catalogo tiologic implant

Product Catalogue 2011 / 2012Product Catalogue 2011 / 2012

tiologic© h en

Surgery

Customer number

t

Please enter your customer number here to help us process your order quickly and efficiently.

Preface

t

3

Dear Customer,

We are pleased to present to you the new tioLogic© implant system catalogue.

This catalogue is systematically designed to provide you easy access and to study all information relevant to your daily work. The section summaries provide you with a quick general outline.

Where applicable, you will find a full scale illustration of the relevant product for better recognition. To round things off, there is a table section containing complementary service information or technical data.

We will gladly provide advice and support at any time, be it with our innovative tioLogic© product concept, our comprehensive service, or with our competent team of specialists.

The name Dentaurum stands for superior quality, dental competence and reliability for more than 125 years. These qualities can be equally applied to Dentaurum Implants. To us, this tradition is both chance and duty in one. Then change is the only certainty according to the motto: better is good’s enemy.

We especially recommend our comprehensive, up-to-the-minute, multilingual information on our website at www.dentaurum.de or www.tiologic.de.

We look forward to your order which we will handle quickly with the usual dedication. We also look forward to any praise or criticism you may have, as this enables us to become better.

With best regards from Ispringen

Mark Stephen Pace Axel WinkelstroeterCEO Dentaurum Group CEO Dentaurum Group

The product catalogue with more additional informations is available on CD as well.

Dentaurum Group

4

Worldwide dental competencefor over 125 years

The Dentaurum Group From the root up to the crown This family run business has made a distinguished name for itself the world over with an unusually wide range of products and services.

Over more than 125 years, a unique product range from the root up to the crown has evolved. From innovative implants, high-quality casting alloys and dental porcelains, to brackets made of progressive materials. There is hardly another company in the dental sector with such an impressively wide and profound selection of products. With the subsidiary company Dentaurum Implants, they have worked intensely in implantology for the past 12 years. The latest result is the tioLogic© implant system, into which has flowed a maximum of internal and external experience from various areas of dental implantology.

Quality made by Dentaurum for Dentaurum Implants Trust is good, control is better For the Dentaurum Group in general, but especially for Dentaurum Implants, superior quality is the key to success of all involved. That is

why we are one of the first companies in this branch to be certified according to the medical device directive and the eco-audit. The Centre for Dental Communication CDC is the first training centre in Germany to be certified.

Most importantly: at Dentaurum, quality is not just something written in QM manuals. We live quality daily, leaving you to rely on our products and services with no ifs and buts.

Product and Service – both need to be right Successful long-term partnership and cooperation is only possible when more than “just” excellent products can be presented. That is why

you can call on us for comprehensive service and competent support. Informative support documentation such as product information, scientific papers, or patient information brochures enable you to share in

our expertise and that of our users.

5

CeramicsCeramicsHigh-fusing alloysCCSCARMEN®

ceraMotion Me

CeramicsTitanceraMotion Ti

CeramicsLow-fusing alloys dentCeram LFceraMotion Lf

CeramicsPressable ceramicsceraMotion PceraMotion PMeceraMotion PZr

CeramicsZrO2

Triceram®

ceraMotion Zr

Orthodontics

Orthodontic acrylicsOrthocryl®

Orthocryl® black & whiteExtensive range of accessoriesNovel designs

Temporary anchorage systemtomas®

tomas® auxiliaries

BracketsMetal | Ceramic | Plasticequilibrium® 2equilibrium® miniequilibrium® tidiscovery® sldiscovery®

discovery® pearlFascination® 2JewelsElegance®

Lingual systemmagic®

LinguSetLingual archesLingual instruments

Buccal tubesOrtho Ortho-Cast™ Ortho-Cast™ NFrematitan®

Bandsdentaform®

dentaform® Snap Standard

SuppliesImpression materialOrthalgenat® Duolaboratory accessoriesRapidur®

Expansion screwsCompression, traction and special screwsHyrax®

hyrax® clickTitan-Hyrax®

Variety

AdhesivesConTec DuoConTec LCConTec LCRGlasTecMix and No-MixSmartBond®

Intra-/ExtraoralExtraoral appliancesElastic ouxiliariesFace FormerOral screensOrthoSafeSUS2

Herbst® I – IV, TS

Wires | Arches | Wire attach-mentsTensic®

dentaflex®

rematitan® LITErematitan® SPECIALremanium®

Noninium®

remaloy®

Equire white arches

ProstheticsAlloysCast partial denture | Crowns and bridgesremanium® GM 380+remanium® GM 800+remanium® GM 900remanium® starremanium® 2000+remanium® securaremanium® 2001remanium® CSeremanium® LFC

Duplicating gels | Duplicating siliconesDublitop®

Dublitop® microDubliformDuplikatDubliplast®

DubliGelrema®-Silecosil

InvestmentsCast partial denture | Crowns and bridgesrema® dynamic Srema® Exakt F rema® ExaktCastorit® all speedCastorit®-super CTrivestrema® TTrema® CC

WaxesCrowns and bridgesPatternsPreformed wiresRodsSheetsConnecting waxesBlockout waxesStarWax – sculpting waxes

PreparationCast partial denture | Crowns and bridgesSeperating discsGrinding discsBurs and cuttersPolishing tools

Titanium rangeCasting metalsWires | BarsAttachmentsInvestmentsPreparation set

UnitsLaser welding technologyCasting machinesVacuum mixersPreheat furnacesWax knivesMilling unitsParallelometersSandblasters Duplicating unit

Precious metal rangeAlloysSolders | FluxesLaser welding rodsInvestments

ImplantologyImplantstioLogic©

TIOLOX®

Prosthetic componentsImpression materialModel fabricationAbutmentsAccessories

Surgical componentsInstrumentsOsteotomesTitanium meshAccessories

AugmentationNanoBone® TIOMESH®

6

Ortho-DesignPin head in bracket design for proven orthodontic techniques

GingiFit©

Polished, conical collar for perfect gingival adaptation without the risk of compression – ideal for preventing inflammation

Slot markingWith 4 slot markings for optimal detection of the slot position

New undercutUniquely simple, ligature-free fixation of the orthodontic appliance using LC adhesivePatent: DE 101 32 088

Depth stopMaximum safety by maintaining the planned insertion depth

7

3 LengthsAvailable in lengths of 6, 8 and 10 mm

Different threadsAvailable in self-drilling or self-tapping versions – sterile / non-sterile

tomas®-auxiliary kitAll essential attachments for TAD mechanics

pin

des

ign

ed b

y Pr

of.

Dr.

Bu

man

n

tomas®-uprighting spring tomas®-Nikodem springtomas®-cross tube tomas®-compression spring

tomas®-crimp hook tomas®-coil spring

”En-mass“ retraction Distalization Intrusion Uprighting

Contents

8

t NanoBone® bone augmentation material 60

t Implants 61

t Gingiva formers 62 – 63Conical 62Cylindrical 63

Prosthetics

t The S - M- L concept 66 – 67

t Series of abutments S 68 – 75Impression 70Model 70Temporary restorations 70CAD / CAM Scan abutment 70CAD / CAM Titanium base Zenotec 70Ceramics 71Precious metal 71Titanium 71Bars and bridges 72LOCATOR® 73Ball abutments 74Magnet 75

t Series of abutments M 76 – 83Impression 78Model 78Temporary restorations 78CAD / CAM Scan abutment 78CAD / CAM Titanium base Zenotec 78Ceramics 79Precious metal 79Titanium 79Bars and bridges 80LOCATOR® 81Ball abutments 82Magnet 83

t Series of abutments L 84 – 91Impression 86Model 86Temporary restorations 86CAD / CAM Scan abutment 86CAD / CAM Titanium base Zenotec 86Ceramics 87Precious metal 87Titanium 87Bars and bridges 88LOCATOR® 89Ball abutments 90Magnet 91

System concept

t The tioLogic© concept 12 – 17Easy handling 14 – 15Product identification 16 – 17

t Overview surgical components 18 – 27Implants ø 3.3 mm, series of abutments S 18 – 19Implants ø 3.7 mm, series of abutments M 20 – 21Implants ø 4.2 mm, series of abutments M 22 – 23Implants ø 4.8 mm, series of abutments L 24 – 25Implants ø 5.5 mm, series of abutments L 26 – 27

Surgery

t Planning and diagnosis 30 – 31X-ray templates 30Planning aids 31

t tioLogic© rotary instruments 32 – 36Overview 32 – 33Pre-Drills 34Surface cutters 34Depth drills 34Conical formers 35Conical formers (DB) 36Thread taps 36

t tioLogic© pOsition Planning and accessories 40 – 41

Basic sleeve 40Drill for basic sleeve 40Holder for basic sleeve 40Arrow pins for basic sleeves 41Inner sleeve 41Holder for inner sleeve 41Cleaning needle 41

t tioLogic© pOsition rotary instruments 42 – 44

Gingiva cutter 42Depth drills 42Stepped countersink 43Expander 44Thread tap 44

t Trays 46 – 59tioLogic© easyClean surgical tray 46 – 47tioLogic© surgical tray 48 – 49tioLogic© pOsition surgical tray 50 – 51tioLogic© instrument tray 52 – 53Osteotome Tray 54 – 56TIOSET® instrument tray 58 – 59

9

Accessories

t Surgical accessories 94 – 95

t Surgical and prosthetic accessories 96

t Prosthetic accessories 97

t Training implants 98

Service

t Comprehensive service 102 – 103

t Information materials 104 – 106Printed media 104 – 105Models 106

t Forms 107 – 109tioLogic© implant planning 107tioLogic© surgery protocol 108tioLogic© practice record card 109

t Treatment examples 110 – 117

Technical data

t Material data 120 – 121

t Quality system 122 – 123

Index

t Alphabetical 124 – 127

t Numerical 128 – 131

t Notes 132 – 133

System concept

t The tioLogic© concept 12 – 17Easy handling 14 – 15Product identification 16 – 17

t Overview surgical components 18 – 27Implants ø 3.3 mm, series of abutments S 18 – 19Implants ø 3.7 mm, series of abutments M 20 – 21Implants ø 4.2 mm, series of abutments M 22 – 23Implants ø 4.8 mm, series of abutments L 24 – 25Implants ø 5.5 mm, series of abutments L 26 – 27

10

11

System

co

ncep

tSystem concept

System concept

12

The tioLogic© conceptSafety – Aesthetics – Handling

The logical evolution Profit from the proven – use the new In the last years, implantology has become an established method of treatment in the dental office. Extensive research and development

on the one hand, and the comprehensive expertise of dentists and dental technicians on the other, mean implants are today fitted routinely, much to the benefit of the patient.

Dentaurum Implants looks back on over a decade of experience in implantology, the mother concern Dentaurum, on over 125 years experience in prosthetics. The development of tioLogic© implant systems is based on this solid foundation. During extensive dialogue with experts from clinics and dental offices, we combined proven ideas with innovative solutions while considering future demands.

Service An important building block within the concept It speaks for itself that tioLogic© hardware, the physically tangible parts of an implant system, must be convincing. This also applies to the

software, the accompanying support, and the advice from the provider. That is why Dentaurum Implants provide the attending dentist with informative and comprehensive documentation, a large selection of further education courses and high quality materials for the patient.

The factors of success for an implant system Safety – Aesthetics – Handling There are many single factors that, under long-term aspects, make implant treatment a success. Being the developer or manufacturer of

an implant system, we have no influence on patient-related factors such as oral hygiene. As far as influence in the areas implant design, system concept or affinity to an attending dentist are concerned, the focus is on three main needs that have emerged as the basic reasons for success: Safety, Aesthetics and Handling. Only when all three reasons are equally fulfilled, with demands on safety at the forefront, are the prospects of success at best.

That is why special attention was paid to excellent fulfilment of the specification in these three basic areas.

You will find details on safety, aesthetics, and handling in the tioLogic© SafetyPass.

Load transmission point

9.0 mm3.0 mm

30°

13

Maximum safety FEM optimized implant shape and thread geometry1

It is of fundamental importance for a modern implant system that its safety is convincingly proven and documented in both theory and practice through recognised methods. The tioLogic© implant’s outer geometry was developed in cooperation with Bonn University. Their comprehensive FEM analyses1 prove the above-average results for peak strain and distortion levels. The areas thread design, thread geometry, and implant form were examined separately.

Perfect aesthetics FEM optimized2 and ISO proven long-term durability3

An increase in demands and higher life expectancy has significantly raised the quality of modern dental restorations. Implant borne restorations are increasingly preferred to fixed / removable or tooth substance-challenging restorations. Also when considering improved aesthetics. In this respect, it is important that implants and superstructures provide aesthetically perfect and long-term solutions. The combination of cervical chamfer, crestal fine thread and CBS surface, which extends right to the cervical chamfer, promotes the apposition of bone tissue, prevents bone collapse and reduces gingival recession. The inner geometry was developed using FEM analysis2, its stability has been proven by long-term durability tests according to ISO3 at the Fraunhofer Institute.

Easy handling Precondition for efficiency of work Easy, safe and convenient handling of all parts is an important precondition for economical work with a modern implant system.

During conception of the tioLogic© implant system, we put into practice some fundamental handling aspects such as colour-coding for fast visualisation, laser markings, integrated depth stop, and simple-to-use packaging. The unique S - M - L system provides prosthetics with convincing practice and laboratory related customisation possibilities and clarity.

1 A. Rahimi, F. Heinemann, A. Jäger, C. Bourauel: Biomechanische Untersuchungen des Einflusses von Geometrievarianten des tioLogic© Implantats (Biomechanical tests on the effects of different types of tioLogic© implant geometry); Universität Bonn 2006

2 F. O. Kumala: Analyse des tioLogic© Implantats mittels FEM (Analysis of the tioLogic© implant using FEM); CADFEM Stuttgart 2006

3 R. Schäfer, R. Jaeger, D. Ulrich, U. Köster: Bestimmung der Ermüdungsfestigkeit eines Dental implantats (Determination of the fatigue strength of a dental implant); Fraunhofer Institut Werkstoffmechanik Freiburg 2006

DIN EN ISO 14801: 2003, Ermüdungsprüfung für enossale dentale Implantate (Fatigue test for endosseous dental implants), DIN – Deutsches Institut für Normung, Berlin

For detailed information on these studies, please refer to the tioLogic© SafetyPass.

Conclusion A convincing concept – State of the art

System concept

14

Easy handlingThe S - M - L concept

3 series of abutments for 5 implant diameters

S M L

S M L

M LM LS

ø 3.7 ø 4.2 ø 4.8 ø 5.5ø 3.3

ø 3.7 mm ø 4.2 mm

ø 4.8 mm ø 5.5 mm

ø 3.3 mm SML

5 implant diameters – 5 implant lengths – 3 series of abutments Integrated platform focussing – impressive flexibility The S - M - L concept includes aspects such as integrated platform focussing and offers new options for an individual, easy, cost-effective

technique with high reliability. The user has a choice of 5 implant diameters, 5 implant lengths and 3 prosthetic series of abutments.

Implant diameters Series of abutments

The optimal grading of implant diameters and lengths ensures that the appropriate implant is used for the indication. Components of the 3 series of abutments are made of plastic (temporaries), zirconia, titanium and precious metal and include bars, ball abutment, LOCATOR® and magnets. The construction components S are used for the implant diameter 3.3 mm, the construction components M for the implant diameters 3.7 mm and 4.2 mm and the construction components L for the implant diameters 4.8 mm and 5.5 mm. For exact identification all components are marked with S, M or L by laser.

15

All abutments and implants on a scale of 1:1

ø 3.3 ø 3.7 ø 4.2 ø 4.8 ø 5.5

9.0 mm

11.0 mm

13.0 mm

15.0 mm

17.0 mm

3 series of abutments

S M L

Imp

lan

ts

Prosthetic screw

System concept

16

All basic information needed by users and their assistants is on the label. These so-called sandwich labels allow fast and distinct documentation in the Patient ID card. The pictograms are intuitive and conform to international standards, thus providing rapid and clear flow of information. Further labels for the surgical protocol and patient ID card are also included.

988-980-12

Implantat, rot (M)implant, red (M)Ø 4.2 mm, L 15.0 mmREF 383-042-151 Stück/piece

2011-05

REF

38

3-0

42

-15

REF

38

3-0

42

-15

43

78

3

43

78

3

1

234

5

6

7 8 9 10

Product identificationAll information at a glance

1 Contents

2 Diameter and length

3 Article number (REF)

4 Packing unit

5 Symbol for sterilisation by gamma radiation

6 Number of the notified body according to the Medical Device Directive 93 / 42 EWG

7 Observe instructions

8 Single-use only

9 Sterility expiry date

10 Self-adhesive labels with item number (REF) and lot number (LOT)

17

1

2

3

• brown

ø 3.3 mm• yellow

ø 3.7 mm• red

ø 4.2 mm• blue

ø 4.8 mm• green

ø 5.5 mm

2 2 2 2 2

1 1 1 1 1

3 33

Fast and precise visualisation The tioLogic© implant system labelling concept is remarkably simple and intuitive for maximum user security. Hard-wearing colour coding

and legible laser marking make this possible.

Colour-coded instruments All diameter-oriented surgical instruments have coloured rings around the grip for precise diameter coding (not single patient instruments).

The colour coding is identical with that found on the implants.

Colour-coded implants The acrylic grip of the implant is colour-coded to show the diameter.

Laser marked S - M - L components All components, ranging from closure screw, gingiva former to the impression and the prosthetic components, include the S - M - L laser

marking to allow allocation to the respective implant platform.

