chemical testing laboratories in uae
DESCRIPTION
chemical testing laboratories in uaeTRANSCRIPT
Chemical Testing laboratories in UAE
www.nationalab.com
The Materials Testing Lab provides testing services mainly for Soil Investigation (auger boring, standard penetration test and trial pits), Concrete Investigation (ultrasonic pulse velocity, Schmidt hammer, drilled core test, compressive strength including cube, block, interlock, and kerbstone), Soil Test (liquid and plastic limit, linear shrinkage, particle density, sieve analysis, in-situ density test, moisture dry density, Califomia Bearing Ratio, bearing capacity by plate load test, electrical resistivity, moisture content), Aggregate Test (Sieve analysis, clay lumps and friable, sand equivalent, bulk density, flakiness, elongation, particle density and water absorption, Specific gravity, crushing value, TFV, Los Angeles Abrasion Value, impact value, soundness, organic impurities), Steel Test (cross-sectional area, mass, tensile properties, bend and rebend, epoxy coating thickness), and Chemical Analysis for soil, aggregate, concrete and water (sulfate, chloride, pH, TDS).
About Us
www.nationalab.com
The various testing of aggregates performed by Chemical Analysis Laboratories includes the impact value which gives a relative measure of the resistance to sudden impact while the crushing value gives a relative measure of the resistance to crushing under the applied load. The specific gravity and water absorption are to determine the density of the essentially solid portion of the aggregate. The LOS Angeles machine is used for testing aggregates for resistance and degradation. The Flakiness index of an aggregate sample is found by separating the flaky particles. The Sieve Analysis performed by chemical testing laboratories in UAE helps in determining the size of granular material like aggregates and also all are required to meet a minimum strength valve, as defined by the 10% value test.
Chemical Testing Laboratory
www.nationalab.com
Contact [email protected]