to mine more power – and they’ve delivered it in the LT376/535. The LT376/535 builds on the technologies and capability of the LT1 6.2L offered in the Corvette Stingray and Camaro SS, extending them with CNC-ported heads and our high lift LT1 Hot Cam to deliver 535 naturally aspirated horsepower. It also employs the production direct injection fuel system, which enables more precise fuel delivery that supports a high 11.5:1 compression ratio which translates into big power! Includes the engine assembly with a production intake manifold, throttle body assembly, ignition coils, water pump, balancer and more. Believe us: The LT376/535 loves to rev and achieving those 535 horses is an exercise in exhilaration. Give your project this high tech heart transplant and enjoy the ride!LT376/535HPG13166 wet sump ...... 7900.00 ea Transmissions

Torque Converters

Transmission Controllers

Transmission Install Kits

LSX376Chevrolet takes the economical LSX Bow Tie block and combines it with the LS3’s high fl ow L92 style heads and mostly internal components we swap the pistons for forged parts), to create the affordable, high revving LSX376. If your plans are for up to 8psi of maximum boost, we have the LSX376-B8. For up to 15 psi of boost, select the LSX376/B15.G13171 LSX376/B8 ..... 7602.99 ea G13170 LSX376/B15 ... 8921.99 ea

For Drivetrain ComponentsRefer to Section M

G3434

13043

En

gin

es &

Co

mp

on

en

ts

442

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.govATK Engines

All of ATK’s manufacturing facilities have achieved both QS-9000 and ISO 9001 certifi cation levels, one of the few engine remanufacturers in the world to have done so. In addition, ATK’s

parent company VEGE Motoren has also achieved ISO 9001 certifi cation. This is particularly signifi cant as it represents both an engineering and a manufacturing certifi cation.

There are over 150 processes involved in remanufacturing an ATK engine. Featured procedures include:

ATK Remanufactured Engine Warranty Information:At Classic Industries®, we know that supplying a great product is only part of the job. The staff at ATK is made up of dedicated professionals whose only job is to support you, the Classic Industries® customer. From the moment you call on ATK, whether to request technical assistance, or inquire about their warranty, they are dedicated to providing solutions and support. That’s the ATK promise. Classic Industries® and ATK have always been leaders in innovation, offering products, warranties and programs that have redefi ned the industry. That leadership is evident in our products and our support. ATK warrants to the original purchaser that each engine sold by Classic Industries® shall be free of defects in material and workmanship under normal use and with periodical maintenance as set forth by the original manufacturer subject to the following terms and conditions.

Defi nitions:Engine: As used in this warranty refers to the remanufactured assembly (basic block, cylinder head and internal components) as supplied by ATK.Term: Standard Warranty: This warranty shall exist for 3-years and unlimited miles. Warranty term begins on date of installation. The Standard Warranty applies to all ATK products with the following exceptions:Diesel Engines carry a warranty term of 12-months or 12,000 miles whichever occurs fi rst.Trucks Over 11,000 GVW (Gross Vehicle Weight) carry a warranty term of 12-months or 12,000 miles whichever occurs fi rst.Motorhomes: Class A or Motorhomes over 11,000 GVW are NOT COVERED by the ATK warranty. ATK expressly does not offer engines for these applications. Please be aware that only engines designed expressly for large motorhomes should ever be used in such an application. ATK does not catalog nor prepare engines for these applications and therefore takes no responsibility when an ATK engine is used in this manner.Product Replaced Under Warranty:Product replaced under warranty carries the remainder product’s warranty term.Standards:Subject to the limitations listed herein. ATK, at its option, shall repair or replace a product within the warranty term after determination by ATK that the product is defective. All products are to be returned to ATK for inspection. Products not returned to ATK will not be warranted. All repairs and/or replacements covered by this warranty must be authorized by ATK. Unauthorized repairs will not be paid.Limitations:This warranty applies to products originally supplied by ATK. This warranty does not apply to or include any of the following:A. Damage as a result of OVERHEATING, LACK OF LUBRICATION or CONTAMINATION.B. Damage resulting from PRE-IGNITION or DETONATION. This includes but is not limited to: melted or broken pistons, broken piston rings, damaged cylinder heads, leaking head gaskets, etc. For more information regarding pre-ignition and detonation please contact our Customer Service Department.C. Repair or replacement required as a result of any accident or misuse.D. Repair or replacement of any accessory or service item, including specifi cally but not limited to: all components of the cooling, fuel, electrical and ignition systems in addition to all belts, hoses, and fi lters.E. Any product used for competition racing or related purposes.F. Any product to which a device or accessory not conforming to original manufacturer’s specifi cations has been installed.G. Any product on which periodic maintenance services required by the original manufacturer have not been performed. Limited Liability:ATK’s liability under this warranty is limited solely to the repair or replacement of defective product. ATK shall not be liable for any incidental, special, consequential or exemplary damages, including but not limited to rental cars, towing fees or for any service not expressly provided for herein, relating to or arising from the ATK product.Limited Warranty:This warranty is given in lieu of all other warranties, expressed or implied, including any warranty of merchantability, or fi tness for a particular purpose, on the part of ATK or the dealer installing the engine. No dealer nor any agent or employee thereof, is authorized to extend or modify this warranty.Labor Payments:ATK authorized repairs will be compensated at a rate not to exceed 100% of the applicable fl at rate schedule as published by Chilton, Mitchell or Motors Repair Manuals. Hourly rates for all authorized labor claims will be paid in accordance with the original installation rate, not to exceed $42.00 per fl at rate hour. Do-it-yourself repairs, and repairs performed by unlicensed repair facilities, will be paid at a rate not to exceed $15.00 per fl at rate hour.Additional Owner/User Obligations:Initial Startup: Valves must be readjusted to manufacturer’s specifi cations. Due to various component designs, cylinder head re-torque may or may not be required in your particular application. Refer to factory shop manual for the proper procedure for your engine type. If for any reason you are unsure what action to take please contact our Customer Service Department via our Toll Free telephone number.First Service Between 600-1000 Miles After Installation: Oil and oil fi lter must be changed, valves readjusted and cylinder heads re-torqued (refer to initial startup instructions). Failure to perform these basic operations may result in a voided warranty.

Engine blocks magnafl uxed, bored, precision-honed and mains line-honed. Camshaft bearings line-bored for accurate center-to-center clearance. Engine blocks and cylinder heads precision surfaced. Cylinder heads magnafl uxed and machined for three angle valve seats. Crankshafts stress-relieved, precision ground and micro-polished. Camshafts precision ground or replaced with new. Each engine tested (most hot run tested) for compression, oil pressure, oil leaks, engine noise and general operating condition before shipment.

Remanufactured Engines

The No Fault Gold Warranty Program Includes:Rental Car up to $150!Rental car expense reimbursed for 5 days/ $30 per day up to $150.Towing Up to $100!Towing reimbursed on approved claims up to $100 per occurrence.Increased Labor Rate Up to $95 per hourIncrease labor rates to cover approved repairs up to $95 per hour.Fluids Up to $25!Cost of fl uids is reimbursed on approved claims up to $25.

ATK now offers the No Fault Gold Warranty Program for you to purchase in addition to the Industry Leading standard ATK warranty already included with our remanufactured engines. This added protection policy covers expenses not included in ATK’s standard warranty. Coverage is based on hourly rates established by Chilton, Motor and Mitchell manuals.

Introducing ATK’s No Fault Gold Warranty Program.An added protection program that covers car rental, towing, an increased labor rate and fl uids on all approved claims.

How does the core charge work?Upon ordering, you will be charged the retail price of the engine plus the core charge. When your engine arrives, you will save the crating that it is shipped in, so that you can use it to package your core. Once the core is ready to ship, you will call ATK for core pickup. ATK will then inspect the core to make sure it meets the following criteria. Providing the core meets all of the criteria, you will be refunded the core price.

Core Policy: All fl uids must be drained prior to core return. Cores must be complete and in rebuildable condition. Core returned must be identical to the engine purchased in size and application. ATK reserves the right to refuse any core that has been modifi ed or altered.Note: Core prices can fl uctuate according to supply, demand and availability. If you plan to return a core for credit, please confi rm the core price with your salesperson prior to ordering.

ATK No Fault Gold Warranty Program is an additional $225.00

NO Fault Gold Warranty Program

Standard ATK Warranty

Rental Towing Max. Hourly Labor Rate

YES YES Up to $95

NO NO Up to $50

KK

En

gin

es &

Co

mp

on

en

ts

443WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov ATK Engines

Part # Years C.I.D./L V.I.N Code Description + Core PriceDC38 82-84 173 2.8 V6 1 block #068, 889, 818, carbureted only 260 1854.99 ea DC088 85-86 173 2.8 V6 S block #061, FI only 260 1854.99 ea DCAl 87 173 2.8 V6 S block #457, 695, crank #817, FI 260 1854.99 ea DCA7 88-89 173 2.8 V6 S block #457, 695, crank #526, 481, FI 260 1854.99 ea DCB7 90-92 191 3.1 V6 T FI, cast iron heads, block #457, 695, crank #981, for use w/distributor type ignition, passenger side starter 285 2009.99 ea DCC9 93-95 207 3.4 V6 S block #608, cast iron heads #884, crank #981, with crank and cam sensor 285 2149.99 ea DB61 97-00 231 3.8 V6 K long block 265 2574.99 ea DP06 77-81 301 4.9 V8 Y no smog, non turbo 260 2314.99 ea DC04 76-79 305 5.0 V8 G,H,Q,U driver side dipstick, 7 exhaust manifold bolts on both heads 260 1671.99 ea VC04 76-79 305 5.0 V8 G,H,Q,U same as DC04 (above) except with valve covers, timing cover and oil pan 260 1774.99 ea DC05 78-85 305 5.0 V8 G,H,F,S passenger side dipstick, 7 exhaust manifold bolts on both heads 260 1671.99 ea VC05 78-85 305 5.0 V8 G,H,F,S same as DC05 (above) except with valve covers, timing cover and oil pan 260 1774.99 ea DC095 86 305 5.0 V8 F,G,H carb or FI, block #551, head #416, 301, 601, full circle rear main seal 260 1804.99 ea VC95 86 305 5.0 V8 F,G,H same as DC95 (above) except with valve covers, timing cover and oil pan 260 1905.99 ea DCA5 86 305 5.0 V8 F,G,H FI, non-roller, block #766, valve cover bolts around edge of cover 260 1854.99 ea DCB3 87-88 305 5.0 V8 G,H carb, non-roller, block #627, 058, head #081, 187, center valve cover bolts 260 1854.99 ea VCB3 87-88 305 5.0 V8 G,H same as DCB3 (above) except with valve covers, timing cover and oil pan 260 1956.99 ea DCM7 87-94 305 5.0 V8 F TPI, FI, HO roller cam, block #627, 058, head # 081, 187, center valve cover bolts 260 2009.99 ea DC036 87-95 305 5.0 V8 E EFI, roller cam, block #627, 058, head #081, 187, center valve cover bolts 260 1904.99 ea VC36 87-95 305 5.0 V8 E same as DC36 (above) except with valve covers, timing cover and oil pan 260 2009.99 ea DCA9 87-95 305 5.0 V8 H FI, non-roller, block #627, 058, head #081, 187, center valve cover bolts 260 1854.99 ea VCA9 87-95 305 5.0 V8 H same as DCA9 (above) except with valve covers, timing cover and oil pan 260 1956.99 ea DP28 73-77 350 5.7 V8 smog holes head, specify head # 2-3/4" crank centering ring, splash shield to #2 & #4 main 385 2691.99 ea DC013 78-80 350 5.7 V8 H,J,K,L,X,4,8 2 bolt main, driver side dipstick, 7 exhaust manifold bolts on passenger side head 385 1804.99 ea VC13 78-80 350 5.7 V8 H,J,K,L,X,4,8 same as DC13 (above) except with valve covers, timing cover and oil pan 385 1964.99 ea VC15 78-80 350 5.7 V8 H,J,K,L,X,4,8 same as DC15 (above) except with valve covers, timing cover and oil pan 410 1999.99 ea VC11 78-85 350 5.7 V8 L,M,P,6,8 same as DC11 (above) except with valve covers, timing cover and oil pan 385 1989.99 ea DC096 86 350 5.7 V8 K,L,M,6,8 2 bolt main, non-roller, block #548 310 1955.99 ea VC96 86 350 5.7 V8 K,L,M,6,8 same as DC96 (above) except with valve covers, timing cover and oil pan 310 2059.99 ea DCA3 87-95 350 5.7 V8 7 EFI, 2 bolt main, roller cam, block #638, 548, 148, center valve cover bolts, will not fi t 1993 and up LT-1 310 1965.99 ea VCA3 87-95 350 5.7 V8 7 same as DCA3 (above) except with valve covers, timing cover and oil pan 310 2069.99 ea DCN7 89-92 350 5.7 V8 8 TPI, HO, roller cam, 2 bolt main, block #148, 548, 638, head #083, 217, will not fi t aluminum head Corvette 410 2159.99 ea DCM3 93-94 350 5.7 V8 P SFI, Gen II, LT-1, roller cam, aluminum heads, block #327, head #649, for 1993-94 Firebird 510 2769.99 ea DCF8 94-95 350 5.7 V8 P FI, LT-1, roller cam, cast iron heads, block #327, head #320 310 2494.99 ea DCR9 95 350 5.7 V8 P SFI, Gen II, LT-1, HO, roller cam, aluminum heads, block #327, head #374, for 1995 Firebird 510 2819.99 ea DCT1 96 350 5.7 V8 P LT-1, roller, cast iron heads, block #327, head #290 310 2569.99 ea DCT2 96-97 350 5.7 V8 P FI, LT-1, roller cam, aluminum head, block #327, head #649, for 1996-98 Firebird 610 2765.99 ea DP11 73-76 400 6.6 V8 R,S,Z no smog, block #988, 557. head #4x, 6x, 5c, 2-3/4" crank centering ring 410 2609.99 ea DP10 75-79 400 6.6 V8 R,S,Z smog, specify head #, 2-1/2" crank centering ring, 5 motor mount on left 4 on right side 410 2609.99 ea DP12 75-79 400 6.6 V8 R S,Z no smog, specify head #, 2-1/2" crank centering ring, 5 motor mount on left 4 on right 410 2609.99 ea DP67 76-79 400 6.6 V8 R,S,Z smog, block #557, 934, head #4x, 6x, 5c, 2-1/2" crank centering ring 410 2609.99 ea DO02 1977-79 403 6.6 V8 K AT, without smog holes in each head over the exhaust ports, block casting numbers 5572654B and 5544990 285 2449.99 ea DO12 1977-79 403 6.6 V8 K AT, with smog holes in each head over the exhaust ports, block casting numbers 5572654B and 5544990 285 2449.99 ea NFWG All No Fault Gold Warranty Program added protection program additional to the ATK 3-Year/Unlimited Mileage Standard Warranty 200.00 ea

Classic Industries® & ATK Team Up to Bring You The Best Remanufactured Engine in the Industry!

ATK is dedicated to continual improvement in the processes and procedures for every engine that they manufacture. This insures our ability to offer the very latest products and the highest quality remanufactured units in the industry. Their manufacturing techniques have been perfected to the point where they now offer us increased capacity, thus resulting in lower pricing on many applications. With an industry leading warranty, ATK is

now our top engine supplier. We are dedicated to distributing the highest quality engines in the market. We’re also dedicated to setting the industry standard in customer service. We believe that once you’ve experienced the quality of ATK products, you’ll agree there is no better engine source than ATK from Classic Industries®. Call today for complete details. Important: All engines come without valve covers, timing cover and oil pan unless otherwise noted. Shipped anywhere in the Continental United States for $50.00.

En

gin

es &

Co

mp

on

en

ts

444

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.govBluePrint Engines

355/375HP Flat TappetThe 355ci engine produces 375HP and 400 lbs of torque. Includes: Melling high volume oil pump, oil pan and chrome timing cover and valve covers. Just add your own fuel and ignition components.Note: This is not for use on pollution controlled vehicles.Specifi cationsHP: 375Torque: 400Engine Type: Chevy small block V8Displacement: 355ciBlock: 4 bolt main, 1 piece rear main sealCrankshaft: BluePrint cast steelRods: GM heavy beam /150,000 psi bolts Pistons: hypereutecticRings: Hastings molyCamshaft Type: Flat tappetCamshaft Lift: .480 in x .486 exDuration @ .050: 229 in x 230 exCylinder Heads: BluePrint aluminumChamber Size: 64ccValve Size: 2.02 in x 1.60 exCompression Ratio: 10.0:1Recommended Fuel: 91 octaneIgn. Timing: 34˚ total at 3500 RPMBP3551 355/375HP ...... 3244.99 ea 383/420HP RollerThis 383ci produces 420 HP and 440 lbs of torque. Rotating assembly balanced to within 2 grams. Includes: Melling high volume oil pump, aluminum dual plane intake manifold, oil pan, brass freeze plugs, hardened push rods, heavy-duty roller timing chain, chrome timing cover, and valve covers.Note: This is not for use on pollution controlled vehicles.Specifi cationsHP: 420Torque: 440Engine Type: Chevy small block V8Displacement: 383ciBlock: 4 bolt main, 1 pc rear main sealCrankshaft: BluePrint or Scat cast steelRods: GM heavy beam /150,000 psi bolts Pistons: hypereutecticRings: Hastings molyCamshaft Type: HYD rollerCamshaft Lift: .510 in x .520 exDuration @ .050-110˚ lobe separation: 230 in x 236 exCylinder Heads: Vortec cast ironChamber Size: 64ccValve Size: 2.02 in x 1.60 exCompression Ratio: 9.5:1Recommended Fuel: 91 octaneBP38312 383/420HP ... 3849.99 ea

355/390HP RollerThis 355ci engine produces 390 HP and 410 lbs of torque with an upgraded hydraulic roller cam. Includes: Melling high volume oil pump, oil pan, chrome timing cover, heavy-duty double roller timing set, and valve covers. Just add your own fuel and ignition components.Note: This is not for use on pollution controlled vehicles.Specifi cationsHP: 390Torque: 410Engine Type: Chevy small block V8Displacement: 355ciBlock: 4 bolt main, 1 piece rear main sealCrankshaft: BluePrint cast steelRods: GM heavy beam /150,000 psi bolts Pistons: hypereutecticRings: Hastings molyCamshaft Type: HYD rollerCamshaft Lift: .495 in x .503 exDuration @ .050: 220 in x 224 exCylinder Heads: BluePrint aluminumChamber Size: 64ccValve Size: 2.02 in x 1.60 exCompression Ratio: 10.1:1Recommended Fuel: 91 octaneIgn. Timing: 34˚ at 3500 RPMBP3552 355/390HP ...... 3659.99 ea

Vortec 355/385HPThis 355ci performance engine produces 385 HP and 405 lbs of torque when used with a performance carburetor and manifold combination. Includes: Melling high volume oil pump, oil pan and chrome timing cover, Professional Products dual plane intake manifold, heavy-duty double roller timing set, brass freeze plugs, and valve covers. Just add your own fuel and ignition components.Note: This is not for use on pollution controlled vehicles.Specifi cationsHP: 385Torque: 405Engine Type: Chevy small block V8Displacement: 355ciBlock: 4 bolt main, 1 piece rear main sealCrankshaft: BluePrint cast steelRods: GM heavy beam /150,000 psi bolts Pistons: Keith Black hypereutecticRings: Hastings molyCamshaft Type: fl at tappetCamshaft Lift: .480 in x .486 exDuration @ .050-112˚ lobe separation: 224 in x 230 exCylinder Heads: Vortec cast ironChamber Size: 64ccValve Size: 2.02 in x 1.60 exCompression Ratio: 9.5:1Recommended Fuel: 91 octaneBP3557 355/405HP ...... 3344.99 ea 383/430HP Stroker

The 383ci performance engine produces 430HP and 450 lbs of torque for your GM vehicle. Engine is bored .040 over. Includes: Melling high volume oil pump, oil pan and chrome timing cover and valve covers installed. Just add your own fuel and ignition components.Note: This is not for use on pollution controlled vehicles.Specifi cationsHP: 430Torque: 450Engine Type: Chevy small block V8Displacement: 383ciBlock: 4 bolt main, 1 pc rear main sealCrankshaft: BluePrint or Scat cast steelRods:GM heavy beam /150,000 psi bolts Pistons: hypereutecticRings: Hastings molyCamshaft Type: HYD rollerCamshaft Lift: .528 in x .536 exDuration @ .050-110˚lobe separation: 221 in x 226 exCylinder Heads: BluePrint aluminumChamber Size: 64ccValve Size: 2.21 in x 2.26 exCompression Ratio: 10.0:1Recommended Fuel: 91 octaneBP3831 383/430HP ... 4499.99 ea

383/440HP StrokerProduces 440 HP and 445 lbs of torque. Includes: brass freeze plugs, Melling high volume oil pump, oil pan, heavy-duty double roller timing set, chrome timing cover, and valve covers. Just add your own fuel and ignition components.Note: This is not for use on pollution controlled vehicles.Specifi cationsHP: 440Torque: 445Engine Type: Chevy small block V8Displacement: 383ciBlock: 4 bolt main, 1 piece rear main sealCrankshaft: BluePrint or Scat forgedRods: forged /150,000 psi bolts Pistons: forgedRings: Hastings molyCamshaft Type: HYD rollerCamshaft Lift: .536 in x .555 exDuration @ .050-113˚ lobe separation: 224 in x 236 exCylinder Heads: BluePrint aluminumChamber Size: 64ccValve Size: 2.02 in x 1.60 exCompression Ratio: 8.5:1Recommended Fuel: 91 octaneBP38311 383/440HP .. 6199.99 ea

BluePrint means fun, reliable horsepower that you can drive every day! That’s why you’ll fi nd our engines in all kinds of vehicles – from street rods and muscle cars, to 4 x 4’s and daily drivers. BluePrint Engines is large enough to bring competitive pricing and fi rst rate engines to the marketplace, yet small enough to give each and every engine the care, testing and engineering our customers demand and deserve. If you’ve been shopping for an engine, keep in mind the features that differentiate BluePrint Engines: Each dyno-tested engine includes the dyno-sheet, an industry leading 30-month/50k-mile warranty, and free technical support. With BluePrint Engines, you’re not just buying killer performance, you’re buying peace of mind!Important: Not for use in pollution controlled vehicles. Computer controlled vehicles may need updated chips or other modifi cations. All have RH oil indicator and tube.Note: Special order, prepaid only.

Performance Crate EnginesThree Ways to

Purchase!

From Basic . . .

. . . To “Plug and Play”

Base Engine

Base Dressed

Fully Dressed

Base engines include valve covers, oil pan, timing cover, brass freeze plugs and Dyno-test results shipped with engine. Choose your own intake, fuel system, and ignition components.

Fully dressed engines include aluminum intake manifold, fuel delivery, HEI distributor, chrome valve covers, brass freeze plugs, water pump, spark plugs, spark plug wires, dyno-tested and shipped with results.

Base dressed engines includes valve covers, oil pan, timing cover, aluminum intake, HEI distributor, carburetor, brass freeze plugs and dyno-test results shipped with engine.

High-Performance Crate Engines from

SPECIALSPECIALSHIPPING!SHIPPING!

KK

En

gin

es &

Co

mp

on

en

ts

445WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov BluePrint Engines

355/375HP w/Alum. HeadsThis 355ci engine produces 375HP and 400 lbs of torque. Includes: an oil pan, Melling high volume oil pump, valve covers, heavy-duty double roller timing set, timing cover, brass freeze plugs, BluePrint or MSD HEI distributor, BluePrint or Professional Products dual plane aluminum intake manifold, and Holley 600 cfm carburetor with electric choke.Note: This is not for use on pollution controlled vehicles.Specifi cationsHP: 375Torque: 400Engine Type: Chevy small block V8Displacement: 355ciBlock: 4 bolt main, 1 piece rear main sealCrankshaft: BluePrint cast steelRods: GM heavy beam /150,000 psi bolts Pistons: hypereutecticRings: Hastings molyCamshaft Type: fl et tappetCamshaft Lift: .480 in x .486 exDuration @ .050: 229 in x 230 exHeads: BluePrint aluminumChamber Size: 64ccValve Size: 2.02 in x 1.60 exCompression Ratio: 10.0:1Recommended Fuel: 91 octaneIgn. Timing: 34˚ at 3500 RPMBP3555 355/375HP .... 3949.99 ea

355/390HP w/Alum. HeadsThis 355ci engine produces 390HP and 410 lbs of torque. Includes: an oil pan, Melling high volume oil pump, valve covers, heavy-duty double roller timing set, timing cover, brass freeze plugs, BluePrint or MSD HEI distributor, BluePrint or Edelbrock dual plane aluminum intake manifold, and Holley 600 cfm carburetor with electric choke.Note: This is not for use on pollution controlled vehicles.Specifi cationsHP: 390Torque: 410Engine Type: Chevy small block V8Displacement: 355ciBlock: 4 bolt main, 1 piece rear main sealCrankshaft: BluePrint cast steelRods: GM heavy beam /150,000 psi bolts Pistons: hypereutecticRings: Hastings molyCamshaft Type: HYD rollerCamshaft Lift: .495 in x .503 exDuration @ .050-112˚ lobe separation: 220 in x 224 exHeads: BluePrint aluminumChamber Size: 64ccValve Size: 2.02 in x 1.60 exCompression Ratio: 10.0:1Recommended Fuel: 91 octaneIgn. Timing: 34˚ at 3500 RPMBP3553 355/390HP ... 4459.99 ea

Dressed Performance Crate Engines

Fully Dressed Performance Crate Engines

383/420HP w/Alum. HeadsThis 383ci engine with performance aluminum heads produces 420HP and 450 lbs of torque on pump gas. Includes: an oil pan, valve covers, timing cover, BluePrint or MSD distributor, BluePrint or Edelbrock aluminum intake manifold, 750 cfm Holley carburetor.Note: This is not for use on pollution controlled vehicles.Specifi cationsHP: 420Torque: 450Engine Type: Chevy small block V8Displacement: 383ciBlock: 4 bolt main, 1 piece rear main sealCrankshaft: BluePrint or Scat cast steelRods: GM heavy beam /150,000 psi bolts Pistons: hypereutecticRings: Hastings molyCamshaft Type: fl at tappetCamshaft Lift: .480 in x .486 exDuration @ .050: 229 in x 230 exCylinder Heads: BluePrint aluminumChamber Size: 64ccValve Size: 2.02 in x 1.60 exCompression Ratio: 10.0:1Recommended Fuel: 91 octaneIgnition Timing: 34˚ at 3500 RPMBP3839 383/420HP .... 4999.99 ea

383/430HP w/Alum. HeadsThis 383ci with 430HP and 450 lbs of torque in a “Ready-to-Run” pump gas package. Includes: oil pan, timing cover, valve covers, BluePrint or MSD distributor, BluePrint or Edelbrock aluminum dual plane intake manifold, 750 cfm Holley performance carburetor.Note: This is not for use on pollution controlled vehicles.Specifi cationsHP: 430Torque: 450Engine Type: Chevy small block V8Displacement: 383ciBlock: 4 bolt main, 1 piece rear main sealCrankshaft: BluePrint or Scat cast steelRods: GM heavy beam /150,000 psi boltsPistons: hypereutecticRings: HastingsCamshaft Type: HYD rollerCamshaft Lift: .528 in x .536 exDuration @ .050-110˚ lobe separation: 221 in x 236 exCylinder Heads: BluePrint aluminumChamber Size: 64ccValve Size: 2.02 in x 1.60 exCompression Ratio: 10.0:1Induction: carburetedRecommended Fuel: 91 octaneIgnition Timing: 34˚ at 3500 RPMBP3832 383/430HP .... 4999.99 ea

427/625HP LS3This 427ci engine offers 625HP and 550 lbs of torque in this balanced rotating assembly. Includes: retro fi t oil pan, timing cover, valve covers, premium single true roller timing set, GM factory roller rockers with upgraded full roller trunion, GMPP or Edelbrock single plane aluminum intake manifold, AED 850 cfm carburetor, coil packs and coil pack harness, crank, cam and MAP sensors. spark plug wires and wiring harness, harmonic balancer, and brass freeze plugs.Note: Ignition box required BluePrint recommends MSD 6012, Retro fi t oil pan will fi t most 1955-95 GM front engine, RWD, V8 cars.Specifi cationsHP: 625Torque: 550Engine Type: Chevy small block V8Displacement: 427ciBlock: new GM LS3/L92 aluminum blockCrankshaft: BluePrint or Scat forgedRods: forged I beamPistons: forged MahleRings: Mahle performanceCamshaft Type: HYD rollerCamshaft Lift: .628 in x .624 exDuration @ .050-114˚ lobe separation: 247 in x 263 exHeads: BluePrint LS3 aluminumChamber Size: 70ccValve Size: 2.165 in x 1.590 exCompression Ratio: 11.0:1Recommended Fuel: 91-93 octaneBP4272LS 427/625HP 10,499.99 ea

383/405HP StrokerThis 383ci engine produces 405+ HP and 440 lbs of torque in a “Ready-to-Run” package. This balanced rotating assembly is bored .040 over long slot stamped steel rockers, hardened pushrods. Includes: oil pan, Melling high volume oil pump, timing cover, heavy-duty double roller timing set, valve covers, BluePrint or MSD HEI distributor with spark plugs and wires, BluePrint or Professional products aluminum dual plane intake manifold, Holley 750 cfm carburetor with manual choke, fuel pump, water pump, and harmonic balancer.Note: This is not for use on pollution controlled vehicles.Specifi cationsHP: 405+Torque: 440Engine Type: Chevy small block V8Displacement: 383ciBlock: 4 bolt main, 1 piece rear main sealCrankshaft: BluePrint or Scat cast steelRods: GM heavy beamPistons: hypereutecticRings: Hastings molyCamshaft Type: Flat tappet hydraulic lifterCamshaft Lift: .487 in x .503 exDuration @ .050-112˚ lobe separation: 234 in x 244 exCylinder Heads: cast iron VortecChamber Size: 64ccValve Size: 2.02 in x 1.60 exCompression Ratio: 9.5:1Recommended Fuel: 91 octaneIgnition Timing: 34˚ total at 3500 RPMBP3834 383/405HP ... 4999.99 ea

427/750HP Stroker LS3This 427ci supercharged stroker engine produces 750HP and 740 lbs of torque. Includes: supercharger, electronic fuel injection, coil packs, oil pan, timing cover, valve covers, spark plugs and wires, LS3 intake manifold, and harmonic balancer.Note: This is not for use on pollution controlled vehicles.Specifi cationsHP: 750Torque: 740Engine Type: Chevy small block V8Displacement: 427ciBlock: 1 piece rear main sealCrankshaft: BluePrint or Scat forgedPistons: forgedRings: molyCamshaft Type: HYD rollerCamshaft Lift: .624 in x .624 exDuration @ .050-114˚ lobe separation: 239 in x 255 exHeads: BluePrint LS3 aluminumChamber Size: 68ccCompression Ratio: 10.8:1Recommended Fuel: 91-93 octaneIgnition Timing: Powertrain control moduleBP4273 427/750HP .. 18,999.99 ea

Vortec 355/385HPThis engine produces 385HP and 405 lbs of torque in a dyno-tested and tuned package. All fully dressed motors are dyno-proven, built from high-quality parts and come with balanced rotating assembly, hardened pushrods, oil pan, Melling high volume oil pump, timing cover, heavy-duty double roller timing set, chrome valve covers, BluePrint or MSD HEI distributor with spark plugs and wires, BluePrint or Professional products dual plane aluminum intake manifold, 750 cfm Holley carburetor with electric choke, fuel pump, water pump, and harmonic balancer.Note: This is not for use on pollution controlled vehicles.Specifi cationsHP: 385+Torque: 405+Engine Type: Chevy small block V8Displacement: 355ciBlock: 4 bolt main, 1 piece rear main sealCrankshaft: BluePrint cast steelRods: GM heavy beamPistons: Keith Black hypereutecticRings: Hastings molyCamshaft Type: Flat tappet hydraulic lifterCamshaft Lift: .480 in x .486 exDuration @ .050: 224 in x 230 exHeads: cast iron Vortec, seasoned and modifi ed by BluePrintChamber Size: 64ccValve Size: 2.02 in x 1.60 exCompression Ratio: 9.5:1Recommended Fuel: 91 octaneIgnition Timing: 34˚ at 3500 RPMBP3554 355/385HP .... 4499.99 ea

Each Engine Features a 30-Month/50k-Mile Warranty!

En

gin

es &

Co

mp

on

en

ts

446

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.govEngine Mounts

Motor Mount Bolt SetSecure any engine with complete confi dence with ARP’s rugged motor mount bolts. You can choose between black oxide fi nished 8740 chromoly or corrosion resistant stainless steel and choice of Hex or 12 point head. Sets come complete with fl at washers.

Chevrolet EngineMount to BlockAR13312 black oxide Hex head ........ 10.99 set AR13311 black oxide 12 point .......... 11.99 set AR43312 stainless Hex head ........ 14.99 set AR43311 stainless 12 point .......... 14.99 set Mount to FrameAR13315 black oxide Hex head ........ 8.99 set AR43315 stainless Hex head ........ 15.99 set

Pontiac EngineMount to BlockAR19312 black oxide Hex head ........ 14.99 set AR19311 black oxide 12 point .......... 15.99 set AR49312 stainless Hex head ........ 21.99 set AR49311 stainless 12 point .......... 25.99 set

1970-73 455 Motor Mount BoltsReplacement engine motor mount to frame bracket bolts for 1970-73 Firebird and TA models with 455ci engine. This long, specialized Hex head bolt features a round head marking for an authentic appearance.1253530 1970-73 2 piece ................. 14.99 pr

to frame

to engine

1970-81 Engine Conversion BracketThese mounting brackets will allow a correct reinstallation of the Olds 350 or 403 engine into a 1977-79 Pontiac Firebird. This set will also retrofi t 1970-76 or 1980-81 Pontiac Firebird models. This 4 piece engine conversion bracket set requires 2 motor mounts sold separately under item #T83168.Note: This set does not include mounting hardware.C269503 1970-81 Olds 350-403 ..... 144.99 ea

1970-81 Engine Conversion BracketsThis set facilitates the use of a 1964-69 Pontiac engine in a 1970-81 Pontiac Firebird chassis. Due to a 2 bolt mounting confi guration on 1964-69 Pontiac engine blocks, adapter brackets becomes necessary for proper engine positioning. Using this set will also allow Trans Am owners to use Shaker Hood systems. This 4 piece engine conversion bracket set requires 2 motor mounts sold separately under item #T83168.Note: This set does not include mounting hardware.C269513 1970-81 ............................... 144.99 set

1967-69 Engine Conversion BracketsThis set facilitates the use of a 1970-81 Pontiac engine in a 1967-69 Pontiac Firebird chassis. Due to a 3 bolt mounting confi guration on 1970-81 Pontiac engine blocks, adapter brackets becomes necessary for proper engine positioning. This 2 piece engine conversion bracket set converts 3 hole motor mount pad on block to a 2 hole mount.C269514 1967-69 1970-81 Pontiac .... 54.99 set

to frame

to engine

1977-79 Motor Mount to Frame Bracket BoltsReproduction motor mount bolts for 1977-79 Firebird Trans Am models with Oldsmobile 403 engine. These bolts hold the engine motor mount to the A-frame bracket and features correct tapered end.TA4001 1977-79 4 piece ................ 13.99 set

1977-79 Trans Am Motor Mount to Block BoltsReproduction motor mount bolts for 1977-79 Firebird Trans Am models with Oldsmobile 403 engine. These bolts hold engine motor mount to engine block and feature correct 3-A head marking as original. 8 piece bolt set.TA4002 1977-79 8 piece .................. 14.99 set

1977-79 Motor to Frame Mounting Bolt SetReproduction motor mount to frame mounting bolt set for 1977-79 Trans Am models with Oldsmobile 403 engine. This 24 piece set includes factory correct bolts, washers and nuts with TR head marking.TA4003 1977-79 24 piece ............... 24.99 set

Engine Mounts

1978-81 Motor Mount BracketCorrect original replacement bracket for 1978-81 Firebird models with small block engines. LH and RH brackets are interchangeable.Note: *Export and Canada only.332648 1978-79 305, 350-L ........... 29.99 ea 332648 1980-81 305-H .................. 29.99 ea 332648* 1981 267....................... 29.99 ea

1967-69 Firebird V8 Engine Frame MountsCorrect replacement engine frame mount brackets for all 1967-69 V8 equipped Firebird models. These frame mount brackets are stamped in steel and are ready-to-install. Sold in sets.K576 1967-69 LH and RH ........... 79.99 set

1973-97 Poly Clam Shell Motor Mount InsertMade of superior Hyper-Flex performance polyurethane material. This material is impervious to vehicle chemicals, road salt and oils. The redesigned GM “clam shell” style insert confi guration allows you to insert these performance mounts into your existing metal shells. Note: Specify color when ordering, add suffi x: G = black, R = red.31116 1973-92 zinc fi nish .............. 31.99 ea 31127 1993-97 zinc fi nish LH ........ 35.99 ea 31116 1993-97 zinc fi nish RH ........ 31.99 ea

1967-02 Motor MountIf your vehicle has 50,000 miles or more, the motor mounts have been damaged or soaked with oil over a period of time, chances are they have grown weak and are in need of replacement. Damaged or broken mounts can cause a dangerous condition. These reproduction motor mounts are an inexpensive cure.

6 Cylinder Motor MountsLeft or Right Hand InterchangeableT82284 1968-72 250 4.1,1 mount bolt 7.99 ea T83099 1973-76 250 4.1 ..................... 4.99 ea TT83208 1982-89 173 2.8 ..................... 5.99 ea T83208 1990-92 189 3.1 ..................... 5.99 ea T83208 1993-95 207 3.4 ..................... 5.99 ea Left Hand Side83066 1976 231 3.8 ..................... 5.99 ea T82383 1977-81 231 3.8 ..................... 19.99 ea T83208 1995-02 231 3.8 ..................... 5.99 ea Right Hand SideT83174 1976-81 231 3.8 ..................... 9.99 ea T82627 1989 231 3.8, 20th Ann .... 6.99 ea T82878 1995-02 231 3.8 ..................... 20.99 ea

8 Cylinder Motor MountsLeft or Right Hand InterchangeableT82254 1967-69 400 6.6 ..................... 6.99 ea T83168 1975-76 455 7.5 ..................... 9.99 ea T83168 1975-77 350 5.7, VIN P & M 9.99 ea T83168 1975-79 400 6.6 ..................... 9.99 ea T83032 1977 350-R 5.7 ................. 6.99 ea T83168 1977-79 403 6.6 ..................... 9.99 ea T83168 1977-81 301 4.9 ..................... 9.99 ea T83099 1977-92 305 5.0 ..................... 4.99 ea T83168 1978-79 350 5.7 ..................... 9.99 ea T83099 1980-81 265 4.3 ..................... 4.99 ea T83099 1981 267 4.4 ..................... 4.99 ea T83099 1987-92 350 5.7 ..................... 4.99 ea Left Hand SideT82256 1967 326 5.3 ..................... 11.99 ea T83120 1969-74 350 5.7 ..................... 6.99 ea T83120 1970-74 400 6.6 ..................... 6.99 ea T83120 1971-74 455 7.5 ..................... 6.99 ea Right Hand SideT82255 1967 326 5.3 ..................... 11.99 ea T83121 1969-74 350 5.7 ..................... 19.99 ea T83121 1970-74 400 6.6 ..................... 19.99 ea T83121 1971-74 455 7.5 ..................... 19.99 ea

332648

T82254 T83121G7279

1970-92 Motor Mount BoltReproduction or Genuine GM motor mount to frame mount bolts. Installs directly in the center of the motor mount bracket and attaches to the frame mount. 546283 1970-74 7/16"-14 x 6-5/8" ... 7.99 ea G7279 1975-92 7/16"-14 x 5-1/8" ... 6.95 ea

Small Block Chevy Motor Mount ShimsMotor mount shims allow increased engine height to provide additional clearance for headers, crossmembers and oil pans. Shims are 3/16" thick steel. Sold in pairs.T4125 3/16" shims ............................... 19.99 pr

KK

En

gin

es &

Co

mp

on

en

ts

447WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov Engine Tools

Max Energy Power ProgrammerThe Max Energy power programmer allows countless adjustments from shift points to speedometer calibrations for a wide range of gear ratios and tire sizes. It allows up to 1000 RPM adjustments of the rev limiter, the ability to change the top speed limiter and can be used to read and clear DTC’s. It updates via internet and can easily return the vehicle to stock tune, if necessary.Note: Not for sale or use in California.42500 1996-97 3.8L........................ 389.99 ea 42500 1996-04 4.6L (exc. Cobra)... 389.99 ea 42500 1999-04 4.6L (Cobra SVT).. 389.99 ea

Speedometer CalibratorThe Hypertech GM Speedometer Calibrator allows speedometer and odometer correction for on 2007-12 cars and trucks when changing to 2.56, 2.73, 3.08, 3.23, 3.42, 3.73, 4.10, 4.56, 4.88, or 5.13 gears. It can also clear DTC’s and make corrections for tires 24" to 54" in 1/4" increments. Completely user friendly and easy to use! It updates via internet and can easily return the vehicle to stock tune! 732501 2007-12 ................................ 229.99 ea

Specialty Engine Tools

Heavy-Duty Remote Starter SwitchStart and crank engine from under the hood or from either side of the vehicle. Ideal for compression test or bumping engine onto TDC (top dead center) timing marks for valve, distributor or camshaft adjustment. Convenient hot circuit red indicator light glows when starter switch is ready, light goes off when switch is depressed. Heavy-duty push button trigger switch, 5 foot heavy-duty leads, 12 gauge conductors. 20 amp, high current clips open to an extra wide 5/8" for easy hook up. Protective rubber boots prevent electrical shorts. Soft, non-slip rubber grip. Made in USA. AC7854 .............................................. 52.99 ea

Remote Starter SwitchAllows one person to start or crank engine from under the hood. Ideal for compression test or bumping engine onto TDC (top dead center) timing marks for valve, distributor or camshaft adjustment. Power tool type trigger switch for regular use with medium currents. Heavy-duty Neoprene leads. 10 amp, medium current clips open to 1/2". Protective rubber boots prevent electrical shorts. Ergonomic handle. One-year warranty. Made in USA. AC7853 ............................................... 12.99 ea

Advance Timing LightThis advance timing light features an all metal inductive pickup, bright Xenon fl ash, and one touch control. Available with a degree dialed knob for easy timing adjustments or a digitally controlled with LED display and tachometer functions. Detailed instructions included. AC7528 adjustable knob .................... 65.99 ea AC7529 LED display ......................... 91.99 ea

AutoTroubleshooterThis ingenious tool features automatic reverse polarity indication, automatic zero adjustment for Volts and amps for accurate measurements and overload protection on all ranges. Performs all standard electrical tests for on-car and bench troubleshooting. Locate faulty wiring, test electrical components, engine sensors, ignition and fuel systems and your starting/charging system. AC7677 ............................................. 55.99 ea

AutoAnalyzer Digital MultimeterPinpoint problem area and determine which components are faulty! Performs standard electrical tests for on-car and pm bench to locate faulty wiring, test electrical components, engine sensors, ignition and fuel systems and starting/charging system voltage. Features 19 ranges and automatic zero adjustment for Volts, amps, and battery tests, as well as an easy-to-read backlit LCD. Includes: color coded detachable test leads, alligator clips, and a comprehensive user manual. AC7665 ................................................ 35.99 ea

AC7528 AC7529 Remote Starting SwitchExcellent tool allowing easy engine starting from under the hood. Features heavy gauge, rubber covered copper wire. Simply depress the button to jog or start the engine. Made in USA.Y20750 ................................................ 15.99 ea

OBD II/ABS AutoScanner with Code ConnectThis OBD II scanner not only displays the diagnostic trouble codes, but also offers the most probable solutions for your specifi c vehicle when troubleshooting details are available thanks to the Code Connect database of 3 million verifi ed fi xes. Read and erase DTCs (Diagnostic Trouble Codes), display and reset MIL (Malfunction Indicator Lamp) status, read, record, and playback live sensor data, read and display I/M (Inspection/Maintenance) monitors. Other features include an OBD II emissions check and drive cycle mode, ABS code read/erase capability for most 1996 and newer GM, Ford, and Chrysler vehicles, a large, backlit LCD, a USB port for updates, and the capability of printing data via PC. Compatible with OBD II and CAN vehicles 1996 and newer.Note: Troubleshooting data in English only. AC9580 .............................................. 236.99 ea

AG728AG732

Engine Assembly GreaseUsed by Joe Gibbs Racing during the assembly of every NASCAR Sprint Cup and Nationwide Series engine. Unique formula dissolves in oil. Can be applied to ring lands in order to prevent micro welding during initial break-in. Combine with the Joe Gibbs BR break-in oil (part #BR106 or #BR107) for proven protection during break-in. AG728 1 pound can ............................. 22.99 ea AG732 1 oz. tube ................................. 3.99 ea

Max-Tuff Assembly LubeUltra tough, synthetic lubricant designed for use in reassembling repaired equipment. Utilizes durable synthetic molecules that adhere to metal surfaces and create an extremely strong barrier between surfaces minimizing the possibility of metal-to-metal contact while providing excellent protection against rust and corrosion to both ferrous and non-ferrous metals. Formulated with Royal Purple’s proprietary Synslide additive technology.RP01335 8 oz. bottle ......................... 18.99 ea RP12335 case of 12 ........................... 215.99 cs

Infrared Thermometer with Laser PointerAim this IR thermometer at the target, press a button, and read the temperature display. Verify the temperature in your AC system or fi nd an overcharge in your electrical systems. System On-Chip technology creates a compact, lightweight design with a measurement range of -58 degree F to +932 degree F (-50 degree C to +500 degree C). Includes two AAA batteries and belt holster. AC7876 ............................................... 65.99 ea

En

gin

es &

Co

mp

on

en

ts

448

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.govEngine Tools

1993-02 Performance ModulesJET Performance modules offer the most horsepower available for your Firebird when using a donor engine and computer system from a crate engine! Add up to 23 horsepower instantly with simple, plug-in installation! Only JET Performance programming provides exclusive, full range dynamic spectrum tuning of the air/fuel ratio, ignition advance, transmission and various other parameters. Each program is track and dyno-tested to ensure the most possible horsepower and drivability from each application. 50 state smog legal!

Stage 1Is for stock or mildly modifi ed vehicles. Fuel and timing curves are modifi ed for optimal performance and mileage using less expensive, lower octane fuels. Programming is designed to burn fuel at peak effi ciency, which results in improved performance and mileage. Daily drivers can use lower cost regular fuel for potential mileage gains, but for optimal performance gains use of mid-grade or better is recommended.5.7L - LT1JT19314 1993 AT ................... 155.99 ea JT19315 1993 MT .................. 155.99 ea JT19414 1994 AT ................... 249.99 ea JT19415 1994 MT .................. 249.99 ea JT19514 1995 AT ................... 249.99 ea JT19515 1995 MT .................. 249.99 ea JT19614 1996 AT ................... 249.99 ea JT19615 1996 MT .................. 249.99 ea JT19714 1997 AT ................... 249.99 ea JT19715 1997 MT .................. 249.99 ea 5.7L - LS1JT19814 1998 AT ................... 249.99 ea JT19815 1998 MT .................. 249.99 ea JT19914 1999 AT ................... 249.99 ea JT19915 1999 MT .................. 249.99 ea JT10014 2000 AT ................... 249.99 ea JT10015 2000-02 MT .................. 249.99 ea JT10114 2001-02 AT ................... 249.99 ea

Stage 2Is designed for the performance enthusiast, the Stage 2 features more aggressive programming to make the most horsepower and torque available. Fuel and timing curves are extensively modifi ed for peak performance and drivability. Requires use of 91 octane fuel, 180 degree thermostat and free fl ow exhaust. Also works well with aftermarket intake systems, mass air sensors, TBI spacers, etc. 5.7L - LT1JT19314S 1993 AT ................... 164.99 ea JT19315S 1993 MT .................. 164.99 ea JT19414S 1994 AT ................... 259.99 ea JT19415S 1994 MT .................. 259.99 ea JT19514S 1995 AT ................... 259.99 ea JT19515S 1995 MT .................. 259.99 ea JT19614S 1996 AT ................... 259.99 ea JT19615S 1996 MT .................. 259.99 ea JT19714S 1997 AT ................... 259.99 ea JT19715S 1997 MT .................. 259.99 ea 5.7L - LS1JT19814S 1998 AT ................... 259.99 ea JT19815S 1998 MT .................. 259.99 ea JT19914S 1999 AT ................... 259.99 ea JT19915S 1999 MT .................. 259.99 ea JT10014S 2000 AT ................... 259.99 ea JT10015S 2000-02 MT .................. 259.99 ea JT10114S 2001-02 AT ................... 259.99 ea

Motor Coater Engine Refi nishing SetKBS Motor Coater engine paint set has everything you need to do a superior job when you paint your engine, and even includes the step-by-step instructions needed to help you do it right. Motor Coater is easy to apply, offers superb coverage and yields a self-leveling professional looking fi nish brushed or sprayed. These engine enamels provide deep, rich pigmented colors for excellent coverage. Your engine will be a show stopper at this DIY price... too bad it’s kept under the hood! First, KBS special engine cleaner and degreaser eliminates all dirt, grease and oil. Next, use the RustBlast to dissolve rust and prep the metal. Then, rustproof and top coat your engine with KBS Motor Coater. All of this comes in one convenient set with thinner, gloves, a brush and a stir stick.RE1036 all years universal gloss black 59.99 set RE1057 all years universal aluminum .. 59.99 set RE1060 1966-72 Pontiac metallic blue 59.99 set RE1031 1977-83 GM corporate blue ... 59.99 set

Specialty Engine Tools 1999-02 LS1 Performance ProgrammerThe JET Performance Programmer lets you take control and program your own vehicle computer just the way you like it. Modify air and fuel ratios, ignition timing, shift points, shift fi rmness, speed limiter, and rev limiter settings. Exclusive JET Tri-Power tuning technology lets you tune for economy using lower cost regular fuel, or tune for performance using mid-grade or premium fuels. All three modes are designed to operate the engine at peak effi ciency to maximize horsepower and mileage for the given octane level. The programmer will also correct your speedometer and turn off the ABS system trouble light if you change tire size or gear ratios, modify the temperature that the cooling fan turns on and bypasses the skip shift mechanism on manual transmissions. A built in scan tool reads and clears diagnostic codes when your check engine light comes on, saving you a trip to the dealer.JT15029 1999-02 AT or MT ......... 339.99 ea

Power ChipsHypertech power chips increase performance and, in most cases, increase fuel effi ciency in stock, unmodifi ed vehicles. Simply replace the stock chip with the Hypertech Power Chip. Street Runner chips are designed to maximize street performance. Thermo Power chips are designed for high heat environments and hard competition driving.Important: All Hypertech chips require premium unleaded fuel of 91 octane or higher. Not legal for emissions controlled vehicles. Check local laws and regulations before ordering.Note: Thermo Master chips require a low temperature thermostat (160 degrees or 180 degrees recommended) . Special order only. 8th digit of VIN required when ordering.

Street Runner AT/MT PC212 1981-92 except TPI and LT1 .. 119.99 ea PC213 1985-92 TPI and LT1 .............. 199.99 ea Thermo Master AT/MT PC214 1981-92 except TPI and LT1 .. 129.99 ea PC215 1985-93 TPI and LT1 .............. 199.99 ea

Compression TesterCompression tester detects worn rings, burnt valves and blown head gaskets. Features external pressure release valve, full 2-1/2" easy-to-read face. U.S. and metric scales. 14" high pressure fl exible oil and grease resistant hose. 14mm and 18mm ends fi t most spark plug openings. Professional kit features a detachable hose and includes adapters for all standard spark plug threads, a repair kit with valves and rubber o-rings. AC7826 tester only ........................... 26.99 ea

1996-97 Dynamic Spectrum TunerJET’s DST software provides you with the tools needed for precise performance tuning using your laptop or PC. This comprehensive, easy to use software will give you the ability to modify virtually every aspect of the vehicle’s engine management system, including fuel and spark tables, speed and rev limiters, transmission functions, torque management tables, plus many other functions! Just plug your laptop into the vehicle’s diagnostic port using the supplied JET interface cable, and you’re set to go! The original programming is uploaded and saved to your PC so that it can be reloaded in the ECU at any point to return your car to its stock tune! JT14005 1996-97 LT1 ............... 399.99 ea

AN Hex WrenchesAffordable AN Hex wrenches. Color coded for fast identifi cation, these wrenches offer resistance to scratching hose fi ttings as they are being tightened and loosened.Individual AN Hex Wrenches 66970C #3 – 1/2" ................................... 12.99 ea 66971C #4 – 9/16" ................................. 12.99 ea 66972C #6 – 11/16" ............................... 12.99 ea 66973C #8 – 13/16" ............................... 14.99 ea 66974C #10 – 1" .................................... 16.99 ea 67727 3AN-8AN adjustable ................ 45.99 ea 67728 10AN-20AN adjustable ............ 58.99 ea AN Hex Wrench Sets 66978 8 piece, 1/2" - 1-3/16" .............. 93.99 set 67729 2 piece, 3AN-8AN & 10AN-20AN 95.99 set

66978

KK

En

gin

es &

Co

mp

on

en

ts

449WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov Engine Tools

Pontiac Engine Lift Bracket SetThese engine lift brackets are designed to bolt to the ends of each cylinder head to remove the engine from the vehicle. Brackets are made from .020" thick steel and have an .88" x 1.00" hook slot. Each is painted with epoxy coating and use either 3/8" or 7/16" mounting bolts. Grade 5 or higher bolts recommended. G9429 ............................ 19.99 set

Chevrolet Engine Lift BracketsLift brackets were installed on the intake manifold for quick assembly ease on the production line. Installing these engine lift brackets will help make removing and installing the engine easier by providing strong lift points. Available for small block (sb) Chevrolet V8 engines. One pair required per engine.HC70 universal sb .... 26.99 pr 1256601 1976-79 sb .... 23.99 pr

HC70

1964-79 Engine Lift HookThis original style lift hook is designed for 1964-79 Pontiac V8 engines. The hook mounts to the front of the timing chain cover on the right hand upper bolt. Manufactured from heavy gauge silver zinc-plated steel. A8700177 1964-79 ........ 7.99 ea

Rocker Stud ToolDesigned for not only removing rocker studs, but aligning as well.66783 ............................ 19.99 ea

Specialty Engine Tools

Mechanic’s StethoscopeLocates the source of engine noise quickly. Listen for trouble by tracing the sound of fl owing water, oil, gas, or steam. Identify piston slap, worn gears, faulty valves, water pump failure, and more! The handle is completely shock resistant. Disassembles for storage.Note: Keep this tool away from moving, rotating and electrical components.X835 ............................ 19.99 ea

Camshaft Installation HandleInstalling a camshaft just got easier by using the right tool. Perfect tool for all Chevrolet V6 and V8 engines.66897 V6 and V8 .......... 28.99 ea

Valve Spring CompressorFaster than conventional compressors because there is no need to readjust the tool after each spring.Note: When space prohibits use of cam handle, replace the handle with a bolt and turn the socket.Y16750 compressor ....... 35.99 ea

Valve Lash Wrench SetChoose from a variety of different wrench sets for valve lash adjustments. With 1/8" Allen66779 7/16" wrench...... 26.99 set With 3/16" and 1/8" Allen66778 1/2" wrench........ 26.99 set With 3/16" and 7/32" Allen66780 9/16" wrench...... 25.99 set 66781 5/8" wrench........ 25.99 set

66778

Cam Bearing Installation Tool66794 small block ......... 85.99 set

Engine Rotation AdapterCrankshaft rotation adapter for Chevrolet V8 engines allows the use of a 1/2" drive breaker bar or a 1" socket and breaker bar to rotate the crankshaft when turning the engine with the balancer already installed. 66782 ............................ 22.99 ea

66789

66787

Top Dead Center Locator66792 14mm threads ..... 12.99 ea

Oil Pump Primer66896 with bushing ....... 22.99 ea

Degree WheelsNote: *With degree wheel attachment.66787 degree wheel set 112.99 set 66791 9" degree wheel 18.99 ea Crankshaft Turning Sockets67491* small block ...... 24.99 ea 67492 big block .......... 28.99 ea

66787 Pushrod ToolUse this tool to check the length of pushrods on small block or big block Chevrolet engines. 66789 w/3/8" studs – sb.... 13.99 ea 66790 w/7/16" studs – sb.. 13.99 ea 66806 w/7/16" studs – bb 16.99 ea

Beam Type Torque WrenchDirectly measure a variety of torque values in English and metric when tightening fasteners with this non-ratcheting torque wrench. Pointer moves clockwise or counterclockwise. Easily calibrated by bending pointer to zero before use.X2955 1/4" fi xed, inch/lbs 49.99 ea X2956 3/8" fi xed, inch/lbs 71.99 ea X2957 1/2" fi xed, foot/lbs 69.99 ea

Flywheel TurnerThis tool hooks into the fl ywheel teeth to rotate the crankshaft. Use when working on clutches, transmissions, installing rings, or other jobs which require the crankshaft to be in a specifi c position. Spring tension aids tool engagement on the fl ywheel.X2270 ............................ 31.99 ea

X2957

The Engine TilterWorks with standard engine hoists to provide an additional axis to maneuver adjust the angle of the engine with a turn of the handle! The engine tilter is rated for 1200 pounds, made from steel, weighs only 14 pounds, and comes fully assembled. Includes an upper lap link and four 20" chains. Made in USA. MN2087 ....................... 154.99 ea

Thread DetectiveThis precise, easy to use thread identifi cation tool is well suited for distinguishing between similar inch and metric threads on both nuts and bolts. Available in a heavy-duty plastic box or attached to a wire lanyard. Includes both metric and inch nut and bolt sizes. TD700102 wire lanyard .. 34.99 set

Inch Thread Identifi ers6-32, 8-32, 10-24, 10-32, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20.

