chapter 15 referenced standards - … 15 referenced standards this chapter lists the standards that...

CHAPTER 15 REFERENCED STANDARDS

This chapter lists the standards that are referenced in various sections of this document. The standards are listed herein by the promulgating agency of the standard, the standard identification, the effective date and title, and the section or sections of this document that reference the standard.

ANSI American National Standards Institute 11 West 42nd Street New York, NY 10036

Standard reference number Title

Referenced in code

section number

Z10.1-98

Z10.3-98

Gas Water Heaters-Volume I-Storage, Water Heaters with Input Ratings of 75,000 Btu per Hour or Less

Gas Water Heaters—Volume III—Storage, Water Heaters 1002.1 1002.1

Z21.8-94 Installation of Domestic Gas Conversion Burners 919.1

Z21.13-91 Gas-Fired Low Pressure Steam and Hot Water Heating Boilers-with 1993 and 1994 Addenda 1004.1

API American Petroleum Institute 1220 L Street, NW Washington, DC 20005


Referenced in code

section number

12B—95 Specification for Bolted Tanks for Storage of Production Liquids Table 1302.3 12D—94 Specification for Field Welded Tanks for Storage of

Production Liquids Table 1302.3 12F—94 Specification for Shop Welded Tanks for Storage of

Production Liquids Table 1302.3 650—93 Welded Steel Tanks for Oil Storage with 1994 and 1995 Addenda Table 1302.3

ARI Air-Conditioning & Refrigeration Institute 4301 N. Fairfax Drive, Suite 425 Arlington, VA 22203


Referenced in code

section number

700—95 Specifications for Fluorocarbon and Other Refrigerants 1102.2.2.3

FLORIDA BUILDING CODE — MECHANICAL 15.1

REFERENCED STANDARDS

ASHRAE 1 American Society of Heating, Refrigerating and Air Conditioning Engineers 1791 Tullie Circle, NE Atlanta, GA 30329-2305

, Inc.


Referenced in code

section number

15—94 34—92

62-89

Safety Code for Mechanical Refrigeration Number Designation and Safety Classification of

Refrigerants—with Addenda through 1997 Ventilation for Acceptable Indoor Air Quality

1101.6, 1108.1

202, 1102.2.1,1103.1 403.5

ASME American Society of Mechanical Engineers 345 East 47th Street New York, NY 10017


Referenced in code

section number

Β 1.20.1—83 Β16 3—92

Pipe Threads, General Purpose (Inch) Malleable Iron Threaded Fittings

1203.3.5, 1303.3.3 Table 1202.5

Β16.5—88 Pipe Flanges and Flanged Fittings—with 1992 Addendum Table 1202.5 Β 16.9—93 Factory Made Wrought Steel Buttwelding Fittings Table 1202.5 B16.ll—91 Forged Steel Fittings, Socket-Welding and Threaded Table 1202.5 Β16.15—85 Cast Bronze Threaded Fittings, Classes 125 and 250 Table 1202.5 Β16.18—84 Cast Copper Alloy Solder Joint Pressure Fittings Table 1202.5 Β16 22—95 Wrought Copper and Copper Alloy Solder Joint Pressure Fittings Table 1202.5 Β 16.23—92 Cast Copper Alloy Solder Joint Drainage Fittings (DWV) Table 1202.5 Β 16.24—92 Cast Copper Alloy Pipe Flanges and Flanged Fittings:

Class 150, 300,400, 600, 900. 1500 and 2500, With 1991 Errata Table 1202.5 Β 16.26—88 Β 16.28—94 Β 16.29—94

ASME—95

Cast Copper Alloy Fittings for Flared Copper Tubes Wrought Steel Buttwelding Short Radius Elbows and Returns Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings-DWV Boiler & Pressure Vessel Code, Sections I, IV, VI & VIII . .

