ACCOMMODATIONS

Bachelor & Family Accommodations are available on first come first serve basis at IST, Islamabad. The charges for single room are Rs. 500/- per night. Please book your room at earliest, if you have to avail the accommodation.

Center for Vibration Analysis and Condition Monitoring (CVCM)

P.O. Box 2750, Islamabad

Ph: 051-9075521

Fax: 051-9273310

Registration Fees & Schedule:

Course Program

Course Registration Fee

Course fee Includes:

Rs.12,000/- per Participant

Course Material

Workshop Demonstrations

Lunch and Tea

Student Discount

Discount on Group

20%

30 %

(for min. 05 participants)

Course Venue: IST, Islamabad Highway, Near Rawat.

Kindly send soft or hard copy of form to the e-mails given below: or to CVCM postal address: P.O. Box 2750, Islamabad

Please note that registration is required two weeks prior to the course commencement.

NameJob TitleOffice AddressCell #Fax #E-MailSignature

Contact for more information

S. Zafar Kazmi: 0300-8561060

Email:szafar_kazmi@yahoo.com

Ghulam Mustafa: 0300-5199075

Email: mustafa786@hotmail.com

Training Courseon

Vibration Analysis Level-II April 27-30, 2015

Islamabad

Organized by Center for Vibration

Analysis and Condition Monitoring

Institute of Space Technology, Islamabad

Fault Analysis Vibration due to resonance Vibration due to unbalance Bent shaft problems Identifying a shaft with a kink or bend close to the

bearing Identifying a simple shaft bow Detection of Misalignment Vibration due to eccentricity Looseness and sub harmonic frequencies Looseness of the rotating system Looseness of the supporting system Defective rolling-element bearings Aerodynamic hydraulic problems Vibration due to induction motor problems Vibration due to gear problemsDay 3E quipment Testing and Diagnostics Impact testing (bump tests) Phase analysisCorrective action General Maintenance Repair Activities Review of Balancing Process Review of Shaft Alignment ProcedureRunning a successful CM program Setting Baseline Report Generation

Day 4

Practical Hand’s on Training

Certificate Distribution

Course Deliverables

Course Manual VA-IINotepadVibration Analysis Chart Workshop ExperienceVA-II participation Certificate

ABOUT CVCM

Centre for Vibration & Machine Condition Monitoring (CVCM) has recently been established at IST with the following objectives:

CVCM will provide machinery health monitoring services to the industries of Pakistan. Services include:

Infrared Thermography, Vibration AnalysisLaser Alignment and Dynamic BalancingOrganize Certification Condition Monitoring trainings, workshops and conferencesAcoustic & Vibration Control Shock& Vibration Testing

COURSE OBJECTIVES This course is designed for Maintenance and Design Engineers who want to apply modern vibration analysis techniques and principles for early fault detection and damage prevention in critical costly industrial machines. VA-II as an Advanced CourseVA-II course would enable the participants to sit for the VA level-II international certification exam. VA-II builds upon the foundation of the ISO 18436.2 Cat-2 Standard course. The course covers advanced techniques of data acquisition and signal processing, waveform analysis, spectral diagnostics, phase analysis, single-channel impact testing and field balancing. The VA-II course will help the plant maintenance engineers in selecting an optimized vibration monitoring program in their plants. LEARNING OUTCOMES 1. Select appropriate machinery vibration techniques 2. Perform vibration analysis on typical machines 3. Learn modern diagnostic techniques4. Perform resonance testing 5. Interpret results, make corrective recommendations

COURSE PROGRAMME

Day 1Review of maintenance practices Maintenance philosophies Evolution of maintenance philosophies Plant machinery classification and

recommendations Predictive maintenance techniques Vibration analysis – A key predictive maintenance

techniqueVibration basics and principles Benefits of vibration analysis Displacement, velocity, acceleration Orbits; Beats; Modulation Vibration Analysis Techniques Spectrum analysis Harmonics, sidebands, and the analysis

methodology Time waveform analysis (introduction) Orbit analysis (introduction) Phase analysis: bubble diagrams and ODS Enveloping (demodulation), shock pulse, spike

energy, Peak Value

Day 2Data Acquisition Principles Analog to Digital Converters Accelerometers Mounting Frequency range SensitivitySignal Processing Frequency filtering Fast Fourier Transform (FFT) Sampling rate Lines of resolution, F-max, Bandwidth Window Functions Averaging Overlap Display/Storage