caterpillar 330cl hydraulic pipelayer

6
CATERPILLAR 330CL HYDRAULIC PIPELAYER

Upload: delta-machinery

Post on 20-Feb-2016

224 views

Category:

Documents


11 download

DESCRIPTION

Caterpillar 330CL Hydraulic Pipelayer Revolutionary state of the art patented design

TRANSCRIPT

Page 1: Caterpillar 330CL Hydraulic Pipelayer

STANDARD EQUIPMENT

Caterpillar 330CL excavator upper and lower structure

• Boom stop (Positive boomstop)• Anti Two Block Device• Center Point Swing Bearing• Automatic Boom Kick-out• Double Security System for Piloting• CE and EPA Certifi ed• TUV Chartered Engineers Certifi cation• High visibility during operation with adjustable higher seat. • Kick out boom• Anti-two block system• Swing Alarm• Back up alarm• Left side joystick safety switch

CATERPILLAR 330CLHYDRAULIC PIPELAYER

Revolutionary state of the art patented design

Dealer:

Disclaimer

The information contained in this brochure is intend to be of a general use only. Delta may at any time for technical or other necessary reasons modify any of the specifi cations mentioned. Illustrations do not necessarily show the product in standard conditions. The dimensions, weights and capacities shown are approximate only and are subjects to variations within normal manufacturing techniques.

CATERPILLAR 330CLHYDRAULIC PIPELAYER

The Netherlands

Delta Machinery

Haven M529, Port of MoerdijkMark S Clarkelaan 64761RK ZevenbergenThe Netherlands

Tel + 31 888 966 966Fax + 31 888 966 950

[email protected]

United Arabic emirates Ras Al Khaimah Machineries LLC Kharran Road, Al fi liyahRas Al KhaimahUnited Arab Emirates

Tel + 971 72289338Fax + 971 72289337

[email protected]

United states of America

Equipment Investco

3340 Greens road, Suite 400Houston TexasUnited states of America

Tel +1281 590 7474Fax +1713 2032444

[email protected]

opmaak330cl .indd 1 09-01-13 15:22

Page 2: Caterpillar 330CL Hydraulic Pipelayer

STANDARD EQUIPMENT

Caterpillar 330CL excavator upper and lower structure

• Boom stop (Positive boomstop)• Anti Two Block Device• Center Point Swing Bearing• Automatic Boom Kick-out• Double Security System for Piloting• CE and EPA Certifi ed• TUV Chartered Engineers Certifi cation• High visibility during operation with adjustable higher seat. • Kick out boom• Anti-two block system• Swing Alarm• Back up alarm• Left side joystick safety switch

CATERPILLAR 330CLHYDRAULIC PIPELAYER

Revolutionary state of the art patented design

Dealer:

Disclaimer

The information contained in this brochure is intend to be of a general use only. Delta may at any time for technical or other necessary reasons modify any of the specifi cations mentioned. Illustrations do not necessarily show the product in standard conditions. The dimensions, weights and capacities shown are approximate only and are subjects to variations within normal manufacturing techniques.

CATERPILLAR 330CLHYDRAULIC PIPELAYER

The Netherlands

Delta Machinery

Haven M529, Port of MoerdijkMark S Clarkelaan 64761RK ZevenbergenThe Netherlands

Tel + 31 888 966 966Fax + 31 888 966 950

[email protected]

United Arabic emirates Ras Al Khaimah Machineries LLC Kharran Road, Al fi liyahRas Al KhaimahUnited Arab Emirates

Tel + 971 72289338Fax + 971 72289337

[email protected]

United states of America

Equipment Investco

3340 Greens road, Suite 400Houston TexasUnited states of America

Tel +1281 590 7474Fax +1713 2032444

[email protected]

opmaak330cl .indd 1 09-01-13 15:22

Page 3: Caterpillar 330CL Hydraulic Pipelayer

BASE MACHINE

Caterpillar 330 Excavator CONVERSION KIT

DELTA 330 Hydraulic conversion kit:State of the Art patented design delivers excellent visibilityto the job site which increase operator condifence, comfort, effectiveness and enhanced safety.

