CentrifugalChiller High EfficiencyGFG-S/SIT Series

GXG-S/SIT SeriesGSG-S/SIT Series

G700DLV

Printed in Japan (H) MR-E070P Mar. 2017

http://www.jci-hitachi.com

High-efficiency CompressorIncreased compressor efficiency

3 dimensional blade impeller (2 stages)

Optimally designed diffuser with vane

Low rotating speed compressor enables the use of low-loss bearing structure.

Semi-hermetic design

Hitachi High Efficiency Centrifugal Chillers realize world top-level high efficiency and downsizing thanks to the advanced technologies to optimize the design of compressors and heat-exchangers. Several series of product lineup and flexible model selection satisfy huge variety of customers’ demand such as energy saving, space saving, etc. In addition, Hitachi’s unique technologies accumulated through over 80-year history ensure long term stable operation.

Centrifugal Chiller

Advantages

Our Key Technologies Realizing High-Efficiency.

Excellent Energy-Saving EffectFirst class efficiency greatly contributes energy saving of users.

Compact DesignSignificantly compact and light weight design enables space saving and easy replacement.

High ReliabilityHitachi’s unique technologies enhance high reliability and long term stable operation.

Global Warming PreventionEnergy saving by high-efficiency centrifugal chillers

Global warming refers to the phenomenon of global rising in average atmospheric temperatures due to increased volume of CO2 and methane as a result of burning fossil fuels such as petroleum and coal. The 1995 IPCC* Report predicted that if the emission of CO2, etc. continued as it was, the atmospheric temperature would rise by as much as 2˚C by the end of the 21st century and, as a result, the sea level would rise by approximately 50 cm from the present level. In such circumstances, it is even more important to save the energy consumed by air conditioners in order to cut CO2 emission. * IPCC: Intergovernmental Panel on Climate Change

High-efficiency Refrigerant CycleIncreased refrigerating cycle efficiency

2 stages compression cycle with economizer

High-performance Heat ExchangerIncreased efficiency resulted from improved

performance of heat exchanger

Employment of high-performance heat exchange tubes.

Optimal structural design of heat exchanger to match

the behavior of refrigerant.

Featuring Ozone-safe

HFC134a

Max. COP7.0

Achieved

High Efficiency Centrifugal Chiller ■ HC-F-GFG-SSC Series (Super High Efficiency Type) ■ HC-F-GXG-S Series (High Efficiency Type) ■ HC-F-GSG-S Series (Compact Type) 1,055~7,032kW (300~2,000USRT)

High Efficiency Inverter Controlled Centrifugal Chiller ■ HC-F-GFG-SITSC Series (Super High Efficiency Type) ■ HC-F-GXG-SIT Series (High Efficiency Type) ■ HC-F-GSG-SIT Series (Compact Type) 1,055~4,922kW (300~1,400USRT)

*Capacity can be extended up to max. 2,500USRT with single compressor.

1 2

High-efficiency CompressorIncreased compressor efficiency

3 dimensional blade impeller (2 stages)

Optimally designed diffuser with vane

Low rotating speed compressor enables the use of low-loss bearing structure.

Semi-hermetic design

Hitachi High Efficiency Centrifugal Chillers realize world top-level high efficiency and downsizing thanks to the advanced technologies to optimize the design of compressors and heat-exchangers. Several series of product lineup and flexible model selection satisfy huge variety of customers’ demand such as energy saving, space saving, etc. In addition, Hitachi’s unique technologies accumulated through over 80-year history ensure long term stable operation.

Centrifugal Chiller

Advantages

Our Key Technologies Realizing High-Efficiency.

Excellent Energy-Saving EffectFirst class efficiency greatly contributes energy saving of users.

Compact DesignSignificantly compact and light weight design enables space saving and easy replacement.

High ReliabilityHitachi’s unique technologies enhance high reliability and long term stable operation.

Global Warming PreventionEnergy saving by high-efficiency centrifugal chillers

Global warming refers to the phenomenon of global rising in average atmospheric temperatures due to increased volume of CO2 and methane as a result of burning fossil fuels such as petroleum and coal. The 1995 IPCC* Report predicted that if the emission of CO2, etc. continued as it was, the atmospheric temperature would rise by as much as 2˚C by the end of the 21st century and, as a result, the sea level would rise by approximately 50 cm from the present level. In such circumstances, it is even more important to save the energy consumed by air conditioners in order to cut CO2 emission. * IPCC: Intergovernmental Panel on Climate Change

High-efficiency Refrigerant CycleIncreased refrigerating cycle efficiency

2 stages compression cycle with economizer

High-performance Heat ExchangerIncreased efficiency resulted from improved

performance of heat exchanger

Employment of high-performance heat exchange tubes.

Optimal structural design of heat exchanger to match

the behavior of refrigerant.

Featuring Ozone-safe

HFC134a

Max. COP7.0

Achieved

High Efficiency Centrifugal Chiller ■ HC-F-GFG-SSC Series (Super High Efficiency Type) ■ HC-F-GXG-S Series (High Efficiency Type) ■ HC-F-GSG-S Series (Compact Type) 1,055~7,032kW (300~2,000USRT)

High Efficiency Inverter Controlled Centrifugal Chiller ■ HC-F-GFG-SITSC Series (Super High Efficiency Type) ■ HC-F-GXG-SIT Series (High Efficiency Type) ■ HC-F-GSG-SIT Series (Compact Type) 1,055~4,922kW (300~1,400USRT)

*Capacity can be extended up to max. 2,500USRT with single compressor.

1 2

3 4

Advantages

● Lubrication Oil Supplying System

Lubricating oil

Oil strainer

Oil cooler (Cooled by the refrigerant)

Oil heater

Oil pump Bearing

Refrigerant liquid from the condenser

Refrigerant gas to the evaporator

Oil tank

for the prevention of dissolving refrigerant into the oil when the machine stops.

Cool

ing

capa

city

(%)

Alarm

30 32 34

50

100

OperatingRangeIncrease

Rated point

Cooling water inlet temperature (ºC)

Before stopping due to “High Pressure Cut”, an alarm signals to activate the pressure limit control prevention control function to continue operation.

Top-class Compact Design and Light Weight Design The compact design greatly improves flexibility in installation. Realizing space saving of machine room. Easy carry-in to machine room. Suitable for replacement of long-operating chillers. Significant reduction of refrigerant volume.

New Type EconomizerImprovement of vapor-liquid separation performance and significant downsizing are realized by the use of Newly-developed economizer. (cyclonic system)

Easy Operation with Touch Panel Type Control Panel 10.4 inch color touch panel screen Monitor various operating data Indicate trend graph during operation Trend data for max. 40 hours. (Updated every 1 hour) Indicate and store operation history for the past 12 hours (Updated every hour) Indicate and store failure and alarm history (latest 6 times each) Show Handling Guide in case of failure Automatic restart function after instantaneous power failure (Option) Multilingual Languages Indication (Japanese, English, Chinese [Simplified, Traditional], Portuguese) Download 3-month operation date to USB memory

Conventional Model GXG-S Series

GXG-S Series

Conventional Model

GXG-S Series

Conventional Model

GXG-S Series

Conventional Model

2-stage Compression CycleTo improve compressor efficiency, refrigerant economizer is added with 2-stage compressor equipped with 2 impellers, as shown in the drawing below. In this case, the refrigerant goes through two expansion devices. When the refrigerant goes through the first device, some of the refrigerant flashes, or become a gas. The flashed refrigerant is introduced to the compressor between the two stages. In the one-stage compressor cycle without the econo-mizer, all refrigerant flows in the cycle. Comparatively, in the 2-stage compressor cycle the part of the refrigerant is bypassed from the economizer to the 2-stage impeller.

● 2-stage Centrifugal Chiller Cycle

● Comparison of Chiller Size (Comparison of 1000RT models)

Installation Space Operating Weight Refrigerant Volume

Two-phase refrigerant

Refrigerant gas

Refrigerant liquid

500031504550

2400

100%69%

100% 100%

58% 53%

Approx.31%Reduction

Approx.42%Reduction Approx.47%

Reduction

Approx.31%Reduction

Approx.42%Reduction Approx.47%

Reduction

Com

pres

sor

com

pres

sion

rat

io

● Compressor characteristic comparison

Flowrate (cooling capacity)

ARI temp. condition chillerHitachi

JIS cooling water temp. standard

ARI cooling water temperature standard

* Surging phenomenon tends to occur for ARI temperature condition chillers

Load100%75%50%25%0%

JIS32˚C

30.75˚C29.5˚C28.25˚C

27˚C

ARI29.4˚C23.9˚C18.3˚C18.3˚C18.3˚C

Surging margin

* This figure shows general characteristics and does not provide any guarantees as to the performance.

Surging

Operation screen Trend data screen

Failure screen Handling guide screen

Compatible with BMSChiller control panel is equipped with RS485 communication port and compatible with Building Management System through MODBUS RTU protocol.

Quick automatic restart after power failure.Chiller automatically starts up after instantaneous power failure (less than 10 sec.) and reverts to normal operation in shortest period.

● Min. cooling water temperature 12˚C (GFG/GXG), and 15˚C (GSG)● Thermal insulation ● Spring isolator● Max. working pressure up to 2.5Mpa● Ball type automatic tube cleaning system for chilled & cooling water● Chilled & cooling water variable flow control● Marine type water box / Hinged type water box● Min. cooling capacity 10% (with hot gas bypass)● Large temperature difference (to reduce the water flow rate)● Delivery in knockdown form (4 pieces-compressor, heat exchangers, economizer, control panel, 5 pieces-evaporator & condenser is also separated.)● Soft starter (for low voltage)

High Reliability Lubrication SystemDirect refrigerant cooling of lubrication oil in oil cooler without cooling water piping increases reliability.

