cdz-e364 7 o.,e,-shotagso 15 - sears parts direct...cdz-e364 7_o.,e,-shotagso 15 camera user guide...

CDZ-E364

7_o.,e,-ShotA GSO 15Camera User Guide

Componen!s Gu!d e

Basic Operations

CommonlyuseciSi_ooiingFunciions

Shooiing Using ..............

variousShootirigaethoasPlayback/Erasing

Print Settings/Transfer Settings

Connecting to a TV

Troubleshooting ......................................................Lis{of Messages ...................................................

Appendix

Workfiow and Reference GuidesThe following guides are available. Refer to them as necessary according to theflowchart below.

: Contents of This Guide

r Getting Started (p. 7)

f Learning More (p. 37)Names camera components and provides more detailed instructions for

_er_.Sh°°ting and playback. Lists information for more advanced use of _your

Connect the camerato other devices

• Connecting to a printer• Connecting to a TV set• Connecting to a computer

Camera User Guide

Direct Print UserGuide

Software SmiterGuide

ZoomBrowser EX/ImageBrowserSoftware User Guide• PDF manuals

available on theCanon website.http://web.canonjp/Imaging/information-e.html

CheckingthePackageContentsI 1

Checking the Package ContentsThe following items are included in the package. If something is missing,

_leasecontact the retail outlet at which you purchased the product.

O Camera O AA Alkaline O MemoryBatteries (x4) Card

(32MB)

Interface CableIFC=400PCU

Wrist Strap WS-DC4

AV CableAVC-DC300

Canon Digital Camera O WarrantySolution Disk Card

You may not be able to achieve the full performance of this camera

wth the nc uded memory card.

You can use SD* memory cards, SDHC (SD High Capacity),_'_" memory cards, MultiMediaCards, MMCplus cards and HC

MMCplus cards in this camera. These memory cards arecollectively referredto as memory cards in this guide.*SDstandsforSecureDigital,a copyrightprotectionsystem.

2 I Table of Contents

Table of ContentsItems marked with a_" are lists or charts that summarize camera

functions or procedures.

Please Read

Preparations ...................................... 8Shooting Still Images (_) Mode) ................... 15

Viewing Still Images ............................... 18Shooting Movies (Fr_] Standard Mode) ................. 19Viewing Movies ................................... 21

Erasing ......................................... 22Printing ......................................... 23Downloading Images to a Computer ................... 25System Map ..................................... 32

Components Guide 38

Indicators ..................................... 41

Power Saving Function .......................... 41

Basic Operations 42

Menus and Settings ............................. 42

_- Menus and Default Settings ....................... 44Using the LCD Monitor ........................... 49Information Displayed on the LCD Monitor ........... 50Resetting Settings to Their Default Values ........... 55Formatting Memory Cards ........................ 56

Commonly Used Shooting Functions 57

[] BI)3 Shooting with the Optical Zoom .............. 57Using the Digital Zoom/Digital Tele-Converter ......... 58_, Using the Flash .............................. 62

Shooting Close-ups (Macro) ................... 63

ITable of Contents I 3

Using the Self-Timer ......................... 64Changing the Recording Pixels (Still Images) ......... 66Changing the Compression (Still Images) ............ 67Configuring the Postcard Mode .................... 68Embedding the Date in the Image Data .............. 69Setting the Image Stabilizer Function ............... 70

Table of Contents I 5

• Symbol Conventions in this Guide

_,rpt_x_at_y_:2)_h_n in_heLeO _i_o_

Mode switch position

Available shooting modes

operation.

This mark denotes additional

topics that complement the_ basic operating procedures.

Explanations in this guide are based on the camera's default settingsat time of purchase.

6 I Please Read

Please ReadTest Shots

Before you try to photograph important subjects, we highly recommend that youshoot several trial images to confirm that the camera is operating and beingoperated correctly.

Please note that Canon Inc., its subsidiaries and affiliates, and its distributors arenot liable for any consequential damages arising from any malfunction of acamera or accessory, including memory cards, that results in the failure of animage to be recorded or to be recorded in a way that is machine readable.

Warning Against Copyright Infringement

Please note that Canon digital cameras are intended for personal use and shouldnever be used in a manner that infringes upon or contravenes international ordomestic copyright laws and regulations. Please be advised that in certain casesthe copying of images from performances, exhibitions, or commercial propertiesby means of a camera or other device may contravene copyright or other legalrights even if the image was shot for personal use.

Warranty Limitations

This camera's warranty is only effective in the country of sale. If a problem ariseswhile the camera is in use abroad, please convey it back to the country of salebefore proceeding with a warranty claim to a Canon Customer Support HelpDesk.

For Canon Customer Support contacts, please see the customer supportlist supplied with your camera.

Video Format

Please set the camera's video signal format to the one used in your region beforeusing it with a TV monitor.

Language Setting

Please see the Setting the Display Language (p. 14) to change the languagesetting.

Getting Started

o PreparationsOShooting Still ImageseViewing Still Imageso Shooting MoviesoViewing Moviese ErasingoPrinting

o Downloading Images to a

oSystem Map

ii i

8 I Preparations

_ Installing the Batteries

! = Slide the battery cover lock (_) and hold it open whilesliding the cover (_) and opening it (_).

Battery Cover Lock (__ __!/_(_)

2= Install four batteries.

(+)

I10 I Preparations

l Inserting the CardMemory

1 = Slide the battery cover lock (_) and hold it open while

sliding the cover (_) and opening it (_).

Battery Cover Lock

2. Insert the memory card until it clicks into place.

Back

(Only SD memory cards)

Example:

SD memory

Ii onfirm that the Write 1

Protect Tab is unlocked

(only SD memory cards).

Check the memory cardfor the correct orientation.

IPreparations I 11

3. Close the cover (_), and press downward as you slide

it until it clicks into place (_).

i_ Ensure that the memory card is correctly oriented beforeinserting it in the camera. Inserting it backward may cause thecamera to fail to recognize the memory card or to malfunction.

• To Remove the Memory Card

Push the memory card with your finger until the memory card clicksand then release it.

.

12 I Preparations

l Opening the LCD Monitor

The LCD monitor can be used to check an image during shooting, toplay back recorded images or to adjust menu settings. It can beopened to the following range of positions.

! = Opened right to left 180degrees.

m

32

Tilted forward 180 degreestoward the lens or backward

90 degrees.

