catalogueAluminium TrAde CenTre Pty Ltd

Aluminium TrAde CenTre Pty Ltd

Aluminium has been sold continuously from this site since the 1970’s when Comalco was based here. Our mission is to make buying aluminium and related products fast, easy and economical.

n Our website - Australia’s first online metal store - has been designed so you can browse, order exactly what you need and have it delivered promptly to your home or work site.

n Our showroom is set up with samples of our entire range laid out on shelves so you can pick up and handle them.

n We will sell you small quantities and off cuts.

n We cut to size on the spot and can do mitre cuts on request.

n We are open on Saturday mornings.

n Our unique hardware range is handpicked for the aluminium in-dustry.

n Our pricing is unbeatable.

ATC ShowroomOpen to the public & trade customers2127 Dandenong Rd, Clayton

Mon – Fri 8.00 am – 4.30 pmSat 9.30 am–12.00 pm

3

STANDARD EXTRUSIONSSTAndArd eXTruSiOnS Angle 4 Mill Finish 4 Anodised 9 Powder Coated 12 Channel 13 Mill Finish 13 Anodised 17 drawn tube 19 Mill Finish 19 Anodised 20 Flat Bar 20 Mill Finish 20 Anodised 24 machine Bar 26 rectangular Hollow 26

Mill Finish 26 Anodised 29 round Bar 30 round Tube 31 Square Bar 33 Square Hollow 34 Tee 36

SHeeT & PlATe Flat Sheet 38 Propeller Plate 39

Stucco Plate 40 Tread / Chequer Plate 40

ArCHiTeCTurAl Coolroom 41 Flyscreen 42 Glazing 43 louvre 44 miscellaneous Shapes 45 Qubelok 51 Security 53

SCAFFOld PlAnkS 56

HArdWAre 57

TeCHniCAl inFOrmATiOn 63

contents

4

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

AnGle mill Finish

Angle - 12 x 12 x 1.6 - Mill Finish ANG012x12x1.6MF 6060 T5 Mill Finish 12 12 1.6 6500 mm 0.500

Angle - 12 x 12 x 3 - Mill Finish ANG012x12x3MF 6060 T5 Mill Finish 12 12 3 6500 mm 0.500

Angle - 16 x 16 x 1.6 - Mill Finish ANG016x16x1.6MF 6060 T5 Mill Finish 16 16 1.6 6500 mm 0.500

Angle - 16 x 16 x 3 - Mill Finish ANG016x16x3MF 6060 T5 Mill Finish 16 16 3 6500 mm 0.500

Angle - 20 x 12 x 1.6 - Mill Finish ANG020x12x1.6MF 6060 T5 Mill Finish 20 12 1.6 6500 mm 0.500

Angle - 20 x 12 x 3 - Mill Finish ANG020x12x3MF 6060 T5 Mill Finish 20 12 3 6500 mm 0.500

Angle - 20 x 20 x 1.6 - Mill Finish ANG020x20x1.6MF 6060 T5 Mill Finish 20 20 1.6 6500 mm 0.500

Angle - 20 x 20 x 3 - Mill Finish ANG020x20x3MF 6060 T5 Mill Finish 20 20 3 6500 mm 0.500

Angle Fluted - 25.4 x 25.4 x 1.57 - Mill Finish ANG025.4x25.4x1.57MF-FLU 6060 T1 Mill Finish 25.4 25.4 1.57 4000 mm 0.500

Angle - 25 x 12 x 1.6 - Mill Finish ANG025x12x1.6MF 6060 T5 Mill Finish 25 12 1.6 6500 mm 0.500

Angle - 25 x 12 x 3 - Mill Finish ANG025x12x3MF 6060 T5 Mill Finish 25 12 3 6500 mm 0.500

Angle - 25 x 20 x 1.6 - Mill Finish ANG025x20x1.6MF 6060 T5 Mill Finish 25 20 1.6 6500 mm 0.500

Angle - 25 x 20 x 3 - Mill Finish ANG025x20x3MF 6060 T5 Mill Finish 25 20 3 6500 mm 0.500

Angle - 25 x 25 x 1.6 - Mill Finish ANG025x25x1.6MF 6060 T5 Mill Finish 25 25 1.6 6500 mm 0.500

5

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Angle - 25 x 25 x 3 - Mill Finish ANG025x25x3MF 6060 T5 Mill Finish 25 25 3 6500 mm 0.250

Angle - 25 x 25 x 6 - Mill Finish ANG025x25x6MF 6060 T5 Mill Finish 25 25 6 6500 mm 0.250

Angle - 32 x 20 x 1.6 - Mill Finish ANG032x20x1.6MF 6060 T5 Mill Finish 32 20 1.6 6500 mm 0.500

Angle - 32 x 20 x 3 - Mill Finish ANG032x20x3MF 6060 T5 Mill Finish 32 20 3 6500 mm 0.500

Angle - 32 x 25 x 3 - Mill Finish ANG032x25x3MF 6060 T5 Mill Finish 32 25 3 6500 mm 0.250

Angle - 32 x 32 x 1.6 - Mill Finish ANG032x32x1.6MF 6060 T5 Mill Finish 32 32 1.6 6500 mm 0.500

Angle - 32 x 32 x 3 - Mill Finish ANG032x32x3MF 6060 T5 Mill Finish 32 32 3 6500 mm 0.250

Angle - 40 x 12 x 1.6 - Mill Finish ANG040x12x1.6MF 6060 T5 Mill Finish 40 12 1.6 6500 mm 0.500

Angle - 40 x 12 x 3 - Mill Finish ANG040x12x3MF 6060 T5 Mill Finish 40 12 3 6500 mm 0.250

Angle - 40 x 20 x 1.6 - Mill Finish ANG040x20x1.6MF 6060 T5 Mill Finish 40 20 1.6 6500 mm 0.500

Angle - 40 x 20 x 3 - Mill Finish ANG040x20x3MF 6060 T5 Mill Finish 40 20 3 6500 mm 0.250

Angle - 40 x 25 x 1.6 - Mill Finish ANG040x25x1.6MF 6060 T5 Mill Finish 40 25 1.6 6500 mm 0.500

Angle - 40 x 25 x 3 - Mill Finish ANG040x25x3MF 6060 T5 Mill Finish 40 25 3 6500 mm 0.250

Angle - 40 x 40 x 1.6 - Mill Finish ANG040x40x1.6MF 6060 T5 Mill Finish 40 40 1.6 6500 mm 0.500

Angle - 40 x 40 x 3 - Mill Finish ANG040x40x3MF 6060 T5 Mill Finish 40 40 3 6500 mm 0.250

Angle - 40 x 40 x 4 - Mill Finish ANG040x40x4MF 6060 T5 Mill Finish 40 40 4 6500 mm 0.250

6

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Angle - 40 x 40 x 6 - Mill Finish ANG040x40x6MF 6060 T5 Mill Finish 40 40 6 6500 mm 0.125

Angle - 50.8 x 50.8 x 6.35 - Mill Finish - Int. Radius

6.1mmANG050.8x50.8x6.35RMF 6061 T6 Mill Finish 50.8 50.8 6.35 5500 mm 0.125

Angle - 50 x 12 x 3 - Mill Finish ANG050x12x3MF 6060 T5 Mill Finish 50 12 3 6500 mm 0.250

Angle - 50 x 20 x 1.6 - Mill Finish ANG050x20x1.6MF 6060 T5 Mill Finish 50 20 1.6 6500 mm 0.500

Angle - 50 x 20 x 3 - Mill Finish ANG050x20x3MF 6060 T5 Mill Finish 50 20 3 6500 mm 0.250

Angle - 50 x 25 x 1.6 - Mill Finish ANG050x25x1.6MF 6060 T5 Mill Finish 50 25 1.6 6500 mm 0.500

Angle - 50 x 25 x 3 - Mill Finish ANG050x25x3MF 6060 T5 Mill Finish 50 25 3 6500 mm 0.250

Angle - 50 x 40 x 3 - Mill Finish ANG050x40x3MF 6060 T5 Mill Finish 50 40 3 6500 mm 0.250

Angle - 50 x 50 x 1.6 - Mill Finish ANG050x50x1.6MF 6060 T5 Mill Finish 50 50 1.6 6500 mm 0.250

Angle - 50 x 50 x 3 - Mill Finish ANG050x50x3MF 6060 T5 Mill Finish 50 50 3 6500 mm 0.250

Angle - 50 x 50 x 4 - Mill Finish ANG050x50x4MF 6060 T5 Mill Finish 50 50 4 6500 mm 0.250

Angle - 50 x 50 x 6 - Mill Finish ANG050x50x6MF 6060 T5 Mill Finish 50 50 6 6500 mm 0.125

Angle - 60 x 25 x 3 - Mill Finish ANG060x25x3MF 6060 T5 Mill Finish 60 25 3 6500 mm 0.250

Angle - 60 x 40 x 4 - Mill Finish ANG060x40x4MF 6060 T5 Mill Finish 60 40 4 6500 mm 0.250

Angle - 60 x 60 x 3 - Mill Finish ANG060x60x3MF 6060 T5 Mill Finish 60 60 3 6500 mm 0.250

7

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Angle - 60 x 60 x 6 - Mill Finish ANG060x60x6MF 6060 T5 Mill Finish 60 60 6 6500 mm 0.125

Angle - 70 x 20 x 1.6 - Mill Finish ANG070x20x1.6MF 6060 T5 Mill Finish 70 20 1.6 6500 mm 0.250

Angle - 70 x 25 x 1.6 - Mill Finish ANG070x25x1.6MF 6060 T5 Mill Finish 70 25 1.6 6500 mm 0.250

Angle - 70 x 40 x 1.6 - Mill Finish ANG070x40x1.6MF 6060 T5 Mill Finish 70 40 1.6 6500 mm 0.250

Angle - 76.2 x 25.4 x 3.2 - Mill Finish ANG076.2x25.4x3.2MF 6060 T5 Mill Finish 76.2 25.4 3.2 6500 mm 0.250

Angle - 76.2 x 50.8 x 6.35 - Mill Finish - Int. Radius

6.8mmANG076.2x50.8x6.35RMF 6061 T6 Mill Finish 76.2 50.8 6.35 5500 mm 0.125

Angle - 76.2 x 50.8 x 6.35 - Mill Finish - Int. Radius

6.8mmANG076.2x50.8x6.35RMF-6.8 6005A T5 Mill Finish 76.2 50.8 6.35 6800 mm 0.125

Angle - 76.2 x 76.2 x 3.2 - Mill Finish ANG076.2x76.2x3.2MF 6060 T5 Mill Finish 76.2 76.2 3.2 6500 mm 0.125

Angle - 76.2 x 76.2 x 9.52 - Mill Finish - Int. Radius

7.62mmANG076.2x76.2x9.52RMF 6061 T6 Mill Finish 76.2 76.2 9.52 5500 mm 0.125

Angle - 76 x 25 x 1.6 - Mill Finish ANG076x25x1.6MF 6060 T5 Mill Finish 76 25 1.6 6500 mm 0.250

Angle - 80 x 20 x 3 - Mill Finish ANG080x20x3MF 6060 T5 Mill Finish 80 20 3 6500 mm 0.250

Angle - 80 x 40 x 6 - Mill Finish ANG080x40x6MF 6060 T5 Mill Finish 80 40 6 6500 mm 0.125

Angle - 80 x 50 x 2.5 - Mill Finish ANG080x50x2.5MF 6060 T5 Mill Finish 80 50 2.5 6500 mm 0.250

Angle - 80 x 50 x 6 - Mill Finish - Int. Radius 4mm ANG080x50x6RMF 6061 T6 Mill Finish 80 50 6 6000 mm 0.125

8

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Angle - 80 x 80 x 10 - Mill Finish - Int. Radius 6mm ANG080x80x10RMF 6061 T6 Mill Finish 80 80 10 6000 mm 0.125

Angle - 80 x 80 x 6 - Mill Finish ANG080x80x6MF 6060 T5 Mill Finish 80 80 6 6500 mm 0.125

Angle - 90 x 40 x 1.6 - Mill Finish ANG090x40x1.6MF 6060 T5 Mill Finish 90 40 1.6 6500 mm 0.250

Angle - 100 x 50 x 3 - Mill Finish ANG100x050x3MF 6060 T5 Mill Finish 100 50 3 6500 mm 0.125

Angle - 100 x 50 x 4 - Mill Finish ANG100x050x4MF 6060 T5 Mill Finish 100 50 4 6500 mm 0.125

Angle - 100 x 50 x 6 - Mill Finish - Int. Radius 4mm ANG100x050x6RMF 6061 T6 Mill Finish 100 50 6 6000 mm 0.125

Angle - 100 x 100 x 2 - Mill Finish ANG100x100x2MF 6060 T5 Mill Finish 100 100 2 6500 mm 0.250

Angle - 100 x 100 x 8 - Mill Finish - Int. Radius 6mm ANG100x100x8RMF 6061 T6 Mill Finish 100 100 8 6000 mm 0.125

Angle - 101.6 x 50.8 x 3.2 - Mill Finish ANG101.6x050.8x3.20MF 6060 T5 Mill Finish 101.6 50.8 3.2 6000 mm 0.250

Angle - 101.6 x 101.6 x 6.35 - Mill Finish ANG101.6x101.6x6.35MF 6351 T6 Mill Finish 101.6 101.6 6.35 5500 mm 0.125

Angle - 125 x 50 x 3 - Mill Finish ANG125x50x3MF 6060 T5 Mill Finish 125 50 3 6500 mm 0.125

Angle - 125 x 50 x 6 - Mill Finish - Int. Radius 4mm ANG125x50x6RMF 6061 T6 Mill Finish 125 50 6 6000 mm 0.125

Angle - 250 x 50 x 3 - Mill Finish ANG250x50x3MF 6060 T5 Mill Finish 250 50 3 6500 mm 0.125

9

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

AnGle Anodised

Angle - 12 x 12 x 1.6 - 15um Clear Anodised ANG012x12x1.6AN 6060 T5 Clear Anodised 15um 12 12 1.6 6500 mm 0.500

Angle - 12 x 12 x 3 - 15um Clear Anodised ANG012x12x3AN 6060 T5 Clear Anodised 15um 12 12 3 6500 mm 0.500