Surge ProtectionAdopting strict criteria specified in JIS for stable operation under high cooling water temperature. 3D 2-stage impeller enables stable operation even at low cooling load or high cooling water inlet temp. which prevents occurrence of surge.

Wider Operating RangeStable operation continues even when rise of condenser pressure due to cooling water temperature in hot summer and/ or proceeding of tube fouling.

Other Unique Feature to Enhance Reliability● Key-free impeller coupling system● Accurate chilled water temperature control within ±0.2˚C● Low noise and longer bearing life due to lower rotation speed of 2-stage compression cycle.

● Continuous oil recovery with automatic refrigerant cleaner● Prevention of oil degradation by removing residual water with filter dryer

Operational Item & Function

● Example of rising cooling water temperature due to rising ambient temperature

CompressorPower source

Condenser

Coolingwater

Orifice

Low press.low temp.suction gas

High press.high temp.discharge gas

Evaporator

Chilled water

EconomizerEconomizer

3 4

Advantages

● Lubrication Oil Supplying System

Lubricating oil

Oil strainer

Oil cooler (Cooled by the refrigerant)

Oil heater

Oil pump Bearing

Refrigerant liquid from the condenser

Refrigerant gas to the evaporator

Oil tank

for the prevention of dissolving refrigerant into the oil when the machine stops.

Cool

ing

capa

city

(%)

Alarm

30 32 34

50

100

OperatingRangeIncrease

Rated point

Cooling water inlet temperature (ºC)

Before stopping due to “High Pressure Cut”, an alarm signals to activate the pressure limit control prevention control function to continue operation.

Top-class Compact Design and Light Weight Design The compact design greatly improves flexibility in installation. Realizing space saving of machine room. Easy carry-in to machine room. Suitable for replacement of long-operating chillers. Significant reduction of refrigerant volume.

New Type EconomizerImprovement of vapor-liquid separation performance and significant downsizing are realized by the use of Newly-developed economizer. (cyclonic system)

Easy Operation with Touch Panel Type Control Panel 10.4 inch color touch panel screen Monitor various operating data Indicate trend graph during operation Trend data for max. 40 hours. (Updated every 1 hour) Indicate and store operation history for the past 12 hours (Updated every hour) Indicate and store failure and alarm history (latest 6 times each) Show Handling Guide in case of failure Automatic restart function after instantaneous power failure (Option) Multilingual Languages Indication (Japanese, English, Chinese [Simplified, Traditional], Portuguese) Download 3-month operation date to USB memory

Conventional Model GXG-S Series

GXG-S Series

Conventional Model

GXG-S Series

Conventional Model

GXG-S Series

Conventional Model

2-stage Compression CycleTo improve compressor efficiency, refrigerant economizer is added with 2-stage compressor equipped with 2 impellers, as shown in the drawing below. In this case, the refrigerant goes through two expansion devices. When the refrigerant goes through the first device, some of the refrigerant flashes, or become a gas. The flashed refrigerant is introduced to the compressor between the two stages. In the one-stage compressor cycle without the econo-mizer, all refrigerant flows in the cycle. Comparatively, in the 2-stage compressor cycle the part of the refrigerant is bypassed from the economizer to the 2-stage impeller.

● 2-stage Centrifugal Chiller Cycle

● Comparison of Chiller Size (Comparison of 1000RT models)

Installation Space Operating Weight Refrigerant Volume

Two-phase refrigerant

Refrigerant gas

Refrigerant liquid

500031504550

2400

100%69%

100% 100%

58% 53%

Approx.31%Reduction

Approx.42%Reduction Approx.47%

Reduction

Approx.31%Reduction

Approx.42%Reduction Approx.47%

Reduction

Com

pres

sor

com

pres

sion

rat

io

● Compressor characteristic comparison

Flowrate (cooling capacity)

ARI temp. condition chillerHitachi

JIS cooling water temp. standard

ARI cooling water temperature standard

* Surging phenomenon tends to occur for ARI temperature condition chillers

Load100%75%50%25%0%

JIS32˚C

30.75˚C29.5˚C28.25˚C

27˚C

ARI29.4˚C23.9˚C18.3˚C18.3˚C18.3˚C

Surging margin

* This figure shows general characteristics and does not provide any guarantees as to the performance.

Surging

Operation screen Trend data screen

Failure screen Handling guide screen

Compatible with BMSChiller control panel is equipped with RS485 communication port and compatible with Building Management System through MODBUS RTU protocol.

Quick automatic restart after power failure.Chiller automatically starts up after instantaneous power failure (less than 10 sec.) and reverts to normal operation in shortest period.

● Min. cooling water temperature 12˚C (GFG/GXG), and 15˚C (GSG)● Thermal insulation ● Spring isolator● Max. working pressure up to 2.5Mpa● Ball type automatic tube cleaning system for chilled & cooling water● Chilled & cooling water variable flow control● Marine type water box / Hinged type water box● Min. cooling capacity 10% (with hot gas bypass)● Large temperature difference (to reduce the water flow rate)● Delivery in knockdown form (4 pieces-compressor, heat exchangers, economizer, control panel, 5 pieces-evaporator & condenser is also separated.)● Soft starter (for low voltage)

High Reliability Lubrication SystemDirect refrigerant cooling of lubrication oil in oil cooler without cooling water piping increases reliability.

Surge ProtectionAdopting strict criteria specified in JIS for stable operation under high cooling water temperature. 3D 2-stage impeller enables stable operation even at low cooling load or high cooling water inlet temp. which prevents occurrence of surge.

Wider Operating RangeStable operation continues even when rise of condenser pressure due to cooling water temperature in hot summer and/ or proceeding of tube fouling.

Other Unique Feature to Enhance Reliability● Key-free impeller coupling system● Accurate chilled water temperature control within ±0.2˚C● Low noise and longer bearing life due to lower rotation speed of 2-stage compression cycle.● Continuous oil recovery with automatic refrigerant cleaner● Prevention of oil degradation by removing residual water with filter dryer

Operational Item & Function

● Example of rising cooling water temperature due to rising ambient temperature

CompressorPower source

Condenser

Coolingwater

Orifice

Low press.low temp.suction gas

High press.high temp.discharge gas

Evaporator

Chilled water

EconomizerEconomizer

COP during winter season is improved to maximum 330%.GFG-SIT/GXG-SIT/GSG-SIT Series can be operated stably even in the very low cooling water temperature. In accordance with the cooling water temperature by seasons, the chillers can maintain highly efficient operation with variable speed control of compressor. Therefore, the chillers are recommended for the customers who need the cooling operation throughout the year.

● COP Characteristics throughout the year

Excellent COP at Partial LoadVarious technologies such as newly developed high efficiency econo-mizer (cyclonic system), etc. enabled drastic improvement of the efficiency at partial load with low cooling water temperature.Improvement of the oil supply temperature control and the automatic oil recovery enables extension of the motor speed control range at low cooling water inlet temperature.

Max. Partial Load

COP 22.4IPLV 11.5

Excellent Efficiency throughout the Year

High Efficiency2-stage Compressor

Cool

ing

Wat

er In

let

Tem

p. (˚

C)

Cooling Capacity (%)

35

30

25

20

15

1020 40 60 80 100

Motor SpeedControl+ Vane Control

Motor SpeedControl

Extension ofControl Range

Efficiency is improved by minimizing usage of vane control

25

20

15

10

5

01 2 3 4 5 6 7 8 9 10 11 12

10

20

30

COP

Month

Cool

ing

Wat

er In

let

Tem

p. (˚

C)

Cooling Water Temp.

Inverter Control System

Constant Speed SystemCOP approx.330%

High EfficiencyHeat Exchangers

“Energy Saving Mode” Operation (Peak Cut Operation) (option)

Once the target motor power consumption is set, the chiller is automati-cally controlled by the motor speed, the inlet guide vane opening and the chilled water outlet tempera-ture rise. This control is extremely useful for the energy saving especially in the off-peak season when the motor speed is easily decreased.

“Eco Mode” Operation (Chilled Water Inlet Temp. Control)The chiller is usually controlled so the chilled water outlet temperature to be constant. This "Eco Mode" operation introduces the inlet temperature control, where the chilled water inlet temperature is controlled to be constant. The outlet temperature rises a bit but this is enough for the off-peak season air conditioning.

Cooling Water Variable Flow Operation (option)

When the cooling water variable flow control is applied, the cooling water flow rate is automatically calculated so the total power consumption of the compressor motor and the cooling water pump motor becomes minimum.

Hermonic Filter (option)

Harmonic filter is available to comply the requirement of IEEE 519.

● Comparison of Characteristics between CHW Outlet/Inlet Temp. Control

● Energy Saving Mode Setting Screen

● Characteristics of Cooling Water Variable Flow Operation

20 40 60 80 100

25

20

15

10

5

0

COP

Cooling Capacity (%)

CW InletTemp.

16˚C

20˚C

24˚C

28˚C

COP is improved drastically when cooling load decreases.

COP : approx. 40% Increase

CHW Inlet Temp. ControlCHW Outlet Temp. Control

Energy & Power Saving Operation Functions

Low

Low

Cooling Water flow High

High Minimum Power Consumption

Total Power Consumption(Centrifugal chiller + Cooling Water Pump)

Power Consumption of Centrifugal Chiller

Power Consumption of Cooling Water Pump

PowerConsumption

*GFG-SITSC model

Improvement of the Oil Supply Temperature ControlWhen the compressor rotation speed is low, the friction heat generated at bearings decreases. Therefore, refrigerant flow to oil cooler is controlled to keep the oil temperature property.

