catalystcarriers typicalproperties pf

7/28/2019 CatalystCarriers TypicalProperties Pf

1/4

NorProCatalyst Carriers -- Typical Properties

NorProCatalyst Carriers

IMPORTANT NOTES

The products described in these tables represent only some o the extensive capabilities possessed by Saint-Gobain NorPro to make carrierswith widely varying physical and chemical properties. Please contact Saint-Gobain NorPro directly, or viawww.norpro.saint-gobain.com, i you

do not see your precise requirement listed. We can help you!

SIZE AND SHAPEMost materials are available in a variety of shapes, including spheres, UniSpheres (Saint-Gobain NorPros special mono-sized spheres),extrudates, pellets (cut extrudates), trilobes, rings and pentarings. Other shapes have been designed and manufactured for particularapplications. Some products are not available as spheres.

NOMENCLATUREAll products are coded in the form SA 6173 or SA 55112.

Thesecond letter describes the material:S A alumina or alumina-silicaS C silicon carbideS S silica or silica-aluminaS T titaniaS Z zirconia

Therst digit refers to the surface area: SA5*21 low surface area (100 m2/g)

Thesecond digit refers to the shape:SA 6173 pellets or extrudates

SA 52112 spheres

SA 5397 spray dried materialsSA 5551 ringsSA 66147 pentaringsSA 6973 trilobes; quadrilobes

The last two or three digits are unique to the formulation:SA 6173SA 55112

Samples sent will always be described, not only by the abovecoding, where relevant, but also by a unique sample number, e.g.:2006781234. This number refers to the batch of material made andenables Saint-Gobain NorPro to trace the original formulation, who

made the material, the manufacturing conditions, and all the analyticalresults.


2/4

PROPERTIESTheSURFACE AREA of many products may vary fromthe typical values shown in the tables. The degree ofvariation possible depends upon the material. Surfacearea values may vary with the instrument used formeasurement. Details of Saint-Gobain NorPros

Standard Test Methods are available upon request.

PORE VOLUME values may vary with the instrumentused for measurement. Pore Volume values reportedin these tables are mercury (Hg) intrusion values. Insuitable circumstances nitrogen (N

2) values may be

measured and reported.

TheWATER ABSORPTION is the amount of waterpicked up in open pores during a soaking period,expressed as a percentage of the dry sample weight.This value is obtained using the carefully standardizedSaint-Gobain NorPro Standard Test Method. Bulk(Particle) Density, Apparent Porosity and ApparentSpecic Gravity details are available upon request.

PACKING DENSITY values are approximate and mayvary with particle size and shape.

Saint-Gobain NorPro WorldwideLocations

Saint-Gobain NorPro3840 Fishcreek Road

Stow, OH 44224-5400USATel: +1 330 677 3552Fax: +1 330 677 [email protected]

Saint-Gobain NorPro GmbHAm BahnhofD-56414, SteinefrenzGermany

Tel: +49 6435 9657 25Fax: +49 6435 9657 [email protected]

Saint-Gobain KK3-7, KojimachiChiyoda-ku

Tokyo, 102-0083J apanTel: +81 3 3263 0334Fax: +81 3 3221 9976

[email protected]

w w w . n o r p r o . s a i n t - g o b a i n . c o mSaint-Gobain NorPro 2006

CatCarTypProp 08/11 rev

Contact Saint-Gobain NorPro for details of theirother products: MacroTrapguard bed media,Denstoneceramic bed supports, ceramicpentarings, process ceramics and proppants.

All properties quoted are representative o production at thetime o printing o this leaet. The properties o individual lots or

samples may vary rom these values. These properties are not to beconstrued as specifcations and no warranty is implied or expressed

to this eect.


