cedar doghouse

33
Cedar Cottage Doghouse Plans Overlapping cedar shingles add an element of charm to this medium size doghouse. The walls, floor, and trim are constructed of solid cedar, making it naturally weather resistant and provides excellent insulation. An added benefit of cedar is that it is a natural insect repellent. It also features an easy lift off roof for easy cleaning. Height (Including Roof) ......................................................................................... 32 1 /2Width (Including Roof) .......................................................................................... 26 1 /2Depth (Including Roof) .......................................................................................... 29” Height (House Only) ............................................................................................. 30” Width (Including Roof) .......................................................................................... 22 1 /2Depth (Including Roof) .......................................................................................... 25” Copyright © 2010 by Robert E. Reedy, Vandalia, Ohio, USA All Rights Reserved. This document may not be reproduced in any form without the written consent of the author.

Upload: danichatterley

Post on 15-Nov-2015

232 views

Category:

Documents


1 download

DESCRIPTION

Cedar Doghouse

TRANSCRIPT

  • Cedar Cottage Doghouse Plans

    Overlapping cedar shingles add an element of charm to this medium size doghouse. The walls, floor, and trim are constructed of solid cedar, making it naturally weather resistant and provides excellent insulation. An added benefit of cedar is that it is a natural insect repellent. It also features an easy lift off roof for easy cleaning.

    Height (Including Roof) ......................................................................................... 32 1/2Width (Including Roof) .......................................................................................... 26 1/2Depth (Including Roof) .......................................................................................... 29Height (House Only) ............................................................................................. 30Width (Including Roof) .......................................................................................... 22 1/2Depth (Including Roof) .......................................................................................... 25

    Copyright 2010 by Robert E. Reedy, Vandalia, Ohio, USA

    All Rights Reserved. This document may not be reproduced in any form without the written consent of the author.

  • Cedar Cottage Doghouse PlansTable of Contents

    Materials List ............................................................................................................... 1

    Floor & Wall Parts Drawings ............................................................................ 2Trim Parts Drawings ....................................................................................... 3Gable Parts Drawings ..................................................................................... 4Roof Parts Drawings ....................................................................................... 5Drill the Screw Holes ...................................................................................... 6Making the Shingles ....................................................................................... 7Cutting the Spline Kerfs ................................................................................... 8Rounding Over the Edges ............................................................................... 9Top Door Trim Patterns ................................................................................... 10Assemble Floor .............................................................................................. 11Assemble Back .............................................................................................. 12Assemble Sides ............................................................................................. 13Assemble Front ............................................................................................. 14Door Opening Cutout ...................................................................................... 15Attach Door Trim ............................................................................................ 16Attach Front & Back to the Floor ....................................................................... 17Attach Sides .................................................................................................. 18Attach Front & Rear Trim ................................................................................. 19Assemble Gables ........................................................................................... 20Attach Shingles .............................................................................................. 21Attach Rafters ................................................................................................ 22Attach Gables ................................................................................................ 23Attach Roof Filler Strip .................................................................................... 24Attach Roof Caps ........................................................................................... 25Attach Roof Trim ............................................................................................ 26Attach Roof Guides ........................................................................................ 27Set the Roof in Place ...................................................................................... 28Cutout Drawings ............................................................................................ 29

    Copyright 2010 by Robert E. Reedy, Vandalia, Ohio, USAAll Rights Reserved. This document may not be reproduced in any form without the written consent of the author.

  • Cedar Cottage Doghouse PlansMaterials List

    Page 1

    Wood PartsExcept for the floor boards, all wood is 3/4 thick unless otherwise noted.

    If your wood is thicker, use your table saw to cut it to the proper thickness before assembly.

