catalogue 2011
DESCRIPTION
Parts from Bradley Doublelock Ltd.TRANSCRIPT
2011
Revis
ion
LL
1 0
9/0
4//
20
10
CATALOGUE With Exploded Diagrams
BRADLEY DOUBLELOCK LTD
Victoria Works, Bingley,West Yorkshire, BD16 2NH
Tel: 00 44 (0)1274 560414, Sales: 00 44 (0)1274 516760, Fax: 00 44 (0)1274 510294
Email: [email protected]
-------
Unit 6 Monksland Trading Centre, Galway Road.
Athlone, County Roscommon, Eire Tel + Fax 00 353 (0)9064 94628, Mobile 0842 533928
Take the worry out of hitching, use a
Bradley Autojaw and be sure it’s
connected
C O N T E N T S P A G E
RELIABILITY COUPLED WITH INNOVATION 5
PAGE
1 Hints & Tips
6
2 Managing Directors Foreward
7
3 Bradley Profile
8
4 Hydratow Delta Coupling
9
5 Hydratow EH Coupling
13
6 Hydratow Square Coupling
17
7 Hydratow Adjustable Height Coupling
23
8 Non-Braked Coupling
27
9 Non-Braked Eyes
29
10 Spring Damped Over-Run Coupling
31
11 Rotalok Jockey Wheel
35
12 Heavy Duty Jockey Wheel
39
13 Prop Stands
43
14 AutoJaw™
49
15 Towing Jaws 51
17 AutoHead™
55
18 Voyager Axles
59
19 Voyager Plus T-Chassis
63
20 Brakes Explained
67
21 Spare Parts, Security Devices and Lights
69
22 D-Value Graphs 71
All Bradley Hydratows are now
supplied with an
AutoHead™
Also available in 30mm,40mm,50mm British standard eyes
and DIN and Nato versions.
Contact Sales for further Information
on
01274 516760
Contact Sales for further Information
on
01274 516760
The Bradley Flipper
The Flipper
Tow-Ball Cover
Made from heavy gauge steel plate, heavily
chrome plated to give an attractive
appearance to what would otherwise be an
eyesore on your car. Springs easily into
position over the Tow-ball, after towing, to
give protection to hands and clothing when
using the car boot.
The Flipper is easy to fit using the instruction
leaflet supplied.
Supplied in Bright decorative chrome
Care must be taken when
purchasing a Stabiliser to
ensure lack of interference
with the flipper action
Approvals & Compatibility Calculations. All braked trailers used within the European Community are subject to stringent approval regulations, these regulations cover
everything from the material used in the manufacture of them to the way the work and how they perform whilst in
operation. Basic descriptions of the regulations are as follows:
71/320 – Covers the mandatory use of hydraulically damped couplings and compatible braking systems, originally covered
standard or none auto reversing brakes. Came into force on the 1st of October 1982.
85/647 – Updated 71/320 and made the use of Auto-reversing brakes mandatory, came into force on the 1st of April 1989.
98/12 -- Superseded both of the above.
94/20 – Covers the structural ability of the products to withstand the forces applied during use.
When requesting a trailer compatibility calculation to be carried out, please ensure the following information has been given.
1. MAXIMUM LADEN WEIGHT OF THE TRAILER Includes the trailer weight and it’s load.
2. COUPLING MAKE AND TYPE Usually marked on the top or side of the main coupling body.
3. BRAKE SIZE AND TYPE Normally stamped into the rear of the brake assembly.
4. TYRE SIZE, TYPE AND ROLLING RADIUS OF TYRE The size is moulded on but you may have to contact
the Tyre or Trailer manufacturer for precise measurement
5. NUMBER OF AXLES Usually single or twin axle or sometimes triple, it also helps if you can tell us how they are
configured ie:
Single – 1 Axle, Twin / Triple close coupled – 2 or 3 axles which are mounted within 1 metre of each other or Twin/
Triple turntable steered 2 or 3 axles where the front axle is mounted on a turntable arrangement and the 1 / 2 rear
axles are at the back of the trailer ( on Triple axle turntables the rear two are usually close coupled)
6. TRAILER MANUFACTURERS NAME Usually marked on the top or side of the main coupling body.
7. TRAILER MODEL TYPE Usually marked on the top or side of the main coupling body.
8. BRAKE OPERATING SYSTEM “CABLE” or RODS?
Is it 1 rod going back from the coupling which connects to two, four or six sheathed cables which lead to the brakes,
note this system may incorporate further shorter rods within the system.
Is it rods all the way through from coupling to axles?
Is it wire cable all the way through?
Is it wire cable back to a connecting plate or balance bar and the sheathed cables from there to the brakes?
If your coupling is an Adjustable Height type it will contain other cables within the system, contact sales for advice.
RELIABILITY COUPLED WITH INNOVATION
H I N T S & T I P S
Bradley reserves the right to modify specifications without prior notice.
Remember:
Bradley jaws, pins and hooks are not compatible with German type “DIN” eyes
unless otherwise specified
Bradley provide both the eyes and jaws/hooks to ensure compatibility
RELIABILITY COUPLED WITH INNOVATION 6
1. Don‟t use a Din eyeshaft with a non
Din Towing jaw
2. Fittings (e.g. tailgates, hatches etc.) –
these and any load on the trailer must
be properly secured
3. Tow on the pin, Brake on the jaw
4. If it’s not approved, it‟s not covered!
5. Ensure your jockey wheel is
tightened and lodged so as to allow
safe operation of brakes under all
circumstances
6. When turning, allow more room
when towing
7. Reversing – Use the opposite lock to
direction required, DO NOT allow
trailer to jack-knife
8. Wing Mirrors – Use extended ones
if towing a wide trailer
9. Snaking – If your trailer starts to
snake DO NOT brake. Slow down
gradually
10. Coupling locks – always use one
approved by the manufacturer
11. Pitching – Check the nose weight of
the trailer, excessive nose weight is
dangerous
12. Spare wheel for trailer – check its
condition before setting off, always
carry a spare
13. Trailer parking – fully apply
brakelever and chock the wheels
14. Maintaining your trailer – although
an MOT is not yet mandatory, it is
important to service your trailer
regularly. It is a legal requirement to
ensure your trailer is roadworthy
15. Drop plate – should only be used to
lower a towball, never to raise one.
Height of ball should be between 350
and 420mm
16. Wheel nut torque setting – consult
trailer manufacturer for correct
setting
17. Suspension aids – Use only approved
ones
18. Brakes – Any brakes fitted must
work, they need regular adjustment to
maintain efficiency
19. Trailer Gross Weight – Make sure
your vehicle is capable of towing the
trailer safely, consult your vehicle
handbook or manufacturer if unsure,
DO NOT GUESS
20. Tyres – These are subject to the same
laws as the tyres on a car. Check
pressures regularly
21. Lights – These are subject to the
same laws as your car and must work
22. Number Plate – It must be to the
legal standard and must by law match
the towing vehicle
23. Breakaway cables – ALWAYS use
the manufacturer‟s spare part as it has
M A N A G I N G D I R E C T O R S F O R E W O R D
RELIABILITY COUPLED WITH INNOVATION 7
“This is a comprehensive document that has evolved in response to market
requests and valuable feedback. We hope that you will find the content both
informative and „user friendly‟ as it is part of our continuing commitment to
provide extraordinary customer satisfaction.
In times of increased competition, Bradley‟s focus on service and quality will
remain the core competence upon which we wish to be bench marked.
We thank you for your continued confidence in us and we give you our
commitment that we will offer exceptional customer support.”
