catalogo herramientas skf

SKF Maintenance andLubrication Products

a n o t h e r S K F s o l u t i o n

M E C H A N I C A L T O O L S

H E AT E R S

I N S T R U M E N T S

L U B R I C A N T S

L U B R I C AT O R S

O I L P O W E R


H E AT E R S

L U B R I C A N T S

O I L P O W E R

SKF Maintenance andLubrication Products



7

25

47

71

33

61

With the invention of the first self aligning ball bearing in 1907 SKF

has led the way in the research, development and introduction of

innovative technologies for improving machine operation and plant

productivity. Throughout its history, SKF has been at the forefront of

innovative technologies designed to bring cutting edge solutions across the

industry for enhancing plant reliability and production processes.

With nearly a century of experience and a close working partnership with

customers, SKF has become well-positioned to meet the needs and demands

within the industry. Throughout the years SKF has continually sought not only to

develop innovative products, but to ensure that those products were a reflection

of its unique customer requirements. To that end, SKF has emerged not only as

the world's largest bearing manufacturer, but an industry leader in the

development and application of maintenance technology solutions for improving

plant reliability.

Today, SKF provides a range of solutions from bearings and seals to maintenance

products and training. Our strength lies in our extensive knowledge and

experience in virtually every industry, touching upon most all technologies and applications. From its humble

beginnings in 1907, SKF has risen to become a world leader in innovation, technology and customized

solutions. And remaining true to its founding fathers, SKF is committed to meeting its customer's needs by

continuing to be at the forefront of progress and advancement.

2

1907A History of Innovation

3

Through extensive research into extending bearing life, SKF

discovered that only about 25% of a bearing's performance is

dependent upon the quality of the bearing. Other factors such as

installation, lubrication and maintenance actually have the greatest impact upon bearing life. In an effort to

provide its customers with the right knowledge, tools and technology to get the most from their bearings, SKF

Maintenance Products was founded in 1973 to offer a complete range of maintenance tools and lubricants.

For nearly three decades, SKF Maintenance Products has been building upon its knowledge and expertise in

an effort to help you maximize plant profitability. Today, SKF Maintenance Products offers the most

comprehensive range of mounting and dismounting tools & lubricants available on the market.

SKF's range of maintenance products includes pullers, fitting tools, heaters, instruments, lubricants,

lubricators and oil injection equipment. SKF's maintenance products are designed specifically for bearing

users and regardless of your bearing size, type or application, our comprehensive range of products offers

you the right product for all your bearing maintenance needs.

SKF Maintenance Products

Inside this catalogue you will find SKF's complete range of mounting and dismounting tools and lubricants to help you effectivelymaintain your bearings. To help you locate our products and technical information as easily as possible, we have developed thefollowing quick reference guides for your use:

Table of Contents Located on pages 122-123 lists all products found in each chapter

Designation Index Located on pages 120- 121 lists, in numerical and alphabetical order, each product by designation, followed by product description

Technical Data and Located on pages 88-119, provides the complete list of technical data and ordering detailsOrdering Details per product

Found next to a product, this icon indicates that this product is a new addition to the product range

Located next to each product, indicates on which page you can find the technical data and ordering details for that product

1973

For more information about SKF maintenance products or to order any of these products, please contact your local SKF authorised distributor or SKF sales company. On the internet, SKF can be found at www.skf.com. SKF Maintenance Products can be found at www.mapro.skf.com.

NEW

87-87

How to use this catalogue

4

SKF SolutionsRecognising the need for supplemental resources, SKF hasfocused on combining its broad range of products and industry knowledge to address specific plant maintenance and reliability needs.

By combining its knowledge of bearings, seals, lubrication,maintenance, and condition monitoring, SKF will research,design and implement solutions that go beyond correctivemaintenance. Depending on need, customers can either choosestand-alone services -- such as Shaft Alignment, LubricationAnalysis, and Precision Balancing -- or combine them into an all-inclusive contract strategy.

Areas of focus include: Total Asset Management Maintenance Effectiveness Assessment Machine Reliability Maintenance Asset Intelligence Machine Improvements Supply Management

For more information about SKF Service solutions, contact yourlocal SKF representative, or go to www.skf.com.

The Maintenance Challenge:Achieving More with Less

Today maintenance managers face a difficult task: Although their staff may be very good, they have a larger group of machines to look after and may not be able to follow precisionmaintenance practices. In addition, equipment maintenance is becoming more complicatedbecause of ongoing technical advances, and environmental and safety laws are increasinglystrict, placing more pressure on this function than ever before.

Despite all these challenges, maintenance personnel are driven by management to maximizemachine uptime to increase productivity.

The bearing maintenance tools and instruments shown in thiscatalogue are key components in the solutions mix. Whether usedby maintenance personnel or by an SKF Service technician, they provide the means to safe and damage-free componentinstallation and dismounting.

5

Around 16% of all premature bearing failures are caused by poorfitting (usually brute force...) and being unaware of the availability of the correct fitting tools.Individual installations may requiremechanical, hydraulic or heat application methods for correct andefficient mounting or dismounting. SKF offers a complete range of

tools and equipment to make these tasks easier, quicker and more cost effective,backed up by a wealth of service engineering know-how. Professional fitting, usingspecialised tools and techniques, is another positive step towards achieving maximummachine uptime.

Prevent over 60% of premature bearing failures

The SKF Trouble-Free Operation programme consists of a range of quality products and services designed to help reduce bearing failures, thereby increasing plant performance and profitability.

Poor fitting

16

Although 'sealed-for-life' bearings can be fitted and forgotten, some 36% of premature bearing failures are caused by incorrectspecification and inadequate application of the lubricant. Inevitably, any bearing deprived of proper lubrication will fail long before its normal service lifespan. Because bearings are usually the least

accessible components of machinery, neglected lubrication frequently compounds theproblem. Wherever manual maintenance is not feasible, fully automatic lubricationsystems can be specified by SKF for optimum lubrication. Effective lubrication, usingonly recommended SKF greases, tools and techniques, helps to significantly reducedowntime.

Poor lubrication

36

A bearing is a precision component that will not operate efficientlyunless both the bearing and its lubricants are isolated fromcontamination. And, since sealed-for-life bearings in ready-greasedvariants account for only a small proportion of all bearings in use, at least 14% of all premature bearing failures are attributed to

contamination problems. SKF has an unrivalled bearing manufacturing and design capability and can tailor sealing solutions for the most arduous operating environments.

Contamination

14

Whenever machines are overloaded, incorrectly serviced orneglected, bearings suffer from the consequences, resulting in 34%of all premature bearing failures. Sudden or unexpected failure can be avoided, since neglected or overstressed bearings emit 'earlywarning' signals, which can be detected and interpreted using SKF

condition monitoring equipment. The SKF range includes hand-held instruments, hard-wired systems and data management software for periodic or continuousmonitoring of key operating parameters.

Fatigue

34

%

%

%

%

6

Bearing arrangements

SKF methods and tools

Dismounting toolsMounting tools

Cylindricalseating

Taperedseating

Adaptersleeve

Withdrawalsleeve

Smallbearings

Mediumbearings

Largebearings

Smallbearings

Mediumbearings

Largebearings

Smallbearings

Medium bearings

Largebearings

Smallbearings

Mediumbearings

Largebearings

Cylindrical roller bearing

types NU, NJ, NUP, all sizes

Mechanical Hydraulic Oil injection Heaters Mechanical Hydraulic Oil injection Heaters

+

+

*

+

*

+

+

Small bearings: Bore diameter < 80 mm • Medium bearings: Bore diameter 80 - 200 mm • Large bearings: Bore diameter > 200 mm

* Only for self-aligning ball bearings.

Key

Jaw puller Bearingseparator

Hydraulic puller

Fitting tool Hook spanner

Impact spanner

Hydraulic nutand pump

Oil injectionmethod

Hot plateInduction

heater

Aluminiumring

EAZ heater

7

Precautions when mounting bearings in

a cold condition 8

Interference fits: cylindrical shafts 8

Interference fits: tapered shafts 9

Hook spanner HN and HN B series 10

Axial lock nut sockets TMFS and TMFS N series 10

Impact spanners 718 series 11

Bearing lock nut spanner TMHN 7 series 11

Bearing fitting tools TMFT series 12

Combi Kit TMMK 10-30 14

Guide to SKF puller selection 15

TMMA puller series: EasyPull 16

Hydraulic ram TMHR 8/SET 17

Hydraulic spindle TMHS 8/SET 17

Standard jaw pullers TMMP series 18

Reversible jaw pullers TMMR F series 18

Heavy duty jaw pullers TMMP series 19

Hydraulically-assisted heavy duty

jaw pullers TMHP series 19

Hydraulic jaw puller kit TMHP 8 20

Hydraulic puller kit TMHC 108 20

Strong back pullers TMBS series 21

Internal bearing puller kits TMSC series 21

Blind housing puller kit TMMD 61 22

Blind housing puller kit TMBP 20 23

CARB™ bearing pullers TMMC series 24

Pullerboard TMMB 100 24


8



Interference fits: cylindrical shafts

Premature bearing failure can result from damage incurred when a bearing is incorrectly mounted.

Typical problems that can cause premature failures are: Damage caused during the

fitting procedure Incorrect sized shafts and housings i.e.

too loose or too tight

Retaining lock nuts coming loose inoperation

Burred and damaged shaft andhousing seats and shoulders

Incorrectly mounted bearings

Precautions when mounting bearings in a cold condition

Incorrect mounting When bearings are mounted cold, care must be taken to ensurethe drive-up forces are applied to the ring with the interferencefit. Damage and a resulting bearing failure can occur if themounting force is transmitted through the rolling elementscausing damage to the raceways.

Correct mounting The correct way to minimise raceway damage is to use thespecifically designed tools from SKF - the TMFT fitting toolsseries. These tools ensure that the drive-up forces are applied effectively and evenly to the component with the interference fitavoiding raceway damage.

Most bearings are fitted to their shaft or housing with one component having an interference fit or in some casesboth. For determining the correct fit refer to the SKF General Catalogue, the SKF Maintenance Handbook or consultan SKF application engineer.

C

D

BA

A Shaft interference fit B Housing interference fit C Uneven distribution of forces can result in raceway damage D With the correct tools raceway damage is avoided

9

Spherical roller bearings Method Correct adjustment of spherical roller bearings isdetermined by measuring the residual internal clearance in thebearing or by the amount of axial drive-up. Details of the requiredreduction of clearance and axial drive-up can be obtained fromSKF tables.

Interference fits: tapered shafts

Self-aligning ball bearings Method Adjustment of double row, self-aligning ball bearings is more difficult to achieve than spherical roller bearings becausethe feeler gauge method cannot be used. The most effectivemethod to adjust this type of bearing correctly is to use the SKF TMHN 7 lock nut spanner set. Please note, for more detailedinformation concerning bearing fitting practices refer to the SKF General Catalogue, SKF Maintenance Handbook or consultan SKF application engineer.

over incl. min max min max min max Normal C3 C4mm mm mm mm

24 30 0,015 0,020 0,30 0,35 - - 0,015 0,020 0,03530 40 0,020 0,025 0,35 0,40 - - 0,015 0,025 0,04040 50 0,025 0,030 0,40 0,45 - - 0,020 0,030 0,050

For the complete table refer to the SKF General Catalogue or Maintenance Handbook

Bearings mounted on tapered seatings achieve theirinterference fit by being driven up the tapered shaft.Care should be taken to ensure the bearing is not drivenup too far as all the internal clearance may be removedand damage to the bearing is possible.

A B

A

Method

B

C D

A Correctly mounted: Bearing driven up the correct distance and the right clearance is achieved

B Incorrectly mounted: Bearing driven up too far and all clearance removed; damage possible

C Before adjustmentD After adjustment

A Correctly mounted: Bearing driven up the correct distance and the right clearance is achieved

B Incorrectly mounted: Bearing driven up too far and all clearanceremoved; damage possible

Bearing bore Reduction in radial Axial drive-up Minimum permissible residual diameter internal clearance Taper 1:12 Taper 1:30 clearance after mounting

d on diameter on diameter bearings with initial clearance

Technical data

10



Hook spanner HN and HN B series

Exact spanner radius reduces nut damageSKF hook spanners are designed for safe, easy tightening and loosening of lock nuts used to secure and adjust bearings.

One spanner size per nut size enables exact grip

Spanners for straight slots (HN spanners) suitable for nuts KM, N,AN, KMK, KMF and KMT

Spanner for round holes suitable for nuts KMTA

Avoids shaft and nut damage Safe and user-friendly

Axial lock nut sockets TMFS and TMFS N series

Easy mounting and dismounting without nut damageSKF axial lock nut sockets are designed for safe and easy tightening and loosening of lock nuts. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves.

Demands less space around the bearing arrangement than hookspanners

Inch connections for power tools or torque wrenches TMFS fits nuts of series KM, KMK (metric) and KMF TMFS N fits nuts of series AN and N (imperial)

88

88-89

11

Impact spanners 718 series

High impact forces without nut damage SKF impact spanners are designed for safe and easy tighteningand loosening of locknuts used to secure and adjust largerbearings directly on the shaft or with adapter and withdrawal sleeves.

Avoids shaft and nut damage Safe and user friendly Impact applied effectively to the nut Suitable for nuts of series KM, HM..T,

HML..T, HM 30, HM 31, AN.., N.. and N... (for nut sizes 23 and above)

Special wide impact face

Bearing lock nut spanner TMHN 7 series

Reduced failures from overtighteningThe TMHN 7 set of lock nut spanners is designed to make the mounting of self-aligning ball bearings moreprofessional. To help ensure long-term reliability when mounting self-aligning ball bearings, it is vital to install thebearing with correct radial clearance.

7 different-sized spanners to fit nutsizes 5 to 11

Each spanner is clearly marked withcorrect tightening angle and protractor

4 grip points on each spanner givingbetter and safer grip on the nut

Reduced risk of damaging bearing by overtightening

A B C

A Tighten the nut using hand-pressure only, to make metal-to-metal contact between the tapered surfaces.Do not use the handle.

B Mark the shaft at a point corresponding to the beginning of the orange semicircular marking on the tool.C Tighten the nut using the handle until the shaft marking corresponds to the end of the orange semicircular

marking. Lock the nut.

NOTE: Make sure that the adapter sleeve does not move on the shaft while tightening.

Spanner Bearing designationHNM 5 1205 EK 2205 EK 1305 EKHNM 6 1206 EK 2206 EK 1306 EK 2306 KHNM 7 1207 EK 2207 EK 1307 EK 2307 EKHNM 8 1208 EK 2208 EK 1308 EK 2308 EK

Spanner Bearing designationHNM 9 1209 EK 2209 EK 1309 EK 2309 EKHNM 10 1210 EK 2210 EK 1310 EK 2310 KHNM 11 1211 EK 2211 EK 1311 EK 2311 K

Selection chart

89

89

12



Bearing fitting tools TMFT series

Reduced bearing damage through effective mounting The SKF bearing fitting tool kits are designed for quick, precise and safe mounting of bearings with bore diametersfrom 10 to 50 mm (0.39 to 2 in). The right combination of impact rings and sleeves ensures that mounting forces arenot transmitted via the rolling elements of the bearing.

2 kit combinations for selected use Individually packed rings and sleeves

for special requirements Super-tough acetal resin,

impact resistant material Special design sleeve head for even

force distribution around ring Eliminates impact damage to

the bearing Covers a wide range of

various bearings Can be used also to mount bushings,

seals and pulleys, etc. Special kit (TMFT 7D) for miniature and

small precision bearings

Dead-blow hammer TMFT 33-H Unique dead-blow hammer for

mounting of precision parts Nylon double-sided hammer head

avoids damaging of parts Special rubber handgrip

d / D 60 62 10 12

5 / 16 625 -6 / 19 626 1267 / 19 607 -7 / 22 627 1278 / 22 608 1089 / 24 609 -9 / 26 629 129

Rings

Selection chart TMFT 7D

TMFT 7D

TMFT 33

90

13

Sleeves Rings SKF bearings series

60 63 12 13 72B 32 222 223 NU-NJ-N 302 303 313 CARBTM

d / D 62 64 22 23 73B 33 213 2 3 4 322 323

10 / 26 6000 12910 / 30 6200 1200 320010 / 30 220010 / 35 6300 1300

12 / 28 600112 / 32 6201 1201 320112 / 32 220112 / 37 6301 130112 / 37 2301

15 / 32 600215 / 35 6202 1202 7202 B 320215 / 35 220215 / 42 6302 1302 3302 3030215 / 42 2302

17 / 35 600317 / 40 6203 1203 7203 B 3203 3020317 / 40 220317 / 47 6303 1303 7303 B 3303 3030317 / 47 2303

20 / 42 600420 / 47 6204 1204 7204 B 3204 20420 / 47 220420 / 52 6304 1304 7304 B 3304 21304 304 30304 3230420 / 52 6403 2304

25 / 47 600525 / 52 6205 1205 7205 B 3205 22205 205 3020525 / 52 220525 / 62 6305 1305 7305 B 3305 21305 305 30305 3130525 / 62 6404 2305 32305

30 / 55 6006 C 6006 V30 / 62 6206 1206 7206 B 3206 22206 206 30206 C 220630 / 62 2206 32206 C 2206 V30 / 72 6306 1306 7306 B 3306 21306 306 30306 3130630 / 72 6405 2306 405 32306

35 / 62 6007 C 4908 V*35 / 72 6207 1207 7207 B 3207 22207 207 30207 C 4910 V*35 / 72 2207 32207 C 6910 V*35 / 80 6307 1307 7307 B 3307 21307 307 30307 31307 C 2207 V35 / 80 6406 2307 406 32307

40 / 68 6008 C 4908 V**40 / 80 6208 1208 7208 B 3208 22208 208 30208 C 220840 / 80 C 2208 V40 / 90 6308 1308 7308 B 3308 21308 308 30308 3130840 / 90 6407 2308 22308 407 32308

45 / 75 600945 / 85 6209 1209 7209 B 3209 22209 209 30209 C 220945 / 85 2209 32209 C 2209 V45 / 85 C 6912 V*45 / 100 6309 1309 7309 B 3309 21309 309 30309 3130945 / 100 6408 2309 22309 408 3230945 / 100* 6013 1211 7211 B 3211 22211 211 C 221145 / 100* 6211 2211 C 2211 V

50 / 80 6010 C 6910 V**50 / 90 6210 1210 7210 B 3210 22210 210 30210 C 221050 / 90 2210 32210 C 2210 V50 / 90* 6011 C 4910 V**50 / 90* 601250 / 110 6310 1310 7310 B 3310 21310 310 30310 3131050 / 110 6409 2310 22310 409 3231050 / 110* 6014 1212 7212 B 3212 22212 212 C 221250 / 110* 6015 1213 7213 B 3213 22213 213 C 2212 V50 / 110* 6212 2212 7311 B 3311 21311 31150 / 110* 6213 2213 22311 41050 / 110* 6311 131150 / 110* 6410 2311

CTMFT 33-C

BTMFT 33-B

ATMFT 33-A

* Outer ring fitting only ** Inner ring fitting only

Selection chart TMFT 33

14



Dismounting Puller arms made of high tensile alloy steel All arms provided with colour codes

for easy identification Hinged arms for optimal grip in bearing Elastic locking ring for easy connection

of arms to spindle

Mounting Impact damage to bearings eliminated

with fitting tools Rings and impact surfaces made of a super-tough

acetal resin; resulting in high mechanical strengthand fatigue and impact resistance at a very low weight

Fiberglass handle on hammer for safe andergonomic grip; absorbs shocks and vibrations

Combi Kit TMMK 10-30

The SKF Combi Kit, TMMK 10-30, comprising a total of 50 different components, is designed for quick, precise and safe mounting and dismounting of bearings with a bore diameter between 10 and 30 mm (0.4 - 1.2 in). For mounting, a multi-purposefitting tool is included which is suitable for bearings as well as bushings, seal rings,belt pulleys and other similar products. For dismounting, a three-armed puller isincluded. This puller can be used for deep groove ball bearings with an interference fit on both rings or on the outer-ring without a shaft. All parts are clearly arranged in a practical transport case with a selection chart and instruction drawings.The Combi Kit is specially designed to enable dismounting of deep groove ballbearings with an interference fit in the housing, on the outer ring.

6000 M12 A1 A 10/266200 M12 A1 1 A 10/306300 M12 A3 A 10/35

6001 M12 A1 A 12/286201 M12 A2 2 A 12/326301 M12 A3 A 12/37

6002 M12 A1 A 15/326202 M12 A2 3 A 15/356302 M12 A3 A 15/42

6003 M12 A1 A 17/356203 M12 A2 A 17/406303 M16 A4 4 A 17/476403 M16 A5 B 20/52

6004 M12 A2 B 20/426204 M12 A3 5 B 20/476304 M16 A4 B 20/52

63/22 M16 A4 B 25/526005 M12 A2 6 B 25/476205 M12 A3 B 25/526305 M16 A5 B 25/62

63/28 M16 A5 B 30/626006 M12 A2 7 B 30/556206 M16 A4 B 30/626306 M16 A5 B 30/72

6007 M12 A36207 M16 A56307 M16 A5

6008 M12 A36208 M16 A5

6009 M12 A36209 M16 A5

6010 M12 A36210 M16 A5

6011 M16 A46211 M16 A5

6012 M16 A4

6013 M16 A4

6014 M16 A5

6015 M16 A5

6016 M16 A5

6017 M16 A5

Selection chart TMMK 10-30

A

B

D d

NEW

Multi-purpose kit for easy and quick mounting and dismounting

15

A

A+B

B

C

mm in mm in kN lbf

EXTERNAL TMMP 2x65 2 15 - 65 0.6 - 2.6 60 2.4 6 1,340PULL TMMP 2x170 2 25 - 170 1.0 - 6.7 135 5.3 18 4,030

TMMP 3x185 3 40 - 185 1.6 - 7.3 135 5.3 24 5,380TMMP 3x230 3 40 - 230 1.6 - 9.0 210 8.3 34 7,610TMMP 3x300 3 45 - 300 1.8 - 11.8 240 9.4 50 11,200

TMMP 6 3 50 - 127 2.0 - 5.0 120 4.7 60 13,500TMMP 10 3 100 - 223 3.9 - 8.7 207 8.2 100 22,500TMMP 15 3 140 - 326 5.5 - 12.8 340 13.4 150 33,700

TMMA 3 3 36 - 150 1.4 - 5.9 150 5.9 30 6,700TMMA 5 3 52 - 200 2.0 - 7.8 200 7.9 50 11,240TMMA 8 3 75 - 250 3.0 - 9.8 250 9.8 80 17,984

TMHC 108 3 50 - 150 2.0 - 5.9 100 - 150 3.9 - 5.9 80 17,984TMHP 8 3 75 - 250 3.0 - 9.8 150 - 240 5.9 - 9.4 80 17,984

TMHP 15/260 3 195 - 386 7.7 - 15.2 264 10.4 150 33,700TMHP 30/170 3 290 - 500 11.4 - 19.7 170 6.7 300 67,400TMHP 30/350 3 290 - 500 11.4 - 19.7 350 13.7 300 67,400TMHP 30/600 3 290 - 500 11.4 - 19.7 600 23.6 300 67,400TMHP 50/140 3 310 - 506 12.2 - 19.9 140 5.5 500 112,000TMHP 50/320 3 310 - 506 12.2 - 19.9 320 12.6 500 112,000TMHP 50/570 3 310 - 506 12.2 - 19.9 570 22.4 500 112,000

Shaft diameterd

TMBS 50 2 0 - 50 0 - 2.0 115 4.5 30 6,700TMBS 100 2 20 - 100 0.8 - 3.9 870 34.2 80 18,000TMBS 150 2 35 - 150 1.4 - 5.9 860 33.8 80 18,000TMHC 108 2 20 - 100 0.8 - 3.9 270 10.6 80 18,000

COMBINED Width of gripINTERNAL OR DEXTERNAL PULL TMMR 40F 2 23 - 48 0.9 - 1.9 65 2.6 15 3,400

TMMR 60F 2 23 - 68 0.9 - 2.7 80 3.2 15 3,400TMMR 80F 2 41 - 83 1.6 - 3.3 94 3.7 30 6,750TMMR 120F 2 41 - 124 1.6 - 4.9 120 4.7 30 6,750TMMR 160F 2 67 - 164 2.6 - 6.5 126 5.0 40 9,000TMMR 200F 2 66 - 203 2.6 - 8.0 151 5.9 40 9,000TMMR 250F 2 74 - 254 2.9 - 10.0 178 7.0 50 11,250TMMR 350F 2 74 - 350 2.9 - 13.8 233 9.2 50 11,250

INTERNAL PULL Shaft diameter Hammer Weight of hammerdisplacement

d kg lb

TMSC 6 1 8 - 36 0.3 - 1.4 220 8.66 1,0 2.2TMSC 30-60 1 30 - 60 1.2 - 2.4 300 11.8 1,6 3.5

BLIND PULL Bore diameter SKF bearingseries

d

TMMD 61 3 10 - 100 0.4 - 3.9 60003 10 - 85 0.4 - 3.3 62003 10 - 65 0.4 - 2.6 63003 17 - 50 0.7 - 2.0 6400

TMBP 20 2 105 - 160 4.1 - 6.3 60002 65 - 150 2.6 - 5.9 62002 45 - 105 1.8 - 4.1 63002 30 - 85 1.2 - 3.3 6400

TMMK 10-30 3 10 - 30 0.4 - 1.2

Type of pull Designation No. of arms Width of grip Effective arm length Maximum withdrawal force

D L Fmax

B C

Guide to SKF puller selection

A

16



TMMA puller series: EasyPull

Safe and simple dismounting of bearingsEquipped with spring operated arms and safety pin, SKF's new patent-pending EasyPull is one of the mostuser-friendly and safe tools on the market today. Ergonomically designed, the spring-operated arms enablethe user to position the puller behind the component with just one movement of the hand. Costs resultingfrom exchange of expensive spare parts are avoided with the EasyPull's unique safety pin which breaksinstead of the puller itself, should excessive force be used. Additionally, hazardous slipping of the puller claws is avoided due to the special locking mechanism which ensures a tighter grip of the component as the pulling force increases.

EasyPull dismounts the most difficult bearingsDismounting a bearing can be a demanding task for both userand puller. The new EasyPull, with its uniquely designed openingmechanism and safety pin, makes dismounting easy. Simply openthe arms of the EasyPull by pressing the red rings together,

place the EasyPull behind the component with one movement ofyour hand and pull either manually or with one of SKF's hydraulictools. It's as easy as that.

User-friendly: Extremely user-friendly due to spring

operated and self-locking arms,gripping behind the component with just one movement of the hand

Ergonomic red-rings Available in three sizes with a

maximum withdrawal force of 3, 5 or 8tonnes (30, 50 or 80 kN), enabling easy selection

Hydraulic force generators available for the 8 tonne (80 kN) EasyPull

Light-weight

Safe: The safety pin, or shear pin, is a critical

design feature of this product The safety pin is designed to break at

the maximum load for that puller.Continued breakage of the safety pin may indicate the need for a larger puller

Safety pin minimises any injury to the user and prevents damage to puller arms, rings and spindle

Self-locking arms prevent risk ofslipping of puller under load

Cost-saving: No need to buy expensive spare-parts;

a unique safety pin breaks shouldexcessive force be used

Service life of puller extended by safety pin

Self-centering avoids damage to shaft Efficient use of time due to

quick dismounting

NEW

90

17

Force Generators: Hydraulic Spindle and Hydraulic Ram

The SKF hydraulic force generators enable users to dismount componentseasily. Used in combination with SKF pullers, these hydraulic tools provideup to 8 tonnes of force and are both easy and safe to use. Both the spindleand ram have long strokes (respectively 38 and 175 mm/1.5 and 6.8 in) andare available with extension pieces, enabling a total reach increase of 338 and 475 mm (13.3 and 18.7 in).

Hydraulic Spindle TMHS 8/SET Overloading prevented by safety pin Provides 8 tonnes (80kN) force Long stroke (38 mm/1.5 in) Suitable for hexagonal wrenches 3 extension pieces for a reach

increase of 338 and 475 mm/13.3 and 18.7 in

Provided with a tube of puller grease LGEV 2/0.035

To use in combination with the TMMA 8, TMHP 8, TMBS 100 and 150, and TMHC 108 pullers

Hydraulic Ram TMHR 8/SET: For easy and fast dismounting Easy force generation up to

8 tonnes (80 kN) Long stroke (175 mm/6.8 in) 3 extension pieces for maximum reach

increase of 338 and 475 mm/13.3 and 18.7 in

To use in combination with the TMMA 8, TMHP 8, TMBS 100 and 150, and TMHC 108 pullers

Requires handpump (TMJL 100,729124 or 728619) or air-driven pump(TMJA 70E)

Overloading prevented by safety valve

For extra pulling power: TMHS 8/SET and TMHR 8/SET

Description TMHS 8 TMHS 8/SET TMHR 8 TMHR 8/SET

Hydraulic spindleHydraulic ramSafety pinsNose pieceExtension piece 50 mmExtension piece 100 mmExtension piece 150 mmCase

Puller Force generator

Mechanical TMHP -1 TMHS 8 TMHR 8spindle Hydraulic Hydraulic Hydraulic

spindle spindle ram

TMMA 3TMMA 5TMMA 8TMHP 8TMBS 50TMBS 100TMBS 150TMHC 108

Standard Optional Not available

SKF Force Generators and their applications

Contents list

90

18



One of the easiest and most effective ways to dismount small to mediumsize bearings is to use a mechanical puller. Using an SKF puller helps toensure that no damage is caused to the bearing or to the bearing seatingduring dismounting. SKF standard jaw pullers offer you easy and safe jawpuller operation.

Range of five different jaw pullers withtwo or three arms

Maximum nominal span from 65 to 300 mm (2.6 to 11.8 in)

Cone system for automatic centeringand secure positioning of arms

Strong springs to keep arms apart foreasy operation

Hardened, high quality carbon steel

Standard jaw pullers TMMP series

Versatile two and three arm mechanical pullers

Reversible jaw puller TMMR F series

Combined internal and external pullerThe multipurpose SKF TMMR F jaw pullers are able to grip on boththe outside as well as the inside of a component, with equal strength. The TMMR F’s are now available as a complete set, TMMR 8.

Both internal and external pulling Puller for use in every workshop Self-locking arms Special safety neck avoids damaging

of thread and arms Extra hexagonal head on beam allows

rotation during dismounting Gripping range from 12 to 350 mm

(0.5 to 13.8 in) Also available as complete set

on a stand

NEW

90

90

19

Heavy duty jaw pullers TMMP series

Powerful self-centering mechanical pullersThe SKF TMMP heavy duty jaw pullers provide perfect alignment and shaftprotection as well as an exceptional grip for medium to large size bearings.

3 arm jaw pullers with a maximumwithdrawal force of 6 to 15 tonnes(13,500 to 33,700 lbf)

Unique pantograph system for gripwidth adjustment that counteractsmisalignment during operation

Fast, efficient and smooth handling Blackened, high quality steel with

optimum corrosion resistance

Hydraulically-assisted heavy duty jaw pullers TMHP series

The SKF hydraulically-assisted pullers TMHP 15, TMHP 30 and TMHP 50 provide new combined forces ofpuller power and safety. They are self-centering pullers for the occasions when large forces are inevitable.

Hydraulically assisted pullers with amaximum withdrawal force of 15, 30 or 50 tonnes (33,700 to 112,000 lbf)

Pantograph system for ultimatealignment of withdrawal forces and minimised risk of damaging shaft or bearing

Extreme forces applied with ease (self-centering, lifting handle, eye bolt, etc.)

Can be supplied with or without theSKF hydraulic pump TMJL 100

Powerful self-centering hydraulic pullers

91

91

20



Hydraulic puller kit TMHC 108

The SKF TMHC 108 is a combined hydraulic puller kit consisting of both a jaw puller and a strong backpuller. Both pullers use the unique powerful 8 tonnes hydraulic spindle.

Combination hydraulic kit offering two puller types

Jaw puller reach up to 150 mm (6 in) - strong back puller reach up to 270 mm (10.6 in)

Easy to use Alternative force generators:

hydraulic spindle (TMHS 8/SET) and hydraulic ram (TMHR 8/SET)

Powerful combination kit with up to 8 tonnes pulling capacity

Hydraulic jaw puller kit TMHP 8

A powerful 8 tonnes capacity puller kitThe SKF TMHP 8 is a unique puller kit combination of three differentarm lengths providing a maximum of 8 tonnes pulling force. It is designed with a self-locking system.

Puller kit with a mechanical-hydraulic spindle providing 8 tonnes pulling force

Self-locking arm system for approved safety (TÜV/GS)

Treated arms for ultimate anti-corrosive properties

Easy to use Alternative force generators:

hydraulic spindle (TMHS 8/SET) and hydraulic ram (TMHR 8/SET)

92

92

21

Strong back pullers TMBS series

Up to 8 tonnes pulling capacity The SKF TMBS strong back pullers are supplied in kit form with allthe necessary accessories to cover the most difficult pulling operations. The larger kits are equipped with a unique powerful 8 tonnes hydraulic ramwhile the smaller kit (TMBS 50) uses a mechanical spindle.

Puller kit with hydraulic spindle,separator, main rods and three pairs of extension rods (TMBS 100 and TMBS 150)

Mechanical puller kit (TMBS 50) Extreme reach (up to 860 mm / 34 in) Shaft diameters (up to 150 mm / 6 in) Engages the inner bearing ring,

ensuring that no forces have to gothrough raceways and rolling elementswhich would risk damaging the bearing

Treated parts for proper protectionagainst corrosion

Hydraulic ram for effortless dis-mounting (TMBS 100 and TMBS 150)

Supplied in strong metal cases Alternative force generators for

TMBS 100 and TMBS 150: hydraulicspindle (TMHS 8/SET) and hydraulicram (TMHR 8/SET)

Internal bearing puller kits TMSC series

The SKF TMSC blind housing puller kits are ideal for removing bearings from housings that are difficult toreach with conventional pullers. The TMSC 6 kit is supplied with 6 different adjustable collets covering borediameters from 8 to 36 mm (0.3 to 1.4 in), and the TMSC 30-60 kit with 3 different collets covering bore diameters from 30 to 60 mm (1.2 to 2.4 in).

Slide impact hammer assisted pullers

Easy removal of bearings in blind housings

Positive bearing grip through collet expansion

Prevents housing damage Six segment collets for efficient force

application/transmission Supplied in a sturdy metal carry case

C

A

B

A Insert the extractor through the bore of the bearing

B Tighten the collet nut in order to expand theextractor behind the bearing

C Connect the slide hammer. Extract bythrowing the hammer towards the handle

92-93

93

22



The SKF TMMD 61 is an excellent bearing puller for removing ball bearings in blind housings. The kit comescomplete with 6 different arm sets and 2 supporting spindles covering 61 different bearings from 10 to 100 mm (0.4 to 4 in) shaft diameters.

6 arm sets and 2 withdrawal spindles,neatly housed in a practical carrying case weighing only 3,2 kg (7 lb)

Hinged arms for optimised grip in bearing

Elastic locking ring for easy connection of arms to spindle

High tensile alloy steel for optimum performance

Selection chart for bearings

Ball bearing type Arm SpindleSKF standard bearing

60.. 62.. 63.. 64..