When tilted forward 180 degreestoward the lens, the image shownon the LCD monitor is automaticallyflipped and reversed so that itappears correctly from in front of the lens.

Close the LCD monitor with

the LCD monitor facing out.

When the LCD monitor clicks intoplace against the camera body, theimage will return to its original,nonreversed orientation.

_] hen not using the camera, close the LCD monitor with themonitor facing in to protect it. The LCD monitor willautomatically turn off when it clicks shut against the camerabody.

IPreparations I 13

J Setting the Date and Time

The Date/Time settings menu will appear the first time the power isturned on. Set the date and time as shown in Step 3 and 4.

Power Button

÷1÷1÷1+ B_ons

! = Press the power button.

2= Select [Date/Time].

1. Press the O button.

2. Use the ÷ or 4. button to selectthe [] (Set up) menu.

3. Use the ,IF or _1.button to select[Date/Time].

4. Press the _ button.

3. Select the month, day, year and time, and the display

order.

1. Use the 4" or 4" button to select acategory.

2. Use the ÷ or + button to set thevalue. _ _oo;__o:

4, Press the _ button.

5= Press the 0 button.

14 I Preparations

I_] • You can imprint the date and time you have set onto images(p. 69).• A rechargeable lithium battery is built into the camera to

save such settings as the date/time. Install the batteries intothe camera at time of purchase, or recharge batteries forabout 4 hours using the separately-sold AC Adapter KitACK600. tt will charge even if the camera is turned off.

• The date/time settings may be lost after approximately threeweeks if you remove the main batteries. Reset the date/timesettings if this occurs.

I Setting the Display Language

You can change the language displayed in the LCD monitor menusand messages.

M_eS_ch

4F/_Ik/_,/,_ Buttons - _ Button

Button

I _ Set the mode switch to i_I (Playback).

2, Hold down the _ button and press the 0 button.

3, Use the ÷, +, ÷ or 4" button to select a language.

4_ Press the _ button.

Shooting Still Images I 15

Indicators

OMode Dial

PowerBu_on

Shutter Button

1 = Press the power button.

• The start-up sound will play and the start-up image will display inthe LCD monitor.

• Pressing the power button again turns the power off.

2= Select a shooting mode.

1. Set the mode switch to 0(Shooting).

2. Set the mode dial to _).

3= Aim the camera at the subject. iii_iii_iiiii_iiiiiiiiiiiiiiiiiiiiii

ii

16 J Shooting Still images

4= Press the shutter button lightly (press halfway) to setthe focus.

• When the camera focuses, itbeeps twice and the indicatorlights green (orange when theflash fires).

Shooting Preparations :=Complete: lights green

• An AF frame will display in green onthe LCD monitor at the point of focus.

AF Frame

5= Without changing anything else, press the shutter

button all the way (press fully) to shoot.

• The shutter sound will play Recording:blinksgreenonce and the image willrecord.

• The indicator will blink greenand the file will record to the

memory card.

Mute Setting

Pressing the DISP. button while turning the camera power on will setthe mute setting to [On] to silence all camera sounds except forwarning sounds. The setting can be changed with the [Mute] option inthe Set up Menu.

IShooting Still Images _ 17

Reviewing an Image Right After

Shooting (Rec. Review)

Recorded images are displayed on the LCD monitor for approximately2 seconds immediately after shooting.

_ Button

You can also use the following methods to continue displaying theimage immediately after shooting so that you can check it.

o Keep the shutter button pressed fully.

o Press the _ button while the recorded image displays until itbeeps.

You can shoot by pressing the shutter button even when an imageis being displayed.

[_] hange the image display time from [Review] in the Rec.Menu.

.

18 I Viewing Still Images

Mode Switch

1. Set the mode switch to [] (Playback).

The last recorded image will display.

2= Use the ÷ or "I, button to display the image you wish toview.

• Use the ÷ button to move to theprevious image and the "!, button tomove to the next image.

• The images advance more quickly ifyou keep the button pressedcontinuously, but they will appearcoarse.

_] f you have replayed images, the last image viewed will display(Resume Playback).If the memory card has been switched, or the images on thememory card have been edited with a computer, the newestimage on the memory card appears.

Shooting Movies I 19

Mode Dial

Microphone

Power Button

-- Shutter Button

Mode Switch

1 = Press the power button.

2= Select a shooting mode.

1. Set the mode switch to O(Shooting).

2, Set the mode dial to ,m (Movie),

3. Confirm that the camera is set to[] (Standard).

3, Aim the camera at the subject. RemainingTime

,, • Do not touch the microphone while recording._,_ • Do not press any buttons other than the shutter button. The

sound that buttons make will be recorded in the movie.

20 I Shooting Movies

4= Press the shutter button lightly (press halfway) to setthe focus.

• An electronic beep will soundtwice and the indicator will

light green when the camerafocuses.

• The exposure, focus and whitebalance are automatically setwhen you press the buttonhalfway.

Shooting Preparations =Complete: lights green

5= Without changing anything else, press the shutterbutton all the way (press fully) to shoot.

• Recording starts

• During the recording, theelapsed recording time and [eRec.]will display in the LCD monitor.

62 Press the shutter button again

to stop recording.

• The indicator will blink greenand the data will be recorded

onto the memory card.• Recording will stop

automatically when themaximum recording timeelapses, or the built-in memoryor memory card become full.

Elapsed Time

Recording: blinks green

ViewingMoviesI 21

"t'l'!'l ÷ l ÷ Buttons

Mode Switch

_ Button

1 = Set the mode switch to [] (Playback).

2= Use the 4" or ÷ button to display a movie and press the

button.

• Imageswitha _"_ iconare movies.

3= Use the ÷ or 4" button to select [] (Play) and press the

button.

• The movie will start playing.• If you press the FUNC./SET button

during playback, you can pause andrestart the movie.

• You can adjust the playback volumewith the ,IF or _1, button.

22I Erasing

Button

Mode Switch

" _ Button

1 = Set the mode switch to r_ (Playback).

2_ Use the 4- or .k button to select an image to erase andpress the _ button.

3= Select [Erase] and press the _ button.

• To exit instead of erasing, select[Cancel].

Please note that erased images cannot be recovered. Exerciseadequate caution before erasing an image.

Printing I 23

_ Button --

_'/÷ Bu_ons

Power Button

- DIGITAL Terminal

Terminal Cover

t. Connect the camera to a direct print compatible printer .1.

• Slip a fingernail under the left edge of the terminal cover to openit and insert the interface cable all the way into the connector.