Table 1202.5 Table 1202.5

Table 1202.5 1002.1, 1003.1, 1004.1, 1011.1

CSD-1—95 Controls and Safety Devices for Automatically Fired Boilers 1004.1

ASTM American Society for Testing and Materials 1916 Race Street Philadelphia, PA 19103-1187


Referenced in code

section number

A 53—97 Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated Welded and Seamless . . .Table 1202.4, Table 1302.4

A 106—97 A 126—95

Specification for Seamless Carbon Steel Pipe for High-Temperature Service Specification for Gray Iron Castings for Valves, Flanges,

and Pipe Fittings

. . .Table 1202.4, Table 1302.4

Table 1202.5 A 254—97 Specification for Copper Brazed Steel Tubing . . .Table 1202.4, Table 1302.4

15.2 FLORIDA BUILDING CODE — MECHANICAL

http://B16.ll


ASTM (continued)

A 420/A420M—96a Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service . .Table 1202.5

A 539—96 Specification for Electric-Resistance-Welded Coiled Steel . .Table 1302.4 Β 32—96 Specification for Solder Metal 1203.3.3 Β 42—96 Specification for Seamless Copper Pipe, Standard Sizes 1107.4.2, Table 1202.4 Β 43—96 Specification for Seamless Red Brass Pipe, Standard Sizes 1107.4.2, Table 1202.4 Β 75—97 Specification for Seamless Copper Tube Table 1202.4, Table 1302.4 Β 88—96 Specification for Seamless Copper Water Tube 1107.4.3, Table 1202.4. Table 1302.4 Β 135—96 Specification for Seamless Brass Tube . .Table 1202.4 Β 251—97 Specification for General Requirements for Wrought Seamless Copper and Copper-alloy Tube . Table 1202.4 Β 280—97 Specification for Seamless Copper Tube for Air

Conditioning and Refrigeration Field Service 1107.4.3-' Β 302—97 Specification for Threadless Copper Pipe . .Table 1202.4 Β 813—93 Standard Specification for Liquid and Paste Fluxes

for Soldering Applications of Copper and Copper Alloy Tube . . . 1203.3.3 C315—96 Specification for Clay Flue Linings 801.16.1, Table 803.10.4 C 411—82 Test Method for Hot-Surface Performance of

High-Temperature Thermal Insulation 604.3 D56—97 Test Method for Flash Point by Tag Closed Tester 202 D93—96 Test Method for Flash Point of Pensky-Martens Closed Tester . . . . 202 D 1527—96a Specification for Acrylonitrile-Butadiene-Styrene (ABS)

Plastic Pipe, Schedules 40 and 80 . .Table 1202.4 D 1785—96b Specification for Poly (Vinyl Chloride)(PVC) Plastic Pipe,

Schedules 40, 80 and 120 . .Table 1202.4 D 2235—96a Specification for Solvent Cement for Acrylonitrile-Butadiene-

Styrene (ABS) Plastic Pipe and Fittings 1203.3.4 D 2241—96b Specification for Poly (Vinyl Chloride)(PVC) Pressure-Rated . . . . . .Table 1202.4 D 2282—96a Specification for Acrylonitrile-Butadiene-Styrene (ABS)

Plastic Pipe (SDR-PR) . Table 1202.4 D 2466—96a Specification for Poly (Vinyl Chloride)(PVC) Plastic Pipe

Fittings, Schedule 40 . .Table 1202.5 D 2467—96b Specification for Socket-Type Poly (Vinyl Chloride) (PVC)

Plastic Pipe Fittings, Schedule 80 . .Table 1202.5 D 2468—96a Specification for Acrylonitrile-Butadiene-Styrene (ABS)

Plastic Pipe Fittings, Schedule 40 . .Table 1202.5 D 2564—96a Specification for Solvent Cements for Poly (Vinyl Chloride)

(PVC) Plastic Pipe and Fittings 1203.3.4 D 2661-97 Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic

Drain, Waste, and Vent Pipe and Fittings .Table 513.2A D 2665-97a Poly(Vinyl Chloride)(PVC) Plastic Drain, Waste, and Vent

Pipe and Fittings .Table 513.2A D 2846/D2846M—96a Specification for Chlorinated Poly (Vinyl Chloride) (CPVC)

Plastic Hot and Cold Water Distribution Systems Table 1202.4, 1 D 2949-97 3.25-in. Outside Diameter Poly(Vinyl Chloride)(PVC)

Plastic Drain, Waste, and Vent Pipe and Fittings Table 513.2A D 2996—95 Specification for Filament-Wound Fiberglass (Glass

