certificates device platform raptor - r. stahl · 8 jpnex certificate 30 9 nec certificate 34 10...

Certificates

Device platform RAPTOR

ET-208

SERIES 200 Operator Interfaces

HW-Rev. ET-208-TX-*-DC: 01.00.14 HW-Rev. ET-208-TX-*-AC: 01.00.23 HW-Rev. ET-208-TX-W00-DC-GLN: 01.00.31 HW-Rev. ET-208-TX-W00-AC-GLN: 01.00.40

Certificates version: 01.00.07 Issue: 18.08.2020

Certificates SERIES 200 Disclaimer

of 44 R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020

Disclaimer

Publisher and copyright holder: R. STAHL HMI Systems GmbH Adolf-Grimme-Allee 8 D 50829 Köln Telephone: (Sales Support) +49/(0)221/ 76 806 - 1000 (Technical Support) - 5000 Fax: - 4100 E-mail: (Sales Support) [email protected] (Technical Support) [email protected]

• All rights reserved. • This document may not be reproduced in whole or in part except with the written

consent of the publisher. • This document may be subject to change without notice.

Any warranty claims are limited to the right to demand amendments. Liability for any damage that might result from the content of this description or all other documentation is limited to clear cases of premeditation. We reserve the right to change our products and their specifications at any time, provided it is in the interest of technical progress. The information in the current manual (in the internet and on CD / DVD / USB stick) or in the operating instructions included with the HMI device applies. Trademarks The terms and names used in this document are registered trademarks and / or products of the companies in question. Copyright © 2020 R. STAHL HMI Systems GmbH. Subject to alterations.

mailto:[email protected]


Table of contents Certificates SERIES 200

R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020 of 44

Table of contents

Description Page

Disclaimer 2

Table of contents 3

1 Preface 4

2 ATEX EC type examination certificate 5

3 IECEx certificate 9

4 EAC certificate 14

5 PESO certificate 22

6 CNEX certificate 25

7 KGS certificate 30

7.1 KCC certification 32

8 JPNEx certificate 34

9 NEC certificate 38

10 CEC certificate 39

11 DNV / GL certificate 40

12 Release Notes 43

Certificates SERIES 200 Preface


1 Preface

This document contains all valid certificates for the HMI devices of the SERIES 200 - device platform RAPTOR. All certificates are also available on R. STAHL's website and on the CDs / DVDs / USB sticks included in the delivery and a copy can also be ordered from R. STAHL HMI Systems GmbH.

NOTICE

ATEX EC type examination certificate Certificates SERIES 200


2 ATEX EC type examination certificate

Certificates SERIES 200 ATEX EC type examination certificate


ATEX EC type examination certificate Certificates SERIES 200


Certificates SERIES 200 ATEX EC type examination certificate


IECEx certificate Certificates SERIES 200


3 IECEx certificate

Certificates SERIES 200 IECEx certificate


Certificates SERIES 200 EAC certificate


4 EAC certificate

EAC certificate Certificates SERIES 200


Certificates SERIES 200 PESO certificate


5 PESO certificate

PESO certificate Certificates SERIES 200


Certificates SERIES 200 PESO certificate


CNEX certificate Certificates SERIES 200


6 CNEX certificate

Certificates SERIES 200 CNEX certificate


Certificates SERIES 200 KGS certificate


7 KGS certificate

KGS certificate Certificates SERIES 200


Certificates SERIES 200 KGS certificate


7.1 KCC certification

KGS certificate Certificates SERIES 200


Certificates SERIES 200 JPNEx certificate


8 JPNEx certificate

JPNEx certificate Certificates SERIES 200


Certificates SERIES 200 JPNEx certificate


JPNEx certificate Certificates SERIES 200


Certificates SERIES 200 NEC certificate


9 NEC certificate

Not version: ET-208-TX-W00-AC-GL (see operating instruction)

CEC certificate Certificates SERIES 200


10 CEC certificate

Not version: ET-208-TX-W00-AC-GL (see operating instruction)

Certificates SERIES 200 DNV / GL certificate


11 DNV / GL certificate

only version: ET-208-TX-W00-AC-GL

DNV / GL certificate Certificates SERIES 200


Certificates SERIES 200 DNV / GL certificate


Release Notes Certificates SERIES 200


12 Release Notes

The chapter entitled "Release Notes" contains all the changes made in every version of the certificates. Version 01.00.00

First edition for ET-208 devices

Version 01.00.01

Using of new name device platform Manta

Changing of address and phone numbers

Changing of HW revision

Removal of sentence "Microsoft Corporation" in Trademarks"

Addition of TR certificate Version 01.00.02

Renew of TR (EAC) certificate

Formal corrections Version 01.00.03

Addition of PESO certificate


Addition of CNEX certificate


Addition of KGS certificate


Changing disclaimer, new mail addresses

Adaption address field verso

Changing HW Rev at cover

Addition of ET-208-TX-W00-DC-GLN device version

Addition of JPNEx (Japan) certification

Addition of UL approval (NEC / CEC) for device version ET-208-TX-W00-DC-GLN


Changing layout cover

Adaption HW Rev at cover to operating instructions

Renew of EAC certificate

Changing notice at NEC / CEC certification

Addition of DNV / GL certification for version ET-208-TX-W00-AC-GL

Formal changes

R. STAHL HMI Systems GmbH Adolf-Grimme-Allee 8 D 50829 Köln T: (Sales Support) +49 221 768 06 - 1000 (Technical Support) +49 221 768 06 - 5000 F: +49 221 768 06 - 4100 E: (Sales Support) [email protected] (Technical Support) [email protected] r-stahl.com exicom.de



http://www.r-stahl.com/

http://www.exciom.de/

certificates device platform raptor - r. stahl · 8 jpnex certificate 30 9 nec certificate 34 10...

Documents