certificate of accreditationthaiheartcal.com/wp-content/uploads/2019/10/anab-225490_213594… ·...

This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory

quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017).

CERTIFICATE OF ACCREDITATION ANSI National Accreditation Board

11617 Coldwater Road, Fort Wayne, IN 46845 USA

This is to certify that

Thai Heart Calibration Co., Ltd. 2299/12-13 Moo 4 Theparak

Muang, Samutprakarn 10270 Thailand has been assessed by ANAB and meets the requirements of international standard

ISO/IEC 17025:2017 while demonstrating technical competence in the field of

CALIBRATION Refer to the accompanying Scope of Accreditation for information regarding the types of

activities to which this accreditation applies

AC-2695 Certificate Number

Certificate Valid Through: 08/09/2021

Version No. 001 Issued: 08/09/2019

Version 001 Issued: August 09, 2019 www.anab.org

Page 1 of 28

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017

Thai Heart Calibration Co., Ltd. 2299/12-13 Moo 4 Theparak,

Muang, Samutprakarn 10270, Thailand Ekachai Puttitwong, [email protected], 6689-692-1759

CALIBRATION

Valid to: August 9, 2021 Certificate Number: AC-2695

Acoustics and Vibration

Parameter/Equipment Range Expanded Uncertainty of Measurement (+/-)

Reference Standard, Method, and/or

Equipment

1Digital Sound Level Meter 94 dB, 114 dB 0.2 dB

Extech 407766 Sound Level Calibrator

Extech 407736 Sound Level Meter

Chemical Quantities



Equipment

1Refractometer (Solution) - %Brix

5 %Brix 10 %Brix 20 %Brix 30 %Brix 40 %Brix 50 %Brix 60 %Brix

0.012 %Brix 0.012 %Brix 0.012 %Brix 0.012 %Brix 0.012 %Brix 0.012 %Brix 0.012 %Brix

Sucrose Standard Solution

1Refractometer (Solution)

-Refractive Index

1.340 26 nD 1.347 82 nD 1.363 84 nD 1.381 15 nD 1.399 86 nD 1.420 09 nD 1.441 93 nD

0.000 071 nD 0.000 071 nD 0.000 071 nD 0.000 071 nD 0.000 071 nD 0.000 071 nD 0.000 071 nD

Sucrose Standard Solution

http://anab.org/

mailto:[email protected]


Page 2 of 28

Chemical Quantities



Equipment 1Refractometer

(Compare) - %Brix

-Refractive Index

(0 to 60) %Brix

(1.332 99 to 1.441 93) nD

0.1 %Brix

0.000 14 nD

Standard Refractometer

Hydrometer - Specific Gravity

- API

- Baume

- %Alcohol

(0.700 to 1.790) g/cm3

(29 to 70) API

(1 to 63) Baume

(1 to 100) %Alcohol

0.000 86 g/cm3

0.062 API

0.058 Baume

0.58 %Alcohol

Standard Hydrometer

Beaker

(0 to 5) ml (>5 to 10) ml

(>10 to 20) ml (>20 to 50) ml (>50 to 100) ml (>100 to 200) ml (>200 to 500) ml

(>500 to 1 000) ml (>1 000 to 2 000) ml

0.58 µl 1.2 µl 2.3 µl 5.7 µl

0.012 ml 0.024 ml 0.061 ml 0.13 ml 0.24 ml

Analytical Balance

Cylinder

(0 to 10) ml (>10 to 50) ml (>50 to 100) ml (>100 to 500) ml

(>500 to 1 000) ml (>1 000 to 2 000) ml

1.3 µl 6.0 µl

0.012 ml 0.06 ml 0.12 ml 0.24 ml

Analytical Balance

Dispenser

(0 to 1) ml (>1 to 5) ml (>5 to 10) ml (>10 to 25) ml (>25 to 50) ml

(>50 to 100) ml

0.074 µl 0.28 µl 0.55 µl 1.4 µl 2.7 µl 5.4 µl

Analytical Balance

Piston Burette

(0 to 1) ml (>1 to 5) ml (>5 to 10) ml (>10 to 25) ml (>25 to 50) ml

0.074 µl 0.28 µl 0.55 µl 1.4 µl 2.7 µl

Analytical Balance

http://anab.org/


Page 3 of 28

Chemical Quantities



Equipment

Micropipette

(0 to10) µl (>10 to 20) µl (>20 to 100) µl

(>100 to 500) µl (>500 to 1 000) µl

(>1 000 to 5 000) µl (>5 000 to 10 000) µl

(>10 000 to 20 000) µl

0.017 µl 0.018 µl 0.019 µl 0.034 µl 0.058 µl 0.27 µl 0.54 µl 1.1 µl

Analytical Balance

1Gas detector, Gas analyzer - Gas detector

Oxygen in nitrogen

1 cmol/mol 18 cmol/mol 21 cmol/mol

1.1 % of reading 1.1 % of reading 1.1 % of reading

Standard Mixture Gas

Carbon monoxide in nitrogen

Methane in air

-Gas analyzer Oxygen in nitrogen

Carbon monoxide in nitrogen

80 µmol/mol 300 µmol/mol

2.2 cmol/mol

1 cmol/mol 18 cmol/mol 21 cmol/mol

80 µmol/mol

300 µmol/mol 1 000 µmol/mol

2.1 % of reading 1.1 % of reading

2.1 % of reading



Standard Mixture Gas

Electrical – DC/Low Frequency



Equipment 1Oscilloscope

Vertical Deflection (Amplitude)

- Input Impedance 1 MΩ - Input Impedance 50 Ω

Square Wave

1 mV/div to 10 V/div 1 mV/div to 5 V/div


Tektronix CG5010 Calibration Generator

(Volt Mode) Programmable Pulse Head

http://anab.org/


Page 4 of 28




Equipment

1Oscilloscope Horizontal Deflection (Time)

2 ns/div 5 ns/div 10 ns/div 20 ns/div 50 ns/div 100 ns/div 200 ns/div 500 ns/div 1 µs/div 2 µs/div 5 µs/div

10 µs/div 20 µs/div 50 µs/div 100 µs/div 200 µs/div 500 µs/div 1 ms/div 2 ms/div 5 ms/div 10 ms/div 20 ms/div 50 ms/div

100 ms/div 200 ms/div 500 ms/div

1 s/div 2 s/div 5 s/div

0.000 58 ns 0.000 58 ns 0.005 8 ns 0.005 8 ns 0.005 8 ns 0.058 ns 0.058 ns 0.058 ns

0.000 58 µs 0.000 58 µs 0.000 58 µs 0.0058 µs 0.0058 µs 0.0058 µs 0.058 µs 0.058 µs 0.058 µs