Metric Thread Identifi ersM4x0.7, M5x0.8, M6x1.0, M8x1.0, M8x1.25, M10x1.0, M10x1.25, M10x1.50, M12x1.25, M12x1.5, M12x1.75.

Crankshaft Turning SocketTwo separate sockets for turning the crankshaft. For use with small block or big block applications.66901 small block ......... 17.99 ea 66899 big block ............. 21.99 ea

66899

En

gin

es &

Co

mp

on

en

ts

450

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.govLS Conversion

LSA SuperchargerAdd horsepower to any LS engine with rectangular port L92 style heads! This is the same 1.9L supercharger found on the 6.2L LSA, in the CTS-V and Camaro ZL1 with a slightly different intercooler cover. A pair of Eaton four lobe high helix rotors makes this unit extremely effi cient at lower RPM but sustains the output into high RPM. On a 6.2L engine it produces about 9 lbs of boost but boost pressure may vary with engine displacement and compression ratio. Set includes: intake, fuel injectors, cast cover, intercooler, front pulley, throttle body, and gaskets. Installation requires proper tuning of the vehicle computer system along and a high pressure, high volume fuel pump. Intercooler requires a liquid cooling system consisting of a heat exchanger, a coolant tank and a coolant pump.Important: May not be legal for highway use in all 50 states. G25018 LSA supercharger set ........... 7769.99 set

LS9 6.2L/638HPThe Corvette ZR1 LS9 6.2L engine in a fully dressed crate engine package! The LS9’s lightweight reciprocating mass, sixth generation supercharger and high fl ow cylinder heads combine to provide 638 horsepower at 6500 RPM with a neck breaking 604 ft lbs of torque, making it the most powerful standard production motor GM has ever produced.LS376/515G25010 LS9/6.2L ....................... 17,322.99 ea

Supercharged!

LSA 2L/556HPThe supercharged 6.2L LSA engine from the Cadillac CTS-V and Camaro ZL-1 in a fully dressed crate engine package! This cousin of the Corvette LS9 produces 556 horsepower at 6100 RPM with 551 lbs of torque at 3800 RPM. It’s a rare engine that offers smooth and well-balanced performance. G25011 LSA/6.2L ....................... 12,919.99 ea

LS3 6.2L/376ciThe LS3’s aluminum block is fi lled with a sturdy reciprocating assembly that combines with L92 type rectangular port heads to deliver 10.7:1 compression. A high lift, hydraulic roller cam complements the LS3’s tremendous airfl ow capability and enhances its broad torque curve. Out of the crate, our LS3 comes with 430HP. If that’s not enough, our LS376/480 comes with a hot cam and bigger valves to dial up 495HP and 473 ft lb torque. Last, but not least, the most powerful naturally aspirated LS3 we offer is the third choice on the list, our LS375/525 that comes out of the crate with 525HP and 486 ft lb of torque!LS3 6.2L/376ciG13038 LS3/430HP ....................... 7546.99 ea G13039 LS376/495HP ................... 7876.99 ea G13151 LS376/525HP ................... 9193.99 ea

DR525 LSX Racing EngineThe DR525 is designed as the spec engine for NMCA’s LS Stock racing class in the LSX Showdown Challenge Series. The 6.2L (376 cubic inches) naturally aspirated engine is rated at 525 horsepower with 498 ft lb torque, and features several tamper-proof seals to ensure class compliance. And while it is the spec engine for the LS Stock class, it is legal in other NMCA/LSX Showdown Challenge classes and other drag racing series. It is offered with two part #s: G13176 includes Chevrolet Performance’s fourth generation F-Body oil pan while G13177 includes the muscle car oil pan for earlier models... your choice!Important: This Chevrolet Performance racing crate engine is purpose built for racing only, and has no warranty.G13177 DR525 w/musclecar pan ..... 9376.99 ea G13176 DR525 w/fourth gen oil pan 9322.99 ea

LS376/515 CarburetedUsing the LS3 engine as its foundation, the LS376/515 crate engine adds Chevrolet Performance’s racing derived ASA Hot Cam and a carbureted intake system to produce 533 horsepower at a high revving 6600 RPM and 477 ft lb of torque at 5200 RPM. It’s a great engine for resto-mod classic and late model muscle cars. The assembly includes an SS oil pan and LS3 cylinder heads, with high fl ow, rectangular port intake passages, as well as our unique, spider type carburetor intake manifold. It’s a great engine for resto-mod classic and late model muscle cars.G13052 LS376/515 .......................... 8573.99 ea

LS7 427ci/505HPWith its classic 427ci displacement and racing features, including featherweight titanium connecting rods, the 505HP LS7 7.0L made its mark in the Corvette Z06 and advanced its legacy in the fi fth gen Camaro Z/28. This powerful LS7 crate engine is based on the production specifi cations of the Gen 5 Z/28 application, including unique Tri-Y exhaust manifolds, which are designed to take advantage of the engine’s fi ring order to deliver a combination of pulse separation of adjacent fi ring cylinders and improved scavenging – all for optimal performance. LS7 427ci/505HPG9364 LS/427/505HP ................ 10,900.00 ea

LS Conversion Components

G13176

G13038

Supercharged!

TransmissionsTorque

Converters

Transmission Controllers

Transmission Install Kits

ZL1 SuperchargerGet more power out of your LS engine with a 1.9L supercharger lifted straight from the ZL1 production line! This supercharger is original equipment for the 6.2L LSA powered 2012-13 Camaro ZL1 and will bolt onto any LS engine using rectangular L92 heads. Produces approximately 9 pounds of boost on a 6.2L engine. Supercharger assembly features: 2 Eaton twin vortex high helix rotors, built-in water-to-air intercooler with front facing lines, intake with injectors, throttle body, front pulley, ribbed cast cover, and gasket set.Important: Requires a liquid cooling system with heat exchanger, coolant pump, and coolant tank, as well as a high pressure high volume fuel pump, and reprogramming or replacing the engine management system. Not legal for highway use on pollution controlled vehicles in all 50 States.Note: Special order, must be prepaid. G19300 ........................................... 8398.99 ea

For Drivetrain ComponentsRefer to Section M

LSA & LS9 Intercooler Fluid PumpThis factory engineered mechanical pump circulates coolant between the intercooler on top of the supercharger and heat exchanger for 6.2L LSA and 7.0L LS9 engines. It can also be installed with any forced induction system that uses a liquid to air intercooler. G25015 LSA/LS9 ............................ 289.99 ea

KK

En

gin

es &

Co

mp

on

en

ts

451WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov LS Conversion

LS Conversion Components

LSA 6.2L Accessory Drive SystemFront engine accessory drive system for the 6.2L and the CTS-V LSA engine with or without AC. The drive system assembly includes alternator, power steering pump, brackets, bolts, tensioners, pulleys, belts, and instructions. AC add-on set sold separately and includes mounting bracket, belt, AC compressor, hardware, and instructions.For LS3 EngineG13184 for LS3 with AC ............... 1069.99 set For LSA Engine G25012 for LSA without AC ......... 1246.99 set G25013 AC add on set for LSA ..... 389.99 set

LS Engine Controller SetsThe LS crate engines are some of the most advanced crate motors available, and if you’re installing one of these supercharged 6.2 liter beasts, you’ll need the electronics to keep these formidable engines under control. These sets include the hardware needed to wire and run LS crate engines. Each set includes: an engine specifi c ECM, wiring harness and fuse box, as well as MAF sensor with mounting boss, a pair of oxygen sensors with weld-in sensor bungs, an electronic accelerator assembly, and instructions.Important: This engine controller is a stand-alone retrofi t system for pre-1976 vehicles. Not for use with pollution controlled vehicles. G13178 for L96 #G13174 ............... 1660.99 set G13179 for LS3 #G13038 ............... 1525.99 set G13180 for LS376/480 #G13038 .... 1525.99 set G13181 for LS376/525 #G13151 .... 1573.99 set G13182 for DR525 #G13176, 77 .... 1766.99 set G13183 for LS7 #G9364 ................. 1515.99 set G25014 for LSA #G25011 .............. 1784.99 set G19299 for LS9 #G25010 ............... 1890.99 set

G25014

G25012

Front Runner DriveVintage Air’s Front Runner Drive features include a block mounted truss CNC-machined from T-6061 billet aluminum available in a bright fi nish with machined fi nished truss or black hard coat fi nish. The black hard coat sets include black hard coated pulleys and black anodized bracket, clutch and tensioner covers. Exclusive Front Runner spring tensioner provides continuous SAE-spec static and dynamic belt tensioning for OEM quality belt life. Hard coated aluminum pulleys are precision machined, reduce weight and wear like steel. Pulley sizes are engineered and matched for optimum component speeds. This is a very compact package that does not have any of the accessories hanging way past the engine. Each drive uses the compact GM Type II power steering pump (if applicable), high-performance water pump and GM 140 amp alternator. The Vintage Air TiteFit Line/compact compressor package is perfect for that nice tight and clean look.Important: Not compatible with any LT1 engine.Note: Shipped oversize.

Bright Front Runner DriveLS1/2 174014 with ps (includes pump) .... 2850.99 set 174016 with ps (without pump) ..... 2763.99 set 175015 without ps .......................... 2688.99 set LS7 174012 with ps (includes pump) .... 2909.99 set 174019 with ps (without pump) ..... 2763.99 set 175012 without ps .......................... 2688.99 set L92 LS Front Runner Spacer Set 176005 L92 LS ............................... 197.99 set

Black Hard Coat Front Runner DriveLS1/2 174011 with ps (includes pump) .... 2759.99 set 174017 with ps (without pump) ..... 2663.99 set 175011 without ps .......................... 2587.99 set LS7 174013 with ps (includes pump) .... 2808.99 set 174018 with ps (without pump) ..... 2663.99 set 175013 without ps .......................... 2587.99 set L92 LS Front Runner Spacer Set 176005 L92 LS ............................... 197.99 set

OS1

174014

detail – installed

LS Engine Coil Pack ShieldLS engine coil pack shield. Prevents premature coil failure due to overheating, eliminating the need to relocate. Semi-ridged construction made from double sided aluminum and high temperature foam core. They easily install under the coil brackets and work with factory and aftermarket coils. Fits LS1, 2, 3, and 7.DE011001 LS coil shields ................... 37.99 ea

detail installed LS Engine 4 Barrel Intake Manifold

Chevrolet Performance 4 barrel intake manifolds make it possible to install a modern, lightweight LS engine without fuel injection. These high fl ow intake manifolds were designed by GM to maximize performance potential. Manifolds are machined for 4150 style square fl ange carburetors. Includes mounting bolts and instructions. G58675 LS1, LS2, LS6 4 barrel ....... 621.99 ea G34401 LS3 4 barrel ......................... 442.99 ea G34394 LS7 4 barrel ......................... 442.99 ea

G58675 G34401

LSX 4 Barrel Intake ManifoldThe best way to feed an LSX engine is with air channeled through one of our LSX intake manifolds. Designed to match the performance capabilities of LSX heads and big displacement rotating assemblies. The high fl ow spider design is made of lightweight aluminum with plenty of material for builder specifi ed port work. Injector/nitrous boss cast in place. Includes installation hardware. G58676 LSX-LS3 dual plane ........ 578.99 ea G58677 LSX-LS3 single plane ..... 616.99 ea G58678 LSX-CT single plane ..... 683.99 ea G58679 LSX-CT single plane ..... 683.99 ea

G58676

Billet Serpentine SystemAll American Billet serpentine sets are a great way to clean up any engine compartment. You have a choice of machined fi nished, polished, or black silverline – black anodized with machined highlights for an aggressive modern look. Sets include high-performance accessories and are made in the USA. Brackets and pulleys are made from 6061-T6 aluminum. Sets include: aluminum water pump – Tuff Stuff or Edelbrock, polished 140 amp, 1 wire alternator, polished peanut style AC compressor, polished aluminum Type II power steering pump, polished power steering reservoir, tensioner with polished aluminum cover, Fluidampr harmonic balancer, polished 6061-T6 aluminum pulleys, polished 6061-T6 brackets, Gates 6 groove belt, and stainless steel hardware.Note: No Pontiac engine sets are available at this time.

Polished SystemLS1, 2, 3, and 6 with Tuff Stuff Water PumpA9721113 w/AC and power steering 2399.99 set LS1, 2, 3, and 6 with Edelbrock Water PumpA9721114 w/AC and power steering 2599.99 set

Black Silverline SystemLS1, 2, 3, and 6 with Tuff Stuff Water PumpA9722113 w/AC and power steering 2499.99 set LS1, 2, 3, and 6 with Edelbrock Water PumpA9722114 w/AC and power steering 2699.99 set

Machine Finish SystemLS1, 2, 3, and 6 with Tuff Stuff Water PumpA9723113 w/AC and power steering 2099.99 set LS1, 2, 3, and 6 with Edelbrock Water PumpA9723114 w/AC and power steering 2299.99 set

A9721113

A9722113

En

gin

es &

Co

mp

on

en

ts

452

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.govLS Conversion

LS Conversion Components

Billet Aluminum LS Valley CoverClean up the engine compartment of your carbureted LS powered Firebird with this billet aluminum valley cover from Billet Specialties. The highly polished ribbed design is a perfect compliment to Billet Specialties’ valve covers. They are engineered to fit LS2, LS3, LS7, and LSX blocks and accepts the OEM breather and gasket. Made in USA.Note: Will not work with D.O.D. blocks.B95050 LS ribbed – polished ... 179.99 ea B95059 LS plain – raw ............. 72.99 ea B95059B LS plain – black .......... 92.99 ea

LS Valve Cover Conversion SetBillet Specialties LS valve cover conversion set. This set allows the use of perimeter style small block Chevrolet valve covers on an LS motor. The coils, harnesses, and plug wires are all concealed underneath for a clean classic look. Precision machined from 6061-T6 billet aluminum to accommodate the large LS3 coils (AC Delco D514A). They retains the factory LS gasket for a leak free seal and feature a hidden oil fill cap on both sides. Stainless hardware included. Made in USA.Important: Will not work on 1997 LS1 heads casting numbers 806 or 933.Chevrolet ScriptB95037 LS ........................................ 496.99 set

LS Valve Cover AdaptersBillet Specialties LS valve cover adapters. This kit allows the use of perimeter style small block Chevrolet valve covers on an LS motor. This kit requires the relocation of the coil packs. Machined from 6061-T6 aluminum to utilizes an OEM LS valve cover gasket on bottom and cork gasket on the top. Stainless hardware included. Made in USA.Important: Will not work on 1997 LS1 heads casting numbers 806 or 933.Chevrolet ScriptB95030 LS ........................................ 169.99 pr

B95059

B95050

LS Valve Cover AdaptersLS valve cover adapters enable owners of LS engine equipped vehicles to bolt on a set of 1958-86 classic small block Chevrolet valve covers. Transform the look of your modern 4.8L, 5.3L and 6.0L LS engine, making it match your vehicle. Manufactured from 3/16" laser cut steel and painted black. Includes: adapter plates, adapter to head gasket and also includes mounting hardware.T6138 1958-86 .................................. 221.99 set

LS Coil Covers – Big-Block StyleThese coil covers from Holley Performance give modern LS engines a classic big block appearance. Made from a lightweight, durable composite that can be painted to match any color scheme and designed to fi t on LS2, LS3 and LS7 and other LS family engines using LS3 style valve covers and coils. Set includes: covers, OE style ball mount snap on studs, oil cap, oil fi ll adaptor, and detailed installation instructions.Important: Covers are a universal fi t and require trimming for proper installation. H2421 LS coil covers ....................... 212.99 pr

Fabricated Aluminum LS Coil CoversThese fabricated aluminum covers hide the unsightly coil packs on LS1 and LS6 engines with center bolt valve covers. Made from formed and welded aluminum they include a billet aluminum oil fi ll extension and mounting hardware. Coil covers are available in clear anodized and polished fi nishes.Note: Some applications may require modifi cation.A9700120 clear anodized ................. 119.99 pr A9700121 polished ........................... 119.99 pr

A9700120

Fabricated Aluminum LS Valve CoversThese valve covers are sure to dress-up any LS1 or LS6 engine that have center bolt heads. Made from formed and welded aluminum with coil mount provisions, these valve covers will stand out. Valve covers include an oil cap, mounting hardware with gaskets and are available in clear anodized or polished fi nishes.With Coil MountsA9700122 clear anodized ................ 111.99 pr A9700123 polished .......................... 109.99 pr Without Coil MountsA9700124 polished .......................... 114.99 pr

A9700123

Billet, Cast, and Fabricated LS Valve CoversBillet, cast, and fabricated aluminum valve covers for GM vehicles. These valve covers feature a screw-on aluminum oil fi ller cap, and are available in either machined or polished fi nish. The billet and cast valve covers fi t all LS and the fabricated covers fi t LS1 and LS6. All valve covers include mounting hardware, and the fabricated valve covers include gaskets. LS coil covers for LS1 and LS6 fabricated valve covers are made from formed and welded aluminum. Coil covers include a billet aluminum oil fi ll extension and mounting hardware.Note: Taller than stock. These valve covers are 1-3/4" tall. Some applications may require modifi cation.

LS Billet Valve CoversSmooth SurfaceVC50010 machined fi nish .................... 411.99 pr VC50011 polished fi nish ...................... 461.99 pr Ball Milled SurfaceVC50012 ball milled surface, machined 429.99 pr VC50013 ball milled surface, polished 479.99 pr

LS Cast Valve CoversSmooth SurfaceVC50014 smooth surface, polished ...... 169.99 pr Ball Milled SurfaceVC50015 ball milled surface, polished 154.99 pr

VC50011VC50015

Billet Aluminum LS Modular Valve CoversGive your LS engine a clean, classic look with these billet valve covers! Their modular design incorporates billet tops to cover the ignition coils and the oil cap to provide the appearance of traditional ribbed aluminum valve covers. Available in black anodized or mirror polished finish for LS1 and LS3 engines. Includes billet oil cap, polished ARP stainless steel hardware, and installation instructions. Made in USA.Important: Must be used with engine model specific OEM GM ignition coils.Ribbed95470 LS3 polished ................. 1134.99 pr 95475 LS3 black ...................... 1376.99 pr SmoothB95471 LS1 polished ................. 1112.99 pr B95476 LS1 black ...................... 1269.99 pr Chevrolet ScriptB95480 LS1 polished ................. 1212.99 pr B95485 LS1 black ...................... 1376.99 pr

95470 95475

LS Coil CoversNo need to relocate your coil packs with these beautiful covers machined from 6063 aluminum. Fit GM engines using existing mounting locations, available in black fi nish. Made in USA.P130 black fi nish ............................. 238.99 pr

KK

En

gin

es &

Co

mp

on

en

ts

453WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov LS Conversion

1993-02 LS Swap Trans CrossmembersLS swap transmission crossmembers and accessories provide for installation of a 4th generation T-56 or aftermarket T56 Magnum transmission in behind an LS engine in any 1993-02 Firebird. Transmission installation coverage can be expanded to include 4L60-4L70, or 4L80/4L85 transmissions through the use of available Hooker adapter brackets. Optional Hooker adjustable bolt-on torque arm bracket available to divorce stock torque arm from the stock transmission case mounting. The 4L80-4L85 installations will require notching/modifi cations to the body bracing on the driver side of transmission tunnel, the body notch panel is needed for this.Transmission CrossmembersA9700212 1993-97 ........................... 333.99 ea A9700213 1998-02 ........................... 274.99 ea Trans. Crossmember Adapter BracketA9700214 4L60-4L70 ...................... 30.99 ea A9700215 4L80-4L85 ...................... 30.99 ea Transmission Torque Arm BracketA9700216 ......................................... 82.99 ea Body Notch Panel A9700236 4L80-4L85 ...................... 56.99 ea

LS Conversion Components

1982-92 LS Swap Engine BracketsLS swap engine brackets for 1982-92 Firebird models. Broad transmission compatibility allows installation of GM 200R4, TH400, 4L60-4L70, 4L80/4L85 automatic transmissions and Tremec T56/T56 Magnum manual transmissions. These brackets also maintain the factory designed engine inclination angle (when used in conjunction with A9700209 crossmember). Plate steel construction.Note: Installation of these brackets requires the use of OE 4th generation F-Body engine mounts G5544.A9700208 1982-92 ............................. 144.99 pr

A9700210

1984-92 LS Swap Trans CrossmembersLS swap mounting system for 1984-92 Firebird models. Designed to provide an optimized balance of weight, stiffness and strength. Direct installation capability for aftermarket Tremec T56 Magnum transmissions. Installation of a 4L60-4L70, 4L80/4L85 automatic transmission can also be accomplished using this crossmember and the Hooker adapter kits A9700214 for 4L60-4L70 transmissions or A9700215 for 4L80/4L85 transmissions. Plate steel construction.A9700209 1984-92 ............................ 341.99 ea

A9700212

1967-92 LS Conversion SetsThis unique conversion system takes the guesswork out of installing an LS engine into a 1967-92 Firebird. The 1967-69 sets are designed to use the LH8 oil pan, the 1970-81 sets are designed to use the CTS-V or 1998-02 Firebird oil pan, and the 1982-92 sets are designed to use the 1998-02 Firebird oil pan, positioning the engine and transmission with room for most accessory drives, heater boxes, power steering and brakes, and exhaust systems. The motor mounts and transmission crossmember bolt directly to the factory mounting locations. Sets are available for T56, 4L60E, and 4L80E transmissions with your choice of red or black urethane transmission and motor mounts. Each set includes a transmission crossmember, engine and frame mounts, detailed instructions and mounting hardware. All mounts are protected by a manufacturer’s lifetime replacement warranty. Made in USA.Important: Transmission tunnel modifi cation may be required for T56 applications. Vehicles that did not originally have a V8 engine may require drilling new frame bracket mount locations.Note: Notching the frame is required when using 1998-02 Camaro accessory drive with low mount AC compressor. Some modifi cation may be required. Conversion with T-56 Transmission Mount 1060256 1967-69 with black mounts 499.99 set 1061856 1967-69 with red mounts .... 499.99 set 2060256 1970-81 with black mounts 499.99 set 2061856 1970-81 with red mounts .... 499.99 set 3060256 1982-92 with black mounts 489.99 set 3061856 1982-92 with red mounts .... 489.99 set Conversion with 4L60E Transmission Mount 1060260 1967-69 with black mounts 499.99 set 1061860 1967-69 with red mounts .... 499.99 set 2060260 1970-81 with black mounts 499.99 set 2061860 1970-81 with red mounts .... 499.99 set 3060260 1982-92 with black mounts 489.99 set 3061860 1982.92 with red mounts .... 489.99 set Conversion with 4L80E Transmission Mount 1060280 1967-69 with black mounts 499.99 set 1061880 1967-69 with red mounts .... 499.99 set

1060256

1061880

2061860

Adjustable LS Motor Mount Adapter SetAdapter allows the installation of LS engines into 1967-72 Firebird models using a standard 3 bolt motor mount. Position the engine in either the original location or 1"-2" forward to allow for transmission bellhousing clearance. Mounting locations allow proper driveline alignment and an additional 1/2" of adjustment. Includes: engine mounting plates, adjuster plates, hardware, and instructions.Note: Some aftermarket motor mounts may require mounting holes enlarged to 7/16". Some OEM style mounts may require additional clearance of the cast rubber portion to allow full front to back adjustment of the adapter. Not for use with “clamshell” type mounts.A9750010 adapter ............................. 171.99 set

LS1/LS6/Vortec Engine Mount PlatesThese engine mount plates are needed when installing an LS1, LS6 or Vortec engine into a vehicle that was originally equipped with a small block engine. Available in a 4 piece set that includes the plates and motor mount pads or the plates can be purchased separately. Includes Grade 8 hardware. 4592 2 plates with 2 pads ................... 74.99 set 4572 2 plates only ............................... 56.99 set

4592

FitRiteTM LS Engine Mount SetSet assists with swapping an LS series engine into your 1967-97 Firebird. The long adapter set allows the engine to move from 1/2" rearward (great for oil pan to crossmember clearance) or up to 3" forward for a full 3-1/2" of travel with a completely custom range of positions. Short adapter set moves the engine from 2-1/4" forward to 3-3/4" forward for a total of 1-1/2" of travel. These exclusive design, no-weld brackets are CNC laser cut steel and feature a durable black powder coated fi nish. Includes POLYPLUS™ engine mounts.Note: The short adapter works well with the low mounted air compressor.Long AdapterLS700200 2" rear – 3" forward ....... 129.99 set Short AdapterLS700201 2-1/4" fwd – 3-3/4" fwd 129.99 set

LS700201

1993-02 LS Swap Engine BracketsPerform an LS engine swap in any 4th-gen Firebird without having to swap out the stock LT1/LT4 engine K-member for a factory or aftermarket LS K-member. These brackets are designed for bolt-in installation onto the existing LT1/LT4 engine cradles. Provides same as factory LS engine and transmission location and inclination angle. Bracket to frame hardware included.A9700210 1993-97 LT1/LT4 ........ 230.99 pr A9700211 1993-02 3.4L/3.8L V6 230.99 pr

En

gin

es &

Co

mp

on

en

ts

454

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.govLS Conversion

LS Conversion Components

1967-81 Firebird Billet LSX Engine MountsEnhance the underhood appearance of your Firebird by replacing the OEM engine mounts with these universal style billet LSX engine mounts. Includes all required hardware and bushings for a complete installation. Available in a variety of fi nishes to suit your tastes. FB1110N 1967-81 natural .............. 269.99 setFB1110P 1967-81 polished ........... 299.99 setFB1110B 1967-81 black ................ 299.99 setFB1110C 1967-81 chrome ............. 324.99 set

FB1110P

LS Coil Relocation SetRelocation brackets allow you to remotely mount your coil packs. Made from 6061 aluminum. Black anodized. Designed to work with LS-2,3,7, and 9. Easy-to-install. Set includes: four brackets and all mounting hardware, including spacers (required when using Delphi coils). Made in USA.Note: Will not work with truck or LS-1 coils.P128 all ............................................ 180.99 set

SP3026C

SP3026C9

LS Series Carbon Fiber Engine CoversGive your LS series engine a cool custom look with these smooth top covers. These engine covers are real carbon fi ber custom fi t to your specifi c LS engine and accessory drive pulley setup and the option of a precut oil fi ller hole.Note: Specify vehicle year/model, type of LS engine and accessory belt drive setup and specify precut oil fi ller hole option and desired color. Special order.LSX Ignition Coil CoversSP3026C carbon fi ber ..................... 431.99 ea LS9 Engine Cover SP3026C9 carbon fi ber ..................... 449.99 ea

A700223

LS Engine Cover KitTake your engine bay to the next level with this customizable LS engine cover kit. Made in the USA from special temperature resistant automotive polycarbonate and features 6061 aluminum inserts. This kit is compatible with any automotive paint or hydro dipping for endless customizing options. The LS engine cover kit is engineered to fi t LS1, LS2, and LS3 passenger car intakes and coil packs only. Kit includes: valve covers, intake cover, cover inserts, ARP mounting hardware, billet oil fi ller, and aluminum stand-offs.Note: Some trimming may be required. Must install aftermarket fuel rail HC2123.A700221 LS1 .................................... 899.99 kit A700222 LS2 .................................... 949.99 kit A700223 LS3 .................................... 949.99 kit

Performer RPM LS1Looking to install a carburetor on an 1997-02 LS1? Edelbrock has you covered. This performer RPM manifold set includes the major components needed to install a 600-800 cfm carburetor on a modern LS1, LS6, LM7, LR4 and LQ4, maximizing maximum horsepower and torque from 1500 to 6500 RPM. The system includes a 4 barrel non-EGR manifold, MAP sensor, wiring harness and MSD ignition controller for LS1 24X ignition systems (offers choice of 6 timing curves), along with throttle and trans cable brackets.Note: 600-800 cfm carburetor recommended. Not legal for pollution controlled vehicles. E7118 manifold w/ignition control .. 789.99 set E71187 manifold only non-EGR ....... 319.99 ea

E7118

E71187

LS Coil Extension Harness SetThese coil harness extension sets includes two pigtails that give you the latitude to move your coils off the valve covers and to the fi rewall or where ever else you desire. Manufactured with factory color coded wires and weatherproof connectors. Set includes one driver side and one passenger side pigtail.60127 24" ........................................ 104.99 set 60128 36" ........................................ 104.99 set 60129 48" ........................................ 104.99 set

60129

PF48E AC Delco Oil FilterThis is the new “E-core” design replacement oil fi lter used in most GM LS series engine oil pans manufactured in 2007 and later. It features an M22 x 1.5mm thread. Element integrity (collapse strength) is increased by 25%. This is because the nylon cores are perfectly round. Filter media is no longer potted in adhesive which blocks fi ltration area at each end. Relief value performance is much improved and statisically more stable. PF48E filters meet performance specifi cations as defi ned by GM Powertrain. PF48E fi lters will be used in OE production in the near future.Important: This fi lter must be used if you are changing to a G12917 (12628771 GM) oil pan.Note: The PF48E supersedes the original oil fi lter, part #PF48. PF48E is slightly shorter and has a plastic “E-core” internal core design.LS Engines G13030 2006-15 ................................... 4.99 ea LS Engines with G12917(GM 12628771) Oil PanG13030 all ............................................ 4.99 ea

Features:• Hot oil durability is improved by elimination of adhesive.• Cold weather performance (-30 C) with dexos 1 oil

is excellent.• Improved level of robustness to water accumulation.• Nitrile material is used in the sealing gasket and includes

the anti-drain back valve.

LS30 Synthetic OilThis LS30 synthetic 5W-30 oil is specifi cally formulated for high-performance LS series engines such the 6.2L LS3 or the 6.2L supercharged LSA. Using advanced synthetic-based oils, LS30 delivers high temperature and high shear protection, making it ideal for high-performance LS engines, especially those that have been turbocharged or supercharged.

JG1320 5W30 quart .................... 11.99 ea JG1321 5W30 case of 12 quarts .. 129.99 cs

KK

En

gin

es &

Co

mp

on

en

ts

455WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov LS Conversion

1026200 1026102 – detail

LS Oil Pans for Conversion SetsThese OE pan sets include the gasket, windage tray, oil pickup tube, and mounting hardware. An optional oil pump pickup tube girdle corrects the fi t and seal of the pickup tube in the oil pump with an extra bolt to clamp it in place.Note: Must be used in conjunction with LS conversion sets. 1026100 LH8 oil pan ..................................................................... 279.99 set 1026102 LH8 machined for bypass valve ..................................... 329.99 set 1026200 1998-02 Firebird oil pan ................................................. 409.99 set 1026000 oil pick up tube girdle ..................................................... 26.99 ea

Billet LSX Oil Supply Adapter PlateOil supply adapter plate for LS1/LS2/LS3/LS6 (except LS7) engines. This is ideal for installing custom turbo or supercharger setups on LSX engines. Bolts above oil fi lter and supplies oil to your power-adder. Made from 6061 aluminum and is anodized black. Includes hardware.Note: Adapter plates are tapped for a 1/4" NPT fi tting.A9701329 ..................... 16.99 ea

LS Conversion Components

1955-87 Retrofi t LS Oil PansHolley’s Retro LS oil pans are designed for maximum chassis and ground clearance on 1955-87 GM rear wheel drive V8 applications originally equipped with a rear sump oil pan. Each pan is made from machined cast aluminum and uses an original style oil fi lter and gasket. Features provisions for a factory style oil cooler and attachment points for the factory bellhousing. Set includes: sump baffl e, pickup tube, sump plug, oil fi lter stud, and oil passage cover. H3021 LS Retrofi t oil pan is designed for LS engine retrofi t installation in a variety of GM muscle/classic car and truck models. H3022 LS Gen 1 F-Body Retrofi t oil pan is designed specifi cally for LS engine installation in 1967-69 Firebird models. The H3022 oil pan may also fi t other muscle/classic car and truck chassis where more engine to chassis clearance is required near the front half of the oil pan.Note: Requires the use of LS3 dipstick and dipstick tube. H3021 1955-87 universal .......................................................... 367.99 set H3022 1967-74 direct fi t ............................................................ 367.99 set

H3021H3022

Oil Pan Swap Kit for LS1 FirebirdThis oil pan is the pan of choice for most engine swaps as it provides the most steering rack clearance of any GM pan as well as generous ground clearance. Using a factory GM pan allows you to retain the structural rigidity of a cast aluminum pan. This pan bolts up to all GM Gen III and IV LS family engines. All parts are genuine GM factory parts.Important: Oil pan will work on most engine swaps. Always check measurements for oil pan clearance before ordering. Oil pan measurements are on our website.R74210 1998-02 Firebird with LS1 ...................................... 431.99 kit R74210 all GM Gen III & IV LS family engines ........ 431.99 kit

Aluminum LS Thermostat HousingsBillet Specialties aluminum thermostat housings for Chevy LS with 1-1/2" radiator hose. These water necks are precision machined from 6061-T6 billet aluminum to accommodate LS style thermostats and seals. Available in straight or 15 degree swivel designs and in polished or black anodized fi nishes. Made in USA. B90134 polish straight .... 41.99 ea B90134B black straight ..... 46.99 ea B90334 polish 15 degree 77.99 ea B90334B black 15 degree 82.99 ea

1982-92 Fuel/Brake Line Heat Shield

The fuel/brake line heat shield is specifically designed to shield the factory fuel and brake lines for a LS swap, attaches to the inside of the driver side subframe rail. This protects lines from radiant header/exhaust heat. Made from 304 stainless steel.A9700217 1982-92 ........ 56.99 ea

Kit Includes:Oil Pan with Gasket, Stock Baffl e, Drain Plug, and Mounting HardwareOil Dipstick Oil Dipstick Tube Oil Pickup TubeWindage Tray PF48E Oil Filter (required oil fi lter)

B90134

B90334B

1026102 d t il

1967-92 LS HeadersThese headers are designed for the LS engine mounting kits and are available in a variety of sizes and styles for 4.8L, 5.3L, and 6.0L LS engines. A silver ceramic coating keeps temperatures under control and provides a great long-lasting appearance. Designed to clear the factory AC box, power steering, power brakes, crossmember, and oil pan when installed with a LS conversion kit. Made in USA.Note: Some modifi cation may be necessary when used with 4L80E transmissions or column shifters. Not legal on pollution controlled vehicles. Mid-Length Headers 453661 1967-69 1-3/4" ........................................................ 629.99 set 451261 1970-81 1-3/4" ........................................................ 629.99 set 457261 1982-92 1-3/4" ........................................................ 629.99 set Long Tube Headers 453761 1967-69 1-3/4" ........................................................ 839.99 set 453961 1967-69 1-7/8" ........................................................ 864.99 set 454161 1967-69 2" .............................................................. 939.99 set 451361 1970-81 1-3/4" ........................................................ 839.99 set 451561 1970-81 1-7/8" ........................................................ 839.99 set 451761 1970-81 2" .............................................................. 939.99 set 457361 1982-92 1-3/4" ........................................................ 839.99 set 457561 1982-92 1-7/8" ........................................................ 839.99 set 457761 1982-92 2" .............................................................. 939.99 set Stepped Long Tube Headers 453861 1967-69 1-3/4 to 1-7/8" .......................................... 939.99 set 454061 1967-69 1-7/8" to 2" ............................................... 939.99 set 451461 1970-81 1-3/4" to 1-7/8" ......................................... 939.99 set 451661 1970-81 1-7/8" to 2" ............................................... 939.99 set 457461 1982-92 1-3/4" to 1-7/8" ......................................... 939.99 set 457661 1982-92 1-7/8" to 2" ............................................... 939.99 set

454061453961

En

gin

es &

Co

mp

on

en

ts

456

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.govLS Conversion

LS Conversion Components

1997-06 Crankshaft BalancerYou’ll need to know what balancer you have to be able to order the right belt system. Corvette is the thinnest while truck balancers are the thickest.Corvette – LS1, LS6G9361 1997-05 .................................. 138.99 ea IROC/TAG3888 1998-02 .................................. 100.99 ea C/K TruckG9363 2003-06 .................................. 169.99 ea

G9361 G3888

Alternator Adapter PlugsThese handy plugs will make your life much easier. They provide direct fi t connections without the trouble of splicing wires.SI ConversionCA27555 ext. to int. reg ......................... 18.99 ea

1998-02 LS1 Alternator Mounting SetEliminate excess belt length and tensioners. This set mounts the alternator with a shorter, manually adjusted belt. To use smaller pulleys, simply change belts. Black anodized aluminum construction. Includes hardware. For use with electric water pump without ps or AC.BX50004 1998-02 .............................. 169.99 set

LS Cast Iron Exhaust ManifoldsThese Hooker cast iron exhaust manifolds are designed to hug the engine block closely so they will work with a variety of LS engine swaps or as a replacement. The contoured shape increases fl ow and performance over stock manifolds with a traditional look. Fits all LS engines up to 500 horsepower except LS7 and LS9. Made from hi-silicon ductile iron for years of durability and corrosion resistance. Available in a range of different fi nishes. Important: Not C.A.R.B. certifi ed and may not be legal for use in some states on pollution controlled vehicles. 85010 raw fi nish .............................. 340.99 pr 85013 black ceramic fi nish ............. 454.99 pr 85011 silver ceramic fi nish ............. 454.99 pr 85014 titanium ceramic fi nish ......... 454.99 pr 85015 cast iron gray ceramic fi nish 454.99 pr

85010

LS Air IntakeDesigned for LS and LSX EFI crate engine installations, this kit contains polished intake tubes with provisions for mass airfl ow meter and vacuum line, reusable high-performance air fi lter and mounting hardware. When joined, the kit’s straight tube and elbow provide the optimal distance between the throttle opening and mass airfl ow meter saving you time and guesswork involved with fabricating a similar system. The mass airfl ow meter provision accepts all GM production meters, which must be purchased separately. Additional fabrication may be required.Note: Straight tube length must be maintained for accurate mass airfl ow meter operation.G13228 LS and LSX .......................... 515.99 ea

1982-92 LSX Cold Air Intake KitCold air intake kit for 1982-92 Firebird models with an LSX engine. This intake kit features 4" silicone tubing and works with various sizes of throttle bodies and mass air fl ow sensors. This kit also allows the air fi lter to be located on either driver or passenger. Includes red, cotton element air fi lter.A9701309 1982-92 ............................. 199.99 ea

1998-02 LS1 High Flow Air Box LidHigh fl ow air box lid for 1998-02 Firebird models equipped with an LS1 engine. This easy bolt-on air box eliminates the restrictive stock baffl es and resonator assembly to add up to 12 horsepower.Note: Not approved for sale or use in California or other states that require a CARB EO number.A9701349 1998-99 ............................ 89.99 ea A9701350 2000-02 ............................ 89.99 ea

A9701349

1998-00 LS1 EGR Intake Block OffLS1 EGR intake block off for your 1998-00 Firebird models. Made from brushed billet 6061 aluminum. Hardware is included.A970142A 1998-00 natural .............. 21.99 ea A970142B 1998-00 black ................ 21.99 ea

A970142B

LS7 Fuel Injection Intake ManifoldDesigned for your LS7 and LSX/LS7 style cylinder heads, these nylon manifolds are delivered fully assembled. Manifolds include injectors, fuel rail, 90mm ETC throttle body, and gaskets. This intake was originally used on the 2009 Corvette Z06 LS7 engine.G58682 LS7 and LSX/LS7 ............... 350.99 ea

LS3 Fuel Injection Intake ManifoldDesigned for your LS3 and LS3/L92 style cylinder heads, these nylon manifolds are delivered fully assembled. Manifolds include injectors, fuel rail, 90mm ETC throttle body, and gaskets. This intake was originally used on the 2009 Corvette LS3 engine.G58683 LS3 and LS3/L92 ................ 955.99 ea

BK5004

BK1709

LS1 and LS6 Intake ManifoldBoost horsepower and low end torque with this intake manifold from BBK. Designed for LS1 and LS6 engines, this intake improves the Z06 Corvette intake design with an 85mm straight through throttle inlet with rounded low restriction intake runners to allow an 18-24 horsepower increase on a base LS1 engine. Features a titanium powder coated fi nish and is available in sets with BBK Power Plus series 80mm throttle bodies with cable or electronic throttle controls. Uses factory rubber o-ring gaskets and includes mounting hardware and instructions.

BBK ManifoldsManifold Only BK5004 1997-04 .............................. 899.99 ea With Cable 80mm Throttle BodyBK5005 1997-04 .............................. 799.99 setWith Electronic 80mm Throttle BodyBK5006 1997-04 .............................. 799.99 set

BBK Throttle Body Only BK1709 1998-02 80mm .................... 359.99 ea BK1710 1998-02 85mm .................... 369.99 ea

BK5006

KK

En

gin

es &

Co

mp

on

en

ts

457WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Pontiac Style Track Serpentine ConversionThis serpentine belt conversion for Pontiac 326-455ci V8 engines customizes your engine bay and provides rigid support for the alternator and AC compressor with an optional bracket for models with power steering. Three separate idlers maintain belt to pulley contact for “no slip” operation once belt tension has been set with the convenient adjustment tool. Includes mounting hardware and instructions. Available in chrome or your choice of maintenance-free powder coating in clear, black onyx, or black. Made in USA.Important: Sets require a 1968 or newer 4 bolt balancer without V-groove and a 1969 or newer 11 bolt timing cover. 1970 and newer models require an electric fuel pump.Note: These sets do not include power steering hoses or remote reservoir. Sets Include:

• Chrome or Billet 105 amp Alternator • Alternator Pulley with Fan and Nose Cover• Chrome Sanden AC Compressor• Edelbrock Water Pump and Pulley• Alternator/AC Bracket• Crank pulley• 3 Idler Pulleys (2 on 13145 and 13150 Series Sets)• Belt Tensioning Tool• Mounting Hardware

Sets with Power Steering Also Include:• Power Steering Pulley with Nose Cover• Brackets• Mounting Hardware• GM Type 2 or Chrome Canister and Billet Canister Power Steering Pumps

1967-69 with AC and Type 2 PS PumpNote: Sets require a 71" 6 rib serpentine belt. 1314006 chrome ............................ 2329.99 set 13140 clear powder coated ........ 1849.99 set 1314007 black onyx powder coated 1959.99 set 1314008 black powder coated ....... 1965.99 set

1970+ with AC and Type 2 PS PumpNote: Sets require a 69.5" 6 rib serpentine belt. 1313506 chrome ............................ 2099.99 set 13135 clear powder coated ........ 1869.99 set 1313507 black onyx powder coated 2019.99 set 1313508 black powder coated ....... 1859.99 set

With AC without Power SteeringNote: Sets require a 68" 6 rib serpentine belt. 13130 clear powder coated ........ 1599.99 set 1313008 black powder coated ....... 1599.99 set

Without AC with Chrome PS PumpNote: Sets require a 65" 6 rib serpentine belt. 1314506 chrome ............................ 2329.99 set 13145 clear powder coated ........ 1679.99 set 1314508 black powder coated ....... 1679.99 set Without AC w/Billet Alt and PS Pump

Note: Sets require a 65" 6 rib serpentine belt. 13150 clear powder coated ........ 1899.99 set 1315008 black powder coated ....... 1899.99 set

Pontiac Sport Track Serpentine ConversionUpgrade your V-belt pulleys to a more effi cient serpentine system from March Performance and get style with no-slip operation. Each set features a stout one piece combination alternator and AC bracket and an oversize crank pulley to improve low speed cooling and charging. Choose from the Sport Track sets with black or silver powder coated bracket and black powder coated pulleys, or upgrade to Ultra Sport Track with clear powder coated brackets, pulleys, and pulley covers. Includes all applicable mounting hardware. Sets are available for Pontiac 326, 350, 389, 400, 421, 428, and 455ci V8 engines. Made in USA.Important: Sets require a 1968 or newer 4 bolt balancer without V-groove and a 1969 or newer 11 bolt timing cover. 1970 and newer models require an electric fuel pump.Note: Sets with Type 2 power steering pumps do not include hoses or remote reservoir. Sets Include:

• Tuff Stuff Chrome 105 amp Alternator• Alternator Pulley and Fan• Chrome Sanden AC Compressor• Edelbrock Water Pump and Pulley• Alternator/AC Bracket• Crank Pulley• 3 Idler Pulleys for Better Belt Wrap• Belt Tensioning Tool• Billet Pulley Cover Caps (Ultra Sets Only)

Sets with Power Steering Also Include:• Tuff Stuff GM Type 2 Power Steering Pump• Power Steering Pulley• Billet Pulley Cover Cap (Ultra Sets Only)• Power Steering Bracket

1967-69 with AC and Type 2 PS PumpNote: Sets require a 71" 6 rib serpentine belt.Sport Track 1320508 black powder coated ....... 1899.99 set 1320509 silver powder coated ....... 1779.99 set Ultra Sport Track 13225 clear powder coated ........ 2109.99 set

1970+ with AC and Type 2 PS PumpNote: Sets require a 69.5" 6 rib serpentine belt.Sport Track 1321508 black powder coated ....... 1729.99 set 1321509 silver powder coated ....... 1729.99 set Ultra Sport Track 13230 clear powder coated ........ 1901.99 set

With AC without Power SteeringNote: Sets require a 68" 6 rib serpentine belt.Sport Track 1320008 black powder coated ....... 1414.99 set 1320009 silver powder coated ....... 1446.99 set Ultra Sport Track 13220 clear powder coated ........ 1699.99 set

13225

13140

Three Idler Pulleys for No-Slip Operation! Three Idler Pulleys EnsureNo-Slip Operation!

Pontiac Revolver Serpentine ConversionThis serpentine belt conversion for Pontiac 326-455ci V8 engines customizes your engine bay and provides rigid support for the alternator and AC compressor with an optional separate bracket that allows for models with power steering. Three separate idlers maintain belt to pulley contact for “no slip” operation once belt tension has been set with the convenient adjustment tool. Includes mounting hardware and instructions. Available in chrome or your choice of maintenance-free powder coating in clear, black onyx, or black. Made in USA.Important: Sets require a 1968 or newer 4 bolt balancer without V-groove and a 1969 or newer 11 bolt timing cover. 1970 and newer models require an electric fuel pump.Note: These sets do not include power steering hoses or remote reservoir. Sets Include:

• Chrome 105 amp Alternator • Alternator Pulley with Fan and Nose Cover• Chrome Sanden AC Compressor• Edelbrock Water Pump and Pulley• Alternator/AC Bracket• Crank pulley• 3 Idler Pulleys for Better Belt Wrap • Belt Tensioning Tool• Mounting Hardware

Sets with Power Steering Also Include:• Power Steering Pulley with Nose Cover• Brackets• Mounting Hardware• GM Type 2 Power Steering Pump

1967-69 with AC and Type 2 PS PumpNote: Sets require a 71" 6 rib serpentine belt. 1317006 chrome ............................ 2329.99 set 13170 clear powder coated ........ 1919.99 set 1317007 black onyx powder coated 2084.99 set 1317008 black powder coated ....... 1901.99 set

1970+ with AC and Type 2 PS PumpNote: Sets require a 69.5" 6 rib serpentine belt. 1316506 chrome ............................ 2329.99 set 13165 clear powder coated ........ 1859.99 set 1316507 black onyx powder coated 2099.99 set 1316508 black powder coated ....... 1859.99 set

With AC without Power SteeringNote: Sets require a 68" 6 rib serpentine belt. 13160 clear powder coated ........ 1574.99 set 1316008 black powder coated ....... 1599.99 set

13170

March Performance Pulleys

Performance Pulleys

En

gin

es &

Co

mp

on

en

ts

458

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Pontiac V8 Serpentine Conversion 1967-up 326, 350, 389, 400, 455CI.Customize your engine compartment and virtually eliminate the risk of thrown belts with this one belt serpentine system. Each part is machined from solid 6061-T6 aluminum and fi nished with a maintenance-free clear powder coated to eliminate the need for polishing. Features stainless steel rods with chromoly ends to keep belt tension perfect. Made in USA.Important: Sets requires a 1968 or newer balancer (without V-groove), and a 1969 or newer standard rotation water pump (4-1/2") and an 11 bolt timing cover. Keyway type Saginaw ps pumps were used on 1971-74 Firebirds, press fi t type Saginaw ps pumps were used on 1975-79 Firebirds. Note: Serpentine belt not included. Alternator Only Sets Include:

• Crank pulley• Water pump pulley and nose cover• Alternator pulley with fan and nose cover• Alternator bracket with stainless steel tensioner

Power Steering Sets Include: • Power steering bracket and pulley• Power steering front and rear mounting brackets• Idler pulley with cover

Air Conditioning Sets Include:• AC clutch cover• AC front and rear mounting brackets• Stainless steel tensioning rod • Dual idlers with covers• All necessary hardware

All Inclusive Sets Include:• Chrome Tuff Stuff or billet alternator• Chrome Tuff Stuff AC compressor• Natural fi nish Edelbrock water pump• Chrome Tuff Stuff or billet ps pump

Alternator Only SetNote: Set requires a 49" 6 rib serpentine belt. 13100 .................................................................................................................................. 439.99 set

Alternator with Power Steering SetsNote: Set requires a 66" 6 rib serpentine belt. 13105 with keyway type ps pulley ...................................................................................... 659.99 set 13110 with press fi t type ps pulley ..................................................................................... 659.99 set

Alternator with Power Steering and AC SetsNote: Set requires a 94.5" 6 rib serpentine belt. 13120 with keyway type ps pulley ...................................................................................... 1074.99 set 13125 with press fi t type ps pulley ..................................................................................... 1074.99 set

All Inclusive Sets with Alternator and Power SteeringNote: Set requires a 66" 6 rib serpentine belt. A8700200 clear powder coated brackets with chrome accessories ........................................... 986.99 set A8700201 clear powder coated brackets with billet accessories ............................................... 1699.99 set A8700202 black powder coated brackets with billet accessories .............................................. 1181.99 set

All Inclusive Sets with Alternator Power Steering and ACNote: Set requires a 94.5" 6 rib serpentine belt. A8700203 clear powder coated brackets with chrome accessories ........................................... 1919.99 set A8700204 clear powder coated brackets with billet accessories ............................................... 2389.99 set A8700205 black powder coated brackets with billet accessories .............................................. 2075.99 set

March Performance Pulleys

Pontiac V-Groove PulleyPerformance Series pulleys increase horsepower by reducing accessory drag. 12.5-15 additional HP at the rear wheels is typical. Designed for normal street driving, these CNC-machined pulleys run perfectly true which eliminates belt throwing. Made of 6061-T6 aluminum for extra strength and wear resistance. Crank and water pump pulleys measure 6-1/8" in diameter and alternator pulleys measure 2-11/16" in diameter. Finished with a “No Polishing” clear powder coated. Important: Set requires 1968 or newer dampener, 1969 or newer water pump (4-1/2" long) and an 11 bolt timing cover. Optional power steering pulley, overdrive crank pulley and alternator fan sold separately.Single Groove Applications13011 1 groove crank pulley ............ 84.99 ea 13012 1 groove water pump pulley 94.99 ea 137 1 groove alt pulley w/cover ... 54.99 ea 13010 3 piece pulley set ................... 224.99 set Double Groove Applications13031 2 groove crank pulley ............ 89.99 ea 13032 2 groove water pump pulley 99.99 ea 137 1 groove alt pulley w/cover ... 54.99 ea 13030 3 piece pulley set ................... 229.99 set Triple Groove Applications13051 3 groove crank pulley ............ 94.99 ea 13032 2 groove water pump pulley 99.99 ea 137 1 groove alt pulley w/cover ... 54.99 ea 13050 3 piece pulley set ................... 239.99 set Overdrive Crank Pulley13041 3 groove 8" ............................ 109.99 ea Power Steering Pulley540 1 groove 6", keyway style ..... 74.99 ea Alternator Fan221 billet ...................................... 49.99 ea

Sanden AC Compressor ManifoldCustom AC compressor manifold for March Performance Pulley sets with 7176 compressors. It reroutes the compressor lines downward where they are less visible and less vulnerable to exhaust heat. Manifolds are available polished, chrome, or black. MP4181 polished ............................. 124.99 ea MP4182 chrome ............................... 144.99 ea MP4183 black .................................. 109.99 ea

MP4182

Billet Remote ReservoirThis billet aluminum power steering reservoir is designed for March Performance Pulley sets that use GM type 2 power steering pumps. Includes cap and billet aluminum mounting bracket. MP450 billet remote reservoir.......... 219.99 ea

1965-00 Braided Power Steering HosesThese braided stainless steel power steering hose sets are designed for March Performance Pulley sets that use GM type 2 power steering pumps with a remote reservoir. Includes three hoses that connect the pump and reservoir to the steering box. Cut to desired length.Note: For March pulley sets using GM type 2 steering pumps only.

Rack and Pinion Steering MP3211 1974-78 Mustang II ............ 229.99 set MP3244 1979-95 Mustang ................ 245.99 set GM Steering Box MP3222 1965-78 SAE inverted fl are 244.99 set MP3233 1979-00 metric o-ringed ..... 229.99 set

MP3244

Power steering pump with bolt hole or stud located here is required for kits that include power steering.

Power steering pump without hole or stud will NOT work.

YESNO

Power Steering Pump Requirements

Performance Pulleys

KK

En

gin

es &

Co

mp

on

en

ts

459WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov Performance Pulleys

Serpentine Belt Ultra SetChrome AC compressor and alternator. Tensioner and brackets include the housing covers. Water pump, alternator, and power steering pulleys with nose covers. Alternator pulley with machined fan includes nose cover.

Chevrolet Small Block Ultra SetsAlternator and AC Only – 61" Serpentine BeltMP202501 clear powder coated ................................................ 2019.99 set MP202502 chrome ..................................................................... 2559.99 set MP202504 black powder coated ............................................... 2042.99 set Alternator, AC, and Power Steering Pump – 62" Serpentine BeltMP202601 clear powder coated ................................................ 2289.99 set MP202602 chrome ..................................................................... 2924.99 set MP202604 black powder coated ............................................... 2059.99 set

Serpentine Belt Custom SetNon-polished AC compressor and alternator. Alternator pulley with standard steel bladed fan.