SSystem overview

18

Overview surgical componentsImplants S ø 3.3 mm, series of abutments S

Implant

Imp

lan

t ø

3.3

mm

, S

ImplantLength 11.0 mm, REF 383-033-11Length 13.0 mm, REF 383-033-13Length 15.0 mm, REF 383-033-15Length 17.0 mm, REF 383-033-17

Planning

X-r

ay r

efer

ence

sph

ere

X-ray reference sphereø 5.0 mm, REF 330-560-00

Gu

ide

slee

ves

Guide sleevesLength 6.0 mm, REF 381-422-00Length 10.0 mm, REF 381-420-00

Rotary instruments,reusable

Pre-

Dri

llsPre-Drills guide sleeveLength17.0 mm, REF 381-426-00Length 21.0 mm, REF 381-424-00

Pilot drill Length 17.0 mm, REF 382-014-17

Mar

king

dril

l

Marking drillø 1.5 mm, REF 382-015-00

Surf

ace

cutt

er

Surface cutterø 3.3 mm, REF 382-033-00

Dep

th d

rills Depth drills

Length 11.0 mm, REF 382-020-11Length 13.0 mm, REF 382-020-13Length 15.0 mm, REF 382-020-15Length 17.0 mm, REF 382-020-17

Co

nic

al f

orm

ers

Conical formers, ø 3.3 mmLength 11.0 mm, REF 382-033-11Length 13.0 mm, REF 382-033-13Length 15.0 mm, REF 382-033-15Length 17.0 mm, REF 382-033-17

Thre

ad t

ap

Thread tapø 3.3 mm, REF 382-433-00

S19

Gingival forming, S Temporary restoration, S Impression, S

con

ical

, S

Gingiva formers, conical, SGH 1.5 mm, REF 384-110-00GH 3.0 mm, REF 384-112-00GH 4.5 mm, REF 384-114-00GH 6.0 mm, REF 384-116-00

cylin

dri

cal,

S Gingiva formers, cylindrical, SGH 1.5 mm, REF 384-120-00GH 3.0 mm, REF 384-122-00GH 4.5 mm, REF 384-124-00GH 6.0 mm, REF 384-126-00

Tem

po

rary

ab

utm

ent,

S

Temporary abutment, SGH 3.0 mm, REF 384-130-00

op

enOpen impression, SLength 10.0 mm, REF 385-110-00Length 14.0 mm, REF 385-112-00

clo

sed

Closed impression, SLength 7.0 mm, REF 385-120-00

MSystem overview

20

Overview surgical componentsImplants M ø 3.7 mm, series of abutments M

Implant

Imp

lan

t ø

3.7

mm

, M ImplantLength 9.0 mm, REF 383-037-09Length 11.0 mm, REF 383-037-11Length 13.0 mm, REF 383-037-13Length 15.0 mm, REF 383-037-15Length 17.0 mm, REF 383-037-17

Planning

X-r

ay r

efer

ence

sph

ere


Gu

ide

slee

ves



Pre-

Dri

llsPre-Drills guide sleeveLength 17.0 mm, REF 381-426-00Length 21.0 mm, REF 381-424-00


Mar

king

dril

l


Surf

ace

cutt

er


Dep

th d

rills

Depth drillsLength 9.0 mm, REF 382-020-09Length 11.0 mm, REF 382-020-11Length 13.0 mm, REF 382-020-13Length 15.0 mm, REF 382-020-15Length 17.0 mm, REF 382-020-17

Co

nic

al f

orm

ers Conical formers, ø 3.7 mm

Length 9.0 mm, REF 382-037-09Length 11.0 mm, REF 382-037-11Length 13.0 mm, REF 382-037-13Length 15.0 mm, REF 382-037-15Length 17.0 mm, REF 382-037-17

Thre

ad t

ap


M21

Gingival forming, M Temporary restoration, M Impression, M

con

ical

, M

Gingiva formers, conical, MGH 1.5 mm, REF 384-210-00GH 3.0 mm, REF 384-212-00GH 4.5 mm, REF 384-214-00GH 6.0 mm, REF 384-216-00

cylin

dri

cal,

M Gingiva formers, cylindrical, MGH 1.5 mm, REF 384-220-00GH 3.0 mm, REF 384-222-00GH 4.5 mm, REF 384-224-00GH 6.0 mm, REF 384-226-00

Tem

po

rary

ab

utm

ent,

M

Temporary abutment, MGH 3.0 mm, REF 384-230-00

op

enOpen Impression, MLength 10.0 mm, REF 385-210-00Length 14.0 mm, REF 385-212-00

clo

sed

Closed impression, MLength 7.0 mm, REF 385-220-00

MSystem overview

22

Overview surgical componentsImplants M ø 4.2 mm, series of abutments M

Implant

Imp

lan

t ø

4.2

mm

, M ImplantLength 9.0 mm, REF 383-042-09Length 11.0 mm, REF 383-042-11Length 13.0 mm, REF 383-042-13Length 15.0 mm, REF 383-042-15Length 17.0 mm, REF 383-042-17

Planning

X-r

ay r

efer

ence

sph

ere


Gu

ide

slee

ves



Pre-

Dri



Mar

king

dril

l


Surf

ace

cutt

er


Dep

th d

rills


Co

nic

al f

orm

ers Conical formers, ø 4.2 mm

Length 9.0 mm, REF 382-042-09Length 11.0 mm, REF 382-042-11Length 13.0 mm, REF 382-042-13Length 15.0 mm, REF 382-042-15Length 17.0 mm, REF 382-042-17

Thre

ad t

ap


M23

Gingival forming, M Temporary restoration, M Impression, M

con

ical

, M

Gingiva formers, conical, MGH 1.5 mm, REF 384-210-00GH 3.0 mm, REF 384-212-00GH 4.5 mm, REF 384-214-00GH 6.0 mm, REF 384-216-00

cylin

dri

cal,

M Gingiva formers, cylindrical, MGH 1.5 mm, REF 384-220-00GH 3.0 mm, REF 384-222-00GH 4.5 mm, REF 384-224-00GH 6.0 mm, REF 384-226-00

Tem

po

rary

ab

utm

ent,

M

Temporary abutment, MGH 3.0 mm, REF 384-230-00

op

enOpen impression, MLength 10.0 mm, REF 385-210-00Length 14.0 mm, REF 385-212-00

clo

sed

Closed impression, MLength 7.0 mm, REF 385-220-00

LSystem overview

24

Overview surgical componentsImplants L ø 4.8 mm, series of abutments L

Implant

Imp

lan

t ø

4.8

mm

, L ImplantLength 9.0 mm, REF 383-048-09Length 11.0 mm, REF 383-048-11Length 13.0 mm, REF 383-048-13Length 15.0 mm, REF 383-048-15Length 17.0 mm, REF 383-048-17

Planning

X-r

ay r

efer

ence

sp

her

e


Gu

ide

slee

ves



Pre-

Dri



Mar

king

dril

l


Surf

ace

cutt

er


Dep

th d

rills


Co

nic

al f

orm

ers

Conical formers, ø 4.8 mmLength 9.0 mm, REF 382-048-09Length 11.0 mm, REF 382-048-11Length 13.0 mm, REF 382-048-13Length 15.0 mm, REF 382-048-15Length 17.0 mm, REF 382-048-17

Thre

ad t

ap


L25

Gingival forming, L Temporary restoration, L Impression, L

con

ical

, L

Gingiva formers, conical, LGH 1.5 mm, REF 384-310-00GH 3.0 mm, REF 384-312-00GH 4.5 mm, REF 384-314-00GH 6.0 mm, REF 384-316-00

cylin

dri

cal,

L Gingiva formers, cylindrical, LGH 1.5 mm, REF 384-320-00GH 3.0 mm, REF 384-322-00GH 4.5 mm, REF 384-324-00GH 6.0 mm, REF 384-326-00

Tem

po

rary

ab

utm

ent,

L

Temporary abutment, LGH 3.0 mm, REF 384-330-00

off

ene Open impression, LLength 10.0 mm, REF 385-310-00Length 10.0 mm, REF 385-312-00

clo

sed

Closed impression, LLength 7.0 mm, REF 385-320-00

LSystem overview

26

Overview surgical componentsImplants L ø 5.5 mm, series of abutments L

Implant

Imp

lan

t ø

5.5

mm

, L

ImplantLength 9.0 mm, REF 383-055-09Length 11.0 mm, REF 383-055-11Length 13.0 mm, REF 383-055-13Length 15.0 mm, REF 383-055-15

Planning

X-r

ay r

efer

ence

sp

her

e


Gu

ide

slee

ves



Pre-

Dri



Mar

king

dril

l


Surf

ace

cutt

er


Dep

th d

rills Depth drills

Length 9.0 mm, REF 382-020-09Length 11.0 mm, REF 382-020-11Length 13.0 mm, REF 382-020-13Length 15.0 mm, REF 382-020-15

Co

nic

al f

orm

ers

Conical formers, ø 5.5 mmLength 9.0 mm, REF 382-055-09Length 11.0 mm, REF 382-055-11Length 13.0 mm, REF 382-055-13Length 15.0 mm, REF 382-055-15

Thre

ad t

ap


L27

Gingival forming, L Temporary restoration, L Impression, L

con

ical

, L

Gingiva formers, conical, LGH 1.5 mm, REF 384-310-00GH 3.0 mm, REF 384-312-00GH 4.5 mm, REF 384-314-00GH 6.0 mm, REF 384-316-00

cylin

dri

cal,

L Gingiva formers, cylindrical, LGH 1.5 mm, REF 384-320-00GH 3.0 mm, REF 384-322-00GH 4.5 mm, REF 384-324-00GH 6.0 mm, REF 384-326-00

Tem

po

rary

ab

utm

ent,

L

Temporary abutment, LGH 3.0 mm, REF 384-330-00

op

enOpen impression, LLength 10.0 mm, REF 385-310-00Length 14.0 mm, REF 385-312-00

clo

sed

Closed impression, LLength 7.0 mm, REF 385-320-00

28

Surgery

t Planning and diagnosis 30 – 31X-ray templates 30Planning aids 31

t tioLogic© rotary instruments 32 – 36Overview 32 – 33Pre-Drills 34Surface cutters 34Depth drills 34Conical formers 35Conical formers (DB) 36Thread taps 36

t tioLogic© pOsition Planning and accessories 40 – 41

Basic sleeve 40Drill for basic sleeve 40Holder for basic sleeve 40Arrow pins for basic sleeves 41Inner sleeve 41Holder for inner sleeve 41Cleaning needle 41

t tioLogic© pOsition rotary instruments 42 – 44

Gingiva cutter 42Depth drills 42Stepped countersink 43Expander 44Thread tap 44

t Trays 46 – 59tioLogic© easyClean surgical tray 46 – 47tioLogic© surgical tray 48 – 49tioLogic© pOsition surgical tray 50 – 51tioLogic© instrument tray 52 – 53Osteotome Tray 54 – 56TIOSET® instrument tray 58 – 59

t NanoBone® bone augmentation material 60

t Implants 61

t Gingiva formers 62 – 63Conical 62Cylindrical 63

Su

rg

ery

Surgery

29

Planning and diagnosis

t X-ray templates

REF 381-410-00 Planning foil Scale 1:1 / 1.25:1

REF 381-412-00 Planning foil Scale 1:1 / 1.4:1

Surgery

30

1 : 1S M L

ø 3,3 mm ø 3,7 mm ø 4,2 mm ø 4,8 mm ø 5,5 mm

L 9 mm

L 11 mm

L 13 mm

L 15 mm

L 17 mm

1,25 : 1S M L


L 9 mm

L 11 mm

L 13 mm

L 15 mm

L 17 mm

t Planungsfolie für tioLogic© Implantate

t Planning foil for tioLogic© Implants

t Transparent pour planification pour tioLogic© Implants

t Lámina de planificación para implantes tioLogic©

t Foglio per la pianificazione per implanti tioLogic©

Turnstraße 31 · 75228 Ispringen · Germany · Telefon + 49 72 31 / 803 - 0 · Fax + 49 72 31 / 803 - 295www.dentaurum-implants.de · E-Mail: [email protected]

381-

410-

00

09/0

7

381-410-00_381-412-00_Rontgenschablonen_SW_0907.indd 1 20.09.2007 13:24:20 Uhr

Turnstraße 31 · 75228 Ispringen · Germany · Telefon + 49 72 31 / 803 - 0 · Fax + 49 72 31 / 803 - 295www.dentaurum-implants.de · E-Mail: [email protected]

1 : 1S M L


L 9 mm

L 11 mm

L 13 mm

L 15 mm

L 17 mm

1,4 : 1S M L


L 9 mm

L 11 mm

L 13 mm

L 15 mm

L 17 mm

381-

412-

00

09/0

7

t Planungsfolie für tioLogic© Implantate

t Planning foil for tioLogic© Implants

t Transparent pour planification pour tioLogic© Implants

t Lámina de planificación para implantes tioLogic©

t Foglio per la pianificazione per implanti tioLogic©

381-410-00_381-412-00_Rontgenschablonen_SW_0907.indd 2 20.09.2007 13:24:25 Uhr

Surgery

Planning and diagnosis

t Planning aids

REF 330-560-00X-ray reference sphere 5 pieces

ø 5.0 mm

REF 381-420-00 Titanium guide sleeveø inner 2.0 mm L 10.0 mm

REF 381-422-00 Titanium guide sleeveø inner 2.0 mm L 6.0 mm

REF 381-424-00Pre-Drill for guide sleeve L 10.0 mm, resterilizable

ø 2.0 mm L 21.0 mm

REF 381-426-00Pre-Drill for guide sleeve L 6.0 mm, resterilizable

ø 2.0 mm L 17.0 mm

REF 381-428-00Drill for guide sleeve tungsten carbide (laboratory)

ø shank 2.35 mm

31All illustrations on a scale of 1:1 · Subject to alteration

Surgery

32

tioLogic© rotary instrumentsOverview

Marking drill

Surface cutters

Depth drills

Conical formers

Thread taps

33

Marking drill

Surface cutter

Depth drill

Conical former ø 3.3



Thread tap

Rotary instruments

t Pre-Drills, resterilizable

REF 382-015-00 Marking drill ø 1.5 mm

REF 382-014-17 Pilot drill1, 2 ø 1.4 mm L 17.0 mm

t Surface cutters, resterilizable

REF 382-033-00 Surface cutter S ø 3.3 mm

REF 382-037-00 Surface cutter M ø 3.7 mm

REF 382-042-00 Surface cutter M ø 4.2 mm

REF 382-048-00 Surface cutter L ø 4.8 mm

REF 382-055-00 Surface cutter L ø 5.5 mm

t Depth drills, resterilizable1

REF 382-020-09 Depth drill ø 2.0 mm L 9.0 mm





Surgery


1 For technical reasons the instruments are 1.0 mm longer than the given preparation length. 2 No integral depth stop for insertion lengths 9.0 / 11.0 / 13.0 / 15.0 mm.

Surgery

Rotary instruments

t Conical formers, resterilizable1

REF 382-033-11 Conical former S ø 3.3 mm L 11.0 mm




REF 382-037-09 Conical former M ø 3.7 mm L 9.0 mm










REF 382-048-09 Conical former L ø 4.8 mm L 9.0 mm










Surgery


Rotary instruments

t Conical formers (dense bone), resterilizable2

REF 382-233-17 Conical former S (DB) ø 3.3 mm L 17.0 mm

REF 382-237-17 Conical former M (DB) ø 3.7 mm L 17.0 mm

REF 382-242-17 Conical former M (DB) ø 4.2 mm L 17.0 mm

REF 382-248-17 Conical former L (DB) ø 4.8 mm L 17.0 mm

REF 382-255-17 Conical former L (DB) ø 5.5 mm L 17.0 mm

t Thread taps, resterilizable4

REF 382-433-00 Thread tap S ø 3.3 mm

REF 382-437-00 Thread tap M ø 3.7 mm

REF 382-442-00 Thread tap M ø 4.2 mm

REF 382-448-00 Thread tap L ø 4.8 mm

REF 382-455-00 Thread tap L ø 5.5 mm

1 For technical reasons the instruments are 1.0 mm longer than the given preparation length. 2 No integral depth stop for insertion lengths 9.0 / 11.0 / 13.0 / 15.0 mm. 3 SP: single patient 4 No integral depth stop

Surgery

37

Depth scale

17.0 mm

15.0 mm

13.0 mm

11.0 mm

9.0 mm

t Pilot drill (ø 1.4 mm)1,2

t Conical former (dense bone)2

t Thread tap

38

planned reliable implant placementtioLogic© pOsition – template-guided implant placement