Steven Edwards
8 RELIABILITY COUPLED WITH INNOVATION
radley Doublelock Ltd is widely recognised by many as the leading U.K. designer and manufacturer of a specific range
of trailer components for use in the light trailer & towing industry. Originally established by H & K Bradley in 1948, Cleckheaton West Yorkshire, Bradley quickly grew to become a generic name synonymous for quality within the trailer manufacturing fraternity and by end users alike. It is well recognised as an innovative designer and producer of reliable robust products, which have determined the benchmark for the poorly regulated U.K. market. The Bradley head office and works are based in Bingley, West Yorkshire, which is approximately six miles north of Bradford, well served by an extensive motorway network affording easy access
to all U.K. Trailer Manufacturers and their 85 distributors in all parts of the
country. It is also well placed to service export markets through the ports of Liverpool and Hull. Bradley Doublelock Eire located in Athlone County Roscommon is the Irish distribution centre for all Bradley products in Ireland, established to directly service the needs of a growing number of Trailer Manufacturers both in the North and South of Ireland and in support of a country wide distribution base. Bradley retains a professional engineering/design team at its manufacturing unit in Bingley that ensures harmonisation of all the processes involved in maintaining and promoting a level of quality unsurpassed in the towing industry. It is also readily available to support their customer base in all technical matters including approvals. This is supported by a dedicated supply base that is geographically located to ensure effective communication and traceability with the Bradley team whether it be in the development of new products or everyday production. Many of the suppliers are long standing and the process or service offered is the result of many years
of integration with the Bradley team and culture and which is considered to add significant appeal to its often safety critical products. Bradley Doublelock is an accredited ISO 9001 Company (LRQ0928546) that ensures a consistency of product quality and standardisation of original equipment and spares performance. All products meet the latest EC regulations at minimum with many designs specifically engineered to meet the endemic rigours of the U.K and Irish markets or universally where the true professional and safety conscientious user requires guaranteed integrity at the towing interface. Bradley prides itself on the level of service afforded to its client base and the towing industry, many of their products and spares have an off the shelf availability supported by a dedicated, experienced and well trained technical sales team capable of advising on all aspects of their products and application. The team is also up to date with many aspects of the changing law and legislation directly affecting the towing market and individual users Bradley Doublelock Ltd continues to strive for the maintenance of quality and standards that appeal to serious industrial and “safety first” users, who recognise the critical nature of many of their products and the significant added value and surety that is integral in the Bradley name. In the words of John Ruskin: “It is unwise to pay too much, but it is worse to pay too little. When you pay too much, you lose a little money… that is all. When you pay too little, you sometimes lose everything, because the thing you bought was incapable of doing things it was bought to do. The common law of business balance prohibits paying a little and getting a lot… it cannot be done. If you deal with the lowest bidder, it is well to add something for the risk you run. And if you do that, you will have enough to pay for something better.”
B
BRADLEY PROFILE
Hydratow
Delta Couplings
H35MB
Only Bradley can come up with the most dependable product -
the only option for the rigours of today‟s customers‟
requirements.
Standards:
•2 Year Warranty
•High Corrosion Resistance
•Robust Cast Iron
•94/20/EC Approved
•71/320/EC Approved
•Locking Facility
•Lifetime tested to 2 Million cycles
Features:
•Built to meet UK operational needs
•Integral Jockey Hole
•Eyes/Head option
•Brakelever options
•AutoHead™ option
•Posilite™ easy action brakelever
•Optional low profile on head
9 RELIABILITY COUPLED WITH INNOVATION
0
20
40
60
80
TRAVEL IN MM
FO
RC
E IN
KG
5 10 15 20 25 30 35 40 45 48 50
Standard
Posilite™
Brakelever Effort Comparison
30% easier in its operation
T E C H N I C A L I N F O R M A T I O N Approved to: EC94/20; 71/320 Standards
Diagram appropriate for H09, H17, H26. Any
requirement for H35 please contact sales
CouplingCapacity
Kg
Nose
Load
Nett
Weight Kg71/320 94/20
HU3L 450 - 900 100 19.6 CD84/003 Ext 3 e11*94/20*0101*00
HU3H 850 - 1700 100 19.6 CD84/004 Ext 3 e11*94/20*0102*00
HU3HE 1650 - 2750 100 19.6 CD87/001 Ext 4 e11*94/20*0104*00
HU12 2250 - 3500 120 26.1 CD87/002 e11*94/20*0106*00
Coupling50mm
Head
30mm
Eye
40mm
Eye
50mm
Eye
76 NATO
Eye
40mm
DIN Eye
HU3L H09MB H093B H094B H095B H09NB H09DB
HU3H H17MB H173B H174B H175B H17NB H17DB
HU3HE H26MB H263B H264B H265B H26NB H26DB
HU12 H35MB H353B H354B H355B H35NB H35DB
10 RELIABILITY COUPLED WITH INNOVATION
EXPLODED DIAGRAM
Delta Coupling
RELIABILITY COUPLED WITH INNOVATION 11
ITEM DESCRIPTION H09 H17 H26 H35
1 AutoHead KIT266 KIT266 KIT266 KIT2030
1a AutoHead with lock LOCKIT D5050 LOCKIT D5050 LOCKIT D5050 LOCKIT MK4
1b 30 Eye Kit1031 Kit1031 Kit1031 Kit2050
1c 40 Eye Kit1041 Kit1041 Kit1041 Kit2051
1d 50 Eye Kit1051 Kit1051 Kit1051 Kit2053
1e 40 Din Kit1042 Kit1042 Kit1043 Kit2052
1g 76 Nato Kit106 Kit106 Kit1061 Kit2055
2 Trigger & Spring Kit101 Kit101 Kit101 Kit1014
3 Barrel lock LOCKIT1-2 LOCKIT1-2 LOCKIT1-2 LOCKIT1-2
4 Bellows» Kit107 Kit107 Kit107 Kit2039*
5 Drawtube Kit3000 Kit3000 Kit3300 Kit2000
5a Drawtube Fixed Kit3003^ Kit3003^ Kit3302^ Kit2002^
6 Shock Absorbers»» Kit3001 Kit3001 Kit3001 Kit2001
7 Damper Kit3020 Kit3220 Kit260 Kit255
8 Rear Damper Bracket Mount & Bolt Kit3021 Kit3021 Kit3021 Kit2021
9 Pad & Handle Kit3354^̂ Kit3354^̂ Kit3354^̂ Kit3349
10 Brakelever B Type (incl. cable) Kit3338** Kit3338** Kit3338** Kit3338**
10a Brakelever S Type (incl. Cable) Kit3339*** Kit3339*** Kit3339*** Kit3339***
11 Breakaway Cable Kit130 Kit130 Kit130 Kit130
12 Brakelink 3230 3230 3230 3231
13 Spring Assembly Kit3260 Kit3260 Kit3259 Kit3259
