ceccato ‘csm mini’ range - national air compressors csm mini brochure... · ceccato ‘csm...

Unit 36, 17 Lorraine St, Peakhurst, NSW, 2210

www.nationalaircompressors.com.au

Ph (02) 9534 5522 Fax (02) 9534 5426

[email protected]

ROTARY SCREW TECHNOLOGY A Compact machine with high output & outstanding durability:

A highly efficient airend with no contact between metallic parts. An integrated cooling system, producing cool dry air.

Advanced technology, combining the cost advantages of piston compressors with the reliability of screw compressors. Completely automatic: clean, dry compressed air, continuously available at the touch of a button. Detailed instruction & service manual, full range of spare parts available.

End Paint Failures with the ‘Mini Dry Air Centre’

Eliminate fish eyes, humidity blisters & warranty returns with lab quality CLEAN / DRY air. < 5 ppm oil carryover; < 3 micron particle carryover; moisture dew point of +3 ºC. Fully assembled & mounted on a receiver tank ready to locate & connect. Built-in automatic drains, reducing staff maintenance.

CECCATO ‘CSM MINI’ RANGE ROTARY SCREW AIR CENTRES

Manufactured in Italy, in accordance with



Ph (02) 9534 5522 Fax (02) 9534 5426

[email protected]

MINI Energy Consumption

This compressor’s remarkable efficiency & the airends high output results in a greater flow rate of compressed air for each kW of electricity used.

Not only will you get more air for your dollar, compared to traditional piston compressors, but your maintenance costs will be greatly reduced.

MINI Maintenance Costs and Time

The advanced technology of screw compressors, the careful arrangement of internal components, and easy access allow for fast and economic maintenance.

A detailed owners manual gives full instructions for routine service.

To check the oil level, which is the most frequent service requirement, simply inspect the external indicator, no need to remove panels.

MAXI Silence : MINI Vibration

If, in the past, the problem of noise levels from piston compressors was ignored, now with the OH&S requirements, all workshops can achieve the levels required.

By eliminating the effects of transmitted vibrations, the silence of our airend & efficient soundproofing, we reach noise levels of only 62 to 64 dB(A).

Performance

dB(A)

40 64

75

80 - 85

100

110

130

20



Ph (02) 9534 5522 Fax (02) 9534 5426

[email protected]

Reliability

Ceccato has been producing compressed air since 1938

The CSM Mini range of rotary screw compressors’ reliability is the result of decades of experience in the production and treatment of compressed air.

Smart Condensate Drain

• Draining only water & not compressed air, resulting in energy savings.

• Quiet, no acoustic impact.

Safety Devices: Thermal protection of motor; High oil temperature cut out; Maximum pressure safety valve; Minimum pressure valve; Automatic air intake shut-off; Three-phase IP54 electric motor;



Ph (02) 9534 5522 Fax (02) 9534 5426

[email protected]

Piston Compressors Screw Compressors 65– 70% Of Intake Air Supplied.. Inefficient power consumption, less air for your dollar.

Air Yield

……... 95% Of The Intake Air 25% more air for the same power cost.

Greater Than 80 dB(A) .……. Special or remote location required, OH&S concerns.

Sound Level

….….…... From 62 to 64 dB(A) Install inside, normal conversations possible,

happy employees.

Intermittent : rest cycle req‘d.. 70% maximum duty cycle

Operation

..…..…………………. Continuous 100% onload if required,

more productivity, consistent spray jobs

High Oil & Particle Carryover... Up to 500 ppm oil carryover & 20 micron particle carryover. Causing product & paint contamination, shorter tool life, more warranties.

Air Quality

.. Low Oil & Particle Carryover Less than 5 ppm oil carryover & 3 micron particle carryover.

Cleaner air for improved production, with filters can supply breathing air.

High Humidity Carryover…..… Compressed discharge air > 80 ºC . Resulting in high moisture flow through filters as humidity vapour.

Moisture Carryover

…….. Low Humidity Carryover Compressed discharge air only

10 ºC above ambient temp. Higher humidity condensation, resulting in

greater moisture removal by filters.