0.00058 ms 0.00058 ms 0.00058 ms 0.0058 ms 0.0058 ms 0.0058 ms 0.058 ms 0.058 ms 0.058 ms 0.058 ms 0.058 ms 0.058 ms

Tektronix CG5010 Calibration Generator (Time Maker Mode)

Programmable Pulse Head

1Handheld LCR Meter

(0.01 to 1 000) Ω (1 to 1 000) kΩ (1 to 1 000) MΩ (1 to <10) MΩ

(10 to < 100) MΩ (100 to 1 000) MΩ

0.063 Ω 0.064 kΩ 13 MΩ

0.058 MΩ 1.1 MΩ 13 MΩ

Agilent 3458A Multimeter, Decade Resistance

http://anab.org/


Page 5 of 28




Equipment

1Handheld LCR Meter Capacitance

@ 1 kHz (0 to < 200) pF

(200 to < 400) pF (400 to < 600) pF (600 to < 800) pF (800 to 1000) pF (1 to < 200) nF

(200 to < 400) nF (400 to < 600) nF (600 to < 800) nF

(800 to < 1 000) nF

8.1 pF 17 pF 27 pF 36 pF 45 pF 9.2nF 18 nF 28 nF 37 nF 46 nF

Hewlett Packard 4263B LCR Meter, Capacitance

Standards

1Handheld LCR Meter Inductance

@ 1 kHz (0 to < 20) mH (20 to < 40) mH (40 to < 60) mH (60 to < 80) mH

(80 to < 100) mH (100 to < 200) mH (200 to < 400) mH (400 to < 600) mH (600 to < 800) mH (800 to 1 000) mH

0.44mH 0.9 mH 1.4 mH 1.8 mH 2.3 mH 4.6 mH 9.2 mH 14 mH 18 mH 23 mH

Hewlett Packard 4263B LCR Meter, Inductance

Standards

1Insulation Tester (at 100 V, 250 V, 500 V, and

1,000 V)

100 kΩ to 1 MΩ (>1 to 10) MΩ

(>10 to 100) MΩ >100 MΩ to 1 GΩ

(>1 to 10) GΩ

140 µΩ/Ω 200 µΩ/Ω 700 µΩ/Ω

1 200 µΩ/Ω 2 500 µΩ/Ω

IET HRRS-Q-9-10-10 kV Decade Resistor

1Electrostatic Field Meter

(0 to 2) kV (2 to 4) kV (4 to 6) kV (6 to 8) kV

(8 to 10) kV

0.013 kV 0.024 kV 0.035 kV 0.047 kV 0.058 kV

K Jin R Li KC-2671A Withstanding Voltage

Tester, Kikusui 149-10A Voltmeter

1Inductance Substituter (1 to 1 000) mH 1.07 mH Hewlett Packard 4263B

LCR Meter 16089B Kelvin clip

1Capacitance Substituter (10 to 1 000) pF (1 to 1 000) nF

0.70 pF 0.70 nF

Hewlett Packard 4263B LCR Meter

16089B Kelvin clip

http://anab.org/


Page 6 of 28




Equipment

1AC/DC Current Source (>0 to 1 500) A 0.3 % of reading Fluke 289 Multimeter,

Fluke 8846A Multimeter Current Shunt

1AC/DC Current Source (>0 to 1500) A @ 50 Hz

0.31 % of reading

Fluke 8846A Multimeter Current Shunt

Electrical – RF/Microwave



Equipment

Bandwidth 100 kHz to 26.5 GHz 0.25 dB

Agilent 8482A Agilent 8485A Power Sensors

Agilent E4418A Power Meter, Agilent 11667B

Splitter 1RF Power - Measure

RF Power Reference at 1 mW 1 mW reference

50 MHz

0.5 % of reading

Agilent 8478B Power Sensor, HP 432A Power

Meter

1RF Power: (-30 to 20) dBm

100 kHz to 4.2 GHz (>4.2 to 18) GHz

(>18 to 26.5) GHz

0.14 dB 0.2 dB

0.25 dB

Agilent 8485A Power Sensor, Agilent E4418A

Power Meter

1,2Tuned RF Power - Measure 100 kHz to 26.5 GHz

0 dBm -10 dBm -20 dBm -30 dBm -40 dBm -50 dBm -60 dBm -70 dBm -80 dBm -90 dBm

0.033 dB+M 0.057 dB+M 0.07 dB+M 0.09 dB+M 0.11 dB+M 0.14 dB+M 0.16 dB+M 0.18 dB+M 0.2 dB+M 0.23 dB+M

HP 8902A Measuring Receiver

HP 11793A Power Sensor HP 11722A Power Sensor HP 11792A Power Sensor

1Frequency Response - Flatness

(-10 to 10) dB 100 kHz to 5 GHz > 5 GHz to 9 GHz > 9 GHz to 17 GHz

>17 GHz to 26.5 GHz

0.17 dB 0.18 dB 0.2 dB

0.22 dB

Agilent 8482A, Agilent 8485A Power Sensors

Agilent E4418A Power Meter, Agilent 11667B

Splitter

http://anab.org/


Page 7 of 28




Equipment 1Distortion - Measure

Fundamental Frequencies 400 Hz and 1 kHz

(0.01 to 100) %Distortion 0.15 %Distortion HP 8902A Measuring Receiver

1Amplitude Modulation - Measure

150 kHz to 10 MHz 150 kHz to 10 MHz

10 MHz to 1.3 GHz 10 MHz to 1.3 GHz

1.3 GHz to 26.5 GHz

1.3 GHz to 26.5 GHz

Rate: 50 Hz to 10 kHz Rate: 20 Hz to 10 kHz

Depth: 5% to 99% Rate: 50 Hz to 50 kHz Rate: 20 Hz to 100 kHz

Depth: 5% to 99% Rate: 50 Hz to 50 kHz

Depth: 5% to 99% Rate: 20 Hz to 100 kHz

Depth: 5% to 99%

2.2 % Depth 3.2 % Depth

1.2 % Depth 3.2 % Depth

1.7 % Depth

3.2 % Depth



1Frequency Modulation - Measure

150 kHz to 10 MHz

10 MHz to 1.3 GHz

10 MHz to 1.3 GHz

10 MHz to 26.5 GHz

10 MHz to 26.5 GHz

Rate: 20 Hz to 10 kHz Dev: ≤40 kHzpeak





2.6 % of reading

1.4 % of reading

6.1 % of reading

1.4 % of reading

6.1 % of reading



Phase Modulation 250 kHz to 10 MHz 10 MHz to 26.5 GHz

Dev: 20 Hz to 10 kHz

Rate: 50 Hz to 100 kHz

5 % of reading

3.8 % of reading



1RF Power - Source

3 µW 10 µW 30 µW 100 µW 300 µW 1 mW 3 mW 10 mW 30 mW 100 mW

0.01 µW 0.03 µW 0.1 µW 0.3 µW 1 µW

0.003 mW 0.009 mW 0.03 mW 0.1 mW 0.3 mW

HP 11683A Range Calibrator

http://anab.org/


Page 8 of 28




Equipment 1Display Average Noise Level

- Average Noise Level (-130 to 0) dBm

9 kHz to 26.5 GHz 12 dB Keysight 85052B

Calibration Kit (50 Ohm Match)