    Qty Item Name Size Material

    14 24 Siding Boards 24 x 2 1/4 Cedar

    9 21 Siding Boards 21 x 2 1/4 Cedar

    10 5 Siding Boards 5 x 2 1/4 Cedar

    1 Center Floor Board 22 1/2 x 7 Cedar

    2 Side Floor Boards 22 1/2x 7 Cedar

    2 19 Floor Support 19 x 1 1/2 Cedar

    4 9 3/8 Floor Support 9 3/8 x 1 1/2 Cedar

    10 Wall Stud 15 3/4 x 1 Cedar

    2 Bottom Trim 19 1/2 x 2 1/4 Cedar

    4 Side Trim 18 3/4 x 1 1/2 Cedar

    4 Gable Trim 16 x 1 1/2 Cedar

    4 Legs 3 x 1 1/2 Cedar

    2 Door Side Trim 11 1/4 x 1 x 1/2 Cedar

    1 Door Top Trim 12 x 2 1/4x 1/2 Cedar

    4 Roof Trim 18 5/8 x 1 1/2 x 1/2 Cedar

    2 Top Gable Board 4 1/2 x 2 1/4 Cedar

    2 2nd Gable Board 9 x 2 1/4 Cedar

    2 3rd Gable Board 13 1/2 x 2 1/4 Cedar

    2 4th Gable Board 18 x 2 1/4 Cedar

    2 Bottom Gable Board 22 1/2x 2 1/4 Cedar

    36 Full Shingles 7 x 4 1/4 Cedar

    8 Half Shingles 3 1/2 x 4 1/4 Cedar

    6 Long Shingle Spline 4 1/4 x 3/4 x 1/8 Any Wood

    28 Short Shingle Spline 3 1/4 x 3/4 x 1/8 Any Wood

    1 Roof Filler Strip 28 x 1 x 1 Any Wood

    1 Underlap Roof Cap 28 x 2 x 3/8 Cedar

    1 Overlap Roof Cap 28 x 2 3/8 x 3/8 Cedar

    4 Rafters 16 x 1 Any Wood

    4 Roof Guide 4 1/2 x 2 Any Wood

    2 Sub Roof 28 x 1/2 Exterior Plywood

    Copyright 2010 by Robert E. Reedy, Vandalia, Ohio, USAAll Rights Reserved. This document may not be reproduced in any form without the written consent of the author.

  • Cedar Cottage Doghouse PlansMaterials List

    Page 1a

    Hardware Required

    Qty Item Name Size Material

    Finishing Nails 1 1/2

    Finishing Nails 1 1/4

    Finishing Nails 1

    132 Roofing Nails 7/8

    8 Wood Screws 2 Flat Head or Round Head

    20 Wood Screws 1 1/2 Flat Head or Round Head

    4 Wood Screws 1 1/4 Flat Head or Round Head

    3 Tee Nuts 1/4 - 24 TPI

    3 Carriage Bolts 2 x 1/4 - 24 TPI

    3 Hex Head Bolts 1 1/2 x 1/4 - 24 TPI

    3 Nuts 1/4 - 24 TPI

    3 Flat Washers 1/4

    Copyright 2010 by Robert E. Reedy, Vandalia, Ohio, USAAll Rights Reserved. This document may not be reproduced in any form without the written consent of the author.

  • Wall Stud (10 Required)

    Door Edge (2 Required)

    21" Siding (9 Required)

    Side Floor Board(2 Required)

    5" Siding(10 Required)

    Center Floor Board (1 Required)

    (Door Edge is 3/4" wide by 1/2" thick.)

    9 3/8" Floor Support (4 Required)

    (c) Copyright 2010 by Robert E. Reedy, Vandalia, Ohio, USAAll Rights Reserved. This document may not be reproduced in any form without the written consent of the author.

    Cedar Cottage Doghouse PlansFloor & Wall Parts Drawings

    Page 2

    24"

    21"

    2 1/4"

    2 1/4"

    5"

    9 3/8"

    1 1/2"

    11 1/4"

    3/4"

    15 3/4"

    1"

    1 1/2"

    19"

    19" F

    loor S

    upp o

    rt (2

    Req

    uired

    )

    22 1/2"

    7"

    22 1/2"

    6"

    7"

    1 1/2" 3/4"

    9 3/8" 9 3/8"

    1"

    2 1/4"

    24" Siding (14 Required)

  • (c) Copyright 2010 by Robert E. Reedy, Vandalia, Ohio, USAAll Rights Reserved. This document may not be reproduced in any form without the written consent of the author.

    Cedar Cottage Doghouse PlansTrim Parts Drawings

    Page 3

    Bottom Trim (2 Required)

    Gable Trim (4 Required)

    Side Trim (4 Required)

    3" Legs (4 Required)

    Door side and top trim parts are 1/2" thick.A full size pattern is provided for the Door Top Trim.