High Vibrations……………..… Requires special mounts &/or concrete floors.

Vibrations

…………. Absent of Movement & Vibrations

Wide choice of locations.

High Starting Current…... ‘DOL’ starter can dim lights & trip fuses.

Starting Current

….. Low Starting Current Star Delta as standard.

Basic Thermal Overload.. Less electric motor protection.

Standard Protection

….….…....Circuit Breaker

Enhanced safety for operators & protection from supply problems.

Why choose Ceccato’s ‘CSM Mini’ Screw?



Ph (02) 9534 5522 Fax (02) 9534 5426

[email protected]

Mini Dry Air Centre For specific uses, where high quality compressed air is required, our CSM 7.5 DX Mini Dry Air Centre, with it’s integrated Refrigerated Dryer and final Micro-Filter is a winning combination:

Dry Air

Supplies compressed air without condensate; Safeguards the operation of downstream tools and

equipment; Improves the quality of your final product; Requires less space for installation; Fully assembled & tested, ready to locate & connect;

About National Air Compressors National Air Compressors was formed in 1988. An Australian owned & managed compressed air sales & service company, dedicated to supply the Australian manufacturing industry with the best value & choice of compressed air equipment.

Our 240v Small Compressor Division has the largest model range on the market today. Specialising in custom made units to suit individual varied applications, from emergency rescue vehicles to heavy duty models for the contractor & hire industry.

The 415v Industrial Compressor Division supplies the latest Ceccato rotary screw compressors especially designed for Australian conditions; as well as all the componentry of complete air systems, such as refrigerated air dryers, micro-filters, condensate separators & compressed air pipework.

About Ceccato Aria Compressa The Ceccato company has it headquarters and factory in Vicenza Italy, and has more than 65 years experience in compressed air technology & 35 years of manufacturing rotary screw compressors. Today Ceccato has a prominent position in the European market and is rapidly increasing its presence in other continents, distributing it’s products worldwide through more than 1000 distributors.

Today Ceccato’s rotary screw compressors utilize the ’Airtec’ air end (one of the largest air end manufacturer’s in the world) & Ceccato itself is the largest refrigerated dryer manufacturer in Europe.

In Australia the head office is in Melbourne, utilizing National Distributors such as National Air Compressors to sell & service the product Australia wide.



Ph (02) 9534 5522 Fax (02) 9534 5426

[email protected]

• Warranty : 12 months unlimited hrs, extended to 2 years on airend. • FAD : Free Air Delivery to ISO 1217 & CAGI Pneurop Standard. • dB(A) : ± 3 % open field. • Prices & Specifications : As of September 09, valid 3 months.

Specificatons

CSM 7.5 BX - Mini Screw Compressor

• Base Mounted Stand Alone Rotary Screw Compressor

CSM 7.5 X - Mini Air Centre

• Rotary Screw Compressor

• 200 Litre Air Receiver (certified to Australian Standards)

• Mainline Filter (particles > 1 micron, residual oil < 0.1 mg/m³)

Free Air Delivery 0.60 m³/min (21.2 cfm)

Motor Power 5.5 kW (7.5 hp)

Max Working Pressure 900 kPa (130 psi)

Sound Level 64 dB(A)

Weight 164 Kg

Dimensions (L x W x H) 1,420 x 575 x 1,255 mm

CSM 7.5 DX - Mini Dry Air Centre





Weight 110 Kg

Dimensions (L x W x H) 620 x 605 x 950 mm

• Rotary Screw Compressor

• 200 Litre Air Receiver (certified to Australian Standards)

• Mainline Filter (particles > 1 micron, residual oil < 0.1 mg/m³)

• Oversized Refrigerated Dryer (for hot humid Australian conditions i.e. 35ºC ambient temp)





Weight 198 Kg

Dimensions (L x W x H) 1,420 x 575 x 1,255 mm

ceccato ‘csm mini’ range - national air compressors csm mini brochure... · ceccato ‘csm...

Documents