14 Brakelever Mounting Plate Kit3262**** Kit3262**** Kit3262**** Kit3262****
Part Numbers & Exploded Diagram Explained
Prefix H = Hydratow
Capacity:
09 = 900kg
17 = 1700kg
26 = 2600kg
35 = 3500kg
Brake Lever Type:
B = Bent (usually on top of A Frame)
S = Straight (usually inside A Frame
channels)
Coupling Attachment:
M = 50mm head
3 = 30mm Eye
4 = 40mm Eye
5 = 50mm Eye
N = Nato Eye
D = 40mm DIN Eye
* Kit108 with internal mounting eyeshafts See Page 55 for AutoHead Spares
^ Post 01/99 ^^Pre 04/00 = Kit3350 Alphabetical suffix on ITEM column =
options
**Pre 12/1995 = Kit3335 » included in 1 -1g
*** Pre 12/1995 = Kit 3337 »» included in 5 & 5a
**** Pre 12/1995 = Kit3261
Typical Part No. = H26MB - Hydratow,
2600 weight, with 50mm Head, Bent brake lever
RELIABILITY COUPLED WITH INNOVATION 12
Hydratow
E H Coupling
Standards:
•2 year Warranty
•High Corrosion system
•Robust Cast Iron
•71/320/EC Approved
•94/20/EC Approved
•High Security Lock
•Lifetime tested to 2 Million
cycles
Features:
•Multiple fixing centres and “On, In,
Under” mounting options
•Plug storage hole
•Over centre Posilite™ handbrake for
easier operation
•Removable lock option
•Full range of head & eye combinations
•Provision for 48mm Jockey
•Built to meet European needs
•Greater Range of Capacity
The six models comprise the most comprehensive choice of couplings
available on the market with weight ranges designed to suit most
requirements
EH09 to EH27
and EH35
13 RELIABILITY COUPLED WITH INNOVATION
T E C H N I C A L I N F O R M A T I O N
Coupling Capacity Kg Nose Load Nett Weight Kg 71/320 94/20
EH09 450-900 100 21 CD97/001 e11*94/20*0368*00
EH14 700-1400 100 21 CD97/002 e11*94/20*0369*00
EH17 850-1700 100 21 CD97/003 e11*94/20*0370*00
EH20 1075-2000 100 21 CD97/004 e11*94/20*0371*00
EH27 1650-2750 100 21 CD97/005 e11*94/20*0372*00
EH35 2250-3500 120 28 CD97/006 e11*94/20*0373*00
Coupling 50mm Head 30mm Eye 40mm Eye 50mm Eye 76 NATO Eye40mm DIN
Eye
EH09 EH09MF EH093F EH094F EH095F EH09NF EH09DF
EH14 EH14MF EH143F EH144F EH145F EH14NF EH14DF
EH17 EH17MF EH173F EH174F EH175F EH17NF EH17DF
EH20 EH20MF EH203F EH204F EH205F EH20NF EH20DF
EH27 EH27MF EH273F EH274F EH275F EH27NF EH27DF
EH35 EH35MF EH353F EH354F EH355F EH35NF EH35DF
14 RELIABILITY COUPLED WITH INNOVATION
EXPLODED DIAGRAM
EH Coupling
RELIABILITY COUPLED WITH INNOVATION
2
3
10
13
14
9
8
7
6
5
11
1
12
15
5
ITEM DESCRIPTION EH09 EH14 EH17 EH20 EH27 EH35
1 AutoHead KIT266 KIT266 KIT266 KIT266 KIT266 KIT2030
1a AutoHead with lock LOCKIT D5050 LOCKIT D5050 LOCKIT D5050 LOCKIT D5050 LOCKIT D5050 LOCKIT MK4
1b 30 Eye Kit1031 Kit1031 Kit1031 Kit1031 Kit1031 Kit2050
1c 40 Eye Kit1041 Kit1041 Kit1041 Kit1041 Kit1041 Kit2051
1d 50 Eye Kit1051 Kit1051 Kit1051 Kit1051 Kit1051 Kit2053
1e 40 Din Kit1042 Kit1042 Kit1042 Kit1042 KIT1043 Kit2052
1f 40 Din & Item 5a Kit1047 Kit1047 Kit1047 Kit1047 KIT1046 Kit2057
1g 76 Nato Kit106 Kit106 Kit106 Kit106 KIT1061 Kit2055
1h 76 Nato & Item 5a Kit1062 Kit1062 Kit1062 Kit1062 KIT1063 Kit2056
2 Trigger & Spring** Kit101 Kit101 Kit101 Kit101 Kit101 Kit1014
3 Barrel lock LOCKIT1-2 LOCKIT1-2 LOCKIT1-2 LOCKIT1-2 LOCKIT1-2 LOCKIT1-2
4 Bellows Kit107 Kit107 Kit107 Kit107 Kit107 Kit2039
5 Drawtube Kit3401 Kit3401 Kit3401 Kit3401 Kit 3402 Kit3403
5a Drawtube Fixed Kit3401 Kit3401 Kit3401 Kit3401 Kit3412 Kit3413
6 Shock Absorbers Kit3001 Kit3001 Kit3001 Kit3001 Kit3001 Kit2001
7 Damper Kit3020 Kit243 Kit3220 Kit3407 Kit260 Kit255
8 Rear Damper Bolt Kit3405 Kit3405 Kit3405 Kit3405 Kit3405 Kit3406
9 Pad & Handle Kit3354 Kit3354 Kit3354 Kit3354 Kit3354 Kit3354
10 Brakelever B Type Kit3338* Kit3338* Kit3338* Kit3338* Kit3338* Kit3338*
10a Brakelever S Type Kit3339** Kit3339** Kit3339** Kit3339** Kit3339** Kit3339**
11 Cable Kit129 Kit129 Kit129 Kit129 Kit129 Kit129
12 Brakelink Kit3230 Kit3230 Kit3230 Kit3230 Kit3230 Kit3231
13 Spring Assembly Kit3260 Kit3260 Kit3260 Kit3260 Kit3259 Kit3259
14 Brakelever Mounting Plate Kit3262 Kit3262 Kit3262 Kit3262 Kit3262 Kit3262
Part Numbers & Exploded Diagram Explained
E = European
H = Hydratow
Capacity
09 = 450 - 900kg
14 = 700 - 1400kg
17 = 850 - 1700kg
20 = 1075 - 2000kg
27 = 1650 - 2750kg
35 = 2250 - 3500kg
Coupling Attachment
M = 50mm Head
3 = 30mm Eye
4 = 40mm Eye
5 = 50mm Eye
N = 76 Nato Eye
D = 40 Din Eye
AUTO = AutoHead
F = Flat brakelever
** See page 61 for AutoHead Kit
Typical Part No. EH20MF = European Hydratow, 2000kg capacity, with
head, Flat brakelever
Alphabetical suffix on ITEM column = options
16 RELIABILITY COUPLED WITH INNOVATION
Hydratow
Square Tube Couplings
S26M8
Standards:
•2 year Warranty
•High Corrosion Resistance
•Robust Cast Iron Bearings
•71/320/EC Approved
•94/20/EC Approved
•High Security Lock
•Lifetime tested to 2 Million cycles
Features:
•Built to meet UK operational needs
•Eyes/Head option
•Posilite™ Easy action brakelever
•Optional low profile AutoHead™
•Cast Bearings for durability
•Size of Tube Variable
What more do you need for your T Bar frame? It has the
strength, it has the looks, it has the Brand.
Suitable for square or
rectangular drawbar trailers
e.g. boat trailers, T-Chassis
etc.
17 RELIABILITY COUPLED WITH INNOVATION
T E C H N I C A L I N F O R M A T I O N Approved to: EC94/20; 71/320 Standards
Coupling
Capacity
Kg
Nose
Load
Nett
Weight EC94/20 71/320S09/60 450 - 900 100 10 00-0107 CD90/004 Ext 1
S09/70 450 - 900 100 10 00-0107 CD90/004 Ext 1
S14/60 700 - 1400 100 10 00-0107 CD90/001 Ext 2
S14/70 700 - 1400 100 18 00-0107 CD90/001 Ext 2
S18/60 900 - 1800 100 17 00-0107 CD93/013 Ext 1
S18/70 900 - 1800 100 10 00-0107 CD90/013 Ext 1
18
Coupling
50mm
Head
30mm
Eye
40mm
Eye
50mm
Eye
76 Nato
Eye
S09/60 S09M6 S0936 S0946 S0956 N/A
S09/70 S09M7 S0937 S0947 S0957 S09N7
S14/60 S14M6 S1436 S1446 S1456 N/A
S14/70 S14M7 S1437 S1447 S1457 S14N7
S18/60 S18M6 S1836 S1846 S1856 N/A
S18/70 S18M7 S1837 S1847 S1857 S18N7
RELIABILITY COUPLED WITH INNOVATION
Coupling
Capacity
Kg
Nose
Load
Nett
Weight EC94/20 71/320S14/80 700 - 1400 100 18 00-0108 CD94/002 Ext 1
S14/90 700 - 1400 100 18 00-0108 CD94/002 Ext 1
S20/80 1130 - 2000 100 15 00-0108 CD93/001 Ext 1
S20/90 1130 - 2000 100 20 00-0108 CD93/001 Ext 1
S26/80 1650 - 2600 100 20 00-0108 CD90/006 Ext 1
S26/90 1650 - 2600 100 20 00-0108 CD90/006 Ext 1
Coupling
50mm
Head
30mm
Eye
40mm
Eye
50mm
Eye
76 Nato
Eye
S14/80 S14M8 S1438 S1448 S1458 S14N8
S14/90 S14M9 S1439 S1449 S1459 S14N9
S20/80 S20M8 S2038 S2048 S2058 S20N8
S20/90 S20M9 S2039 S2049 S2059 S20N9
S26/80 S26M8 S2638 S2648 S2658 S26N8
S26/90 S26M9 S2639 S2649 S2659 S26N9