• See the printer's user guide for connection instructions.Canon Brand Printers

DIGITAL Terminal _

SELPHY Series CompactPhoto Printers .2

Interface Cable PIXMA SedesBubble Jet Pdnters

"1 Since this camera uses a standard protocol (PictBridge), you can use it with otherPictBridge-compliant pdnters in addition to Canon-brand printers.

*2 You can also use the CP-10/CP-100/CP-200/CP-300 card photo printers.

24 I Printing

2, Turn on the printer.

3= Set the camera's mode switch to [] (Playback) and

press the power button.

• The r_,,v button will light blue.• A [], [] or [] icon will appear in

the LCD monitor if the connection is

correct (the displayed icons differaccording to the connected printer).

• _"_ will display on movies.

4= Use the 4- or "k button to select an image to print andpress the _,N button.

• The _,,v button will blink blue and printing will start.

After you finish printing, turn off the camera and the printer anddisconnect the interface cable.

Downloading images to a Computer I 25

Items to Prepare• Camera and computer• Canon Digital Camera Solution Disk supplied with the camera• Interface cable supplied with the camera (be sure to use only the

supplied cable)

System RequirementsPlease install the software on a computer meeting the followingminimum requirements.

• Windows

Windows VistaWindows XP Service Pack 2Windows 2000 Service Pack 4

The above OS should be pre-installed on computers with built-in USB ports.

Windows Vista Pentium 1.3 GHz or higherWindows XP/Windows 2000 Pentium 500 MHz or higher

Windows Vista 512 MB or moreWindows XP/Windows 2000 256 MB or more

USB

- Canon Utilities- ZoomBrowser EX 200 MB or more- PhotoStitch 40 MB or more

- Canon Camera TWAIN Driver 25 MB or more

_ 1,024 x 768 pixels/High Color (16 bit) or better

• Macintosh

Mac OS X (v10.3-v10.4)

The above OS should be pre-installed on computers with built-in USB ports.

PowerPC G3/G4/G5 or Intel Processor

256 MB or more

USB

• Canon Utilities- ImageBrowser 300 MB or more- PhotoStitch 50 MB or more

_J_lay 1,024 x 768 pixels/32,000 Colors or better

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii,,,

26 I Downloading Images to a Computer

l Preparing to Download Images

t = Installing the software.

• Windows

1. Place the Canon Digital Camera Solution Disk in thecomputer's CD-ROM drive.

2. Click [Easy Installation],

Follow the onscreen messages toproceed with the installation.

installation is complete.When the installation is finished,

[Restart] or [Finish] will display. Click

the button that appears.

4. Remove the CD-ROM from the

drive when your normal desktopscreen appears.

• Macintosh

Double-click the icon in the CD- .....................................................................ROM window. When the installer _o,_.._,,

panel appears, click [Install]. Followthe onscreen instructions to

proceed.

IDownloading Images to a Computer I 27

2= Connecting the camera to a computer.

1. Connect the supplied interface cable to the computer's USBport and to the camera's DIGITAL terminal.

• Slip a fingernail under the left edge of the terminal cover toopen it and insert the interface cable all the way into theconnector.

USB Port o _ DIGITAL Terminal

ble

3= Preparing to download images to the computer.

1. Set the camera's mode switch to [] (Playback} and turn onthe power.

The camera and computer will be ModeSwitchable to communicate. Power Sutton

,, Always grasp the sides of the connector when disconnectingI_ the interlace cable fr0rn the carnera,s D!G!TAL terrnina!:

[_] f the Digital Signature Not Found window appears, click [Yes].The USB driver will automatically finish installing onto thecomputer when you attach the camera and open a connection.

I28 I Downloading Images to a Computer

• Windows

Select [Canon CameraWindow] andclick [OK].

_ f the window to the right does not appear, click the [Start]menu and select [All Programs] or [Programs], followed by[Canon Utilities], [CameraWind0w], [CameraWindow] and[CameraWindow].

CameraWindow will disptay.

Preparations for downloading images are now finished. Pleaseproceed to the Downloading Images Using the Camera (DirectTransfer) section (p. 29) (except Windows 2000).

I_ omputer. Please refer to the Software Starter Guide fordetails.


• Macintosh

The following window wilI appear ................when you establish a connectionbetween the camera and computer.if it fails to appear, click the[CameraWindow] icon on the Dock(the bar which appears at the bottomof the desktop).

Preparations for downloading images are now finished. Pleaseproceed to the Downloading Images Using the Camera (DirectTransfer) section (p. 29).

[_] ou can download images using the computer. Please refer tothe Software Starter Guide for details.

_ ownloading Images Using the Camera(Direct Transfer)

Use this method to download images using camera operations.(Except Windows 2000)

_[_,A_,Button

@Bu.on

_I_/_I'/@/@ Buttons @ Button

30I Downloading Images to a Computer

[] AIIImages

Newlmages

DPOF Trans.Images

Select &Transfer

Wallpaper

Transfers and saves all images to thecomputer.

Transfers and saves to the computer only theimages that have not been previously transferred.

Transfers and saves to the computer only theimages with DPOF Transfer Order settings.

Transfers and saves single images to thecomputer as you view and select them.

Transfers and saves single images to thecomputer as you view and select them. Thetransferred images display as the backgroundon the computer desktop.

!, Confirm that the Direct Transfer menu is displayed onthe camera's LCD monitor.

• The r_,_ button will light blue.• Press the MENU button if the Direct

Transfer menu fails to appear.

Direct Transfer Menu

• All Images/New Images/DPOF Trans. Images

2, Use the ÷ or 4, button to select [], [] or [] and

press the _,v button.

• The images will download. The _,_button will blink blue while

downloading is in progress.• To cancel the download, press the

FUNC./SET button.


a Select & Transfer/Wallpaper

2= Use the 4= or + button to select [] or [] and press

the G_ (or (_)) button.

3= Use the ÷ or 4' button to select images to download

and press the _ (or _) button.

• The images will download. The _N _button will blink blue while

downloading is in progress.• Pressing the FUNC./SET button will

cancel a download in progress.

4= Press the O button afterdownloading finishes. _'_

• You will return to the Direct Transfer menu.