6000 62006001 TMMD A160026003

6004 62016005 6202 TMMD A2 TMMD M126006 6203

6007 6204 63006008 6205 6301

TMMD A36009 63026010

6011 6206 63036012 6304 TMMD A46013

6014 6207 6305 64036015 6208 63066016 6209 6307 TMMD A56017 6210

6211

6018 6212 6308 6404TMMD M16

6019 6213 6309 64056020 6214 6310 6406

6215 6311 6407 TMMD A66216 6312 64086217 6313 6409

6410

Selection chart TMMD 61

Blind housing puller kit TMMD 61

Easy dismounting of ball bearings in blind housings

93-94

23

Ball bearing type AdaptersSKF standard bearing

60.. 62.. 63.. 64..

6021 6213 6309 6406 76022 62146024 6215

6216

6026 6217 6310 6407 86028 6218 6311 64086030 6312 6409

6032 6219 6313 6410 96220 6314

6221 6315 6411 10

6222 6316 6412 116224 6317 64136226 631862286230

6319 6414 126320 64156321 6416

6417

Blind housing puller kit TMBP 20

The SKF TMBP 20 is a unique adapter type puller for dismounting ball bearings in blind housings. The cage of thebearing must be broken apart in order to insert the adapters between the bearing inner and outer raceways.

Removes bearing without dismantling machinery

Balanced tension for reducedresistance and rapid extraction

Supplied as kit in sturdy carrying case with 20 parts

A Remove seal and open selected section of ball cage. Clean the swarf out. B Insert appropriate bearing adapter and rotate it 90° ensuring positive grip within the bearing race. C Insert the second adapter into prepared area diametrically opposed. Connect the adapters to the main rod. Assemble beam and spindle.

Start extracting.

A B C

General instructions TMBP 20

94

TMBP 20 selection chart

24



CARBTM bearing pullers TMMC series

Dismounting CARBTM bearings with interference fit on the outer ring requires the specially designed TMMC puller. By using this puller the withdrawal force is applied to the outer ring and thereby avoids "self-locking" the bearing. The puller arms are inserted between the rollers and grip on the back of the outer ring.

Specially designed puller to dismount the CARBTM bearing

For dismounting of CARBTM bearings indrying cylinders

Inner ring of CARBTM to be dismountedwith oil injection method

Specially designed arms to grip intothe outer ring between the rollingelements (to outer ring of the bearing)

9 sizes standard, other sizes on request

Pullerboard TMMB 100

No more lost tools with the SKF Pullerboard

Quick and correct puller selection Utilises a minimum of space Reduced risk of lost parts Oil and anti-corrosive resistant Designed to meet all your puller needs

Specially designed workshop combination of the TMHC 108, TMSC 6 and TMMD 61 pullers.

94

95

25

Mounting bearings using heat 26

SCORPIO induction heater TMBH 1 27

Small and medium induction heaters TIH series 28

TIH 060/120-15 trolley 29

Large induction heater TIH 240 series 29

Adjustable induction heater EAZ series 30

Fixed induction heaters EAZ series 30

Electric hot plate 729659 C 31

Aluminium heating rings 721867 series 31

Gloves 32

H E A T E R S

26

H E AT E R S

H E A T E R S

Mounting bearings using heatThe force needed to mount a bearing increases rapidly with bearing size. Because of the mounting force required,larger bearings cannot easily be pressed onto a shaft or into a housing. Therefore the bearing or the housing isheated before mounting.

Principle of induction heatingAn induction heater can be compared to a transformer using the principle of a primary coil with a large number of windings,and a secondary coil with a few windings, on a mutual iron core.The input/output voltage ratio is equal to the ratio of the windings,while the energy remains the same. Consequently, the secondarycoil will provide a low voltage at a high amperage. In the case of the SKF induction heater, the bearing is a short circuited, single turn, secondary coil through which a low A.C. voltage flowsat high amperage, thus generating high heat. The heater itself, as well as the yoke, remains at ambient temperature. As this typeof heating induces an electric current, the bearing will becomemagnetised. It is important to ensure that the bearing is thendemagnetised so that it will not attract metal particles duringoperation. All SKF induction heaters have automaticdemagnetising cycles.

Hot mountingThe temperature difference between the bearing and seatingdepends on the magnitude of the interference fit and the bearingsize. Normally a bearing temperature of 80 to 90 °C (144 to 162 °F) above that of the shaft is sufficient for mounting. Never heat a bearing to a temperature greater than 125 °C (257 °F), because the material may change metallurgically andproduce alterations in diameter or hardness. Local overheating must be avoided and in particular never heat a bearing using anopen flame.

Wear clean protective gloves when mounting a hot bearing.Lifting (hoisting) gear can facilitate mounting. Push the bearingalong the shaft as far as the abutment and hold the bearing inposition, pressing until a tight fit is obtained. SKF supplies a fullrange of heating tools, such as induction heaters and electricplates with an adjustable thermostat and cover for all commonmounting needs.

A Principle of induction heating B Hot mounting C Lifting gear D Never heat a bearing using anopen flame

Selection guideThere are no totally restrictive guidelines to follow when choosingyour SKF bearing heater. It will depend upon the type andgeometrical dimensions of the components you want to heat.Nevertheless, SKF offers the following helpful general selection guide.

A B C D

27

SCORPIO induction heater TMBH 1

A portable bearing heater weighing only 4,5 kg (10 lb)

The SKF bearing heater TMBH 1 is a portable lightweight heater for heating bearingswith an inner diameter from 20 to 100 mm (0.8 to 4 in) and a maximum correspondingweight of 4 to 5 kg (9 to 11 lb). The heater is equipped with temperature and time control.The heater uses a patented method of heating based on high frequency induction andprovides optimised efficiency. It can also be used for heating metal components such as gears, pulleys, bushings and shrink rings. The unit is supplied with a heating clamp,temperature probe, power cable (without plug), heat resistant gloves and a carrying case.

Lightweight and portable (4,5 kg - 10 lbs)

User takes the heater to the bearing Heating efficiency better than 85% Components are never magnetised Noiseless operation 1 year warranty

Now technology eliminates magnetisation This unique product uses a patented method of heating based on high frequency induction - a method that is very quiet and createsno magnetisation at all. The use of high frequency transformers is a well-established technology commonly referred to as switch modepower supplies. These are normally used to power low energy, low voltage electrical apparatus such as televisions and computers.

95

28

H E AT E R S

H E A T E R S

Small and medium induction heaters TIH series

3 year warranty SKF bearing heaters extend induction heating capabilities and increase long-term reliability. This complete range ofnew generation equipment is also more powerful and safer to use. Principal applications include the heating ofbearings, bushings, gears, pulleys, shrink rings, couplings, belt wheels, pistons, sleeves, and so on.

High quality with 3 year warranty CE & TÜV approvals Built-in overheating protection Optimum demagnetisation

50% power reduction (TIH 060/120) State of the art electronics Yokes (3) , 025, 030 and 060

TIH 025: the economical alternative (3,5 kVA/220V - 2,2 kVA/115V)This bearing heater gives you high quality heating power with amechanical timer, but without a temperature control probe anddigital display. These can easily be replaced by a ThermoPenTMTP 1 or the more sophisticated SKF digital thermometersTMDT 900 or TMDT 2.

TIH 030: compact, electronically controlled(3,5 kVA/220V - 2,2 kVA/115V)This is the most powerful heater in the 30 kg (70 lb) bearing weightcategory. Electronics include a timer (0-60 minutes), plus a fastresponse probe for temperature control between 0 - 250 °C (32 - 482 °F). The TIH 030 has a thermometer function andprovides excellent automatic demagnetisation. Three yokes in a handy tray are included as standard equipment.

TIH 060: today’s toughest, most adaptable bearing heater (8 kVA)A maximum capacity of 8 kVA and a 50% reduction key for smallor sensitive components make the TIH 060 the most versatileheating tool for industry. It can easily heat small and largebearings up to 60 kg (140 lb) . It includes a special bearingfunction (110 °C/230 °F) and an automatic temperature hold at thepreselected value, from 0 - 250 °C (32 - 482 °F). Three yoke sizes(20 x 20 mm, 40 x 40 mm, 65 x 65 mm) / (0.8 x 0.8 in, 1.6 x 1.6 in,2.6 x 2.6 in) are included as standard equipment as well as swivelarm TIH 060-20. Available in the voltage/ frequency combinationto suit individual requirements.

Strong, durable bearing heater TIH 065:(8 kVA)Specially designed for continuous use, fan-assisted cooling.

TIH 120: for bigger bearings and shrink fitting success (12 kVA)The tough job of heating large workpieces is made easy with thecompact, powerful, low maintenance TIH 120. The upper yokeslides smoothly through the inner ring of the bearing keeping theworkplace tidy. Maximum recommended bearing weight: 250 kg (550 lb). Electronic features, including the 0 to 60 minuteelectronic timer, are built into the TIH 120.

TIH 125: for continuous production line operations(12 kVA)Specially designed for continuous use, fan-assisted cooling.

TIH 025 TIH 030 TIH 060 TIH 120

95-96

29

Special heaters for large componentsSKF can quote for the supply of special heaters for large heating jobs. To provide an accurate quotation thefollowing information is required:

Dimensions of the component to be heated (d x D x H)

Weight in kg or lb Desired heating times Available power supply Demagnetisation requirements Temperature or time

control requirements

Portability requirements, if any A sketch or drawing of the

component to be heated

Large induction heater TIH 240 series (24 kVA)

Fast, safe heating of large size bearingsThe SKF TIH 240 induction heater is designed for the heating of large size bearings up to 700 kg (1,500 lb)and other large metal components up to 300 kg (660 lb). The unit uses state-of-the-art electronics for accurateheating control from the well-established TIH 120 series induction heater. The SKF experience as the leadinginduction heater supplier ensures the TIH 240 is a reliable heater for large heating jobs.

Fast heating of large size bearings:Heats a 445 kg (980 lb) bearing in just 10 minutes

Designed for easy transport using a fork lift

Automatic demagnetisation 3 year warranty

D

H

d

Width 50 cm (19.7 in)Height 74 cm (29.1 in)

Length 82 cm (32.3 in)Capacity 350 kg (770 lb)

TIH 060/120-15 trolley

Designation TIH 060/120-15

TIH support trolley

Makes the heater easy to move from job to job The SKF TIH 060/120-15 trolley is designed to improve mobility when using SKFheaters, especially the large ones. The trolley has a capacity up to 350 kg (770 lb),allowing transportation of heaters as well as other equipment.

96

30

H E AT E R S

H E A T E R S

Fixed induction heaters EAZ series

Quick roll changes with bearing removal in 3 minutes

In light section mills and wire rod mills, four-row cylindrical roller bearings are usually used to take up the rollseparating forces. The inner rings of these bearings are mounted with an interference fit on the roll necks. Because of the rapid wear, heavy loads and severe contamination the rolls must be frequently replaced. This inevitably involves dismounting the inner rings and remounting them onto new rolls.

Three minutes are enoughUsing the EAZ, inner rings are heated evenly while the roll neck remains cold. The ring, together with the induction heater, can be easily withdrawn from the neck. Even with relatively large rings this complete operation takes not more than two to three minutes. The induction heater also serves as a mounting tool. Therefore pushing the ring onto the neck virtually becomes a trouble-free project.

Reduced time to remove bearings Only one person is required Increased production time Available in different voltage versions Bearings can be reused

Adjustable induction heater EAZ series

For frequent dismounting of cylindrical roller bearingsThe adjustable induction heaters EAZ 80/130 and EAZ 130/170 are used for frequent dismounting of cylindricalbearing inner rings. Where inner rings are removed infrequently, aluminium heating rings, series 721867, are also available. For larger cylindrical inner rings normally found in steel mill applications, SKF can supply special EAZ induction heaters.

Covers most cylindrical bearings 65 to 130 mm (2.5 to 5.1 in) bore diameter

Wide range of power supplies 1 year warranty

Avoids shaft and bearing inner ring damage

Fast and reliable bearing removal Up to n6 interference fit

Designation

EAZ 80/130 213-221 / 313-320 / 412-418 / 1014-1022 / 2213-2220 / 2313-2320EAZ 130/170 222-228 / 321-326 / 419-424 / 1024-1030 / 2222-2228 / 2322-2326*

* All E-types included.

Selection table for bearings NU-NJ-NUP

97

97-98

31

Electric hot plate 729659 C

Thermostat controlled bearing heatingThe SKF electric hot plate, 729659 C, is a professional heating device especially designed for pre-heating smallbearings prior to mounting. The temperature of the plate can be adjusted at the turn of a knob to provide atemperature range of between 50 and 200 °C (120 and 390 °F).

Aluminium heating rings 721867 series

For regular dismounting of cylindrical roller bearings The aluminium heating rings are designed for dismounting inner rings of cylindrical roller bearings. They are available for all bearing sizes of the NU, NJ and NUP series, that is bearings without flanges or with onlyone flange on the inner ring. The rings are available as standard for the following bearing sizes: 204 to 252, 304 to 340, 406 to 430.

Simple and easy-to-use Avoids shaft and bearing

inner ring damage

Adjustable temperature range of 50 - 200 °C (120 - 390 °F)

Protective cover to avoid contamination during heating

98

99

32

H E AT E R S

H E A T E R S

Gloves

Abrasion resistant Blade cut resistant Tear resistant Puncture resistant

Flexible and comfortable gloves with excellent grip

Lint free Tested and certified according to

EN 388 (mechanical hazards)

Special working gloves TMBA G11W

Lint free Heat resistant up to 150 °C/302 °F Cut resistant Contains no asbestos Tested and certified for mechanical

hazards (EN 338) and thermal hazards(EN 407)

Heat resistant gloves TMBA G11

A unique combination of heat, cut, oil and water resistance

KEVLAR® gloves Melt and burn proof Maximum temperature: 250 °C/482 °F Remains heat resistant when wet

Cut resistant Lint free Tested and certified for mechanical

hazards (EN 338) and thermal hazards(EN 407)

Heat and oil resistant gloves TMBA G11H

4343 4241XX

1341 X1XXXX

1142The SKF working glove TMBA G11W is specially designed for generalpurpose industrial maintenance work. The inside palm of the glove is coated with non flammable dots providing excellent grip.Other features are:

The SKF heat resistant gloves TMBA G11 are specially designed for thehandling of heated bearings. They are made of special fabric to obtain the following combination of features:

The SKF heat and oil resistant gloves TMBA G11H are specially designed forthe handling of hot and oily bearings. They are made of multiple layers ofdifferent kinds of fabric to obtain an important combination of features:

KEVLAR® is a registered trademark of DuPont de Nemours

99

33

Introduction to measuring instruments 34

SKF shaft alignment tools TMEA 1 series 35

SKF belt alignment tool TMEB 1 38

Precut machinery shims TMAS series 39

Double slot shims TMAS D series 40

ThermoPen TMTP 1 40

Thermometer TMDT 900 41


K-type thermocouple probes 42

Tachometer TMOT series 43

Electronic stethoscope TMST 2 44

OilCheck monitor TMEH 1 44

Feeler gauges 729865 series 45

Basic Condition Monitoring Package

CMPK series 45

Vibration Penplus CMVP series 46

TempGuard TMTM series 46


34



Noise Temperature Speed Vibrations Alignment Oil condition Bearing condition

Run to failureRun to failure occurs when repair action is not taken until a problem resultsin machine failure. Run to failure problems often cause costly secondarydamage along with unplanned downtime and maintenance costs.

Maintenance Concepts

Maintenance cost comparisons. The most expensive maintenance alternative.

Maintenance Program

Cost of maintenance per year

RUN TO FAILURE

PREVENTIVE

PREDICTIVE

Introduction to measuring instruments

Determining machine and bearing conditionTo ensure long bearing life, it is important to determine the condition of machinery and bearings while in operation.Good predictive maintenance will both reduce machine downtime and decrease overall maintenance costs. To helpyou achieve the maximum life from your bearings, SKF have developed a series of measuring instruments that willanalyse the critical environmental conditions which have an impact on bearing and machine performance.

The SKF range covers the most important parameters for measuring machine condition to achieve optimum bearing performance:

Preventive maintenancePreventive maintenance implies that a machine, or parts of a machine, are overhauled on a regular basis regardless of the condition of the parts. While preferable to run to failure maintenance, preventive maintenance is costly because of excessive downtime from unnecessary overhauls and the cost of replacing good parts along with worn parts.

Preventive maintenance is similar to the regular service of a car.Often unnecessary maintenance is performed.

Predictive maintenanceCondition monitoring/predictive maintenance is the process ofdetermining the condition of machinery while in operation. This enablesthe repair of problem components prior to failure. Condition monitoringnot only helps plant personnel reduce the possibility of catastrophicfailure, but also allows them to order parts in advance, schedulemanpower, and plan other repairs during the downtime.

With condition monitoring, machinery analysis takes two overlappingforms: predictive and diagnostic.

Condition based maintenance means repairs are only carried outwhen required. The most effective alternative.

Time

VibrationPre-Warning Time

Detection by Acoustic Emissions

BearingFailure

Damage Starts

Detection byListen and Feel

Detection by Vibration

35

NEWSKF ShaftAlign TMEA 1 Series

Shaft misalignment is responsible for up to 50% of breakdowns in rotating machinery. Those breakdownscause increased machine downtime that translates directly into higher costs. Additionally, incorrectalignment places a greater load on machine components, resulting in increased wear and tear as well as higherenergy consumption.

To this end, industries spend vast amounts each year to remedy the effects of misaligned shafts. However, misalignment can easilybe eliminated through preventive maintenance. Therefore, proper alignment saves not only money, it will also keep your machinery upand running longer and more efficiently.

Traditional alignment methods do not often produce the exacting degree of accuracy required by today's precision machinery. The rough alignment methods still used nowadays may be quick, but they are also inaccurate. Another traditional method employingdial indicators does offer a higher degree of accuracy, but it requires specialist operators and it is quite time consuming.

Misalignment occurs when the centre lines of rotation of two machinery shafts are not in line with one another. There are two types ofmisalignment: parallel and angular. In most cases, machine misalignment is actually caused by a combination of these two types.

Misalignment costs time and money

What exactly is misalignment?

A Rough alignment method Quick, inaccurateB Dial indicators method Accurate, difficult and time consuming

Advantages of proper alignment

Longer bearing life Less stress on couplings, reducing risk

of overheating and breakage Less wear on seals, lowering risk of

contamination and lubricant leakage

Lower energy consumption Less vibration and noise Increased up time

A

A B

B

A Parallel misalignment (or offset)B Angular misalignment

99

36



SKF offers you the solution

Measure and enter three machinerydimensions (A, B, C)

Rotate the shafts to three different positions

Align the machinery according to the values indicated on the display

Document and print the measurementdata in order to have a record of thealignment data (applicable for bothTMEA 1P and TMEA 1PEx)

The SKF ShaftAlign, TMEA 1 Series, allow accurate and precise alignment. After calculating the actual alignment status of yourmachinery, the display unit shows the actual values ‘live’ that are needed to correct the alignment. This means that, as you adjust the machine, you will see the numbers on the display unit decrease to ‘0’, which indicates proper alignment. Using this simple three-step process means that rechecking is not necessary. This process is carried out vertically and horizontally for both parallel andangular alignment.

Pin-point accuracy with latest laser technology

Easy-to-use: three-step process, measure-align-document

Display unit provides clear “live-time” values during the alignmentprocess making rechecking alignment unnecessary

Compact, light-weight design All three versions supplied in sturdy,

light-weight carrying cases for portability

1,67 mm

1,34mm

0,87 mm

0,82 mm

9

12

3

The principle of operation is easy:

Features & benefits of the TMEA 1 Series:

NEW

All three versions of the TMEA 1 Series use two self-contained measuringunits. A simple rotation process utilises laser technology to measure bothparallel and angular alignment of the shafts. The clear and easy-to-read display unit calculates the corrections needed for proper alignment.

SKF is well aware of what its customers need in today's highly technicalworld: an effective and easy-to-use solution for shaft misalignment. The new SKF ShaftAlign, TMEA 1 Series, offers you simplicity with a high degree of accuracy at an affordable price. These highly innovativetools feature a three-step process for correcting alignment: measuring,aligning and documenting. First, you measure the machinery's currentalignment status. Then you align the machine horizontally and vertically.Finally, you document and keep track of the alignment process. These three simple steps allow you to easily and effectively align shafts using advanced laser technology.

37

The new TMEA 1P offers you the advantage of keeping record of the alignmentprocess. A clear and complete printout of the measurement data shows that the

machine has been properly aligned within the allowed tolerances. The compactthermal printer is operated with the touch of a single button on the display unit,and the easy-to-read printout allows you to keep track of the alignment activities.

Advantages of the TMEA 1P:

Record of the alignment data Single-button printer operation Easy-to-use compact

thermal printer Clear easy-to-read printout Pre-alignment and post-alignment

reports possible

Printer's battery is rechargeable USA or Continental European

adaptor for the printer Printer uses standard thermal paper

roll (120 mm x 20 m) / (4.4 in x 65 ft)

SKF also offers a basic version of its TMEA 1 Series, TMEA 1, without a printer. The TMEA 1 is supplied with a set of blank alignment reports to help you keeprecord of your alignment activities.

Printer version

The TMEA 1PEx has been approved for use in intrinsic safetyzones such as plants of the petrochemical industries. TheTMEA 1PEx has received the European Standard(CENELEC) intrinsically safe approval classification EEx ibIIC T4 (approx. US equivalent NEC Article 500-4 Class 1,Division 1, Groups A, B, C, D safeguards T4).

TMEA 1PEx

Intrinsically safe version

TMEA 1

TMEA 1PNEW

38



Laser technology combines precise accuracy with simple operationAccurate pulley alignment ensuring well-aligned belts is the key to Trouble-Free Operation of your beltdriven equipment. BeltAlign, SKF's belt alignment tool, is the most precise alignment tool for V-belt pulleysavailable. Its advanced lightweight design coupled with cutting-edge technology makes it an ideal solutionto enhance performance and reduce down time of your machinery. With only two components, BeltAlign isfast and easy to attach, and requires no training to operate.

SKF's belt alignment tool TMEB 1

Advantages: User-friendly tool Fast and easy to attach, easy to use Aligns grooves of the pulley rather

than its face, allowing for alignment ofpulleys of unequal width or withdissimilar faces - even fits applicationswhere pulley face cannot be used as a reference

No trial and error. The laser positionindicates the nature of misalignmentallowing easy, accurate adjustment

Facilitates simultaneous adjustment oftension and alignment

V-guides allow for alignment of a wide range of V-belt pulleys

The unique dual laser eliminates need for mirrors or reflectors,minimising diffusion of the beam over longer distances

Long (6 m /20 ft) operating distance

Only two components Lightweight

NEW

A B C D

Where traditional methods align the face of the pulley, BeltAlign's special V-guides allow for fine-tuning of alignment where it countsmost - in the grooves - ensuring pinpoint accuracy. This further enhances performance and reduces pulley and belt wear. The uniquedual laser system eliminates trial and error, allowing for quick and accurate adjustments.

100

A Vertical angle misalignmentB Horizontal angle misalignmentC Parallel misalignmentD Correct alignment

Nature of belt misalignmentThe laser positions clearly show the nature of misalignment. SKF BeltAlign ensurescorrect pulley alignment quickly and easily.

39

Accurate machine movement is essential in any alignment process. SKF precut shims are made of stainless steeland are available in five different dimensions, each with nine different thicknesses. Each shim is supplied in packsof 10 and complete kits are also available.

Made in stainless steel Easy to fit and to remove Close tolerances Reusable Thickness clearly marked

on each shim Fully deburred Also available in inch sizes 4 kits with metric-sized shims and

1 kit with inch-sized shims

Precut Machinery Shims TMAS seriesFor accurate vertical machinery alignment

TMAS 340

Thickness (mm) 0,05 0,10 0,20 0,25 0,40 0,50 0,70 1,00 2,00

Size (mm) Quantities:

100x100 20 20 20 20 20 20 20 20 10125x125 20 20 20 20 20 20 20 20 10

TMAS 360

Thickness (mm) 0,05 0,10 0,25 0,50 1,00 2,00


50x50 20 20 20 20 20 2075x75 20 20 20 20 20 20100x100 20 20 20 20 20 20

TMAS 510

Thickness (mm) 0,05 0,10 0,20 0,25 0,40 0,50 0,70 1,00 2,00


50x50 20 20 20 20 20 20 20 20 1075x75 20 20 20 20 20 20 20 20 10100x100 20 20 20 20 20 20 20 20 10

TMAS 720

Thickness (mm) 0,05 0,10 0,20 0,25 0,40 0,50 0,70 1,00 2,00


50x50 20 20 20 20 20 20 20 20 2075x75 20 20 20 20 20 20 20 20 20100x100 20 20 20 20 20 20 20 20 20125x125 20 20 20 20 20 20 20 20 20

TMAS 360A

Thickness (inch) 0.002 0.005 0.010 0.025 0.050 0.075

Size (inch) Quantities:

2x2 20 20 20 20 20 203x3 20 20 20 20 20 204x4 20 20 20 20 20 20

Contents TMAS shim kits

TMAS 340 TMAS 360

TMAS 510 TMAS 720

100-101

40



Double slot shims TMAS D series

Double slot SNL series* Pop Release unitsshims series

TMAS D3 series SNL 508-607 SYT 35SNL 509 SYT 40SNL 510-608 SYT 45SNL 208-307SNL 209SNL 210

TMAS D4 series SNL 511-609 SYT 50SNL 512-610 SYT 55SNL 211SNL 212

TMAS D5 series SNL 513-611 SYT 60SNL 515-612 SYT 65SNL 213SNL 215

TMAS D6 series SNL 516-613 SYT 70SNL 517 SYT 75SNL 216SNL 217

TMAS D7 series SNL 518-615SNL 519-616SNL 218

* Also suitable for the equivalent SNH series

Appropriate plummer block housings

ThermoPen TMTP 1

General purpose thermometerThe SKF TMTP 1 (˚C) and TMTP 1/F (˚F) are pocket-sized generalpurpose thermometers. The ThermoPen is a durable instrument with areplaceable probe tip. No maintenance person should be without one.

Compact size - fits into your pocket Replaceable probe tip High performance LCD display Resolution of 1 °C/˚F Versatile measurement range

(-30 to 200 °C/-22 to 392 °F) Auto power off function

Easy vertical positioning of plummer block housings

Suitable for different housing types (SNL, SNH, SYT)

Thickness and designation of the correspondinghousings are marked on each shim

Easy adjustment of the shaft axis height Shims suitable for several housings in accordance

with ISO 113, DIN 736 and JIS B 1551 Suitable for different attachment bolt positions

The SKF double slot shims are specially designed to allow accurateadjustment of bearing housings when aligning machinery. They are made of stainless steel and are suitable for a wide range of housings including the most popular.

For accurate bearing housing adjustment

101

101

41

Thermometer TMDT 900

The SKF TMDT 900 is a high quality, single channel thermometer offeringexcellent capabilities in a wide range of industrial and automotiveapplications. The instrument can be used with any of the fifteen SKF temperature probes.

Accurate fast measurements Wide temperature range

(-50 to 900 °C/-58 to 1,652 °F) Rugged construction

Low battery indication Switchable °C/˚F Wide probe selection (15 probes) Battery lifetime > 500 hours

Thermometer TMDT 2

The SKF TMDT 2 is a very high quality, dual channel thermometer incorporating a custom-designed micro-processor ensuring extreme measurement accuracy, over a wide temperature range. The instrument is available as a set complete with a fast response surface probe or in a single pack for use with any of the fifteen SKF probes.

Dual channel functions Very high accuracy (0,5 °C/0.9 °F) for

complete temperature range Automatic compensation for changing

ambient temperature Wide temperature range

(-200 to 1.350 °C/-328 to 2,462 °F) Audible bearing alarm

Analogue output for data logging Input for external power supply Wide probe selection (15 probes) Calibration certificate as standard HOLD, HOLD MIN and

HOLD MAX function Electronic self-test Application designed microprocessor

eliminates potentiometers

Single channel digital thermometer

Dual channel wide range thermometer

A Electronic self-checkB Probe connection T1C Probe connection T2D Temp. difference T1 - T2E Hold last readingF Hold maximum readingG Hold minimum readingH Switchable C/˚FI Low battery indicationJ Bearing alarm activatedK Broken probe connectedL Display illumination

A B C

D E F

G H I

J K L

TMDT 900A: TMDT 900 supplied complete with standard surface probe TMDT 2-30.

101

102

42



Designation Description

TMDT 2-30 Standard surface probeFor hard surfaces such as bearings, bearing housings, engine blocks,oven shields, etc.

TMDT 2-31 Magnetic surface probeFor hard, magnetic surfaces; the integral heat sink design and low massminimize thermal inertia and provide an accurate temperature measurement.

TMDT 2-32 Insulated surface probeFor hard surfaces where electrical wiring might cause short circuiting, e.g. electric motors, transformers, etc.

TMDT 2-33 Right angle surface probeFor hard surfaces in heavy duty applications, e.g. machine components, engines, etc.

TMDT 2-34 Gas and liquid probeFlexible shank made of stainless steel for liquids, oils, acids, etc. and at high temperature, e.g. open fire (not for molten metals).

TMDT 2-34/1.5 Gas and liquid probeSame as TMDT 2-34 but with thin shank and faster response time. Very flexible, specially suitable for measuring temperature of gases.

TMDT 2-35 Probe with sharp tipCan be easily inserted into semi-solid materials like food-stuffs, meat, plastic, asphalt, deep-frozen products, etc.

TMDT 2-35/1.5 Probe with sharp tipSame as TMDT 2-35 but with thinner shank and faster response time for insertion into soft solids.

TMDT 2-36 Pipe clamp probeFor temperature measuring on pipes, cables, etc. Diameter up to ø 35 mm (1.4 in).

TMDT 2-37 Extension cableFor use with all K-type probes. Special lengths are available on request.

TMDT 2-38 Wire probeThin, light weight, very fast response, fibreglass insulated.

TMDT 2-39 High temperature wire probeThin, light weight, very fast response, ceramic insulation.

TMDT 2-40 Rotating probeFor moving or rotating smooth surfaces. Four roller bearings provide suitable contact with the surfaces. Max. velocity 500 m/min.

TMDT 2-41 Non-ferrous foundry probeHolder including dip-element for molten, non-ferrous metals. Highly resistant to corrosion and oxidation at high temperatures.

TMDT 2-41A Dip-elementReplacement dip-element for TMDT 2-41.

TMDT 2-42 Ambient temperature probeFor measurement of ambient temperature.

TMDT 2-43 Heavy duty surface probeSame as TMDT 2-30 but with silicon encapsulated tip for heavy duty applications.

Dimensions (mm) Max. temp. Response time

900 °C 2,3 sec.1,650 °F

240 °C 7,0 sec.460 °F

200 °C 2,3 sec.390 °F

450 °C 8,0 sec.840 °F

1.100 °C 12,0 sec.2,010 °F

900 °C 6,0 sec.1,650 °F

600 °C 12,0 sec.1,110 °F

600 °C 6,0 sec.1,110°F

200 °C 8,0 sec.390 °F

300 °C 5,0 sec.570 °F

1.350 °C 6,0 sec.2,460 °F

200 °C 0,6 sec.390 °F

1.260 °C 30,0 sec.2,300 °F

1.260 °C 30,0 sec.2,300 °F

300 °C 3,0 sec.570 °F

130Ø 8

14

130Ø 8

250

250

250Ø 1,5

Ø 3

Ø 8

130Ø 3

130Ø 1,5

Ø 35 max.

10 metres

Ø 1,5

1.000

1.500

2,9 x 4,5

D ≥ 50 mm

1.000300

300

130Ø 8

K-type thermocouple probes

43

K-type thermocouple probes

SKF offers fifteen K-type thermocouple probes for use with SKF digitalthermometers TMDT 2 and TMDT 900.

Typical applications are: Surface measurements

(-30, -31, -32, -33) Gas and liquid measurements (-34) Semi solid materials (-35) Clamp for pipe measurements (-36) Rotating surface measurements (-40) Liquid non-ferrous metal

measurements (-41)

Ambient temperature measurements (-42)

Gas measurements - wire probes (-38, -39)

Heavy duty surface measurements (-43)

The SKF TMOT 1 is a high quality, accurate, single function, micro-processor controlled tachometer for optical orcontact measurement of rotational speed. The unit can be equipped with the optional remote sensor and contact adapter.The SKF TMOT 6 is a high quality, accurate, multi function micro-processor controlled optical tachometer. Equipped with a

range of accessories this instrument offers excellent speed measurementversatility - rpm, m/min or ft/min, cycles or revolution counting, measuring timebetween cycles and measuring total accumulated time. Available as an opticalinstrument only or as a complete set, both in a handy carrying case.

Tachometer TMOT series

High speed micro-processor control Single lens optical system Wide speed range (3 to 99.999 rpm) High resolution (0,001 at low speeds) High accuracy

(± 0,01 % ± 1 digit of reading) Contact adapter for rpm

and linear measurements High immunity to stray ambient light Easy to read LED display Versatility with 6 different measuring

modes (TMOT 6 only) Designations: TMOT 1 - TMOT 6

TMOT 6/SET - TMOT 6/LASER

Multi-function laser tachometer TMOT 6/LASER: Long optical range:

up to 2 metres (6.5 ft) Large angular range: ± 80° to target Clearly visible beam: easy target

location especially in conditions of strong ambient light

Ability to use surface imperfections asa target

Single and multi function optical tachometer

All probes can be used with the SKF digitalthermometers TMDT 2 and TMDT 900without recalibration.

Wide variety of thermocouple probes for many applications

TMOT 6/LASER

TMOT 6 TMOT 1

TMOT 6/SET

102

102

44



The SKF TMST 2 is a high quality, sensitive instrument enabling the determination oftroublesome machine parts by the detection of machine noises or vibrations. With the includedheadset, two different length probes, an adjustable sound level facility and a comparativeprerecorded demonstration tape, it is an ideal instrument for detecting troublesome machineparts or damaged bearings. The instrument, probes, headset anddemonstration tape are supplied complete in a sturdy carrying case.

User friendly Rugged construction Output for tape recording Pre-recorded demonstration tape

for comparisons Equipped with piezo-electric sensor

and adjustable volume control Sturdy sensitive headset Two probes as standard

Electronic stethoscope TMST 2

The OilCheck detects and measures the dielectric constant of oil. By comparing the measurements obtained fromused and unused oils of the same brand, the SKF OilCheck is able to determine the degree of change in the condition ofthe oil. Dielectric change is directly related to the degradation and the contamination level of the oil and will allow the user

to achieve optimised intervals between oil changes and detect increasedmechanical wear and loss of the oils lubricating properties. To facilitate trendingthe instrument is equipped with a numerical read-out.

OilCheck monitor TMEH 1

Please NoteThe SKF OilCheck is not an analytical instrument. It is an instrument to detect onlychanges in the oil condition. The visual and numerical read-outs are purely a guide toenable trending of the comparative readings of a good oil to a used oil of the same typeand brand.

