catalogo encofrado atlas
TRANSCRIPT
www.atlasform.com 1
DESIGN, MANUFACTURE, & SUPPLY SPECIALISTSOF CONCRETE FORMING & SHORING SYSTEMS
CONCRETE ACCESSORIES, TILT-UP, PRECAST AND CONCRETECONSTRUCTION CHEMICALS & RESTORATION PRODUCTS
SALES AND RENTALS
With an emphasis on concrete related products, Atlas Construction Supply, Inc. is a suppliersupportive to General Contractors and Concrete Sub-Contractors & Precasters.
Atlas Construction Supply, Inc. and its affi liated names of The Atlas Companies, Atlas FormingSystems, and Atlas Tech Products, present the design, fabrication, and supply of concreteforming and shoring systems, along with other accessories and construction products.
We, at Atlas Construction Supply, identify ourselves as Contractor Committed. Our commitmentis centered on an understanding that our purpose for existence rests on effectively serving our customers’ construction needs.
To provide such a service, we continuously from our inception in 1980, have recognized theeffectiveness achievable for the benefi t of our customers by coupling product with people.
All these presented products have signifi cant value added through representation by the AtlasConstruction Supply employee team. Our people, with considerable product and functionknowledge, are guided by a corporate directive to use their own best judgement with theirfocus on their customers at all times.
This company was made to be advised, infl uenced, and directed by our customers...
A Customer Company.
Service...Quality...Commitment.
San Diego: Corporate Offi ce4640 Brinell St.
San Diego, CA 92111(858) 277-2100
fax (858) 277-0585
Los Angeles2745 Raymond Ave.Signal Hill, CA 90755
(562) 595-1006fax (562) 595-4117
Phoenix1611 South 27th Ave.Phoenix, AZ 85009
(602) 256-0600fax (602) 256-0687
Las Vegas4840 W. Hacienda Ave.Las Vegas, NV 89118
(702) 227-6800fax (702) 222-0488
Denver4800 Race St.
Denver, CO 80216(303) 298-7777
fax (303) 298-7778Mexico
001 (877) 586-2100
ATLAS LOCATIONS:
San Francisco (510) 353-0100
www.atlasform.com2
MANUFACTURER PRODUCTSAtlas Forming & Shoring Systems AL-SPEED® Frame, A-Deck Shoring System, Truss & Column Mounted
Flying Deck Forms, Garage Beam Forms, ACS Panel Wall Form, Atlas Aluminum & Wall Beam Systems, Ganged & Handset Column Forms.
Atlas Concrete Accessories Concrete Form Form Panels, LVL EDGE Form, Post Shores, Safety Rail Post, Bridge Overhang Bracket, Waler Jacks.
Atlas Tech Products Form Releases, Curing Compounds, Sealers, Bondbreakers, Epoxies, Grouts, Repair Mortars, Underlayments, Toppings & Shake-On Floor Hard-eners. Concrete Restoration-Polymer Concrete Overlays & Methacrylates.
ABT, Inc. Precast Trench Drain Systems, Polydrain, Trench Former.Arcis / Access Tile ADA Detectable Warning Panels.Aztec Concrete Accessories Rebar Supports, Concrete Dobies, Edge Forms & Adhesives.BMD, Inc. Nails & Fasteners, Masking & Duct Tape. Chapin Industrial Concrete Sprayers.Dayton Superior Formwork Accessories, Formliners, Tilt-Up & Precast Accessories, Bar
Supports, Rebar Splicing Systems, Chemical & Repair Products. Deslauries Column Forms, Capitol Forms, Box Voids.Durajoint PVC Waterstops, Adhesive Waterstops & Accessories.Fortifi ber Corp. Curing & Protection Paper, Moistop Vapor Barrier.General Technologies, Inc. (GTI) Slab Bolsters, Bar Chairs & Post-Tensioned Slab Products.Global Mfg. / Viber-Kelley Internal & External Vibrators, Concrete Placing Equipment.Greenstreak / Vinylex Speed Dowels / PVC Waterstops, Plastic Control Joints, Chamfer.Henry Co. Synko-Flex & Hydro-Flex Adhesive Waterstops.Hogan Company Steel Stakes, Curb Forms & Accessories.McTech Group Ultracure Curing Blankets, EZ Cover, EZ Dowel Load Transfer SystemMFG Construction Products Fiberglass Column Forms & Pans, Waffl e Slab & Custom Forms.Meadow Burke Forming Accessories, Snap Ties, Taper Ties, Coil Rod, Anchors, Inserts,
Rebar Supports & Other Accessories.Multiquip Construction Equipment Pumps, Mixers, Power Trowels, Screeds & Generators.Proline Decorative Concrete Stamps, Color Hardeners, Stains, Etc.Quikrete Cement, Concrete, Sand, Aggregates & Other Building Materials. Roseburrough Tool Co. Concrete Tools & Accessories.Sonoco Products Sonotube Forms & Void Forms.Symons Concrete Accessories & Forming Products.TRM Manufacturing Polyethylene Film Products.Unitex Epoxies, Form Releases, Bondbreakers, Surface Retarders & Specialites.Universal Building Products Concrete Accessories, Snap Ties, Taper Ties, Coil Rod, Anchors, Inserts,
Stakes, Dowels & Dowel Baskets.Universal Forest Products Plywood, LVL, Lumber & Building Materials.US Mix Products Cement Products, Repair Mortars & Chemicals.Western Insulfoam Specialty & Standard Styrofoam (Custom Sizes Available).Weyerhaeuser / TrusJoist Edge Forming Materials, LVL, Other Lumber & Building Materials.W.R. Meadows Chemicals, Expansion Joint & Plastics, Vapor Retarder & Paving Products.
