cern project · agenda (1) work environment: (1) te-epc group (2) power converters (3) open days at...
TRANSCRIPT
CERN PROJECT:Simulation of a particle accelerator
A presentation by Lennart Beyer, Julius Seidel
AGENDA(1) Work environment:
(1) TE-EPC group
(2) Power converters
(3) Open days at CERN
(2) Project:
(1) Simulation of a particle accelerator
(2) Equipment
(3) Programming Code
(4) Presentation
(3) Visits:
(1) Static VAR compensator
(2) Cern Control Centre
(3) AMS Centre
TE-EPC GROUP
TE - Technology Department
EPC - electrical power converters
Design Operation
Equipment
Responsibility Tests
POWER CONVERTERS
electro-mechanical device for converting
electrical energy
=> high accuracy / controlling of magnets
14.-15. SEPTEMBER 2019
SIMULATION OF PARTICLE
ACCELERATOR
EQUIPMENT
ESP-32 wroom
LED WS2812b
ARDUINO platform
PROGRAMMING
CODE
VISITSSVC, CCC & AMS Centre
SVC - STATIC VAR
COMPENSATOR
Used for the stability of
the power grid, when the
SPS is active
Eliminates disturbances
caused by changes in
reactive power and
voltage fluctuations
CCC - CERN CONTROL
CENTRE
monitors and controls the particle accelerators: PS/Booster, SPS, LHC &
technical infrastructure
AMS CENTRE- ALPHA
MAGNETIC SPECTROMETER
Particle detector for precision
measurements of cosmic rays,
dark matter & anti matter
REFERENCES
http://epc.web.cern.ch/content/group
http://epc.web.cern.ch/sites/epc.web.cern.ch/files/pictures/TE-
EPC-Presentation-2014%20.pdf
https://opendays.cern/
https://www.symmetrymagazine.org/article/march-2015/inside-
the-cern-control-centre
https://home.cern/science/experiments/ams
http://epc.web.cern.ch/content/what-power-converter
THANK YOU FOR YOUR ATTENTION
AND CONCERN!