19 RELIABILITY COUPLED WITH INNOVATION
Coupling
Capacity
Kg
Nose
Load
Nett
Weight EC94/20 71/320S18/90 900 - 1800 100 20 00-0107 CD90/013 Ext 1
S18/100 900 - 1800 100 20 00-0107 CD90/013 Ext 1
S32/90 1600 - 3200 120 10 00-0109 CD90/007 Ext 1
S32/100 1600 - 3200 120 21.5 00-0109 CD90/007 Ext 1
Coupling
50mm
Head 30mm Eye
40mm
Eye
50mm
Eye
S18/90 S18M9 S1839 S1849 S1859
S18/100 S18M10 S18310 S18410 S18510
S32/90 S32M9 S3239 S3249 S3259
S32/100 S32M10 S32310 S32410 S32510
20 RELIABILITY COUPLED WITH INNOVATION
B48C
Square Tube Coupling
EXPLODED DIAGRAM
21 RELIABILITY COUPLED WITH INNOVATION
1
3
2
12
10
13
14
8
7
5
6
11
Part Numbers & Exploded Diagram Explained
Prefix S = Square Tube
Capacity:
09 = 900kg
14 = 1400kg
18 = 1800kg
20 = 2000kg
32 = 3200kg
Coupling Attachment:
M = 50mm head
3 = 30mm Eye
4 = 40mm Eye
5 = 50mm Eye
N = Nato Eye
D = 40mm DIN Eye
L = Less head or Eye
Brake Lever Type:
E = Energy Store (HU3S80 only)
6 = 60mm sq. tube
7 = 70mm sq. tube
8 = 80mm sq. tube
9 = 90mm sq. tube
10 = 100mm sq. tube
* Pre - please contact Sales on 01274 516760 ^ Kit 3024 to be used with cast bearing version
** Pre-1998 - Plastic bushes, please contact Sales
*** Pre 1995 - Kit 3337
Typical Part No. S18M9 = Square Tube, 1800kg capacity,
50mm Head, 90mm square Tube
Alphabetical suffix
on ITEM column = options
ITEM DESCRIPTION S09/ 60/70 S14/ 60/70 S14/ 80/90 S18/ 60/70 S18/ 90/100 S20/ 80/90 S26/ 80/90 S32/ 90/100
1 Head Lockit5050 Lockit5050 Lockit5050 Lockit5050 LockitMK4 Lockit5050 Lockit5050 LockitMK4
1a AutoHead Lockit5050AUT Lockit5050AUT Lockit5050AUT Lockit5050AUT LockitMk4AUT Lockit5050AUT Lockit5050AUT LockitMk4AUT
1b 30mm Eye Kit1031* Kit1031* Kit1031 Kit1031* Kit2050 Kit1031 Kit1031 Kit2050
1c 40mm Eye Kit1041* Kit1041* Kit1041 Kit1041* Kit2051 Kit1041 Kit1041 Kit2051
1d 50mm Eye Kit1051* Kit1051* Kit1051 Kit1051* Kit2053 Kit1051 Kit1051 Kit2053
1e 40Din Eye Kit1042* Kit1042* Kit1042 Kit1042* Kit2052 Kit1043 Kit1043 Kit2052
1g 76 Nato Kit106* Kit106* Kit106 Kit106* Kit2055 Kit1061 Kit1061 Kit2055
2 Trigger & Spring Kit101 Kit101 Kit101 Kit101 Kit1014 Kit101 Kit101 Kit1014
3 Barrel Lock Lockit1-2 Lockit1-2 Lockit1-2 Lockit1-2 Lockit1-2 Lockit1-2 Lockit1-2 Lockit1-2
4 Bellows Kit107 Kit107 Kit107 Kit107 Kit2039 Kit107 Kit107 Kit2039
5 Drawtube Kit3000* * Kit3000* * Kit3000 Kit3000* * Kit2000 Kit3300 Kit3300 Kit2000
5a Drawtube Fixed Kit3000* * Kit3000* * Kit3000* * Kit2002 10152 Kit3302 Kit2002
6 Shock Absorbers Kit3001 Kit3001 Kit3001 Kit3001 Kit2001 Kit3001 Kit3001 Kit2001
7 Damper Kit3020 Kit243 Kit243 Kit3220 Kit3220 Kit3407 Kit260 Kit259
8 Rear Damper Bolt Kit3024^ Kit3024^ Kit3024^ Kit3024^ Kit3025 Kit3024^ Kit3024^ Kit3025
9 Pad & Handle N/A N/A N/A N/A N/A N/A N/A N/A
10 Brakelever B Type N/A N/A N/A N/A N/A N/A N/A N/A
10a Brakelever S Type Kit3339* * * Kit3339* * * Kit3339* * * Kit3339* * * Kit3339* * * Kit3339* * * Kit3339* * * Kit3339* * *
11 Cable Kit130 Kit130 Kit130 Kit130 Kit130 Kit130 Kit130 Kit130
12 Brakelink Kit3233 Kit3233 Kit3233 Kit3233 Kit3230 Kit3233 Kit3233 Kit3230
13 Spring Assembly Kit3260 Kit3260 Kit3260 Kit3260 Kit3259 Kit3259 Kit3259 Kit3259
14 Brakelever Mouting Plate N/A N/A N/A N/A N/A N/A N/A N/A
22 RELIABILITY COUPLED WITH INNOVATION
Hydratow
Adjustable Height
Coupling
A26MA1C
There is also a non braked version available for use outside EC
compliant countries & Regions
Features:
•AutoHead Option
•Forged Knuckle with Teeth ensuring
locking at desired angle
•Forged integral stops preventing unit
being adjusted beyond its design
limits
•Available with 50mm Head or any
size of Eye in the Bradley Range
•Extra long locking handles
Standards:
•2 Year Warranty
•High Corrosion Resistance on
plated parts
•Robust Cast Iron
•71/320/EC Approved
•94/20/EC Approved
•High Security Lock
23 RELIABILITY COUPLED WITH INNOVATION
T E C H N I C A L I N F O R M A T I O N
24
Coupling Capacity Kg Nose Load Nett Weight EC94/20 71/320A17 1700 100 60 e1*94/20*0954 CD89/003
A26 2600 100 60 e1*94/20*0957 CD89/001
A35 3500 120 60 e1*94/20*0956 CD90/003
RELIABILITY COUPLED WITH INNOVATION
Adjustable Height
Coupling
EXPLODED DIAGRAM
25
RELIABILITY COUPLED WITH INNOVATION
15
Please Note
Damper may be other way round on some
Adjustable height couplings
1 Head LOCKITM K4 LOCKITM K4 LOCKITM K4
1 a AutoHead LOCKITM K4AUT LOCKITM K4AUT LOCKITM K4AUT
1 b 30 Eye Kit2050 Kit2050 Kit2050
1 c 40 Eye Kit2051 Kit2051 Kit2051
1 d 50 Eye Kit2053 Kit2053 Kit2053
1 e 40 Din Kit2052 Kit2052 Kit2052
1 g 76 Nato Kit2055 Kit2055 Kit2055
2 Trigger & Spring Kit1014 Kit1014 Kit1014
3 Barrel lock LOCKIT1-2 LOCKIT1-2 LOCKIT1-2
4 Bellows Kit2039 Kit2039 Kit2039
5 Drawtube Kit2000 Kit2000 Kit2000
5 a Drawtube Fixed Kit2003 Kit2003 Kit2003
6 Shock Absorbers Kit2001 Kit2001 Kit2001
7 Damper Kit3220 Kit259 Kit255
8 Rear Damper Bolt Kit3021 Kit3021 Kit3021
9 Pad & Handle N/A N/A N/A
1 0 Brakelever B Type N/A N/A N/A
1 0 a Brakelever S Type Kit3339^ Kit3339^ Kit3339^
1 1 Cable Kit130 Kit130 Kit130
1 2 Brakelink Kit3230 Kit3230 Kit3231
1 3 Spring Assembly Kit3260 Kit3259 Kit3259
1 4 B/lever M ounting Plate N/A N/A N/A
Prefix A = Adjustable
Capacity (Gross Weight)
17 = 1700kg
26 = 2600kg
35 = 3500kg
Coupling Attachment
M = With Head
3 = 30mm Eye
4 = 40mm Eye
5 = 50mm Eye
N = 76 Nato Eye
D = 40 Din Eye
Part Numbers & Exploded Diagram Explained
Typical Part No. A26MA1C = Adjustable Height, 2600kg capacity, with head, Bottom
knuckle, complete with link arm & Bolt Assembly
Alphabetical suffix on ITEM column = options
26
ITEM DESCRIPTION A17/A1 A26/A1 A26/A9 A35/A2
15 Handnut & Bolt Assembly Top Knuckle 4893 4893 4894 4893
16 Handnut & Bolt Assembly Bottom Knuckle 4893 4893 4894 4892
17 Link Arm* 4544 4544 C00150000301** 4334
18 Bottom Knuckle 4331 4331 C00340290205 C00340290211
* 500mm Option **400mm Option
For Both, Contact Sales on 01274 551232
^ Kit3337 Pre 12/95
Detail InnerDia.
OuterDia.
No. ofTeeth
Handnut& Bolt
T01016 48 75 37 20 Spares onlyA1 65 90 37 27A9 63 92 36 27A2 70 108 37 33 Spares only
RELIABILITY COUPLED WITH INNOVATION
Bellows to
fit … A17 A26 A35
Cast Head
Eye Kit2039 Kit2039 Kit2039
40 Din/76
Nato Eye Kit108 Kit108 Kit108
Bowden Cables
1700kg/260
0kg 3500kg
700mm Kit2391 Kit2381
1000mm Kit2390 Kit2380
1300mm Kit2392 Kit2382
Non Braked Coupling
D201CA
Rugged cast malleable Iron construction for reliability on industrial/agricultural trailers.
Also for long life on leisure applications (pressed steel couplings can become easily
damaged or worn in certain arduous applications).