1Input Attenuator Accuracy (0 to 70) dB 9 kHz to 26.5 GHz 1.1 dB Agilent E4421B, HP

8340A Signal Generators Resolution Bandwidth - Bandwidth Switching

(-30 to 10) dB RBW: 300 Hz to 3MHz 0.24 dB Cable and Adapter

Scale Fidelity Accuracy - Logarithmic scale 1 dB/Step - Logarithmic scale 10 B/Step

- Linear scale

(>0 to 80) dB 9 kHz to 26.5 GHz

0.15 dB 0.15 dB

3.5 % of reading

Agilent E4421B, HP 8340A Signal Generators

Length – Dimensional metrology



Equipment

1Holtest / Three-Point Internal Micrometer

(6 to 8) mm (8 to 10) mm (10 to 12) mm (12 to 16) mm (16 to 20) mm (20 to 25) mm (25 to 30) mm (30 to 40) mm

1 µm 1.5 µm 1.5 µm 1.2 µm 1.5 µm 1.3 µm 1.2 µm 1.2 µm

Plain Ring Gauge

1Holtest / Three-Point Internal Micrometer

(40 to 50) mm (50 to 63) mm (62 to 75) mm (75 to 88) mm

(87 to 100) mm (100 to 125) mm (125 to 150) mm

1.7 µm 1.1 µm 1.1 µm 1.3 µm 1.6 µm 1.6 µm 1.6 µm

Plain Ring Gauge

1Can Seam Micrometer (0 to 13) mm 0.6 µm Gauge Block Set 1Dial and Digital Test

Indicator Up to 1.6 mm 2.4 µm Dial Gauge Tester

1Dial and Digital Indicator Up to 25 mm 2.4 µm Dial Gauge Tester

http://anab.org/


Page 9 of 28




Equipment

1Vernier, Dial and Digital Height Gauge

(0 to 200) mm (>200 to 300) mm (>300 to 450) mm (>450 to 600) mm

(>600 to 1 000) mm

0.78 µm 0.96 µm 1.4 µm 1.7 µm 3.9 µm

Gauge Block Set

1Dial and Digital Thickness Gauge


0.59 µm 0.6 µm 0.61 µm 0.65 µm

Gauge Block Set

1Vernier, Dial and Digital Depth Gauge

(0 to 20) mm (>20 to 50) mm (>50 to 100) mm (>100 to 150) mm (>150 to 200) mm (>200 to 300) mm (>300 to 600) mm

0.3 µm 0.61 µm 0.65 µm 0.71 µm 2.4 µm 2.5 µm 2.8 µm

Gauge Block Set

1Coating Thickness Gauge

(0 to 0.5) mm (>0.5 to 1) mm

(>1 to 1.25) mm (>1.25 to 1.5) mm

(>1.5 to 3) mm

0.52 µm 0.54 µm 0.55 µm 0.56 µm 0.66 µm

Standard Foils

1Ultrasonic Thickness Gauge

(0 to 20) mm (>20 to 50) mm (>50 to 100) mm

0.59 µm 0.61 µm 0.65 µm

Gauge Block Set

1Micrometer

(0 to 25) mm (>25 to 50) mm (>50 to 75) mm (>75 to 100) mm (>100 to 125) mm (>125 to 150) mm (>150 to 175) mm (>175 to 200) mm (>200 to 250) mm (>250 to 300) mm (>300 to 400) mm (>400 to 500) mm (>500 to 600) mm (>600 to 700) mm (>700 to 800) mm (>800 to 900) mm

(>900 to 1 000) mm

0.12 µm 0.61 µm 0.64 µm 0.65 µm 0.68 µm 0.71 µm 0.75 µm 0.78 µm 0.86 µm 0.96 µm 1.2 µm 1.4 µm 1.7 µm 1.9 µm 2.1 µm 2.4 µm 2.6 µm

Gauge Block Set

http://anab.org/


Page 10 of 28




Equipment

1Vernier, Dial and Digital Caliper (External, Internal and Depth Measurement)


(>600 to 1 000) mm (>1 000 to 1 500) mm (>1 500 to 2 000) mm

3 µm 5.8 µm 5.9 µm 6 µm

6.4 µm 7 µm

7.7 µm

Gauge Block Set

1Roughness Tester

Ra 0.43 µm Ra 1.569 µm Ra 2.93 µm

Rz 1.8 µm

Rz 3.641 µm Rz 11.4 µm

0.044 µm 0.045 µm 0.045 µm

0.16 µm 0.16 µm 0.17 µm

Roughness Specimen

1Bore Gauge / Cylinder Gauge

(0 to 10) mm (> 10 to 18) mm (>18 to 35) mm (>35 to 60) mm

(>60 to 100) mm (>100 to 160) mm (>160 to 250) mm (>250 to 400) mm (>400 to 600) mm (>600 to 800) mm

0.25 µm 0.28 µm 0.26 µm 0.3 µm 0.38 µm 0.52 µm 0.67 µm 1.1 µm 1.6 µm 2.1 µm

Gauge Block Set

1Dial and Digital Caliper Gauge for External

Measurement

(0 to 20) mm (>20 to 40) mm (>40 to 60) mm (> 60 to 70) mm (>70 to 90) mm

(>90 to 100) mm (>100 to 150) mm

0.59 µm 0.6 µm 0.61 µm 0.62 µm 0.64 µm 0.65 µm 0.71 µm

Gauge Block Set

1Dial and Digital Caliper Gauge for Internal

Measurement

(0 to 20) mm (>20 to 40) mm (>40 to 60) mm (> 60 to 70) mm (>70 to 90) mm

(>90 to 100) mm (>100 to 150) mm

0.59 µm 0.6 µm 0.61 µm 0.62 µm 0.64 µm 0.65 µm 0.71 µm

Gauge Block Set

http://anab.org/


Page 11 of 28




Equipment

1Depth Micrometer

(0 to 25) mm (>25 to 50) mm (>50 to 75) mm

(>75 to 100) mm (>100 to 125) mm (>125 to 150) mm

0.59 µm 0.61 µm 0.64 µm 0.65 µm 0.68 µm 0.71 µm

Gauge Block Set

Roller Counter

(0 to 100) mm (> 100 to 200) mm (>200 to 300) mm (>300 to 400) mm (>400 to 500) mm (>500 to 600) mm (>600 to 700) mm (>700 to 800) mm (>800 to 900) mm