Chevrolet Small Block Custom SetsAlternator and AC Only – 61" Serpentine BeltMP202751 clear powder coated ................................................ 1499.99 set MP202754 black powder coated ............................................... 1602.99 set Alternator, AC, and Power Steering Pump – 62" Serpentine BeltMP202851 clear powder coated ................................................ 1749.99 set MP202854 black powder coated ............................................... 2344.99 set

“Ultra Drive” Front Mount Serpentine SetThis system has been designed to mount accessories below the valve covers and between the width of the heads on small block Chevrolet engines. Precision CNC-machined from 6061-T6 aluminum for strength and perfect fi t, hard coated on high wear areas and clear coated to eliminate polishing in those hard to reach places to look great for years to come. Set is designed to fi t Ram Jet, TPI, single and multi carb engines and includes an oversize crank pulley that aids in driving your alternator, AC and water pump at idle, where it counts.Note: Serpentine belts are not included in any of the sets, however the belt length is included below for information purposes. All sets include short reverse water pump. Power steering hoses and reservoir not included. Shipped overweight.

Serpentine Belt Deluxe SetChrome AC compressor and alternator. Tensioner and brackets include the housing covers. Alternator pulley with aluminum fan.

Chevrolet Small Block Deluxe SetsAlternator and AC Only – 61" Serpentine BeltMP202701 clear powder coated ................................................ 1799.99 set MP202704 black powder coated ............................................... 1822.99 set Alternator, AC, and Power Steering Pump – 62" Serpentine BeltMP202801 clear powder coated ................................................ 2079.99 set MP202804 black powder coated ............................................... 2079.99 set

Chevrolet Small Block Revolver Serpentine SetAlternator and AC Only

Without Power Steering for 59" Serpentine BeltsMP211101 clear powder coated ................................................ 1584.99 set MP211102 chrome ..................................................................... 1959.99 set MP211103 black onyx powder coated ...................................... 1634.99 set MP211104 black powder coated ............................................... 1484.99 set

Keyway Saginaw Pump and CanisterWith Power Steering for 64" Serpentine BeltsMP211651 clear powder coated ................................................ 1899.99 set MP211652 chrome ..................................................................... 2259.99 set MP211153 black onyx powder coated ...................................... 1949.99 set MP211654 black powder coated ............................................... 1770.99 set

Type 2 Power Steering PumpWith Power Steering for 62" Serpentine Belts MP211601 clear powder coated ................................................ 1794.99 set MP211602 chrome ..................................................................... 2294.99 set MP211603 black onyx powder coated ...................................... 1949.99 set MP211604 black powder coated ............................................... 1794.99 set

“Revolver” Serpentine Set for Short Water PumpThis serpentine conversion offers the same combination of style and low price as the popular Style Track alternator, AC and power steering set, but cool Revolver styling. The styled one piece bracket provides a rigid support for the alternator and AC compressor; a separate bracket allows the option of power steering or no power steering. The Revolver uses a unique, easy to use belt tension adjustment tool. Once the belt tension has been set, the adjustment tool is easily removed and stowed away until the next time the belt requires adjustment. The Revolver offers a much cleaner appearance as a result. Includes instructions and hardware. Features maintenance-free clear, black, or black onyx powder coated or chromed .Important: No cylinder head accessory holes needed for mounting. Serpentine belt is not included with any set. Lengths of belts are listed below and are also listed in the instructions. Power steering hoses and reservoir not included. Note: Shipped overweight.

black onyxpowder coated fi nish

chrome fi nish

chrome fi nish

clear powder coated fi nish

clearpowder coated fi nish

black powder coated fi nish

blackpowder coated fi nish

March Performance Pulleys

shown with optional MP4182 AC manifold

Available Finishes

Available Finishes

Sets Include:• AC Compressor• 140 amp Alternator• Aluminum Reverse Rotation Water Pump• GM Type 2 Power Steering Pump• Spring Loaded Tensioner• AC, Alternator and Power Steering Brackets• Crankshaft Pulley

• Water Pump Pulley• Power Steering Pulley• Alternator Pulley with Fan• Wing Cross Emblem• AC Line Fittings• Grade 8 Mounting Hardware

Sets Include:• Chrome AC Compressor• Chrome 105 amp Alternator• Aluminum Reverse Rotation Water Pump• GM Type 2 Power Steering Pump or Chrome Saginaw Power Steering Pump• AC, Alternator and Power Steering Brackets

• Crankshaft Pulley• Water Pump Pulley• Power Steering Pulley with Cover• Alternator Pulley with Machined Fan and Nose Cover• Belt Tensioning Tool• Grade 8 Mounting Hardware

En

gin

es &

Co

mp

on

en

ts

460

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Small Block Chevrolet V-Belt Pulley SetPerformance pulleys can free up to an additional 12-15 horsepower at the rear wheels by reducing accessory drag and eliminate belt throwing. The high water fl ow ratio V-belt pulley sets are designed for daily street driving, they aid cooling by increasing water fl ow and fan speed. Both sets are precision CNC-machined from 6061-T6 aluminum to run perfectly true. Designed for extra strength and fi nished with a “no polishing” clear powder coated. All sets include a crank pulley, water pump pulley and single groove alternator pulley.

Performance – Short Water PumpMP6010 1V crank, 1V water pump............................................... 199.99 set MP6015 2V crank, 1V water pump............................................... 226.99 set MP6030 2V crank, 2V water pump............................................... 243.99 set MP5090 3V crank, 2V water pump............................................... 239.99 set

Performance – Long Water PumpsMP6050 1V crank, 1V water pump............................................... 214.99 set MP6070 2V crank, 1V water pump............................................... 219.99 set MP6090 3V crank, 2V water pump............................................... 224.99 set MP6095 3V crank, 3V water pump............................................... 244.99 set

High Flow – Short Water PumpsMP6110 1V crank, 1V water pump............................................... 209.99 set MP6120 2V crank, 2V water pump............................................... 224.99 set MP6130 2V crank, 1V water pump............................................... 229.99 set MP6140 3V crank, 2V water pump............................................... 242.99 set

High Flow – Long Water PumpsMP6160 1V crank, 1V water pump............................................... 231.99 set MP6170 2V crank, 1V water pump............................................... 234.99 set MP6190 3V crank, 2V water pump............................................... 239.99 set

Small Block Chevrolet Performance Serpentine Ultra SetUltra Set without Power Steering

Note: Sets require a 42.5" alternator belt.MP220131 clear powder coated .................................................. 399.99 set MP220134 black powder coated ................................................. 399.99 set

Ultra Set with Power SteeringNote: Sets require 42.5" alternator belt and 33.5" 5 rib power steering belt.1966-74 Keyway Saginaw Pump and CanisterMP220231 clear powder coated .................................................. 584.99 set MP220234 black powder coated ................................................. 584.99 set 1978-87 Press Fit Saginaw Pump with CanisterMP220331 clear powder coated .................................................. 584.99 set MP220334 black powder coated ................................................. 584.99 set 1978-87 Press Fit Saginaw Metric PumpMP220381 clear powder coated .................................................. 584.99 set MP220384 black powder coated ................................................. 584.99 set

Small Block Chevrolet High Water Flow Serpentine Ultra SetUltra Set without Power Steering

Note: Sets require a 42.5" alternator belt.MP220431 clear powder coated .................................................. 399.99 set MP220434 black powder coated ................................................. 399.99 set

Ultra Set with Power SteeringNote: Sets require 42.5" alternator belt and 33.5" 5 rib power steering belt.1966-74 Keyway Saginaw Pump and CanisterMP220531 clear powder coated .................................................. 584.99 set MP220534 black powder coated ................................................. 584.99 set 1978-87 Press Fit Saginaw Pump with CanisterMP220631 clear powder coated .................................................. 593.99 set MP220634 black powder coated ................................................. 584.99 set 1978-87 Press Fit Saginaw Metric PumpMP220681 clear powder coated .................................................. 584.99 set MP220684 black powder coated ................................................. 584.99 set

“Mid Mount” Alternator and Power Steering Serpentine Conversion Ultra Sets for Long Water PumpSimple yet exceptionally styled, this new “Mid Mount” alternator and power steering serpentine set for small block Chevrolet engines offers an exciting new look! A new higher mounted power steering pump bracket helps clear the steering gearbox in some vehicles. Retains your standard rotation water pump. Available with performance pulleys which increase horsepower or high water fl ow ratios pulleys for increased cooling. CNC-machined from solid billet 6061-T6 aluminum for a spectacular machined fi nish with perfect fi t and extra high strength. Designed for a great appearance from any angle, these brackets are even machined on the engine facing side. All billet pulleys and brackets have a “no polishing” maintenance-free clear powder coating. Also available black powder coated.Note: Serpentine belts are not included with sets. Length of belt is listed below and also listed in the instructions. All alternator belts are 6 rib. Alternators, power steering pump and water pump not included.

March Performance Pulleys

Small Block Chevrolet Pro-Track Serpentine SetsWithout Power Steering

Serpentine Sets for 59" BeltsMP211151 clear powder coated ................................................ 1584.99 set MP211152 chrome ..................................................................... 2084.99 set MP211153 black onyx powder coated ...................................... 1734.99 set MP211154 black powder coated ............................................... 1584.99 set

With Power SteeringRemote Type Reservoir Power Steering – 62" BeltsMP211201 clear powder coated ................................................ 1894.99 set MP211202 chrome ..................................................................... 2351.99 set MP211203 black onyx powder coated ...................................... 2044.99 set MP211204 black powder coated ............................................... 1894.99 set Saginaw Type Reservoir Power Steering – 64" BeltsMP211251 clear powder coated ................................................ 1994.99 set MP211252 chrome ..................................................................... 2299.99 set MP211253 black onyx powder coated ...................................... 2119.99 set MP211254 black powder coated ............................................... 1994.99 set

“Pro-Track” Serpentine SystemMarch Performance’s new billet aluminum Pro-Track serpentine system for small block Chevrolet engines features a 1" thick one piece alternator and air conditioning bracket. A separate bracket allows the option of remote or canister style power steering. Adjustment tool is removable and included. Available powder coated in clear, black, black onyx, or chromed.Note: Serpentine belt is not included with any set, however length of belt is listed below and included in the instructions. Power steering hoses and reservoir not included. Shipped overweight.

clear powder coated fi nish

black powder coated fi nish

Performance Pulleys

Available Finishes

Performance Sets Include:• Crank Shaft Pulley• Water Pump Pulley with Cover• Alternator Pulley with Fan and Cover• Alternator Bracket with Relocation Arm• Alternator Bracket Adjustment Tool• Stainless Steel Tensioning Rod

Sets Include:• Chrome AC Compressor• Chrome 105 amp Alternator• Aluminum Reverse Rotation Water Pump• GM Type 2 Power Steering Pump• AC, Alternator, and Power Steering Brackets• Crankshaft Pulley

High Water Flow Sets Include:• Chromoly Rod Ends• Mounting Hardware• Power Steering Bracket• Power Steering Pulley

MP6090

• Water Pump Pulley• AC Compressor Cover• Alternator Pulley with Machined Fan & Cover• Power Steering Pulley & Cover• Grade 8 Mounting Hardware• Belt Tensioning Tool

KK

En

gin

es &

Co

mp

on

en

ts

461WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

1969-86 Reproduction Crankshaft PulleyReplace the damaged or missing original crankshaft pulley on your small block or Pontiac engine with one of our fi ne reproductions. Our reproduction pulleys are manufactured with great attention to detail and feature correct markings as original. Applications are available for small block Chevy and Pontiac engines.Note: *Except 63A or 80A alternator. K1055 is a reconditioned GM pulley.

Chevrolet EnginesDouble Groove without AC, 6-7/8" DiameterK1055 1976-78 305, 350-L, ........ 109.99 ea K1055* 1979 305, 350-L ......... 109.99 ea K1055 1981 267, 305-H, ........ 109.99 ea K1055 1982-85 305-H w/42A alt 109.99 ea Triple Groove with AC, 7-11/16" Diameter3972180 1977-86 ........................... 72.99 ea

Pontiac V8 EnginesSingle Groove without AC/PS, 7-1/4" DiameterGM #9790947YD F12364 1969-70 exc. RA5 ............ 74.99 ea Single Groove with AC, 7-1/16" DiameterGM #480509XS A8700120 1970-75 ........................... 41.99 ea Double Groove without AC, with PS, 7-1/4" DiameterGM #9790846YA A8700121 1968-70 350-400 .............. 62.99 ea Double Groove with AC, 7-3/16" DiameterGM #480508XR A8700122 1970 ........................... 71.99 ea

F12364 A8700120

K1055

A8700121 A8700122

Performance Pulleys

Air Cleaners forMarch Performance Pulley Systems

Billet valve cover emblems and air cleaners for March Performance pulley systems. Complement the style of your engine’s pulley system with these accessories. Fits 5-1/8" standard carburetor necks. Made in USA.

Billet Aluminum Air Cleaners MN2659 Grande Style Track, chrome 879.99 ea MN2660 Grande Revolver, chrome ... 879.99 ea MN2662 Style Track, chrome ............ 909.99 ea MN2663 Revolver, chrome ............... 849.99 ea MN2664 Pro Track, chrome ............... 889.99 ea MN2665 Pro Track, black onyx ......... 889.99 ea MN2666 Pro Track Fuelie, chrome .... 1299.99 ea MN2667 Futura, clear powder coated 469.99 ea MN2668 Futura, chrome fi nish .......... 619.99 ea

Performance V-Belt Pulley SetsMarch performance under drive V-Belt pulleys can free up 12-15 horsepower at the rear wheels. March performance pulleys eliminate belt throwing and reduce accessory drag. They also aid in cooling by increasing water pump speed. Designed with “no polishing needed” clear powder coated. All sets include: crank pulley, water pump pulley, and alternator pulley with cover.Important: *Requires 1980’s style water pump for clearance or any aftermarket water pump.

Performance Ratio Pulley Sets Short Water Pumps

Small BlockMP6010 1V crank, 1V pump, 1V alt 199.99 set MP6015 2V crank, 1V pump, 1V alt 226.99 set MP6030 2V crank, 2V pump, 1V alt 243.99 set MP5090 3V crank, 2V pump, 1V alt 239.99 set Big BlockMP7510 1V crank, 1V pump, 1V alt 214.99 set MP7550 3V crank, 2V pump, 1V alt 249.99 set

Long Water PumpsSmall BlockMP6050 1V crank, 1V pump, 1V alt 214.99 set MP6070 2V crank, 1V pump, 1V alt 219.99 set MP6090 3V crank, 2V pump, 1V alt 224.99 set MP6095 3V crank, 3V pump, 1V alt 244.99 set Big BlockMP7005 1V crank, 1V pump, 1V alt 226.99 set MP7015 2V crank, 1V pump, 1V alt 219.99 set MP7020 2V crank, 2V pump, 1V alt 219.99 set MP7050* 3V crank, 1V pump, 1V alt 212.99 set

High Flow Ratio Pulley SetsShort Water Pumps

Small BlockMP6110 1V crank, 1V pump, 1V alt 209.99 set MP6120 2V crank, 2V pump, 1V alt 224.99 set MP6130 2V crank, 1V pump, 1V alt 229.99 set MP6140 3V crank, 2V pump, 1V alt 242.99 set Big BlockMP7710 1V crank, 1V pump, 1V alt 229.99 set MP7730 2V crank, 2V pump, 1V alt 244.99 set MP7750 3V crank, 2V pump, 1V alt 246.99 set

Long Water PumpsSmall BlockMP6160 1V crank, 1V pump, 1V alt 231.99 set MP6170 2V crank, 1V pump, 1V alt 234.99 set MP6190 3V crank, 2V pump, 1V alt 239.99 set Big BlockMP7105 1V crank, 1V pump, 1V alt 237.99 set MP7115 2V crank, 1V pump, 1V alt 244.99 set MP7140* 3V crank, 2V pump, 1V alt 263.99 set MP7150* 3V crank, 1V pump, 1V alt 244.99 set

MP6090

MP6110

Crankshaft Pulleys

1969-85 Chrome Crankshaft PulleysDress-up your small block or big block engine with a chrome crankshaft pulley from Classic Industries®. These beautiful chrome aftermarket pulleys are manufactured with great attention to detail and are highly polished for a show quality shine. Applications are available for small block or big block engines.1969-85 Long Water Pump StyleT9606 single groove 6-7/8" ........ 39.99 ea T9607 double groove 6-7/8" ........ 39.99 ea T9608 triple groove 7-3/4" ........ 41.99 ea

T9606 T9607

Warning Concerning Crankshaft Pulleys Stock replacement, aftermarket stamped steel or cast iron pulleys are not designed to exceed 400 horsepower or 6000 RPM. Using reproduction pulleys on engines in excess of these limits may result in catastrophic disintegration of the pulley causing severe damage to the engine, cooling system and body parts. Classic Industries® assumes no liability for damages caused by improper usage of pulleys. Please be sure to install the pulley properly to avoid damages that could occur from improper installation or exceeding the recommended RPM limitations.

3972180

T9608MN2659

MN2660

MN2661MN2662

MN2663

MN2668

MN2664

MN2666

MN2665

En

gin

es &

Co

mp

on

en

ts

462

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

1967-81 Crankshaft Balancer HardwareReproduction hardware for mounting the crankshaft pulley and harmonic balancer.Crankshaft Pulley Bolt SetTA4023 1977-79 Olds 403 .......... 8.99 set A8700172 1967-79 Pontiac V8 ....... 9.99 set Crankshaft Pulley Reinforcement/SpacerTA4022 1977-79 Olds 403 .......... 8.99 ea A8700171 1967-72 Pontiac V8 ....... 8.99 ea Crankshaft KeysTA4025 1977-79 Olds 403 .......... 4.99 ea Harmonic Balancer Bolt and Washer SetTA4024 1977-79 Olds 403 .......... 13.99 ea A8700170 1967-79 Pontiac V8 ....... 13.99 set

A8700170

Harmonic Balancers

Harmonic Balancer HardwareGenuine GM replacement bolt (7/16"-20 x 2-1/4") and washer for a variety of small block applications. 1967-81 Small Block – Chevy G5886 bolt ........................................... 3.99 ea G9287 washer ...................................... 4.99 ea 1977-81 Crankshaft KeyG9283 Chevy sb, 3/16" x 3/4" ............. .99 ea

G5886 G9287

Harmonic Balancers

66509

Replacement Harmonic BalancerThis damper is an excellent replacement unit for the mild street engine that does not require an exact reproduction or high-performance race damper. A perfect choice for the daily driver and easy on the budget.Note: *Without high-performance.

SB 6-3/4" Diameter – Internal Balance40 Degrees Before Keyway 66509 * 350......................................... 74.99 ea 10 Degrees Before Keyway 66510 * 350......................................... 72.99 ea

SB 8" Diameter – Internal Balance10 Degrees Before Keyway 66511 * 350......................................... 69.99 ea

BB 8" Diameter – External Balance10 Degrees Before Keyway 66513 400......................................... 76.99 ea

66511

66510

1968-79 Harmonic BalancerHarmonic balancers for 1968-79 Pontiac V8 engines. Balancers are available in stock and heavy-duty versions. Heavy-duty balancers were slightly lighter than the stock version and commonly used on RA II, RA IV and HO models. A8700168 stock balancer 7.90 lb ...... 191.99 ea A8700169 heavy-duty balancer 7.65 lb 274.99 ea

A8700168

A8700169

66513

1987-02 GM Crankshaft PulleyReplace the damaged or missing original crankshaft pulley on your small block Chevy engine with a Genuine GM service part.Serpentine Belt PulleyG3567 1987-92 without turbo ......... 62.99 ea G3567 1993-95 3.4-L ...................... 62.99 ea G3878 1995-96 3.8-L with MT ....... 232.99 ea G3878 1995-97 3.8-L with AT ........ 232.99 ea G3569 1988-92 V8 with serp belt ... 44.99 ea G3887 1993-97 V8 .......................... 277.99 ea G3888 1998-02 V8 .......................... 100.99 ea

JT90140

G3567

G3569

G3888

Harmonic Balancer ToolWorks with all Ford, GM, and Chrysler engines. This heavy-duty, professional tool, equipped with roller thrust bearings, can also be used as a universal puller! Includes 7/16"-20, 5/8"-18, and 3/4"-16 adapters and various removal hardware. May also be used for steering wheel and pulley installation and removal. Maximum recommended torque is 150 ft lbs.66514 .................................................. 72.99 set

Harmonic Balancer ToolThis tool makes installing the harmonic balancer simple. Just thread the proper end into the crankshaft, and then rotate the nut which presses the bearing against the balancer.66515 .................................................. 30.99 ea

1985-97 Underdrive Pulley SetThe JET Underdrive pulley set reclaims lost horsepower and mileage by reducing the drag placed on the engine to drive the accessories such as the air conditioning, power steering and water pump. The JET pulleys slow down these accessories to allow the engine to turn with less effort without any adverse effect on the operation of AC, power steering, charging or cooling systems. Installation consists of simple bolt-on replacement of the stock pulleys. Sets include: pulleys, hardware, complete instructions and part number for new serpentine belt (most sets will require use of smaller size belt). Important: Belt is not included with set. Number and type of pulleys will vary per application.Note: *Includes 2 pulleys. JT90106* 1985-87 350 TPI ............. 174.99 set JT90108* 1985-95 3.4L ................... 144.99 set JT90107* 1988-92 350 TPI ............. 174.99 set JT90140* 1993-97 350 LT1............. 309.99 set

Harmonic Balancer Puller SetThis 13 piece set features 4 different sized attaching bolt sets to remove most common Ford harmonic balancers.Bolts to balancers, pulleys, and gears with tapped holes with the center screw on the end of the crankshaft. Tighten while tapping on the screw head to remove. A fl oating swivel prevents damage to the shaft end. TX141 .................................................. 13.99 ea

KK

En

gin

es &

Co

mp

on

en

ts

463WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov Harmonic Balancers

1967 Pontiac Harmonic BalancerThis original style two piece balancer replaces all 1967 Pontiac 5-1/2" six bolt V8 balancers. Features dual timing marks and includes a reinforcement plate, 6 Grade 8 bolts with washers and a new woodruff key. N585 1967 2 piece balancer ............................................. 205.99 ea

Harmonic Balancers

SFI-Approved Harmonic BalancerSFI specifi cation harmonic balancers are a must for high RPM engines and required on most tracks. These small block balancers have been tested for two hours at 12,000 RPM to meet or exceed all SFI specifi cations. All balancers feature laser etched degree marks for timing adjustments.Note: *Has removable weights and works with internally or externally balanced engines. 38681 6-5/8" x 1-1/2" 283/327/350ci internal balance ................. 139.99 ea 38691 * 6-3/4" x 1-3/8" 400ci internal/external balance ................. 139.99 ea

Performance Harmonic DamperFluidampr performance harmonic balancers and dampers contain no rubber or elastomers. Instead, they are fi lled with a viscous silicone based liquid that doesn’t wear out after time. The liquid absorbs virtually all torsional harmonic vibrations at almost any frequency and constantly adjusts itself for optimum performance at all RPM ranges. Fluidampr products are made from CNC-machined and balanced steel with a black zinc chromate fi nish. All dampers are SFI 18.1 certifi ed and are designed to last a lifetime without being rebuilt. Made in USA.Note: Small block dampers are not for use with 1992 and later LT1 engines. Small Block Chevy 1620101 262-350 V8 internal balance 6-1/4" o.d. 7.90 lbs 270.99 ea 1620101 409 V8 internal balance 6-1/4" o.d. 7.90 lbs 270.99 ea 1720101 262-350 V8 internal balance 7-1/4" o.d. 12.2 lbs 381.99 ea 1720111 400 V8 external balance 7-1/4" o.d. 14.0 lbs 327.99 ea

Chevrolet Harmonic DamperPro/Race high-performance harmonic dampers are direct replacements for factory cast iron units which may fracture or disintegrate at high RPM. Pro/Race dampers are ideal for the additional torque loads from belt driven superchargers. The STREET damper features special splines to enhance bonding between the elastomer, inner hub, and outer ring to prevent any outer ring radial movement, perfect for engines making between 350 to 400 horsepower. On the RACE damper, the elastomer is bonded to the steel hub and ring to endure sustained high RPM conditions. Externally balanced balancers feature weights bolted in place which may be removed for neutral or internally balanced application. Internally balanced balancers can be used on an external application simply by ordering the correct engine specifi c weights and bolting them in place.Important: Pro/Street or Pro/Sport counterweights are not interchangeable with Pro/Race counterweights.Note: *HD100016 and HD100019 are NOT drilled to accept counterweights.

Small Block DampersPRO/STREET Bonded Nodular Iron HD100001 283-350 V8 street/internal balance 6.10" x .760" .. 89.99 ea HD100002 283-350 V8 street/internal balance 6.75" x 1.32" .. 89.99 ea HD100005 283-350 V8 street/internal balance 8.00" x 1.47" .. 94.99 ea HD100006 400 V8 street/external balance 8.00" x 1.47" .. 99.99 ea PRO/RACE All Steel HD100007 283-350 V8 street/internal balance 6.61" x 1.54" .. 269.99 ea HD100010 283-350 V8 race/internal balance 6.61" x 1.54" .. 289.99 ea HD100011 400 V8 race/external balance 6.61" x 1.54" .. 329.99 ea PRO/RACE All Steel for Supercharged HD100014 283-350 V8 race/internal balance 6.61" x 1.54" .. 329.99 ea PRO/SPORT High Carbon Steel HD100016 * 283-350 V8 sport/internal balance 6.10" x 1.52" .. 169.99 ea HD100019 * 283-350 V8 sport/internal balance 6.61" x 1.52" .. 169.99 ea HD100022 283-350 V8 sport/internal balance 6.61" x 1.52" .. 189.99 ea HD100023 400 V8 sport/ external balance 6.61" x 1.52" .. 204.99 ea

Small Block CounterweightsPRO/STREET HD10028 for HD100005 & HD100006 models only .................... 11.99 ea PRO/RACE HD10029 for HD100007, HD100010 & HD100014 models only 39.99 ea PRO/SPORT HD10030 for HD100022 & HD100023 models only .................... 19.99 ea

1620101

38681 38691

1720111

HD100001 HD100012

Harmonic Balancer CoverAdd a custom high-performance look to your harmonic balancer by installing this aftermarket cover. Your choice of black, billet, or chrome. Available for 6-3/4" or 8" balancer.6-3/4" Diameter66517BKC black ........................................................................... 28.99 ea 66517CC chrome ........................................................................ 28.99 ea 8" Diameter66518BKC black ........................................................................... 28.99 ea 66518BLTC billet ........................................................................... 34.99 ea66518CC chrome ........................................................................ 28.99 ea

billet chromeblack

En

gin

es &

Co

mp

on

en

ts

464

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.govTiming Components

1985-02 Timing CoverCorrect replacement for the original front crankcase cover. Be sure to replace the cover gasket when purchasing the timing cover.G5742 1985-86 5.0-F ................... 55.99 ea G5742 1987-92 V8 ....................... 55.99 ea G12914 1998-02 5.7L, LS1 & LS6 108.99 ea

1977-80 Timing Chain and Gear SetA single row, link type timing chain and gear set. Includes: a new timing chain, camshaft gear, and crankshaft gear.TC499S 1977-80 Chevy small block ... 22.99 set

G8325

1977-02 Chevrolet Timing ChainWhen it comes to quality, you can’t beat Genuine GM parts. The timing chains offered here are Genuine GM all the way! If you’re restoring a Firebird, or simply need to replace your timing chain, make sure the replacement is manufactured with the quality your Firebird deserves. These timing chain listings are for Chevrolet engines that were factory installed in Firebird models, or replacement engines of the same designation.Chevy EnginesG8325 1980 229 V6 ..................... 73.99 ea G8325 1977-81 267, 305, 350-L ....... 73.99 ea G8325 1982 305-H, 5.0-7 ............ 73.99 ea G8325 1983 5.0-S, 305-H ............ 73.99 ea G8325 1984 305-G, 305-H .......... 73.99 ea G8325 1985-86 305-G, 305-H, 5.0-F 73.99 ea G8325 1987 305-H, 5.0-F, 5.7-8 .. 73.99 ea G8325 1988-92 5.0-E, 5.0-F, 5.7-8 ... 73.99 ea LT1 ChevyG8327 1993-97 5.7-P ........................ 57.99 ea LS1 Chevy G8327 1998-02 5.7-G ........................ 57.99 ea 1977-86 Aluminum Timing Cover

Edelbrock die-cast polished timing covers come with pan seal, Allen head bolts, gaskets, and washers. These timing covers are a great way to dress-up any Chevy engine. Complete the look with Edelbrock valve covers, and air cleaners. E4240 1977-86 Chevy small block .. 62.99 ea

1977-92 GM Timing GearOEM factory small block Chevy replacement timing gears.18 Tooth Camshaft Timing GearsG8318 1977-86 350 ........................... 52.99 ea G8318 1977-81 305 ........................... 52.99 ea G8318 1990-92 350HO, ZZ1 2nd des 52.99 ea 36 Tooth Iron Camshaft Timing GearsG8314 1977-86 350 – early link ........ 78.99 ea G8314 1977-81 305h ......................... 78.99 ea 38 Tooth Iron Camshaft Timing GearsG8317 1990-92 350HO ZZ1 2nd des 85.99 ea

G8314

Engine Timing Components 1977-95 Accu-Drive®

Camshaft Gear DrivesThe Accu-Drive® gear system transmits power from the crankshaft gear to a full fl oating main idler gear which drives the camshaft gear. A unique feature of the Edelbrock Accu-Drive® system is the ability of the main idler gear to fl oat to an optimum position between the crankshaft and camshaft gears. Important: Not for use on stock Chevy hydraulic roller lifter cam equipped engines. Accu-Drive® gears are not recommended for use above 7000 RPM or on computer controlled vehicles with knock sensors. On some late model small block engines, it will be necessary to check clearance behind the cam gear at the engine block at the 12 o’clock position. Make sure gear clears oil galley bosses on block when in the most rearward position. Grind or machine block for clearance. E7890 1977-95 Chevy small block .. 245.99 set

1977-86 SB Chevy Timing CoverThe sturdy two piece billet timing cover allows the camshaft to be serviced without disturbing the oil pan seal. The cover is machined from high grade billet aluminum and is compatible with almost all water pumps and gear drives. Includes: roller cam button, cam plate, shims, a timing pointer, hardware, and instructions. 21101 1977-86 sb timing cover ... 281.99 set

Small Block Chevy Timing Belt SystemGet more performance out of your small block with these Magnum timing belt systems! These systems absorb crankshaft harmonics. The Magnum belt drive system is ideal for street performance and budget minded race applications. Note: Minor block modifi cation may be required.

Dry Timing Belt SystemThis system is more durable and more accurate than traditional timing chains or aftermarket gear drive systems, especially at high RPM. Make quick timing modifi cations at the track without the hassle of removing a timing chain cover! Includes: main plate, gears, belt, shims, mounting hardware, and instructions. 61100 dry timing belt system ......... 563.99 set 61100B replacement timing belt ....... 69.99 set

Wet Timing Belt SystemThis system keeps the timing accurate with virtually no fl uctuation. It is also more durable than traditional timing chains or aftermarket gear drive systems, especially at high RPM. Designed to work with billet timing cover #21101 but works with most late model fl at covers. Includes: upper and lower timing gears, belt, cam timing bushings, shims, cam button, mounting hardware, and instructions. 51100 wet timing belt system ......... 409.99 set 51100B replacement timing belt ....... 85.99 ea

51100

G5742

1969-79 Pontiac Timing CoverReproduction of the timing cover which will replace the original cover for the applications below. These cast aluminum covers are what the factory designed to cover the timing chain. The water pump is also connected to the front of this unit. N538 1969-74 V8 without 307 .. 197.99 ea N538 1975 V8 w/cast mark .. 197.99 ea N538 1976-77 350P, 400, 455 .... 197.99 ea N538 1978-79 400 WC, X7 ....... 197.99 ea

Heavy-Duty Timing CoverThese Milodon timing covers feature OE quality stamping from high-quality, heavy-duty materials. All covers are precision formed including the seal recess to ensure a precise leak free fi t.Small Block Chevy65500 chrome fi nish .......................... 17.99 ea 65501 gold fi nish ............................... 21.99 ea 65502 black fi nish ............................. 25.99 ea

65501

G8318

Genuine GM!

KK

En

gin

es &

Co

mp

on

en

ts

465WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov Timing Components

Timing Cover Bolt SetARP’s timing cover bolts are available in both polished stainless steel or black oxide fi nish chromoly. You can choose between standard Hex head bolts or compact 12 point fasteners.Chevrolet EngineAR2152 black oxide Hex head ..... 12.99 set AR2151 black oxide 12 point ....... 12.99 set AR4152 stainless Hex head ..... 17.99 set AR4151 stainless 12 point ....... 17.99 set Pontiac EngineAR19152 black oxide Hex head ..... 28.99 set AR19151 black oxide 12 point ....... 29.99 set AR49152 stainless Hex head ..... 49.99 set AR49151 stainless 12 point ....... 55.99 set

1978-97 Timing Cover Bolt SetDress-up your Firebird with these one-of-a kind dress-up bolt sets. The Pontiac Arrowhead, GT, or fl ames logo is stamped directly onto the head of the bolts. They are available in decorative chrome-plated or polished stainless steel versions. What better way to make a statement than with these unique bolts? Note: Must specify logo prefi x: A – Arrowhead, B – GT logo, C – Flames.Chrome56464C 1978-87 Chevy small block 19.99 set 56400C 1993-97 LT-1 ....................... 19.99 set Stainless Steel56464S 1978-87 Chevy small block 9.99 set 56400S 1993-97 LT-1 ....................... 11.99 set

C – Flames B – GT logoA – Arrowhead

1969-79 Timing Cover Alignment SleevesReproduction of the original timing chain cover sleeves for use on 1969-79 Pontiac models. These sleeves are used to align the timing chain cover to block positioning and crankshaft seal alignment.F190 1969-79 ...................................... 8.99 pr

Timing Cover Gasket SetCorrect replacements for 305-350 small block Chevrolet applications. Sets include the timing cover seals. T4364 Chevy small block ...................... 9.99 set

Timing Components

1989-02 Camshaft Gear Dowel PinFactory correct replacement camshaft gear dowel pin. Fits 1989-02 5.0-5.7 liter engines.G8323 1989-92 5.0-E, 5.0-F, 5.7-8 .... 5.99 ea G8323 1993-97 5.7-P ......................... 5.99 ea G8323 1998-02 5.7-G ........................ 5.99 ea

1987-97 Camshaft Gear BoltFactory original replacement camshaft gear bolt.5/16"-18 x 3/4"G8324 1987 305-H, 5.0-F (export) 2.99 ea G8324 1990-92 5.0-F, 5.7-8 ................ 2.99 ea G8324 1993-97 5.7-P .......................... 2.99 ea

1977-79 Trans Am Engine Oil SlingerReproduction timing chain gear oil slinger for the 1977-79 Trans Am’s Oldsmobile 403 engine.TA4004 1977-79 Olds 403 ............ 19.99 ea

1977-79 Trans Am Timing Chain Cover BoltOldsmobile 403 engine water pump and timing chain cover bolt set. Used to hold on the timing chain cover, water pump, and timing mark bracket.TA4009 1977-79 Olds 403 .......... 29.99 set

1977-79 Trans Am Timing Mark BracketEngine crank timing mark bracket for 1977-79 Pontiac Trans Am models with 403ci Oldsmobile V8 engine. Features all correct mounting points as original.TA4010 1977-79 ................................. 16.99 ea

1967-79 Timing Cover Lock and BoltThis fastener set connects the intake manifold to the timing chain cover on 1967-79 Pontiac V8 engines. These bolts feature correct markings and black zinc fi nish on the bolt and include special lock washer with the correct silver zinc fi nish. A8700173 1967-79 ............................... 8.99 set

1967-79 Timing Chain Cover BoltsCorrect timing chain fasteners for 1967-79 Pontiac engines. Bolts feature correct markings and fi nish and include washers. Stud sets include washers and nuts. A8700174 1967-79 upper bolts ...... 13.99 set A8700175 1967-79 lower bolts ...... 13.99 set A8700176 1967-79 studs ............... 16.99 set

A8700174

AR4151

1967-77 Pontiac V8 Camshaft Thrust PlateReproduction camshaft thrust plate for 1967-77 Pontiac V8 applications. The purpose of the thrust plate is to help hold the camshaft in place as it rotates, which helps prevent camshaft “walk”. Made from cold rolled, commercial quality steel and tempered for additional strength.A8700275 1967-77 ............................... 16.99 ea

Chrome Timing TabBolt-on timing tabs in chrome to add a touch of class to your engine. Will economically replace damaged or missing original timing tabs. Simply bolts on using the factory timing cover bolts. A variety of applications are available for 6, 7, or 8" balancers. Your choice of tab with or without pointer.With PointerT9178 small block with 7" ............... 2.99 ea T9179 small block with 8" ............... 2.99 ea Without PointerT4960 small block with 6"-7" .......... 2.99 ea D141202 small block with 8" ............... 9.99 ea

T4960T9179

1977-82 Bolt-on Timing TabBolt-on service part to economically replace damaged or missing original timing tabs. Simply bolts on using the factory timing cover bolts.Note: *Except high-performance engine.Small Block1256653 1977-80 with high-perf ... 12.99 ea 1256654* 1977-82 350.................... 12.99 ea

1256653

LS Engine 2 Piece Timing Chain CoverThis 2 piece aluminum timing chain cover with fi t any LS1, LS2, LS3, LS6 engine. This has the sensor hole where applicable. With two pieces you can change cams without taking off the harmonic balancer. Includes mounting hardware. You can reuse the cover gasket. Sold as a set. Available in polished or black.Important: Set does not include the crankshaft seal. Use G13214 LS front crankshaft seal – all LS engines.Note: Covers will not fi t the LS7 engines.

2 Piece Timing Chain CoverWithout Sensor HoleA9700127 LS1, LS6 polished ............. 34.99 set A9700128 LS1, LS6 black .................. 39.99 set

2 Piece Timing Chain CoverWith Sensor HoleA9700125 LS2, LS3 polished ............. 36.99 set A9700126 LS2, LS3 black .................. 36.99 set

Front Crankshaft SealACDelco GM original equipment front crankshaft seals are high-quality seals, which seal in lubricant and keep dirt and water out. Made from rubber or plastic composite materials, they conform to the sealing surface to provide leak free operation.G13214 all LS engines ....................... 19.99 ea

A9700127 A9700126

En

gin

es &

Co

mp

on

en

ts

466

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

1969 Firebird Ram Air SystemCorrect reproduction Ram Air induction system for 1969 Firebird models. This 18 piece set includes the major components required to install a Ram Air system on models with Firebird 400 hood.Note: Will not fi t Trans Am models.

A8700138 1969 Ram Air system .... 1964.99 set

1969-75 Ram Air Pan Actuator AssemblyReproduction of the Ram Air actuator assemblies for use on models with Ram Air. These actuators rivet to the underside of the Ram Air pan and vacuum lines attach close to eliminate outside air to the carburetor.AssemblyF12349 1969 LH ........................... 112.99 ea F12350 1969 RH .......................... 112.99 ea Diaphragm and BracketF12325 1969 T/A with Ram Air ... 23.99 ea F12325 1970-75 formula air cleaners 23.99 ea

F12349

1967-69 Ram Air Hood PanReproduction of the Ram Air hood pan for 1967-69 Firebird models. This pan is manufactured from E-coated die-stamped steel or fi berglass. This pan mounts to the hood. For models with Ram Air.SteelF12336 1967-68 .......................... 279.99 ea F12337 1969 upper ................ 493.99 ea F12345 1969 lower ................ 349.99 ea

1967-69 Hood Pan SealCorrect reproduction seals which seal the Ram Air system. For use on 1967-69 models with Ram Air.Upper RubberF12338 1967-68 ................................. 66.99 ea F12348 1969 ...................................... 79.99 ea Lower FoamF12339 1967-68 ................................. 44.99 ea F12340 1969 ...................................... 66.99 ea

Ram Air Parts

1967-68 Ram Air Carburetor PanReplacement of the Ram Air Carburetor Pan. This pan is manufactured from E-coated die stamped steel and was used on 1967-68 models with Ram Air. This pan mounts on top of the carburetor.SteelF12344 base only ............................ 275.99 ea

F12348

• Upper Ram Air Pan• Pan Heat Actuators• Ram Air Flapper Door• Upper Cable• Connector Block• Connector Bracket• Lower Cable and Knob• Lower Cable Bracket

• Cable Bracket Decal• Die-cast Hood Scoops• Foam Pan Seals• Lower Air Pan• Spark Arrestor Screen• Filter Retaining Ring• Air Filter• Pan Stud Kit

1969 Trans Am Ram Air SystemInstall a Ram Air system on your 1969 Trans Am! This was a rare option for Trans Am and parts were almost impossible to fi nd, until now. This kit includes the major components required to install the rare Trans Am Ram Air system on your vehicle.

A8700139 1969 TA Ram Air System 1424.99 ea

• Upper Ram Air Pan• Pan Heat Actuators• Lower Carburetor Pan• Upper Foam Seal Upper Carburetor Pan Foam Seal

• Upper Pan Filter Retaining Ring• Air Filter• Spark Arrestor Screen• Pan Stud Kit

1967-68 Firebird Ram Air SystemCorrect reproduction of the factory Ram Air induction system. This six piece set includes the major components needed to install a Ram Air system on 1967-68 models with a Ram Air Firebird 400 hood.

A8700137 1967-68 Ram Air system .... 856.99 set

• Upper Hood Pan• Lower Carburetor Pan• Die-cast Ram Air Scoops

• Upper Foam Seal• Lower Foam Seal• Air Cleaner Lid

A8700137

F12336F12345

1970-81 Shaker Flap SealReproduction shaker fl ap seal for 1970-81 models. This rubber item seals the fl ap on the shaker hood scoop. Designed to replace the original exactly.E201 1970-81 scoop edge .............. 6.99 ea

1977-81 T/A Shaker Hood Scoop/BaseReproduction hood scoop and base for 1977-81 Pontiac Trans Am models with the optional Shaker intake. The scoop is manufactured from fi berglass, as original, while the base is manufactured from steel. Will work with 301, 400, and 403 Pontiac engines. Bases include attaching ring. Scoop to hood seal sold separately.F10191 1977-81 scoop ..................... 184.99 ea F10192 1977-81 301 base ................. 92.99 ea F10193 1977-81 400 base ................. 92.99 ea F10194 1977-81 403 base ................. 92.99 ea F10195 1977-81 scoop & 301 base .. 269.99 set F10196 1977-81 scoop & 400 base .. 269.99 set F10197 1977-81 scoop & 403 base .. 269.99 set

F10191

F10194

F10197

1970-76 T/A Shaker Hood ScoopReproduction hood scoop assembly for 1970-76 Pontiac Trans Am models with the optional Shaker intake. Manufactured from fi berglass as original and includes the fl apper and all necessary components for a functional Shaker system. F10198 1970-76 .................................. 305.99 ea

F12325

underside

1977-81 T/A Shaker Scoop Drain HoseReproduction hood scoop drain hose for 1977-81 Pontiac Trans Am models with the optional Shaker hood intake. Manufactured with correct molded bends as original, this hose runs from the base of the scoop down in front of the water pump to drain moisture. Hose clamp included. 15241 1977-81 ................................... 14.99 ea

Shaker Hood/Ram Air Parts

KK

En

gin

es &

Co

mp

on

en

ts

467WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

1967-69 Ram Air Pan Air FilterReplacement air fi lter for use on 1967-69 models with Ram Air. This is the correct size air fi lter that fi ts in the Ram Air pan.F12341 1967-69 lower .................. 13.99 ea F12342 1967-69 upper .................. 23.99 ea

1969 Trans Am Ram Air Hood TubesReproduction of the Ram Air hood tubes for use on 1969 Trans Am models with Ram Air. These tubes mount on the underside of the hood and go from the Ram Air scoops to the Ram Air pan which direct air into the lower pan.Note: *Does not fi t reproduction hoods.F12343 1969 Ram Air hood tubes 166.99 pr EB6540* 1969 RH heavy-duty ....... 197.99 ea

F12352

F12343

1969 Ram Air CableReproduction of the upper Ram Air cable for use on 1969 models with 400 hood. The upper cable goes from the fl apper door to the Ram Air pans. The lower cable goes from the Ram Air pan to the inside of the car and connects to to the cable support bracket and features a chrome knob.F12351 1969 upper ....................... 36.99 ea F12352 1969 lower ....................... 41.99 ea

1969 Cable Connector BlockReplace your missing or damaged connector block with this quality reproduction. This block connects the upper and lower Ram Air cables together. Works on 400 hoods with Ram Air I.F12353 1969 connector block ....... 15.99 ea

1969 Cable Connector BracketThis bracket connects the upper and lower cables together in the Ram Air pan. Works on 400 hoods with Ram Air I.F12354 1969 ....................................... 15.99 ea

1976-79 Shaker Scoop Retainer RingRing that secures the shaker scoop to the air cleaner assembly. This reproduction ring will replace the original exactly. For use on all 1976-79 models with shaker hoods. 10004184 1976-79 ............................. 54.99 ea

1977-81 Shaker Scoop to Hood SealCorrect reproduction rubber seal which seals the scoop to the underside of the hood. Includes attaching clips.10012875 1977-81 scoop to hood .... 52.99 ea

1969 Inner Cable Support BracketThis bracket mounts to the lower dash and positions the cable in location to actuate Ram Air. Works on 400 hoods with Ram Air I.F12355 1969 support bracket ........ 74.99 ea

1969 Ram Air DecalThis decal is located under the dash and mounts to the inner cable support bracket.F12356 1969 Ram Air decal ............ 4.99 ea

1969 Upper Air Filter Retaining RingReproduction of the upper air fi lter retaining ring for use on 1969 models with Ram Air. Most people don’t realize the air fi lter mounts up in the hood pan. This is the retaining ring that screws the upper pan to hold the air fi lter up to the pan.F12346 1969 ....................................... 42.99 ea

Shaker Hood Parts

F12341

F12342

1970-75 Ram Air Rubber BootsThese are correct reproductions of the rubber boots that go from the air cleaner to the hood on all 1970-75 Formula Firebird models with Ram Air. The boots were retained to the underside of the hood with a specialized retainer plate. One pair of each required per vehicle.FL120 1970-75 rubber boots ......... 64.99 pr F70765 1970-75 retainer ................. 29.99 ea

1969 Spark Arrestor ScreenCorrect fl ame spark arrestor for 1969 Firebird and Trans Am models equipped with Ram Air III or Ram Air IV. Sits on top of the carburetor to keep debris out of the carb when the hood is up, and help prevent an underhood fi re in the event of a backfi re.F12394 1969....................................... 84.99 ea

1970-72 Shaker Scoop Throttle SolenoidCorrect reproduction of the original shaker scoop solenoid assembly which allows the hood valve assembly to open and shut when the accelerator is depressed. 153474 1970-72 .................................... 44.99 ea

FL120 F70765

1970-72 Trans Am Throttle SwitchReproduction throttle switch assembly for 1970-72 Trans Am models. The throttle switch assembly mounts on the carburetor. It signals the fl apper door on the Trans Am scoop to open and close.15520G 1970-72 switch only .......... 19.99 ea K7970 1970-72 switch w/brackets 104.99 ea A9700101 1970-72 switch retainer ..... 4.99 ea

K7970

Shaker Hood/Ram Air Parts

En

gin

es &

Co

mp

on

en

ts

468

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Replacement Air Cleaners

1970-75 Formula Dual Snorkel Air CleanerThis quality reproduction dual snorkel air cleaner is just what you need to bring your 1970-75 Formula engine compartment back to its original appearance. This air cleaner housing is designed to function with all 1970-75 Formula dual scoop hoods. F70752 1970-75 Formula ............. 460.99 ea CB1007 1970-75 rubber seal ......... 14.99 ea

Air Cleaners

1970 Ram Air III Air CleanerReproduction single snorkel air cleaner for 1970 Trans Am with Ram Air III 400 engine. A one year only air cleaner setup to accept the functional hood scoop. Features correct domed air cleaner lid. Air fi lter element is not included.F12378 1970 Ram Air III .............. 317.99 ea

1970-73 Ram Air III Air CleanerReproduction dual snorkel air cleaner with one heat stove diaphragm valve for 1970-73 Trans Am with Ram Air III, HO 400 or 455 engine. Features correct domed air cleaner lid. Air fi lter element is not included.F12379 1970-73 Ram Air III ....... 317.99 eaF12379 1970-73 HO 400/455 ...... 317.99 ea

1967-74 Dual Snorkel Air Cleaner LidA reproduction of the hard to fi nd 17" 4 barrel dual snorkel air cleaner lid in chrome or black fi nish. Each lid is manufactured using the correct confi guration for a show quality appearance! These lids are sure to please even the most discriminating restorer or show judge! This lid also includes a correct lid to base rubber seal which is preattached to the lid. KW462 1967-74 black .................... 48.99 ea KW461 1967-74 chrome ................. 62.99 ea

KW462

F70752

KW461

1970-76 Shaker Air Cleaner Lid Reproduction “Shaker” domed air cleaner lid for 1970-76 Pontiac Trans Am models. Features correct dome. Filter element not included and sold separately.F12386 1970-76 14" diameter ........ 43.99 ea

Chrome Air CleanerReplacement air cleaner including chrome lid. This 9" air cleaner fi ts all with 5-1/8" necks. For 4-7/32" necks must use 66315 adapter. 66815 9" diameter .............................. 17.99 ea 66315 4-7/32" neck adapter ............... 6.99 ea

66802

Low Profi le Chrome Air CleanerAftermarket replacement air cleaner designed for anyone who wants a low profi le appearance. Includes a triple chrome-plated lid. Open element style air cleaner. 66804 14" dia., fi ts 5-1/8" neck ........... 34.99 ea

Deluxe Chrome Tri-Star Air CleanerEach air cleaner is open element style and includes a Tri-Star wing nut on top. Available in 4 separate sizes. Includes quality chrome-plating for an authentic appearance and long-lasting dependability. Air Cleaner for 5-1/8" and 4-7/32" Necks66801 14" dia., with Tri-star nut........ 32.99 ea 66802 10" dia., with Tri-star nut........ 19.99 ea 66803 6-3/8" dia., with Tri-star nut ... 14.99 ea Air Cleaner for 2", 2-5/16" and 2-5/8" Necks66816 4" dia., with Tri-star nut.......... 14.99 ea ElementT2110 element for 66801 ................... 9.99 ea

1967-81 Open Element Air CleanerReplacement 6" tall air cleaner assembly which includes the base, element, and chrome-plated lid. Excellent replacement for open element type air cleaner. Includes knockout provided for smog tube. Great inexpensive replacement with super looks! Although this air cleaner is not original, it gives a custom look many enthusiasts desire. Note: Fits 5-1/8" neck. This air cleaner assembly is not for use with Ram Air.T2286 1967-81 14" diameter .......... 46.99 ea T2287 1967-81 14" x 6" element .... 18.99 ea

T2286

1967 Chrome Louvered Air CleanerThis style of air cleaner was part of the chrome dress option for 1967 Firebird 400 models. These assemblies include a low profi le chrome louvered lid, a pancake style fi lter element, and a baseplate. Available for both Quadrajet and AFB carburetor models. Lids and baseplates are also available separately.Note: *Will not work with Edelbrock carburetors.Assemblies PY4201 * 1967 AFB assembly .......... 183.99 ea PY4202 1967 Quadrajet assembly .. 213.99 ea Individual Components PY4213 1967 louvered lid ............... 139.99 ea PY4214 * 1967 AFB baseplate .......... 59.99 ea PY4215 1967 Quadrajet baseplate .. 59.99 ea

PY4202

Retro Style Air CleanerThis custom air cleaner assembly was inspired by the Cadillac and Oldsmobile oil bath air cleaners of the early 1950’s. Manufactured in heavy gauge steel and powder coated in a semi-gloss black fi nish, these custom air cleaners fi t most carburetors and throttle bodies with a 5-1/8" mounting fl ange. The lower rear section of the air cleaner is clearanced for HEI distributors. Available in a full scale 18-1/4" wide version that uses a 14" x 4" fi lter element and a 7/8 scale 15-21/32" wide version that uses a 12" x 3" fi lter element. Both sizes include a fi lter element, chrome rocket shaped wing nut, and an air cleaner decal.CL8510 7/8 scale 15-21/32" wide .... 149.99 ea CL8500 full scale 18-1/4" wide ....... 149.99 ea

CL8500 – front view

detail

CL8500 – 3/4 view

d t il

KK

En

gin

es &

Co

mp

on

en

ts

469WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Custom Air Cleaners & Scoops

Custom Scoops

Super Light 14" Air CleanerSave critical front end pounds! In a black or clear anodized fi nish, plus a 3" tall genuine AC fi lter, a color matched, super deep aluminum base for maximum hood clearance when using optional, extra tall air fi lter elements. Supplied with necessary mounting hardware and center nuts. 141690 black ................... 74.99 ea 141691 clear anodized ..... 74.99 ea

E41173

Classic Series Air CleanerAvailable in either classic polished aluminum or durable black powder coated fi nish and includes a 3" medical grade, pre-oiled cotton gauze element for excellent filtration. These air cleaners work with all popular 5-1/8" necks, for all carburetors or throttle bodies. Overall height is 3.9".E4117 polished fi nished 253.99 ea E41173 black fi nish ........ 180.99 ea

Full Sized Street ScoopThese full sized aluminum street scoops add an aggressive performance look to any custom street or show car engine. These finned and polished scoops measure 20" long by 5" tall and are available for both dual or single quad applications, fi tting carburetors with a 5-1/8" neck. Scoops include all necessary mounting hardware and 6-3/8" x 2-1/2" paper element air fi lters. 52351 single quad ..... 154.99 ea 52331 dual quad ........ 164.99 ea

52331

Mini Street ScoopGive any engine the look of sheer horsepower with these beautiful aluminum mini street scoops. Designed for single quad carburetors with a 5-1/8" neck. These aluminum scoops measure 13-1/2" long and 4-1/2" tall, and are available with fi nned or smooth polished fi nishes. Ready to bolt on with all necessary hardware and a 6-3/8" x 2-1/2" paper element air fi lter. 52451 smooth scoop ... 135.99 ea 52461 fi nned scoop ..... 99.99 ea

52451

52461

Aluminum Street ScoopsThese aluminum street scoops add an old-school performance look to almost any engine, especially if it has a tunnel ram or dual carburetors. Each 20" scoop is made from polished cast aluminum with three fully functional reversible round butterfl ies. Designed for carburetors with a 5-1/8" neck and includes both dual and single carburetor mounting plates, 6-3/8" x 2-1/2" paper element air fi lters, hardware, and instructions. 53391 smooth ............ 222.99 set 52391 ribbed .............. 219.99 set

Streamline Series Air CleanerThese billet aluminum air cleaners are machined for style, featuring a mirror polished billet strip on top with integrated wing nut. Designed to fi t standard four barrel carburetors, each air cleaner includes stainless steel hardware and detailed instructions. Choose from three designs, available in your choice of satin black powder coated or bead blasted and ready for paint. Made in USA.Note: Not for use with Dominator carburetors.Ready to Finish 158241 14" air cleaner ................................................................. 254.99 ea 154241 large oval air cleaner ...................................................... 219.99 ea 153241 small oval air cleaner ...................................................... 182.99 ea Black 158240 14" round air cleaner ...................................................... 254.99 ea 154240 large oval air cleaner ...................................................... 199.99 ea 153240 small oval air cleaner ...................................................... 182.99 ea

158240158241 154240

Ribbed Billet Air CleanerThese precision machined air cleaners are a product of progression and styling. Manufactured from machined billet aluminum with a mirror polished fi nish, each air cleaner includes a K&N fi lter, stainless steel mounting hardware and detailed instructions. Available in a 14" round version or a 17-1/2" x 9-3/8" dual quad confi guration with adjustable base plate to allow for variations in carburetor spacing. Made in USA.Note: Not for use with Dominator carburetors. 14" Round 215840 14" air cleaner .. 706.99 ea 17-1/2" x 9-3/8" Dual Quad 215650 oval air cleaner 294.99 ea