www.atlasform.com 3
AL-SPEED® SHORING FRAME, A-DECK POST SHORE & JOIST DROPHEAD SHORING SYSTEM, COLUMN MOUNTED & TRUSS FLIERS, GARAGE BEAM SYSTEM, ACS PANEL WALLFORM, GANGED ALUMINUM/ LVL WALLFORMS, RADIUS WALL FORMS, HANDSET WALL PANELS, COLUMN FORMS.
POST SHORES, SAFETY RAIL POSTS, OVERHANG BRACKETS, SNAP TIES, TAPER TIES, COIL ROD, FORMING PLYWOOD, ENGINEERED LUMBER, FORMLINER.
FORM RELEASE AGENTS, CURING COMPOUNDS, SEALERS, BONDBREAKERS, EPOXIES, GROUTS, REPAIR MORTARS, DECK OVERLAYS & CRACK SEALERS, SHAKE-ON FLOOR HARDENERS, DECORATIVE CONCRETE SYSTEMS.
SLAB BOLSTER, BAR CHAIRS, WHEELS, DOBIES, BAR COUPLERS & SPLICE SYSTEMS, TIE WIRE, DOWEL BASKETS.
EDGE FORM, STEEL STAKES, TRENCH DRAIN, EXPANSION JOINT FILLERS, EXPANDED POLYSTYRENE, VAPOR RETARDERS, WATERSTOP, DETECTABLE WARNING PANELS.
PICK-UP INSERTS, BRACES & BRACE ANCHORS, LIFTING HARDWARE
MIXERS & PUMPS, CONCRETE BUCKETS, VIBRATORS, SPRAYERS, TROWELS & FINISHING EQUIPMENTHAND TOOLS.
VOID FORM, AREA WELLS, FABRICATED STEEL POSTS & BEAMS, METAL DECKING.
20-FOR
MIN
G
AC
CESSO
RIES
30-CH
EMIC
ALS
& R
EPAIR
40-REB
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
TABLE OF CONTENTS10-FO
RM
ING
&
SHO
RIN
G
GENERAL TERMS & SAFETY NOTES
SECTION 10 - FORMING & SHORING SYSTEMS
SECTION 20 - FORMING & SHORING ACCESSORIES
SECTION 30 - ATLAS TECH PRODUCTS- CHEMICALS & REPAIR PRODUCTS
SECTION 40 - REBAR SUPPORTS & ACCESSORIES
SECTION 50 - FLATWORK ACCESSORIES
SECTION 60 - TILT UP & PRECAST PRODUCTS
SECTION 70 - FOUNDATION PRODUCTS
SECTION 80 - TOOLS & PLACING EQUIPMENT
INDEX
www.atlasform.com4
OSHA REGULATIONS FOR FORMWORK AND SHORING
Here and on the following page are reproduced the United States Occupational Safety and Health Act provisions regulating concrete construction, concrete forms, and shoring. This material is taken from the U.S. Department of Labor: “Occupational Safety & Health Administration”, 29CFR, Part 1926 (as published originally in the Federal Register, V. 37, No. 243, Dec. 16, 1972). It is the contractor’s responsibility to confi rm the following regulations have not been revised, amended or superceded; or that any additional Local, State, or Federal regulations may be applicable for the location of the project.Subpart Q-Concrete and Masonry Construction
