catalogue 2019/20: scope storage€¦ · single door pass through x-ray rated ceiling height less...

+61 7 5478 [email protected]

PO Box 532, Buderim, Qld, 4456

55 Cordwell Rd, Yandina, Qld, 4561

CATALOGUE 2019/20:SCOPE STORAGE

All images are indicative only*

.

Scope Drying & Storage Cabinets Maximise scope storage validity: minimise risk of damage

• Endoscope storage & drying cabinet.

• 8 scope capacity (drawer.)

• 600mm(W) x 600mm(D) x 1810mm(H) (2140mm with SAB.)

• Compliant with EN16442.

• Compatible with all AER and scope brands.

• RFID scope data monitoring

• Baskets and autoclavable hose kits included.

• Endoscope storage & drying cabinet.

• 9 scope capacity (hanging.)

• 600mm(W) x 600mm(D) x 2335mm(H).

• Compliant with EN16442.

• TGA approved.

• Approved 7-day storage.

• Compatible with all AER and scope brands.

• RFID scope data monitoring.

RotaScope SlidaScopeRotaScope Core• Can be upgraded to

EN16442 Compliant

• 9 scope capacity (hanging.)

• Endoscopy storage & drying cabinet

• TGA approved

• Flexible door configuration (X-Ray pass through door optional)

• Freestanding and relocatable

Cabinet information screen

Baskets & autoclavable hose kits

Shared air box to supply multiple cabinets

2Catalogue 2019/20: Scope Storage Smartline


Cabinet + Data + Air =EN16442 Compliance

SHARED AIR BOX• Converts cabinet to a forced air drying

cabinet compliant with EN16442 standards.

• Independent HEPA filtered shared air supply.

• One shared air box (SAB) can be used for two

cabinets for cost savings.

• Low maintenance.

DATA SYSTEM• Data system supports evidence-based best

practice.

• Utilises RFID operator and scope tags to record

and report operator activity and individual

scope status from washer to bedside or washer

to cabinet to bedside.

• Reduces the risk of reporting errors and in

alignment with guidelines.

• Includes stringent monitoring of cabinet

temperature, pressure and humidity.

• Utilises RFID operator and scope tags to

record and report individual scope status.

COMPLIANCE• RotaScope & SlidaScope endoscope storage

& drying cabinets awarded Certificates of

Compliance to EN16442.

• Independent testing by Biotech-Germande

in France confirmed both the RotaScope &

SlidaScope comply with all nine applicable

requirements under EN16442 Standards.

• Testing incorporated a diverse range of

scope families covering all of the major

endoscope manufacturing brands, including

Olympus, Fujinon and Pentax.

Typical ScopeFlow Path

Scan scope into and

out of AER washer

Print reciept of scope processing & storage record

Washer validation & print receipt

(scope processing

record)

Storage in RotaScope

cabinet

Manual wash & leak

test

Catalogue 2019/20: Scope StorageSmartline3


Rota

Sco

pe

™• Pass through or X-Ray rated

• RFID scope data monitoring:

- Countdown timers for each scope

- Electronic data backup

- Live view of cabinets

• Scope validation labelling

• Service options available

• Interlocking keyless entry

• Door frosting options

FEATURES:

• Endoscope capacity = 9

• EN16442 compliant

• Independent HEPA filtered air supply

• Small footprint - 600mm(L) x 600mm(W) x 2335mm(H) (or 2665mm(H) with shared air box)

• Electronic tracking - washer to patient

• Colour lighting indicates when cabinet cleaning required

• Compatible with all AER and scope brands *TM

pe

nd

ing

| +61 7 5478 9977 | [email protected] | www.SmartlineMedical.com |

Cabinet information screen: Individual countdown timers on right indicate scope status. Cabinet tem-

perature, humidity, pressure and manifold vacuum shown on

left.