CONVERSION KIT IS AVAILABLE ON BRAND NEW AND USED CATERPILLAR 330L/ 330BL/ 330CL/ 330DL/329E ENGINE

Brand : CaterpillarModel : C9Bore : 112.0 mm (4.41 in)Stroke : 149.0 mm (5.87 in)Displacement : 8.8 L (537 in3)Certifi cation rating : 247HP/ 184kWAspiration : TurbochargedEmissions meet : U.S. EPA and EU Stage IIIA Control system ADEM A4 electronic engine controller maximizes fuel effi ciency and performance by maintaining the optimum balance between engine speed and hydraulic demand.

TIPPING CAPACITY

Maximum lift 65.000 kg

OPERATING WEIGHT

36.150 kg

COUNTERWEIGHT

Total weight : 6415 kg / 14,140 lbs

CONTROLS

Fully hydraulic dual joystick controlled

DRIVE

Type : Hydrostatic Max. Drawbar Pull : 294 kN / 66,094 lbMain pumps : Two-speed auto-shift travelBrand : Caterpillar Max fl ow : 280 lit/minFinal drive : Compact design with three stages

planetary production

CAB

Airconditioning : IncludedHeater : IncludedClimate Control : Positive fi ltered ventilation with a

pressurized cabSeat : Air suspension and high visibility Design : Visibility, comfort and easy operation

allows the operator to focus on safe production and increase productivity

Sound performance : Meets OSHA and MSHA requirements

BOOM Frame : Tabular A-Frame boom engineerd

for maximum lift capacity and easy detachment

Length : 7,30 meter2-speed hook block : HIGH - 17 mtr/min, LOW - 8 mtr/min

HYDRAULIC WINCHES Make : Paccar/ Braden, Planetary dual

brake lifting and deriking winch.Hydraulic motors : Bosch/Rexroth 2 speed Hydr.

Piston motorsDiameter wire rope Boom : 3/4 Inch / 19mmDiameter wire rope Load : 3/4 Inch / 19mm

UNDERCARRIAGE Number of bottom rollers : 8Number of carrying rollers : 2Shoes type : Single Grouser / Tripple GrouserStandard shoes width : 610 mm / 24 InchTrack Frames : Heavily reinforced track frame

brackets minimizes stresses in upper frame and swing bearing and optimize stability

FLUID CAPACITIES

Fuel tank : 618 ltr. / 163 gal Hydraulic system circuit : 410 ltr. / 108 galCooling system : 38 ltr. / 10 gal Engine oil : 36 ltr. / 9,4 gal Final drive each : 15 ltr. / 4 gal

OPTIONS • Delta Load Management System for increase effectiveness

and safety • Boom mounted light bar with in-cab monitor and warning

systems to optimize safety • Load Cell • Reverse Camera • Cold Weather Kit • GPS Telemetry System • Optional boom lengths available • Excavator attachments to convert machine to conventional

Caterpillar 330CL excavator

DIMENSIONS Length Width Height

Machine (without boom): 5.930 3.440 3.160 Boom 7.300 1.620 0,700

Total Shipping Volume : 65 m3

FEATURES & BENEFITS 330 Conversion kit: Kit specifi cations have advanced safety features in addition to the updated and market ability of the Caterpillar equipment

3 side working range: It’s confi guration allows the sideboom to operate from the right, left and in the front

Prepare for transportation: Machine can be taken from working- to transport mode in a matter of minutes

Transportation: Can be transported in one load, without dismantling anything from the machine

Multi-axis: Hydraulic joystick allows simultaneous, precise control of the load and boom functions with one hand.