Shows changes in oil conditionaffected by such things as: Water content Fuel contamination Metallic content Oxidation

Hand held and user friendly Numerical read-out to facilitate

trending

Detects changes in bearing condition

Detects changes in oil condition

102

103

45

SKF feeler gauges are designed to measure the internalclearance when adjusting spherical roller bearings. Two types are available, one with 13 blades of 100 mm (4 in) length and the other with 29 blades of 200 mm (8 in) length.

High accuracy of measurement 729865 A is supplied with protective

plastic cover 729865 B is supplied with protective

steel cage Also available in inch sizes

(designation: 729865 USA and 729865 USB)

CMPK 200 Package (English) includes: CMVP 40 (in/s, eq. peak – English)

Vibration Penplus with Carrying Case CMIN 400 Inspector 400 Ultrasonic

Probe with Headphones CMSS 2020 MicroTemp – Noncontact

Thermometer Batteries included VibCard Belt Holder for the Vibration Pen plus Comprehensive Quick Start

Instruction Card Rugged Carrying Case

CMPK 210 Package (Metric) includes: CMVP 50 (mm/s, RMS – Metric)

Vibration Penplus with Carrying Case CMIN 400 Inspector 400 Ultrasonic

Probe with Headphones CMSS 2020 MicroTemp –

Noncontact Thermometer Remainder of items same as the

CMPK 200 package

Feeler gauges 729865 series

Basic Condition Monitoring Package CMPK series

For accurate bearing clearance measurement

Check bearing and machine condition quickly and easily

Condition Monitoring and other SKF productsThe following products are not sold by SKF Maintenance Products. For pricing and technical details pleasecontact SKF Condition Monitoring or SKF Mekan for the TempGuard or your local SKF distributor.

An essential collection of monitoring tools that no industrial manufacturing plant should be without. Makes condition monitoring a simple task for maintenance, operations, reliability and vibration analysis departments.

103

46



TempGuard TMTM series

Prevent overheating with these SKF TempGuards. Designed with a memory metal spring system, a red pistongradually appears when the bearing reaches a specific temperature range.

The Vibration Penplus multi-parameter approach makes it the most powerful hand-held condition monitoring toolavailable. A Multi-Parameter approach to condition monitoring provides two different methods for monitoringmachinery condition. The Vibration Penplus is a Multi-Parameter vibration monitoring tool capable of measuringoverall vibration (caused by rotational and structural problems like imbalance, misalignment, looseness,etc.), and capable of acceleration enveloping measurements that measure vibration in higher frequencies(vibration caused by rolling element bearing or gearmesh problems). When performing measurements, the Vibration Pen’splus tool ’s sensor input signal isprocessed to produce both measurements for each machinery point, overall vibration and acceleration enveloping.

Early warning against overheating Low cost temperature

measuring device Easy to select and install Three temperature ranges available Clear visual signal Standard 1/8" NPT threading Fits all standard SNL and

SNH housings Adapters for 1/4" threaded

housings available (designation: TMTM 14NPT18)

Designation Temperature Colour Coderange

TMTM 50-60 50-60 °C / 122-140 °F GreenTMTM 60-70 60-70 °C / 140-158 °F YellowTMTM 70-80 70-80 °C / 158-176 °F Red

Three temperature range alternatives

Vibration Penplus CMVP series

So light and compact it fits in your shirt pocket Easy to operate Measures according to ISO 2372/VDI 2056 standards

A powerful combination for detection of machine and bearing defects

Early warning visual temperature device

103

47

Correct bearing lubrication for

Trouble-Free Operation 48

SKF sets the standard 48

Glossary of lubrication terms 49

SKF grease for all important bearing applications 52

Basic bearing grease selection 53

Quick bearing grease selection guide 53

SKF bearing grease comparison chart 54

SKF bearing greases 56

Gloves 59

Anti-fretting agent LAGF 3E 60

Rust inhibitor LHVI 1 60

Anti corrosive agent LHRP 1 60

L U B R I C A N T S

48

L U B R I C A N T S

L U B R I C A N T S

The value and importance of using the right bearing grease for the right application should not be underestimated. Grease as a lubricant deals with three of the four aspects of Trouble-Free Operation guidelines, and by selecting thecorrect SKF greases, you are assured of achieving maximum bearing life which translates into increased uptime and lower operating costs.

Why are SKF bearing greases so special?SKF, as a pioneer in designing and manufacturing bearings, has the best understanding of the lubrication needs of bearingsunder all operating conditions. SKF also understands that thequality of our bearings - which are world renouned - must beprotected by lubricants of equal quality. Extensive research,testing, and field experience are part of the formulation of all SKF bearing greases - this is your assurance that SKF greasesare the best that you can obtain on a consistent basis, anywherein the world. Correct grease application is a critical part ofmaintaining Trouble- Free Operation of your machinery.

Why is the right type of grease so important?Incorrect lubrication accounts for up to 50% of bearing failures.All purpose greases are inadequate for specialised bearingneeds and can cause problems rather than be beneficial. Bearing applications have wide variations of load, speed,temperature and environment, and correct lubrication calls formatching the grease precisely to the bearing application.

Correct bearing lubrication is an important part of your Trouble-Free Operation Programme

SKF sets the standard

SKF has developed internationally accepted bearing-related grease testing parameters which also resulted in the manufacture ofthese testing machines. The development of the most comprehensive quality control monitoring procedures ensures that each batchof grease manufactured on SKF’s behalf is to the same consistent quality and specification. SKF, at its Engineering Research Centre,uses the latest equipment available for performance testing, quality control, and research. This is the assurance to customers of the

SKF expertise in providing the right grease for the right bearing application.

Grease consistency/penetrationA measure of the stiffness of a grease. The consistency isclassified according to a scale developed by the NLGI (NationalLubricating Grease Institute). This is based on the degree ofpenetration achieved by allowing a standard cone to sink into the grease at a temperature of 25°C for a period of five seconds.The depth of penetration is measured on a scale of 10-1 mm andthe softer greases allow the cone to penetrate further into thegrease, hence the higher penetration number. The test method isin accordance to DIN ISO 2137.

49

Glossary of lubrication terms

Dead weight (gives light pressure on grease sample)

Sieve

Separated oil

Test for oil bleeding rate

DIN 51 817: determination of the % oil separated after one week at 40°C

NLGI ASTM worked Appearance at number penetration (10-1 mm) room temperature

000 445 - 475 very fluid00 400 - 430 fluid0 355 - 385 semi-fluid1 310 - 340 very soft2 265 - 295 soft3 220 - 250 medium hard4 175 - 205 hard5 130 - 160 very hard6 85 - 115 extremely hard

Classification of greases by NLGI consistency number

Drop pointThe drop point is the temperature at which the grease sample,when heated, will begin to flow through an opening and ismeasured according to DIN ISO 2176. The drop point does notrelate to the allowable operating service temperature of thegrease.

Melting pointThe melting point is the temperature at which the grease makesthe transition from a solid to a liquid state. This is normally at ahigher temperature than the drop point.

Base oil viscosityThe base oil is the oil inside the grease which provides thelubrication under the operating conditions. Viscosity is ameasure of a fluids flow characteristics and is usually expressedin terms of the time required for a standard quantity of the fluid, ata given temperature, to flow through a standard orifice. Sinceviscosity decreases with increasing temperature, the temperatureat which it is measured is always stated. The viscosity of baseoils is always indicated as a kinematic viscosity abbreviated tocSt, at 40 °C and often also at 100 °C.

Test for water resistance of greases

DIN 51 807: rating for degree of grease deterioration in water

Thin layer of grease on plate

Distilled water

Temperature controlled bath e.g. 90 ±1°C

Oil separationLubricating greases release oil when stored for long periods oftime or as a function of temperature. The degree of oil separationwill depend upon the thickener, base oil and manufacturingmethod. A cup is filled with a given quantity of grease (which isweighed before the test) and a 100 gram weight placed on top ofthe grease. The complete unit is put into an oven at 40°C for oneweek. At the end of the week the amount of oil which has leakedthrough the sieve is weighed and reported as a percentage ofweight loss. The amount of oil separation is measured inaccordance with DIN 51 817.

Water resistanceThe water resistance of lubricating greases is measured inaccordance with DIN 51 807 part 1. A glass strip is coated withthe candidate grease which is placed into a water filled test tube.The test tube is immersed in a water bath for three hours at aspecified test temperature. The change in the grease is evaluatedvisually and reported as a value between 0 (no change) and 3(major change) along with the test temperature.

Test for water resistance of greases

Glass or metal plate

50

L U B R I C A N T S

L U B R I C A N T S

Corrosion protectionLubricating greases should protect metal surfaces from corrosiveattack in service. The corrosion protection properties of rollingbearing greases is evaluated using the SKF Emcor method whichis standardised under ISO 11007. Under this test method amixture of lubricating grease and distilled water is present in thebearing. The bearing alternates during a defined test cyclebetween standstill and rotation at 80 rpm. At the end of the testcycle the degree of corrosion is evaluated according to a scalebetween 0 (no corrosion) and 5 (very severe corrosion). A moresevere test method is to use salt water to replace the distilledwater following the standard test procedure. In addition the testcan also be carried out by continuously allowing water to flow orwash through the bearing arrangement during the test cycle. This test method is called the SKF Distilled Water Washout Test.The evaluation procedure is exactly the same as that used underthe standardised method. However the procedure places greaterdemands on the corrosion protection properties of the grease.

Rolling bearing grease lifeThe SKF ROF grease test machine determines the grease life andhigh temperature performance limit of a lubricating grease. Ten deep groove ball bearings are fitted into 5 housings and filled with a given quantity of grease. The test is undertaken at apre-determined speed and temperature. Both an axial and radialload is applied and the bearings run until failure. The time tofailure is recorded in hours and a Weibull life calculation is made at the end of the test period to establish the grease life. This information can then be used in the determination of re-lubrication intervals in an application.

Mechanical stability Prolonged penetrationThe grease sample is filled into a cup and using an automaticdevice (called a grease worker) subjected to 100 000 doublestrokes. At the end of the test the penetration of the grease ismeasured. The difference between the measured penetration at60 strokes and after 100 000 strokes penetration is reported asthe change in 10-1 mm.

Roll stabilityThe consistency of a rolling bearing grease should not alter, or only slightly during the working life of the rolling bearing. The change in the grease structure (amount of softening orhardening) can be evaluated by filling a cylinder with a pre-specified quantity of grease. A roller is placed inside thecylinder and the complete unit is rotated for 2 hours at roomtemperature in accordance with ASTM D 1403. SKF modified the standard test procedure to reflect the application conditionsunder which the grease is used to either 72 or 100 hours at a testtemperature of 80 or 100°C. At the end of the test period thecylinder is allowed to cool to room temperature and thepenetration of the grease is measured. The difference betweenthe original penetration and the value measured is reported as the change in penetration in 10-1 mm.

SKF V2F testThe candidate grease is tested for mechanical stability using thefollowing procedure. The test rig consists of a railway axleboxsubjected to vibration shocks of 1Hz from a bouncing hammerproducing an acceleration level between 12-15 g. The test is run at two different speeds, 500 and 1 000 rpm. If the grease,which leaks from the housing through the labyrinth seal which iscollected in a tray after 72 hours at 500 rpm, weighs less than 50 grams the test is continued for a further 72 hours at 1 000 rpm.If the total amount of grease leakage after both tests (72 hours atboth 500 and 1 000 rpm) does not exceed 150 grams then arating of ‘M’ is given. If the grease only fulfils the first part of thetest (72 hours at 500 rpm with a grease leakage of 50 grams orless) but fails the second stage, a rating of ‘m’ is given. If the grease leakage after 72 hours at 500 rpm is greater than 50 grams then it is rated a ‘fail’.

Glossary of lubrication terms

Shear strengthShear strength is the maximum shear stress that is possible totransmit through a grease without the onset of grease flow.Grease being a semi-solid material can transmit a shear stressalso with the shear strain rate zero. The shear strain rate zerogrease can be kept on different surfaces of bearings andhousings. This is an important parameter when pumping greases through pipes in a centralised lubricating system.

Shear stabilityThe ability of a lubricating grease to resist the changes inconsistency during mechanical working. The working may be aresult of either laboratory tests or in actual service. This is alsocalled mechanical stability.

4-Ball weld loadThe 4-ball weld load test method evaluates the EP (ExtremePressure) performance of a lubricating grease. This test methodis standardised under DIN 51 350/4. Three steel balls are held in acup and another fourth ball is rotated against the three balls at agiven speed. A starting load is applied and increased at pre-determined intervals until the rotating ball siezes and welds to thethree stationary balls. The test indicates the point at which theextreme pressure limit of the grease is exceeded.

Thickener or soapThickener or soap is the system which holds the oil and/oradditives together to enable the lubricating grease to function.The thickener system is formed from either soaps or non-soaps.The type of thickener gives the grease its typical characteristics.Soaps are based on lithium, calcium, sodium, barium, oraluminium. Non-soaps are based on organic or non-organicsolids, bentonite clay, polyurea, silica gel.

AdditivesAdditives are used to provide additional characteristics such aswear and corrosion protection, friction reducing effects andpreventing damage under boundary and mixed lubricationconditions.

Lubricating abilityThe SKF R2F machine assesses the high temperatureperformance and lubricating ability of a grease, simulating theconditions under which large size bearings operate in housings.The test method is carried out under two different conditions.Test A is conducted at ambient temperature and Test B isconducted at 120°C. A pass rating in the unheated test (Test A)means that a grease can be used to lubricate larger rollingbearings at normal operating temperatures and also in lowvibrating applications. A pass in the heated test (Test B) at 120°Cmeans that the grease is suitable for use in large roller bearingsoperating at elevated temperatures.

51

52

L U B R I C A N T S

L U B R I C A N T S

SKF grease for all important bearing applications

Special bearing greasesStandard bearing greases

Agricultural equipment Automotive wheel bearings

Conveyors Small electric motors

All purpose bearing grease for a wide range ofindustrial and automotive applications Agricultural and forestry equipment

Construction and earthmovingequipment

Mining and conveying equipment Water treatment and irrigation Turf, lawn, golf equipment

Locks, dams, bridges Linkages, rod ends Pleasure craft propellers and shafts Other applications where

contamination of the environment is a concern

Green biodegradeble low toxicity bearing grease

Pulp and paper making machines Jaw crushers

Traction motors for rail vehicles Dam gates

EP bearing grease for a wide range of industrial and automotive applications

Textile spinning spindles Machine tool spindles Instruments and control equipment

Small electric motors used inmedical and dental equipment

Low temperature bearing grease for high speedand low noise applications

Bakery equipment Food processing equipment Multipack cassette bearings

Wrapping machines Conveyor bearings

Food processing bearing grease USDA H1

Electric motor bearings Ventilation fans running

continuously at over 80 °C

Clutch release bearings Kiln trucks and rollers

High temperature and low noise bearing grease

Electric motors Hot fans Water pumps Rolling bearings in textile, paper

processing and drying machines

Applications with high speed ballbearings operating at medium andhigh temperatures

High performance, wide temperature, long life, high speed polyurea thickened bearing grease

Machine tool spindles Textile spinning spindles

Low temperature bearing grease for high speed andmedium load applications

Wheel bearings in cars and trucks

Washing machines Electric motors

Wide temperature, long-life bearing grease

Steel on steel plain bearings Pulp and paper making machines Asphalt vibrating screens Continuous casting machines

Sealed spherical roller bearingsoperating up to 150 °C/300 °F

Withstands peak temperatures of 200 °C/392 °F

EP bearing grease for high temperature industrial applications

Rolling element bearings running atlow speed and very high loads

Jaw crushers Track laying machines

Lift mast wheels Building machines such as

mechanical rams, crane arms,crane hooks

EP bearing grease with molybdenum disulphidefor industrial and heavy equipment

Trunnion bearings on rotating drums

Support and thrust rollers on rotary kilns and dryers

Bucket wheel excavators Slewing ring bearings High pressure roller mills

EP bearing grease with molybdenum disulphide forheavy industrial applications

Windmills Screw conveyors

EP bearing grease for low temperature applications

Bearings >100 mm shaft size Outer ring rotation Vertical shaft applications

Continuous high ambient temperatures >35 °C

Propeller shafts

All purpose bearing grease for a wide range ofapplications like LGMT 2 where higher consistency is required

LGMT 2

LGMT 3

LGEP 2

LGLT 2

LGHP 2

LGHQ 3

LGFP 2

LGGB 2

LGWA 2

Bakery equipment (ovens) Hot fans Kiln truck wheels Load rollers in copying machines

Any applications operating underextremely high temperature and/orin aggressive environments

Extreme temperature, high performance, long life,fluorinated bearing greaseLGET 2

LGLC 2

LGHB 2

LGEM 2

LGEV 2

LGWM 1

53

LGFP 2

LGGB 2

LGEP 2

LGWM 1

LGHB 2

LGEM 2

LGEV 2

LGHB 2

LGLT 2

LGLC 2

LGHP 2

LGHQ 3

LGHB 2

LGWA 2

Main additional properties Grease recommended

LGMT 3

LGMT 2

Temp Speed Load

M M M

M M M+H

M L H

M L H

M L H

M VL VH

M VL VH

M VL VH

L EH L

L+M EH M

M+H M+H M

H H M

H L+M H

H L+M M+H

Temperature

Speed for ball bearings

Load

Speed for roller bearings

Note: - For areas with relatively high ambient temperatures, use LGMT 3 instead of LGMT 2- For special operating conditions, refer to the range of special SKF bearing greases

EH = Extremely High n.dm over 700 000VH = Very High n.dm up to 700 000H = High n.dm up to 500 000M = Medium n.dm up to 300 000

H = High n.dm over 150 000M = Medium n.dm up to 150 000L = Low n.dm up to 75 000VL = Very Low n.dm below 30 000

M M M

M M M

Biodegradable, low toxicity, EP/anti-wear

EP/anti-wear, good corrosion inhibition

EP/anti-wear, good low temperature performance, anti-brinelling

EP/anti-wear, severe vibrations, anti-brinelling, water resistance

Excellent EP/anti-wear (solid additives), high viscosity

Excellent EP/anti-wear (solid additives), extremely high viscosity

Extremely good EP, anti-brinelling, water resistance

Quiet running, very low start-up temperature

EP/anti-wear, very low start-up temperature

Excellent corrosion protection, water resistance, long grease life

Quiet running, leakage resistant, long grease life

Extremely good EP, anti-brinelling, water resistance

EP/anti-wear, leakage resistant, water resistance

General purpose for small/medium-sized bearings

General purpose for larger bearings (or high ambient temp.)

Food compatible

Quick bearing grease selection guide

n.dm= rotational speed, r/min x 0,5 (D+d), mm

LGMT 2Generally use

LGHP 2Expected bearing temperature continuously > 100 C/212 F High temperature

LGLT 2Low ambient -50 C/-85 F, expected bearing temperature < 50 C/122 F Low temperature

LGEP 2Shock loads, heavy loads, vibrations High load

LGFP 2Food processing industry Food processing

LGGB 2'Green' biodegradable, demands for low toxicity Green biodegradable

Basic bearing grease selection

All purpose

Unless:

Note: For bearing temperatures > 200 ºC / 392 ºF (up to 260 ºC / 500 ºF) refer to LGET 2, page 58

VH = Very high C/P < 2H = High C/P = 2-5M = Medium C/P = 5-10L = Low C/P > 10

M = Medium -30 to 110 C/-22 to 230 FH = High -20 to 130 C/-4 to 266 FL = Low -50 to 80 C/-58 to 176 F

Bearing operating parameters

54

L U B R I C A N T S

L U B R I C A N T S

LGFP 2

LGHP 2

LGMT 2

LGMT 3

LGEP 2

LGLT 2

LGHQ 3

LGGB 2

LGLC 2

LGWA 2

LGHB 2

LGEM 2

LGEV 2

LGWM 1

Bearing workingconditions

High temperatureabove 120 °C

Low temperature Very high speed Very low speedand/or oscillatingmovements

Low torque and friction

Severe vibration Heavy load

SKF bearing grease comparison chart

Standard bearing greases

Not suitableSuitableRecommended

Where no symbol is indicated the relevant grease may be used - however it is not recommended. For further information please contact SKF.

Special bearing greases

55

All purpose industrialand automotive

-30/120 ºC-22/250 ºF

Lithium soap/mineral oil

110 35, 200 g tube, 420 ml cartridge,1, 5, 18, 50, 180 kg

All purpose industrialand automotive

-30/120 ºC-22/250 ºF


120-130 420 ml cartridge, 1, 5, 18, 50, 180 kg

Extreme pressure -20/110 ºC-4/230 ºF


200 420 ml cartridge, 1, 5, 18, 50, 180 kg

Low temperature -55/110 ºC-65/230 ºF

Lithium soap/di-ester oil

15 200 g tube, 1, 180 kg

High performancepolyurea grease

-40/150 ºC-40/300 ºF

Di-urea/mineral oil 96 420 ml cartridge, 1, 5, 18, 50, 180 kg

High temperature -20/150 ºC-4/300 ºF

Lithium complex soap/mineral oil

110 420 ml cartridge, 1, 5, 18, 50, 180 kg

Food compatible -20/110 ºC-4/230 ºF

aluminium complex/medical white oil

130 420 ml cartridge, 1, 18, 180 kgSYSTEM 24

‘Green’biodegradable low toxicity

-40/120 ºC (*2)-40/250 ºF

Lithium-calcium soap/synthetic ester oil

110 420 ml cartridge5, 18, 180 kgSYSTEM 24

Low temperature highspeed

-40/120 °C-40/250 ºF

Calcium complexsoap/ester-mineral oil

24 200 g tube,1, 180 kg

Wide temperature(*3)

-30/140 °C-22/284 ºF

Lithium complex soap/mineral oil

185 35, 200 g tube, 420 ml cartridge, 1, 5, 50, 180 kgSYSTEM 24

EP high viscosity hightemperature (*4)

-20/150 °C-4/300 ºF

Complex calciumsulphonate/mineral oil

400-450 420 ml cartridge, 5, 18, 50, 180 kgSYSTEM 24

High viscosity plus solidlubricants

-20/120 °C-4/250 ºF


500 420 ml cartridge, 5, 18, 180 kgSYSTEM 24

Extremely high viscositywith solid lubricants

-10/120 °C-14/250 ºF

Lithium-calcium soap/mineral oil

1.020 35 g tube,420 ml cartridge5, 18, 50, 180 kg

Extreme pressure low temperature

-30/110 °C-22/230 ºF


200 420 ml cartridge, 5, 50, 180 kg

Rust inhibitingproperties

Water resistance Description Temperature range Thickener/ base oil

Base oil viscosity (*1)

Available pack sizes

Technical specifications

(*1) mm 2/s at 40 °C/104 º F = cSt.(*2) For continuous operation: max. temperatures 90 ºC/194 ºF(*3) LGWA 2 can withstand peak temperatures of 220 °C/428 ºF (*4) LGHB 2 can withstand peak temperatures of 200 °C/392 ºF

56

L U B R I C A N T S

L U B R I C A N T S

LGMT 2

SKF all purpose industrial and automotive bearing grease

LGMT 2 is a premium quality, all purpose grease for a wide range of industrial and automotive applications.

It is mineral oil based with a lithium soap offering: Excellent oxidation stability Good mechanical stability Good rust inhibiting properties

LGMT 3SKF all purpose industrial and automotive bearing grease

LGMT 3 is a premium quality, all purpose grease for awide range of industrial and automotive applications.It is mineral oil based with a lithium soap offering: Extremely long grease life Excellent oxidation stability Good mechanical stability Good water resistance Good rust inhibiting properties

LGEP 2

SKF extreme pressure bearing grease

LGEP 2 is a premium quality, mineral oil based grease usinga lithium soap and containing extreme pressure additives.

This grease offers: Reduced wear under severe operating conditions Extremely quiet running Good lubrication under high load and low speed Excellent oxidation stability Excellent water resistance Good rust inhibiting properties

LGLT 2

SKF low temperature bearing grease

LGLT 2 is a premium quality, synthetic ester oil basedgrease using a lithium soap. Because the synthetic oil isonly moderately influenced by temperature LGLT 2 canbe used in temperatures as low as -55 °C (-65 °F). Thisgrease is used in the pre-filling of SKF bearings underthe product designation LT20.

This grease offers: Excellent grease life Excellent low temperature lubrication properties Excellent lubrication of bearings at high speed and low load Good corrosion resistance

35 g tube200 g tube

420 ml cartridge1 kg can

5 kg can18 kg can

50 kg drum180 kg drum

420 ml cartridge

1 kg can

5 kg can18 kg can



5 kg can18 kg can

50 kg drum180 kg drum 200 g tube 1 kg can 180 kg drum

Available pack sizes LGMT 2

Available pack sizes LGEP 2 Available pack sizes LGLT 2

Available pack sizes LGMT 3

104-105 104-105

104-105 104-105

57

LGHP 2

SKF high performance bearing greaseLGHP 2 is a premium quality grease, mineral oil basedusing Polyurea (di-urea) thickener. It has excellentlubrication properties for a wide temperature range from -40 °C (-40 °F) up to 150 °C (302 °F).

This grease offers: Extremely long life at high temperature Wide temperature range Excellent corrosion protection High thermal stability Good low temperature start-up performance Compatibility with common Polyurea greases Compatibility with lithium complex thickened greases

LGHQ 3

SKF high temperature bearing greaseLGHQ 3 is a premium quality, mineral oil based greaseusing a lithium complex soap. It has excellent lubricationproperties when the bearing temperature is constantlyover 80 °C (176 °F). LGHQ 3 was developed specificallyfor bearings required to run extremely quiet. It is used inthe pre-filling of SKF bearings under the productdesignation HT22 VU082.

This grease offers: Long service life at higher operating temperatures Excellent lubrication at operating temperatures above

80 °C (176 °F) up to 150 °C (302 °F) Good water resistance Good corrosion inhibiting properties Extremely quiet running exceeding today’s

industry standards

LGFP 2

SKF food compatible bearing grease

LGFP 2 is a clean, non-toxic, non-staining, mineralhydrocarbon free grease which is based on a vegetableoil using a calcium soap. This is formulated using onlyFDA* tested ingredients and is authorised by the USDA**for category H1*** service.

This grease offers: Compliance with all existing legislation on food protection High resistance to water washout making it suitable for

applications subject to frequent wash down Good load carrying characteristics resulting in reduced

bearing wear Excellent corrosion resistance An essentially neutral pH value

LGGB 2

SKF green biodegradable bearing grease

LGGB 2 is a biodegradable, low toxicity grease,synthetic ester oil based using a lithium-calciumthickener. It has excellent lubrication properties for a wide range of applications operating under different conditions.

This grease offers: Compliance with current regulations on toxicity

and biodegradability Good performance in applications with steel-on-steel

spherical plain bearings, ball bearings and roller bearings Good low temperature start-up performance Good corrosion inhibiting properties Suitable for medium to high loads


5 kg can18 kg can



5 kg can18 kg can


SYSTEM 24 420 ml cartridge1 kg can 18 kg can 180 kg drum

SYSTEM 24 420 ml cartridge 5 kg can

18 kg can 180 kg drum

Available pack sizes LGGB 2

Available pack sizes LGHQ 3Available pack sizes LGHP 2

Available pack sizes LGFP 2

104-105 104-105

104-105 106-107

NEW

NEW

* FDA - Food and Drug Administration** USDA - United States Department of Agriculture*** H1 - Incidental Contact with Food

58

L U B R I C A N T S

L U B R I C A N T S

LGHB 2

SKF high viscosity, high temperature bearing grease

LGHB 2 is a premium quality, high viscosity, mineral oilbased grease using the latest complex calcium,sulphonate soap technology. This grease contains noadditives and the extreme pressure characteristics arecreated within the soap structure.

This grease offers: Extremely long grease life High temperature performance up to 200 °C (390 °F)

for short periods Excellent mechanical stability Excellent lubrication properties for heavily loaded medium

rotating bearings

LGET 2

SKF extreme temperature bearing grease

LGET 2 is a premium quality, synthetic fluorinated oilbased grease using a PTFE thickener. It has excellentlubrication properties at extremely high temperaturesexceeding 200 ºC (392 ºF) up to 260 ºC (500 ºF).

This bearing grease offers: Long life in aggressive environments such as very reactive

environments or areas with a presence of high puritygaseous oxygen, hexane and so on

Excellent oxidation resistance Good corrosion resistance Excellent water and steam resistance

LGWA 2

SKF wide temperature range bearing grease

LGWA 2 is a premium quality mineral oil based lithiumcomplex grease. LGWA 2 has such properties that it canbe recommended for a wide range of industrial andautomotive applications.

This grease offers: Excellent lubrication at peak temperatures up to 220 °C

(428 °F) for short periods Protection of wheel bearings operating under

severe conditions Effective lubrication in wet conditions Good water and corrosion resistance Excellent lubrication under high loads and low speeds

LGLC 2

SKF low temperature, high speed bearing grease

LGLC 2 is a premium quality, synthetic ester-mineral oil based grease using a calcium complex soap. The product’s construction ensures that the bearingoperates constantly at a lower operating temperature.

This grease offers: Extremely long grease life Very good low temperature lubrication properties Excellent lubrication of bearings at extremely high speed

and medium load Excellent water resistance

200 g tube 1 kg can 180 kg drum

SYSTEM 24

35 g tube

200 g tube

420 ml cartridge

1 kg can

5 kg can

50 kg drum

180 kg drum

SYSTEM 24 420 ml cartridge 5 kg can

18 kg can

50 kg drum

180 kg drum

50 g (25 ml) syringe

Available pack sizes LGET 2

Available pack sizes LGWA 2

Available pack sizes LGHB 2

Available pack sizes LGLC 2

106-107

106-107

106-107

106-107

NEW

Important note: Fluorinated greases in general are very costly,however the SKF LGET 2 is competitively priced. Given thatLGET 2 is more expensive than other SKF greases, it istherefore recommended to use it only for applications whereother SKF greases would not provide the required performance.

Gloves

59

LGEV 2

SKF extremely high viscositybearing grease with solid lubricants

LGEV 2 is a premium quality, extremely high viscosity,mineral oil based grease using a lithium-calcium soapcontaining molybdenum disulphide and graphite.

This grease offers: Excellent lubrication properties for heavily loaded bearings

subject to oscillating conditions or slow rotation Extremely good mechanical stability Excellent EP performance without the use of lead additive Good water resistance Good rust inhibiting properties

LGWM 1

SKF extreme pressure low temperature bearing grease

LGWM 1 is a mineral oil based grease using a lithiumsoap and containing extreme pressure additives. It is extremely suitable for the lubrication of bearingsoperating under both radial and axial loads e.g. transport screws.

This grease offers: Good oil film formation at low temperatures

down to -30 °C (-22 °F) Good pumpability at low temperature Good corrosion protection Good water resistance

35 g tube 420 ml cartridge 5 kg can

18 kg can

50 kg drum

180 kg drum

420 ml cartridge 5 kg can 50 kg drum

180 kg drum

Non-powdered nitrile rubber gloves Close fitting for precision wear Excellent resistance against

bearing greases Non-allergic

Disposable grease resistant gloves TMBA G11D

Washable and quick drying Lint free Very flexible Bearing grease resistant Breathable

Reusable grease resistant gloves TMBA G11R

Specially designed to protect the skin when workingwith SKF bearing grease. The gloves are packed in ahandy box containing 50 pairs.

Specially designed to protect the skin when workingwith SKF bearing greases. The gloves are made of a special material to obtain a unique combination of features.

Available pack sizes LGEV 2

Available pack sizes LGWM 1

LGEM 2

SKF high viscosity bearing grease with solid lubricants

LGEM 2 is a premium quality, high viscosity, mineral oilbased grease using a lithium soap containingmolybdenum disulphide and graphite.

This grease offers: Good lubrication under high load and slow rotation Safe lubrication conditions due to the inclusion of

molybdenum disulphide and graphite Extremely good EP characteristics Very good oxidation stability Good water resistance

SYSTEM 24 420 ml cartridge 5 kg can18 kg can 180 kg drum

Available pack sizes LGEM 2

106-107 106-107

106-107 108

60

L U B R I C A N T S

L U B R I C A N T S

Anti corrosive agent

SKF anti corrosive agent LHRP 1

SKF LHRP 1 provides excellent long term corrosion protection to ferrous and non-ferrousmetals. When applied, it leaves a stable rust protection film over the metal component.

This product offers: Excellent rust protection in high

humidity environments (tests at 30 °C/80 °F - 90% relative humidityindicates full protection for at least one year)

Excellent long-term indoor storage protection

Rust inhibitor

SKF rust inhibitor LHVI 1SKF LHVI 1 is a rust inhibiting agent which creates a vapour that coats and protects surfaces from corrosion. It can beadded to lubricating oil to improve corrosion protection particularly in machines that are stored or idle for some time.Suitable for use on external components where a tacky film is acceptable, for example, castings, pumps, valves and compressors.

This product offers: Optimal corrosion protection in outdoor

environments (up to 24 months) Minimum surface preparation due to good

adherence properties Good moisture and water

displacing properties Prevents galvanic corrosion between

dissimular metals Universal protection for ferrous and

non-ferrous metals and alloys Compatible with both mineral and

synthetic oils

Temporary rust preventive coating due to easy removal

Ideal protection for mothballed equipment inrefineries, power and chemical plants

Protection of metal components betweenprocessing or machining steps

Ease of application either by spray, brush, or dipping

Preventive maintenance products

SKF anti-fretting agent LGAF 3ESKF LGAF 3E is a greasy, smooth paste especially developed to prevent fretting corrosion between metalsurfaces in loose fit arrangements. Fretting corrosion is caused by very slight oscillations or by vibrations whichmay lead to serious damage in bearings and other machine parts and can make dismounting almost impossible.

This product offers: Reduction of fretting corrosion

providing easier dismounting of bearings

Ensured sliding on designed loosebearing arrangements such asvibrating screens, truck and car wheelbearings

Easier removal of general industrialcomponents in a wide range ofapplications such as nuts, bolts,flanges, studs, bearings, guide pins,couplings, jack screws, lathe centres,push rods, and spline shafts

108

108

108

NEW

61

Correct bearing lubrication is essential

to long bearing life 62

SYSTEM 24 single-point automatic lubricator

LAGD 125 and LAGD 60 63

DialSet Re-lubrication Calculation Program 64

Accessories support usage of SYSTEM 24 65

SYSTEM MultiPoint automatic lubricator

LAGD 400 66

Oil Leveller LAHD series 67

Grease packer LAGP 400 67

Grease gun 1077600 68

One hand operated grease gun LAGH 400 68

Grease filler pumps LAGF series 69

Grease pumps LAGG series 69

Lubrication accessory sets 70

Grease meter LAGM 1000 70

L U B R I C A T O R S

62



Choosing the right bearing grease for the right application is critical to bearing performance. Incorrect lubricationaccounts for up to 50% of bearing failures. Conditions such as load, speed, temperature and environmentdetermine the type of grease you need for each application. Equally important to choosing the right grease is to inject the correct quantity of grease at the right intervals. Over-greasing can have detrimental effects on the life of a bearing and will contribute to machine downtime and early failure.