,, Only JPEG images ca n be se!ected fo r downloading a si_ [Wallpaper] images-

.......Click=-_I-_l[x]Transfer]theeffectimageat thecamera'stheselectionbottomornextthepowertimeright[Wallpaper]screentheofis turnedtheDirectwillwindowappearoptionoff.TransferThetowasdirectlyclosepreviousmenulastthewhenselected,iScameraWindowsettingdisplayed,the [Selectwill beThe&in

and the downloaded images will display on thecomputer.•Windows a Macintosh

.... r _............. ........

ZoomBrowser EX ImageBrowser

By default, images are saved on the computer in folders according to

the shooting date.

32ISystemMap

Supplied with

Camera

........ ,,_tCc_,_I

WS-DC4 _u_

|_J M ry r __

Waterproof CaseWP-DC18

+

Waterproof CaseWeight WW-DCl

Battery and Charger Kit

CBK4-3O0 .5

• Battery Charger CB-5AHICB-5AHE

• AA-size NiMH batteries NB-

3AH (x4)

NiMH Battery NB4-300 (set of4AA-size) also available separately

AC Adapter KitACK60O

• Compact PowerAdapterCA-PS50O

• Power Cordk_

System Map I 33

High-Power Flash Wide Converter Tele-converterHF-DC1 WC-DC58B TC-DC58C

_ C°nversionLens @ WAdapter= LA-DC58J

@Direct Interface Cable

OSD Memory Card .6

SDC-128M

SDC-512MSH

(SELPHY Sedes)

Direct Pnnt CompatibleBubble Jet Printers

(PIXMA Series) .4

Wlndows/Macir_osh

Video IN Terminal

TVNideo

"1 Also available for purchase separately.*2 See the user guide supplied with the printer for more information on the printer.*3 This camera can also be connected to the CP-IOICP-IOOICP-2OOICP-300.

*4 See the user guide supplied with the Bubble Jet printer for more information on theprinter and interface cables.

*5 Battery and Charger Kit CBK4-200 can also be used.

*6 Not sold in some regions.

,,,,,,,

34 I SystemMap

Optional Accessories

The following camera accessories are sold separately.

Some accessories are not sold in some regions, or may no longerbe available.

• Lenses, Lens Adapter

• Conversion Lens Adapter LA-DC58JThis adapter is required for mounting the wide converter and tele-converter to the camera.

• Wide Converter WC-DC58B

Converts the focal distance of the body lens by a factor ofapproximately g.75x when attached.

• Tele-converter TC-DC58C

Converts the focal distance of the body lens by a factor ofapproximately 2x when attached

• Flash

• High-Power Flash HF-DC1This supplementary flash can be attached to your camera when aphotographic subject is too distant for the built-in flash to illuminate.

• Power Supplies

• AC Adapter Kit ACK600

This kit lets you power the camera from any standard householdpower outlet Recommended to power a camera for an extendedperiod of time or when connecting to a computer.

• Battery and Charger Kit CBK4-300

This dedicated battery charger kit includes both a charger unit andfour rechargeabte AA-size NiMH (nickel metal hydride) batteries.Convenient when taking or playing back large numbers of images.

• NiMH Battery NB4-300A set of four rechargeabte AA-size NiMHbatteries.

System Map I 35

• Other Accessories

• SD Memory CardSD memory cards and SDHC memory cards are used to storeimages recorded by the camera.Canon brand memory cards are available in 128 MB and 512 MBcapacities.

• Interface Cable IFC-400PCU

Use this cable to connect the camera to a computer, Compact PhotoPrinter (SELPHY series), or to a Bubble Jet printer (refer to yourBubble Jet printer user guide).

• AV Cable AVC-DC300Use this cable to connect the camera to a TV set.

• Waterproof Case WP-DC18When you attach this waterproof case to the camera, you can use itto take underwater shots at depths of up to 40 meters (130 feet), andof course it is ideal for taking worry-free pictures in the rain, at thebeach, or on the ski slopes.

_ Direct Print Compatible Printers

Canon offers the following separately sold printers for use with thecamera. You can produce photo quality prints quickly and easily byconnecting them to the camera with a single cable and operating thecamera's controls.

• Compact Photo Printers (SELPHY series)• Bubble Jet Printers (PIXMA series)

For more information, visit your nearest Canon retailer.

Use of genuine Canon accessories is recommended.This product is designed to achieve excellent performance when used withgenuine Canon accessories. Canon shall not be liable for any damage tothis product and/or accidents such as fire, etc., caused by the malfunctionof non-genuine Canon accessories (e.g., a leakage and/or explosion of abattery pack). Please note that this warranty does not apply to repairsarising out of the malfunction of non-genuine Canon accessories, althoughyou may request such repairs on a chargeable basis.

!!'ii!'ii!'ii!'ii!'ii!'i_!

!!!!!!!!!!!!!!!!!_

Learning More

38 I Components Guide

• Front View

®®®

®@ ®

®

®

(_ SpeakerAF-assist Beam (p. 45)

(_ Red-Eye Reduction Lamp (p. 89)(_ Self-Timer Lamp (p. 64)

Viewfinder Window (p. 39)(_ Flash (p. 62)(_ Ring (p. 186)(_ Ring Release Button (p. 186)(_ Lens

Microphone (p. 147)

Components Guide I 39

• Back View

(_) LCD Monitor (p. 49)(_) Viewfinder

(_ A/V OUT (Audio/Video Output) Terminal (p. 157)(_) Wrist Strap Mount (p. 9)(_) DIGITAL Terminal (pp. 23, 27)(_ Terminal Cover

(_ DC IN (Power Input) Terminal (p. 184)(_) Memory Card Slot / Battery Cover (p. 8)(_ Memory Card Slot / Battery Cover Lock (p. 8)

Tripod Socket

@

Using the Viewfinder

The viewfinder can be used to conserve power by turning the LCDmonitor off (p. 49) while shooting.

I40 I ComponentsGuide

• Controls

(_ _,_,_ (Print/Share) Sutton (p. 121)(_ Indicators (p. 41)(_ Power Sutton (p. 13)(_ Power Lamp(_ Shutter Sutton (p. 16)

Zoom Lever (pp. 57, 130)Shooting: [] (Wide Angle)/E_ (Telephoto)Playback: _ (Index)/ O. (Magnify)

(_ Mode Dial (p. 72)(_ Mode Switch (pp. 15, 18, 21)

IS0/_ (Jump) Button (pp. 105, 134)MENU Sutton (p. 43)

(_ FMNC./SET Button (pp. 42, 44)DISP. Button (p. 49)[] (Exposure)/ /_ (Single Image Erase) Button (pp. 108, 22)

(_ _. (Flash)/ I" Sutton (p. 62)4, Button_ (Macro)/MF (Manual Focus)/ • Button (pp. 63, 99)4- Button

IComponents Guide I 41

J Indicators

The indicators on the back of the camera will light or blink under thefollowing conditions.• Upper Indicator

Green: Ready to shoot (camera beeps twice)Blinking Green: Image recording/reading/erasing/transferring (when

connected to a computer/printer)Orange: Ready to shoot (flash on)

Blinking Orange: Ready to shoot (camera shake warning), chargingflash

• Lower Indicator

Yellow: Macro mode/Manual focus mode/AF lock mode

Blinking Yellow: Focusing difficulty (camera beeps once)

A'h Never do the following while the indicator blinks green. Thesey actions may corrupt image data.

