ccent icdn1 routing and switching essentials certification exam v5
DESCRIPTION
ciscoTRANSCRIPT
18/9/2014 CCENT ICDN1 Routing and Switching Essentials Certification Exam v5
http://4routing.com/ccent-icdn1-routing-and-switching-essentials-certification-final-exam-v5-2013/ 1/22
4ROUTING
CCNA 1 v5, CCNA 2 v5, CCNA 3 v5, CCNA 4 v5 Routing and Switching Exams Answers v5 2013-2014, IT Essentials
v5 Exam Answers
CCENT (ICND1) Practice Certi�cation Exam v5Routing and Switching
CCENT ICDN1 Routing and Switching Essentials Certi�cation Final Exam
v5 2013
18/9/2014 CCENT ICDN1 Routing and Switching Essentials Certification Exam v5
http://4routing.com/ccent-icdn1-routing-and-switching-essentials-certification-final-exam-v5-2013/ 2/22
_______________________________________________________________
_______________________________________________________________
_______________________________________________________________
^ Back to Top
18/9/2014 CCENT ICDN1 Routing and Switching Essentials Certification Exam v5
http://4routing.com/ccent-icdn1-routing-and-switching-essentials-certification-final-exam-v5-2013/ 3/22
_______________________________________________________________
_______________________________________________________________
_______________________________________________________________
18/9/2014 CCENT ICDN1 Routing and Switching Essentials Certification Exam v5
http://4routing.com/ccent-icdn1-routing-and-switching-essentials-certification-final-exam-v5-2013/ 4/22
_______________________________________________________________
8
Which three statements accurately describe duplex and speed settings on Cisco 2960 switches?
(Choose three.)
When the speed is set to 1000 Mb/s, the switch ports will operate in full-duplex mode.
An autonegotiation failure can result in connectivity issues.
By default, the autonegotiation feature is disabled.
Enabling autonegotiation on a hub will prevent mismatched port speeds when connecting the hub to
the switch.
The duplex and speed settings of each switch port can be manually con�gured.
By default, the speed is set to 100 Mb/s and the duplex mode is set to autonegotiation.
By default, autonegotiation is enabled on a Catalyst 2960 switch. However, the duplex and speed
settings can be manually con�gured for each switch port. If the speed is set to 1000 Mb/s, the switch
ports will operate in full-duplex mode. Switches, not hubs, can be con�gured for auto negotiation.
_______________________________________________________________
18/9/2014 CCENT ICDN1 Routing and Switching Essentials Certification Exam v5
http://4routing.com/ccent-icdn1-routing-and-switching-essentials-certification-final-exam-v5-2013/ 5/22
_______________________________________________________________
10
When creating an IPv6 static route, when must a next-hop IPv6 address and an exit interface both be
speci�ed?
when CEF is enabled
when the static route is a default route
when the next hop is a link-local address
when the exit interface is a point-to-point interface
Link-local addresses are only unique on a given link, and the same address could exist out multiple
interfaces. For that reason, any time a static route speci�es a link-local address as the next hop, it must
also specify the exit interface. This is called a fully speci�ed static route.
_______________________________________________________________
Refer to the exhibit. Which password will the administrator need to use on this device to enter
privileged EXEC mode?
Cisco
class
password
cisco
_______________________________________________________________
18/9/2014 CCENT ICDN1 Routing and Switching Essentials Certification Exam v5
http://4routing.com/ccent-icdn1-routing-and-switching-essentials-certification-final-exam-v5-2013/ 6/22
_______________________________________________________________
_______________________________________________________________
14
18/9/2014 CCENT ICDN1 Routing and Switching Essentials Certification Exam v5
http://4routing.com/ccent-icdn1-routing-and-switching-essentials-certification-final-exam-v5-2013/ 7/22
Refer to the exhibit. OSPFv2 has been con�gured on router R1, and the router-id command has not
been manually con�gured. When the network administrator reboots router R1, what will be the value
of the OSPF router ID?
172.16.1.1
192.168.2.254
10.15.15.1
10.0.10.2
If the router ID is not exactly speci�ed by the router-id command, then the highest IPv4 address on any
con�gured loopback interface(s) would become the router ID.