1926.760 Scope, application and defi nitions applicable to this subpart.
(a)Scope and application. This subpart sets forth requirements to protect all construction employees from the hazards associated with concrete and masonry construction operations performed in workplaces covered under 20 CFR part 1926. In addition to the requirements in subpart W, other relevant provisions parts 1910 and 1926 apply to concrete and masonry construction operations. (b) Defi nitions applicable to this subpart. In addition to the defi nitions set forth in 1926.32, the following defi nitions apply to this subpart. (1) Bull fl oat means a tool used to spread out and smooth concrete. (2) Formwork means the total system of support for freshly placed or partially cured concrete, including the mold or sheeting (form) that is in contact with the concrete as well as all supporting members including shores, reshores, hardware, braces, and related hardware.(3) Lift slab means a method of concrete construction in which fl oor, and roof slabs are cast on or at ground level and, using jacks, lifted into position. (4) Limited access zone means an area alongside a masonry wall, which is under construction, and which is clearly demarcated to limit access by employees. (5) Precast concrete means concrete members (such as walls, panels, slabs, columns, and beams) which have been formed, cast, and cured prior to fi nal placement in a structure. (6) Reshoring means the construction operation in which shoring equipment (also called reshores or reshoring equipment) is placed, as the original forms and shores are removed, in order to support partially cured concrete and construction loads.(7) Shore means a supporting member that resists a compressive force imposed by a load. (8) Vertical slip forms means forms which are jacked vertically during the placement of concrete.(9) Jacking operation means the task of lifting a slab (or group of slabs) vertically from one location to another (e.g., from the casting location to a temporary (parked) location or it its fi nal location in the structure), during the construction of a building/structure where the lift-slab process is being used.
{53 FR 22643, June 16, 1988, as amended at 55 FR 42328, October 18, 1990}
1926.701 General Requirements
(a) Construction loads. No construction loads shall be placed on a concrete structure or portion of a concrete structure unless the employer determines,
based on information received from a person who is qualifi ed in structural design, that the structure or portion of the structure is capable of supporting the loads.(b) Reinforcing steel. All protruding reinforcing steel, onto and into which employees could fall, shall be guarded to eliminate the hazard of impalement. (c) Post-tensioning operations. (1) No employee (except those essential to the post-tensioning operations) shall be permitted to be behind the jack during tensioning operations. (2) Signs and barriers shall be erected to limit employee access to the post-tensioning area during tensioning operations. (d) Riding concrete buckets. No employee shall be permitted to ride concrete buckets.(e) Working under loads. (1) No employee shall be permitted to work under concrete buckets while buckets are being elevated or lowered into position. (2) To the extent practical, elevated concrete buckets shall be routed so that no employee, or the fewest number or employees, are exposed to the hazards associated with falling concrete buckets. (f) Personal protective equipment. No employee shall be permitted to apply a cement, sand, and water mixture through a pneumatic hose unless the employee is wearing protective head and face equipment.
{53 FR 22643, June 16, 1088, as amended at 59 FR 40730, August 9, 1994}
1926.702 Requirements for equipment and tools.
(a) Bulk cement storage. (1) Bulk storage bins, containers, and silos shall be equipped with the following: (i) Conical, or tapered bottoms; and (ii) mechanical or pneumatic means of starting the fl ow of material. (2) No employee shall be permitted to enter storage facilities unless the ejection system has been shut down, locked out, and tagged to indicate that the ejection system is not to be operated. (b) Concrete mixers. Concrete mixers with one cubic yard (.8m3) or larger loading skips shall be equipped with the following: (1) A mechani-cal device to clear the skip of materials; and (2) Guardrails installed on each side of the skip. (c) Power concrete trowels. Powered and rotating type concrete troweling machines that are manually guided shall be equipped with a control switch that will automatically shut off the power whenever the hands of the operator are removed from the equipment handles. (d) Concrete buggies. Concrete buggy handles shall not extend beyond the wheels on either side of the buggy. (e) Concrete pumping systems. (1) Concrete pumping systems using discharge pipes shall
be provided with pipe supports designed for 100 percent overload. (2) Compressed air hoses used on concrete pumping system shall be provided with positive fail-safe joint connectors to prevent separation of sections when pressurized. (f) Concrete buckets. (1) Concrete buckets equipped with hydraulic or pneumatic gates shall have positive safety latches or similar safety devices installed and prevent premature or accidental dumping. (2) Concrete buckets shall be designed to prevent concrete from hanging up on top and the sides. (g) Tremies. Sections of tremies and similar concrete conveyances shall be secured with wire rope (or equivalent materials) in addition to the regular coupling or connections. (h) Bull fl oats. Bull fl oat handles, used where they might contact energized electrical conductors, shall be constructed or nonconductive material or insulated with a nonconductive sheath whose electrical and mechanical characteristics provide the equivalent protection of a handle construction of a nonconductive material. (i) Masonry saws. (1) Masonry saws shall be guarded with semicircular enclosure over the blade. (2) A method for retaining blade fragments shall be incorporated in the design of the semicircular enclosure. (j) Lockout/Tagout Procedures. (1) No employee shall be permitted to perform maintenance or repair activity on equipment (such as compressors, mixers, screens or pumps used for concrete and masonry construction activities) where the inadvertent operation of the equipment could occur and cause injury, unless all potentially hazardous energy sources have been locked out and tagged. (2) Tags shall read Do Not Start or similar language to indicate that the equipment is not to be operated.