215650

215840

Signature Series Air CleanerTop off your engine with a good looking Pro-Flo air cleaner. The Edelbrock signature and styling coordinate beautifully with Edelbrock Signature Series valve covers. These air cleaners are stamped from 18 gauge steel and triple chrome-plated for a high-quality fi nish and good looks. They’ll work with all popular 5-1/8" diameter carburetor necks. Important: Use E1121 with all Edelbrock square bore carburetors and Q-jets.Round 14" Diameter with 3" ElementE1207 chrome with logo ............................................................. 35.99 ea E1121 chrome with logo, low profi le.......................................... 34.99 ea E1223 black with logo, low profi le ............................................. 37.99 ea Round 10" Diameter with 2" ElementE1208 chrome with logo ............................................................. 26.99 ea E1203 black powder coated with logo ........................................ 28.99 ea Round 6" Diameter with 2" ElementE1209 chrome with logo ............................................................. 32.99 ea Triangular with 2-1/2" Washable ElementE1222 chrome with logo ............................................................. 117.99 ea

E1223E1207

141690

Vintage Series Air Cleaner Vintage Series air cleaners are 14" in diameter and are available in both 3" and 4" heights. They can also be had with either paper (white) or premium reusable cotton gauze (red) fi lter elements. All air cleaners include color matched bases with knock out provisions for a fresh air adapter. The carburetor gasket and all mounting hardware necessary for installation is also included. Fits Holley 4150 and 4160 with 5-1/8" diameter neck. Lid is made from die-cast aluminum, with a stamped steel base.Paper Filter Elements 14" x 3"H120150 polished fi nish .............................................................. 168.99 ea H120152 black fi nish ................................................................... 133.99 ea H120158 natural fi nish ................................................................. 128.99 ea Paper Filter Elements 14" x 4"H120154 polished fi nish .............................................................. 174.99 ea H120156 black fi nish ................................................................... 138.99 ea H120159 natural fi nish ................................................................. 133.99 ea Premium Filter Reusable Element 14" x 3"H120151 polished fi nish .............................................................. 174.99 ea H120153 black fi nish ................................................................... 138.99 ea H120160 natural fi nish ................................................................. 133.99 ea Premium Filter Reusable Element 14" x 4"H120155 polished fi nish .............................................................. 179.99 ea H120157 black fi nish ................................................................... 145.99 ea H120161 natural fi nish ................................................................. 138.99 ea

H120156 H120155 H120150

E1222

52391141691

E4117

En

gin

es &

Co

mp

on

en

ts

470

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

PERFORMANCE FILTERS

Air Filter Sealing GreaseK&N Air Filter Sealing Grease seals the air cleaner assembly, eliminating the possibility of dirt, dust and other particles from entering your carburetor from between the air fi lter element and air cleaner assembly. This is especially important if you will be operating your vehicle off-road or in extremely dusty conditions such as construction sites, etc. K&N Air Filter Sealing Grease resists heat and will not melt or run off. 990704 6 ounce tube ............................. 9.99 ea

Performance Filters

11" Stainless Steel Air CleanerThis air cleaner is perfect when high-performance is desired but space is at a premium. 5-1/8" fl ange fi ts all popular 4 barrel carburetors. Your choice of 4 element heights are offered to fi t a wide variety of applications. 3/4" vent kit is included. Total height listed below is the minimum clearance needed above the carburetor fl ange. Top is made of long-lasting polished stainless steel while bottom is an attractive chrome fi nish. 11" Diameter with Vent Kit601170 2-1/8" element, 3.12" total ht 135.99 ea 601180 3-1/2" element, 4.75" total ht 111.99 ea 601200 5" element, 6.00" total ht ....... 123.99 ea 601210 6" element 7.00" total ht ........ 122.99 ea

14" Triangular Chrome Air CleanerBreathe a little life into your engine compartment! This triangular air cleaner will set your underhood area apart from the norm. The 5-1/8" fl ange fi ts all popular 4 barrel carburetors. Element height is 3" while 3.62" is the minimum clearance needed above the carburetor fl ange.14" Triangular with Vent Kit601470 3" element, 3.62" total ht ...... 131.99 ea

14" Low Profi le Chrome Air CleanerThis air cleaner provides a low profi le fi t by dropping the fi lter 7/8" or 1-1/4" below the carburetor fl ange. 5-1/8" fl ange fi ts all popular 4 barrel carburetors. Your choice of 4 element heights are offered to fi t a wide variety of applications. Note that the 7/8" drop will fi t carburetors with electric choke mechanisms. Optional vent kit, item #851190 is available and sold separately. Total height listed below is the minimum clearance needed above the carburetor fl ange. Important: *Items marked with asterisk will not fi t Edelbrock carbs with electric choke.7/8" Drop without Vent Kit601430 3" element, 3.12" total ht ..... 116.99 ea 601440 4" element, 4.12" total ht ..... 119.99 ea 601450 5" element, 5.12" total ht ..... 127.99 ea 601460 6" element, 6.12" total ht ..... 129.99 ea 1-1/4" Drop without Vent Kit601280 3" element, 2.75" total ht ..... 95.99 ea 601290 4" element, 3.75" total ht ..... 131.99 ea 601300* 5" element, 4.75" total ht ..... 125.99 ea 601310* 6" element, 5.75" total ht ..... 123.99 ea

Air Filter Oil & Clean/Degreaser Set!K&N Air Filter Oil and Cleaner/Degreaser is the only oil and cleaner/degreaser specially formulated to work in combination with the cotton fabric in the K&N fi lter. The use of any other could void the fi lter’s warranty and potentially harm the air fi lter’s cotton material. The cleaner/degreaser works to dissolve the dirt buildup and old oil fi lter oil and can be washed away with water. It is environmentally friendly, and when used as directed, is safe on paint, chrome, cast aluminum, plastic, rubber and vinyl. Each set includes oil, cleaner/degreaser, and service decal. Your choice of 6-1/2 oz. aerosol spray or 8 oz. squeeze oil bottle is offered.995000 kit w/6-1/2 oz. aerosol oil .... 14.99 set 995050 kit with 8 oz. squeeze oil ... 14.99 set

14" Raised Profi le Chrome Air CleanerThis air cleaner raises the element 9/16" above the carburetor fl ange. 5-1/8" fl ange fi ts all popular 4 barrel carburetors. Your choice of 4 element heights are offered to fi t a wide variety of applications. Will clear HEI distributors. Vent kit is included. Total height listed below is the minimum clearance needed above the carburetor fl ange. 9/16" Raised Profi le with Vent Kit601263 2-1/4" element, 3.87" total ht 119.99 ea 601264 3" element, 4.62" total ht ...... 104.99 ea 601260 4" element, 5.62" total ht ...... 134.99 ea 601270 5" element, 6.62" total ht ...... 145.99 ea

Air Filter Element for OEM Air CleanerE1220 1968 250 1 barrel ............... 64.99 ea E1220 1968 250 4 barrel ............... 64.99 ea E1220 1968-70 350 2 barrel ............... 64.99 ea E1650 1968 350 4 barrel ............... 64.99 ea E1220 1968 400 2 barrel ............... 64.99 ea E1650 1968 400 4 barrel ............... 64.99 ea E1070 1969-76 250 1 barrel ............... 61.99 ea E1650 1969 350 4 bbl w/o Ram Air 64.99 ea E1650 1969-70 400 4 bbl w/o Ram Air 64.99 ea E1590 1970 400 4 bbl w/Ram Air ... 71.99 ea E1650 1971 455 4 barrel ............... 64.99 ea E1650 1971 400 4 barrel ............... 64.99 ea E1650 1971-76 350 2 barrel ............... 64.99 ea E1590 1972-79 400 4 bbl w/Ram Air ... 71.99 ea E1650 1972-79 400 4 bbl w/o Ram Air 64.99 ea E1650 1972-76 455 4 bbl w/o Ram Air 64.99 ea E1590 1972-76 455 4 bbl w/Ram Air ... 71.99 ea E1650 1972-74 400 2 barrel ............... 64.99 ea E1650 1975-77 350 4 barrel ............... 64.99 ea E1070 1977-78 231 2 barrel ............... 61.99 ea E1650 1977-78 403 4 bbl w/o Ram Air 64.99 ea E1590 1977-78 403 4 bbl w/Ram Air ... 71.99 ea E1450 1977 301 2 barrel ............... 58.99 ea E1450 1978-79 305 2 barrel ............... 58.99 ea E1500 1978-79 350 4 barrel ............... 55.99 ea E1450 1973 301 2 barrel ............... 58.99 ea E1590 1979 301 4 bbl w/Ram Air ... 71.99 ea E1450 1979-80 301 4 bbl w/o Ram Air 58.99 ea E1590 1979 403 4 bbl w/Trans Am 71.99 ea E1650 1979 403 4 bbl w/o Trans Am 64.99 ea E1450 1979-80 231 2 barrel ............... 58.99 ea E1450 1980 265 2 barrel ............... 58.99 ea E1450 1980 301 4 bbl with Turbo ... 58.99 ea E1500 1980 301 4 bbl w/Ram Air ... 55.99 ea E1410 1980 305 4 bbl w/Trans Am 79.99 ea E1500 1980 305 4 bbl w/o Trans Am 55.99 ea E1450 1981 3.8L 2 bbl w/Trans Am 58.99 ea E1410 1981 4.3L 2 barrel .............. 79.99 ea E1430 1981 4.9L 4 bbl with Turbo .. 67.99 ea E1410 1981 4.9L 4 bbl w/o Turbo ... 79.99 ea E1500 1981 5.0L 4 barrel .............. 55.99 ea E1015 1982-83 2.5L TBI .................... 54.99 ea E1117 1982-83 5.0L TBI 2 required ..... 59.99 ea E1030 1982-84 2.8L 2 barrel .............. 61.99 ea E1450 1982-87 5.0L 4 barrel .............. 58.99 ea E1015 1984-86 2.5L FI ....................... 54.99 ea E0890 1985-86 5.0L FI ....................... 51.99 ea E0890 1985-86 2.8L FI ....................... 51.99 ea E0890 1987 2.8L MFI ................... 51.99 ea E0890 1987-92 5.0L TPI .................... 51.99 ea E0890 1987-89 5.7L TPI .................... 51.99 ea E1450 1988 5.0L FI ....................... 58.99 ea E0890 1988-89 2.8L FI ....................... 51.99 ea E0870 1989 3.8L FI with Turbo ...... 49.99 ea E1450 1989-90 5.0L EFI .................... 58.99 ea E0890 1990-92 3.1L FI ....................... 51.99 ea E0890 1990-92 5.7L FI ....................... 51.99 ea E1450 1991-92 5.0L TBI .................... 58.99 ea 332042 1993-95 3.4L FI ....................... 49.99 ea 332042 1993-97 5.7L FI w/o Ram Air .... 49.99 ea 332042 1995-97 3.8L FI ....................... 49.99 ea 332035 1996-97 5.7L FI with Ram Air ... 99.99 ea 332118 1998-02 3.8L FI ....................... 74.99 ea 332118 1998-02 5.7L FI ....................... 74.99 ea

601290

601310

601260

601180

KK

En

gin

es &

Co

mp

on

en

ts

471WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

PRECHARGERS Filter WrapThe K&N PRECHARGERS is a specially designed fi lter wrap made to extend the length of time between cleanings. A great idea when operating off-road or in very dusty conditions. They are made from a durable polyester material containing uniform micron openings. The PRECHARGERS will stop small particles, yet add little restriction to the airfl ow of the fi lter. The PRECHARGERS is designed to be run dry and can be cleaned with K&N Filter Cleaner. Each comes silk screened with the K&N logo. Choose from black, blue, red or yellow, please specify color when ordering.14" Diameter XStream Top PRECHARGERS221430 with 3" element ...................... 44.99 ea 221440 with 4" element ...................... 45.99 ea 221450 with 5" element ...................... 47.99 ea

PERFORMANCE FILTERS

Carburetor CoverDamage to pistons, rings and other components can be caused by accidently dropping something into your carb while the air cleaner assembly is off. The K&N carburetor cover is used on 5-1/8" carburetors eliminating the risk of dropping bolts, nuts, screws, or other items down the throat and into the intake manifold. Also works well in keeping dirt, dust and other elements out of your carb during times you must store your engine or vehicle with the air cleaner assembly removed. Choose from black, red, or orange.5-1/8" Carburetor Cover858913C specify black, red or orange 38.99 ea

PRECHARGER Filter WrapThe K&N PRECHARGER is a specially designed fi lter wrap made to extend the length of time between cleanings. A great idea when operating off-road or in very dusty conditions. They are made from a durable polyester material containing uniform micron openings. The PRECHARGER will stop small particles, yet add little restriction to the airfl ow of the fi lter. The PRECHARGER is designed to be run dry and can be cleaned with K&N Filter Cleaner. Double stitched elastic openings keep the PRECHARGER securely in place. Each comes silk screened with the K&N logo. Choose from black, blue, red or yellow. Important: Please specify black, blue, red or yellow when you place your order.

11" Diameter PRECHARGERE1250P 3-1/2" height ........................ 24.99 ea E3680P 5" height ............................... 24.99 ea E3690P 6" height ............................... 25.99 ea 14" Diameter PRECHARGERE1650P 3" height .............................. 24.99 ea E3750P 4" height ............................... 24.99 ea E3760P 5" height ............................... 25.99 ea E3770P 6" height ............................... 25.99 ea

Please specify color when placing your order

Air Cleaner AssemblyA K&N air fi lter element can be washed up to 25 times before it is considered no longer serviceable. Even though the fi lter may not show outward signs of deterioration, it should be replaced after 25 washings. Excessive washings will deplete the tiny cotton hairs that crisscross the openings. The resulting damage will allow tiny dust particles to pass through. The elements listed below are designed for use with our K&N chrome and stainless steel air cleaner assemblies.14" Round ElementsE1650 3" height, 14" diameter .......... 64.99 ea E3750 4" height, 14" diameter .......... 66.99 ea E3760 5" height, 14" diameter .......... 75.99 ea E3770 6" height, 14" diameter .......... 91.99 ea 11" Round ElementsKE1200 2-1/8" height, 11" diameter ... 74.99 ea E1250 3-1/2" height, 11" diameter ... 74.99 ea E3680 5" height, 11" diameter .......... 75.99 ea E3690 6" height, 11" diameter .......... 79.99 ea 14" Triangular ElementE3737 3" height, 14" triangular ........ 75.99 ea

XStream Air Flow Top and AssemblyIf your engine still has its stock style fi lter element and air cleaner assembly, it most likely is not realizing its full horsepower potential. Restrictive elements combined with the turbulence inside a stock fi lter housing tend to choke off critical airfl ow. Put an end to this dilemma with K&N’s XSTREAM air fl ow top or the XSTREAM air fl ow assembly and feed your engine all the air it can use. The result will be maximum horsepower! Choose from the complete assembly or just add the top to your existing round fi lter. Either way, you’ll enjoy the benefi ts of a high fl ow element that cuts turbulence. Cleanable and reusable just like our other fi lters. Total height listed below is the minimum clearance needed above the carburetor fl ange.XSTREAM Air Flow Top (Top Only)661401 14" black rim ....................... 72.99 ea 661401XP 14" polished rim .................. 81.99 ea 661401XB 14" blue rim ........................ 89.99 ea 661401XR 14" red rim .......................... 89.99 ea XSTREAM Air Flow Assembly 7/8" Drop (for 5-1/8" Neck Flange)663050 3" element (3-1/8" height)... 172.99 ea XSTREAM Air Flow Assembly 1-1/4" Drop (for 5-1/8" Neck Flange)663060 4" element (3-3/4" height)... 141.99 ea 663070 5" element (4-3/4" height)... 187.99 ea XSTREAM Air Flow Assembly Raised 9/16" Base (for 5-1/8" Neck Flange)663010 3" element (4-5/8" height)... 141.99 ea 663020 4" element (5-7/8" height)... 187.99 ea 663030 5" element (6-7/8" height)... 204.99 ea

663060 –complete assembly

polished rim blue rim red rim

blue red yellowblack

Four Colors to Choose From!

1993-02 Fuel Injection SetIn the K&N tradition of engineering power, the K&N Fuel Injection Performance set (FIPK) dramatically reduces intake restrictions as it smooths and straightens air fl ow. This allows your vehicle’s engine to inhale a larger volume of air then in the OEM air fi lter assembly. More air means more usable power and torque throughout the engines RPM range, with even greater power gains in turbo charged and supercharged engines. Fuel Injection Performance kits are available for many popular performance vehicles, and are designed to replace the original air fi lter case without jeopardizing important emission standards. Exempted by the California Air Resource Board, fuel injection performance sets make it possible to experience the rapid acceleration of advanced air fl ow while meeting the tough emissions standards of C.A.R.B. These fuel injection performance sets are washable, reusable and backed by K&N’s unique 10-year Million Mile Limited Warranty.5730101 1993-95 3.4L F/I .................. 267.99 set 5730101 1993-97 5.7L w/oRA or TC 267.99 set 5730222 1998-02 5.7L w/o Ram Air .. 417.99 set

Performance Filters

blue red yellowblack

PRECHARGERS

14" Replacement Air Cleaner ElementReplacement air fi lters for air cleaners that require a 14" diameter element.C676 14" x 3" element ....................... 9.99 ea T2287 14" x 5" element ....................... 18.99 ea

C676

T2287

En

gin

es &

Co

mp

on

en

ts

472

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.govAir Cleaners

Low Profi le Oval Inlet Air CleanerLooking to add a high tech look to your engine compartment? Check out these Spectre ProFab low profi le oval inlet polished air cleaners. Available in single, or 90 degree dual styles. Fits all carburetors or TBI with 5-1/8" neck. Includes Spectre’s HPR air fi lter.SP98801 single ................................. 229.99 ea SP98891 90 degree dual ................... 229.99 ea

SP98891

SP98801

Universal 14" Air FilterAirAid’s Concept II filter features a beautiful lightweight aluminum lid that’s perfect for user customization. The curved top enhances air fl ow and provides additional clearance for the carburetor fl oat bowl vents. Along with the redesigned lid, the Concept II also features a new base that enhances air fl ow. The fi lter element features SynthaMax material, a 100% synthetic, non-oiled, color fast, classic red media. Billet tool and key fob included. Made in USA.AR801461 5" element ...................... 171.99 ea

Replacement Air Cleaners

Tri-Star Chrome Air Cleaner Wing NutAir cleaner Tri-Star nut offers a unique, performance appearance and will fi t virtually any air cleaner. Available in large or small format. 66201 small .......................................... 1.99 ea 66200 large ........................................... 2.99 ea

6620166200

Hi-Tech Air Cleaner Wing NutAvailable in both large and small sizes! The large size is recommended for 10" or 14" air cleaner kits and the small for 6-3/4" or 4-7/16" air cleaners. Each air cleaner spinner is die-cast showing the logo, coated with clear epoxy. They fi t both 1/4" - 20 and 5/16" - 18 studs. D141332 small .................................. 16.99 ea D141327 large ................................... 15.99 ea

1967-81 Standard Air Cleaner Wing NutCorrect wing nut used with all 1/4" carburetor studs. After years of use your original air cleaner can become rusted or broken. These wing nuts are the perfect replacement for a rusty or damaged original. 219281 1967-81 chrome .................. 4.99 ea A13258 1967-81 standard ................ 1.99 ea

219281 A13258

D141332

D141327

Air Cleaner Adaptor Carb NeckUse to adapt an air cleaner with 5-1/8" opening to a carburetor with a 4-7/32" fl ange.66315 .................................................... 6.99 ea

Air Cleaner SpacerThese 5-1/8" diameter plastic spacers from Edelbrock get you the clearance you need between the carburetor and air cleaner base. Available in 1/2" and 3/4" sizes. Made in USA. E8093 1/2" tall spacer ....................... 13.99 ea E8092 3/4" tall spacer ....................... 8.99 ea

E8092

Rubber Air Cleaner Base GasketThis Buna rubber air cleaner base gasket forms a positive seal between the air cleaner and the top of carburetors with a 5-1/8" neck. Designed for air cleaners with a straight lip, the gasket has a groove that fi ts over the lip for a superior seal against dust and debris. It can also be fl ipped and used on air cleaners with a rolled lip. 297331 ................................................ 9.99 ea

1967-81 Carburetor to Air Cleaner StudReplacement carburetor stud for all 1967-81 models equipped with Rochester and Carter carburetors. 3851738 1967-81 1/4"-20 x 2-5/16" .. 6.99 ea

1994-97 Inlet Air Temp Relocator The JET IAT Relocator kit repositions the inlet air temperature sensor to a cooler location in the air intake system to provide a lower air temperature reading to the computer. By doing this throttle response and horsepower are increased along with improved drivability. No other vehicle modifi cations are required, but the kit is compatible with other aftermarket upgrades such as computer upgrades, cold air intakes, free fl ow exhaust systems, etc. JT61630 1994-97 350 LT1.............. 44.99 ea

E4266E4268

standard fl ange deep fl ange

Elite Series Air CleanerDesigned to match the Elite Series valve covers and breathers. All Elite series air cleaners have polished aluminum fi nned tops with a black matte background. Available with the Edelbrock logo. All include a black anodized knurled nut and PCV adapter. For 5-1/8" carburetor necks.Round 14" Diameter with 3" ElementE4268 standard fl ange ...................... 140.99 ea E4266 deep fl ange ............................ 126.99 ea

E4266

KK

En

gin

es &

Co

mp

on

en

ts

473WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Air Cleaner Products

Chrome Air Cleaner ShroudKeep dirt out of your air cleaner without losing breathing capacity. Fits 14" air cleaners with 3" elements. This shroud will dress your engine compartment and compliment your chrome air cleaner. T2337 .................................................. 11.99 ea

Air Cleaner Products

1980-81 Air Cleaner Sensor UnitGenuine AC Delco air sensors install in the air cleaner snorkel which allows the fl apper door located in the snorkel to open allowing cooler air to enter. G10044 1980 301 w/perf. option .. 76.99 ea G1313 1980-81 305 .......................... 80.99 eaG10044 1980-81 4.9L ......................... 76.99 ea G10044 1981 301 all ..................... 76.99 ea

G1313

1999-02 Air Cleaner ResonatorGenuine GM resonator that connect to the front of the air cleaner cover.G4262 1999-02 6 cylinder ......... 118.99 ea G4266 2000-02 8 cylinder ......... 74.95 ea

1993-97 Intake Air DuctGenuine GM air duct that connects the mass air fl ow sensor to the intake manifold.Rear Air DuctG4254 1993-94 8 cyl. with AC ..... 295.99 ea G4255 1993-94 8 cyl. without AC 96.99 ea G4257 1995 8 cyl. without AC 166.99 ea

1998-02 Air Temperature SensorGenuine AC Delco sensor mounts on the duct between the mass air fl ow sensor and the throttle body.G4263 1998-02 .................................... 17.99 ea

G4262

TA4039

TA4040

1973-81 Air Cleaner Duct Housing AdapterReproduction of the ABS plastic air cleaner duct housing adapter used on 1973-81 Trans Am models. This part mounts on the air cleaner and converts the 2" x 6" oval hole on the air cleaner the 4" round air duct hose on the fender air scoop.14401 1973-81 .................................... 52.99 ea

1998-02 Air Cleaner HousingGenuine GM air cleaner housing for the air fi lter on all 1998-02 Firebird models.G4260 1998-02 all ....................... 180.99 ea

1998-02 Cool Air IntakeVolant cool air intakes are all about providing performance while adding a look of style and attitude to your fuel injected Firebird. This is the only intake that draws cool air from outside the HOT engine compartment! This is accomplished by concealing the high fl ow gauze cone fi lter inside a roto-molded cool air box, forcing the intake to draw air through the fender and grill areas. This provides the coolest air charge to your fuel injection and creates the most horsepower possible. By isolating the air fi lter, it prevents excessive engine noise while still providing the optimum performance. Volant manufactures each cool air box with a stylish look and connects the components using high-performance silicone couplers.V15958 1998-02 5.7...................... 274.99 ea

The only intake that draws cool air from outside the HOT engine compartment!

1977-79 Trans Am Air Cleaner ElbowReproduction Oldsmobile 403 engine air cleaner to vent pipe rubber elbow for 1977-79 Trans Am models. This elbow connects the breather pipe to the air cleaner and valve cover breather.TA4039 1977-79 long ....................... 8.99 ea TA4040 1977-79 short ....................... 8.99 ea

1973-79 Air Intake Duct HoseThis reproduction duct hose for 1973-79 Firebird models delivers fresh cool air from the fender to the air cleaner. Manufactured from 4" wire reinforced plastic skinned fl exible tubing, this duct hose includes correct factory style clamps riveted to the wire reinforcement.Note: Not for use with 1977-81 Pontiac 301ci engines. 162912 1973-79 ................................. 34.99 ea

1981-83 Early Fuel Evaporation RelayReproduction fuel evaporation relay designed to replace non-functional original relays.19868 1981 305 .................... 19.99 ea 19868 1982-83 2.8L ................... 19.99 ea

G4254

Air Cleaner Lid SealReproduction air cleaner lid seal designed to seal between the lid and the base for your 1961-81 Firebird models. Measurements: 59" overall length x 5-16" wide.K2017 ................................................. 9.99 ea

detail

En

gin

es &

Co

mp

on

en

ts

474

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

HPR® Air FilterSpeed by Spectre HPR® (high-performance racing) air fi lters – the world’s fastest air fi lters! Washable and reusable, these lifetime fi lters are designed to provide you with more horsepower and quicker acceleration by allowing more air fl ow into your engine than ordinary paper fi lters.Round Filter – 14" x 4" SP71014A blue ................................. 39.99 ea SP71014B black ............................... 39.99 ea SP71014C red .................................. 39.99 ea SP71014D white ............................... 39.99 ea Round Filter – 14" x 5" SP71015A blue ................................. 61.99 ea SP71015B black ............................... 61.99 ea SP71015C red .................................. 61.99 ea SP71015D white ............................... 61.99 ea Oval Filter – 11-1/2" x 8" x 2" SP71016A blue ................................. 29.99 ea SP71016B black ............................... 29.99 ea SP71016C red .................................. 29.99 ea SP71016D white ............................... 29.99 ea Oval Filter – 15" x 8" x 2" SP71017A blue ................................. 39.99 ea SP71017B black ............................... 39.99 ea SP71017C red .................................. 39.99 ea Triangle Filter – 14" x 3" SP71018C red .................................. 49.99 ea SP71018D white ............................... 49.99 ea

blue black red white

SP71015B

SP71014A

SP71018C

SP71016C

SP74762C

Extrafl ow 14" Air CleanerThese muscle car air cleaners combine a modern appearance with the classic style of the past. Washable and reusable, these lifetime fi lters provide more power and performance by allowing more air fl ow into your engine than ordinary paper fi lters. Includes: the top, base, and Spectre HPR® air fi lter. Specify color when ordering.SP74762 3" tall fi lter ......................... 112.99 ea SP74763 4" tall fi lter ......................... 141.99 ea

A – blue

A – blue

B – black

B – black

C – red

C – red

SP72001A

D – white

D – white

Accucharge Precision Air Filter Oiling SystemThe Accucharge precision oiling system applies the correct amount of oil for optimal performance – no more, no less. Designed specifi cally for cleaning and oiling of Spectre HPR® fi lters. As simple to use as a measuring cup! Includes 12 oz.of cleaner and 8 oz. of oil. SP704820 ............................................. 12.99 ea

HPR® Cone Air FilterThese Spectre HPR® air fi lters are the most versatile of their kind on the market! Designed to fi t 3", 3-1/2", and 4" tubes. Washable and reusable, these lifetime fi lters provide more power and performance by allowing more air fl ow into your engine than ordinary paper fi lters. Specify color when ordering.Note: *Will only fi t 3" inlet tubes. Also features all-rubber construction, no chrome fi nish.SP71011 3.7" tall ............................... 19.99 ea SP71010 * 6.5" tall ............................... 19.99 ea SP71012 6.7" tall ............................... 29.99 ea SP71013 10.5" tall ............................. 39.99 ea

SP71013DSP71010A

Blade Style MAFS ConversionConvert a 3 wire or 5 wire boot-in GM style MAFS (Mass Air Flow Sensor) to a drop-in blade style MAFS with these conversions. Includes one GM blade style MAFS, weld-on MAFS mount, two screws, and conversion harness.Important: Requires computer reprogramming.Note: This product is not CARB exempt. SP72001A 3 wire ............................. 349.99 ea SP72001B 5 wire ............................. 349.99 ea

Performance Induction

Universal 14" Air BoxDirect cool air into your engine with these universal air boxes. Includes components and hardware for installation in most vehicles. 180, 135, and 120 degree versions are available. Available in 14" black ducting. Fits standard 5-1/8" carb neck. Comes complete with Speed By Spectre HPR air fi lter that is engineered for increased fl ow and greater performance.Important: This product is not C. A. R. B. (California Air Resources Board) exempt. Products that are not C.A.R.B. exempt are legal in most states, but may not be used in California or states with similar emissions control laws except on pre-1976 vehicles.SP70228A black duct 180 degree .. 175.99 ea SP70328A black duct 135 degree .. 175.99 ea SP70338A black duct 120 degree .. 167.99 ea

SP70228A

SP70338A

SP70328A

Cool-Air Tube Heat ShieldThe Cool-Air tube heat shield features a unique lace-up design. This unique design allows this heat shield to fi t air tubes from 2-1/2" to 4" in diameter, up to 3 feet in length. Like most of Thermo-Tec’s products, it blocks more than 90% of radiant heat from the exhaust, protecting the air tube and the fresh air within from the destructive effects of high heat. For an added kick, Cool-Air Tube Heat Shield includes laces in four cool colors – white, blue, red, and yellow! TT14500 ............................................... 46.99 ea

Performance Induction

SP71017B

KK

En

gin

es &

Co

mp

on

en

ts

475WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Valve Covers

Valve Covers

Vintage Series Small Block Valve CoversVintage Series valve covers are designed to fi t all 1977-86 small block Chevrolet engines with perimeter bolt patterns. The die-cast aluminum construction ensures superb detail and reduces the chance of warped valve cover fl anges and oil leaks. The valve covers stand 3-1/2" tall with preinstalled internal oil baffl es on emission compliant models. The oil fi ll and PCV grommets are also included.Note: If your engine has non-standard valvetrain components, such as a high lift camshaft, roller tip rocker arm, higher lift ratio rocker arms, stud girdles, etc., there may be insuffi cient clearance.1977-86 Small Block 262-400ciH241240 natural with oil fi ll hole .. 133.99 pr H241243 natural ............................ 133.99 pr H241241 polished with oil fi ll hole .. 168.99 pr H241244 polished ............................ 168.99 pr H241242 black with oil fi ll hole .. 150.99 pr H241245 black ............................ 150.99 pr

H241243

H241245

H241244

H241240

Fauxsmobile Valve CoversThese vintage style valve covers are modeled after the valve covers of the 1949-50 Oldsmobile Rocket engine and fi t any small block Chevy motor with center bolt heads or used with an adapter on 1955-85 fl ange bolt heads. Made from die-cast aluminum with genuine Olds style spark plug wire looms which hide the oil fi ll and PCV plumbing underneath. Includes special chrome acorn nuts and all required hardware. Wire looms are available in paintable raw cast or triple chrome-plated. “OLDSMOBILE ROCKET” decals included.Paintable Raw Cast Covers CL8002 with raw cast wire looms .. 154.99 set CL8003 with chrome wire looms .... 181.99 set Polished Covers CL8004 with chrome wire looms .... 207.99 set Valve Cover Adapters CL8100 includes hardware ............. 129.99 set

CL8002

“shown painted for illustration purposes”

Finned Aluminum Valve CoversThese reproduction fi nned aluminum valve covers were part of a factory option dress-up kit for small block Corvette and Camaro models. Valve covers are made from heavy cast aluminum featuring oil drippers and baffl es. Sets are available in both black powder coated and polished fi nishes. Left side covers feature an oil fi ll hole and a hole for a PCV valve. Right side covers have a hole for the air cleaner elbow. Covers are sold in pairs and include gaskets.Note: Installation requires bolts made specifi cally for aluminum valve covers. Use K0070. Emblems and grommets not included.A7700210 1959-86 black pdr coated 260.99 pr A7700211 1959-86 polished ............. 257.99 pr

A7700211

also available in black Elite Series II Valve CoversFeatures a design that is infl uenced by the original Elite Series released in 1985, but with a new modern take on this classic look. They’re made from heavy gauge, die-cast aluminum and are fi nished off with a show quality high luster polished fi nish. The raised fi ns are accented by a contrast gloss black fi nish between the fi ns for the defi nitive Elite Series look. Edelbrock’s tall profi le valve covers are 2" taller than stock, and clear most roller rockers and valvetrain components. Our low profi le valve covers clear all air conditioning, alternator brackets and aluminum rockers. Overall height is measured from gasket fl ange to top at the highest point.1977-86 Small Block 262-400ciE4263 tall, polished fi nished ............ 151.99 pr

Classic Aluminum Valve CoversEdelbrock fi rst made these valve covers in the late 1950’s and they’re still a classic. Made of heavy gauge, sand cast aluminum, they have enough height to clear roller rockers. Polished or black powder coated fi nish.Important: Breathers E4201 or E4211 can be added if desired. 1979-86 Small Block 262-400ciE4145 polished ............................ 246.99 pr E4144 polished with oil fi ll hole .. 272.99 pr E41453 black ............................ 265.99 pr E41443 black with oil fi ll hole .. 299.99 pr

E4145

E41453

E41443 – oil fi ll hole detail

Fabricated Aluminum Valve CoversSniper’s fabricated aluminum valve covers gives you an excellent way to add a high end fabricated look without the high end price. They offer you a lightweight and tough valve cover for your favorite street, off-road,or racing machine. These valve covers are constructed of 6061-TS sheet aluminum and precision TIG welded for a proper fi t. Available in silver anodized or black coated fi nishes. Covers include mounting hardware for quick and simple installation.

Natural Finish1959-86H890010 283-400 small block ........ 133.99 pr 1965-LaterH890004 396-454 big block ........... 145.99 pr

Black Finish1959-86H890010B 283-400 small block ........ 138.99 pr 1965-LaterH890004B 396-454 big block ........... 150.99 pr

H890004B

H890010

En

gin

es &

Co

mp

on

en

ts

476

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.govValve Covers

Valve Covers

Pontiac 301-455 Valve CoversAftermarket style chrome valve covers for all Pontiacs with 301-455 V8. This chrome valve cover is a high profi le cover featuring triple chrome-plating. Dress-up your engine compartment with this aftermarket chrome valve cover. Pontiac engines only. Note: Not for use on cars with AC. T9300 Pontiac 301-455 ....................... 24.99 pr

1977-92 Chevy Small Block Valve CoverDirect replacements for damaged original valve covers for 1977-92 Firebird equipped with Chevrolet V8 small block engines. These valve covers are designed to replace originals which may have suffered dents or other signs of neglect. Features Genuine GM black fi nish.Note: Valve covers do not include grommets which may be purchased separately.Left Hand SideG7206 1977-86 V8 ......................... 79.99 eaG7209 1987-88 5.0-E/F/H & 5.7-8 81.99 ea G7209 1989 5.0-E/F and 5.7-8 81.99 ea G7210 1990-92 5.0-E ..................... 83.99 ea G7209 1990-92 5.0-F and 5.7-8 ..... 81.99 ea Right Hand SideG7208 1987-88 5.0-E/F/H & 5.7-8 ... 74.99 ea G7208 1989 5.0-E/F and 5.7-8 74.99 ea G7208 1990-92 5.0-E ..................... 74.99 ea G7209 1990-92 5.0-F and 5.7-8 ..... 81.99 ea G7211 1990-92 5.0-F and 5.7-8 ..... 78.99 ea

T9461

TA4036

1977-86 Chevy SB Aluminum Valve CoversNow you can easily check your valve train while the engine is running. The diagonal cut of the top section ensures no mess. Each valve cover features oversize bolts for fast removal, a top and bottom section, and a retained gasket for a tight seal. Will clear roller rockers and stud girdles. Includes required Allen wrench. Fits Chevrolet small block 1977-86 engines. Removable OEM style baffl e. Valve covers come equipped with baffl e and grommets. Sold in pairs. 141915 1977-86 valve covers .... 206.99 pr 141916 1977-86 gasket set ......... 21.99 set

Small Block Chevrolet Valve CoversDie-cast fi nned aluminum valve covers for small block Chevrolet motors are available in a highly polished fi nish.Note: Breather caps not included.Polished AluminumVC4002 350....................................... 209.99 pr

G7206

G7210

G7209

G7211

1977-79 Trans Am Valve CoversValve cover for 1977-79 Trans Am models with Oldsmobile 403 engines. These Oldsmobile factory correct notched valve covers feature correct baffl e design and factory spot welds and valve covers are chrome-plated for corrosion resistance and long-lasting good looks. Available in either paint to match or chrome fi nish.Note: Due to variations in cylinder heads only fi ve bolts may be required to securely mount valve covers.TA4036 1977-79 chrome ............... 233.99 pr TA4035 1977-79 paint to match .... 259.99 pr

1977-86 Clear Vue SB Chevy Valve CoversClear Vue valve covers show off your valve train to make any custom motor unique. These covers are manufactured from a heat resistant clear material that will not warp, haze, or become yellow over time. Oil sheets off after high RPM in about 30 seconds. These valve covers are NHRA certifi ed for Sportsman Gas Class vehicles. Sets include two clear valve covers, two stainless steel defl ector plates and two chrome breather caps with grommets. Made in USA.Important: Spreader bars recommended for installation. Not for use on methanol supercharged engines. 10110 1977-86 .................................. 389.99 set

301-455 Low Profi le Chrome Valve CoversDress-up your engine compartment with these aftermarket and OEM style valve covers for 1967-81 Pontiac models with 301-455 V8 (except turbo). These triple chrome-plated valve covers feature a low profi le design and are available in double ribbed form or with a smooth design. Ribbed valve covers are designed for push-in oil caps. Smooth valve covers are designed for a twist-on oil cap on the left side with a breather opening on the right and are available with drippers to get the oil where it needs to be to reduce wear on your engine. T9461 ribbed w/o drippers ..... 31.99 pr A8700118 smooth w/o drippers ..... 109.99 pr N9460 smooth with drippers .... 135.99 pr

N9460

Streamline Series Valve CoversGet a fresh new look for your small block Chevy engine! These tall valve covers are manufactured from cast aluminum with polished two piece billet accents. Available with a satin black powder coated or bead blasted and ready to paint. Includes stainless steel hardware and baffl es. A great complement to Streamline series air cleaners! Made in USA. 952240 black .................................. 224.99 pr 952241 ready to fi nish .................... 224.99 pr

952240

141915

KK

En

gin

es &

Co

mp

on

en

ts

477WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Valve Covers

Pontiac Engine Dress-Up SetDress-up your Firebird with this great set which includes chrome valve covers, hold down tabs for valve covers, chrome breather, breather grommet, PCV grommet. Fits Pontiac 301-455 V8 engines. This unique set will completely dress your engine compartment and includes virtually every chrome component you’ll need to impress even the most hard core Pontiac enthusiast! We offer this chrome dress-up set with baffl ed valve covers. Note: This set will fi t all Pontiacs except 389 and 403 models. Not for use on vehicles originally equipped with air conditioning.T3100 3-1/2" high ............................. 123.99 set

Pontiac Aluminum Valve CoversDie-cast fi nned aluminum Pontiac valve covers. These high-quality valve covers feature a bright polished fi nish and include two chrome breather caps and grommets. Fits Pontiac 301-455 engines.VC8001 Pontiac 301-455 .................. 299.99 pr

1962-79 Aluminum Valve CoversEdelbrock made these valve covers in the late 50’s, and they’re still classy today. Made of heavy gauge, sand cast aluminum, they have enough height to clear the rockers.Pontiac 301-455E4130 1962-79 polished fi nish ..... 296.99 pr E41303 1962-79 black fi nish ......... 275.99 pr Chevrolet Small BlockE4145 polished ............................ 246.99 pr E4144 polished with oil fi ll hole .. 272.99 pr E41453 black ............................ 265.99 pr E41443 black with oil fi ll hole .. 299.99 pr

E4130

M/T Valve CoversEach die-cast valve cover is precision manufactured with knock-out plugs for stock PCV (smog control) and oil fi ll installations. Available for small block Chevy engines in either polished or krinkle black fi nish.H24182 SBC polished ................. 199.99 pr H24183 SBC krinkle black .......... 171.99 pr

H24183

H24182

1993-97 Aluminum LT1 Valve CoversThese premium valve covers are designed specifi cally for 1993-97 GM LT1 engines. Manufactured from cast aluminum and polished to a high luster. Valve covers include new bolts, baffl es, and grommets.Note: Gaskets not included. 6045 1993-97 LT1 valve covers ... 134.99 pr

Billet Aluminum LS Valve CoversGive your LS engine a clean, classic look with these billet valve covers! Their modular design incorporates billet tops to cover the ignition coils and the oil cap to provide the appearance of traditional ribbed aluminum valve covers. Available in black anodized or mirror polished fi nish for LS1 and LS3 engines. Includes: billet oil cap, polished ARP stainless steel hardware, and installation instructions. Made in USA.Important: Must be used with engine model specifi c OEM GM ignition coils. 95470 LS3 polished ................. 1134.99 pr 95475 LS3 black ...................... 1376.99 pr

95470

95475

Valve Covers

1967-86 Signature Series Valve CoversEngineered for function and good looks, triple chrome-plated or black powder coated finish. Signature Series valve covers have stock style breather baffl es that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment including PCV valve. Rubber grommets for the breather and PCV holes are included. Matching breathers are sold separately.Important: *Fits 10 bolt heads only.Pontiac 301-455E4456 1967-79 no baffl e, chrome ... 69.99 pr E4453 1967-79 no baffl e, black ....... 62.99 pr Oldsmobile 350 and 403E4485* 1967-80 stock height, chrome 66.99 pr Chevrolet Small BlockE4449 1977-86 low profi le, chrome 45.99 pr E4443 1977-86 low profi le, black.... 45.99 pr E4649 1977-86 tall profi le, chrome . 56.99 pr Chevrolet Big BlockE4480 1967-86 low profi le, chrome 62.99 pr E4483 1967-86 low profi le, black ... 71.99 pr E4680 1967-86 tall profi le, chrome . 67.99 pr E4683 1967-86 tall profi le, black .... 75.99 pr

E4485

E4453

E4144

E4449

En

gin

es &

Co

mp

on

en

ts

478

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

1967-02 PCV ValveA PCV valve is a vacuum controlled metering device that regulates the fl ow of crankcase fumes in the positive crankcase ventilation system by allowing more fl ow at high speed than at low speed, and acts as a system shutoff in case of engine backfi re to prevent an explosion in the crankcase. It is recommended to replace your PCV valves every tune-up. Fits 1967-02 six and eight cylinder Firebird models. 6 CylinderPCV100 1970-73 250 ........................ 3.99 ea PCV180 1974-76 250 ........................ 3.99 ea PCV100 1977-81 231 ........................ 3.99 ea PCV89 1978 231 AT (exc. CA) .. 3.99 ea PCV117 1982 2.8L ....................... 3.99 ea PCV82 1983-84 2.8L ....................... 6.99 ea PCV68 1985-89 2.8L ....................... 4.99 ea PCV100 1989 3.8L ....................... 3.99 ea PCV68 1990-92 3.1L ....................... 4.99 ea PCV82 1993-95 3.4L ....................... 6.99 ea PCV68 1995-02 3.8L ....................... 4.99 ea 8 CylinderPCV20 1967-76 all .......................... 2.99 ea PCV100 1976 350 w/2barrel, AT 3.99 ea PCV80 1977 301 ........................ 3.99 ea PCV76 1977-89 305 ........................ 2.99 ea PCV20 1977 350, 400, 403 ........ 2.99 ea PCV76 1978-79 350 ........................ 2.99 ea PCV20 1977-79 400, 403 ................ 2.99 ea PCV80 1979-80 301 w/o turbo & HP .. 3.99 ea PCV103 1980-81 301 w/HP exc. turbo... 3.99 ea PCV80 1980-81 301 with turbo ...... 3.99 ea PCV76 1981 267 ........................ 2.99 ea PCV76 1987-89 5.7L ....................... 2.99 ea PCV82 1990-92 5.0L-F ................... 6.99 ea PCV76 1990-92 5.0L-E ................... 2.99 ea PCV82 1990-92 5.7L ....................... 6.99 ea PCV224 2000-02 5.7L ....................... 3.99 ea

PCV68PCV82

PCV Valves & Components

Aluminum PCV ValveThis aluminum housed PCV valve is just what you need to fi nish your engine bay detailing project. Manufactured with a 3/4" neck for 3/4" i.d. grommets. Note: Rubber grommet not included. T6068 polished PCV valve ................. 19.99 ea T6067 chrome PCV valve .................. 21.99 ea

Universal Crankcase Evacuation SystemThis universal crankcase evacuation system is designed for high-performance and racing applications. It replaces the standard PCV to air cleaner system by connecting to the exhaust system allowing exhaust pressure to pull the gasses from the crankcase. Includes two simple pipes with one way valves that weld to the header collectors and are connected to dual valve cover breathers.Note: Not for use on pollution controlled vehicles. For valve covers with 1-1/4" holes. Hoses are not included. 20501 crankcase evacuation ............. 39.99 set

Dual Flow Adjustable PCV ValveStock PCV valves are not designed to work with modifi ed high-performance engines due to their altered vacuum profi les. A mismatched PCV valve can cause oil to push out of your breathers, cause oil leaks, or contaminate your oil with piston blow by gasses. Now you can manage your crankcase pressure with this fully adjustable 6061-T6 billet aluminum dual-fl ow PCV valve. Once adjusted, the valve will provide suffi cient crankcase ventilation during both idle and cruise. Valve fi ts 3/4" i.d. valve cover grommets and 3/8" i.d. PCV lines. An available adapter allows for installation on 3/8" i.d. inline applications. PCV valve set includes valve, vacuum gauge fi tting, Allen wrench, and detailed instructions. Made in USA.Note: Not intended for use on pollution controlled vehicles. DF1700 adjustable PCV valve ........ 128.99 ea DF1701 billet inline adapter ........... 24.99 ea DF1702 PCV valve rebuild set ....... 15.99 set

DF1701DF1700

T6068 T6067

1967-69 PCV Valve Hose ClampFor use with PCV valve hose and power brake valve hose. Correct style black pinch clamp.K0051 1967-69 ........................................ .99 ea

1967-69 OEM PCV Valve HoseExcellent quality reproduction, thick walled hose with 90 degree bend as original. Clamps included. For use with all applications.K0058 1967-69 .................................. 14.99 ea

1968-76 Air Cleaner Vent TubeReproduction vent tubes designed to fi t on the RH valve cover. Available for 1968-76 models. Check the listings below for correct tubes for your year and model. FAC6801 1968-74 without Ram Air .... 29.99 ea A8700105 1969 TA with Ram Air ... 29.99 ea FAC6901 1969-70 Ram Air ................. 42.99 ea FAC7001 1971-72 Ram Air ................. 42.99 ea A8700106 1971-76 TA w/shaker scoop 29.99 ea

FAC6801

FAC6901

FAC7001 A8700105

A8700106

Specialty GrommetsThis is a rubber oil baffl e and breather grommet all in one! The angled slots on the bottom and foam insert stop oil seepage and act as a baffl e. Installs on all steel valve covers with 1-1/4" diameter breather holes. Utility plug manufactured in rubber for valve covers with 1-1/4" diameter holes. Will plug up the opening hole when not using PCV or oil fi ller cap applications. T9358 rubber baffl e, each .................. 1.99 ea T9359 rubber baffl e, pair ................... 2.99 pr G7229 utility plug .............................. 6.99 ea

T9358 G7229

PCV Valves

Keep Your Oil Cleaner with an Adjustable PCV Valve!

1967 V8 PCV Hose ConnectorPCV hose connector available for all 1967 V8 Firebirds. Each part is manufactured as original with the correct OEM markings and nylon material for an authentic replacement.A8700315 1967...................................... 16.99 ea

1971-92 Valve Cover GrommetWe offer a full line of replacement valve cover grommets. These are the correct grommets which insert into the valve cover where the PCV or air cleaner to valve cover elbow is inserted. Choose from a wide variety of 6 or 8 cylinder grommets depending on your year and model.T4998 1971-75 250 ...................... 2.99 ea T4998 1976 V8 (with AC) ...... 2.99 ea G9095 1977-79 305, 350-L .......... 3.99 ea T4998 1977-79 400, 403 .............. 2.99 ea 1381487 1978 350-X .................. 5.99 ea 1381487 1981 231-A .................. 5.99 ea 9776721 1981-84 all 1" dia. hole ..... 2.99 ea 1381487 1989 3.8-7 .................... 5.99 ea D141615 1967-79 V8 ....................... 6.99 pr G9095 1980-92 V8 ....................... 3.99 ea

G9095 9776721

KK

En

gin

es &

Co

mp

on

en

ts

479WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Chrome Valve Cover BreatherYour choice of any of these aftermarket style valve cover breathers. Each chrome breather and fi ller cap includes the highest quality chrome available for each application. Choose from “push-in”, “push-on” or “twist-on” styles and breathers with or without 1/2" PCV tubes.

Circular Valve Cover BreathersWithout PCV Tube66008 push-in, 3" dia., fi ts 1" i.d. .......... 4.99 ea 66035 push-in, 3" dia., fi ts 3/4" i.d. ....... 6.99 ea 66010 twist-on, 3" dia. .......................... 9.99 ea With PCV Tube66017 push-in, w/1/2" PCV tube, 3" dia., for 7/8" i.d. grommet .................. 8.99 ea T9242 push-in, w/1/2" PCV 2-3/4" dia., for 7/8" i.d. grommet ................. 6.99 ea T4806 twist-on, w/1/2" PCV , 3" dia. .... 10.99 ea

66008

1967 OE Style Oil Breather CapThis OE style oil cap is designed to fi t 1967 six and eight cylinder applications. Available for models with or without air. Choose from the twist-on or push-on styles.Without California EmissionsST10061 1967 6 cylinder push-on .. 6.99 ea ST10064 1967 326 & 400 twist-on .. 6.99 ea With California EmissionsST10070 1967 6 cylinder push-on .. 6.99 ea ST10070 1967 326 & 400 push-on .. 6.99 ea

1967 Chrome Oil Breather CapThis is an exact reproduction of the original style valve cover breather cap. This cap is chrome and has the correct double dimples with the embossed “AC-OIL” on top. This is a twist-on cap.F654 1967 chrome ..................... 36.99 ea

Push-In Chrome Breather CapChrome-plated oil breather caps in a variety of styles. Includes grommet to fi t valve covers with 1.25" hole. T9242 has 5/8" diameter PCV tube.T4871 without PCV tube ...................... 4.99 ea T9242 with PCV tube ........................... 6.99 ea

T4871

E4204

ST10061 – bottomST10061 – top

E4405

1977-79 Trans Am Valve Cover BreatherReproduction valve cover breather for 1977-79 Trans Am models with Oldsmobile 403 engine. This breather element fi ts into a valve cover rubber grommet.TA4041 1977-79 ................................... 12.99 ea

Oil/Breather Caps

Chrome Oil CapProform aftermarket chrome oil caps. Push-in style fi ts 1.25" holes.66018 push-in OIL ................. 5.99 ea D141631 twist-on GM ................. 15.99 ea

ST10066ST10072

ST10077

66018 D141631

ST10099

Replacement Oil CapHigh-quality Stant service replacement oil caps in a variety of styles for small block engines.Push-in Style for 1-1/4" HoleST10072 OIL ....................................... 2.19 ea Twist-on Style with TabsST10066 with ears ............................... 3.99 ea ST10077 ENGINE OIL FILL .................. 7.99 ea 1996-02 Plastic 1-17/32" Cam TwistST10099 with o-ring ............................ 5.99 ea 1989-92 Plastic 1-9/32" ThreadedST10105 .............................................. 3.99 ea

1977-79 Trans Am Oil Filler CapReproduction oil fi ller cap for 1977-79 Trans Am models with 403ci Olds V8 engines. TA4061 1977-79 Olds 403 ............. 19.99 ea

12535051253506

1968-79 Replacement AC Oil CapFactory correct reproduction AC oil fi ll caps. Chrome cap features 3 spot welds and AC in center as original. 1253505 1968-79 chrome .................... 34.99 ea 1253506 1968-79 FC2, paint to match 34.99 ea

1998-02 Oil Filler CapAC Delco replacement oil fi ller cap for use with all 1998-02 Firebird models with closed emission engines. This is a factory service replacement part which may very in appearance from the original. Twist-on style.G11513 1998-02 5.7 LS1 .................. 8.99 ea

1987-02 Screw-In Oil CapWhether your oil cap is lost or broken or the engine compartment just needs something to spice it up, these oil caps are perfect. Fits most 1987-02 GM valve covers with a screw-in style cap. Available in chrome-plated plastic or polished and chrome-plated billet aluminum. 96961 chrome-plated plastic ............... 6.99 ea 96962 polished billet aluminum .......... 17.99 ea 96963 chrome-plated billet aluminum 21.99 ea

96963

Oil/Breather Caps

T924296961

Valve Cover BreatherElite Series

Elite series breathers are die-cast aluminum with a foam element. 3 styles are available. The side mount and top mount breathers require drilling to install. E4204 push-in style with logo .............. 24.99 ea E4201 90 degree side mount with logo 27.99 ea E4202 30 degree top mount with logo .. 28.99 ea

Signature SeriesSignature Series inscribed breathers come with rubber grommets and match the Signature Series chrome valve covers. Fit any 1-1/4" hole. E4403 black powder coated w/o nipple 10.99 ea E4405 chrome without nipple ............... 10.99 ea E4410 chrome with 90 degree nipple ... 10.99 ea

En

gin

es &

Co

mp

on

en

ts

480

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Valve Cover Gaskets/Hardware

VCS3001

VCS3002

Aluminum Valve Cover SpacersAluminum valve cover spacers are used with any Pontiac or small block Chevrolet valve cover to give an additional 1" of rocker arm clearance. Pontiac 301-455VCS3001 polished aluminum .......... 104.99 pr VCS3002 black ................................ 109.99 pr Chevrolet Small BlockVCS2001 polished aluminum .......... 89.99 pr VCS2002 black ................................ 89.99 pr

Valve Cover Gaskets

Pontiac 301-455 Valve Cover GasketThese replacement valve cover gaskets are for use with 301-455 V8 engines. Although these are not an Genuine GM gaskets, they will replace your original exactly and offer years of use. Not for use with Super Duty or Ram Air models. T4334 ................................................. 19.99 pr

Chevrolet Valve Cover GasketValve cover gaskets are now available in your choice of original cork material or a variety of aftermarket materials. Chevrolet Small Block 305-350ciG7221 1977-86 cork (GM) 2 req ....... 24.99 ea T4323 1977-86 reproduction ............. 12.99 pr 80608 1987-92 rubber (OER®) 2 req 19.99 ea

T4323

Valve Cover Hold Downs and Wire LoomsThese innovative valve cover hold downs are ideal to prevent leakage for stamped small block Chevy valve covers. They are easy-to-install and by applying even pressure on the entire mounting fl ange, they’ll eliminate the possibility of leaks. Hold downs with wire looms also offer the advantage of attached spark plug wire looms for an ultra clean engine compartment. Your choice of with or without looms in a variety of colors.With Spark Plug Wire Looms66292C chrome .................................. 17.99 pr 66292B blue ....................................... 24.99 pr66292K black ..................................... 17.99 pr 66292R red ........................................ 34.99 prWithout Spark Plug Wire Looms66291C chrome .................................. 17.99 pr 66291K black ..................................... 17.99 pr

66292R

T4936 66006

66038

66650

Valve Cover Bolt SetThese reproduction valve cover bolts are for use on all Pontiac engines. Available in chrome or zinc fi nish.F6511 5/16"-18 x 21/32" zinc, 8 bolts 16.99 setT9423 5/16"-18 x 1" chrome, 4 bolts .. 4.99 set

F6511

1967-97 Valve Cover Bolt SetThe Pontiac Arrowhead logo is stamped directly onto the head of the bolts. They are available in decorative chrome-plated or polished stainless steel versions.