Surgery

39

Na

vig

atio

n

Surgery

40

tioLogic© pOsition – Planning and accessories

t Basic sleeves

REF 381-533-00 Basic sleeve S ø 3.3 mm

REF 381-537-00 Basic sleeve M ø 3.7 mm

REF 381-542-00 Basic sleeve M ø 4.2 mm

REF 381-548-00 Basic sleeve L ø 4.8 mm

REF 381-555-00 Basic sleeve L ø 5.5 mm

t Drill for basic sleeve

REF 381-133-00 Drill for basic sleeve S ø 3.3 mm

REF 381-137-00 Drill for basic sleeve M ø 3.7 mm

REF 381-142-00 Drill for basic sleeve M ø 4.2 mm

REF 381-148-00 Drill for basic sleeve L ø 4.8 mm

REF 381-155-00 Drill for basic sleeve L ø 5.5 mm

t Holder for basic sleeve – med3D

REF 381-233-00 Holder for basic sleeve S ø 3.3 mm

REF 381-237-00 Holder for basic sleeve M ø 3.7 mm

REF 381-242-00 Holder for basic sleeve M ø 4.2 mm

REF 381-248-00 Holder for basic sleeve L ø 4.8 mm

REF 381-255-00 Holder for basic sleeve L ø 5.5 mm

Surgery

41

tioLogic© pOsition – Planning and accessories

t Arrow pins for basic sleeve – med3D

REF 381-733-00Arrow pin for basic sleeve S

ø 3.3 mm

REF 381-737-00Arrow pin for basic sleeve M

ø 3.7 mm

REF 381-742-00Arrow pin for basic sleeve M

ø 4.2 mm

REF 381-748-00Arrow pin for basic sleeve L

ø 4.8 mm

REF 381-755-00Arrow pin for basic sleeve L

ø 5.5 mm

t Inner sleeves

REF 381-333-00 Set inner sleeve S ø 3.3 mm

REF 381-337-00 Set inner sleeve M ø 3.7 mm

REF 381-342-00 Set inner sleeve M ø 4.2 mm

REF 381-348-00 Set inner sleeve L ø 4.8 mm

REF 381-355-00 Set inner sleeve L ø 5.5 mm

t Holder for inner sleeve

REF 381-500-00 Holder for inner sleeve

t Cleaning needle

REF 387-530-00 Cleaning needle

Surgery


tioLogic© pOsition – Rotary instruments1

t Gingiva cutter

REF 382-333-00Gingiva cutter pOsition S

ø 3.3 mm

REF 382-337-00Gingiva cutter pOsition M

ø 3.7 mm

REF 382-342-00Gingiva cutter pOsition M

ø 4.2 mm

REF 382-348-00Gingiva cutter pOsition L

ø 4.8 mm

REF 382-355-00Gingiva cutter pOsition L

ø 5.5 mm

t Depth drill

REF 382-320-09 Depth drill pOsition ø 2.0 mm L 9.0 mm




1 Lenght 17 mm is not available in the tioLogic© pOsition system.

Surgery

43


t Stepped countersink

REF 382-333-11Stepped countersink pOsition S

ø 3.3 mm L 11.0 mm


ø 3.3 mm L 13.0 mm


ø 3.3 mm L 15.0 mm

REF 382-337-09Stepped countersink pOsition M

ø 3.7 mm L 9.0 mm

REF 382-337-11Stepped countersinkr pOsition M

ø 3.7 mm L 11.0 mm


ø 3.7 mm L 13.0 mm


ø 3.7 mm L 15.0 mm


ø 4.2 mm L 9.0 mm


ø 4.2 mm L 11.0 mm


ø 4.2 mm L 13.0 mm


ø 4.2 mm L 15.0 mm

REF 382-348-09Stepped countersink pOsition L

ø 4.8 mm L 9.0 mm


ø 4.8 mm L 11.0 mm


ø 4.8 mm L 13.0 mm


ø 4.8 mm L 15.0 mm


ø 5.5 mm L 9.0 mm


ø 5.5 mm L 11.0 mm


ø 5.5 mm L 13.0 mm


ø 5.5 mm L 15.0 mm

All illustrations on a scale of 1:1 · Subject to alteration

Surgery

44


t Expander

REF 382-533-00 Expander pOsition S ø 3.3 mm

REF 382-537-00 Expander pOsition M ø 3.7 mm


REF 382-548-00 Expander pOsition L ø 4.8 mm


t Thread tap

REF 382-833-00Thread tap pOsition S

ø 3.3 mm

REF 382-837-00Thread tap pOsition M

ø 3.7 mm

REF 382-842-00Thread tap pOsition M

ø 4.2 mm

REF 382-848-00Thread tap pOsition L

ø 4.8 mm

REF 382-855-00Thread tap pOsition L

ø 5.5 mm

1 Lenght 17 mm is not available in the tioLogic© pOsition system.

Surgery

45

Surgery

46

Trays

t ImplantologyREF 387-418-00 tioLogic© easyClean

surgical trayFully equipped for placement of tioLogic© implants

· for ø 3.3 mm / ø 3.7 mm / ø 4.2 mm / ø 4.8 mm / ø 5.5 mm· reusable instruments· standard aluminium container with tioLogic© easyClean Wash-Tray for cleaning and disinfecting machines

· hydrophob PTFE filter· incl. tioLogic© CD-Rom· incl. tioLogic© Surgery Manual

REF 387-419-00 tioLogic© easyClean (without contents)

Wash-Tray (without contents) for cleaning and disinfecting machines

REF 387-412-00 PTFE permanent filter

REF 387-413-00 Indicator tag with adhesive backing

REF 387-415-00 Silicone o-ring, 10 pieces

world innovation

Surgery

47

t

Tray content:

REF 382-015-00 Marking drill ø 1.5 mm REF 382-048-17 Conical former blue (L)

ø 4.8 mm, L 17.0 mm

REF 382-033-00 Surface cutter brown (S) ø 3.3 mm REF 382-433-00 Thread tap brown (S)

ø 3.3 mm

REF 382-037-00 Surface cutter yellow (M) ø 3.7 mm REF 382-437-00 Thread tap yellow (M)

ø 3.7 mm

REF 382-042-00 Surface cutter red (M) ø 4.2 mm REF 382-442-00 Thread tap red (M)

ø 4.2 mm

REF 382-048-00 Surface cutter blue (L) ø 4.8 mm REF 382-448-00 Thread tap blue (L)

ø 4.8 mm

REF 382-055-00 Surface cutter green (L) ø 5.5 mm REF 382-455-00 Thread tap green (L)

ø 5.5 mm

REF 382-020-09 Depth drill ø 2.0 mm, L 9.0 mm REF 382-233-17 Conical former brown (S)

dense bone, ø 3.3 mm

REF 382-020-11 Depth drill ø 2.0 mm, L 11.0 mm REF 382-237-17 Conical former yellow (M)


REF 382-020-13 Depth drill ø 2.0 mm, L 13.0 mm REF 382-242-17 Conical former red (M)


REF 382-020-15 Depth drill ø 2.0 mm, L 15.0 mm REF 382-248-17 Conical former blue (L)


REF 382-020-17 Depth drill ø 2.0 mm, L 17.0 mm REF 382-255-17 Conical former green (L)


REF 382-037-09 Conical former yellow (M) ø 3.7 mm, L 9.0 mm REF 387-600-00 Torque ratchet

REF 382-042-09 Conical former red (M) ø 4.2 mm, L 9.0 mm REF 387-602-00 Sure-grip wheel

REF 382-048-09 Conical former blue (L) ø 4.8 mm, L 9.0 mm REF 387-604-00 Locking key placement aid

REF 382-055-09 Conical former green (L) ø 5.5 mm, L 9.0 mm REF 387-610-00 Hex key SW 1.3 – ISO shank, L 20.0 mm

REF 382-033-11 Conical former brown (S) ø 3.3 mm, L 11.0 mm REF 387-612-00 Hex key SW 1.3 – ISO shank, L 26.0 mm

REF 382-037-11 Conical former yellow (M) ø 3.7 mm, L 11.0 mm REF 387-516-00 Hex key implant SW 2.5 – ISO shank, L 19.0 mm

REF 382-042-11 Conical former red (M) ø 4.2 mm, L 11.0 mm REF 387-518-00 Hex key implant SW 2.5 – ISO shank, L 25.0 mm

REF 382-048-11 Conical former blue (L) ø 4.8 mm, L 11.0 mm REF 387-620-00 Hex key SW 1.3 – ratchet, L 16.0 mm

REF 382-055-11 Conical former green (L) ø 5.5 mm, L 11.0 mm REF 387-622-00 Hex key SW 1.3 – ratchet, L 26.0 mm

REF 382-033-13 Conical former brown (S) ø 3.3 mm, L 13.0 mm REF 387-520-00 Hex key SW 2.5 – ratchet, L 13.0 mm

REF 382-037-13 Conical former yellow (M) ø 3.7 mm, L 13.0 mm REF 387-522-00 Hex key SW 2.5 – ratchet, L 23.0 mm

REF 382-042-13 Conical former red (M) ø 4.2 mm, L 13.0 mm REF 387-510-00 Drill extension – ISO shank, L 21.0 mm

REF 382-048-13 Conical former blue (L) ø 4.8 mm, L 13.0 mm REF 387-511-00 Adapter – ISO shank / ratchet, L 13.0 mm

REF 382-055-13 Conical former green (L) ø 5.5 mm, L 13.0 mm REF 387-514-00 Paralleling pin

ø 1.4 / 2.0 mm, L 27.0 mm, 3 pieces

REF 382-033-15 Conical former brown (S) ø 3.3 mm, L 15.0 mm REF 387-523-00 Insertions key S – ratchet

for implant ø 3.3 mm

REF 382-037-15 Conical former yellow (M) ø 3.7 mm, L 15.0 mm REF 387-524-00 Insertions key M – ratchet

for implant ø 3.7 mm / ø 4.2 mm

REF 382-042-15 Conical former red (M) ø 4.2 mm, L 15.0 mm REF 387-525-00 Insertions key L – ratchet


REF 382-048-15 Conical former blue (L) ø 4.8 mm, L 15.0 mm REF 387-640-00 Insertion key bar abutment – ratchet

REF 382-055-15 Conical former green (L) ø 5.5 mm, L 15.0 mm REF 387-660-00 Insertion key ball attachment abutment – ratchet

REF 382-033-17 Conical former brown (S) ø 3.3 mm, L 17.0 mm REF 387-415-00 Silicone o-ring

10 pieces

REF 382-037-17 Conical former yellow (M) ø 3.7 mm, L 17.0 mm

REF 382-042-17 Conical former red (M) ø 4.2 mm, L 17.0 mm

Surgery

48

Trays

t ImplantologyREF 387-410-00 tioLogic© surgical tray Fully equipped for placement of

tioLogic© implants

· for ø 3.3 mm / ø 3.7 mm / ø 4.2 mm / ø 4.8 mm / ø 5.5 mm

· standard aluminium container with stainless steel insert

· hydrophob PTFE filter

· incl. tioLogic© CD-ROM

· incl. tioLogic© Surgery Manual


REF 387-413-00 Indicator tag with adhesive backing

REF 387-415-00 Silicone o-ring 10 pieces

Surgery

49

t

Tray content:

REF 382-015-00 Marking drill ø 1.5 mm REF 382-048-17 Conical former blue (L)

ø 4.8 mm, L 17.0 mm

REF 382-033-00 Surface cutter brown (S) ø 3.3 mm REF 382-433-00 Thread tap brown (S)

ø 3.3 mm

REF 382-037-00 Surface cutter yellow (M) ø 3.7 mm REF 382-437-00 Thread tap yellow (M)

ø 3.7 mm

REF 382-042-00 Surface cutter red (M) ø 4.2 mm REF 382-442-00 Thread tap red (M)

ø 4.2 mm

REF 382-048-00 Surface cutter blue (L) ø 4.8 mm REF 382-448-00 Thread tap blue (L)

ø 4.8 mm

REF 382-055-00 Surface cutter green (L) ø 5.5 mm REF 382-455-00 Thread tap green (L)

ø 5.5 mm

REF 382-020-09 Depth drill ø 2.0 mm, L 9.0 mm REF 382-233-17 Conical former brown (S)


REF 382-020-11 Depth drill ø 2.0 mm, L 11.0 mm REF 382-237-17 Conical former yellow (M)


REF 382-020-13 Depth drill ø 2.0 mm, L 13.0 mm REF 382-242-17 Conical former red (M)


REF 382-020-15 Depth drill ø 2.0 mm, L 15.0 mm REF 382-248-17 Conical former blue (L)


REF 382-020-17 Depth drill ø 2.0 mm, L 17.0 mm REF 382-255-17 Conical former green (L)


REF 382-037-09 Conical former yellow (M) ø 3.7 mm, L 9.0 mm REF 387-600-00 Torque ratchet

REF 382-042-09 Conical former red (M) ø 4.2 mm, L 9.0 mm REF 387-602-00 Sure-grip wheel

REF 382-048-09 Conical former blue (L) ø 4.8 mm, L 9.0 mm REF 387-604-00 Locking key placement aid

REF 382-055-09 Conical former green (L) ø 5.5 mm, L 9.0 mm REF 387-610-00 Hex key SW 1.3 – ISO shank, L 20.0 mm

REF 382-033-11 Conical former brown (S) ø 3.3 mm, L 11.0 mm REF 387-612-00 Hex key SW 1.3 – ISO shank, L 26.0 mm

REF 382-037-11 Conical former yellow (M) ø 3.7 mm, L 11.0 mm REF 387-516-00 Hex key implant SW 2.5 – ISO shank, L 19.0 mm

REF 382-042-11 Conical former red (M) ø 4.2 mm, L 11.0 mm REF 387-518-00 Hex key implant SW 2.5 – ISO shank, L 25.0 mm

REF 382-048-11 Conical former blue (L) ø 4.8 mm, L 11.0 mm REF 387-620-00 Hex key SW 1.3 – ratchet, L 16.0 mm

REF 382-055-11 Conical former green (L) ø 5.5 mm, L 11.0 mm REF 387-622-00 Hex key SW 1.3 – ratchet, L 26.0 mm

REF 382-033-13 Conical former brown (S) ø 3.3 mm, L 13.0 mm REF 387-519-00 Hex key SW 2.5 – ratchet, L 8.0 mm

REF 382-037-13 Conical former yellow (M) ø 3.7 mm, L 13.0 mm REF 387-520-00 Hex key SW 2.5 – ratchet, L 13.0 mm

REF 382-042-13 Conical former red (M) ø 4.2 mm, L 13.0 mm REF 387-522-00 Hex key SW 2.5 – ratchet, L 23.0 mm

REF 382-048-13 Conical former blue (L) ø 4.8 mm, L 13.0 mm REF 387-510-00 Drill extension – ISO shank, L 21.0 mm

REF 382-055-13 Conical former green (L) ø 5.5 mm, L 13.0 mm REF 387-511-00 Adapter – ISO shank / ratchet, L 13.0 mm

REF 382-033-15 Conical former brown (S) ø 3.3 mm, L 15.0 mm REF 387-514-00 Paralleling pin

ø 1.4 / 2.0 mm, L 27.0 mm, 3 pieces

REF 382-037-15 Conical former yellow (M) ø 3.7 mm, L 15.0 mm REF 387-523-00 Insertions key S – ratchet*


REF 382-042-15 Conical former red (M) ø 4.2 mm, L 15.0 mm REF 387-524-00 Insertions key M – ratchet*


REF 382-048-15 Conical former blue (L) ø 4.8 mm, L 15.0 mm REF 387-525-00 Insertions key L – ratchet*


REF 382-055-15 Conical former green (L) ø 5.5 mm, L 15.0 mm REF 387-640-00 Insertion key bar abutment – ratchet

REF 382-033-17 Conical former brown (S) ø 3.3 mm, L 17.0 mm REF 387-660-00 Insertion key ball attachment abutment – ratchet

REF 382-037-17 Conical former yellow (M) ø 3.7 mm, L 17.0 mm REF 387-415-00 Silicone o-ring

10 pieces

REF 382-042-17 Conical former red (M) ø 4.2 mm, L 17.0 mm

Surgery

50

Trays

t ImplantologyREF 387-420-00 tioLogic© pOsition

Surgical TrayFully equipped for template-guided placement of tioLogic© implants

· for ø 3.3 mm / ø 3.7 mm / ø 4.2 mm / ø 4.8 mm / ø 5.5 mm· reusable internally cooled instruments· standard aluminium sterilisation container with stainless steel insert

· hydrophobic PTFE permanent filter· incl. tioLogic© pOsition manual· incl. tioLogic© CD-Rom· incl. tioLogic© Surgery Manual


REF 387-413-00 Indicator tag with adhesive bridges

REF 387-415-00 Silicone O-ring 10 pieces

Surgery

51

t

Tray content:

REF 387-600-00 Torque ratchet REF 382-555-00 Expander pOsition L ø 5.5 mm

REF 387-604-00 Locking key placement aid REF 382-833-00 Thread tap pOsition S ø 3.3 mm

REF 382-333-00 Gingiva cutter pOsition S ø 3.3 mm REF 382-837-00 Thread tap pOsition M

ø 3.7 mm

REF 382-337-00 Gingiva cutter pOsition M ø 3.7 mm REF 382-842-00 Thread tap pOsition M

ø 4.2 mm

REF 382-342-00 Gingiva cutter pOsition M ø 4.2 mm REF 382-848-00 Thread tap pOsition L

ø 4.8 mm

REF 382-348-00 Gingiva cutter pOsition L ø 4.8 mm REF 382-855-00 Thread tap pOsition L

ø 5.5 mm

REF 382-355-00 Gingiva cutter pOsition L ø 5.5 mm REF 387-602-00 Sure-grip wheel

REF 382-320-09 Depth drill pOsition ø 2.0 mm, L 9.0 mm REF 381-333-00 Set inner sleeve S

ø 3.3 mm

REF 382-320-11 Depth drill pOsition ø 2.0 mm, L 11.0 mm REF 381-337-00 Set inner sleeve M

ø 3.7 mm

REF 382-320-13 Depth drill pOsition ø 2.0 mm, L 13.0 mm REF 381-342-00 Set inner sleeve M

ø 4.2 mm

REF 382-320-15 Depth drill pOsition ø 2.0 mm, L 15.0 mm REF 381-348-00 Set inner sleeve L

ø 4.8 mm

REF 382-333-11 Stepped countersink pOsition S ø 3.3 mm, L 11.0 mm REF 381-355-00 Set inner sleeve L

ø 5.5 mm

REF 382-333-13 Stepped countersink pOsition S ø 3.3 mm, L 13.0 mm REF 381-500-00 Holder for inner sleeve

3 pieces

REF 382-333-15 Stepped countersink pOsition S ø 3.3 mm, L 15.0 mm REF 387-610-00 Hex key SW 1.3 – ISO shank, L 20.0 mm

REF 382-337-09 Stepped countersink pOsition M ø 3.7 mm, L 9.0 mm REF 387-612-00 Hex key SW 1.3 – ISO shank, L 26.0 mm

REF 382-337-11 Stepped countersink pOsition M ø 3.7 mm, L 11.0 mm REF 387-516-00 Hex key implant SW 2.5 – ISO shank, L 19.0 mm

REF 382-337-13 Stepped countersink pOsition M ø 3.7 mm, L 13.0 mm REF 387-518-00 Hex key implant SW 2.5 – ISO shank, L 25.0 mm

