CEMENT BOARD MD FINISH SYSTEM™ An Exterior Finish System Applied Over Exterior Cement Board With A Water-Resistive Barrier And Moisture Drainage

Cement Board MD Finish System Installation Details

DS190

Outside Corner

Vertical Control/Expansion Joint

Soffit/Fascia Termination

Parapet/Wall IntersectionTermination at Sloped Roof

Vent Penetration

Railing Attachment

Storefront Window Sill/Jamb

Flanged Window HeadFlanged Window Sill/Jamb

Expansion Joint at Floor Line

Termination at Foundation

Storefront Window Head

Termination at Deck

DETAIL

CBMD 0.0.13

CBMD 0.0.15

CBMD 0.0.14

CBMD 0.0.07

CBMD 0.0.08

CBMD 0.0.11

CBMD 0.0.12

CBMD 0.0.10

CBMD 0.0.05CBMD 0.0.06

CBMD 0.0.09

CBMD 0.0.03

PAGE CBMD 0.0.01

CBMD 0.0.02

CBMD 0.0.04

DRYVIT MAKES NO REPRESENTATION REGARDINGCONFORMITY OF ITS SUGGESTIONS TO MODELBUILDING CODES, ENGINEERING CRITERIA, SPECIFICAPPLICATIONS OR PROJECT LOCATIONS. ALLCOMPONENTS INDICATED IN ILLUSTRATIONS, ASWELL AS OTHERS THAT MAY BE REQUIRED FORTHE INTEGRITY OF THE SYSTEM SHALL BEDESIGNED, DETAILED AND ENGINEERED BYREPRESENTATIVES OF THE ARCHITECT, OWNER ORCONTRACTOR TO BE IN CONFORMANCE WITH MODELCODES, ARCHITECTURAL AND ENGINEERINGREQUIREMENTS PERTAINING TO SPECIFIC BUILDINGPROJECTS.

DRYVIT MAKES NO WARRANTY, EXPRESSED ORIMPLIED, AS TO THE ARCHITECTURAL DESIGN,ENGINEERING, OR WORKMANSHIP OF PROJECTSUTILIZING DRYVIT SYSTEMS OR PRODUCTS.

THE LIABILITIES OF DRYVIT SHALL BE AS STATEDIN THE DRYVIT STANDARD WARRANTY. CONTACTDRYVIT FOR A FULL AND COMPLETE COPY OF THISWARRANTY.

NOTE

Opening Preparation forStorefront Window

System Layout

Parapet Termination

EPS Shape Attachment

CBMD 0.0.16

CBMD 0.0.18

CBMD 0.0.17

Table of Contents

Table Of ContentsCement Board MD Finish System™

©

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

Dryvit Systems, Inc.Issued: 10/2016

1:

CBMD 0.0.01

SHEET TYPE WATER-RESISTIVEMEMBRANES SHALL BE INSTALLED IN AWEATHER BOARD FASHION

2: DRYVIT GRID TAPE NOT REQUIREDWHEN SHEET TYPE WATER-RESISTIVE BARRIERS ARE SPECIFIED

System Layout

™

NOTE:

3: DRYVIT AQUAFLASH® SYSTEM MAY BEUSED IN LIEU OF DRYVIT FLASHING TAPEWHEN DRYVIT BACKSTOP NT IS USED ASTHE WATER-RESISTIVE BARRIER

Cement Board MD Finish System™

™

®, ® ®

™

® ™

®

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

Dryvit Systems, Inc.©Issued: 10/2016

1:

CBMD 0.0.02

SHEET TYPE WATER-RESISTIVEMEMBRANES SHALL BE INSTALLED IN AWEATHER BOARD FASHION

2: DRYVIT AQUAFLASH® SYSTEMMAY BE USED IN LIEU OF DRYVITFLASHING TAPE WHEN DRYVITBACKSTOP NT IS USED AS THEWATER-RESISTIVE BARRIER

Termination at FoundationNOTE:

Cement Board MD Finish System™

™

®, ®®

™

® ™

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

Dryvit Systems, Inc.©Issued: 10/2016

1:

CBMD 0.0.03

SHEET TYPE WATER-RESISTIVEMEMBRANES SHALL BE INSTALLED IN AWEATHER BOARD FASHION

2: DRYVIT AQUAFLASH® SYSTEMMAY BE USED IN LIEU OF DRYVITFLASHING TAPE WHEN DRYVITBACKSTOP NT IS USED AS THEWATER-RESISTIVE BARRIER

