CB001

Assembly instructions

PART NUMBER PART NAME SUPPLIER CODE 1 Round bakelite handle CB00101 2 LID CB00102 3 Air vent with handle(for

Lidl) CB00103

4 Hanging hook CB00104 5 Square bakelite handle CB00105 6 Fire bowl CB00106 7 Air vent with handle(for

fire bowl) CB00107

8 Ash tray CB00108 9 Leg R CB00109 10 Leg L CB00110 11 Wire shelf CB00111 12 Leg-M CB00112 13 Wheel(150) CB00113

1.Leg L …. 1pc

2. Leg-R ......... 1pcs

3. Wire shelf... 1pc

4. Leg-M..... 1pcs

5. Square bakelite handle..2pcs

6 . Wheel(150) ... 2pcs

7. Air vent with handle(for fire bowl).......1pcs

8. Fire bowl..... 1pcs

9.Charcoal grid.. 1pcs

10. Cooking grid …... 1pcs

11. Round bakelite handle…... 1pcs

12. Lid ... 1pcs

13. Air vent(for lid)....... 1pcs

14. Hanging hook ... 1pc

15 Ash tray......1pcs

For outdoor use only. Improper installation, adjustment, alteration,

service or maintenance can cause property damage, injury or death. Read the installation, operating and maintenance instructions thoroughly before installing or servicing this equipment.

Warning: accessible parts may be very hot. Keep young children away.

Do not move the appliance during use. Any modification of the appliance may be

dangerous. Installer to leave instructions with the consumer

and consumer to retain them for future reference.

A

4pcs H

2 pcs

B

4 pcs

I

2 pcs

C

2 pcs J

Bolt M6 x 35 mm

4 pcs

D

2 pcs

K

2 pcs

E

12pcs L

4 pcs

F

4 pcs M

2 pcs

G

2 pcs

Bolt M5 x 32 mm

Bolt M6 x 15 mm

Flat Washer Ø4.0 mm

Lock Washer Ø5.0 mm

Flat Washer Ø6.0 mm

Nut M6

Bolt M5 x 10 mm

Wing Nut

Nut M5

Bolt M4x 20 mm

Nut M4

Nut M8

Dispose of all polythene packing carefully and keep out of the reach of children. Please read the section on barbecue safety prior to using your Barbecue.

TOOLS REQUIRED *Philips screwdriver *Pliers or adjustable spanner

IMPORTANT NOTES *Do not use this appliance indoors. *Do not use this appliance inside a tent, gazebo or whithin a confined space. *This heater will become very hot during and for some time after use.Keep children away from the heater and do not touch metal parts of the heater when in use. Use suitable gloves for protection, especially *when loading the heater with logs and coal. We recommend protecting your heater when not in use with a cover to protect from rusting and exposure to rain. STEP 1 Insert Leg L (Part 1) and Leg R (Part 2) to the Leg M (Part 4) as shown, and then assemble Bottom shelf (Part 3) to the legs.

STEP 2 Assemble wheel axis through Leg L & R and Wheel (Part 6), use bolt (x, 2) to tighten. STEP 3 Assemble Body handle (Part 5) to the Pan (Part 8) as shown, use bolt B (x, 4) to tighten.

STEP 4 Assemble Air valve (Part 7) to the Pan as shown, use bolt, nut to tighten. STEP 5 Assemble Pan to the legs as shown, use Lock washer C (x, 4), Nut F(x, 4), Flat washer E(x, 4), Bolt J(x, 4) to tighten.

STEP 6 Place Cooking grid (Part 9) into the Pan. STEP 7 Then place Cooking grid (Part 10) into the Pan.

STEP 8 Assemble Cover air valve (Part 13) to the Top cover (Part 12)as shown, use bolt I (x, 1), Flat washer D(x, 1) and Wing nut K (x, 1) to tighten. STEP 9 Assemble Cover handle (Part 14) as shown, use Bolt H(x, 2) and Nut M(x, 2) to tighten.