- Shake or jolt the cameraShut off the power, or open the memory card slotJbatterycover

_ Power Saving Function

This camera is equipped with a power saving function. The power willshut off in the following circumstances. Press the power button again torestore power.

Powers down approximately 3 minutes after thelast control is accessed on the camera. The LCDmonitor automatically turns off 1 minute* after

Shooting Mode the last control is accessed even if [Auto PowerDown] is set to [Off]. Press any button other thanthe power button or change the cameraorientation to turn the LCD monitor back on.

Playback Mode Powers down approximately 5 minutes after theConnected to a Printer last control is accessed on the camera.

* This time can be changed.

_] • The power saving function will not activate during an AutoPlay or while the camera is connected to a computer.• The power saving function settings can be changed (p. 47).

42I Basic Operations

I Menus and Settings

Settings for the shooting or playback modes, or camera settings suchas the print, date/time, and sound settings are set using the FUNC./SET button or the MENU button.

• _ Button (Func. Menu)

This menu sets many of the common shooting functions.

5

@

• This example shows the FUNC.

menu in _) mode.

I I

3 I

Set the mode switch to 0 i

_ Press the _ button.

MUse the 4_ or !, button to select a menu item.• Some items may not be selectabte in some shooting modes.

4 Use the ÷ or + button to select an option for

the menu item.

• You can change the settings for options indicated withusing the DISP. Button.

• After selecting an option, you can press the shutter button toshoot immediately. After shooting, this menu will appear again,allowing you to adjust the settings easily.

_ Press the _ button,

IBasic Operations _ 43

• 0 Button (Rec•, Play, Print and Set Menus)up

Convenient settings for shooting, playback or printing can be set withthese menus.

[] (Rec.) Menu -- -- [] (Set up) Menu

t 5

You can switch I I I I

he eeomonoswi,h

the ÷ or ,_ button. 4'

This example shows the Rec. menu in _) mode.

1_ Press the _ button,

Use the ,IF or ,I, button to select a menu item.

• Some items may not be selectabte in some shooting modes.

4 Use the ÷ or ÷ button to select an option•

• Menu items followed by an ellipsis (...) can only be set afterpressing the FUNC./SET button to display the next menu. Pressthe FUNC./SET button again to confirm the setting, then press

the MENU button to return to the menu screen.

_ Press the _ button.

I44 I Basic Opera_ions

I Menus and Default Settings

See Functions Available in Each Shooting Mode

FUNC. Menu

The icons shown here indicate the default settings (factory settings).

Reference ReferenceMenu Item Menu ItemPage Page

[] White Balance p. 111 [] Metering Mode p. 109

Compression[] Drive Mode pp. 64, 88 [] (Still image) p. 67

Recording Pixels[] My Colors p. 114 [] (Still image) p. 66

+/- (Flash) / Recording PixelsFlash Output p. 116 [] (Movie) p. 79

Rec. Menu [] *Default setting

Menu Item Options Contents/Reference Page

AF Frame_)!k'l/_/ ._/_/_,_/$CN Face Detect/AiAF/Center p 93

P/Tv / AV/M Center*/FlexiZone/Face Detect/

IAiAF. IAF Frame Size INormal /Small Ip 95Digital Zoom

(St mage) Standard*/Oft!1 5x/2 0x. ip. 58

(Movie) Standard/Off

I(In standard movie mode only) I

Flash Sync 11st-cu _ain*/2nd-curtain Ip 119

Slow Synchro IOn/Oft Ip 90

Flash Adjust Auto*/Manual Ip 116

Red-Eye On*lOft p. 89

Basic Operations I 45

Contents/Menu Item Options Reference Page

Safety FE On*/Off p. 120

Spot AE Point Center*/AF Point p. 110

Safety Shift On/Offf p. 86

Auto ISO Shift Off*/_N Button/On p. 106

MF-Point Zoom On*/Off p. 99

Safety MF On*/Off p. 100

AF-assist Beam On*/Off

Review You can set thelength of time

Off/2"-10 seconds/Hold images displayafter being shot(p. 17).

Review lnfo Off*/Detailed/Focus Check p. 91

Reverse Disp. On*/Off

Disp. Overlay

isii,im_g;i O_GridLin;si312Guid;iB;ihI ' 122(Movie) Offf/Grid Lines

s Mode(St mage) Contnuous*/Shoot Ony/

iPanning/Off ip.70

(Movie) Continuous*/Off p. 185Converter None*/WC-DC58B/TC-DC58C

Date Stamp Off*/Date/Date & Time p. 69

Set _,_ button _'_*lmt[]t[_t[] t _1 p. 121

Save Settings p. 123

I46 I Basic Opera4ions

Play Menu []

ReferenceMenu ItemPage

[] Auto Play p. 139

[] Red-EyeCorrection p. 140

[] Resize p. 145

[] Sound Memo p. 147

[] Protect p. 148

[] Rotate p. 137

[] Eraseall p. 149

[] Transfer Order p. 155

[] Transition p. 138

Print Menu []

Menu Item

Print

Select Image & Qty.

Select All Images

Clear All Selections

Print Settings

ReferencePage

p. 150

Set up Menu [] *Defaultsetting

Menu Item Options ContentslReference Page

Mute On/Off* Set to [On] to silence all operationsounds except for the warning sounds.

Volume Off/1/2"/3/4/5 Adjusts the volume of the start-upsound, operation sound, self-timersound, shutter sound and playbacksound. The volume cannot beadjusted if [Mute] is set to [On].

Start-up VoL Adjusts the volume of the start-upsound when the camera is turned on.

Operation VoL Adjusts the volume of the operationsound that beeps when any buttonother than the shutter button ispressed.