1926.703 Requirements for cast-in-place concrete.
(a) General requirements for formwork. (1) Formwork shall be designed, fabricated, erected, supported, braced and maintained so that it will be capable of supporting without failure all vertical and lateral loads that may reasonably be anticipated to be applied to the formwork. Formwork which is designed, fabricated, erected, supported, braced and maintained in conformance with the Appendix to this section will be deemed to meet the requirements to this sections will be deemed to meet the requirements of this paragraph. (2) Drawings or plans, including all revisions, for the jack layout, formwork (including shoring equipment), working decks, and scaffolds, shall be available at the jobsite. (b) Shoring and reshoring. (1) All shoring equipment (including equipment use in reshoring operations) shall be inspected prior to the erection to determine that the equipment meets the requirements specifi ed in the formwork drawings.
www.atlasform.com 5
OSHA REGULATIONS CONTINUED(2) Shoring equipment found to be damaged such that its strength is reduced to less than that required by 1926.703(a)(1), shall not be used for shoring. (3) Erected shoring equipment shall be inspected immediate after concrete placement. (4) Shoring equipment that is found to be damaged or weakened after erection, such that its strength is reduced to less than that required by 1926.703(a)(1), shall be immediately reinforced. (5) The sills for shoring shall be sound, rigid, and capable of carrying the maximum intended load. (6) All base plates, shore heads, extension devices, and adjustment screws shall be in fi rm contact, and secured when necessary, with the foundation and the form. (7) Eccentric loads on shore heads and similar members shall be prohibited unless these members have been designed for such loading. (8) Whenever single post shores are used one on top of another (tiered), the employer shall comply with the following specifi c requirements for formwork: (i) The design of the shoring shall be prepared by a qualifi ed designer and the erected shoring shall be inspected by an engineer qualifi ed in structural design. (ii) The single post shores shall be vertically aligned. (iii) The single post shores shall be spliced to prevent misalignment. (iv) The simple post shores shall be adequately braced in two mutually perpendicular directions at the splice level. Each tier shall also be diagonally braced in the same two directions. (9) Adjustment of single post shores to raise formwork shall not be made after the placement of concrete. (10) Reshoring shall be erected, as the original forms and shores are removed, whenever the concrete is required to support loads in excess of its capacity. (c) Vertical slip forms. (1) The steel rods or pipes on which jacks climb or by which the forms are lifted shall be: (i) Specifi cally designed for that purpose; and (ii) Adequately braced where not encased in concrete. (2). Forms shall be designed to prevent excessive distortion of the structure during the jacking operation. (3) All vertical slip forms shall be provided with scaffolds or work platforms where employees are required to work or pass. (4) Jacks and vertical supports shall be positioned in such a manner that the loads do not exceed the rated capacity of the jacks. (5) The jacks or other lifting devices shall be provided with mechanical dogs or other automatic holding devices to support the slip forms whenever failure of the power supply of lifting mechanism occurs. (6) The form structure shall be maintained within all design tolerances specifi ed for the plumbness during the jacking operation. (7) The predetermined safe rate of lift shall not be exceeded. (d) Reinforcing steel. (1) Reinforcing steel for walls, piers, columns, and similar vertical structures shall be adequately supported to prevent overturning and to prevent collapse. (2) Employers shall take measures to prevent
unrolled wire mesh from recoiling. Such measures may include, but are not limited to, securing each end of the roll or turning over the roll. (e) Removal of formwork. (1) Forms and shores (ex-cept those used for slabs on grade and slip forms) shall not be removed until the employer determines that the concrete has gained suffi cient strength to support its weight and superimposed loads. Such determination shall be based on compliance with one of the following: (i) The plans and specifi cations stipulate conditions for removal of forms and shores, and such conditions have been followed, or (ii) The concrete has been properly tested with an appropriate ASTM standard test method designed to indicate the concrete compressive strength, and the test results indicated that the concrete has gained suffi cient strength to support its weight and superimposed loads. (2) Reshoring shall not be removed until the concrete being supported has attained adequate strength to support its weight and all loads in place upon it.