Slid

aSc

op

e™

• Pass through or X-Ray rated

• Utilises universal scope basket system

• RFID scope data monitoring:

- Countdown timers for each scope

- Electronic data backup

- Live view of cabinets via software

• Scope validation labelling

• Tiered service options

• Interlocking keyless entry

• Door frosting options

• Endoscope capacity = 8

• Compliant to EN16442 standards

• Independent HEPA filtered air supply

• Small footprint - 600mm(L) x 600mm(W) x 1810mm(H) (or 2140mm(H) with shared air box)

• Electronic tracking - washer to patient

• Colour lighting indicates when cabinet cleaning required

• Compatible with all AER and scope brands

Utilises hook-up connection hoses

FEATURES:

*TM

pe

nd

ing

SlidaScopeTM*

| +61 7 5478 9977 | [email protected] | www.SmartlineMedical.com |

Allows individual scope monitoring



Door Type

Single door Pass through X-Ray rated(09.SC-G-S) (09.SC-G-P) (09.SC-G-X)

Hook Type

EndoScope

Ceiling HeightLess than 2700mm

YES NO

• Connects adjacent rooms

• Allows increased workflow

• Standard glass door

• Has data & locking


• Door screens against X-Ray’s

TOE Combination

Combination:

Number of cabinets:



SlidaScopeTM*

Door Type

Single door Pass through X-Ray rated


YES NO







(09.DC-B-SS) (09.DC-B-SP) (09.DC-B-SX)

Number of cabinets:


All images are indicative only*| CSSD | ENDOSCOPY STORAGE | STERILE STORAGE | OPERATING THEATRES | WORKPLACE HEALTH & SAFETY |


Rota

Sco

pe

™ C

ORE

*TM

pe

nd

ing

CORE

FEATURES:

Future-Proofed Probe & Scope Storage

Minimise Risk of Probe & Scope Damage

Hooks available for TOE/ENT Probes,

Transrectal & Transvaginal Probes

• Can be upgraded to be EN16442 Compliant

• Adaptable modular design can be updated in line with department’s changing needs

• Optional shared air box supplies Independant HEPA air generation for up to 2 cabinets (Air hose kits for up to 9 scopes provided)

• Australian made and serviced

• Flexible configuration options

• Freestanding / relocatable

• Pass through or X-Ray rated options available

• Small footprint

• Electronic key pad door lock

• LED lights activate when door opens

• Door frosting options available



Door TypeSingle door Pass through X-Ray rated


YES NO







(09.SC-GC-S) (09.SC-GC-SP) (09.SC-GC-SX)

CORE

ENT Double Stack

YES NO

Capable of holding 18 ENT scopes, 9 scopes on each level

Number of cabinets:



• 12mm Opal acrylic bulkhead.• Includes: 2 x 12mm opal sides, 1 x 12mm opal front, front and side flashing strips, required fixings.• 600mm(W) x 330mm(H) x 500mm(D).• Delivered flat packed. Installation available upon request.

RotaScope Bulkhead (09.SC-BH-1)Acrylic bulkhed for installation above RotaScope cabinet

Shared Air Box (09.SAB-B)HEPA filtered air & vacuum supply for 1 or 2 cabinets

• Generates HEPA filtered air & vacuum supply for 1 or 2 scope storage cabinets.• Acrylic housing reduces noise & vibration. • Designed to sit on top of one cabinet if ceiling height above 2.7m.• Optional wall mounting kit available if ceiling height under 2.7m.• Dimensions 60cm x 60cm x 33.4cm high.• Requires 240V 50Hz single phase power 6.5A.• Airflow capacity: 47m3/hour at -230mbar vacuum/+290mbar

AIR

• Connects to & extends 1m hoses supplied with RotaScope.• Hoses can be cut to shorter length if required.• 09.SC-SB-EHK5 includes 5m shared air box control cable.• 09.SC-SB-EHK10 includes 10m shared air box control cable.• Note: 2 Kits may be required for wall mounted SAB.