Joysticks: Dual joystick-controlled hydraulic system is easy to operate and requires minimum operators training.

Boom stop: Hydraulic boomstop stops automatically prevents system over travel and boom damage.

Multifunctional:330CL Pipelayer can be converted in a conventional excavator by swapping the boom in a short period of time.

CATERPILLAR 330CL HYDRAULIC PIPELAYER

4040

5020

5930

2590

3440

3160

6230

7880

13350

3440

15050

1399

1279

1159

1038

415

380

344

308

358

351

344

337

1200 1400 1600 1800 2000 2200

EngineTorque lb•ft

EnginePower bhp

BSFClb/bhp-hr

100

90

80

70

60

50

40

30

20

10

0

220

200

180

160

140

120

100

80

60

40

20

1

4 6 8 10 12 14 16 18 20 22 24

1.5 2 3 3.5 4 4.5 5 5.5 6 6.5 72.5

Working RangeISO 8813

lb x1000

kg x1000

M

Ft

Lifti

ng C

apac

ity

Boom Overhang

Max. Lift Capacity PER S.A.E. J743B

Max. Load Capacity ISO 8813

1 2 3

4 5 6

7 8 9

2 3

5 6

8 9

1 Caterpillar C9 Tier IIIA Engine 247HP (made in USA)

2 LMI safety system on request (made in Netherlands)

3 Boom mounted lightbar with in-cab monitor on request

(made in Netherlands)

4 Paccar Braden winches (made in USA)

5 Bosch/Rexroth hydraulic motors for winches (made in Germany)

6 Left and right re-inforced track frame brackets to minimize stress on track frames (made in Netherlands)

7 Front heavy duty bracket for maximum lifting capacity (made in Netherlands)

8 Hydraulic operated kit lifter to change working range or transport mode (made in Netherlands)

9 Can be transported in one load without dismantling anything

(Designed in Netherlands)

CE marked

Delta 330CL patented pipelayer conversion kit

opmaak330cl .indd 2 09-01-13 15:23

Page 4: Caterpillar 330CL Hydraulic Pipelayer

BASE MACHINE

Caterpillar 330 Excavator CONVERSION KIT

DELTA 330 Hydraulic conversion kit:State of the Art patented design delivers excellent visibilityto the job site which increase operator condifence, comfort, effectiveness and enhanced safety.

CONVERSION KIT IS AVAILABLE ON BRAND NEW AND USED CATERPILLAR 330L/ 330BL/ 330CL/ 330DL/329E ENGINE

Brand : CaterpillarModel : C9Bore : 112.0 mm (4.41 in)Stroke : 149.0 mm (5.87 in)Displacement : 8.8 L (537 in3)Certifi cation rating : 247HP/ 184kWAspiration : TurbochargedEmissions meet : U.S. EPA and EU Stage IIIA Control system ADEM A4 electronic engine controller maximizes fuel effi ciency and performance by maintaining the optimum balance between engine speed and hydraulic demand.

TIPPING CAPACITY

Maximum lift 65.000 kg

OPERATING WEIGHT

36.150 kg

COUNTERWEIGHT

Total weight : 6415 kg / 14,140 lbs

CONTROLS

Fully hydraulic dual joystick controlled

DRIVE

Type : Hydrostatic Max. Drawbar Pull : 294 kN / 66,094 lbMain pumps : Two-speed auto-shift travelBrand : Caterpillar Max fl ow : 280 lit/minFinal drive : Compact design with three stages

planetary production

CAB

Airconditioning : IncludedHeater : IncludedClimate Control : Positive fi ltered ventilation with a

pressurized cabSeat : Air suspension and high visibility Design : Visibility, comfort and easy operation

allows the operator to focus on safe production and increase productivity

Sound performance : Meets OSHA and MSHA requirements

BOOM Frame : Tabular A-Frame boom engineerd

for maximum lift capacity and easy detachment

Length : 7,30 meter2-speed hook block : HIGH - 17 mtr/min, LOW - 8 mtr/min

HYDRAULIC WINCHES Make : Paccar/ Braden, Planetary dual

brake lifting and deriking winch.Hydraulic motors : Bosch/Rexroth 2 speed Hydr.

