chesterton product data sheet,chestertondocs.chesterton.com/lubricants/tdcl294_en.pdf · soils...

294 CSD PRODUCT DATA SHEET APPLICATION AREAS • Bearings • Chains & Cables • Air, Pneumatic Tools • Molds & Dies • Fork Lifts • Brakes & Clutches KEY FEATURES AND BENEFITS • Low aromatic content • Fast evaporation rate • No residue • Dissolves resins, polymers, adhesives and petroleum residues • Contains no ozone depleting materials • Safe for all metals, most plastics, rubber and coatings • NSF C1, K1, K3 Registered 143867 PACKAGING Aerosol DIRECTIONS Before using Chesterton 294 on painted surfaces, plastic or rubber, a small amount of 294 should be placed on the surface in a non-critical area. Wait about 15 minutes and check surface for attack or softening. If damage has occured, do not use product. Apply the product directly to the surface to be cleaned. Allow a short time for 294 to attack the soil. In some cases, with stubborn deposits, mechanical action should be used. Wipe the part/equipment with a absorbent wiper or allow the part/equipment to air dry. DESCRIPTION Chesterton’s 294 CSD is a fast acting, industrial degreaser for critical equipment. It contains no chlorinated, aromatic or solvents of questionable toxicity. Designed to quickly penetrate and cut through dirt, grime, oil, grease, asphalt, adhesives and other contaminants to minimize downtime and reduce the time of mechanical maintenance operations. 294 CSD is formulated to be fast evaporating and low in residue preventing costly downtime. It is compatible with most surfaces and will clean a broad range of soils found in industry. 294 CSD is commonly used as a general- purpose degreaser for maintenance; excellent in removing lubricant deposits prior to maintenance or re-lubrication. Cleans optical and electrical components, removes printing inks, resins and polymers. 294 CSD should not be used on energized electrical equipment or near ignition sources. Before using this product, please refer to Safety Data Sheet (SDS). Technical Data reﬂects results of laboratory tests and is intended to indicate general characteristics only. Since many actual application circumstances are beyond Chesterton's knowledge and/or control, the product user must determine the suitability of the products it intends to use for its particular purpose and assume all risks and liabilities in connection therewith. CHESTERTON DISCLAIMS ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Form No. 071505 1/18 860 Salem Street, Groveland, MA 01834 USA 978-469-6888 www.chesterton.com © 2018 A.W. Chesterton Company ® Registered trademark owned by A.W. Chesterton Company in USA and other countries, unless otherwise noted. TYPICAL PHYSICAL PROPERTIES Appearance Clear, White Liquid Flash Point (ASTM D 93, DIN 51 755) -18°C (-4°F) Specific Gravity 0.71 Solubility in Water None Aromatic Content, % < 0.2 Percent Volatile by Volume at 25°C (77°F) 100 Percent VOC, US EPA < 80 Color, Saybolt (ASTM D 156) > 30 Evaporation Rate at 25°C (77°F) n-Butyl Acetate=1 5

Upload: hacong

Post on 11-May-2018

218 views

Category:

Documents

1 download

Report

Download

Embed Size (px):

TRANSCRIPT

294CSD

PRODUCT DATA SHEET

APPLICATION AREAS

• Bearings

• Chains & Cables

• Air, Pneumatic Tools

• Molds & Dies

• Fork Lifts

• Brakes & Clutches

KEY FEATURES AND BENEFITS• Low aromatic content• Fast evaporation rate• No residue• Dissolves resins, polymers, adhesives and

petroleum residues• Contains no ozone depleting materials• Safe for all metals, most plastics, rubber

and coatings• NSF C1, K1, K3 Registered 143867

PACKAGINGAerosol

DIRECTIONSBefore using Chesterton 294 on painted surfaces, plastic or rubber, a small amount of 294 should be placed on the surface in a non-critical area. Wait about 15 minutes and check surface for attack or softening. If damage has occured, do not use product. Apply the product directly to the surface to be cleaned. Allow a short time for 294 to attack the soil. In some cases, with stubborn deposits, mechanical action should be used. Wipe the part/equipment with a absorbent wiper or allow the part/equipment to air dry.

DESCRIPTIONChesterton’s 294 CSD is a fast acting, industrial degreaser for critical equipment. It contains no chlorinated, aromatic or solvents of questionable toxicity. Designed to quickly penetrate and cut through dirt, grime, oil, grease, asphalt, adhesives and other contaminants to minimize downtime and reduce the time of mechanical maintenance operations. 294 CSD is formulated to be fast evaporating and low in residue preventing costly downtime. It is compatible with most surfaces and will clean a broad range of soils found in industry. 294 CSD is commonly used as a general- purpose degreaser for maintenance; excellent in removing lubricant deposits prior to maintenance or re-lubrication. Cleans optical and electrical components, removes printing inks, resins and polymers. 294 CSD should not be used on energized electrical equipment or near ignition sources.

Before using this product, please refer to Safety Data Sheet (SDS).

Technical Data reflects results of laboratory tests and is intended to indicate general characteristics only. Since many actual application circumstances are beyond Chesterton's knowledge and/or control, the product user must determine the suitability of the products it intends to use for its particular purpose and assume all risks and liabilities in connection therewith. CHESTERTON DISCLAIMS ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Form No. 071505 1/18

Company in USA and other countries, unless otherwise noted.

TYPICAL PHYSICAL PROPERTIES

Appearance Clear, White Liquid

Flash Point (ASTM D 93, DIN 51 755) -18°C (-4°F)

Specific Gravity 0.71

Solubility in Water None

Aromatic Content, % < 0.2

Percent Volatile by Volume at 25°C (77°F) 100

Percent VOC, US EPA < 80

Color, Saybolt (ASTM D 156) > 30

Evaporation Rate at 25°C (77°F) n-Butyl Acetate=1 5