certificate - rompetrolnewweb.rompetrol.com/cms/rominserv_valves_iaifo/ad2000.pdf · ad...
TRANSCRIPT
IndustrieService
CERTIFICATE
The company
s.c. ROMINSERV S.A.Punct de lucru ROMINSERV
VALVES - IAIFO ZalauB-dul M. Viteazul Nr. 58
R0-450090 Zalau
has been audited and approved as manufacturer according to
AD 2000-Merkblatt WO I AD 2000-Merkblatt A4
The scope of the audit and other relevant data are detailed in ourreport No. 6212.
The company
has facilities permitting manufacturing and inspection in compli-ance with the current technical standards,
operates a quality system which guarantees that manufacturingand inspection of the products stated in our report are in conformitywith the technical rules and standards,
employs qualified supervisory and inspection personnel.
The certificate expires in July 2009.
MOnchen, July 15th,2007
TOVSODIndustrieServiceGmbH
TOV.CERT-ZertifizierungsstellefUrDr9'ikgerate
036
,I o
\TIIndustrie Service
Geltungsbereich der UberprOfung als Hersteller von Werkstoffen fOrOberwachungsbedOrftige AnlagenScope of the Approval -Manufacturing of Base Material used for Regulated Pressure Equipment
Herstellerl Name:
Manufacturer: StraBe/Street:
Ort/City:
Anlage zum BestatigungsschreibenAnnex to Manufacturer's Approval
NationalitaU I Datuml Blatt-Nr.l TUV.CERT.ZertifizierungsstellefUrDruckgerate
BemerkungenNotes
.
11
3.1.B-AbnahmeprOfzeugnis - Gewicht < 500 kg I3.1.B. Certfiicate - weight < 500 kg
3.1.B-AbnahmeprOfzeugnis - Gewicht < 500 kg I3.1.B. Certfiicate - weight < 500 kg
3.1.B-AbnahmeprOfzeugnis - Gewicht < 500 kg I3.1.B. Certfiicate - weight < 500 kg
3.1.B-AbnahmeprOfzeugnis- Gewicht < 500 kg I
3.1.B. Certfiicate - weight < 500 kg
A.-Nr.: 6212v.1 dated 2007-07-15
Erlauterunaen 1Notes: A =LosungsgeglOht und abgeschreckUsolution annealed and quenched L =LosungsgeglOhUsolution annealed N =NormalgeglOht I normalized 5 =SpannungsarmgeglOhUstress relieved TM =Thermomech. behandeJUthermomech. treated U =UngeglOhUnot annealed V =VergOtet Iquenched and tempered CR =Temperaturgeregell warmumgeformU temperature controlled hot formed (controlled rolled) G =WeichgeglOht lannealed a =Werkstoffbezeichnung
in Spalle 11/material designation in column 11 b =Lieferzustand in Spalle 111 delivery condition in column 11 c =PrOfgegenstand in Spalte 111 object in column 11 d =Abmessung in den Technischen Regeln I dimensions ace. to technical rulese =Gewicht in den Technischen ReQeln IweiQht ace. to technical rules f =Nr. der Technischen Reaeln in SDalte 11/No. of the technical rules in column 11
WerkstoffbezeichnunglMaterial Name
Ifd. Werkstoff-Nr.lNr. Material No.
1 2 2
01 GP240GH
02 G20Mo5
03 G17CrMo5-5
04 G20Mn5
05 EN-GJL-250
06 EN-GJS-400-15EN-GJS-500-7
07 I P250GH
S.C Rominserv S.A. Punct de lucru RominservValves IAIFO Zalau
B-dul Mihai Viteazul Nr. 58 Werk/
I Nationaliy I Date I PageNo. I
Benannte Stelle, Kennnumer I NotifiedBody,No.. 0036.RO - 450090 Zalau Plant: RO 2007-07-15 1 von/of 1 Abteilung Festigkeit und Zuverlassigkeit I
I Department Materials and Structural IntegrityI
Gewicht PrOfgrundlagenl
Werkstoff- I
Liefer- PrOfgegenstand Abmessungen Weight Anforderungen
Spezifikation zustand Erzeugnisform I Dimensions max. Technische Regeln I
Material Specification Delivery Production Form Dicke Durchmesser 1 = t TechnicalRequirementsCondition< [mm] [mm] 2 = kgThickness Diameter
Art/Spec. I Nr./No. I Begriff I Name vonl bisl vonl bisl ,!. Wert Art.! Nr.1from to from to value Spec. No.
3a T 3b T 4 T 5 6a 6b 7a 7b 8a 8b 9a 9b
EN 110213-2 IN 1GuBstOckI casting 6 32 32 600 2 1300 AD 2000 W5
EN 110213-2 IN I GuBstOckI casting 6 32 32 600 2 1300 AD 2000 W5
EN 110213-2 IN I GuBstOckI casting 6 32 32 600 2 1300 AD 2000 W5
EN 110213-3 IN I GuBstOckI casting 6 32 32 600 2 1300 AD 2000 W5AD 2000 W10
EN 11561 IU I GuBstOckI casting 6 22 15 400 2 500 AD 2000 W3/1
EN 11563 IU I GuBstOckI casting 6 22 15 400 2 500 AD 2000 W3/2
EN 110222-2 IN I SchmiedestOckI forging 2 10 AD 2000 W13
~.
.
.
.
.