    Roof Trim (4 Required)

    Roof Trim is 1/2" thick.

    Door Top Trim (1 Required)

    Door Side Trim (2 Required)

    16"1 1/2"

    18 3/4" 1 1/2"

    19 1/2" 2 1/4"

    3"1 1/2"

    12"2 1/4"

    11 1/4"1"

    18 5/8"1 1/2"

    (Set your saw to 22 1/2 to make the 67 1/2 cuts.)

  • (c) Copyright 2010 by Robert E. Reedy, Vandalia, Ohio, USAAll Rights Reserved. This document may not be reproduced in any form without the written consent of the author.

    Cedar Cottage Doghouse PlansGable Parts Drawings

    Page 4

    Top Gable Board (2 Required)

    Bottom Gable Board (2 Required)

    4th Gable Board (2 Required)

    2nd Gable Board (2 Required)

    3rd Gable Board (2 Required)

    4 1/2" 2 1/4"

    9"

    13 1/2"

    18"

    22 1/2"

    2 1/4"

    2 1/4"

    2 1/4"

    2 1/4"

  • (c) Copyright 2010 by Robert E. Reedy, Vandalia, Ohio, USAAll Rights Reserved. This document may not be reproduced in any form without the written consent of the author.

    Cedar Cottage Doghouse PlansRoof Parts Drawings

    Page 5

    Full Shingle(36 Required)

    Half Shingle(8 Required)

    Sub Roof (2 Required)

    Sub Roof is made of 1/2" thick material.

    Roof Filler Strip (1 Required)

    Roof Filler Strip is made of 1" thick material.

    Rafter (4 Required)

    Roof Guide (4 Required)

    Overlap Roof Cap (1 Required)

    Underlap Roof Cap (1 Required)

    Long Spline(6 Required)

    Roof Cap is 3/8" thick.

    Roof Cap is 3/8" thick.

    28"

    16"

    4 1/4"

    4 1/4"

    28" 1"

    2"

    2 3/8"

    2"4 1/2"

    1 1/2"16"

    28"

    3 1/4"

    3/4"

    3/4"

    4 1/4"

    7"

    3 1/2"

    28" Short Spline(28 Required)

    Splines are 1/8" thick.

  • (c) Copyright 2010 by Robert E. Reedy, Vandalia, Ohio, USAAll Rights Reserved. This document may not be reproduced in any form without the written consent of the author.

    Cedar Cottage Doghouse PlansDrill the Screw Holes

    Page 6

    Drill three 5/16" diameter holes in one of the 21" siding boards as shown above. These holes will be for Tee Nuts.

    Drill two 3/16" diameter holes through the narrow edge of each rafter as shown above.

    19" Floor Supports

    Drill three 1/4" diameter holes in each of the 19" floor supports as shown above.

    RaftersDrill two 3/16" diameter holes through the wide edge of the rafters as shown above.

    Front Bottom Siding Board

    Rafters

    1 1/2" 1 1/2"8"

    Rear Bottom Siding Board

    Drill three 1/4" diameter holes in one of the 21" siding boards as shown above. These holes will be for 1/4" bolts.

    2 1/2"

    10 1/2"

    2 1/2"

    3/4"

    2 1/2"

    10 1/2"

    2 1/2"

    3/4"

    2" 2"2 1/2" 2 1/2"

    3rd Gable Board (Rear Only)2nd Gable Board (Rear Only)

    Drill several 3/8" diameter vent holes in the 2nd and 3rd rear gable boards as shown above. The gray shaded areas represent the 1 1/2" wide gable trim.

  • (c) Copyright 2010 by Robert E. Reedy, Vandalia, Ohio, USAAll Rights Reserved. This document may not be reproduced in any form without the written consent of the author.

    Cedar Cottage Doghouse PlansMaking the Shingles

    Page 7

    Step 3. Set your table saw angle to 5 and make the tapered cut 7/16" from the edge of each piece as shown by the gray shaded area above.

    Step 4. Set your table saw angle back to 90 and cut thirty-six shingles 7" wide and eight shingles 3 1/2" wide.

    Make the tapered cut on all shingles.

    Step 2. Make a 7/16" deep cut 1" from the edge of each piece to complete the overlap notch as shown by the gray shaded area above.

    After the

    cut

    (The eight bottom row shingles are 7" wide.)