REF 382-337-15 Stepped countersink pOsition M ø 3.7 mm, L 15.0 mm REF 387-620-00 Hex key SW 1.3 – ratchet, L 16.0 mm





REF 382-348-09 Stepped countersink pOsition L ø 4.8 mm, L 09.0 mm REF 387-510-00 Drill extension – ISO shank, L 21.0 mm

REF 382-348-11 Stepped countersink pOsition L ø 4.8 mm, L 11.0 mm REF 387-511-00 Adapter – ISO shank / ratchet, L 13.0 mm

REF 382-348-13 Stepped countersink pOsition L ø 4.8 mm, L 13.0 mm REF 387-514-00 Paralleling pin

ø 1.4 / 2.0 mm, L 9.0 mm, 3 pieces

REF 382-348-15 Stepped countersink pOsition L ø 4.8 mm, L 15.0 mm REF 387-523-00 Insertions key S – ratchet


REF 382-355-09 Stepped countersink pOsition L ø 5.5 mm, L 9.0 mm REF 387-524-00 Insertions key M – ratchet


REF 382-355-11 Stepped countersink pOsition L ø 5.5 mm, L 11.0 mm REF 387-525-00 Insertions key L – ratchet


REF 382-355-13 Stepped countersink pOsition L ø 5.5 mm, L 13.0 mm REF 387-640-00 Insertion key bar abutment – ratchet

REF 382-355-15 Stepped countersink pOsition L ø 5.5 mm, L 15.0 mm REF 387-660-00 Insertion key ball abutment – ratchet

REF 382-533-00 Expander pOsition S ø 3.3 mm REF 387-415-00 Silicone o-ring

10 pieces




Surgery

52

Trays

t Implantology

REF 387-414-00 tioLogic© instrument tray With accessory components for exposure, gingival forming, fitting the prosthetic restoration

· for all implant diameters

· high-strength plastic tray, anodized aluminium cover

Surgery

53

t

Tray content:

REF 387-600-00 Torque ratchet

REF 387-602-00 Sure-grip wheel

REF 387-604-00 Locking key placement aid

REF 387-610-00 Hex key SW 1.3 – ISO shank, L 20.0 mm

REF 387-612-00 Hex key SW 1.3 – ISO shank, L 26.0 mm

REF 387-516-00 Hex key implant SW 2.5 – ISO shank, L 19.0 mm

REF 387-518-00 Hex key implant SW 2.5 – ISO shank, L 25.0 mm

REF 387-620-00 Hex key SW 1.3 – ratchet, L 16.0 mm





REF 387-510-00 Drill extension – ISO shank

REF 387-511-00 Adapter – ISO shank / ratchet, L 13.0 mm

REF 387-514-00 Paralleling pin ø 1.4 / 2.0 mm, L 9.0 mm, 3 pieces

REF 387-523-00 Insertions key S – ratchet for implant ø 3.3 mm

REF 387-524-00 Insertions key M – ratchet for implant ø 3.7 mm / ø 4.2 mm

REF 387-525-00 Insertions key L – ratchet for implant ø 4.8 mm / ø 5.5 mm

REF 387-640-00 Insertion key bar abutment – ratchet

REF 387-660-00 Insertion key ball abutment – ratchet


Surgery

54

Trays

t Osteotome

REF 350-102-00 Osteotome tray Complete with osteotomes and bone chisels, for an optimum implant site with tioLogic© implants

· convex, straight / angled

· Bone chisel, 4.0 and 6.0 mm

· grip optimized to the anatomical shape of the hand with exchangeable handles

· high-quality tray for maximum protection and perfect overview

Surgery

55

t

Tray content:

REF 350-105-00 OsteotomicHold

REF 350-140-00Osteotome convex, straight

ø 2.4 mm


ø 3.1 mm


ø 3.7 mm


ø 4.2 mm

REF 350-145-00Osteotome convex, angled

ø 2.4 mm


ø 3.1 mm


ø 3.7 mm


ø 4.2 mm

REF 350-160-00 Bone chisel 4.0 mm


t Osteotome / Single items

REF 350-106-00 Surgical mallet

REF 350-105-00 OsteotomicHold


ø 2.4 mm


ø 3.1 mm


ø 3.7 mm


ø 4.2 mm


ø 2.4 mm


ø 3.1 mm


ø 3.7 mm


ø 4.2 mm

REF 350-150-00Osteotome concave, straight

ø 2.4 mm


ø 3.1 mm


ø 3.7 mm


ø 4.2 mm

REF 350-155-00Osteotome concave, angled

ø 2.4 mm


ø 3.1 mm


ø 3.7 mm


ø 4.2 mm



Surgery

56

Surgery

57

Surgery

58

Trays

t Instruments

REF 350-010-00 TIOSET® instrument tray Complete with instrumentarium for dental surgery and implantology (designed by Dr. M. Sontheimer)

· all instrument functions specially redesigned and modified for use in surgery and implantology

· optimal handling due to the uniform design of the instrument handles

· impact-resistant and systematic storage of instruments in the specially designed wash-tray

Surgery

59

t

Tray content: Dental mirror 2 pieces

Wide support surface for retracting the corner of the mouth. No injury to the corner of the mouth.

Dental probe Exchangeable attachment.

Periodontal measuring modified

For checking the bone depth after pilot drilling.

Dental tweezers Slimline.

Tissue forceps Special serrations (very small and slender) hold the tissue flap securely and atraumatically.

Scraper For removing soft tissue debris and for smoothing edges of bone.

Sharp curette For removing soft tissue debris (e.g. from the alveolus) and grafting bone material.

Ball-end plugger For adapting grafted bone or augmentation material.

Double retractor For gentle retraction of the mucoperiosteal flap. No traumatization of the tissue due to reliable contact with the bone. Narrow side for use in distal area, broad side for use in the anterior area.

Raspatory broad

An additional instrument for gently loosening the mucoperiosteal flap.

Raspatory narrow

For loosening the mucoperiosteal flap at the incision or papillae.

Micro-scissors For thinning or cutting the mucoperiosteum flap.

Needle holder Slimline, long shape allows universal use.

La Grange scissors Can be used for all areas due to the dual-curve design.

Graft material dish For collecting bone harvested during implant placement with the implant system or for mixing graft material.

Drill block For secure storage of drills.

Bone augmentation material

t NanoBone® grain size 0.6 x 2.0 mm

REF 360-600-00 NanoBone® granulate Contents 1 x 0.6 ml






t NanoBone® grain size 1.0 x 2.0 mm





t NanoBone® block

REF 360-622-00 NanoBone® block 5.0 x 10.0 x 15.0 mm

REF 360-300-002-hole Microplate, titanium

REF 360-280-00Bone screw titanium to fix bone blocks, 2 pieces

1.5 x 11.0 mm

Surgery

60

Surgery

L

SM

tioLogic© implants

t ø 3.3 mm S

REF 383-033-11 tioLogic© implant S ø 3.3 mm L 11.0 mm




supplied with closure screw S

t ø 3.7 mm M

REF 383-037-09 tioLogic© implant M ø 3.7 mm L 9.0 mm





supplied with closure screw M

t ø 4.2 mm M






supplied with closure screw M

t ø 4.8 mm L

REF 383-048-09 tioLogic© implant L ø 4.8 mm L 9.0 mm





supplied with closure screw L

t ø 5.5 mm L





supplied with closure screw L


L

SM

Gingiva formers

t conical

REF 384-110-00 Gingiva former Sconical GH 1.5 mm




REF 384-210-00 Gingiva former Mconical GH 1.5 mm




REF 384-310-00 Gingiva former Lconical GH 1.5 mm




Surgery


Surgery

L

SM

Gingiva formers

t cylindrical

REF 384-120-00 Gingiva former Scylindrical GH 1.5 mm




REF 384-220-00 Gingiva former Mcylindrical GH 1.5 mm




REF 384-320-00 Gingiva former Lcylindrical GH 1.5 mm





Prosthetics

t The S - M- L concept 66 – 67

t Series of abutments S 68 – 75Impression 70Model 70Temporary restorations 70CAD / CAM Scan abutment 70CAD / CAM Titanium base Zenotec 70Ceramics 71Precious metal 71Titanium 71Bars and bridges 72LOCATOR® 73Ball abutments 74Magnet 75

t Series of abutments M 76 – 83Impression 78Model 78Temporary restorations 78CAD / CAM Scan abutment 78CAD / CAM Titanium base Zenotec 78Ceramics 79Precious metal 79Titanium 79Bars and bridges 80LOCATOR® 81Ball abutments 82Magnet 83

t Series of abutments L 84 – 91Impression 86Model 86Temporary restorations 86CAD / CAM Scan abutment 86CAD / CAM Titanium base Zenotec 86Ceramics 87Precious metal 87Titanium 87Bars and bridges 88LOCATOR® 89Ball abutments 90Magnet 91

64

Prosthetics

Prosthetic components Aesthetics and customizability Prosthetic components of a modern implant system should provide the dental technician with

the ideal combination of aesthetics, customizability, clear organization and easy handling. This not only involves having an optimum selection of prosthetic components in different materials for all indications but also efficient component flexibility. The user has a choice of all prosthetic components in 3 prosthetic series of abutments (S - M - L) with 5 implant diameters.

Prosthetics

65

Pro

sth

etics

Easy handlingThe S - M - L concept

3 series of abutments for 5 implant diameters

S M L

S M L

M LM LS

ø 3.7 ø 4.2 ø 4.8 ø 5.5ø 3.3

ø 3.7 mm ø 4.2 mm

ø 4.8 mm ø 5.5 mm

ø 3.3 mm SML

Prosthetics

66

5 implant diameters – 5 implant lengths – 3 series of abutments Integrated platform focussing – impressive flexibility The user has a choice of 5 implant diameters, 5 implant lengths and 3 series of abutments (S - M - L concept).

Implant diameters Series of abutments

The optimal grading of implant diameters and lengths ensures that the appropriate implant is used for the indication. Components of the 3 series of abutments are made of plastic (temporaries), zirconia, titanium and precious metal and include, bars, ball abutment, LOCATOR® and magnets. The construction components S are used for the implant diameter 3.3 mm, the construction components M for the implant diameters 3.7 mm and 4.2 mm and the construction components L for the implant diameters 4.8 mm and 5.5 mm. For exact identification all components are marked with S, M or L by laser.

All abutments and implants on a scale of 1:1

ø 3.3 ø 3.7 ø 4.2 ø 4.8 ø 5.5

9.0 mm

11.0 mm

13.0 mm

15.0 mm

17.0 mm

3 series of abutments

S M L

Imp

lan

ts

67

Prosthetic screw

68

M

M

MM

ø 3.7 ø 4.2

L

L

LL

ø 4.8 ø 5.5

S

S

S

ø 3.3

Series of abutments Sfor ø 3.3 mm tioLogic© implants

Prosthetics

69

Serie

s o

f a

bu

tm

en

ts S

Components series of abutments S

t Impression

REF 385-110-00 Impression post S, openincl. screw

L 10.0 mm

REF 385-112-00 Impression post S, openincl. screw

L 14.0 mm

REF 385-910-00 Screwfor impression post, open, L 10.0 mm

M 1.6 L 16.0 mm


M 1.6 L 25.0 mm

REF 385-120-00

Impression post S, closedincl. impression cap S, bite registration cap S and screw

L 7.0 mm

REF 385-122-00 Impression cap S 5 pieces

L 6.0 mm

REF 385-123-00 Bite registration cap S 5 pieces

L 6.0 mm

REF 385-124-00 Positioning aid S for impression post S, closed

L 9.6 mm

t Model

REF 385-130-00 Laboratory implant S L 12.0 mm

t Temporary restorations

REF 384-130-00 Temporary abutment S incl. screw

GH 3.0 mm L 12.0 mm

REF 384-910-00 Screwfor temporary abutment

M 1.6 L 13.5 mm

t CAD / CAM scan abutment

REF 386-190-00Scan abutment S, customizable, incl. AnoTite screw

t CAD / CAM titanium base Zenotec

REF 386-180-00 Titanium cap S, Zenotec®, Wieland, incl. AnoTite screw

Prosthetics


Prosthetics


t Ceramics

REF 386-110-00 Ceramic abutment Sincl. AnoTite screw

GH 3.0 mm L 9.6 mm

REF 386-111-00 Ceramic abutment S incl. AnoTite screw

GH 2.0 mm L 9.6 mm, 15°

REF 386-113-00Titanium base ceramic abutment S incl. AnoTite screw

REF 386-910-00 AnoTite screwM 1.6 L 9.0 mm

REF 386-914-00 Prosthetic screw, Titanium for laboratory use only

M 1.6 L 9.0 mm

t Precious metal

REF 386-115-00

Precious metal abutment S, cast on incl. AnoTite screw L 12.0 mm



M 1.6 L 9.0 mm

t Titanium

REF 386-130-00 Titanium abutment S incl. AnoTite screw

GH 1.0 mm L 7.0 mm


GH 2.5 mm L 8.5 mm


GH 4.0 mm L 10.0 mm


GH 1.5 mm L 9.0 mm, 15°


GH 3.0 mm L 10.5 mm, 15°

REF 386-139-00 Titanium abutment S, adjustable incl. AnoTite screw

GH 2.5 mm L 12.0 mm



M 1.6 L 9.0 mm



t Bars and bridges

REF 386-140-00 Bar abutment S GH 1.0 mm




REF 386-410-00 Closure screw, bar L 3.3 mm

REF 386-412-00 Impression post, barincl. screw

L 10.0 mm

REF 386-414-00 Screw impression post, barM 1.6 L 21.0 mm

REF 386-416-00 Laboratory implant, bar L 12.0 mm

REF 386-418-00Precious metal cap, bar incl. AnoTite screw L 12.0 mm

REF 386-420-00 Plastic cap, bar incl. AnoTite screw

L 12.0 mm

REF 386-422-00 Titanium cap, bar incl. AnoTite screw

L 4.5 mm

REF 386-426-00Titanium cap, bar, adhesive techniqueincl. AnoTite screw

L 4.5 mm

REF 386-430-00 Provisional titanium cap, barincl. AnoTite screw

L 10.8 mm

REF 386-444-00 Resilient bar plastic, macro L 50.0 mm

REF 386-446-00 Bar rider Au / Pt, milled L 50.0 mm

REF 330-770-00Resilient bar rematitan®, macro

L 40.0 mm B 2.1 mm H 3.0 mm

REF 330-772-00Bar rider and retention rematitan®, macro

L 40.0 mm

REF 386-912-00 AnoTite screw bar abutment

M 1.6 L 6.0 mm

REF 386-916-00Prosthetic screw, bar abutment, Titaniumfor laboratory use only

M 1.6 L 6.0 mm

Prosthetics

72

Prosthetics


t LOCATOR®

REF 386-151-00 LOCATOR® abutment S GH 1.0 mm





REF 386-512-00 LOCATOR® impression cap4 pieces

L 4.0 mm

REF 386-514-00 LOCATOR® laboratory implantø 4.0 mm L 10.0 mm

REF 386-516-00

LOCATOR® laboratory set Retentions housing with black processing insert. Retentions insert: transparent, pink and blue. LOCATOR® blocking ring

1 piece

REF 386-518-00 LOCATOR® processing insert4 pieces

black

REF 386-520-00 LOCATOR® retention insert4 pieces

transparent, 0 – 10° medium 2.270 g


pink, 0 – 10° low 1.365 g


blue, 0 – 10° very low 680 g

REF 386-530-00 LOCATOR® blocking ring20 pieces

white

REF 386-534-00LOCATOR® angled measuring post4 pieces

L 8.0 mm

73


t Ball abutment

REF 386-160-00 Ball abutment SGH 1.5 mm Ball abutment ø 2.25 mm



REF 386-614-00Laboratory implant, ball abutment

REF 386-617-00 Matrix Unor Ecco Ti / Plasticred high, approx. 1.200 g

REF 386-616-00 Matrix Unor Ecco Ti / Plasticgreen standard, approx. 800 g

REF 386-620-00Inner matrix Unor Ecco Ti / Plastic

red high, approx. 1.200 g


green standard, approx. 800 g


yellow low, approx. 600 g

REF 386-622-00 Matrix Unor Ecco Au / Pt standard, approx. 800 g

REF 386-624-00Inner matrix Unor Ecco Au / Pt

standard, approx. 800 g


high, for severely worn patrices

Prosthetics


Prosthetics


t Magnet

REF 386-170-00Steco Titanmagnetics® insert S x-Line

GH 3.0 mm

REF 386-171-00Steco Titanmagnetics® insert S x-Line

GH 4.5 mm

REF 386-712-00Steco Titanmagnetics® impression post x-Line

L 7.0 mm

REF 386-714-00Steco Titanmagnetics® laboratory implant x-Line

L 9.0 mm

REF 386-716-00Steco dentures Titanmagnetics® x-Line

L 2.6 mm

REF 386-718-00Steco positioning sleeve x-Line, supragingival

REF 386-720-00Steco positioning sleeve x-Line, subgingival

75

76

M

M

MM

ø 3.7 ø 4.2

L

L

LL

ø 4.8 ø 5.5

S

S

S

ø 3.3

Series of abutments Mfor ø 3.7 mm and ø 4.2 mm tioLogic© implants

Prosthetics

77

Serie

s o

f a

bu

tm

en

ts M

Components series of abutments M

t Impression

REF 385-210-00 Impression post M, openincl. screw

L 10.0 mm

REF 385-212-00 Impression post M, openincl. screw

L 14.0 mm


M 1.6 L 16.0 mm


M 1.6 L 25.0 mm

REF 385-220-00Impression post M, closedincl. impression cap M, bite registration cap M and screw