Lubricating oil

Oil strainerOil cooler (Cooled by the refrigerant)

Oil heater

Oil pump

Bearing

Refrigerant liquid from the condenser

Electric Valve to Control Oil Temp.

Refrigerant gas to the evaporator

Oil tank

M

25

20

15

10

5

020 40 60 80 100

COP

Cooling Capacity (%)

12˚C

CW InletTemp.

16˚C

20˚C24˚C28˚C

Max. Partial Load

COP 22.4COP is improved by theReduction of Motor Speed

1

Hitachi High Efficiency Inverter Controlled Centrifugal Chiller

Advantages

Hitachi High Efficiency Inverter-controlled Centrifugal Chillers realize energy-saving operation through out the year utilizing variable motor speed control with inverter unit, drastically improving partial load efficiency under low cooling water temperature

condition in off-peak seasons. In addition, the chillers have many unique energy saving functions which satisfy the demand to minimize the energy consump-tion.

5 6

COP during winter season is improved to maximum 330%.GFG-SIT/GXG-SIT/GSG-SIT Series can be operated stably even in the very low cooling water temperature. In accordance with the cooling water temperature by seasons, the chillers can maintain highly efficient operation with variable speed control of compressor. Therefore, the chillers are recommended for the customers who need the cooling operation throughout the year.

● COP Characteristics throughout the year

Excellent COP at Partial LoadVarious technologies such as newly developed high efficiency econo-mizer (cyclonic system), etc. enabled drastic improvement of the efficiency at partial load with low cooling water temperature.Improvement of the oil supply temperature control and the automatic oil recovery enables extension of the motor speed control range at low cooling water inlet temperature.

Max. Partial Load

COP 22.4IPLV 11.5

Excellent Efficiency throughout the Year

High Efficiency2-stage Compressor

Cool

ing

Wat

er In

let

Tem

p. (˚

C)

Cooling Capacity (%)

35

30

25

20

15

1020 40 60 80 100

Motor SpeedControl+ Vane Control

Motor SpeedControl

Extension ofControl Range

Efficiency is improved by minimizing usage of vane control

25

20

15

10

5

01 2 3 4 5 6 7 8 9 10 11 12

10

20

30

COP

Month

Cool

ing

Wat

er In

let

Tem

p. (˚

C)

Cooling Water Temp.

Inverter Control System

Constant Speed SystemCOP approx.330%

High EfficiencyHeat Exchangers

“Energy Saving Mode” Operation (Peak Cut Operation) (option)

Once the target motor power consumption is set, the chiller is automati-cally controlled by the motor speed, the inlet guide vane opening and the chilled water outlet tempera-ture rise. This control is extremely useful for the energy saving especially in the off-peak season when the motor speed is easily decreased.

“Eco Mode” Operation (Chilled Water Inlet Temp. Control)The chiller is usually controlled so the chilled water outlet temperature to be constant. This "Eco Mode" operation introduces the inlet temperature control, where the chilled water inlet temperature is controlled to be constant. The outlet temperature rises a bit but this is enough for the off-peak season air conditioning.

Cooling Water Variable Flow Operation (option)

When the cooling water variable flow control is applied, the cooling water flow rate is automatically calculated so the total power consumption of the compressor motor and the cooling water pump motor becomes minimum.

Hermonic Filter (option)

Harmonic filter is available to comply the requirement of IEEE 519.

● Comparison of Characteristics between CHW Outlet/Inlet Temp. Control

● Energy Saving Mode Setting Screen

● Characteristics of Cooling Water Variable Flow Operation

20 40 60 80 100

25

20

15

10

5

0

COP

Cooling Capacity (%)

CW InletTemp.

16˚C

20˚C

24˚C

28˚C

COP is improved drastically when cooling load decreases.

COP : approx. 40% Increase

CHW Inlet Temp. ControlCHW Outlet Temp. Control

Energy & Power Saving Operation Functions

Low

Low

Cooling Water flow High

High Minimum Power Consumption

Total Power Consumption(Centrifugal chiller + Cooling Water Pump)

Power Consumption of Centrifugal Chiller

Power Consumption of Cooling Water Pump

PowerConsumption

*GFG-SITSC model

Improvement of the Oil Supply Temperature ControlWhen the compressor rotation speed is low, the friction heat generated at bearings decreases. Therefore, refrigerant flow to oil cooler is controlled to keep the oil temperature property.

Lubricating oil

Oil strainerOil cooler (Cooled by the refrigerant)

Oil heater

Oil pump

Bearing

Refrigerant liquid from the condenser

Electric Valve to Control Oil Temp.

Refrigerant gas to the evaporator

Oil tank

M

25

20

15

10

5

020 40 60 80 100

COP

Cooling Capacity (%)

12˚C

CW InletTemp.

16˚C

20˚C24˚C28˚C

Max. Partial Load

COP 22.4COP is improved by theReduction of Motor Speed

1

Hitachi High Efficiency Inverter Controlled Centrifugal Chiller

Advantages

Hitachi High Efficiency Inverter-controlled Centrifugal Chillers realize energy-saving operation through out the year utilizing variable motor speed control with inverter unit, drastically improving partial load efficiency under low cooling water temperature

condition in off-peak seasons. In addition, the chillers have many unique energy saving functions which satisfy the demand to minimize the energy consump-tion.

5 6

7 8

Model

5.15 - 6.16 5.15 - 6.16 5.35 - 6.40 5.36 - 6.415.58 - 6.68 5.62 - 6.72 5.70 - 6.82 5.63 - 6.73 5.59 - 6.69 5.65 - 6.75 5.74 - 6.86 5.59 - 6.69 5.65 - 6.75 5.66 - 6.77 5.81 - 6.94 5.74 - 6.86 5.78 - 6.91 5.79 - 6.92 5.83 - 6.97 5.84 - 6.99 5.85 - 7.00 5.86 - 7.01 5.89 - 7.04 5.74 - 6.86 5.77 - 6.90 5.69 - 6.81 5.73 - 6.85 5.77 - 6.90 5.84 - 6.99

3,5503,5503,5503,5504,0504,0504,0504,0504,0504,0504,0504,0504,0504,0504,5504,5504,5504,5504,5504,5504,5504,5504,5504,8504,8505,2505,2505,2505,250

1,6501,6501,9001,9001,9002,0002,0002,0002,2502,2502,2502,2502,4002,4002,4002,4002,4002,6002,6002,6002,6002,6002,6003,3003,3003,5003,5003,5003,500

2,2002,2002,4002,4002,4502,4502,4502,4502,6502,6502,6502,8002,8002,8002,8002,8002,8002,9002,9002,9002,9002,9002,9003,4003,4003,7003,7003,7003,700

3,0003,0003,0003,0003,5003,5003,5003,5003,5003,5003,5003,5003,5003,5004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,5004,5004,5004,500

5,8005,8007,0007,0008,4008,7008,9009,10010,70010,70011,10011,10012,40012,40013,90014,10014,30014,80015,80015,80015,80016,00016,00020,50020,70023,70024,00024,20024,500

7,0007,1008,5008,6009,90010,40010,50010,90012,60012,70013,30013,40014,80014,90016,90017,20017,50018,10019,10019,20019,30019,60019,70024,30024,60027,50027,90028,20028,500

COPHeight (C)Width (B)Length (A)

Overall Dimension mm

■ HC-F_GXG-S

REMARKS1. Please consult with our sales staff or distributor for actual specifications for cooling 　capacity, expected kW input and COP, depending on selected operating parameters. 2. The above specifications are subject to change without notice for technical improvements. 　* This table is applicable to chillers to be manufactured for normal water.3. Capacity control range is 100% to approx. 20%. 　(Minimum cooling capacity can be reduced to 10% as option.) 4. Fouling factor is assumed to be 0.018m2K/kW for chilled water and 0.044m2K/kW for 　cooling water. 5. Standard main power source : 380V/400V/415V/440V/460V (up to HC-F1400GXG-S), 　3000V/3300V/6000V/6600V (any capacity, only constant speed), 　10000V/11000V (F900GXG-S and above, only constant speed), AC, 50/60Hz, 3ph. 6. Auxiliary power： AC 380V/50Hz/3φ/3W or 4W.7. Maximum working pressure is 1.0MPa for both chilled and cooling water. If higher maximum 　working pressure is required, please specify at inquiry. (Up to 2.5 MPa is available.)