PontiacChrome56466CA 1967-79 5/16"-18 x 9/16" .. 16.99 set 56463CA 1978-87 1/4"-20 x 1/2" ...... 9.99 set Stainless Steel 56466SA 1978-87 1/4"-20 x 7/8" ...... 6.99 set

Center Hold Down Valve Cover BoltPurchase a replacement set or individual bolt and washer for center hold down valve covers.Note: All bolts and sets include washer.Bolts with Washer141133 1987-97 all, set of 8.................... 18.99 set G9101 1987 ..................................... 2.99 ea G9101 1988-92 5.0-E............................. 2.99 ea G8378 1988-92 5.0-F (LB9), 5.7-8 (L98) 3.25 ea G9101 1993-97 LT1 ............................... 2.99 ea WashersG8379 1986-87 5.0-F, 5.7 ...................... 4.89 ea

1977-86 Valve Cover BoltGenuine GM valve cover retaining hardware for Firebird models with small block Chevrolet engines.G8374 1977-86 1/4"-20 x 9/16" bolt ... 4.99 ea G8376 1977-86 spreader bar ............... 9.99 ea G8377 1977-86 1/4"-20 x 1-1/4" stud . 4.99 ea G1649 1977-86 1/4"-20 nut w/washer 4.99 ea

G8374 G8377

Valve Cover Bolt SetsThese 8 piece bolt sets are offered for Chevrolet small block engines in a choice of chromoly steel with a black oxide fi nish or corrosion proof polished stainless steel. Choose between conventional Hex head bolts and washers or compact, easy access 12 point designs. The heads feature a wide base for better load distribution and sealing (helps prevent those pesky gasket leaks), while the compact head is easily accessed. All sets are shipped with the required fl at washers and come with 1/4"-20 bolts except for the center bolted valve covers.For Cast Aluminum CoversAR1757 black oxide Hex head ....... 10.99 set AR1753 black oxide 12 point ......... 10.99 set AR4757 stainless Hex head ....... 16.99 set AR4753 stainless 12 point ......... 17.99 set For Stamped Steel CoversAR1755 black oxide Hex head ....... 10.99 set AR1751 black oxide 12 point ......... 11.99 set AR4755 stainless Hex head ....... 15.99 set AR4751 stainless 12 point ......... 16.99 set For 350 Chevy Center Bolted CoversAR1759 black oxide Hex head ....... 16.99 set AR1760 black oxide 12 point ......... 19.99 set AR4759 stainless Hex head ....... 24.99 set AR4760 stainless 12 point ......... 25.99 set

G9240

56466SA head detail

T9067T9641

141133

G9101

Valve Cover Hold DownsRegulates the pressure on the valve cover and prevents leakage. Available in mini-tab form, which is excellent for use in tight clearance locations.T9641 4 piece, 4-1/2" wide ................. 12.99 set T9067 4 piece, mini-tab hold downs ... 4.99 set G9240 6 cylinder, 6 required ............... 4.99 ea

1977-79 Trans Am Valve Cover BoltsReproduction valve cover bolts for 1977-79 Trans Am with 403ci Oldsmobile engine.Note: Due to variations in Oldsmobile cylinder heads only fi ve bolts per valve cover may be required.TA4034 1977-79 20 piece .............. 19.99 set

Valve Cover Hold Down NutsVarious styles of chrome hold down bolts sold in sets of 4 pieces.T-Bar Wing Nuts 66005 3-1/2" tall, 1/4"-20 studs .......... 12.99 set T4936 5" tall, 1/4"-20 studs ................. 12.99 set Chrome Wing Nuts 41371 3-1/2" tall, 1/4"-20 ................... 9.99 set 41381 3-1/2" tall, 5-16"-18 ................. 9.99 set Deluxe Wing Nuts 66006 4" tall, 1/4"-20 studs ................. 9.99 set 66036 4" tall, 5/16"-18 studs ............... 13.99 set Mini Nuts 66038 1/4"-20 studs ............................ 6.99 set 66650 stainless steel washers, 1/4"-20 13.99 set

AR1757

G8378

KK

En

gin

es &

Co

mp

on

en

ts

481WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

1967-85 Pontiac/Olds Performer RPM Intake ManifoldPerformer RPM manifolds are dual plane, high rise intake manifolds with a 180 degree fi ring order to produce incredible top end horsepower while retaining good throttle response. Their larger plenums and runners match the free fl owing exhaust, and high lift cams and other modifi cations of a high output engine. They are intended for high-performance street or competition engines that run up to 6500 RPM. Not intended for emissions controlled vehicles. A Performer RPM will give you the ultimate in street high-performance. Available with EnduraShine fi nish!Important: Modifi cations necessary for vehicles with Trans Am Shaker Hood.

Intake Manifolds

Performance Products

Performer Manifold 1967-85 Olds 350 and 403Designed for street 1967-85 350 and 403 Oldsmobile V8s. This manifold is a stock replacement/street legal part for 1967-72 350 and 403 V8s with 4 barrel and without stock EGR or 1972-85 350 and 403 with stock EGR except 1976 with back pressure EGRs. Includes EGR block-off plate for non-EGR applications. This manifold will clear HEI distributors. Use stock or replacement spread bore carburetors only. E3711 1967-85 EGR/non-EGR ............................................... 367.99 ea E8514 1967-79 intake manifold bolt set ................................. 31.99 set

Performer RPM Manifold 1967-85 Olds 350 and 403Designed for street 1967-85 350 and 403 Oldsmobile V8s. The Performer RPM Olds manifold is a high rise dual plane design with 180 degree fi ring order engineered for maximum top end horsepower while maintaining excellent throttle response. Port fl ange has extra material above the runner for use with Olds 455 heads. This manifold will clear HEI distributors. Carburetor pad will accept square bore or spread bore carbs without an adapter. E7111 1967-85 non-EGR ........................................................ 372.99 ea E8514 1967-79 intake manifold bolt set ................................. 31.99 set

Performer Manifolds 1967-79 Pontiac 326-455 V8Designed for 1967-79 326-455 Pontiac V8s. (except Ram Air IV). Will not fi t 265 or 301 Pontiac engines. Provides great throttle response and torque for performance you can feel. E2156 is a stock replacement/street legal part for 1962-72 326, 350, 389, 400, and 455 with 4 barrel carburetors and without stock EGR. E3756 is a stock replacement for 1973-79 326, 350, 389, 400, and 455 with 4 barrel carb and stock EGR. This manifold will clear HEI distributors. Use stock or replacement spread bore carburetors only. E2156 1967-79 non-EGR .......................................................... 338.99 ea E3756 1967-79 with EGR port.................................................. 355.99 eaE8559 1967-79 intake manifold bolt set ................................. 19.99 set

1967-85 Pontiac/Olds Performer Intake ManifoldPerformer manifolds are dual plane, low rise intake manifolds with a 180 degree fi ring order and patented runner design that you won’t fi nd on other brands. This patented design greatly improves torque over a wide RPM range, especially off-idle through the mid-range. Throttle response is excellent. Performers are ideal for passenger cars, trucks, 4 x 4s, tow vehicles, and RVs. There are EGR and non-EGR versions available for most GM V8s. Most performer intakes are 50 state street legal when used with the correct carburetor and in the correct application.Important: For Trans Am use stock carburetor for shaker hood clearance.

389-455 Pontiac Performer RPM ManifoldThis Performer RPM manifold and carburetor set for 389-455 Pontiacs makes it easy to upgrade your induction system with the best combination of Edelbrock performance in one simple box. The RPM Performer delivers the ultimate street performance from 1500 to 6000 RPM. This set features show quality Edelbrock manifold with EnduraShine fi nished, Edelbrock Thunder AVS 800 cfm carburetor with EnduraShine fi nished, a chrome fuel inlet, high-quality intake gasket set, Gasgacinch gasket sealer, intake bolt set, and carburetor stud set.Important: Modifi cations necessary for vehicles with Trans Am Shaker Hood.E20564 EnduraShine fi nish ......................................................... 1029.99 set

Performer RPM Manifold 1967-79 Pontiac 326-455 V8Designed for 1967-79 326-455 Pontiac V8s (except Ram Air IV). Will not fi t 265 or 301 Pontiac engines. Provides maximum high RPM power while maintaining good throttle response for street applications. Recommended for high-performance street or strip. This manifold will clear HEI distributors. Carburetor pad will accept square bore or spread bore carbs without an adapter. E7156 1967-79 non-EGR, natural fi nish ................................. 334.99 ea E71564 1967-79 non-EGR, EnduraShine™ fi nish ..................... 501.99 eaE8559 1967-79 intake manifold bolt set ................................. 19.99 set

E2156

E3756

E3711

E71564

E7111

En

gin

es &

Co

mp

on

en

ts

482

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.govIntake Manifolds

Intake Manifolds

Performer ManifoldsDual plane, low rise intake manifolds with a 180 degree fi ring order and patented runner design. Improves torque over a wide RPM range, especially from off idle through the mid-range. There are EGR and non-EGR versions available for most GM V8s, and most intakes are 50 state street legal when used with the correct carburetor and on the correct application.

1977-86 Chevrolet Small BlockImportant: Will also fi t 1987 and later stock aluminum cylinder heads. Will not fi t Chevrolet Bow Tie cast iron cylinder heads.Natural FinishE2101 non-EGR .............................. 192.99 ea E3701 with EGR ............................. 269.99 ea

1987-95 Small Block w/Cast Iron HeadsImportant: Not for 1987 and later stock aluminum cylinder heads. Will not fi t Chevrolet Bow Tie or LT1 cylinder heads.Natural FinishE2104 non-EGR .............................. 264.99 ea E3706 with EGR ............................. 312.99 ea 1996-up Small Block w/Iron Vortec Heads

Important: Will also fi t Edelbrock E-Tec heads. Natural FinishE2116 non-EGR .............................. 263.99 ea EnduraShine FinishE21164 non-EGR .............................. 404.99 ea

Performer EPSRunner design that is tuned for peak power around 3500 RPM on a Chevrolet 350 V8, and has a solid power range off idle to 5500 RPM.Important: Not for 1987 and later cast iron Chevrolet Bow Tie cylinder heads. Will fi t 1987 and later stock aluminum cylinder heads. Natural FinishE2701 non-EGR .............................. 149.99 ea EnduraShine FinishE27014 non-EGR .............................. 336.99 ea

E7101

Performer RPMDual plane, high rise intake manifolds with a 180 degree fi ring order to produce incredible top end horsepower while retaining good throttle response. Their larger plenums and runners match free fl owing exhaust, and high lift cams and other modifi cations of a high output engine. They are intended for high-performance street or competition engines that run up to 6500 RPM. Not for emissions controlled vehicles.

1977-86 Chevrolet Small BlockImportant: Will fi t cast iron Chevrolet Bow Tie cylinder heads, but will not fi t 1987 and later cast iron cylinder heads.Natural FinishE7101 non-EGR square bore...... 228.99 ea E7104 non-EGR spread bore...... 268.99 ea EnduraShine FinishE71014 non-EGR square bore...... 411.99 ea1996-up Small Block w/Iron Vortec Heads

Important: Will also fi t Edelbrock E-Tec heads. Natural FinishE7116 non-EGR ........................ 281.99 ea EnduraShine FinishE71164 non-EGR ........................ 391.99 ea

E2104

E2601

E75014

Performer Air GapThis award winning design incorporates the same race winning technology that’s been used by Edelbrock competition intakes for years. The Air Gap design features an open air space that separates the runners from hot engine oil, resulting in a cooler, denser intake charge that delivers more power. Performer Air Gap manifolds are ideal for street performance from idle to 5500 RPM.

1977-86 Chevrolet Small BlockNatural FinishE2601 non-EGR ............................... 307.99 ea EnduraShine FinishE26014 non-EGR ............................... 455.99 ea

Performer RPM Air GapThis award winning design incorporates the same race winning technology that’s been used by Edelbrock competition intakes for years. The Air Gap design features an open air space that separates the runners from hot engine oil, resulting in a cooler, denser intake charge that delivers more power. RPM Air Gap manifolds are modeled after Performer RPM intakes for street power from 1500 to 6500 RPM.

1977-86 Chevrolet Small BlockNatural FinishE7501 non-EGR .............................. 289.99 ea EnduraShine FinishE75014 non-EGR .............................. 476.99 ea1996-up Small Block w/Iron Vortec Heads

Important: Will also fi t Edelbrock E-Tec heads. Natural FinishE7516 non-EGR .............................. 356.99 ea EnduraShine FinishE75164 non-EGR .............................. 520.99 ea

E27014

E2025

E7525

RPM Dual Quad Air GapRPM Air Gap manifolds are ideal for street performance from idle to 5500 RPM. The full setup provides everything you need to run dual quads, including an RPM Air Gap dual quad intake manifold for oval port heads, two 500 cfm Thunder Series AVS carburetors (one manual choke, one electric choke), throttle linkage, fuel line and intake gasket set for a complete installation. Manifold also available separately. Choose from satin cast fi nish or chrome like EnduraShine fi nish.Note: Sets are shipped overweight.

With Carburetors

1977-86 Small Block E2025 265-400 natural ............ 1377.99 set E20254 265-400 EnduraShine ... 1644.99 set

Manifold Only1977-86 Chevrolet Small Block E7525 265-400 natural ............ 398.99 ea E75254 265-400 EnduraShine ... 536.99 ea

Performer EPS Vortec ManifoldAvailable for small block Chevrolet with Vortec or Edelbrock E-Tec cylinder heads, the performer EPS dual plane manifold is optimized to deliver superior performance with Edelbrock square bore Performer Series or Thunder Series AVS carburetors. The runner design is “tuned” for peak torque around 3500 RPM on a 350 inch engine and it’s ideal for off idle through 5500 RPM. Dyno-tests showed gains averaging 5+ ft lbs of torque from 3000 to 4500 RPM for more performance where you need it most. Match with a dependable Edelbrock square bore carburetor for maximum performance gains.Natural FinishE27161 Vortec ................................. 288.99 ea

KK

En

gin

es &

Co

mp

on

en

ts

483WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov Intake Manifolds

1969-70 Ram Air Intake Manifold SetThis intake manifold set features a reproduction of the factory aluminum intake manifold that came on 1969-70 Firebird/Trans Am cars with 400 Ram Air IV engine. It will also work on all 1965-79 Pontiacs with a 326, 350, 389, 400, 428, and 455 engines. It has a cast number and has the correct “W” snowfl ake logo which was used by Winters foundry. Set includes one aluminum intake manifold, one cast iron exhaust crossover and the correct factory two piece crossover heat shield which insulates the intake manifold from heat produced by the crossover.Note: Use intake manifold gasket #1233.14424 1969 cast #9796614 .......... 598.99 set 14425 1970 cast #9799084 .......... 598.99 set

1969-70 400 Ram Air IV Intake ManifoldThis is a reproduction of the factory aluminum intake manifold that came on 1969-70 Firebird/Trans Am cars with 400 Ram Air IV engine. It will also work on all 1965-79 Pontiacs with a 326, 350, 389, 400, 428, and 455 engines. It has a cast number and the correct “W” snowfl ake logo which was used by Winters foundry.Note: Use intake manifold gasket #1233.14420 1969 cast #9796614 ......... 367.99 ea 14421 1970 cast #9799084 ......... 367.99 ea

1971-72 455 HO Intake ManifoldThis is a reproduction of the factory aluminum intake manifold that came on 1971-72 Firebird/Trans Am cars with 455 HO engine. It will also work on all 1965-79 Pontiac 326, 350, 389, 400, 428, and 455 engines. It has a cast number and has the correct “W” snowfl ake logo which was used by Winters foundry.Note: Use intake manifold gasket #1233.14422 1971 cast #483674 ............ 367.99 ea 14423 1972 cast #485640 ............ 367.99 ea

Intake Manifolds

14422

14420

1971 HO Intake Manifold SetThis intake manifold set features a reproduction of the factory aluminum intake manifold that came on 1971 Firebird/Trans Am cars with 455 HO engine. It will also work on all 1965-79 Pontiac 326, 350, 389, 400, 428, and 455 engines, but is correct for 1971. It has cast number of 483674 and has the correct “W” snowfl ake logo which was used by Winters foundry. Set includes: one aluminum intake manifold, one cast iron exhaust crossover and the correct factory two piece crossover heat shield which insulates the intake manifold from heat produced by the crossover.Note: Use intake manifold gasket #1233.14426 1971 ........................................ 519.99 set

1969-71 Ram Air Intake CrossoverReproduction Ram Air intake crossover used on 1969-71 Pontiac models equipped with the optional Ram Air package. This air intake crossover mounts between the heads and under the intake to provide heat for the carburetor choke thermostat coil. This cast iron crossover is used on all Ram Air aluminum or HO intakes.14403 1969-71 .................................. 156.99 ea

1969-71 Ram Air and HO Crossover CoverThis is a reproduction of the cover that fi ts all Pontiac 400 or 455 motors with aluminum intake and a cast iron crossover. This cover surrounds the intake crossover and directs heat away from the intake manifold.F871 1969-71 ...................................... 109.99 set

1967-79 Intake Manifold GasketsThis is a reproduction of the original intake manifold gasket Pontiac used on V8 engines from 1967-79. This gasket can be used on 326-455 engines.1233 1967-79 V8 ............................ 24.99 set

1977-97 Intake Manifold GasketsHigh-quality intake manifold gaskets for V6 and small block engines. Produced by OE manufacturers from premium non-asbestos materials to meet or exceed original specifi cations.Note: For Chevrolet/GM corporate engines only.V6 Models 43150 1982-86 2.8L Carb .... 12.99 set 41520 1985-95 2.8-3.4L FI ........ 14.99 set Small Block Models 43221 1977-86 305-350ci ............ 14.99 set 43226 1985-92 305-350ci TPI ...... 33.99 set 43230 1987-92 305-350ci TBI ..... 9.99 set 43670 1993-97 350ci LT1 ............ 18.99 set

BK5005

43230

1997-04 LS1 and LS6 Intake ManifoldBoost horsepower and low end torque with this intake manifold from BBK. Designed for LS1 and LS6 engines, this intake improves the Z06 Corvette intake design with an 85mm straight through throttle inlet with rounded low restriction intake runners to allow an 18-24 horsepower increase on a base LS1 engine. Features a titanium powder coated fi nish and is available in sets with BBK Power Plus series 80mm throttle bodies with cable or electronic throttle controls. Uses factory rubber o-ring gaskets and includes mounting hardware and instructions. BK5004 1997-04 manifold only .......... 899.99 ea BK5005 1997-04 w/cable throttle body 799.99 setBK5006 1997-04 w/elec. throttle body 799.99 set

Intake Manifold GasketsThese gaskets are matched to Edelbrock Performer, Performer RPM and Victor Jr. cylinder heads and manifolds and designed to optimize performance and fl ow. Made of a new micro-pore synthetic fi ber composite, they are impervious to most chemicals and provide high recovery under compression. They will conform to imperfections on sealing surfaces at lower fl ange pressures and include a nitrile bead around each port opening for a durable seal. Made in USA.Small Block 302-400 with 1.28" x 2.09" Ports E7201 1958-86 .................................... 19.99 set

1955-86 Black Ceramic Coated IntakeThe carbon black ceramic coating provides an aggressive yet subtle look that goes perfectly with the understated build styles that are popular today. Plus the coating provides the added benefi ts of corrosion protection, heat resistance, and ease of cleaning. These dual plane, square bore, non-EGR manifolds fi t 262-400 small block Chevrolet engines. The Street Warrior manifold is 3.5" in the front and 4.5" in the rear and has a power band from idle – 5500 RPM. The Speed Warrior manifold is a high rise that is 4.19" in the front and 5.27" in the rear and has a power band from 1500-6700 RPM.H8120 1955-86 Street Warrior ...... 230.99 ea H8150 1955-86 Speed Warrior ...... 244.99 ea

H8120

14424

En

gin

es &

Co

mp

on

en

ts

484

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.govIntake Manifold

1973-74 Super Duty Valley Pan PlugTrans Am Super Duty valley pan plug. This black plug is required to close off the hole in the valley pan of Trans Am Super Duty engines.1253512 1973-74 ................................ 19.99 ea

1967-72 Intake Manifold FittingIntake manifold to air cleaner vacuum fi tting for Pontiac models. This fi tting mounts on the front of the manifold and allows the air cleaner vacuum pod to open under vacuum to allow warm air into the air cleaner to warm up the engine faster and to close at no vacuum.1253524 1967 all ........................ 8.99 ea 1253519 1968-72 V8, all ................. 16.99 ea

1970-78 Trans Am Engine Check ValveReproduction engine check valve for 1970-78 Trans Am models. This valve prevents vacuum from escaping the booster when the engine shuts off, allowing you to stop safely in the event of an unexpected stall.1253508 1970-78 ................................. 13.99 ea

1977-79 Trans Am Intake Manifold PlugsThese are reproduction intake manifold plugs for 1977-79 Trans Am with 403ci Oldsmobile engine.TA4029 1977-79 4 piece ..................... 8.99 set

1977-79 Trans Am Engine Lift BracketReproduction engine lift bracket installed on the assembly line on the 403ci engine of all 1977-79 Trans Am models to help maneuver the engine into position while building the car.TA4030 1977-79 ................................ 16.99 ea

1967-77 Vacuum PlugsVacuum plugs for 1967-77 Pontiac models. Available in 3/16" and 1/8".TA4063 1967-77 4 piece 3/16" ......... 3.99 set TA4064 1967-77 4 piece 1/8" ........... 3.99 set

1967-81 Firebird Vacuum Check ValveReproduction vacuum check valve for 1967-81 Firebird and Trans Am models equipped with AC. Check valve mounts on the vacuum tree on the intake manifold.TA4067 1967-81 .................................. 13.99 ea

1976 Intake Vacuum Hose SetThis vacuum hose set fi ts all Pontiac V8 engines with a 4 barrel carburetor and includes all the hoses for the intake and the carburetor. They are precut to the proper length and color striped as original.PYE76 1976 .......................................... 94.99 set

1978-97 Intake Manifold Bolt SetThese bolts have a Pontiac Arrowhead logo stamped directly onto the head of the them. Available in decorative chrome-plated or polished stainless steel versions.Chrome56469CA 1978-87 Chevy small block 25.99 set 56402CA 1993-97 LT-1 engine ........... 26.99 set Stainless Steel56469SA 1978-87 Chevy small block 14.99 set 56402SA 1993-97 LT-1 engine ........... 17.99 set

1968-81 Valley Pan PCV GrommetThe valley pan PCV grommet for 1968-81 Pontiac engines was discontinued by GM long ago. Aftermarket grommets were often incorrectly sized and made from the wrong type of rubber. This new reproduction is available in the correct size and the correct rubber that won’t disintegrate, soften, or swell. A8700195 1968-81 ............................... 4.99 ea

1967-79 Valley Pan BoltsThese bolts secure the valley pan to the engine block on 1967-79 Pontiac engines. Bolts feature the correct head markings and colors. Sets include fl at washers. A8700196 1967-79 ............................... 9.99 set

1970-72 Ram Air IV and HO Intake Bolt SetCorrect bolt set for aluminum intake manifolds installed on 1970-72 Pontiac RA IV and HO models. This set contains the correct style hardware with factory markings for mounting the intake manifold the cast iron crossover tube. A8700188 1970-72 .............................. 44.99 set

1969-70 RA IV and HO Crossover BoltsThese bolts replace missing or damaged crossover bolts on 1969-70 RA IV and HO Pontiac engines. Bolt sets come complete with the correct markings on the bolts and the correct 1/4" thick washers. A8700189 1969-70 ............................. 19.99 set

1970-79 Intake Manifold Bolt SetThis manifold bolt set contains the correct bolts, nuts and washers to mount the manifold and accessory brackets on 1970-79 Pontiac engines. All bolts feature correct factory style markings. A8700190 manifold bolt set .................. 29.99 set A8700191 studded manifold bolt w/nut 4.99 ea

A8700190

1968-71 Manifold Vacuum Switch HosesThese manifold vacuum switch hose sets are designed for ported vacuum emissions systems. These hoses feature correct colored stripe markings to provide an authentic replacement for worn or missing hoses. Includes installation instructions. A8700100 1968 4 barrel V8 AT/MT 120.99 set A8700101 1969 HO V8 AT/MT ...... 89.99 set A8700101 1971 HO V8 AT/MT ...... 89.99 set

A8100100

1968-71 Thermostatic Vacuum SwitchReproduction thermostatic vacuum switch for various 1968-71 Firebird models with ported vacuum emissions system. This switch opens and closes vacuum ports at specifi c coolant temperatures to control the distributor’s vacuum advance and retard systems and controls the vacuum operated shift modulator on some automatic transmission models.5 Port Vacuum Switch PY375 1968 AT/MT 4 barrel ...... 64.99 ea PY375 1969 AT ........................... 64.99 ea PY375 1971 AT/MT HO ............. 64.99 ea 3 Port Vacuum Switch PY376 1969 switch MT ............... 61.99 ea

PY376PY375

Intake Manifold Components

1969 Ram Air IV Intake Manifold Bolt SetFactory correct Firebird Ram Air IV intake manifold stud/nut set. Ram Air vehicles with the aluminum intake and the cast iron crossover used large washer and fl at head bolt to bolt the crossover in.1253534 1969 Ram Air IV ........... 29.99 set

1977-79 Trans Am Intake Manifold BoltsReproduction intake manifold bolt set for 1977-79 Trans Am models with 403ci Oldsmobile V8 engine. This 24 piece set will mount your intake as original.TA4015 1977-79 24 piece .............. 44.99 set

1253524 1253519

KK

En

gin

es &

Co

mp

on

en

ts

485WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

1967-79 Pontiac V8 Performer RPM HeadsPatterned after the 1969-70 Ram Air IV Pontiac cylinder head. Produces outstanding horsepower with excellent low speed torque and throttle response. 87cc combustion chambers are designed to maximize performance with low octane fuel and streetable compression ratios. The 72cc version is for higher compression engines. 5/8" deck for durability and head gasket retention.Important: Bolt set #E8556 fi ts Edelbrock heads manufactured before 3/15/02, #E8549 fi ts Edelbrock heads manufactured after 3/15/02.*50 state legal (E.O. #D-215-33)Note: Shipped overweight. E60579* 1967-79 389-455, 87cc ..................................................... 2139.99 pr E60599 1967-79 389-455, 72cc ..................................................... 2139.99 pr E8556 1967-79 Pontiac head bolt set (for Edelbrock heads only) 147.99 set E8549 1967-79 Pontiac head bolt set (for Edelbrock heads only) 163.99 set

1967-79 Oldsmobile V8 Performer RPM HeadsDesigned for non-emission high-performance Olds V8. The 77cc combustion chambers increase the quench area for a more effi cient burn, outstanding horsepower, and torque. Heads are assembled with stainless steel valves, hardened ductile iron valve seats, phosphor bronze guides. The valvetrain has been upgraded from the factory pedestal mount system to an ARP 7/16" screw in stud and 3/8" guide plates for increased valvetrain stability. High velocity, factory location ports feature 188cc intake ports and 106cc raised fl oor exhaust ports for more fl ow. Requires Edelbrock E7111 intake manifold. Port matching required.Important: Aftermarket 7/16" stud rocker arms and 3/8" hardened pushrods are required.Note: Shipped overweight.

E60519 1967-79 350-403, 77cc ..................................................... 1939.99 pr E8558 1967-79 Oldsmobile head bolt set (Edelbrock heads only) 159.99 set

1967-79 Performer Heads with D-Port ExhaustDesigned for 1967-79 389, 400, 421, 428 and 455 cid V8 Pontiac engines with a 4.060" or larger bore. Available in three dual quench combustion chamber sizes, including 65cc, 72cc, and 87cc; the 72cc combustion chambers provide a 9.5:1 compression ratio when used in conjunction with fl at top pistons. Features: 2.11" intake and 1.66" Exhaust valve sizes, 1.77" valve will fi t in the exhaust seat insert. Fully CNC Ported 72cc or 87cc Combustion Chamber, or “As Cast” 65cc Chamber. Heads sold individually.Important: These heads are for 4.060" and larger bore sizes; 350 cid engine may require notching the block for valve clearance. Three head bolt bosses are raised higher than the standard D-port heights and will require head bolt set #E8561 to install these heads. Note: Shipped overweight. E61599 1967-79 72cc complete head ........................................... 1219.99 ea E61579 1967-79 87cc complete head ........................................... 1219.99 ea E8561 1967-79 Pontiac head bolt set (for Edelbrock heads only) 154.99 set

E61599

E60519

60859

1977-86 Small Block Performer HeadsDesigned for 1977-86 small block Chevys, these heads have the same powerful design and combustion chambers as the straight plug Performer RPM heads plus an exhaust crossover passage for emissions equipment compatibility. These are 50 state street legal heads. Performer heads with 64cc combustion chambers improve performance and retain stock compression ratio on 1970 and earlier small blocks. Hardened pushrods required. Important: When using hot air choke carburetors and Performer manifolds with these heads, choke set E1932 is required. When using stock rockers on these heads .100" longer pushrods are required. These heads may not be used on engines with less than 4" bore except with cams having less than .450" valve lift. Note: Shipped overweight.

60759 1977-86 70cc chambers ................................................ 849.99 ea E60759 1977-86 70cc chambers ................................................ 1699.99 pr 60909 1977-86 64cc chambers ................................................ 829.99 ea E60909 1977-86 64cc chambers ................................................ 1659.99 pr E1932 1977-86 choke set ......................................................... 100.99 set E8550 1977-86 sb head bolt set (for Edelbrock heads only) ... 150.99 set

1987-95 SB Performer Centerbolt Heads Designed for 1987-95 5.7L Chevy engines (except LT-1, LT-4, and LT-5) originally equipped with center bolt valve covers and the 1987 and later intake manifold bolt pattern. The high velocity intake runner is designed to work with either T.B.I. or T.P.I. systems. The 60cc combustion chambers maintain stock compression ratio when used with the recommended gaskets. These are 50 state street legal heads. Hardened pushrods required Available in straight plug confi guration only. Important: When using stock rockers on these heads .100" longer pushrods are required. These heads may not be used on engines with less than 4" bore except with cams having less than .450" valve lift. Note: Shipped overweight. 60859 1987-95 60cc chambers ................................................. 829.99 ea E60859 1987-95 60cc chambers ................................................. 1659.99 pr E8550 1987-95 sb head bolt set (for Edelbrock heads only) .... 150.99 set

1977-86 SB Performer RPM Head Designed for non-emissions 1977-86 small block Chevys. Performer RPM heads with 64cc combustion chambers improve performance and retain stock compression ratio on 1970 and earlier small blocks. Available in straight plug confi guration to clear all types of exhaust headers or in angled plug confi guration. Hardened pushrods required. Important: When using stock rockers on these heads .100" longer pushrods are required. These heads may not be used on engines with less than 4" bore except with cams having less than .450" valve lift.Note: Shipped overweight. 60739 1977-86 70cc chambers/straight plugs ......................... 829.99 ea E60739 1977-86 70cc chambers/straight plugs ......................... 1659.99 pr 60899 1977-86 64cc chambers/straight plugs ......................... 719.99 ea E60899 1977-86 64cc chambers/straight plugs ......................... 1439.99 pr 60719 1977-86 70cc chambers/angled plugs ........................... 801.99 eaE60719 1977-86 70cc chambers/angled plugs ........................... 1499.99 pr60999 1977-86 64cc chambers/angled plugs ........................... 829.99 ea E60999 1977-86 64cc chambers/angled plugs ........................... 1659.99 pr E8550 1977-86 sb head bolt set (for Edelbrock heads only) ..... 150.99 set

E60759

E60719

E60579

Cylinder Heads

Cylinder Heads

En

gin

es &

Co

mp

on

en

ts

486

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.govComp Cams®

Mild Street™ 301-400ciIdeal for 301-400ci small block engines that require good low speed torque. A great “all around” cam for the daily driver. This is the best cam for the 301ci engine. Works with most stock valvetrain components. OK to use in applications with overdrive transmissions and high gear ratios. Operating range between 800 to 4800 RPM. Features: .425 valve lift, 252 degree duration.Camshaft Only222060A ............................................ 162.99 ea

Cam and Lifters – includes camshaft, lifters, instructions, and decals.222060B ............................................ 212.99 set

Small Set – includes camshaft, lifters, timing chain and gear set, instructions, assembly lube, and decals.222060C ............................................ 275.99 set

Full Set – includes camshaft, lifters, chain set, valve springs, valve spring retainers, valve locks, valve stem seals, assembly lube, instructions, and decals.222060D ............................................ 376.99 set

Highway Hauler™ 455ciThis cam provides exceptional power and a gas mileage increase, especially on the highway. Good idle and strong mid-range torque coupled with an excellent throttle response make this cam a good choice for the highway driven 455. Good power for the 326-400 as well. Operating range between 1200 to 5200 RPM. Features: .440 valve lift, 260 degree duration.Camshaft Only222061A ............................................ 162.99 ea

Cam and Lifters – includes camshaft, lifters, instructions, and decals.222061B ............................................ 243.99 set

Small Set – includes camshaft, lifters, timing chain and gear set, instructions, assembly lube, and decals.222061C ............................................ 247.99 set

Full Set – includes camshaft, lifters, chain set, valve springs, valve spring retainers, valve locks, valve stem seals, assembly lube, instructions, and decals.222061D ............................................ 431.99 set

Hot Street™ PerformanceOur most versatile cam, it is a great high-performance cam for 326-455ci engine. With its noticeable idle and great all around power, it is ideal for daily driven performance vehicles. Provides major power increases with stock converter. Operating range between 1500 to 5500 RPM. Features: .454 valve lift, 268 degree duration.Camshaft Only222062A ............................................ 157.99 ea

Cam and Lifters – includes camshaft, lifters, instructions, and decals.222062B ............................................ 227.99 set

Small Set – includes camshaft, lifters, timing chain and gear set, instructions, assembly lube, and decals.222062C ............................................ 261.99 set

Full Set – includes camshaft, lifters, chain set, valve springs, valve spring retainers, valve locks, valve stem seals, assembly lube, instructions, and decals.222062D ............................................ 387.99 set

The Magnum™ cam is a great cam for high-performance driving in street machines. Provides 30-70% more horsepower and a rough and ready to rumble idle. This is the largest cam you can use with a stock torque converter. The Magnum™ will not affect power accessories, but should be used with headers and a 4 barrel carburetor. This is the perfect cam for cruising. In order to protect your camshaft warranty and for maximum performance

Camshaft Only222063A ......................................................................................... 160.99 ea

Cam and Lifters – includes camshaft, lifters, instructions, and decals.222063B ......................................................................................... 243.99 set

Magnum™ Cams for Your High-Performance Driven Street Machine!benefi t, we recommend replacing lifters with a matched set manufactured by COMP CAMS®. Important: Valve springs must be replaced with the set recommended for the cam. The use of stock or incorrect springs could cause severe engine damage!Note: Magnum™ cams are legal only for off highway use (except in California or states that have adopted California emission standards), racing use or for use on pre-emission controlled motor vehicles/motor vehicle engines (pre-1966 domestic vehicles certifi ed to California standards, pre-1968 domestic vehicles certifi ed to federal standards).*May require machining of cylinder heads.

Pro Street™ PontiacMagnum™ cams are specifi cally designed for the street enthusiast looking for more power with that Pro Street sound. For 326-455ci engines. Hydraulic fl at tappet cam has an operating range of between 1800 to 5800 RPM. For use with lower gear ratios. Provides a mild rough idle and good mid range torque. Features .470 valve lift, 270 degree duration.

Small Set – includes camshaft, lifters, timing chain and gear set, instructions, assembly lube, and decals.222063C ......................................................................................... 259.99 set

Full Set – includes camshaft, lifters, chain set, valve springs, valve spring retainers, valve locks, valve stem seals, assembly lube, instructions, and decals.222063D* ......................................................................................... 500.99 set

High Energy™ Cams for Your Daily Driver!All High Energy™ designs are totally streetable cams. They will produce 10 to 30% more power than a stock cam throughout the RPM range. Each cam has a particular RPM range in which it works best. By selecting the cam that best suits your driving needs, exceptional power increases can be expected.High Energy™ Cams work great for everyday driving without the “bad” side effects normally found with other cams. High Energy™ cams produce more power, are more effi cient, and do not affect the engine’s idle characteristics to the point of making your car undriveable.High Energy™ Cams will not affect any vacuum or power accessories such as power brakes, air conditioning or steering. Important: Mild Street™ and Highway Hauler™ cams may be used with stock valve springs and lifters. However, these components must be in good operating condition. In order to prevent engine damage, the Hot Street Performance™ cam must be used with matching set of valve springs from COMP CAMS®. In order to protect your camshaft warranty and for maximum performance benefi t, we recommend replacing stock valve springs and lifters with a matched set manufactured by COMP CAMS®.Note: High Energy™ cams are legal only for off highway use (except in California or states that have adopted California emission standards), racing use or for use on pre-emission controlled motor vehicles/motor vehicle engines (pre-1966 domestic vehicles certifi ed to California standards, pre-1968 domestic vehicles certifi ed to federal standards).

full set

Comp Cams for Pontiac Engines

KK

En

gin

es &

Co

mp

on

en

ts

487WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Xtreme Energy™ cams are COMP CAMS® newest series of hydraulic cams. They are designed to take advantage of the latest improvements in valve train components and the newest developments in camshaft design. Xtreme Cams can be used in any street or street/strip application where both throttle response and top end horsepower are desired. Increases horsepower from 20-70% over stock.Important: Because these cams use aggressive lobe designs, it is imperative that valve springs, valve locks, retainers, pushrods, lifters, rockers and other related components are matched to the camshaft. We do not recommend the use of stock valvetrain components with Xtreme Energy™ cams.Note: Xtreme Energy™ cams are legal only for off highway use (except in California or states that have adopted California emission standards), racing use or for use on pre-emission controlled motor vehicles/motor vehicle engines (pre-1966 domestic vehicles certifi ed to California standards, pre-1968 domestic vehicles certifi ed to federal standards).

Comp Cams®

Street/Strip™ PontiacXtreme Energy™ cams can be used in any street or strip application where both throttle response and top end horsepower are desired. For 326-455ci engines. Hydraulic fl at tappet cam has an operating range of between 1300 to 5500 RPM. Good mid-range with noticeable idle. Features: .462 intake valve lift, .470 exhaust valve lift, 262 degree intake duration, 270 degree exhaust duration.Camshaft Only222064A ........................................................................................................................................ 148.99 ea

Cam and Lifters – includes camshaft, lifters, instructions, and decals.222064B ........................................................................................................................................ 243.99 set

Small Set – includes camshaft, lifters, timing chain and gear set, instructions, assembly lube, and decals.222064C ........................................................................................................................................ 283.99 set

Full Set – includes camshaft, lifters, chain set, valve springs, valve spring retainers, valve locks, valve stem seals, assembly lube, instructions, and decals.222064D ........................................................................................................................................ 401.99 set

Xtreme Street/Strip™ PontiacXtreme Energy™ cams can be used in any street or strip application where both throttle response and top end horsepower are desired. For 326-455ci engines. Hydraulic fl at tappet cam has an operating range of between 1600 to 5800 RPM. Great cam for street machines. Largest cam for stock torque converter. Features: .477 intake valve lift, .480 exhaust valve lift, 268 degree intake duration, 280 degree exhaust duration.Camshaft Only222065A ........................................................................................................................................ 162.99 ea

Cam and Lifters – includes camshaft, lifters, instructions, and decals.222065B ........................................................................................................................................ 225.99 set

Small Set – includes camshaft, lifters, timing chain and gear set, instructions, assembly lube, and decals.222065C ........................................................................................................................................ 297.99 set

Full Set – includes camshaft, lifters, chain set, valve springs, valve spring retainers, valve locks, valve stem seals, assembly lube, instructions, and decals.222065D ........................................................................................................................................ 461.99 set

Factory Muscle!During the heyday of the factory muscle car, Pontiac produced what they thought would be the perfect muscle cars. Model/engine designations like Formula 400, Ram Air, and Trans Am represented the ultimate in trim and performance. But, Pontiac also knew that not everyone could afford one of these factory prepared monsters. Consequently, 80% of the muscle cars offered were equipped with more practical and economical power plants. You can give your stocker a dose of factory muscle with a Muscle Car™ cam from COMP CAMS®. Designed to replicate the Genuine GM cams of the era, The Muscle Car™ cams produce the power and performance your car missed out on.

Factory 400 or 455ciKnown to GM as part #9794041, this is COMP CAMS® version of the hydraulic cam that provided 366HP to the 400 in 1968. It was also used in the 400ci in 1969, providing 345/370HP and the 1970 455/370HP. Fits 326-455ci engines. Features: .516 lift with 230 degree intake and 240 degree exhaust duration. Important: Valve springs must be replaced with the set recommended for the cam. The use of stock or incorrect springs could cause severe engine damage! Note: Depending upon the cylinder heads that you are using, some minor machining may be necessary to fi t the dual valve springs and valve stem seals to the cylinder head.Camshaft Only222070A .......................................... 169.99 ea

Cam and Lifters – includes camshaft, lifters, instructions, and decals.222070B .......................................... 209.99 set

Small Set – includes camshaft, lifters, double roller timing chain and gear set, instructions, assembly lube, and decals.222070C .......................................... 243.99 kit

Full Set – includes camshaft, lifters, chain set, valve springs, valve spring retainers, valve locks, valve stem seals, assembly lube, instructions, and decals.222070D .......................................... 497.99 kit

small set

Xtreme Energy™ for Street or Strip!

En

gin

es &

Co

mp

on

en

ts

488

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Factory Muscle Cams Replicate Genuine GM Cams of the Era!Give your stocker a dose of factory muscle with a Muscle Car™ cam from COMP CAMS®. Designed to replicate the Genuine GM cams of the era, the Muscle Car Cams™ produce the power and performance your car missed out on. Each set includes: camshaft, lifters, assembly lube, instructions, and decals.300HP/350ci Factory Muscle Car Cam Known to GM as part #3896929, this is the hydraulic cam that provided 275/300HP to the 327 from 1965-68. It was also used from 1967-69 in the 350ci providing 295HP. Then in 1970, it was the cam used in the 300HP 350ci Super Sport.Item # Description GM Item # Adv. Dur. Lift Price222050B cam & lifters 3896929 195˚/202˚ .390"/.410" 209.99 set222050D full set 3896929 195˚/202˚ .390"/.410" 381.99 set300HP/327ci Factory Muscle Car Cam Referred to by GM as part #3863151, this is Comp Cams’ version of the hydraulic cam that provided 350HP to the 327 from 1965-68. Item # Description GM Item # Adv. Dur. Lift Price222051A camshaft 3863151 222˚ .447" 142.99 ea 222051B cam & lifters 3863151 222˚ .447" 205.99 set222051D full set 3863151 222˚ .447" 381.99 setZ28 Solid Lifter Factory Muscle Car Cam This is the solid lifter cam that GM installed in the 1967-69 Z28 Camaro’s 302, providing it with 290HP. In 1964-65, it provided the Corvette 327 with 365-375 HP.Item # Description GM Item # Adv. Dur. Lift Price222052A camshaft 3849346 254˚ .485" 143.99 ea 222052B cam & lifters 3849346 254˚ .485" 224.99 set222052D full set 3849346 254˚ .485" 410.99 set

Comp Cams®

High Energy™ Cams for Your Daily Driver!Cams for Your Daily Driver!

222002 305-35ci 800-4800 252˚/252˚ .425" 129.99 ea 191.99 set 245.99 set 350.99 set 222003 305-350ci 1200-5200 260˚/260˚ .440" 128.99 ea 204.99 set 246.99 set 320.99 set 222004 305-350ci 1500-5500 268˚/268˚ .454" 129.99 ea 189.99 set 246.99 set 356.99 set

Your Choice of Four Convenient Sets to Meet Your Small Block Chevrolet Engine Needs!

All High Energy™ designs are totally streetable cams. They will produce 10 to 30% more power than a stock cam throughout the RPM range. Each cam has a particular RPM range in which it works best. By selecting the cam that best suits your driving needs, exceptional power increases can be expected. High Energy™ Cams work great for everyday driving without the “bad” side effects normally found with other

cams. High Energy™ cams produce more power, are more effi cient, and do not affect the engine’s idle characteristics to the point of making your car undriveable. High Energy™ Cams will not affect any vacuum or power accessories such as power brakes, air conditioning or steering.

Important: On Chevrolet small block applications, High Energy™ Cams may be used with stock valve springs and lifters. However, these components must be in good operating condition. In

order to protect your camshaft warranty and for maximum performance benefi t, we recommend replacing stock valve springs and lifters with a high-performance set from Classic Industries®.

A – Camshaft OnlyThe camshaft only set includes camshaft, instructions, assembly lube, and decals.

B – Cam and LiftersOrder the cam and lifter set to add a

matched set of lifters to your camshaft.

C – Small SetOrder the small set for cam and

lifter set plus timing chain and gear.

D – Full SetSet includes: cam, lifters, timing chain and gear valve springs and retainers,

valve locks, valve stem seals.

CAMS for Your High-Performance Street Machine!The Magnum™ Cam is a great cam for high-performance driving in street machines. Provides 30-70% more horsepower and a rough and ready to rumble idle in small block Chevy applications. The Magnum™ will not affect power accessories, but should be used with headers. This is the perfect cam for cruising.

Xtreme Energy™ Cams are Comp Cams® newest series of hydraulic cams. They are designed to take advantage of the latest improvements in valve train components and the newest developments in camshaft design. Xtreme Cams can be used in any street or street/strip application where both throttle response and top end horsepower are desired. Increases horsepower from 20-70% over stock.

Full Set – includes camshaft, lifters, chain set, valve springs, valve spring retainers, valve locks, valve stem seals, assembly lube, instructions, and decals.

Magnum™ CamsItem # Application RPM Range Adv. Dur. Lift Price222005D 305-350ci 1800-5800 270˚/270˚ .470" 363.99 set

Xtreme Energy™ CamsItem # Application RPM Range Adv. Dur. Lift Price222006D 305.350ci 1300-5600 262˚/270˚ .462"/.469" 371.99 set 222007D 305-350ci 1600-5800 268˚/280˚ .477"/.480" 359.99 set

Item # Application RPM Range Adv. Dur. Lift A – Camshaft B – Cam & Lifters C – Small Set D – Full Set

KK

En

gin

es &

Co

mp

on

en

ts

489WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov Comp Cams®

For Computer Controlled Engines!If you have a late model computer controlled engine, you have to be VERY CAREFUL when selecting a high-performance aftermarket cam! The wrong cam could “throw off” the computer, spelling real trouble for your vehicle’s driveability and performance.

Comp Cams® has engineered this line of camshafts specifi cally for these engines, ensuring that you get a camshaft that works WITH your computer, providing exceptional performance and driveability out of your late model Chevy engine!

CAMS for Your TBI/Crossfi re or Carbureted Late Model!Designed for use with throttle body, or crossfi re injected and carbureted 305ci engines. Your choice of 3 sets to suit your specifi c needs, Camshaft only, cam and lifters or full set. The full set includes: camshaft, lifters, chain set, valve springs, valve spring retainers, valve locks, valve stem seals, assembly lube, instructions, and decals.Item # Description RPM Range Adv. Dur. Lift Price222008A camshaft 1000-5000 252˚/260˚ .425"/.440" 150.99 ea 222008B cam & lifters 1000-5000 252˚/260˚ .425"/.440" 232.99 set 222008D full set 1000-5000 252˚/260˚ .425"/.440" 410.99 set

CAMS for Your 1987-98 Tuned Port Injection Engine!Designed for use with TPI 305, 350ci engines (Except LT1 and LT4), This cam is designed for 1987-98 engines originally equipped with hydraulic roller camshaft. Your choice of 3 sets to suit your specifi c needs, Camshaft only, cam and lifters or full set. The full set includes: camshaft, lifters, chain set, valve springs, valve spring retainers, valve locks, valve stem seals, assembly lube, instructions, and

decals. Applications are available for use with stock computer or modifi ed computer.Important: This cam will not work with stock valve train components. To retain your camshaft warranty and prevent damage to your engine, you must replace the stock components with a matched set from COMP CAMS®.

STOCK COMPUTERItem # Description RPM Range Adv. Dur. Lift Price222009A camshaft 1000-5000 262˚/264˚ .450"/.480" 315.99 ea 222009B cam & lifters 1000-5000 262˚/264˚ .450"/.480" 522.99 set 222009D full set 1000-5000 262˚/264˚ .450"/.480" 785.99 set

MODIFIED COMPUTERItem # Description RPM Range Adv. Dur. Lift Price222010A camshaft 1200-5200 264˚/274˚ .480"/.480" 289.99 ea 222010B cam & lifters 1200-5200 264˚/274˚ .480"/.480" 496.99 set 222010D complete set 1200-5200 264˚/274˚ .480"/.480" 759.99 set

Cam and LiftersOrder the cam and lifter set to add a

matched set of lifters to your camshaft.

Camshaft OnlyThe camshaft only set includes camshaft instructions, assembly lube, and decals.

Full SetSet includes: cam, lifters, timing chain and gear valve springs and retainers,

valve locks, valve stem seals.

Performer Plus Camshaft SetDesigned for optimum torque from the low end to the mid-range, Performer® Plus camshaft packages match with Performer® manifolds for vehicles operating from idle to 5500 RPM. All camshafts come with hydraulic lifters, assembly lube and instructions. Most Performer® cams are 50 state street legal.

Performer Plus Sets for Chevrolet EnginesItem # Year Application Duration Lift PriceE3702* 1987-95 305/350 TBI 194˚/214˚ .398"/.442" 210.99 set E2102* 1977-86 305-350 204˚/214˚ .420"/.442" 191.99 set Note: *These cams are 50 state legal.

Performer Plus Sets for Pontiac EnginesItem # Year Application Duration Lift PriceE2157 1965-79 326-455 204º/214º .420"/.422" 305.99 set

Performer Plus Sets for Oldsmobile EnginesItem # Year Application Duration Lift PriceE3712 1967-84 350/403 204º/214º .448"/.472" 325.99 set

Performer RPM Camshaft SetDesigned for street high-performance applications, Performer RPM cams provide power from 1500 to 6500 RPM. These hydraulic lifter camshafts are dyno-matched to Performer RPM manifolds for high RPM horsepower while maintaining acceptable low end torque. With 10-12 inches of manifold vacuum at idle, Performer® RPM cams have more lift and duration than most street camshafts.

Performer RPM Kits for Chevrolet EnginesItem # Year Application Duration Lift PriceE7102 1977-86 305-350 234˚/244˚ .488"/.510" 258.99 ea

Performer RPM Set for Pontiac EnginesItem # Year Application Duration Lift PriceE7157 1965-79 326-455 231º/240º .470"/.470" 305.99 set

Performer RPM Set for Oldsmobile EnginesItem # Year Application Duration Lift PriceE7112 1967-84 350/403 224º/234º .496"/.520" 325.99 set

Rollin’ Thunder Performer Plus Chevrolet CamshaftDesigned for street high-performance applications, Performer Plus cams provide power from off idle to 5500 RPM. These hydraulic roller lifter camshafts reduce friction, virtually eliminate break-in problems and permit higher valve velocities for increased performance. Intended for use with OEM or Edelbrock hydraulic roller lifters sold separately.Rollin’ Thunder Performer Plus Camshafts Item # Year Application Duration Lift PriceE2208 1977-86 305-350 212˚/222˚ .462"/.479" 397.99 ea E2209 1987-99 305-350 212˚/222˚ .462"/.479" 384.99 ea

Rollin’ Thunder Performer RPM Chevrolet CamshaftDesigned for street high-performance applications, Performer RPM cams provide power from 1500 to 6500 RPM. These hydraulic roller lifter camshafts reduce friction, virtually eliminate break-in problems and permit higher valve velocities for increased performance. Intended for use with OEM or Edelbrock hydraulic roller lifters sold separately.Note: *Non-LT1, Non-GEN III. **Wide center EFI.Rollin’ Thunder Performer RPM Camshafts Item # Year Application Duration Lift PriceE2201 1977-86 305-350 234˚/238˚ .539"/.548" 322.99 ea E2210 1977-86 305-350** 234˚/238˚ .539"/.548" 330.99 ea E2204 1987-99 305-350* 234˚/238˚ .539"/.548" 305.99 ea E2205 1987-99 305-350** 234˚/238˚ .539"/.548" 362.99 ea

E2208

En

gin

es &

Co

mp

on

en

ts

490

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.govEngine Components

Small Block PushrodsHeat treated 5/16" diameter push rods with welded ball ends for small block Chevrolet applications through 1986. Includes 16 pushrods in a clamshell package.66890C stock length ............................ 29.99 set 66889C +.100" .................................... 30.99 set

Aluminum Stud GirdlesAluminum stud girdles are designed to reduce fl exing of the rocker arm studs and help reduce part breakage under high stress. Increased valvetrain rigidity helps minimize energy loss. For use on small block Chevy engines through 1986 with full roller rockers. Includes: 2 girdles and 16 specially designed poly locks.66950 for 3/8" studs .......................... 119.99 set 66951 for 7/16" studs ........................ 112.99 set

Poly Locks for Roller RockersPoly locks are designed for use specifi cally with full roller rockers featuring a set screw locking device to ensure they remain secure. Set of 16.66935 for 3/8" studs ............................ 23.99 set 66936 for 7/16" studs .......................... 25.99 set

Chevy Engine Components

1977-95 Engine and Accessory FastenersIt’s easy to assemble a show quality engine when you use ARP’s handy engine and accessory fastener set. Virtually everything you need comes organized in one convenient package! More importantly, each and every fastener is superior in strength to the OEM bolts. Choose from heat treated 8740 chromoly steel with black oxide fi nish or corrosion resistant polished stainless steel. Both materials are rated at 170,000 psi tensile strength and come in both Hex and 12 point heads. Note: Sets are designed for carbureted engines. 1987 and newer EFI applications may require the purchase of additional fasteners. Each set contains 12 groups of fasteners.1977-86 Chevrolet Small BlockAR5981 black oxide Hex head ......... 101.99 set AR5971 black oxide 12 point ........... 97.99 set AR5961 stainless Hex head ......... 124.99 set AR5951 stainless 12 point ........... 146.99 set 1987-95 Chevrolet SB w/Headers exc. LS1 & LS6 AR5982 black oxide Hex head ......... 127.99 set AR5972 black oxide 12 point ........... 139.99 set AR5962 stainless Hex head ......... 190.99 set AR5952 stainless 12 point ........... 204.99 set Chevrolet Small Block LT1/LT4 with Headers AR5983 black oxide Hex head ......... 145.99 set AR5973 black oxide 12 point ........... 151.99 set AR5963 stainless Hex head ......... 227.99 set AR5953 stainless 12 point ........... 231.99 set 1996-02 Vortec with Headers exc. LS1 and LS6AR5984 black oxide Hex head ......... 126.99 set AR5974 black oxide 12 point ........... 140.99 set AR5964 stainless Hex head ......... 192.99 set AR5954 stainless 12 point ........... 203.99 set Pontiac 350-400-455AR5998 black oxide Hex head ......... 122.99 set AR5997 black oxide 12 point ........... 122.99 set AR5996 stainless Hex head ......... 140.99 set AR5995 stainless 12 point ........... 145.99 set

Aluminum Roller RockersThe needle bearing fulcrum and roller tip design unleashes power while lengthening valvetrain life and reducing valve stem tip wear. Small block sets are available for engines with stock 1.5:1 ratio arms, or performance enhancing 1.6:1 arms. For small blocks through 1986, a combination of eight 1.5:1 arms and eight 1.6:1 arms is available to allow greater air fl ow on either the intake or exhaust ports. Sets include 16 rockers with poly locks. Note: *1987 and later. Check pushrod clearance and alignment, spring coil bind, piston to valve clearance and valve timing when modifying the valvetrain.Early Small Block Sets for 3/8" Stud66907C 1.5:1 ................................... 158.99 set 66908C 1.6:1 ................................... 156.99 set 66920C 1.5:1/1.6:1 .......................... 188.99 set Early Small Block Sets for 7/16" Stud66909C 1.5:1 ................................... 167.99 set Late Small Block Sets for 3/8" Stud66914C* 1.5:1 ................................... 207.99 set 66915C* 1.6:1 ................................... 220.99 set

Early HD Roller RockersSet of 16 full roller rockers designed for up to 10,000 RPM. This heavy-duty design features an oversized body and fulcrum with a triangulated profi le for additional rigidity and strength. Will accommodate most oversized valve springs. American made roller bearings are in self-contained bearing cups for extra low friction wear. Available in the stock 1.5:1 pivot ratio, or, 1.6:1 ratio for increased horsepower and torque. Fits small blocks through 1986 with 3/8" or 7/16" rocker studs.Note: Check for pushrod clearance and alignment, spring coil bind, piston to valve clearance and valve timing when modifying the valvetrain to exceed factory specs.Small Block Sets for 3/8" Stud66928C 1.5:1 ................................... 184.99 set 66929C 1.6:1 ................................... 199.99 set Small Block Sets for 7/16" Stud66930C 1.5:1 ................................... 199.99 set 66931C 1.6:1 ................................... 202.99 set

Replacement LifterThese lifters will fi t 1977-92 small block Chevrolet engines and are offered in your choice of hydraulic or mechanical depending on your particular application. TVL817 hydraulic ................................ 4.99 ea TVL43 mechanical ............................. 6.99 ea

AR5981

AR134371

Lifter Valley Oil Baffl eThis aluminum lifter valley baffl e simply snaps into place in the lifter valley, shielding the bottom of the intake manifold from hot oil to keep incoming air cool and dense. It also keeps excess oil out of the valve covers and holds lifters in their bores in case of pushrod or rocker arm failure.Note: Due to minor variations in block castings minor trimming may be required. Not for use with roller lifters. 225050 small block Chevy baffl e ..... 43.99 ea 225100 big block Chevy baffl e ......... 43.99 ea

225050

Valvetrain Oil Defl ectorUse this lightweight aluminum defl ector to redirect oil from your small block Chevy pushrods directly to the rocker arm fulcrum balls for better lubrication, less wear and longer valvetrain life. Mounts easily to stock rocker arm studs with the supplied hardware. Sold in pairs.Note: Installation requires poly locks and tall valve covers.267700 small block oil defl ectors ......... 35.99 pr

TVL817

66935

Head BoltsHigh-performance head bolts are available with a reduced wrenching Hex or 12 point and wide area fl anged head retorquing. All high-performance series bolts are 180,000 psi (which is 15% stronger than Grade 8) and sets include hardened parallel ground washers.