(>900 to 1 000) mm (>1 000 to 5 000) mm (>5 000 to 9 000) mm (>9 000 to 9 999) mm

0.58 m 1.2 m 1.7 m 2.3 m 2.9 m 3.5 m 4 m

4.6 m 5.2 m 5.8 m 29 m 52 m 58 m

Universal Length Measuring Machine

Surface Plate ≤ 300 mm2 1.4 µm Lever Probe with Display

1Level Gauge (0 to 25) mm 2.9 µm Gauge Block Set

Precision Square


1.1 µm 1.6 µm 1.9 µm 3 µm

Gauge Block Set

1Bench Center (0 to 150) mm 2.2 µm Test Bar and Dial Test Indicator

Offset Centerline Caliper (0 to 300) mm 2.7 µm Gauge Block Set and Profile Projector

Indicating Micrometer


0.59 µm 0.61 µm 0.64 µm 0.65 µm

Gauge Block Set

http://anab.org/


Page 12 of 28




Equipment

Caliper Checker, Check Master, and Step Gauge

(0 to 20) mm (> 20 to 50) mm

(> 50 to 100) mm (> 100 to 150) mm (> 150 to 200) mm (> 200 to 300) mm (> 300 to 400) mm (> 400 to 500) mm (> 500 to 600) mm (> 600 to 700) mm (> 700 to 800) mm (> 800 to 900) mm

(> 900 to 1 000) mm

0.35 µm 0.36 µm 0.4 µm 0.44 µm 0.48 µm 0.59 µm 0.71 µm 0.83 µm 0.91 µm 1.1 µm 1.2 µm 1.3 µm 1.4 µm

Gauge Block and Lever Probe

with Display

Feeler Gauge, Thickness Gauge (0 to 5) mm 0.16 µm Universal Length

Measuring Machine

Micrometer Standard, Setting Rod

(0 to 25) mm (> 25 to 50) mm (> 50 to 75) mm

(> 75 to 100) mm (> 100 to 125) mm (> 125 to 150) mm (> 150 to 175) mm (> 175 to 200) mm (> 200 to 225) mm (> 225 to 250) mm (> 250 to 275) mm (> 275 to 300) mm (> 300 to 325) mm (> 325 to 350) mm (> 350 to 375) mm (> 375 to 400) mm

0.18 µm 0.29 µm 0.39 µm 0.52 µm 0.63 µm 0.74 µm 0.86 µm 0.97 µm 1.1 µm 1.3 µm 1.3 µm 1.5 µm 1.6 µm 1.7 µm 1.9 µm 2 µm

Gauge Block and Universal Length Measuring Machine

Micrometer Standard, Setting Rod

(> 400 to 425) mm (> 425 to 450) mm (> 450 to 475) mm (> 475 to 500) mm

2 µm 2.1 µm 2.4 µm 2.4 µm


http://anab.org/


Page 13 of 28




Equipment Thread Plug Gauge

(Pitch Dimeter)

(Major Diameter Measurement)

(0 to 10) mm (> 10 to 20) mm (> 20 to 30) mm (> 30 to 40) mm (> 40 to 50) mm (> 50 to 60) mm (> 60 to 70) mm (> 70 to 80) mm (> 80 to 90) mm

(> 90 to 100) mm (> 100 to 125) mm (> 125 to 150) mm

(0 to 10) mm

(> 10 to 20) mm (> 20 to 30) mm (> 30 to 40) mm (> 40 to 50) mm (> 50 to 60) mm (> 60 to 70) mm (> 70 to 80) mm (> 80 to 90) mm

(> 90 to 100) mm (> 100 to 125) mm (> 125 to 150) mm

0.43 µm 0.6 µm 0.61 µm 0.63 µm 0.64 µm 0.66 µm 0.69 µm 0.72 µm 0.89 µm 0.91 µm 0.98 µm 1.1 µm



Optical Flat Up to 60 mm diameter (0 to 10) µm 0.09 µm Optical Flat

Optical Parallel (12.00 to 25.37) mm diameter

(Flatness) (Parallelism) (Thickness)

(0 to 10) µm (0 to 20) µm

(0 to 25.37) mm

0.08 µm 0.04 µm 0.24 µm

Gauge Block Comparator, Universal Length

Measuring Machine, and Optical Flat

Height Master (0 to 310) mm

(> 310 to 460) mm (> 460 to 610) mm

0.6 µm 0.77 µm 0.93 µm

Gauge Block and Lever Probe with Display

Sphere and Precision Balls (0 to 10) mm (>10 to 20) mm

0.17 µm 0.27 µm

Universal Length Measuring Machine

http://anab.org/


Page 14 of 28




Equipment Thread Ring Gauge

(Pitch Diameter Measurement)

(Minor Diameter

Measurement)

(3 to 50) mm (> 50 to 100) mm (> 100 to 150) mm

(3 to 50) mm

(> 50 to 100) mm (> 100 to 150) mm

0.67 µm 0.93 µm 1.1 µm

0.53 µm 0.67 µm 0.83 µm

Ring Gauge and Universal Length Measuring Machine

Thread Ring Gauge (Minor Diameter

Measurement) (3 to 100) mm 0.82 µm Profile Projector

Depth Micro Checker (Anvil Block) (0 to 25) mm 0.06 µm Gauge Block and Gauge

Block Comparator Depth Micro Checker

(Block Pitch) (0 to 150) mm

(> 150 to 300) mm 0.45 µm 0.59 µm

Gauge Block and Lever Probe with Display

Taper Thread Plug Gauge (0 to 50) mm

(> 50 to 100) mm (> 100 to 150) mm

0.59 µm 0.71 µm 0.87 µm


Taper Thread Ring Gauge (5 to 50) mm

(> 50 to 100) mm (> 100 to 150) mm

0.59 µm 0.71 µm 0.87 µm


Taper Plug Gauge (0 to 50) mm

(> 50 to 100) mm (> 100 to 150) mm

0.33 µm 0.58 µm 0.8 µm


Taper Ring Gauge (5 to 50) mm

(> 50 to 100) mm (> 100 to 150) mm

0.55 µm 0.68 µm 0.84 µm


Spline Plug Gauge (Over Pins Measurement)


(0 to 50) mm (> 50 to 100) mm

(0 to 50) mm

(> 50 to 100) mm

0.4 µm 0.59 µm

0.29 µm 0.52 µm


Spline Ring Gauge (Over Pins Measurement)

(Minor Diameter

Measurement)

(15 to 50) mm (> 50 to 100) mm

(15 to 100) mm

0.54 µm 0.68 µm

0.82 µm


Profile Projector

Dial Gauge Tester, Calibration Tester

0 mm to 1 mm > 1 mm to 5 mm > 5 mm to 25 mm

0.15 µm 0.17 µm 0.37 µm

Linear Length Gauge with Display

http://anab.org/


Page 15 of 28




Equipment Gauge Block Accessories

(Flatness) (Parallelism)