Correct bearing lubrication is essential to long bearing life

SKF lubricators are the solution

SKF offers you two types of lubrication equipment: manual and automatic. Both methods are designed for ease-of-use and ensure there is no risk of contaminants into the grease. In addition, they enable users to control the amount of greaseused in each application. When manually applied with SKFgrease guns and pumps, bearings can be lubricated before and during operation. With SKF automatic lubricators such asSYSTEM 24 or SYSTEM MultiPoint, the correct amount of greaseis applied 24 hours per day, 7 days per week, 52 weeks per year,should you choose. Simply set the automatic timer on the unitsand lubrication takes care of itself.

To assist you with determining the right amount of grease for your specific application, SKF has developed DialSet, a simplecomputerized relubrication calculation program which helps youdecide which time setting is right for you. The program isavailable in six languages on diskette and is compatible with most PCs.

63

SYSTEM 24 single-point automatic lubricator LAGD 125 and LAGD 60

Automatic lubrication, where you want it, 24 hours a day, 7 days a week

Any bearing deprived of correct lubrication will fail well within its predicted lifespan. With that fundamental engineering principle in mind SKF has introduced SKF SYSTEM 24, a new generation of automatic lubricators that bridge the conflicting interests of commercial need and environmental pressures.

Practical benefitsSKF SYSTEM 24 sets new standards inlubrication management and efficiency:

Reliability - allowing fit and forgetprocedures until predetermined replacement time

Transparent container to check lubricant levels

High capacity, compact size permitsinstallation in restricted areas

Dispense rate setting is a simple partof the installation process

Can be temporarily deactivated Reduced inventory cost as one

lubricator covers all time settings Hermetic sealing prevents ingress

of dirt or foreign matter No harmful chemicals to generate

the drive gas Wide range of accessories are

available e.g. adapter nipples, tubes and brushes

LAGD 60, the 60 ml version of SYSTEM 24The LAGD 60 is the 60 ml version ofSYSTEM 24 and is suitable for the sameapplications as the LAGD 125 and isespecially suited for applications where:

Space is limited: the unit is only 74 mmhigh which is 35% shorter than thestandard unit

Lower grease purge is required: lowest possible purge for LAGD 60 is 4,5 g (0.15 oz)/month, for LAGD 125the lowest is 9 g (0.31oz)/month

The DialSet program recommendsLAGD 60: there is a special calculationfunction for the LAGD 60 in the DialSet program


LAGD 125/WA2 125 ml (4.25 fl oz. US) unit filled with LGWA 2 greaseLAGD 60/WA2 60 ml (2 fl oz. US) unit filled with LGWA 2 greaseLAGD 125/HB2 125 ml (4.25 fl oz. US) unit filled with LGHB 2 greaseLAGD 125/FP2 125 ml (4.25 fl oz. US) unit filled with LGFP 2 greaseLAGD 125/GB2 125 ml (4.25 fl oz. US) unit filled with LGGB 2 greaseLAGD 125/HMT68 125 ml (4.25 fl oz. US) unit filled with mineral EP type chain oil (viscosity ISO 68)LAGD 125/HHT265 125 ml (4.25 fl oz. US) unit filled with synthetic high temperature chain oil (viscosity ISO 265)LAGD 125/HFP120 125 ml (4.25 fl oz. US) unit filled with food processing type oil (viscosity ISO 120)

Ordering details

108

64



DialSet Re-lubrication Calculation Program

DialSet is a calculation program which easily determines the right time setting for your SYSTEM 24 and SYSTEMMultiPoint applications. In addition it recommends when to use LAGD 125 and when to use the LAGD 60. Available on diskette in six languages.

Determines the right time setting for your SYSTEM 24 and SYSTEMMultiPoint applications

Advises when to use LAGD 125 and when to use LAGD 60

Based on SKF General Catalogue,operating conditions and SYSTEM 24and SYSTEM MultiPoint greasedispense rate

Available on diskette and suitable for PC's working with MS Windows 95 or later

Available in English, French, German,Swedish, Spanish and Italian

PumpsLong term lubrication for pumps andcompressors with SKF SYSTEM 24; safe, clean, cost effective.

Chain drivesProduction and mechanical handling plantthroughout industry relies on consistentlubrication.

VehiclesRoad and rail transport - kept movingdespite dirt and dust, damp and extremesof temperature.

FansFans and impellers turning all day, all night,in factories producing everything from foodto paper and from cement to plastics.

CranesDifficult to reach applications like cranesheaves can be handled cost effectivelywith SKF SYSTEM 24.

Pump application Gearbox linkage arm application

For accurate calculation of re-lubrication intervals

A

B

C

D

E

F

G

H

A Lubricator time set dial Allows easy and accurate adjustment of lubrication flow

B Gas cellPatented cell design ensures controlled production of hydrogen gas

C Hydrogen gas Build up of gas dispenses lubricant consistently

D Special piston shapeEnsures optimum emptying of lubricator

E Transparent container Allows visual checking of dispense rate

F High performance SKF greaseAvailable with various SKF greases

G Profiled baseMatches piston profile

H Cartridge neck Screws into lubrication point or accessories

65

Accessories support usage of SYSTEM 24

SYSTEM 24 accessories make it easy to install units and to increase time setting or grease purge. Enables usage ofSYSTEM 24 on additional applications where continuous lubrication is needed such as chains, guiding systems, elevators and so on.

For installation:Range of connectors, angle adapters, clamps, tubes and so onenable usage in many different situations.

For time setting:2 point (Y) connector and the 4-point manifold provide moreflexibility in terms of time setting.

For application:For non-bearing applications; oil brushes for chains and elevatorslides are available.

Note:In elevator slide applications use LAPB 5-16 with LAGD 125/MT68 or LAGD 125/ HHT265, depending on the previously usedoil (mineral or synthetic) in the application.

Wide range of accessories for various applications


* Suitable for use with oil filled SYSTEM 24 units only

LAPA 45 Angle connection 45˚LAPA 90 Angle connection 90˚LAPB 3X4E* Lubrication brush 3 x 4 cmLAPB 3X7E* Lubrication brush 3 x 7 cmLAPB 3X10E* Lubrication brush 3 x 10 cm

LAPB 5-16* Lift rail lubrication brushLAPB D2* Lubrication brush; round, diameter 2 cmLAPC 50 ClampLAPE 35 Extension 35 mmLAPE 50 Extension 50 mm

LAPF F1/4 Tube connection female G 1/4LAPF M1/4 Tube connection male G 1/4LAPF M1/8 Tube connection male G 1/8LAPF M3/8 Tube connection male G 3/8LAPG 1/4 Grease nipple G 1/4

LAPM 1x1 Mounting bracket, singleLAPM 1x3 Mounting bracket, tripleLAMP 1x5 Mounting bracket, fivefoldLAPM 2 Y-connectionLAPM 4 4 to 1 manifold G 1/2

LAPN 1/8 Nipple G 1/4 - G 1/8 LAPN 1/2 Nipple G 1/4 - G 1/2LAPN 1/4 Nipple G 1/4 - G 1/4LAPN 3/8 Nipple G 1/4 - G 3/8LAPN 6 Nipple G 1/4 - M6

LAPN 8 Nipple G 1/4 - M8LAPN 8X1 Nipple G 1/4 - M8x1LAPN 10 Nipple G 1/4 - M10LAPN 10X1 Nipple G 1/4 - M10x1LAPN 12 Nipple G 1/4 - M12

LAPN 12X1.5 Nipple G 1/4 - M12x1,5LAPP 1 Dust protection cabLAPP 2 Protection baseLAPP 3 Protection coverLAPT 1000 Flexible tube, 1 000 mm (39.4 in) long

LAPV 1/4 Non return valve G 1/4LAPV 1/8 Non return valve G 1/8

SYSTEM 24 accessories

66



SYSTEM MultiPoint automatic lubricator LAGD 400

The lubrication of bearings with the correct type and quantity of grease is essential for trouble-freeoperation. Research has shown that 36% of all bearings fail prematurely due to incorrect lubrication.Especially for installations with multiple lubrication points, this can be a time-consuming and costlyprocess. SYSTEM MultiPoint, SKF's new centralised automatic lubricator, is the most user-friendly and cost-effective automatic lubricator for multiple grease lubrication points available today. Its compact design, combinedwith electronically controlled accuracy, makes it an excellent solution for longer bearing-life and increased uptime ofyour machinery.

Being a do-it-yourself lubrication system, SYSTEM MultiPoint can be easily installed without the assistance of acostly lubrication service company and requires no special training to use. Once the correct grease dispense ratefor your application is calculated using DialSet, SKF's re-lubrication calculation program, SYSTEM MultiPoint willkeep up to eight lubrication points simultaneously and automatically lubricated, preventing both over and under-greasing. The transparent cartridge housing allows for easy inspection, while an electronic alarm will warn you whenthe grease cartridge is empty.

Advantages: Do-it-yourself centralised

lubrication system Up to 8 feed lines Easy-to-use DialSet included: SKF's re-lubrication

calculation program allowing accuratecalculation of the correct re-lubrication intervals

Long feed lines (maximum up to 5 m/16 ft)

Electronic setting and read-out ofcontrol parameters

Alarm function for blocked feed linesand empty cartridge

Machine steering (i.e. lubricator onlyoperates while machine is running)

High pressure capability (40 bar / 600 psi)

Tested and approved with all SKF greases

Uses standard SKF grease cartridges (420 ml)

Ready for use, all accessories included

Multiple grease lubrication points made easy

NEW

108

Patent pending

67

NEW

Grease packer LAGP 400

To lubricate open bearings

Supplied with three spout caps Applies grease to open

applications such as bearings oropen gears

Oil Leveller LAHD series

SKF Oil Levellers, LAHD 500 and LAHD 1000, are designed forautomatic adjustment of the optimal oil lubrication level within abearing housing, gear box, crank case or similar oil bath lubricationapplication. Not usually possible, SKF Oil Levellers allow you to effectivelyadjust the correct oil level during running conditions, optimising machineperformance and increasing the service life of the applications. Furthermore,they automatically compensate for oil leakage and offer the possibility ofvisual inspection of the oil level.

How it worksThe SKF Oil Leveller consists of two communicating oil reservoirs. The lower reservoir isin direct contact with the application and hence its oil level is the same as the oil levelinside the application. Through a ventilation tube, the lower reservoir is also in directcontact with the ambient air.

The upper reservoir is an airtight container storing replacement oil. Through its extendedneck, which dips into the oil of the lower reservoir, the two reservoirs are in directcontact with each other. However, oil can only flow from the upper to the lower reservoironce the oil level in the lower reservoir goes below the pre-set level, allowing air to flowthrough the extended neck to the upper reservoir.

Guaranteed oil level ensures adequate lubrication

Easy visual inspection Extended relubrication intervals.

LAHD 1000 compensates forevaporation losses of up to 1 liter of lubricating oil!

Automatic adjustment for optimal oil lubrication level109

109

The grease packer LAGP 400 is a low pressure alternative for emptying SKF grease cartridges. It provides an easy and clean alternative to manualgrease packing of open bearings.

Designation

LAGP 400 Grease packer

Ordering details

68



One hand operated grease gun LAGH 400 Easy grease filling with one hand

Suitable for grease filling by filler pumps/grease pumps and also suitable for grease cartridges. Ergonomicdesign, flexible hose and possibility to mount the hose in both vertical and horizontal position ensure ease-of-use.

Easy-to-use: only one hand is needed to operate the gun

Refillable: grease filling nippleand de-airing valve allow filling up by filler or grease pump

Heavy duty: operating pressure up to 30 MPa

0,8 cm3 (0.05 in3) volume/stroke Flexible hydraulic type hose:

can be bent, can be mounted bothhorizontally and vertically on the gun

For use with cartridges and loose grease

Rigid hinging system offers long-lasting use

Knurled body for firm and safe grip High quality steel is dent-resistant for

easy cartridge loading

Special piston design for smoothemptying of cartridges

40 MPa (5,800 psi) maximum pressure 1,5 cm3 (0.092 in3 ) volume/stroke Also available as a complete set

The SKF grease gun is delivered with a 175 mm (6.9 in) long extension pipe withhydraulic gripping nozzle. A flexible 500 mm (19.7 in) long pressure hose with hydraulicgripping nozzle is available as an accessory.

Grease gun 1077600

Easy grease fillingThe SKF grease gun is ideal for the agricultural, industrial and constructionindustries and for private use.

109

109

Designation

1077600 Grease gun1077601 Flexible hose1077600/SET Grease gun set

Ordering details

Designation

LAGH 400 Grease gun

Ordering details

69

Grease filler pumps LAGF seriesHigh quantity grease packer

SKF filler pumps are suitable for filling grease guns. Especially designed for use on grease gun 1077600 and LAGH 400. Tested and approved for SKF greases. Easy to install and ready for use. Available for standard SKF 18 and 50 kg (39 and 110 lb) drums.

Quick filling: low pressure allows higher stroke volume

Easy to install: all necessary items are included

Reliable: tested and approved for all SKF greases

Grease pumps LAGG series

Meeting all your grease lubricator needsFull range of manual and air-operated grease pumps are designed to empty standard 18, 50 or 180 kg (39, 110 or 400 lb) grease drums. Can be connected directly on the greasing points, also suitable for centralisedlubricating grease systems. SKF grease pumps have a maximum pressure of 50 and 42 MPa (7,250 and 6,090 psi)respectively. Tested and approved for SKF greases. Easy to install and ready for use since pumps are supplied withall necessary items including 3 500 mm (137.8 in) of tubing.

Full range; pumps available for 18, 50 or 180 kg (39, 110 or 400 lb) drums

High pressure; maximum of 50 MPa (7,250 psi)

Easy to install; all necessary items as well as 3.500 mm (137.8 in) of tubing are included

Reliable; tested and approved for SKF greases

LAGG 18M LAGG 18A LAGG 50A LAGG 180A LAGT 180

109

109

Designation

LAGG 18M Grease pump for 18 kg drumsLAGG 18A Mobile grease pump for 18 kg drumsLAGG 50A Grease pump for 50 kg drumsLAGG 180A Grease pump for 180 kg drumsLAGT 180 Trolley for drums up to 200 kg

Ordering details

Designation

LAGF 18 Grease filler pump for 18 kg drumsLAGF 50 Grease filler pump for 50 kg drums

Ordering details

70



The SKF LAGS 8 Grease nozzle kit provides the user with practicalaccessories for daily lubrication such as connectors, couplings and nozzlesmost widely used in the industry. To meet all of your needs for greaselubrication points, SKF has developed a grease fitting kit, LAGN 120, whichcontains a full range of 120 standardised conical grease fittings made ofprecision steel, zinc plated, hardened and blue chromated.

Lubrication accessory sets Grease nozzles LAGS 8 Grease nipples LAGN 120

The right tools for adequate (re)lubrication

Reliable grease quantity measurement for accurate lubrication

Designation: LAGN 120

Grease Quantitynipple

M6x1 straight 30x M8x1 straight 20xM10x1 straight 10xG 1/8 straight 10xM6x1 45˚ 5xM8x1 45˚ 10xM10x1 45˚ 5xG1/8 45˚ 5xM6x1 90˚ 5xM8x1 90˚ 10xM10x1 90˚ 5xG1/8 90˚ 5x

Contents

Designation: LAGS 8

Straight pipe 180 mm and nozzle / Hose / Tube / Tube with nose piece and plastic transparent cover / Nipple M10x1-G1/8 / Nipple M10x1-1/8-27NPS / Nozzle (2x)

Contents

Includes the most widely usedaccessories in the industry

Upgrade the 1077600 grease gun withthe LAGS 8 Grease nozzle kit

Replace damaged grease fittings

Grease meter LAGM 1000

For adequate and accurate (re-)lubrication the use of a grease meter is required. The SKF grease meterenables you to determine the exact amount of grease supplied to the application. The amount is measured in cm3

(which can be easily converted to grams by the use of grease density).

Accurate lubrication: measures the exact amount of grease applied to the application (in cm3)

Easy to install: can be mounted on any grease lubrication equipment (e.g. grease guns, pumps)

Reliable: tested and approved for all SKF greases

110

110

71

Oil Power - the SKF oil injection method 72

Hydraulic nuts HMV E series 73

SKF Oil Injection CD-ROM 74

Adapter and withdrawal sleeves for Oil Injection 75

The SKF Drive-up Method 75

Drive-up Method CD-ROM 76

Hydraulic pumps and oil injectors selection guide 77

Air-driven hydraulic pumps, THAP series 77

Air-driven foot-operated

Hydraulic pump TMJA 70E 78

Hydraulic pump TMJL 50 78


Hydraulic pump 729124 79


Screw injectors 226270 and 226271 80

Oil injector 226400 series 81

Oil injection sets TMJE 300 and 400 series 81

Oil injection kits 729101 series 82

Adapter block 226402 82

High pressure pipes 82

Pressure gauges 83

Plugs for oil ducts and vent holes 83

Flexible high pressure hoses 83

Quick connecting coupling and nipples 83

Connection pipes with metric and G pipe threads 83

Connection nipples with NPT tapered threads 84

Extension pipes with connecting nipples 84

Mounting and dismounting fluid

LHMF 300 and LHDF 900 84

OK coupling mounting and dismounting kits 85

O I L P O W E R

72

O I L P O W E R

O I L P O W E R

Oil Power - the SKF oil injection method

Makes bearing mounting and dismounting an easy task

The concept

A By injecting oil of a certainviscosity between two shrink fittedsurfaces, the mating surfaces willbe separated by a thin oil film. If the surfaces are cylindrical, the fitted components can easily be removed.

The preparation

B During manufacture the shaftsare prepared with oil ducts andgrooves. For technical informationon how to prepare the shafts,consult an SKF application engineer.

The action

C Bearings are mounted byheating them with an SKF inductionheater.

D Dismounting the bearing is madeeasy by pumping oil under pressurebetween the mating surfaces. Once the oil pressure has built up,the component can be removedfrom the shaft with a minimum of effort.

The concept

A Injecting the oil between twotapered surfaces will create areaction force which could be quitesubstantial as the oil will also act asa “hydraulic cylinder” which canpush the outer component off.

The preparation

B During manufacture the shaftsare prepared with oil ducts andgrooves. For technical informationon how to prepare the shafts,consult an SKF application engineer.

The action

C Bearings are mounted bypushing them up the shaft with theaid of an SKF HMV nut.

D Bearings are dismounted byinjecting oil between the matingsurfaces and when sufficientpressure is reached, the bearing will be pushed off. A nut is required to keep the bearing from sliding off the shaft.

Developed by SKF in the 1940s, the Oil Injection Method allows bearings and other components with an inter-ference fit to be fitted and removed in a safe, controllable and rapid manner. The method does not require keywaysto be machined on the shaft, saving valuable time and money in materials and production. Interference fits (alsoknown as shrink fits) have long been recognised for their reliability in transmitting large torsional loads. Very ofteninterference fits offer the only solution when connecting hubs to shafts with intermittent or fluctuating loads.

When using the SKF Oil Injection Method the mating surfaces are separated by a thin film of oil injected under highpressure, thereby virtually eliminating the friction between them. This enables interference fits on cylindrical shaftsto be overcome and the fitted component removed quickly and effortlessly. The method is even more versatile whenused on tapered shafts, as it can be used for both mounting and dismounting the fitted components. The method,which is used for many bearing applications, can also be found in other applications, such as:

Cylindrical shafts

Tapered shafts

Couplings Gear wheels Railway wheels Propellers Built-up crankshafts

A B C D

A B C D

73

Hydraulic nuts HMV E seriesAccommodates high drive-up forces with ease

Mounting and dismounting bearings on tapered shafts orsleeves is often a difficult and time consuming job. Theseproblems are reduced with the use of an SKF hydraulicnut. Oil is pumped into the nut and the piston is pushedout with a force which is sufficient for mounting anddismounting bearings - effortlessly, accurately andsafely. All HMV E nuts are supplied with a quickconnection coupling to fit the SKF hydraulic pumps.

Covers shaft diameters from 50 mm to 1 000 mm

Full range of inch threads available HMVC E series - 1.967 in to 37.410 in

Special threads available on request Reduced time to mount bearings Accurate safe bearing adjustment

Mounting

A HMV E nut for driving the bearing onto a tapered seating.B HMV E nut screwed onto the shaft for driving in a withdrawal sleeve.C HMV E nut for driving the bearing onto an adapter sleeve.D HMV E nut and special stop nut for driving in a withdrawal sleeve.

Dismounting

A HMV E nut and stop ring in position to press an adapter sleeve free.B HMV E nut used to free a withdrawal sleeve.

Mounting

Dismounting

Variations of use

A B C D

A B

110-113

74

O I L P O W E R

O I L P O W E R

SKF Oil Injection CD-ROM

The SKF oil injection calculations made easyThis new CD-ROM calculation program computes easily the laborious manual calculations often necessary for the SKF Oil Injection Method. Additionally, the CD-ROM provides theoretical details behind the method plusinformation on designing components, practical experiences, application examples and more. The CD-ROMprovides you with detailed instructions and practical information on how to use the SKF Oil Injection Method formounting and dismounting bearings, as well as using the method in design, calculation and application of shrinkfitted components.

The CD-ROM is a powerful tool which includes the following features:

User-friendly calculation program to determine pressures,stresses and interference levels

Explanations of the theoretical background Information on designing components Information on SKF products which enable the Oil Injection

Method to be used Practical experiences and application examples Complete SKF Drive-up Method program for fitting SRB,

CARBTM and Explorer bearings in a safe, rapid and controlled manner

Information on related SKF products such as gauges,heaters and pullers

In addition the program includes animations, photographs, detailed product information and instructions-for-use, as well as video clips showing various methods and techniques. The benefits of using the SKF Oil Injection CD-ROM include:

Substantial time and cost-savings Elimination of arithmetic errors Ability to see the effects of design changes in seconds All information on Oil Injection gathered on one CD-ROM Quick and easy access to all the advantages of the

Oil Injection Method

The advantages of the SKF Oil Injection Method include:

Saving time and money in materials, production and maintenance operations

Fitting and removing shrink fitted components in a safe, controllable and rapid manner

NEW

75

Adapter and withdrawal sleeves for Oil InjectionMounting and dismounting of bearings made easyThese SKF sleeves facilitate the use of the SKF Oil Injection Method. The larger sleeves have oil supply ducts and distribution grooves, enablingthe user to inject oil between the sleeve and bearing bore and between thesleeve and the shaft. This oil reduces friction and force necessary formounting and dismounting, particularly when mounting in a dry state.

Reduces the risk of damage to shaft and sleeve

Reduces time to mount and dismount bearings

A full range of pumps, nipples andpipes are available

The SKF Drive-up Method

Accurate axial drive-up of spherical roller bearingsA new method of accurately achieving the adjustment of spherical roller bearings, mounted on tapered seatings, isnow available from SKF. The correct fit is achieved by controlling the axial drive-up of the bearing from apredetermined position. The method incorporates the use of an SKF HMV E hydraulic nut fitted with a dial indicator,and a specially calibrated pressure gauge, mounted on the selected pump. Special hydraulic pressure tables havebeen developed, providing the required MPa pressures, for each bearing type. This enables accurate positioning ofthe bearing at the starting point from where the axial drive-up is measured.

Reduces the use of feeler gauges Greatly reduces the time to mount

spherical roller bearings and CARBTM

A reliable and accurate method of adjustment Ideal for use on sealed spherical roller bearings

Designation Description Designation Description

For imperial versions of pumps, gauges and dial indicators, please see page 113-115

HMV ..E (i.e. HMV 54E) Metric thread hydraulic nutHMVC ..E (i.e. HMVC 54E) Inch thread hydraulic nutHMV ..E/A101 (i.e. HMV 54E/A101) Unthreaded hydraulic nut729124 SRB (for nuts ≤ HMV 54E) Pump with digital gauge (MPa)TMJL 100SRB (for nuts ≤ HMV 92E) Pump with digital gauge (MPa)TMJL 50SRB (for nuts ≤ HMV 200E) Pump with digital gauge (MPa)

TMJG 100 D Gauge only (MPa)TMCD 10R Horizontal dial indicator (0-10 mm)TMCD 5P Vertical dial indicator (0-5 mm)TMCD 1/2R Horizontal dial indicator (0-0.5 in)

Ordering details

For more information, please refer to the SKF General Catalogue, the SKF Maintenance Handbook or consult an SKF application engineer.

113-115

76

O I L P O W E R

O I L P O W E R

1 Ensure that the bearing size is equal to the HMV E-nut. (Otherwise the pressure in the table must be adjusted.)

2 Determine whether one or two surfaces slide during mounting; see figures A-D.

3 Lightly oil all mating surfaces with a thin oil, e.g. SKF LHMF 300, and carefully place the bearing on the shaft.

4 Drive the bearing up to the starting position by applying the HMV E-nutpressure found in the table. Monitor the pressure by the gauge on theselected pump. SKF hydraulic pump 729124 SRB is suitable forhydraulic nuts ≤ HMV 54E. SKF TMJL 100SRB is suitable for hydraulicnuts ≤ HMV 92E while TMJL 50SRB is suitable for nuts ≤ HMV 200E. As an alternative the SKF mounting gauge TMJG 100D can be screweddirectly into the hydraulic nut.

5 Drive the bearing up the taper by the required distance Ss.The axialdrive-up is best monitored by a dial indicator. The SKF hydraulic nutHMV E is prepared for dial indicators. Normally, the bearing is nowmounted with a suitable interference on the shaft and a suitable residual clearance.

For abnormal operating conditions, hollow shafts, very accuraterequirements on residual clearance etc., the drive-up must be adjusted. In such cases please contact SKF or refer to the SKF Drive-up Method CD-ROM.

Drive-up Method CD-ROM

The SKF Drive-up Method is used for mounting bearings with a tapered bore. This CD-ROM gives a description of the method with the aid of pictures,animations and tables. Additionally, the program contains an extensivecalculation module.

The SKF Drive-up Method

A1 Zero positionA2 Starting positionA3 Final position

One sliding surface One sliding surface

Two sliding surfaces Two sliding surfaces

Step by step procedure

A computerised handbook on mounting bearings with a tapered bore

A B

C D

Patent pending

77

Air-driven hydraulic pumps,THAP series

30, 150 and 300 MPa - (4,350, 21,750 and 43,500 psi)The THAP air-driven pumps are available in three different pressure versions. They are used for mounting anddismounting OK couplings, for dismounting large pressure joints such as bearings, flywheels, couplings, railwaywheels and in many similar applications. The pumps consist of a high pressure hydraulic pump, driven by an airpiston. The units are supplied in a metal case including oil suction and return hoses with quick connect couplings. The pumps can also be supplied in complete sets which consists of pump, pressure gauge, adapter block, high pressure pipe and connection nipples. A cabinet version with built-in oil supply is also available.

Time savings compared to hand operated pumps

Continuous supply of oil Strong metal storage boxes Low, medium and high pressure units

Applications SKF OK-Couplings Mounting and dismounting bearings Dismounting large pressure joints like

railway wheels, couplings, flywheelsand gear wheels and so on

Mounting and dismounting shippropellers, rudder pintles and so on

Max. working pressure Pump Type Oil container capacity Connection nipple

30 MPa 4,350 psi THAP 030 Air-driven pump separate container oil G 3/4THAP 030 K Air-driven pump 10 litres 2.6 US gal. G 1/4

50 MPa 7,250 psi TMJL 50 Hand operated pump 2.700 cm3 165 in3 G 1/4

70 MPa 10,000 psi TMJA 70E Air-driven pump 1.000 cm3 61 in3 G 1/4

100 MPa 14,500 psi 729124 Hand operated pump 250 cm3 15 in3 G 1/4TMJL 100 Hand operated pump 800 cm3 48 in3 G 1/4

150 MPa 21,750 psi THAP 150 Air-driven pump separate container G 3/4THAP 150K Air-driven pump 10 litres 2.6 US gal. G 1/4728619 Hand operated pump 2.300 cm3 140 in3 G 1/4

300 MPa 43,500 psi THAP 300 Air-driven pump separate container G 3/4THAP 300K Air-driven pump 10 litres 2.6 US gal. G 3/4226400 Hand operated oil injector 200 cm3 12.2 in3 G 3/4729101 B Oil injection kit 200 cm3 12.2 in3 severalTMJE 300 Oil injection set 200 cm3 12.2 in3 several226270 Screw injector 5,5 cm3 0.33 in3 G 3/8226271 Screw injector 25 cm3 1.5 in3 G 3/4

400 MPa 58,000 psi 226400/400MPa Hand operated oil injector 200 cm3 12.2 in3 G 3/4729101 E Oil injection kit 200 cm3 12.2 in3 G 1/4TMJE 400 Oil injection set 200 cm3 12.2 in3 G 1/4

Hydraulic pumps and oil injectors selection guide

Ordering details and dimensions

THAP

THAP K THAP SET

115

78

O I L P O W E R

O I L P O W E R

Air-driven foot-operated hydraulic pump TMJA 70E

70 MPa - (10,000 psi)The TMJA 70E is an air-driven, foot operated pump particularly suitable for maintenance work where bothhands must be free from the task of pumping the oil. For example, the user is able to use both hands foroperating a hydraulic puller, a hydraulic ram or hydraulic nuts (HMV E). The pump is supplied with a 3 000mm (118 inch) long high pressure hose including quick connect couplings and is filled with hydraulic fluid.

Hydraulic pump TMJL 50

50 MPa - (7,250 psi)The TMJL 50 pump is mainly intended for use on the low pressure side of SKF OK couplings, but is alsosuitable for applications where a maximum pressure of 50 MPa (7,250 psi) is required. The pump is suppliedwith a 3 000 mm (118 in) long high pressure hose with quick connect coupling and mating nipple. It is filledwith SKF mounting fluid LHMF 300 and is supplied with an extra litre of fluid. The pump is fitted with an over-pressure valve and has a connection port for a pressure gauge.

Large oil container (cap. 2 700 cm3, 165 in3) Over pressure valve Extra litre of mounting fluid Packed in a sturdy protective case

Applications Low pressure side of SKF OK couplings Larger size hydraulic nuts (≥ HMV 94E) All other oil injection applications where the maximum

pressure is 50 MPa (7,250 psi)

Hands-free operation Lightweight for easy handling (5,9 kg /11 lbs) Suitable for hydraulic nuts Suitable with SKF hydraulic pullers (TMHP 8,

TMBS 100 and TMBS 150) and hydraulic ram (TMHR 8)

ApplicationsOil power applications where the maximum pressure is 70 MPa (10,000 psi).

116

116

79

Hydraulic pump TMJL 100

Large oil container 100 MPa - (14,500 psi)The TMJL 100 pump is suitable for use with hydraulic nuts (≤ HMV 92E) and for mounting and dismountingbearings or components where a maximum pressure of 100 MPa (14,500 psi) is required. The pump issupplied with 3 000 mm (118 in) pressure hose, quick connect coupling and mating nipple, and pressuregauge. The pump is filled with SKF mounting fluid LHMF 300 and is supplied with an extra litre of fluid and has agreatly increased oil container capacity over the 729124 (800 cm3 - 48 in3).

Suitable for hydraulic nuts ≤ HMV 92E Suitable with SKF hydraulic assisted pullers TMHP series Extra litre of mounting fluid Packed in a sturdy protective case

Applications SKF hydraulic nuts ≤ HMV 92E All other oil injection applications where the maximum

pressure is 100 MPa (14,500 psi) SKF hydraulic assisted pullers TMHP series

Hydraulic pump 729124

100 MPa - (14,500 psi)The 729124 pump is suitable for use with hydraulic nuts (≤ HMV 54E) and for mounting and dismountingbearings or components where a maximum pressure of 100 MPa (14,500 psi) is required. The pump issupplied with 1 500 mm (59 in) pressure hose, quick connect coupling and mating nipple and pressuregauge. The pump is filled with SKF mounting fluid LHMF 300 and is supplied with an extra litre of fluid. For applications where space does not permit the use of a quick connect coupling and nipple, such as AOH sleeves,a special pump design is available (729124 A).

Suitable for hydraulic nuts ≤ HMV 54E Extra litre of mounting fluid Special pump configurations available Packed in a sturdy protective case

Applications SKF hydraulic nuts ≤ HMV 54E All other oil injection applications where the maximum


116

116

80

O I L P O W E R

O I L P O W E R

Hydraulic pump 728619

150 MPa - (21,750 psi)The 728619 is a two stage pump suitable for use with SKF Supergrip bolts and for the mounting anddismounting of bearings or components where a maximum pressure of 150 MPa (21,750 psi) is required. The pump is supplied with a 3 000 mm (118 in) pressure hose, quick connect coupling and mating nipple andpressure gauge. The pump is filled with SKF mounting fluid LHMF 300, is supplied with an extra litre and is protectedin a sturdy metal case.

Two stage pressure pumping Extra litre of mounting fluid Packed in a sturdy protective metal case

Applications SKF Supergrip bolts All other oil injection applications where the maximum


Screw injectors 226270 and 226271

300 MPa - (43,500 psi)The 226270 and 226271 screw injectors are mainly used within the machine tool industry for mounting anddismounting bearings and components using the SKF oil injection method. Valve nipples 226272 and226273 can be used to retain the oil pressure while the injector is refilled.

226270 is suitable for components with a shaft diameter up to 100 mm (4 in)

226271 is suitable for components with a shaft diameter not exceeding 200 mm (8 in)

116

116

81

Oil injector 226400 series

300 MPa - (43,500 psi) and 400 MPa - (58,000 psi)The 226400 series oil injectors have a varied usage when applyingthe SKF oil injection method. For mounting and dismounting bearings,couplings, railway wheels, gear wheels, fly wheels, ship propellers and so on. The injector is supplied with an oil reservoir in a compact carrying case. For applications where 400 MPa (58.000 psi) is required a special model isavailable: 226400/400 MPa. The injector can be mounted directly onto theworkpiece or connected to an adapter block to make it a floor standing modelmaking it easy to connect pressure gauges and high pressure pipes.

Easy to operate Compact carrying case Large range of accessories available,

including: Adapter block Pressure gauges High pressure pipes Connecting nipples

Applications For mounting and dismounting of:

Bearings Couplings Railway wheels Gear wheels Flywheels Ship propellers and so on For any oil injection application

where maximum pressure of up to400 MPa (58,000 psi) is required

Oil Injection sets TMJE 300 and 400 series

300 MPa - (43,500 psi) and 400 MPa - (58,000 psi)

The SKF TMJE 300 and 400 are used for the mounting and dismounting of pressure joints of all sizes and applications such as propellers, rolling bearings, couplings, gears, pulleys, flywheels and SKF OK-couplings.

Designations TMJE 300 TMJE 400

Oil injector TMJE 300-1 TMJE 400-1Pressure gauge 1077589 1077589/2High pressure pipe (G 3/4 - 1/4) 227957 A 227957 A/400MPaConnection nipple (G 1/4 - 1/8) 1014357 A -Connection nipple (G 1/4 - 1/2) 1016402 -Connection nipple (G 1/4 - 3/4) 228027 -Carrying case 728245/3 A 728245/3 APlug 729944 -Mounting fluid LHMF 300/1 LHMF 300/1

Complete high-pressure set withintegral pressure gauge, oil reservoirand 2.0 m high-pressure pipe

Can be dismounted and used directly on the application

Provided with range of connection nipples

117

117

Contents list

82

O I L P O W E R

O I L P O W E R

Oil injection kit (300 MPa/43,500 psi) 729101 B

Oil injection kit (400 MPa/58,000 psi) 729101 E

Oil injection kits 729101 series

300 MPa - (43,500 psi) and 400 MPa - (58,000 psi)The oil injection kits contain the oil injector 226400 complete withhigh pressure pipe, pressure gauge, adapter block and a range of connection nipples all packed together in a sturdy plasticcarrying case.

