cf range flo way

CF and CG DESCRIPTION: Vertical close coupled, single or multistage vertical turbine with closed suction and below ground discharge. Available with semi- open or enclosed impellers. APPLICATIONS: • Hi gh R ise Bui ldings • Fueling Ser vice • Bo os ter Pu mps • Condensate Pumps CAPACITY: To 600 GPM. PRESSURE: To 400 PSI. SETTING: Close coupled. LIQUID HANDLED: Water, Fuels, Hydrocar- bons, and Condensates. TEMPERATURE RANGE: -20°F to + 200°F. APPROX. HP RANGE: To 100 HP. DRIVERS: Electric Motors, and Variable Speed Drivers. MATERIALS OF CONSTRUCTION: Any machinable alloys available for column and b owls. Cast Iron/Bronze fitted (standard). “CF” and “CG” discharge heads are cast iron with bases machined and drilled to match A.N.S.I. flange dimen- sions. Ordinarily these heads are used in constant pressure systems in high-rise buildings, primary fueling service and fuel transferring. These fuel service pumps can be manufactured to meet Military Specification MIL- P-13386C. Type “CF” and “CG” units are also used in hot well and booster application. Mechanical seals are provided as the standard sealing arrangement, however, stuffing boxes are also available. Vertical hollow shaft (VHS) and vertical solid shaft (VSS) drivers, constant or variable speed, are available. When a VHS driven is chosen, a steady bushing is furnished. A flanged adjustable coupling is furnished for VSS motor. The barrel and column can be lengthened to meet low NPSH requirements. Motors stand N.E.M.A. Type “P” fit. Threaded coupling for VHS motor. Mechanical seal assembly. Seal bypass line for cooling and pressure relief. A.N.S.I. flanged discharge. Cast iron head. Connection of bowl to head for minimum barrel height (column is available). A.N.S.I. flanged base. A.N.S.I. Flanged suction. Suction barrel sized for hydraulic performance and mechanical rigidity. Type “CF” Pump Threaded bowls. Enclosed impellers (semi-open available). Floor mounting plate shown. For long bowl assemblies mounting above barrel base is required. Note: Maximum discharg e pres s ure 400 P S I (2758 kP a). Ma ximum suction pres s ure 100 P S I (689 k Pa).

Upload: raja-ramachandran

Post on 07-Oct-2015

5 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

DESCRIPTION

TRANSCRIPT

CF and CGDESCRIPTION: Vertical close coupled, singleor multistage vertical turbine with closed suctionand below ground discharge. Available with semi-open or enclosed impellers.

APPLICATIONS: High Rise Buildings Fueling Service Booster Pumps Condensate Pumps

CAPACITY: To 600 GPM.

PRESSURE: To 400 PSI.

SETTING: Close coupled.

LIQUID HANDLED: Water, Fuels, Hydrocar-bons, and Condensates.

TEMPERATURE RANGE:-20F to + 200F.

APPROX. HP RANGE: To 100 HP.

DRIVERS: Electric Motors, and Variable SpeedDrivers.

MATERIALS OF CONSTRUCTION: Anymachinable alloys available for column and bowls.Cast Iron/Bronze fitted (standard).

CF and CG discharge heads are cast iron with basesmachined and drilled to match A.N.S.I. flange dimen-sions. Ordinarily these heads are used in constantpressure systems in high-rise buildings, primary fuelingservice and fuel transferring. These fuel service pumpscan be manufactured to meet Military Specification MIL-P-13386C. Type CF and CG units are also used in hotwell and booster application. Mechanical seals areprovided as the standard sealing arrangement, however,stuffing boxes are also available.

Vertical hollow shaft (VHS) and vertical solid shaft (VSS)drivers, constant or variable speed, are available. Whena VHS driven is chosen, a steady bushing is furnished. Aflanged adjustable coupling is furnished for VSS motor.

The barrel and column can be lengthened to meet lowNPSH requirements.

Motors stand N.E.M.A. TypeP fit.

Threaded coupling for VHSmotor.

Mechanical seal assembly.

Seal bypass line forcooling and pressure relief.

A.N.S.I. flanged discharge.

Cast iron head.

Connection of bowl to headfor minimum barrel height(column is available).

A.N.S.I. flanged base.

A.N.S.I. Flanged suction.

Suction barrel sized forhydraulic performance andmechanical rigidity.

Type CF Pump

Threaded bowls.

Enclosed impellers(semi-open available).

Floor mounting plateshown. For long bowlassemblies mountingabove barrel base isrequired.

Note: Maximum dischargepressure 400 PSI (2758kPa). Maximum suctionpressure 100 PSI (689 kPa).