chainless anchoring 2

8/12/2019 Chainless Anchoring 2

1/4

4

Optional Wall Rack (No. 10020)

A N C H O R I N G

22000 EZE TIE DOWN SYSTEM

1 2 3

4 5 6

System Includes: 4 22049 EZE Tie Down Anchoring Towers 4 22029 EZE Tie Down Sill Clamps 4 22025 EZE Tie Down Strongbacks 12 20060 Wedges 4 22040 Rail Dogs 2 17101 Anchoring Bars 2 17900 Anchoring Rails (Not shown - see page 12) (System without anchoring rails #22100)

The EZE Tie Down System has been designed to do light pulls and panel pulls. It is idealfor quick pulls on radiator supports, sheetmetal alignments, door posts, etc. The EZETie Down System was specificaly developed to meet the demands of autobody shops foran Express production bay. This system hasbeen specifically designed to increase shopproductivity, job quality and technicianefficiency. The technician cancomplete light repairs andfinishing metal work ina single bay area,in the shortest timepossible.

Place EZE Tie DownAnchoring Towers over RailDogs and slide AnchoringTowers up to Anchoring Bars.

Insert EZE Tie DownStrongbacks through EZE TieDown Anchoring Towers andover Anchoring Bars.

Drive WedgesTie Down Stroand EZE Tie DAnchoring To

Youre ready-t

Center vehicle betweenAnchoring Rails. Install theEZE Tie-Down Sill Clamps atthe front and rear torque boxareas of the vehicle.

Slide Anchoring Bars throughEZE Tie Down Sill Clamps.Make sure Anchoring Barsare centered. Insert Wedgesinto EZE Tie Down Sill Clamps.Secure using a 3 lbs. hammer.

Slide Rail Doon Anchoring(front and rea

Wedge Clamps Anchoring Systemswere developed to meet the demandsof production shops while maximizing the use of available floor space. Theyhave been specifically designed to

increase shop efficiency by allowing technicians to complete all structuralrepairs and finishing sheet metal workin a single repair bay. Whether a shopis large or small, Wedge Clamp have

proven themselves worldwide to be the leading choice for increased shoproductivity.

Vehicles are quickly mounteNO floor jack required.

How It Works!


2/4

Chain Anchoring System mounted onOptional Wall Rack (No.10050)

5

92400 CHAINLESS ANCHORING SYSTEM

92300 CHAIN ANCHORING SYSTEM

System Includes:1 17000 Sill Clamp Set, set of 4

1 17100 Anchoring Bar Set, set of 4 2 x 72 in. (1828 mm) bars (17100A) 2 x 80 in. (2032 mm) bars (17100C)

4 17600 Chainless Anchoring Stand

2 17704 Surface Mounting Anchor Bolt Set

2 17900 Rail, Bevelled and Slotted

1 17011 Instruction Manual

System Includes:

1 17000 Sill Clamp Set, set of 4

1 17100 Anchoring Bar Set, set of 4 2 x 72 in. (1828 mm) bars (17100A) 2 x 80 in. (2032 mm) bars (17100C)

1 17200 Cinch Set, set of 6

1 17300 Floor Anchor Pot, set of 6

1 17400 Chain Stand Set, set of 4

1 17500 Chain Anchoring Set

1 17010 Instruction Manual

The Chain Anchoring System adapts to most existing floor pot and railconfigurations. This system includes the six chain cinches and the additionalchains to allow easy upgrading to Wedge Clamps Full Frame Kit foranchoring larger trucks. The anchoring stands feature two height settingoptions.

The Chainless Anchoring System anchors to compact rails mounted eitheron top of the floor or embedded flush into the concrete. The low-weightaluminum stands allow effortless set up. (shown with 15300 PivotMeasuring System)

Chainless Anchoring System mounted onOptional Wall Rack (No. 10050).


3/4

6

A N C H O R I N G

How fast can you handle a full sizetruck or SUV?

92800 FULL FRAME ANCHORING SYSTEM

Full Frame AnchoringSystem# 92800

Full Frame AnchoringAdapter Kit# 92850

As Sport Utility Vehicles (SUVs) and full size trucks become more prevalent on todaysroads, our commitment to product improvementhas focused on size as well as time.Wedge Clamp is the best solution when youneed a Full Frame Anchoring System!Wedge Clamp can accommodate larger fullframe vehicles, vastly improving productivityduring damage assessment and repair.Only the Wedge Clamp System uses a unique,patented universal 2-axis swivel clamp that is more adaptable to vehicle frameconfigurations. This means you will be able to set-up quicker and use fewer adaptersand parts. It is specifically designed so thatit is lightweight, yet strong as a result of thesolid box frame that is formed underneath the vehicle. It is also very versatiletheWedge Clamp Full Frame Anchoring Systemcan be mounted on the floor or on a framerack and it can be used in combination witha mid-rise lift.

2 7 ft. (2.13 m) Rails: Beveled & Slotted2 72 in. (1828 mm) Anchor Sidebars2 Frame Anchoring Beams4 Chainless Anchoring Stands4 Universal 2-Axis Swivel Clamps4 Swivel Clamp Bases72 Surface Mounting Bolts24 C Spacers4 Full Spacers4 Channel Adapters16 Wedges2 Leaf Spring Adapters4 C-Channel Adapters

1 Wall Storage Board

2 Frame Anchoring Beams4 Universal 2-Axis Swivel Cla4 Swivel Clamp Bases24 C Spacers4 Full Spacers4 Channel Adapters12 Wedges2 Leaf Spring Adapters4 C-Channel Adapters1 Wall Storage Board

If you have already invein a Wedge Clamp ChainAnchoring System we ha kit just for you. The Frame Anchoring Adapter Part #92850 integrates tadvancements into your exissystem at minimal cost.

Optional wall rack shown (10050)

(Shown with #15300Pivot Measuring System)

Patent No. 6745612


4/4

7

Set of four. Allows clamping ofboth horizontal pinchweld andvertical jacktab. Adjusts for height

and width. Anchors Honda andAcura models.

Set of four. Adjustable anchoringpins and side jackhole pins allowanchoring of BMW and Corvette

models (with or without jack tubes)

HondaAdapter Kit #15150

BMW/CorvetteAdapter Kit #15020

Set of four. Adjustable anchoringpins and side jackhole pins allowanchoring of Mercedes models

(with or without jack tubes)

MercedesAdapter Kit #15220

All Anchoring Adapters operate with the standard Wedge Clamp pinchweld clamp to provide secure four-pointanchoring for most unibody and frame vehicles. See Anchoring Adapter application charts (page 7) for specificvehicle applications.

ANCHORING ADAPTERS

Set of four brackets allowanchoring of vehicles with apinchweld spacing up to 77 in.*(1956 mm). Anchors very widevehicles such as GMs AstroVan and Fords Aerostar.*Note: When Anchor railsare spaced 72 in appart.

Set of four fit to each WedgeClamp jaw. Allows anchoring ofangled pinchwelds.

Wide BodyAdapter Kit #15000 Angle PinchweldAdapter Kit #17013

Set of two. Anchors Montana/Venture and Transport vanmodels at factory recommendedmounting points.

Montana/VentureAdapter Kit #15600

Adapts frame racks with 3 1/2posts to Wedge Clamp System.

Rack Adapter#93050

Adapts Chart System to WedgeClamp System.

Chart Rack Adapter#93060

chainless anchoring 2

Documents