Readers are cautioned to refer directly to Title 8 of the California Code of Regulations and the Labor Code for detailed information regarding the regulation’s scope, specifi cations, and exceptions and for the other requirements that may be applicable to their operations.
Forms, Falsework, and Vertical ShoringBy defi nition concrete forms are considered falsework. Falsework, however, also includes support systems for forms, newly completed fl oors, bridge spans, etc., that provide support until appropriate curing or stressing processes have been completed. See below for selected SOs:A. Design of falsework1. Concrete formwork and falsework must be designed, supported and braced to safely withstand the intended load…1717(a)(1)2. Falsework design, detailed calculations, and drawings must be signed and approved by an engineer (Ca PE) if the falsework height (sill to soffi t) exceeds 14 ft., if the individual horizontal span length exceeds 16 ft., or if vehicle or railroad traffi c goes through the falsework...1717(b)(1)(A), (B)Note: for other falsework, approval may be provided by a manufacturer’s representative or a licensed contractor’s qualifi ed representative…1717(b)(2)(B), (C)3. Falsework plans must be available at the job site…1717(b)(3)4. Minimum design loads are as follows:…1717(a)(2)a) Total combined live and dead load: 100 psfb) Live load and formwork: 20 psf5. Additional loads must be considered in the design…1717(a)B. Erection of falsework1. Falsework must be erected on a stable, level, compacted base and supported by adequate pads, plates or sills…1717(b)(4)2. Shore clamps (metal) must be installed in accord with manufacturer’s instructions…1717(d)(2)C. Inspection1. Before pouring concrete on falsework requiring design approval, or an engineer (Ca PE) or the engineer’s representative must inspect for and certify compliance with plans…1717(c)(1)Note: For other falsework, the inspection and
certifi cation may be provided by a manufacturer’s representative or a licensed contractor’s qualifi ed representative…1717(c)(2)(B), (C)2. A copy of the inspection certifi cation must be available at the job site…1717(c)(3)D. Access to forms and falsework1. Joists (51/2 in. wide) at not more than 36 in. o.c. may be used as walkways while forms are placed…1717(d)(3)2. A plank (12 in. wide) may be used as a walkway while joists are placed…1717(d)(5)E. Fall protectionPeriphery rails are required as soon as supporting members are in place…1717(d)(4)Note: The area under formwork is a restricted area and must be posted with perimeter warning signs…1717(d)(6)(A)
GuardrailsGuardrails must be installed at the open sides of all work surfaces that are 71/2 ft. or higher, or workers must be protected by other fall protection or, if justifi ed, by a valid fall protection plan…1621(a)A.Guardrailing specifi cations1. Railing must be made from select lumber (or equivalent material) and must consist of:a) A wooden top rail that is 42 in. to 45 in. high that measures 2” x 4” or largerb) A midrail that is placed halfway between the top rail and the fl oor and that measures at least 1” x 6”c) A supporting post that measures at least 2” x 4” and is placed every 8 ft. …1620(a), (b), and (c)2. All railings should be capable of withstanding a load of 200 lbs.3. Railing constructed of substitute materials must meet the following requirements: a) The top rail must be smooth surfaced and 42 in. to 45 in. high above the fl oor, platform, etc. b) Protection between the top rail and the fl oor, platform, etc., must be equivalent to that pro-vided by the standard midrail.4. The top rail or midrail on scaffolding platforms may be substituted by the X-braces as specifi ed in the scaffolding regulations…1644(a)(6)B. Guardrailing applications1. Floor and roof openings: Floor and roof openings in any work surface must be railed or covered. The cover must be substantial, securely fastened, and able to withstand the load of workers or material. Covers must bear a sign stating-OPENING-DO NOT REMOVE…1632(b), (e)Note: Roof openings include skylights unless they meet the requirements of 3212(e). 2. Wall openings: Wall openings must be guarded if there is a drop of more than 4 ft. and the bottom of the opening is less than 3ft. above the working surface…1632(j)3. Elevators: Guardrails are required for elevator shaft openings that are not enclosed or do not have cages…16334. Falsework: Guardrails are required as soon as falsework-supporting members are in place…1717(d)(4)5. Demolition: Wall openings must be guardrailed during demolition except on the fl oor being demolished and on the ground fl oor…1735(k).