    The overlap notch is not needed on the bottom rows of shingles. Set eight shingles aside for the botttom rows and do not make the first two cuts on them. (These are 7" wide shingles.)

    After the

    cut

    Grain Direction

    Step 1. Make a 1" deep cut 5/16" from the edge of each piece as shown by the gray shaded area above.

    To make the shingles, start by cutting forty-four 4 1/4" high pieces of wood from an 8" wide cedar board. (The actual width of the board will probably be between 7 1/4" and 7 1/2".)

    Use your table saw to cut the shingles into the final shape as shown below. We make these cuts before cutting the shingles to the correct width because it's easier to make the cuts on longer pieces.) You'll need thirty-six 7" wide shingles and eight 3 1/2" wide ones.

  • (c) Copyright 2010 by Robert E. Reedy, Vandalia, Ohio, USAAll Rights Reserved. This document may not be reproduced in any form without the written consent of the author.

    Cedar Cottage Doghouse PlansCutting the Spline Kerfs

    Page 8

    Full Shingle - Kerf on Right Side Full Shingle - Kerf on Left Side

    Half Shingle Kerf on Right Side Half Shingle Kerf on Left Side

    The splines are used between adjoining shingles to prevent leaks and for added strength.

    Cut the 3/8" by 1/8" spline kerfs as shown by the gray shaded areas in the drawings below. These kerfs are 3/16" from the bottom and parallel to the bottom.

    Full Shingle - Kerf on Both Sides

    The half shingles only used on the edges of the roof and therefore only require a single spline kerf.

    (Six of these) (Six of these)

    (Twenty-four of these)

    (Four of these) (Four of these)

  • (c) Copyright 2010 by Robert E. Reedy, Vandalia, Ohio, USAAll Rights Reserved. This document may not be reproduced in any form without the written consent of the author.

    Cedar Cottage Doghouse PlansRounding Over the Edges

    Page 9

    5" Siding(10 Required)

    21" Siding (9 Required)

    24" Siding (14 Required)

    Two pieces of the 5" siding need only one top edge rounded.

    Six pieces of the 21" siding need both front edges rounded.

    One piece of the 21" siding needs only one front edge rounded.

    Two pieces of the 21" siding need neither of the front edges rounded.

    Eight pieces of the 5" siding need both top edges rounded.

    End View

    End View

    Twelve pieces of the 24" siding need both front edges rounded.

    Two pieces of the 24" siding need only one front edge rounded.

    End View

    Round over the adjoining edges of the shigles with a 1/8" radius router bit.

  • (c) Copyright 2010 by Robert E. Reedy, Vandalia, Ohio, USAAll Rights Reserved. This document may not be reproduced in any form without the written consent of the author.

    Top Door Trim Patterns

    Cedar Cottage Dog House Plans

    Page 10

  • (c) Copyright 2010 by Robert E. Reedy, Vandalia, Ohio, USAAll Rights Reserved. This document may not be reproduced in any form without the written consent of the author.

    Cedar Cottage Doghouse PlansAssemble Floor

    Page 11

    (Keep nail clear of hole.)

    Apply glue and attach the 9 3/8" floor supports to the floor boards with 1 1/2" finishing nails.

    Assemble the floor boards and 19" floor supports as shown. Apply glue to mating surfaces between floor supports and floor boards. Secure with 1 1/2" finishing nails.

  • (c) Copyright 2010 by Robert E. Reedy, Vandalia, Ohio, USAAll Rights Reserved. This document may not be reproduced in any form without the written consent of the author.

    Cedar Cottage Doghouse PlansAssemble Back

    Page 12

    (Predrill nail holes in the wall studs with a 1/16" drill to keep the wall studs from splitting.)

    Position the wall studs flush with the ends of the siding boards.

    Position the wall studs flush with the ends of the siding boards.

    Bottom Board

    (Be sure the assembly is square as you work.)

    Rounded

    Edges

    Use 1 1/4" nails. 1 1/2" nails may protrude past the front surface of the siding boards.

    Apply glue to the surfaces of the wall studs and 21" siding boards where the wall studs contact the siding boards as shown. Secure with 1 1/4" finishing nails.

  • (c) Copyright 2010 by Robert E. Reedy, Vandalia, Ohio, USAAll Rights Reserved. This document may not be reproduced in any form without the written consent of the author.