Angle - 16 x 16 x 1.6 - 15um Clear Anodised ANG016x16x1.6AN 6060 T5 Clear Anodised 15um 16 16 1.6 6500 mm 0.500

Angle - 16 x 16 x 3 - 15um Clear Anodised ANG016x16x3AN 6060 T5 Clear Anodised 15um 16 16 3 6500 mm 0.500

Angle - 20 x 12 x 1.6 - 15um Clear Anodised ANG020x12x1.6AN 6060 T5 Clear Anodised 15um 20 12 1.6 6500 mm 0.500

Angle - 20 x 12 x 3 - 15um Clear Anodised ANG020x12x3AN 6060 T5 Clear Anodised 15um 20 12 3 6500 mm 0.500

Angle - 20 x 20 x 1.6 - 15um Clear Anodised ANG020x20x1.6AN 6060 T5 Clear Anodised 15um 20 20 1.6 6500 mm 0.500

Angle - 20 x 20 x 3 - 15um Clear Anodised ANG020x20x3AN 6060 T5 Clear Anodised 15um 20 20 3 6500 mm 0.250

Angle - 25 x 12 x 1.6 - 15um Clear Anodised ANG025x12x1.6AN 6060 T5 Clear Anodised 15um 25 12 1.6 6500 mm 0.500

Angle - 25 x 12 x 3 - 15um Clear Anodised ANG025x12x3AN 6060 T5 Clear Anodised 15um 25 12 3 6500 mm 0.250

Angle - 25 x 20 x 1.6 - 15um Clear Anodised ANG025x20x1.6AN 6060 T5 Clear Anodised 15um 25 20 1.6 6500 mm 0.500

Angle - 25 x 20 x 3 - 15um Clear Anodised ANG025x20x3AN 6060 T5 Clear Anodised 15um 25 20 3 6500 mm 0.250

Angle - 25 x 25 x 1.6 - 15um Clear Anodised ANG025x25x1.6AN 6060 T5 Clear Anodised 15um 25 25 1.6 6500 mm 0.500

Angle - 25 x 25 x 3 - 15um Clear Anodised ANG025x25x3AN 6060 T5 Clear Anodised 15um 25 25 3 6500 mm 0.250

Angle - 32 x 20 x 1.6 - 15um Clear Anodised ANG032x20x1.6AN 6060 T5 Clear Anodised 15um 32 20 1.6 6500 mm 0.250

10

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Angle - 32 x 20 x 3 - 15um Clear Anodised ANG032x20x3AN 6060 T5 Clear Anodised 15um 32 20 3 6500 mm 0.250

Angle - 32 x 25 x 3 - 15um Clear Anodised ANG032x25x3AN 6060 T5 Clear Anodised 15um 32 25 3 6500 mm 0.250

Angle - 32 x 32 x 1.6 - 15um Clear Anodised ANG032x32x1.6AN 6060 T5 Clear Anodised 15um 32 32 1.6 6500 mm 0.250

Angle - 32 x 32 x 3 - 15um Clear Anodised ANG032x32x3AN 6060 T5 Clear Anodised 15um 32 32 3 6500 mm 0.250

Angle - 40 x 12 x 1.6 - 15um Clear Anodised ANG040x12x1.6AN 6060 T5 Clear Anodised 15um 40 12 1.6 6500 mm 0.250

Angle - 40 x 12 x 3 - 15um Clear Anodised ANG040x12x3AN 6060 T5 Clear Anodised 15um 40 12 3 6500 mm 0.250

Angle - 40 x 20 x 1.6 - 15um Clear Anodised ANG040x20x1.6AN 6060 T5 Clear Anodised 15um 40 20 1.6 6500 mm 0.250

Angle - 40 x 20 x 3 - 15um Clear Anodised ANG040x20x3AN 6060 T5 Clear Anodised 15um 40 20 3 6500 mm 0.250

Angle - 40 x 25 x 1.6 - 15um Clear Anodised ANG040x25x1.6AN 6060 T5 Clear Anodised 15um 40 25 1.6 6500 mm 0.250

Angle - 40 x 25 x 3 - 15um Clear Anodised ANG040x25x3AN 6060 T5 Clear Anodised 15um 40 25 3 6500 mm 0.250

Angle - 40 x 40 x 1.6 - 15um Clear Anodised ANG040x40x1.6AN 6060 T5 Clear Anodised 15um 40 40 1.6 6500 mm 0.250

Angle - 40 x 40 x 3 - 15um Clear Anodised ANG040x40x3AN 6060 T5 Clear Anodised 15um 40 40 3 6500 mm 0.250

Angle - 40 x 40 x 4 - 15um Clear Anodised ANG040x40x4AN 6060 T5 Clear Anodised 15um 40 40 4 6500 mm 0.250

Angle - 50 x 12 x 3 - 15um Clear Anodised ANG050x12x3AN 6060 T5 Clear Anodised 15um 50 12 3 6500 mm 0.250

Angle - 50 x 20 x 1.6 - 15um Clear Anodised ANG050x20x1.6AN 6060 T5 Clear Anodised 15um 50 20 1.6 6500 mm 0.250

11

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Angle - 50 x 20 x 3 - 15um Clear Anodised ANG050x20x3AN 6060 T5 Clear Anodised 15um 50 20 3 6500 mm 0.250

Angle - 50 x 25 x 1.6 - 15um Clear Anodised ANG050x25x1.6AN 6060 T5 Clear Anodised 15um 50 25 1.6 6500 mm 0.250

Angle - 50 x 25 x 3 - 15um Clear Anodised ANG050x25x3AN 6060 T5 Clear Anodised 15um 50 25 3 6500 mm 0.250

Angle - 50 x 40 x 3 - 15um Clear Anodised ANG050x40x3AN 6060 T5 Clear Anodised 15um 50 40 3 6500 mm 0.250

Angle - 50 x 50 x 1.6 - 15um Clear Anodised ANG050x50x1.6AN 6060 T5 Clear Anodised 15um 50 50 1.6 6500 mm 0.250

Angle - 50 x 50 x 3 - 15um Clear Anodised ANG050x50x3AN 6060 T5 Clear Anodised 15um 50 50 3 6500 mm 0.250

Angle - 50 x 50 x 4 - 15um Clear Anodised ANG050x50x4AN 6060 T5 Clear Anodised 15um 50 50 4 6500 mm 0.250

Angle - 50 x 50 x 6 - 15um Clear Anodised ANG050x50x6AN 6060 T5 Clear Anodised 15um 50 50 6 6500 mm 0.125

Angle - 60 x 25 x 3 - 15um Clear Anodised ANG060x25x3AN 6060 T5 Clear Anodised 15um 60 25 3 6500 mm 0.250

Angle - 60 x 60 x 3 - 15um Clear Anodised ANG060x60x3AN 6060 T5 Clear Anodised 15um 60 60 3 6500 mm 0.250

Angle - 70 x 20 x 1.6 - 15um Clear Anodised ANG070x20x1.6AN 6060 T5 Clear Anodised 15um 70 20 1.6 6500 mm 0.250

Angle - 70 x 25 x 1.6 - 15um Clear Anodised ANG070x25x1.6AN 6060 T5 Clear Anodised 15um 70 25 1.6 6500 mm 0.250

Angle - 70 x 40 x 1.6 - 15um Clear Anodised ANG070x40x1.6AN 6060 T5 Clear Anodised 15um 70 40 1.6 6500 mm 0.250

Angle - 76.2 x 25.4 x 3.2 - 15um Clear Anodised ANG076.2x25.4x3.2AN 6060 T5 Clear Anodised 15um 76.2 25.4 3.2 6500 mm 0.250

Angle - 76.2 x 76.2 x 3.2 - 15um Clear Anodised ANG076.2x76.2x3.2AN 6060 T5 Clear Anodised 15um 76.2 76.2 3.2 6500 mm 0.125

12

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Angle - 76 x 25 x 1.6 - 15um Clear Anodised ANG076x25x1.6AN 6060 T5 Clear Anodised 15um 76 25 1.6 6500 mm 0.250

Angle - 80 x 20 x 3 - 15um Clear Anodised ANG080x20x3AN 6060 T5 Clear Anodised 15um 80 20 3 6500 mm 0.250

Angle - 80 x 50 x 2.5 - 15um Clear Anodised ANG080x50x2.5AN 6060 T5 Clear Anodised 15um 80 50 2.5 6500 mm 0.250

Angle - 90 x 40 x 1.6 - 15um Clear Anodised ANG090x40x1.6AN 6060 T5 Clear Anodised 15um 90 40 1.6 6500 mm 0.250

Angle - 100 x 50 x 3 - 15um Clear Anodised ANG100x050x3AN 6060 T5 Clear Anodised 15um 100 50 3 6500 mm 0.125

AnGle Powder Coated

Angle - 12 x 12 x 1.6 - PC - Black ANG012x12x1.6PC-NS 6060 T5 Black Powder

Coated 12 12 1.6 6500 mm 0.500

Angle - 12 x 12 x 1.6 - PC - White ANG012x12x1.6PC-PW 6060 T5 White Powder

Coated 12 12 1.6 6500 mm 0.500

Angle - 20 x 12 x 1.6 - PC - Black ANG020x12x1.6PC-NS 6060 T5 Black Powder

Coated 20 12 1.6 6500 mm 0.500

Angle - 20 x 12 x 1.6 - PC - White ANG020x12x1.6PC-PW 6060 T5 White Powder

Coated 20 12 1.6 6500 mm 0.500

Angle - 20 x 20 x 1.6 - PC - White ANG020x20x1.6PC-PW 6060 T5 White Powder

Coated 20 20 1.6 6500 mm 0.500

Angle - 25 x 12 x 1.6 - PC - Black ANG025x12x1.6PC-NS 6060 T5 Black Powder

Coated 25 12 1.6 6500 mm 0.500

Angle - 25 x 20 x 1.6 - PC - Black ANG025x20x1.6PC-NS 6060 T5 Black Powder

Coated 25 20 1.6 6500 mm 0.500

Angle - 25 x 20 x 1.6 - PC - White ANG025x20x1.6PC-PW 6060 T5 White Powder

Coated 25 20 1.6 6500 mm 0.500

Angle - 32 x 20 x 1.6 - PC - Black ANG032x20x1.6PC-NS 6060 T5 Black Powder

Coated 32 20 1.6 6500 mm 0.500

Angle - 32 x 20 x 1.6 - PC - White ANG032x20x1.6PC-PW 6060 T5 White Powder

Coated 32 20 1.6 6500 mm 0.500

13

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Angle - 40 x 20 x 1.6 - PC - Black ANG040x20x1.6PC-NS 6060 T5 Black Powder

Coated 40 20 1.6 6500 mm 0.500

Angle - 40 x 20 x 1.6 - PC - White ANG040x20x1.6PC-PW 6060 T5 White Powder

Coated 40 20 1.6 6500 mm 0.500

Angle - 50 x 20 x 1.6 - PC - Black ANG050x20x1.6PC-NS 6060 T5 Black Powder

Coated 50 20 1.6 6500 mm 0.250

Angle - 50 x 20 x 1.6 - PC - White ANG050x20x1.6PC-PW 6060 T5 White Powder

Coated 50 20 1.6 6500 mm 0.250

Angle - 50 x 50 x 1.6 - PC - Black ANG050x50x1.6PC-NS 6060 T5 Black Powder

Coated 50 50 1.6 6500 mm 0.250

Angle - 50 x 50 x 1.6 - PC - White ANG050x50x1.6PC-PW 6060 T5 White Powder

Coated 50 50 1.6 6500 mm 0.250

Angle - 70 x 20 x 1.6 - PC - Black ANG070x20x1.6PC-NS 6060 T5 Black Powder

Coated 70 20 1.6 6500 mm 0.250

Angle - 70 x 20 x 1.6 - PC - White ANG070x20x1.6PC-PW 6060 T5 White Powder

Coated 70 20 1.6 6500 mm 0.250

Angle - 76 x 25 x 1.6 - PC - Black ANG076x25x1.6PC-NS 6060 T5 Black Powder

Coated 76 25 1.6 6500 mm 0.250

Angle - 76 x 25 x 1.6 - PC - White ANG076x25x1.6PC-PW 6060 T5 White Powder

Coated 76 25 1.6 6500 mm 0.250

CHAnnel mill Finish

Channel - 10 x 10 x 1.6 - Mill Finish - I.D. 6.8mm CHA010x10x1.6MF 6060 T5 Mill Finish 10 10 1.6 6500 mm 0.500

Channel - 10 x 12 x 1.6 - Mill Finish - I.D. 6.8mm CHA010x12x1.6MF 6060 T5 Mill Finish 10 12 1.6 6500 mm 0.500

Channel - 12 x 12 x 1.6 - Mill Finish - I.D. 8.8mm CHA012x12x1.6MF 6060 T5 Mill Finish 12 12 1.6 6500 mm 0.500

Channel - 12 x 20 x 2.5 - Mill Finish - I.D. 7mm CHA012x20x2.5MF 6060 T5 Mill Finish 12 20 2.5 6500 mm 0.500

Channel - 16 x 12 x 1.6 - Mill Finish - I.D. 12.8mm CHA016x12x1.6MF 6060 T5 Mill Finish 16 12 1.6 6500 mm 0.500

14

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Channel - 16 x 16 x 1.6 - Mill Finish - I.D. 12.8mm CHA016x16x1.6MF 6060 T5 Mill Finish 16 16 1.6 6500 mm 0.500

Channel - 16 x 16 x 3 - Mill Finish - I.D. 10mm CHA016x16x3MF 6060 T5 Mill Finish 16 16 3 6500 mm 0.500

Channel - 20 x 16 x 1.6 - Mill Finish - I.D. 16.8mm CHA020x16x1.6MF 6060 T5 Mill Finish 20 16 1.6 6500 mm 0.500

Channel - 20 x 20 x 1.6 - Mill Finish - I.D. 16.8mm CHA020x20x1.6MF 6060 T5 Mill Finish 20 20 1.6 6500 mm 0.500

Channel - 20 x 20 x 3 - Mill Finish - I.D. 14mm CHA020x20x3MF 6060 T5 Mill Finish 20 20 3 6500 mm 0.250

Channel - 25.6 x 40 x 1.8 - Mill Finish - I.D. 22mm CHA025.6x40x1.8MF 6060 T5 Mill Finish 25.6 40 1.8 6500 mm 0.250