HC-F300GXG-SHC-F350GXG-SHC-F400GXG-SHC-F450GXG-SHC-F500GXG-SHC-F550GXG-SHC-F600GXG-SHC-F650GXG-SHC-F700GXG-SHC-F750GXG-SHC-F800GXG-SHC-F850GXG-SHC-F900GXG-SHC-F950GXG-SHC-F1000GXG-SHC-F1050GXG-SHC-F1100GXG-SHC-F1150GXG-SHC-F1200GXG-SHC-F1250GXG-SHC-F1300GXG-SHC-F1350GXG-SHC-F1400GXG-S

HC-F1500GXG-S (*1)HC-F1600GXG-S (*1)HC-F1700GXG-S (*1)HC-F1800GXG-S (*1)HC-F1900GXG-S (*1)HC-F2000GXG-S (*1)

300 - 349350 - 350351 - 449450 - 450451 - 549550 - 599600 - 649650 - 650651 - 749750 - 799800 - 800801 - 899900 - 949950 - 999

1,000 - 1,0001,001 - 1,0991,100 - 1,1491,150 - 1,1991,200 - 1,2491,250 - 1,2991,300 - 1,3491,350 - 1,3991,400 - 1,4001,401 - 1,5991,600 - 1,6001,601 - 1,7991,800 - 1,8991,900 - 1,9992,000 - 2,000

Model

5.68 - 6.795.69 - 6.805.73 - 6.855.75 - 6.885.82 - 6.965.83 - 6.985.88 - 7.035.92 - 7.085.82 - 6.965.87 - 7.025.92 - 7.085.94 - 7.105.93 - 7.095.92 - 7.085.96 - 7.125.96 - 7.125.98 - 7.156.00 - 7.176.03 - 7.216.03 - 7.226.09 - 7.296.09 - 7.286.10 - 7.29

4,0504,0504,5504,5504,5504,5504,5504,5504,5504,5504,5504,5504,5504,5505,0505,0505,0505,0505,0505,0505,0505,0505,050

1,6501,6501,9001,9002,0002,0002,0002,0002,2502,2502,2502,2502,4002,4002,4002,4002,4002,6002,6002,6002,6002,6002,600

2,2002,2002,4002,4002,4502,4502,4502,4502,6502,6502,6502,6502,8002,8002,8002,8002,8002,9002,9002,9002,9002,9002,900

6,1006,1007,7007,7009,2009,2009,4009,40011,30011,30011,70011,70013,10013,10014,70014,70014,80015,70016,80016,80016,80017,00017,000

3,5003,5004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,5004,5004,5004,5004,5004,5004,5004,5004,500

7,6007,0009,6009,70011,10011,20011,40011,60013,60013,70014,40014,50016,10016,20018,30018,40018,60019,70020,80020,90021,00021,30021,400

COP Height (C) mm

ExtubationSpace

Width (B)mm

Length (A)mm

Overall Dimension

300 - 325326 - 350351 - 425426 - 450451 - 525526 - 550551 - 625626 - 650651 - 725726 - 750751 - 825826 - 850851 - 925926 - 950

951 - 1,0251,026 - 1,0501,051 - 1,1001,101 - 1,1501,151 - 1,2251,226 - 1,2751,276 - 1,3251,326 - 1,3751,376 - 1,400

300 - 325326 - 350351 - 425426 - 450451 - 525526 - 550551 - 625626 - 650651 - 725726 - 750751 - 825826 - 850851 - 925926 - 950

951 - 1,0251,026 - 1,0501,051 - 1,1001,101 - 1,1501,151 - 1,2251,226 - 1,2751,276 - 1,3251,326 - 1,3751,376 - 1,400

■HC-F_GFG-SSC

HC-F300GFG-SSCHC-F350GFG-SSCHC-F400GFG-SSCHC-F450GFG-SSCHC-F500GFG-SSCHC-F550GFG-SSCHC-F600GFG-SSCHC-F650GFG-SSCHC-F700GFG-SSCHC-F750GFG-SSCHC-F800GFG-SSCHC-F850GFG-SSCHC-F900GFG-SSCHC-F950GFG-SSCHC-F1000GFG-SSCHC-F1050GFG-SSCHC-F1100GFG-SSCHC-F1150GFG-SSCHC-F1200GFG-SSCHC-F1250GFG-SSCHC-F1300GFG-SSCHC-F1350GFG-SSCHC-F1400GFG-SSC

Model

5.57 - 6.665.58 - 6.685.61 - 6.715.65 - 6.755.71 - 6.835.73 - 6.855.77 - 6.905.81 - 6.945.71 - 6.835.76 - 6.895.80 - 6.935.82 - 6.965.81 - 6.945.81 - 6.945.83 - 6.975.84 - 6.995.86 - 7.015.88 - 7.035.91 - 7.065.92 - 7.075.97 - 7.145.97 - 7.145.98 - 7.15

6,1006,1007,7007,7009,2009,2009,4009,40011,30011,30011,70011,70013,10013,10014,70014,70014,80015,70016,80016,80016,80017,00017,000

7,6007,0009,6009,70011,10011,20011,40011,60013,60013,70014,40014,50016,10016,20018,30018,40018,60019,70020,80020,90021,00021,30021,400

COP Height (C) mm

ExtubationSpace

Width (B)mm

Length (A)mm

Overall Dimension

■HC-F_GFG-SITSC

4,0504,0504,5504,5504,5504,5504,5504,5504,5504,5504,5504,5504,5504,5505,0505,0505,0505,0505,0505,0505,0505,0505,050

1,6501,6501,9001,9002,0002,0002,0002,0002,2502,2502,2502,2502,4002,4002,4002,4002,4002,6002,6002,6002,6002,6002,600

2,2002,2002,4002,4002,4502,4502,4502,4502,6502,6502,6502,6502,8002,8002,8002,8002,8002,9002,9002,9002,9002,9002,900

3,5003,5004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,5004,5004,5004,5004,5004,5004,5004,5004,500

HC-F300GFG-SITSCHC-F350GFG-SITSCHC-F400GFG-SITSCHC-F450GFG-SITSCHC-F500GFG-SITSCHC-F550GFG-SITSCHC-F600GFG-SITSCHC-F650GFG-SITSCHC-F700GFG-SITSCHC-F750GFG-SITSCHC-F800GFG-SITSCHC-F850GFG-SITSCHC-F900GFG-SITSCHC-F950GFG-SITSCHC-F1000GFG-SITSCHC-F1050GFG-SITSCHC-F1100GFG-SITSCHC-F1150GFG-SITSCHC-F1200GFG-SITSCHC-F1250GFG-SITSCHC-F1300GFG-SITSCHC-F1350GFG-SITSCHC-F1400GFG-SITSC

Cooling CapacityUSRT

Cooling CapacityUSRT

Model COP

Extubationspace

Operating Weightkg

Shipping Weightkg

Operating Weightkg

Shipping Weightkg

Operating Weightkg

Shipping Weightkg

Operating Weightkg

Shipping Weightkg

■ HC-F_GXG-SIT

HC-F300GXG-SITHC-F350GXG-SITHC-F400GXG-SITHC-F450GXG-SITHC-F500GXG-SITHC-F550GXG-SITHC-F600GXG-SITHC-F650GXG-SITHC-F700GXG-SITHC-F750GXG-SITHC-F800GXG-SITHC-F850GXG-SITHC-F900GXG-SITHC-F950GXG-SITHC-F1000GXG-SITHC-F1050GXG-SITHC-F1100GXG-SITHC-F1150GXG-SITHC-F1200GXG-SITHC-F1250GXG-SITHC-F1300GXG-SITHC-F1350GXG-SIT

300350400450451550600650651750800801900950

1,0001,0011,1001,1501,2001,2501,3001,350

3493994494505495996496507497998008999499991,0991,0991,1491,1991,2491,2991,3491,390

----------------------

----------------------

5.145.155.295.295.475.515.595.525.485.545.635.485.545.555.695.635.675.675.725.735.735.74

6.15 6.16 6.33 6.33 6.55 6.59 6.69 6.60 6.56 6.62 6.73 6.56 6.62 6.63 6.81 6.73 6.78 6.78 6.84 6.85 6.85 6.86

Extubationspace

3,0003,0003,0003,0003,5003,5003,5003,5003,5003,5003,5003,5003,5003,5004,0004,0004,0004,0004,0004,0004,0004,000

5,8005,8007,0007,0008,4008,7008,9009,10010,70010,70011,10011,10012,40012,40013,90014,10014,30014,80015,80015,80015,80016,000

7,0007,1008,5008,6009,90010,40010,50010,90012,60012,70013,30013,40014,80014,90016,90017,20017,50018,10019,10019,20019,30019,600

2,2002,2002,4002,4002,4502,4502,4502,4502,6502,6502,6502,6502,8002,8002,8002,8002,9002,9002,9002,9002,9002,900

Height (C)

1,6501,6501,9001,9001,9002,0002,0002,0002,2502,2502,2502,2502,4002,4002,4002,4002,6002,6002,6002,6002,6002,600

Width (B)

3,5503,5503,5503,5504,0504,0504,0504,0504,0504,0504,0504,0504,0504,0504,5504,5504,5504,5504,5504,5504,5504,550

Length (A)

Overall Dimension mm

Model

■ Starter Panel (Open star-delta)

300 ～ 450500 ～ 600650 ～ 800850 ～ 10001050 ～ 1400

Length800800

1,0001,0001,500

Width600750800800

1,000

Height2,1001,7001,9002,2002,100

Dimensions (mm)

GFG-SSC

Model

■ Inverter Panel

300350 ～ 450500 ～ 650700 ～ 850900 ～ 1400

Length1,7001,9001,9002,1002,200

Width950950950950950

Height1,9001,9002,3002,3002,450

Dimensions (mm)

GFG-SITSC

Model

■ Starter Panel (Open star-delta)

300 ～ 450500 ～ 600650 ～ 800850 ～ 10001050 ～ 1400

Length800800

1,0001,0001,500

Width600750800800

1,000

Height2,1001,7001,9002,2002,100

Dimensions (mm)

GXG-S

Model

■ Inverter Panel

300350 ～ 450500 ～ 650700 ～ 850900 ～ 1350

Length1,7001,9001,9002,1002,200

Width950950950950950

Height1,9001,9002,3002,3002,450

Dimensions (mm)

GXG-SIT

Specifications

REMARKS1. Please consult with our sales staff or distributor for actual specifications for cooling capacity, expected kW input and COP, depending on selected operating parameters.2. The above specifications are subject to change without notice for technical improvements.　* This table is applicable to chillers to be manufactured for normal water.3. Capacity control range is 100% to approx. 20%. (Minimum cooling capacity can be reduced to 10% as option.)4. Fouling factor is assumed to be 0.018m2K/kW for chilled water and 0.044m2K/kW for cooling water.5. Standard main power source : 380V/400V/415V/440V/460V (up to HC-F1400GFG-S), 3000V/3300V/6000V/6600V (any capacity, only constant speed), 10000V/11000V (F900GFG-S and above, only constant speed), AC, 50/60Hz, 3ph.6. Auxiliary power： AC 380V/50Hz/3φ/3W or 4W.7. Maximum working pressure is 1.0MPa for both chilled and cooling water. If higher maximum working pressure is required, please specify at inquiry. (Up to 2.5 MPa is available.)

