catalogue spare parts and accessories for nox, so2 and nh3 … · 2019-12-17 · the spare part and...
TRANSCRIPT
MES 1001 spare parts and accessories catalogue
2 | © Danfoss IXA A/S | 2019.12 Danfoss IXA doc. no. 100058-CAT Rev. B
IXA
Table of contents
1. Introduction 3 1.1. Purpose of the manual 3 1.2. Abbreviations and definitions 3 2. Spare parts and accessories 4 Notes 13
MES 1001 spare parts and accessories catalogue
Danfoss IXA A/S | 2019.12 | 3Danfoss IXA doc. no. 100058-CAT Rev. B
IXA
1. Introduction
1.1. Purpose of the manual
The Spare Part and Accessories Catalogue provides information required to order spare parts and accessories for the marine emission sensor 1001 – MES 1001. Please be aware of the details in ordering the parts since some of the parts have different revisions and some parts have variants. It is recommended to download the Marine Emission Sensor Installation Guide and Marine Emission Sensor User Guide from the Danfoss IXA website if not already available on the vessel.
Other available resources:• Marine Emission Sensor Data Sheet (100300-DSH)• Marine Emission Sensor Installation Guide (100310-MAN)• Marine Emission Sensor User Guide (100320-MAN)
1.2. Abbreviations and definitions
Abbreviation Description
DIN Deutsche Industrie Norm
LAN Local Area Network
UV Ultraviolet
Table 1: Abbreviations
MES 1001 spare parts and accessories catalogue
4 | © Danfoss IXA A/S | 2019.12 Danfoss IXA doc. no. 100058-CAT Rev. B
IXA
2. Spare parts and accessories
APPLIES TO MES 1001 sensors with revision C
ORDERING INFO Description Part no. Comment
Spare lamp 930000-001 Please note that there are two versions of the lamp for sensor revision C. They have slightly different apperarances. They are fully interchangeable!Please always inform about sensor serial number and revision when ordering spare lamps.
APPLIES TO MES 1001 sensors with revision D
ORDERING INFO Description Part no. Comment
Spare lamp 930000-002 Please note that there are two versions of the lamp for sensor revision D. They have slightly different apperarances. They are fully interchangeable! Please always inform about sensor serial number and revision when ordering spare lamps.
MES 1001 spare parts and accessories catalogue
Danfoss IXA A/S | 2019.12 | 5Danfoss IXA doc. no. 100058-CAT Rev. B
IXA
APPLIES TO MES 1001 sensors with revision E
ORDERING INFO Description Part no. Comment
Spare lamp 930000-003 Please note that there are two versions of the lamp for sensor revision E. They have slightly different apperarances. They are fully interchangeable! Please always inform about sensor serial number and revision when ordering spare lamps.
APPLIES TO Spare parts 930003 and 930004
ORDERING INFO
Description Part no. Comment
Filter element (set)
930001 Spare filter elements for air filters. Set of two filters fitting one filter unit.
MES 1001 spare parts and accessories catalogue
6 | © Danfoss IXA A/S | 2019.12 Danfoss IXA doc. no. 100058-CAT Rev. B
IXA
APPLIES TO MES 1001
ORDERING INFO Description Part no. Comment
Refill set for optics cleaning kit
930002 The refill set includes cleaning tissue, o-ring, screws, washers, gaskets, anti-stick lube, optics cleaning liquid and data sheets.
APPLIES TO MES 1001
ORDERING INFO Description Part no. Comment
Air filter 930003 Filter for compressed air supply. Max. supply pressure 10barG. For higher supply pres-sures please order 930004. Spare filter inserts to be ordered separately: IXA Part no. 930001.
MES 1001 spare parts and accessories catalogue
Danfoss IXA A/S | 2019.12 | 7Danfoss IXA doc. no. 100058-CAT Rev. B
IXA
APPLIES TO MES 1001
ORDERING INFO Description Part no. Comment
Air filter with pressure regu-lator gauge
930004 Air Filter with pressure regulator and gauge for decreasing compressed air supply above 10 barG. Spare filter inserts to be ordered separately: IXA Part no. 930001.
APPLIES TO MES 1001
ORDERING INFO
Description Part no. Comment
Flange kit 930005 The flange kit contains a flange for welding onto the exhaustgas pipe, a gasket and a counterflange.Bolts must be supplied by the customer (M16x65).
MES 1001 spare parts and accessories catalogue
8 | © Danfoss IXA A/S | 2019.12 Danfoss IXA doc. no. 100058-CAT Rev. B
IXA
APPLIES TO MES 1001
ORDERING INFO Description Part no. Comment
Braided Com-pressed Air Hose
930006-008 For connecting compressed air supply from air filter to sensor. Length 0.8 m.