_______________________________________________________________
_______________________________________________________________
18/9/2014 CCENT ICDN1 Routing and Switching Essentials Certification Exam v5
http://4routing.com/ccent-icdn1-routing-and-switching-essentials-certification-final-exam-v5-2013/ 8/22
_______________________________________________________________
_______________________________________________________________
18
A network administrator is using the router-on-a-stick model to con�gure a switch and a router for
inter-VLAN routing. What con�guration should be made on the switch port that connects to the router?
Con�gure the port as an access port and a member of VLAN1.
Con�gure the port as an 802.1q trunk port.
Con�gure the port as a trunk port and assign it to VLAN1.
Con�gure it as a trunk port and allow only untagged tra�c.
The port on the switch that connects to the router interface should be con�gured as a trunk port. Once
it becomes a trunk port, it does not belong to any particular VLAN and will forward tra�c from various
VLANs.
_______________________________________________________________
18/9/2014 CCENT ICDN1 Routing and Switching Essentials Certification Exam v5
http://4routing.com/ccent-icdn1-routing-and-switching-essentials-certification-final-exam-v5-2013/ 9/22
_______________________________________________________________
20
A network administrator is designing an IPv4 addressing scheme and requires these subnets.
1 subnet of 100 hosts
2 subnets of 80 hosts
2 subnets of 30 hosts
4 subnets of 20 hosts
Which combination of subnets and masks will provide the best addressing plan for these requirements
9 subnets of 126 hosts with a 255.255.255.128 mask
3 subnets of 126 hosts with a 255.255.255.128 mask
6 subnets of 30 hosts with a 255.255.255.224 mask
3 subnets of 126 hosts with a 255.255.255.192 mask
6 subnets of 30 hosts with a 255.255.255.240 mask
1 subnet of 126 hosts with a 255.255.255.192 mask
2 subnets of 80 hosts with a 255.255.255.224 mask
6 subnets of 30 hosts with a 255.255.255.240 mask
IPv4 subnets that require 100 and 80 hosts are provided by creating subnets of 126 usable addresses,
each of which requires 7 host bits. The resulting mask is 255.255.255.128.
Subnets that require 30 and 20 hosts are provided by creating subnets of 30 usable addresses, each of
which requires 5 host bits. The resulting mask is 255.255.255.224.
Creating nine subnets, each consisting of 126 usable addresses, would waste large numbers of
addresses in the six smaller subnets.
_______________________________________________________________
18/9/2014 CCENT ICDN1 Routing and Switching Essentials Certification Exam v5
http://4routing.com/ccent-icdn1-routing-and-switching-essentials-certification-final-exam-v5-2013/ 10/22
_______________________________________________________________
22
Refer to the exhibit. A network administrator has con�gured R2 for PAT. Why is the con�guration in?
The static NAT entry is missing.
NAT-POOL2 is bound to the wrong ACL.
The ACL does not de�ne the list of addresses to be translated.
The overload keyword should not have been applied.
In the exhibit, NAT-POOL 2 is bound to ACL 100, but it should be bound to the con�gured ACL 1. This
will cause PAT to fail. 100, but it should be bound to the con�gured ACL 1. This will cause PAT to fail.
_______________________________________________________________
_______________________________________________________________
24
18/9/2014 CCENT ICDN1 Routing and Switching Essentials Certification Exam v5
http://4routing.com/ccent-icdn1-routing-and-switching-essentials-certification-final-exam-v5-2013/ 11/22
Refer to the exhibit. Which two statements are based on the output as shown in the exhibit? (Choose
two.)
The output is the result of the show ip nat translations command.
The host with the address 209.165.200.235 will respond to requests by using a source address of
192.168.10.10.
The host with the address 209.165.200.235 will respond to requests by using a source address of
209.165.200.235.
Tra�c with the destination address of a public web server will be sourced from the IP of 192.168.1.10.
The output is the result of the show ip nat statistics command.
The output displayed in the exhibit is the result of the show ip nat translations command. Static NAT
entries are always present in the NAT table, while dynamic entries will eventually time out.
_______________________________________________________________
_______________________________________________________________
26
18/9/2014 CCENT ICDN1 Routing and Switching Essentials Certification Exam v5
http://4routing.com/ccent-icdn1-routing-and-switching-essentials-certification-final-exam-v5-2013/ 12/22
Refer to the exhibit. Interfaces Fa0/5, Fa0/7, and Fa0/9 are the only connected ports on the switch
CiscoSwitch. All other ports are unused. Which security best practice did the administrator forget to
con�gure?