L 7.0 mm

REF 385-222-00 Impression cap M 5 caps

L 6.0 mm

REF 385-223-00 Bite registration cap M 5 caps

L 6.0 mm

REF 385-224-00 Positioning aid M for impression post M, closed

L 9.6 mm

t Model

REF 385-230-00 Laboratory implant M L 12.0 mm


REF 384-230-00 Temporary abutment M incl. screw

GH 3.0 mm L 12.0 mm

REF 384-910-00 Screw for temporary abutment

M 1.6 L 13.5 mm

t CAD / CAM Scan abutment

REF 386-290-00Scan abutment M, costumizable, incl. AnoTite screw


REF 386-280-00 Titanium cap M, Zenotec®, Wieland, incl. AnoTite screw

Prosthetics


Prosthetics


t Ceramics

REF 386-210-00 Ceramic abutment M incl. AnoTite screw

GH 3.0 mm L 9.6 mm

REF 386-211-00 Ceramic abutment M incl. AnoTite screw

GH 2.0 mm L 9.6 mm, 15°

REF 386-213-00Titanium base ceramic abutment M incl. AnoTite screw



M 1.6 L 9.0 mm

t Precious metal

REF 386-215-00Precious metal abutment M, cast on incl. AnoTite screw

L 12.0 mm



M 1.6 L 9.0 mm

t Titanium

REF 386-230-00 Titanium abutment M incl. AnoTite screw

GH 1.0 mm L 7.0 mm


GH 2.5 mm L 8.5 mm


GH 4.0 mm L 10.0 mm


GH 1.5 mm L 9.0 mm, 20°


GH 3.0 mm L 10.5 mm, 20°

REF 386-239-00 Titanium abutment M, adjustable incl. AnoTite screw

GH 2.5 mm L 12.0 mm



M 1.6 L 9.0 mm



t Bars and bridges

REF 386-240-00 Bar abutment M GH 1.0 mm





REF 386-412-00 Impression post, bar incl. screw

L 10.0 mm



REF 386-418-00 Precious metal cap, bar incl. AnoTite screw

L 12.0 mm


L 12.0 mm

REF 386-422-00 Titanium cap, barincl. AnoTite screw

L 4.5 mm


L 4.5 mm


L 10.8 mm




L 40.0 mm B 2.1 mm H 3.0 mm


L 40.0 mm

REF 386-912-00 AnoTite screw, bar abutment

M 1.6 L 6.0 mm


M 1.6 L 6.0 mm

Prosthetics

80

Prosthetics


t LOCATOR®

REF 386-251-00 LOCATOR® abutment M GH 1.0 mm






L 4.0 mm


REF 386-516-00


1 piece


black


transparent, 0 – 10°, medium 2.270 g


pink, 0 – 10°, low 1.365 g


blue, 0 – 10°, very low 680 g


green*, extended angulation 10 – 20°, 1.815 g


red*, extended angulation 10 – 20°, 680 g


white

REF 386-534-00LOCATOR® angled measuring post 4 pieces

L 8.0 mm

* not admitted for tioLogic® Implants S ø 3.3 mm

81


t Ball abutment

REF 386-260-00 Ball abutment MGH 1.5 mm Ball abutment ø 2.25 mm






REF 386-620-00Inner matrix Unor Ecco Ti/Plastic











Prosthetics


Prosthetics


t Magnet

REF 386-270-00Steco Titanmagnetics® insert M x-Line

GH 3.0 mm

REF 386-271-00Steco Titanmagnetics® insert M x-Line

GH 4.5 mm


L 7.0 mm


L 9.0 mm


L 2.6 mm



83

84

M

M

MM

ø 3.7 ø 4.2

L

L

LL

ø 4.8 ø 5.5

S

S

S

ø 3.3

Series of abutments Lfor ø 4.8 mm and ø 5.5 mm tioLogic© implants

Prosthetics

85

Serie

s o

f a

bu

tm

en

ts L

Components series of abutments L

t Impression

REF 385-310-00 Impression post L, openincl. screw

L 10.0 mm

REF 385-312-00 Impression post L, openincl. screw

L 14.0 mm


M 1.6 L 16.0 mm


M 1.6 L 25.0 mm

REF 385-320-00

Impression post L, closedincl. impression cap L, bite registration cap L and screw

L 7.0 mm

REF 385-322-00 Impression cap L 5 pieces

L 6.0 mm

REF 385-323-00 Bite registration cap L 5 pieces

L 6.0 mm

REF 385-324-00 Positioning aid L for impression post L, closed

L 9.6 mm

t Model

REF 385-330-00 Laboratory implant L L 12.0 mm


REF 384-330-00 Temporary abutment L incl. screw

GH 3.0 mm L 12.0 mm

REF 384-910-00 Screw for temporary abutment

M 1.6 L 13.5 mm

t CAD / CAM scan abutment

REF 386-390-00Scan abutment L, customizable, incl. AnoTite screw


REF 386-380-00 Titanium cap L, Zenotec®, Wieland, incl. AnoTite screw

Prosthetics


Prosthetics


t Ceramics

REF 386-310-00 Ceramic abutment Lincl. AnoTite screw

GH 3.0 mm L 9.6 mm

REF 386-311-00 Ceramic abutment Lincl. AnoTite screw

GH 2.0 mm L 9.6 mm, 15°

REF 386-313-00Titanium base ceramic abutment Lincl. AnoTite screw



M 1.6 L 9.0 mm

t Precious metal

REF 386-315-00Precious metal abutment L, cast onincl. AnoTite screw

L 12.0 mm



M 1.6 L 9.0 mm

t Titan

REF 386-330-00 Titanium abutment L incl. AnoTite screw

GH 1.0 mm L 7.0 mm

REF 386-331-00 Titanium abutment Lincl. AnoTite screw

GH 2.5 mm L 8.5 mm


GH 4.0 mm L 10.0 mm


GH 1.5 mm L 9.0 mm, 20°


GH 3.0 mm L 10.5 mm, 20°

REF 386-339-00 Titanium abutment L, adjustableincl. AnoTite screw

GH 2.5 mm L 12.0 mm


REF 386-914-00 Prosthetic screw, Titaniumfor laboratory use only

M 1.6 L 9.0 mm



t Bars and bridges

REF 386-340-00 Bar abutment L GH 1.0 mm





REF 386-412-00 Impression post, barincl. screw

L 10.0 mm



REF 386-418-00 Precious metal cap, bar incl. AnoTite screw

L 12.0 mm


L 12.0 mm

REF 386-422-00 Titanium cap, barincl. AnoTite screw

L 4.5 mm


L 4.5 mm


L 10.8 mm




L 40.0 mm B 2.1 mm H 3.0 mm


L 40.0 mm

REF 386-912-00 AnoTite screwbar abutment

M 1.6 L 6.0 mm


M 1.6 L 6.0 mm

Prosthetics

88

Prosthetics


t LOCATOR®

REF 386-351-00 LOCATOR® abutment L GH 1.0 mm






L 4.0 mm


REF 386-516-00


1 piece


black


transparent, 0 – 10°, medium 2.270 g


pink, 0 – 10°, low 1.365 g


blue, 0 – 10°, very low 680 g


green*, extended angulation 10 – 20°, 1.815 g


red* extended angulation 10 – 20°, 680 g


white


L 8.0 mm

* not admitted for tioLogic® Implants S ø 3.3 mm



t Ball abutments

REF 386-360-00 Ball abutment LGH 1.5 mm Ball abutment ø 2.25 mm

















Prosthetics


Prosthetics

91


t Magnet

REF 386-370-00Steco Titanmagnetics® insert L x-Line

GH 3.0 mm

REF 386-371-00Steco Titanmagnetics® insert L x-Line

GH 4.5 mm


L 7.0 mm


L 9.0 mm


L 2.6 mm



Accessories

t Surgical accessories 94 – 95

t Surgical and prosthetic accessories 96

t Prosthetic accessories 97

t Training implants 98

92

Accessories

Accessories Precise, reliable technique Product development of surgical and prosthetic accessories at Dentaurum Implants also

focuses on the user. An efficient, reliable, precise technique is only possible with an implant system that has specifically designed accessories, e.g. a functionally reliable torque ratchet or optimal laboratory preparation instruments.

93

Acce

sso

ries

Accessories

Surgical accessories

t

REF 387-509-00Drill extension – ISO shank-Hexagon

L 21.0 mm

REF 387-510-00Drill extension – ISO shank

L 21.0 mm

REF 387-511-00Adapter – ISO shank / ratchet

L 13.0 mm

REF 387-514-00 Paralleling pin ø 1.4 / 2.0 mm L 27.0 mm

REF 387-523-00Insertion key S / ratchetfor implants ø 3.3 mm

REF 387-524-00Insertion key M / ratchefor implants ø 3.7 mm / ø 4.2 mm

REF 387-525-00Insertions key L / ratchefor implants ø 4.8 mm / ø 5.5 mm

REF 387-515-00Hex key implant ISO shank-Hexagon

SW 2.5 L 19.0 mm

REF 387-516-00Hex key implant ISO shank

SW 2.5 L 19.0 mm

REF 387-517-00Hex key implant ISO shank-Hexagon

SW 2.5 L 25.0 mm

REF 387-518-00Hex key implant ISO shank

SW 2.5 L 25.0 mm

REF 387-519-00Hex key ratchet

SW 2.5 L 8.0 mm


SW 2.5 L 13.0 mm


SW 2.5 L 23.0 mm

REF 300-006-00 Material plates 3 pieces

REF 381-500-00 Holder for inner sleeves

REF 387-530-00 Cleaning needle

Accessories

94

Accessories

95

Surgical accessories

t Boneregeneration / Single items

REF 360-100-00 Titanium Mesh 20.0 x 10.0 x 0.2 mm



REF 360-210-00Bone screw, titanium 5 pieces

1.0 x 2.0 mm


1.0 x 3.0 mm


1.0 x 4.0 mm


1.0 x 5.0 mm


1.2 x 3.0 mm

REF 360-260-00Bone screw, titanium for fixing bone blocks in position, 5 pieces

1.5 x 7.0 mm


1.5 x 9.0 mm


1.5 x 11.0 mm

REF 360-400-00 Screwdriver handle

REF 360-401-00Screwdriver square tip for screw ø 1.0 mm / 1.2 mm

REF 360-402-00Screwdriver square tip for screw ø 1.5 mm

REF 360-405-00Wrench for screw ø 1.0 mm / 1.2 mm

REF 360-406-00Wrench for screw ø 1.5 mm

REF 360-410-00Wire cutter, curved

REF 360-500-00Pre-Drill with depth stop

0.7 x 3.5 mm

REF 360-501-00Pre-Drill with depth stop

1.1 x 7.0 mm

REF 360-502-00Pre-Drill for predrilling bone blocks

1.1 / 1.6 x 11.0 mm

Accessories

96

Surgical and prosthetic accessories

t

REF 385-124-00 Positioning aid S for impression post S, closed

L 9.6 mm

REF 385-224-00 Positioning aid M for impression post M, closed

L 9.6 mm

REF 385-324-00 Positioning aid L for impression post L, closed

L 9.6 mm

REF 387-610-00Hex key ISO shank

SW 1.3 L 20.0 mm

REF 387-612-00Hex key ISO shank

SW 1.3 L 26.0 mm


SW 1.3 L 16.0 mm


SW 1.3 L 26.0 mm

REF 387-640-00Insertion key bar abutment – ratchet incl. screw

L 16.0 mm

REF 387-650-00Insertion key LOCATOR®

abutment – ratchetL 15.5 mm

REF 387-660-00Insertion key ball abutment – ratchet

L 15.0 mm

REF 387-670-00Insertion key Titanmagnetics® x-Line – ratchet

L 15.0 mm

REF 387-600-00Torque ratchet – scaled-down illustration –

15 – 50 Ncm

REF 387-602-00Sure-grip wheel – scaled-down illustration –

ø 18.0 mm

REF 387-604-00Locking key placement aid – scaled-down illustration –

SW 3.6 L 79.0 mm


Prosthetic accessories

t

REF 387-112-00 Polishing aid S

REF 387-212-00 Polishing aid M

REF 387-312-00 Polishing aid L

REF 387-116-00Ceramic abutment holder S, M – scaled-down illustration –

REF 387-316-00Ceramic abutment holder L – scaled-down illustration –

REF 330-831-00AnatomicHold – scaled-down illustration –

REF 387-720-00Milling cutter – bar abutment fit

REF 387-730-00Countersink – screw fit AnoTite screw – scaled-down illustration –

REF 330-821-00Reamer – screw channel AnoTite screw

REF 330-832-00 AnatomicTwist– scaled-down illustration –

REF 387-740-00 Torque key Unor Ecco 6 Ncm

REF 387-742-00Activator / deactivator Unor Ecco for inner matrix Au / Pt

REF 387-745-00 LOCATOR® instrument

REF 386-532-00LOCATOR® measurement guide

L 5.0 mm


L 8.0 mm

Accessories

97

Accessories

98

Training implants

t

REF 388-037-13 Training implant Mø 3.7 mm L 13.0 mm

REF 388-042-13 Training implant Mø 4.2 mm L 13.0 mm

t Abutment selection aid set

REF 388-400-00

Abutment selection aid setContents: · Abutment selection aid S · Abutment selection aid M · Abutment selection aid L · Testing sleeves S - M - L

Accessories

99

Service

t Comprehensive service 102 – 103

t Information materials 104 – 106Printed media 104 – 105Models 106

t Forms 107 – 109tioLogic© implant planning 107tioLogic© surgery protocol 108tioLogic© practice record card 109

t Treatment examples 110 – 117

100

101

ServiceService

The Logical Evolution

The implant system,

evaluated on the base of experience




tiologic© en

989-958-20_tioLogic_BasisF_0510.indd 1

17.05.2010 12:41:09 Uhr


The implant system, evaluated on the base of experience

The Logical EvolutionThe Logical EvolutionThe Logical Evolution

tiologic© en

989-958-20_tioLogic_BasisF_0510.indd 1 17.05.2010 12:41:09 Uhr

Service

102

Comprehensive serviceReliability for the user

More than just high quality implant components Competent advice and comprehensive information In implantology, success is based on competent exchange of knowledge and experience as well as

professional data management. Therefore, a comprehensive, high-quality range of services is Dentaurum Implants’ top priority. Be it during direct personal contact or through written communication. We live the philosophy “Quality before Quantity“.

989-963-20_SicherheitsPass_0607.1 1

25.05.2007 15:13:48 Uhr


The implant system,





tiologic en

103

Practically oriented courses and events Confident and effective use of products Dentaurum Implants offer a wide range of further education for beginners and advanced users. A group

of speakers of above average expertise guarantees the high quality of these courses. Here also, we apply “Quality before Quantity”.

t Nationally and Internationally experienced speakers t Consequential reference to practice and laboratory situations t Extensive hands-on and workshop phases t Regular user meetings and exchange of experience

Professional support in patient education More persuasive power for your scope of service Comprehensive patient counselling builds trust between patient and dentist. Especially for implant-borne

restorations, this is an important reason for the success of treatment. Dentaurum Implants therefore offer a compact scope of high-quality documents developed in close cooperation with experienced users.

104

www.dentaurum-implants.de

Service

t Printed media

General In implantology in particular, comprehensive, concise and significant information is indispensable. Therefore most of the informations around

the tioLogic© implant system are available both in digital and in traditional form. They are divided into basic, specific and informative documents for patient advice.

Basic user documentation The basic folder (REF 989-958-20) concisely presents fact on the most important tioLogic© components and their advantage to the user.

The Surgery Manual (REF 989-959-20) describes the complete process from diagnosis and implant insertion to impression taking. The Prosthetic Manual (REF 989-960-20) carries on where the Surgery Manual (REF 989-959-20) leaves off; describing various methods of prosthetic restoration through many diagrams and photos.

Specialised information The reliability and SafetyPass (REF 989-963-20) describes in detail tioLogic© safety concept, presenting the idea with tangible examples and

documenting the high standard of safety through extensive research results. Use the Implant Planning (REF 989-966-12) form to fill out all relevant planning details and transfer these to the dental laboratory for prosthetic planning. The Surgical Protocol (REF 989-966-02) contains all data specific to implant and insertion and surgery for each individual case. The Practice Record Card (REF 989-966-22) acts as a messenger between dental office and dental laboratory making for effective and rapid communication of all relevant implant and prosthetic data.

Documentation for personal consultancy This specialised communicative medium is designed for use in personal patient consultancy. It acts as a guideline and explains the principle behind

implant treatment in a clear and comprehensible manner.

Patient Information Extensive patient advice and education builds trust in the clinician and is an important premise for the success of treatment. Dentaurum Implants

offer a compact range of high-quality materials developed in close cooperation with experienced users.

For more informations please visit our web-site www.dentaurum-implants.de


The implant system,





tiologic© en

989-958-20_tioLogic_BasisF_0510.indd 1

17.05.2010 12:41:09 Uhr

989-963-20_SicherheitsPass_1109.indd 1

24.11.2009 10:46:24 Uhr

Standard treatmentA bridge. Neighbouring teeth serve as abutments.

Implant treatmentImplants are anchored in bone and support the crown.

Advantages:Fixed restoration, very pleasant aesthetics.

Disadvantages:Healthy neighbouring teeth must be ground and prepared. After the bridge has been fitted, much effort is required for treating the abutments.

Advantages:Fixed restoration, very pleasant aesthetics, no loss of hard tissue from neighbouring teeth.

Disadvantages:None

The missing toothOne or more teeth are missing within a row of teeth.

Example: Single tooth gap

Teeth prepared for fitting the bridge

Implants before the crown is fitted

Fitted bridge Fitted implant-borne crown

The missing toothThe missing tooth

Standard treatmentThe clasp-retained denture.Neighbouring and opposite teeth are used as anchors for the denture clasps.

ImplantsImplants are anchored in bone and support the bridge.

Advantages:Low-cost treatment.

Disadvantages:Removable restoration.Clasps are usually visible.Bothersome metal bar in the mouth.Uncomfortable to wear.Can be prone to repairs.