Channel - 25 x 12 x 3 - Mill Finish - I.D. 19mm CHA025x12x3MF 6060 T5 Mill Finish 25 12 3 6500 mm 0.250

Channel - 25 x 20 x 1.6 - Mill Finish - I.D. 21.8mm CHA025x20x1.6MF 6060 T5 Mill Finish 25 20 1.6 6500 mm 0.500

Channel - 25 x 20 x 2.5 - Mill Finish - I.D. 20mm CHA025x20x2.5MF 6060 T5 Mill Finish 25 20 2.5 6500 mm 0.250

Channel - 25 x 25 x 1.6 - Mill Finish - I.D. 21.8mm CHA025x25x1.6MF 6060 T5 Mill Finish 25 25 1.6 6500 mm 0.250

Channel - 25 x 25 x 3 - Mill Finish - I.D. 19mm CHA025x25x3MF 6060 T5 Mill Finish 25 25 3 6500 mm 0.250

Channel - 25 x 40 x 3 - Mill Finish - I.D. 19mm CHA025x40x3MF 6060 T5 Mill Finish 25 40 3 6500 mm 0.250

Channel - 32 x 16 x 1.6 - Mill Finish - I.D. 28.8mm CHA032x16x1.6MF 6060 T5 Mill Finish 32 16 1.6 6500 mm 0.500

Channel - 32 x 25 x 3 - Mill Finish - I.D. 26mm CHA032x25x3MF 6060 T5 Mill Finish 32 25 3 6500 mm 0.250

Channel - 37.95 x 25 x 1.45 - Mill Finish - I.D. 35.05mm CHA037.95x25x1.45MF 6060 T5 Mill Finish 37.95 25 1.45 6500 mm 0.500

15

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Channel - 40 x 20 x 2 - Mill Finish - I.D. 36mm CHA040x20x2MF 6060 T5 Mill Finish 40 20 2 6500 mm 0.250

Channel - 40 x 20 x 3 - Mill Finish - I.D. 34mm CHA040x20x3MF 6060 T5 Mill Finish 40 20 3 6500 mm 0.250

Channel - 40 x 25 x 3 - Mill Finish - I.D. 34mm CHA040x25x3MF 6060 T5 Mill Finish 40 25 3 6500 mm 0.250

Channel - 40 x 40 x 3 - Mill Finish - I.D. 34mm CHA040x40x3MF 6060 T5 Mill Finish 40 40 3 6500 mm 0.250

Channel - 43.4 x 35 x 3 - Mill Finish - I.D. 37.4mm CHA043.4x35x3MF 6060 T5 Mill Finish 43.4 35 3 6500 mm 0.250

Channel - 50 x 25 x 3 - Mill Finish - I.D. 44mm CHA050x25x3MF 6060 T5 Mill Finish 50 25 3 6500 mm 0.250

Channel - 50 x 50 x 3 - Mill Finish - I.D. 44mm CHA050x50x3MF 6060 T5 Mill Finish 50 50 3 6500 mm 0.125

Channel - 53 x 25 x 1.2 - Mill Finish - I.D. 50.6mm CHA053x25x1.2MF 6060 T5 Mill Finish 53 25 1.2 6500 mm 0.500

Channel - 60 x 32 x 3 - Mill Finish - I.D. 54mm CHA060x32x3MF 6060 T5 Mill Finish 60 32 3 6500 mm 0.250

Channel - 76.2 x 38.1 x 7.93 - Mill Finish - I.D. 60.34mm - Int. Radius 7.62mm - Legs

7.93mm - Base 6.35mm

CHA076.2x38.1x7.93RMF 6061 T6 Mill Finish 76.2 38.1 7.93 6500 mm 0.125

Channel - 78.2 x 38 x 1.6 - Mill Finish - I.D. 75mm -

Coolroom ChannelCHA078.2x38x1.6MF 6060 T5 Mill Finish 78.2 38 1.6 6500 mm 0.250

Channel - 80 x 25 x 3 - Mill Finish - I.D. 74mm CHA080x25x3MF 6060 T5 Mill Finish 80 25 3 6500 mm 0.250

Channel - 80 x 40 x 4 - Mill Finish - I.D. 72mm CHA080x40x4MF 6060 T5 Mill Finish 80 40 4 6500 mm 0.125

Channel - 92.3 x 25 x 1.8 - Mill Finish - I.D. 88.7mm -

Coolroom ChannelCHA092.3x25x1.8MF 6060 T5 Mill Finish 92.3 25 1.8 6500 mm 0.250

16

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Channel - 100 x 25 x 3 - Mill Finish - I.D. 94mm CHA100x25x3MF 6060 T5 Mill Finish 100 25 3 6500 mm 0.125

Channel - 100 x 50 x 3 - Mill Finish - I.D. 94mm CHA100x50x3MF 6060 T5 Mill Finish 100 50 3 6500 mm 0.125

Channel - 101.6 x 50.8 x 7.93 - Mill Finish - I.D. 85.74mm - Int. Radius

9.14mm - Legs 7.93mm - Base 6.35mm

CHA101.6x50.8x7.93MF 6082 T6 Mill Finish 101.6 50.8 7.93 5500 mm 0.125

Channel - 103 x 38 x 1.6 - Mill Finish - I.D. 99.8mm -

Coolroom ChannelCHA103x38x1.6MF 6060 T5 Mill Finish 103 38 1.6 6500 mm 0.250

Channel - 118 x 25 x 1.8 - Mill Finish - I.D. 114.4mm

- Coolroom ChannelCHA118x25x1.8MF 6060 T5 Mill Finish 118 25 1.8 6500 mm 0.125

Channel - 127 x 63.5 x 6.35 - Mill Finish - I.D. 114.3mm - Int. Radius 10.67mm - Legs

9.53mm - Base 6.35mm

CHA127x63.5x6.35MF 6061 T6 Mill Finish 127 63.5 6.35 6500 mm 0.125

Channel - 152.4 x 63.5 x 7.93 - Mill Finish - I.D. 136.54mm - Int. Radius

10.67mm - Legs 7.93mm - Base 6.35mm

CHA152.4x63.5x7.93MF 6061 T6 Mill Finish 152.4 63.5 7.93 6500 mm 0.125

Channel Anodised

Channel - 10 x 10 x 1.6 - 15um Clear Anodised - I.D.

6.8mmCHA010x10x1.6AN 6060 T5 Clear Anodised 15um 10 10 1.6 6500 mm 0.500

Channel - 10 x 12 x 1.6 - 15um Clear Anodised - I.D.

6.8mmCHA010x12x1.6AN 6060 T5 Clear Anodised 15um 10 12 1.6 6500 mm 0.500

17

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Channel - 12 x 12 x 1.6 - 15um Clear Anodised - I.D.

8.8mmCHA012x12x1.6AN 6060 T5 Clear Anodised 15um 12 12 1.6 6500 mm 0.500

Channel - 12 x 20 x 2.5 - 15um Clear Anodised - I.D.

7mmCHA012x20x2.5AN 6060 T5 Clear Anodised 15um 12 20 2.5 6500 mm 0.250

Channel - 16 x 12 x 1.6 - 15um Clear Anodised - I.D.

12.8mmCHA016x12x1.6AN 6060 T5 Clear Anodised 15um 16 12 1.6 6500 mm 0.500

Channel - 16 x 16 x 1.6 - 15um Clear Anodised - I.D.

12.8mmCHA016x16x1.6AN 6060 T5 Clear Anodised 15um 16 16 1.6 6500 mm 0.500

Channel - 16 x 16 x 3 - 15um Clear Anodised - I.D.

10mmCHA016x16x3AN 6060 T5 Clear Anodised 15um 16 16 3 6500 mm 0.250

Channel - 20 x 16 x 1.6 - 15um Clear Anodised - I.D.

16.8mmCHA020x16x1.6AN 6060 T5 Clear Anodised 15um 20 16 1.6 6500 mm 0.500

Channel - 20 x 20 x 1.6 - 15um Clear Anodised - I.D.

16.8mmCHA020x20x1.6AN 6060 T5 Clear Anodised 15um 20 20 1.6 6500 mm 0.250

Channel - 20 x 20 x 3 - 15um Clear Anodised - I.D.

14mmCHA020x20x3AN 6060 T5 Clear Anodised 15um 20 20 3 6500 mm 0.250

Channel - 25 x 12 x 3 - 15um Clear Anodised - I.D.

19mmCHA025x12x3AN 6060 T5 Clear Anodised 15um 25 12 3 6500 mm 0.250

Channel - 25 x 20 x 1.6 - 15um Clear Anodised - I.D.

21.8mmCHA025x20x1.6AN 6060 T5 Clear Anodised 15um 25 20 1.6 6500 mm 0.250

Channel - 25 x 20 x 2.5 - 15um Clear Anodised - I.D.

20mmCHA025x20x2.5AN 6060 T5 Clear Anodised 15um 25 20 2.5 6500 mm 0.250

18

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Channel - 25 x 25 x 1.6 - 15um Clear Anodised - I.D.

21.8mmCHA025x25x1.6AN 6060 T5 Clear Anodised 15um 25 25 1.6 6500 mm 0.250

Channel - 25 x 25 x 3 - 15um Clear Anodised - I.D.

19mmCHA025x25x3AN 6060 T5 Clear Anodised 15um 25 25 3 6500 mm 0.250

Channel - 25 x 40 x 3 - 15um Clear Anodised - I.D.

19mmCHA025x40x3AN 6060 T5 Clear Anodised 15um 25 40 3 6500 mm 0.250

Channel - 32 x 16 x 1.6 - 15um Clear Anodised - I.D.

28.8mmCHA032x16x1.6AN 6060 T5 Clear Anodised 15um 32 16 1.6 6500 mm 0.250

Channel - 32 x 25 x 3 - 15um Clear Anodised - I.D.

26mmCHA032x25x3AN 6060 T5 Clear Anodised 15um 32 25 3 6500 mm 0.250

Channel - 40 x 20 x 2 - 15um Clear Anodised - I.D.

36mmCHA040x20x2AN 6060 T5 Clear Anodised 15um 40 20 2 6500 mm 0.250

Channel - 40 x 20 x 3 - 15um Clear Anodised - I.D.

34mmCHA040x20x3AN 6060 T5 Clear Anodised 15um 40 20 3 6500 mm 0.250

Channel - 40 x 25 x 3 - 15um Clear Anodised - I.D.

34mmCHA040x25x3AN 6060 T5 Clear Anodised 15um 40 25 3 6500 mm 0.250

Channel - 40 x 40 x 3 - 15um Clear Anodised - I.D.

34mmCHA040x40x3AN 6060 T5 Clear Anodised 15um 40 40 3 6500 mm 0.125

Channel - 50 x 25 x 3 - 15um Clear Anodised - I.D.

44mmCHA050x25x3AN 6060 T5 Clear Anodised 15um 50 25 3 6500 mm 0.250

Channel - 50 x 50 x 3 - 15um Clear Anodised - I.D.

44mmCHA050x50x3AN 6060 T5 Clear Anodised 15um 50 50 3 6500 mm 0.125

19

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Channel - 78.2 x 38 x 1.6 - 15um Clear Anodised - I.D.

75mmCHA078.2x38x1.6AN 6060 T5 Clear Anodised 15um 78.2 38 1.6 6500 mm 0.250

Channel - 80 x 25 x 3 - 15um Clear Anodised - I.D.

74mmCHA080x25x3AN 6060 T5 Clear Anodised 15um 80 25 3 6500 mm 0.125

Channel - 100 x 50 x 3 - 15um Clear Anodised - I.D.

94mmCHA100x50x3AN 6060 T5 Clear Anodised 15um 100 50 3 6500 mm 0.125

drawn Tube mill Finish

Drawn Tube - 15.88 x 1.42 - Mill Finish - I.D. 13.04mm DRT15.88x1.42MF 6063 T6 Mill Finish 15.88 1.42 5500 mm 0.500

Drawn Tube - 19.05 x 1.42 - Mill Finish - I.D. 16.21mm DRT19.05x1.42MF 6063 T6 Mill Finish 19.05 1.42 5500 mm 0.500

Drawn Tube - 22.23 x 1.42 - Mill Finish - I.D. 19.39mm DRT22.23x1.42MF 6063 T6 Mill Finish 22.23 1.42 5500 mm 0.500

Drawn Tube - 25.4 x 1.42 - Mill Finish - I.D. 22.56mm DRT25.4x1.42MF 6063 T6 Mill Finish 25.4 1.42 5500 mm 0.500

Drawn Tube - 28.58 x 1.42 - Mill Finish - I.D. 25.74mm DRT28.58x1.42MF 6063 T6 Mill Finish 28.58 1.42 5500 mm 0.500

Drawn Tube - 32 x 1.6 - Mill Finish - I.D. 28.8mm DRT32x1.6MF 6060 T81 Mill Finish 32 1.6 6000 mm 0.250

Drawn Tube - 40 x 1.6 - Mill Finish - I.D. 36.8mm DRT40x1.6MF 6060 T5 Mill Finish 40 1.6 6000 mm 0.250

Drawn Tube - 44 x 1.6 - Mill Finish - I.D. 40.8mm DRT44x1.6MF 6060 T5 Mill Finish 44 1.6 6000 mm 0.250

Drawn Tube - 48 x 1.6 - Mill Finish - I.D. 44.8mm DRT48x1.6MF 6060 T5 Mill Finish 48 1.6 6000 mm 0.250

Drawn Tube - 50 x 1.6 - Mill Finish - I.D. 46.8mm DRT50x1.6MF 6106 T83 Mill Finish 50 1.6 6000 mm 0.250

20

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

drawn Tube Anodised

Drawn Tube - 15.88 x 1.42 - 15um Clear Anodised - I.D.

13.04mmDRT15.88x1.42AN 6063 T6 Clear Anodised 15um 15.88 1.42 5500 mm 0.500

Drawn Tube - 19.05 x 1.42 - 15um Clear Anodised - I.D.

16.21mmDRT19.05x1.42AN 6063 T6 Clear Anodised 15um 19.05 1.42 5500 mm 0.500

Drawn Tube - 22.23 x 1.42 - 15um Clear Anodised - I.D.