Change the native VLAN to a �xed VLAN other than VLAN 1.
All active user ports are associated with VLANs distinct from VLAN 1 .
Delete VLAN 1 from the switch CiscoSwitch.
Con�gure all unused ports to a ‘black-hole’ VLAN that is not used for anything on the network.
All access ports are placed in VLAN 1 by default. This VLAN is the default VLAN and cannot be deleted
or renamed. Security best practices dictate that user ports should be changed to something other than
VLAN 1 with the command switchport access vlan ID.
_______________________________________________________________
27
18/9/2014 CCENT ICDN1 Routing and Switching Essentials Certification Exam v5
http://4routing.com/ccent-icdn1-routing-and-switching-essentials-certification-final-exam-v5-2013/ 13/22
Refer to the exhibit. Interfaces Fa0/2, Fa0/4, and Fa0/6 are connected to users on the data network of a
switch named CiscoSwitch. Interface Fa0/24 is connected to a �le server on the management network.
All other ports are unused. Which security best practice did the administrator forget to con�gure?
Con�gure all unused ports to a ‘black-hole’ VLAN that is not used for anything on the network.
Change the native VLAN to a �xed VLAN other than VLAN 1.
Disable autonegotiation on interfaces that are not being utilized as a trunk.
Delete VLAN 1 from CiscoSwitch.
Cisco switches use DTP to autonegotiate between each other. It is recommended to disable
autonegotiation to prevent any malicious users from forming a trunk with the Cisco switch on
nontrunking interfaces.
_______________________________________________________________
_______________________________________________________________
29
A network engineer is con�guring PAT on a router and has issued the command:
ip nat source list 1 interface serial 0/1/0 overload
Which additional command is required to specify addresses from the 192.168.128.0/18 network as the
18/9/2014 CCENT ICDN1 Routing and Switching Essentials Certification Exam v5
http://4routing.com/ccent-icdn1-routing-and-switching-essentials-certification-final-exam-v5-2013/ 14/22
inside local addresses?
access-list 1 permit 192.168.128.0 255.255.192.0
access-list 1 permit 192.168.128.0 0.0.127.255
access-list 1 permit 192.168.128.0 0.0.63.255
ip nat inside source list 1 pool INSIDE_NAT_POOL
ip nat inside source static 192.168.128.0 209.165.200.254
A standard access list with the appropriate wildcard mask speci�es the inside local addresses to be
translated. The ip nat inside source list 1 pool NAT_POOL command con�gures NAT to use a pool of
outside global addresses, not a single outside interface address as required. The ip nat inside source
static 192.168.128.0 209.165.200.254 command con�gures one-to-one static NAT, not PAT as the
overload keyword speci�es.
_______________________________________________________________
_______________________________________________________________
_______________________________________________________________
_______________________________________________________________
18/9/2014 CCENT ICDN1 Routing and Switching Essentials Certification Exam v5
http://4routing.com/ccent-icdn1-routing-and-switching-essentials-certification-final-exam-v5-2013/ 15/22
_______________________________________________________________
_______________________________________________________________
_______________________________________________________________
36
Which three statements describe a DHCP Discover message? (Choose three.)
The source MAC address is 48 ones (FF-FF-FF-FF-FF-FF).
The destination IP address is 255.255.255.255.
The message comes from a server o�ering an IP address.
The message comes from a client seeking an IP address.
All hosts receive the message, but only a DHCP server replies.
Only the DHCP server receives the message.
_______________________________________________________________
37
Which two issues might cause excessive runt and giant frames in an Ethernet network? (Choose two.)
native VLAN mismatch
damaged cable connector
a malfunctioning NIC
18/9/2014 CCENT ICDN1 Routing and Switching Essentials Certification Exam v5
http://4routing.com/ccent-icdn1-routing-and-switching-essentials-certification-final-exam-v5-2013/ 16/22
excessive collisions
using the in cable type
inly con�gured auto-MDIX feature
In an Ethernet network, a runt is a frame that is shorter than 64 bytes and a giant is a frame that is
longer than the maximum allowed length. Both are often caused by NIC malfunctioning, but can also be
caused by excessive collisions. CRC errors usually indicate a media or cable error caused by electrical
interference, loose or damaged connections, or using the in cabling type.