Selftimer Vol. Adjusts the volume of the self-timersound played 2 sec. before the shutteris released.

Shutter Adjusts the volume of the soundVolume played when the shutter releases. The

shutter sound does not play when amovie is recording.



Playback VoL Adjusts the playback volume ofmovies and sound memos.

Start-up Image On*/Off Sets whether or not the Start-up Imageappears when the camera is poweredon.

Power Saving ). 41

Auto Power On*/Off Sets whether or not the cameraDown automatically powers down after a set

period of time elapses without thecamerabengope[a!ed:

Display Off 10 sec./20sec./30 sec./1min.*/2 min./3min.

Date/Time

Format

File Numbering Continuous*/Auto Reset

Create Folder

Sets the length of time before the LCDmonitor turns off when no cameraoperation is performed.

p. 13

You can also select a low level format(p. 56).

p. 128

p. 126

Create New Check mark Creates a folder during the nextFolder (On)/ shooting session.

No check mark(Off)

You can also set an auto creation time.Auto Create Off*/Daily/Monday-Sunday/Monthly

On*/Off

m/cm* fit/in

minute* /0 seconds

NTSC/PAL

Auto Rotate p. 125

Distance Units Sets the units for the MF indicatordistance unit (p. 99).

Lens Retract Sets the lens retraction timing whenswitching from shooting mode toplayback mode.

Language p. 14

Video System p. 157

48I Basic Opera_ions


Print Method Auto*/_i See below .1.

Reset All p. 55

"1 The connection method with the printer can be changed for printing. Althoughit is normally not necessary to change the setting, select [] when borderlessprinting an image shot in [] (Widescreen) mode on wide size paper usingCanon compact photo printer SELPHY CP750/CP740/CP730/CP720/CP710/CP510. As this setting will be stored to memory even when the power is turnedoff, to print using an image size other than IWl, return the mode to [Auto](however, the connection method cannot be changed while connected to aprinter).


i Using the LCD Monitor

.....t;resst.eu,on ...................................................................................................................................................................................................................................The display mode changes as follows with each press.

Shooting Mode (1_1) Playback Mode (r-_)

_NoSnt_r_ma radion) _ No Inf_mation

_ I ('nfOrDetit_nedView ) I Starldard

I Derailed

[_] • The LCD monitor on or off setting is retained even after thecamera power is turned off.• The LCD monitor does not shut off in the rl_ or _,_, mode.

• The LCD monitor will not switch to the detailed display orfocus check display while in magnified display or indexplayback mode.

Night Display

When shooting at dusk or during the evening when the darksurroundings make it difficult to view the LCD monitor, the camera's"night view" option* displays the subject brightly in the LCD monitor.This will allow you to compose a shot even in dark environments (thissetting cannot be turned off).* Although noise may appear and the movement of the subject shown on the LCD

monitor may appear somewhat jagged, there is no effect on the recorded image.The brightness of the image displayed in the monitor, and the brightness of the

actual image recorded will be different.

50I Basic Opera4ions

l Information Displayed on the LCD Monitor

Shooting Information (Shooting Mode)

[ ] Spot AE Point Frame/

,_ ] [] AF Frame

®

ISO Speed

White Balance

Drive Mode

My Colors

Flash ExposureCompensation/Flash Output

Metering Mode

Compression (Still image)

Recording Pixels (Still image)

Recording Pixels (Movies)

Digital Tele-ConvertedZoomMagnification

Flash

Auto Rotate

Shooting Mode

Movie Recording

Low BatteryZoom Bar

MF indicator

[]/1.5x_.0x

mD[]

mE3_[]B_]E[][][]m[][][]m_q

[e Rec.] (Red)

[] (Red)

p. 104

p. 111

pp. 64, 88

p. 114

p. 116

p. 109

p. 67

p. 66

p. 79

p. 58

p. 62

p. 125

p. 72

p. 19

p. 178

p. 57

p. 99

m

(_) Camera Shake Warning

AE Lock/FE L_ck

Shutter Speed

(_ Aperture Value*

Exposure Compensation

Macro__ I AF Lock/Manual Focus

Image Stabilizer

Create Folder []

Stills: Recordable ShotsMovies: Remaining Time/Elapsed Time

IBasic Ope_tions I 51

p.70p. 126

pp. 19,197,198

[](Red) pp. 51,160

[] pp. 101,103

pp. 83,87

pp. 85,87

p. 108

p. 63

p. 97

15-1/2000

F2.8-F8.0

%W_[][]

* Displays when the shutter button is pressed halfway. Since the camera automaticallyreadjusts for the optimal settings when using the flash, settings displayed in shooting

information may differ from the actual settings.

[_] f the indicator blinks orange and the camera shake warningicon (_J) is displayed, this indicates that a slow shutter speedmay have been selected due to insufficient illumination. Usethe following methods to shoot:- Set the IS mode to any setting other than [Off] (p. 70)- Raise the ISO speed (p. 104)- Set the Auto tSO Shift to any setting other than [Off].- Select a setting other than [] (flash off) (p. 62)- Attach the camera to a tripod or other device


Playback Information (Playback Mode)• Standard

m

®

Displayed Image Number/Total Number of Images

Folder Number-File Number

Compression (Still Images) _ _] _]Recording Pixels (Still Images)

Movie []

WAVE Format Sound []

Red-Eye Corrected/Resized []

Protection Status []

Shooting Date/Time

p. 128

p. 67

p. 66

p. 21

p. 147

pp. 140,145

p. 148

p. 13

• Detailed

m

rHistogram (p. 54)

Shooting Mode

Metering Mode

ISO Speed

mD_[]B[]_mD_R[]m[][]_[]m_mmm

p. 72

p. 109

p. 104

-- ShutterSpeedApertureValueRecordingPixels/FrameRate

__(Movies)ExposureCompensationFlashExposure

__Compensation/FlashOutputWhiteBalanceIMyColors

(_Red-EyeCorrectionFunctionAFLock/ManualFocus

__MacroFileSize

_)StillImage:RecordingPixels__Moves:MoveLength

Basic Operations ] 53

15-1/2000

F2.8-F8.0

[][]_a[]@[]

%W_

[]_...Ra

DDU_Mm_[]_m[]m[][][]

pp. 84, 87

pp. 85, 87

p. 79

p. 108

p. 117

p. 111

p. 114

p. 140

pp. 98, 99

p. 63

p. 198

pp. 197,198

• Focus Check Display

_)1 Displayed Image Number/Total Number of ImagesI Compression (Still Images) I [] [] [] p. 67

p66lUTh e Eocus Check display _nn°t be selected for m°vies!