19.39mmDRT22.23x1.42AN 6063 T6 Clear Anodised 15um 22.23 1.42 5500 mm 0.500

Drawn Tube - 25.4 x 1.42 - 15um Clear Anodised - I.D.

22.56mmDRT25.4x1.42AN 6063 T6 Clear Anodised 15um 25.4 1.42 5500 mm 0.500

Drawn Tube - 28.58 x 1.42 - 15um Clear Anodised - I.D.

25.74mmDRT28.58x1.42AN 6063 T6 Clear Anodised 15um 28.58 1.42 5500 mm 0.250

Drawn Tube - 32 x 1.6 - 15um Clear Anodised - I.D.

28.8mmDRT32x1.6AN 6063 T6 Clear Anodised 15um 32 1.6 6000 mm 0.250

Drawn Tube - 44 x 1.6 - 15um Clear Anodised - I.D.

40.8mmDRT44x1.6AN 6060 T5 Clear Anodised 15um 44 1.6 6000 mm 0.250

Drawn Tube - 48 x 1.6 - 15um Clear Anodised - I.D.

44.8mmDRT48x1.6AN 6060 T5 Clear Anodised 15um 48 1.6 6000 mm 0.250

Flat Bar mill Finish

Flat Bar - 10 x 3 - Mill Finish FLB010x3MF 6060 T5 Mill Finish 10 3 4000 mm 0.500

Flat Bar - 12 x 1.6 - Mill Finish FLB012x01.6MF 6060 T5 Mill Finish 12 1.6 4000 mm 0.500

Flat Bar - 12 x 3 - Mill Finish FLB012x03MF 6060 T5 Mill Finish 12 3 4000 mm 0.500

Flat Bar - 12 x 6 - Mill Finish FLB012x06MF 6060 T5 Mill Finish 12 6 4000 mm 0.500

21

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Flat Bar - 12 x 10 - Mill Finish FLB012x10MF 6060 T5 Mill Finish 12 10 4000 mm 0.500

Flat Bar - 16 x 3 - Mill Finish FLB016x3MF 6060 T5 Mill Finish 16 3 4000 mm 0.500

Flat Bar - 20 x 1.6 - Mill Finish FLB020x01.6MF 6060 T5 Mill Finish 20 1.6 4000 mm 0.500

Flat Bar - 20 x 3 - Mill Finish FLB020x03MF 6060 T5 Mill Finish 20 3 4000 mm 0.500

Flat Bar - 20 x 4 - Mill Finish FLB020x04MF 6060 T5 Mill Finish 20 4 4000 mm 0.500

Flat Bar - 20 x 6 - Mill Finish FLB020x06MF 6060 T5 Mill Finish 20 6 4000 mm 0.500

Flat Bar - 20 x 10 - Mill Finish FLB020x10MF 6060 T5 Mill Finish 20 10 4000 mm 0.500

Flat Bar - 20 x 12 - Mill Finish FLB020x12MF 6060 T5 Mill Finish 20 12 4000 mm 0.500

Flat Bar - 25 x 1.6 - Mill Finish FLB025x01.6MF 6060 T5 Mill Finish 25 1.6 4000 mm 0.500

Flat Bar - 25 x 3 - Mill Finish FLB025x03MF 6060 T5 Mill Finish 25 3 4000 mm 0.500

Flat Bar - 25 x 4 - Mill Finish FLB025x04MF 6060 T5 Mill Finish 25 4 4000 mm 0.500

Flat Bar - 25 x 6 - Mill Finish FLB025x06MF 6060 T5 Mill Finish 25 6 4000 mm 0.500

Flat Bar - 25 x 10 - Mill Finish FLB025x10MF 6060 T5 Mill Finish 25 10 4000 mm 0.250

Flat Bar - 25 x 12 - Mill Finish FLB025x12MF 6060 T5 Mill Finish 25 12 4000 mm 0.250

Flat Bar - 25 x 20 - Mill Finish FLB025x20MF 6060 T5 Mill Finish 25 20 4000 mm 0.250

Flat Bar - 32 x 3 - Mill Finish FLB032x03MF 6060 T5 Mill Finish 32 3 4000 mm 0.500

Flat Bar - 32 x 6 - Mill Finish FLB032x06MF 6060 T5 Mill Finish 32 6 4000 mm 0.500

Flat Bar - 32 x 10 - Mill Finish FLB032x10MF 6060 T5 Mill Finish 32 10 4000 mm 0.250

Flat Bar Fluted - 38.1 x 4 - Mill Finish FLB038.1x4MF-FLU 6060 T5 Mill Finish 38.1 4 4000 mm 0.500

Flat Bar - 40 x 3 - Mill Finish FLB040x03MF 6060 T5 Mill Finish 40 3 4000 mm 0.500

Flat Bar - 40 x 4 - Mill Finish FLB040x04MF 6060 T5 Mill Finish 40 4 4000 mm 0.500

22

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Flat Bar - 40 x 6 - Mill Finish FLB040x06MF 6060 T5 Mill Finish 40 6 4000 mm 0.250

Flat Bar - 40 x 10 - Mill Finish FLB040x10MF 6060 T5 Mill Finish 40 10 4000 mm 0.250

Flat Bar - 40 x 12 - Mill Finish FLB040x12MF 6060 T5 Mill Finish 40 12 4000 mm 0.250

Flat Bar - 40 x 16 - Mill Finish FLB040x16MF 6060 T5 Mill Finish 40 16 4000 mm 0.125

Flat Bar - 40 x 25 - Mill Finish FLB040x25MF 6060 T5 Mill Finish 40 25 4000 mm 0.125

Flat Bar - 50 x 1.5 - Mill Finish FLB050x01.5MF 6060 T5 Mill Finish 50 1.5 3600 mm 0.500

Flat Bar - 50 x 3 - Mill Finish FLB050x03MF 6060 T5 Mill Finish 50 3 4000 mm 0.500

Flat Bar - 50 x 4 - Mill Finish FLB050x04MF 6060 T5 Mill Finish 50 4 4000 mm 0.500

Flat Bar - 50 x 6 - Mill Finish FLB050x06MF 6060 T5 Mill Finish 50 6 4000 mm 0.250

Flat Bar - 50 x 6 - Mill Finish - Full Radius FLB050x06RMF 6082 T5 Mill Finish 50 6 4000 mm 0.250

Flat Bar - 50 x 10 - Mill Finish FLB050x10MF 6060 T5 Mill Finish 50 10 4000 mm 0.250

Flat Bar - 50 x 12 - Mill Finish FLB050x12MF 6060 T5 Mill Finish 50 12 4000 mm 0.250

Flat Bar - 50 x 20 - Mill Finish FLB050x20MF 6060 T5 Mill Finish 50 20 4000 mm 0.125

Flat Bar - 50 x 25 - Mill Finish FLB050x25MF 6060 T5 Mill Finish 50 25 4000 mm 0.125

Flat Bar - 60 x 3 - Mill Finish FLB060x03MF 6060 T5 Mill Finish 60 3 4000 mm 0.500

Flat Bar - 60 x 6 - Mill Finish FLB060x06MF 6060 T5 Mill Finish 60 6 4000 mm 0.250

Flat Bar - 60 x 10 - Mill Finish FLB060x10MF 6060 T5 Mill Finish 60 10 4000 mm 0.250

Flat Bar - 60 x 12 - Mill Finish FLB060x12MF 6060 T5 Mill Finish 60 12 4000 mm 0.250

Flat Bar - 65 x 5 - Mill Finish FLB065x5MF 6060 T5 Mill Finish 65 5 4000 mm 0.250

23

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Flat Bar - 80 x 3 - Mill Finish FLB080x03MF 6060 T5 Mill Finish 80 3 4000 mm 0.250

Flat Bar - 80 x 6 - Mill Finish FLB080x06MF 6060 T5 Mill Finish 80 6 4000 mm 0.250

Flat Bar - 80 x 10 - Mill Finish FLB080x10MF 6060 T5 Mill Finish 80 10 4000 mm 0.125

Flat Bar - 80 x 12 - Mill Finish FLB080x12MF 6060 T5 Mill Finish 80 12 4000 mm 0.125

Flat Bar - 80 x 16 - Mill Finish FLB080x16MF 6060 T5 Mill Finish 80 16 4000 mm 0.125

Flat Bar - 80 x 25 - Mill Finish FLB080x25MF 6060 T5 Mill Finish 80 25 4000 mm 0.125

Flat Bar - 100 x 1.5 - Mill Finish FLB100x01.5MF 6060 T5 Mill Finish 100 1.5 3600 mm 0.500

Flat Bar - 100 x 3 - Mill Finish FLB100x03MF 6060 T5 Mill Finish 100 3 4000 mm 0.250

Flat Bar - 100 x 4 - Mill Finish FLB100x04MF 6060 T5 Mill Finish 100 4 4000 mm 0.250

Flat Bar - 100 x 6 - Mill Finish FLB100x06MF 6060 T5 Mill Finish 100 6 4000 mm 0.250

Flat Bar - 100 x 10 - Mill Finish FLB100x10MF 6060 T5 Mill Finish 100 10 4000 mm 0.125

Flat Bar - 100 x 12 - Mill Finish FLB100x12MF 6060 T5 Mill Finish 100 12 4000 mm 0.125

Flat Bar - 100 x 20 - Mill Finish FLB100x20MF 6060 T5 Mill Finish 100 20 4000 mm 0.125

Flat Bar - 100 x 25 - Mill Finish FLB100x25MF 6060 T5 Mill Finish 100 25 4000 mm 0.125

Flat Bar - 125 x 3 - Mill Finish FLB125x3MF 6060 T5 Mill Finish 125 3 4000 mm 0.250

Flat Bar - 150 x 1.5 - Mill Finish FLB150x1.5MF 6060 T5 Mill Finish 150 1.5 3600 mm 0.500

Flat Bar - 160 x 6 - Mill Finish FLB160x06MF 6060 T5 Mill Finish 160 6 4000 mm 0.125

24

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Flat Bar - 160 x 10 - Mill Finish FLB160x10MF 6060 T5 Mill Finish 160 10 4000 mm 0.125

Flat Bar - 160 x 12 - Mill Finish FLB160x12MF 6060 T5 Mill Finish 160 12 4000 mm 0.125

Flat Bar Anodised

Flat Bar - 10 x 3 - 15um Clear Anodised FLB010x3AN 6060 T5 Clear Anodised 15um 10 3 4000 mm 0.500

Flat Bar - 12 x 1.6 - 15um Clear Anodised FLB012x01.6AN 6060 T5 Clear Anodised 15um 12 1.6 4000 mm 0.500

Flat Bar - 12 x 3 - 15um Clear Anodised FLB012x03AN 6060 T5 Clear Anodised 15um 12 3 4000 mm 0.500

Flat Bar - 16 x 3 - 15um Clear Anodised FLB016x3AN 6060 T5 Clear Anodised 15um 16 3 4000 mm 0.500

Flat Bar - 20 x 1.6 - 15um Clear Anodised FLB020x01.6AN 6060 T5 Clear Anodised 15um 20 1.6 4000 mm 0.500

Flat Bar - 20 x 3 - 15um Clear Anodised FLB020x03AN 6060 T5 Clear Anodised 15um 20 3 4000 mm 0.500

Flat Bar - 20 x 4 - 15um Clear Anodised FLB020x04AN 6060 T5 Clear Anodised 15um 20 4 4000 mm 0.500

Flat Bar - 20 x 6 - 15um Clear Anodised FLB020x06AN 6060 T5 Clear Anodised 15um 20 6 4000 mm 0.500

Flat Bar - 25 x 1.6 - 15um Clear Anodised FLB025x01.6AN 6060 T5 Clear Anodised 15um 25 1.6 4000 mm 0.500

Flat Bar - 25 x 3 - 15um Clear Anodised FLB025x3AN 6060 T5 Clear Anodised 15um 25 3 4000 mm 0.500

Flat Bar - 25 x 4 - 15um Clear Anodised FLB025x4AN 6060 T5 Clear Anodised 15um 25 4 4000 mm 0.500

Flat Bar - 25 x 6 - 15um Clear Anodised FLB025x6AN 6060 T5 Clear Anodised 15um 25 6 4000 mm 0.500

Flat Bar - 32 x 3 - 15um Clear Anodised FLB032x3AN 6060 T5 Clear Anodised 15um 32 3 4000 mm 0.500

25

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Flat Bar - 40 x 3 - 15um Clear Anodised FLB040x3AN 6060 T5 Clear Anodised 15um 40 3 4000 mm 0.500

Flat Bar - 50 x 1.5 - 15um Clear Anodised FLB050x01.5AN 6060 T5 Clear Anodised 15um 50 1.5 3600 mm 0.500

Flat Bar - 50 x 3 - 15um Clear Anodised FLB050x03AN 6060 T5 Clear Anodised 15um 50 3 4000 mm 0.500

Flat Bar - 60 x 3 - 15um Clear Anodised FLB060x3AN 6060 T5 Clear Anodised 15um 60 3 4000 mm 0.500

Flat Bar - 60 x 6 - 15um Clear Anodised FLB060x6AN 6060 T5 Clear Anodised 15um 60 6 4000 mm 0.250

Flat Bar - 80 x 3 - 15um Clear Anodised FLB080x3AN 6060 T5 Clear Anodised 15um 80 3 4000 mm 0.250

Flat Bar - 80 x 6 - 15um Clear Anodised FLB080x6AN 6060 T5 Clear Anodised 15um 80 6 4000 mm 0.250

Flat Bar - 100 x 1.5 - 10um Clear Anodised FLB100x1.5AN 6060 T5 Clear Anodised 10um 100 1.5 3600 mm 0.500

Flat Bar - 100 x 3 - 15um Clear Anodised FLB100x3AN 6060 T5 Clear Anodised 15um 100 3 4000 mm 0.250

Flat Bar - 125 x 3 - 15um Clear Anodised FLB125x3AN 6060 T5 Clear Anodised 15um 125 3 4000 mm 0.250

Flat Bar - 150 x 1.5 - 10um Clear Anodised FLB150x1.5AN 6060 T5 Clear Anodised 10um 150 1.5 3600 mm 0.250

Flat Bar - 160 x 6 - 15um Clear Anodised FLB160x6AN 6060 T5 Clear Anodised 15um 160 6 4000 mm 0.125

26

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

machine Bar mill Finish

Machine Bar - 50mm - Mill Finish MAB050MF 2011 T3 Mill Finish 50 per 100

mm100 mm

Machine Bar - 60mm - Mill Finish MAB060MF 2011 T6 Mill Finish 60 per 100

mm100 mm

Special Order: available from 3mm - 210mm diameter, cut to any size you require. Hard alloy, custom quote only 2011 T3 Mill Finish per 100

mm100 mm

rectangular Hollow mill Finish

Rectangular Hollow - 38.1 x 25.4 x 2.54 - Mill Finish RHS038.1x25.4x2.54MF 6060 T5 Mill Finish 38.1 25.4 2.54 6500 mm 0.250

Rectangular Hollow - 38 x 25 x 1.5 - Mill Finish - I.D.

