cc2000 how it works

TheThe Constant Constant CleanCleanThe next generation in The next generation in solvent recycling solvent recycling technology.technology.

• Reduces Down Time

• Reduces Hazardous Waste

• Reduces Costs

• Reduces Greenhouse Gas Emissions

**** All information contained within is proprietary to ChemChamp. Proprietary information may include associated patents, patent applications, copyrights, trade secrets, know-how, documents, etc. ****

TheThe Constant Constant CleanCleanQuickly turns used solvent

Simply connect the Constant Clean to your parts washer for clean solvent, all day, every day.

into clean solvent without degrading performance


The Constant Clean Features

• Recycles up to 24 gallons per day

• Can be attached to any parts cleaner

• Compatible with all solvents with a flash point over 104oF

• Plugs into a standard 110V wall outlet

• Automatic, hands free operation

• Can be easily moved between multiple parts washers

• Almost no moving parts to fail and low maintenance requirements


• Ability to use the same solvent over and over, without any degradation in performance

• Dramatic reduction in hazardous waste

• Cleaner parts and less cleaning time

• Works completely automatically; no change to your process

The Constant Clean Benefits


The Constant Clean continuously repeats a simple 3-Step Cycle to keep parts washing fluid clean.

How The Constant Clean Works

1. Heat-Up

2. Cool-Down3. Transfer


Step 1: Heat-Up

The Constant Clean heats up, boiling the dirty parts washing fluid to produce solvent vapor inside the recycling unit.



Step 2: Cool-Down

The pure solvent vapor is condensed, cooled and pushed back into the parts washer.


After 2 gallons have been recycled, the Constant Clean automatically enters cool down mode


As the unit cools, it draws in parts washing fluid.

Step 3: Transfer


The Constant Clean continues to draw in dirty solvent and replace it with clean solvent.

After each cycle the parts washing fluid becomes more & more clean.


After a few days, the Constant Clean returns the solvent to near virgin quality and maintains this level of purity.



The The ConstantConstant CleanCleanThe next generation in The next generation in solvent recycling solvent recycling technology.technology.

INSTALLATIONINSTALLATION


1. Add 9 gallons of solvent to the parts washer.

2. Place the copper pipe into the parts washer sink.

3. Remove the plug on the ball valve at the end of the priming hose, then open the ball valve and attach it to the parts washer faucet.

4. Turn ON the parts washer until the fluid comes out the end of the copper tube.

Priming the Constant Clean

The Constant Clean Installation


5. Turn OFF the parts washer.

6. Close the ball valve on the priming hose, remove it from the parts washer faucet & replace the ball valve plug.

7. Place the copper pipe into the waste drum.

8. Plug the recycler in to a 110V outlet.

9. Turn it on

The Constant Clean Installation


The Constant Clean will operate for months with little to no maintenance.

Solvent will be kept clean and waste will collect inside the distillation chamber. This happens completely automatically.

When the chamber eventually becomes full, the waste full light will turn on. This means that it is time to drain the waste and re-prime the unit.

To do so, wait until the Room Temperature light turns on, drain 3-5 gallons of waste from the unit using the priming hose, and re-prime.

The Constant Clean Operation


The Constant Clean

Actual demonstration of the Constant Clean.

The solvent turns water clear in only 24hrs.

Note:Clock in background has been time-lapsed for illustrative purposes.


For more information contact us at:

1-800-916-2247

Or visit us on the web:www.ChemChamp.com


cc2000 how it works

Automotive

proprietary information

patent applications

trade secrets

associated patents

dirty parts

parts washer faucet

moving parts

parts washer sink