Hose Extension Kit - 5m length - (09.SC-SB-EHK5)10m length - (09.SC-SB-EHK10)Extension air/vacuum hose kit for one RotaScope cabinet

• 2 x 500mm x 500mm Stainless steel wall brackets.• 1 x 600mm x 700mm Wall mounting board (16mm melamine).• Wall mount screws not supplied and site specific components

must be decided upon and purchased prior to installation.• NOTE: Structural engineer required to inspect & certify location

is structurally sound to support 60kg cantilevered load.

Shared Air Box Wall Mount Kit (09.SC-SB-WMK)Shared air box wall bracket kit



DATA

• Initial system starter kit - can be modified to suit site specific requirements.

• 1x SATO sticker printer kit (additional kits available at extra cost).• 1x AER station kit (additional kits available at extra cost).• 1x 16 Port switch (8 port & 24 port also available) (not shown).• Minimum specification PC to be supplied by client. Please contact

the Sales Team for details.

Data System Starter & Software Kit(09.SY-SSK)

SATO Sticker Printer Kit(09.SC-SY-PS)

• Sticker label roll.• 40 x 62mm - 40mm Core - 800 labels per roll.• Min order quantity = 10 rolls.

Label Roll (suitable for SATO Sticker Printer Kit)(46.L4062-40)

Scope tracking and countdown timing of Scope storage validility

• Used to print out one or more stickers showing details relating to last processing & remaining validity time of scope.

• Would suit use in theatres, endoscopy cleaning room etc.• 1x SATO sticker printer & power supply.• 1x printer station & 5m cable to connect to data starter

system.• Longer cables are available at additional cost.• Recommend at least one printer kit for the scope reprocessing

room + additional printer kits for each procedure room where pass-through cabinets are accessed.

• 2x Label rolls included - additional rolls can be ordered in packets of 10 (46.L4062-40).

Additional printer for scope processing and storage records

• For use with Smartline’s RotaScope & SlidaScope cabinets.• Kit includes: 1x laptop; 1x RFID dongle for programming tags;

10x loan scope tags; 16GB USB flash drive (software and manuals installed.)

Scope Cabinet Laptop Kit(09.SC-LK)



PLEASE NOTE: Hose kits to suit other scope brands are available upon request. Please contact the Smartline Sales Team on (07) 5478 9977 or email [email protected].

• Stainless steel wall mount bracket - 90 degrees.• Suits the 09.SC-SY-SP SATO sticker printer.• Printer will be set horizontally. Incorporates power pack

bracket.• Mounting bracket only - printer & associated parts are not

included. Wall fasteners are not included.

Printer Wall Mount Bracket Kit - 90 Degrees(09.SY-SP-WM)

• Suits up to two AER chambers (1st AER writer kit is included with the starter kit).

• Allows washer details to be added to scope tag at each cycle.• Kit includes: 1x washer station, 2x washer ID plaques, 1x 5m

connection cable - longer cables available at additional cost.

AER Expansion Kit(09.SC-SY-AE)Optional washer / automatic endoscope reprocessor (AER) writer kit

ACCESSORIES

• RotaScope & SlidaScope cabinet set of vacuum hoses to suit most Olympus endoscopes.

• Kit consists of: - 9x 47.SC-AWJ - Air/Water junction blocker. - 9x 47.VHB-1-BV14-4 - Biopsy valve hose. - 9x 47.VHC-1-6 - Connection hose. - 9x 47.VHM-AW - Air/Water channel connection hose. - 9x 47.VHW-1-AC-4 - Auxiliary connector hose.

Olympus Endoscope Vacuum Hose Kit(09.VHK-OL)


+61 7 5478 [email protected]

PO Box 532, Buderim, Qld, 4456

55 Cordwell Rd, Yandina, Qld, 4561

catalogue 2019/20: scope storage€¦ · single door pass through x-ray rated ceiling height less...

Documents