35mm - Ext. Radius 3mm - Int. Radius 1.5mm

RHS038x25x1.5RMF 6106 T6 Mill Finish 38 25 1.5 6000 mm 0.250

Rectangular Hollow - 40 x 20 x 2 - Mill Finish - I.D.

36mmRHS040x20x2RMF 6060 T5 Mill Finish 40 20 2 6300 mm 0.250

Rectangular Hollow - 40 x 20 x 3 - Mill Finish - I.D.

34mmRHS040x20x3MF 6060 T5 Mill Finish 40 20 3 6500 mm 0.250

Rectangular Hollow - 40 x 25 x 2.5 - Mill Finish - I.D.

35mmRHS040x25x2.5MF 6060 T5 Mill Finish 40 25 2.5 6500 mm 0.250

Rectangular Hollow - 40 x 25 x 3 - Mill Finish - I.D. 34mm - Ext. Radius 3mm

RHS040x25x3RMF 6060 T5 Mill Finish 40 25 3 6500 mm 0.250

27

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Rectangular Hollow - 50.8 x 11.1 x 1.3 - Mill Finish -

I.D. 48.2mm x 8.5mm- Ext. Radius 2mm

RHS050.8x11.1x1.3RMF 6060 T5 Mill Finish 50.8 11.1 1.3 6500 mm 0.250

Rectangular Hollow - 50 x 25 x 1.5 - Mill Finish - I.D. 47mm - Ext. Radius 1mm

RHS050x25x1.5RMF 6060 T5 Mill Finish 50 25 1.5 6000 mm 0.250

Rectangular Hollow - 50 x 25 x 3 - Mill Finish - I.D.

44mmRHS050x25x3MF 6060 T5 Mill Finish 50 25 3 6500 mm 0.125

Rectangular Hollow - 50 x 40 x 3 - Mill Finish - I.D.

44mmRHS050x40x3MF 6060 T5 Mill Finish 50 40 3 6500 mm 0.125

Rectangular Hollow - 60 x 40 x 3 - Mill Finish - I.D.

54mmRHS060x40x3MF 6060 T5 Mill Finish 60 40 3 6500 mm 0.125

Rectangular Hollow - 60 x 50 x 3 - Mill Finish - I.D.

54mmRHS060x50x3MF 6060 T5 Mill Finish 60 50 3 6500 mm 0.125

Rectangular Hollow - 65 x 16 x 1.4 - Mill Finish - I.D.

62.2mm - Ext. Radius 3mmRHS065x16x1.4RMF 6060 T5 Mill Finish 65 16 1.4 6500 mm 0.250

Rectangular Hollow - 75 x 50 x 3 - Mill Finish - I.D.

69mmRHS075x50x3MF 6060 T5 Mill Finish 75 50 3 6500 mm 0.125

Rectangular Hollow - 76.2 x 25.4 x 2.4 - Mill Finish - I.D.

71.4mmRHS076.2x25.4x2.4MF 6060 T5 Mill Finish 76.2 25.4 2.4 6500 mm 0.125

Rectangular Hollow - 80 x 25 x 3 - Mill Finish - I.D.

74mmRHS080x25x3MF 6060 T5 Mill Finish 80 25 3 6500 mm 0.125

Machine Bar Mill Finish Machine Bar - 50mm - Mill Finish MAB050MF 2011 T3 Mill Finish 50 per 100 mm 3.60 0.540 100 mm Machine Bar - 60mm - Mill Finish MAB060MF 2011 T6 Mill Finish 60 per 100 mm 1.80 0.763 100 mm Special Order: available from 3mm - 210mm diameter, cut to any size you require. Hard alloy, custom quote only 2011 T3 Mill Finish per 100 mm 100 mm

28

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Rectangular Hollow - 80 x 40 x 3 - Mill Finish - I.D.

74mmRHS080x40x3MF 6060 T5 Mill Finish 80 40 3 6500 mm 0.125

Rectangular Hollow - 80 x 50 x 3 - Mill Finish - I.D.

74mmRHS080x50x3MF 6060 T5 Mill Finish 80 50 3 6500 mm 0.125

Rectangular Hollow - 82.6 x 28.6 x 2.3 - Mill Finish - I.D.

78mmRHS082.6x28.6x2.3MF 6060 T5 Mill Finish 82.6 28.6 2.3 6500 mm 0.125

Rectangular Hollow - 100 x 25 x 2.5 - Mill Finish - I.D.

95mmRHS100x25x2.5MF 6060 T5 Mill Finish 100 25 2.5 6500 mm 0.125

Rectangular Hollow - 100 x 40 x 3 - Mill Finish - I.D.

94mmRHS100x40x3MF 6060 T5 Mill Finish 100 40 3 6500 mm 0.125

Rectangular Hollow - 100 x 50 x 1.6 - Mill Finish - I.D.

96.8mmRHS100x50x1.6MF 6106 T6 Mill Finish 100 50 1.6 6500 mm 0.125

Rectangular Hollow - 100 x 50 x 3 - Mill Finish - I.D.

94mmRHS100x50x3MF 6106 T6 Mill Finish 100 50 3 6500 mm 0.125

Rectangular Hollow - 125 x 40 x 3 - Mill Finish - I.D.

119mmRHS125x40x3MF 6060 T5 Mill Finish 125 40 3 6500 mm 0.125

Rectangular Hollow - 125 x 50 x 3 - Mill Finish - I.D.

119mmRHS125x50x3MF 6060 T5 Mill Finish 125 50 3 6500 mm 0.125

Rectangular Hollow - 150 x 50 x 3 - Mill Finish - I.D.

144mmRHS150x50x3MF 6106 T6 Mill Finish 150 50 3 6500 mm 0.125

Rectangular Hollow - 200 x 50 x 3 - Mill Finish - I.D.

194mmRHS200x50x3MF 6106 T6 Mill Finish 200 50 3 6500 mm 0.125

29

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Rectangular Hollow - 250 x 50 x 3 - Mill Finish - I.D.

244mmRHS250x50x3MF 6106 T6 Mill Finish 250 50 3 6500 mm 0.125

rectangular Hollow Anodised

Rectangular Hollow - 38.1 x 25.4 x 2.54 - 15um Clear

AnodisedRHS038.1x25.4x2.54AN 6060 T5 Clear Anodised 15um 38.1 25.4 2.54 6500 mm 0.250

Rectangular Hollow - 38 x 25 x 1.5 - 15um Clear An-odised - Ext. Radius 3mm

- Int. Radius 1.5mm

RHS038x25x1.5RAN 6060 T5 Clear Anodised 15um 38 25 1.5 6000 mm 0.250

Rectangular Hollow - 50 x 25 x 1.5 - 15um Clear An-odised - Ext. Radius 1mm

RHS050x25x1.5RAN 6060 T5 Clear Anodised 15um 50 25 1.5 6000 mm 0.250

Rectangular Hollow - 50 x 25 x 3 - 15um Clear An-

odisedRHS050x25x3AN 6060 T5 Clear Anodised 15um 50 25 3 6500 mm 0.125

Rectangular Hollow - 65 x 16 x 1.4 - 15um Clear

Anodised - RadiusRHS065x16x1.4RAN 6060 T5 Clear Anodised 15um 65 16 1.4 6500 mm 0.250

Rectangular Hollow - 70 x 20 x 1.6 - 15um Clear

AnodisedRHS070x20x1.6AN 6060 T5 Clear Anodised 15um 70 20 1.6 5000 mm 0.250

Rectangular Hollow - 76.2 x 25.4 x 2.4 - 15um Clear

AnodisedRHS076.2x25.4x2.4AN 6060 T5 Clear Anodised 15um 76.2 25.4 2.4 6500 mm 0.125

Rectangular Hollow - 80 x 40 x 3 - 15um Clear An-

odisedRHS080x40x3AN 6060 T5 Clear Anodised 15um 80 40 3 6500 mm 0.125

30

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Rectangular Hollow - 80 x 50 x 3 - 15um Clear An-

odisedRHS080x50x3AN 6060 T5 Clear Anodised 15um 80 50 3 6500 mm 0.125

Rectangular Hollow - 100 x 50 x 3 - 15um Clear An-

odisedRHS100x50x3AN 6106 T6 Clear Anodised 15um 100 50 3 6500 mm 0.125

round Bar mill Finish

Round Bar - 10mm - Mill Finish ROB010MF 6060 T5 Mill Finish 10 4000 mm 0.500

Round Bar - 12mm - Mill Finish ROB012MF 6060 T5 Mill Finish 12 4000 mm 0.500

Round Bar - 16mm - Mill Finish ROB016MF 6060 T5 Mill Finish 16 4000 mm 0.500

Round Bar - 20mm - Mill Finish ROB020MF 6060 T5 Mill Finish 20 4000 mm 0.250

Round Bar - 25mm - Mill Finish ROB025MF 6060 T5 Mill Finish 25 4000 mm 0.250

Round Bar - 30mm - Mill Finish ROB030MF 6061 T6 Mill Finish 30 4000 mm 0.125

Round Bar - 33mm - Mill Finish ROB033MF 6061 T6 Mill Finish 33 4000 mm 0.125

Round Bar - 39mm - Mill Finish ROB039MF 6106 T6 Mill Finish 39 4000 mm 0.125

31

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

round Tube mill Finish

Round Tube - 10 x 1.2 - Mill Finish - I.D. 7.6mm ROT010x1.2MF 6060 T5 Mill Finish 10 1.2 6500 mm 0.500

Round Tube - 10 x 1.6 - Mill Finish - I.D. 6.8mm ROT010x1.6MF 6060 T5 Mill Finish 10 1.6 6500 mm 0.500

Round Tube - 12 x 1.6 - Mill Finish - I.D. 8.8mm ROT012x1.6MF 6060 T5 Mill Finish 12 1.6 6500 mm 0.500

Round Tube - 12 x 1 - Mill Finish - I.D. 10mm ROT012x1MF 6060 T5 Mill Finish 12 1 6500 mm 0.500

Round Tube - 14 x 1.5 - Mill Finish - I.D. 11mm ROT014x1.5MF 6060 T5 Mill Finish 14 1.5 4000 mm 0.500

Round Tube - 16 x 1.2 - Mill Finish - I.D. 13.6mm ROT016x1.2MF 6060 T5 Mill Finish 16 1.2 6500 mm 0.500

Round Tube - 16 x 1.6 - Mill Finish - I.D. 12.8mm ROT016x1.6MF 6060 T5 Mill Finish 16 1.6 6500 mm 0.500

Round Tube - 20 x 1.6 - Mill Finish - I.D. 16.8mm ROT020x1.6MF 6060 T5 Mill Finish 20 1.6 6500 mm 0.500

Round Tube - 25 x 1.6 - Mill Finish - I.D. 21.8mm ROT025x1.6MF 6060 T5 Mill Finish 25 1.6 6500 mm 0.500

Round Tube - 25 x 3 - Mill Finish - I.D. 19mm ROT025x3MF 6060 T5 Mill Finish 25 3 6500 mm 0.250

Round Tube - 32 x 1.6 - Mill Finish - I.D. 28.8mm ROT032x1.6MF 6060 T5 Mill Finish 32 1.6 6500 mm 0.250

Round Tube - 32 x 3 - Mill Finish - I.D. 26mm ROT032x3MF 6060 T5 Mill Finish 32 3 6500 mm 0.250

Round Tube - 40 x 1.6 - Mill Finish - I.D. 36.8mm ROT040x1.6MF 6060 T5 Mill Finish 40 1.6 6500 mm 0.250

Round Tube - 40 x 3 - Mill Finish - I.D. 34mm ROT040x3MF 6060 T5 Mill Finish 40 3 6500 mm 0.250

32

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Round Tube - 48.41 x 4.47 - 15um Black An-

odised - Nata Certified - I.D. 39.47mm

ROT048.41x4.47AN-BK 6061 T6 Black Anodised 15um 48.41 4.47 6500 mm 0.125

Round Tube - 48.41 x 4.47 - Mill Finish - Nata Certified

- I.D. 39.47mmROT048.41x4.47MF 6061 T6 Mill Finish 48.41 4.47 6500 mm 0.125

Round Tube - 50 x 1.6 - Mill Finish - I.D. 46.8mm ROT050x1.6MF 6060 T5 Mill Finish 50 1.6 6500 mm 0.250

Round Tube - 50 x 3 - Mill Finish - I.D. 44mm ROT050x3MF 6060 T5 Mill Finish 50 3 6500 mm 0.125

Round Tube - 60 x 2 - Mill Finish - I.D. 56mm ROT060x2MF 6060 T5 Mill Finish 60 2 6500 mm 0.250

Round Tube - 60 x 3 - Mill Finish - I.D. 54mm ROT060x3MF 6060 T5 Mill Finish 60 3 6500 mm 0.125

Round Tube - 60 x 5 - Mill Finish - I.D. 50mm ROT060x5MF 6060 T5 Mill Finish 60 5 6000 mm 0.125

Round Tube - 63.5 x 6.35 - Mill Finish - I.D. 50.8mm ROT063.5x6.35MF 6106 T6 Mill Finish 63.5 6.35 6500 mm 0.125

Round Tube - 76.19 x 6.35 - Mill Finish - I.D. 63.49mm ROT076.19x6.35MF 6061 T6 Mill Finish 76.19 6.35 6500 mm 0.125

Round Tube - 80 x 3 - Mill Finish - I.D. 74mm ROT080x3MF 6060 T5 Mill Finish 80 3 6500 mm 0.125

Round Tube - 100 x 3 - Mill Finish - I.D. 94mm ROT100x3MF 6060 T5 Mill Finish 100 3 6500 mm 0.125