Fiber Reinforced Thermosetting Resin Pipe) . Table 1302.4 D 3278—96 Test Methods for Flash Point of Liquids by

Setaflash-Closed-Cup Apparatus 202 D 3309—96a Specification for Polybutylene (PB) Plastic Hot Water

Distribution Systems Table 1202.4, 1203.10.1 D 3311-94 Drain, Waste, and Vent (DWV) Plastic Pipe Fittings Patterns Table 513.2B Ε 84—97 Test Method for Surface Burning Characteristics

of Building Materials 202, 510.8, 602.2.1,603.1.7,603.15 ,604.3, 1204.1 Ε 136—96a Test Method for Behavior of Materials in a Vertical

Tube Furnace at 750°C 202 Ε 814—94b Test Method for Fire Tests of Through-Penetration Fire Stops . . . . 506.3.12



F 409-97

ASTM (continued)

Thermoplastic Accessible and Replaceable Plastic Tube And Tubular Fittings Table 513.2B

F 438—97 Specification for Socket Type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40 Table 1202.5

F 439—97 Specification for Socket Type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 Table 1202.5

F441/F441M—97 Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 Table 1202.4

F 442/F442M—97 Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe (SDR-PR) Table 1202.4, Table 1202.5

F 493—96 Specification for Solvent Cements for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe and Fittings 1203.3.4

F 628-97 Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with Cellular Core Table 513.2A

F 876—96a Specification for Crosslinked Polyethylene (PEX) Tubing Table 1202.4 F 877—97

F891-96a

Specification for Crosslinked Polyethylene (PEX) Plastic Hot and Cold-Water Distribution Systems

Coextruded Polyvinyl Chloride)(PVC) Plastic Pipe With Cellular Core

Table 1202.4 Table 1202.5

Table 513.2A

AWS American Welding Society 550 N.W. LeJeune Road P.O. Box 351040 Miami, FL 33135


Referenced in code

section number

A5.8—92 Specifications for Filler Metals for Brazing 1203.3.1, 1303.3.1

CODES Standard reference number Title

Referenced in code

section number

Florida Building Code, Building 101.1,201.3, 202, 301.2, 301.8, 301.13, 302.1, 304.5, 304.8, 308.8 403.6.6.3, 404.1, 504.2, 506.4.1, 510.6.1, 510.6.2, 510.7, 511.1.5, 604.1, 604.4, 606.2.1, 801.3, 801.16.1, 801.18.4, 902.1, 908.1, 90i 1106.5, 1204.1, 1204.2, 1206.4, 1301.2.2, 1402.3, 1402.3.1

Fire Prevention Code 201.3, 403.6.2, 502.4, 502.8

,308. 602.3, 1.3,91

509,

102.1, 101.4.

?(

10,' 6o: 0.3,

510

100 , 12( 11.3,

tO 1.4, 401.6,402.4, !.l, 603.8, 603.10, 1004.6, 1105.3,

.4, 1301.1, 1301.2, 1301.2.1

Florida Building Code, Plumhine 201.3. 301.9. 307.2.1. 512.2. 908.5. If

,308. 602.3, 1.3,91

509,

102.1, 101.4.

?(

10,' 6o: 0.3,

510

100 , 12( 11.3,

2.2, 1005.2, 1006.6, 1008.2,

Florida Building Code, Fue 1009.3, 1

1 Gas

,308. 602.3, 1.3,91

509,

102.1, 101.4.

?(

10,' 6o: 0.3,

510

100 , 12( 11.3,

)1.1, 1206.2, 1206.3, 1401.2 301.3, 801.1,901.1, 1101.5 Florida Building Code, Fue

10,' 6o: 0.3,

510

100 , 12( 11.3,



CSA Canadian Standards Association 178 Rexdale Blvd. Rexdale (Toronto), Ontario, Canada M9W 1R3

Standard Referenced reference in code number Title section number

Β 181.1-96 ABS Drain, Waste, and Vent Pipe and Pipe Fittings Table 513.2B CAN/CSA-B137.10—91 Crosslinked Polyethylene/Aluminum