High pressure pipes Maximum working pressure 300 MPa (43,500 psi)

The range of SKF high pressure pipes cover most applications where there is a requirement to transfer oil at high pressure. They consist of a steel pipe with a steel ball fitted to both ends. Two swivelling connectionnipples press these balls against the seating of the connecting hole and thus sealing against oil leakage.

Wide range of pipes All pipes are pressure tested to

100 MPa (14,500 psi) over recommended working pressure

Special lengths (up to 4 m / 157 in)made on request

400 MPa versions available

729101 B Oil injection kit (300 MPa / 43,500 psi)

729101 E Oil injection kit (400 MPa / 58,000 psi)

Ordering details

Designation 729101 B 729101 E

Oil injector 226400 226400/400 MPaAdapter block 226402 226402High pressure pipe (G 3/4 - 1/4) 227957 A 227957 A/400 MPaConnection nipple (G 1/4 - 1/8) 1014357 A -Connection nipple (G 1/4 - 1/2) 1016402 -Connection nipple (G 1/4 - 3/4) 228027 -Pressure gauge (0 - 300 MPa) 1077589 1077589/2 (0-400 MPa)Carrying case 729111 B 729111 B

Contents list

Hydraulic accessoriesAdapter block 226402

The adapter block 226402 consists of a cast steel block to which a pressuregauge and high pressure pipe can be connected. It comes with a floor support and a90 degree connection nipple for the oil reservoir.

117

117

Note: For safety reasons these high pressure pipes have a maximum recommended life of 5 years.

83

Pressures gauges100 MPa - (14,500 psi) to 400 MPa - (58,000 psi)

SKF pressure gauges are designed to fit SKF hydraulic pumps and oilinjectors. The gauges are all liquid filled and/or equipped with a restrictionscrew in order to absorb any sudden pressure drop and prevent damage. Safety glass and blowout discs are standard for all 100 mm (3.9 in) diametergauges and all have dual scales (MPa/psi).

Covers pressures of 100 to 400 MPa (14,500 to 58,000 psi)

Protection against sudden pressure drops

Safety glass and blow out discs on all 100 mm (3.9 in) diameter gauges

Dual scales MPa/psi (except digital gauges)

Plugs for oil ducts and vent holesUp to 300 MPa (43,500 psi)

SKF plugs have been designed to seal off oil connections at a maximum pressure of 300 MPa (43,500 psi).

Flexible high pressure hoses Maximum working pressure 150 MPa (21,750 psi)

The SKF flexible pressure hoses are designed to be used together with the quickconnect coupling 729831 A and nipple 729832 A on the range of SKF hydraulic pumps.

Quick connecting coupling and nipples For easy pressure hose connection

One coupling and two different nipples are available to connect SKF hydraulic pumps to the workpiece. When nipples with other thread types are required, select an additional SKFnipple from the range to make the connection. Nipple 729832 A is supplied standard with all SKFHMV hydraulic nuts.

Connection nipples with metric and G pipe threads External to internal metric and G pipe threads

SKF provides a wide range of connecting nipples covering manydifferent thread combinations and sizes. All nipples have a maximumworking pressure of 300 MPa (43,500 psi). Nipples having a maximumworking pressure of 400 MPa (58,000 psi) are available on request.

118

118

118

118

119

84

O I L P O W E R

O I L P O W E R

Connection nipples with NPT tapered threadsConnection nipples with tapered threads (NPT) and pipe threads (G)

SKF can also supply a range of adapters for connecting NPT threads to G threads. All nipples have amaximum working pressure of 300 MPa (43,500psi). Nipples having a maximum working pressure of 400 MPa(58,000 psi) are available on request.

Extension pipes with connecting nipples Catering for difficult connection applications

M4 extension pipe with connection nippleUsed to extend a high pressure pipe with a G 1/4 nipple (e.g. 227957 A) when the connection hole has a M4 thread. The extension pipe and connection nipple should be ordered as separate items.

M6 extension pipe with connection nippleUsed to extend a high pressure pipe with a G 1/4 nipple (e.g. 227957 A) when the connection hole has a M6 thread. The extension pipe and connection nipple should be ordered as separate items.

Valve nipple with extension pipeThis combination is intended to be used between an oil pressure joint and an oil injector (226271) when a thin wall thickness of the pressure joint prevents the connection of the injector directly to the joint. The valve nipple is used to retain the pressured oil while the injector is refilled. The extension pipe andconnection nipple should be ordered as separate items.

Extention pipeThis unit is used for connection to components with a thin wall thickness, such as sleeves with oil injectionpreparations. It is normally used in combination with high pressure pipes such as 227957 A.

Mounting and dismounting fluid LHMF 300 and LHDF 900

The SKF mounting (LHMF) and dismounting (LHDF) fluid is suitable for use with SKF hydraulic equipment, including hydraulic pumps, HMV nuts and oil injection tools. Both products contain anti corrosives which are nonaggressive to seal materials such as nitrile rubber, perbunan, leather and chrome leather, PTFE, and so on.

Designation LHMF 300/pack size LHDF 900/pack size

Specific gravity 0,882 0,889Flash point 200 °C (390 °F) 215 °C (420 °F) Pour point -30 °C (-22 °F) -25 °C (-13 °F) Viscosity at 20 °C (68 °F) 300 cSt 900 cSt Viscosity at 40 °C (299 °F) 116 cSt 300 cSt Viscosity at 100 °C (212 °F) 17,5 cSt 37 cSt Viscosity index 160 160Available packsize 1, 5, 205 litre 5, 205 litre

Ordering details and technical data

For easy and quick bearing mounting and dismounting

118

119

85

OK Coupling mounting and dismounting kits

Specially prepared kits are made to simplify the process of mounting and dismounting SKF OK couplings.

Coupling size Designation Contents Weight Application

OKC 25- OKC 90 TMHK 35 1 x TMJE 300-1 Oil injector set 13,8 kg 1 x 729944 Plug (30.4 lb)1 x 227958 A Pressure pipe (for OKC 80 and 90)1 x 729123 A/2000 Pressure pipe (for OKC 25-75)Tools and storage case

OKC 100-OKC 170 TMHK 36 1 x 226400 Injector with spares 19 kgOKCS 178 -OKCS 360 1 x TMJL 50 Hydraulic pump (41.8 lb)

Tools and storage case

OKC 180-OKC 250 TMHK 37 2 x 226400 Injector with spares 28,1 kgOKF 100-OKF 300 1 x 226402 * Adapter block (61.8 lb)* = for use with 1 x 227958 A * High pressure pipeOKF couplings 1 x TMJL 50 Hydraulic pump

Tools and storage case

OKC 180-OKC 490 TMHK 38 1 x THAP 030/SET Air-driven pump set 32,1 kgOKF 300-OKF 700 1 x 729147 A Return hose (70.6 lb)Shipboard or 2 x 226400 Injector with sparesinfrequent use

OKC 180-OKC 490 TMHK 38S 1 x THAP 030/SET Air-driven pump set 76,2 kgOKF 300-OKF 700 1 x 729147 A Return hose (167.6 lb)Shipyard or frequent use 1 x THAP 300 Air-driven pump

1 x 226400 Injector with spares

OKC 500 - OKC 600 TMHK 39 1 x THAP 030/SET Air-driven pump set 35,1 kgShipboard or 1 x 729147 A Return hose (77.2 lb)infrequent use 3 x 226400 Injector with spares

OKC 500 and larger TMHK 40 1 x THAP 030/SET Air-driven pump set 78,2 kgShipboard or 1 x THAP 300 Air-driven pump (172.0 lb)infrequent use 1 x 729147 A Return hose

2 x 226400 Injector with spares

OKC 500 and larger TMHK 41 1 x THAP 030/SET Air-driven pump set 126,7 kgShipyard or frequent use 3 x THAP 300 Air-driven pump (278.7 lb)

1 x 729147 A Return hose

Ordering details and selection chart

OKC OKF

OKC OKF

OKC OKF

86

S U P P O R T

SKF internet siteSKF Maintenance Products has launched an internet site with its maintenance catalogue online, offering a complete listing of products and technical specifications, http://www.mapro.skf.com.For information on the SKF Group, history, products, divisions and services worldwide visit the Group site online,http://www.skf.com.

SKF SupportReduced machinery downtime through effective bearing maintenance

Product quality is just one of the factors that determine bearing service life. Operating environment, proper installationand maintenance are also critical to bearing performance; factors that enter the picture after the bearing has beendelivered to our customers. At SKF we have put together the industry’s most comprehensive program for maximisingbearing service life and to help our customers reduce costly machine stoppages due to bearing failures.

For more information on the services described below, please contact your nearest SKF supplier.

SKF Drive-up MethodThe SKF Drive-up Method CD-ROM program is a computerized handbook on how to use the Drive-up Method for mountingbearings with a tapered bore. The program describes the method with the aid of pictures, animations, videos, and calculation tables that can easily be printed. The program is available in English, German, Swedish, French, Italian and Spanish. Reference no. MP282

SKF Oil Injection MethodThe SKF Oil Injection Method allows bearings and other components with an interference fit to be fitted and removed in a safe, controllable and rapid manner. The CD-ROM revolutionizes the method by fully automating the technique, making the detailed calculations easy and simple to compute. The CD-ROM provides detailed instructions and practical informationon how to use the method for mounting and dismounting bearings, as well as using the method in design, calculation andapplication of shrink fitted components. Reference no. MP293E

SKF Demonstration TrucksSKF offers demonstrations and training with mobile demonstration vehicles which tour throughout Europe and

North America. The training program is tailored to the customers needs and may consist of a short theoreticalexplanation of the latest maintenance methods and concepts, followed by a detailed hands-on demonstration with qualified SKF personnel. For more information about these vehicles, please contact your local distributor or SKF office to schedule an appointment.

SKF DialSet Re-lubrication Calculation ProgramThe SKF DialSet Re-lubrication Calculation program enables accurate calculation of re-lubrication intervals for lubricating bearings. The computerized program determines the right time setting and dispense rates for SYSTEM 24 andSYSTEM MultiPoint. It also recommends when to use SYSTEM 24 LAGD 125 or LAGD 60. The program is available ondiskette and is translated into English, French, German, Swedish, Spanish and Italian languages. Reference no. MP337

87

S U P P O R T

SKF Industrial Service Centre (ISC)

GeneralIn order to provide its customers with a professional and speedyservice, SKF has dedicated the SKF Industrial Service Centre(ISC) in Steyr, Austria to handle repairs of all SKF products. SKFISC provides repair and calibration services for the entire productrange of SKF Maintenance Products as well as a rental service oflarge equipment. By providing professional repair service, SKFMaintenance Products offers its customers excellent qualityproducts combined with high quality and quick repair services.

Repair ServicesSKF ISC offers a professional and fast repair service for allproducts supplied by SKF Maintenance Products, such aswarranty repairs, normal repairs and quality complaints.Additionally, SKF ISC has built a database containing all repairscarried out. This database forms a valuable source of informationas it provides SKF Maintenance Products with feedback from itscustomers. With this feedback in mind, SKF MaintenanceProducts strives to improve its existing product range anddevelop new products and maintenance solutions.

Calibration ServicesSKF ISC also provides calibration services of all instruments andmeasuring equipment supplied by SKF Maintenance Products,such as digital thermometers, temperature probes, opticaltachometers and shaft and belt alignment tools. The facilities ofSKF ISC include an advanced and well-equipped calibrationlaboratory with state of the art reference instruments.Additionally, all calibration certificates provided by SKF ISC arefully traceable to national standards.

Rental ServicesFor customers who require occasional use of large equipment,such as the SKF TIH 240 induction heater, SKF ISC offers variousproducts of SKF Maintenance Products for rent. SKF ISC alsooffers other induction heaters, such as the TIH 120 and TIH 60,and hydraulic equipment, such as hydraulic pumps and HMVhydraulic nuts for rent.

For more information on SKF ISC and its services please contactyour nearest SKF dealer. In Germany or Austria, please contactSKF ISC directly at:

Professional service for professional products

SKF Österreich AGSKF Industrial Service CentreSeitenstettner Str. 15A-4400 Steyr, Austria

Phone: +43-(0)7252-797 733Fax: +43-(0)7252-797 732E-Mail: [email protected]

TrainingSKF offers training courses on all facets ofbearing maintenance. By prior arrangementtraining courses can be organised at ourcustomers’ own premises or at one of our well-equipped SKF Maintenance Support Centres.

Technical literatureSKF technical literature is a must in everymaintenance workshop. The SKF GeneralCatalogue and the unique SKF BearingMaintenance Handbook provide the answers to all mounting and dismounting questions.

Audio visualSKF provides a range of videos to supporttraining courses on different facets of bearingand seal performance. The “Get Smart Too”video is a commercial video showing the do’sand don’t’s of good bearing maintenance.

Field serviceFor difficult mounting and dismounting jobs,SKF service engineers are available to assist in the work.

88

T E C H N I C A L D A T A

Desig- Dimensions Weight Suitable for adapter Suitablenation sleeves of series for nuts

H 2, of seriesH 3, H 23, H 30, KM, N, AN

d f L H 31, H 32 H 39 KMF, KMTKMK

mm in mm in mm in kg lb size size size

HN 1 22 0.9 2 0.08 100 3.9 0,06 0.1 01 - 1HN 2 25 1.0 2,5 0.10 100 3.9 0,06 0.1 02 - 2HN 3 28 1.1 2,5 0.10 100 3.9 0,06 0.1 03 - 3HN 4 32 1.3 2,5 0.10 120 4.7 0,05 0.1 04 - 4HN 5 38 1.5 3 0.12 150 5.9 0,09 0.2 05 - 5HN 6 45 1.8 3,5 0.14 180 7.1 0,16 0.4 06 - 6HN 7 52 2.0 3,5 0.14 180 7.1 0,16 0.4 07 - 7HN 8 58 2.3 4 0.16 210 8.3 0,28 0.6 08 - 8HN 9 65 2.6 4 0.16 210 8.3 0,27 0.6 09 - 9HN 10 70 2.8 4 0.16 210 8.3 0,26 0.6 10 - 10HN 11 75 3.0 4 0.16 210 8.3 0,25 0.6 11 - 11HN 12 80 3.1 5 0.20 240 9.4 0,42 0.9 12 - 12HN 13 85 3.3 5 0.20 240 9.4 0,41 0.9 13 - 13HN 14 92 3.6 5 0.20 240 9.4 0,39 0.9 14 - 14HN 15 98 3.9 5 0.20 240 9.4 0,39 0.9 15 - 15HN 16 105 4.1 5 0.20 240 9.4 0,38 0.8 16 - 16HN 17 110 4.3 5 0.20 280 11.0 0,71 1.6 17 - 17HN 18 120 4.7 5 0.20 280 11.0 0,70 1.5 18 - 18HN 19 125 4.9 5 0.20 280 11.0 0,70 1.5 19 - 19HN 20 130 5.1 5 0.20 280 11.0 0,69 1.5 20 - 20HN 21 140 5.5 6 0.24 320 12.6 1,13 2.5 21 - 21HN 22 145 5.7 6 0.24 320 12.6 1,15 2.5 22 24 22

Desig- Dimensions Weight Suitable fornation nuts of series

KMTAd f L

mm in mm in mm in kg lb size

HN 5B 42 1,6 4 0.16 150 5.9 0,09 0.2 5HN 6B 48 1.9 5 0.20 180 7.1 0,16 0.4 6 HN 7B 53 2.1 5 0.20 180 7.1 0,16 0.4 7 HN 8B 58 2.3 5 0.20 210 8.3 0,28 0.6 8 HN 9B 68 2.7 6 0.24 210 8.3 0,27 0.6 1 HN 10B 70 2.8 6 0.24 210 8.3 0,26 0.6 10 HN 11B 75 3.0 6 0.24 210 8.3 0,25 0.6 11 HN 12B 84 3.3 6 0.24 240 9.4 0,42 0.9 12 HN 13B 88 3.4 6 0.24 240 9.4 0,41 0.9 13

Desig- Dimensions Weight Suitable fornation nuts of series

KMTAd f L

mm in mm in mm in kg lb size

HN 14B 95 3.7 8 0.31 240 9.4 0,39 0.9 14 HN 15B 100 3,9 8 0,31 240 9,4 0,39 0.9 15 HN 16B 110 4.3 8 0.31 280 11,0 0,38 0.8 16 HN 17B 115 4.5 8 0.31 280 11.0 0,71 1.6 17 HN 18B 120 4.7 8 0.31 280 11.0 0,70 1.5 18HN 19B 125 4.9 8 0.31 280 11.0 0,70 1.5 19 HN 20B 130 5.1 8 0.31 320 12.6 0,69 1.5 20 HN 22B 140 5.5 8 0.31 320 12.6 1,15 2.5 22

Designation Dimensions Connection Weight Suitable fornuts of series

d D h C KM, KMK, KMF

mm inch mm inch mm inch inch kg lb size

TMFS 0 18 0.7 22,0 0.9 45 1.8 3/8 0,10 0.22 0TMFS 1 22 0.9 28,0 1.1 45 1.8 3/8 0,10 0.22 1TMFS 2 25 1.0 33,0 1.3 61 2.4 1/2 0,20 0.44 2TMFS 3 28 1.1 36,0 1.4 61 2.4 1/2 0,24 0.53 3TMFS 4 32 1.3 38,0 1.5 58 2.3 1/2 0,28 0.62 4TMFS 5 38 1.5 46,0 1.8 58 2.3 1/2 0,38 0.84 5TMFS 6 45 1.8 53,0 2.1 58 2.3 1/2 0,42 0.93 6TMFS 7 52 2.0 60,0 2.4 58 2.3 1/2 0,45 1.00 7TMFS 8 58 2.3 68,0 2.7 58 2.3 1/2 0,61 1.35 8TMFS 9 65 2.6 73,5 2.9 63 2.5 3/4 0,80 1.76 9TMFS 10 70 2.8 78,5 3.1 63 2.5 3/4 0,85 1.87 10TMFS 11 75 3.0 83,5 3.3 63 2.5 3/4 0,90 1.98 11TMFS 12 80 3.1 88,5 3.5 63 2.5 3/4 1,00 2.21 12TMFS 13 85 3.3 94,0 3.7 63 2.5 3/4 1,10 2.43 13TMFS 14 92 3.6 103,0 4.1 80 3.2 1 2,20 4.85 14TMFS 15 98 3.9 109,0 4.3 80 3.2 1 2,30 5.07 15TMFS 16 105 4.1 116,0 4.6 80 3.2 1 2,45 5.39 16TMFS 17 110 4.3 121,0 4.8 80 3.2 1 2,60 5.73 17TMFS 18 120 4.7 131,0 5.2 80 3.2 1 2,90 6.39 18TMFS 19 125 4.9 137,0 5.5 80 3.2 1 3,05 6.73 19TMFS 20 130 5.1 143,0 5.7 80 3.2 1 3,30 7.28 20

TMFS and TMFS N series (page 10)

HN and HN B series (page 10)

89


Designation Suitable for Suitable for nuts of seriesadapter sleeves

H 23, H 31 H 30 KM HM..T HML..T HM 30 HM 31 AN..., N...H 32 H 39 N..

sizes

718909 24 - 30 26 - 32 23 - 30 - - - - 24 - 30 026 - 032718910 30 - 40 34 - 40 30 - 40 - 41 - 42 - - 30 - 40 034 - 040718911 40 - 48 44 - 52 40 - 52 41 - 50 41 - 54 44 - 52 - 40 - 44 044 - 052718912 52 - 64 56 - 68 - 50 - 64 54 - 68 56 - 68 60 - 64 - 056 - 068718913 64 - 80 68 - 88 - 64 - 80 68 - 90 68 - 88 64 - 80 - 068 - 088718914 80 - 500 88 - 530 - 80 - 100 88 - 108 88 - 530 80 - 500 - 088 - 530718915 500 - 600 530 - 630 - 100 - 120 106 - 126 530 - 630 500 - 600 - 530 - 630718916 600 - 750 670 - 800 - - - 670 - 800 600 - 750 - 670 - 800

718 series (page 11)

Designation Dimensions Weightd f L

mm in mm in mm in kg lb

718909 150 - 195 5.9 - 7.7 11,5 0.45 200 7.9 1,1 2.4718910 195 - 250 7.7 - 9.8 13,5 0.53 200 7.9 1,5 3.3718911 250 - 320 9.8 - 12.6 17 0.67 340 13.4 3,2 7.0718912 320 - 400 12.6 - 15.7 19 0.75 325 12.8 4,1 9.0718913 400 - 520 15.7 - 20.5 23 0.91 310 12.2 4,3 9.5718914 520 - 630 20.5 - 24.8 28 1.10 370 14.6 6,9 15.2718915 630 - 750 24.8 - 29,5 36 1.42 350 13.8 8,5 18.7718916 750 - 950 29.5 - 37.4 40 1.57 600 23.6 11,0 24.2

Designation TMHN 7

Dimensions of case (wxdxh) 345 x 255 x 85 mm (13.6 x 10.0 x 3.3 in)

Weight 2,2 kg (4.7 lb)

TMHN 7 (page 11)

Designation Dimensions Connection Weight Suitable fornuts of series

d D h C KM, KMKN, AN

inch inch mm inch mm inch kg lb

TMFS N0 0.755 0.93 23,5 1.8 45 3/8 0,1 0.2 N00TMFS N1 0.880 1.10 28,0 1.8 45 3/8 0,1 0.2 N01TMFS N2 1.005 1.29 33,0 2.4 61 1/2 0,2 0.4 N02TMFS N3 1.130 1.40 36,0 2.4 61 1/2 0,2 0.5 N03TMFS N4 1.380 1.61 41,0 2.3 58 1/2 0,3 0.6 N04TMFS N5 1.568 1.89 48,0 2.3 58 1/2 0,4 0.8 N05TMFS N6 1.755 2.07 52,5 2.3 58 1/2 0,4 0.9 N06TMFS N7 2.068 2.38 60,5 2.3 58 1/2 0,5 1.0 N07TMFS N8 2.255 2.66 67,5 2.3 58 1/2 0,6 1.4 N08TMFS N9 2.536 2.87 73,0 2.5 63 3/4 0,8 1.8 N09TMFS N10 2.693 3.03 77,0 2.5 63 3/4 0,9 1.9 N10TMFS N11 2.294 3.31 84,0 2.5 63 3/4 0,9 2.0 N11TMFS N12 3.161 3.48 89,0 2.5 63 3/4 1,0 2.2 N12TMFS N13 3.380 3.74 95,0 2.5 63 3/4 1,1 2.4 N13TMFS N14 3.630 4.06 103,0 3.2 80 1 2,2 4.9 N14TMFS N15 3.880 4.29 109,0 3.2 80 1 2,3 5.1 AN15TMFS N16 4.161 4.61 117,0 3.2 80 1 2,5 5.4 AN16TMFS N17 4.411 4.84 123,0 3.2 80 1 2,6 5.7 AN17TMFS N18 4.661 5.10 129,5 3.2 80 1 2,9 6.4 AN18TMFS N19 4.943 5.41 137,5 3.2 80 1 3,1 6.7 AN19TMFS N20 5.193 5.63 145,0 3.2 80 1 3,3 7.3 AN20

TMFS and TMFS N series (page 10)

90


Impact rings 10-50 mm (0.4 - 2 in)Sleeves bore dia. 18, 32, 52 mm (0.7, 1.3, 2 in)Packages individually in recyclable plastic material

Designations:

Example TMFT 33-A10/26A = sleeve10 = 10 mm bore of impact ring26 = 26 mm outside dia. of impact ring

Designation TMFT 33 TMFT 7D

Impact rings bore dia. 10 - 50 mm (0.4 - 2 in) bore dia. 5 - 9 mm (0.2 - 0.35 in)Sleeve bore dia. 18, 32, 52 mm (0.7, 1.3, 2 in) bore dia. 10 mm (0.4 in)Hammer TMFT 33-H, weight 1kg (2.2 lb)Dimensions of case 440 x 350 x 95 mm (17.3 x 13.8 x 3.7 in) 140 x 125 x 30 mm (5.5 x 4.9 x 1.2 in)Weight 4,5 kg (9.9 lb) 0,2 g (2.2 lb)No. of rings 33 7

Designation No. of arms Width of grip Effective Maximum Weightlength of arms withdrawal force

qty mm in mm in kN lbf kg lb

TMMP 2x65 2 65 2.6 60 2.4 6,0 1,340 0,4 0.9TMMP 2x170 2 170 6.7 135 5.3 18,0 4,030 1,9 4.2TMMP 3x185 3 185 7.3 135 5.3 24,0 5,380 2,5 5.5TMMP 3x230 3 230 9.1 210 8.3 34,0 7,610 5,5 12TMMP 3x300 3 300 11.8 240 9.4 50,0 11,200 9,0 20

TMMP series (page 18)

TMMA … -1 Safety pin setTMMA … -2 Arm assemblyTMMA … -3 ClawsTMMA … -1K Spindle assembly with nose piecesTMMA … -2K Opening mechanism

TMFT series (page 12)

Designation TMMA 3 TMMA 5 TMMA 8

Maximum withdrawal force 30 kN (6,750 lbf) 50 kN (11,250 lbf) 80 kN (18,000 lbf)Minimum width of grip 36 mm (1.4 in) 52 mm (2.0 in) 75 mm (3.0 in)Effective arm lenght 150 mm (5.9 in) 200 mm (7.9 in) 250 mm (9.8 in)Weight 2,7 kg (6.1 lb) 4,1 kg (9.1 lb) 8,2 kg (18.0 lb)

TMMA series (page 16)

Part ordering details

Designations TMHS 8, TMHS 8/SET

Force max. 80 kNStroke max. 38 mm (1.5 in)

Designations TMHR 8, TMHR 8/SET

Force max. 80 kNStroke max. 175 mm (6.9 in)Working pressure max. 70 MPa (10,150 psi)

Designation Width of grip Width of grip Effective Maximum Weightexternal pull internal pull arm length withdrawal force

mm in mm in mm in kN lbf kg lb

TMMR 40F 23 - 48 0.9 - 1.9 59 - 67 2.3 - 2.6 65 2.6 15 3,400 0,3 0.8TMMR 60F 23 - 68 0.9 - 2.7 62 - 87 2.4 - 3.4 80 3.2 15 3,400 0,4 0.8 TMMR 80F 41 - 83 1.6 - 3.3 93 - 97 3.7 - 8.8 94 3.7 30 6,750 1,0 2.2 TMMR 120F 41 - 124 1.6 - 4.9 93 - 138 3.7 - 5.4 120 4.7 30 6,750 1,2 2.6 TMMR 160F 67 - 164 2.6 - 6.5 114 - 164 4.5 - 6.5 126 5.0 40 9,000 2,3 5.2 TMMR 200F 66 - 203 2.6 - 8.0 114 - 205 4.5 - 8.0 151 5.9 40 9,000 2,6 5.8 TMMR 250F 74 - 254 2.9 - 10.0 132 - 250 5.2 - 9.8 178 7.0 50 11,250 4,4 9.7 TMMR 350F 74 - 350 2.9 - 13.8 135 - 352 5.3 - 13.8 233 9.2 50 11,250 5,1 11.2

TMMR 8 Complete kit of 8 pullers on a counter stand

TMHS 8/SET and TMHR 8/SET (page 17)

TMMR F series (page 18)

91


Designation No. of arms Width of grip Effective length Maximum withdrawal Weightof arms* force

qty mm in mm in kN lbf kg lb

TMMP 6 3 127 5.0 120 4.7 60 13,500 4,0 8.8TMMP 10 3 223 8.7 207 8.2 100 22,500 8,5 19TMMP 15 3 326 12.8 340 13.4 150 33,700 21 46

* other arm lengths available according to part ordering details

TMMP series (page 19)

Designation Hydraulic pump TMJL 100

Maximum pressure 100 MPa (14,500 psi)Volume/stroke 1 cm3 (0.06 in3)Oil container capacity 800 cm3 (48 in3)Pressure hose 3.000 mm (118,1 in) long with quick connection coupling and nipple G 1/4 internal/external threadWeight with gauge 13 kg (29 lb)Oil type filled with SKF LHMF 300

5

1234

qty mm in mm in mm in MPa psi kN lbf kg lb

TMHP 15/260 3 195-386 7.7-15.2 264 10.4 100 3.9 80 11,600 150 33,700 34 75 TMHP 30/170 3 290-500 11.4-19.7 170 6.7 50 2.0 80 11,600 300 67,400 45 99 TMHP 30/350 3 290-500 11.4-19.7 350 13.7 50 2.0 80 11,600 300 67,400 47 104 TMHP 30/600 3 290-500 11.4-19.7 600 23.6 50 2.0 80 11,600 300 67,400 56 123 TMHP 50/140 3 310-506 12.2-19.9 140 5.5 40 1.6 80 11,600 500 112,000 47 104 TMHP 50/320 3 310-506 12.2-19.9 320 12.6 40 1.6 80 11,600 500 112,000 54 119 TMHP 50/570 3 310-506 12.2-19.9 570 22.4 40 1.6 80 11,600 500 112,000 56 123

*Also available without hydraulic pump TMJL 100. Please add suffix ‘X’ to designation when ordering (e.g. TMHP 30/170X)

Designation* No. Width of grip Effective length Stroke Maximum Maximum Weight of arms of arms working pressure withdrawal force

No. Designation Description TMHP 15 TMHP 30 TMHP 50

mm in mm in mm in

1 TMHP ...-1 Arm - length 264 10.4 170 6.7 140 5.52 TMHP ...-2 Arm - length 344 14.2 350 13.7 320 12.63 TMHP ...-3 Arm - length 439 17.3 600 23.6 570 22.44 TMHP ...-4 Arm - length 689 27.1

5 TMHP ...-5 Spindle with centre nibTMHP ...-11 Repair kit


No. Designation Description TMMP 6 TMMP 10 TMMP 15

mm in mm in mm in

1 TMMP ...-1 Arm - length 120 4.7 207 8.2 260 10.22 TMMP ...-2 Arm - length 220 8.6 350 13.8 340 13.43 TMMP ...-3 Arm - length 370 14.5 460 18.1 435 17.14 TMMP ...-4 Arm - length 470 18.5 710 27.9 685 27.0

5 TMMP ...-5 Spindle with centre nib6 TMMP ...-1K Stand, boss and complete set of pins, bolts and link arms (per arm)


6

5

1234

TMHP series (page 19)

Maximum reach (effective arm lenght) 240 mm (9.4 in)Maximum width of grip 250 mm (10 in)Maximum withdrawal force 80 kN (18,000 lbf)Piston displacement 14 mm (0.55 in)Weight 15 kg (33 lb)Dimensions of case 580 x 380 x 60 mm (23 x 15 x 2 in)

92


TMHP 8 (page 20)

Designation TMHP 8

No. Designation Description

1 TMHP-1 Hydraulic spindle (incl. centre nib)

2 TMHP-1K Centre nib, spindle repair kit, o-ring set

3 TMHP-2 Extension piece 50 mm (2 in)4 TMHP-3 Extension piece 100 mm (4 in)


5 TMHP-4 Extension piece 150 mm (6 in)6 TMHP-5 Three arm stand7 TMHP-10 150 mm arm (6 in)8 TMHP-11 200 mm arm (8 in)9 TMHP-12 250 mm arm (10 in)


16

9

2

543

8

7


1 TMHP-1 Hydraulic spindle (incl. centre nib)2 TMHP-1K Centre nib, spindle repair kit, O-ring set3 TMHP-2 Extension piece 50 mm (2 in)4 TMHP-3 Extension piece 100 mm (4 in)5 TMHP-5 Three arm stand 6 TMHP-9 100 mm arm (4 in)7 TMHP-10 150 mm arm (6 in)8 TMBS 100-1 Beam9 TMBS 100-2 Main rods, nuts washers (set)

10 TMBS 100-3 Extension rods (2 pcs) 125 mm (5 in)11 TMBS 100-5 Separator (incl. bolts and nuts)

15

6

2

3

7

1

8

9

410

211

4

Jaw puller:Maximum reach 150 mm (6 in)Maximum width of grip 150 mm (6 in)

Bearing separator:Maximum reach 270 mm (10.6 in)Shaft capacity 20 - 100 mm (0.8 - 4 in)

Overall data:Maximum withdrawal force 80 kN (18 klbf)Piston displacement 14 mm (0.55 in)Weight 16 kg (35 lb)Dimensions of case 580 x 380 x 60 mm (23 x 15 x 2 in)

Designation TMHC 108

TMHC 108 (page 20)


mm in mm in kN lbf mm in kg lb mm in

TMBS 50 115 4.5 0 - 50 0-2 30 6,700 - - 2,5 5.5 285 x 180 x 55 11 x 7 x 2TMBS 100 870 34 20-100 0.8-4 80 18,000 14 0.55 16 35 580 x 380 x 60 23 x 15 x 2TMBS 150 860 34 35-150 1.4-6 80 18,000 14 0.55 22 48 580 x 380 x 60 23 x 15 x 2

Designation Maximum Shaft Maximum Piston Weight Dimensions reach capacity withdrawal force displacement of case

TMBS series (page 21)


1 TMBS 50-1 Beam2 TMBS 50-2 Spindle3 TMBS 50-1K Main rods and washers (set), repl. bolts and nuts (2)


123

2

3

1 8

5 7

4 6

93



1 TMHP-1 TMHP-1 Hydraulic spindle (incl. centre nib)2 TMHP-1K TMHP-1K Centre nib, repl. O-ring set, spindle repair kit3 TMHP-3 TMHP-4 Extension piece 100 / 150 mm4 TMBS 100-1 TMBS 150-1 Beam5 TMBS 100-2 TMBS 150-2 Main rods, nuts, washers (set)6 TMBS 100-3 TMBS 150-3 Extension rods 125 mm (2)7 TMBS 100-4 TMBS 150-4 Extension rods 285/250 mm (4)8 TMBS 100-5 TMBS 150-5 Separator complete

87 2 6 3 5 4 1

Part ordering details TMBS 100 and TMBS 150


1 TMSC-1 Slide hammer complete2 TMSC-5 Adapter3 TMSC-9 Extractor Ø 8 - 10,5 mm (0.31 - 0.41 in)4 TMSC-10 Extractor Ø 10,5 - 12,5 mm (0.41 - 0.49 in)5 TMSC-11 Extractor Ø 13 - 17 mm (0.51 - 0.67 in)6 TMSC-12 Extractor Ø 18 - 22 mm (0.71 - 0.87 in)7 TMSC-13 Extractor Ø 22,5 - 30 mm (0.89 - 1.2 in)8 TMSC-14 Extractor Ø 30 - 36 mm (1.2 - 1.4 in)