Round Tube - 101.6 x 6.35 - Mill Finish - I.D. 88.9mm ROT101.6X6.35MF 6061 T6 Mill Finish 101.6 6.35 6500 mm 0.125

Round Tube - 127 x 2.8 - Mill Finish - I.D. 121.4mm ROT127x2.8MF 6060 T5 Mill Finish 127 2.8 6500 mm 0.125

33

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Round Tube - 152.4 x 3.25 - Mill Finish - I.D. 145.9mm ROT152.4x3.25MF 6060 T5 Mill Finish 152.4 3.25 6000 mm 0.125

Round Tube - 203.2 x 3 - Mill Finish - I.D. 197.2mm ROT203.2x3MF 6060 T5 Mill Finish 203.2 3 4800 mm 0.125

Square Bar mill Finish

Square Bar - 6 x 6 - Mill Finish SQB06MF 6060 T5 Mill Finish 6 6 4000 mm 1.000

Square Bar - 10 x 10 - Mill Finish SQB10MF 6060 T5 Mill Finish 10 10 4000 mm 1.000

Square Bar - 12 x 12 - Mill Finish SQB12MF 6060 T5 Mill Finish 12 12 4000 mm 0.500

Square Bar - 16 x 16 - Mill Finish SQB16MF 6060 T5 Mill Finish 16 16 4000 mm 0.250

Square Bar - 20 x 20 - Mill Finish SQB20MF 6060 T5 Mill Finish 20 20 4000 mm 0.250

Square Bar - 25 x 25 - Mill Finish SQB25MF 6060 T5 Mill Finish 25 25 4000 mm 0.250

Square Bar - 40 x 40 - Mill Finish SQB40MF 6106 T6 Mill Finish 40 40 4000 mm 0.125

Square Bar - 50 x 50 - Mill Finish SQB50MF 6106 T6 Mill Finish 50 50 per 100

mm 0.025

Square Bar - 65 x 65 - Mill Finish SQB65MF 6106 T6 Mill Finish 65 65 per 100

mm 0.025

34

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Square Hollow mill Finish

Square Hollow - 12 x 1.6 - Mill Finish - I.D. 8.8mm SQH012x1.6MF 6060 T5 Mill Finish 12 1.6 6500 mm 0.500

Square Hollow - 20 x 1.6 - Mill Finish - I.D. 16.8mm SQH020x1.6MF 6060 T5 Mill Finish 20 1.6 6500 mm 0.500

Square Hollow - 20 x 3 - Mill Finish - I.D. 14mm SQH020x3MF 6060 T5 Mill Finish 20 3 6500 mm 0.250

Square Hollow - 25 x 1.6 - Mill Finish - I.D. 21.8mm SQH025x1.6MF 6060 T5 Mill Finish 25 1.6 6500 mm 0.500

Square Hollow - 25 x 3 - Mill Finish - I.D. 19mm SQH025x3MF 6060 T5 Mill Finish 25 3 6500 mm 0.250

Square Hollow - 25 x 3 - Mill Finish - I.D. 19mm - Ext.

Radius 3mm - Int. Radius 3mm

SQH025x3RMF 6060 T5 Mill Finish 25 3 6000 mm 0.250

Square Hollow - 32 x 2 - Mill Finish - I.D. 28mm SQH032x2MF 6060 T5 Mill Finish 32 2 6500 mm 0.250

Square Hollow - 32 x 3 - Mill Finish - I.D. 26mm SQH032x3MF 6060 T5 Mill Finish 32 3 6500 mm 0.250

Square Hollow - 40 x 1.6 - Mill Finish - I.D. 36.8mm SQH040x1.6MF 6060 T5 Mill Finish 40 1.6 6500 mm 0.250

Square Hollow - 40 x 3 - Mill Finish - I.D. 34mm SQH040x3MF 6060 T5 Mill Finish 40 3 6500 mm 0.125

Square Hollow - 45 x 2.5 - Mill Finish - I.D. 40mm SQH045x2.5MF 6060 T5 Mill Finish 45 2.5 6500 mm 0.125

Square Hollow - 50.8 x 2.03 - Mill Finish - I.D. 46.74mm - Ext. Radius 6.35mm - Int.

Radius 4.32mm

SQH050.8x2.03RMF 6060 T5 Mill Finish 50.8 2.03 6500 mm 0.250

35

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Square Hollow - 50.8 x 3.2 - Mill Finish - I.D. 44.4mm -

Ext. Radius 4.75mmSQH050.8x3.2RMF 6060 T5 Mill Finish 50.8 3.2 6500 mm 0.125

Square Hollow - 50 x 1.6 - Mill Finish - I.D. 46.8mm SQH050x1.6MF 6060 T5 Mill Finish 50 1.6 6500 mm 0.250

Square Hollow - 50 x 2.5 - Mill Finish - I.D. 45mm SQH050x2.5MF 6060 T5 Mill Finish 50 2.5 6500 mm 0.125

Square Hollow - 50 x 3 - Mill Finish - I.D. 44mm SQH050x3MF 6060 T5 Mill Finish 50 3 6500 mm 0.125

Square Hollow - 65 x 2.5 - Mill Finish - I.D. 60mm SQH065x2.5MF 6060 T5 Mill Finish 65 2.5 6500 mm 0.125

Square Hollow - 75 x 3 - Mill Finish - I.D. 69mm SQH075x3MF 6060 T5 Mill Finish 75 3 6500 mm 0.125

Square Hollow - 76 x 6.35 - Mill Finish - I.D. 63.3mm - Ext. Radius 16mm - Int.

Radius 9.65mm

SQH076x6.35RMF 6082 T6 Mill Finish 76 6.35 6000 mm 0.125

Square Hollow - 90 x 2 - Mill Finish - I.D. 86mm - Ext. Radius 6.35mm - Int.

Radius 4.35mm

SQH090x2RMF 6060 T5 Mill Finish 90 2 6000 mm 0.125

Square Hollow - 100 x 3 - Mill Finish - I.D. 94mm SQH100x3MF 6060 T5 Mill Finish 100 3 6500 mm 0.125

36

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Tee mill Finish

Tee - 20 x 20 x 1.6 - Mill Finish TEE20x20x1.6MF 6060 T5 Mill Finish 20 20 1.6 4000 mm 1.000

Tee - 20 x 20 x 3 - Mill Finish TEE20x20x3MF 6060 T5 Mill Finish 20 20 3 4000 mm 0.500

Tee - 25 x 25 x 1.6 - Mill Finish TEE25x25x1.6MF 6060 T5 Mill Finish 25 25 1.6 6500 mm 0.500

Tee - 25 x 25 x 3 - Mill Finish TEE25x25x3MF 6060 T5 Mill Finish 25 25 3 6500 mm 0.250

Tee - 40 x 20 x 1.6 - Mill Finish TEE40x20x1.6MF 6060 T5 Mill Finish 40 20 1.6 6500 mm 0.500

Tee - 40 x 40 x 1.6 - Mill Finish TEE40x40x1.6MF 6060 T5 Mill Finish 40 40 1.6 6500 mm 0.500

Tee - 40 x 40 x 3 - Mill Finish TEE40x40x3MF 6060 T5 Mill Finish 40 40 3 6500 mm 0.250

Tee - 50 x 25 x 1.6 - Mill Finish TEE50x25x1.6MF 6060 T5 Mill Finish 50 25 1.6 6500 mm 0.500

Tee - 50 x 50 x 3 - Mill Finish TEE50x50x3MF 6060 T5 Mill Finish 50 50 3 6500 mm 0.250

Tee Anodised

Tee - 20 x 20 x 1.6 - 15um Clear Anodised TEE20x20x1.6AN 6060 T5 Clear Anodised 15um 20 20 1.6 4000 mm 0.250

Tee - 20 x 20 x 3 - 15um Clear Anodised TEE20x20x3AN 6060 T5 Clear Anodised 15um 20 20 3 4000 mm 0.250

Tee - 25 x 25 x 1.3 - 15um Clear Anodised TEE25x25x1.6AN 6060 T5 Clear Anodised 15um 25 25 1.3 6500 mm 0.500

Tee - 25 x 25 x 3 - 15um Clear Anodised TEE25x25x3AN 6060 T5 Clear Anodised 15um 25 25 3 6500 mm 0.250

Tee - 40 x 20 x 1.6 - 15um Clear Anodised TEE40x20x1.6AN 6060 T5 Clear Anodised 15um 40 20 1.6 6500 mm 0.500

37

STANDARD EXTRUSIONSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Tee - 40 x 40 x 1.6 - 15um Clear Anodised TEE40x40x1.6AN 6060 T5 Clear Anodised 15um 40 40 1.6 6500 mm 0.250

Tee - 40 x 40 x 3 - 15um Clear Anodised TEE40x40x3AN 6060 T5 Clear Anodised 15um 40 40 3 6500 mm 0.250

Tee - 50 x 25 x 1.6 - 15um Clear Anodised TEE50x25x1.6AN 6060 T5 Clear Anodised 15um 50 25 1.6 6500 mm 0.250

38

Sheet & Platedescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Flat Sheet

Sheet - 0.6 x 1200 x 2400 - Mill Finish SHE0.6x1200x2400MF 5005 H34 Mill Finish 0.6 1200 2400 2400mm x

1200mm 0.250

Sheet - 0.8 x 1200 x 2400 - Mill Finish SHE0.8x1200x2400MF 5005 H34 Mill Finish 0.8 1200 2400 2400mm x

1200mm 0.250

Sheet - 1 x 1200 x 2400 - Mill Finish SHE1.0x1200x2400MF 5005 H34 Mill Finish 1 1200 2400 2400mm x

1200mm 0.250

Sheet - 1.2 x 1200 x 2400 - Mill Finish SHE1.2x1200x2400MF 5005 H34 Mill Finish 1.2 1200 2400 2400mm x

1200mm 0.250

Sheet - 1.6 x 1200 x 2400 - Mill Finish SHE1.6x1200x2400MF 5005 H34 Mill Finish 1.6 1200 2400 2400mm x

1200mm 0.125

Sheet - 1.6 x 1200 x 2400 - 15um Clear Anodised SHE1.6x1200x2400AN 5005 H34 Clear Anodised 15um 1.6 1200 2400 2400mm x

1200mm 0.125

Sheet - 2 x 1200 x 2400 - Mill Finish SHE2.0x1200x2400MF 5005 H34 Mill Finish 2 1200 2400 2400mm x

1200mm 0.125

Sheet - 2 x 1200 x 2400 - Mill Finish - PVC SHE2.0x1200x2400MF-PVC 5005 H34 Mill Finish 2 1200 2400 2400mm x

1200mm 0.125

Sheet - 2.5 x 1200 x 2400 - Mill Finish SHE2.5x1200x2400MF 5005 H34 Mill Finish 2.5 1200 2400 2400mm x

1200mm 0.125

Sheet - 2.5 x 1200 x 2400 - Mill Finish - PVC SHE2.5x1200x2400MF-PVC 5005 H34 Mill Finish 2.5 1200 2400 2400mm x

1200mm 0.125

39

Sheet & Platedescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Sheet - 3 x 1200 x 2400 - Mill Finish SHE3.0x1200x2400MF 5005 H34 Mill Finish 3 1200 2400 2400mm x

1200mm 0.125

Sheet - 3 x 1200 x 2400 - 15um Clear Anodised SHE3.0x1200x2400AN 5005 H34 Clear Anodised 15um 3 1200 2400 2400mm x

1200mm 0.125

Sheet - 3 x 1200 x 2400 - Mill Finish - PVC SHE3.0x1200x2400MF-PVC 5005 H34 Mill Finish 3 1200 2400 2400mm x

1200mm 0.125

Sheet - 4 x 1200 x 2400 - Mill Finish SHE4.0x1200x2400MF 5005 H34 Mill Finish 4 1200 2400 2400mm x

1200mm 0.125

Sheet - 5 x 1200 x 2400 - Mill Finish SHE5.0x1200x2400MF 5005 H34 Mill Finish 5 1200 2400 2400mm x

1200mm 0.125

Sheet - 5 x 1200 x 2400 - Mill Finish SHE5.0x1200x2400MF-5083

5083 H3

21/112Mill Finish 5 1200 2400 2400mm x

1200mm 0.125

Sheet - 6 x 1200 x 2400 - Mill Finish SHE6.0x1200x2400MF 5005 H34 Mill Finish 6 1200 2400 2400mm x

1200mm 0.125

Sheet - 6 x 1200 x 2400 - Mill Finish SHE6.0x1200x2400MF-5083

5083 H3

21/112Mill Finish 6 1200 2400 2400mm x

1200mm 0.125

Propeller Plate

Propellor Plate - 1.6 x 1200 x 2400 - Mill Finish PRP1.6x1200x2400MF 3003

H224 Mill Finish 1.6 1200 2400 2400mm x 1200mm 0.250

Propellor Plate - 3 x 1200 x 2400 - Mill Finish PRP3.0x1200x2400MF 3003

H224 Mill Finish 3 1200 2400 2400mm x 1200mm 0.250

40

Sheet & Platedescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Stucco Plate

Stucco - 0.6 x 1200 x 2400 - Mill Finish STU0.6x1200x2400MF 5005 H34 Mill Finish 0.6 1200 2400 2400mm x

1200mm 0.250

Stucco - 1 x 1200 x 2400 - Mill Finish STU1.0x1200x2400MF 5005 H34 Mill Finish 1 1200 2400 2400mm x

1200mm 0.250

Tread / Chequer Plate

Tread Plate - 1.6 x 1200 x 2400 - Mill Finish TRP1.6x1200x2400MF 5 Bar

5251 Mill Finish 1.6 1200 2400 2400mm x 1200mm 0.125

Tread Plate - 3 x 1200 x 2400 - Mill Finish TRP3x1200x2400MF 5 Bar

5251 Mill Finish 3 1200 2400 2400mm x 1200mm 0.125

Tread Plate - 4 x 1200 x 2400 - Mill Finish TRP4x1200x2400MF 5 Bar

5251 Mill Finish 4 1200 2400 2400mm x 1200mm 0.125

Tread Plate - 5 x 1200 x 2400 - Mill Finish TRP5x1200x2400MF 5 Bar

5251 Mill Finish 5 1200 2400 2400mm x 1200mm 0.125

Tread Plate - 6 x 1200 x 2400 - Mill Finish TRP6x1200x2400MF 5 Bar

5251 Mill Finish 6 1200 2400 2400mm x 1200mm 0.125

41

ArchitecturAldescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Coolroom

Coolroom - Coving - 35mm - Mill Finish COO-35MF 6060 T5 Mill Finish 35 6500 mm 0.500