Expansion Joint at Floor LineNOTE:

Cement Board MD Finish System™

™

®, ®®

™

® ™

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

Dryvit Systems, Inc.©Issued: 10/2016

NOTE:

CBMD 0.0.04

® ™ ™

FLASHING TAPE SHALL EXTEND TOINSIDE FACE OF FRAMING

Opening Preparation forStorefront Window

2: SHEET TYPE WATER RESISTIVEMEMBRANES SHALL BE INSTALLED IN AWEATHER BOARD FASHION

3: DRYVIT AQUAFLASH® SYSTEM MAY BEUSED IN LIEU OF DRYVIT FLASHING TAPEWHEN DRYVIT BACKSTOP NT IS USED ASTHE WATER-RESISTIVE BARRIER

1:

Cement Board MD Finish System™The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

Dryvit Systems, Inc.©Issued: 10/2016

CBMD 0.0.05

Storefront Window Sill/Jamb

1: SHEET TYPE WATER-RESISTIVEMEMBRANES SHALL BE INSTALLED IN AWEATHER BOARD FASHION

2: DRYVIT AQUAFLASH® SYSTEMMAY BE USED IN LIEU OF DRYVITFLASHING TAPE WHEN DRYVITBACKSTOP NT IS USED AS THEWATER-RESISTIVE BARRIER

NOTE:

Cement Board MD Finish System™

™

™

® ™

®, ®®

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

Dryvit Systems, Inc.©Issued: 10/2016

1:

CBMD 0.0.06

SHEET TYPE WATER-RESISTIVEMEMBRANES SHALL BE INSTALLED IN AWEATHER BOARD FASHION

2: DRYVIT AQUAFLASH® SYSTEMMAY BE USED IN LIEU OF DRYVITFLASHING TAPE WHEN DRYVITBACKSTOP NT IS USED AS THEWATER-RESISTIVE BARRIER

Storefront Window HeadNOTE:

Cement Board MD Finish System™

™

®,® ®

™

® ™

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

Dryvit Systems, Inc.©Issued: 10/2016

CBMD 0.0.07

Flanged Window Sill/Jamb

1: SHEET TYPE WATER-RESISTIVEMEMBRANES SHALL BE INSTALLED IN AWEATHER BOARD FASHION

2: DRYVIT AQUAFLASH® SYSTEMMAY BE USED IN LIEU OF DRYVITFLASHING TAPE WHEN DRYVITBACKSTOP NT IS USED AS THEWATER-RESISTIVE BARRIER

NOTE:

Cement Board MD Finish System™

™

®, ®®

™

™

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

Dryvit Systems, Inc.©Issued: 10/2016

1:

CBMD 0.0.08

SHEET TYPE WATER-RESISTIVEMEMBRANES SHALL BE INSTALLED IN AWEATHER BOARD FASHION

2: DRYVIT AQUAFLASH® SYSTEMMAY BE USED IN LIEU OF DRYVITFLASHING TAPE WHEN DRYVITBACKSTOP NT IS USED AS THEWATER-RESISTIVE BARRIER

Flanged Window HeadNOTE:

Cement Board MD Finish System™

®, ®®

™

® ™

™

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

Dryvit Systems, Inc.©Issued: 10/2016

1:

CBMD 0.0.09

SHEET TYPE WATER-RESISTIVEMEMBRANES SHALL BE INSTALLED IN AWEATHER BOARD FASHION

Railing AttachmentNOTE:

2: DRYVIT AQUAFLASH® SYSTEMMAY BE USED IN LIEU OF DRYVITFLASHING TAPE WHEN DRYVITBACKSTOP NT IS USED AS THEWATER-RESISTIVE BARRIER

Cement Board MD Finish System™

™

®, ®®

® ™

™

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

Dryvit Systems, Inc.©Issued: 10/2016

1:

CBMD 0.0.10

SHEET TYPE WATER-RESISTIVEMEMBRANES SHALL BE INSTALLED IN AWEATHER BOARD FASHION

2: DRYVIT AQUAFLASH® SYSTEMMAY BE USED IN LIEU OF DRYVITFLASHING TAPE WHEN DRYVITBACKSTOP NT IS USED AS THEWATER-RESISTIVE BARRIER