27 RELIABILITY COUPLED WITH INNOVATION
NEW extended handle – easier to operate in confined spaces
Rugged cast malleable Iron construction for reliability on
industrial/agricultural trailers. Also ideal for long life on leisure
applications. Based on a Bradley design that has sold almost 1
million units
•Class leading security option – designed to take Bradley‟s standard high strength plug lock
(LOCKIT1-2)
•Bradley 50mm ball Long Reach Double-locking device
•Combined flat and round tube mounting
•Built in wear indicator
•Capacity up to 2,600 kg in non EU states; 750 kg duty under Directive EC 94/20
•Durability guaranteed – spare parts readily available (See table overleaf)
•Plated high Corrosion Resistance - Sylvatect™
•Robust Cast Iron
•Lifetime tested to 2 Million cycles
•94/20/EC Approved
FEATURES &
STANDARDS
T E C H N I C A L I N F O R M A T I O N
28
PART NUMBERS EXPLAINED
D201CA
D201 = Cast unbraked
coupling
CA = Plated
Approval No. e11*94/20 000100
ITEM DESCRIPTION KIT
1 Trigger & Spring Kit101
2 Barrell Lock Lockit1-2
2
1
RELIABILITY COUPLED WITH INNOVATION
Non Braked Eyes
29 RELIABILITY COUPLED WITH INNOVATION
HEAVY DUTY UNBRAKED TOWING EYES Swivelling Eye Units – units fitted with drop forged swivelling eye, hardened and tempered, mounted in a weldable housing. E200-SW40E
Fitted with 40mm Eye Capacity: 10 tonnes (under certain conditions – consult BRADLEY) E200-SW50E Fitted with 50mm Eye E200-76N Fitted with 76mm NATO Eye Capacity: 10 tonnes (under certain conditions – consult BRADLEY) E400-SW76N Fitted with 76mm NATO Eye. In square housing block with rubber/steel shock absorbers. Capacity: When used on trailers having front wheel steering and hinged drawbar:- GW = 30 tonnes When used on a close-coupled trailer:- GW = 20 tonnes: NW = ½ tonne (Max) Fixed Eye Forgings Consult Bradley for capacities of following units, which are dependent upon each particular application. E300-ST52-F 76mm NATO Eye Forging with square end in readily weldable material. Capacity: up to 26 tonnes (under certain conditions – consult BRADLEY) DIN-40E-FBU 40mm DIN Bushed Eye Forging with square end in readily weldable material. Capacity: up to 20 tonnes (under certain conditions – consult BRADLEY) E400-EN16-F 76mm NATO Eye Forging on 2 ½” dia. Shaft. Material EN16 for fixing onto front trailer mounting point.
30 RELIABILITY COUPLED WITH INNOVATION
Spring Damped
Overrun Couplings
Standards:
•2 Year Warranty
•Primed
•Rugged Cast Iron
•Lifetime tested to 2 Million cycles
Features:
•All units available up to 3 Tonnes with
50mm head
•Wide range of types and capacities
available from 1Tonne up to 5 Tonnes
•Wide range of eye sizes available
•Manual override fitted as standard to all
units to isolate brakes when reversing
•Conversion plate option from CU to
D/E box range
Extremely competitive priced units for sale outside of the EEC or for
fitment to trailers built within the EEC for export to Non-EU Countries.
31 RELIABILITY COUPLED WITH INNOVATION
T E C H N I C A L I N F O R M A T I O N
Maximum Capacity
of Unit (Kg)
Maximum Nose
Weight (Kg)
Type of Head
Fitted
D' & 'E'
Range
1,000 75 50mm Head D30ML2
1,500 75 50mm Ball D30M2
2,250 100 50mm Ball D40M2
3,000 100 50mm Ball D60M2
1,500 75 30mm Eye E3032
1,500 75 40mm Eye E3042
1,500 75 50mm Eye E3052
1,500 75 76mm Nato Eye E30N2
2,250 100 30mm Eye E4532
2,250 100 40mm Eye E4542
2,250 100 50mm Eye E4552
2,250 100 76mm Nato Eye E45N2
3,000 100 40mm Eye E6042
3,000 100 50mm Eye E6052
3,000 100 76mm Nato Eye E60N2
4,000 250 40mm Eye E8042
4,000 250 50mm Eye E8052
4,000 250 76mm Nato Eye E80N2
5,000 250 50mm Eye E10052
5,000 250 76mm Nato Eye E100N2
32
Model C D E F G H
D30/40 & E30/45 1/2" 140 54 200 245 89
D60/E60 1/2" 137 73 205 250 108
E80/E100 5/8" 156 83 230 275 120
Head/Eye A B A B A B
50mm Ball 175 50 190 50 - -
40mm Eye 116 50 122 50 140 50
76mm NATO 149 79 155 79 160 79
D30/40 & E30/45 D60/E60 E80/E100
RELIABILITY COUPLED WITH INNOVATION
EXPLODED DIAGRAM
Spring Damped
Overrun Couplings
33 RELIABILITY COUPLED WITH INNOVATION
2
2a
1
Prefix D rectangular
box type c/w head
E rectangular
box type c/w eye
Part Numbers & Exploded Diagram Explained
Capacity:
20 = 20cwt (D only) (1 tonne)
30 = 30cwt (1.5 tonne)
40 = 40cwt (D only) (2 tonne)
45 = 45cwt (E only) (2.25 tonne)
60 = 60cwt (3 tonne)
80 = 80cwt (E only) (4 tonne)
100 = 100cwt (E only) (5 tonne)
Coupling Attachment:
M = 50mm Head
3 = 30mm Eye
4 = 40mm Eye
5 = 50mm eye
N = Nato Eye
Typical Part No. D40M = Rectangular box type c/w head, 40cwt, 50mm Head
SPARES AVAILABLE FOR THIS PRODUCT RANGE
34
2 Fish Plate CU 40/50 -D40/50 8247
2a Fish Plate CU60 - D60 8248
RELIABILITY COUPLED WITH INNOVATION
Standards:
•2 Year Warranty
•High Corrosion
Resistance
•Rotalok™ Patented
anti-rotation system
•Static and Dynamic
load tested
Features:
•High Quality Steel
•Nose load up to 350kg
•Brackets made of
malleable Cast Iron
•J100, 150 and 350
models feature Rotalok™
preventing unwind during
travel
Rotalok™
Jockey Wheels
The Bradley Rotalok™ Jockey Range offers the ultimate in Engineering and
Design Excellence from a UK Market Leader, with over 50 years experience
J43B
35
J48HL J48XL
RELIABILITY COUPLED WITH INNOVATION
J43LE
T E C H N I C A L I N F O R M A T I O N
Jockey Net Weight
(without
Bracket)
Nose
Load
Outer
Tube
Bracket
Options
Wheel Type Wheel Options
J100 43 5.6 kg 100 kg Straight B43 Metal Wheel
Rubber Tyre
Rubber wide
wheel
J150 48 7.8 kg 150 kg Straight B48P
B48C
Metal Wheel
Rubber Tyre
Rubber wide
wheel
J350 48 8.6 kg 350 kg Serrated B48C Metal Wheel
Rubber Tyre
Jockey A B C D Wheel Wheel Options Bracket
Min Max Fixing Centre Bolts
J100 43 430 min 43 730 min 110 - 290 101 M12 x 2 175 x 45
Wide: 210x75, Pneumatic:
245x75 B43
J150 48 500 min 48 830 min 148 - 320 105 M10 x 2 175 x 45 B48P
J150 48 500 min 48 830 min 148 - 320 146 M16 x 2 175 x 45 B48C
J350 48 500 min 48 830 min 140 - 375 146 M16 x 2 210 x 75 B48C
E
J150
J350 J100
36 RELIABILITY COUPLED WITH INNOVATION
EXPLODED DIAGRAM Rotalok Jockey Wheel
37 RELIABILITY COUPLED WITH INNOVATION
4
2
Part Numbers & Exploded Diagram Explained
Prefix: J
Tube Diameter:
43 = 43mm
48 = 48mm
Detail:
L = Less bracket
B = With Bracket
W = Wide Wheel
H = Heavy
P = Pneumatic Tyre
X = Medium
S = Serrated
ITEM DESCRIPTION J43 J48X J48H
1 Jockey Knob Kit142 Kit142 Kit142
2 Pad & Handle Kit1610 Kit 158 Kit158
3 Standard Wheel Kit143 Kit143 Kit3625
3a Rubber Wide Wheel Kit145 Kit3625 Kit3625
3b Pneumatic Wheel Kit3620 Kit3620 N/A
3c Metal Rim Wide Wheel N/A N/A Kit3625
4 Bracket B43 B48C B48C
4a Bracket N/A B48P N/A
Typical Part No. J43B = Jockey, 43mm diameter, with bracket
38 RELIABILITY COUPLED WITH INNOVATION
Heavy Duty Jockey Wheels
J63B-Twin
Standards:
•2 Year Warranty
•High Corrosion Resistance
•Static load tested to 750kg
maximum
•“R” clip anti-rotation feature
Features:
•Serrated Tube as standard
•Folding handle for ease of storage
option
•Thrust bearing for ease of operation
•Foam filled tyres for J63-Twin
•Heavy duty Cast bracket with quick
release mechanism for jockey wheel
•4 Bolt fixing bracket on J750 only
This J63B-Twin
shows the optional
fold-away handle
39
J3LS J3BSC
RELIABILITY COUPLED WITH INNOVATION
T E C H N I C A L I N F O R M A T I O N
Jockey Net Weight
(without
Bracket)
Nose
Load
Outer
Tube
Bracket
Options
Wheel Type Wheel
Options
J3LS 8.6 kg 350 kg Serrated B48 Metal Wheel
Rubber Tyre
J750 63
J750
63T
200mm-17.3kg
300mm-26.3kg
750 kg
500 kg
Serrated
Serrated
B63
B63
Cast Wheel
Polyurethane
Tyre
Cast Wheel
Rubber Tyre
Jockey A B C D Wheel Wheel Options
Min Max Fixing Centre Bolts
J3LS 430 min 48 680 min 270 - 485 146 M16 x 2 200 x 50
J750 63 600 min 63 750 min 275 - 540 171 x 45 M12 x 4 200 x 45 300 x 50
J750 63T 600 min 63 750 min 370 - 615 171 x 45 M12 x 4 300 x 50 250 x 80
E
Standard J63B
40 RELIABILITY COUPLED WITH INNOVATION
EXPLODED DIAGRAM
Heavy Duty Jockey Wheel
RELIABILITY COUPLED WITH INNOVATION
3
1a
1b
1
2
4
41
Part Numbers & Exploded Diagram Explained
ITEM DESCRIPTION J3 J63 Twin
1 Jockey Knob Kit142 Kit142 Kit142
1a Handle Kit Kit164 Kit155 Kit167
1b Safety Clip Kit153 Kit153 Kit153
2 Pad/Eyebolt & Handle Kit158 Kit165 Kit165
3 Standard Wheel Kit3623 Kit3622 Kit3626
3b 12" Wheel N/A Kit3621 N/A
4 Bracket B48C B63 B63
Prefix: J
Tube Diameter:
48 = 48mm
3 = 48mm
63 = 63mm
Details:
L = Less bracket
B = With Bracket
T = 12” Wheel (J63 only)
C = Horizontal Castor
S = Serrated
Typical Part No. J63B = Jockey, 63mm
diameter, with bracket
42 RELIABILITY COUPLED WITH INNOVATION
Sliding
Prop Stands
34mm Dia.