Coolroom - Coving - 50mm - Mill Finish COO-50MF 6060 T5 Mill Finish 50 6500 mm 0.250

Coolroom - Coving - 75mm - Mill Finish COO-75MF 6060 T5 Mill Finish 75 6500 mm 0.250

Coolroom - Arrowhead - 50 x 25.4 - Mill Finish COO-ARR50x25.4MF 6060 T5 Mill Finish 50 25.4 6500 mm 0.500

Coolroom - Corner Frame - Mill Finish - Suits 50mm

PanelCOO-CNR50MF 6060 T5 Mill Finish 6500 mm 0.250

Coolroom - Door Frame - Mill Finish - Suits 50mm

PanelCOO-DFR50MF 6060 T5 Mill Finish 6500 mm 0.250

Coolroom - F Section - 38 x 38 - Mill Finish - Gap 10mm COO-FS38x38MF 6060 T5 Mill Finish 38 38 6500 mm 0.250

Coolroom - H - Section - Mill Finish - Suits 50mm

PanelCOO-H50MF 6060 T5 Mill Finish 6500 mm 0.250

42

ArchitecturAldescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Flyscreen

Security - Door Corner Stake - Suits 25mm x

11mm (ED7677) - Black Plastic

FLY-CS25x11-PL-BK plastic single unit 0.000

Flyscreen - Double Bottom Track - 22.79 x 10.69 - Mill

FinishFLY-DBLBT-MF Mill Finish 22.79 10.69 6000 mm 0.500

Flyscreen - Double Top Track - 27.79 x 17.09 - Mill

FinishFLY-DBLTT-MF Mill Finish 27.79 17.09 6000 mm 0.500

Flyscreen - Extruded Frame - 25 x 11 - 10um Clear

AnodisedFLY-EXTFR25x11AN Clear Anodised 10um 25 11 5000 mm 0.500

Flyscreen - Extruded Frame - 25 x 11 - Mill Finish FLY-EXTFR25x11MF Mill Finish 25 11 5000 mm 0.500

Flyscreen - Extruded Frame - 25 x 11 - PC - Hammesley

BrownFLY-EXTFR25x11PC-HB brown Powder

Coated 25 11 5000 mm 0.500

Flyscreen - Extruded Frame - 25 x 11 - PC - Black FLY-EXTFR25x11PC-NS Black Powder

Coated 25 11 5000 mm 0.500

Flyscreen - Extruded Frame - 25 x 11 - PC - White FLY-EXTFR25x11PC-PW White Powder

Coated 25 11 5000 mm 0.500

43

ArchitecturAldescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Flyscreen - Sill Winder - Mill Finish FLY-SILW4.3MF Mill Finish 4300 mm 0.500

Flyscreen - Sill Winder - 10um Clear Anodised FLY-SILW5AN Clear Anodised 10um 5000 mm 0.500

Flyscreen - Sill Winder - Mill Finish FLY-SILW5MF Mill Finish 5000 mm 0.500

Flyscreen - Sill Winder - PC - Hammersley Brown FLY-SILW5PC-HB brown Powder

Coated 5000 mm 0.500

Flyscreen - Sill Winder - PC - White FLY-SILW5PC-WB White Powder

Coated 5000 mm 0.500

Flyscreen - Spline - 6mm - Suits FLY-EXTFR25x11MF FLY-SPLINE6 6 per metre 1.000

Flyscreen - Flywire - 760mm - Fibreglass FLY-WIRE0760FG fibreglass 760 per metre 1.000

Flyscreen - Flywire - 910mm - Fibreglass FLY-WIRE0910FG fibreglass 910 per metre 1.000

Flyscreen - Flywire - 1220mm - Fibreglass FLY-WIRE1220FG fibreglass 1220 per metre 1.000

Glazing

Glazing Adaptor - 25 x 25 - 15um

Clear AnodisedGLA-ADT25x25AN 6060 T5 Clear Anodised 15um 25 25 6500 mm 0.500

Glazing Adaptor - 25 x 25 - Mill Finish GLA-ADT25x25MF 6060 T5 Mill Finish 25 25 6500 mm 0.500

44

ArchitecturAldescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Glazing Bead - 25mm - 15um Clear Anodised - Gap

30mmGLA-BEAD25AN 6060 T5 Clear Anodised 15um 25 6500 mm 0.500

Glazing Bead - 25mm - Mill Finish - Gap 30mm GLA-BEAD25MF 6060 T5 Mill Finish 25 6500 mm 0.500

Glazing Channel - 25 x 25 - 15um Clear Anodised GLA-CHA25x25AN 6060 T5 Clear Anodised 15um 25 25 6500 mm 0.500

Glazing Channel - 25 x 25 - Mill Finish GLA-CHA25x25MF 6060 T5 Mill Finish 25 25 6500 mm 0.500

Glazing Channel - 32 x 32 x 3 - 15um Clear Anodised -

With SerrenationsGLA-CHA32x32x3SRAN Clear Anodised 15um 32 32 3 6500 mm 0.250

Glazing Channel - 32 x 32 x 3 - Mill Finish - With

SerrenationsGLA-CHA32x32x3SRMF 6060 T5 Mill Finish 32 32 3 6500 mm 0.250

Glazing Channel - 32 x 45 x 3 - 15um Clear Anodised -

With SerrenationsGLA-CHA32x45x3SRAN Clear Anodised 15um 32 45 3 6500 mm 0.250

Glazing Channel - 32 x 45 x 3 - Mill Finish - With

SerrenationsGLA-CHA32x45x3SRMF 6060 T5 Mill Finish 32 45 3 6500 mm 0.250

louvre

Louvre - Frame - 38.1 x 25.4 - Mill Finish LOU-FRA38.1x25.4MF 6060 T5 Mill Finish 38.1 25.4 6500 mm 0.500

45

ArchitecturAldescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Louvre - Frame - 76 x 25 - Mill Finish LOU-FRA76x25MF 6060 T5 Mill Finish 76 25 6500 mm 0.500

Louvre - Snap-in Flush Filler - 35 x 5.9 - Mill Finish - Suits

LOU-FRA38.1x25.4MFLOU-FRC055MF 6060 T5 Mill Finish 35 5.9 6500 mm 0.500

Louvre - Snap-in Flush Filler - Mill Finish (E32173) - Suits

LOU-FRA76x25MFLOU-FRC100MF 6060 T5 Mill Finish 6500 mm 0.500

Louvre - Oval - 55mm - Mill Finish LOU-OVL055MF 6060 T5 Mill Finish 55 4000 mm 0.500

Louvre - Oval - 100mm - Mill Finish LOU-OVL100MF 6060 T5 Mill Finish 100 6500 mm 0.500

Miscellaneous Shapes

Balustrade Post Foot Cover - UBA201BK BAL-POSTCOVER plastic single unit 0.000

Balustrade Post Foot BAL-POSTFOOT single unit 0.000

Bull Nose Stair Tread - 46 x 15.1 - Mill Finish BNST-MF 6060 T5 Mill Finish 46 15.1 4000 mm 0.500

46

ArchitecturAldescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Cresent Mould - 15.88 x 4.75 - Mill Finish CRM15.88x4.75MF 6060 T1 Mill Finish 15.88 4.75 4000 mm 1.000

Cresent Mould - 25.4 x 4.75 - Mill Finish CRM25.4x4.75MF 6060 T1 Mill Finish 25.4 4.75 4000 mm 1.000

Cresent Mould - 38.1 x 4.75 - Mill Finish CRM38.1x4.75MF 6060 T1 Mill Finish 38.1 4.75 4000 mm 1.000

Drip Mould - 19.05 x 12.7 - Mill Finish DRM-19.05x12.7MF 6060 T5 Mill Finish 19.05 12.7 6500 mm 1.000

Drip Mould - 28.58 x 12.7 - Mill Finish DRM-28.58x12.7MF 6060 T5 Mill Finish 28.58 12.7 3600 mm 1.000

Endcap for 50mm Post - Black ENDCAP50-BK 6060 T5 single unit 0.000

Floor Track - 47.5 x 7 - 15um Clear Anodised FLT47.5x7AN-EP0892 6060 T5 Clear Anodised 15um 47.5 7 4000 mm 0.500

Floor Track - 47.5 x 7 - Mill Finish FLT47.5x7MF-EP0892 6060 T5 Mill Finish 47.5 7 4000 mm 0.500

H-Trim - 13.92 x 1.22 - Mill Finish - Gap 7.14mm HTR-13.92x1.22MF 6060 T5 Mill Finish 13.92 1.22 4000 mm 1.000

47

ArchitecturAldescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

H-Trim - 38.1 x 1.21 - Mill Finish - Gap 12.7mm HTR-38.1x1.21MF 6060 T5 Mill Finish 38.1 1.21 4000 mm 1.000

J-Trim - 23.8 x 12.7 - Mill Finish JTR-23.8x12.7MF 6060 T5 Mill Finish 23.8 12.7 4000 mm 1.000

Marine Sailtrack - 32 x 12 - Mill Finish MARSAILTRACK-MF 6061 T6 Mill Finish 32 12 4000 mm 0.500

Patio - 50 x 44 x 6 - Mill Fin-ish - Beam Connector PAT-BCONNECTOR-MF 6060 TS Mill Finish 50 44 6 per 100

mm 0.015

Patio - 44.3 x 44.3 x 6 - Mill Finish - Beam Splice/Joiner/

End Cap ChannelPAT-BSPLICE44.3x44.3x6MF 6060 TS Mill Finish 44.3 44.3 6 4000 mm 0.250

Patio Column Base Plate - Internal for 50mm square

postPAT-COLBASEPL-MF 6060 TS single unit 0.000

Patio Post Foot - 2SD/K1537Casting 2 Side/K1537 for 50mm Radius Post - Mill

Finish

PAT-POSTFOOT-MF Cast Mill Finish single unit 0.000

48

ArchitecturAldescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Rope Track Flange - Base 43.4mm - Mill Finish RPT-FLANGE-MF 6060 T5 Mill Finish 6500 mm 0.500

Rope Track - Base 28.17mm - Mill Finish RPT-MF 6060 T5 Mill Finish 6500 mm 0.500

Rope Track - Base 28.17mm - PC - White RPT-PC-WT 6060 T5 White Powder

Coated 6500 mm 0.500

Roadsign Channel - 28.5 x 25.5 x 3.2 - Mill Finish - Gap

11mmRSIGNCHA-MF 6060 T5 Mill Finish 28.5 25.5 3.2 6500 mm 0.250

Double Rub Rail End Cap - Cast - 300320 - Right &

Left Hand - Suits RUB-DBL (ET4099)

RUB-DBL-ENDCAP-CA Cast single unit 0.000

Double Rub Rail End Cap - Plastic - 300321 - Right & Left Hand - Suits RUB-DBL

(ET4099)

RUB-DBL-ENDCAP-PL plastic single unit 0.000

Rubrail - Double - Mill Finish RUB-DBL-MF 6060 T5 Mill Finish 6500 mm 0.500

Single Rub Rail End Cap- Cast - 301085 - Right &

Left Hand - Suits RUB-SGL (ET2633)

RUB-SGL-ENDCAP-CA Cast single unit 0.000

Single Rub Rail End Cap - Plastic - 308905 - Right & Left Hand - Suits RUB-SGL

(ET2633)

RUB-SGL-ENDCAP-PL plastic single unit 1.000

49

ArchitecturAldescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Rubrail - Single - Mill Finish RUB-SGL-MF 6106 T6 Mill Finish 4880 mm 0.500

Signbox - 100 x 15 - 15um Clear Anodised SGN-100x15AN 6060 T5 Clear Anodised 15um 100 15 6000 mm 0.500

Signbox - 100 x 15 - Mill Finish SGN-100x15MF 6060 T5 Mill Finish 100 15 6000 mm 0.500

Slat Wall - 28 x 13.5 - Mill Finish - Gap 8.2mm SLATWALL-MF 6060 T5 Mill Finish 28 13.5 2400 mm 1.000

Split Baton - 34.8 x 6.4 - Mill Finish SPLITBATON-MF 6060 T5 Mill Finish 34.8 6.4 3600 mm 1.000

“3”” Sub Head - 32mm - Mill Finish” SUBHEAD32-EP1814 6060 T5 Mill Finish 32 6500 mm 0.250

Table Edge - 20.62 x 6.35 - Mill Finish TAE-20.62x6.35MF 6060 T1 Mill Finish 20.62 6.35 4000 mm 1.000

Table Edge - 27.7 x 12.7 - Mill Finish TAE-27.7x12.7MF 6060 T1 Mill Finish 27.7 12.7 4000 mm 1.000

Table Edge - Moulding - 29.36 x 5.92 - Mill Finish TAE-29.36x5.92MF 6060 T1 Mill Finish 29.36 5.92 4000 mm 1.000

Transport Floor Mould - 45 x 19.83 - Mill Finish TFM45x19.83MF 6060 T5 Mill Finish 45 19.83 5000 mm 0.500

50

ArchitecturAldescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Threshold - 76.2 x 13 - 15um Clear Anodised - 2

WayTHR-076.2x13AN-E01853 6060 T5 Clear Anodised 15um 76.2 13 6500 mm 0.250

“Threshold - 100 x 15 - 15um Clear Anodised - 4””

Wheelchair”THR-100x15AN-EP3022 6060 T5 Clear Anodised 15um 100 15 6500 mm 0.250

Threshold - 101.6 x 13 - 15um Clear Anodised - 2

WayTHR-101.6x13AN-E01854 6060 T5 Clear Anodised 15um 101.6 13 6500 mm 0.250

Ticket Strip - 31.75mm - Mill Finish TICKETSTRIP-MF 6060 T5 Mill Finish 31.75 3657 mm 1.000