1OV.~
IndustrieService
CERTIFICATEThe Certification Body. 0036 . ofTOVSOD Industrie Service GmbH
certifies that
S.C. ROMINSERVS.A.Punct de lucru ROMINSERV
VALVES. IAIFOZalauB.dul M.Viteazul Nr. 58
R0-450090 Zalau
has implemented, operates and maintains a
QualityAssurance System in accordance with thePressure Equipment Directive97/23/EC(PED)
Annex I, Paragraph 4.3
as Material Manufacturer for the scope of
valve housings in ferrite cast steel and grey and spheroid cast iron and forgingsin P250GH.
The scope of the approval is described in the annex to this certificate.
The manufacturer is, therefore, authorized to issue certificates of specific productcontrol within the scope of the assessed quality system and in accordance with
the Pressure Equipment Directive 97/23/EC and applied technical specifications.Possible additional requirements - specific to applied technical specifications to
meet PED Annex I - are not affected.
This certificate is valid through July 2009.
The validity of this certificate is connected to a valid certification in accordance withISO 9001 :2000.
Certificate No.: 29/2002/MUC
Munich, July 15th,2007
(Dr. R. Hackl)
:rJfied Body,No.0036., Ice GmbH,Abteilung Werkstoff- und Schweif1technik
estendstrasse 199,80686Munchen
0..T1::JV
WIndustrieService
Geltungsbereich der OberprOfung als Hersteller von Produkten nach DGR97/23/EG, Anhang I, Abschnitt 4.31Scope of Approval - Manufacturer of Base Materials used in accordance to PED, Annex I, Paragraph 4.3
Anlage zum Zertifiat Nr. / Annex to Certificate No.29/2002/MUCvan/dated 15.07.2007)
Hersteller I Name:ManufacturerlStr.lStreet:
Ort/City:
S.C. ROMINSERVSA Punctde lucru ROMINSERVVALVES-IAIFOZalauB-dulM. ViteazulNr. 58 Herst.-Nr.:
R0-450090 Zalau Manuf.-No.:
Nationaliti:iU
CountryRO
Datum:
Date:
15.07.2007
Blatt-Nr.
Page No.1 vlof 1
TOV-CERT-Zertifizierungsstelle fur DruckgerateBenannteStelle,KennnummerI NotifiedBody,No.0036
Geschaftsfeld Anlagentechnik
Bemerkungen
Remarks.
Bei der Verwendung der Werkstoffe nach Spalte 2 bis 4 sind dieFestlegungen und Grenzen des jeweiligen Regelwerks bzw. derDruckgeraterichtlinie zu beachten.FOrdie spezifischen Einsatzbedingungen der Werkstoffe ist dieZustimmung des Druckgerateherstellers bzw. der zustandigenbenannten Stelle erforderlich.1For the use of the materials ace. to column limits of the respectivestandards have 2 till4 the regulations and limits of the respectivestandards have to be observed.The specific material operating conditions have to be approvedby pressure equipment manufacturer or respectively by the notifiedbody in charge.
EXDlanation:A=L6sungsgegluhlundabgeschreckt/ solutionannealedandQuenchedL=LOsungsgegluht/solutionannealedN=Normalgegluht/normalized5=Spannungsarmgegluht/stressrelievedTM=Thermomech.behandelt/thermo-mech.treatedU=ungegluht/notannealedV=ver-gUlet/QuenchedandtemperedCR=Temperaturgeregellwarmumgeformt/temperaturecontrolledhotformed(controlledrolled)G= weichgegluht/annealeda =WerkstoffbezeichnunginSpalte11/materialdesignationincolumn11 b=LieferzustandinSpalte111deliveryconditionincolumn11 c =Prfifgegenstand in Spalte 1110bject in column 11 d = Abmessungen in den Techn. Regeln/dimensions aoc. to technical rules e = Gewichl in den Techn. Regeln / weight aoc. to technical rules f = Nr. der Techn. Regeln in Spalte 111technical rules reference column 11
*) DieGiiltigkeitdesZertifikatesist aneinegiiltigeZertifizierunggemaBISO9001:2000gebundenI Thevalidityof thiscertificateis connectedto avalidcertificationinaccordancewith ISO9001:2000.
WerkstoffI Priifgegenstandl Abmessungen GewichtWerkstoffbezeichnungl
I
MaterialErzeugnisform/Begriff Dimensions Weight
Ifd. I Werkstoff-Nr.1Nr.l Kurz Description DickefThickness max.
zeichenl Durchmesser/diameterNo. I MaterialDesignationI I Art. Nr. Code Product von bis von bis ,t. value
SDec. No. TerminoloQV from to from to value1 T2 2 T 3a 3b 4 5 6a 6b 7a 7b 8a 8b
01 IGP240GH IEN 10213-2 N GussstOck I casting 6 32 32 600 2 1300
02 I G20Mo5 I EN 110213-2 IN I GussstOckI casting 6 32 32 600 2 1300
03 I G17CrMo5-5 I EN 110213-2 IN I GussstOck I casting 6 32 32 600 2 1300
04 I G20Mn5 I EN 110213-3 IN I GussstOck I casting 6 32 32 600 2 1300
05 I EN-GJL-250 IEN 11561 IU I GussstOck I casting 6 22 15 400 2 500
06 I EN-GJS-400-15 IEN 11563 IU 1GussstOck I casting 6 22 15 400 2 500EN-GJS-500-7
07 I P250GH IEN 110222-2 IN I SchmiedestOckI forging 1 I I 1 12 110