460 to
1220mm Long 43mm Dia.
610 to 1220mm
Long
48mm Dia.
610mm to 1220mm
Long
Also in serrated at
610mm Long
Standard:
•2 year Warranty
•High Corrosion Resistance
Features:
•Heavy Duty Tube
•4mm Thick Prop Foot
•Available in Sylvatect or Painted
•Serrated Option (48mm only)
Mounted Vertically, maximum load capabilities are achieved.
43
•If 34mm, Vertical Load Rating is 75kg
•If 43mm, Vertical Load Rating is 100kg
•If 48mm non serrated, Vertical Load Rating is 150kg
RELIABILITY COUPLED WITH INNOVATION
Side Winding
prop
1000kg
2000kg
3000kg
Screwed Prop
(T27)
2000kg
Telescopic Prop
100Kg / 400kg
750kg
Telescopic
Prop Stands
Standard:
•2 year Warranty
•High Corrosion
Resistance
Features:
•Standard Zinc plate and
clear passivate
•Side or Top Winding
Alternatives
•Fully Threaded Version
•Anti-Rotation Device
•Rotatable Mounting
Bracket, Side Winding Only
•The T27 is hot dipped
galvanised
48mm Dia.
610mm to
915mm Long
Telescopic Props can
also be used for
alignment / levelling
and are fast to use
44 RELIABILITY COUPLED WITH INNOVATION
T E C H N I C A L I N F O R M A T I O N
45
Part No Description
See
Drg
No Bra
cket
Max Min Max Min Max Min
P34460PL Light Duty 460mm 100 422 35 - - 457 - 101 M12 34.5 B34
P34610PL Light Duty 610mm 1 100 575 35 - - 610 - 101 M12 34.5 B34
P34760PL Light Duty 760mm 1 100 727 35 - - 762 - 101 M12 34.5 B34
P34915PL Light Duty 915mm 1 100 880 35 - - 915 - 101 M12 34.5 B34
P341065PL Light Duty 1065mm 1 100 1032 35 - - 1067 - 101 M12 34.5 B34
P341220PL Light Duty 1220mm 1 100 1185 35 - - 1220 - 101 M12 34.5 B34
P43610PL Medium Duty 610mm 1 100 575 35 - - 610 - 101 M12 43 B43
P43760PL Medium Duty 760mm 1 100 727 35 - - 762 - 101 M12 43 B43
P43915PL Medium Duty 915mm 1 100 880 35 - - 915 - 101 M12 43 B43
P431065PL Medium Duty 1065mm 1 100 1032 35 - - 1067 - 101 M12 43 B43
P431220PL Medium Duty 1220mm 1 100 1185 35 - - 1220 - 101 M12 43 B43
P48610PL Heavy Duty 610mm 1 100 575 35 - - 610 - 146 M16 48.4 B48C
P48760PL Heavy Duty 760mm 1 100 727 35 - - 762 - 146 M16 48.4 B48C
P48915PL Heavy Duty 915mm 1 100 880 35 - - 915 - 146 M16 48.4 B48C
P481065PL Heavy Duty 1065mm 1 100 1032 35 - - 1067 - 146 M16 48.4 B48C
P481220PL Heavy Duty 1220mm 1 100 1185 35 - - 1220 - 146 M16 48.4 B48C
P48610PLDHeavy Duty 610mm
Swivel Foot4 150 575 35 390 115 1000 725 146 M16 48.4 B48C
P48915PLDHeavy Duty 915mm
Swivel Foot4 150 880 35 390 115 1305 1030 146 M16 48.4 B48C
T27Heavy Duty Agricultural
Style3 100 643 115 - - 870 - 100 M16 - -
J2BD2 Medium Duty Swivel Foot 5 150 365 35 300 110 980 790 101 M12 43 B43
J3BSD2Heavy Duty Swivel Foot -
Serrated Tube5 150 390 35 295 80 915 700 146 M16 48.4 B48C
J4BD2Very Heavy Duty Swivel
Foot - Serrated Tube5 150 505 20 400 110 1180 890 171 M12 63.5 B63
SWTP1000
Side Winding - Swivel
Bracket for Horizontal
Storage, 1000kg
2 150 380 - 350 10 935 555 - - - -
SWTP2000 2000 2 150 380 - 450 10 1350 580 - - 60 -
SWTP3000 3000 2 200² 380 - 450 10 1350 580 - - 60 -
Jack 1000 6 150 - 350 10 935 555 - - - -
Jack 3000 6 200² - - 375 10 905 530 - - - -
Telescopic Prop Stands
E F G
Screw Prop Stands
Dimensions (mm)
Sliding Prop Stands AB C D
RELIABILITY COUPLED WITH INNOVATION
T E C H N I C A L I N F O R M A T I O N
46
Dwg 2.
Dwg 3. Dwg 1.
Dwg 5.
Dwg 4.
RELIABILITY COUPLED WITH INNOVATION
Dwg 6
Dwg 7
EXPLODED DIAGRAM
Prop Stands
47 RELIABILITY COUPLED WITH INNOVATION
1
1a
3
2
4
4
Part Numbers & Exploded Diagram Explained
ITEM DESCRIPTION 34mmØ 43mmØ 48mmØ 63mmØ
1 Knob N/A Kit142 Kit142 Kit142
1a Jockey Handle N/A N/A Kit164 Kit155
2 Pad & Handle Kit1611 Kit1610 N/A N/A
3 Bracket B34 B43 B48 B63
4 R-Clip N/A N/A Kit153 Kit153
Details:
PL = Plated
PA = Painted
S = Serrated Tube
D = Dished Foot
Prefix:
P Prop
J Jack
Tube Diameter:
34 = 34mm
43 = 43mm
48 = 48mm
Length:
460 = 460mm
610 = 610mm
760 = 760mm
915 = 915mm
1065 = 1065mm
Typical Part No. P43610PL = Prop, 43mm diameter, 610mm
length, plated body
48 RELIABILITY COUPLED WITH INNOVATION
Self engaging / semi automatic disengaging, simple one handed operation
No loseable / stealable parts
Compact design for maximum ground clearance and minimum overhang
Minimum fixing point to towing point centre dimensions to minimise forces
applied to both towbar and towing vehicle
No chains or wires
Supplied with or without ball
EC94/20 Approved ( e11 005762)
Optional Anti-Theft Lock for added security when using towing eyes
Compatible with 30, 40 & 50mm British Standard Eyes
Conforms to Road Traffic Act 1281 (1998)
AUTOJAW
SEMI AUTOMATIC UNIVERSAL
COUPLING
FEATURES &
STANDARDS
AJ351L2
AJ352L2
49
D Value* S Value Bolt Size No. Bolts
23.41kN 350kg 5/8 UNF „S‟ Grade
or M16 8.8 Grade
Bolt Centres 90mm
2
S Value = Static Vertical Load
D Value = The D value is defined as the theoretical
reference force for the horizontal force between
towing vehicle and trailer.