The following information may also be displayed with some images.

A sound file in a format other than the WAVE format is attached or[] the file format is not recognized.

JPEG image not conforming to Design rule for Camera File System_k Standards (p. 194).

_ PAW imagemage record ng p xe sett ng not recogn zed

_] • Information for images shot on other cameras may notdisplay correctly.• Overexposure Warning

In the following cases, overexposed portions of the imageblink.

- When reviewing an image right after shooting in the LCDmonitor (information view)

- When using the detailed display mode of the playbackmode

Histogram Function

The histogram is a graph that allows you to check the brightness ofthe image. The greater the bias toward the left in the graph, thedarker the image. The greater the bias toward the right, the brighterthe image, tf the image is too dark, adjust the exposurecompensation to a positive value. Similarly, adjust the exposurecompensation to a negative value if the image is too bright (p. 108).

Sample Histograms

Dark Image Balanced Image Bdght Image


Resetting Settings to Their Default Values[][]

[_] • When the camera is in shooting mode and the mode dial isset to C, only the settings saved for C mode will return todefault settings. This is the only way to return C modesettings to defaults.

• Settings cannot be reset when the camera is connected to acomputer or to a printer.

• The following cannot be reset.- Shooting mode- The [Date/Time], [Language] and [Video System] options

in the [] menu (pp. 46, 47)- White balance data recorded with the custom white

balance function (p. 112)

I56 I Basic Opera_ions

l Formatting Memory Cards [][B

You should always format a new memory card or one from which youwish to erase all images and other data.

i_ Please note that formatting (initializing) a memory card erasesall data, including protected images and ether file types.

1. Press the @ button.

2. Use the I, or ,_ button to select the

_1 menu.

3. Use the 4_ or ÷ button to select

[Format].

4. Press the @ button.

21. Use the ÷ or ,_- button to select

[OK]2. Press the @ button.

To perform a low level format, usethe 4_ button to select [Low LevelFormat] and the ÷ or ,_ button toadd a check mark.

You can stop formatting a memorycard when [Low Level Format] is selected by pressing theFUNC./SET button. You can still use a memory card withoutproblem when formatting is halted, but its data will be erased.

i_] • Low Level FormatWe recommend you select [Low Level Format] when youthink that the recording/reading speed of a memory card hasdropped. A low level format may require 2 to 3 minutes withsome memory cards.

Commonly Used Shooting Functions I 57

l li_ El3 with the ZoomShooting Optical []See Functions Available in Each Shooting Mode (p. 214).

The zoom can be adjusted from 35 mm -210 mm (focal length) in35mm film equivalent terms. The zoom bar will display while you adjustthe zoom.

.....1 P,essthezoom ..............................lever toward [] or

i ] Wide Angle: Zooms out from thesubject.Et)3 Telephoto: Zooms in on thesubject.

Zoom Bar

58I Commonly Used Shooting Functions

I Using the Digital Zoom/Digital Tele-Converter [][] See Functions Available in Each Shooting Mode (p. 214).

* Cannotbe set in [] and [] modes.

YOUcan combine digital zoom with optical zoom when shooting.The available shooting characteristics and focal lengths (35mm filmequivalent) are as follows:

Selection Focal Length

Standard 35 - 840 mm

Off 35 - 210 mm

1.5x* 52.5 - 315 mm

2.0x* 70 - 420 mm

Shooting CharacteristicsEnables shooting at zoom factors of up to24x with digital and optical zoomcombined.

Enables shooting without digital zoom.

Digital zoom is fixed at the selected zoomfactor, and the focal length shifts tomaximum telephoto. This enables a fastershutter speed and less chance of camerashake than a shot taken at the same angleof view with [Standard] or [Off].

* Cannotbeset in lib mode.

i_ • The d g ta zoom cannot be used when the LCD mon tor sturned off.

• The digital zoom cannot be used in [] or [] (Postcard), orr-wl (Widescreen)modes.

Shooting with the Digital Zoom

1. Press the O button.

2. In the [] menu, use the ,IF or

button to select [Digital Zoom].

60 ] Common{y Used Shooting Functions

Safety Zoom Zone

Depending on the number of recording pixets set, you can zoomwithout pausing up to a factor where the image quality does notdeteriorate (Safety Zoom).The [] icon displays when reaching the maximum zoom factorwithout image deterioration. At this point, the image can be furthermagnified by pressing the zoom lever toward Ed)3(telephoto) again.• Depending on the number of recording pixels set, the Safety Zoom

zone varies as follows.

Recording Pixels Optical Zoom i Digital Zoom

[] (4000×3000)

[] (3264×2448) 7.4x

[] (2592×1944) !......................................................__i

[] (1600×1200) !:.......................................................:__

m (640×480)

[_] White : Optical Zoom (Zone without deterioration)Yellow: Digital Zoom (Zone without deterioration)Blue - Digital Zoom (Zone with deterioration)

ICommonly Used Shooting Functions _ 61

Shooting with the Digital Tele-Converter

Digital Tele-Converter

The digital tete-converter feature uses digital zoom to achieve theeffects of a tete-converter (a lens used in telephoto shooting).

62I Common{y Used Shooting Functions

l_ Using the Flash [][] See Functions Available in Each Shooting Mode (p. 214).

* Cannot be set in I_and [] modes.

1. Use the ÷ or 4, button to changethe flash mode.

• •:[off]

: _[_: [On][Auto]

You are recommended to shoot with the camera attached to atripod or other device if the camera shake warning icon []appears.


_ Shooting Close-ups (Macro) []See Functions Available in Each Shooting Mode (p. 214).

* Cannot be set in [] mode.Use this mode to shoot close-ups of flowers or small items. Atmaximum wide angle, the image area is 28 x 20 mm (1.1 x 0.79 in.)when at the minimum focusing distance (1 cm (0.4 in.) from the end ofthe lens to the subject).

To Cancel the Macro Mode

Press _ and use the ÷ or 4, button to select [] (Normal).

• Use the LCD monitor to compose close-ups in macro modesince image s composed with th e viewfinder may be off -center.

• using the flash in macro mode may cause image edges todarken.

64I Commonly Used Shooting Functions

l_ Using the Self-Timer [][] See Functions Available in Each Shooting Mode (p. 214).