_______________________________________________________________
_______________________________________________________________
_______________________________________________________________
40
Fill in the blank.
A late collision occurs after 512 bits of a frame have been transmitted.
_______________________________________________________________
_______________________________________________________________
18/9/2014 CCENT ICDN1 Routing and Switching Essentials Certification Exam v5
http://4routing.com/ccent-icdn1-routing-and-switching-essentials-certification-final-exam-v5-2013/ 17/22
_______________________________________________________________
_______________________________________________________________
_______________________________________________________________
18/9/2014 CCENT ICDN1 Routing and Switching Essentials Certification Exam v5
http://4routing.com/ccent-icdn1-routing-and-switching-essentials-certification-final-exam-v5-2013/ 18/22
_______________________________________________________________
46
Which series of commands will cause access list 15 to restrict Telnet access on a router?
R1(con�g)# line vty 0 4
R1(con�g -line)# access-class 15
R1(con�g)# line vty 0 4
R1(con�g -line)# ip access-group 15 in
R1(con�g)# int gi0/0
R1(con�g -if)# access-class 15 in
R1(con�g)# int gi0/0
R1(con�g -if)# ip access-group 15 in
Once an access list to restrict Telnet or SSH access has been created, it is applied to the vty lines with
the access-class command. This will restrict Telnet or SSH access.
_______________________________________________________________
_______________________________________________________________
_______________________________________________________________
49
A user calls the help desk to report that a Windows XP workstation is unable to connect to the network
18/9/2014 CCENT ICDN1 Routing and Switching Essentials Certification Exam v5
http://4routing.com/ccent-icdn1-routing-and-switching-essentials-certification-final-exam-v5-2013/ 19/22
after startup and that a popup window says “This connection has limited or no connectivity.” The
technician asks the user to issue the ipcon�g /all command. The user reports the IP address is
169.254.69.196 with subnet mask of 255.255.0.0 and nothing is displayed for the DNS server IP address.
What is the cause of the problem?
The workstation NIC has malfunctioned.
The subnet mask was con�gured inly.
The DNS server IP address needs to be con�gured.
The workstation is unable to obtain an IP address from a DHCP server.
_______________________________________________________________
50
Open the PT Activity. Perform the tasks in the activity instructions and then answer the question.
Which code is displayed on the web browser?
Great!
It works!
Welldone!
Inter-VLAN con�gured!
_______________________________________________________________
_______________________________________________________________
18/9/2014 CCENT ICDN1 Routing and Switching Essentials Certification Exam v5
http://4routing.com/ccent-icdn1-routing-and-switching-essentials-certification-final-exam-v5-2013/ 20/22
_______________________________________________________________
_______________________________________________________________
_______________________________________________________________
18/9/2014 CCENT ICDN1 Routing and Switching Essentials Certification Exam v5
http://4routing.com/ccent-icdn1-routing-and-switching-essentials-certification-final-exam-v5-2013/ 21/22
Category: CCNA 2 Routing and Switching Essentials v5 Tags: CCENT ICDN1 certi�cation exam , CCENT
ICDN1 Routing and Switching Essentials Certi�cation Final Exam v5 2013 , ccent v5 RSE 2013 �nal
exam , icdn 1 exam RSE v5
18/9/2014 CCENT ICDN1 Routing and Switching Essentials Certification Exam v5
http://4routing.com/ccent-icdn1-routing-and-switching-essentials-certification-final-exam-v5-2013/ 22/22
3 Comments 4routing Login
Sort by Oldest Share ⤤
Join the discussion…
• Reply •
Hung Duong • 9 months ago
Please change the name "CCENT ICDN1 Routing and Switching EssentialsCertification Final Exam v5 2013" to "CCENT (ICND1) Practice Certification Exam"
http://farm4.staticflickr.com/... 1△ ▽
• Reply •
4routing (ADMIN) • 9 months agoMod > Hung Duong
thanks! △ ▽
• Reply •
naxju • 3 months ago
Hi, do you have CCNA (ICND2) Cert Practice Exam Answers or related link for this?Kindly share...much appreciated! Thanks!
△ ▽
Subscribe✉ Add Disqus to your sited
Favorite ★
Share ›
Share ›
Share ›