ENGINEERED TO EXCELLENCE
AUTOJAW
TECHNICAL INFORMATION
QUALITY GUARANTEED
2 YEAR WARRANTY
78
.5 m
m
68 mm
Autojaw is designed to be used on vehicles with a max
gross vehicle weight of 32 tonnes. The high “D” value
of 23.41 permits the full maximum trailer mass of
3500kg even when AutoJaw is fitted to a 7.5 tonne
towing vehicle. This makes AutoJaw unique in that
this can be achieved with 2 bolt fixing.
A graph showing towing vehicle to trailer weight options
is available from sales.
50
E40TC
Standards:
•2 Year Warranty
•High Corrosion
Resistance
•Rugged Cast Iron
•Doublelock
Mechanism
•Lifetime tested to 2
Million cycles
Features:
•EC94/20 Approved
•Padlock Option
•No jamming
•Minimum overhang
•Compatible with British
standard eyes 30/40/50*
•Approved to British
Standard * Compatibility varies according to model
please consult Sales or Technical on +44
(1)274 560414
E40T
E100TC
E100T
Towing Jaws
51
Refer to “Hints and Tips”
before specifying
RELIABILITY COUPLED WITH INNOVATION
S Value - Static Vertical Load
D Value - The D Value is defined as the theoretical reference force for the
horizontal force between towing vehicle and trailer (see page 76 for D Value Graph)
JAWS D
VALUE
S
VALUE
A BOLT
SIZE
NO.
BOLTS
PIN
DIA.
E40TC 17kN 200kg 90mm M16 2 25mm
E40T 17kN 200kg 90mm M16 2 25mm
E100TC 30.95kN 350kg 86mm x
45mm
M12 4 32mm
E100T 30.95kN 350kg 86mm x
45mm
M12 4 32mm
2
T E C H N I C A L I N F O R M A T I O N
Approved to: EC94/20 Standard
52
S Value
D Value
RELIABILITY COUPLED WITH INNOVATION
QUALITY GUARANTEED
2 YEAR WARRANTY
EXPLODED DIAGRAM
E40TC
E100TC
53 RELIABILITY COUPLED WITH INNOVATION
2
1
2
1
Part Numbers & Exploded Diagram Explained
Prefix:
V = Jaw/Hook
Capacity:
35 = 3.5 ton with 3.5 ton
towing vehicle
50 = 3.5 ton with up to 32
ton towing vehicle
(please refer to D Value
Graph)
ITEM DESCRIPTION V351L V352L V353L V501L V502L
1 Locking Handle N/A Kit173 N/A N/A Kit173
2 Ball Pin & Wire Kit171 Kit172 N/A Kit169 Kit170
3 Bolt Pack V35B V35B V35B V50B V50B
Details:
1 = Pin Only
2 = Ball and Pin
3 = Spring Assisted Pin
L = Less Bolts
Typical Part No. V352L = Jaw, 3.5 ton capacity, ball and pin, less bolts
54 RELIABILITY COUPLED WITH INNOVATION
AutoHead™
D5050AUT
Standards:
•2 Year Warranty
•High Corrosion Resistance
•Rugged Cast Iron
•Doublelock Mechanism
•Lifetime tested to 2 Million cycles
•Security Lock facility
•94/20/EC approved
Features:
•Single handed Operation
•Low Profile
•Wear indicator
•Engagement indicator
The new AutoHead™ with its sleek profile and single
handed operation brings you to the next stage in towing.
Security conscious in every sense of the word with all
your standard Bradley attributes
55 RELIABILITY COUPLED WITH INNOVATION
•Lift handle whilst releasing trigger with thumb to prime
auto mechanism
•Insert towball - the trigger automatically locks the handle
in the closed position!
•50mm ball diameter
•LockitD5050 fits 48.4mm
diameter drawtube
•LockitMK IV fits 60mm
diameter drawtube
T E C H N I C A L I N F O R M A T I O N
Approved to: EC94/20 Standard
56 RELIABILITY COUPLED WITH INNOVATION
QUALITY GUARANTEED
2 YEAR WARRANTY
EXPLODED DIAGRAM
AutoHead
RELIABILITY COUPLED WITH INNOVATION
1
57
2
3
4
LOCKIT = Security Device (Head)
D = To fit up to 2.75 tonnes coupling
50 = Fitting a 50mm Head/ball
MK4 = To fit 3.5 tonnes Coupling
AUT = Automatic
Part Numbers & Exploded Diagram Explained
Typical Part No. LOCKITD50AUT = Security Head fitting up to 2.75 ton
coupling, fitting a 50mm ball Automatic version
58
ITEM DESCRIPTION Up to 2750kg Up to 3500kg
1 Barrel Lock Lockit1-2 Lockit1-2
2 Bolts & Nuts Kit1020 Kit1021
3 Trigger & Spring Kit1015 Kit1016
4 Complete Head LOCKITD50AUT LOCKITMK4AUT
RELIABILITY COUPLED WITH INNOVATION
Voyager Axles
Features:
•Fully tried and tested concept giving
smooth ride, low maintenance, long life
•Well matched complete package
•Range of capacities available from 800kg
to 1800kgs. (up to 3.5tonne available in twin
axle version)
•Easy fitment to trailer chassis using 4 bolt
fixing
•Available with non braked hubs
•Various wheel fixing options
•Fully optimised suspension design giving a
superb combination of ride and capacity
•Multi-positional brake cable brackets to
enable offsetting for twin axle application
•Unbraked axles over 750kg, gross weight
limited to 750kg in EEC where directive
71/320 EC applies
Please refer to Hints and Tips
The Brake Cable
balance bar and bracket
system reduces risk of
cable sag and binding
problems after extended
period in service
Standards:
•2 year Warranty
•Painted and plated body ensuring
Corrosion Resistance
•71/320 EC approved brakes
•Lifetime tested to 4.8million
cycles ensuring maintained
performance
•Above average design safety
factors
•Branded and proven bearing and
seal types
•Full material traceability
•Supplied fully assembled
59 RELIABILITY COUPLED WITH INNOVATION
T E C H N I C A L I N F O R M A T I O N
Dimensions „B‟, „J‟
and „C‟ are all to
customers‟
requirement within
design criteria/legal
limits
Bracket fitted as standard on
V18 - V19 version only 60
CAPACITY BRAKE HUB SIZE STUDDING D E MIN E MAX F G H J MIN J MAX DROP ARM
800 NB1T LIST 1 130 30 100 60 60/70 50 860 2000 127
800 NB2T LIST 2 154 30 100 60 60/70 50 860 2000 127
800 NB4T LIST 4 130 30 100 60 60/70 50 860 2000 127
800 203 X 40R LIST 2 154 30 100 60 60/70 50 860 2000 127
900 203 X 40R LIST 2 154 30 100 60 60/70 50 970 2000 127
1000 NB1T LIST 1 130 30 125 60 60/70 50 1060 2000 127
1000 NB2T LIST 2 154 30 125 60 60/70 50 1060 2000 127
1000 203 X 40R LIST 2 154 30 125 60 60/70 50 1060 2000 127
1100 203 X 40R LIST 2 154 30 125 60 60/70 50 1130 2000 127
1300 NB2T LIST 2 154 30 150 60 70 50 1070 2000 127
1300 203 X 40R LIST 2 154 30 150 60 70 50 1070 2000 127
1300 200 X 50R LIST 2 154 30 150 60 70 50 1070 2000 127
1500 NB2T LIST 2 154 30 175 60 70 50 1110 2000 127
1500 203 X 40R LIST 2 154 30 175 60 70 50 1110 2000 127
1500 200 X 50R LIST 2 154 30 175 60 70 50 1110 2000 127
1800 NB3T LIST 3 135 30 200 60 80 60 1170 2000 127
1800 250 X 40R LIST 3 135 30 200 60 80 60 1170 2000 127
1900 250 X 40R LIST 3 135 30 200 60 80 60 1170 2000 127
Standard Studding Patterns
List 1 4 x M10 x 4.00” PCD Stud & Nut
List 2 5 x M12 x 112 PCD Wheel Bolt
4 x M12 x 100 PCD Wheel Bolt
5 x M14 x 140 PCD Wheel Bolt
4 x M12 x 5.5” PCD Stud & Nut
5 x M16 x 6.5” PCD Stud & Nut
List 3 5 x M14 x 140 PCD Wheel Bolt
4 x M12 x 5.5” PCD Stud & Nut
5 x M16 x 6.5” PCD Stud & Nut
5 x M16 x 140 PCD Stud & Nut
List 4 4 x M12 x 100 PCD Stud & Nut
Other studding patterns available on application
All Dimensions are in mm
Please ensure that the resulting E & J dimensions fall within
the minimum and maximum values shown in the above table
Should the values required for E & J dimension fall outside
the values shown please consult our technical sales
department
1900kg can only be achieved with the 250x40R brake by
using tyres with a rolling radius between 305 & 320mm
RELIABILITY COUPLED WITH INNOVATION
EXPLODED DIAGRAM
Axles
61
RELIABILITY COUPLED WITH INNOVATION
Part Numbers & Exploded Diagram Explained
PLEASE SEE PAGES 71 & 72 FOR BRAKES AVAILABLE
Prefix
V = Voyager
Capacity
08 = 800kg
09 = 900kg
10 = 1000kg
11 = 1100kg
13 = 1300kg
15 = 1500kg
18 = 1800kg
19 = 1900kg
F = Fixed
S = Standard (Refer to sales)
B = Brake Drum (203) Up to 1300kg
C = Brake Drum (200) Up to 1500kg
D = Brake Drum (250) Up to 1800kg
N - Z = Studding Pattern (Refer to sales)
Typical Part No. V11FBX = Voyager axle, 1100kg Capacity, Fixed drum or hub
type, selected studding pattern
62
BRAKE CABLE LENGTH OPTIONS
DESCRIPTION
Part No.