Advantages:Fixed restoration, very pleasant aesthetics, no loss of hard tissue from the neighbouring teeth.No bothersome attachments. Long-lasting.

Disadvantages:None

Missing rear teethOne or more teeth are missing at the end of a row of teeth.

Example: Free-end situation

Clasp-retained denture before fitting

Implant-borne bridge before fitting

Fitted clasp-retained denture Fitted implant-borne bridge

Standard treatmentThe full denture.

Restoration with implantsImplants are anchored in bone and support the denture.

Advantages:Low-cost treatment.

Disadvantages:The denture often doesn’t fit accurately. The gum of the upper jaw is covered completely, which may lead to taste impairment.

Advantages:Securely fixed restoration, very good aesthetics. The upper jaw’s gum remains exposed and the sense of taste unimpaired.

Disadvantages:None

Loss of all teethAll the teeth are missing from the jaw.

Example: Edentulous jaw

Full denture before fitting Implants with bar before fitting of the denture

Fitted full denture Fitted implant-borne denture

dental implants – genuine quality of life!

www.dentaurum-implants.dewww.dentaurum-implants.de

989-185-02_Einsatz_Implantate_0907.indd 2 29.08.2007 16:14:32 Uhr

Service

Printed media

t tioLogic© Information for users

REF 903-944-70 tioLogic© DVD (multilingual)

REF 989-958-20 tioLogic© Implantatsystem, folder basic information

REF 989-623-20 tioLogic© easyClean, folder

REF 989-608-20 tioLogic© pOsition, folder

REF 989-999-20 tioLogic© pOsition Surgery manual

REF 989-959-20 tioLogic© Surgery manual

REF 989-960-20 tioLogic© Prosthetic manual

REF 989-965-20 tioLogic© Produkt catalogue

REF 989-963-20 tioLogic© Safty pass

REF 989-966-02 tioLogic© Surgery protocol

REF 989-966-12 tioLogic© Implantplanning

REF 989-966-22 tioLogic© Practice record card

REF 989-187-20 Components of the tioLogic© surgical tray (laminated)

REF 989-190-20 Components assortment, insertion procedure (laminated)

t tioLogic© Information for patients

REF 989-996-20 tioLogic© Patient information

REF 989-961-20 tioLogic© Patient pass

REF 989-185-02 tioLogic© Examples for use (10x)

t tioLogic© Information for users

REF 989-700-93 Poster „tioLogic© Art“

105

106

Models

t Demonstration models

REF 388-420-00 Demo implant M Scale 5:1

REF 388-422-00 Demo closure screw M Scale 5:1

REF 388-424-00Demo gingiva former conical M GH 3.0 mm

Scale 5:1

REF 388-438-00Demo impression post with screw M, open

Scale 5:1

REF 388-430-00 Demo laboratory implant M Scale 5:1

REF 388-432-00Demo titanium abutment M GH 2.5 mm, with AnoTite screw

Scale 5:1

REF 388-442-00Demo acrylic block M, titanium equipped

Scale 5:1

REF 388-448-00Demo acrylic block M, equipped

Scale 5:1

REF 388-410-00Demo modell acrylic upper jaw, partially toothed 4 implants, without prosthetic

Scale 5:1

107

Service

Forms

t Implant Planning (REF 989-966-12)

989-

966-

en

Prin

ted

by D

enta

urum

G

erm

any

06

/07

tioLogic© implant planning en

Turnstraße 31 · 75228 Ispringen · Germany · Telephone + 49 72 31 / 803-0 · Fax + 49 72 31 / 803-295www.dentaurum-implants.de · E-Mail: [email protected]

Date of issue:

Patient: Practice:

First name:

Surname:

Date of birth:

Planned prosthetic restoration:

cement-retained / screw-retained removable

Single restoration BridgeworkResilient bar /

Bar attachmentMilled bar Telescope Ball attachment Locator® Magnet

E B S G T K L M

Planned implant position / Type of implant:

18 17 16 15 14 13 12 11 21 22 23 24 25 26 27 28

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

LImplant

dimensions1

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

LImplant

dimensions1

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

48 47 46 45 44 43 42 41 31 32 33 34 35 36 37 38

1 Implant dimensions / Series of abutments (S - M - L concept):

Implant length 9.0 / 11.0 / 13.0 / 15.0 / 17.0 mm

Implant diameter 3.3 mm 3.7 mm 4.2 mm 4.8 mm 5.5 mm

Series of abutments S M L

All components are marked with the relevant series of abutment S, M or L. The 3.3 mm ø implants are not available in a 9.0 mm length; the 5.5 mm ø implants are not available in a 17.0 mm length

Pack contents practice / laboratory:

Pack contents practice: Pack contents dental laboratory:

Impressions for working models ❏ Surgical stent ❏

Impressions for situation models ❏ Temporary restoration ❏

Photographs ❏ Quote ❏

Bite registration ❏ Other

Tooth shade ❏

Comments:

Custom tray Stock tray Model Bite Restoration Articulator Facebow Photo Finish

Upper Upper Upper Upper

Lower Lower Lower Lower

Call back request

Impla

nt P

lannin

g

freigegeben – aber noch nicht gedruckt.M/W-dho, 18.6.07

Service

108

Forms

t Surgical Protocol (REF 989-966-02) - only PDF-Version

989-

966-

02

Prin

ted

by D

enta

urum

G

erm

any

06

/07

tioLogic© surgical protocol en


Date of issue:

Patient: Practice:

First name:

Surname:

Date of birth:

Insurance company:

Implant location:

18 17 16 15 14 13 12 11 21 22 23 24 25 26 27 28

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

Implant dimensions1

(label)After implant placement

the adhesive labels included in the implant packaging can be used

for documentation.

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

Implant dimensions1



for documentation.

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

48 47 46 45 44 43 42 41 31 32 33 34 35 36 37 38

Dates of implant treatment:

Operator

Medication Preoperative ❏ Postoperative ❏

Anaesthesia / Quantity Block anaesthesia ❏ Infi ltration anaesthesia ❏

Bone quality ❏ D1 (dense compact bone) ❏ D3 (thin, porous compact bone / open meshed spongiosa)

❏ D2 (porous compact bone / dense spongiosa) ❏ D4 (virtually no compact bone / open meshed spongiosa)

Augmentation / Augmentation material ❏

Sinus lift / Augmentation material ❏

Bone graft / Harvest site ❏

Membrane ❏

Bone Condensing ❏

Bone Spreading ❏

Other ❏

Complications:

❏ Maxillary sinus perforation ❏ Mandibular canal damage ❏ Wound infection Other:

❏ Nasal cavity perforation ❏ Adjacent structure damage ❏ Suture dehiscence


Implant length 9 / 11 / 13 / 15 / 17 mm



All components are marked with the relevant series of abutment S, M or L. The 3.3 mm ø implants are not available in a 9.0 mm length; the 5.5 mm ø implants are not available in a 17.0 mm length.

Comments:

Surg

ical P

roto

col


109

Service

Forms

t Practice Record Card (REF 989-966-22) - only PDF-Version

tioLogic© practice record card en


Date of issue:

Patient:

First name:

Surname:

Date of birth:

Practice: Dental laboratory:

Technician:

Date received:

Date sent: Date sent:

Implant location:

18 17 16 15 14 13 12 11 21 22 23 24 25 26 27 28

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

Implant dimensions1



for documentation.

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

Abutment(Refer to label for description)

Prosthetic restoration2

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

Implant dimensions1



for documentation.

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

ø

L

Abutment(Refer to label for description)

Prosthetic restoration2

48 47 46 45 44 43 42 41 31 32 33 34 35 36 37 38


Implant length 9.0 / 11.0 / 13.0 / 15.0 / 17.0 mm



All components are marked with the relevant series of abutment S, M or L. The 3.3 mm ø implants are not available in a 9.0 mm length; the 5.5 mm ø implants are not available in a 17.0 mm length.

2 Prosthetic restoration:

cement-retained / screw-retained removable

Single restoration BridgeworkResilient bar /

Bar attachmentMilled bar Telescope Ball attachment Locator® Magnet

E B S G T K L M

Material information:

Alloy: ❏ Adhesive: ❏ Ceramic: ❏

Solder: ❏ Acrylic: ❏ Tooth shade: ❏

Pra

ctice R

eco

rd C

ard

989-

966-

22

Prin

ted

by D

enta

urum

G

erm

any

06

/07


Service

110

Treatment examples

t Single crown, cemented, closed impression, ceramic abutment, angulate 15°

Description Illustration Place Number

tioLogic© implant Practice 1

Gingiva former Practice 1

Impression post, closed Practice 1

Laboratory implant Laboratory 1

Ceramic abutment, 15° Laboratory 1

t Single crown, cemented, open impression, ceramic abutment




Impression post, open Practice 1


Ceramic abutment Laboratory 1

Treatment examples

t Single crown, cemented, closed impression, titanium abutment, angulate 20°




Impression post, closed Practice 1


Titanium abutment, 20° Laboratory 1

t Single crown, cemented, open impression, titanium abutment






Titanium abutment, straight Laboratory 1

111

Service

112

Treatment examples

t Single crown, screw-retained occlusally, open impression, precious metal abutment






Precious metal abutment Laboratory 1

t Temporary restoration, Provisional titanium cab, bar



Bar abutment Practice 4

Provisional titanium cab, bar Practice 4

Treatment examples

t Bar restoration, open impression, prefabricated titanium bar






Bar abutment Laboratory 2

Titanium cap bar Laboratory 2

Resilient bar macro rematitan® Laboratory 1

t Bar immediate restoration, impression over bar abutment, prefabricated titanium bar



Bar abutment Practice 2

Closure screw bar Practice 2

Impression post bar Practice 2

Laboratory implant bar Laboratory 2

Titanium cap bar Laboratory 2

Resilient bar macro rematitan® Laboratory 1

113

Service

114

Treatment examples

t Bar restoration, open impression, milled bar







Plastic cap bar Laboratory 2

Resilient bar macro plastic Laboratory 1

t Bar restoration, open impression, titanium caps for the adhesive technique







Titanium cap bar, adhesive technique

Laboratory 3

Precious metal cap bar Laboratory 1

Resilient bar macro plastic Laboratory 1

Treatment examples

t Telescopic restoration, open impression, precious metal abutment



Gingivaformer Practice 4



Precious metal abutment Laboratory 4

t Ball abutment restoration, impression over the ball abutment, polymerization into existing denture



Ball abutment Practice 2

Matrix Ti / Plastic Practice 2

115

Treatment examples

t Ball abutment restoration, open impression, denture remake






Ball abutment Laboratory 2

Matrix Ti / Plastic Laboratory 2

t LOCATOR® restoration, impression over the LOCATOR® abutment



LOCATOR® abutment Practice 2

LOCATOR® impression cap Practice 2

LOCATOR® laboratory implant Laboratory 2

LOCATOR® matrix Laboratory 2

Service

116

117

Treatment examples

t Magnet restoration, impression over Titanmagnetics® insert x-Line



Steco Titanmagnetics® insert Practice 2

Steco impression post x-Line Practice 2

Steco Titanmagnetics® laboratory implant x-Line

Laboratory 2

Steco Titanmagnetics® denture magnet x-Line

Laboratory 2

Technical data

t Material data 120 – 121

t Quality system 122 – 123

118

Technical data

119

Tech

nic

al

da

ta

Material data

t Chemical composition

Zirconia dioxide Polycrystalline tetragonal zirconium

Physical and mechanical properties

Density 6.05 g / cm3

Porosity, open 0 %

Particle size 0.5 µm

Flexural strength 1.600 MPa

WAK 10 x 10-6 1 / k

Chemical composition (% mass)

Y2O3 4.5 % – 5.4 %

HfO2 < 2 %

Al2O3 < 0.5 %

other oxides < 0.5 %

ZrO2 Rest

Pure titanium grade 4 Physical and mechanical properties (solution heat treated)

Density 4.5 g / cm3

0.2 % proof stress 390 MPa min

Tensile strength 540 MPa min

Elongation at rupture 16 % min.

Modulus of elasticity 110 GPa


O 0.4 % max.

Fe 0.3 % max.

C 0.1 % max.

N 0.05 % max.

H 0.013 % max.

Ti Rest

Titanium alloy TiAl6V4 titanium grade 5 (ASTM)


Density 4.6 g / cm3

0.2 % proof stress 870 MPa

Tensile strength 920 MPa

Elongation at rupture 8 %



AI 5.5 % – 6.75 %

V 3.5 % – 4.5 %

Fe 0.3 % max.

C 0.08 % max.

N 0.05 % max.

H 0.015 % max.

O 0.2% max.

Ti Rest

Technical data

120

Material data

t Chemical composition

Precious metal alloy Cast on precious metal alloy


Density 17.5 g / cm3

Weight

Precious metal abutment S 0.307 g

Precious metal abutment M 0.359 g

Precious metal abutment L 0.482 g

Precious metal cap bar 0.260 g

Liquidus temperature 1.490 °C/ 2.714 °F

Solidus temperature 1.400 °C/ 2.552 °F


Hardness 145 (w) / 240 (a) HV5

0.2 % proof stress 370 (w) / 610 (a) MPa

Elongation at rupture 18 (w) / 17 (a) %

Tensile strength 560 (w) / 770 (a) MPa

WAK 12.5 x 10-6 1 / k

Chemical composition (% mass) Au 60 %

Pt 19 %

Pd 20 %

Ir 1 %

PEEK Thermoplastic high-performance polymer


Colour White

Yield strength 95 MPa

Elongation >25 %

Modulus of elasticity (flexion) 4.2 GPa

Operating temperature260 °C / 300 °C (500 °F / 572 °F) (continuous / temporary)

Chemical composition

Polyether ether keton

Titanium magnets Housing Pure titanium grade 4

Magnet core Permanent magnet (Sm2Co17)

Magnet core welded gastight in housing

121

Quality system

t Quality assurance for the user and patient

Dentaurum Implants has over 10 years’ experience in implantology, while its parent company Dentaurum can look back on more than 120 years’ experience in prosthetic dentistry. This solid foundation ensured that development was based on a wealth of experience with the focus on the user and high-quality production of the tioLogic© implant system.

In all its business activities Dentaurum Implants GmbH, like the parent company Dentaurum, meets the requirements of the international quality management standards:

• DINENISO9001:2000QualityManagementSystems

• DINENISO13485MedicalDevices–QualityManagementSystems

The term “quality management” covers systematic planning, implementation and documentation of all activities that have an influence on the quality of a product before, during and after its manufacture. The focus is not therefore solely on the final inspection of a product but on continuous quality control during development of the product, from raw material to manufacture right through to storage and sale. The above standards define in detail the criteria for ensuring comprehensive quality assurance by a company for all its operating procedures.

Based on this quality management system Dentaurum Implants guarantees traceability and that the quality of the products and services will meet the expectations of the customers and patients. The products fulfill the fundamental requirements of medical products in terms of product performance and patient safety as defined in European laws and directives. As the respective products of Dentaurum Implants GmbH meet the requirements of the European Directive 93/42/EEC for medical products, they carry the CE mark.

t Eco-management system

The eco-management system and the quality management system are integrated in the Dentaurum Group management system. The eco-management system is implemented by the Management System Working Group, which is made up of members representing eco-protection, hazardous goods safety, health and safety, material science and quality management.

Scope of validation

The eco-policy, eco-management system, eco-programme, eco-audit completed, eco-audit scheme and the basic environmental statement of Dentaurum, J.P. Winkelstroeter KG and Dentaurum Implants GmbH, Ispringen, Turnstraße 31, Germany, fully comply with the standards and requirements of the Regulation (EEC) No. 761/2001 (EMAS II).