Hex Cast Iron Head BoltsChevy Small BlockAR134361 23 degree ............................ 81.99 set

12 Point Cast Iron Head BoltsChevy Small BlockAR134371 23 degree ............................ 93.99 set

Each Set Contains 12 Groups of Fasteners:

• intake manifold bolts• valve cover bolts• thermostat housing bolts• alternator bracket bolts• distributor bracket bolts• motor mount bolts

• oil pan bolts• coil bracket bolts• header bolts• front cover bolts• water pump bolts• fuel pump bolts.

KK

En

gin

es &

Co

mp

on

en

ts

491WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov Engine Hardware

Gasket MakerMakes reliable formed in place gaskets that resist cracking, shrinking and migrating. Coats precut gaskets to increase reliability. Resists auto and shop fl uids. Great for use on valve covers, intake manifold end seals, timing covers, water pumps, and thermostat housings. 3 oz. tube.S80022 blue #6B ................................ 3.99 ea S81160 red #26B ................................ 4.99 ea S81878 copper #101B ........................ 5.99 ea S80016 black #2B .............................. 3.99 ea

Performance Head Gaskets for Chevrolet Engines

Mr. Gasket head gaskets are one of the most advanced, tested and proven in the performance market today and earned the respect of many professional engine builders. A variety of gasket materials are available to meet your specifi c needs.

73144

Mr. Gasket Ultra-SealThe Ultra-Seal head gasket has a fi ve layer composite construction and is coated with high temperature silicone to ensure seal of engine fl uids. It’s graphite core has excellent thermo-conductivity; transfers heat away from hot spots in head to coolant passages, preventing gasket burn out. The Ultra-Seal head gasket provides excellent stability, compressibility, high temperature endurance and will not Brinell (indent) aluminum cylinder heads..028" Comp. Thickness71134 1977-91 305-350, 4.130" bore ... 43.99 ea Mr. Gasket MLS (Multi-Layered Steel)

The MLS head gasket is manufactured from Viton rubber coated stainless steel layers and is stress formed embossments seal extreme cylinder pressure. The MLS head gasket provides excellent stability and reduces cylinder bore distortion. Ideal for supercharged, turbo charged, nitrous and extreme compression ratios..040" Comp. Thickness73130 1977-91 305-350, 4.060" bore ... 82.99 ea 73131 1977-91 305-350, 4.125" bore ... 82.99 ea 73132 1977-91 305-350, 4.165" bore ... 82.99 ea 73133 1977-91 305-350, 4.200" bore ... 80.99 ea 73140 1992-97 350 LT1, 4.040" bore ... 82.99 ea 73141 1992-97 350 LT1, 4.100" bore ... 82.99 ea .054" Comp. Thickness73146 1997-03 346 LS1, 4.125" bore ... 82.99 ea 73144 1997-03 346 LS1, 4.160" bore ... 82.99 ea

Mr. Gasket Steel ShimThe Steel Shim head gasket is manufactured from .020" steel shim stock and is stress formed embossments seal extreme cylinder pressure. Made thinner than OE head gasket, increases engine compression and coated with high temperature silicone to ensure seal of engine fl uids.Note: Do not use with lightweight 305 heads..020" Comp. Thickness71130 1977-91 305-350, 4.100" bore ... 24.99 ea

Mr. Gasket Copper (Dead Soft)The Copper head gasket is manufactured from dead soft solid copper. Provides excellent stability and reduces cylinder bore distortion and can be used with or without stainless steel o-rings. The Copper head gasket is ideal for supercharged, turbo charged, nitrous and extreme compression ratios.Note: Do not use with lightweight 305 heads..020" Comp. Thickness71052 1977-91 305-350, 4.140" bore ... 59.99 ea

Gaskets & Engine Hardware

Super Silicone SealantExcellent for use with all types of gaskets. A rapid curing adhesive/sealant can also be used as a sealant between fl anges, hose connectors, and similar close fi tting parts.08661 clear 3 oz. tube ................. 10.99 ea 08662 black 3 oz. tube ................. 10.99 ea

1977-79 Engine Block Locating PinsReproduction locating pins for the cylinder heads and timing cover for 1977-79 Trans Am models with Oldsmobile 403ci V8 engine.TA4011 1977-79 ................................... 8.99 set

1967-70 Pontiac Rocker Arm HardwareGenuine replacement rocker arm hardware for 1967-70 Firebird models.G9158 1969-70 w/Ram Air IV, 16 nuts req 1.99 ea G9239 1967-70 8 bolts required .............. 2.99 ea

1977-79 Trans Am Engine Block PlugsReproduction engine block plugs for 1977-79 Trans Am models with Oldsmobile 403ci V8 engine. 2 plugs feature the hole to squirt oil on the timing chain.TA4006 1977-79 4 piece ................. 14.99 set

1977-79 Trans Am Engine Freeze PlugsFreeze plugs for the 403ci Oldsmobile V8 engine fi tted in 1977-79 Trans Am models. This 8 piece set contains all necessary freeze plugs for a full replacement.TA4007 1977-79 8 piece ................ 16.99 set

1977-79 Trans Am Engine Block PlugsEngine block plugs for 1977-79 Trans Am models with 403ci Oldsmobile V8 engine. Sold as a 4 piece set.TA4008 1977-79 4 piece ................... 9.99 set

1968-75 Reproduction Head BoltsOriginal style Pontiac cylinder head bolts for 1968-75 Ram Air II, III, IV, 455 HO and Super Duty models. Each 20 piece set features correct markings and includes original specifi cation bolts, including accessory mount bolts with stud style heads. Available for round port and D-port cylinder heads. A8700129 1968-74 round port ...... 124.99 set A8700130 1969-75 D-port ............ 104.99 set

A8700129

Brass Freeze Plug SetAvoid the chance of rusted leaking freeze plugs with this brass freeze plug set. Intended for high corrosion marine applications, they are perfect for vehicles that sit for long periods and are a superior material for the every day driver. Available for small block Chevy engines. 64812 small block ............................... 27.99 set

G9158 G9239

Stamped Roller Rocker SetStamped steel rocker arms feature roller tips for reduced friction, and long slots for use with cams that have lift specs higher than stock for additional clearance at the rocker stud. Available in the stock 1.5:1 pivot ratio, or, a performance enhancing 1.6:1 ratio for increased horsepower and torque. Easy installation requiring no special tools and will fi t under stock valve covers. Fits small block Chevrolet engines through 1986 with 3/8" rocker studs. Set of 16 rockers with pivot balls and nuts. Note: Check for pushrod clearance and alignment, spring coil bind, piston to valve clearance and valve timing when modifying the valvetrain to exceed factory specs.66906C 1.5:1 ratio ............................ 89.99 set 66922C 1.6:1 ratio ............................ 113.99 set

66906C

08661

S80022 S81160 S81878

Chevrolet PerformanceCylinder Head Bolt – Small Block

These bolts are GM replacement bolts for both iron and aluminum heads. These high-quality bolts include a built-in washer and thread sealer on each one. Sold individually or in a set.G11421 7/16"-14 x 1-3/4" 16 req ......... 3.99 ea G68526 7/16"-14 x 3-1/16" 4 req ......... 3.99 ea G68525 7/16"-14 x 3-13/16" 14 req ..... 3.99 ea G95499 head bolt set ............................ 51.99 set

G68526 G95499

Stamped Rocker Arm SetStamped steel rocker arms featuring long slots for use with cams that have lift specs higher than stock for additional clearance at the rocker stud. Easy installation requiring no special tools and will fi t under stock valve covers. Fits small blocks through 1986 with stock 1.5:1 pivot ratio and 3/8" rocker studs. Set of 16 rockers with pivot balls and nuts, or, add a set of 16 stock length, high-performance 5/16" pushrods with welded ball ends and save. Note: Check for pushrod clearance and alignment, spring coil bind, piston to valve clearance and valve timing when modifying the valvetrain to exceed factory specs.1.5:1 Ratio for 3/8" Stud 66905 .............................................. 69.99 set 66923C with pushrods ....................... 97.99 set

66905

En

gin

es &

Co

mp

on

en

ts

492

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Oil Pumps and Components

Oil Pumps

1977-79 Trans Am Oil Filter Housing BoltsOil fi lter housing to engine block for 1977-79 Trans Am with 403ci Oldsmobile V8 engine. These bolts hold the oil fi lter housing to engine block and feature correct TR head markings. Sold as a 3 piece set.TA4028 1977-79 Olds 403 ............... 6.99 set

1977-02 Genuine Oil PumpReplace your small block Chevrolet oil pump with an Genuine GM replacement. Oil pumps that are not in proper working order can cause major problems including the possibility of seizing your engine.G6042 1977-92 small block ................ 160.99 ea G9408 1993-94 1st des.742 dia tube .. 159.99 ea G6042 1993-94 2nd des .620 dia tube 160.99 ea G9408 1995-97 LT1 ............................ 159.99 ea

G6042

10540

1967-02 High-Performance Oil PumpThese Melling Select oil pumps are heavy-duty cast pumps that feature steel billet gears for optimum performance. These pumps are available for Pontiac Firebirds from 1967-81 with 301-455 engines, 1993-97 models with LT1 engines and 1998-02 models with LS1 engines. These high-quality performance pumps are available with a higher than stock oil fl ow for use on higher horsepower or race motors.Note: *Includes pickup screen. 1967-81 – 301-45510540* high pressure ........................... 119.99 ea 1967-81 – 301-35510541* 30% higher pressure than 10540 117.99 ea 1993-97 – LT1-35010553 std volume ............................... 99.99 ea 10550 std volume + 25% over std vol. 101.99 ea 10551 25% higher volume, 3/4" inlet 102.99 ea 1998-02 – LS1-35010295 10% higher pressure than stock 132.99 ea 10296 18% higher volume than stock 177.99 ea

1977-79 Trans Am Oil Pressure LineEngine block to oil pressure sender oil pressure line for 1977-79 Trans Am models with an Oldsmobile 403 engine. Available in your choice of OEM or stainless steel material. TA4037 1977-79 OEM ................... 8.99 ea TA4038 1977-79 stainless steel ...... 10.99 ea

TA4037

1967-02 Oil Pressure Sending UnitAn oil pressure sending unit is an electrical or mechanical sensing device that sends information to the pressure gauge or light. Fits 1967-02 Firebird models.For Vehicles Originally Equipped w/Gauges

PS133 1967-81 all ............................. 34.99 ea WE140 1982 2.8-1 with 60 psi ..... 21.99 ea PS133 1982-84 2.8-1 with 80 psi ..... 34.99 ea PS133 1982-85 5.0-H with 80 psi ..... 34.99 ea WE140 1982-87 5.0-H with 60 psi ..... 21.99 ea PS327 1982-83 5.0-7 with 60 psi ..... 64.99 ea PS389 1982-83 2.5-F, 2.5L-2............ 54.99 ea PS327 1983 5.0-S with 60 psi ..... 64.99 ea PS327 1983-84 5.0-H with 60 psi ..... 64.99 ea PS327 1984 5.0-G with 60 psi ..... 64.99 ea PS133 1984-85 5.0-G with 80 psi ..... 34.99 ea WE140 1984-86 5.0-G with 60 psi ..... 21.99 ea PS133 1985 5.0-F with 80 psi ..... 34.99 ea PS133 1985-87 2.8-S with 80 psi ..... 34.99 ea WE140 1985-88 5.0-F with 60 psi ..... 21.99 ea PS223 1986 2.5-2 ......................... 63.99 ea WE140 1987-88 5.7-8 with 60 psi ..... 21.99 ea WE140 1988 5.0-E with 60 psi ..... 21.99 ea PS212 1988 2.3-S ........................ 24.99 ea PS168 1989 2.8, 3.8..................... 13.99 ea PS207 1989-92 5.0, 5.7, 1 prong ...... 17.99 ea PS168 1990-91 3.1, 1 prong ............. 13.99 ea PS220 1993-94 3.4-S, w/o ground .... 29.99 ea PS220 1993-94 5.7-P ........................ 29.99 ea PS240 1994-95 3.4-S, 2nd design ..... 33.99 ea PS168 1994-97 5.7-P, 2nd design ..... 13.99 ea PS227 1995-96 3.8-K, 4 prong ......... 21.99 ea PS352 1998 5.7-G ....................... 44.99 ea PS240 1997-02 3.8-K ....................... 33.99 ea PS391 1999-02 5.7-G ....................... 51.99 ea

For Vehicles Originally Equipped w/LightsPS117 1967-76 8 cylinder all ........... 5.69 ea 10045707 1968-76 6 cylinder all ........... 6.99 ea PS118 1977 231-C ....................... 8.49 ea 10045707 1977 350-R, 403-K .......... 6.99 ea PS117 1977 301-Y ...................... 5.69 ea 10045707 1978 305-U, 350-L ........... 6.99 ea 10045707 1978-79 403-K ...................... 6.99 ea PS113 1978-81 231-A....................... 8.99 ea 10045707 1979 305-G, 350-L ........... 6.99 ea PS117 1979 301-Y, 301-W .......... 5.69 ea PS115 1980 301-T, 301-W, 305-H 6.99 ea PS115 1981 4.4-J ......................... 6.99 ea PS115 1981 5.0-H ....................... 6.99 ea PS114 1981 265-S ....................... 8.99 ea PS118 1982-83 2.5-F ........................ 8.49 ea PS117 1982-84 2.8-1, 1 terminal ...... 5.69 ea PS114 1982-84 2.8-1, 2 terminal ...... 8.99 ea PS118 1982-86 2.5-2 ........................ 8.49 ea 10045707 1982-86 5.0-H, 1 terminal ..... 6.99 ea PS114 1985-86 5.0-F, 5.0-G ............. 8.99 ea PS117 1985-87 2.8-S, 1 terminal ...... 5.69 ea PS114 1985-87 2.8-S, 2 terminal ...... 8.99 ea PS154 1987-88 5.0-F, 5.7-8 .............. 11.99 ea PS154 1988 5.0-E ........................ 11.99 ea PS167 1988 2.8-S, 2 terminal ...... 17.99 ea PS207 1989-92 5.0-E, 5.0-F, 5.7-8 ... 17.99 ea PS168 1989 2.8-S, 3.8-7 .............. 13.99 ea PS118 1989 3.8-7 (switch) .......... 8.49 ea PS168 1990-91 3.1-T (fuel pmp swtch) 13.99 ea PS188 1992 3.8-T ........................ 7.99 ea

PS220 PS115

WE140 PS133

Oil Pressure Switch SocketEasily remove oil pressure sending units! This socket designed with extra recess to accommodate most oil pressure switches and many brake lamp switches. This 3/8" drive socket features a 1-1/16" Hex opening and a durable black oxide coating. X3923 .................................................... 5.99 ea

Small Block Rear Seal AdapterPlanning to use an older style crankshaft in a small block Chevy engine newer than 1986? You’ll need this billet aluminum adapter to convert to the original two piece rear seal design. Available for 1986 or newer style oil pans with the driver side dipstick or for pre-1980 oil pans with the passenger side dipstick. Includes installation hardware. 238315 adapter for 1986 or newer ... 179.99 ea 238415 adapter for pre-1980 ............ 200.99 ea

238315

G7300F31003

GT440

1970-97 Oil Filter AdapterReplacement oil fi lter adapters for 1970-79 Pontiac engines and 1977-97 Chevrolet small block engines.Note: *“Must Have” bypass valve and spring designed to GM specs of 12-16 psi.Pontiac F31003* 1970-79 Pontiac ................. 91.99 ea ChevroletG7300 1977-97 sb w/o oil cooler .. 56.99 ea

1967-69 R/A Oil Filter AdapterOil fi lter adapter which allows proper fi lter to manifold clearance on 1967-69 Firebird models with R/A exhaust manifolds. The gaskets are included with the adapter or if a replacement four piece gasket set is available separately.GT440 1967-69 adapter w/gaskets .... 54.99 ea GT4401 1967-69 gasket set ................. 16.99 set

1967-79 Oil Filter Housing GasketOil fi lter housing gasket that mounts in between the engine block and the oil fi lter housing on all V8 engines.A8700210 1967-77 Pontiac V8 ......... 4.99 ea TA4027 1977-79 Olds 403 ............ 3.99 ea

A8700210

1967-72 Oil Pressure Lead Wire BracketOil pressure sending unit lead wire elbow/bracket. For use on vehicles with gauges to connect to the wiring harness. Correct stamped brass bracket.1253514 1967-72 .................................. 4.99 ea

1967-81 Oil Sender 45 Degree ElbowThis 45 degree elbow is used on various GM fuel line and oil sender applications. This oil sending unit elbow is for all Pontiac models with factory Rally gauges. This is the correct GM type elbow that mounts the sending unit at the proper angle. Also used on other GM vehicles.9409927 1967-81 ................................... 6.99 ea

KK

En

gin

es &

Co

mp

on

en

ts

493WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Oil Pans and Components

Windage Tray ComponentWindage trays separate oil from the crankshaft as it spins, preventing excess drag and allowing increased horsepower for both street and strip. On a 400 horsepower street engine, a louvered tray can add 12-15 horsepower. Installation set sold separately.Solid Louvered Windage Tray32240 350-455 Pontiac V8 ................ 75.99 ea Windage Tray Install Set81151 350-455 Pontiac V8 ................ 61.99 set

Oil Pans

32240

81151

1955-85 Pontiac Oil Pan GasketsMilodon “Crushproof” Gasket/Seal Sets40900 1955-85 Pontiac V8 ............ 24.99 set

Leaky or Rusted Oil Pan? Go for the Gold!These stock replacement oil pans feature a distinctive gold-plating that is not only cosmetic, but also provides long-lasting protection against corrosion, inside and out. Every pan is 100% leak checked and block checked to assure the high standard of quality that Milodon is famous for. Flat, unwarped pan rails and proper bolt hole alignment provide for a fi t and function that is unmatched in the industry. All pans are specifi cally designed for use only with Milodon gaskets. Sold separately is Milodon’s “crushproof” gasket seal set, item #40900 for 326-455ci Pontiac engines. For use with original stock oil pickup screen or Milodon stock type replacement #18670 sold separately.326-455ci Pontiac30770 Milodon oil pan ....................... 169.99 ea 18670 Milodon oil pump pickup tube 34.99 ea 40900 Pontiac V8 oil pan gasket ........ 24.99 set

A Low Profi le Pan Suited for Strip or Street!This pan features oil control baffl es designed to provide consistent oil pressure by subduing unwanted, power robbing oil movement. Fits Pontiac 326, 350, 389, 400, 421, 428, and 455. Pan capacity is 7 quarts plus fi lter. Sump is 8" deep. Use with Milodon Hi-volume/Hi-pressure oil pump and correct oil pickup screen as listed below. Sold separately is Milodon’s “crushproof” gasket seal set, item #40900.Pontiac V8 Low Profi le Oil Pan30355 Pontiac V8 oil pan .............. 292.99 ea 40900 Pontiac V8 oil pan gasket .. 24.99 set Pontiac V8 Windage Tray32240 windage tray ......................... 75.99 ea 81151 windage tray installation set ... 61.99 set Pontiac V8 Oil Pump Pickup Screen18425 for 18850 pump ...................... 64.99 ea

1982-02 Genuine GM Oil PanProduction Pontiac V8 engines were redesigned in 1986 with a leak resistant one piece rear seal. This change required a revised oil pan design to fi t a new rear seal retainer which is bolted to the back of the engine block. As a result of these changes, oil pans and gaskets are not interchangeable between 1955-85 and 1986-up engines. If you have installed a crankshaft seal adapter on a block which is machined for a one piece rear seal, you must use an oil pan and gasket designed for 1986 and newer engines. Note: Gaskets not included with oil pans and must be purchased separately.G12915 1987-92 5.0-F, 5.7-8, 305-H 204.99 ea G12916 1993-97 5.7L ........................ 140.99 ea G12917 1998-02 5.7L ...................... 388.99 ea

1967-81 Chrome Replacement Oil PanOEM quality look complete with baffl e. Each pan is designed to fi t as original and holds 4 quarts. Add 1 quart when changing fi lter. This oil pan is triple chrome-plated. Fits 301-455. Note: Not for Oldsmobile engine.T9337 1967-81 .................................... 89.99 ea

30770

30355

1977-02 Oil Pump PickupA screened oil pump pickup protects the oil pump gears against damage from metal fragments which may have found there way into the oil pan. These small block Chevy oil pickups also inhibits the formation of a vortex in the oil sump.G7286 1977-92 small block ......... 23.99 ea G7286 1993-94 2nd design ........... 23.99 ea G9411 1995-97 LT1...................... 22.99 ea G9412 1998-02 LS1 ..................... 58.99 ea

G7286

Oil Pan Battery Cable ClipThis clip is installed between an oil pan bolt and the oil pan to provide a guide for the battery cable to the starter.C2555 .................................................... 6.99 ea

Oil Pan Gaskets and SealsIf you’re ordering a Milodon pan, you’ll need a Milodon gasket and seal to go with it. Choose from a steel reinforced reusable molded design or a multi-piece crushproof version made of virtually indestructible materials. A variety of applications and confi gurations are available. 1976-79 One Piece Small Block 41000 1 piece molded gasket .............. 32.99 ea 41010 1 piece molded stroker gasket .. 44.99 ea 1976-85 Crushproof Small Block 40100 5 piece gasket/seal set .............. 20.99 set 41105 4 piece stroker gasket/seal set .. 22.99 set 1986-up One Piece Small Block 41001 1 piece molded gasket .............. 37.99 ea

40100

1993-97 Replacement Oil PanReplacement oil pan for 1993-97 GM 5.7L engines. This pan is made from the same heavy gauge steel as the GM originals, with drain plug and oil level sensor bung. Note: Does not include gaskets12557557 1993-97 ............................... 34.99 ea

1967-81 Pontiac V8 Oil Pan Brackets1967-81 Pontiac V8 oil pan reinforcement brackets are designed for Firebird, Trans Am, and Formula models with original style oil pans. Fits all Pontiac Firebird V8 oil pans from 1967-81. The set includes a pair of brackets that attach to both rear corners of the oil pan. Each set of brackets are made from cold rolled, commercial quality steel and tempered for additional strength.Important: For use with original style oil pans.A8700250 1967-81 ............................... 12.99 pr

En

gin

es &

Co

mp

on

en

ts

494

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.govOil Pan Hardware

Oil Pan Hardware

Oil Pan Bolt SetARP’s premium grade pan bolts combine sealing effi ciency with good looks. They are available in black oxide fi nished chromoly steel or rustproof stainless steel. Also, take your pick from conventional Hex bolt heads and a space saving 12 point design. Includes washers.Chevrolet Small BlockAR23482 black oxide Hex head ...... 24.99 set AR23481 black oxide 12 point ........ 25.99 set AR43482 stainless Hex head ...... 35.99 set AR43481 stainless 12 point ........ 37.99 set Pontiac EngineAR20182 black oxide Hex head ...... 29.99 set AR20181 black oxide 12 point ........ 30.99 set AR40182 stainless Hex head ...... 42.99 set AR40181 stainless 12 point ........ 47.99 set

1977-81 Oil Pan Bolt SetWhen replacing your oil pan, replace your original greasy, worn out bolts with a set of chrome-plated bolts to dress-up your engine. 18 bolt set for Chevrolet small block. Fourteen 1/4"-20 x 1/2" and four 5/16"-18 x 1/2".T9271 1977-81 .................................... 11.99 set

1967-81 Oil Pan BoltsReproduction of the oil pan bolts used on 1967-81 Pontiac models. These are exactly like the original bolts to give you the look you desire.F780 1967-81 .................................... 24.99 set

1978-97 Logo Oil Pan Bolt SetDress-up your Firebird with these one-of-a kind dress-up bolt sets. The Pontiac arrowhead, GT, or fl ames logo is stamped directly onto the head of the bolts. They are available in decorative chrome-plated or polished stainless steel versions. What better way to make a statement than with these unique bolts?Note: Must specify logo suffi x after part number: A – Arrowhead, B – GT logo, C – Flames.Chrome56465C 1978-87 Chevrolet small block 35.99 set 56497C 1993-97 LT-1 engine ............... 35.99 set Stainless Steel56465S 1978-87 Chevrolet small block 19.99 set 56497S 1993-97 LT-1 engine ............... 19.99 set

C – FlamesB – GT logoA – Arrowhead

Oil Pan Bolt SetPolished and chromed, or polished stainless steel oil pan bolts will add a custom look to your oil pan while assuring high-quality. Includes all necessary fl at and internal tooth lock washers. Chevrolet small block – fourteen 1/4"-20 x 1/2" and four 5/16"-18 x 5/8".Chevrolet Small BlockAK124A polished chrome .................. 41.99 set AK124B polished stainless ................ 81.99 set

81320

head detail

AK123A head detail

1977-81 Chevrolet SB Oil Pan Bolt SetReproduction of the original style oil pan bolts used on all early Chevrolet small block engines. Zinc-plated with the “L” head markings as original, with external tooth lock washers. Fourteen 1/4"-20 x 1/2" and four 5/16"-18 x 5/8".1256657 1977-81 ................................ 13.99 set

1977-79 Trans Am Oil Pan BoltsReproduction oil pan bolts for 1977-79 Trans Am models with 403ci Oldsmobile engine. This 20 piece set comes complete with all bolts necessary to mount the oil pan.TA4014 1977-79 20 piece ................. 24.99 set

Oil Pan Hardware SetForget about cleaning up your old outdated hardware. This complete hardware set contains everything you need for a quick and accurate installation of your oil pan. Designed especially to fi rmly hold oil pans in place, without loosening up. Bolts feature a built-in serrated washer face that eliminates the need for lock washers. Construction is such that they can be used time and time again.Oil Pan Hardware Sets for Pontiac Engine85020 plated bolt ................................. 9.99 set 81320 stud and nut .............................. 33.99 set

1970-81 Oil Pressure Regulator Hole PlugGenuine plug designed to fi ll the regulator hole. Plug is designed for all 1970-81 six cylinder Firebirds.G9084 1970-81 ...................................... 4.49 ea

Oil Drain PlugReplacement oil pan drain plug designed to help eliminate the messy aspects of draining your oil. Includes a special gasket on the end of the plug to help keep the oil where it belongs while draining.66960 1/2"-20 non-magnetic ........ 4.99 ea ML17000 magnetic ............... 5.99 ea

1967-02 Oil Pan Drain PlugA magnetic drain plug is cheap insurance for a high-performance engine. This plug will catch and hold small pieces of metal before they cause damage. G8756 1967-81 non-magnetic 1/2"- 20 6.99 ea G7301 1976 magnetic 1/2"- 20 ..... 24.99 eaG9405 1979-95 M12 x 1.75 ............... 4.99 ea G8756 1988-96 1/2" - 20 .................... 6.99 ea G3739 1995-02 non-magnetic M12 x 1.75 5.99 ea

1967-02 Oil Pan Drain Plug GasketThis is a correct replacement gasket which is used to seal the oil pan drain plug and keep it from leaking. Be sure to replace the gasket whenever replacing the drain plug.G8757 1967-97 .............................. 4.99 ea G9404 1998-02 o-ring .................... 3.99 ea

1992-02 Oil Level Sensor O-RingGenuine replacement oil level sensor o-ring creates a seal between the sensor and the oil pan.G8428 1992-02 o-ring (all) ............. 4.99 ea

G8757

AR43482

G7301

KK

En

gin

es &

Co

mp

on

en

ts

495WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov Oiling Components

1970-79 Six Cylinder Dipstick TubeReproduction upper oil dipstick tube for 1970-79 Firebird models with a 6 cylinder engine. Manufactured from steel this is the tube that the dipstick slides into when checking your oil level. One required per engine.3828073 1970-79 6 cylinder ............ 22.99 ea

Oiling Components

1968-02 GM Oil Level DipstickGenuine GM replacement dipsticks will replace bent or missing originals. We offer a larger variety of these dipsticks to choose from including some 3rd generation models!G9068 1968-79 350, 400, 455 w/o AC 17.99 ea G3895 1993-94 8 cylinder ................... 27.99 ea G3896 1995-97 8 cylinder ................... 24.99 ea G3897 1998-02 8 cylinder ................... 22.99 ea

G3895

G3896

G3897

G9068

1253542

1253543

1992 Dipstick Tube NutThe dipstick tube nut for 1992 Firebird models.G8429 1992 3.1T (8mm-1.25 x 6.55) .. 1.25 ea G8430 1992 3.1T (8mm-1.25 x 7.5) .... 5.99 ea

G8429

1970-02 Oil Level Upper Dipstick TubeEach dipstick tube will replace your original exactly. We offer dipstick tubes for all generation models.Small BlockG8426 1988-92 5.0, 5.7 ................. 74.99 ea G3899 1995-97 8 cylinder ............. 22.99 ea G3916 1998-02 8 cylinder ............. 15.99 ea

1967-79 Chrome Oil Pan Dipstick and TubeAftermarket chrome oil dipstick and tube set for use on 1967-79 Pontiac V8 engines without air conditioning, except 389 and 403. Chrome-plated.Note: Will not replace 2 piece tube. Compare length and markings against original stick and tube before installing.T9405 1967-79 ...................................... 4.99 ea

1972-79 Lower Dipstick Tube with BracketReproduction of the lower dipstick tube for 1972-79 models. This dipstick will replace your original exactly.In Oil Pan, Block to Baffl e490768 1972-74 exc. 307 ............... 29.99 ea 490768 1975 ............................. 29.99 ea 490768 1976 350, 400, 455....... 29.99 ea 490768 1977 350, 400............... 29.99 ea 490768 1978-79 400....................... 29.99 ea

1967-69 Upper Dipstick Tube with ACReproduction of the upper dipstick tube for 1967-69 Firebird models with air conditioning. The bracket attaches to the front valve cover bolt as original. Stainless steel.Note: Very late 1969 models had a tube that did not attach to the valve cover. Use G9075 dipstick tube.F199 1967-69 .................................... 35.99 ea

1977-79 Flexible Engine Oil DipstickThis fl exible engine oil dipstick is designed to bolt to the block between the headers and the block. It features an aluminum handle, braided housing and stainless steel dipstick. Available for small block Chevrolet engines.50021 1977-79 small block Chevy ... 32.99 ea

Billet Aluminum Push-in Engine DipstickBillet aluminum handle with a stainless steel dipstick for pre-1980 small block Chevrolet engines. Installs straight into the engine block, no tube necessary. Seals at the bottom of the handle with two o-rings. Billet aluminum handle designed to coordinate with Lokar’s fl exible transmission dipsticks.14711 1979 and earlier rear sump ....... 36.99 ea

Flexible Engine DipstickFlexible engine dipstick designed with billet aluminum handle to coordinate with Lokar’s fl exible transmission dipsticks. Slim design allows mounting between header tubes, they can also be used with factory or Sanderson cast manifolds. Easy-to-read fl exible inner dipstick measuring cable for accurate measure of engine oil.Chevrolet Small Block14705 1979 & earlier rear sump .... 75.99 ea 14706 1980 & later rear sump .... 75.99 ea 14708 all Vortec .................... 75.99 ea 14707 1997-02 LS1 ............. 75.99 ea

1967-79 Pontiac V8 Lower Dipstick TubeReproduction lower dipstick tubes for 1967-73 models with Pontiac V8 engines.Note: Pan must be removed from engine to install tube.In Oil Pan, Block to Baffl e1253542 1967-68 39 degree angle .... 19.99 ea 1253543 1969-73 52 degree angle .... 19.99 ea

Swivoil Filter WrenchMade of high-quality steel, each wrench has a zinc- plated yoke and blackened band for resistance to rust and corrosion. The plastic dipped handle will not slide off in use. Hard to reach oil fi lters will come off easily with this swivel handle oil fi lter wrench. Swivel tension is adjusted easily using the nut and bolt on the handle.X3082 range 3-1/2" to 3-7/8" ............. 9.99 ea

1967 Oil Level DipstickReproduction original style with correct long fl at handle and loop. Fits all 326, 389 and 421 motors.9777951 1967 without AC, 17-1/2" 20.99 ea 9799240 1967 with AC, 29" ........... 20.99 ea

9777951

1967-79 Pontiac V8 Lower Dipstick TubeReproduction lower dipstick tube. This tube goes from your small lower tube that is in the oil pan up through the engine block. 9-1/16" in length. Correct for all engines, with or without air conditioning.9795830 1967-79 V8 ........................ 33.99 ea

1968-79 Oil Level DipstickReproduction original style with correct long fl at handle and loop. Fits all 350, 400, 455 Pontiac motors without air conditioning.9793342 1968-79 ................................ 17.99 ea

1977-79 Oil Level Upper Dipstick TubeReproduction of the upper dipstick tube for 1977-79 Firebird Trans Am models with 403 Olds engine.417090 1977-79 .................................... 21.99 ea

G8426 G3899G3916

En

gin

es &

Co

mp

on

en

ts

496

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.govOil Products

FilterMagFilterMag’s powerful rare earth magnets trap and hold wear inducing metal particles smaller than 40-microns down to 1-micron that the fi lter cannot stop. The super strong magnetic force holds FilterMag to the canister. FilterMags are reusable and will reduce maintenance costs by extending the life of your oil. Fits steel oil fi lter canisters from 2.9" to 5.5" in diameter. The heavy-duty/racing FilterMags have a larger curve surface that allows for a stronger magnetic fi eld and a stronger magnetic pull force, designed for more demanding situations. Flat style FilterMags are also available for automatic transmission pans and differential covers.FSS300 2.90"-3.20" 1.90" tall ...... 61.99 ea FSS365 3.50"-3.80" 2.20" tall ...... 61.99 ea

FSS375

Oiling Components

Pour Boy All Purpose Filler SpoutPour Boy all purpose fi ller spout takes the place of funnels. With its unique multiple thread design, Pour Boy fi ts a variety of containers from oil bottles to antifreeze, windshield washer fl uid to gas treatments, all with an airtight seal! Flow of the fl uid is easily controlled by simply bending the spout. No more mess! No more fuss... and... no more funnels! 3 per package.RM1003 ................................................. 7.99 kit

One Pour Boy Fits All These Containers!

1976-92 Engine SaverPrefi lter ScreenAdd life to your engine with a prefi lter screen for your oil fi lter. This stainless steel screen installs on top of conventional spin-on oil fi lters and traps debris down to the 280 micron range without restriction or loss in oil pressure, letting you examine particles from failing bearings that would normally be trapped in a fi lter, unseen. 223845 1976-92 sb Chevrolet .......... 18.99 ea

1976-92 Oil Bypass EliminatorAn oil bypass valve lets oil bypass the fi lter if pressure gets too high or the fi lter becomes plugged. For performance engines that often see increased oil pressure at high RPM, this can cause more damage than it prevents, due to the frequent circulation of unfi ltered oil. This anodized billet aluminum adaptor eliminates the bypass valve, preserving your expensive engine. For small block applications. 223775 1976-92 ................................. 39.99 ea

1976-92 Oil Return Screen SetThis oil return screen set is inexpensive insurance on any modifi ed small block Chevy engine. The screens install in and over the oil drain holes in the lifter valley, trapping debris from valvetrain failure, keeping it out of the oil pan. Includes: galley plugs, screens, and a special epoxy for installation. 225000 1976-92 ................................ 29.99 set

1993-02 Engine Oil CoolerOur high capacity 6 pass cooler features heavy-duty tube and fi n, 1/2" seamless copper tubes expanded into 3/4" aluminum extraction, plastic edge guard protectors and an attractive black powder coated fi nish. Cooler size: 7-1/2" x 17" x 3/4".15502 all 4, 6 cylinder ........... 85.99 ea 15502 1993-02 V8 .......................... 85.99 ea 15503 1955-92 Chevrolet V8 ......... 87.99 ea

14961

1989 Turbo Trans Am Oil Drain TubeReproduction oil drain tube for 1989 Trans Am with turbo engine. This tube connects the turbo to the engine block so the turbo has fresh, cool oil to lubricate its bearings. Drain tube block adapter fi tting and gasket are sold separately. 14961 1989 turbo oil drain tube 73.99 ea 14962 1989 gasket ..................... 4.99 ea A8700119 1989 adapter fi tting ......... 19.99 ea

14962A8700119

FSS300 1986-91 V8 Engine Oil Cooler LinesReproduction V8 305/350 engine oil cooler lines for 1986-91 Firebird models. Made from aluminum. The original lines were steel which tend to rust and deteriorate.A9701352 1986-91 .............................. 94.99 pr

Oil Catch TankAn oil catch tank works as a fi lter for the PCV system, reducing emissions and carbon buildup. These fabricated aluminum tanks come with mounting tabs, barbed inlet/outlet fi ttings, a drain plug, and a sight glass to let you know when it is full. 25031 round 34 oz. sealed tank ........... 74.99 ea 25051 round 17 oz. tank w/breather fi lter 77.99 ea 25131 rectangular 68 oz. sealed tank .. 124.99 ea

25131

15502

Engine Oil CoolersEngine oil is designed to act as a coolant as well as a lubricant for your motor. If the engine oil is allowed to get too hot, horsepower drops, varnishes form, and the oil starts to break down, which can lead to premature engine wear. Flex-a-lite heavy-duty oil coolers can help prevent this by keeping oil temperatures down, helping to ensure longer life to engines and components, and reduce the stress created by high-performance engine modifi cations. Also suitable as a heavy-duty transmission fl uid cooler. Includes -8, -10, and -12 interchangeable AN fi ttings with o-rings.Important: Depending on application and setup, additional fi ttings or adapters may be required.Note: Dimensions: width = 11"; depth without fan = 1-3/4", with fan = 4-1/4"; variable height, see height below in the line listings. *Dual 6.5" fans.

7/8" -14 Fine Thread FittingWithout FanFL500007 2-3/4" 7 row ...................... 201.99 ea FL500017 5-3/4" 17 row .................... 249.99 ea FL500021 7-1/2" 21 row .................... 269.99 ea FL500028 10" 28 row .................... 291.99 ea With Fan IncludedFL700021 7-1/2" 21 row, w/6.5" fan 401.99 ea FL700032 11" 32 row, w/10" fan .. 484.99 ea FL700040* 14" 40 row, w/6.5" fans 584.99 ea

FL500021

FL700021

KK

En

gin

es &

Co

mp

on

en

ts

497WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov Oil Products

Oil FilterThe K&N Performance Gold® oil fi lter has been constructed from the ground up to satisfy the vehicle owner who wants the very best oil fi lter available. The heavy-duty construction provides up to 550 psi hydrostatic burst, and helps reduce the risk of rock or stone damage. But the real quality isn’t just on the outside, the inner fi lter element traps contaminants as small as 10 to 20 microns in size. Metal top end caps are used instead of paper to ensure that no unfi ltered oil can get back into the system. High volume positive oil fl ow with low restriction coupled with exacting engineering standards results in the right balance between engine protection and low oil pump drag. Simply put, the K&N oil fi lter is the very best fi lter money can buy.HP2003 1968 250...................... 12.99 ea HP2003 1968 400...................... 12.99 ea HP2003 1968-69 350...................... 12.99 ea HP2003 1969 250 w/1 barrel .... 12.99 ea HP2003 1969-70 400 w/4 barrel .... 12.99 ea HP2002 1970-76 250 w/1 barrel .... 11.99 ea HP2003 1970-76 350 w/2 barrel .... 12.99 ea HP2003 1971-79 400 w/4 barrel .... 12.99 ea HP2003 1971-76 455 w/4 barrel .... 12.99 ea HP2003 1972-74 400 w/2 barrel .... 12.99 ea HP2003 1975-77 350 w/4 barrel .... 12.99 ea HP2003 1977 403 w/4 barrel .... 12.99 ea HP2002 1977 301 w/2 barrel .... 11.99 ea HP1001 1977-80 231 w/2 barrel .... 11.99 ea HP2006 1978-79 403 w/4 barrel .... 11.99 ea HP2002 1978-79 350 w/4 barrel .... 11.99 ea HP2002 1978-79 305 w/2 barrel .... 11.99 ea HP1001 1979 301 w/2 barrel .... 11.99 ea HP1001 1979-80 301 w/4 barrel .... 11.99 ea HP2002 1980 305 w/4 barrel .... 11.99 ea HP2002 1981-87 5.0L w/4 barrel ... 11.99 ea HP1001 1981 4.9L w/4 barrel ... 11.99 ea HP1001 1981 4.3L w/2 barrel ... 11.99 ea HP1001 1981 3.8L w/2 barrel ... 11.99 ea HP2002 1982-83 5.0L w/TBI ......... 11.99 ea HP1001 1982-84 2.8L w/2 barrel ... 11.99 ea HP1001 1982-83 2.5L w/TBI ......... 11.99 ea HP1001 1984-86 2.5L w/FI ............ 11.99 ea HP2002 1985-86 5.0L w/FI ............ 11.99 ea HP1001 1985-86 2.8L w/FI ............ 11.99 ea HP2002 1987-89 5.7L w/TPI ......... 11.99 ea HP2002 1987-89 5.0L w/TPI ......... 11.99 ea HP1001 1987 2.8L w/MFI ........ 11.99 ea HP2002 1988 5.0L w/FI ............ 11.99 ea HP2001 1988-89 2.8L w/FI ............ 11.99 ea HP2002 1989-90 5.0L w/EFI ......... 11.99 ea HP3002 1989 3.8L w/FI ............ 12.99 ea HP2002 1990-97 5.7L w/FI ............ 11.99 ea HP2001 1990-92 3.1L w/FI ............ 11.99 ea HP2002 1991-92 5.0L w/TPI ......... 11.99 ea HP2002 1991-92 5.0L w/TBI ......... 11.99 ea HP1001 1993-95 3.4L w/FI ............ 11.99 ea HP1001 1995-02 3.8L w/FI ............ 11.99 ea HP1007 1998-02 5.7L w/FI ............ 11.99 ea

Oil and Oil Filters

Chrome Oil Filter CoverAdd protection to your fi lter while achieving a high-performance look! This chrome-plated cover installs quickly and looks great. Just slip the cover over your oil fi lter and tighten the set screw to just snug. Each cover includes triple chrome-plating for an extra bright fi nish. 3-11/16" i.d. x 5-3/16" tall.T1067 .................................................... 7.99 ea

Provides Up to 550 psi Hydrostatic Burst and Traps Contaminants as Small

as 10 to 20-Microns!

Triple Chrome-Plating For a Durable Shine!

Original Style Oil Filters with AC LogoGenuine AC Delco original style oil fi lters for Pontiac Firebird engines. Designed with a steel core and a traditional mounting plate, each fi lter offers enhanced effi ciency and consistent fl ow management to provide exceptional fi ltering performance for classic vehicles. The original style fi lters feature original fi lter specs and sizes along with a anti-drain back valve to keep the oil cooler full of oil (on cooler equipped vehicles). Reproduction fi lters feature a modern PF24 AC Delco fi lter repainted to provide a period correct replacement. Each fi lter is white in color, with a vintage style AC bulls eye logo design and classic double blue stripes, to help restore the original look of your classic vehicle. Fits 6 cylinder and V8 engines as indicated.Note: *Without anti-drain back valve.Original Style – Original Specs, Sizes and ColorsPF24A 1967-69 L6 models .......... 42.99 eaPF24A 1967-76 V8 models ......... 42.99 eaReproduction – Modern Spec Filter withOriginal ColorsPF24B* 1967-69 L6 models .......... 27.99 ea PF24B* 1967-76 V8 models ......... 27.99 ea

PF24A

PF454 PF47

AC Delco Oil FiltersGenuine AC Delco oil fi lters for Pontiac Firebird engines. Designed with a steel core and a traditional mounting plate, each fi lter offers enhanced effi ciency and consistent fl ow management to provide exceptional fi ltering performance for classic vehicles. The Classic Series fi lters offer you the original size and specifi cations of the original fi lter, but with a modern day, blue AC Delco canister. The Professional Series is the modern day, blue AC Delco fi lter currently being offered by GM. Both styles feature a anti-drain back valve to keep the oil cooler full of oil (on cooler equipped vehicles). Fits 6 cylinders as well as V8 engines as indicated.Classic SeriesPF454CL 1970-76 6 cylinder models ... 8.99 ea PF454CL 1978-81 Pontiac V8 305, 350 .. 8.99 ea Professional SeriesPF24C 1967-69 6 cylinder models ... 5.99 ea PF454 1970-76 6 cylinder models ... 6.99 ea PF47 1977-81 6 cylinder ............... 5.99 ea PF24C 1967-76 V8 models .............. 5.99 ea PF454 1978-81 Pontiac V8 305, 350 .. 6.99 ea PF47 1979-81 Pontiac V8 301, 365 .. 5.99 ea

Break-in OilBR is used by Joe Gibbs Racing to break-in and dyno all their NASCAR Nextel Cup and Busch Series engines. This petroleum based oil provides superior break-in properties for fl at-tappet engines. The special additive package promotes ring seal and provides maximum protection for cams and lifters during initial break-in. BR can also be used to break-in roller cam engines,and as a general purpose dyno oil.BR106 15W50 quart ..................... 9.99 ea BR107 15W50 case of 12 quarts ... 102.99 cs BR114 15W50 5 gallon pail .......... 7.99 ea

Synthetic OilDelivers superior protection and improves performance in four cycle gasoline and diesel engines. Increase horsepower and torque, save fuel and reduce heat, wear and emissions! It has unsurpassed oxidation stability that allows for extended oil drains and fewer oil changes, which saves time, money and reduces the impact on the environment. Royal Purple’s motor oils for passenger cars and trucks are API licensed. Performance advantages come from a blend of synthetic oils plus Royal Purple’s proprietary Synerlec technology. Compatible with other mineral and synthetic motor oils.QuartsRP01030 SAE30 quart ................... 11.99 ea RP01520 5W20 quart ................... 9.99 ea RP01530 5W30 quart ................... 9.99 ea RP01130 10W30 quart ................... 9.99 ea RP01140 10W40 quart ................... 9.99 ea RP01250 20W50 quart ................... 9.99 ea CasesRP12030 SAE30 case of 12 quarts 129.99 cs RP12520 5W20 case of 12 quarts 107.99 cs RP12530 5W30 case of 12 quarts 107.99 cs RP12130 10W30 case of 12 quarts 107.99 cs RP12140 10W40 case of 12 quarts 107.99 cs RP12250 20W50 case of 12 quarts 107.99 cs

Engine Break-In OilRoyal Purple has developed an engine break-in oil formulated to allow optimal ring seal and protect rotating assembly components from initial start up wear. Combines highly refi ned mineral oil, preferred for engine break-in, with advanced additives containing high levels of zinc and phosphorus to optimize protection in fl at-tappet and roller engines. Does not require the use of any other chemical additives. Royal Purple recommends using their high-performance motor oils after the engine is broken in for maximum engine performance.

RP11487 quart .................................. 10.99 ea RP11497 case of 12 .......................... 113.99 cs

Hot Rod Vintage Car OilJoe Gibbs Driven Hot Rod Oil is designed specifi cally for hot rods, street rods, and vintage cars. This formulation is used by thousands of racers while adding critical additives to protect engines. Designed specifi cally for older style historic car and hot rod engines, Joe Gibbs Driven Hot Rod Oil features high levels of zinc for wear protection as well as U.S. Military grade rust and corrosion inhibitors for storage protection. HR1506 10W30 quart ..................... 11.99 ea HR1507 10W30 case of 12 quarts .. 129.99 cs HR1606 15W50 quart ..................... 11.99 ea HR1607 15W50 case of 12 quarts .. 129.99 cs

En

gin

es &

Co

mp

on

en

ts

498

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Street Fire HEI DistributorStreet Fire value line brand components will offer a quality designed alternative to the bottom bargain parts that are springing up all over. We’re so assured with the quality of our new Street Fire HEI Distributor that we provide a one year warranty with it! We know the importance of a centrifugal advance in a distributor so our engineers made sure that the Street Fire received an advance assembly with coated weights and welded weight pins (not just pressed in like other models). Another area that you can not afford to scrimp on is with a distributor gear. The Street Fire is fi t with the same gear that is used on our Pro-Billet models. The metallurgy of this gear has been refi ned for years to perform through the harshest conditions. Inside, the ignition module and coil work together to produce a stout spark to light the fuel mixture for great performance. The high voltage is transferred through a new rotor to the brass terminals of the distributor cap and out to the plugs.Chevrolet Small Block8362 Street Fire HEI ....................... 177.99 ea 8411 cap .......................................... 36.99 ea 8410 rotor ........................................ 8.99 ea 8402 coil cover ................................ 23.99 ea

Ignition Products

836518381

8362

Ignition Products

1967-02 Pro-Billet DistributorThese distributors feature a fl awless lightweight CNC-machined 6061-T6 billet aluminum housing and a polished steel shaft that receives a QPQ, or Tuftride coating. To accurately guide this shaft, MSD uses a sealed ball bearing located at the top of the housing. At the bottom of the housing, an extra long sintered bushing controls the shaft. This combination keeps the shaft spinning smooth and accurately throughout 10,000+ RPM. Other features include an iron drive gear, Rynite® distributor cap with brass terminals and a high output magnetic pickup to trigger the ignition. Choose from the “standard” Pro-Billet distributors that utilize the MSD 6, 7, 8, or 10 series ignition control box or from our “Ready-to-Run” distributors that are internally controlled. “Ready-to-Run” distributors do not require an external controller and are the “Plug and Play” alternative to more expensive computer controlled systems.

“Standard” Pro-Billet DistributorsFor use with MSD 6, 7, 8, or 10 series ignition.1967-02 Pontiac 326-455ci8563 ................................................... 367.99 ea 1977-86 Chevrolet Small Block8361 with vacuum advance ................ 314.99 ea 85551 with mechanical advance ........... 296.99 ea 84891 w/low profi le fl at-top crab cap ... 455.99 ea 85701 small diameter ........................... 341.99 ea “Ready-to-Run” Pro-Billet Distributors

Ready-to-Run distributors are designed as a “Plug and Play” distributor. No external ignition control box is needed.1967-02 Pontiac 326-455ci8528 ................................................... 480.99 ea 1977-86 Chevrolet Small Block8360 with optional vacuum advance .. 381.99 ea 83651 HEI w/hi-energy module & coil 471.99 ea 8394 Digital E-Curve w/adj. timing ... 515.99 ea 8572 tach drive with vac. advance ..... 491.99 ea 1987-93 Chevrolet V6 and V883661 V8 with dual connector coil ...... 361.99 ea 1993-97 Chevrolet LT-1 Engines8381 1993-94 ...................................... 595.99 ea 83811 1995-97 ...................................... 595.99 ea Replacement Parts for MSD Distributors1967-02 Pontiac 326-455ci8433 dist. cap for 8563, 8528 ............. 42.99 ea 8467 rotor for 8563, 8528 ................... 11.99 ea 1977-86 Chevrolet Small Block8433 cap for 8360, 8361, 85551 ......... 42.99 ea 84111 cap for HEI dist. 83651 ............. 51.99 ea 8433 cap for 8394 with male term ...... 42.99 ea 8437 cap for 8394 with female term... 29.99 ea 8431 cap for 85701 small dia. dist. .... 42.99 ea 8541 cap for Flat-Top crab cap dist. ... 64.99 ea 8467 rotor for 8360, 8361, 8394, 85551 11.99 ea 8467 rotor for 85701 small dia. dist. .. 11.99 ea 84101 rotor for 83651 ........................... 19.99 ea 8531 dist. drive gear ............................ 36.99 ea 1987-93 Chevrolet V6 and V88406 V8, cap and rotor for 83661 ...... 35.99 set 84301 V6, cap and rotor for 83671 ...... 32.99 set 1993-97 Chevrolet LT-1 Engines8481 cap and rotor for 8381 ............... 186.99 ea 84811 cap and rotor for 83811 ............. 183.99 ea

Noise FilterIf you experience radio noise after installing the MSD Ignition, you may need to install an MSD Noise Filter. Electro Magnetic Interference (EMI) is occasionally generated from the MSD power cables and can be easily eliminated by installing the Noise Filter on the heavy power supply wires coming from the MSD. It is recommended that the noise fi lter be used on installations with the MSD 7 and 8 Series Ignitions to prevent this interference. Includes noise fi lter cover.8830 MSD noise fi lter with cover ..... 48.99 ea

Ignition System CoilThe following Blaster coils share the same special windings and high voltage output as the other Blaster 2 coils, but do not include a ballast resistor. When you are using an MSD Ignition Control, the ignition is responsible for delivering the voltage to the coil so a ballast is not necessary. The Blaster 3 coil features an extra tall tower design to improve the coil wire attachment and spark isolation and is supplied with a 90 degree terminal and boot.8202 Blaster 2 ................................... 55.99 ea 8223 Blaster 3 ................................... 57.99 ea

8223

Blaster SS CoilDon’t let the compact size of the Blaster SS coil fool you because it is packed with performance. The effi cient E-core windings are designed to produce high amounts of current without sacrifi cing the voltage output. In fact, when used with an MSD 6 Series Ignition, the Blaster SS produces 300 milliamps with a maximum voltage output of 40,000 Volts. The secondary windings are wound on a segmented bobbin which reduces the chance of voltage breakdown between the primary and secondary windings. For more protection, these windings are encased in a polyurethane compound for complete protection against vibration. The Blaster SS features brass terminals and a sturdy Rynite housing. It is supplied with a 90 degree boot, terminal and vibration mounts. A great addition to CD Ignitions and some stock applications. 8207 Blaster SS coil ............................. 63.99 ea

Blaster Performance CoilWith a stock points style ignition, a ballast resistor must be placed in-line with the positive terminal of the coil. The following Blaster coils are supplied with a 0.8 Ohm ballast resistor plus a terminal and boot to fi t most applications. Mallory Unilite applications also require the ballast resistor. Available in chrome or red.Important: The ballast is not necessary if an MSD 6 or 7 series ignition control is being used with the points distributor. 8200 Blaster 2 chrome ................... 58.99 set 8203 Blaster 2 red .......................... 63.99 set

6A/6AL Ignition ControlMSD’s new Digital 6A is the base model of the capacitive discharge multiple spark 6 Series design. Features the same footprint as the traditional 6A and 6AL, but with a lower profi le for a sleek look. Like all MSD 6 Series Ignitions, the 6A will work with virtually any vehicle as long as it has a 12-18 Volt electrical system. It can be triggered using breaker points, a magnetic pickup or the output of an electronic amplifi er. All necessary parts and wiring instructions are included. Will work on 4, 6, and 8 cylinder engines. The new Digital 6AL shares the same proven circuitry of the Digital 6A with the addition of a built-in adjustable rev limiter with two top mounted rotary dials. The combination of powerful sparks with the safety of a rev control is what makes the Digital 6AL the most popular ignition control in the world. 6201 all V8 without rev limiter ....... 245.99 ea 6425 all V8 with rev limiter ............ 284.99 ea

6425

8200

6LS Ignition ControllerThe 6LS-2 ignition controller allows you to map a timing advance curve, as well as program a two step rev limiter, a vacuum advance curve, and even a step retard in case you want to add nitrous to the mix. The 6LS-2 is designed specifi cally for LS2/LS7 type engines with a 58 tooth wheel and gray crank sensor connector. This 6LS-2 ignition controller uses factory style connectors for a direct installation and is compatible with carburetors and EFI. Includes software CD, six timing modules, harness, and instructions. Made in USA.Note: Does not control fuel injection.6012 LS2/LS7 ignition controller ... 364.99 ea

KK

En

gin

es &

Co

mp

on

en

ts

499WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Ignition Products

Ignition Products

8.5mm Super Conductor Spark Plug WiresThese wires have extremely low resistance combined with the ability to suppress electro-magnetic interference. The super conductor uses a copper alloy conductor resulting in less than 50 Ohms per foot of wire. This ensures that the most energy possible makes it to the spark plug. This combination is encased in a heavy-duty sleeve that will withstand abrasion and high temperatures. Important: *With wires over valve covers. **Without turbo.