for Spares
Supplied
with Axle
FOC
Cable - 730mm Long BC730D Kit 6107
Cable - 830 mm Long BC830D Kit6108
Cable - 930 mm Long BC930D Kit6109
Cable - 1030 mm Long BC1030D Kit6100
Cable - 1130 mm Long BC1130D Kit6110
Cable - 1230 mm Long BC1230D Kit6120
Cable - 1430 mm Long BC1430D Kit6140
Cable - 1530 mm Long BC1530D Kit6145
Cable - 1630 mm Long BC1630D Kit6150
Cable - 1730 mm Long BC1730D Kit6160
RELIABILITY COUPLED WITH INNOVATION
Voyager Plus T Chassis
A „T‟ Chassis reduces design time, plus stock and capital investment for
the trailer builder - who can then concentrate on the layout and
manufacture of the trailer body, which can then be simply bolted to the
complete „T‟Chassis
Please refer to hints and tips
Standards:
•2 year Warranty
•High Corrosion Resistance
•Lifetime tested by calculation
to ISO7641\1 (1983)
•71/320/EC Approved for
couplings and brakes
•94/20/EC Approved where
applicable
Features:
•Braked/Unbraked option
•Fixed or Adjustable towing height version
•Available for gross trailer capacities up to
3.2 Tonne (fixed height) and 3.5 Tonne
(Adjustable)
•Use either 50mm Ball Head or any Eye
from the Bradley Range
•AutoHead™ option
•Twin Axles available
•Supplied fully assembled
63 RELIABILITY COUPLED WITH INNOVATION
T E C H N I C A L I N F O R M A T I O N
Please contact our sales team for further information
and to discuss your requirements
64 RELIABILITY COUPLED WITH INNOVATION
EXPLODED DIAGRAM
T-Chassis
See Square Tube Coupling
65 RELIABILITY COUPLED WITH INNOVATION
See Brakes
Part Numbers & Exploded Diagram Explained
For Details see both Brakes (Page 72) and
Square Tube Couplings (Page 17)
66 RELIABILITY COUPLED WITH INNOVATION
EXPLODED DIAGRAM
Brakes Explained
67 RELIABILITY COUPLED WITH INNOVATION
1 4
3
4
2 5
6
Part Numbers & Exploded Diagram Explained
ITEM DESCRIPTION PART NO APPLICATION
1 Adjuster Assembly Kit6022 1 Axle
2 Expander Kit6021 1 Axle
3 Spring Kit Kit6020 1 Axle
4 Shoe Kit (Standard Brakes) Kit6018 1 Axle
Shoe Kit (Auto Rev Brakes) Kit6019 1 Axle
5 Eyelet B00130000301 1 Side
6 Half Shell B00125000401 1 Side
7 Bearings and Oil Seals Kit191 1 Axle
8 Hub Cap B43360174400 1 Side
FOR SPARE BRAKE DRUMS PLEASE QUOTE AXLE SERIAL NUMBER
Parts List for: 250 x 40 BRAKES
Parts List for: 203 x 40 BRAKES
Parts List for: 200 x 50 BRAKES
ITEM DESCRIPTION PART NO APPLICATION
1 Adjuster Assembly Kit6015 1 Axle
2 Expander Kit6021 1 Axle
3 Spring Kit Kit6014 1 Axle
4 Shoe Kit (Standard Brakes) Kit6012 1 Axle
Shoe Kit (Auto Rev Brakes) Kit6013 1 Axle
5 Eyelet B00130000301 1 Side
6 Half Shell B00125000401 1 Side
7 Bearings and Oil Seals Kit190 1 Axle
8 Hub Cap B41360174400 1 Side
FOR SPARE BRAKE DRUMS PLEASE QUOTE AXLE SERIAL NUMBER
ITEM DESCRIPTION PART NO APPLICATION
1 Adjuster Assembly Kit6015 1 Axle
2 Expander Kit6021 1 Axle
3 Spring Kit Kit6017 1 Axle
4 Shoe Kit (Auto Rev Brakes) Kit6016 1 Axle
5 Eyelet B00130000301 1 Side
6 Half Shell B00125000401 1 Side
7 Bearings and Oil Seals Kit190 1 Axle
8 Hub Cap B41360174400 1 Side
FOR SPARE BRAKE DRUMS PLEASE QUOTE AXLE SERIAL NUMBER
RELIABILITY COUPLED WITH INNOVATION 68
Spare Parts,
Security Devices
& Lights
Britax Lamps
69 RELIABILITY COUPLED WITH INNOVATION
70 RELIABILITY COUPLED WITH INNOVATION
BREAKAWAY CABLES
Description Part No./ Ref.
1.75 coil rings (refer to table 1) Kit129
1.25 coil rings (refer to table 2) Kit130
Table 1 - Kit 129 Table 2 - Kit 130
Unit Ref Unit Ref Unit Ref Unit Ref
HU3S80RH HU9L HU2A HU4M
HU3HE HU9H HU2B HU4MK
HU3HERS HU10 HU3S80L HU4MKR
HU6MK HU10RG HU3L HU5M
HU6MKR HU10RS HU3LRG HU5MK
HU6MKR GAS HU12 HU3LRS HU5MR
HU6MLR HU12RG HU3H HU5MKR
HU6M HU12RS HU3HRG HU5MLR
HU 6MR HU3HERG HU3S80H HU10 MEELER
HU3HRS ALL RTP UNITS
HU3S80RL
BRAKELEVERS
Description Part No. Description Part No.
HU3S80STD Kit3331 HU10, 12STD Kit3331
HU3S80RS Kit3334 HU12RS Kit3332
HU3LRS + HRS Kit3333 HU12RG Kit3333
HU3HERS Kit3332 HU12RTP-B Kit3335*
HU3, L, H +HERG Kit3333 HU14RTP Kit3335*
HU3 + 8RTP + B Kit3335* HU3STD Kit3331
HU3RTP-S Kit3337** HU12RTP-S Kit3337**
HU4, 5, 6M Kit3334 *Post 12/1995 Kit3338
HU4, 5, 6MK Kit3334 **Post 12/1995 Kit3339
HU4, 5, 6M + MK + MKR Kit3334
ENERGY STORES GAS STRUTS & PULLERS
Description Part No. Description Part No.
HU3HERS Kit3360 Gas Strut Kit3112
HU3S80 RH & RL Kit3560
SECURITY LAMP OPTIONS
Description Part No. Description Part No.
Coupling Head Lock LOCKIT1-2 Lamp Wing Y10000000406
Coupling Head Lock Pass LOCKIT PASS Lamp Number Plate Y10000000407
Spare Key SPARE KEY Lamp rear fog RL738 Y10000000403
Locking Head D4650 LOCKIT D4650 Lamp Rear Flasher RL7C Y10000000401
Locking Head MK4 LOCKIT MK4 Lamp Rear Flasher 739.00 Y10000000413
Locking AutoHead D5050 LOCKITD50AUT Lamp Rear Flasher 9002-51 Y10000000410
Locking AutoHead MK4 LOCKITMK4AUT Lamp Rear Flasher 9003-50 Y10000000412
Security Kit M12 Bolt CAPPIT M12 Lamp Rear Flasher 9089.00 Y10000000414
Security Kit M14 Bolt CAPPIT M14 Lamp - RL7CFL (903.00) L/Hand Y10000000405
Lamp - RL7CFL (903.01) R/Hand Y10000000400
Lamp-Wing-Rubber Y10000000406