    Cedar Cottage Doghouse PlansAssemble Sides

    Page 13

    (Predrill nail holes in the wall studs with a 1/16" drill to keep the wall studs from splitting.)

    Position the end wall studs 1 1/2" from ends of the siding boards.

    (Be sure the assembly is square as you work.)Bottom Board

    Rounded

    Edges

    11 5/8"

    1 1/2"

    1 1/2"Position the end wall studs 1 1/2" from ends of the siding boards.

    Apply glue to the surfaces of the wall studs and 24" siding boards where the wall studs contact the siding boards as shown. Secure with 1 1/4" finishing nails.

    Use 1 1/4" nails. 1 1/2" nails may protrude past the front surface of the siding boards.

  • (c) Copyright 2010 by Robert E. Reedy, Vandalia, Ohio, USAAll Rights Reserved. This document may not be reproduced in any form without the written consent of the author.

    Cedar Cottage Doghouse PlansAssemble Front

    Page 14

    Wall Stud5" Siding

    21" Siding

    Door Edge

    Bottom Board

    Rounded

    Edges

    (Be sure the assembly is square as you work.)

    Use 1 1/4" nails. 1 1/2" nails may protrude past the front surface of the siding boards.

    Arrange the 21" siding, 5" Siding, two wall studs, and the two door edges as shown. Apply glue to wall stud and door edge mating surfaces and secure the assembly with 1 1/4" finishing nails.

  • (c) Copyright 2010 by Robert E. Reedy, Vandalia, Ohio, USAAll Rights Reserved. This document may not be reproduced in any form without the written consent of the author.

    Cedar Cottage Doghouse PlansDoor Opening Cutout

    Page 15

    (When working with cedar, a metal cutting blade provides a smooth cut with minimun splintering.)

    Position the top door trim with the bottom inside corners lined up with the door opening as shown above. Make a pencil mark along the bottom curved edge of the door trim.

    Use your jig saw with a fine tooth blade and cut along the pencil mark as indicated by the dotted line above. Make the cut just barely to bottom of the pencil mark. You can sand it to match the top trim after the trim in attached.

  • (c) Copyright 2010 by Robert E. Reedy, Vandalia, Ohio, USAAll Rights Reserved. This document may not be reproduced in any form without the written consent of the author.

    Cedar Cottage Doghouse PlansAttach Door Trim

    Page 16

    Insert a Tee Nut into each of the floor mounting holes as shown above.

    Apply glue to the mating surfaces and attach the door trim pieces to the front with 1" finishing nails

  • (c) Copyright 2010 by Robert E. Reedy, Vandalia, Ohio, USAAll Rights Reserved. This document may not be reproduced in any form without the written consent of the author.

    Cedar Cottage Doghouse PlansAttach Front & Back to Floor

    Page 17

    Attach the front to the bottom with 1/4" by 1 1/2" hex head bolts and washers as shown avove.

    Attach the back to the bottom with 1/4" by 2" carriage bolts, nuts, and washers as shown below.

  • (c) Copyright 2010 by Robert E. Reedy, Vandalia, Ohio, USAAll Rights Reserved. This document may not be reproduced in any form without the written consent of the author.

    Cedar Cottage Doghouse PlansAttach Sides

    Page 18

    Position the sides in place and secure the corner studs with 1 1/2" wood screws as shown below.

  • (c) Copyright 2010 by Robert E. Reedy, Vandalia, Ohio, USAAll Rights Reserved. This document may not be reproduced in any form without the written consent of the author.

    Cedar Cottage Doghouse PlansAttacg Front & Rear Trim

    Page 19

    Top of trim is flush with top of sides.

    This piece of trim is flush with the top of the floor surface.

    Orient the trim pieces so two have the angles pointing one way and the other two point the opposite way as shown above. Apply glue to mating surfaces and attach the 3" legs to the front & rear trim pieces with 1 1/4" finishing nails.

    Apply glue the the mating surfaces and attach the front and rear trim with 1 1/4" finishing nails as shown above.

  • (c) Copyright 2010 by Robert E. Reedy, Vandalia, Ohio, USAAll Rights Reserved. This document may not be reproduced in any form without the written consent of the author.