Technical data

122

Aesthetics

HandlingReliability

123

Index

124

t C Ceramic abutments S ..........................................................................61 S, 15° ..................................................................61 M ........................................................................69 M, 15° .................................................................69 L ..........................................................................77 L, 15° ..................................................................77 Closure screw bar .......................................62, 70, 78 Conical formers brown S ø 3.3 mm, L 11.0 mm ...............35, 39, 41 brown S ø 3.3 mm, L 13.0 mm ...............35, 39, 41 brown S ø 3.3 mm, L 15.0 mm ...............35, 39, 41 brown S ø 3.3 mm, L 17.0 mm ...............35, 39, 41 yellow M ø 3.7 mm, L 9.0 mm ................35, 39, 41 yellow M ø 3.7 mm, L 11.0 mm ...............35, 39, 41 yellow M ø 3.7 mm, L 13.0 mm ..............35, 39, 41 yellow M ø 3.7 mm, L 15.0 mm ..............35, 39, 41 yellow M ø 3.7 mm, L 17.0 mm ..............35, 39, 41 red M ø 4.2 mm, L 9.0 mm .....................35, 39, 41 red M ø 4.2 mm, L 11.0 mm ...................35, 39, 41 red M ø 4.2 mm, L 13.0 mm ...................35, 39, 41 red M ø 4.2 mm, L 15.0 mm ...................35, 39, 41 red M ø 4.2 mm, L 17.0 mm ...................35, 39, 41 blue L ø 4.8 mm, L 9.0 mm .....................35, 39, 41 blue L ø 4.8 mm, L 11.0 mm ...................35, 39, 41 blue L ø 4.8 mm, L 13.0 mm ...................35, 39, 41 blue L ø 4.8 mm, L 15.0 mm ...................35, 39, 41 blue L ø 4.8 mm, L 17.0 mm ...................35, 39, 41 green L ø 5.5 mm, L 9.0 mm ...................35, 39, 41 green L ø 5.5 mm, L 11.0 mm .................35, 39, 41 green L ø 5.5 mm, L 13.0 mm .................35, 39, 41 green L ø 5.5 mm, L 15.0 mm .................35, 39, 41 Conical formers (dense bone) brown S ø 3.3 mm, L 17.00 mm ..............36, 39, 41 yellow M ø 3.7 mm, L 17.0 mm ...............36, 39, 41 red M ø 4.2 mm, L 17.0 mm ....................36, 39, 41 blue L ø 4.8 mm, L 17.0 mm ....................36, 39, 41 green L ø 5.5 mm, L 17.0 mm..................36, 39, 41 Countersink – screw fit AnoTite prosthetic screw......................................87

t D Demonstration- Acrylic block M, full .............................................96 Closure screw M, 5:1 ...........................................96 Gingiva former conical M, GH 3.0 mm, 5:1 ..........96 Implant M, 5:1 .....................................................96 Impression post with screw M, open, 5:1 .............96 Laboratory implant M, 5:1 ...................................96 Titanium abutment M, GH 2.5 mm, screw 5:1 .....96 Dental mirror ..........................................................49 Dental probe ...........................................................49 Dental tweezers ......................................................49 Depth drills, ø 2.0 mm, L 9.0 mm ................................34, 39, 41 ø 2.0 mm, L 11.0 mm ..............................34, 39, 41 ø 2.0 mm, L 13.0 mm ..............................34, 39, 41 ø 2.0 mm, L 15.0 mm ..............................34, 39, 41 ø 2.0 mm, L 17.0 mm ..............................34, 39, 41

Alphabetical

t A Abutment selection aid set ......................................88 Adapter – ISO shank / ratchet .......................41, 43, 84 Activator / deactivator Unor Ecco ..............................87 AnatomicHold .........................................................87 AnatomicTwist ........................................................87 AnoTite screw M 1.6. L 9.0 mm ......................................61, 69, 77 AnoTite screw bar abutment M 1.6. L 6.0 mm ......................................62, 70, 78

t B Ball abutments S, GH 1.5 mm ......................................................64 S, GH 3.0 mm ......................................................64 S, GH 4.5 mm ......................................................64 M, GH 1.5 mm ....................................................72 M, GH 3.0 mm ....................................................72 M, GH 4.5 mm ....................................................72 L, GH 1.5 mm ......................................................80 L, GH 3.0 mm ......................................................80 L, GH 4.5 mm ......................................................80 Ball-end plugger ......................................................49 Ball laboratory implant ................................64, 72, 80 Bar abutments S, GH 1.0 mm ......................................................62 S, GH 2.5 mm ......................................................62 S, GH 4.0 mm ......................................................62 S, GH 5.5 mm ......................................................62 M, GH 1.0 mm ....................................................70 M, GH 2.5 mm ....................................................70 M, GH 4.0 mm ....................................................70 M, GH 5.5 mm ....................................................70 L, GH 1.0 mm ......................................................78 L, GH 2.5 mm ......................................................78 L, GH 4.0 mm ......................................................78 L, GH 5.5 mm ......................................................78 Bar rider Au / Pt, milled ................................62, 70, 78 Bar rider and retention, rematitan®, macro ....................................62, 70, 78 Bite registration caps S ..........................................................................60 M ........................................................................68 L ..........................................................................76 Bone Screws titanium 1.0 x 2.0 mm .......................................................85 1.0 x 3.0 mm .......................................................85 1.0 x 4.0 mm .......................................................85 1.0 x 5.0 mm .......................................................85 1.2 x 3.0 mm .......................................................85 1.5 x 7.0 mm .......................................................85 1.5 x 9.0 mm .......................................................85 1.5 x 11.0 mm .....................................................85

Double retractor ......................................................49 Drill block ................................................................49 Drill extension – ISO shank ....................39, 41, 43, 84 Drills for guide sleeves (laboratory) ø shank 2.35 mm ....................................................31

t E easyClean surgical tray (full) ....................................38 easyClean surgical tray (without content) ................38

t G Gingiva formers S, conical, GH 1.5 mm .........................................52 S, conical, GH 3.0 mm .........................................52 S, conical, GH 4.5 mm .........................................52 S, conical, GH 6.0 mm .........................................52 S, cylindrical, GH 1.5 mm .....................................53 S, cylindrical, GH 3.0 mm .....................................53 S, cylindrical, GH 4.5 mm .....................................53 S, cylindrical, GH 6.0 mm .....................................53 M, conical, GH 1.5 mm ........................................52 M, conical, GH 3.0 mm ........................................52 M, conical, GH 4.5 mm ........................................52 M, conical, GH 6.0 mm ........................................52 M, cylindrical, GH 1.5 mm ...................................53 M, cylindrical, GH 3.0 mm ...................................53 M, cylindrical, GH 4.5 mm ...................................53 M, cylindrical, GH 6.0 mm ...................................53 L, conical, GH 1.5 mm .........................................52 L, conical, GH 3.0 mm .........................................52 L, conical, GH 4.5 mm .........................................52 L, conical, GH 6.0 mm .........................................52 L, cylindrical, GH 1.5 mm .....................................53 L, cylindrical, GH 3.0 mm .....................................53 L, cylindrical, GH 4.5 mm .....................................53 L, cylindrical, GH 6.0 mm .....................................53 Graft material dish ..................................................49 Guide sleeves titanium, L 6.0 mm (inner ø 2.0 mm) ..................................31 L 10.0 mm (inner ø 2.0 mm) ................................31

t H Hex keys SW 1.3 – ISO shank, L 20 mm ...........................39, 41, 43, 86 ISO shank, L 26 mm ...........................39, 41, 43, 86 Ratchet, L 16 mm ..............................39, 41, 43, 86 Ratchet, L 26 mm ..............................39, 41, 43, 86 Holder ceramic abutment S, M, ..................................................................87 L ..........................................................................87

t I

125

Implants brown S ø 3.3 mm, L 11.0 mm ...........................51 brown S ø 3.3 mm, L 13.0 mm ...........................51 brown S ø 3.3 mm, L 15.0 mm ...........................51 brown S ø 3.3 mm, L 17.0 mm ............................51 yellow M ø 3.7 mm, L 9.0 mm ............................51 yellow M ø 3.7 mm, L 11.0 mm ..........................51 yellow M ø 3.7 mm, L 13.0 mm ..........................51 yellow M ø 3.7 mm, L 15.0 mm ..........................51 yellow M ø 3.7 mm, L 17.0 mm ..........................51 red M ø 4.2 mm, L 9.0 mm .................................51 red M ø 4.2 mm, L 11.0 mm ...............................51 red M ø 4.2 mm, L 13.0 mm ...............................51 red M ø 4.2 mm, L 15.0 mm ...............................51 red M ø 4.2 mm, L 17.0 mm ...............................51 blue L ø 4.8 mm, L 9.0 mm .................................51 blue L ø 4.8 mm, L 11.0 mm ...............................51 blue L ø 4.8 mm, L 13.0 mm ................................51 blue L ø 4.8 mm, L 15.0 mm ...............................51 blue L ø 4.8 mm, L 17.0 mm ...............................51 green L ø 5.5 mm, L 9.0 mm ...............................51 green L ø 5.5 mm, L 11.0 mm .............................51 green L ø 5.5 mm, L 13.0 mm .............................51 green L ø 5.5 mm, L 15.0 mm .............................51 Impression caps S ..........................................................................60 M ........................................................................68 L ..........................................................................76 Impression posts S, open, L 10.0 mm .............................................60 S, open, L 14.0 mm .............................................60 S, closed, L 7.0 mm .............................................60 M, open, L 10.0 mm ............................................68 M, open, L 14.0 mm ............................................68 M, closed, L 7.0 mm ............................................68 L, open, L 10.0 mm .............................................76 L, open, L 14.0 mm .............................................76 L, closed, L 7.0 mm ..............................................76 Bar ..........................................................62, 70, 78 Indicator tag with adhesive backing...................38, 40 Inner matrix Unor Ecco Au / Pt, standard ..................................................64, 72, 80 high .........................................................64, 72, 80 Inner matrix Unor Ecco Ti / Plastic green, standard .......................................64, 72, 80 red, high ..................................................64, 72, 80 yellow, low ..............................................64, 72, 80 Hex keys implant SW 2.5 – ISO shank, L 19.0 mm ........................39, 41, 43, 84 ISO shank, L 25.0 mm ........................39, 41, 43, 84 Ratchet, L 8.0 mm .............................39, 41, 43, 84 Ratchet, L 13.0 mm ...........................39, 41, 43, 84 Ratchet, L 23.0 mm ...........................39, 41, 43, 84 Insertion key Ball abutment – ratchet......................39, 41, 43, 86 Bar abutment – ratchet ......................39, 41, 43, 86 LOCATOR® abutment – ratchet ............................86 Titanmagnetics® x-Line – ratchet .........................86 Instrument tray .......................................................42

t L

Index

126

Needle holder .........................................................49

t O Osteotome trays Surgical hammer ..................................................46 Bone chisel 4.0 mm .......................................45, 46 Bone chisel 6.0 mm .......................................45, 46 Tray .....................................................................44 OsteotomicHold .............................................45, 46 Osteotome, concave, straight, 2.4 mm.................46 Osteotome, concave, straight, 3.1 mm.................46 Osteotome, concave, straight, 3.7 mm.................46 Osteotome, concave, straight, 4.2 mm.................46 Osteotome, concave, angled, 2.4 mm ..................46 Osteotome, concave, angled, 3.1 mm ..................46 Osteotome, concave, angled, 3.7 mm ..................46 Osteotome, concave, angled, 4.2 mm ..................46 Osteotome, convex, straight, 2.4 mm ............45, 46 Osteotome, convex, straight, 3.1 mm ............45, 46 Osteotome, convex, straight, 3.7 mm ............45, 46 Osteotome, convex, straight, 4.2 mm ............45, 46 Osteotome, convex, angled, 2.4 mm..............45, 46 Osteotome, convex, angled, 3.1 mm..............45, 46 Osteotome, convex, angled, 3.7 mm..............45, 46 Osteotome, convex, angled, 4.2 mm..............45, 46

t P Paralleling pin ø 1.4 / 2.0 mm, L 9.0 mm ...................39, 41, 43, 84 Periodontal measuring probe...................................49 Pilot drill, ø 1.4 mm, L 17.0 mm without stop ........................................................34 Placement aid S, M, L ............................39, 41, 43, 84 Plastic cap bar .............................................62, 70, 78 Polishing aids S ..........................................................................87 M ........................................................................87 L ..........................................................................87 Precious metal abutment S, cast on .............................................................61 M, cast on ...........................................................69 L, cast on .............................................................77 Precious metal cap bar ................................62, 70, 78 Pre-Drill L 17.0 mm for guide sleeve L 6.0 mm ....................................31 Pre-Drill L 21.0 mm for guide sleeve L 10.0 mm ..................................31 Pre-Drills, 0.7 x 3.5 mm .......................................................85 1.1 x 7.0 mm .......................................................85 1.1 / 1.6 x 11.0 mm ..............................................85 Prosthetic screw Titanium .....................................................61, 69, 77 bar, Titanium ..............................................62, 70, 78 PTFE filter ..........................................................38, 40

t R Raspatories,

Laboratory implants S ..........................................................................60 M ........................................................................68 L ..........................................................................76 Bar ..........................................................62, 70, 78 La Grange scissors ...................................................49 LOCATOR® Impression caps .......................................63, 71, 79 Abutments S, GH 1.0 mm ....................................63 Abutments S, GH 2.0 mm ....................................63 Abutments S, GH 3.0 mm ....................................63 Abutments S, GH 4.0 mm ....................................63 Abutments S, GH 5.0 mm ....................................63 Abutments M, GH 1.0 mm ..................................71 Abutments M, GH 2.0 mm ..................................71 Abutments M, GH 3.0 mm ..................................71 Abutments M, GH 4.0 mm ..................................71 Abutments M, GH 5.0 mm ..................................71 Abutments L, GH 1.0 mm ....................................79 Abutments L, GH 2.0 mm ....................................79 Abutments L, GH 3.0 mm ....................................79 Abutments L, GH 4.0 mm ....................................79 Abutments L, GH 5.0 mm ....................................79 denture cap .............................................63, 71, 79 Laboratory implants .................................63, 71, 79 Matrices (black, transparent, pink, blue) ...63, 71, 79 LOCATOR® instrument ............................................87 LOCATOR® retention inserts blue (very low) .........................................63, 71, 79 green (extended angulation) ..........................71, 79 pink (low) ................................................63, 71, 79 red (extended angulation) ..............................71, 79 transparent (medium) ..............................63, 71, 79 LOCATOR®

processing insert ......................................63, 71, 79 Measurement guide .............................................87 Parallel post .......................................63, 71, 79, 87 Locking key placement aid ....................39, 41, 43, 86

t M Material tabs ...........................................................84 Matrices Unor Ecco AU-PT (standard) .....................................64, 72, 80 TI / Plastic (green, standard) ......................64, 72, 80 TI / Plastic (red, high) .................................64, 72, 80 Micro-scissors ..........................................................49 Milling cutter – bar abutment fit..............................87

t N NanoBone® granulates, Granule size 0.6 x 2.0 mm, 1 x 0.6 ml ..................50 Granule size 0.6 x 2.0 mm, 5 x 0.6 ml ..................50 Granule size 0.6 x 2.0 mm, 1 x 1.2 ml ..................50 Granule size 0.6 x 2.0 mm, 5 x 1.2 ml ..................50 Granule size 0.6 x 2.0 mm, 1 x 2.4 ml ..................50 Granule size 0.6 x 2.0 mm, 5 x 2.4 ml ..................50 Granule size 1.0 x 2.0 mm, 1 x 1.2 ml ..................50 Granule size 1.0 x 2.0 mm, 5 x 1.2 ml ..................50 Granule size 1.0 x 2.0 mm, 1 x 2.4 ml ..................50 Granule size 1.0 x 2.0 mm, 5 x 2.4 ml ..................50

broad .................................................................49 narrow ................................................................49 Reamer – screw channel AnoTite prosthetic screw......................................87 Resilient bars plastic, macro ..........................................62, 70, 78 rematitan®, macro ....................................62, 70, 78 Round bur, ø 1.8 mm ..................................34, 39, 41

t S Scan abutment ............................................60, 68, 70 Scraper ...................................................................49 Screwdriver Handle .................................................85 Screwdriver square tip for screw ø 1.0 / 1.2 mm ......................................85 for screw ø 1.5 mm .............................................85 Screw impression post bar ...........................62, 70, 78 Screws impression post, open, for L 10.0 mm ................................60, 68, 76 open, for L 14.0 mm ................................60, 68, 76 Screw temporary abutment .........................60, 68, 76 Sharp curette ..........................................................49 Silicone o-ring ...........................38, 39, 40, 41, 43, 86 Steco dentures-Titanmagnetics® x-Line ........65, 73, 81 Steco positioning sleeves x-Line (subgingival) ..................................65, 73, 81 x-Line (supragingival) ...............................65, 73, 81 Steco Titanmagnetics® Impression post x-Line..............................65, 73, 81 Laboratory implant x-Line.........................65, 73, 81 Steco Titanmagnetics® inserts S, x-Line, GH 3.0 mm ...........................................65 S, x-Line, GH 4.5 mm ...........................................65 M, x-Line, GH 3.0 mm .........................................73 M, x-Line, GH 4.5 mm .........................................73 L, x-Line, GH 3.0 mm ...........................................81 L, x-Line, GH 4.5 mm ...........................................81 Surface cutters brown S ø 3.3 mm ..................................18, 34, 39 yellow M ø 3.7 mm ................................20, 34, 39 red M ø 4.2 mm .....................................22, 34, 39 blue L ø 4.8 mm ....................................24, 34, 39 green L ø 5.5 mm ...................................26, 34, 39 Sure-grip wheel .....................................39, 41, 43, 86 Surgical tray ............................................................40

t T Temporary abutments S, GH 3.0 mm ......................................................60 M, GH 3.0 mm ....................................................68 L, GH 3.0 mm ......................................................76 Thread taps brown S ø 3.3 mm ..................................36, 39, 41 yellow M ø 3.7 mm ................................36, 39, 41 red M ø 4.2 mm .....................................36, 39, 41 blue L ø 4.8 mm .....................................36, 39, 41 green L ø 5.5 mm ...................................36, 39, 41 TIOSET® tray ............................................................48 Tissue forceps .........................................................49 Titanium abutments

127

S, adjustable, GH 2.5 mm ....................................61 M, adjustable, GH 2.5 mm ...................................69 L, adjustable, GH 2.5 mm ....................................77 S, GH 1.0 mm ......................................................61 S, GH 2.5 mm ......................................................61 S, GH 4.0 mm ......................................................61 S, GH 1.5 mm, 15° ..............................................61 S, GH 3.0 mm, 15° ..............................................61 M, GH 1.0 mm ....................................................69 M, GH 2.5 mm ....................................................69 M, GH 4.0 mm ....................................................69 M, GH 1.5 mm, 20° .............................................69 M, GH 3.0 mm, 20° .............................................69 L, GH 1.0 mm ......................................................77 L, GH 2.5 mm ......................................................77 L, GH 4.0 mm ......................................................77 L, GH 1.5 mm, 20° ..............................................77 L, GH 3.0 mm, 20° ..............................................77 Titanium bases Ceramic abutment S ............................................61 Ceramic abutment M ...........................................69 Ceramic abutment L ............................................77 Titanium cap bar .........................................62, 70, 78 Titanium cap bar, adhesive technique ..........62, 70, 78 Titanium Mesh, 20.0 x 10.0 x 0.2 mm ..........................................85 25.0 x 15.0 x 0.2 mm ..........................................85 30.0 x 30.0 x 0.2 mm ..........................................85 Torque key Unor Ecco .............................................87 Torque ratchet ......................................39, 41, 43, 86 Training implants yellow (M) ø 3.7 mm, L 13.0 mm ........................88 red (M) ø 4.2 mm, L 13.0 mm .............................88

t W Wire Cutters ...........................................................85

t X X-ray reference sphere ø 5.0 mm ............................................................31 X-ray templates Scale 1:1 / 1.25:1 ..................................................30 Scale 1:1 / 1.4:1 ....................................................30