Vent PenetrationNOTE:

Cement Board MD Finish System™

™

®, ®®

™

® ™

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

Dryvit Systems, Inc.©Issued: 10/2016

1:

CBMD 0.0.11

SHEET TYPE WATER-RESISTIVEMEMBRANES SHALL BE INSTALLED IN AWEATHER BOARD FASHION

2: TERMINATE SYSTEM MIN. 2" (50 MM)OFF ROOF

Termination at Sloped RoofNOTE:

3: DRYVIT AQUAFLASH® SYSTEM MAY BEUSED IN LIEU OF DRYVIT FLASHING TAPEWHEN DRYVIT BACKSTOP NT IS USED ASTHE WATER-RESISTIVE BARRIER

Cement Board MD Finish System™

™

®, ®®

™

® ™

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

Dryvit Systems, Inc.©Issued: 10/2016

1:

CBMD 0.0.12

SHEET TYPE WATER-RESISTIVEMEMBRANES SHALL BE INSTALLED IN AWEATHER BOARD FASHION

2: DRYVIT AQUAFLASH® SYSTEMMAY BE USED IN LIEU OF DRYVITFLASHING TAPE WHEN DRYVITBACKSTOP NT IS USED AS THEWATER-RESISTIVE BARRIER

Parapet Wall IntersectionNOTE:

Cement Board MD Finish System™

® ® ®

™

® ™

™

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

Dryvit Systems, Inc.©Issued: 10/2016

1:

CBMD 0.0.13

SHEET TYPE WATER-RESISTIVEMEMBRANES SHALL BE INSTALLED IN AWEATHER BOARD FASHION

2: DRYVIT AQUAFLASH® SYSTEMMAY BE USED IN LIEU OF DRYVITFLASHING TAPE WHEN DRYVITBACKSTOP NT IS USED AS THEWATER-RESISTIVE BARRIER

Parapet TerminationNOTE:

Cement Board MD Finish System™

™

™

®, ®®

® ™

,

® ™

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

Dryvit Systems, Inc.©Issued: 10/2016

1:

CBMD 0.0.14

SHEET TYPE WATER-RESISTIVEMEMBRANES SHALL BE INSTALLED IN AWEATHER BOARD FASHION

2: DRYVIT AQUAFLASH® SYSTEMMAY BE USED IN LIEU OF DRYVITFLASHING TAPE WHEN DRYVITBACKSTOP NT IS USED AS THEWATER-RESISTIVE BARRIER

Termination at DeckNOTE:

Cement Board MD Finish System™

®, ®®

™

® ™

™

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

Dryvit Systems, Inc.©Issued: 10/2016

1:

CBMD 0.0.15

SHEET TYPE WATER-RESISTIVEMEMBRANES SHALL BE INSTALLED IN AWEATHER BOARD FASHION

Soffit/Fascia TerminationNOTE:

Cement Board MD Finish System™

®, ®®

® ™

™

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

Dryvit Systems, Inc.©Issued: 10/2016

® ™

™

1:

CBMD 0.0.16

SHEET TYPE WATER-RESISTIVEMEMBRANES SHALL BE INSTALLED IN AWEATHER BOARD FASHION

2: DRYVIT AQUAFLASH® SYSTEMMAY BE USED IN LIEU OF DRYVITFLASHING TAPE WHEN DRYVITBACKSTOP NT IS USED AS THEWATER-RESISTIVE BARRIER

Vertical Control/Expansion JointNOTE:

Cement Board MD Finish System™

®, ®®

™

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

Dryvit Systems, Inc.©Issued: 10/2016

1:

CBMD 0.0.17

SHEET TYPE WATER-RESISTIVEMEMBRANES SHALL BE INSTALLED IN AWEATHER BOARD FASHION

2: DO NOT LAP REINFORCING MESHWITHIN 8" (200 MM) OF OUTSIDECORNERS

Outside CornerNOTE:

Cement Board MD Finish System™

® ™

™

®, ®®

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

Dryvit Systems, Inc.©Issued: 10/2016

1:

CBMD 0.0.18

SHEET TYPE WATER-RESISTIVEMEMBRANES SHALL BE INSTALLED IN AWEATHER BOARD FASHION

EPS Shape AttachmentNOTE:

Cement Board MD Finish System™

®, ®®

® ™

™

,

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

Dryvit Systems, Inc.©Issued: 10/2016