ceramic product inspection sample report

7/30/2019 Ceramic Product Inspection Sample Report

1/14

TEL:+86-(0)591-28050797 Fax: +86-(0)591-83841281Email: [email protected] www.veriquality.net

Report No.:xxxxxxxx

This reflects our findings at the time and place in inspection. This inspection has been carried out to the best of our knowledge and ability and our responsibility is limited to

the exercise of reasonable one. This report does not relieve the sellers from their contractual obligations nor prejudice buy ers right for compensation for any apparent and/or

hidden defects not detected during our random inspection or occurring thereafter. This report does not evidence shipment.

Page 1 of 14

INSPECTION REPORT (PSI)

1. INSPECTION INFORMATION

Client: XXXXXXXX

Supplier: XXXXXXXX Factory: XXXXXXXX

P.O. No.: XXXXXXXX P.O. Quantity: XXXXXXXX

Product: Ceramic firepots Item No.: XXXXXXXX

Inspection Date: XXXXXXXX Location: XXXXXXXX

Inspector: XXXXXXXX Reviewed by: XXXXXXXX

2. REFERENCE PHOTO

Warehouse Product

3. INSPECTION STANDARD

Inspection Type: Final Randomly Inspection

Default Level: ISO2859 Standard, Single Sampling Plans, Level II (Normal) Fixed samples AQL,Critical = Not allowed, Major = 2.5 , Minor = 4.0

Defect Specify: Appointed by Client Veriquality Specification as description as below:

Critical Defect:A "Critical" defect is on one's judgment and experience indicates is likely to: (1) Result in hazardous or unsafe

use, operation, or maintenance of the product, or (2) Prevents the functioning of the product.Major Defect:A "Major" defect is one other than critical, which is likely to result in the failure or to reduce materially the usabilityof the unit of product for its intended purpose.

Minor Defect: A "Minor" defect is one that is not likely to reduce materially the usability of the unit of product for its intendedpurpose or is a departure from established standards having little bearing on the effective use or operation of the unit of p roduct.

4. INSPECTION RESULT

Category Result Comment

Quantity Conform Not Conform Pending Remark Point 1

Appearance / Functionality Conform Not Conform Pending Remark Point 5,6

Product Style and Color Conform Not Conform Pending Remark Point 2,3

Data measurement Conform Not Conform Pending Remark Point


2/14


3/14


Report No.:xxxxxxxx




Page 3 of 14

4For item 0610, the polyfoam of bottom support inside the gift box was found bigger than the bottom a bit more .The factory claimed that they will improve the mold .


4/14


5/14


Report No.:xxxxxxxx




Page 5 of 14

6. QUANTITY STATUS

Item No.ShipmentQuantity

Quantity Available Sampling Size From

Packed

Quantity

Not Packed

Quantity

Not Finished

Quantity

Packed

Quantity

Not Packed

QuantityPcs Ctn Pcs Ctn Pcs Pcs Pcs Ctn Pcs

06102300 700 - - 700 - 22 -

06101700 700 - - - 700 - 22 -

06202100 1700 - - - 1700 - 53 -

06203600 1700 - - - 1700 - 53 -

06203800 600 - - - 600 - 19 -

06203700 500 - - - 500 - 15 -

06501300 550 - - 550 - 16 -

Total 6450 6450 - 200INDIVIDUAL RESULT: Conform Not Conform Pending Refer to remark point 1