Constant Speed

Inverter-controlled

Constant Speed

Inverter-controlled*1. Power sourse: High /Middle tension Standard starting method: Reactor

Cooling CapacityUSRT

Cooling CapacityUSRT

7 8

Model

5.15 - 6.16 5.15 - 6.16 5.35 - 6.40 5.36 - 6.415.58 - 6.68 5.62 - 6.72 5.70 - 6.82 5.63 - 6.73 5.59 - 6.69 5.65 - 6.75 5.74 - 6.86 5.59 - 6.69 5.65 - 6.75 5.66 - 6.77 5.81 - 6.94 5.74 - 6.86 5.78 - 6.91 5.79 - 6.92 5.83 - 6.97 5.84 - 6.99 5.85 - 7.00 5.86 - 7.01 5.89 - 7.04 5.74 - 6.86 5.77 - 6.90 5.69 - 6.81 5.73 - 6.85 5.77 - 6.90 5.84 - 6.99

3,5503,5503,5503,5504,0504,0504,0504,0504,0504,0504,0504,0504,0504,0504,5504,5504,5504,5504,5504,5504,5504,5504,5504,8504,8505,2505,2505,2505,250

1,6501,6501,9001,9001,9002,0002,0002,0002,2502,2502,2502,2502,4002,4002,4002,4002,4002,6002,6002,6002,6002,6002,6003,3003,3003,5003,5003,5003,500

2,2002,2002,4002,4002,4502,4502,4502,4502,6502,6502,6502,8002,8002,8002,8002,8002,8002,9002,9002,9002,9002,9002,9003,4003,4003,7003,7003,7003,700

3,0003,0003,0003,0003,5003,5003,5003,5003,5003,5003,5003,5003,5003,5004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,5004,5004,5004,500

5,8005,8007,0007,0008,4008,7008,9009,10010,70010,70011,10011,10012,40012,40013,90014,10014,30014,80015,80015,80015,80016,00016,00020,50020,70023,70024,00024,20024,500

7,0007,1008,5008,6009,90010,40010,50010,90012,60012,70013,30013,40014,80014,90016,90017,20017,50018,10019,10019,20019,30019,60019,70024,30024,60027,50027,90028,20028,500

COPHeight (C)Width (B)Length (A)

Overall Dimension mm

■ HC-F_GXG-S

REMARKS1. Please consult with our sales staff or distributor for actual specifications for cooling 　capacity, expected kW input and COP, depending on selected operating parameters. 2. The above specifications are subject to change without notice for technical improvements. 　* This table is applicable to chillers to be manufactured for normal water.3. Capacity control range is 100% to approx. 20%. 　(Minimum cooling capacity can be reduced to 10% as option.) 4. Fouling factor is assumed to be 0.018m2K/kW for chilled water and 0.044m2K/kW for 　cooling water. 5. Standard main power source : 380V/400V/415V/440V/460V (up to HC-F1400GXG-S), 　3000V/3300V/6000V/6600V (any capacity, only constant speed), 　10000V/11000V (F900GXG-S and above, only constant speed), AC, 50/60Hz, 3ph. 6. Auxiliary power： AC 380V/50Hz/3φ/3W or 4W.7. Maximum working pressure is 1.0MPa for both chilled and cooling water. If higher maximum 　working pressure is required, please specify at inquiry. (Up to 2.5 MPa is available.)

HC-F300GXG-SHC-F350GXG-SHC-F400GXG-SHC-F450GXG-SHC-F500GXG-SHC-F550GXG-SHC-F600GXG-SHC-F650GXG-SHC-F700GXG-SHC-F750GXG-SHC-F800GXG-SHC-F850GXG-SHC-F900GXG-SHC-F950GXG-SHC-F1000GXG-SHC-F1050GXG-SHC-F1100GXG-SHC-F1150GXG-SHC-F1200GXG-SHC-F1250GXG-SHC-F1300GXG-SHC-F1350GXG-SHC-F1400GXG-S

HC-F1500GXG-S (*1)HC-F1600GXG-S (*1)HC-F1700GXG-S (*1)HC-F1800GXG-S (*1)HC-F1900GXG-S (*1)HC-F2000GXG-S (*1)

300 - 349350 - 350351 - 449450 - 450451 - 549550 - 599600 - 649650 - 650651 - 749750 - 799800 - 800801 - 899900 - 949950 - 999

1,000 - 1,0001,001 - 1,0991,100 - 1,1491,150 - 1,1991,200 - 1,2491,250 - 1,2991,300 - 1,3491,350 - 1,3991,400 - 1,4001,401 - 1,5991,600 - 1,6001,601 - 1,7991,800 - 1,8991,900 - 1,9992,000 - 2,000

Model

5.68 - 6.795.69 - 6.805.73 - 6.855.75 - 6.885.82 - 6.965.83 - 6.985.88 - 7.035.92 - 7.085.82 - 6.965.87 - 7.025.92 - 7.085.94 - 7.105.93 - 7.095.92 - 7.085.96 - 7.125.96 - 7.125.98 - 7.156.00 - 7.176.03 - 7.216.03 - 7.226.09 - 7.296.09 - 7.286.10 - 7.29

4,0504,0504,5504,5504,5504,5504,5504,5504,5504,5504,5504,5504,5504,5505,0505,0505,0505,0505,0505,0505,0505,0505,050

1,6501,6501,9001,9002,0002,0002,0002,0002,2502,2502,2502,2502,4002,4002,4002,4002,4002,6002,6002,6002,6002,6002,600

2,2002,2002,4002,4002,4502,4502,4502,4502,6502,6502,6502,6502,8002,8002,8002,8002,8002,9002,9002,9002,9002,9002,900

6,1006,1007,7007,7009,2009,2009,4009,40011,30011,30011,70011,70013,10013,10014,70014,70014,80015,70016,80016,80016,80017,00017,000

3,5003,5004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,5004,5004,5004,5004,5004,5004,5004,5004,500

7,6007,0009,6009,70011,10011,20011,40011,60013,60013,70014,40014,50016,10016,20018,30018,40018,60019,70020,80020,90021,00021,30021,400

COP Height (C) mm

ExtubationSpace

Width (B)mm

Length (A)mm

Overall Dimension

300 - 325326 - 350351 - 425426 - 450451 - 525526 - 550551 - 625626 - 650651 - 725726 - 750751 - 825826 - 850851 - 925926 - 950

951 - 1,0251,026 - 1,0501,051 - 1,1001,101 - 1,1501,151 - 1,2251,226 - 1,2751,276 - 1,3251,326 - 1,3751,376 - 1,400

300 - 325326 - 350351 - 425426 - 450451 - 525526 - 550551 - 625626 - 650651 - 725726 - 750751 - 825826 - 850851 - 925926 - 950

951 - 1,0251,026 - 1,0501,051 - 1,1001,101 - 1,1501,151 - 1,2251,226 - 1,2751,276 - 1,3251,326 - 1,3751,376 - 1,400

■HC-F_GFG-SSC

HC-F300GFG-SSCHC-F350GFG-SSCHC-F400GFG-SSCHC-F450GFG-SSCHC-F500GFG-SSCHC-F550GFG-SSCHC-F600GFG-SSCHC-F650GFG-SSCHC-F700GFG-SSCHC-F750GFG-SSCHC-F800GFG-SSCHC-F850GFG-SSCHC-F900GFG-SSCHC-F950GFG-SSCHC-F1000GFG-SSCHC-F1050GFG-SSCHC-F1100GFG-SSCHC-F1150GFG-SSCHC-F1200GFG-SSCHC-F1250GFG-SSCHC-F1300GFG-SSCHC-F1350GFG-SSCHC-F1400GFG-SSC

Model

5.57 - 6.665.58 - 6.685.61 - 6.715.65 - 6.755.71 - 6.835.73 - 6.855.77 - 6.905.81 - 6.945.71 - 6.835.76 - 6.895.80 - 6.935.82 - 6.965.81 - 6.945.81 - 6.945.83 - 6.975.84 - 6.995.86 - 7.015.88 - 7.035.91 - 7.065.92 - 7.075.97 - 7.145.97 - 7.145.98 - 7.15

6,1006,1007,7007,7009,2009,2009,4009,40011,30011,30011,70011,70013,10013,10014,70014,70014,80015,70016,80016,80016,80017,00017,000

7,6007,0009,6009,70011,10011,20011,40011,60013,60013,70014,40014,50016,10016,20018,30018,40018,60019,70020,80020,90021,00021,30021,400

COP Height (C) mm

ExtubationSpace

Width (B)mm

Length (A)mm

Overall Dimension

■HC-F_GFG-SITSC

4,0504,0504,5504,5504,5504,5504,5504,5504,5504,5504,5504,5504,5504,5505,0505,0505,0505,0505,0505,0505,0505,0505,050