STEP 10 Assemble Top cover to the Pan as shown. STEP 11 Uplift Ash pot, turn it clockwise and get it stuck with legs.

Your barbecue is now ready for use.Please take care when

lighting your barbecue.always keep children away from this

barbecue at all time.

Thank you for purchasing one of our quality Jumbuck BBQs. YOUR JUMBUCK BBQ IS COVERED AGAINST DEFECTS FOR A PERIOD OF 12 MONTHS FOR PARTS AND LABOUR, REPAIR OR REPLACEMENT THIS WARRANTY EXCLUDES SURFACE RUST AND DAMAGE CAUSE BY ABUSE OR NEGLECT CONDITIONS OF THE WARRANTY . The appliance must be operated and maintained in accordance with the instructions supplied in the operating manual. . Any repair does not extend the warranty period.. Any parts other than original Jumbuck parts will Void this warranty. FOR WARRANTY CLAIMS This warranty for Australia is given by : Genesis Australia Corporation Pty Ltd 2/26 Industy St Malaga WA 6090 08 9248 9822 service@genesiscorp.com.au The warranty for New Zealand is given by Bunnings NZ Ltd, PO Box 14436, Panmure, Auckland, 1741 Tel: 09 9782200 Fax: 09 9782222 Email: Marketing@bunnings.co.nz Any claim under this warranty must be made within 12 months from the date of purchase of the product. Proof of purchase must be presented.

WARRANTYFor Australian Customers To make a claim under the warranty please contact service@genesiscorp.com.au or return the product (with proof of purchase) to any Bunning store. (see.www.bunnings.com.au for store locations) Genesis Australia Corporation Pty Ltd bears reasonable, Direct expenses of claiming under the warranty. You may submit details and proof to us for consideration. The warranty covers manufacturer defects in materials, workmanship and finish under normal use. This warranty is provided in addition to other rights and remedies you may have under law: our goods come with guarantees which cannot be exluded under the Australian Consumer Law. You are entitled to replacement or refund for a major failure and to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. For New Zealand Customer To make a claim under the warranty please contact the store where the barbeque was purchased. This warranty is provided in addition to other rights and remedies of Consumer Guarantees Act 1993. (NZ) Goods presented for repair may be replaced by NZ refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods Please thoroughly read conditions of warranty

FOR TECHNICAL ASSISTANCEFor Australia customers if you experience any technical issues with your JUMBUCK BBQ, in the first instance review the instructions manual or contact the warranty service agent. For New Zealand customers if you experience any technical issues with your JUMBUCK BBQ, in the first instance review the instructions manual or contact your local Bunnings warehouse FOR SPARE PARTS Call your local Bunnings warehouse and ask them to order a part for you. You should provide the following information: Model of BBQ......................................................... Year of purchase...................................................... Name of warranty service company above........................................................ Part that requires replacement (refer to the list of spare parts in the instructions manual)...............................................

WHAT IS NOT COVERED IN THE WARRANTY

Removal or re-installation costs. This warranty does not cover costs for transit, nor in home service

Liability will only be accepted for loss or damage during transit if at the time the product was being transported by Bunnings or a Bunnings approved contractor.

Lack of maintanence, abuse, neglect, misuse, accidental or improper installation of this appliances

Scratches, dents, corrosion or discoloration caused by heat, abrasive chemicals cleaners or chipping of porcelain enamel parts

Corrosions or damage caused by exposure to elements such as insects, weather, hail or grease and fat fires

Rusting of grill

Cleaning and wear and tear, service calls of this nature are chargeable

Commercial use of this product

Unauthorized repairs or modification during warranty period

RECORD THE FOLLOWING INFORMATION Attached the copy of the purchase receipt here

Date of Purchase.........................................................

Purchased From..........................................................

Location......................................................................

Model Name and Number...........................................

Serial Number.............................................................

Receipt Number..........................................................

Note: The serial number is located either on the outside of the packing carton or outside or inside the appliance