Braided Com-pressed Air Hose
930006-015 For connecting compressed air supply from air filter to sensor. Length 1.5 m.
Braided Com-pressed Air Hose
930006-030 For connecting compressed air supply from air filter to sensor. Length 3.0 m.
APPLIES TO MES 1001
ORDERING INFO Description Part no. Comment
Analog signals connector
930007 Connector for analog signals on gas concentrations to engine or SCR controls. Pin assign-ment leaflet included in package. Please order also 930040 for cables with cable Ø > 10 mm or conductor Ø > 0.75 mm sq.
MES 1001 spare parts and accessories catalogue
Danfoss IXA A/S | 2019.12 | 9Danfoss IXA doc. no. 100058-CAT Rev. B
IXA
APPLIES TO MES 1001
ORDERING INFO Description Part no. Comment
Digital in/out connector
930008 Connector for digital in and out signals. Pin assignment leaflet included in package. Please order also 930040 for cables with cable Ø > 10 mm or conductor Ø > 0.75 mm sq.
APPLIES TO MES 1001
ORDERING INFO
Description Part no. Comment
Power connector
930009 All sub-components of the connector included in package. Pin assignment leaflet also included. For power cables with cable Ø > 17.5 mm or con-ductor Ø > 2.5 mm sq please order 930038 and 930039.
MES 1001 spare parts and accessories catalogue
10 | © Danfoss IXA A/S | 2019.12 Danfoss IXA doc. no. 100058-CAT Rev. B
IXA
APPLIES TO MES 1001
ORDERING INFO Description Part no. Comment
Connector, LAN, Lockable
930010 Lockable LAN connector must always be used to ensure reliable connection! For MOD-BUS connection also.
APPLIES TO MES 1001
ORDERING INFO Description Part no. Comment
Optics Cleaning Kit
100488-001 The Optics Cleaning Kit contains everything you need for cleaning the optics in the MES 1001 sensor, including an optics cleaning instruction.
MES 1001 spare parts and accessories catalogue
Danfoss IXA A/S | 2019.12 | 11Danfoss IXA doc. no. 100058-CAT Rev. B
IXA
APPLIES TO MES 1001
ORDERING INFO Description Part no. Comment
Power connector male
930038 Order this part along with 9300039 and 930009 for power cables with cable Ø > 17.5 mm or conductor Ø > 2.5 mm sq.
APPLIES TO MES 1001
ORDERING INFO
Description Part no. Comment
Power connector female
930039 Order this part along with 9300038 and 930009 for power cables with cable Ø > 17 mm or conductor Ø > 2.5 mm sq.
MES 1001 spare parts and accessories catalogue
12 | © Danfoss IXA A/S | 2019.12 Danfoss IXA doc. no. 100058-CAT Rev. B
IXA
APPLIES TO MES 1001
ORDERING INFO Description Part no. Comment
Analog signals connector
930040 Order this part for digital and analog signal cables with cable Ø > 10 mm or conductor Ø > 0.75 mm sq. Please also order number 930007 or 930008.
APPLIES TO MES 1001
ORDERING INFO Description Part no. Comment
Fitting and gasket
930041 Order this part number for change to G1/4” male connection for Air Filter and Air Filter with Pressure Regulator and Gauge.
MES 1001 spare parts and accessories catalogue
Danfoss IXA A/S | 2019.12 | 13Danfoss IXA doc. no. 100058-CAT Rev. B
IXA
Notes
Danfoss IXA A/S, part of the Danfoss Group, is a leading player in certified marine emission monitoring solutions. We develop sensors and systems, and our innovative sensors precisely and continuously measure climate parameters and environmentally harmful gases, providing documentation of regulatory compliance and essential input for energy optimization.
We are engineering a more sustainable shipping industry.
Maritime expertise across divisionsTo serve the marine industry in the best possible way, several Danfoss divisions bring a particular range of technical know-how and benefits on board. On their own, each division is at the forefront of its field with industry-leading insight and innovation. Working together, the Danfoss divisions form a comprehensive array of components that help major ships around the world ashore safely and on-time.
Learn more at marine.danfoss.com
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alternations can be made without subsequential changes being necessary in specification already agreed. All trademarks in this material area property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
Copyright Danfoss | 2019.03Danfoss IXA doc. no. 100721-BRO Rev. A
Danfoss IXA · Ulvehavevej 61 · DK-7100 Vejle Tel. +45 74888500 · E-mail [email protected] · danfoss-ixa.com
One solution provider ofemission monitoring in themaritime industry
IXA
Danfoss IXA doc. no. 100058-CAT Rev. B © Danfoss IXA A/S | 2019.12