    Cedar Cottage Doghouse PlansAssemble Front

    Page 20

    Apply glue to the mating surfaces and attach the gable boards to the gable trim with 1 1/4" finishing nails. Be sure the gable trim pieces remain square as you attach the boards.

    Assemble both gables in the same manner.

    In the next step, place the gable boards with the rounded over edges facing down. (The boards are nailed from the back side.)

    Position two gable trim pieces as shown below with the best looking side facing down. Be sure they form a 90 angle at the top.

  • (c) Copyright 2010 by Robert E. Reedy, Vandalia, Ohio, USAAll Rights Reserved. This document may not be reproduced in any form without the written consent of the author.

    Cedar Cottage Doghouse PlansAttach Shingles

    Page 21

    Shingles must be flush with the sub roof on top and side edges.

    After all shingles are in place, make a mark on the sub roof at the top edge of the bottom shingle. Draw a guide line for the bottom row of shingles using the mark as the distance from the bottom of the sub roof.

    Sub Floor

    Apply glue to the top and bottom surfaces and insert a spline between adjoining shingles.

    The bottom row uses full width shingles with no overlap notch.

    Attach the shingles to the other piece of sub roof in the same way.

    Position the shingles on the sub roof as shown below. The top edges of the top shingles should be flush with the top of the sub roof. (The bottom shingles will overlap the sub roof.)

    Predrill the nail holes through the shingles with a 1/8" bit.

    Apply a 1" wide coating of glue along the bottom of each shingle under the nail holes. Begin with the left bottom shingle and align the top of the shingle along the guide line. Secure the shingles with 7/8" roofing nails. The remaining rows of shingles will have the overlap notch covering the nails.

  • (c) Copyright 2010 by Robert E. Reedy, Vandalia, Ohio, USAAll Rights Reserved. This document may not be reproduced in any form without the written consent of the author.

    Cedar Cottage Doghouse PlansAttach Rafters

    Page 22

    The distance between the rafters must be the same as this measurment.

    Attach the rafters to the under side of the sub roof panels with 2" screws as shown below. The distance between the rafters must be the same as the distance between the inner surfaces of the front and back siding boards.

  • (c) Copyright 2010 by Robert E. Reedy, Vandalia, Ohio, USAAll Rights Reserved. This document may not be reproduced in any form without the written consent of the author.

    Cedar Cottage Doghouse PlansAttach Gables

    Page 23

    Attach the Gables to the rafters with 1 1/2" screws as shown below.

  • (c) Copyright 2010 by Robert E. Reedy, Vandalia, Ohio, USAAll Rights Reserved. This document may not be reproduced in any form without the written consent of the author.

    Cedar Cottage Doghouse PlansAttach Roof Filler Strip

    Page 24

    Predrill the nail holes, apply glue to mating surfaces and attach the roof filler to the top of the roof as shown below. 1 1/2" finishing nails would be a good choice.

  • (c) Copyright 2010 by Robert E. Reedy, Vandalia, Ohio, USAAll Rights Reserved. This document may not be reproduced in any form without the written consent of the author.

    Cedar Cottage Doghouse PlansAttach Roof Caps

    Page 25

    Predrill the nail holes, apply glue to mating surfaces and attach the Roof Caps to the top of the roof as shown below. 1" finishing nails would be good for this.

  • (c) Copyright 2010 by Robert E. Reedy, Vandalia, Ohio, USAAll Rights Reserved. This document may not be reproduced in any form without the written consent of the author.

    Cedar Cottage Doghouse PlansAttach Roof Trim

    Page 26

    Predrill the nail holes, apply glue to mating surfaces and attach the Roof Trim to the top of the roof with 1" finishing nails as shown below.

  • (c) Copyright 2010 by Robert E. Reedy, Vandalia, Ohio, USAAll Rights Reserved. This document may not be reproduced in any form without the written consent of the author.

    Cedar Cottage Doghouse PlansAttach Roof Guides

    Page 27

    Use 1 1/4" screws. 1 1/2" screws may protrude past the front surface of the siding boards.

    Attach the Roof Guides to the Gables with 1 1/4" screws as shown below.

  • (c) Copyright 2010 by Robert E. Reedy, Vandalia, Ohio, USAAll Rights Reserved. This document may not be reproduced in any form without the written consent of the author.

    Cedar Cottage Doghouse PlansSet the Roof in Place

    Page 28

    Set the assembled roof in place and your dog house is complete.