Top Hat - 63.5 x 31.75 x 3.18 - Mill Finish TOH63.5x31.75-MF 6060

T591 Mill Finish 63.5 31.75 3.18 5000 mm 0.250

Wallboard - Edge - 21.3 x 8 - Mill Finish - Gap 5.5mm WAL-EDGE-MF 6060 T5 Mill Finish 21.3 8 5010 mm 1.000

Wallboard - H Section - 28.45mm - Mill Finish - Gap

5mmWAL-HSECT-MF 6060 T5 Mill Finish 28.45 6500 mm 0.500

Wardrobe Rail - 30 x 15 x 1.2 - Mill Finish WROBERAIL-MF 6060 T5 Mill Finish 30 15 1.2 6500 mm 0.500

Windscreen Mould- 15.88 x 8.94 - Mill Finish - Gap

4.88mm - U FinWSCRNMLD-MF 6060 T1 Mill Finish 15.88 8.94 5000 mm 0.500

Zed - 22 x 19/19 x 3 - Mill Finish ZED22x19x19x3MF 6060

T591 Mill Finish 22 19/19 3 6500 mm 0.500

51

ArchitecturAldescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Qubelok

Qubelok - One Leg extru-sion - 10um Clear Anodised QUB-1LAN 6060 T5 Clear Anodised 10um 6500 mm 0.125

Qubelok - One Leg extru-sion- 15um Black Anodised QUB-1LAN-BK 6060 T5 Clear Anodised 15um 6500 mm 0.125

Qubelok - One Leg extru-sion - Mill Finish QUB-1LMF 6060 T5 Mill Finish 6500 mm 0.125

Qubelok - Endcap 25 Square Plastic - Black QUB-ENDCAP Nylon single unit 0.000

Qubelok - P13 - Castor Wheel QUB-P13 Nylon single unit 0.000

Qubelok - P15 - Castor Socket QUB-P15 Nylon single unit 0.000

Qubelok - P20 - 2 Leg Joiner Piece QUB-P20 Nylon single unit 0.000

52

ArchitecturAldescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Qubelok - P30 - 3 Leg Joiner Piece QUB-P30 Nylon single unit 0.000

Qubelok - P31 - 3 Leg Joiner Piece QUB-P31 Nylon single unit 0.000

Qubelok - P40 - 4 Leg Joiner Piece QUB-P40 Nylon single unit 0.000

Qubelok - P41 - 4 Leg Joiner Piece QUB-P41 Nylon single unit 0.000

Qubelok - P50 - 5 Leg Joiner Piece QUB-P50 Nylon single unit 0.000

53

ArchitecturAldescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Qubelok - P60 - 6 Leg Joiner Piece QUB-P60 Nylon single unit 0.000

Qubelok - 7.5mm Receptor - 10um Clear Anodised QUB-REC7.5AN 6060 T5 Clear Anodised 10um 6000 mm 0.125

Qubelok - 7.5mm Receptor - 15um Black Anodised QUB-REC7.5AN-BK 6060 T5 Black Anodised 15um 6000 mm 0.125

Qubelok - 7.5mm Receptor - Mill Finish QUB-REC7.5MF 6060 T5 Mill Finish 6000 mm 0.125

Qubelok - 25.4 x 25.4 x 1.2 - 10um Clear Anodised

- RadiusQUB-STDAN 6060 T5 Clear Anodised 10um 25.4 25.4 1.2 6500 mm 0.125

Qubelok - 25.4 x 25.4 x 1.2 - 15um Black Anodised -

RadiusQUB-STDAN-BK 6060 T5 Black Anodised 15um 25.4 25.4 1.2 6500 mm 0.125

Qubelok - 25.4 x 25.4 x 1.2 - Mill Finish - Radius QUB-STDMF 6060 T5 Mill Finish 25.4 25.4 1.2 6500 mm 0.125

Security

Security - Sliding Door - 15 x 8 - Mill Finish - Bottom

TrackSEC-BTMTRACKMF 6060 T5 Mill Finish 15 8 4300 mm 1.000

Security - Sliding Door - 15 x 8 - PC - Night Sky Satin -

Bottom TrackSEC-BTMTRACKPC-NS 6060 T5 Black Powder

Coated 15 8 4300 mm 1.000

Flyscreen - Bugstrip - 15.9mm - Mill Finish SEC-BUGSTRIP15.9MF Acrylic Mill Finish 15.9 6500 mm 0.500

54

ArchitecturAldescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Security - Bugstrip Seal - Schlegel PS13 - Suits SEC-

BUGSTRIP15.9MFSEC-BUGSTRIPSEAL-PS13 Plastic per metre 1.000

Security - Door Corner Stake - Suits ED9692 SEC-DR-CS-ED9692 6060 T5 single unit 0.000

Security - Door Frame - Mill Finish SEC-DR-FR-MF 6060 T5 Mill Finish 6300 mm 0.250

Security Door - Top Roller Track - Mill Finish - Mates

With E17678SEC-DR-TRT-MF 6060 T5 Mill Finish 6500 mm 0.250

Security Door - Top Track Cover - Mill Finish - Mates

With E17677SEC-DR-TTC-MF 6060 T5 Mill Finish 6500 mm 0.500

55

ArchitecturAldescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

Security - Grill - 750 x 2050 - Mill Finish - (M127) SEC-GRL0750x2050MF Mill Finish 750 2050 single unit 0.000

Security - Grill - 920 x 2050 - Mill Finish - (M127) SEC-GRL0920x2050MF Mill Finish 920 2050 single unit 0.000

Security - Grill - 1250 x 2050 - Mill Finish - (M127) SEC-GRL1250x2050MF Mill Finish 1250 2050 single unit 0.000

Security - Privacy Mesh - 750 x 2000 - Black SEC-MESH0750x2000-BK 750 2000 single unit 0.000

Security - Privacy Mesh - 900 x 2000 - Black SEC-MESH0900x2000-BK 900 2000 single unit 0.000

Security - Privacy Mesh - 1200 x 2000 - Black SEC-MESH1200x2000-BK 1200 2000 single unit 0.000

Security - Offset Interlock - 4mm - Mill Finish SEC-OFFINT4MF 6060 T5 Mill Finish 4 4880 mm 1.000

Security - Offset Interlock - 7mm - Mill Finish SEC-OFFINT7MF 6060 T5 Mill Finish 7 4260 mm 1.000

56

Scaffold PlankSdescription Product Code Alloy Colour Finish micron dim1 dim2 dim3 Size min

Sale

3m Scaffold Plank SCA-3M 6063 T5 single unit 0.000

4m Scaffold Plank SCA-4M 6063 T5 single unit 0.000

5m Scaffold Plank SCA-5M 6063 T5 single unit 0.000

6m Scaffold Plank SCA-6M 6063 T5 single unit 0.000

Scaffold End Plank Cap SCA-ENDCAP 6063 T5 single unit 0.000

57

Hardwaredescription Product Code

Silicone 300ml,TRANSLUCENTBostik roof & gutter silicone cartridge - permanent flexible seal 241008

Adhesive, 300ml cartridge Bostik no more nails, neoprene adhesive - easy and fast to apply 149063

Polyurethane sealant, GREY, 300mlBostik, seal n flex 1, 300ml cartridge pack 246158

Polyurethane sealant, GREY, 600mlBostik, seal n flex 1, 600ml sausage pack 216275

Polyurethane sealant, BLACK, 600mlBostik, seal n flex 1, 600ml sausage pack 217808

Polyurethane sealant, fast cure, 600mlBostik seal n flex (fast cure) 600ml sausage pack GREY 247227

58

Hardwaredescription Product Code

Rivet 3.2mm, dome head 3.2mm (1/8”) diameter, alum w steel stem, 4mm grip, 100 pack RAS403DA

Rivet 4mm, dome head 4mm (5/32”) diameter, alum w steel stem, 5.6mm grip, 100 pack RAS504DA

Rivet 3.2mm, counter sunk head 3.2mm (1/8”) diameter alum rivet, steel stem, 4mm grip, 100 pack RAS403CA

Black rivet 3.2mm, dome head 3.2mm (1/8”) diameter, alum w steel stem, 4mm grip, 100 pack RAS403DA-N/Sky

White rivet 3.2mm, dome head 3.2mm (1/8”) diameter, alum w steel stem, 4mm grip, 100 pack RAS403DA-S’Mist

Pop riveter - handWith 4 interchangeable nozzle sizes: 2.4mm, 3.2mm, 4.0mm and 4.8mm TNA2000

Wafer head screw, 16mm Low profile, coarse thread, galvanised, 10.16 diameter, 100 pack SDR10016W

Wafer head screw, 22mm Low profile, coarse thread, galvanised, 10.16 diameter, 100 pack SDR10022W

Wafer head screw, 30mm Low profile, coarse thread, galvanised, 10.16 diameter, 100 pack SDR10030W

Pan head screw, 12mm Phillips drive, fully threaded, clear zinc, 8.18 diameter, 100 pack SDZ08012P

Pan head screw, 16mm Phillips drive, fully threaded, clear zinc, 8.18 diameter, 100 pack SDZ08016P

Pan head screw, 20mm Phillips drive, fully threaded, clear zinc, 8.18 diameter, 100 pack SDZ08020P

Counter sunk screw, 25mm Countersunk head, self drilling, galvanised, 8.18 diameter, 100 pack SDR08025C

Counter sunk screw, 30mm Countersunk head, self drilling, galvanised, 10.24 diameter, 100 pack SDR10030C

59

Hardwaredescription Product Code

Double sided polyester liner tape 12mm x 50m x .22mm UV and temperature tolerant B789-12

Double sided VHP foam tape 12mm x 33m x 2.3mm Very high performance, trade quality T723GX0-12

Aluminium foil tape 48mm x 50m x .30mic B1012-48

PVC protection tape, black 48mm x 66m x .115mic. Medium tack, UV resistant, easy off B421-48

Hand pressure roller Tape rolling tool, 60mm wheel XL-50

60

Hardwaredescription Product Code

Surface spray cleaner Removes grease, contaminants & adhesive residue. Evaporates cleanly X-440

Cutting wheel - 4 pack 100 ml wheel, 1mm diameter, 16mm centre - for aluminium panel / sheet PC00610

Counter sink drill bit To make counter sunk holes D120100

Snap off blades - 5 pack 18mm wide TKM1300

Drill bit set - set of 12 Size 1 - 6mm, for drilling metal or wood - metal case PP00080

Bit driver set, No #2 - 10 pack 65 mm, double ended power screwdriver bits, phillips head PRD1120

61

Hardwaredescription Product Code

Utility knife High visibility, includes 2 blades TKM1210

Utility blades - 5 pack Storage case with snap blade function TLD9001

Hacksaw Adjustable frame, takes 25 and 30mm blades S040150

Hacksaw blades - 12 pack 300mm - high carbon steel. 6pc 18 teeth blades, 6 pc 24 teeth blades TKM1325

Coping saw Includes 5 blades: coarse, medium, fine, extra fine, hacksaw TTH1000

Coping saw blades - 10 pack 14TPI, trade quality replacement blades 5094020

Handling gloves Ronin - nylon shell, nitrile foam palm coating for added grip & protection Ronin – L

Ruler, stainless steel - 1 metre Metric / imperial with conversion system on back R093076

62

Hardwaredescription Product Code

Caulking gun ratchet Suits all standard cartridges EC97053

Tape measure 5 metre - soft rubber grip TKM2030

Aviation snips Straight blades - for cutting sheet metal and alloy ET91221

Mallet - rubber 225 grams - Ideal for sheet metal work TKM8005

File - half round Bastard cut, 200mm, soft grip handle FTH0200

Clear safety glasses Sport series, 99.99% UV resistant SCP2000

63

technical informationAlloy Code description machineable Corrosion

resistant Anodisable Formable Weldable rolled / extended

2011 Machining alloy used for parts produced on repetition machines. 1 4 4 3 4 E

3003 Chemical equipment, sheet metal work, rigid foil, containers & closures. 3 1 3 2 1 R

5005 General purpose alloy for sheet metal work. Can be welded. 3 1 2 1 1 R

5052 Medium strength alloy with good ductility. Suitable for welding with high corrosion resistance particular for marine applications. 3 1 3 1 1 R

5083 High strength alloy used in transport, marine and structural applications. 2 1 3 2 1 R

5251 Medium strength alloy with good ductility. Suitable for welding with high corrosion resistance particular for marine applications. 3 1 3 1 1 R

6005 Good strength for structural applications. 2 1 3 2 1 E

6060The most commonly used extrusion alloy. Used for all architectural applications, light duty structural framework. Can also be chemically brightened for moulds and trims.

3 1 1 1 1 E

6061 Structural application where strength and corrosion resistance is needed. Transport applications. 2 1 3 2 1 E

6063The most commonly used extrusion alloy. Used for all architectural applications, light duty structural framework. Can also be chemically brightened for moulds and trims.

3 1 1 1 1 E

6082 For structural applications. Similar to 6061 with higher mechanical properties. 2 1 2 2 1 E

6106 A medium strength alloy. Used for architectural applications where additional strength is required and for structural applications not involving welding. 3 1 1 2 1 E

6351 Structural application where strength and corrosion resistance is needed. Transport applications. 2 1 3 2 1 E

(rated in decreasing order of merit)

64

technical informationTemper Code description

T1 Cooled from an elevated temperature shaping process and naturally aged to a substantially stable condition.

T2 Cooled from an elevated temperature shaping process, cold worked and naturally aged to a substantially stable condition.

T3 Solution heat treated, cold worked and naturally aged to a substantially stable condition.

T4 Solution heat treated and naturally aged to a substantially stable condition.

T5 Cooled from an elevated temperature shaping process then artificially aged.

T6 Solution heat treated then artificially aged.

T7 Solution heat treated and overaged/stablilized.

T8 Solution heat treated, cold worked, then artificially aged.

T9 Solution heat treated, artificially aged, then cold worked.

T10 Cooled from an elevated temperature shaping process, cold worked, then artificially aged.

Hardening Code description

H1 Strain hardened only.

H2 Strain hardened and partially annealed.

H3 Strain hardened and stabilized.

H4 Strain hardened and lacquered or painted. This assumes that thermal affects from the coating process affect the strain hardening; seldom encountered.

65

Aluminium Trade Centre Pty ltd ABN 1515 5890 467

Tel (03) 9544 6659Fax (03) 9544 6650

www.aluminiumtc.com.ausales@aluminiumtc.com.au