* Cannot be set in [] mode.You can set the time delay and the numbers of shots you wish to takein advance.

10 sec. Self-Timer: shoots f0 seconds after you press the

[] shutter button.2 seconds before the shutter releases, the self-timer lamp andsound speed up.

2 sec. Self-Timer: shoots 2 seconds after you press the shutter

[] button.The self-timer sound beeps quickly when you press the shutterbutton and the shutter releases 2 seconds later.

Custom Timer: you can change the delay time (0-f0, 15, 20, 30sec.) and number of shots (f-10*).

[] When [Delay] is set to 2 or more seconds, the self-timer soundbeeps quickly 2 seconds before the shutter releases.

mode,


2. Use the ,IF or ,11-button to select []and the ÷ or "I, button to change

the option.


2 Shooi ............................................................................................................................................................................................................................................................................................................................................................When the shutter button is pressed fully, the self-timer willactivate and the self-timer lamp will blink (when using red-eyereduction, itwill stay lit for the last 2 seconds).

To Cancel the Self-Timer

Follow Step 1 to display [].* Default setting is 3 shots.

ICommonly Used Shooting Functions _ 65

Changing the Delay Time and Number of Shots

[_] f the [Shots] option is set to 2 or more shots, the followingOccurs.

- The exposure and white balance are locked at the settingsselected for the first shot.

- If the flash is used, the interval between shots lengthensbecause the flash must charge.

- The interval between shots may lengthen when the built-inmemory of the camera fills.

- Shooting will automatically cease if the memory cardbecomes full.

66] Commonly Used Shooting Functions

I Changing the Recording Pixels (Still Images) [][] See Functions Available in Each Shooting Mode (p. 214).

* Cannot be set in [] mode.

setting.


2. Use the 41"or 41. button to select []and the ÷ or ,I_ button to change

the option.


Approximate Values for Recording Pixels

Recording Pixels

[] (Large)

[] (Medium 1)

[] (Medium 2)

[] (Medium 3)

[] (Small)

[] .2 or [] .2

(Postcard)

12M 4000 x 3000

8M 3264x2448

5M 2592x 1944

2 M 1690x1209

0.3_ 649 x 480

Purpose .1High Printingto aboutA2-size

,j, 420 x 597 mm (16.5 x 23A in.)Printingto aboutA3-size297 x 429 mm (11.7 x 16.5 in.)Printingto aboutA4-size210 x 297 mm (8.3 x 11.7 in.)Printingto about Letter-size216 x 279 mm (8.5 x 11 in.)Print postcard-size prints148 x 100 mm (6 x 4 in.)Print L-size prints119 x 89 mm (4.7 x 3.5 in.)

_FSendimagesase-mailLowattachmentsorshootmoreimages

1609 x 1260 When printing to postcards (p. 68).

Printing on wide size paper (you can checkr_ .2 the composition at a 16:9 aspect ratio.4609 x 2248(Widescreen) Areas that will not be recorded appear on

the LCD monitor as a black border.)

"1 Paper sizes vary according to region.

*2 Cannot be set in [] mode.

: Approximate recording pixels. (M is short for megapixels.)


_ Changing the Compression (Still Images) []See Functions Available in Each Shooting Mode (p. 214).


2. Use the ,IF or • button to select []and the ÷ or "F button to change

the option.


Approximate Values for Compression Settings

Compression

[] Superfine High Quality

[] Fine

[] Normal Normal

Purpose

Shoot higher quality images

Shoot normal quality images

Shoot more images

[_] • See Image Data Sizes (Estimated) (p. 198).• See Memory Cards and Estimated Capacities (p. 197).

68] Common{y Used Shooting Functions

I Configuring the Postcard Mode [][] See Functions Available in Each Shooting Mode (p. 214).


You can shoot images with the optimal settings for postcards bycomposing them inside the print area (width-to-height ratio ofapproximately 3:2) shown in the LCD monitor.


2. Use the ÷ or _1, button to select []and choose [] with the ÷ or ,_button.


• The recording pixet and compressionsettings are fixed (2 megapixels,1600 x 1200, tl).

• The area that will not print displays in gray.

i_The digital zoom or the digital tele-converter cannot be used inthis rn0de -

_] For printing instructions, refer to the Direct Print User Guide.

T


_ Embedding the Date in the Image Data []See Functions Available in Each Shooting Mode (p. 214).


You can embed the date in the image data when [] (Postcard) isselected.

I70 _ Commonly Used Shooting Functions

d" • Ensure that the camera's date/time is set beforehand (p. 13)._,_ • The date stamp cannot be deleted from the image data once

it has been embedded.

_] o imprint the date on all but [] size images, use the suppliedsoftware (ZoomBrowser EX or ImageBrowser) or printersettings. For details, please see the user guide for eachproduct.

I Setting the Image Stabilizer Function

[] See Functions Available in Each Shooting Mode (p. 214).

* Only [Continuous] and [OFT']can be set.The lens shift image stabilizer function (IS mode) allows you tominimize the camera shake effect (blurred images) when you shootdistant subjects that have been magnified or when you shoot in darkconditions without a flash.

Off Turns off the image stabilizer function.

You can check the effect of the IS mode on image blur on

[] Continuous the LCD monitor since the IS mode runs continually. Thismakes it easier to compose images and focus onsubjects.IS mode is only activated when the shutter button ispressed, so subjects will be captured with reduced blur

[] Shoot Only even if their movements on the LCD monitor are notsmooth.

This option only stabilizes the effect of up and down[] Panning camera motions on the image. This option is

recommended for shooting objects moving horizontally.


LCD Monitor Icons

[Continuous] [Shoot Only] [Panning] [Converter]setting Referencein Rec. menu Page

[] [] [] NoneWC-DC58B/ p. 200

[] [] [] TC-DC58C

i_ • Camera shake may not be fully corrected when shootingwith slow shutter speeds, such as with evening shots.

Switch the Auto ISO Shift to a setting othe r than [off], or usea tripod to shoot.

• If camera shake is too strong, it may not be fully corrected.• Hold the camera horizontally while panning (stabilization

does not work when the camera is held vertically).• If you select [Shoot Only] or [Panning] in shooting mode (still

images) and then switch to ,n mode, the setting will changeto [Continuous]. (If you further switch to a different shootingmode from _m, the settings will change back to the originalcondition.)

cdz-e364 7 o.,e,-shotagso 15 - sears parts direct...cdz-e364 7_o.,e,-shotagso 15 camera user guide...

Documents