www.atlasform.com6
In its continued development of accessories and related working parts for the construction industry, Atlas Construction Supply has placed increasing emphasis on ensuring that material supplied from its manufacturing plants meets or exceeds the normal safety requirements for concrete construction. New product designs are tested in our fabrication plant and/or independent testing laboratories, fi eld tested and then modifi ed as required before production begins. The safe working loads listed in this price list were determined from these tests. Do not use any Atlas Construction Supply product before fi rst reading and understanding the instructions shown in the appropriate handbook. For safety, quality assurance must be extended to fi eld personnel with the contractor making sure that his employees are properly instructed in the use and installation of Atlas Construction Supply products. The safety factor to be applied to a particular product is a variable, depending on the degree of hazard or risk involved in the application of that product. In concrete construction, various job site conditions can often increase the degree of risk. Concentrated loads of reinforcing bars or storage of other types of construction materials on formwork, unsymmetrical placement of concrete, uplift, impact, use of motorized carts, formwork height, jerking of a crane during the lifting of concrete elements, use of a crane not adequate for the job, bouncing of the concrete elements after it has been lifted, are some of the conditions that have a high risk factor. Safety factors must be increased by the user to reduce these risks. It is for this reason that we state the minimum safe working loads of our products. Atlas Construction Supply recommends that the provisions of the American National Standards Institute’s (ANSI A 10.9), OSHA (Occupational Safety and Health Administration Act, Part 1926) and the American Concrete Institute’s Guide to Formwork for Concrete (ACI 347) be strictly followed when considering safety factors and safe working loads. We especially advise that the minimum safety factors listed below be adhered to. When there are unusual job conditions, these minimum safety factors must be increased by the user.
SAFETY FACTORS AND SAFE WORKING LOADS
Warning! When in doubt about the proper use or installation of Atlas Construction Supply’s accessories and hardware, contact Atlas Construction Supply for clarifi cation. Failure to do so may result in exposure of workers to unsafe conditions or hazards, resulting in the possibility of injury or death to workers in the vicinity of the jobsite.
Recommended Minimum Safety Factors
AccessorySafety Factor Type of Construction
Form Tie 2 to 1 All applications
Form Anchor 2 to 1 3 to 1
Formwork supporting form weight and concrete pressures onlyFormwork supporting weight of forms, concrete construction liveloads and impact
Form Hangers 2 to 1 All applications
Anchoring Inserts Used as Form Ties
2 to 1 Precast concrete panels when used as formwork
Brace Anchors 2 to 1 Bracing of tilt-up precast concrete wall panels
Inserts 3 to 1 Inserts used to make permanent connections between tilt-up orprecast concrete elements
Lifting Inserts 2 to 1 4 to 1
Tilt-up constructionPrecast concrete construction
Lifting Plates and Related Items
5 to 1 Hardware used for lifting and handling of tilt-up or precast concreteelements
www.atlasform.com 7
SAFETY NOTES AND PRODUCT APPLICATION
Liability
Atlas Construction Supply guarantees its products as shipped from the plant and when used within the scope of this catalog. These products are, however, intended for use by trained, qualifi ed and experienced workers. Even slight misuse or lack of supervision and inspection can contribute to serious accidents. All unusual applications should be carefully fi eld tested before general production use.
The user of Atlas products must evaluate the product application, determine the appropriate safe working load, and control all fi eld conditions to prevent applications of loads in excess of the safe working load. Safety factors as shown are approximate. Safe working loads should never be exceeded.
Availability
Because of the technical skills required, certain products in this catalog are available only to those customers who have demonstrated the ability to apply and service these products properly.
Worn Working Parts
It is the user’s responsibility to continually inspect working hardware for wear and to discard the parts when wear is noted. DO NOT straighten bent bolts, rather discard and replace. Discard any bolts known to have been used at loads of 70% ultimate strength or more. Such bolts may have been stretched suffi ciently to become brittlehard.
Impact wrenches must not be used to tighten bolts that are part of a form tie system, form anchor, or hanger system.
Shop, Field Arc Welding
DO NOT WELD TO ANY CASTING unless in the opinion of a qualifi ed engineer such weld is in a no load - non-critical area. Welding to iron castings can cause extreme brittleness to form near the weld area and can destroy nearly all of the casting’s load value.
WIRE PRODUCTS are often tack welded for positioning. Since we cannot control either the workmanship or conditions under which this work is done, Atlas DOES NOT GUARANTEE any product altered in the fi eld by welding or bending.
Design Changes
Atlas reserves the right to change product designs, safe working load ratings and product dimensions at any time without prior notice to users. (Such changes will be made only for product improvement or further safety.)
Interchangeability
Many of the products that Atlas Construction Supply manufactures and supplies are designed as a system. Atlas cannot guarantee that the components from systems supplied by other manufacturers are completely interchangeable with components supplied by Atlas.