1,6501,6501,9001,9002,0002,0002,0002,0002,2502,2502,2502,2502,4002,4002,4002,4002,4002,6002,6002,6002,6002,6002,600

2,2002,2002,4002,4002,4502,4502,4502,4502,6502,6502,6502,6502,8002,8002,8002,8002,8002,9002,9002,9002,9002,9002,900

3,5003,5004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,5004,5004,5004,5004,5004,5004,5004,5004,500

HC-F300GFG-SITSCHC-F350GFG-SITSCHC-F400GFG-SITSCHC-F450GFG-SITSCHC-F500GFG-SITSCHC-F550GFG-SITSCHC-F600GFG-SITSCHC-F650GFG-SITSCHC-F700GFG-SITSCHC-F750GFG-SITSCHC-F800GFG-SITSCHC-F850GFG-SITSCHC-F900GFG-SITSCHC-F950GFG-SITSCHC-F1000GFG-SITSCHC-F1050GFG-SITSCHC-F1100GFG-SITSCHC-F1150GFG-SITSCHC-F1200GFG-SITSCHC-F1250GFG-SITSCHC-F1300GFG-SITSCHC-F1350GFG-SITSCHC-F1400GFG-SITSC

Cooling CapacityUSRT

Cooling CapacityUSRT

Model COP

Extubationspace

Operating Weightkg

Shipping Weightkg

Operating Weightkg

Shipping Weightkg

Operating Weightkg

Shipping Weightkg

Operating Weightkg

Shipping Weightkg

■ HC-F_GXG-SIT

HC-F300GXG-SITHC-F350GXG-SITHC-F400GXG-SITHC-F450GXG-SITHC-F500GXG-SITHC-F550GXG-SITHC-F600GXG-SITHC-F650GXG-SITHC-F700GXG-SITHC-F750GXG-SITHC-F800GXG-SITHC-F850GXG-SITHC-F900GXG-SITHC-F950GXG-SITHC-F1000GXG-SITHC-F1050GXG-SITHC-F1100GXG-SITHC-F1150GXG-SITHC-F1200GXG-SITHC-F1250GXG-SITHC-F1300GXG-SITHC-F1350GXG-SIT

300350400450451550600650651750800801900950

1,0001,0011,1001,1501,2001,2501,3001,350

3493994494505495996496507497998008999499991,0991,0991,1491,1991,2491,2991,3491,390

----------------------

----------------------

5.145.155.295.295.475.515.595.525.485.545.635.485.545.555.695.635.675.675.725.735.735.74

6.15 6.16 6.33 6.33 6.55 6.59 6.69 6.60 6.56 6.62 6.73 6.56 6.62 6.63 6.81 6.73 6.78 6.78 6.84 6.85 6.85 6.86

Extubationspace

3,0003,0003,0003,0003,5003,5003,5003,5003,5003,5003,5003,5003,5003,5004,0004,0004,0004,0004,0004,0004,0004,000

5,8005,8007,0007,0008,4008,7008,9009,10010,70010,70011,10011,10012,40012,40013,90014,10014,30014,80015,80015,80015,80016,000

7,0007,1008,5008,6009,90010,40010,50010,90012,60012,70013,30013,40014,80014,90016,90017,20017,50018,10019,10019,20019,30019,600

2,2002,2002,4002,4002,4502,4502,4502,4502,6502,6502,6502,6502,8002,8002,8002,8002,9002,9002,9002,9002,9002,900

Height (C)

1,6501,6501,9001,9001,9002,0002,0002,0002,2502,2502,2502,2502,4002,4002,4002,4002,6002,6002,6002,6002,6002,600

Width (B)

3,5503,5503,5503,5504,0504,0504,0504,0504,0504,0504,0504,0504,0504,0504,5504,5504,5504,5504,5504,5504,5504,550

Length (A)

Overall Dimension mm

Model

■ Starter Panel (Open star-delta)

300 ～ 450500 ～ 600650 ～ 800850 ～ 10001050 ～ 1400

Length800800

1,0001,0001,500

Width600750800800

1,000

Height2,1001,7001,9002,2002,100

Dimensions (mm)

GFG-SSC

Model

■ Inverter Panel

300350 ～ 450500 ～ 650700 ～ 850900 ～ 1400

Length1,7001,9001,9002,1002,200

Width950950950950950

Height1,9001,9002,3002,3002,450

Dimensions (mm)

GFG-SITSC

Model

■ Starter Panel (Open star-delta)

300 ～ 450500 ～ 600650 ～ 800850 ～ 10001050 ～ 1400

Length800800

1,0001,0001,500

Width600750800800

1,000

Height2,1001,7001,9002,2002,100

Dimensions (mm)

GXG-S

Model

■ Inverter Panel

300350 ～ 450500 ～ 650700 ～ 850900 ～ 1350

Length1,7001,9001,9002,1002,200

Width950950950950950

Height1,9001,9002,3002,3002,450

Dimensions (mm)

GXG-SIT

Specifications

REMARKS1. Please consult with our sales staff or distributor for actual specifications for cooling capacity, expected kW input and COP, depending on selected operating parameters.2. The above specifications are subject to change without notice for technical improvements.　* This table is applicable to chillers to be manufactured for normal water.3. Capacity control range is 100% to approx. 20%. (Minimum cooling capacity can be reduced to 10% as option.)4. Fouling factor is assumed to be 0.018m2K/kW for chilled water and 0.044m2K/kW for cooling water.5. Standard main power source : 380V/400V/415V/440V/460V (up to HC-F1400GFG-S), 3000V/3300V/6000V/6600V (any capacity, only constant speed), 10000V/11000V (F900GFG-S and above, only constant speed), AC, 50/60Hz, 3ph.6. Auxiliary power： AC 380V/50Hz/3φ/3W or 4W.7. Maximum working pressure is 1.0MPa for both chilled and cooling water. If higher maximum working pressure is required, please specify at inquiry. (Up to 2.5 MPa is available.)

Constant Speed

Inverter-controlled

Constant Speed

Inverter-controlled*1. Power sourse: High /Middle tension Standard starting method: Reactor

Cooling CapacityUSRT

Cooling CapacityUSRT

9 10

The following table shows the standard scope of supply, but the actual scope depends on the contract. Please consult with our sales staff or distributor.

Item

Main Equipment

Auxiliary Equipment

Coating

Out of Supply Scope

Standard Scope

Standard Scope of Supply

a b c d e f g h i

■Positional Dimension of Water Piping (unit: mm)Positional dimension of nozzleModel: HCF_GFG-SSC

HCF_GFG-SITSC

300, 350400, 450500, 550600, 650700 ~ 850900, 950

1000, 105011001150

1200 ~ 1400

673715734734810780780780858858

933975

1,0271,0271,1551,1601,1601,1601,2781,278

398442474494430455475495456456

616642695715730815835855836836

33101102102107139139139164164

339358400400500480480480500500

444525535535562640640640668668

290292320320380380380380444444

420420420420420420420420420420

a b c d e f g h iPositional dimension of nozzle

300350, 400

450500, 550

600650, 700

750800

850, 900950

1000, 10501100, 11501200, 12501300 ~ 14001450, 15001600, 17001800, 1900

2000

673714734734734810810800800800800858858979979

1,0051,0051,005

933974

1,0271,0271,0271,1551,1551,1801,1801,1801,1801,2781,2781,4691,4691,5651,5651,565

398422455475495410430436456456475437456523543584603623

616622676696716710730796816816835817836963983

1,0241,0431,063

37899090909595139139139139164164257257269269269

340358400400400500500480480480480500500600600700700700

444525535535535562562640640640640668668925925897897897

290292320320320380380380380380380444444500500580580580

420420420420420420420420420420420420420612612620620620

This dimensional outline drawing shows a standard nozzle location. Please consult with our sales staff or distributor in case of a 3-pass or 4-pass system.

Dimensional Outline Drawing

REMARKS1. Please consult with our sales staff or distributor for actual specifications for cooling 　capacity, expected kW input and COP, depending on selected operating parameters. 2. The above specifications are subject to change without notice for technical improvements. 　* This table is applicable to chillers to be manufactured for normal water.3. Capacity control range is 100% to approx. 20%. 　(Minimum cooling capacity can be reduced to 10% as option.)4. Fouling factor is assumed to be 0.018m2K/kW for chilled water and 0.044m2K/kW for 　cooling water.5. Standard main power source : 380V/400V/415V/440V/460V (up to HC-F1250GSG-S), 　　3000V/3300V/6000V/6600V (any capacity, only constant speed), 　10000V/11000V (F800GSG-S and above, only constant speed), AC, 50/60Hz, 3ph. 6. Auxiliary power： AC 380V/50Hz/3φ/3W or 4W. 7. Maximum working pressure is 1.0MPa for both chilled and cooling water. 　If higher maximum working pressure is required, please specify at inquiry. 　(Up to 2.5 MPa is available.)