Piston motorsDiameter wire rope Boom : 3/4 Inch / 19mmDiameter wire rope Load : 3/4 Inch / 19mm

UNDERCARRIAGE Number of bottom rollers : 8Number of carrying rollers : 2Shoes type : Single Grouser / Tripple GrouserStandard shoes width : 610 mm / 24 InchTrack Frames : Heavily reinforced track frame

brackets minimizes stresses in upper frame and swing bearing and optimize stability

FLUID CAPACITIES

Fuel tank : 618 ltr. / 163 gal Hydraulic system circuit : 410 ltr. / 108 galCooling system : 38 ltr. / 10 gal Engine oil : 36 ltr. / 9,4 gal Final drive each : 15 ltr. / 4 gal

OPTIONS • Delta Load Management System for increase effectiveness

and safety • Boom mounted light bar with in-cab monitor and warning

systems to optimize safety • Load Cell • Reverse Camera • Cold Weather Kit • GPS Telemetry System • Optional boom lengths available • Excavator attachments to convert machine to conventional

Caterpillar 330CL excavator

DIMENSIONS Length Width Height

Machine (without boom): 5.930 3.440 3.160 Boom 7.300 1.620 0,700

Total Shipping Volume : 65 m3

FEATURES & BENEFITS 330 Conversion kit: Kit specifi cations have advanced safety features in addition to the updated and market ability of the Caterpillar equipment

3 side working range: It’s confi guration allows the sideboom to operate from the right, left and in the front

Prepare for transportation: Machine can be taken from working- to transport mode in a matter of minutes

Transportation: Can be transported in one load, without dismantling anything from the machine

Multi-axis: Hydraulic joystick allows simultaneous, precise control of the load and boom functions with one hand.

Joysticks: Dual joystick-controlled hydraulic system is easy to operate and requires minimum operators training.

Boom stop: Hydraulic boomstop stops automatically prevents system over travel and boom damage.

Multifunctional:330CL Pipelayer can be converted in a conventional excavator by swapping the boom in a short period of time.

CATERPILLAR 330CL HYDRAULIC PIPELAYER

4040

5020

5930

2590

3440

3160

6230

7880

13350

3440

15050

1399

1279

1159

1038

415

380

344

308

358

351

344

337

1200 1400 1600 1800 2000 2200

EngineTorque lb•ft

EnginePower bhp

BSFClb/bhp-hr

100

90

80

70

60

50

40

30

20

10

0

220

200

180

160

140

120

100

80

60

40

20

1

4 6 8 10 12 14 16 18 20 22 24

1.5 2 3 3.5 4 4.5 5 5.5 6 6.5 72.5

Working RangeISO 8813

lb x1000

kg x1000

M

Ft

Lifti

ng C

apac

ity

Boom Overhang

Max. Lift Capacity PER S.A.E. J743B

Max. Load Capacity ISO 8813

1 2 3

4 5 6

7 8 9

2 3

5 6

8 9

1 Caterpillar C9 Tier IIIA Engine 247HP (made in USA)

2 LMI safety system on request (made in Netherlands)

3 Boom mounted lightbar with in-cab monitor on request

(made in Netherlands)

4 Paccar Braden winches (made in USA)

5 Bosch/Rexroth hydraulic motors for winches (made in Germany)

6 Left and right re-inforced track frame brackets to minimize stress on track frames (made in Netherlands)

7 Front heavy duty bracket for maximum lifting capacity (made in Netherlands)

8 Hydraulic operated kit lifter to change working range or transport mode (made in Netherlands)

9 Can be transported in one load without dismantling anything

(Designed in Netherlands)

CE marked

Delta 330CL patented pipelayer conversion kit

opmaak330cl .indd 2 09-01-13 15:23

Page 5: Caterpillar 330CL Hydraulic Pipelayer

BASE MACHINE

Caterpillar 330 Excavator CONVERSION KIT

DELTA 330 Hydraulic conversion kit:State of the Art patented design delivers excellent visibilityto the job site which increase operator condifence, comfort, effectiveness and enhanced safety.