(Length) (Straightness) (Eccentricity)

(0 to 10) µm (0 to 1) mm

(0 to 200) mm (0 to 100) µm (0 to 1) µm

0.1 µm 0.27 µm 0.23 µm 0.34 µm 0.82 µm

Lever Probe with Display, Universal Length

Measuring Machine, and Profile Projector

Pitch Gauge ≤ 50 mm 0.82 µm Profile Projector

Angle Gauge Block (0 to 90) degree 0.66 s CMM Gear

(External) (Over Pins Measurement)


(0 to 50) mm

(> 50 to 100) mm

Up to 50 mm (> 50 to 100) mm

0.33 µm 0.43 µm

0.29 µm 0.52 µm


Gear (Internal)

(Over Pins Measurement)

(15 to 50) mm (> 50 to 100) mm

0.55 µm 0.69 µm Ring Gauge and Universal

Gear (Minor Diameter

Measurement) (12 to 100) mm 0.82 µm Length Measuring Machine

Profile Projector

Test Bars (Diameter)

(0 to 25) mm (> 25 to 50) mm (> 50 to 75) mm (> 75 to 100) mm

0.19 µm 0.29 µm 0.38 µm 0.52 µm


Test Bars (Total Runout) (0 to 100) mm 0.16 µm Lever Probe with Display

Snap Gauge / Gap Gauge (External Measurement)

(0 to 10) mm (> 10 to 20) mm (> 20 to 30) mm (> 30 to 40) mm (> 40 to 50) mm (> 50 to 60) mm (> 60 to 70) mm (> 70 to 80) mm (> 80 to 90) mm

(> 90 to 100) mm (> 100 to 125) mm (> 125 to 150) mm



http://anab.org/


Page 16 of 28




Equipment

Snap Gauge / Gap Gauge (Internal Measurement)

(1 to 50) mm (> 50 to 100) mm (> 100 to 150) mm

0.47 µm 0.62 µm 0.8 µm


Bevel Protractor, Universal Bevel Protractor

Angle Measurement Scale Measurement

(0 to 360) degree (0 to 200) mm

0.29 minutes 0.71 µm

Angle Block Set and Profile Projector

Radius Gauge (Concave and Convex)

(0.1 mm to 50) mm (>50 mm to 80) mm (>80 mm to 100) mm

1.0 µm 1.2 µm 1.4 µm

Profile Projector

Chamfer Gauge, Chamfer Measuring Gauge (0.1 mm to 50) mm 1.0 µm Profile Projector

Steel Ruler, Metal Rule


(>800 to 1 000) mm (>1 000 to 1 200) mm (>1 200 to 1 400) mm (>1 400 to 1 600) mm (>1 600 to 1 800) mm (>1 800 to 2 000) mm

0 018 mm 0 019 mm 0 019 mm 0 02 mm 0 02 mm

0 021 mm 0 021 mm 0 022 mm 0 023 mm 0 023 mm

Scale Calibrator

Steel Tape


(>800 to 1 000) mm (>1 000 to 1 200) mm (>1 200 to 1 400) mm (>1 400 to 1 600) mm (>1 600 to 1 800) mm (>1 800 to 2 000) mm (>2 000 to 4 000) mm (>4 000 to 6 000) mm (>6 000 to 8 000) mm (>8 000 to 10 000) mm

(>10 000 to 12 000) mm (>12 000 to 14 000) mm (>14 000 to 16 000) mm (>16 000 to 18 000) mm

0.019 mm 0.019 mm 0.019 mm 0.02 mm 0.02 mm

0.021 mm 0.021 mm 0.022 mm 0.023 mm 0.024 mm 0.046 mm 0.069 mm 0.091 mm 0.12 mm 0.14 mm 0.16 mm 0.19 mm 0.21 mm

Scale Calibrator

http://anab.org/


Page 17 of 28




Equipment

Steel Tape

(>18 000 to 20 000) mm (>20 000 to 22 000) mm (>22 000 to 24 000) mm (>24 000 to 26 000) mm (>26 000 to 28 000) mm (>28 000 to 30 000) mm

0.23 mm 0.25 mm 0.28 mm 0.3 mm

0.32 mm 0.34 mm

Scale Calibrator

Textile Tape


(>800 to 1 000) mm (>1 000 to 1 200) mm (>1 200 to 1 400) mm (>1 400 to 1 600) mm (>1 600 to 1 800) mm (>1 800 to 2 000) mm (>2 000 to 4 000) mm (>4 000 to 6 000) mm (>6 000 to 8 000) mm (>8 000 to 10 000) mm

(>10 000 to 12 000) mm (>12 000 to 14 000) mm (>14 000 to 16 000) mm (>16 000 to 18 000) mm (>18 000 to 20 000) mm (>20 000 to 22 000) mm (>22 000 to 24 000) mm (>24 000 to 26 000) mm (>26 000 to 28 000) mm (>28 000 to 30 000) mm

0.019 mm 0.019 mm 0.019 mm 0.02 mm 0.02 mm

0.021 mm 0.021 mm 0.022 mm 0.023 mm 0.024 mm 0.046 mm 0.069 mm 0.091 mm 0.12 mm 0.14 mm 0.16 mm 0.19 mm 0.21 mm 0.23 mm 0.25 mm 0.28 mm 0.3 mm

0.32 mm 0.34 mm

Scale Calibrator

Taper Gauge (Scale Type) (0 to 50) mm

(>50 to 75) mm (>75 to 100) mm

1 µm 1.2 µm 1.4 µm

Profile Projector

Wet Film Thickness Gauge (0 to 6.5) mm 0.82 µm Profile Projector

1Measuring Microscope (0 to 50) mm

(>50 to 150) mm (>150 to 250) mm

0.58 µm 0.58 µm 0.58 µm

Standard Scale

http://anab.org/


Page 18 of 28




Equipment 1Profile Projector

Angle

Linearity

Magnification

Squareness

(0 to 360) degree

(0 to 50) mm

(>50 to 150) mm (>150 to 250) mm

10X

(100 x 70) mm (150 x 100) mm (250 x 165) mm

2.1 minutes

0.58 µm 0.58 µm 0.58 µm

0.25 % of reading

2.8 µm 2.8 µm 3 µm

Overlay Chart

Standard Scale

Standard Scale

Precision Square

2Inside Micro Checker (25 to 600) mm (0.13 + 7.7x10-4L) µm CMM

2Vee Block (0 to 300) mm (0.13 + 7.7x10-4L) µm CMM

2Sine Bars (0 to 300) mm (0.13 + 7.7x10-4L) µm CMM

Length Bar, Setting Rod

(0 to 500) mm (>500 to 600) mm (>600 to 700) mm (>700 to 800) mm (>800 to 900) mm (>900 to 1000) mm