Model COPHeight [C] ExtubationspaceWidth [B]Length [A]

Overall Dimension (mm)

300301351401451501551601651701751801851901951

1,0011,0511,1011,1511,201

3003504004505005506006507007508008509009501,0001,0501,1001,1501,2001,250

- - - - - - - - - - - - - - - - - - - -

4.57 4.59 4.70 4.73 4.96 4.97 4.98 5.02 5.09 5.14 5.23 5.27 5.29 5.12 5.17 5.26 5.23 5.26 5.30 5.33

5.47 5.49 5.62 5.65 5.93 5.94 5.95 6.01 6.08 6.15 6.26 6.30 6.33 6.13 6.18 6.29 6.26 6.29 6.34 6.37

- - - - - - - - - - - - - - - - - - - -

2,7502,8002,8003,2503,2503,2503,2503,5003,5003,5003,5003,5003,7503,7503,7503,7503,7503,7503,7503,750

1,9002,0002,0002,1002,1002,1002,1002,3502,3502,3502,4502,4502,4502,4502,4502,4502,6502,6502,6502,650

2,3502,3502,3502,4502,4502,4502,4502,7002,7002,7002,8002,8002,8002,8002,8002,8002,9502,9502,9502,950

2,0002,0002,0002,5002,5002,5002,5002,8002,8002,8002,8002,8002,8003,0003,0003,0003,0003,0003,0003,000

5,5006,8006,9008,4008,5008,6008,80010,20010,30010,40011,50011,60011,70012,20012,30012,40013,20013,30013,40013,500

6,7007,5007,6009,3009,4009,5009,80011,60011,70011,80013,00013,20013,30014,20014,30014,50015,30015,40015,50015,600

■ HC-F_GSG-SIT

HC-F300GSG-SITHC-F350GSG-SITHC-F400GSG-SITHC-F450GSG-SITHC-F500GSG-SITHC-F550GSG-SITHC-F600GSG-SITHC-F650GSG-SITHC-F700GSG-SITHC-F750GSG-SITHC-F800GSG-SITHC-F850GSG-SITHC-F900GSG-SITHC-F950GSG-SITHC-F1000GSG-SITHC-F1050GSG-SITHC-F1100GSG-SITHC-F1150GSG-SITHC-F1200GSG-SITHC-F1250GSG-SIT

a b c d e f g h iPositional dimension of nozzle

300, 350400, 450

500550

600, 650700 ~ 850900, 950

1000, 10501100, 11501200 ~ 1350

140015001600

1700, 18001900, 2000

673715714734734810780780858858858979979

1,0051,005

933975974

1,0271,0271,1551,1601,1601,2781,2781,2781,4691,4691,5651,565

398442462474494430455475456475475562582603623

616642662695715730815835836855855

1,0021,0221,0431,063

33101101102102107139139164164164257257269269

339358358400400500480480500500500600600700700

444525525535535562640640668668668925925897897

290292292320320380380380444444444500500580580

420420420420420420420420420420420612612620620

4.60 - 5.504.66 - 5.584.75 - 5.684.78 - 5.725.02 - 6.015.00 - 5.975.03 - 6.025.07 - 6.065.13 - 6.145.17 - 6.185.34 - 6.385.38 - 6.445.39 - 6.455.19 - 6.205.23 - 6.255.26 - 6.295.29 - 6.335.33 - 6.375.35 - 6.395.38 - 6.445.37 - 6.425.38 - 6.445.38 - 6.445.39 - 6.455.40 - 6.465.47 - 6.555.46 - 6.535.39 - 6.455.46 - 6.525.49 - 6.57

2,7502,8002,8003,2503,2503,2503,2503,5003,5003,5003,5003,5003,7503,7503,7503,7503,7503,7503,7503,7504,7004,7004,7004,7004,7005,0005,0005,0005,0005,000

1,9002,0002,0002,1002,1002,1002,1002,3502,3502,3502,4502,4502,4502,4502,4502,4502,6502,6502,6502,6503,3003,3003,3003,3003,3003,5003,5003,5003,5003,500

2,3502,3502,3502,4502,4502,4502,4502,7002,7002,7002,8002,8002,8002,8002,8002,8002,9502,9502,9502,9503,4003,4003,4003,4003,4003,7003,7003,7003,7003,700

2,0002,0002,0002,5002,5002,5002,5002,8002,8002,8002,8002,8002,8003,0003,0003,0003,0003,0003,0003,0003,5003,5003,5003,5003,5004,0004,0004,0004,0004,000

5,5006,8006,9008,4008,5008,6008,80010,20010,30010,40011,50011,60011,70012,20012,30012,40013,20013,30013,40013,50018,60018,70018,80018,90019,00021,00021,20021,50021,70022,000

6,7007,5007,6009,3009,4009,5009,80011,60011,70011,80013,00013,20013,30014,20014,30014,50015,30015,40015,50015,60021,60021,70021,80022,00022,10024,70025,00025,40025,70026,000

HC-F300GSG-SHC-F350GSG-SHC-F400GSG-SHC-F450GSG-SHC-F500GSG-SHC-F550GSG-SHC-F600GSG-SHC-F650GSG-SHC-F700GSG-SHC-F750GSG-SHC-F800GSG-SHC-F850GSG-SHC-F900GSG-SHC-F950GSG-SHC-F1000GSG-SHC-F1050GSG-SHC-F1100GSG-SHC-F1150GSG-SHC-F1200GSG-SHC-F1250GSG-S

HC-F1300GSG-S (*1)HC-F1350GSG-S (*1)HC-F1400GSG-S (*1)HC-F1450GSG-S (*1)HC-F1500GSG-S (*1)HC-F1600GSG-S (*1)HC-F1700GSG-S (*1)HC-F1800GSG-S (*1)HC-F1900GSG-S (*1)HC-F2000GSG-S (*1)

300 - 300301 - 350300 - 400401 - 450451 - 500501 - 550551 - 600601 - 650651 - 700701 - 750751 - 800801 - 850851 - 900901 - 950

951 - 1,0001,001 - 1,0501,051 - 1,1001,101 - 1,1501,151 - 1,2001,201 - 1,2501,251 - 1,3001,301 - 1,3501,351 - 1,4001,401 - 1,4501,451 - 1,5001,501 - 1,6001,601 - 1,7001,701 - 1,8001,801 - 1,9001,901 - 2,000

■ HC-F_GSG-S

Model COPHeight [C] ExtubationspaceWidth [B]Length [A]

Overall Dimension (mm)

Specifications Dimensional Data

Model: HCF_GXG-S HCF_GXG-SIT

Model: HCF_GSG-S HCF_GSG-SIT

Constant Speed

Inverter-controlled

Model

■ Starter Panel (Open star-delta)

300 ～ 400450 ～ 500550 ～ 800850 ～ 900950 ～ 1250

Length800800

1,0001,0001,500

Width600750800800

1,000

Height2,1001,7001,9002,2002,100

Dimensions (mm)

GSG-S

Model

■ Inverter PanelDimensions (mm)

GSG-SIT

300～400450～600650～800850～1250

Length1,9001,9002,1002,200

Width950950950950

Height1,9002,3002,3002,450

Compressor, Main motor, Lubrication system, Heat exchanger

Safety device, Control panel, Standard accessories (Corrugated rubber vibration insulator plates, Oil strainer elements, Gasket for oil strainer elements, Dryer), Starter (optional)

Chiller main unit: Anti-corrosive prime coatingControl panel: Finish coat (color: Munsell 5Y8/1 gloss)Starter (optional): Finish coat (color: Munsell 5Y7/1 semigloss)

Foundation work, Carrying-in, Installation, Piping work, Cold insulation, Primary and secondary side electrical wiring, Commissioning for total system, Forced ventilation system, Outdoor discharge piping for safety valve, Counter flange, Bolt, Nut, Gasket, Foundationbolt, Refrigerant

*1. Power sourse: High /Middle tension Standard starting method: Reactor

iLength（A）

ab

cd

e f g h

Width（B）

Hei

ght（

C）

Cooling water outletChilled water outlet

Cooling water inletChilled water inletControl panel

CompressorMain motor

EconomizerMotor terminal boxCondenser

Evaporator Safety valve for evaporator

Safety valve for condenser

Side B Side A

Cooling CapacityUSRT

Cooling CapacityUSRT kg

Operating Weightkg

Shipping Weight

kgOperating Weight

kgShipping Weight

9 10

The following table shows the standard scope of supply, but the actual scope depends on the contract. Please consult with our sales staff or distributor.

Item

Main Equipment

Auxiliary Equipment

Coating

Out of Supply Scope

Standard Scope

Standard Scope of Supply

a b c d e f g h i

■Positional Dimension of Water Piping (unit: mm)Positional dimension of nozzleModel: HCF_GFG-SSC

HCF_GFG-SITSC

300, 350400, 450500, 550600, 650

700 ~ 850900, 950

1000, 105011001150

1200 ~ 1400

673715734734810780780780858858

933975

1,0271,0271,1551,1601,1601,1601,2781,278

398442474494430455475495456456

616642695715730815835855836836

33101102102107139139139164164

339358400400500480480480500500

444525535535562640640640668668

290292320320380380380380444444

420420420420420420420420420420

a b c d e f g h iPositional dimension of nozzle

300350, 400

450500, 550

600650, 700

750800

850, 900950

1000, 10501100, 11501200, 12501300 ~ 14001450, 15001600, 17001800, 1900

2000

673714734734734810810800800800800858858979979

1,0051,0051,005

933974

1,0271,0271,0271,1551,1551,1801,1801,1801,1801,2781,2781,4691,4691,5651,5651,565

398422455475495410430436456456475437456523543584603623

616622676696716710730796816816835817836963983

1,0241,0431,063

37899090909595139139139139164164257257269269269

340358400400400500500480480480480500500600600700700700

444525535535535562562640640640640668668925925897897897

290292320320320380380380380380380444444500500580580580

420420420420420420420420420420420420420612612620620620

This dimensional outline drawing shows a standard nozzle location. Please consult with our sales staff or distributor in case of a 3-pass or 4-pass system.