CONVERSION KIT IS AVAILABLE ON BRAND NEW AND USED CATERPILLAR 330L/ 330BL/ 330CL/ 330DL/329E ENGINE

Brand : CaterpillarModel : C9Bore : 112.0 mm (4.41 in)Stroke : 149.0 mm (5.87 in)Displacement : 8.8 L (537 in3)Certifi cation rating : 247HP/ 184kWAspiration : TurbochargedEmissions meet : U.S. EPA and EU Stage IIIA Control system ADEM A4 electronic engine controller maximizes fuel effi ciency and performance by maintaining the optimum balance between engine speed and hydraulic demand.

TIPPING CAPACITY

Maximum lift 65.000 kg

OPERATING WEIGHT

36.150 kg

COUNTERWEIGHT

Total weight : 6415 kg / 14,140 lbs

CONTROLS

Fully hydraulic dual joystick controlled

DRIVE

Type : Hydrostatic Max. Drawbar Pull : 294 kN / 66,094 lbMain pumps : Two-speed auto-shift travelBrand : Caterpillar Max fl ow : 280 lit/minFinal drive : Compact design with three stages

planetary production

CAB

Airconditioning : IncludedHeater : IncludedClimate Control : Positive fi ltered ventilation with a

pressurized cabSeat : Air suspension and high visibility Design : Visibility, comfort and easy operation

allows the operator to focus on safe production and increase productivity

Sound performance : Meets OSHA and MSHA requirements

BOOM Frame : Tabular A-Frame boom engineerd

for maximum lift capacity and easy detachment

Length : 7,30 meter2-speed hook block : HIGH - 17 mtr/min, LOW - 8 mtr/min

HYDRAULIC WINCHES Make : Paccar/ Braden, Planetary dual

brake lifting and deriking winch.Hydraulic motors : Bosch/Rexroth 2 speed Hydr.

Piston motorsDiameter wire rope Boom : 3/4 Inch / 19mmDiameter wire rope Load : 3/4 Inch / 19mm

UNDERCARRIAGE Number of bottom rollers : 8Number of carrying rollers : 2Shoes type : Single Grouser / Tripple GrouserStandard shoes width : 610 mm / 24 InchTrack Frames : Heavily reinforced track frame

brackets minimizes stresses in upper frame and swing bearing and optimize stability

FLUID CAPACITIES

Fuel tank : 618 ltr. / 163 gal Hydraulic system circuit : 410 ltr. / 108 galCooling system : 38 ltr. / 10 gal Engine oil : 36 ltr. / 9,4 gal Final drive each : 15 ltr. / 4 gal

OPTIONS • Delta Load Management System for increase effectiveness

and safety • Boom mounted light bar with in-cab monitor and warning

systems to optimize safety • Load Cell • Reverse Camera • Cold Weather Kit • GPS Telemetry System • Optional boom lengths available • Excavator attachments to convert machine to conventional

Caterpillar 330CL excavator

DIMENSIONS Length Width Height

Machine (without boom): 5.930 3.440 3.160 Boom 7.300 1.620 0,700

Total Shipping Volume : 65 m3

FEATURES & BENEFITS 330 Conversion kit: Kit specifi cations have advanced safety features in addition to the updated and market ability of the Caterpillar equipment

3 side working range: It’s confi guration allows the sideboom to operate from the right, left and in the front

Prepare for transportation: Machine can be taken from working- to transport mode in a matter of minutes

Transportation: Can be transported in one load, without dismantling anything from the machine

Multi-axis: Hydraulic joystick allows simultaneous, precise control of the load and boom functions with one hand.