1.6 µm 1.9 µm 2.2 µm 2.5 µm 2.8 µm 3.1 µm

CMM

2Carpenter's Square Perpendicularity/Straightness (900 x 500) mm (0.13 + 7.7x10-4L) µm CMM

Carpenter's Square Linear Scale

(0 to 200) mm (>200 to 400) mm (>400 to 600) mm (>600 to 700) mm (>700 to 900) mm

0.018 mm 0.019 mm 0.019 mm 0.02 mm 0.02 mm

Scale Calibrator

Combination Square Scale Measurement (0 to 300) mm 0.019 mm Scale Calibrator

Combination Square Straightness of protractor

head (0 to 300) mm 3.6 µm Dial test indicator and

Granite Surface Plate

Combination Square Angle of Centering Head

and Squaring Head (45 to 90) degree 2.2 minutes Profile Projector

http://anab.org/


Page 19 of 28




Equipment Combination Square Angle

Measurement (0 to 180) degree 0.58 minutes Angle Block Set and Precision Square

2Jig, Fixture, Mold, and Die

X Axis: 700 mm Y Axis: 1 000 mm Z Axis: 600 mm

(0.13 + 7.7x10-4L) µm CMM

2Straight Edge (0 to 1 000) mm (0.13 + 7.7x10-4L) µm CMM

2Coordinate Measuring Machine

X 500 mm Y 500 mm Z 500 mm

(0.11 + 7.7x10-4L) µm Gauge Blocks

Test Sieve (0 to 50) mm 1.1 µm Profile Projector 2Cylindrical Square

Length Diameter

(0 to 500) mm (0 to 200) mm

(0.13 + 7.7x10-4L) µm CMM

Welding Gauge Scale Measurement

Taper Gauge

(0 to 100) mm (0 to 20) mm

1.5 µm 0.85 µm

Profile Projector

Welding Gauge Depth Gauge (0 to 50) mm 0.24 mm Gauge Block Set

Welding Gauge Angle Measurement (0 to 180) degree 0.58 minutes Angle Block Set and

Precision Square

Mass and Mass Related



Equipment

1Indirect Verification of Rockwell Hardness Tester

(20 to 40) HRA (40 to 70) HRA (70 to 95) HRA

(10 to 40) HRBW (40 to 70) HRBW (70 to 100) HRBW

(10 to 30) HRC (30 to 40) HRC (40 to 70) HRC

0.4 HRA 0.4 HRA 0.4 HRA

0.4 HRBW 0.4 HRBW 0.4 HRBW

0.4 HRC 0.4 HRC 0.4 HRC

Reference Hardness Test Blocks

http://anab.org/


Page 20 of 28




Equipment 1Indirect Verification of Brinell Hardness Tester

HBW 10/3000/15

(0 to 200) HBW (200 to 400) HBW (400 to 500) HBW

2 HBW 3 HBW 4 HBW

Reference Hardness Test Blocks

1Hopper Scales/ Tank Scales

Up to 500g >500 g to 1 kg (>1 kg to 2) kg (>2 kg to 5) kg (>5 kg to 10) kg (>10 kg to 20) kg (>20 kg to 50) kg (>50 kg to 100) kg

(>100 kg to 200) kg (>200 kg to 500) kg

(>500 kg to 1 000) kg (>1 000 kg to 2 000) kg (>2 000 kg to 5 000) kg (>5 000 kg to 6 000) kg

0.71 mg 2.1 mg 3.2 mg 7.1 mg 31 mg 54 mg 0.13 g 1.5 g 3.7 g 11 g 23 g 46 g

0.2 kg 0.27 kg

Reference Standard Weights

Durometer (Spring Force Only)

Types A, B, C, D, DO, E, O, OO, OOO

(10 to 90) Duro 0.058 Duro Electronic Balance

Push-Pull Gauge

Up to 10 N (>10 N to 20) N (>20 N to 30) N (>30 N to 50) N (>50 N to 100) N (>100 N to 200) N (>200 N to 300) N (>300 N to 500) N

(>500 N to 1 000) N

0.012 N 0.024 N 0.047 N 0.058 N 0.12 N 0.24 N 0.47 N 0.58 N 1.2 N

Standard Weight

Force Gauge

Up to 5 N (>5 N to 10) N (>10 N to 50) N (>50 N to 100) N (>100 N to 500) N

(>500 N to 1 000) N

0.000 66 N 0.000 87 N 0.006 6 N 0.008 6 N 0.066 N 0.085 N

Standard Weight

http://anab.org/


Page 21 of 28




Equipment

Tension Gauge

Up to 1 N (>1 N to 3) N (>3 N to 5) N (>5 N to 10) N (>10 N to 50) N (>50 N to 200) N (>200 N to 500) N

0.012 N 0.029 N 0.058 N 0.15 N 0.29 N 1.2 N 2.9 N

Standard Weight

1Hand Torque Tool, Torque Wrench, Torque Driver, and Electronic

Torque

(>0 to 2.5) N·m (>2.5 to 17) N·m (>17 to 45) N·m

(>45 to 100) N·m (>100 to 340) N·m

(>340 to 1 500) N·m



Torque Transducer with Indicator

Torque Transducer, Torque Tester, and

Torque Meter

(0.1 to 1) N·m (>1 to 2.5) N·m (>2.5 to 5) N·m (>5 to 10) N·m

(>10 to 20) N·m (>20 to 50) N·m

(>50 to 100) N·m (>100 to 200) N·m (>200 to 340) N·m

0.06 % of reading 0.025 % of reading 0.015 % of reading 0.06 % of reading 0.03 % of reading

0.015 % of reading 0.06 % of reading 0.03 % of reading 0.02 % of reading

Calibration Arm and Weight

1Torque Calibrator, Torque Transducer, Torque Tester, and

Torque Meter

(1 to 20) N·m (>20 to 50) N·m

(>50 to 200) N·m (>200 to 500) N·m

(>500 to 1 000) N·m

0.12 % of reading 0.068 % of reading 0.031 % of reading 0.075 % of reading 0.056 % of reading

Torque Transfer Wrench with Indicator

1Electric Screwdriver and Air Torque Screwdriver

(>0 to 2.5) N·m (>2.5 to 5) N·m (>5 to 10) N·m

(>10 to 15) N·m (>15 to 20) N·m (>20 to 25) N·m



Torque Meter

Load Cell (Tension)

(0.1 to 0.5) kN (>0.5 to 2.5) kN (>2.5 to 5) kN (>5 to 10) kN

(>10 to 50) kN (>50 to 100) kN

0.11 % of reading 0.039 % of reading 0.033 % of reading 0.061 % of reading 0.016 % of reading 0.11 % of reading