3/4

ALUMINA BASED CATALYST CARRIERS - TYPICAL PROPERTIES

PRODUCTCODE

DESCRIPTION SURFACEAREA

m2/gm

MEDIAN POREDIAMETER

TOTAL POREVOLUME

(Hg)cm3/g

WATERABSORPTION

%

PACKINGDENSITY

PHASE CHEMICAL PURITY

lb/ft3 kg/m3

Low Surface Area (< 10 m2/g) - Alumina / Silica

SA 5*05 Highly macroporous 0.02 130 m 0.18 27 60 960 / glassy silica 12% SiO2

SA 5*18 Highly macroporous 0.05 75 m 0.24 20 68 1080 / glassy silica 13% SiO2

SA 5*23 Bimodal pore size distribution 0.04 15 / 150 m 0.20 18 77 1240 / glassy silica 11% SiO2

SA 5*21 0.05 20 m 0.25 23 73 1170 / glassy silica 12% SiO2

SA 5*52 0.35 5 m 0.34 32 61 970 / glassy silica 6% SiO2

SA 5*39 Bimodal pore size distribution 0.30 1.8 / 150 m 0.43 45 50 800 / glassy silica 12% SiO2

SA 5*180 MacroTrap media > 1.50 0.7 / 120 m 0.50 (1) > 40 46 740 / glassy silica 6% SiO2

SA 52112 Bauxite microspheres < 0.06 < 0.01 125 2000 bauxite 15% SiO2; 5% Fe

3O

4

NOTES (1) Pore volume > 0.15 cm3/g for pores > 10 m

Low Surface Area (< 10 m2/g) - High Purity Alumina

SA 5*51 0.18 3 m 0.23 25 73 1170 0.3% SiO2

SA 5*61 Bimodal pore size distribution 0.25 3 m 0.25 25 70 1120 0.3% SiO2

SA 5*62 Trimodal pore size distribution 0.75 1 / 10 / 250 m 0.53 50 53 845 0.1% SiO2

SA 5*02 1.0 1.2 m 0.30 29 70 1120 < 0.05% SiO2

SA 5*161 Bimodal pore size distribution(formerly XA 25045)

4.50 0.1 / 11 m 0.35 35 60 960 1% SiO2

SA 5*131 High alumina MacroTrap media > 0.9 1.1 / 40 m > 0.4 (1) > 40 < 50 < 800 < 1% SiO2

SA 53197 Spray-dried (60 - 90 m) 8.00 75 nm 0.22 88 1400 < 0.03% SiO2

SA 52124 UniSpheres 5.00 0.15 m 0.30 65 1040 < 0.1% SiO2

NOTES (1) Pore volume > 0.15 cm3/g for pores > 10 m

Intermediate Surface Area (10 - 100 m2/g)

SA 3*35 Macroporous 12 1.2 m 0.53 59 43 688 / Transition (,) 17.9% SiO2

SA 3*32 Macroporous 30 1.2 m 0.55 60 40 640 / Transition (,) 17.9% SiO2

SA 3*132 Theta alumina 55 25 / 550 nm > 0.8 34 550 Mainly < 0.1% SiO2

SA 31145 Theta alumina 75 20 / 230 nm > 0.55 40 650 Mainly < 0.3% SiO2; < 0.1% Na

2O

SA 3*77 100 (1) 10 nm 0.49 49 780 / Transition (,) 0.1% SiO2

NOTES (1) Surface area 20 - to over 100 m2/g available

High Surface Area (> 100m2/g) - High Purity Alumina

SA 6*73 200 7 nm 0.6 40 640 < 0.05% Na2O

SA 6*75 260 10 nm 0.83 34 545 < 0.05% Na2O

SA 6*76 Bimodal pore size distribution 250 7 / 500 nm 1.05 29 460 < 0.05% Na2O

SA 6*78 175 13 nm 0.82 29 460 , < 0.05% Na2O

SA 62125 UniSpheres 200 8.5 nm 0.6 40 640 < 0.05% Na2OSA 66147 Pentarings 230 8 nm > 0.65 27 430 < 0.05% Na