Joysticks: Dual joystick-controlled hydraulic system is easy to operate and requires minimum operators training.

Boom stop: Hydraulic boomstop stops automatically prevents system over travel and boom damage.

Multifunctional:330CL Pipelayer can be converted in a conventional excavator by swapping the boom in a short period of time.

CATERPILLAR 330CL HYDRAULIC PIPELAYER

4040

5020

5930

2590

3440

3160

6230

7880

13350

3440

15050

1399

1279

1159

1038

415

380

344

308

358

351

344

337

1200 1400 1600 1800 2000 2200

EngineTorque lb•ft

EnginePower bhp

BSFClb/bhp-hr

100

90

80

70

60

50

40

30

20

10

0

220

200

180

160

140

120

100

80

60

40

20

1

4 6 8 10 12 14 16 18 20 22 24

1.5 2 3 3.5 4 4.5 5 5.5 6 6.5 72.5

Working RangeISO 8813

lb x1000

kg x1000

M

Ft

Lifti

ng C

apac

ity

Boom Overhang

Max. Lift Capacity PER S.A.E. J743B

Max. Load Capacity ISO 8813

1 2 3

4 5 6

7 8 9

2 3

5 6

8 9

1 Caterpillar C9 Tier IIIA Engine 247HP (made in USA)

2 LMI safety system on request (made in Netherlands)

3 Boom mounted lightbar with in-cab monitor on request

(made in Netherlands)

4 Paccar Braden winches (made in USA)

5 Bosch/Rexroth hydraulic motors for winches (made in Germany)

6 Left and right re-inforced track frame brackets to minimize stress on track frames (made in Netherlands)

7 Front heavy duty bracket for maximum lifting capacity (made in Netherlands)

8 Hydraulic operated kit lifter to change working range or transport mode (made in Netherlands)

9 Can be transported in one load without dismantling anything

(Designed in Netherlands)

CE marked

Delta 330CL patented pipelayer conversion kit

opmaak330cl .indd 2 09-01-13 15:23

Page 6: Caterpillar 330CL Hydraulic Pipelayer

STANDARD EQUIPMENT

Caterpillar 330CL excavator upper and lower structure

• Boom stop (Positive boomstop)• Anti Two Block Device• Center Point Swing Bearing• Automatic Boom Kick-out• Double Security System for Piloting• CE and EPA Certifi ed• TUV Chartered Engineers Certifi cation• High visibility during operation with adjustable higher seat. • Kick out boom• Anti-two block system• Swing Alarm• Back up alarm• Left side joystick safety switch

CATERPILLAR 330CLHYDRAULIC PIPELAYER

Revolutionary state of the art patented design

Dealer:

Disclaimer

The information contained in this brochure is intend to be of a general use only. Delta may at any time for technical or other necessary reasons modify any of the specifi cations mentioned. Illustrations do not necessarily show the product in standard conditions. The dimensions, weights and capacities shown are approximate only and are subjects to variations within normal manufacturing techniques.

CATERPILLAR 330CLHYDRAULIC PIPELAYER

The Netherlands

Delta Machinery

Haven M529, Port of MoerdijkMark S Clarkelaan 64761RK ZevenbergenThe Netherlands

Tel + 31 888 966 966Fax + 31 888 966 950

[email protected]

United Arabic emirates Ras Al Khaimah Machineries LLC Kharran Road, Al fi liyahRas Al KhaimahUnited Arab Emirates

Tel + 971 72289338Fax + 971 72289337

[email protected]

United states of America

Equipment Investco

3340 Greens road, Suite 400Houston TexasUnited states of America

Tel +1281 590 7474Fax +1713 2032444

[email protected]

opmaak330cl .indd 1 09-01-13 15:22