WARRANTY
Atlas Construction Supply will refund the price of or replace, at its election, any product which it fi nds to be defective provided the product has been used properly. EXCEPT AS EXPRESSLY STATED ABOVE, THE COMPANY MAKES NO WARRANTY OF MERCHANTABILITY AND NO WARRANTY OF FITNESS FOR ANY PARTICULAR PURPOSE NOR DOES IT MAKE ANY WARRANTY, EXPRESS OR, IMPLIED, OF ANY NATURE WHATSOEVER WITH RESPECT TO THE PRODUCT OR THE
USE THEREOF, BY WAY OF ILLUSTRATION AND NO LIMITATION, IN NO EVENT SHALL THE COMPANY BE LIABLE FOR DELAY CAUSED BY DEFECTS, FOR LOSS OF USE, FOR INDIRECT, SPECIAL OR CON-SEQUENTIAL DAMAGES, OR FOR ANY CHARGES OR EXPENSES OF ANY NATURE INCURRED WITHOUT ITS WRITTEN CONSENT. THE FOREGO-ING IS THE FULL EXTENT OF THE RESPONSIBILITY OF THE COMPANY EVEN THOUGH THE COMPANY MAY HAVE BEEN NEGLIGENT.
FORMING &SHORING
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
8
AL-SPEED® Shoring Frame The innovative Atlas AL-SPEED® Frame is a strong, light and durable shoring frame that improves the quality and speed of concrete construction, eases formwork set-up and removal, and reduces construction costs. This premier aluminum frame is the result of rigorous research and testing; all performedto provide our customers with the very best shoring system available.
High Load CapacityThe high load capacity of the AL-SPEED®
frame, combined with being lightweight (50 lbs) and requiring minimal components, provides contractors with a shoring frame that is safe, effi cient and economical.
Atlas Construction Supply takes pride in providing our customers with shoring solutions that will lead to accomplished project objectives and lasting relationships.
VersatilityThe versatility of the AL-SPEED® Frame allows for quick erection and dismantling of simple and intricate deck layouts. The AL-SPEED® system also has fewer parts than other shoring systems, therefore maximizing productivity and minimizing jobsite losses/thefts.
Frame Sizes (width x height)• 6’ x 6’, 6’ x 5’, 6’ x 2’8”• 3’ x 6’, 3’ x 5’, 3’ x 2’8”
Call Atlas for competitive pricing on HDO, MDO and PSF plywood. Atlas stocks various sizes and styles of plywood to
suit different project requirements.
ALUMINUM SHORING FRAME HANDSET SHORING SYSTEM
AL-SPEED® SHORING FRAME
FORMING &SHORING
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
9
ADVANTAGES OF THE AL-SPEED® FRAME
Aluminum: Lightweight and Durable. Will provide a long service life.
High Shoring Coverage - up to 16 kip / leg. 32,000 lbs. support capacity per 50 lb. frame.
Versatile system can accommodate both simple or intricate deck designs.
Less time and labor needed for erection and dismantling than othersystems.
6’ wide frame reduces total number of frames needed to support suspended concrete and formwork. Approximately 100 Sq. Ft. per frame, up to 12” slab thickness.
Minimal parts and components. Frame is complete with integral bearingsurfaces.
6’, 5’, & 2’ 8” high frames accommodate all shoring heights (4’6” Min.).Available in 6’ or 3’ widths.
Only 2 revolutions per inch for AL-SPEED® jacks. Quick set-up and removal of system.
Striated horizontal rails. Quicklock System allows for easy connection and removal of crossbraces.
*One Semi-truck can carry up to 10,000 Ft2 of shoring equipment for up to 12” deck.
AL-
SPEE
D®
FR
AM
E C
OM
PON
ENTS
AL-SPEED® SHORING FRAME
HANDSET ALUMINUM FRAME ®
®
®
®
FORMING &SHORING
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
10
BEAMS AND STRINGERS
CROSSBRACES
LVL BEAMS
FRAME SIZES
Frame Capacity 3 Tiers High, Cross-Braced TowersSafety Factor= 2.5 : 1 Equal Screwjack Extension, Top & Bottom
6.5” Aluminum Beams available in standard lengths:
7’0”, 9’0”, 10’6”, 12’0”, 14’0”, 16’0”, 18’0”, and 21’0”
7.5” Stringers available in standard lengths 8’0”, 10’0”,12’0”, 14’0”, 16’0”, and 20’0”
Available in standard 4” x 4” with 7’ and 14’ lengths.
