chandan_dutta_cv
TRANSCRIPT
![Page 1: Chandan_Dutta_CV](https://reader038.vdocuments.site/reader038/viewer/2022100723/58f2160c1a28ab944b8b457d/html5/thumbnails/1.jpg)
Curriculum Vitae
PERSONAL PROFILE
Name: Chandan Dutta
Degree Program: B.Tech in Electronics & Instrumentation.
Current CGPA: 8.50
Date of Birth: 13th
of march1993
Gender: Male
Graduating in: Narula Institute of Technology.
CONTACT
Father’s Name : Chinmay Dutta
Mother’s Name : Chaitali Dutta
PERMANENT ADDRESS : Flat No : 2/1,Shrestha Appartement, Hill View colony, Dimna
Road, Mango Jamshedpur 831018.
E-Mail : [email protected]
Phone : 09679728844 and 08083581788
OBJECTIVE
Intend to build a career in the field of Electronics instrumentation & control engineering, which
will give me an opportunity to work on challenging problems in a tough competitive
environment. With my zeal to work hard, my career goal would be to put in my best efforts and
play a key role in the success of the organization.
STAGE
INSTITUTION
YEAR OF
PASSING
RESULTS
(%MARKS
OBTAINED)
B.TECH in Electronics &
Instrumentation Narula Institute of Technology June 2015
8.50/10.0
(Till 7th
semester)
Higher Secondary School
Education R.V.S Academy (ISC)
March
2011 78.50%
Secondary school Education Mount View School (ICSE) March
2009 73.60%
ACADEMIC CHRONICLE
![Page 2: Chandan_Dutta_CV](https://reader038.vdocuments.site/reader038/viewer/2022100723/58f2160c1a28ab944b8b457d/html5/thumbnails/2.jpg)
1. Training course on Advance PLC Programming & SCADA from Indo Danish Tool
Room Jamshedpur.
2. Vocational Training for one month in LD # 2 & Slab Caster department, TATA
STEEL Jamshedpur works.
1. Project on “Automatic Battery Testing Station“
Role : Programming in Simatic step 7 200 PLC .
Tool : Siemens Simatic Step 7 200 ,CPU 222.
Duration : 4 weeks.
Description : An electro pneumatic automatic battery testing kit using siemens micro
plc simatic step 7 200.
2. Project on “Flare Stack Monitoring System“
Role : Trainee (system analyser).
Tool : Williamson PRO 40 Series Infrared Sensor.
Duration : 4 weeks.
Description : Flare Stack monitoring system for waste gas disposal released from LD
vessel during primary steel making.
3. Final Year ProjectI on “Developement of Automated Agricultural Process Monitoring
and control Technology in an Enclosed System. “ Tools :NI LABVIEW, Simulation Interface Tool Kit and MATLAB.
Duration : 6 months.
Description :This project primirily focuses on remote monitoring and control of
diffrent physiochemical and physiologial parameters affecting the cultivation of different
crops.
4. Final Year Project II on “ Study the effect of cognitive task on HRV response. “
Tools :MATLAB, HRV data logger, Kubios HRV analysis software.
Duration : 6 months.
Description : This project basically deals with emperical analysis of HRV signal
obtained from different subject during pre cognitive and cognitive state and to establish a
statistical relationship between stress and HRV response deviation.
PUBLICATION
1. Development of Automated Agricultural Process Monitoring and Control
Technology in an Enclosed System IOSR Journal of Agriculture and Veterinary Science (IOSR-JAVS) e-ISSN: 2319-2380, p-ISSN:
2319-2372. Volume 8, Issue 4 Ver. II (Apr. 2015), PP 38-44 www.iosrjournals.org
PROFESSIONAL/ACADEMIC EXPERIENCE
DETAILS OF THE PROJECTS
![Page 3: Chandan_Dutta_CV](https://reader038.vdocuments.site/reader038/viewer/2022100723/58f2160c1a28ab944b8b457d/html5/thumbnails/3.jpg)
1. Control Theory.
2. Sensors & Transducer.
3. Process Control and Industrial Automation.
4. Industrial Instumentation.
1. Microsoft Office
2. Basic C Programming
3. Advance PLC Programming (Ladder Logic)
4. NI LABVIEW
5. MATLAB including Simulink
6. Cadsoft Eagle PCB design software (Basic level)
I hereby declare that the above mentioned is true to the best of my knowledge.
Name : Chandan Dutta
Date :
AREA OF INTEREST
Computer Proficiency