Dimensional Outline Drawing

REMARKS1. Please consult with our sales staff or distributor for actual specifications for cooling 　capacity, expected kW input and COP, depending on selected operating parameters. 2. The above specifications are subject to change without notice for technical improvements. 　* This table is applicable to chillers to be manufactured for normal water.3. Capacity control range is 100% to approx. 20%. 　(Minimum cooling capacity can be reduced to 10% as option.)4. Fouling factor is assumed to be 0.018m2K/kW for chilled water and 0.044m2K/kW for 　cooling water.5. Standard main power source : 380V/400V/415V/440V/460V (up to HC-F1250GSG-S), 　　3000V/3300V/6000V/6600V (any capacity, only constant speed), 　10000V/11000V (F800GSG-S and above, only constant speed), AC, 50/60Hz, 3ph. 6. Auxiliary power： AC 380V/50Hz/3φ/3W or 4W. 7. Maximum working pressure is 1.0MPa for both chilled and cooling water. 　If higher maximum working pressure is required, please specify at inquiry. 　(Up to 2.5 MPa is available.)

Model COPHeight [C] ExtubationspaceWidth [B]Length [A]

Overall Dimension (mm)

300301351401451501551601651701751801851901951

1,0011,0511,1011,1511,201

3003504004505005506006507007508008509009501,0001,0501,1001,1501,2001,250

- - - - - - - - - - - - - - - - - - - -

4.57 4.59 4.70 4.73 4.96 4.97 4.98 5.02 5.09 5.14 5.23 5.27 5.29 5.12 5.17 5.26 5.23 5.26 5.30 5.33

5.47 5.49 5.62 5.65 5.93 5.94 5.95 6.01 6.08 6.15 6.26 6.30 6.33 6.13 6.18 6.29 6.26 6.29 6.34 6.37

- - - - - - - - - - - - - - - - - - - -

2,7502,8002,8003,2503,2503,2503,2503,5003,5003,5003,5003,5003,7503,7503,7503,7503,7503,7503,7503,750

1,9002,0002,0002,1002,1002,1002,1002,3502,3502,3502,4502,4502,4502,4502,4502,4502,6502,6502,6502,650

2,3502,3502,3502,4502,4502,4502,4502,7002,7002,7002,8002,8002,8002,8002,8002,8002,9502,9502,9502,950

2,0002,0002,0002,5002,5002,5002,5002,8002,8002,8002,8002,8002,8003,0003,0003,0003,0003,0003,0003,000

5,5006,8006,9008,4008,5008,6008,80010,20010,30010,40011,50011,60011,70012,20012,30012,40013,20013,30013,40013,500

6,7007,5007,6009,3009,4009,5009,80011,60011,70011,80013,00013,20013,30014,20014,30014,50015,30015,40015,50015,600

■ HC-F_GSG-SIT

HC-F300GSG-SITHC-F350GSG-SITHC-F400GSG-SITHC-F450GSG-SITHC-F500GSG-SITHC-F550GSG-SITHC-F600GSG-SITHC-F650GSG-SITHC-F700GSG-SITHC-F750GSG-SITHC-F800GSG-SITHC-F850GSG-SITHC-F900GSG-SITHC-F950GSG-SITHC-F1000GSG-SITHC-F1050GSG-SITHC-F1100GSG-SITHC-F1150GSG-SITHC-F1200GSG-SITHC-F1250GSG-SIT

a b c d e f g h iPositional dimension of nozzle

300, 350400, 450

500550

600, 650700 ~ 850900, 950

1000, 10501100, 1150

1200 ~ 1350140015001600

1700, 18001900, 2000

673715714734734810780780858858858979979

1,0051,005

933975974

1,0271,0271,1551,1601,1601,2781,2781,2781,4691,4691,5651,565

398442462474494430455475456475475562582603623

616642662695715730815835836855855

1,0021,0221,0431,063

33101101102102107139139164164164257257269269

339358358400400500480480500500500600600700700

444525525535535562640640668668668925925897897

290292292320320380380380444444444500500580580

420420420420420420420420420420420612612620620

4.60 - 5.504.66 - 5.584.75 - 5.684.78 - 5.725.02 - 6.015.00 - 5.975.03 - 6.025.07 - 6.065.13 - 6.145.17 - 6.185.34 - 6.385.38 - 6.445.39 - 6.455.19 - 6.205.23 - 6.255.26 - 6.295.29 - 6.335.33 - 6.375.35 - 6.395.38 - 6.445.37 - 6.425.38 - 6.445.38 - 6.445.39 - 6.455.40 - 6.465.47 - 6.555.46 - 6.535.39 - 6.455.46 - 6.525.49 - 6.57

2,7502,8002,8003,2503,2503,2503,2503,5003,5003,5003,5003,5003,7503,7503,7503,7503,7503,7503,7503,7504,7004,7004,7004,7004,7005,0005,0005,0005,0005,000

1,9002,0002,0002,1002,1002,1002,1002,3502,3502,3502,4502,4502,4502,4502,4502,4502,6502,6502,6502,6503,3003,3003,3003,3003,3003,5003,5003,5003,5003,500

2,3502,3502,3502,4502,4502,4502,4502,7002,7002,7002,8002,8002,8002,8002,8002,8002,9502,9502,9502,9503,4003,4003,4003,4003,4003,7003,7003,7003,7003,700

2,0002,0002,0002,5002,5002,5002,5002,8002,8002,8002,8002,8002,8003,0003,0003,0003,0003,0003,0003,0003,5003,5003,5003,5003,5004,0004,0004,0004,0004,000

5,5006,8006,9008,4008,5008,6008,80010,20010,30010,40011,50011,60011,70012,20012,30012,40013,20013,30013,40013,50018,60018,70018,80018,90019,00021,00021,20021,50021,70022,000

6,7007,5007,6009,3009,4009,5009,80011,60011,70011,80013,00013,20013,30014,20014,30014,50015,30015,40015,50015,60021,60021,70021,80022,00022,10024,70025,00025,40025,70026,000

HC-F300GSG-SHC-F350GSG-SHC-F400GSG-SHC-F450GSG-SHC-F500GSG-SHC-F550GSG-SHC-F600GSG-SHC-F650GSG-SHC-F700GSG-SHC-F750GSG-SHC-F800GSG-SHC-F850GSG-SHC-F900GSG-SHC-F950GSG-SHC-F1000GSG-SHC-F1050GSG-SHC-F1100GSG-SHC-F1150GSG-SHC-F1200GSG-SHC-F1250GSG-S

HC-F1300GSG-S (*1)HC-F1350GSG-S (*1)HC-F1400GSG-S (*1)HC-F1450GSG-S (*1)HC-F1500GSG-S (*1)HC-F1600GSG-S (*1)HC-F1700GSG-S (*1)HC-F1800GSG-S (*1)HC-F1900GSG-S (*1)HC-F2000GSG-S (*1)

300 - 300301 - 350300 - 400401 - 450451 - 500501 - 550551 - 600601 - 650651 - 700701 - 750751 - 800801 - 850851 - 900901 - 950

951 - 1,0001,001 - 1,0501,051 - 1,1001,101 - 1,1501,151 - 1,2001,201 - 1,2501,251 - 1,3001,301 - 1,3501,351 - 1,4001,401 - 1,4501,451 - 1,5001,501 - 1,6001,601 - 1,7001,701 - 1,8001,801 - 1,9001,901 - 2,000

■ HC-F_GSG-S

Model COPHeight [C] ExtubationspaceWidth [B]Length [A]

Overall Dimension (mm)

Specifications Dimensional Data

Model: HCF_GXG-S HCF_GXG-SIT

Model: HCF_GSG-S HCF_GSG-SIT

Constant Speed

Inverter-controlled

Model

■ Starter Panel (Open star-delta)

300 ～ 400450 ～ 500550 ～ 800850 ～ 900950 ～ 1250

Length800800

1,0001,0001,500

Width600750800800

1,000

Height2,1001,7001,9002,2002,100

Dimensions (mm)

GSG-S

Model

■ Inverter PanelDimensions (mm)

GSG-SIT

300～400450～600650～800850～1250

Length1,9001,9002,1002,200

Width950950950950

Height1,9002,3002,3002,450

Compressor, Main motor, Lubrication system, Heat exchanger

Safety device, Control panel, Standard accessories (Corrugated rubber vibration insulator plates, Oil strainer elements, Gasket for oil strainer elements, Dryer), Starter (optional)

Chiller main unit: Anti-corrosive prime coatingControl panel: Finish coat (color: Munsell 5Y8/1 gloss)Starter (optional): Finish coat (color: Munsell 5Y7/1 semigloss)

Foundation work, Carrying-in, Installation, Piping work, Cold insulation, Primary and secondary side electrical wiring, Commissioning for total system, Forced ventilation system, Outdoor discharge piping for safety valve, Counter flange, Bolt, Nut, Gasket, Foundationbolt, Refrigerant

*1. Power sourse: High /Middle tension Standard starting method: Reactor

iLength（A）

ab

cd

e f g h

Width（B）

Hei

ght（

C）

Cooling water outletChilled water outlet

Cooling water inletChilled water inletControl panel

CompressorMain motor

EconomizerMotor terminal boxCondenser

Evaporator Safety valve for evaporator

Safety valve for condenser

Side B Side A

Cooling CapacityUSRT

Cooling CapacityUSRT kg

Operating Weightkg

Shipping Weight

kgOperating Weight

kgShipping Weight

CentrifugalChiller High EfficiencyGFG-S/SIT Series

GXG-S/SIT SeriesGSG-S/SIT Series

G700DLV

Printed in Japan (H) MR-E070P Mar. 2017

http://www.jci-hitachi.com