Shaft diameter range 8 - 36 mm (0.3 - 1.4 in)Hammer displacement 220 mm (8.7 in)Weight of hammer 1,0 kg (2.2 lb)Total weight 4,0 kg (8.8 lb)Dimensions of case 465 x 135 x 55 mm (18 x 5 x 2 in)

Designation TMSC 6

TMSC series (page 21)


2

1 4

3

Shaft diameter range 30 - 60 mm (1.2-2.4 in)Hammer displacement 300 mm (11.8 in)Weight of hammer 1,6 kg (3.5 lb)Total weight 10 kg (22 lb)Dimensions of case 585 x 235 x 90 mm (23 x 9.3 x 3.5 in)


1 TMSC-2 Slide hammer complete2 TMSC-14 Extractor Ø 30-36 mm (1.2-1.4 in)3 TMSC-15 Extractor Ø 38-50 mm (1.5-2.0 in)4 TMSC-16 Extractor Ø 50-60 mm (2.0-2.4 in)

Designation TMSC 30-60


Suitable bearings 6000 - 6020 6200 - 62176300 - 6313 6403 - 6410

Effective length A1 - 140 mm (5.5 in) A2 - 140 mm (5.5 in)A3 - 140 mm (5.5 in) A4 - 170 mm (6.7 in)A5 - 170 mm (6.7 in) A6 - 170 mm (6.7 in)

Weight 3,2 kg (7 lb)Dimensions of case 315 x 250 x 70 mm (12.4 x 9.8 x 2.8 in)

Designation TMMD 61

TMMD 61 (page 22)

94


TMMD A1 Puller armTMMD A2 Puller armTMMD A3 Puller armTMMD A4 Puller arm

TMMD A5 Puller armTMMD A6 Puller armTMMD M12 Spindle, nut and handleTMMD M16 Spindle, nut and handle

Suitable bearings 6021-6032 6213-6230 6309-6321 6406-6417

Effective length of arms 600 mm (24 in)Overall puller spread 60 - 210 mm (2.4 - 8.3 in)Adapter diameters 16 - 32 mm (0.6 - 1.3 in)Weight 9 kg (20 lb)Dimensions of case 410 x 320 x 125 mm (16 x 13 x 5 in)

Designation TMBP 20

TMBP 20 (page 23)


1 TMBP 20-1K Beam2 Spindle (incl. thrust nut and nose piece)3 Main rods (2) incl. nuts and washers

4, 5 TMBP 20-2K Extension rods -195 mm (2) / Extension rods -295 mm (2)6, 7, 8 TMBP 20-3K Bearing adapters no. 7 (2) / Bearing adapters no. 8 (2) / Bearing adapters no. 9 (2)

9, 10, 11 TMBP 20-4K Bearing adapters no. 10 (2) / Bearing adapters no. 11 (2) / Bearing adapters no. 12 (2)

1

6 7 8 9 10 11

2 3 4 5

Designation TMMC 3040 TMMC 3140 TMMC 3044

Suitable for CARBTM bearing C 3040 K C 3140 K C 3044 KPuller arm designation TMMC A8.5 TMMC A10 TMMC A8.5Number of arms 3 3 3Gripping diameter 291 mm (11.5 in) 307 mm (12.1 in) 316 mm (12.4 in)Arm reach length 175 mm (6.9 in) 210 mm (8.3 in) 175 mm (6.9 in)Claw length 5,7 mm (0.23in) 6,5 mm (0.25 in) 5,7 mm (0.23in)Thread of dismounting screws M10 M10 M10Maximum withdrawal force 15 kN (3,300 lbf) 20 kN (4,500 lbf) 15 kN (3,300lbf)Weight 5,3 kg (11.7 lb) 6,3 kg (13.9 lb) 6,0 kg (13.2 lb)


Suitable for CARBTM bearing C 3144 K C 3048 K C 3052 KPuller arm designation TMMC A10 TMMC A8.5 TMMC A10Number of arms 3 3 3Gripping diameter 334 mm (13.1 in) 334 mm (13.1 in) 368 mm (14.5 in)Arm reach length 210 mm (8.3 in) 175 mm (6.9 in) 210 mm (8.3 in)Claw length 6,5 mm (0.25 in) 5,7 mm (0.23 in) 6,5 mm (0.25 in)Thread of dismounting screws M10 M10 M10Maximum withdrawal force 20 kN (4,500 lbf) 15 kN (3,300 lbf) 20 kN (4,500 lbf)Weight 7,0 kg (15.4 lb) 6,5 kg (14.3 lb) 7,5 kg (16.5 lb)


Suitable for CARBTM bearing C 3152 K C 3156 K C 3160 KPuller arm designation TMMC A13 TMMC A13 TMMC A13Number of arms 3 3 3Gripping diameter 391 mm (15.4 in) 414 mm (16.3 in) 447 mm (17.6 in)Arm reach length 250 mm (9.9 in) 250 mm (9.9 in) 250 mm (9.9 in)Claw length 9,5 mm (0.37 in) 9,5 mm (0.37 in) 9,5 mm (0.37 in)Thread of dismounting screws M10 M10 M10Maximum withdrawal force 25 kN (5,600 lbf) 25 kN (5,600 lbf) 25 kN (5,600 lbf)Weight 9,4 kg (20.7 lb) 9,8 kg (21.6 lb) 10,6 kg (23.4 lb)

CARBTM bearing pullers TMMC series (page 24)

Designation Description Designation Description

Ordering details TMMD 61


95


Material MDFDimensions 590 x 890 x 18 mm (23.2 x 35 x 0.7 in)Weight without contents 7 kg (15.4 lb)Contents TMSC 6 puller / TMHC 108 puller

TMMD 61 puller / TMHP-11 arm (3x)

Designation TMMB 100

TMMB 100 (page 24)

Power:Voltage 100 - 240 V, 50 - 60 HzPower (maximum) 350 WattCosine ϕ > 0,95Component size range:- inner diameter 20 ... 100 mm (0.8 ... 4 in)- width < 50 mm (2 in)- weight up to approximately 5 kg (11 lb)Control functions:Time control 0 - 60 minutes Temperature control 0 - 200 ºC (32 - 392 ºF)

Accuracy temperature control ± 3 ºC (6 ºF)Maximum temperature 200 ºC (392 ºF)Dimensions:Control box 150 x 330 x 105 mm (6 x 13 x 4 in)Heating clamp 114 x 114 mm (4.5 x 4.5 in)Operating space heating clamp 52 x 52 mm (2.0 x 2.0 in)Complete unit in carrying case 370 x 240 x 130 mm (15 x 9 x 5 in)Length clamp cable 75 cm (30 in)Length power cable 2 m (80 in)Length temperature probe cable 100 cm (40 in)Weight complete unit 4,5 kg (10 lb)

Designation TMBH 1

TMBH 1 (page 27)

Designation for continuous use * — — TIH 065 TIH 125(with fan) (with fan)

Power consumption (maximum) 3,5 kVA / 2,2 kVA / 3,0 kVA 3,5 kVA / 2,2 kVA / 3,0 kVA 8,0 kVA 12,0 kVA

Recommended maximum weight ** 30 kg 30 kg 60 kg 250 kg(70 lb) (70 lb) (140 lb) (550 lb)

Temperature control — • • •- range — 0-250 °C (32-482 °F) 0-250 °C (32-482 °F) 0-250 °C (32-482 °F)- magnetic probe — • • •- accuracy (electronics) — 3 °C (5 °F) 3 °C (5 °F) 3 °C (5 °F)

Time control • • • •- range (min) 0-15 0-60 0-60 0-60- accuracy 10 s 0,01 s 0,01 s 0,01 s

Maximum temperature (approx.) ** 400 °C 400 °C 400 °C 400 °C(750 °F) (750 °F) (750 °F) (750 °F)

Thermometer mode — • • •

Bearing mode — — • •

Power reduction PLD*** PLD*** 50% 50%

Demagnetisation acc. • • • •to SKF norms (automatic)

Can heat sealed bearings • • • •

Can heat pre-greased bearings • • • •

Error guiding codes — • • •

Thermal overload protection • • • •

Power overload protection • • • •

Maximum magnetic flux 1,4 T 1,4 T 1,5 T 1,6 T

Operating area (w x h) 130 x 95 mm 200 x 135 mm 320 x 200 mm (5.1 x 3.7 in) (7.9 x 5.3 in) (12.6 x 7.9 in)

Dimensions (w x d x h) 290 x 255 x 225 mm 525 x 354 x 304 mm 710 x 390 x 460 mm(11.4 x 10.0 x 8.9 in) (21 x 14 x 12 in) (28 x 15 x 18 in)

Weight -heater body 19 kg (42 lb) 19 kg (42 lb) 42 kg (93 lb) 77 kg (170 lb)-with yokes 27 kg (60 lb) 27 kg (60 lb) 57 kg (125 lb) 102 kg (225 lb)

Heater model options* Designation Designation Designation Designation

TIH 025 (230V) 50/60 Hz TIH 030 (230V) 50/60 Hz TIH 060 (380V) 50 Hz TIH 120 (380V) 50 HzTIH 025/115V 50/60 Hz TIH 030/115V 50/60 Hz TIH 060/200V 50/60 Hz TIH 120/200V 50/60 HzTIH 025/100V 50/60 Hz TIH 030/100V 50/60 Hz TIH 060/220V 50 Hz TIH 120/220V 50 Hz

TIH 060/440V 50 Hz TIH 120/440V 40 HzTIH 060/460V 60 Hz TIH 120/460V 60 HzTIH 060/500V 50 Hz TIH 120/500V 50 HzTIH 060/575V 60 Hz TIH 120/575V 60 Hz

TIH series (page 28)

96


Standard yokes 14 x 14 x 240 mm 20 x 20 x 330 mm 80 x 80 x 480 mm (0.6 x 0.6 x 9.4 in) (0.8 x 0.8 x 13 in) (3.2 x 3.2 x 19 in)30 x 30 x 240 mm 40 x 40 x 330 mm(1.2 x 1.2 x 9.4 in) (1.6 x 1.6 x 13 in) 55 x 55 x 240 mm 65 x 65 x 330 mm (2.2 x 2.2 x 9.4 in) (2.6 x 2.6 x 13 in)

Yoke tray • • — —

Housing material Glass-fibre reinforced polyester Aluminium Aluminium

Warranty period 3 years 3 years 3 years 3 years

Swivel arm — — TIH 060-20 —

Heater model options* Designation Designation Designation Designation

TIH 025 (230V) 50/60 Hz TIH 030 (230V) 50/60 Hz TIH 060 (380V) 50 Hz TIH 120 (380V) 50 HzTIH 025/115V 50/60 Hz TIH 030/115V 50/60 Hz TIH 060/200V 50/60 Hz TIH 120/200V 50/60 HzTIH 025/100V 50/60 Hz TIH 030/100V 50/60 Hz TIH 060/220V 50 Hz TIH 120/220V 50 Hz

TIH 060/440V 50 Hz TIH 120/440V 40 HzTIH 060/460V 60 Hz TIH 120/460V 60 HzTIH 060/500V 50 Hz TIH 120/500V 50 HzTIH 060/575V 60 Hz TIH 120/575V 60 Hz

t (min) 20 - 110 ºC (inner ring temp. increase)



Optional yokes TIH 025/030-12 10 x 10 x 240 mm TIH 060-12 30 x 30 x 330 mm TIH 120-2 40 x 40 x 480 mm(0.4 x 0.4 x 9.4 in) (1.2 x 1.2 x 13 in) (1.6 x 1.6 x 19 in)

TIH 025/030-10 20 x 20 x 240 mm TIH 060-13 35 x 35 x 330 mm TIH 120-3 65 x 65 x 480 mm(0.8 x 0.8 x 9.4 in) (1.4 x 1.4 x 13 in) (2.6 x 2.6 x 19 in)

TIH 025/030-11 45 x 45 x 240 mm TIH 060-14 50 x 50 x 330 mm TIH120-13 50 x 50 x 480 mm(1.8 x 1.8 x 9.4 in) (2.0 x 2.0 x 13 in) (2.0 x 2.0 x 19 in)

TIH 060-15 25 x 25 x 330 mm(1.0 x 1.0 x 13 in)

Mobile trolley TIH 060/120-15 TIH 060/120-15 TIH 060/120-15

Heating example

63 series62 series60 series

223 series232 series231 series222 series

* = Indicate voltage when ordering ** = Depends on operating voltage and workpiece material/geometry*** = Power limitation device

Power consumption 24 kVA(maximum)

Recommended maximum Bearing 700 kg weight (1,500 lb)

Other components 300 kg (660 lb)

Temperature control •- range 0 -250 °C (32-482 °F)- magnetic probe •- accuracy (electronics) 3 °C (5 °F)

Time control •- range (min) 0-60- accuracy 0,01 s

Maximum temperature 400 °C (750 °F)(approx)

Thermometer mode •

Bearing mode •Power reduction 50%

Demagnetisation acc. Below 2 A/cmto SKF norms (automatic)

Can heat sealed bearings •

Can heat pre-greased bearings •

Error guiding codes •

Thermal overload protection •

Power overload protection •

Maximum magnetic flux 1,5 T

Operating area (w x h) 330 x 355 mm (12.9 x 13.9 in)

Dimensions (w x d x h) 750 x 400 x 935 mm (29.4 x 15.7 x 36.8 in)

Weight - with yoke 300 kg (660 lb)

Standard yoke 100 x 100 x 570 mm(4 x 4 x 22.4 in)

Warranty period 3 years

Heater model options Designation VoltageOther power supplies TIH 240 400V/50 Hzavailable on request TIH 240/460V 460V/60 Hz

Heater model options Designation VoltageOther power supplies TIH 240 400V/50 Hzavailable on request TIH 240/460V 460V/60 Hz

TIH series (page 28)

TIH 240 series (page 29)

Bearing bore (mm) Bearing bore (mm) Bearing bore (mm)

97


97

Designation EAZ 80/130 EAZ 130/170

Connection cable Length 5 m 16 ft 5 m 16 ftDimensions A 285 mm 11.2 in 335 mm 13.2 in

B 115 mm 4.5 in 120 mm 4.7 inC 555 mm 21.8 in 630 mm 24.8 inD 305 ... 360 mm 12.0 ... 14.1 in 335 ... 380 mm 13.2 ... 15.0 ina 134 mm 5.3 in 180 mm 7.1 inb 50 mm 2.0 in 50 mm 2.0 inc 35 mm 1.4 in 30 mm 1.2 ind 80 ... 132 mm 3.1... 5.2 in 130 ... 172 mm 5.1 ... 6.8 in

Weight 28 kg 62 lb 35 kg 77 lb

EAZ series (page 30)

EAZ 80/130A 2 x 230V/50Hz 40 AEAZ 80/130B 2 x 400V/50Hz 45 AEAZ 80/130C 2 x 460V/60Hz 25 AEAZ 80/130D 2 x 415V/50Hz 35 AEAZ 130/170A 2 x 230V/50Hz 60 AEAZ 130/170B 2 x 400V/50Hz 45 A

Designation Powersupply Current

EAZ 130/170D 3 x 230V/50Hz 43 AEAZ 130/170E 3 x 400V/50Hz 35 AEAZ 130/170F 3 x 460V/60Hz 23 AEAZ 130/170G 3 x 420V/60Hz 30 AEAZ 130/170H 3 x 415V/50Hz 30 A

Designation Powersupply Current

Other voltages on request.


Heater Voltage Bearing Coil Connecting Control Dimensions ring Dimensions heaterdesig- class designation Current cable cabinetnation consumption

d B F G C D A

A mm mm mm mm mm mm mm

EAZ 166 LV 314625 170 A07 RN - F 3 x 25 SS 250 145 p6 155 166 169 350 370 176MV 100 A07 RN - F 3 x 16HV 75 A07 RN - F 3 x 16

EAZ 169 LV 313924 A 170 A07 RN - F 3 x 25 SS 250 145 p6 156 169 172 355 378 176MV 100 A07 RN - F 3 x 16HV 75 A07 RN - F 3 x 16




EAZ 181 LV 315642/ 180 A07 RN - F 3 x 35 SS 250 165,1 p6 165 181 184 355 378 190MV VJ202 105 A07 RN - F 3 x 16HV 80 A07 RN - F 3 x 16

EAZ 190 LV BC4B 140 A07 RN - F 3 x 25 SS 250 170 p6 130 190 193 375 402 151MV 635122 80 A07 RN - F 3 x 16HV 60 A07 RN - F 3 x 16


EAZ 212 LV 314199 B 200 A07 RN - F 3 x 35 SS 250 190 p6 200 212 215 385 412 217MV 115 A07 RN - F 3 x 25HV 90 A07 RN - F 3 x 16

EAZ 222-1 LV 314553 190 A07 RN - F 3 x 35 SS 250 200 p6 170 222 225 385 412 190MV 110 A07 RN - F 3 x 16HV 85 A07 RN - F 3 x 16

EAZ 222-2 LV 313893 215 A07 RN - F 3 x 25 SS 250 200 p6 200 222 225 395 422 217MV 125 A07 RN - F 3 x 16HV 95 A07 RN - F 3 x 16


98


Designation 729659 C729659 C/110V

Voltage 729659 C 230V (50/60Hz)729659 C/110V 115V (50/60Hz)

Power 1.000 WTemperature range 50 - 200 °C (120 - 390 °F)Plate dimensions (l x w) 380 x 178 mm (15 x 7 in)Height of cover 50 mm (2 in)Overall dimensions (l x w x d) 400 x 240 x 130 mm (16 x 10 x 5 in)Weight 4,7 kg (10 lb)Length of connection cable 2 metres (6.6 ft) (earth connection required)

Each heater is available in three different voltage versions as follows:

LV Low 190 to 230VMV Medium 400 to 480VHV High 500 to 575V

Please add the corresponding class as a suffix to the designation when ordering(e.g. EAZ 166 HV).

Voltage classification EAZ series

729659 C (page 31)

Designation Designation

SS 250A 230V, 50Hz, 250A SS 250B 400V, 50Hz, 250ASS 250C 460V, 60Hz, 250A SS 350A 230V, 50Hz, 350ASS 350B 400V, 50Hz, 350A SS 350C 460V, 60Hz, 350A

A special control cabinet suitable for handling two heaters at the same time is also available.

SSD 350A 230V, 50Hz, 350A (2x) SSD 350B 400V, 50Hz, 350A (2x)SSD 350C 460V, 60Hz, 350A (2x)

Control cabinets EAZ series

Heater Voltage Bearing Coil Connecting Control Dimensions ring Dimensions heaterdesig- class designation Current cable cabinetnation consumption

d B F G C D A

A mm mm mm mm mm mm mm


EAZ 244 LV 313894 B 300 A07 RN - F 3 x 50 SS 350 220 r6 225 244 247 410 435 247MV 175 A07 RN - F 3 x 35 SS 250HV 130 A07 RN - F 3 x 25

EAZ 246 LV 313839 260 A07 RN - F 3 x 50 SS 350 220 r6 192 246 249 410 435 214MV 150 A07 RN - F 3 x 25 SS 250HV 115 A07 RN - F 3 x 25


EAZ 265 LV 635194 240 A07 RN - F 3 x 35 SS 250 240 r6 180 265 268 430 457 201MV 140 A07 RN - F 3 x 25HV 105 A07 RN - F 3 x 16



EAZ 308 LV 314719 C 335 A07 RN - F 3 x 50 SS 350 280 r6 275 308 311 460 490 296MV 195 A07 RN - F 3 x 35 SS 250HV 145 A07 RN - F 3 x 25

EAZ 312 LV 313822 285 A07 RN - F 3 x 50 SS 350 280 r6 220 312 315 465 490 238MV 165 A07 RN - F 3 x 25 SS 250HV 125 A07 RN - F 3 x 25 SS 250

EAZ 332 LV 314484 D 365 A07 RN - F 3 x 70 SS 350 300 r6 300 332 335 480 500 322MV 210 A07 RN - F 3 x 35 SS 250HV 160 A07 RN - F 3 x 25

EAZ 378 LV 314485 A 375 A07 RN - F 3 x 70 SS 350 340 r6 350 378 381 525 555 368MV 240 A07 RN - F 3 x 50 SS 250HV 205 A07 RN - F 3 x 35


99


Designation 721867 / Bearing designation; (e.g. 721867/NU 216)

Material aluminiumMaximum temperature 400 °C (750 °F)


Designation TMBA G11W

Pack size 1 pairSize 9Colour white/blue

Designation TMBA G11

Pack size 1 pairSize 9Colour white

Designation TMBA G11H

Pack size 1 pairSize 10Colour blue

TMBA G11W,TMBA G11 and TMBA G11H (page 32)

Measuring units

Type of laser Diode laserLaser wave length 670 - 675 nmLaser class 2Maximum laser power 1 mWMaximum distance between measuring units 1 m (3 ft)Type of detectors Single axis PSD, 10 x 10 mm (0.4 x 0.4 in)Dimensions 118 x 101 x 30 mm (4.6 x 4.0 x 1.2 in)Weight 200 g (7 oz)

Display unit

Battery type- TMEA 1 and TMEA 1P 3 x 1,5V LR14 Alkaline- TMEA 1PEx Special type of LR14 batteries

Operating time 24 hours continuous operationDisplayed resolution 0,01 mm (0.1 mil for US version)Dimensions 160 x 140 x 51 mm (6.3 x 5.5 x 2.0 in)Weight 0,5 kg (1.1 lb)

Printer unit (TMEA 1P and TMEA 1PEx systems)

Printing system Thermal dot matrixPower Rechargeable battery - 12V maximumOperation time 60 minutes continuous operation with fully charged battery

Complete system

Shaft diameter range 30 - 500 mm (1.2 - 20 in)Accuracy of system < 2%Temperature range 0 - 40 °C (32 - 104 °F) without printerOperating humidity < 90 % without printerCarrying case dimensions

- TMEA 1 455 x 368 x 166 mm (17.9 x 14.5 x 6.5 in) - TMEA 1P and TMEA 1PEx 534 x 427 x 157 mm (21.0 x 16.8 x 6.2 in)

Total weight (incl. case)- TMEA 1 6,9 kg (15.2 lb)- TMEA 1P and TMEA 1PEx 8,9 kg (19.6 lb)

Calibration certificate Valid for two yearsWarranty 12 months

TMEA 1 series (page 35)


TMEA 1P Shaft alignment tool with printerTMEA 1PEx Intrinsically safe shaft alignment tool with printerTMEA 1 Shaft alignment toolTMEA F7 Set with 3 pairs of connection rods (short, 150 mm, standard, 220 mm and long, 320 mm)TMEA P1-10 UK and Australian mains adaptor for the printerTMEA 1P/US Shaft alignment tool with printer - USA versionTMEA 1PEx/US Intrinsically safe shaft alignment tool with printer - USA versionTMEA 1/US Shaft alignment tool - USA version

Products and accessories designation

100


Measuring distance 50 mm - 6000 mm (2 in to 20 ft)Laser type Diode laser, class 2, < 1mWLaser wavelength 632 nmMeasurement accuracy:Angular Better than 0,2°Linear Better than 0,5 mmBattery type 2 AA (R6) 1.5V batteries per unitBattery life 20 h continuous operation

(average using alkaline batteries)

Housing material Precision moulded PADimensions (h x w x d) 68 x 92 x 65 mm (2.6 x 3.6 x 2.6 in)Weight 300 g (10.5 oz) per unitWarranty 12 months

Spare parts

TMEB G1 Set of V-guides TMEB 1-1 Individual laser unit

Designation TMEB 1

TMEB 1 (page 38)

Designation Number A B C Thicknessof shimsper set

mm mm mm mm

Designation Number A B C Thick-of shims nessper set

mm mm mm mm

TMAS series (page 39)

inch inch inch inch

TMAS 2-002 10 2 2 0.5 0.002TMAS 2-005 10 2 2 0.5 0.005TMAS 2-010 10 2 2 0.5 0.010TMAS 2-025 10 2 2 0.5 0.025TMAS 2-050 10 2 2 0.5 0.050TMAS 2-075 10 2 2 0.5 0.075




inch inch inch inch

TMAS 50-005 10 50 50 13 0,05TMAS 50-010 10 50 50 13 0,10TMAS 50-020 10 50 50 13 0,20TMAS 50-025 10 50 50 13 0,25TMAS 50-040 10 50 50 13 0,40TMAS 50-050 10 50 50 13 0,50TMAS 50-070 10 50 50 13 0,70TMAS 50-100 10 50 50 13 1,00TMAS 50-200 10 50 50 13 2,00





Designation Contents Weight

TMAS 340 340 shims in 9 thicknesses and 2 sizes 17 kg (37.4 lb)TMAS 360 360 shims in 6 thicknesses and 3 sizes 12 kg (26.4 lb)TMAS 510 510 shims in 9 thicknesses and 3 sizes 14 kg (30.8 lb)TMAS 720 720 shims in 9 thicknesses and 4 sizes 30 kg (66 lb)

Kits of single slot shims (metric)

101


Designation Number A B C Thicknessof shimsper set

mm mm mm mm

Designation Number A B C Thick-of shims nessper set

mm mm mm mm

TMAS D series (page 40)

TMAS D3-005 5 80 230 22 0,05TMAS D3-010 5 80 230 22 0,10TMAS D3-025 5 80 230 22 0,25TMAS D3-050 5 80 230 22 0,50TMAS D3-100 5 80 230 22 1,00






TMAS 360A 2 sets of each TMAS 2, TMAS 3 and TMAS 4 series

Kits of single slot shims (inch)

Temperature range -30 to 200 °C (-22 to 392 °F)Accuracy (at 25 C / 77 °F) ≤ 1 °C (≤ 2 °F)Probe K-type thermocouple (NiCr/NiAl)Response time 5,5 sDimensions 151 x 35 x 27 mm (5.9 x 1.4 x 1.1 in)Weight 110 g (3.9 oz) (incl. battery)

Battery 9V Alkaline, IEC 6LR61Battery lifetime approx. 1.000 hoursSwitch off automatic after 2 minutesDisplay indications 1: broken probe connection

L: low batteryResolution 1 °C / 1 °F

Designation TMTP 1

TMTP 1 (page 40)

TMTP 1 (for °C readout) ThermoPenTMTP 1/F (for °F readout) ThermoPenTMTP 1-1K Probe tip

Temperature range -50 to 900 °C (-58 to 1652 °F)Resolution 1°Accuracy (at 25 °C / 77 °F) 0,3% of rdg ± 1 °C (± 2 °F)Temperature compensation < 0,05 °C/°C (< 0,05 °F/°F)Battery 9V Alkaline, IEC 6LR61

Battery lifetime 500 hoursSensor type K-type thermocouple (NiCr/NiAl)Probe types works with the range of SKF probesDimensions (instruments) 175 x 75 x 22 mm (7 x 3 x 1 in)

Designation TMDT 900

TMDT 900 (page 41)

TMDT 900 Thermometer without probeTMDT 900A Thermometer with probe TMDT 2-30



102


Speed range 3 to 99.999 rpmWith linear speed sensor TMOT 1 15.000 rpm

TMOT 6 15.000 rpm, 1.500 m/min or 4,500 ft/min

TMOT 6/LASER 15.000 rpm, 1.500 m/min or 4,500 ft/min

Optical range 0,05 to 1 m (2 to 40 in) from reflective targetTMOT 6/LASER 2 m (80 in)

Operating angle ± 45 degrees to targetTMOT 6/LASER ± 80 degrees to target

Accuracy ± 0,01 % ± 1 digit of readingResolution fixed range - 1 digit / auto range - max. 0,001Time base micro-processor controlledSampling time above 75 rpm - 0,8 s / at 3 rpm - 20,0 s.Optical system single lens reflex; visible light beam

TMOT 6/LASER 1 mW class 2 laser diode

Display 5 digit LED with floating decimalLow battery indication red LED indicatorOverrange indication flashing displayUnderrange indication display reverts to zeroOn target indication green LED indicatorMemory last reading held automatically for 10 s;

recall within one minuteSwitch off automatic after 10 secondsRemote input 3,5 mm stereo jack for TMOT 6-56Power source 4 x 1,5 V Alkaline cell, IEC LR6Dimensions 185 x 67 x 54 mm (7.3 x 2.6 x 2.1 in)Weight 300 g (0.7 lb) (incl. batteries)

Designation TMOT 1 / TMOT 6 / TMOT 6/LASER

TMOT series (page 43)

TMOT 1 Single function tachometerTMOT 6 Multi function tachometerTMOT 6/LASER Multi function laser tachometer

TMOT 6/SET Complete setTMOT 6-56 Remote optical sensorTMOT 6-57 Adapter for contact measurement (includes m/min and ft/min contact wheels)TMOT 6-59 Reflective tapeTMOT 6-60 Installation bracket (for permanent fixing of remote optical sensor)


Frequency range 30 Hz - 15 kHzOperating temperature 0-45 °C (32-113 °F)Output volume adjustableMinimum recorder impedance 1.000 OhmMaximum recorder output 250 mVHeadset 8 Ohm Piezo type (with ear defender)

Battery 9V Alkaline IEC 6LR61Battery lifetime approx. 20 hours; low battery indicationDimensions 190 x 60 x 30 mm (7.5 x 2.4 x 1.2 in)Weight (instrument) 200 g (7 oz)Weight (headset) 250 g (9 oz)

Designation TMST 2

TMST 2 (page 44)

TMST 2 Electronic stethoscope

TMST 2 Instrument kitTMST 2-2A High quality headset

TMST 2-3 Probe setTMST 2-1 Handset


Temperature range -200 to 1.350 °C (-330 to 2,460 °F)Resolution 0,1° (-100 to 1.000 °)

1° (≤ -100°, ≥ 1.000°)Accuracy (entire range) ≤ 0,5 °C/0,9 °FAnalogue output 1,0mV/°C or °F

Load resistance RL ≥ 10kΩBattery 9V Alkaline IEC 6LR61Battery lifetime ≥ 100 hoursSensor types K-type thermocouple (NiCr/NiAl)Dimensions (instrument) 175 x 75 x 22 mm (7 x 3 x 1 in)

Designation TMDT 2

TMDT 2 (page 41)

Probe type K-type thermocouple (NiCr/NiAl) acc. IEC 584 Class 1Accuracy ± 1,5 °C (2.7 °F) up to 375 °C (707 °F) ± 0,4% of reading

above 375 °C (707 °F)Handle 110 mm (4.3 in) long

Cable 1.000 mm (39.4 in) spiral cable (excl. TMDT 2-31, -38, -39, 41)

Plug K-type mini-plug (1.260-K)

TMDT 2 Instrument, surface probe, battery and instructions for use in carrying caseTMDT 2-1 Instrument, battery and instructions for use


K-type thermocouple probes (page 42-43)

103


Suitable oil types mineral and synthetic oilsRepeatability better than 5%Read-out green/red grading + numerical value (0 - 100)

Battery 9V Alkaline IEC 6LR61Battery lifetime > 150 hours or 3.000 testsDimensions 250 x 95 x 32 mm (instrument) (9.8 x 3.7 x 1.3 in)

Designation TMEH 2

TMEH 1 (page 44)

TMEH 1 OilCheck monitor

TMEH 1 SKF OilCheck


Vibration pick-up piezo electric acceleration integrated sensor (compression type)

Measurement range 0,7 to 55,0 mm/s (RMS) by 0,1 increment0,01 to 3,00 in/s (eq. Peak) by 0,01 incrementtolerance: ± 10% (2 digits)0,1 to 19,99 gE by 0,1 increment

Frequency range overall vibration - 10 Hz to 1.000 Hz acceleration enveloping - 10 kHz to 30 kHz

Display measurement value: 3,5 digit LCD

Display cycle approximately 1 second

Overload indication OVER

Battery replacement indication BATT

Hold indication HOLD

Power 2 x CR2032 lithium batteries

Battery lifetime 170 mA hours current consumptionmeasurement mode: 7,5 mA

HOLD mode 3,0 mA

Auto power off function power is turned offapproximately 2 minutes after last ON or HOLD operation

Dimensions 17,8 x 30,5 x 157,5 mm (0.7 x 1.2 x 6.2 in)

Weight approximately 77 g (2.7 oz) with batteries

Ambient operating conditions -10 °C to 50 °C (14 °F to 122 °F)

20 to 90% relative humidity

Designation CMVP 40 / CMVP 50

CMVP series (page 46)

CMPV 40 in/s eq. peakCMPV 50 mm/s RMS

Designation Blade Bladelength thickness

mm in mm in mm in mm in

729865 A 100 4.0 0,03 0.0012 0,08 0.0031 0,14 0.0055

0,04 0.0016 0,09 0.0035 0,15 0.0059

0,05 0.0020 0,10 0.0039 0,20 0.0079

0,06 0.0024 0,12 0.0047 0,30 0.0118

0,07 0.0028

729865 B 200 8.0 0,05 0.0020 0,18 0.0071 0,60 0.0236

0,09 0.0035 0,19 0.0075 0,65 0.0256

0,10 0.0039 0,20 0.0079 0,70 0.0276

0,11 0.0043 0,25 0.0098 0,75 0.0295

0,12 0.0047 0,30 0.0118 0,80 0.0315

0,13 0.0051 0,35 0.0138 0,85 0.0335

0,14 0.0055 0,40 0.0157 0,90 0.0354

0,15 0.0059 0,45 0.0177 0,95 0.0374

0,16 0.0063 0,50 0.0197 1,00 0.0394

0,17 0.0067 0,55 0.0216


Designation Blade Bladelength thickness

in in in in

729865 USA 4.0 0.0015 0.0040 0.0080

0.0020 0.0045 0.0090

0.0025 0.0050 0.0100

0.0030 0.0060 0.0120

0.0035 0.0070

729865 USB 8.0 0.0020 0.0090 0.0280

0.0025 0.0100 0.0300

0.0030 0.0120 0.0320

0.0035 0.0140 0.0340

0.0040 0.0160 0.0360

0.0045 0.0180 0.0380

0.0050 0.0200 0.0400

0.0060 0.0220

0.0070 0.0240

0.0080 0.0260

Feeler gauges 729865 series (page 45)

104


DIN 51825 code K2K-30 K3K-30

NLGI consistency class 2 3

Soap type Lithium Lithium

Colour Red brown Amber

Base oil type Mineral Mineral

Operating temperature range, ºC (ºF) -30 to 120 -30 to 120 (-22 to 250) (-22 to 250)

Dropping point DIN ISO 2176, ºC (ºF) 180 min. (356 min.) 180 min. (356 min.)

Base oil viscosity: 40 ºC, mm2/s 110 120-130100 ºC, mm2/s 11 12

Penetration DIN ISO 2137:60 strokes, 10-1 mm 265 - 295 220 - 250100.000 strokes, 10-1 mm +50 max. (325 max.) 280 max.

Mechanical stability:Roll stability, 50 hrs at 80 ºC, 10-1 mm - 295 max.SKF V2F test 'M' 'M'

Corrosion protection:SKF Emcor: - standard ISO 11007 0 - 0 0 - 0

- water washout test 0 - 0 0 - 0- salt water test (100% seawater) - -

Water resistanceDIN 51 807/1, 3 hrs at 90 ºC 1 max. 2 max.