Red WiresPontiac31183** 1975-92 260, 265, 301, 350 111.99 set 31409 1981-02 267, 305................ 116.99 set Chevrolet Small Block31359* 1977-82 .............................. 98.99 set 31409 1978-82 with HEI ............... 116.99 set 32149 1993-97 LT1 ....................... 155.99 set 32819 1998-02 LS1 ....................... 84.99 set

Black WiresPontiac31183** 1975-92 260, 265, 301, 350 111.99 set Chevrolet Small Block31353* 1977-82 with HEI ............... 98.99 set 32043 1993-97 LT1 ....................... 155.99 set 32813 1998-02 LS1 ....................... 84.99 set

Spark GuardMSD’s spark guard is a dielectric grease that solves many common ignition troubles. It stops voltage leaks, eases boot removal, prevents moisture buildup inside the spark plug wire boots, and even helps protect against radio noise (EMI). It also simplifi es the installation of MSD universal spark plug wire sets. Spark guard will not dry up or harden so it will retain its spark isolating capabilities indefi nitely.8804 .................................................. 21.99 ea

Pro-Crimp ToolIf you make numbers of plug wires or do a lot of custom wiring, the new Pro-Crimp tool is a must for your toolbox. The Pro-Crimp features interchangeable jaws allowing for a variety of different style crimps with one heavy-duty tool. The Pro-Crimp features a hardened steel frame with comfortable molded hand grips. The slick ratchet action provides secure, factory quality crimps every time. The tool is supplied with precision crimping/stripping jaws for MSD’s spark plug wire terminals.35051 Pro-Crimp tool II ...................... 96.99 ea

Pro-Crimp DiesThese dies are for use with MSD’s Pro-Crimp crimping tool #35051. A variety of interchangeable dies are available for a variety of jobs. 3506 amp pin terminal dies ............... 38.99 ea 3507 amp lug terminal dies ............... 38.99 ea 3508 plug wire terminal dies ............. 33.99 ea 3509 weather tight terminal dies ....... 50.99 ea 3510 Deutsch terminal dies ............... 50.99 ea

Tachometer AdapterMSD tach adapters will correct the operation of most voltage triggered tachometers or fuel injection systems that do not work directly off the tach output terminal of the MSD ignition unit. If you are triggering an MSD Blaster, 5, 6, SCI, or 7 series ignition with its white wire or points terminal, you will need item #8910 or 8910E. For applications using green and violet wires for magnetic pickup input, use item #8920.Important: *For use on non-current limiting ignitions, originally equipped with a ballast resistor. **For use on current limiting ignitions, not originally equipped with a ballast resistor. 8910* points or amplifi er ................ 60.99 ea 8910E** points or amplifi er ................ 63.99 ea 8920 magnetic pickup ................... 78.99 ea

31363

3508

2-in-1 Universal Wire SetThese universal spark plug wires sets are made from MSDs super conductor performance wire. Universal wire sets have only the spark plug boot and terminal installed. These boots and terminals are available in your choice of a 90 degree boot or a multi-angle boot. The distributor end boots and terminals are supplied, but not crimped on. Both sets include terminals for engines with either the early style (socket) and late style (HEI) distributor caps. The wires are extra long so they can be cut-to-fi t any application. Each set includes a MSD mini-stripper crimper for easy installation. Available with wires in either black or red. 90 Degree Angle31233 black .................................... 119.99 set 31239 red ........................................ 119.99 set Multi-Angle31193 black .................................... 119.99 set 31199 red ........................................ 119.99 set

Universal Super Conductor wires shown with multi-angle boots.

90 degree boot

multi-angle boots

Coil WireIf you’re changing a coil or cap to a new design, you could fi nd yourself searching for different terminals for the coil wire. MSD offers these two style coil wires to make the change easy. Also, remember that the coil wire sees eight times the use of each plug wire so changing the coil wire as a maintenance through the race season is recommended. Important: *18" long, straight female socket coil terminal and boot on one side with a straight female socket distributor cap socket terminal and boot on the other. **18" long, 90 degree male coil terminals and boots are installed on both sides to connect to an HEI style terminal. A terminal adapter is also supplied to adapt to a female socket style distributor cap. 84049* 8.5mm Super Conductor .......... 19.99 ea 84039** 8.5mm Super Conductor, red ... 17.99 ea 84033** 8.5mm Super Conductor, black 19.99 ea

84039

8920

6 Series Vibration MountsIn performance applications such as off-road, racing, and marine applications, strong vibrations can be transmitted through the chassis to the MSD unit. To protect the MSD from excessive vibration, we recommend this vibration mount set. 8823 ................................................... 17.99 set

Timing LightThese timing lights are designed and built for superior accuracy and ease of use. Solid state circuitry provides stable and accurate timing signals up to 8000 RPM. A battery powered version, accurate up to 5000 RPM, is also available. Each durable lightweight timing assembly has a super bright strobe that makes timing adjustments simple, even in direct sunlight. Both include a detachable inductive pickup for easy storage. 8990 standard timing light ................ 192.99 ea 8991 battery powered timing light .... 255.99 ea

8991

8990

En

gin

es &

Co

mp

on

en

ts

500

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Performance Ignition

Performance Ignition

Dual Point IgnitionEconomical dual point ignition distributors have heavy-duty dual points for increased RPM range and coil output. Choose from our mechanical advance or vacuum advance models. Also available for those running a mechanical tach is a mechanical advance model with mechanical tach drive output.Pontiac V82658001 w/mech. adv. & tach drive .. 494.99 ea

Performance CoilReplace your stock coil with a Mallory high-performance coil for increased performance, longer life and maximum dependability. A variety of applications are available for your classic Chevrolet engine.External Ignition Coil for HEI Ignition5526 1987-93 V8 w/FI exc. LT-1 47.99 ea

1967-95 GM Distributor Tune-Up PartsIf your vehicle is equipped with a V8 engine and a GM factory distributor, upgrade to Accel components during your next tune-up. Distributor Cap120137 1987-93 V8 w/FI exc. LT-1 .. 31.99 eaRotor Cap130137 1987-93 V8 w/FI exc. LT-1 .. 14.99 eaPoints110128 1967-74 high-performance .. 33.99 ea Ignition Control Module35361 1974-87 HEI, 4 prong .......... 52.99 ea 35363 1981-90 HEI, 7 prong .......... 66.99 ea 35362 1986-90 GM dist #1103749 62.99 ea 35370E 1990-95 GM dist #1103880 99.99 ea

Power Pack Ignition SystemThis ignition system includes everything needed for a dependable high-performance ignition in one package. The system included a Pro Billet distributor which features a billet aluminum housing with adjustable collar, sealed ball bearings, mechanical advance with extra springs for multiple curves and a multi-polymer distributor cap with brass contacts. The system also includes a 50 kV power coil and a high output digital 6AL multiple spark capacitive discharge power box with adjustable rev limiter.Note: Not for use with 348-427 W-series engines.A7700203 Chevrolet 262-454ci V8 ... 341.99 ea

Power CoilThe TSP power coil is capable of delivering a longer and hotter spark with up to 70% more spark energy than stock ignition coils. Its convenient design easily mounts to fi re walls, core supports and fender wells. It features an aluminum heat sink keeping it cooler for more effi cient energy output at lower temperatures. Coils have an HEI style output tower and are rated at 50 kV maximum voltage with 260 mA peak current with 0.35 Ohm primary resistance. Coils include installation hardware, a coil wire boot with terminal and a wiring harness.A7700200 red coil .............................. 39.99 ea A7700201 blue coil ............................. 39.99 ea A7700202 black coil ........................... 39.99 ea

40025042X

Breakerless Distributor PartsTune-up parts for Mallory breakerless distributors.Module605 all series (except 50 and 57) ... 64.99 ea Distributor Cap209M all 8 cylinder series ................ 28.99 ea Distributor Rotor335 37 and 38 series ...................... 16.99 ea 322 47 series 8 cylinder ................ 18.99 ea Harness29349 all series .................................... 19.99 ea

Breaker Point Distributor PartsTune-up parts for Mallory breaker point distributors.Performance Points25042X all series .................................... 25.99 ea Condenser400 all series (except 27) ................. 8.99 ea 401 27 series .................................... 11.99 ea Distributor Cap209M all 8 cylinder series .................. 28.99 ea

29349

335

322

209M401

605

607

Tune-Up Parts for GM DistributorsIf your vehicle is equipped with a Chevrolet V8 engine and a GM factory distributor, upgrade to Mallory components during your next tune-up. You’ll enjoy increased performance, longer life and maximum dependability. Ignition Control Module607 1974-87 V8 HEI., 4 prong .. 45.99 ea 84665 1987-93 V8 w/FI exc. LT-1 84.99 ea

1957-74 E-Spark Conversion SetAre you tired of constantly having to adjust and replace points in your distributor? Eliminate those pesky points altogether with Mallory’s new, low cost E-Spark conversion sets. This self-contained conversion set fi ts neatly within a stock GM or Mallory distributor cap, so it looks like original from the outside. Thanks to specialized electronic circuitry and an infrared signal, you’ll never again have moving parts to wear out, and you gain better performance, drivablity, and throttle response, plus improved fuel effi ciency! Delco Distributor61001M 1957-74 all w/window cap .... 90.99 set

Unilite Conversion for GM DistributorsUnilite conversion sets for point distributors put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion set. By utilizing specialized electronic circuitry and an infrared signal, ignition timing is stable from 1 RPM through 10,000! Features include more accurate ignition timing than any other type of system, improves performance and fuel effi ciency, easy-to-install with simple hand tools, reduced maintenance (never change points again) and latest thermal clad based surface mount construction for maximum dependability and long-life.501 1957-74 8 cylinder. ................ 84.99 set

A7700200

110128

3536235361

120137

KK

En

gin

es &

Co

mp

on

en

ts

501WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov Performance Ignition

SuperStock 300+ 8.8mm 8.8mm Extreme Year Engine, Model and Notes SuperStock Spiral Race Spiral C/G 9000 1967-74 8 cyl. with point ignition 4040,B,K,R 5040B,K,R,Y 7032 8033 8022 A8700197 1967-74 6 cyl. with point ignition 4021 5040B,K,R,Y 7032 8036 8026 A8700197 1974-81 8 cyl. Pontiac engine with HEI, except turbo 4040,B,K,R 5040B,K,R,Y 7033 8033 8023 A8700197 1975-76 6 cyl. with HEI 4021 5040B,K,R,Y 7033 8036 8026 A8700197 1977-79 8 cyl. Oldsmobile engine 4040,B,K,R 5040B,K,R,Y 7033 8033 8023 A8700197 1977-86 8 cyl. Chevrolet engine eight 90 boots 4041,B,K,R 5041B,K,R,Y • 8031 8021 A8700198 1977-87 6 cyl. 3.8, 4.1 4021 5040B,K,R,Y 7033 8036 8026 A8700197 1978-81 8 cyl. Buick engine 4040,B,K,R 5040B,K,R,Y 7033 8033 8023 A8700197 1980-81 8 cyl. 4.9 301 Turbo engine • • 7033 8033 • • 1982-92 6 cyl. 2.8, 3.1 4021 5040B,K,R,Y 7033 8036 8026 A8700197 1987-92 8 cyl. Chevrolet engine eight 90 boots • • • 8031 8021 •

Fiberglass Braid

Conductive Coating

8.0MM High Gloss Yellow, Blue, Black, or Red 550 degrees F Silicone Jacket

High Density,High Temperature,High Durometer Silicone Insulation

Fiberglass/Kevlar Stranded Inner Core

Heavy Gauge Stainless Steel Alloy Conductor

Carbon GraphiteSemi-Reactive Element

Fiberglass Braid

Conductive Coating

8.8MM High Gloss Yellow 550 degrees F Silicone Jacket

High Density,High Temperature,High Durometer Silicone Insulation

Fiberglass/Kevlar Stranded Inner Core

Heavy Gauge Stainless Steel Alloy Conductor

Carbon GraphiteSemi-Reactive Element

Fiberglass Braid

Conductive Coating

8.8MM High Gloss Black 600 degrees F Silicone Jacket

High Density, High TemperatureHigh Durometer Silicone Insulation

All Kevlar Stranded Inner Core

Heavy Gauge Copper-Nickel Alloy Conductor

FerriteEMI/RFISuppression Element

1967-01 High-Performance CoilReplace your stock coil with an Accel high-performance coil for increased performance, longer life and maximum dependability. A variety of applications are available for breaker point and breakerless ignition.

Ignition Coil42,000 Volt Coil – Breaker Point Ignition8140C 1967-74 chrome. .................... 36.99 ea 8140 1967-74 yellow ...................... 31.99 ea 45,000 Volt Coil – Breaker Point or Breakerless Ignition140001 1967-74 super coil ................. 78.99 ea 45,000 Volt Coil for Breakerless Ignition8145C 1967-74 chrome. .................... 48.99 ea 8145 1967-74 yellow ...................... 41.99 ea 45,000 Volt HEI In-Cap Super Coil with Cover140003 1974-87 w/red & yellow wires 78.99 ea 140005 1974-87 w/red & white wires 78.99 ea 48,000 Volt HEI In-Cap Super Coil140013 1974-87 w/red & yellow wires 78.99 ea Cover for 48,000 Volt HEI In-Cap Super Coil48,000 Volt HEI Remote Mount Super Coil140011 1984-95 ................................. 52.99 ea 45,000 Volt AC/Delco Style DIS Super Coil140017 1986-01 ................................. 48.99 ea

140011 140017

Performance Ignition

Superstock SpiralApplications: Late model coverage.Features: Color matched silicone spark plug boots, high gloss blue, black, red and yellow wire, stainless steel spark plug terminals.Benefi ts: Increased ignition energy due to lower resistance, oversized upgrade where OE is 7mm.Construction: 8mm, 550 degrees F double silicone construction with a fi berglass braid.Core: Spiral wound stainless steel alloy conductor, magnetic suppression and semi-reactive material, fi berglass/Kevlar core, 500 Ohms per foot resistance.Note: Available in yellow, blue, black, or red. Specify color when ordering. 5040 8mm specify color ............ 61.99 set 5041 8mm specify color ............ 66.99 set

SuperstockApplications: Performance upgrade to OE type/replacement type.Features: Silicone spark plug boots, yellow, blue, red, and black silicone wire, zinc-plated steel spark plug terminals.Benefi ts: Effi cient transmitter of ignition energy, popular priced performance, oversized upgrade where OE is 7mm.Construction: 8mm, 450 degree F silicone and EPDM rubber construction with a fi berglass braid.Core: Carbon/graphite conductive material, high resistance suppression, fi berglass/Kevlar, 3000-7000 Ohms per foot resistance. Note: Available in yellow, blue, black, or red. Specify color when ordering.4040 8mm specify color ............ 47.99 set 4041 8mm specify color ............ 47.99 set

Fiberglass Braid

Conductive High Resistance Carbon Graphite

8.0mm High Gloss Yellow, Blue, Black or Red 450 Degrees F

High Density, High Durometer

Fiberglass/Kevlar Stranded

EXTREME 9000 Ceramic WiresIncrease ignition energy with these incredibly low resistance severe duty spark plug wires! These 8mm wires are designed for forced induction, HD truck, and racing applications. These wires can withstand up to 600 degrees F while offering a mere 500 Ohm/ft of resistance and complete EMI/RFI suppression. The ceramic plug boots and stainless steel terminals withstand temperatures up to 2000 degrees F. Compatible with both pre- and post-HEI systems.Important: Universal 8 cylinder sets can be used for 6 cylinder applications.With Straight White Ceramic Boots A8700197 8mm black .................... 122.99 set With 90 Degree White Ceramic Boots A8700198 8mm black .................... 122.99 set With 45 Degree White Ceramic Boots A8700199 8mm black .................... 122.99 set

8.8mm SpiralThis ACCEL 8.8mm wire set feature a carbon/graphite element that virtually eliminate RFI noise while providing maximum conductivity for ultimate performance in any race or street application. Double silicon insulation eliminates leakage and misfi re.Applications: Performance street/strip.Features: 8.8mm oversized wire, oversized 8.8mm silicone spark plug boots, high gloss yellow wire, stainless steel spark plug terminals.Benefi ts: True performance upgrade, increased ignition energy due to lower resistance.Construction: 8.8mm, 550 degrees F double silicone construction with a fi berglass braid.Core: Spiral wound stainless steel alloy conductor, magnetic suppression, semi-reactive material, fi berglass/Kevlar core, 500 Ohms per foot resistance.Spiral Core 8031 8.8mm yellow ...................... 105.99 set 8033 8.8mm yellow ...................... 99.99 set

8140 8140C

140001

8145

8145C 8145

140005

En

gin

es &

Co

mp

on

en

ts

502

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

HyperSpark Ignition CoilSniper EFI HyperSpark ignition coil from Holley Performance. This coil features an innovative connector and integrated bracket for a secure connection and simplifi ed mounting. Its powerful 135MJ of spark ensure complete combustion and improved performance. Like the rest of the HyperSpark line of ignition products, this coil is designed tobe “Plug and Play” with Sniper EFI Systems.

H556152 ............................................. 39.99 ea

HC 60,000 Volt CoilThe Flame-Thrower HC (high current) coils have an E-Core design which is rated at 60,000 Volts with an ultra low .32 primary resistance and has a high current design for a rapid charge rate. Made from 6063-T5 aluminum, it effi ciently transfers heat to optimize energy output. The housing is black anodized for increased corrosion resistance and has a precision machined male high tension terminal and brass primary terminals. It is compatible with Ignitor II and Ignitor III systems as well as most capacitive discharge boxes. Standard threaded connections and mounting hardwareare included.PX60103 0.32 Ohm .............................. 71.99 ea

NEVER CHANGE POINTS AGAIN!NEVER CHANGEPOINTS AGAIN!

Eliminates points and moving parts that wear out, while delivering twice the voltage to the spark plugs over stock to increase horsepower, fuel economy and plug life! Optimal performance can be achieved when used with the Flame-Thrower 40,000 Volt coil. Ignitor is concealed entirely within the distributor so you have no unsightly black box to clutter up your engine compartment. Easily installs in minutes with no complex wiring, is compatible with 12 Volt negative ground systems, and it’s smog legal in all 50 states and Canada! Comes with a 30-month warranty.6 CylinderPX1162A 1963-74 6 cylinder ....... 88.99 set 8 Cylinder with Point Lobe Style SensorPX1181LSC 1957-74 8 cylinder ....... 77.99 set 8 Cylinder with Hall-Effect Style SensorPX1181 1957-74 8 cylinder ....... 77.99 set

Ignitor shownhere installed

30 Month

Limited

Warranty

Ignition box performance without the box. The Ignitor III is the most advanced points replacement set. It is literally an ignition box inside your distributor. It features multiple sparks throughout the entire RPM range and a REV limiter accurate to +/- 50 RPM which is set by you with an LED user feedback for rev limit confi rmation. The Ignitor III module generates 5 times more spark than points. This means more spark energy creating more horsepower and better mileage. The Ignitor III features include: adaptive dwell which maintains peak energy throughout the entire RPM range, reducing misfi res while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. Legal in all 50 states and Canada. Fits GM V8 single point type distributors.Note: Not available for 6 cylinder.PX71181 1957-74 .............................. 132.99 ea

The Ignitor II electronic ignition goes an extra step beyond for even more power and effi ciency! It senses levels of current in the coil, and uses a powerful micro controller to adjust the dwell to maintain peak energy throughout the entire RPM range. As engine RPM and operating conditions change, dwell time is increased or decreased to provide more energy at higher RPM, reducing misfi res while improving engine performance. Ignitor II develops nearly 4 times more available energy between 3000 and 5000 RPM, and double the available plug voltage! The Ignitor II’s higher RPM performance is maximized when used with the new Flame-Thrower II super low resistance (0.6 Ohms) 45,000 Volt coil, but the system is compatible with any induction coil. It comes with a 30-month warranty and is emissions legal in all 50 states and Canada!6 CylinderPX91162 1963-74 6 cylinder .......... 113.99 set 8 Cylinder with Hall-Effect Style SensorPX91181 1957-74 8 cylinder .......... 111.99 set

Pertronixby

Performance Ignition

Performance Ignition

Performance CoilComplete your ignition upgrade with a Flame-Thrower high-performance coil. Best when used with the Ignitor Electronic Ignition Conversion, the Flame-Thrower high-performance coil fi ts existing coil brackets for a clean, factory look. Enables larger plug gaps for greater fuel effi ciency and more power. Available with either a chrome or black fi nish. Choose from a variety of voltages and primaryresistance ratings.

40,000 Volt Coil – 1.5 & 3.0 OhmThese Flame-Thrower coils are compatible with breaker point ignition systems or vehicles equipped with the original Ignitor system. Choice of 6 or 8 cylinder.Chrome Oil FilledPX40501 6 cylinder 3.0 Ohm ........... 40.99 ea PX40001 8 cylinder 1.5 Ohm ........... 35.99 ea Black Oil FilledPX40511 6 cylinder 3.0 Ohm ........... 31.99 ea PX40011 8 cylinder 1.5 Ohm ........... 31.99 ea Black Epoxy FilledPX40611 6 cylinder 3.0 Ohm ........... 44.99 ea PX40111 8 cylinder 1.5 Ohm ........... 44.99 ea

45,000 Volt Coil – 0.6 OhmThe Flame-Thrower II coils are for use on vehicles equipped with the Ignitor II system. Chrome Oil FilledPX45001 4, 6, or 8 cylinder .................. 39.99 ea Black Oil FilledPX45011 4, 6, or 8 cylinder .................. 38.99 ea Black Epoxy FilledPX45111 4, 6, or 8 cylinder .................. 49.99 ea

45,000 Volt Coil – 0.32 OhmThe Flame-Thrower III coils are for use on vehicles equipped with the Ignitor III system. Chrome Oil FilledPX44001 8 cylinder ......................... 49.99 ea Black Oil FilledPX44011 8 cylinder ......................... 39.99 ea

50,000 Volt HEI CoilAn optimized winding design to maximize spark gap current and available voltage. When teamed with the Flame-Thrower module, they produce 100% more energy across the spark plug gap compared to the OEM coil. Select the matching Flame-Thrower module for your application to create a proven performance combo!Note: Replaces OEM coils with the same color wires listed. HEI In-cap Mounted CoilPX3000 black/yellow/red wire ............ 46.99 ea PX3001 black/white/red wire .............. 50.99 ea HEI Remote Mounted CoilPX3002 1985-95 ................................. 50.99 ea

PX3002PX3000

HV 60,000 Volt CoilThe Flame-Thrower HV (high voltage) coil have an E-Core design which is rated at a sizzling 60,000 Volts and operates with no degradation of energy throughout the temperature ranges. Made from 6063-T5 aluminum, it effi ciently transfers heat to optimize energy output, and the housing is black anodized for increased corrosion resistance. Available in 3 different resistances for compatibility with most points and electronic ignition systems. Standard threaded connections and mounting hardwareare included.PX60104 0.45 Ohm ........................... 82.99 ea PX60115 1.5 Ohm ............................. 78.99 ea PX60130 3.0 Ohm ............................. 82.99 ea

PX45001 PX45011

Ignition ModulesThese performance ignition modules are direct replacements for GM computer controlled distributors. These modules provide enhanced high RPM performance and increase spark plug voltage when used with a correspondingFlame-Thrower coil.Pertronix Flame-Thrower ModulesPX2000 1974-88 4 pin, 6.9 amp ..... 48.99 ea PX20011 1980-91 7 pin, 6.0 amp ..... 59.99 ea PX20021 1987-91 8 pin, 6.0 amp ..... 57.99 ea Proform Modules66944C 1974-88 4 pin .................... 22.99 ea

PX20011

PX20021

HyperSpark CD Ignition BoxSniper EFI HyperSpark ignition box from Holley Performance. This box features a sealed and powder coated housing, and an external LED to verify 12V, cranking RPM, and low battery voltage. Its powerful 135MJ of spark ensure complete combustion and improved performance. Like the rest of the HyperSpark line of ignition products, this coil is designed to be“Plug and Play” with Sniper EFI Systems.H556151 all V8 ................................... 205.99 ea

KK

En

gin

es &

Co

mp

on

en

ts

503WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Performance Ignition

Performance Ignition

“Plug and Play”Billet Distributor“Plug and Play” billet distributors are designed for maximum ignition performance and easy installation, all at a price that you can afford. Replace your outdated points or electronic distributor with this performance proven distributor. These vacuum advance standard deck height distributors feature the patented Ignitor II electronics and a CNC-machined 6061-T6 billet housing. Fits Chevrolet small block or big block engines.Female TerminalsPX100700 black cap .. 235.99 ea PX100701 red cap ...... 235.99 ea Male TerminalsPX100710 black cap .. 235.99 ea PX100711 red cap ...... 235.99 ea

HEI DistributorHEI systems rely on a great module and a great coil. Available in machined or cast fi nishes. Operates without misfi res up to a minimum of 7500 RPM. That’s 3000 RPM higher than most enthusiasts report with their stock HEI. Produces 67% more energy in the coil, delivers twice the energy across the spark gap allowing wider plug gaps (.050-.055). 12-month limited warranty.Note: Please specify red, blue, or black cap when ordering.Chevrolet EnginesPX101 machined dist ... 248.99 ea PX102 cast distributor .. 205.99 ea Pontiac EnginesPX103 cast distributor . 246.99 ea

Billet Slip-Collar DistributorThese Flame-Thrower billet slip-collar distributors are designed to give maximum ignition performance and easy installation. Designed for small block or big block Chevrolet engines, these distributors provide all the features and benefi ts that the complete line of Flame-Thrower distributors offer. The slip-collar design fi ts either standard deck or tall deck applications.

D105810 black cap ...... 333.99 ea D105811 red cap .......... 333.99 ea

red

blue

black

Cast Stock Look DistributorThese Flame-Thrower distributors are disguised as stock point type distributors. Featuring a hardened precision ground gear with adjustable vacuum advance and a tailored advance curve, these distributors are built to last. Available with standard Ignitor ignition or with the high-performance Ignitor III high energy multi-spark module with adjustable RPM limiter. Includes brass contact high dielectric cap and rotor. 50 state legal.Made in USA.Note: Fits non-computer controlled small block and big block Chevrolet engines except 305 and “W series” 348 - 409. PX104600 w/Ignitor ..... 181.99 ea PX710460 w/Ignitor III 214.99 ea

Magnetic Trigger Billet DistributorThese magnetic triggering billet distributors for sb/bb Chevy engines contain a precision magnetic pickup coil and reluctor that produce a strong crisp signal even at extremely low RPM. The over molded pickup coil has excellent corrosion resistance and a standard Tyco mate plug for easy wiring. This distributor is compatible with most capacitive discharge and magnetically triggered ignition systems. Distributors have a mechanical centrifugal advance. Available with black or red caps.Note: Must be used with an ignition box.Not legal for use on pollutioncontrolled vehicles. PX300810 black cap .. 232.99 ea PX300811 red cap ...... 232.99 ea

HEI Distributor Tune-Up SetPerk up the performance of your stock Chevrolet HEI distributor! These sets include: a street/strip 4 pin module and coil combination, rotor and cap, coil cover, adjustable vacuum advance canister, high-performance advance set, wire harness with capacitor, and hardware.Note: For use on Chevrolet V8 with a red/yellow coil wire.Pertronix Flame-Thrower SetPX8000 black cap ... 127.99 set PX8001 red cap ...... 127.99 set PX8002 blue cap ..... 127.99 set Proform Set66945BKC black cap ... 76.99 set 66945RC red cap ...... 77.99 set 66945BC blue cap ..... 79.99 set

66945BKC

PX300811

PX100711

Performance Advance Curve SetThis Performance Advance Curve Set features precision machined chromoly weights and center plate to eliminate erratic timing. Three sets of springs, guide bushings, and complete installation instructions make recurving your distributor easy.66948C ........................... 8.99 ea

HEI Cap and Rotor Set66947BC blue .............. 24.99 set 66947BKC black ............ 27.99 set 66947RC red ............... 31.99 set

HEI High Power Distributor Coil SetGet this 50,000 Volt high power distributor set in your choice of colored caps.66942B w/blue cap ..... 49.99 set 66942BK w/black cap ... 49.99 set 66942R w/red cap ...... 49.99 set

66947BKC

66942R

HEI Wire Harness and CapacitorWhen upgrading your distributor, don’t overlook this essential component.66946C .......................... 17.99 ea

D105810

PX710460

Cap and Rotor SetCap and rotor set for 8 cylinder Flame-Thrower billet distributors. Made from high-performance 60 KV rated alkyd molding compound for superior protection from “arc through” and cross fi re. Includes rotor and rotor hold down screws. Available with male or female terminals in either black or red.Black Cap and Rotor SetsD600700 female terminals 31.99 set D600710 male terminals .. 39.99 set Red Cap and Black Rotor SetsD600711 male terminals .. 46.99 set D600701 female terminals 31.99 set

D600711

HyperSpark DistributorSniper EFI HyperSpark distributor from Holley Performance. This high-performance billet aluminum distributor features a unique “noise free” Hall-Effect crank trigger with a welded shutter wheel for years of reliable, accurate service. Hall-Effect triggers provide a clean RPM signal required for EFI systems like the Sniper EFI. This distributor makes adding timing control to a Sniper EFI system a “Plug and Play” procedure. Includes wire retainer and a patented clear installation capfor an easy installation.H565300 SBC/BBC ...... 257.99 ea

H565304

Dual Sync DistributorHolley EFI Dual Sync distributor for small and big block Chevrolet engines. These high-quality “Plug and Play” distributors are constructed of CNC-machined billet aluminum and come with a hardened steel distributor gear. They feature Hall-Effect sensors for cam and crankshaft position for sequential fueling operation. The precision machined shutter wheel ensures an accurate RPM signal well beyond 8000 RPM. Designed for simple “Plug and Play” installation with HolleyEFI systems.H565200 SBC/BBC ...... 373.99 ea H565204 tall deck BBC 373.99 ea

H565200

En

gin

es &

Co

mp

on

en

ts

504

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.govIgnition Wires

Ignition Wires

1967-74 Date Coded Spark Plug Wire SetClassic Industries® stocks reproductions of the original style Delco Packard plug wires used with 1967-74 Firebird models. Each wire includes the original style lettering with the wording Packard TV R Suppression. All wires are date coded based on the production quarter of the vehicle. “1Q” indicates the fi rst half of the production model year and “3Q” indicates the 2nd half of the production year. Wiring sets are produced for Firebird models with original exhaust manifolds. Note: These are not for use with after market type headers or aftermarket manifolds. Wiring may be applicable for use with other manifolds or headers but are not guaranteed to fi t. 3Q dated plug wires may be correct for use on vehicles manufactured in the fi rst months of the succeeding years production. *Without unitized distributor.2026663 1967 L6-OHC 3-Q-66 65.99 set 2026671 1967 L6-OHC 1-Q-67 75.99 set 2352663 1967 V8 with AC 3-Q-66 74.99 set 2352671 1967 V8 with AC 1-Q-67 74.99 set 2350663 1967 V8 w/o AC 3-Q-66 74.99 set 2350671 1967 V8 w/o AC 1-Q-67 74.99 set 2026673 1968 L6-OHC 3-Q-67 65.99 set 2026681 1968 L6-OHC 1-Q-68 65.99 set 2354673 1968 V8 with AC 3-Q-67 74.99 set 2354681 1968 V8 with AC 1-Q-68 74.99 set 2354681 1968 V8 w/o AC 3-Q-67 74.99 set 2354681 1968 V8 w/o AC 1-Q-68 74.99 set 2026683 1969 L6-OHC 3-Q-68 65.99 set 2026691 1969 L6-OHC 1-Q-69 65.99 set 2354683 1969 V8 with AC 3-Q-68 74.99 set 2354691 1969 V8 with AC 1-Q-69 74.99 set 2354683 1969 V8 w/o AC 3-Q-68 74.99 set 2354691 1969 V8 w/o AC 1-Q-69 74.99 set 36435 1970 L6 3-Q-69 55.99 set 36436 1970 L6 1-Q-70 55.99 set 2354693 1970 V8 3-Q-69 74.99 set 2354701 1970 V8 1-Q-70 74.99 set 36437 1971 L6 3-Q-70 55.99 set 36438 1971 L6 1-Q-71 55.99 set 2360703 1971 V8, 455ci HO 3-Q-70 74.99 set 2360711 1971 V8, 455ci HO 1-Q-71 74.99 set 2362703 1971 V8, w/o 455 3-Q-70 74.99 set 2362711 1971 V8, w/o 455 1-Q-71 74.99 set 36439 1972 L-6 3-Q-71 55.99 set 36440 1972 L-6 1-Q-72 55.99 set 2364713 1972* V8 3-Q-71 74.99 set 2364721 1972* V8 1-Q-72 74.99 set 36441 1973 L6 3-Q-72 55.99 set 36442 1973 L6 1-Q-73 55.99 set 2364723 1973* V8 3-Q-72 74.99 set 2364731 1973* V8 1-Q-73 74.99 set 36443 1974 L6 3-Q-73 55.99 set 36444 1974 L6 1-Q-74 55.99 set 2364733 1974* V8 3-Q-73 74.99 set 2364741 1974* V8 1-Q-74 74.99 set

Includes correct coded production dates!Available from 1967-74includes correct Packard TV R Suppression markingsOffi cially Licensed by General Motors

1974-02 Spark Plug WiresSpark plug wires are a major component in the vehicles ignition system. Electrical failure can be greatly hastened by loose connections at the ignition coil(s), distributor, or spark plugs causing telltale corrosion at connectors. Over time this loosening can develop from quality variations in the wires themselves, or through normal engine vibration. Other causes include retainer failure, fl uid leakage onto the wires causing the wires to swell and soften, or even poor original routing (too close to exhaust components or components with sharp edges). When these conditions exist, and they may or may not cause a noticeable misfi re, the wires must be replaced immediately, or they will wreak havoc on other components such as ignition coils and nearby electronics, or exhaust system components such as oxygen sensors and catalytic converters. These replacement wires are tailored to fi t your specifi c application.6 CylinderQW821 1977-79 231 .................... 28.99 set QW833 1980-81 231-A ................ 28.99 set QW923 1990-92 3.1-T ................. 26.99 set QW795 1993-95 3.4-S ................. 24.99 setQW1123 1995-99 3.8-K ................. 24.99 set QW1375 2000-02 3.8-K ................. 29.99 set 8 CylinderQW806 1974-76 all ...................... 34.99 set QW806 1977 350-R ................ 34.99 set QW806 1977-79 301-Y ................ 34.99 set QW806 1976-79 400-Z ................ 34.99 set QW806 1979-80 301-W ............... 34.99 set QW823 1977-78 305-U ................ 31.99 set QW823 1978-79 350-L ................ 31.99 set QW823 1979 305-G ................ 31.99 set QW925 1980 305-H ................ 19.99 set QW893 1985-86 5.0-F ................. 37.99 set QW892 1987-88 5.0 and 5.7 ........ 37.99 setQW986 1993 5.7 ..................... 52.99 set QW1066 1994-95 5.7 ..................... 68.99 set QW1117 1996-97 5.7 ..................... 69.99 set QW1219 1998-02 5.7 ..................... 51.99 set

1982-89 Delco Spark Plug Wire SetThe replacement Delco spark plug wires are a service replacement product and do not include the original style lettering or date codes. Each spark plug wire will replace your original to help keep your vehicle running smoothly.D650 1982-83 2.5-F (LQ8), -2 (LL1) 36.99 set D651 1984-86 2.5-2 (LQ9) ................ 33.99 set D653 1982 5.0-7 (LV5) ................ 50.99 set D654 1982-86 5.0-H (LG4) ............... 46.99 set D654 1983-86 5.0-G (L69) ................ 46.99 set D655 1987 5.0-F, H (LG4) ........... 48.99 set D655 1987 5.7-8 ........................... 48.99 set D656 1985-89 2.8-S (LB8) ................ 41.99 set

Custom Fit for Your Application!7.0mm to Fit Original Wiring Looms!Plain Black Wires w/o Script for a Stock Look!Hi-Temp Silicone Jackets!

Limited Lifetime

Warranty

7mm Spark Plug WiresThese Flame Thrower high-performance spark plug wires were created with the classic car in mind. They are manufactured in original 7mm size jackets to fi t stock wiring looms. With no markings or script of any kind on the wire, they maintain a stock appearance yet give you all the benefi ts of a high-performance wire set including: 2 current paths spiral wound stainless steel alloy winding and carbon impregnated fi berglass center core, low 500 Ohm per foot resistance, silicone jackets to resist high temperatures, moisture, oil and chemicals. They also have EPDM rubber inner insulation for superior heat resistance and prevention of arcing and voltage leaks. Fiberglass reinforcing braid is added for strength and fl exibility. Lifetime Warranty. Made in USA.PX706101 1967-74 6 cylinder all .... 49.99 set PX708102 1967-74 Pontiac V8 ....... 48.99 set

PX706101

QW892

QW795

OEM Style Spark Plug Sets Designed to Replace the Original Plug Wires for

1974-02 Firebird Models.

KK

En

gin

es &

Co

mp

on

en

ts

505WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov Ignition Wires

Ignition Wires

Thunder Volt 8.2 Ignition WiresTaylor Thunder Volt 8.2mm ignition wires are dyno-tested and proven to increase horsepower and torque. Designed with a ferrite spiral wound core coated with a blend of copper/nickle bonded with a conductive acrylic cover for only 40 Ohms per foot of resistance with optimum RFI and EMI suppression. A 2 layer 100% Zimplex silicone outer jacket for heat protection up to 600 degrees. Available in black, red, or blue with grey silicone spark plug boots. Universal wire sets include both standard socket and HEI boots with the appropriate terminals. Made in USA.

Universal Fit 8 Cylinder Sets A970101K black 90° boots .............. 75.99 set A970101R red 90° boots .............. 75.99 set A970101B blue 90° boots .............. 76.99 set A970102K black 135° boots ............ 70.99 set A970102R red 135° boots ............ 77.99 set A970102B blue 135° boots ............ 67.99 set A970103K black 180° boots ............ 67.99 set A970103R red 180° boots ............ 77.99 set A970103B blue 180° boots ............ 77.99 set Custom Race Fit Over Valve Cover SetsSmall Block Chevy A970105K black HEI & 90° boots .. 69.99 set A970105R red HEI & 90° boots .. 62.99 set A970105B blue HEI & 90° boots .. 77.99 set

Custom Race Fit Under Header WireSmall Block Chevy A970107K black HEI & 90° boots .. 62.99 set A970107R red HEI & 90° boots .. 65.99 set A970107B blue HEI & 90° boots .. 83.99 set

Thunder Volt 50 Ignition WiresTaylor Thunder Volt 10.4mm ignition wires are dyno-tested and proven with increases up to 5 horsepower and 7 pounds of torque. Designed with a ferrite spiral wound core coated with a blend of copper/nickel bonded with a conductive acrylic cover to provide low resistance at only 40 Ohms per foot with optimum RFI and EMI suppression. Features a tightly woven heat treated fi berglass braid and a 3 layer 100% Zimplex silicone outer jacket for heat protection up to 600 degrees with a 102,000 Volt dielectric strength. Available in black with gold lettering and low profi le color coordinated silicone boots. Universal wire sets include both standard socket and HEI boots with the appropriate terminals. Made in USA.

Universal Fit 8 Cylinder Sets A9720010 90° boots .......................... 123.99 set A9720011 135° boots ........................ 147.99 set A9720012 180° boots ........................ 144.99 set Custom Race Fit Over Valve Cover SetsSmall Block Chevy A9720014 HEI & 90° boots............... 118.99 set Pontiac V8 A9720017 socket & 135° boots ......... 142.99 set A9720018 HEI & 135° boots............. 121.99 set

Custom Race Fit Under Header WireSmall Block Chevy A9720016 HEI & 90° boots............... 134.99 set

Custom Fit Model Specifi c Sets A9720021 1993-97 5.7L LT1 ....... 137.99 set A9720022 1999-02 5.7L LS1 ....... 78.99 set

409 Pro Race Ignition WiresTaylor 409 Pro Race 10.4mm high-performance ignition wires are designed for street and track performance. Featuring tightly woven heat treated fi berglass braid over a 100% silicone Spiro-Pro ignition wire providing a 3 layer jacket these wires have a 102,000 Volt dielectric strength and thermal protection to 600 degrees. The spiral wound core with 350 Ohm resistance per foot has excellent EMI and RFI suppression making them perfect for extreme electronic ignition systems. Available in black, red, and blue with low profi le silicone Pro Boot spark plug boots. Universal wire sets include both standard socket and HEI boots with the appropriate terminals. Made in USA.

Universal Fit 8 Cylinder Sets A970112K black 90° boots .................. 118.99 set A970112R red 90° boots .................. 111.99 set A970112B blue 90° boots .................. 115.99 set A970113K black 135° boots ................ 116.99 set A970113R red 135° boots ................ 116.99 set A970113B blue 135° boots ................ 119.99 set A970114K black 180° boots ................ 123.99 set A970114R red 180° boots ................ 110.99 set A970114B blue 180° boots ................ 121.99 set Custom Race Fit Over Valve Cover SetsSmall Block Chevy A970116R red HEI & 90° boots ...... 110.99 set A970116B blue HEI & 90° boots ...... 99.99 set Pontiac V8 A970119R red socket & 135° boots 120.99 set A970119B blue socket & 135° boots 131.99 set A970120R red HEI & 135° boots .... 106.99 set A970120B blue HEI & 135° boots .... 118.99 set

Custom Race Fit Under Header WireSmall Block Chevy A970118R red HEI & 90° boots ...... 104.99 set A970118B blue HEI & 90° boots ...... 125.99 set

Custom Fit Model Specifi c Sets1993-97 Wire Sets A970123R red 5.7L LT1 .................. 119.99 set A970123B blue 5.7L LT1 .................. 117.99 set 1999-02 Wire Sets A970124R red 5.7L LS1 .................. 63.99 set A970124B blue 5.7L LS1 .................. 68.99 set

1974-90 SST Shielded Ignition WiresTaylor SST Shielded 8mm wires complement any engine with chrome, polish, or braided lines. A spiral wound conductor layered in two layers of a synthetic silicone blend jacketed with a braided tin coated copper cover and blue silicone boots offers protection up to 550 degrees.Note: Installation requires the use of an included grounding kit.

Small Block ChevyOver Valve Cover Wires A9720024 1974-80 HEI & 90° boots ..... 76.99 set A9720025 1974-90 HEI & 135° boots ... 79.99 set A9720026 1978-86 HEI & 90/180° boot 80.99 set

Pontiac V8Over Valve Cover Wires A9720029 1964-75 socket & 135° boots 80.99 set

A970105B

A970101K

A9720017

A970114R

A970120B

A9720025

En

gin

es &

Co

mp

on

en

ts

506

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.govWire Accessories

Ignition Wire Accessories

Valve Cover Spark Plug Wire RetainersReproduced exactly as original. The V8 set includes 4 insulated metal retainers which attach to valve covers using the lower valve cover bolts and also the hard plastic separators for other locations between the spark plugs and the distributor. The 400 CID set includes the correct retainers which attach to the valve covers, as well as the spark plug to distributor clips. Each set includes the correct amount of retainers.K0087 1967-74 400 CID ................ 11.99 set

Chrome Wire LoomsBeautifully chromed, heavy gauge steel with easy snap in grommets eliminates the need for removing wires for quick installation.T9097 Hi Lift, 4 hole two 5-1/4" .......... 5.99 prT4009 standard, 4 hole two 3-3/4" ....... 3.99 pr

T9097

PY123

PY124A

PY126

1967-79 Spark Plug Retainer SetReproduction spark plug retainer sets for 1967-79 Firebird models. These quality reproductions will have your engine ignition wires organized just like they came from the factory. These are designed for specifi c applications for correct wire routing.PY123 1967 without AC ......... 31.99 set PY123A 1967 with AC .............. 44.99 set PY124 1968-69 without AC ......... 78.99 set PY124A 1968-69 with AC .............. 78.99 set PY470F 1970 all ........................ 69.99 set PY126 1975-79 HEI ..................... 54.99 set

1979 Trans Am Valve Cover Wiring ClipKeep your wiring secured to the valve covers with this wiring bracket/strap clip.TA4033 1979 ......................................... 7.99 ea

Clamp Style Wire SeparatorsOrganize your engine bay with Taylor clamp style wire separators manufactured from non-conductive type 6/6 nylon that won’t melt, distort, fade, or crack. Sets include: two 4 wire separators, two 3 wire separators, and two 2 wire separators. Available in four different colors. Stainless steel hardware included.7-8.2mm Wire Separators A970125C chrome ............................. 11.99 set A970125K black ................................ 14.99 set A970125R red .................................... 15.99 set A970125B blue .................................. 14.99 set 10.4mm Wire Separators A970126K black ................................ 14.99 set A970126R red .................................... 16.99 set A970126B blue .................................. 15.99 set

A970125C

A970126R

A970125B

1967-68 Wire Loom HolderThis metal strip runs across the left side valve cover on 1967-68 models with AC. It is designed to secure engine wiring when its metal tabs are folded over. A8700107 1967-68 .............................. 14.99 ea

1967-74 Spark Plug Wire SeparatorThese plastic spark plug wire separators keep the wires organized and prevent cross talk between wires. Available individually or as a 4 piece set with two 2 wire separators and two 4 wire separators.Note: Not for HEI applications. A8700109 1967 4 wire VC mount .. 2.99 ea A8700110 1967 3 wire triangle ...... 3.99 ea A8700111 1967-74 2 wire ................... 1.49 ea A8700112 1967-74 4 wire ................... .99 ea A8700113 1971-74 4 piece set ............. 6.99 set

A8700110

1968-81 Wiring Harness BracketsThese brackets attach to the valve cover bolts on the front and rear of the engine on vehicles with factory AC. Designed to secure the engine wiring harness to keep the engine bay uncluttered. A8700108 1968-81 ............................ 11.99 pr

T4009

KK

En

gin

es &

Co

mp

on

en

ts

507WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Ignition Wire Accessories

Wire Accessories

Spark Plug Wire Separator SetThis set of spark plug wire separators is made from high grade plastic which helps insulate the plug wires and reduce shorts and crosstalk. Includes: two 4 wire separators, two 3 wire separators, and two 2 wire separators. MN2417 V8 .......................................... 2.99 set

Spark Plug Wire Support and Separator SetThese high grade chrome-plated plastic support brackets attach to the valve cover bolts or studs to route the plug wires neatly from the distributor, over the valve covers, and to the plugs. Keeps wires away from hot underhood parts, insulates the plug wires, and reduces shorts and crosstalk. Includes: four chrome support brackets, two 3 wire separators, and four 2 wire separators, as shown above. MN2418 V8 ........................................... 5.99 set

Spark Plug Hole Thread ChaserCleans and threads directly in the spark plug hole! Double ended for both 14mm and 18mm threads. Use with 13/16" spark plug socket.Y20200 ................................................... 6.99 ea

TT14200

Spark Plug Wire Heat ShieldThis heat shield offers spark plug wires and boots the ultimate protection from conductive and radiant heat. The dual purpose sleeving has an aluminized outer surface that refl ects 90% of radiant heat, up to 2000 degrees F, with a formulated silica-based fabric inside that prevents conductive heat from penetrating. TT14200 two 6" x 1-1/2" .................. 15.99 pr TT14250 four 6" x 1-1/2" .................. 31.99 set

Spark Plug GapperGauges and gaps all types of spark plugs from 0.20" to .100" (.50mm to 2.53mm). Includes tapered edge for gauging spark plugs. Specially designed hole with fl ange adjusts side wire of plug without pressuring center electrode.Y67870 ................................................. 2.49 ea

Spark Plug Wire TesterWhen you want to quickly locate faulty plug wires, you need this tester. Now you can check spark plug wires without piercing or ruining the wires. If the light fl ashes, you have a sound and intact wire. If not it’s time to replace. Y26900 ................................................. 9.99 ea

Spark Plug Wire PullerRemoves spark plug wire boots from plugs with minimal effort. Designed for use on most cars and trucks. Y51250 .................................................. 8.99 ea

Spark Plug Terminal PliersSafely removes spark plug cables. Prevents damage to cables when replacing. The handles and jaws are coated with heavy plastic for a sure grip.X135 .................................................. 12.99 ea

Pro-Clamp Spark Plug Wire SeparatorsThe MSD Pro-Clamp will keep the plug wires in a tidy order and away from engine heat sources. Each separator features secure grooves for each wire and a top bracket snaps in place to sandwich the wires in place. Each base has a hole for a retaining screw if desired and a tab that will help hold it in position. The set is supplied with: two 4 wire separators, two 3 wire separators, and four 2 wire separators. 8843 .................................................... 24.99 set

installed view

TT14263

Plug Wire SleevesEasy-to-install Cool It nonfl ammable plug wire sleeves can be used in any temperature environment from street vehicles to race cars. Enhance performance, reduce misfi res and extend plug wire life! Will not react with petroleum products. The double wall construction keeps the wire and boot cooler in a high temperature engine. Universal size fi ts most boots. TT14262 black 4 piece ................. 29.99 set TT14261 red 4 piece ................. 29.99 set TT14263 blue 4 piece ................. 29.99 set TT14260 silver 4 piece ................. 29.99 set

TT14250

En

gin

es &

Co

mp

on

en

ts

508

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Distributors

Distributors

1967-97 Remanufactured DistributorClassic Industries® offers a full line of distributors for your Firebird. If your Firebird is having problems starting, has a rough idle or the performance is not what it use to be, it could be time to change your distributor. Each distributor is remanufactured and tested to guarantee you get the best quality distributor your money can buy.Note: Distributor cap and rotor not included.6 Cylinder EnginesD1621 1967 230 with sngl vac ....... 123.99 ea D1621 1968-69 250 with sngl vac ....... 123.99 ea D1612 1970 250 .............................. 76.99 ea D1637 1971-74 250 .............................. 169.99 ea D1692 1975-76 250 .............................. 88.99 ea D1693 1977 231 w/“Odd-Fire” dist 98.99 ea D1694 1977 231 w/even fi re dist .... 84.99 ea D1694 1978-81 231 with sngl vac ....... 84.99 ea D1671 1980-81 231 without vac .......... 95.99 ea D1631 1982-84 2.8 exc. Canada .......... 78.99 ea D1630 1982-84 2.8 Canada .................. 121.99 ea D1631 1985-86 2.8 w/carb. (VIN X) ... 78.99 ea D1633 1985-86 2.8 w/EFI (VIN,S,W,9) 108.99 ea D1633 1987-89 2.8 ............................... 108.99 ea D1633 1990-92 3.1 ............................... 108.99 ea 8 Cylinder EnginesD1851 1967 326, 400 w/sngl vac.... 105.99 ea D1851 1968-74 350, 400 w/sngl vac.... 105.99 ea D1851 1971 455 with sngl vac ....... 105.99 ea D1861 1972-74 400, 455 w/unitiz ign.. 131.99 ea D1890 1974 400, 455 w/HEI ign .... 108.99 ea D1890 1975-76 all ................................ 108.99 ea D1890 1977 301, 305 ...................... 108.99 ea D1895 1977-78 350 VIN L (Chevy) .... 100.99 ea D1893 1977-78 350 VIN R (Olds) ....... 103.99 ea D1890 1977 350 VIN P (Pontiac) ... 108.99 ea D1890 1977-79 400 .............................. 108.99 ea D1893 1977-79 403 .............................. 103.99 ea D1895 1978-79 305 .............................. 100.99 ea D1896 1978 350 VIN X (Buick) ..... 102.99 ea D1890 1979-80 301 .............................. 108.99 ea D1890 1980 265 .............................. 108.99 ea D1874 1980 301 w/high perf.(W72) 141.99 ea D1865 1980-81 305 without vac .......... 93.99 ea D1895 1980-81 305 with vac ............... 100.99 ea D1871 1981 265, 301 ...................... 112.99 ea D1865 1982-84 5.0 without vac ........... 93.99 ea D1895 1982-84 5.0 with vac ................ 100.99 ea D1867 1985-86 5.0 VIN code F ........... 142.99 ea D1865 1985-86 5.0 VIN G, H exc. Can 93.99 ea D1895 1985-86 5.0 VIN H Can ........... 100.99 ea D1830 1987 5.0 VIN F, H exc. Can 93.99 ea D1895 1987 5.0 VIN code H Can ... 100.99 ea D1830 1987-92 5.7 ............................... 93.99 ea D1830 1988-92 5.0 ............................... 93.99 ea D1832 1993-94 5.7 ............................... 219.99 ea D1803 1995 5.7 ............................... 199.99 ea D1833 1996-97 5.7 ............................... 249.99 ea

D1895D1692

D1865D1893

Pontiac HEI DistributorThis HEI distributor offers calibrated advance curves that are optimized for maximum combustion effi ciency and for the elimination of detonation damage and throttle ping. Assembled from precision-made parts for advance curve smoothness. Offers longer term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. Each unit includes a high power coil, a premium dielectric red cap with brass terminals and a rotor cap.66953 ............................................... 183.99 ea

Chevy V8 HEI Electronic DistributorAftermarket distributors in your choice of any high-performance color. Each distributor includes a coil and colored cap. For use with HEI V8 engines.Polished66941BC blue cap .... 108.99 ea 66941BKC black cap .. 108.99 ea 66941RC red cap ..... 108.99 ea Unpolished66941BKUC black cap .. 114.99 ea 66941TUC tan cap ...... 108.99 ea 66941BC

G6000 66940C

1977-97 New DistributorGet consistent spark for maximum effi ciency, accurate timing, and peak performance at all RPM ranges! Made from 100% new parts that meet and exceed OE specifi cations, each distributor and it’s components have been tested assuring quality and endurance that can be trusted. All distributors come complete with an OE quality distributor cap and rotor. For use in Chevrolet V8 engines. ND1008 1977-78 5.7L HEI w/vac. adv. 101.99 ea ND1008 1978-86 5.0L HEI w/vac. adv. 101.99 ea ND1004 1987-92 5.0L and 5.7L ........... 86.99 ea ND1022 1993-94 5.7L w/vented cap.... 149.99 ea ND1005 1995-97 5.7L .......................... 132.99 ea

ND1005ND1008

Chevy V8 HEI Electronic DistributorIf your HEI equipped Chevy V8 is having problems starting, has a rough idle or the performance is not what it use to be, it could be time to change your distributor. This distributor is specifi cally designed for 5.7L high output engines. This distributor may be used for most high-performance applications.With Cap and RotorG6000 black cap – GM .............. 175.99 ea 66940C brown cap – Proform ..... 113.99 ea Without Cap and Rotor66940WO Proform .......................... 78.99 ea

New Electronic Ignition DistributorThese distributors are an inexpensive replacement for worn out factory distributors and perfect for upgrading to electronic ignition. They are made from 100% new parts and include a high-quality distributor cap and rotor with brass contacts. EFI and HEI distributors feature heavy-duty chromoly gears and machine polished CNC-machined housings. HEI distributors also include a fully adjustable vacuum advance and a 65 KV ignition coil with a color matched cover that matches the distributor cap.Note: Gasket included.Pontiac V8 Engine HEI DistributorsA871001C 1967-80 with clear cap ... 59.99 ea A871001K 1967-80 with black cap .. 59.99 ea A871001R 1967-80 with red cap ...... 59.99 ea Oldsmobile V8 Engine HEI DistributorsA871002K 1977-79 with black cap .. 59.99 ea A871002R 1977-79 with red cap ...... 59.99 ea Chevrolet V8 Engine HEI DistributorsA871003B 1977-84 with blue cap .... 59.99 ea A871003C 1977-84 with clear cap ... 59.99 ea A871003K 1977-84 with black cap .. 59.99 ea A871003R 1977-84 with red cap ...... 59.99 ea Chevrolet V8 Engine EFI DistributorsA871004R 1987-91 with red cap ...... 61.99 ea Chevrolet V8 Engine Optispark DistributorsA871005K 1993-94 with black cap .. 81.99 ea A871006K 1995-97 with black cap .. 81.99 ea Replacement Optispark Wiring HarnessesA8700220 1993-94 Optispark harness 15.99 ea A8700221 1995-97 Optispark harness 15.99 ea

A871003CA871001K

HEI Battery and Tach PigtailWhen installing an HEI distributor or repairing a broken lead, don’t use single spade connectors that come loose. Use one of these positive locking HEI pigtails. Pigtails are available in both a dual connection single plug and dual single plug confi gurations. They both feature red and green wires for easy installation and connection to the distributor. 170072 single dual plug pigtail ............ 5.99 ea 170073 dual single plug pigtails .......... 3.99 pr

170072170073

KK

En

gin

es &

Co

mp

on

en

ts

509WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov Distributor Parts

Distributor Components

1970-76 Distributor Hold Down Clamp Correct clamp designed to hold the distributor housing assembly. For use with all 1970-76 L6 models.G9425 1970-76 .................................... 8.99 ea

1967-74 Distributor LeadThis is an original AC Delco replacement distributor lead. Replace your electrical components with AC Delco parts, you’ll be glad you did! 12338662 1967-74 Pontiac V8 .......... 6.99 ea

1974 Three Way Distributor Vacuum TeeThis original replacement 3 way tee is for use with 5/ 32" hoses and is for use with all 1974 V8 engines. G5135 1974 ............................................ 2.99 ea

1969 Distributor Vacuum Line Reproduction distributor vacuum lines for use with 1969 six cylinder models with overhead cam.FDV6906 1969 OEM material ....... 14.99 ea FDV6906S 1969 stainless material .. 18.99 ea

FDV6906S

Distributor StudThese premium grade studs, which are equipped with vibration resistant J-form threads, in your choice of black oxide fi nished chromoly or rustproof stainless steel. Select from conventional Hex or space saving 12 point nuts. Washers included.