Load Cell with Indicator

http://anab.org/


Page 22 of 28




Equipment

1Load Cell and Force Measurement (Compression)


(>10 to 50) kN (>50 to 100) kN

(>100 to 250) kN (>250 to 450) kN





1Universal Testing Machine (Tension)

(Compression)


(>10 to 50) kN (>50 to 250) kN

(0.1 to 0.5) kN

(>0.5 to 2.5) kN (>2.5 to 5) kN (>5 to 10) kN

(>10 to 50) kN (>50 to 250) kN

(>250 to 450) kN

0.11 % of reading 0.039 % of reading 0.033 % of reading 0.061 % of reading 0.016 % of reading 0.076 % of reading

0.14 % of reading




1Pressure Gauge, Differential Pressure Gauge,

Digital Pressure Gauge, Pressure Recorder, Pressure

Controller, Manometer Pneumatic

(0 to 14) kPa (14 to 2.069) MPa

0.002 kPa 0.069 kPa

Pressure Calibrator, Pressure Module

1Pressure Gauge, Differential Pressure Gauge,

Digital Pressure Gauge, Pressure Recorder, Pressure

Controller, Manometer Hydraulic

(2.069 to 68.947) MPa 0.009 MPa Pressure Calibrator, Pressure Module

1Pressure Transducer, Pressure Transmitter, Vacuum Transmitter

Pneumatic

(–90 to 0) kPa (0 to 14) kPa

(14 to 345) kPa (345 to 690) kPa

(690 to 2.069) MPa

0.01 kPa 0.005 kPa 0.011 kPa 0.08 kPa 0.08 kPa

Pressure Calibrator, Pressure Module

http://anab.org/


Page 23 of 28




Equipment 1Vacuum Gauge (Analog, Digital) (–90 to 0) kPa 0.009 kPa Pressure Calibrator,

Pressure Module Pressure Calibrator,

Pressure Module, Pressure Transducer, Pressure

Transmitter with Digital Reading/Electrical Output,

Digital Pressure Gauge, Bourdon Tube Pressure

Gauge Positive Gauge Pressure

20 kPa to 3.5 MPa

275 kPa to 14 MPa

(>14 to 110) MPa

1 x 10-4Pe (not less than 0.035 kPa)

9.6 x 10-5Pe (not less than 0.13 kPa)

1 x 10-4 Pe (not less than 1.1 kPa)

Dead Weight Tester

Pressure Calibrator, Pressure Module, Pressure

Transducer, Pressure Transmitter with Digital

Reading/Electrical Output, Digital Pressure Gauge, Bourdon Tube Pressure

Gauge Negative Gauge Pressure

(3.4 to 100) kPa 1.6 x 10-4Pe (not less than 0.001 6 kPa) Dead Weight Tester

Liquid flow meter with indicator

and Liquid flow meter with electrical output -Volume flow

-Volume flow rate

-Mass flow

-Mass flow rate

(>0 to 50) l (>50 l to 300) l

(>300 l to 1 900) l

(>0 to 3) m³/h (>3 to 40) m³/h

(>40 to 300) m³/h

(>0 to 50 kg (>50 to 300) kg

(>300 to 1 900) kg

(>0 to 3) t/h (>3 t/h to 40) t/h

(>40 t/h to 300) t/h

0.015 % of reading 0.017% of reading 0.017 % of reading

0.015 % of reading 0.017 % of reading 0.017% of reading



Electronic Balance, Stopwatch, and

Digital Thermometer with Sensor

http://anab.org/


Page 24 of 28




Equipment 1Air flow meter, Gas flow

meter, Variable area flow meter

(Rotameter)

(>0 to 200) sccm >200 sccm to 2 slpm

(>2 to 50) slpm (>50 to 250) slpm


Mass Flow Meter

1, 3Liquid flow meter with indicator

and Liquid flow meter with electrical output by Coriolis

Mass Flow Meter

-Volume flow

-Volume flow rate

-Mass flow

-Mass flow rate

(>0 to 30 000) l

(>0 to 200) m³/h

(>0 to 30 000) kg

(>0 to 200) t/h

0.09 % of reading

0.09 % of reading

0.09 % of reading

0.09 % of reading

Coriolis Mass Flow Meter

Liquid Flow Meter with Indicator (0 to 280) m3/h 0.12 % of reading Ultrasonic Flow Meter

Photometry and Radiometry



Equipment

1Spectrophotometer -Wavelength accuracy

Holmium Filter

279 nm 288 nm 334 nm 361 nm 419 nm 446 nm 454 nm 460 nm 536 nm 638 nm

0.39 nm 0.39 nm 0.39 nm 0.39 nm 0.39 nm 0.39 nm 0.39 nm 0.39 nm 0.39 nm 0.39 nm

Holmium Filter

http://anab.org/


Page 25 of 28

Photometry and Radiometry



Equipment


Didymium Filter

431 nm 473 nm 513 nm 529 nm 573 nm 585 nm 684 nm 741 nm 749 nm 807 nm 879 nm

0.35 nm 0.35 nm 0.35 nm 0.35 nm 0.35 nm 0.35 nm 0.35 nm 0.35 nm 0.35 nm 0.35 nm 0.35 nm

Didymium Filter

1Spectrophotometer -Wavelength accuracy -Photometric Accuracy

UV

235 nm 257 nm 313 nm 350 nm

0.002 9 Abs 0.002 9 Abs 0.002 9 Abs 0.002 9 Abs

Potassium Dichromate Filter


Visible

440 nm 456 nm

546.1 nm 590 nm 635 nm

0.003 1 Abs 0.003 1 Abs 0.003 1 Abs 0.003 1 Abs 0.003 1 Abs

Neutral Density Filter

Lux Meter

(0 to 10) lux (>10 to 30) lux (>30 to 80) lux (>80 to 500) lux

(>500 to 1 000) lux (>1 000 to 1 500) lux (>1 500 to 3 000) lux (>3 000 to 4 500) lux (>4 500 to 7 000) lux

0.20 lux 0.34 lux 0.73 lux 6.1 lux 13 lux 18 lux 60 lux 54 lux

100 lux

Hioki FT3424 Light Meter Halogen Light

Thermodynamic



Equipment

1Digital Thermometer with Surface Probe

(35 to 100) °C (>100 to 200) °C (>200 to 300) °C (>300 to 450) °C

0.47 °C 0.93 °C 1.4 °C 2 °C

Surface Calibrator and Standard Thermometer

with Sensor

http://anab.org/


Page 26 of 28

Thermodynamic



Equipment

Infrared Thermometer

(35 to 100) °C (>100 to 200) °C (>200 to 300) °C (>300 to 500) °C

0.14 °C 0.14 °C 0.31 °C 0.6 °C

Precision Infrared Calibrator and Standard

Thermometer with Sensor λ = (8 to 14) µm, Ɛ= 0.95

1Temperature & Humidity Chamber

(10 to 50) °C (10 to 95) %RH

0.37 °C 0.84 %RH Data Logger with Sensors

1Temperature Sensor (TC)