Oil separation DIN 51 817, 7 days at 40 ºC, static, % 1 - 6 1 - 3

Lubrication ability SKF R2F, running test B at 120 ºC Pass -

Copper corrosionDIN 51 811, 110 ºC 2 max. 2 max. (130 °C/266 °F)

Rolling bearing grease life SKF R0F test L50 life at 10.000 rpm, hrs - 1000 min.

- at 130 °C (266 °F)

EP performanceWear scar DIN 51350/5, 1.400 N, mm - -4-ball test, welding load DIN 51350/4 - -

Available pack sizes35, 200 g tube -420 ml cartridge 420 ml cartridge1, 5, 18, 50, 180 kg 1, 5, 18, 50, 180 kg- -

Designation LGMT 2/(pack size) LGMT 3/(pack size)

LGMT 2 LGMT 3

Standard bearing greases (page 56-57)

105


KP2G-20 K2G-50 K2N-40 K3N-20 K2G-20

2 2 2-3 3 2

Lithium Lithium Di-urea Lithium complex Aluminium complex

Light brown Yellow Light brown Blue Transparent

Mineral Di-ester Mineral Mineral Medical white oil

-20 to 110 -55 to 110 -40 to 150 -20 to 150 -20 to 110(-4 to 230) (-65 to 230) (-40 to 300) (-4 to 300) (-4 to 230)

180 min. (356 min.) 180 min. (356 min.) 240 min. (464 min.) 250 min. (482 min.) 250 min. (482 min.)

200 15 96 110 13016 3,7 10,5 13 7,3

265 - 295 265 - 295 245 - 275 220 - 250 265 - 295+50 max. (325 max.) 360 max. 365 max. 280 max. +30 max.

+50 max. - 365 max. 350 max. -'M' - - 'M' -

0 - 0 0 - 1 0 - 0 0 - 0 0 - 00 - 0 - 0 - 0 - -- - 0 - 0 - -

1 max. 1 max. 1 max. 2 max. 1 max.

2 - 5 1 - 5 0,7- 3 1 - 5 (60 °C/140 °F) 1 - 5

Pass - Pass - -

2 max. 2 max. 1 max. (150 °C/300 °F) 2 max. (150 °C/300 °F) -

- > 1000, 20,000 rpm 1000 min. 1000 min. 1000- at 100 °C (212 °F) at 150 °C ( 302 °F) at 150 °C (302 °F) at 110 °C (230 °F)

1,4 max - - - -2800 min. 2400 min - - 1100 min.

- 200 g tube - - -420 ml cartridge - 420 ml cartridge 420 ml cartridge 420 ml cartridge1, 5, 18, 50, 180 kg 1, 180 kg 1, 5, 18, 50, 180 kg 1, 5, 18, 50, 180 kg 1, 18, 180 kg- - - - SYSTEM 24

LGEP 2/(pack size) LGLT 2/(pack size) LGHP 2/(pack size) LGHQ 3/(pack size) LGFP 2/(pack size)

LGEP 2 LGLT 2 LGHP 2 LGHQ 3 LGFP 2

106


DIN 51825 code KPE 2K-40 K2K-40 K2N-30

NLGI consistency class 2 2 2

Soap type Lithium / calcium Calcium complex Lithium complex

Colour Off white Light beige Amber

Base oil type Synthetic ester Ester / mineral Mineral

Operating temperature range, ºC (ºF) -40 to 120 -40 to 120 -30 to 140 (-40 to 250) (-40 to 250) (-22 to 284)

Dropping point DIN ISO 2176, ºC (ºF) >170 (>338) >195 (>383) > 250 (482)

Base oil viscosity:40 ºC, mm2/s 110 24 185100 ºC, mm2/s 13 4,7 15

Penetration DIN ISO 2137:60 strokes, 10-1 mm 265 - 295 265 - 295 265 - 295100.000 strokes, 10-1 mm <30 360 max. +50 max. (325 max.)

Mechanical stability:Roll stability, 50 hrs at 80 ºC, 10-11 mm +50 max. change - +50 max. changeRoll stability, 72 hrs at 100 ºC, 10-1 mm - - -SKF V2F test - - 'M'

Corrosion protection:SKF Emcor - standard ISO 11007 0 - 0 0 - 1 0 - 0

- water washout test - - 0 - 0- salt water test - - -

Water resistanceDIN 51 807/1, 3 hrs at 90 ºC 1 max. 1 max. 1 max.

Oil separationDIN 51 817, 7 days at 40 ºC, static, % 1 - 2 1 - 4 1 - 5

Lubrication abilitySKF R2F, running test B Pass at 100 °C - Pass at 100 °C

(212 °F) (212 °F)

Copper corrosionDIN 51 811, 100 ºC - 2 max. (110 °C/230 °F) 2 max.

Rolling bearing grease lifeSKF R0F test L50 life at 10.000 rpm, hrs > 500 > 1000, 20,000 rpm -

at 120 ºC (250 ºF) at 110 ºC (230 ºF) -

EP performanceWear scar DIN 51350/5, 1.400 N, mm 1.68 - 1,6 max.4-ball test, welding load DIN 51350/4 2500 N 3400 min. 2600 min.

Available pack sizes- 200 g tube 35, 200 g tube420 ml cartridge - 420 ml cartridge5, 18, 180 kg 1, 180 kg 1, 5, 50, 180 kgSYSTEM 24 - SYSTEM 24

DesignationLGGB 2/(pack size) LGLC 2/(pack size) LGWA 2/(pack size)

LGLC 2LGGB 2 LGWA 2

Special bearing greases (page 57-59)

107


KP2N-20 KFK2U-40 KPF2K-20 KPF2K-10 KP1G-30

2 2 2 2 1

Complex calcium PTFE Lithium Lithium-calcium Lithiumsulphonate

Brown Whitish cream Black Black Brown

Mineral Synthetic Mineral Mineral Mineral(fluorinated polyether)

-20 to 150 -40 to 260 -20 to 120 -10 to 120 -30 to 110 (-4 to 300) (-40 to 500) (-4 to 250) (14 to 250) (-22 to 230)

>220 (>428) > 300 (572) >180 (356) >180 (356) >170 (338)

400-450 400 500 1020 20026,5 38 32 58 16

265 - 295 265 - 295 265 - 295 265 - 295 310 - 340-20 - +50 (325 max.) - 325 max. 325 max. +50 max.

- ± 30 max. (130 °C/266 °F) 345 max. 325 max. --20 - +50 change - - 325 max. -'M' - 'M' 'M' -

0 - 0 0 - 1 0 - 0 0 - 0 0 - 00 - 0 - 0 - 0 - 0 - 00 - 0 - - - -

1 max. 1 max. 1 max. 1 max. 1 max.

1 - 3 2 - 3 1 - 5 1 - 5 8 - 13

Pass at 140 °C - Pass at 100 °C - -(284 °F) (212 °F)

2 max. (150 °C/300 °F) 1 (150 °C/300 °F) 2 max. 1 max. 2 max. (90 °C/194 °F)

> 1000 >700, 5600 rpm - - -at 130 ºC (266 ºF) at 220 °C (428 °F) - - -

- - 1,4 max. - 1,8 max.3000 min. 4000 min. 3000 min. 3000 min. 3200 min.

- 50 g (25 ml) syringe - 35 g tube -420 ml cartridge - 420 ml cartridge 420 ml cartridge 420 ml cartridge5, 18, 50, 180 kg - 5, 18, 180 kg 5, 18, 50, 180 kg 5, 50, 180 kgSYSTEM 24 - SYSTEM 24 -

LGHB 2/(pack size) LGET 2/0.05 LGEM 2/(pack size) LGEV 2/(pack size) LGWM 1/(pack size)

LGHB 2 LGET 2 LGEM 2 LGEV 2 LGWM 1

Description Rust inhibitor Anti-corrosive Anti-fretting Medium High Food compatible, mixing ratio with agent paste temperature oil temperature oil USDA H1oil 1:20 approved oil

Specific gravity 0,93 - 0,95 0,815 1,19 0,875 0,951 0,857

Colour Brown thixotropic Hazy brown White-beige Yellow-brown Green-brown Pale yellowliquid

Base oil type Light Mineral Mineral and Mineral Synthetic Medical white oil mineral oil synthetic

Thickener Not applicable Not applicable Lithium soap Not applicable Not applicable Not applicable

Operating temperature range, - - -25 to 250 °C -10 to 90 °C -20 to 250 °C -20 to 150 °CºC (ºF) - - (-13 to 482 °F) (14 to 194 °F) (-4 to 482 °F) (-4 to 302 °F)

Base oil viscosity:20 ºC, mm2/s not valid because not valid because - - - -40 ºC, mm2/s of thixotropic of thixotropic 17,5 68 265 120100 ºC, mm2/s nature nature - - - -

Flash point 146 °C (295 °F) 39 °C (102 °F) - 222 °C (432 °F) 230 °C (446 °F) 212 °C (414 °F)

Pour point 5 °C (40 °F) -20 °C (-4 °F) - -27 °C (-17 °F) -46 °C (-51 °F) -27 °C (-17 °F)

Available pack sizes 5 l can 5 l can - 125 ml automatic 125 ml automatic 125 ml automatic- 180 l drum 0,5 kg can lubricator lubricator lubricator- - - SYSTEM 24 SYSTEM 24 SYSTEM 24

Designation LHVI 1/5 LHRP 1/ LAGF 3E/0.5 LAGD 125/ LAGD 125/ LAGD 125/(pack size) HMT68 HHT265 HFP120

108


Designation TMBA G11D

Pack size 50 pairsSize 9Colour white

Designation TMBA G11R

Pack size 1 pairSize 10Colour blue

TMBA G11D and TMBA G11R (page 59)

LHVI 1 LHRP 1 LGAF 3E LHMT 68 LHHT 265 LHFP 120

Nominal emptying time Adjustable; 1 - 12 monthsAmbient temperature range -20 to 55 ºC (-5 to 131 ºF)Maximum operating pressure 5 bar (73 psi)Drive mechanism Gas cell producing hydrogen gas (H2) Connection thread G 1/4

Recommended storage temperature 20 ºC (70 ºF)Storage life of lubricator 2 yearsGas cell life 3 yearsWeight approx 190g (6.7 oz)

lubricant included

Grease capacityLAGD 125 125 ml (4.25 fl oz. US)LAGD 60 60 ml (2.03 fl oz. US)

LAGD 125 and LAGD 60 (page 63)

Content 8-outlet lubricator20 m tubingQuick connectors for application side2 Y-connectorsLGMT 2/0.4 grease cartridgeSKF's DialSet program

Number of feed lines 1 - 8Maximum pressure 40 bar (600 psi)Suitable grease NLGI 1, 2 and 3Maximum length of feed-lines 5 m (16 ft)Ambient temperature 0 - 50 °C (32 - 120 °F)Drive mechanism Electro-mechanical

Volume 0,3 - 10 cm3/day (0.01 - 0.35 US fl. oz/day)per outlet

Power 110-240V AC, 50-60Hz or 24V DCAlarms Blocked feed lines, empty cartridge;

internal and externalExternal steering External relay steering IP rating 54Lubrication tubes 20 m (65 ft), Nylon, 6 x 1,5 mm (1/4 x 0.06 in)Connection thread G 1/4Height 510 mm (20 in)

Designation LAGD 400

LAGD 400 (page 66)

Chemicals and oils (pages 60 and 63)

109


Boundary dimensions- LAHD 500 Ø 91 mm x 290 mm high (3.6 x 11.4 in)- LAHD 1000 Ø 122 mm x 290 mm high (4.8 x 11.4 in)Reservoir volume- LAHD 500 500 ml (17 fl. oz. US)- LAHD 1000 1.000 ml (34 fl. oz. US)Container material PolycarbonateAllowed temperature range - 20 to 125 C (-4 to 255 F)Permissible humidity 0 - 100 %

Length of connecting tube 600 mm (23.5 in)Connection thread G 1/2Tube material PolyurethaneO-ring material NBR - 70 ShoreGaskets NBR - 80 Shore 6 piecesOther material Aluminum, Bronze, Stainless SteelSuitable oil types Mineral and synthetic oils

Designation LAHD 500 / LAHD 1000

LAHD series (page 67)

Maximum volume per stroke 20 cm3 (1.2 in3)Material steel and polyethylene

Length 360 mm (14 in)Weight 0,35 kg (0.77 lb)

Designation LAGP 400

LAGP 400 (page 67)

Maximum pressure 40 MPa (5,800 psi)Volume/stroke 1,5 cm3 (0.09 in3)

Length 380 mm (14.9 in)Weight 1,5 kg (3.3 lb)

Designation 1077600

1077600 (page 68)

Maximum pressure 30 MPa (4,350 psi)Volume/stroke approx. 0,8 cm3 (0.049 in3)

Length 370 mm (14.6 in)Weight 1,5 kg (3.3 lb)

Designation LAGH 400

LAGH 400 (page 68)

Maximum pressure 3 MPa (430 psi) 3 MPa (430 psi)Volume/stroke approx. 45 cm3 (1.5 fl oz.) approx. 45 cm3 (1.5 fl oz.)Suitable drum dimensions:- inside diameter 265-285 mm (10.4 - 11.2 in) 350-385 mm (13.8 - 15.2 in)- maximum inside height 420 mm (16.5 in) 675 mm (26.6 in)Weight 5 kg (11 lb) 7 kg (15 lb)

Designation LAGF 18 LAGF 50

LAGF series (page 69)

Description Grease pump Mobile grease pump Grease pump Grease pump Trolley for drums for 18 kg drums for 18 kg drums for 50 kg drums for 180 kg drums up to 200 kg

Pumping Manual Air-pressure Air-pressure Air-pressure n.a.Max. pressure 50 MPa (7,250 psi) 42 MPa (6,090 psi) 42 MPa (6,090 psi) 42 MPa (6,090 psi) n.a.SKF Drum 18 kg (39.6 lb) 18 kg (39.6 lb) 50 kg (110 lb) 180 kg (396 lb) 180 kg (396 lb)Inner diameter 265 - 285 mm 265 - 285 mm 350 - 385 mm 550 - 590 mm n.a.

(10.43 - 11.22 in) (10.43 - 11.22 in) (13.78 - 15.16 in) (21.65 - 23.23 in)Note Stationary Mobile Stationary Stationary Mobile

Designation LAGG 18M LAGG 18A LAGG 50A LAGG 180A LAGT 180

LAGG series (page 69)

110


Max working pressure 40 MPa (5,800 psi)Min burst pressure 80 MPa (11,600 psi)

Standard DIN 71412Material Hardened

Designation LAGN 120

LAGN 120 (page 70)

Thread formHMV 10E - HMV 40E ISO 965/111-1980 tolerance class 6HHMV 41E - HMV 200E ISO 2901-1977 tolerance class 7H Mounting fluid LHMF 300

Recommended PumpsHMV 10E - HMV 54E 729124 / TMJL 100 / 728619 / TMJL 50 HMV 56E - HMV 92E TMJL 100 / 728619/ TMJL 50HMV 94E - HMV 200E 728619 / TMJL 50Quick connection nipple 729832 A (included)

Designation HMV E

HMV E series (page 73)

Suitable grease consistency NLGI 0 - NLGI 2Maximum pressure 70 MPa (10,000 psi)Thread connection M10 x 1Max. flow 1.000 cm3/min (34 fl oz./min)Weight 1 kg (2.2 lb)

Battery type 2 x LR1 (1.5V)Battery life 2 yearsAccuracy ± 5% ± 1 digitLow power indication Weak reading in display

Designation LAGM 1000

LAGM 1000 (page 70)

Designation Permitted Piston Weightpiston dis- areaplacement

G d1 d2 d3 B B1

thread mm mm mm mm mm mm mm2 kg

HMV 10E M 50x1,5 50,5 104 114 38 4 5 2.900 2,70HMV 11E M 55x2 55,5 109 120 38 4 5 3.150 2,75HMV 12E M 60x2 60,5 115 125 38 5 5 3.300 2,80HMV 13E M 65x2 65,5 121 130 38 5 5 3.600 3,00HMV 14E M 70x2 70,5 127 135 38 5 5 3.800 3,20

HMV 15E M 75x2 75,5 132 140 38 5 5 4.000 3,40HMV 16E M 80x2 80,5 137 146 38 5 5 4.200 3,70HMV 17E M 85x2 85,5 142 150 38 5 5 4.400 3,75HMV 18E M 90x2 90,5 147 156 38 5 5 4.700 4,00HMV 19E M 95x2 95,5 153 162 38 5 5 4.900 4,30




HMV 36E M 180x3 180,5 247 256 41 7 6 10.300 9,15HMV 38E M 190x3 191 259 270 42 8 7 11.500 10,5HMV 40E M 200x3 201 271 282 43 8 8 12.500 11,5

Special executions also available on request

Other types availableInch series nuts HMVC E seriesNuts without threads HMV...E/A101

O-rings Nut designation followed by /233983e.g. HMV 10/233983

Ball plug 233950Quick connection nipple 729832 A

Replacement parts


111


Designation Permitted Piston Weightpiston dis- areaplacement

G d1 d2 d3 B B1

thread mm mm mm mm mm mm mm2 kg

HMV 41E Tr 205x4 207 276 288 43 8 8 12.800 12,0HMV 42E Tr 210x4 212 282 294 44 8 9 13.400 12,5HMV 43E Tr 215x4 217 287 300 44 8 9 13.700 13,0HMV 44E Tr 220x4 222 293 306 44 8 9 14.400 13,5HMV 45E Tr 225x4 227 300 312 45 8 9 15.200 14,5








HMV 110E Tr 550x6 552 667 693 70 13 21 59.200 84,0HMV 112E Tr 560x6 562 678 704 71 13 22 61.200 88,0HMV 114E Tr 570x6 572 689 716 72 13 23 63.200 91,0HMV 116E Tr 580x6 582 699 726 72 13 23 64.200 94,0HMV 120E Tr 600x6 602 721 748 73 13 23 67.300 100

HMV 126E Tr 630x6 632 754 782 74 14 23 72.900 110HMV 130E Tr 650x6 652 775 804 75 14 23 76.200 115HMV 134E Tr 670x6 672 796 826 76 14 24 79.500 120HMV 138E Tr 690x6 692 819 848 77 14 25 84.200 127HMV 142E Tr 710x7 712 840 870 78 15 25 87.700 135

HMV 150E Tr 750x7 752 883 912 79 15 25 95.200 146HMV 160E Tr 800x7 802 936 965 80 16 25 103.900 161HMV 170E Tr 850x7 852 990 1020 83 16 26 114.600 181HMV 180E Tr 900x7 902 1.043 1.075 86 17 30 124.100 205HMV 190E Tr 950x8 952 1.097 1.126 86 17 30 135.700 218

HMV 200E Tr 1000x8 1.002 1.150 1.180 88 17 34 145.800 239


112


Thread form HMVC 10E - HMVC 64E American National

Form Threads Class 3HMVC 68E - HMVC 190E ACME General Purpose

Threads Class 3 GMounting fluid LHMF 300

Recommended PumpsHMVC 10E - HMVC 52E 729124 / TMJL 100 / 728619 / TMJL 50HMVC 56E - HMVC 92E TMJL 100 / 728619 / TMJL 50HMVC 94E - HMVC 190E 728619 / TMJL 50Quick connection nipple 729832 A (included)

Designation HMVC E

HMVC E series (page 73)

Designation Pitch Threads Permitted Piston Weightdiameter per in piston dis- area

placement

G d1 d2 d3 B B1

in in - in in in in in in in2 lb

HMVC 10E 1.967 1.9309 18 2.0 4.1 4.5 1.5 0.16 0.20 4.5 6.0HMVC 11E 2.157 2.1209 18 2.2 4.3 4.7 1.5 0.16 0.20 4.9 6.1HMVC 12E 2.360 2.3239 18 2.4 4.5 4.9 1.5 0.20 0.20 5.1 6.2HMVC 13E 2.548 2.5119 18 2.6 4.8 5.1 1.5 0.20 0.20 5.6 6.6HMVC 14E 2.751 2.7149 18 2.8 5.0 5.3 1.5 0.20 0.20 5.9 7.1






HMVC 76E 14.957 14.8370 5 15.0 18.7 19.6 2.3 0.43 0.63 51.9 89.3HMVC 80E 15.745 15.6250 5 15.8 19.6 20.6 2.4 0.43 0.67 56.9 100HMVC 84E 16.532 16.4120 5 16.6 20.6 21.5 2.4 0.43 0.67 62.0 110HMVC 88E 17.319 17.1990 5 17.4 21.4 22.3 2.4 0.47 0.67 65.9 119HMVC 92E 18.107 17.9870 5 18.2 22.2 23.3 2.5 0.47 0.67 69.9 132

HMVC 96E 18.894 18.7740 5 19.0 23.1 24.1 2.6 0.47 0.75 75.3 139HMVC 100E 19.682 19.5620 5 19.8 24.0 25.0 2.6 0.47 0.75 79.8 154HMVC 106E 20.867 20.7220 4 20.9 25.4 26.4 2.7 0.51 0.83 87.1 174HMVC 112E 22.048 21.9030 4 22.1 26.7 27.7 2.8 0.51 0.87 94.9 194HMVC 120E 23.623 23.4780 4 23.7 28.4 29.4 2.9 0.51 0.91 104.3 220

HMVC 126E 24.804 24.6590 4 24.9 29.7 30.8 2.9 0.55 0.91 113.0 243HMVC 134E 26.379 26.2340 4 26.5 31.3 32.5 3.0 0.55 0.94 123.2 265HMVC 142E 27.961 27.7740 3 28.0 33.1 34.3 3.1 0.59 0.98 135.9 298HMVC 150E 29.536 29.3490 3 29.6 34.8 35.9 3.1 0.59 0.98 147.6 322HMVC 160E 31.504 31.3170 3 31.6 36.9 38.0 3.1 0.63 0.98 161.0 355

HMVC 170E 33.473 33.2860 3 33.5 39.0 40.2 3.3 0.63 1.02 177.6 399HMVC 180E 35.441 35.2540 3 35.5 41.1 42.3 3.4 0.67 1.18 192.4 452HMVC 190E 37.410 37.2230 3 37.5 43.2 44.3 3.4 0.67 1.18 210.3 481


113


Mounting fluid LHMF 300Recommended PumpsHMV 10E/A101 - HMV 52E/A101 729124 / TMJL 100 / 728619 / TMJL 50

HMV 54E/A101 - HMV 92E/A101 TMJL 100 / 728619 / TMJL 50HMV 94E/A101 - HMV 200E/A101 728619 / TMJL 50Quick connection nipple 729832 A (included)

Designation HMV E/A101

HMV E/A101 series (page 73)

Designation Bore diameterG

mm in

HMV 10E/A101 46,7 1.84 HMV 11E/A101 51,1 2.01 HMV 12E/A101 56,1 2.21HMV 13E/A101 61,1 2.41HMV 14E/A101 66,1 2.60HMV 15E/A101 71,1 2.80HMV 16E/A101 76,1 3.00HMV 17E/A101 81,1 3.19HMV 18E/A101 86,1 3.39HMV 19E/A101 91,1 3.59HMV 20E/A101 96,1 3.78HMV 21E/A101 101,1 3.98HMV 22E/A101 106,1 4.18HMV 23E/A101 111,1 4.37HMV 24E/A101 116,1 4.57HMV 25E/A101 121,1 4.77HMV 26E/A101 126,1 4.96HMV 27E/A101 131,1 5.16HMV 28E/A101 136,1 5.36HMV 29E/A101 141,1 5.56HMV 30E/A101 146,1 5.75HMV 31E/A101 149,8 5.90HMV 32E/A101 154,8 6.09HMV 33E/A101 159,8 6.29HMV 34E/A101 164,8 6.49HMV 36E/A101 174,8 6.88HMV 38E/A101 184,8 7.28HMV 40E/A101 194,8 7.67


mm in

HMV 41E/A101 200,2 7.88HMV 42E/A101 205,2 8.08HMV 43E/A101 210,2 8.28HMV 44E/A101 215,2 8.47HMV 45E/A101 220,2 8.67HMV 46E/A101 225,2 8.87HMV 47E/A101 230,2 9.06HMV 48E/A101 235,2 9.26HMV 50E/A101 245,2 9.65HMV 52E/A101 255,2 10.05HMV 54E/A101 265,2 10.44HMV 56E/A101 275,2 10.83HMV 58E/A101 285,2 11.23HMV 60E/A101 295,2 11.62HMV 62E/A101 304,7 12.00HMV 64E/A101 314,7 12.39HMV 66E/A101 324,7 12.78HMV 68E/A101 334,7 13.18HMV 69E/A101 339,7 13.37HMV 70E/A101 344,7 13.57HMV 72E/A101 354,7 13.96HMV 73E/A101 359,7 14.16HMV 74E/A101 364,7 14.36HMV 76E/A101 374,7 14.75HMV 77E/A101 379,7 14.95HMV 80E/A101 394,7 15.54HMV 82E/A101 404,7 15.93HMV 84E/A101 414,7 16.33


mm in

HMV 86E/A101 424,7 16.72HMV 88E/A101 434,7 17.11HMV 90E/A101 444,7 17.51HMV 92E/A101 454,7 17.90HMV 94E/A101 464,7 18.30HMV 96E/A101 474,7 18.69HMV 98E/A101 484,7 19.08HMV 100E/A101 494,7 19.48HMV 102E/A101 503,7 19.83HMV 104E/A101 513,7 20.22HMV 106E/A101 523,7 20.62HMV 108E/A101 533,7 21.01HMV 110E/A101 543,7 21.41HMV 112E/A101 553,7 21.80HMV 114E/A101 563,7 22.19HMV 116E/A101 573,7 22.59HMV 120E/A101 593,7 23.37HMV 126E/A101 623,7 24.56HMV 130E/A101 643,7 25.34HMV 134E/A101 663,7 26.13HMV 138E/A101 683,7 26.92HMV 142E/A101 702,7 27.67HMV 150E/A101 742,7 29.24HMV 160E/A101 792,7 31.21HMV 170E/A101 842,7 33.18HMV 180E/A101 892,7 35.15HMV 190E/A101 941,7 37.07HMV 200E/A101 991,7 39.04


NOTE: All above pumps are complete with digital pressure gauge, high pressure hose and quick connect coupling.

Designation 729124 SRB TMJL 100SRB TMJL 50SRB

Max. pressure 100 MPa / 14,500 psi 100 MPa / 14,500 psi 50 MPa / 7,250 psiVolume/stroke 0,5 cm3 / 0.03 in3 1,0 cm3 / 0.06 in3 3,5 cm3 / 0.21 in3

Oil container capacity 250 cm3 / 15 in3 800 cm3 / 48 in3 2.700 cm3 / 165 in3

Digital pressure gauge unit MPa MPa MPaVariants:Pump fitted with digital pressure gauge in psi 729124 DA TMJL 100DA TMJL 50DA

729124 SRB,TMJL 100SRB and TMJL 50SRB (page 75)

21315 CCK 2,2 3,8 0,034 0,5221315 EK 2,2 3,8 0,034 0,5221316 CCK 2,5 4,2 0,036 0,5521316 EK 2,2 3,8 0,036 0,5421317 CCK 2,5 4,3 0,038 0,5821317 EK 1,8 3,0 0,038 0,5421318 CCK 2,7 4,6 0,041 0,6121318 EK 1,9 3,2 0,041 0,5721319 CCK 2,9 5,0 0,043 0,6421319 EK 1,9 3,3 0,043 0,5921320 CCK 3,3 5,6 0,045 0,68

213… series21310 CCK 1,6 2,7 0,023 0,3821310 EK 1,9 3,2 0,023 0,4021311 CCK 1,6 2,8 0,025 0,4021311 EK 1,4 2,3 0,025 0,4021312 CCK 2,1 3,6 0,027 0,4421312 EK 2,4 4,1 0,027 0,4621313 CCK 2,2 3,7 0,029 0,4721313 EK 2,5 4,3 0,029 0,4921314 CCK 2,1 3,6 0,032 0,4921314 EK 2,7 4,5 0,032 0,52

Bearing Starting Final positiondesignation position

Hydraulic Radial Axial drive-uppressure* clearance from starting

MPa reduction from positionzero position

1 2 mm ss mm




1 2 mm ss mm

Pressure and axial drive-up tables (valid for mounting on solid steel shafts, see bottom of table)

114





1 2 mm ss mm

21320 EK 1,5 2,5 0,045 0,5921322 CCK 3,6 6,2 0,050 0,75222… series 22210 CCK 0,7 1,2 0,023 0,3522210 EK 0,8 1,3 0,023 0,3522211 CCK 0,8 1,3 0,025 0,3722211 EK 0,7 1,2 0,025 0,3722212CCK 1,0 1,6 0,027 0,4022212 EK 0,9 1,5 0,027 0,4022213 CCK 1,1 1,9 0,029 0,4322213 EK 1,0 1,6 0,029 0,4222214 CCK 1,1 1,8 0,032 0,4522214 EK 0,9 1,6 0,032 0,4422215 CCK 1,0 1,7 0,034 0,4722215 EK 0,9 1,5 0,034 0,4722216 CCK 1,0 1,8 0,036 0,4922216 EK 1,0 1,7 0,036 0,4922217 CCK/W33 1,1 1,9 0,038 0,5222217 EK 1,2 2,0 0,038 0,5222218 CCK/W33 1,3 2,2 0,041 0,5522218 EK 1,2 2,0 0,041 0,5422219 CCK/W33 1,4 2,4 0,043 0,5722219 EK 1,4 2,3 0,043 0,5722220 CCK/W33 1,6 2,7 0,045 0,6022220 EK 1,5 2,5 0,045 0,5922222 CCK/W33 1,9 3,2 0,050 0,6622222 EK 1,7 2,9 0,050 0,6522224 CCK/W33 1,9 3,3 0,054 0,7022224 EK 1,8 3,1 0,054 0,7022226 CCK/W33 2,1 3,6 0,059 0,7522226 EK 2,0 3,3 0,059 0,7422228 CCK/W33 2,3 4,0 0,063 0,8022230 CCK/W33 2,5 4,3 0,068 0,8522232 CCK/W33 2,6 4,4 0,072 0,9122234 CCK/W33 2,8 4,7 0,077 0,9722236 CCK/W33 2,5 4,3 0,081 1,0122238 CCK/W33 2,6 4,4 0,086 1,0622240 CCK/W33 2,7 4,6 0,090 1,1222244 CCK/W33 2,9 5,0 0,099 1,2222248 CCK/W33 3,3 5,6 0,108 1,3422252 CCK/W33 3,2 5,5 0,117 1,4322256 CCK/W33 2,9 5,0 0,126 1,5222260 CCK/W33 2,9 4,9 0,135 1,6222264 CCK/W33 3,0 5,2 0,144 1,73223… series 22310 CCK 1,8 3,0 0,023 0,3622310 EK 1,6 2,8 0,023 0,3522311 CCK 1,9 3,2 0,025 0,3922311 EK 2,0 3,4 0,025 0,3922312 CCK 2,0 3,4 0,027 0,4122312 EK 2,4 4,1 0,027 0,4222313 CCK 2,1 3,7 0,029 0,4422313 EK 2,1 3,6 0,029 0,4422314 CCK/W33 2,3 3,9 0,032 0,4722314 EK 2,6 4,4 0,032 0,4822315 CCK/W33 2,5 4,3 0,034 0,4922315 EK 2,3 4,0 0,034 0,4922316 CCK/W33 2,6 4,4 0,036 0,5222316 EK 2,4 4,1 0,036 0,5222317 CCK/W33 2,8 4,8 0,038 0,5522317 EK 3,0 5,0 0,038 0,5522318 CCK/W33 2,9 4,9 0,041 0,5722318 EK 3,0 5,1 0,041 0,5822319 CCK/W33 3,0 5,2 0,043 0,6022319 EK 3,0 5,2 0,043 0,6022320 CCK/W33 3,5 5,9 0,045 0,6422320 EK 4,1 7,0 0,045 0,6522322 CCK/W33 4,1 6,9 0,050 0,6922322 EK 4,5 7,7 0,050 0,7122324 CCK/W33 4,4 7,5 0,054 0,7522326 CCK/W33 4,7 8,1 0,059 0,8022328 CCK/W33 5,0 8,6 0,063 0,85

22330 CCK/W33 5,3 9,0 0,068 0,9022332 CCK/W33 5,2 8,8 0,072 0,6922334 CCK/W33 5,2 8,9 0,077 1,0222336 CCK/W33 5,1 8,8 0,081 1,0722338 CCK/W33 5,1 8,7 0,086 1,1222340 CCK/W33 5,1 8,8 0,090 1,1722344 CCK/W33 5,6 9,5 0,099 1,3022348 CCK/W33 5,6 9,5 0,108 1,4022352 CCK/W33 5,6 9,6 0,117 1,5122356 CCK/W33 5,7 9,7 0,126 1,62230… series 23022 CCK/W33 1,1 1,8 0,050 0,6323024 CCK/W33 1,0 1,8 0,054 0,6723040 CCK/W33 1,6 2,8 0,090 1,0723044 CCK/W33 1,7 2,8 0,099 1,1623048 CCK/W33 1,5 2,5 0,108 1,2623052 CCK/W33 1,7 2,9 0,117 1,3623056 CCK/W33 1,5 2,6 0,126 1,4523060 CCK/W33 1,8 3,0 0,135 1,5523064 CCK/W33 1,6 2,7 0,144 1,6423068 CCK/W33 1,8 3,1 0,153 1,7523072 CCK/W33 1,6 2,8 0,162 1,8323076 CCK/W33 1,6 2,7 0,171 1,92231… series 23120 CCK/W33 1,4 2,4 0,045 0,5923122 CCK/W33 1,4 2,5 0,050 0,6323124 CCK/W33 1,8 3,0 0,054 0,6823126 CCK/W33 1,6 2,8 0,059 0,7323128 CCK/W33 1,7 2,9 0,063 0,7823130 CCK/W33 2,2 3,8 0,068 0,8323132 CCK/W33 2,3 3,8 0,072 0,8923134 CCK/W33 2,1 3,6 0,077 0,9323136 CCK/W33 2,3 3,9 0,081 0,9823138 CCK/W33 2,5 4,3 0,086 1,0423140 CCK/W33 2,6 4,4 0,090 1,0923144 CCK/W33 2,7 4,6 0,099 1,1923148 CCK/W33 2,6 4,5 0,108 1,2823152 CCK/W33 2,9 4,9 0,117 1,3923156 CCK/W33 2,6 4,4 0,126 1,4823160 CCK/W33 2,8 4,8 0,135 1,5823164 CCK/W33 3,1 5,3 0,144 1,6923168 CCK/W33 3,4 5,8 0,153 1,8023172 CACK/W33 3,3 5,6 0,162 1,9023176 CAK/W33 2,9 4,9 0,171 1,97232… series23218 CCK/W33 1,7 2,9 0,041 0,5423220 CCK/W33 1,9 3,3 0,045 0,5923222 CCK/W33 2,4 4,0 0,050 0,6523224 CCK/W33 2,5 4,3 0,054 0,7023226 CCK/W33 2,6 4,4 0,059 0,7523228 CCK/W33 3,0 5,2 0,063 0,8023230 CCK/W33 3,1 5,3 0,068 0,8523232 CCK/W33 3,3 5,6 0,072 0,9123234 CCK/W33 3,4 5,9 0,077 0,9623236 CCK/W33 3,2 5,4 0,081 1,0023238 CCK/W33 3,3 5,5 0,086 1,0623240 CCK/W33 3,5 5,9 0,090 1,1223244 CCK/W33 3,8 6,5 0,099 1,2223248 CCK/W33 4,3 7,4 0,108 1,3323252 CACK/W33 4,6 7,8 0,117 1,4523256 CACK/W33 4,1 7,0 0,126 1,5323260 CACK/W33 4,3 7,4 0,135 1,6423264 CACK/W33 4,7 8,0 0,144 1,7523268 CAK/W33 5,0 8,5 0,153 1,8623272 CAK/W33 4,7 8,0 0,162 1,9523276 CAK/W33 4,7 8,1 0,171 2,05239… series23936 CCK/W33 0,8 1,4 0,081 0,9523938 CCK/W33 0,7 1,2 0,086 0,9923940 CCK/W33 0,9 1,5 0,090 1,0423944 CCK/W33 0,8 1,3 0,099 1,1223948 CCK/W33 0,6 1,1 0,108 1,21




1 2 mm ss mm

Pressure and axial drive-up tables

115





1 2 mm ss mm

* = Values given valid for HMV E-nut size = Bearing size1 = Should be applied when one surface slides during mounting. Surface lightly oiled.2 = Should be applied when two surfaces slide during mounting, Surface lightly oiled.