Polyethylene Composite Pressure Pipe Systems Table 1202.4 CAN/CSA-B181.3—86 Polyolefin Laboratory Drainage Systems-with

Revisions through October 1990 Table 513.2A

FS Federal Specifications* General Services Administration 7th & D Streets Specification Section, Room 6039 Washington, DC 20407


WW-P-325B—76 Federal Specification for Pipe, Bends, Traps. Caps and Plugs; Lead (for Industrial Pressure, and Soil and Waste Applications) Table 1202.4

IIAR International Institute of Ammonia Refrigeration Suite 700 1101 Connecticut Ave., NW Washington, DC 20036


2—92 Equipment, Design, and Installation of Ammonia Mechanical Refrigerating Systems 1101.6

MSS Manufacturers Standardization Society of the Valve & Fittings Industry. Inc. 127 Park Street. N.E. Vienna. VA 22180


SP-69—96 Pipe Hangers and Supports 305.4



NAIMA North American Insulation Manufacturers Association Suite 310 44 Canal Center Plaza Alexandria, VA 22314


Referenced in code

section number

AH116—93 Fibrous Glass Duct Construction Standards 603.4

NFPA National Fire Protection Association Batterymarch Park Quincy, MA 02269


Referenced in code

section number

12—00 13—99 16—95

Carbon Dioxide Extinguishing Systems Installation of Sprinkler Systems Installation of Deluge Foam-Water Sprinkler Systems

509.3 509.3

509.3 17—98 Dry Chemical Extinguishing Systems 509.3 17A—98 31—97 33—95

Wet Chemical Extinguishing Systems Installation of Oil-Burning Equipment 920.2, 922.1. Spray Application Using Flammable and Combustible Materials

509.3 1301.2, 1308.1, 1401.2

502.4 34—95 Dipping and Coating Processes Using Flammable or

Combustible Liquids 502.4 37—94 Stationary Combustion Engines and Gas Turbines 915.1, 915.2 69—97 Explosion Prevention Systems 510.8.3 70—99 National Electrical Code 306.3.1, 303.6.4.1, 602.2.1, 1106.8, 1106.9 72—96 80-95

National Fire Alarm Code Fire Doors and Fire Windows

606.3, 607.3.3, 607.3.4 601.2

82—99 86-99

Incinerators, Waste and Linen Handling Systems and Equipment Standard for Ovens Furnaces

601.1 924.1

88B—95 Repair Garages 304.3, 708.2 90a-99 90b-99

Standard for the Installation of Air Conditioning and Ventilating Systems Standard for the Installation of Warm Air Heating and Air Conditioning Systems Exhaust Systems for Air Conveying of Materials

301.15 301.15

91—95

Standard for the Installation of Air Conditioning and Ventilating Systems Standard for the Installation of Warm Air Heating and Air Conditioning Systems Exhaust Systems for Air Conveying of Materials 511.1,502.12

96-98 211-00

Ventilation Control and Fire Protection of Commercial Cooking Equipment Standard for Chimneys, Fireplaces, Vents, and Woodworking Facilities

506.1 801.1

214-96 664-98

Standard on Water Cooling Towers Prevention of Fires and Explosions in Wood Processing and Woodworking Facilitie: Identification of the Fire Hazards of Materials for Emergency Response

908.1 ; 511.4

704—96

Standard on Water Cooling Towers Prevention of Fires and Explosions in Wood Processing and Woodworking Facilitie: Identification of the Fire Hazards of Materials for Emergency Response 510.1

8501—92 8502—95

Single Burner Boiler Operation Prevention of Furnace Explosions/Implosions in Multiple

Burner Boiler-Fumaces

1004.1

1004.1 8504—96 Atmospheric Fluidized-Bed Boiler Operation 1004.1



SMACNA Sheet Metal & Air Conditioning Contractors National Assoc, Inc. 4021 Lafayette Center Road Chantilly, VA 22021

Standard Referenced

reference in code

number Title section number

SMACNA--95 HVAC Duct Construction Standards—Metal and Flexible 603.3 SMACNA--92 Fibrous Glass Duct Construction Standards 603.4