(35 to 100 °C (>100 to 400) °C (>400 to 750) °C (>750 to 900) °C

(>900 to 1 050) °C (>1 050 to 1 200) °C

0.01 °C 0.01 °C 1.2 °C 1.2 °C 1.2 °C 1.2 °C

Standard Thermometer with Sensor

Dry Blocks, Liquid Bath

1Temperature Sensor (RTD) (-38to 50) °C

(>50 to 200) °C (>200 to 400) °C

0.004 3 °C 0.004 3 °C 0.004 3 °C

Dry Block/Liquid Bath and Standard

Thermometer with Sensor

Temperature Transmitter (10 to 50) °C 0.37 °C Keithley 2700A Datalogger Chilled-Mirror Hygrometer

Temp/Hum Chamber

Humidity Transmitter (10 to 95) %RH 0.84 %RH Keithley 2700A Datalogger Chilled-Mirror Hygrometer

Temp/Hum Chamber

Thermo-Hygrometer (10 to 50) °C (10 to 95) %RH

0.37 °C 0.84%RH

Chilled-Mirror Hygrometer Temp/Hum Chamber

Thermo-Hygrograph (10 to 50) °C (10 to 95) %RH

0.69 °C 1.1%RH

Chilled-Mirror Hygrometer Temp/Hum Chamber

1Dial Thermometer (-38 to 50) °C

(>50 to 200) °C (>200 to 400) °C

0.02 °C 0.02 °C 0.02 °C



1Digital Thermometer with RTD/TC Sensors

(-38 to 0) °C (>0 to 200) °C

(>200 to 400) °C (>400 to 650) °C (>650 to 800) °C

(>800 to 1 000) °C (>1 000 to 1 200) °C

0.004 3 °C 0.004 3 °C 0.004 3 °C 0.008 2 °C

1.2 °C 1.2 °C 1.2 °C



LIG (Total & Partial Immersion)

(-38 to 50) °C (>50 to 100) °C

(>100 to 150) °C

0.004 9 °C 0.004 9 °C 0.004 9 °C

Semi-SPRT with Indicator Liquid Bath

http://anab.org/


Page 27 of 28

Thermodynamic



Equipment 1Auto Clave (110 to 130) °C 0.12 °C Data Logger with Sensors

1Liquid Bath (5 positions) (-38 ° to 50) °C (>50 to 200) °C

0.1 °C 0.1 °C Data Logger with Sensors

1Liquid Bath (9 positions) (-38 to 50) °C

(>50 to 200) °C (>200 to 400) °C

0.01 °C 0.01 °C 0.01 °C


1Temperature Chamber

(-38 to 50) °C (>50 to 100) °C (>100 to 150) °C (>150 to 200) °C

0.1 °C 0.1 °C 0.1 °C 0.1 °C

Data Logger with Sensors

1Furnace (400 to 1200) °C 1.3 °C Data Acquisition with TC

MIG Thermometer (-38 to 50) °C

(>50 to 100) °C (>100 to 150) °C

0.12 °C 0.12 °C 0.12 °C

Semi-SPRT with Indicator

1COD Reactor (25 to 100) °C (>100 to 200) °C

0.1 °C 0.1 °C Data Logger with Sensors

1Temperature Recorder with Probe (Digital Type)

(-38 to 0) °C (>0 to 200) °C

(>200 to 400) °C

0.007 2 °C 0.007 2 °C 0.007 2 °C


1Temperature Recorder with Probe (Graph Type)

(-38 to 0) °C (>0 to 200) °C

(>200 to 400) °C

0.58 °C 0.58 °C 0.58 °C


Dry Block

(-38 to 0) °C (>0 to 600) °C

(>600 to 1 000) °C (>1 000 to 1 200) °C

0.15 °C 0.15 °C 1.1 °C 1.3 °C


Semi-SPRT/TC

Time and Frequency



Equipment 1 Frequency - Measure 0.1 Hz to 3 GHz

(> 3 to 26.5) GHz 3 × 10-9 f

1.8 × 10-6 f Agilent 53132A,

HP 5348A Counters

1 Frequency - Measure 0.1 Hz to 26.5 GHz 6.1 × 10-10 f SRS FS725 Frequency

Standard, Agilent 53132A HP 5348A Counters

http://anab.org/


Page 28 of 28

Time and Frequency



Equipment

1Frequency - Source 1 kHz to 26.5 GHz 6.1 × 10-10 f

SRS FS725 Frequency Standard, Agilent 33120A,

Agilent E4421B, HP 8340A Signal Generators

1Stroboscope - RPM Speed

(6 to 999.99) RPM (1 000 to 6 000) RPM (6 001 to 15 000) RPM

(15 001 to 59 999) RPM (60 000 to 98 999) RPM (99 000 to 99 999) RPM

0.08 RPM 0.59 RPM 0.82 RPM 0.82 RPM 0.82 RPM 0.82 RPM

PROVA RM-150-1 Tachometer

1Timer - Time Up to 3 600 s 1 s Agilent 53132A Counter

N2862A Probe 1 Centrifuge

- Time (1 to 90) min 1 min Casio HS-80TW Stopwatch

1 Centrifuge - RPM Speed

Up to 999 RPM (1 000 to 9 999) RPM

(10 000 to 15 000) RPM 1 RPM PROVA RM-150-1

Tachometer

Digital Tachometer (Photo & Contact)

(1 to 99.99) RPM (100 to 999.9) RPM

(1 000 to 99 999) RPM

0.005 8 RPM 0.058 RPM 0.6 RPM

Agilent 33120A Waveform Generator and LED

Calibration and Measurement Capability (CMC) is expressed in terms of the measurement parameter, measurement range, expanded uncertainty of measurement and reference standard, method, and/or equipment. The expanded uncertainty of measurement is expressed as the standard uncertainty of the measurement multiplied by a coverage factor of 2 (k=2), corresponding to a confidence level of approximately 95%. Notes: 1. On-site calibration service is available for this parameter, since on-site conditions are typically more variable than those in the laboratory, larger measurement

uncertainties are expected on-site than what is reported on the accredited scope 2. f = measured frequency in hertz, L = Length in mm, M = mismatch, Pe = Pressure generated at the reference level 3. Available with Mobile Laboratory for Field Service 4. This scope is formatted as part of a single document including Certificate of Accreditation No. AC-2695.

http://anab.org/

certificate of accreditationthaiheartcal.com/wp-content/uploads/2019/10/anab-225490_213594… ·...

Documents