Designation Nominal Pressure Maximum Volume/ Oil outlet Length Height Width Weighthydraulic ratio air strokepressure pressure

THAP 030 30 MPa 1 : 59 0,7 MPa 6,63 cm3 G 3/4 380 mm 190 mm 120 mm 10 kg4,350 psi 101.5 psi 0.40 in3 15 in 7.5 in 4.7 in 22 lb

THAP 030/SET Complete set consisting of pump, high pressure hose and connecting nipples. 21 kg46 lb

THAP 030K Cabinet version, includes air regulator, air pressure gauge, hydraulic pressure gauge, 27 kgoil container, double outlet and pressure hoses with quick connectors. 59 lb

THAP 150 150 MPa 1 : 252 0,7 MPa 1,09 cm3 G 3/4 330 mm 190 mm 120 mm 8 kg21,750 psi 101.5 psi 0.06 in3 13.0 in 7.5 in 4.7 in 17.6 lb

THAP 150/SET Complete set consisting of pump, pressure gauge, adapter block, 22,5 kghigh pressure hose and connecting nipples. 50 lb

THAP 150K Cabinet version, includes air regulator, air pressure gauge, hydraulic pressure gauge, 25 kgoil container, double outlet and pressure hoses with quick connectors. 55 lb

THAP 300 300 MPa 1 : 450 0,7 MPa 0,42 cm3 G 3/4 405 mm 190 mm 120 mm 11 kg43,500 psi 101.5 psi 0.03 in3 16 in 7.5 in 4.7 in 24.2 lb

THAP 300/SET Complete set consisting of pump, pressure gauge, adapter block, high pressure pipe. 24,5 kg54 lb

THAP 300K Cabinet version, includes air regulator, air pressure gauge, hydraulic pressure gauge, 28 kgoil container, single outlet and high pressure pipe with swivel nipple. 62 lb

THAP series (page 77)

23952 CCK/W33 0,9 1,6 0,117 1,3223956 CCK/W33 0,8 1,4 0,126 1,4123960 CCK/W33 1,1 1,8 0,135 1,5223964 CCK/W33 1,0 1,6 0,144 1,6123968 CCK/W33 0,9 1,5 0,153 1,6923972 CCK/W33 0,8 1,4 0,162 1,7823976 CCK/W33 1,0 1,8 0,171 1,89240… series24024 CCK30/W33 1,1 2,0 0,054 1,6724026 CCK30/W33 1,4 2,6 0,059 1,8124028 CCK30/W33 1,3 2,4 0,063 1,9124030 CCK30/W33 1,3 2,5 0,068 2,0324032 CCK30/W33 1,3 2,5 0,072 2,1524034 CCK30/W33 1,5 2,8 0,077 2,2924036 CCK30/W33 1,8 3,3 0,081 2,4324038 CCK30/W33 1,6 2,9 0,086 2,5324040 CCK30/W33 1,7 3,2 0,090 2,6724044 CCK30/W33 1,7 3,2 0,099 2,9124048 CCK30/W33 1,5 2,8 0,108 3,1224052 CCK30/W33 1,9 3,5 0,117 3,4024056CCK30/W33 1,6 3,1 0,126 3,6124060 CCK30/W33 1,9 3,5 0,135 3,8724064 CCK30/W33 1,8 3,3 0,144 4,11

24068 CCK30/W33 2,0 3,8 0,153 4,3724072 CCK30/W33 1,9 3,4 0,162 4,5924076 CCK30/W33 1,8 3,3 0,171 4,81241… series24122 CCK30/W33 1,6 2,9 0,050 1,5924124 CCK30/W33 1,9 3,6 0,054 1,7224126 CCK30/W33 1,9 3,5 0,059 1,8424128 CCK30/W33 1,9 3,5 0,063 1,9524130 CCK30/W33 2,4 4,4 0,068 2,1024132 CCK30/W33 2,5 4,7 0,072 2,2424134 CCK30/W33 2,2 4,0 0,077 2,3324136 CCK30/W33 2,5 4,6 0,081 2,4824138 CCK30/W33 2,7 4,9 0,086 2,6224140 CCK30/W33 2,8 5,2 0,090 2,7524144 CCK30/W33 2,8 5,2 0,099 2,9924148 CCK30/W33 2,8 5,3 0,108 3,2424152 CCK30/W33 3,1 5,7 0,117 3,5024156 CCK30/W33 2,8 5,1 0,126 3,7224160 CCK30/W33 3,1 5,7 0,135 4,0024164 CCK30/W33 3,4 6,3 0,144 4,2724168 CCK30/W33 3,6 6,7 0,153 4,5124172 CCK30/W33 3,4 6,3 0,162 4,7424176 CCK30/W33 3,2 6,0 0,171 4,98




1 2 mm ss mm

Pressure and axial drive-up tables

This table is valid for mounting on solid steel shafts, with an interference fit corresponding to a clearance reduction of 0,00045 x d.For other configurations refer to SKF Drive-up Method CD-ROM.

Valve nipple (optional) 226272 226273Suitable shaft diameters 100 mm (4 in) 200 mm (8 in)Maximum pressure 300 MPa (43,500 psi) 300 MPa (43,500 psi)Oil container capacity 5,5 cm3 (0.33 in3) 25 cm3 (1.5 in3)Connecting threads G 3/8 G 3/4Load to reach max. pressure 10 kg (22 lb) 30 kg (66 lb)Weight 0,8 kg (1.8 lb) 2,1 kg (4.6 lb)

116


Because it is equipped with a rubber bladder in the tank, the pump can be used vertically or horizontally.

Maximum working pressure 70 MPa (10,000 psi)Required air pressure 0,6 - 1,0 MPa (87 - 145 psi)Oil capacity 200 - 750 cm3/min (12.2 - 45.8 in3/min)

Effective oil volume 1.000 cm3 (61 in3)Weight including oil 5,9 kg (11 lb)

Designation TMJA 70E

TMJA 70E (page 78)

Maximum pressure 50 MPa (7,250 psi)Volume/stroke 3,5 cm3 (0.21 in3)Oil container capacity 2.700 cm3 (165 in3)

Length of pressure hose 3.000 mm (118 in)Connection nipple G 1/4 quick connectionWeight 12 kg (26 lb)

Designation TMJL 50

TMJL 50 (page 78)

Maximum pressure 100 MPa (14,500 psi)Volume/stroke 1,0 cm3 (0.06 in3)Oil container capacity 800 cm3 (48 in3)

Length of pressure hose 3.000 mm (118 in)Connection nipple G 1/4 quick connection Weight 13 kg (29 lb)

Designation TMJL 100

TMJL 100 (page 79)

Maximum pressure 100 MPa (14,500 psi)Volume/stroke 0,5 cm3 (0.03 in3)Oil container capacity 250 cm3 (15 in3)

Length of pressure hose 1.500 mm (59 in)Connection nipple G 1/4 quick connection Weight 3,5 kg (8 lb)

Designation 729124 / 729124 A

729124 / 729124 A (page 79)

Maximum pressure 150 MPa (21,750 psi)Volume/stroke 1st Stage 17,5 cm3 below 2.5 MPa

(1.1 in3 below 362 psi)Volume/stroke 2nd Stage 1,25 cm3 above 2.5 MPa

(0.08 in3 above 362 psi)

Oil container capacity 2.300 cm3 (140 in3)Length of pressure hose 3.000 mm (118 in)Connection nipple G 1/4 quick connection Weight 12 kg (26 lb)

Designation 728619

728619 (page 80)

Injector 226270 226271

226270 and 226271 (page 80)

Designation DimensionsG A A1 F F1 L N

mm in mm in mm in mm in mm in mm in

226272 G 3/8 15 0.59 17 0.67 9 0.35 10 0.39 40 1.57 25,4 1.00 226273 G 3/4 20 0.79 22 0.87 14 0.55 15 0.59 50 1.97 36,9 1.45

With across Weightflats

mm in kg lb

226272 22 0.87 0,05 0.11226273 32 1.26 0,20 0.44

Valve nipple

117


Maximum pressure 400 MPa (58,000 psi) Pressure gauge connection G 1/2Pressure pipe connection G 3/4Length of floor support 570 mm (22.4 in)Weight 2,65 kg (6 lb)

Designation 226402

Maximum pressure 300 MPa (43,500 psi) 400 MPa (58,000 psi)Volume /stroke 0,23 cm3 (0.014 in3) 0,23 cm3 (0.014 in3)Oil container capacity 200 cm3 (12.2 in3) 200 cm3 (12.2 in3) Connecting threads G 3/4 G 3/4Weight 2,2 kg (5 lb) 2,2 kg (5 lb)

Designation 226400 226400/400MPa


Maximum pressure 300 MPa (43,500 psi) 400 MPa (58,000 psi)Handle force at max. pressure 300 N (67.5 lbf) 400 N (90 lbf)Volume per stroke 0,23 cm3 (0.014 in3) 0,23 cm3 (0.014 in3)Oil container capacity 200 cm3 (12.2 in3) 200 cm3 (12.2 in3)Weight 8 kg (18 lb) 8 kg (18 lb)Pressure gauge 1077589 1077589/2High pressure pipe 227957 A 227957 A/400MPa

Injector set TMJE 300 TMJE 400

TMJE series (page 81)

245 mm

610 mm

226402 (page 82)

* These pipes are also available in a 400 MPa execution. Designations are 227957 A/400MP and 227958 A/400MP.Outer diameter of the pipe is 6 mm (0.24 in)

** Maximum pressure 400 MPa (58.000 psi). Outer diameter of the pipe 6 mm (0.24 in).

*** The high pressure pipe 727213 A is designed to fit small OK-couplings. This pipe is not suitable for normal oil injection connection holes.

Designation Dimensions WeightG1 G A A1 Dw Dw1 L

- - - mm in mm in mm in mm in mm in kg lb

721740 A G 3/4 G 1/8 11,5 0.45 36,9 1.45 7,94 0.31 15,88 0.63 1.000 39 0,3 0.7227957 A* G 3/4 G 1/4 17,3 0.68 36,9 1.45 11,11 0.44 15,88 0.63 2.000 78 0,4 0.9227958 A* G 3/4 G 3/4 36,9 1.45 36,9 1.45 15,88 0.63 15,88 0.63 2.000 78 0,6 1.31020612 A** G 1/4 G 1/4 17,3 0.68 17,3 0.68 11,11 0.44 11,11 0.44 1.000 39 0,5 1.1728017 A G 1/4 G 1/4 17,3 0.68 17,3 0.68 11,11 0.44 7,94 0.31 300 12 0,2 0.4727213 A*** G 1/4 G 1/4 17,3 0.68 17,3 0.68 7,94 0.31 7,94 0.31 300 12 0,2 0.4729123 A G 3/4 G 1/4 17,3 0.68 36,9 1.45 7,94 0.31 15,88 0.63 300 12 0,3 0.7

Maximum working pressure 300 MPa (43,500 psi)Test pressure 400 MPa (58,000 psi)Test quantity 100%

Outer pipe diameter 4 mm (0.16 in)Inner pipe diameter 2 mm (0.08 in)Pipe lengths Between 300 mm (12 in) and

4000 mm (118 in) can be orderedeg. 227957A/3000 (3000 mm long)

High presure pipes (page 82)


118


Designation Thread Length Weight Suitable hex. key

mm in kg lb mm in

233950 G 1/4 15 0.59 0,02 0.04 6 0.24729944 G 1/2 16 0.63 0,03 0.07 9 0.351030816 G 3/4 22 0.87 0,05 0.11 14 0.55

Plugs for oil ducts and vent holes (page 83)

Designation Bore Outside Maximum Minimum Minimum End Working Length Weightdiameter diameter working burst bending fittings temperature

pressure pressure radius

mm in mm in MPa psi MPa psi mm in ˚C ˚F mm in kg lb

729126 4,0 0.16 10 0.39 100 14,500 300 43,500 65 2.6 G 1/4 -30/80 -22/176 1.500 59 0,4 0.9729834 5,0 0.20 11 0.43 150 21,750 450 65,250 150 5.9 G 1/4 -30/80 -22/176 3.000 118 0,9 2.0

Flexible high pressure hoses (page 83)

Designation Thread Dimensions Maximumd2 D2 C A pressure

Coupling mm in mm in mm in MPa psi

729831 A G 1/4 24 0.94 27 1.06 58 2.28 150 21,750

Nipples d1 D1 B A

729832 A G 1/4 22 0.87 14 0.55 46 1.81 150 21,750729100 G 1/8 17 0.67 14 0.55 43 1.69 100 14,500

Quick connection coupling and nipples (page 83)

729126 729834

* Pressure gauge for 728619 pump, see page 80.

Designation Pressure range Diameter Connection Weight AccuracyH thread

MPa psi mm in kg lb % of full scale

1077587 0-100 0-14,500 100 3.94 G 1/2 0,80 1.8 11077587/2 0-100 0-14,500 63 2.48 G 1/4 0,25 0.6 1,6TMJG 100D 0-100 - 76 3.00 G 1/4 0,27 0.6 ± 0.14 MPa/± 0.50 MPa728619-3* 0-150 0-21,750 63 2.48 M 18 x 1.5 0,25 0.6 1,6TMJG 200 0-200 0-29,000 100 3.94 G 1/2 0,80 1.8 11077589 0-300 0-43,500 100 3.94 G 1/2 0,80 1.8 11077589/2 0-400 0-58,000 100 3.94 G 1/2 0,80 1.8 1TMJG 15000D - 0-15,000 76 3.00 G 1/4 0,27 0.6 ± 20 psi/± 72.5 psi

Pressure gauges (page 83)

729832A729100 729831A

Maximum working pressure 300 MPa (34,500 psi)

Maximum working pressure 300 MPa (34,500 psi)

Plug 233950 Plug 729944 Plug 1030816

Designation Dimensions Key Weightwidth

G G2 A G1 G3 L

mm in mm in mm in mm in mm in kg lb

729654 NPT 1/4” G 1/4 25,4 1.00 15 0.59 15 0.59 42 1.65 22 0.87 0,25 0.55729655 NPT 3/8” G 1/4 25,4 1.00 15 0.59 15 0.59 40 1.57 22 0.87 0,25 0.55729656 NPT 3/4” G 1/4 36,9 1.45 20 0.79 15 0.59 45 1.77 32 1.26 0,30 0.66

Connection nipples with NPT tapered threads (page 84)

119


Designation With across Weightflats

mm in kg lb

1077456 10 0.39 0,05 0.111077455 10 0.39 0,05 0.111014357 A 22 0.87 0,06 0.131009030 B 22 0.87 0,06 0.131019950 32 1.26 0,14 0.311018219 22 0.87 0,07 0.151009030 A 32 1.26 0,13 0.291012783 22 0.87 0,08 0.181008593 A 32 1.26 0,15 0.331016402 22 0.87 0,10 0.22729146 32 1.26 0,18 0.40228027 32 1.26 0,25 0.55

Designation DimensionsG G2 A A1 G1 G3 L

mm in mm in mm in mm in mm in

1077456 M 8 M 6 11 0.43 5 0.20 15 0.59 9 0.35 33 1.30 1077455 G 1/8 M 6 11 0.43 7 0.28 15 0.59 9 0.35 33 1.30 1014357 A G 1/8 G 1/4 25,4 1.00 7 0.28 15 0.59 15 0.59 43 1.69 1009030 B G 1/8 G 3/8 25,4 1.00 7 0.28 15 0.59 15 0.59 42 1.65 1019950 G 1/8 G 1/2 36,9 1.45 7 0.28 15 0.59 14 0.55 50 1.97 1018219 G 1/4 G 3/8 25,4 1.00 9,5 0.37 17 0.67 15 0.59 45 1.77 1009030 A G 1/4 G 3/4 36,9 1.45 9,5 0.37 17 0.67 20 0.79 52 2.05 1012783 G 3/8 G 1/4 25,4 1.00 10 0.39 17 0.67 15 0.59 42 1.65 1008593 A G 3/8 G 3/4 36,9 1.45 10 0.39 17 0.67 20 0.79 52 2.05 1016402 G 1/2 G 1/4 25,4 1.00 14 0.55 20 0.79 15 0.59 42 1.65 729146 G 1/2 G 3/4 36,9 1.45 - - 17 0.67 20 0.79 50 1.97 228027 G 3/4 G 1/4 36,9 1.45 15 0.59 22 0.87 15 0.59 50 1.97

Connection nipples with metric and G pipe threads (page 83)

Extension pipe (D)

Designation 227965

Max. pressure 300 MPa (43,500 psi)Normally used in combination with high pressure pipe eg. 227957 A

Valve nipple with extension pipe (C)

Designation pipe 227964 nipple 227963

Max. pressure 300 MPa (43,500 psi) 300 MPa (43,500 psi)

M6 extension pipe with connection nipple (B)



M4 extension pipe with connection nipple (A)



Extension pipes with connection nipples (page 84)

A B C D

Maximum working pressure300 MPa (34,500 psi)

120

D E S I G N A T I O N I N D E X

EAZ 80/130 A-D Adjustable induction heaters 30 97HMV 10E/A101 - 200E/A101 Hydraulic nuts without threads 73 113HMV 10E - 200E Hydraulic nuts 73 110

HMVC 10E - 190E Hydraulic nuts, inch thread series 73 112HN 1 - HN 22 Hook spanners 10 88HN 5B - HN 22B Hook spanners 10 88

LAGD 125 SYSTEM 24 automatic lubricator 63 108LAGD 400 SYSTEM MultiPoint automatic lubricator 66 108LAGD 60 SYSTEM 24 automatic lubricator 63 108

LAGF 18 Grease filler pump 69 109LAGF 50 Grease filler pump 69 109LAGG 18A Mobile grease pump 69 109

LAGG 18M Grease pump 69 109LAGG 180A Grease pump 69 109LAGG 50A Grease pump 69 109

LAGH 400 Grease gun 68 109LAGM 1000 Grease meter 70 110LAGN 120 Grease nipples set 70 110

LAGP 400 Grease packer 67 109LAGS 8 Grease nozzle set 70 70LAGT 180 Trolley for drums 69 109

LAHD 1000 Oil leveller 67 109LAHD 500 Oil leveller 67 109LG.. greases Grease selection chart 54 104

LGAF 3E Anti-fret 60 108LGEM 2 High viscosity grease 59 107LGEP 2 Extreme pressure grease 56 105

LGET 2 Extreme high temperature grease 58 107LGEV 2 Extremely high viscosity grease 59 107LGFP 2 Food compatible grease 57 105

LGGB 2 Biodegradable grease 57 105LGHB 2 High viscosity, high temperature grease 58 107LGHP 2 High performance grease 57 105

LGHQ 3 High temperature grease 57 105LGLC 2 Low temperature, high speed grease 58 106LGLT 2 Low temperature grease 56 105

LGMT 2 All purpose grease 56 104LGMT 3 All purpose grease 56 104LGWA 2 Wide temperature range grease 58 106

LGWM 1 Extreme pressure, low temperature grease 59 107

LHDF 900 Dismounting fluid 84 84LHFP 120 Food compatible oil, SYSTEM 24 62 105

LHHT 265 High temperature oil, SYSTEM 24 62 105LHMF 300 Mounting fluid 84 84LHMT 68 Medium temperature oil, SYSTEM 24 62 105

LHRP 1 Anti-corrosive 60 108LHVI 1 Rust inhibitor 60 108THAP 030 Air-driven pump 77 115

THAP 030K Air-driven pump unit 77 115THAP 030/SET Air-driven pump set 77 115THAP 150 Air-driven pump 77 115

THAP 150K Air-driven pump unit 77 115THAP 150/SET Air-driven pump set 77 115THAP 300 Air-driven pump 77 115

THAP 300K Air-driven pump unit 77 115THAP 300/SET Air-driven pump set 77 115TIH 025 Induction heater 28 95

TIH 030 Induction heater 28 95TIH 060/120-15 Trolley (for TIH 060/120) 29 29TIH 060 Induction heater 28 95

TIH 120 Induction heater 28 95TIH 240 Induction heater 29 96TMAS series Precut machinery shims 39 100

TMAS D series Double slot shims 40 101TMBA G11 Heat resistant gloves 32 99TMBA G11D Disposable grease resistant gloves 59 108

Designation Product Product Technical information information

page page

1008593 A Nipple with pipe thread (G) 83 1191009030 A Nipple with pipe thread (G) 83 1191009030 B Nipple with pipe thread (G) 83 119

1012783 Nipple with pipe thread (G) 83 1191014357 A Nipple with pipe thread (G) 83 1191016402 Nipple with pipe thread (G) 83 119

1018219 Nipple with pipe thread (G) 83 1191019950 Nipple with pipe thread (G) 83 1191020612 A High pressure pipe 82 117

1030816 Plug for oil ducts and vent holes 83 1181077453 Extension pipe 84 1191077454 Connection nipple 84 119

1077455 Nipple with pipe thread (G) 83 1191077456 Nipple with pipe thread (G) 83 1191077587 Pressure gauge 83 118

1077587/2 Pressure gauge 83 1181077589 Pressure gauge 83 1181077589/2 Pressure gauge 83 118

1077600 Grease gun 68 1091077600/SET Grease gun set 68 1091077601 Flexible hose 68 68

226270 Screw injector 80 116226271 Screw injector 80 116226272 Valve nipple 80 116

226273 Valve nipple 80 116226400 Oil injector 81 117226400/400MPa Oil injector 81 117

226402 Adapter block 82 117227957 A High pressure pipe 82 117227958 A High pressure pipe 82 117

227963 Valve nipple 84 119227964 Extension pipe 84 119227965 Extension pipe 84 119

228027 Nipple with pipe thread (G) 83 119233950 Plug for oil ducts and vent holes 83 118234063 Connection nipple 84 119

234064 Extension pipe 84 119718909 - 718916 Impact spanners 11 89721740 A High pressure pipe 82 117

721867 series Aluminium ring series 31 99727213 A High pressure pipe 82 117728017 A High pressure pipe 82 117

728619 Hydraulic pump 80 116728619-3 Pressure gauge 83 118729100 Quick connection nipple 83 118

729101 B Oil injection kit 82 82729101 E Oil injection kit 82 82729123 A High pressure pipe 82 117

729124 Hydraulic pump 79 116729124 A Hydraulic pump 79 116729124SRB Hydraulic pump with digital gauge 75 113

729126 High pressure hose 83 118729146 Nipple with pipe thread (G) 83 119729654 Connection nipple 84 118

729655 Connection nipple 84 118729656 Connection nipple 84 118729659 C Electric hot plate 31 98

729831 A Quick connection coupling 83 118729832 A Quick connection nipple 83 118729834 High pressure hose 83 118

729865 A Feeler gauge 45 103729865 B Feeler gauge 45 103729944 Plug for oil ducts and vent holes 83 118

CMPK 200 Condition monitoring starter kit (English) 45 45CMPK 210 Condition monitoring starter kit (Metric) 45 45CMVP 40 Vibration pen (in/s) 46 103

CMVP 50 Vibration pen (mm/s) 46 103EAZ 130/170 A-H Adjustable induction heaters 30 97EAZ 166 - EAZ 378 Fixed induction heaters 30 97


page page

121

D E S I G N A T I O N I N D E X

TMJE 400 Oil injection set 81 117TMJG 100D Digital pressure gauge, MPa 83 118TMJG 15000D Digital pressure gauge, psi 83 118

TMJG 200 Digital pressure gauge 83 118TMJL 100 Hydraulic pump 79 116TMJL 100SRB Hydraulic pump with digital gauge 75 113

TMJL 50 Hydraulic pump 78 116TMJL 50SRB Hydraulic pump with digital gauge 75 113TMMA 3 Spring-operated jaw puller 16 90

TMMA 5 Spring-operated jaw puller 16 90TMMA 8 Spring-operated jaw puller 16 90TMMB 100 SKF Pullerboard 24 95

TMMC CARB™ bearing pullers 24 94TMMD 61 Blind housing puller kit 22 93TMMK 10-30 Combination kit of fitting tools

and pullers 14 14

TMMP 10 Heavy duty jaw puller 19 91TMMP 15 Heavy duty jaw puller 19 91TMMP 2x170 Standard jaw puller 18 90

TMMP 2x65 Standard jaw puller 18 90TMMP 3x185 Standard jaw puller 18 90TMMP 3x230 Standard jaw puller 18 90

TMMP 3x300 Standard jaw puller 18 90TMMP 6 Heavy duty jaw puller 19 91TMMR 120F Reversible jaw puller 18 90

TMMR 160F Reversible jaw puller 18 90TMMR 200F Reversible jaw puller 18 90TMMR 250F Reversible jaw puller 18 90

TMMR 350F Reversible jaw puller 18 90TMMR 40F Reversible jaw puller 18 90TMMR 60F Reversible jaw puller 18 90

TMMR 80F Reversible jaw puller 18 90TMMR 8 Reversible jaw puller set 18 90TMOT 1 Single function tachometer 43 102

TMOT 6-56 Remote optical sensor 43 102TMOT 6-57 Contact adapter 43 102TMOT 6-59 Reflective tape 43 102

TMOT 6-60 Installation bracket 43 102TMOT 6/LASER Multi function laser tachometer 43 102TMOT 6/SET Multi function tachometer, complete set 43 102

TMOT 6 Multi function tachometer 43 102TMSC 30-60 Internal bearing puller kit 21 93TMSC 6 Internal bearing puller kit 21 93

TMST 2 Electronic stethoscope 44 102TMTM 50-60 Early warning visual temperature device 46 46TMTM 60-70 Early warning visual temperature device 46 46

TMTM 70-80 Early warning visual temperature device 46 46TMTP 1(/F) General purpose thermometer 40 101

TMBA G11H Heat and oil resistant gloves 32 99TMBA G11R Reusable grease resistant gloves 59 108TMBA G11W Special working gloves 32 99

TMBH 1 SCORPIO induction heater 27 95TMBP 20 Blind housing puller kit 23 94TMBS 100 Strong back puller 21 92

TMBS 150 Strong back puller 21 92TMBS 50 Strong back puller 21 92TMCD 10R Horizontal dial indicator, mm 75 75

TMDC 1/2R Horizontal dial indicator, in 75 75TMCD 5P Vertical dial indicator 75 75TMDT 2 Digital thermometer 41 102

TMDT 2-30 Standard surface probe 42 102TMDT 2-31 Magnetic surface probe 42 102TMDT 2-32 Insulated surface probe 42 102

TMDT 2-33 Right angle surface probe 42 102TMDT 2-34 Gas and liquid probe 42 102TMDT 2-34/1.5 Gas and liquid probe 42 102

TMDT 2-35 Probe with sharp tip 42 102TMDT 2-35/1.5 Probe with sharp tip 42 102TMDT 2-36 Pipe clamp probe 42 102

TMDT 2-37 Extension cable 42 102TMDT 2-38 Wire probe 42 102TMDT 2-39 High temperature wire probe 42 102

TMDT 2-40 Rotating probe 42 102TMDT 2-41 Non-ferrous foundry probe 42 102TMDT 2-41A Dip-element 42 102

TMDT 2-42 Ambient temperature probe 42 102TMDT 2-43 Heavy duty surface probe 42 102TMDT 900(A) Digital thermometer 41 101

TMEA 1 Laser shaft alignment tool 35 99TMEA 1P Laser shaft alignment tool with printer 35 99TMEA 1PEx Intrinsically safe laser shaft alignment

tool with printer 35 99

TMEB 1 Laser belt alignment tool 38 100TMEH 1 Oil check monitor 44 103TMFS series Axial lock nut sockets 10 88

TMFS N series Axial lock nut sockets 10 89TMFT 33 Bearing fitting tool kit 12 90TMFT 7D Bearing fitting tool kit 12 90

TMHC 108 Hydraulic puller kit 20 92TMHK 35 Mounting & dismounting kit for

OK couplings 85 85TMHK 36 Mounting & dismounting kit for

OK couplings 85 85

TMHK 37 Mounting & dismounting kit for OK couplings 85 85


TMHK 38S Mounting & dismounting kit for OK couplings 85 85




TMHN 7 series Lock nut spanner kit 11 89TMHP 15 Hydraulically assisted heavy

duty jaw puller 19 91TMHP 30 Hydraulically assisted heavy

duty jaw puller 19 91

TMHP 50 Hydraulically assisted heavy duty jaw puller 19 91

TMHP 8 Hydraulic jaw puller kit 20 92TMHR 8 - 8/SET Hydraulic ram 17 90

TMHS 8 - 8/SET Hydraulic spindle 17 90TMJA 70E Air-driven foot-operated pump 78 116TMJE 300 Oil injection set 81 117


page page


page page

122

T A B L E O F C O N T E N T S

Precautions when mounting bearings in

a cold condition 8

Interference fits: cylindrical shafts 8

Interference fits: tapered shafts 9

Hook spanner HN and HN B series 10

Axial lock nut sockets TMFS and

TMFS N series 10

Impact spanners 718 series 11

Bearing lock nut spanner TMHN 7 series 11

Bearing fitting tools TMFT series 12

Combi Kit TMMK 10-30 14

Guide to SKF puller selection 15

TMMA puller series: EasyPull 16

Hydraulic ram TMHR 8/SET 17

Hydraulic spindle TMHS 8/SET 17

Standard jaw pullers TMMP series 18

Reversible jaw pullers TMMR F series 18

Heavy duty jaw pullers TMMP series 19

Hydraulically-assisted heavy duty

jaw pullers TMHP series 19

Hydraulic jaw puller kit TMHP 8 20

Hydraulic puller kit TMHC 108 20

Strong back pullers TMBS series 21

Internal bearing puller kits TMSC series 21

Blind housing puller kit TMMD 61 22

Blind housing puller kit TMBP 20 23

CARB™ bearing pullers TMMC series 24

Pullerboard TMMB 100 24

Mounting bearings using heat 26

SCORPIO induction heater TMBH 1 27

Small and medium induction heaters

TIH series 28

TIH 060/120-15 trolley 29

Large induction heater TIH 240 series 29

Adjustable induction heater EAZ series 30

Fixed induction heaters EAZ series 30

Electric hot plate 729659 C 31

Aluminium heating rings 721867 series 31

Gloves 32

Introduction to measuring instruments 34

Shaft alignment tools TMEA 1 series 35

Belt alignment tool TMEB 1 38

Precut machinery shims TMAS series 39

Double slot shims TMAS D series 40

ThermoPen TMTP 1 40



K-type thermocouple probes 42

Tachometer TMOT series 43

Electronic stethoscope TMST 2 44

OilCheck monitor TMEH 1 44

Feeler gauges 729865 45

Basic Condition Monitoring Package

CMPK series 45

Vibration Penplus CMVP series 46

TempGuard TMTM series 46

M E C H N I C A L T O O L S Page H E A T E R S Page I N S T R U M E N T S Page

123

T A B L E O F C O N T E N T S

Correct bearing lubrication for

Trouble-Free Operation 48

SKF sets the standard 48

Glossary of lubrication terms 49

SKF grease for all important

bearing applications 52

Basic bearing grease selection 53

Quick bearing grease selection guide 53

SKF bearing grease comparison chart 54

SKF bearing greases 56

Gloves 59

Anti-fretting agent LGAF 3E 60

Rust inhibitor LHVI 1 60

Anti corrosive agent LHRP 1 60

Correct bearing lubrication is essential

to long bearing life 62

SYSTEM 24 single-point

automatic lubricator

LAGD 125 and LAGD 60 63

DialSet Re-lubrication Calculation Program 64

Accessories support usage of

SYSTEM 24 65

SYSTEM MultiPoint automatic lubricator

LAGD 400 66

Oil Leveller LAHD series 67

Grease packer LAGP 400 67

Grease gun 1077600 68

One hand operated grease gun LAGH 400 68

Grease filler pumps LAGF series 69

Grease pumps LAGG series 69

Lubrication accessory sets LAGS 8 /

LAGN 120 70

Grease meter LAGM 1000 70

Oil Power - the SKF oil injection method 72

Hydraulic nuts HMV E series 73

SKF Oil Injection CD-ROM 74

Adapter and withdrawal sleeves for

Oil Injection 75

The SKF Drive-up Method 75

Drive-up Method CD-ROM 76

Hydraulic pumps and oil injectors

selection guide 77

Air-driven hydraulic pumps, THAP series 77

Hydraulic pump TMJA 70E 78





Screw injectors 226270 and 226271 80

Oil injector 226400 series 81

Oil injection sets TMJE 300 and 400 series 81

Oil injection kits 729101 series 82

Adapter block 226402 82

High pressure pipes 82

Pressure gauges 83

Plugs for oil ducts and vent holes 83

Flexible high pressure hoses 83

Quick connecting coupling and nipples 83

Connection pipes with metric and

G pipe threads 83

Connection nipples with

NPT tapered threads 84

Extension pipes with connecting nipples 84

Mounting and dismounting fluid LHMF 300

and LHDF 900 84

OK coupling mounting and dismounting kits 85

L U B R I C A N T S Page L U B R I C A T O R S Page O I L P O W E R Page

124

© Copyright SKF 2001The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless permission is granted.

In line with our policy of continuous development of our products we reserve the right to alter thespecifications given in this catalogue regarding anyproduct and/or part thereof without prior notice.

Although care has been taken to ensure the accuracyof this publication, SKF does not assume any liabilityfor errors or omissions.

Concept, text, graphic design and production:SKF Maintenance ProductsMijdrecht, The Netherlands

Photography:Yves PaternosterAmsterdam, The Netherlands(and others)

Printing:Drukkerij Verweij B.V.,Mijdrecht, The Netherlands

This catalogue was printed on elementary chlorine-free paper.

SKF on internet:www.skf.comwww.mapro.skf.com

MP

30

00

E

Imagine using nearly 100 years of bearing experience to create just

the right maintenance tools . . . . SKF Maintenance Products did.

© Copyright SKF 2001/4 www.mapro.skf.com / www.skf.comSKF Maintenance Products

catalogo herramientas skf

Documents