Chevrolet EngineBlack OxideAR13172 Hex head ............................ 6.99 set AR13171 12 point .............................. 7.99 set StainlessAR43172 Hex head ............................ 9.99 set AR43171 12 point .............................. 11.99 set

Pontiac EngineBlack OxideAR19172 Hex head ............................ 8.99 ea AR19171 12 point .............................. 9.99 ea StainlessAR49172 Hex head ............................ 10.99 ea AR49171 12 point .............................. 11.99 ea

Distributor WasherThe distributor washer is an integral part in maintaining proper clearance between the gear and housing assembly. Helps keep the shaft from shifting when properly installed. Recommended replacing when rebuilding. G6009 all 8 cylinder models ...... 25.99 ea

Distributor Clamp WrenchReach around obstructions to turn distributor lock nut with this double ended wrench. Fits 1/2" and 9/16" lock nuts. Use adapter to join wrenches together or attach to 3/8" ratchet or extension.X104 .................................................. 27.99 ea

TA4066 G9426

K0054

1967-82 Vacuum AdvanceThe vacuum advance is a mechanism attached to the distributor which moves the breaker point or pickup coil plate when it receives vacuum generated by the engine. Replace the vacuum advance in your 1967-82 Firebird model.Note: *Except high altitude.DV1465 1967-68 400 ........................... 11.99 ea DV1465 1968 350, 400 w/Ram Air 11.99 ea DV1465 1969-72 350, 400 with AT ..... 11.99 ea DV1465 1971-72 455 ........................... 11.99 ea DV1465 1973 400, 455 with AT ..... 11.99 ea DV1465 1973 350 with AT ............. 11.99 ea DV1465* 1973-74 400 w/2 barrel carb 11.99 ea DV1465* 1974 455 ........................... 11.99 ea DV1847 1977 350-R ...................... 17.99 ea DV1846 1977 301-Y ....................... 9.99 ea DV1859 1978 305-U dist. 1103282 14.99 ea DV1836 1978 305-U dist. 1103281 16.99 ea DV1847 1978-79 403-K ...................... 17.99 ea DV1874 1979 350-L ....................... 20.99 ea DV1859 1979 305-G dist. 1103282 14.99 ea DV1836 1979 305-G dist. 1103281 16.99 ea DV1861 1979 301 ........................... 14.99 ea DV1859 1982 5.0L-H ..................... 14.99 ea

DV1465

1977-79 Trans Am Distributor Hold DownReproduction distributor hold down clamp for 1977-79 Trans Am models with Olds 403. Secures the distributor to the engine block.TA4046 1977-79 Olds 403 .............. 12.99 ea

1967-81 Distributor GasketDistributor gaskets for 1967-81 Pontiac L6 and V8 models. Seals the engine block to the distributor base.TA4066 1967-81 4 barrel V8 ........... 3.99 ea G9426 1970-76 L6 ......................... 1.99 ea

1967-79 Pontiac Distributor ClampReplacement distributor hold down clamp for 1967-79 Pontiac V8 engines. Manufactured to factory specifi cations from heavy gauge steel to provide an identical replacement for lost or damaged clamps.Note: For Pontiac engines only. Will not work with Oldsmobile 403 engines.A8700192 1967-79 ............................... 9.99 ea

Vacuum Advance Metal TubeCorrect metal tube which fi ts onto the intake and hose. For use with aluminum intakes only. Mounting clips included. K0054A 400, 455 only ........................ 21.99 ea K0054 all except 400, 455 ................ 23.99 ea

1957-74 Distributor Wire GrommetThis grommet is used to insulate and hold the wire lead coming out of the distributor in place and help to seal out the elements.

TF700623 1957-74 ................................ 2.99 ea

DV1874

1968-69 Distributor Vacuum Control ValveThese vacuum control valves are part of the CCS emissions system on 1968 V8 models and 1969 Ram Air III models with manual transmission. These valves control the distributor’s vacuum retard and advance timing.Distributor Control Valve A8700102 1968 V8 with MT .......... 104.99 ea A8700102 1969 Ram Air III w/MT 104.99 ea Distributor Control Valve Cap A8100301 1968 V8 w/manual ......... 9.99 ea A8100301 1969 Ram Air III w/manual 9.99 ea

Chrome Vacuum Advance CoverChrome-plated steel cover that slides over factory vacuum advance units. Attaches with double sided tape. T4973 .................................................. 5.99 ea

A8700102

Vacuum Advance LockoutThis vacuum advance lockout mounts to the distributor and is used when switching from a vacuum advance to a mechanical advance.PX9010 clockwise dist ......................... 7.99 ea PX9011 counterclockwise dist ............. 6.99 ea

PX9010

HEI Adjustable Vacuum AdvanceThis adjustable vacuum advance canister allows you to optimize ignition advance for maximum part throttle performance and cruise speed effi ciency.66952C ............................................... 17.99 ea

En

gin

es &

Co

mp

on

en

ts

510

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.govIgnition Components

Ignition Components

1967-86 GM Tune-Up PartsGenuine GM tune-up parts for a variety of applications. These are Genuine GM service replacement parts which may differ cosmetically from the originally installed part. Your choice of 6 cylinder or 8 cylinder models.Distributor CapsG7239 1967-74 6 cylinder ............ 9.99 ea G7240 1967-74 8 cylinder ............ 14.99 ea G7241 1974-85 8 cylinder, HEI ... 14.99 ea G7242 1985-86 305-F .................. 18.99 ea Rotor CapsG6010 1967-74 8 cylinder ............ 5.99 ea PointsD1060 1967-74 8 cylinder ............ 23.99 ea CondensersG6043 1967-74 8 cylinder ............ 7.49 ea Tune-up Kit – Points, Condenser, Rotor CapR303 1967-73 8 cylinder ............ 35.99 kit

G7241

DR2028GDR2003

DR2004G

G6043G6010

1967-92 Cap and Rotor SetsService replacement and premium quality cap and rotor sets. Caps and rotors feature solid brass or copper inserts for longer life and maximum resistance to corrosion and electrical pitting. Their high mineral content and glass reinforced molding compounds offer outstanding dielectric strength. Solid brass rotor blades with coating reduce radio interference.

Breaker Points Ignition SystemsService ReplacementsDR2027 1967-74 6 cylinder ....... 17.99 set DR2028 1967-74 8 cylinder ....... 19.99 set Premium Quality ReplacementsDR2028G 1967-74 8 cylinder ....... 20.99 set

HEI SystemsService ReplacementsDR2003 1975-77 6 cylinder ....... 24.99 set DR2004 1978-81 6 cylinder ....... 29.99 set DR2001 1974-87 8 cylinder ....... 29.99 set Premium Quality ReplacementsDR2004G 1978-81 6 cylinder ....... 42.99 set DR2001G 1974-87 8 cylinder ....... 36.99 set

Late Style Ignition SystemsService ReplacementsDR2008 1982-84 V6 2.8L .......... 20.99 set DR2012 1985-92 6 cylinder ....... 16.99 set DR2009 1985-86 5.0L-F ............. 26.99 set DR2015 1987-92 8 cylinder ....... 29.99 set Premium Quality ReplacementsDR2008G 1982-84 V6 2.8L .......... 24.99 set DR2012G 1985-92 6 cylinder ....... 19.99 set DR2009G 1985-86 5.0L-F ............. 34.99 set DR2015G 1987-92 8 cylinder ....... 31.99 set

DR2004

1974-97 Control Modules for Electronic Ignition Vehicles

Note: Because of the many applications of control modules, use the photo to identify the module, or if you cannot identify by photo, call for more detailed application listings.OE Quality Control ModulesDR100 1974-80 8 cylinder ........ 19.99 ea DR100 1975-80 6 cylinder ........ 19.99 ea DR124 1980-81 6 cylinder ........ 29.99 ea DR124 1981-86 8 cylinder ........ 29.99 ea DR126 1982 4 cylinder ........ 29.99 ea DR126 1982-84 6 cylinder ........ 29.99 ea DR140 1985-92 6 cylinder ........ 34.99 ea DR140 1987-92 8 cylinder ........ 34.99 ea DR196 1993 8 cylinder ........ 107.99 ea DR174 1994-95 8 cylinder ........ 89.99 ea DR178 1996-97 8 cylinder ........ 74.99 ea

DR124

DR178

1967-74 Distributor PointIf you own a 6 cylinder Pontiac you may want to replace your original points with an authentic AC Delco points package. We offer these OEM points for your 6 cylinder Pontiac engine. G9138 1967-74 6 cylinder ............. 10.99 ea

1974-80 Control ModuleThis is an Genuine AC Delco distributor control module for the years and models listed below. G9137 1974-80 export .................... 38.99 ea

DR196

DR126

U1511 DR1077

1957-74 Points and CondensersService replacement points and condensers for Chevy models. The points sets feature a nickel-plated copper strip for higher conductivity. The condensers are double plated with precision windings, brass terminals and insulated multi-strand copper wire for optimum energy.Points Sets DR1077 1963-74 6 cylinder ............ 12.99 set DR1075 1957-73 8 cyl. (exc 454) ... 7.99 set DR1080 1957-73 8 cyl. (uni-set) ..... 15.99 set Condensers U1515 1962-74 4 or 6 cylinder ..... 3.99 ea U1511 1957-73 8 cylinder ............ 10.99 ea

1967-02 Replacement Ignition CoilService replacement and premium quality ignition coils for 6 and 8 cylinder engines. These oil fi lled coils feature an increased number of wire windings for greater output voltage and a heavy-duty insulator for longer life. Double outer laminations create a stronger magnetic fi eld for higher output voltage and spark energy. Available for breaker points ignition, HEI and late style ignition.

HEI SystemsService ReplacementsC833 1978-92 red, white, blk wires 17.99 ea C834 1977-86 red, yellow,blk wires 16.99 ea

Late Style Ignition SystemsService ReplacementsC846 1987-95 6 and 8 cylinder ....... 19.99 ea C1098 1996-97 8 cylinder ................. 34.99 ea C849 1993-02 6 cylinder (3 req.) .... 19.99 ea C1144 1998-02 8 cylinder (1 per cyl) 57.99 ea

C846

C833

C1098

1967-74 Chrome Ignition CoilReplacement chrome ignition coil is just what you’ll need to keep your electrical system operating effi ciently. This is a 60,000 Volt coil.T9324 1967-74 .................................... 68.99 ea

Distributor Clamp WrenchReach around obstructions to turn distributor lock nut with this double ended wrench. Fits 1/2" and 9/16" lock nuts. Use adapter to join wrenches together or attach to 3/8" ratchet or extension.X104 ................................................. 27.99 ea

KK

En

gin

es &

Co

mp

on

en

ts

511WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov Ignition Components

Ignition Components

1967-92 Spark Plugs Accel’s patented race proven spark plugs are now available in a “shorty” confi guration. The overall length of each plug has been reduced 1/4" to 3/8" (depending on the specifi c spark plug) to gain critical air gap space between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install and remove the spark plugs in certain applications where there is not a lot of room to work with a socket or wrench. Note: Standard header plugs are sold in sets of 8. P526S double platinum plugs are sold individually.Pontiac 8 Cylinder 8197 1967 326.......................... 36.99 set 8197 1968-70 350 2 barrel ............ 36.99 set 8197 1968-70 400 RA ................... 36.99 set 8197 1970 400 exc RA ............. 36.99 set 8199 1972-76 400 4 barrel ............ 36.99 set 8199 1972-76 455.......................... 36.99 set 8199 1975-76 350 4 barrel ............ 36.99 set 8199 1977 350 (P) .................... 36.99 set 8199 1977-79 350 (L) ................... 36.99 set 8199 1977-79 400 (Z) ................... 36.99 set 8199 1978-79 301 4 barrel (W) ..... 36.99 set 8199 1979-80 350 (X) ................... 36.99 set 8199 1980-81 265 (S) .................... 36.99 set 8199 1980-81 301 (T, W) .............. 36.99 set 8199 1981 267 (J) .................... 36.99 set Chevrolet 8 Cylinder 8199 1977-81 305 (7, G, H, S) ...... 36.99 set 8198 1985 305 TPI (F) ............. 43.99 set 8198 1986 305 (G) ................... 43.99 set 8199 1986 305 (H) ................... 36.99 set 8198 1986-87 305 TPI (F) ............. 43.99 set 8198 1986-87 350 iron heads (8) .. 43.99 set 04164S * 1986-87 350 alum heads (8) 29.99 set 8199 1988-92 305 (E, F) ............... 36.99 set 8199 1988-92 350 (8) .................... 36.99 set

1967-02 Spark PlugsWant to unlock more power from your engine and actually burn less gas? Through an intensive R&D process, E3 has created a spectacular new spark plug that creates the industry’s fastest spark growth and fastest combustion pressure rise, meaning it burns fuel more effi ciently to give you more power and increased fuel economy. E3’s patented design forces the spark discharge from one sharpened edge to another, and projects the spark forward into the combustion chamber, unlike traditional spark plugs, for the most consistent, powerful and effi cient burn possible! Sold individually.Pontiac 6 Cylinder E3346 1967 230 I6 ................... 6.99 ea E3346 1968-69 250 I6 ................... 6.99 ea E3342 1970-71 250 I6 ................... 6.99 ea E3341 1972-75 250 I6 ................... 6.99 ea E3342 1976 250 I6 ................... 6.99 ea E3342 1977-79 231 V6 .................. 6.99 ea Pontiac 8 Cylinder E3352 1967 326........................ 6.99 ea E3352 1968-70 350........................ 6.99 ea E3352 1968-71 400........................ 6.99 ea E3352 1971 350 2 barrel .......... 6.99 ea E3342 1971 350 4 barrel .......... 6.99 ea E3352 1971 455........................ 6.99 ea E3342 1972-76 455........................ 6.99 ea E3342 1972-79 350........................ 6.99 ea E3342 1972-79 400........................ 6.99 ea E3352 1977-79 403 Olds ............... 6.99 ea E3342 1977-81 301........................ 6.99 ea Chevrolet 6 Cylinder E3341 1982-89 2.8L V6 ................ 6.99 ea E3341 1990-92 3.1L V6 ................ 6.99 ea E3342 1993-95 3.4L V6 ................ 6.99 ea E3344 1995-02 3.8L V6 ................ 6.99 ea Chevrolet 8 Cylinder E3342 1977-84 305........................ 6.99 ea E3341 1985 5.0L FI .................. 6.99 ea E3342 1985 5.0L carb .............. 6.99 ea E3341 1986 5.0L ...................... 6.99 ea E3341 1987 5.7L iron heads ..... 6.99 ea E3348 1987 5.7L alum heads ... 6.49 ea E3342 1987-92 5.0L ...................... 6.99 ea E3342 1988-92 5.7L ...................... 6.99 ea E3362 1993 5.7L ...................... 6.99 ea E3344 1994-97 5.7L ...................... 6.99 ea E3354 1998-02 5.7L ...................... 6.99 ea

1/4" to 3/8"Shorter

Coil Bracket BoltAdd a touch of class to your coil bracket installation with an ARP bolt. Available in black oxide fi nished chromoly or rustproof stainless steel, as well as with a conventional Hex head or compact 12 point (great for use with those coils mounted in tight, hard to reach places). Washers included.AR13232 black oxide Hex head ....... 5.99 set AR13231 black oxide 12 point ......... 5.99 set AR43232 stainless Hex head ....... 9.99 set AR43231 stainless 12 point ......... 9.99 set

Calibrated Ignition TesterAccurately check for spark in ignition systems without removing the spark plugs from the engine. Testers verify that energy from the spark plugs are efficient to fire. Attach the spark plug wire to tester end, clamp tester to engine as ground, then crank the engine and test for spark. It’s easy and fast!X2756 HEI ignition tester .................. 10.99 eaX2757 standard ignition tester ........... 10.99 ea

X2756 X2757

AR43232

1955-75 Coil Holder BracketThis coil holder bracket is available manufactured in zinc- or chrome-plated steel. Will fi t all 1955-75 small block or big block engines without HEI. Cinch bolt included.OE Style Reproduction1970344 1955-75 zinc-plated .......... 17.99 ea Aftermarket StyleT9366 1955-75 chrome-plated ..... 4.99 ea

E276 T9366

Deluxe Feeler GaugesFeeler gauge set consists of 31 blades, including a brass 0.010 blade for use on electronic ignitions. Precision blades ensures accurate measurement. Blades from 0.0015" to 0.035" (0.038mm to 0.889mm) are approximately 1/2" x 3-1/2". Y68100 ................................................. 7.99 set

Brass Non-MagneticFeeler GaugesIncludes 6 brass blades, 0.006" to 0.016". This non-magnetic feeler gauge is designed to measure the clearance on electronic ignition systems where a non-magnetic gauge is required.1/2" x 3-5/16".X2223 .................................................. 3.99 ea

Vintage Style Finned Coil CoverVintage style fi nned coil cover for your classic. Mounts with 1/4"-20 drive studs. Cast in aircraft grade A356 aluminum and polished to a high sheen.A5700219 ........................................... 74.99 set

Chrome Coil CoverDress your engine up with this all chrome coil cover. Fits most early model coils. Includes cover and attaching bracket. For small block engines. 66120 small block ............................... 6.99 ea

En

gin

es &

Co

mp

on

en

ts

512

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Starters and Accessories

1967-92 Remanufactured StarterReplace your worn out starter with these quality remanufactured starters. They are remanufactured to original specifi cations and will install and function as original.6 Cylinder3664S 1970-74 ................................. 64.99 ea 3664S 1975-76 with MT ................... 64.99 ea 3508S 1975-76 with AT .................... 64.99 ea 3664S 1977-81 ................................. 64.99 ea 3664S 1982-86 151 ........................... 64.99 ea 3510MS 1982 173 VIN 1 ................ 69.99 ea 3664S 1983 151 to mid 1983 ....... 64.99 ea 3664S 1983 151 mid 1983-on ..... 64.99 ea 3510MS 1983 173 ........................... 69.99 ea 3664S 1984-86 151 ........................... 64.99 ea 6313MS 1984-89 173 ........................... 69.99 ea 3664S 1989 231 ........................... 64.99 ea 6313MS 1990 ................................. 69.99 ea 8 Cylinder3696S 1967 326 ........................... 74.99 ea 3505S 1968-76 350 with standard .... 69.99 ea 3696S 1968-76 350 with opt. HD ..... 74.99 ea 3696S 1967-79 400 ........................... 74.99 ea 3696S 1971-76 455 ........................... 74.99 ea 3505S 1977 301 ........................... 69.99 ea 3696S 1977 350 VIN P ................ 74.99 ea 3505S 1977 350 VIN R ............... 69.99 ea 3689S 1977-78 305 with MT ............ 71.99 ea 3508S 1977-78 305 with AT ............. 64.99 ea 3696S 1977-79 403 ........................... 74.99 ea 3689S 1978-79 350 Chev. engine w/MT 71.99 ea 3510S 1978-80 350 Chev. engine w/AT 66.99 ea 3504S 1979-81 265, 301 ................... 49.99 ea3689S 1979 305 with MT ............ 71.99 ea 3508S 1979 305 with AT ............. 64.99 ea 3664S 1980 305 ........................... 64.99 ea 3689S 1981 305 with MT ............ 71.99 ea 3508S 1981 305 with AT ............. 64.99 ea 3689S 1982 305 VIN H with MT 71.99 ea 3664S 1982 305 VIN H with AT 64.99 ea 3664S 1982 305 VIN 7 ................ 64.99 ea 3664S 1983 305 VIN H, S ........... 64.99 ea 3664S 1984 305 VIN H ............... 64.99 ea 3664S 1984-85 305 VIN H with MT 64.99 ea 3664S 1984-86 305 VIN H with AT 64.99 ea 3664S 1984-86 305 VIN G ............... 64.99 ea 3664S 1985-90 305 VIN F with MT 64.99 ea 3664S 1985-90 305 VIN F with AT .. 64.99 ea 3664S 1987 305 VIN H with MT 64.99 ea 3664S 1987 305 VIN H with AT 64.99 ea 3664S 1988-90 305 VIN E with MT 64.99 ea 3664S 1988-90 305 VIN E with AT .. 64.99 ea 3664S 1987-92 350 ........................... 64.99 ea 6482 1998-02 350 ........................... 184.99 ea

1993-01 Replacement StarterClassic Industries® offers direct replacement brand new starters for your Firebird. Designed to replace your worn out or non-working starter these will install and function just like original. 6 Cylinder – 231N6431 1995-97 ................................... 134.99 ea N6484 1998-01 ................................... 121.99 ea V8 – 350N6442 1993-94 w/Delco PG 250 Starter 145.99 ea N6470 1995-97 w/Delco PG 260 Starter 154.99 ea N6482 1998-01 ................................... 139.99 ea

3510S

1967-81 Genuine GM Remanufactured StarterGenuine AC Delco remanufactured starter motor. Replace your original worn out starter with a AC Delco starter. We offer these original style rebuilt starters for 1st or 2nd generation models. Maintain originality along with the reliability of a factory replacement. Aftermarket starters are good but they don’t offer a cosmetically correct appearance. Each starter is completely remanufactured and tested before leaving the factory.Note: *Pontiac V8 except 326-350.No exchange requiredG9130* 1967-69 Pontiac V8 ................. 89.99 ea G9131 1967-68 Pontiac 326-350 ........ 109.99 ea G9130 1970-71 Pontiac 350 ................ 89.99 ea G9130 1970-75 Pontiac 400, 455 ........ 89.99 ea G9131 1972-75 Pontiac 350 ................ 109.99 ea G7244 1975-76 Chevrolet 250 w/AT .. 113.99 ea G9130 1976 Pontiac V8 ................. 89.99 ea G7244 1977 350-L w/AT ............... 113.99 ea G9131 1977 301............................. 109.99 ea G9130 1977 350-P, 350-R, 400, 403 89.99 ea G7244 1978-79 305-U, 305-G w/AT .. 113.99 ea G7244 1980 305-H ........................ 113.99 ea G7244 1981 267 Export, Canada ... 113.99 ea

Starters

1998-02 Firebird LS1, LS2 and LS6 StarterBench tested to meet or exceed stated specifi cations, these high torque starters for use with LS1, LS2 and LS6 engines feature a 1.9 HP motor to easily crank high compression engines. Available in your choice of chrome or gold zinc fi nish, these starters offer easy bolt-in installation. Made in the USA with 100% new components.FC2014 1998-02 chrome ............... 177.99 ea FC2015 1998-02 gold zinc ............ 140.99 ea

FC2014

DynaForce StarterThese MSD DynaForce starters are designed for severe duty, high compression applications. The 3.4 HP motors use a 4.4:1 gear reduction to easily start even an 18:1 engine with a lower current draw than traditional starters. Features a red powder coated fi nish and nickel-plated solenoid with a three position adjustable mounting block so they can be clocked for easier installation. Small block Chevy models have a straight mount bolt pattern and work with 153 and 168 tooth fl ywheels. Made in USA. Note: LS1/LS7 starter not compatible with GTO LS engines. 5095 small block Chevy starter ....... 312.99 ea 5096 LS1/LS7 starter ...................... 329.99 ea 5097 326, 455ci Pontiac starter ....... 432.99 ea

5095

5097

1967-92 High Torque Performance StarterHigh torque, lightweight performance starters. Performance starters feature up to 200 ft lbs of torque, 4.4:1 gear reduction, billet aluminum adapter blocks, and only weigh 8 lbs! Made in USA.Pontiac/OldsmobileS9510 166 tooth/200 ft lbs ............... 209.99 ea S9610 166 tooth/180 ft lbs ............... 199.99 ea Pontiac/ChevyS9502 153 tooth/200 ft lbs ............... 209.99 ea

1967-92 OEM High Torque StarterClassic offers high torque starters that will replace your original with upgraded performance and OEM appearance. Mounting method described below. Made in USA.S3655 1967-79 1 long bolt ............ 149.99 ea S3631 1970-81 1 long/1 short bolt 144.99 ea S3510A 1977-78 staggered pad ....... 139.99 ea S3631 1984-92 1 long/1 short bolt 144.99 ea

S3631

S3510A

S9510S9502

Starter Heat Shield SetIn today’s high heat environment, starters take in a lot of damaging heat that destroys the windings of the starter and solenoid. To combat this problem, we offer a nonconductive strap-on heat shield with a highly refl ective mylar surface. The Starter Heat Shield will refl ect over 90% of radiant heat, adding life to the starter and assuring reliable starts. The Starter Heat Shield is a universal set that fi ts all starters. TT1002 set with straps ....................... 24.99 set

KK

En

gin

es &

Co

mp

on

en

ts

513WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Starters and Accessories

1977-81 Starter Motor BraceOver a period of years, the starter motor braces are usually lost or discarded when the starter is replaced. Without this brace, undue strain will occur to the starter motor body causing wear or damage. When this happens you will need to replace the starter.G5111 1977-81 Chevy small block ..... 6.99 ea

Starter Parts

19674-77 Starter Solenoid Heat ShieldReproduction starter solenoid heat shield for various 1967-77 Pontiac models with 326-455ci engines. The two piece riveted steel waffl e design provides superior thermal protection for starter solenoids on models without Ram Air exhaust manifolds. Designed for starters that mount on the driver side. A8700128 1967-77 ............................. 30.99 ea

1967-97 Starter Motor Attachment BoltReplacement bolts used on Firebird models with Pontiac and Chevrolet engines.3/8"-16 x 1-21/32" – Outer BoltG0104 1982-92 V8 – GM ................. 8.99 ea G0104 1995-97 V8 – GM ................. 8.99 ea 3/8"-16 x 1-27/32" – Outer BoltG0102 1967-81 6 cylinder – GM ...... 4.99 ea G0102 1983-94 V8 – GM ................. 4.99 ea 3/8"-16 x 4-21/32" – Inner BoltG0101 1967-81 all – GM .................. 7.99 ea G0101 1982-94 V8 – GM ................. 7.99 ea TA4020 1967-81 all – repro ................ 11.99 pr TA4020 1982-94 V8 – repro ............... 11.99 pr 3/8"-16 x 3-5/8"3733289 1978 4-speed Muncie MT 4.99 ea 3733289 1981 4-speed B/W MT ..... 4.99 ea 3/8"-16 x 4-5/16" – Inner BoltG0103 1982-92 V8 – GM ................. 1.99 ea G0103 1995-97 V8 – GM ................. 8.99 ea

TA4020

Starter Motor Solenoid Heat ShieldThis heat shield is used for all standard (non-metric) solenoids on V8 model cars and trucks. Features easy mounting and is produced in stainless steel.DK1107 V8 non-metric ................ 17.99 ea

Starter Motor Replacement Brushes When rebuilding your original starter motor, it is usually necessary to replace the brushes. The brushes are the most commonly worn out part of the starter which can cause failure. These brushes have a 13/64" diameter hole. 4 required per starter motor. Each set includes 4 brushes. RX6004 1967-81 ................................. 3.99 set

1967-74 Pontiac Starter BraceReproduction starter brace for 1967-74 Firebird/Trans Am models with Pontiac V8 engines. Make sure that you have the correct Pontiac starter brace that helps relieve the pressure that is put on the starter when being engaged or while driving.F12393 1967-74 326-455 ............. 21.99 ea

1967-79 Starter Shims 5 piece starter shim set for various Pontiac models. Set includes: one 1/16" shim, two 1/32" shims, and two 1/64" shims. Used to shim the starter to the engine block.TA4021 1967-79 5 piece set .............. 8.99 set

1970-77 Pontiac Starter Brace Reproduction starter brace for 1970-77 models. This bolts to the end of the motor mount and the back of the starter for additional support. Identical to factory original.1253520 1970-77 ................................ 16.99 ea

1970-77 Starter Wire ClampReproduction of Pontiac coated starter wire clamp bolts to the end of the motor mount to keep the starter wires away from the manifold on all Ram Air vehicles.1253521 1970-77 ................................ 14.99 ea

1967-97 Starter Solenoid The starter motor solenoid commonly needs replacing due to heavy use and heat which is generated from the engine and exhaust manifolds. SS304 1967-81 repro ................. 24.99 ea SS327 1982-90 .......................... 19.99 ea SS327 1991-92 5.7..................... 19.99 ea SS906 1995-97 3.8, 5.7.............. 49.99 ea

1967-92 Gold Series Starter SolenoidThe gold series solenoids are made of high temperature insulated wire for better heat resistance, nickel-plated mounting bracket for better ground and increased contact area on studs for higher electrical current capacity and longer life.SS304G 1967-81 ........................... 43.99 ea SS327G 1982-90 ........................... 33.99 ea SS327G 1991-92 5.7 ...................... 33.99 ea

SS327G

SS304

Hot Shot Starter SolutionThe solution for vehicles with starters that are hard to start when hot, or vehicles with old or worn out electrical systems. The “Hot Shot” Plus model includes an engine bump switch which allows you to turn over the engine while working in the engine compartment.30201 with engine bump switch ....... 44.99 ea 30202 without bump switch .............. 28.99 ea

Remote Starter SolenoidAllows you to position the starter solenoid any place you need to in order to make maintenance easier. Includes extra wire and connectors to do the job right.30203 ................................................. 59.99 ea

En

gin

es &

Co

mp

on

en

ts

514

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

1967-89 Quality Remanufactured AlternatorWe offer a huge selection of remanufactured alternators, but sometimes it is more cost effective on late model vehicles to replace with a brand new unit. For this reason, we have chosen not to list remanufactured units on these late model vehicles. If your late model is not listed here, check our listings for brand new alternators. Remanufactured and tested to OE specifi cations! No core charge!Note: For proper identifi cation, you may need to check your VIN code on listings with suffi xes after the engine size.

AlternatorsInternal and External Regulator Alternator Indentifi cation Guide

The Delco SI series alternator are manufactured so that the rear half of the alternator case can be assembled to the front half of the case in any one of four positions. These positions are referred to as the “clock” positions. Clock positions are determined by viewing the alternator from the rear with the threaded mounting hole (adjusting ear) straight up. With this view, the terminal socket for the two wire plug-in connector will point to any one of the four available “clock” positions. Straight up is 12 o’clock, to the right is 3 o’clock, straight down is 6 o’clock and to the left is 9 o’clock. Having the different clock positions allows for the alternator to be mounted on the left side or right side of the engine. It can also be mounted right side up or upside down depending on the clock position. This allowed for the SI series alternator to be used on many different applications.

Alternator Conversion AdapterEasy to use conversion plugs are designed to adapt your wire harness to upgrade your charging system with a later model, internally regulated alternator.CA27555 external regulator to 1985 and earlier “SI” type alternator ...... 18.99 ea CA37787 external reg. harness to 1986 and later “CS130” type alternator ... 26.99 ea CA37796 1985 and earlier “SI” harness to “CS130” type alternator ....... 22.99 ea

Connector Socket

Battery Terminal Battery Terminal

1969-85 1986-Present

Battery Terminal

Connector Socket

Connector Socket

External RegulatorExternal Regulator Internal Regulator “SI” Type

Internal Regulator “SI” Type

Internal Regulator “CS” Type

Internal Regulator “CS” Type

1963-74

adjusting ear

pivot ear

3 o’clock

6 o’clock

9 o’clock

12 o’clock terminal socket

Clocking Position Indentifi cation Guide

Alternators

6 CylinderExternal Regulator7122 1967 55A 230 all ....................................... 54.99 ea 7122 1968-69 55A 250 all ....................................... 54.99 ea Internal Regulator7127U6 1982 63A 2.8/173 without AC ........................ 74.99 ea 7137U6 1982 70A 2.8/173 with AC .............................. 74.99 ea 7127U6 1983-84 63A 2.8/173 without AC ........................ 74.99 ea 7273U6 1983-84 78A 2.8/173 with AC or rear defrost ...... 91.99 ea 7273U6 1985 78A 2.8/173 without AC, 1st design ...... 91.99 ea 7273U9 1985 78A 2.8/173 without AC, 2nd design ..... 91.99 ea 7273U6 1985 78A 2.8/173 with rear defrost, 1st dsgn 91.99 ea 7273U9 1985 78A 2.8/173 with rear defrost, 2nd dsgn 91.99 ea 7290U6 1985 108A 2.8/173 with AC .............................. 124.99 ea 7273U9 1986 78A 2.8/173 without AC or rear defrost 91.99 ea 7290U6 1986 108A 2.8/173 with AC or rear defrost ...... 124.99 ea 7860U11 1987-89 100A 2.8/173 all ....................................... 109.99 ea 7860U11 1990-92 100A 3.1/189-T all ....................................... 109.99 ea 7127U3 1977 63A 3.8/231 without AC ........................ 69.99 ea 7127U3 1978-81 63A 3.8/231 without AC ........................ 69.99 ea 7127U3 1977-80 63A 3.8/231 with AC .............................. 69.99 ea 7127U12 1980 63A 3.8/231 with AC and rear defrost.... 69.99 ea 7137U12 1981 70A 3.8/231 with AC or rear defrost ...... 74.99 ea 7805U5 1989 120A 3.8/231-7 turbo ................................... 139.99 ea 7127U9 1970-74 63A 250 all ....................................... 56.99 ea 7135M 1971-74 80A 250 HD option .......................... 99.99 ea 7127U9 1975-76 63A 250 all ....................................... 56.99 ea

8 CylinderExternal Regulator7122 1967 55A 326 all ....................................... 54.99 ea 712 1968 55A 350 all ....................................... 54.99 ea 7122 1969 55A 350 all ....................................... 54.99 ea 7122 1967-68 55A 400 all ....................................... 54.99 ea Internal Regulator7145U6 1980 63A 4.3/265 with AC, optional 1st dsgn 54.99 ea 7127U12 1980-81 63A 4.3/265 all ....................................... 69.99 ea 7137U12 1980-81 70A 4.3/265 with AC, optional 2nd dsgn 74.99 ea 7127U9 1977-79 63A 4.9/301 all ....................................... 56.99 ea 7127U12 1980-81 63A 4.9/301 all ....................................... 69.99 ea 7137U12 1980-81 70A 4.9/301 with HD option .................. 74.99 ea 7127U9 1977 63A 5.0/305-U all ....................................... 56.99 ea 7127U3 1978-79 63A 5.0-U,G all ...................................... 69.99 ea 7127U3 1980 63A 5.0/305-H all w/o elec trunk release ... 69.99 ea 7127U12 1980 63A 5.0/305-H with electric trunk release .. 69.99 ea 7137U3 1981-82 70A 5.0/305-H 4 bbl, w/AC or rear defrost 74.99 ea 7127U3 1981-84 63A 5.0/305-H 4 barrel, without AC .......... 69.99 ea 7134U3 1982 85A 5.0/305-H 4 barrel, with HD option .... 74.99 ea 7137U3 1982 70A 5.0/305-7 4 barrel, all ......................... 74.99 ea 7134U3 1982 85A 5.0/305-7 4 barrel, with HD option .... 74.99 ea 7137U3 1983 70A 5.0/305-S FI, all ................................. 74.99 ea 7134U3 1983 85A 5.0/305-S FI, with HD option ............ 74.99 ea 7273U3 1983-84 78A 5.0/305-H 4 barrel, with AC ............... 89.99 ea 7273U6 1985 78A 5.0/305-G HO, w/o AC 1st design ...... 91.99 ea 7127U3 1985 63A 5.0/305-G HO, w/o AC 2nd design .... 69.99 ea 7273U9 1985 78A 5.0/305-G HO, with rear defroster ...... 91.99 ea 7127U3 1985 63A 5.0/305-H 4 bbl, w/o AC, 1st design .. 69.99 ea 7273U9 1985 78A 5.0/305-H 4 barrel, w/AC, 1st design 91.99 ea 7287U9 1985 120A 5.0/305-H 4 barrel, with HD option .... 109.99 ea 7273U9 1985-86 78A 5.0/305-H 4 bbl, w/o AC, 2nd design 91.99 ea 7273U9 1985-86 78A 5.0/305-H 4 bbl, with rear defrost....... 91.99 ea 7273U9 1986 78A 5.0/305-G HO, without AC ................. 91.99 ea 7127U9 1969 63A 5.7/350 all ....................................... 56.99 ea 7127U9 1970-76 63A 5.7/350 all ....................................... 56.99 ea 7135M 1970-76 80A 5.7/350 with HD option .................. 99.99 ea 7127U9 1977 63A 5.7-P,R all ....................................... 56.99 ea 7127U3 1978-79 63A 5.7/350-L all ...................................... 69.99 ea 7127U9 1969-76 63A 6.6/400 all ....................................... 56.99 ea 7135M 1969-76 80A 6.6/400 with HD option .................. 99.99 ea 7127U9 1977-79 63A 6.6/400 all ....................................... 56.99 ea 7127U9 1977-79 63A 6.6/403 all ....................................... 56.99 ea 7127U9 1971-76 63A 7.5/455 all ....................................... 56.99 ea 7135M 1971-76 80A 7.5/455 with HD option .................. 99.99 ea

7127U3

KK

En

gin

es &

Co

mp

on

en

ts

515WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

DynaForce AlternatorDynaForce blue printed alternators cover your electrical needs whether it’s a high output Street Series unit for a high feature street rod, or a low output, low drag Track/Racing unit for a purpose built race car. Street Series alternators are offered with chrome, black, and natural fi nishes and are designed to fi t most GM bracket systems from the 1960’s to the 80’s with a simple one wire hook up. Racing alternators are available in a 50 amp Denso style or 100 amp GM style and are compatible with 12 and 16 Volt electrical systems thanks to an adjustable voltage regulator. They feature the same one wire hook up and a red wrinkle fi nish. Every alternator assembly is tested and is delivered with proof of performance. Made in USA.Street Alternators 5321 120 amp black fi nish ......... 306.99 ea 5361 160 amp black fi nish ......... 355.99 ea 5322 120 amp chrome fi nish ...... 328.99 ea 5362 160 amp chrome fi nish ...... 382.99 ea

Alternators

1967-02 Performance AlternatorClassic offers quality replacement alternators for 1967-02 Firebird models. We also offer performance alternators that offer higher amp output than stock replacements. Made in USA.External RegulatorS7102 1967-69 60 amp ................ 124.99 ea Internal RegulatorS7127 1970-82 60 amp all ............ 121.99 ea S8002 1983-85 100 amp all ............ 129.99 ea S8002 1986 100 amp 5.0L ......... 129.99 ea S7802 1987 105 amp 5.0L, 5.7L 149.99 ea S7860 1987-92 105 amp 2.8L, 3.1L 154.99 ea S7861 1988-92 105 amp 3.1, 5.7L .. 149.99 ea S7864 1993-94 105 amp 5.7L ......... 259.99 ea S8114 1993-97 105 amp 3.4L ......... 149.99 ea S7805 1995-97 140 amp 5.7L LT-1 259.99 ea S48242 1998-02 150 amp 5.7L LS-1 239.99 ea Hi Amperage with Internal RegulatorS8002 1967-82 100 amp all ............ 129.99 ea S47294 1983-85 140 amp all ............ 159.99 ea S47294 1986 140 amp 5.0L ......... 159.99 ea S47802 1987 140 amp 3.1, 5.7L .. 169.99 ea S47860 1987-92 140 amp 3.1, 3.1L .. 164.99 ea S47861 1988-92 140 amp 3.1, 5.7L .. 169.99 ea S47864 1993-94 200 amp 5.7L ......... 329.99 ea S48114 1993-97 140 amp 3.4L ......... 169.99 ea S47805 1995-97 200 amp 5.7L LT-1 329.99 ea

Alternators

53625321

N8114U3 N7294U3 S8002

S48242

S7127

S7864

1970-86 One Wire GM AlternatorStandard or chrome fi nish 1 wire alternators are now available in 70, 100, and 140 amp versions. Improve the overall appearance of your engine compartment with a chrome alternator. These alternators are a 1 wire design, with an internal regulator but can be used for 1 wire or 3 wire operation.Internal Regulator S7127 1970-86 standard 70 amp .. 121.99 ea S17127 1970-86 chrome 70 amp .. 141.99 ea S17294 1970-86 chrome 100 amp 141.99 ea S37293 1970-86 chrome 140 amp 181.99 ea

S17294

S17102 S17127

115 Amp Mini AlternatorThis all new 115 amp mini alternator is a great addition to any modifi ed or high-performance engine. Available in standard or chrome style. Includes internal regulator. S82071 standard ............................. 169.99 ea S182071 chrome ............................... 219.99 ea

S82071 S182071

1983-02 Brand New AlternatorThese brand new alternators will install and function as original. Appearance may differ slightly from original. If your earlier model Firebird is not listed here, check our listings for remanufactured units.Note: Part numbers with a “U” suffi x followed by a number refers to a clock position of the plug-in terminal on the alternator case. Looking at the back of the alternator with the pivot ear at the bottom, or 6 o’clock position, note the clock position of the plug-in terminal on your original alternator, and match it to the replacement listings. Be sure to check the 8th digit of the VIN code on 5.0L/305 engines.

6 CylinderInternal RegulatorN7294U9 1985-86 94A 2.8/173 w/oAC, 2nd dsgn 79.99 ea N7860U11 1987-89 105A 2.8/173 all 89.99 ea N7860U11 1990-92 105A 3.1/189-T all 89.99 ea N8114U3 1993-95 105A 3.4/207 all 89.99 ea 7911U4 1989 120A 3.8/231-7 turbo ........ 141.99 ea N8200U11 1995-99 105A 3.8/231 all 99.99 ea N8272U11 2000-02 105A 3.8/231 all 129.99 ea

8 CylinderInternal Regulator – 5.0/305-HN7294U3 1983-84 94A 4 bar, w/AC 94.99 ea N7294U9 1985-86 94A 4 bar, all .. 79.99 ea N7858U11 1987 105A 4 bar, all .. 91.99 ea Internal Regulator – 5.0/305-GN7294U3 1984 94A HO, all .... 94.99 ea N7294U9 1985-86 94A HO, w/AC 79.99 ea N7294U9 1986 94A HO, w/o AC 79.99 ea Internal Regulator – 5.0/305-FN7858U11 1987 105A 4 bar, all .. 91.99 ea Internal Regulator – 5.0-E,FN7917U11 1988-89 105A EFI/MFI, all 89.99 ea N7861U11 1990-92 105A EFI/MFI, all 89.99 ea Internal Regulator – 5.7/350-8N7858U11 1987 105A all ............ 91.99 ea N7917U11 1988-89 105A all ............ 89.99 ea N7861U11 1990-92 105A all ............ 89.99 ea Internal Regulator – 5.7/350-PN8119 1993-94 124A all, 1st dsgn 119.99 ea N8172U7 1994-97 140A all, 2nd dsgn 129.99 ea Internal Regulator – 5.7/350-GN8242U5 1998-02 102A all ............ 104.99 ea

S7127

1998-02 Firebird LS1 AlternatorThese 1998-02 LS1 alternators are available in stock 105 amp rating or high output 140 amp rating. Available in chrome, cast, polished aluminum or black fi nishes. Made in the USA with 100% new components.FC2001 1998-02 105 amp, chrome .. 195.99 ea FC2002 1998-02 105 amp, polished 185.99 ea FC2003 1998-02 105 amp, cast ....... 182.99 ea FC2004 1998-02 140 amp, chrome .. 216.99 ea FC2005 1998-02 140 amp, polished 216.99 ea FC2006 1998-02 140 amp, black ..... 191.99 ea

FC2001

1967-94 Chrome AlternatorHigh-quality, triple chrome-plated alternators will enhance the look of your engine compartment and versions of the originals. Available to fi t most Firebirds from 1967-94. Available for models with or without air conditioning.External RegulatorS17102 1967-69 70 amp 6 cyl & V8 149.99 ea Internal RegulatorS17127 1970-82 70 amp all ............... 141.99 ea S17294 1983-86 100 amp 2.8L w/o AC 141.99 ea S17294 1983-86 100 amp 305, TPI ..... 141.99 ea S17290 1983-86 140 amp 2.8L w/AC 199.99 ea S17802 1987 105 amp 3.1, 5.7L ..... 189.99 ea S17860 1987-92 105 amp 3.1, 3.1L ..... 189.99 ea S17861 1988-92 105 amp 3.1, 5.7L ..... 189.99 ea S17864 1989 140 amp 3.8L Turbo 329.99 ea S17864 1993-94 140 amp 5.7L ............ 329.99 ea

En

gin

es &

Co

mp

on

en

ts

516

KK

Toll Free 800.854.1280WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

1967-02 Alternator PigtailUsually burnt or corroded the alternator pigtail is a very important item in keeping your vehicles charging system operating correctly. Replace the alternator pigtail in your 1967-02 Firebird model if it is burnt or corroded with this fi ne reproduction.WE209 1967-74 .................................. 2.99 ea WE205 1970-88 .................................. 3.99 ea 494 1995-02 .................................. 27.99 ea

WE205

WE209

1967-72 Voltage RegulatorReplacement external voltage regulators for 1967-72 models. Manufactured using modern solid state electronics. For use with external regulator models. This regulator is an aftermarket replacement and does not feature any original markings on outer case.VR635C 1967-72 chrome ................ 49.99 ea

1969-97 Voltage RegulatorA voltage regulator is an electrical device used to control the output of a generator or alternator. External regulators are normally located on the fender wall in the engine compartment. Internal regulators are mounted in the alternator housing. Fits 1969-97 Firebird models.G7236 1969-88 62 amp GM ............... 19.99 ea VR780 1986 2.5L-2, w/85 amp alt 45.99 ea VR781 1987 85,100,105,108 alt ..... 42.99 ea VR781 1987-97 all ............................... 42.99 ea

VR781

G7236

Alternator Components

14716

14717

1967-86 Chrome Alternator Case SetReplace the alternator case with this alternator case set. For use with external or internal regulators. 66441 1973-86 internal ................. 59.99 set

Alternator StudARP’s “bulletproof” alternator studs are made from a premium grade 8740 chromoly steel alloy and heat treated to a nominal 200,000 psi tensile strength. They are very rigid and won’t bend under the stress, eliminating problems with alternator pulley alignment. Available in 5" and 5-1/4" lengths. Includes: a 12 point nut and fl at washer, 1" coarse thread on one side and 1" fi ne thread on the other side.AR351 7/16" 5" long ........................... 11.99 set AR352 7/16" 5-1/4" long ..................... 9.99 set

Terminal Cap and RetainerAlternator wire terminal cap and retainer used on most all vehicles equipped with a GM threaded post type alternator. The retainer attaches behind the alternator post lead and has the clip edge to accept the cap. These protective pieces are made of injected molded plastic and each retainer is color coded to match the cap.14716 black cap and retainer .............. 14.99 set 14717 red cap and retainer .................. 14.99 set

1967-72 Alternator Housing BoltsReproduction alternator assembly bolts. These bolts hold the two halves of the alternator housing/case together. Available in 4 piece sets with phosphate- or silver zinc-plating.1253554 1967-72 phosphate-plating 7.99 set 1253555 1967-72 silver zinc-plating 9.99 set

AR351

1967-72 Rear Alternator Rubber BootReproduction of the rubber boot which is located on the wiring loom where it plugs into the rear of the alternator. This is an excellent reproduction of the original rubber boot. K0105 1967-72 ...................................... 2.99 ea

1967-80 Alternator Bracket SpacerReplacement GM alternator bracket spacer which was used on all 1967-80 V8 Firebirds with 42, 55 and 61 amp alternators, and 1970-75 six cylinder Firebirds. Cut to length as required.3825451 1967-80 ................................. 3.99 ea

1966-74 Alternator Code StampTo guarantee that vehicles were correctly assembled, parts were marked with specifi c codes to make them easy to identify. Alternators were commonly stamped with black or dark purple paints and inks. These reproductions duplicate the alternator code stamps used on 1966-74 Pontiac models. A8700185 1966-70 XC 37 amp w/o AC 13.99 ea A8700186 1966-70 XB 55 amp w/AC ... 13.99 ea A8700187 1971-74 SN 37 amp w/o AC 13.99 ea

A8700186A8700185

Alternator Parts

“Delco Remy” markings

1967-72 Reproduction Voltage RegulatorOER® reproduction OE style voltage regulator which replaces the original units on 1967-72 models. This regulator features the “Delco Remy” markings. For use with external regulator models.1119519 1967-72 ................................. 49.99 ea

l R ”

1253554

1967-70 Alternator FanCorrect replacement 11 blade alternator fan found on all 1967-70 Firebird models. May be used as a service replacement on all models from 1967-86.1969488 1967-69 with hook blade .. 36.99 ea 1966990 1969-70 ............................ 36.99 ea

19699901969488

1967-86 Alternator Pulley NutReproduction alternator pulley nut. Zinc-plated for rust prevention. Correct 11/16"-20 thread with 15/16" Hex size.153582 1967-86 ..................................... 3.99 ea

KK

En

gin

es &

Co

mp

on

en

ts

517WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alternator Components

1967-69 Rear Alternator Mounting BracketReproduction of the rear alternator mounting bracket used on 1967-69 Firebirds with V8 engines and power steering.C869131 1967-69 ................................ 26.99 ea

1967-69 Front Alternator Mounting BracketReproduction of the front alternator mounting brackets used on 1967-69 Firebirds with V8 engines and power steering.C869121 1967-68 ................................. 24.99 ea C963131 1969 ...................................... 24.99 ea

1967-70 Alternator Pivot BracketReproduction of the alternator pivot mounting bracket used on 1967-70 Firebirds with V8 engines and power steering.C869111 1967-70 ................................ 14.99 ea

1969-70 Alternator Mounting SetComplete mounting set includes mounting bracket, bolt and spacer. Can be used with all Pontiac V8s with 1969 and up style timing covers. Popular with Ram Air and race cars. For use on Pontiacs without power steering. PY11 1969-70 .................................... 44.99 set

1977-86 Upper BracketOriginal style alternator brackets for your classic. For use on vehicles with small block engine.Note: For use on models with factory manifolds.14081227 1977-86 ................................ 24.99 ea

1988-92 Alternator BracketReplace your missing or broken alternator bracket with this Genuine GM unit. This is the correct alternator and power steering pump bracket found on all 1988-92 Firebird models. G5755 1988-92 V8 .......................... 77.99 ea

1989-92 Alternator BracketCorrect replacement alternator bracket found on all 1989-92 Firebird models with the 5.0E, 5.0F, and 5.7-8 engines. G7265 1989-92 ...................................... 4.99 ea

1998-02 Rear Alternator BraceGenuine GM rear alternator brace is mounted on the rear of the alternator for support.G4283 1998 6 cylinder ............. 9.99 ea G4286 1998-02 8 cylinder ............. 22.99 ea G4284 1999-02 6 cylinder ............. 9.99 ea

G4283

G4286

G4284

1970 Alternator Bracket SetHigh-quality reproduction alternator mounting bracket set for 1970 Firebird/Trans Am. These brackets were used on 350, 400 and 455ci RA III and RA IV and HO models with power steering. Designed to replace GM part #480515 and #480517. A8700123 1970 brackets .............. 105.99 set

Alternator Parts

C869121

1977-86 Chrome Upper Alternator BracketChrome upper alternator bracket for 1977-86 Firebird models with small block engine. Top bracket bolts to the intake manifold.Note: For use on models with factory manifolds.T9312 1977-86 small block .......... 14.99 ea

1969-76 Small Block Alternator BracketsAluminum alternator bracket set is designed for small block Chevy engines with a long water pump. Mounts the alternator on the RH (passenger side) of the vehicle using original holes in the water pump. Will work on engines that have the power steering pump on the LH (driver side) of the vehicle. Hardware is included.Note: Use with a long water pump.153663 1969-76 Chevy sb ............ 59.99 set

1969-76 SB Upper Alternator BracketThis 2 piece alternator bracket set is a chrome-plated reproduction of the original brackets. These brackets are designed for use with original style intake and long water pump. This set includes the upper bracket and the lower (L-shaped) bracket. Hardware not included.Note: Use with a long water pump. T9316 1969-76 Chevy sb ............. 14.99 set

1967-68 SB Upper Alternator BracketChrome upper alternator bracket for 1967-68 small block engines equipped with a short water pump.Note: Use with a short water pump.T9319 1967-68 Chevy sb ................ 14.99 ea