7. APPEARANCE / FUNCTIONALITY

Defects

Critical Major Minor

Sampling Plan: Single, Normal AQL Level: Not allowed 2.5 4.0

Inspection Level: Level II Defects Found: 0 23 13

Sample Size: 200 Max. Allowed: 0 10 14No. of Sampled Ctns: Result: Within Exceed

Defects Picture Defects Description Cr Ma Mi

Item: 06202100

Pin hole at surface- - 4


6/14


Report No.:xxxxxxxx




Page 6 of 14

Extra material stuck at bottom- - 1

Chipped mark at bottom- 1 -

Item:06403700

Big ceramic stuck at mouth edge- 1 -

Protruded point at surface- - 1


7/14


Report No.:xxxxxxxx




Page 7 of 14

Mold line obviously for small- - 2

Item 06102300

glaze crawling- 1 -

Chipped mark- 3 -

Slightly deformed at corner- - 1

Item 06101700


8/14


Report No.:xxxxxxxx




Page 8 of 14

Red color at beige surface- - 1


Deformed body- 4 -

The lid and body with big variation in effect- 1 -

Item 06203800


9/14


Report No.:xxxxxxxx




Page 9 of 14


Item 06501300

Too thick of painting- 7 -

Chipped mark at top edge- -1 -

Crack glazing- 2 -


10/14


Report No.:xxxxxxxx




Page 10 of 14

Crawling glazing- 2 -

Item 06203600


Crack glazing

Total defects found: 0 23 13

Max. Allowed: 0 10 14

INDIVIDUAL RESULT: Conform Not Conform Pending Refer to remark point 5&6


11/14


Report No.:xxxxxxxx




Page 11 of 14

8. PRODUCT STYLE & COLOR

8.1 Check against P.O / Order Information:

Discrepancy was found. Please refer to Remark point

The inspected sample was complied with P.O /order information.

No P.O / Order were provided for comparison.

8.2 Check against Specification / Picture / Sample etc.

Discrepancy was found. Please refer to Remark point

The inspected sample was consisted with approval requirement.

No Specification / Picture / Sample were provided for comparison.

8.3 Check against Instruction Manual

Discrepancy was found. Please refer to Remark point 2

The inspection sample was adopted on instruction manual

Instruction manual was not included.

INDIVIDUAL RESULT: Conform Not Conform Pending, refer to remark 2 and 3.

9. DATA MEASUREMENT

- Burn test30minutes ( 4 Samples ) : Conform

- Stability check on flat surface ( 200 Samples ) : Conform

- Barcode Readability Check ( 3 Samples/

item

) : Conform

- Transportation Drop Test ( 4 Carton ) : Conform

- Dimension of gift box (L x W x H cm) ( 1 Carton ) : Per actual findingsCarton dimension ( 1 Carton ) : Per actual findings

Carton weight ( 1 Carton ) : Per actual findings

INDIVIDUAL RESULT: Conform Not Conform Pending

Style No.Color box dimension

Specification Actual

620 6.75x6.75x6.5

610 6.75x6.75x8

640 10.5x10.25x21.75

650 8.5x9x14.75

Style No.Carton Dimension Catron weight

Specification Actual Specification Actual

620 36x19x36cm 3.2kgs

610 35.5x19x44cm 4.88kgs

640 53x29x57cm 7.54kgs

650 44x25x45cm 5.34kgs


12/14


Report No.:xxxxxxxx




Page 12 of 14

10. PACKING METHOD

Style No. Unit protected by Master carton

Polybag Polyfoam Cardboard Number of units Staples Nylon straps

All items Yes No Yes No Yes No 4/2 Yes No Yes No

Yes No Yes No Yes No Yes No Yes No



Reference photo

Master carton Color box Unit packing Units

xxxxxxx xxxxxxxx xxxxxxxx

INDIVIDUAL RESULT: Conform Not Conform Pending ,refer to remark 4.

11. SHIPPING MARK

Main mark ( 2 Sides) Side mark ( 2 Sides)

xxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxx

- For other items please refer to photos.

INDIVIDUAL RESULT: Conform Not Conform Pending


13/14


Report No.:xxxxxxxx




Page 13 of 14

PHOTO ATTACHMENT

1 warehouse and production line

1 the finished glazing product 1 2 the finised glazing product 2

3 the finished glazing product 3 4 the finished glazing product 4

5 the finished glazing 6 6 the product finished heating


14/14


Report No.:xxxxxxxx




Page 14 of 14

19 the gift box 2

2 defect and remark

40 color variation 20 06202100 defect- pin hole at surface (mi.) 1

22 06202100 defect--extra material stuck at bottom

edge (mi.) 1

23 06202100 defect--pin hole at surface (mi.) 2

ceramic product inspection sample report

Documents