  • Cutout Drawings

    19" F

    loor S

    uppo

    rtSi

    de Fl

    oor B

    oard

    Cente

    r Floo

    r Boa

    rd (1

    Req

    uired

    )Si

    de Fl

    oor B

    oard

    19" F

    loor S

    uppo

    rt

    19" F

    loor S

    uppo

    rt

    3" Le

    gs

    3" Le

    gs

    3" Le

    gs

    3" Le

    gs

    19" F

    loor S

    uppo

    rt

    Roof

    Guide

    Roof

    Guide

    Roof

    Guide

    Roof

    Guide

    24" S

    iding

    24" S

    iding

    24" S

    iding

    24" S

    iding

    24" S

    iding

    24" S

    iding

    24" S

    iding

    24" S

    iding

    21" S

    iding

    21" S

    iding

    21" S

    iding

    Door

    Side

    Trim

    Gable

    Trim

    Door

    Edg

    e9 3

    /8" Fl

    oor S

    uppo

    rt

    9 3/8"

    Floo

    r Sup

    port

    9 3/8"

    Floo

    r Sup

    port

    9 3/8"

    Floo

    r Sup

    port

    Side

    Trim

    Side

    Trim

    Side

    Trim

    Side

    Trim

    Rafte

    r

    Rafte

    r

    Rafte

    r

    Wall

    Stud

    Wall

    Stud

    Wal

    l Stu

    dW

    all S

    tud

    Wall

    Stud

    Wall

    Stud

    Wal

    l Stu

    dW

    all S

    tud

    Door

    Side

    Trim

    Door

    Edg

    e

    Full Shingle

    Full Shingle

    Full Shingle

    Full Shingle

    Full Shingle

    Full Shingle

    Full Shingle

    Full Shingle

    Full Shingle

    Full Shingle

    Full Shingle

    Full Shingle

    Full Shingle

    Full Shingle

    Full Shingle

    Full Shingle

    Full Shingle

    Full Shingle

    1/2 Sh

    ingle

    1/2 Sh

    ingle

    1/2 Sh

    ingle

    1/2 Sh

    ingle

    1/2 Sh

    ingle

    1/2 Sh

    ingle

    24" S

    iding

    24" S

    iding

    24" S

    iding

    24" S

    iding

    24" S

    iding

    24" S

    iding

    21" S

    iding

    21" S

    iding

    21" S

    iding

    21" S

    iding

    21" S

    iding

    21" S

    iding

    1/2 Sh

    ingle

    1/2 Sh

    ingle

    Board

    Gable

    3rd

    Full Shingle

    Full Shingle

    Full Shingle

    Full Shingle

    Full Shingle

    Full Shingle

    Full Shingle

    Full Shingle

    Full Shingle

    Full Shingle

    Full Shingle

    Full Shingle

    Full Shingle

    Full Shingle

    Full Shingle

    Full Shingle

    Full Shingle

    Full Shingle

    3rd G

    able

    Board

    Wall

    Stud

    Wall

    Stud

    Botto

    m Tr

    im

    Top G

    able

    Top G

    able

    Botto

    m Ga

    ble B

    oard

    Boar

    dG

    able

    Botto

    m

    2nd G

    able

    Board

    2nd G

    able

    Board

    4th G

    able

    Board

    4th G

    able

    Board

    5" S

    iding

    5" S

    iding

    5" S

    iding

    5" S

    iding

    5" S

    iding

    5" S

    iding

    5" S

    iding

    5" S

    iding

    5" S

    iding

    5" S

    iding

    Botto

    m Tr

    im

    Rafte

    rRa

    fter

    Rafte

    r

    Rafte

    r

    Over

    lap R

    oof C

    apUn

    derla

    p Roo

    f Cap

    Roof

    Trim

    Roof

    Trim

    Roof

    Trim

    Roof

    Trim

    Door

    Top T

    rim

    Page 29

  • More Plans from: www.bobsplans.com

    Router Table Workbench Dog House Picnic Table Octagon Table

    6 Foot Bar Corner Desk Book Case Mantel Clock Redwood Planter

    Wheelbarrow Spoke Wheel Panel Saw Trellis Wheelbarrow

    Pocket Hole Jig Tenoning Jig Table Saw Sled Drill Press Table