STI Steel Tank Institute 570 Oakwood Road Lake Zurich, IL 60047


F841—91 Standard for Dual Wall Underground Steel Storage Tanks Table 1302.3

UL Underwriters Laboratories Inc. 333 Pfingsten Road Northbrook, IL 60062-2096


17—94 Vent or Chimney Connector Dampers for Oil-Fired 803.6

58—96 Steel Underground Tanks for Flammable and Combustible Liquids Table 1302.3 80—96 Steel Inside Tanks for Oil-Bumer Fuel Table 1302.3 103—95 Chimneys, Factory-Built, Residential Type and Building

Heating Appliance 805.2

127—96 Factory-Built Fireplaces 805.2,903.1 142—93 Steel Aboveground Tanks for Flammable and Combustible

Liquids—with Revisions thru April 1995 Table 1302.3 181—96 Factory-made Air Ducts and Air Connectors . . . .512.2, 603.4, 603.5, 603.5.6.2, 603.5.6.5,603.9.1,604.13 181 A—94 Closure Systems for Use with Rigid Air Ducts and Air

Connectors—with Revisions thru December 1994 603.1.7 181B-95 Closure Systems for use with Flexible Air Ducts and Air Connectors 603.1.7 207—93 Refrigerant-Containing Components and Accessories,

Nonelectrical—with Revisions thru March 1995 1101.2 300—96 Fire Testing of Fire Extinguishing Systems for Protection

of Restaurant Cooking Areas 509.3 303—87 Refrigeration and Air-Conditioning Condensing and

1101.2 391—95 Solid-Fuel and Combination-Fuel Central and Supplementary Furnaces 918.1 412—93 1101.2 443—95 Steel Auxiliary Tanks for Oil-Burner Fuel Table 1302.3 465—82 Central Cooling Air Conditioners—with Revisions thru

September 1993 1101.2



UL (continued)

555—95 Fire Dampers 607.1 555C—96 Ceiling Dampers 607.2 555S—96 Leakage Rated Dampers For Use in Smoke Control Systems 607.3 559—85 Heat Pumps 918.3 641—95 Low-Temperature Venting Systems. Type L 802.1 710—95 Exhaust Hoods for Commercial Cooking Equipment 507.1. 507.7 726—95 Oil-Fired Boiler Assemblies 916.1, 1004.1 727—94 Oil-Fired Central Furnaces—with Revisions thru January 1996 9181 729—94 Oil-Fired Floor Furnaces 910 1 730—94 Oil-Fired Wall Furnaces—with Revisions thru August 1995 909.1 731—95 Oil-Fired Unit Heaters 920.1 737—96 Fireplace Stoves 805.2. 905.1 791—93 Residential Incinerators 907.1 834—95 Heating, Water Supply, and Power Boilers—Electric—with

Revisions thru November 1995 1004.1 896—93 Oil-Burning Stoves—with Revisions thru January 1996 917.1. 922.1 910—95 Test for Cable Flame-Propagation and Smoke-Density Values

—with Revisions thru May 1995 602.2.1.1 959—94 Medium Heat Appliance Factory Built Chimneys 805.5 1046-79 Grease Filters for Exhaust Ducts 507.11.1 1096—86 Electric Central Air Heating Equipment—with Revisions

thru January 1988 918.1 1240—94 Electric Commercial Clothes Drying Equipment—with

Revisions thru February 1996 913.1 1316—94 Glass-Fiber-Reinforced Plastic Underground Storage

Tanks for Petroleum Products Table 1302.3 1482—94 Room Heaters, Solid-Fuel Type 905.1 1556—90 Electric Coin-Operated Clothes-Drying Equipment—with

Revisions thru November 1992 913.1 1777—95 Chimney Liners 801.16.1 1820—95 Fire Test of Pneumatic Tubing for Flame and Smoke Characteristics 602.2.1.3 1887—96 Fire Tests of Plastic Sprinkler Pipe for Flame and Smoke 602.2.1.2

Characteristics 1995—95 Heating and Cooling Equipment 911.1. 918.1.918.3. 1101.2 2043-92 Standard for Safety Fire Test for Heat and Visible Smoke Release for

Discrete Products and their Accessories Installed in Air-Handling Spaces 602.2.1

chapter 15 referenced standards - … 15 referenced standards this chapter lists the standards that...

Documents