Index

128

360-410-00 .................................................................101360-500-00 .................................................................101360-501-00 .................................................................101360-502-00 .................................................................101360-600-00 ...................................................................66360-602-00 ...................................................................66360-604-00 ...................................................................66360-606-00 ...................................................................66360-608-00 ...................................................................66360-610-00 ...................................................................66360-612-00 ...................................................................66360-614-00 ...................................................................66360-616-00 ...................................................................66360-618-00 ...................................................................66360-622-00 ...................................................................66381-133-00 ...................................................................46381-137-00 ...................................................................46381-142-00 ...................................................................46381-148-00 ...................................................................46381-155-00 ...................................................................46381-233-00 ...................................................................46381-237-00 ...................................................................46381-242-00 ...................................................................46381-248-00 ...................................................................46381-255-00 ...................................................................46381-333-00 .............................................................47, 57381-337-00 .............................................................47, 57381-342-00 .............................................................47, 57381-348-00 .............................................................47, 57381-355-00 .............................................................47, 57381-410-00 ...................................................................34381-412-00 ...................................................................34381-420-00 ...................................................................35381-422-00 ...................................................................35381-424-00 ...................................................................35381-426-00 ...................................................................35381-428-00 ...................................................................35381-500-00 ...................................................................47381-533-00 ...................................................................46381-537-00 ...................................................................46381-542-00 ...................................................................46381-548-00 ...................................................................46381-555-00 ...................................................................46381-733-00 ...................................................................47381-737-00 ...................................................................47381-742-00 ...................................................................47381-748-00 ...................................................................47381-755-00 ...................................................................47382-014-17 ...................................................................38382-015-00 .......................................................38, 53, 55382-020-09 .......................................................39, 53, 55382-020-11 .......................................................39, 53, 55382-020-13 .......................................................39, 53, 55382-020-15 .......................................................39, 53, 55382-020-17 .......................................................39, 53, 55382-033-00 .......................................................38, 53, 55382-033-11 .......................................................40, 53, 55382-033-13 .......................................................40, 53, 55382-033-15 .......................................................40, 53, 55382-033-17 .......................................................40, 53, 55382-037-00 .......................................................38, 53, 55382-037-09 .......................................................40, 53, 55382-037-11 .......................................................40, 53, 55

Nummerisch

t300-006-00 .................................................................100310-010-00 .................................................................100310-015-00 .................................................................100330-560-00 ...................................................................35330-770-00 .......................................................78, 86, 94330-772-00 .......................................................78, 86, 94330-821-00 .................................................................103330-831-00 .................................................................103330-832-00 .................................................................103350-010-00 ...................................................................65350-102-00 ...................................................................60350-105-00 ...................................................................61350-105-00 .............................................................61, 62350-106-00 ...................................................................62350-140-00 ...................................................................61350-140-00 .............................................................61, 62350-141-00 ...................................................................61350-141-00 .............................................................61, 62350-142-00 ...................................................................61350-142-00 .............................................................61, 62350-143-00 ...................................................................61350-143-00 .............................................................61, 62350-145-00 ...................................................................61350-145-00 .............................................................61, 62350-146-00 ...................................................................61350-146-00 .............................................................61, 62350-147-00 ...................................................................61350-147-00 .............................................................61, 62350-148-00 ...................................................................61350-148-00 .............................................................61, 62350-150-00 ...................................................................62350-151-00 ...................................................................62350-152-00 ...................................................................62350-153-00 ...................................................................62350-155-00 ...................................................................62350-156-00 ...................................................................62350-157-00 ...................................................................62350-158-00 ...................................................................62350-160-00 ...................................................................61350-160-00 .............................................................61, 62350-161-00 ...................................................................61350-161-00 .............................................................61, 62360-100-00 .................................................................101360-110-00 .................................................................101360-120-00 .................................................................101360-210-00 .................................................................101360-220-00 .................................................................101360-230-00 .................................................................101360-240-00 .................................................................101360-250-00 .................................................................101360-260-00 .................................................................101360-270-00 .................................................................101360-280-00 ...................................................................66360-280-00 .................................................................101360-300-00 ...................................................................66360-400-00 .................................................................101360-401-00 .................................................................101360-402-00 .................................................................101360-405-00 .................................................................101360-406-00 .................................................................101

382-037-13 .......................................................40, 53, 55382-037-15 .......................................................40, 53, 55382-037-17 .......................................................40, 53, 55382-042-00 .......................................................38, 53, 55382-042-09 .......................................................40, 53, 55382-042-11 .......................................................40, 53, 55382-042-13 .......................................................40, 53, 55382-042-15 .......................................................40, 53, 55382-042-17 .......................................................40, 53, 55382-048-00 .......................................................38, 53, 55382-048-09 .......................................................40, 53, 55382-048-11 .......................................................40, 53, 55382-048-13 .......................................................40, 53, 55382-048-15 .......................................................40, 53, 55382-048-17 .......................................................40, 53, 55382-055-00 .......................................................38, 53, 55382-055-09 .......................................................40, 53, 55382-055-11 .......................................................40, 53, 55382-055-13 .......................................................40, 53, 55382-055-15 .......................................................40, 53, 55382-120-09 ...................................................................39382-120-11 ...................................................................39382-120-13 ...................................................................39382-120-15 ...................................................................39382-120-17 ...................................................................39382-133-00 ...................................................................38382-133-11 ...................................................................41382-133-13 ...................................................................41382-133-15 ...................................................................41382-133-17 ...................................................................41382-137-00 ...................................................................38382-137-09 ...................................................................41382-137-11 ...................................................................41382-137-13 ...................................................................41382-137-15 ...................................................................41382-137-17 ...................................................................41382-142-00 ...................................................................38382-142-09 ...................................................................41382-142-11 ...................................................................41382-142-13 ...................................................................41382-142-15 ...................................................................41382-142-17 ...................................................................41382-148-00 ...................................................................38382-148-09 ...................................................................41382-148-11 ...................................................................41382-148-13 ...................................................................41382-148-15 ...................................................................41382-148-17 ...................................................................41382-155-00 ...................................................................38382-155-09 ...................................................................41382-155-11 ...................................................................41382-155-13 ...................................................................41382-155-15 ...................................................................41382-233-17 .......................................................42, 53, 55382-237-17 .......................................................42, 53, 55382-242-17 .......................................................42, 53, 55382-248-17 .......................................................42, 53, 55382-255-17 .......................................................42, 53, 55382-320-09 .............................................................48, 57382-320-11 .............................................................48, 57382-320-13 .............................................................48, 57382-320-15 .............................................................48, 57382-333-00 .............................................................48, 57

129

382-333-11 .............................................................49, 57382-333-13 .............................................................49, 57382-333-15 .............................................................49, 57382-337-00 .............................................................48, 57382-337-09 .............................................................49, 57382-337-11 .............................................................49, 57382-337-13 .............................................................49, 57382-337-15 .............................................................49, 57382-342-00 .............................................................48, 57382-342-09 .............................................................49, 57382-342-11 .............................................................49, 57382-342-13 .............................................................49, 57382-342-15 .............................................................49, 57382-348-00 .............................................................48, 57382-348-09 .............................................................49, 57382-348-11 .............................................................49, 57382-348-13 .............................................................49, 57382-348-15 .............................................................49, 57382-355-00 .............................................................48, 57382-355-09 .............................................................49, 57382-355-11 .............................................................49, 57382-355-13 .............................................................49, 57382-355-15 .............................................................49, 57382-433-00 .......................................................42, 53, 55382-437-00 .......................................................42, 53, 55382-442-00 .......................................................42, 53, 55382-448-00 .......................................................42, 53, 55382-455-00 .......................................................42, 53, 55382-533-00 .............................................................50 ,57382-537-00 .............................................................50 ,57382-542-00 .............................................................50 ,57382-548-00 .............................................................50 ,57382-555-00 .............................................................50 ,57382-633-00 ...................................................................42382-637-00 ...................................................................42382-642-00 ...................................................................42382-648-00 ...................................................................42382-655-00 ...................................................................42382-833-00 .............................................................50 ,57382-837-00 .............................................................50 ,57382-842-00 .............................................................50 ,57382-848-00 .............................................................50 ,57382-855-00 .............................................................50 ,57383-033-11 ...................................................................67383-033-13 ...................................................................67383-033-15 ...................................................................67383-033-17 ...................................................................67383-037-09 ...................................................................67383-037-11 ...................................................................67383-037-13 ...................................................................67383-037-15 ...................................................................67383-037-17 ...................................................................67383-042-09 ...................................................................67383-042-11 ...................................................................67383-042-13 ...................................................................67383-042-15 ...................................................................67383-042-17 ...................................................................67383-048-09 ...................................................................67383-048-11 ...................................................................67383-048-13 ...................................................................67383-048-15 ...................................................................67383-048-17 ...................................................................67383-055-09 ...................................................................67

Index

130

386-139-00 ...................................................................77386-140-00 ...................................................................78386-141-00 ...................................................................78386-142-00 ...................................................................78386-143-00 ...................................................................78386-151-00 ...................................................................79386-152-00 ...................................................................79386-153-00 ...................................................................79386-154-00 ...................................................................79386-155-00 ...................................................................79386-160-00 ...................................................................80386-161-00 ...................................................................80386-162-00 ...................................................................80386-170-00 ...................................................................81386-171-00 ...................................................................81386-180-00 ...................................................................76386-190-00 ...................................................................76386-210-00 ...................................................................85386-211-00 ...................................................................85386-213-00 ...................................................................85386-215-00 ...................................................................85386-230-00 ...................................................................85386-231-00 ...................................................................85386-232-00 ...................................................................85386-235-00 ...................................................................85386-236-00 ...................................................................85386-239-00 ...................................................................85386-240-00 ...................................................................86386-241-00 ...................................................................86386-242-00 ...................................................................86386-243-00 ...................................................................86386-251-00 ...................................................................87386-252-00 ...................................................................87386-253-00 ...................................................................87386-254-00 ...................................................................87386-255-00 ...................................................................87386-260-00 ...................................................................88386-261-00 ...................................................................88386-262-00 ...................................................................88386-270-00 ...................................................................89386-271-00 ...................................................................89386-280-00 ...................................................................84386-290-00 ...................................................................84386-310-00 ...................................................................93386-311-00 ...................................................................93386-313-00 ...................................................................93386-315-00 ...................................................................93386-330-00 ...................................................................93386-331-00 ...................................................................93386-332-00 ...................................................................93386-335-00 ...................................................................93386-336-00 ...................................................................93386-339-00 ...................................................................93386-340-00 ...................................................................94386-341-00 ...................................................................94386-342-00 ...................................................................94386-343-00 ...................................................................94386-351-00 ...................................................................95386-352-00 ...................................................................95386-353-00 ...................................................................95386-354-00 ...................................................................95386-355-00 ...................................................................95386-360-00 ...................................................................96

383-055-11 ...................................................................67383-055-13 ...................................................................67383-055-15 ...................................................................67384-110-00 ...................................................................68384-112-00 ...................................................................68384-114-00 ...................................................................68384-116-00 ...................................................................68384-120-00 ...................................................................69384-122-00 ...................................................................69384-124-00 ...................................................................69384-126-00 ...................................................................69384-130-00 ...................................................................76384-210-00 ...................................................................68384-212-00 ...................................................................68384-214-00 ...................................................................68384-216-00 ...................................................................68384-220-00 ...................................................................69384-222-00 ...................................................................69384-224-00 ...................................................................69384-226-00 ...................................................................69384-230-00 ...................................................................84384-310-00 ...................................................................68384-312-00 ...................................................................68384-314-00 ...................................................................68384-316-00 ...................................................................68384-320-00 ...................................................................69384-322-00 ...................................................................69384-324-00 ...................................................................69384-326-00 ...................................................................69384-330-00 ...................................................................92384-910-00 .......................................................76, 84, 90385-110-00 ...................................................................76385-112-00 ...................................................................76385-120-00 ...................................................................76385-122-00 ...................................................................76385-123-00 ...................................................................76385-124-00 ...........................................................76, 102385-130-00 ...................................................................76385-210-00 ...................................................................84385-212-00 ...................................................................84385-220-00 ...................................................................84385-222-00 ...................................................................84385-223-00 ...................................................................84385-224-00 ...........................................................84, 102385-230-00 ...................................................................84385-310-00 ...................................................................92385-312-00 ...................................................................92385-320-00 ...................................................................92385-322-00 ...................................................................92385-323-00 ...................................................................92385-324-00 ...........................................................92, 102385-330-00 ...................................................................92385-910-00 .......................................................76, 84, 90385-912-00 .......................................................76, 84, 90386-110-00 ...................................................................77386-111-00 ...................................................................77386-113-00 ...................................................................77386-115-00 ...................................................................77386-130-00 ...................................................................77386-131-00 ...................................................................77386-132-00 ...................................................................77386-135-00 ...................................................................77386-136-00 ...................................................................77

386-361-00 ...................................................................96386-362-00 ...................................................................96386-370-00 ...................................................................97386-371-00 ...................................................................97386-380-00 ...................................................................92386-390-00 ...................................................................92386-410-00 .......................................................78, 86, 94386-412-00 .......................................................78, 86, 94386-414-00 .......................................................78, 86, 94386-416-00 .......................................................78, 86, 94386-418-00 .......................................................78, 86, 94386-420-00 .......................................................78, 86, 94386-422-00 .......................................................78, 86, 94386-426-00 .......................................................78, 86, 94386-428-00 .......................................................78, 86, 94386-444-00 .......................................................78, 86, 94386-446-00 .......................................................78, 86, 94386-512-00 .......................................................79, 87, 95386-514-00 .......................................................79, 87, 95386-516-00 .......................................................79, 87, 95386-518-00 .......................................................79, 87, 95386-520-00 .......................................................79, 87, 95386-522-00 .......................................................79, 87, 95386-524-00 .......................................................79, 87, 95386-526-00 .............................................................87, 95386-528-00 .............................................................87, 95386-530-00 .......................................................79, 87, 95386-532-00 .................................................................103386-534-00 .......................................................79, 87, 95386-534-00 .................................................................103386-614-00 .......................................................80, 88, 96386-616-00 .......................................................80, 88, 96386-617-00 .......................................................80, 88, 96386-618-00 .......................................................80, 88, 96386-619-00 .......................................................80, 88, 96386-620-00 .......................................................80, 88, 96386-622-00 .......................................................80, 88, 96386-624-00 .......................................................80, 88, 96386-626-00 .......................................................80, 88, 96386-712-00 .......................................................81, 89, 97386-714-00 .......................................................81, 89, 97386-716-00 .......................................................81, 89, 97386-718-00 .......................................................81, 89, 97386-720-00 .......................................................81, 89, 97386-910-00 .......................................................77, 85, 93386-912-00 .......................................................78, 86, 94386-914-00 .......................................................77, 85, 93386-916-00 .......................................................78, 86, 94387-112-00 .................................................................103387-116-00 .................................................................103387-212-00 .................................................................103387-312-00 .................................................................103387-316-00 .................................................................103387-410-00 ...................................................................54387-412-00 .......................................................52, 54, 56387-413-00 .......................................................52, 54, 56387-414-00 ...................................................................58387-415-00 ........................................ 52, 54, 56, 59, 102387-418-00 ...................................................................52387-419-00 ...................................................................52387-420-00 ...................................................................56387-509-00 .................................................................100387-510-00 ........................................ 53, 55, 57, 59, 100

131

387-511-00 ........................................ 53, 55, 57, 59, 100387-514-00 ........................................ 53, 55, 57, 59, 100387-515-00 .................................................................100387-516-00 ........................................ 53, 55, 57, 59, 100387-517-00 .................................................................100387-518-00 ........................................ 53, 55, 57, 59, 100387-519-00 ........................................ 53, 55, 57, 59, 100387-520-00 ........................................ 53, 55, 57, 59, 100387-522-00 ........................................ 53, 55, 57, 59, 100387-523-00 ........................................ 53, 55, 57, 59, 100387-524-00 ........................................ 53, 55, 57, 59, 100387-525-00 ........................................ 53, 55, 57, 59, 100387-530-00 ...........................................................47, 100387-600-00 ........................................ 53, 55, 57, 59, 102387-602-00 ........................................ 53, 55, 57, 59, 102387-604-00 ........................................ 53, 55, 57, 59, 102387-610-00 ........................................ 53, 55, 57, 59, 102387-612-00 ........................................ 53, 55, 57, 59, 102387-620-00 ........................................ 53, 55, 57, 59, 102387-622-00 ........................................ 53, 55, 57, 59, 102387-640-00 ........................................ 53, 55, 57, 59, 102387-650-00 .................................................................102387-660-00 ........................................ 53, 55, 57, 59, 102387-670-00 .................................................................102387-720-00 .................................................................103387-730-00 .................................................................103387-740-00 .................................................................103387-742-00 .................................................................103387-745-00 .................................................................103388-037-13 .................................................................104388-042-13 .................................................................104388-400-00 .................................................................104 388-410-00 .................................................................112388-420-00 .................................................................112388-422-00 .................................................................112388-424-00 .................................................................112388-430-00 .................................................................112388-432-00 .................................................................112388-438-00 .................................................................112388-442-00 .................................................................112388-448-00 .................................................................112

132

Notes

Notes

133

989-

965-

20

Pr

inte

d by

Den

taur

um

G

erm

any

0

6/11

/C/R

1-2

Turnstraße 31 · 75228 Ispringen · Germany · Phone + 49 72 31 / 803-0 · Fax + 49 72 31 / 803-295www.dentaurum-implants.de · E-Mail: [email protected]

www.tioLogic.com

Subject to modificationsDate of information: 06/11

catalogo tiologic implant

Documents

severely worn patrices

stepped countersink position

ray reference sphere

bite registration cap

fixing bone blocks

planungsfoliefr tiologic implantate

integral depth stop

black processing insert