2O

SA 63158 Spray-dried (60 - 90 m) 200 0.66 43 690 < 0.1% SiO2; < 0.03% Na

2O

Saint-Gobain NorPro www.norpro.saint-gobain.com


4/4

OTHER CATALYST CARRIERS - TYPICAL PROPERTIES

PRODUCTCODE

DESCRIPTION SURFACEAREA

m2/gm

MEDIAN POREDIAMETER

TOTAL POREVOLUME

(Hg)cm3/g

WATERABSORPTION

%

PACKINGDENSITY

PHASE CHEMICAL PURITY

lb/ft3 kg/m3

Zirconia

SZ 3*163 Monoclinic zirconia (formerly XZ 16075) 55 16 / 60 nm > 0.27 80 1280 Monoclinic < 0.2% SiO2

SZ 3*114 Modifed SZ 31163 50 10 / 40 nm 0.30 80 1280 Monoclinic < 0.2% SiO2

SZ 3*108 Modifed SZ 31163 70 10 / 40 nm 0.30 75 1200 Monoclinic < 0.2% SiO2

SZ 3*164 Monoclinic zirconia (formerly XZ 16052) > 85 8 / 60 nm 0.29 70 1160 Monoclinic < 0.2% SiO2

SZ 3*107 Silica doped 95 10 / 40 nm 0.30 75 1200 Monoclinic 5% SiO2(1)

SZ 6*152 Tetragonal 140 3 / 150 nm 0.30 70 1100 Tetragonal 3.3% SiO2

SZ 6*156 Lanthana doped tetragonal 120 5 / 200 nm 0.30 81 1300 Tetragonal 10% La2O

3

SZ 6*157 Yttria doped tetragonal 115 5 / 150 nm 0.33 78 1250 Tetragonal 8% Y2O

3

SZ 6*191 Ceria doped tetragonal 110 4 / 150 nm 0.25 87 1400 Tetragonal 18% CeO2

SZ 6*143 Tungstated (2) 130 5 / 110 nm 0.25 90 1450 Tetragonal 18% WO3

SZ 6*192 Sulfated 130 40 nm 0.12 (N2) 94 1500 Tetragonal 4% SO

3; 5% SiO

2

SZ 3*140 Zirconia / titania 80 11 / 16 / 121 nm 0.46 50 815 Mono / Tetrag 40% anatase TiO2

NOTES (1) Other silica levels and dopants available

Titania

ST 5*122 Rutile (1) 3 > 160 nm > 0.15 95 1500 > 95% Rutile < 100 ppm S

ST 3*119 Anatase (2) 40 28 nm 0.30 70 1200 Anatase < 0.3% S

ST 6*120 Anatase 150 15 nm 0.38 55 900 Anatase < 0.3% S

NOTES (1) Higher surface areas are available with > 95% rutile content (2) Surface areas 40 - 150 m2/g available

Silica

SS 6*137 HSA silica 160 11 nm 0.6 39 630 +99.5% SiO2

SS 6*138 HSA silica 250 12 nm 1.0 22 350 +99.5% SiO2

SS 6*155 Silica - alumina > 400 8 / 500 nm 0.6 34 550 Mainly amorphous 25% Al2

O3

; 0.35% Na2

O

Silicon Carbide

SC 5*32 LSA silicon carbide 0.15 22 m 0.27 27 60 960 13% SiO2

SC 5*167 Enhanced porosity (formerly XC 69374) 0.3 24 m 0.55 55 35 560 16% SiO2

NOTES (1) Pore diameter may be adjusted 7 - 60

Other Materials

SA 6*169 JR 323 Basic alumina (formerly CRR*RDA) 250 0.11 m 1.0 115 25 400 Modifed alumina 4.5% CaO; 1% MgO; 0.5% SiO2

SA 56111 Ceramic pentarings (bed topping)10; 13; 19; 25mm diameter available

0.02 < 1 55 880 SiO2

/ Al2O

3; 2.4/1

Saint-Gobain NorPro www.norpro.saint-gobain.com

08/11 rev

catalystcarriers typicalproperties pf

Documents