cenit fixture fluorescent t5 &t8 high bay lighting · 2014. 6. 5. · fluorescent t5 &t8...
TRANSCRIPT
CENIT FIXTURE Fluorescent T5 &T8 High Bay
Lighting
CENIT Fluorescent T5 &T8 High Bay Lighting
2
SALES TOOL PRESENTATION
• Features with Benefits
• Manufacturing facility
• Cenit Series specification sheet
• Options and installations info
• Cenit F32T8 and F54HO offerings
• Cenit F54T5HO info, layouts and ROI
• Very low profile • Only 2.4” deep/ Lightweight for easy
installation.
• Mounting Options • Can be surface or pendant mounted.
• Pre-wired for multi level switching • Provides for 2 levels of lighting
• Anticorrosive treated steel housing finished with
electrostatic powder coating after fabrication
• No sharp edges with anti rust capabilities
• Anodized aluminum reflector designed specifically
for each available lamp configuration
• Highly reflective surface yielding very high
fixture efficiencies
• Side mounted ballasts • Allows ballast to maintain a lower ambient
temperature
• SLI manufacturing facility builds every fixture • Complete control and adaptability over all
aspects of manufacturing
• Quality Control • Each fixture is lamped and energized in factory
• Energy efficient • Reduces operation costs with a superior quality
of light
• Availability • Most common configurations are in stock
• Several Options • Available with cable mounting kits, wireguards,
6 ft. cords, emergency ballast, door frames with
clear lens, and occupancy sensors
3
CENIT Fluorescent T5 &T8 High Bay Lighting
Fixtures Plant in Costa Rica
4
ISO 9001-2000 & ISO 14001
Ballast Access
Access to ballast removing side reflector sections
• Overheat test
• Ballast always well below 90°C limit
• Heat emitted by lamps doesn’t rise towards ballasts
Thermal impact of ballast location
0 20 40 60 80 100 120
Ambient Temp C/F°
Component Temp on Cenit 6x54w
4x54w Ballast
2x54w Ballast
Lamp (center)
120/
248
40/
104
100/
212
20/68
40/
104
60/
140
80/
176
100/
212
120/
248
80/
176
60/
140
Co
mp
on
ent
Tem
p C
/F°
•Not recommended for applications with ambient temperature above 35°C (95°F) due to lamp output reduction
Installation
• Can be surface or pendant mounted
• Hanging kit must be attached to at least two points on the ceiling
Labels on fixture body & cable kit
• UL required labels and hanging cable kit installation
•Stop sleeve on all four hanging kit cables. Must pass through this hole and slide inward.
•Surface mount holes.
Installation Instructions
• 3D model view from below - guard attached
Wireguard (currenty being developed)
11
Cenit T5 & T8 High Bay
• T5 High Output Fluorescent Lamp• T8 Fluorescent Lamp• 3 Fixture sizes
• 14” wide• 25” wide• 33” wide
• 2, 3, 4, 6, 8 x 32W or 54W• Pendant or surface• Supplied with SLI Lighting ballast
• 4 lamps 1 ballast• 6 lamps 2 ballasts• 8 lamps 2 ballasts
• Universal voltage (standard)
• 49% of the luminous energy is concentrated between the 0° and the 20°
Reflector performance
•49%
•34%
•15%
•2%
•Applications:
•Warehouses, indoor sport facilities, industrial manufacturing facilities and commercial applications where high efficiency is necessary. Recommended installation height is no less than 5m (15 feet) for 6x54W model.
• Example of incorrect application of high bay fixture for low bay site
Reflector performance
•49%
•34%
•15%
•2%
Advantages• High efficiency (energy savings and photometricaly efficient).
• High CRI, instant restart, and double circuit for energy saving.
• Less weight on structures, less heat emission.
• Return on Investment (ROI) advantage.
Top view of warehouse. Illumination simulation by
Marketing’s Projects Dept.
6 Cenit 4x54w T5HO
5 MH 400w
5 Cenit 6x54w T5HO
1,182 watts/21 FC avg.
2,485 watts/19FC avg.
1,550 watts/30FC avg.
Cenit T5 High Bay Retrofit
14
5 10 15 20
Life in thousands of hours
10
20
30
0
Tho
usan
ds o
f em
itted
lum
ens
Cenit 6x54W T5HO
Metal Halide 400W
Comparison of luminous maintenance and energy savings for a 6 Lamp Fixture
310W
475W
Replacement Costs
(Replace 1–400W MH HID
with 1-6 lamp T5HO High
Bay fixture)
$185 installed & lamped
165 watts/fixture of energy
savings
Over 50% increase in
lighting levels
Return on Investment
(ROI) = 20 months
Cenit T5 High Bay Retrofit
15