AL-SPEED® SHORING FRAMEHANDSET ALUMINUM FRAME
6’ x 5’ Frame
6’ x 6’ Frame
3’ x 5’ Frame3’x 2’8” Frame
6” x 2’8” Frame
3’ x 6’ Frame
Cross braces available in standard sizes:4’ X 4’, 4’ X 6’, 4’ x 8’, 4’ x 10’
FORMING &SHORING
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
11
ATLAS A-DECKTM
POST, JOIST & DROPHEAD HANDSET SHORING SYSTEM
ATLAS A-DECKTM is a post, joist and drop-head handset shoring system designed to maximize labor productivity and reduce formwork cycle time. The primary components include hi-capacity post shores with drop heads, aluminum girders and LVL joists. The ATLAS A-DECKTM system provides a high level of productivity through the use of a 6’ x 8’ grid pattern, easy to handle components, and drop-heads for early retrieval and cycling of joists, girders and plywood. The ability to install the system from the ground with simple light-weight components results in added safety and overall ease of use.
The A-DECKTM drophead provides contractors a safe and faster early-retrieval system than ‘rotary’ stylestripping mechanisms. A single, unimpeded, square hammer blow can disengage the loaded wedge, dropping the girders and joists 4” for fast and easy removal. A fi xed key prevents an unsecured wedge from prematurely disengaging.
For mid & high rises, A-DECKTM perimeter tables can be used for building perimeters which incorporate 3’ of workspace beyond the slab edge. The tables are available in a large combination of widths and depths.
SMALLER PRONG USED PRIMARILY FOR GRID JOIST.
LARGER PRONG USED PRIMARILY FOR ALUMINIUM GIRDERS.
WEDGE AND TRAY DROP 4”.
DROP-HEAD BOLTS TO TOP OF POST SHORE.
STRIKE WEDGEWITH HAMMER TOENGAGE ANDDISENGAGE.
FORMING &SHORING
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
12
ATLAS A-DECKTM
• Post shores can accommodate soffi t heights from 6’-11” to 11’-7”, or up to 14’-5” with available extension.
• Can support a 12” thick concrete slab on 6’ x 8’ grid throughout entire post range, including use of extension. (Up to 15’-5” fi nished fl oor to fi nished fl oor). • Can support slabs up to 48” thick throughout post range with standard equipment.
• Drop-head allows for early retrieval of joists and girders formwork and untrapped plywood while loaded post shore remains intact.
• 6’ x 8’ grid pattern reduces the amount of post shores required, reduces installation time, and is well suited for the use of 4’ x 8’ plywood sheets.
• Joists and girders are individually labeled by length to facilitate identifi cation on the job site.
• Fast cycling of equipment by means of fast- actuating drop-head, racks, baskets and carts.
• Hammer is only tool needed to install and strip system.
•Easily ties into A-DECKTM perimeter tables or AL-SPEED® shoring frame.
ATLAS A-DECKTM ADVANTAGES
FORMING &SHORING
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
13
ATLAS A-DECKTM
A-DECKTM Carts: Atlas offers customers the convenience of A-DECKTM Carts designed to hold girders, LVL joists, posts and drop-heads. Contractors can easily move material from one part of the job site to another and store material.
• 4” drop distance facilitates removal of girders, joists, and plywood.
• 3.5” X 3.5” LVL joists offer increased ability to place and secure plywood.
• Girders allow for use of conventional 4X4’S or 4X6’S when obstructions exist.
• Allows for double camber conditions, up to 10% slopes in each direction.
• Rigid braces provide better system stability than standard “jet-lock” style crossbraces.
• Quick release post shore pin allows 1/8” drop to facilitate removal of post shore.
• Drop head allows for changing direction of joist by 900.
ATLAS A-DECKTM TECHNICAL FEATURES
FORMING &SHORING
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
14
ATLAS A-DECKTM TABLES
ATLAS A-DECKTM perimeter tables can be used for building perimeters which incorporate 3’ of workspace beyond the slab edge. The tables are available in a large combination of widths and depths, including up to 24’ wide by 20’ deep, and provide safety railing that complies with OSHA regulations even after the slab has been cast. The tables are easily cycled up the building with the 4-cable adjustable A-DECKTM caddy, which is available in either single level or dual level sizes. In addition, the tables have hinging legs that can ‘fl y over’ undisturbed fall protection on the level below.
PERIMETER TABLES
FORMING &SHORING
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
15
DYNAMIC SHORING SYSTEM
HIGH CAPACITYSHORING SYSTEM
The Dynamic shoring system was developed to decrease labor costs and increase productivity for high slab and high load capacity projects. Legs, frames and beams create a shoring system with minimal components that can support loads up to 25,000 lbs per leg.
ICS Dynamic Shoring System has three leg sizes: 5’7”, 9’6” and 14’1” allowingcontractors to achieve virtually any slab height. Versatility makes the Dynamic system the perfect choice for high slab and high capacity projects such as bridge supports, tunnel construction and power plants.
FORMING &SHORING
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
16
TrussesIn addition to handset decking systems, Atlas offers fl ying deck forms and truss solutions for repetitive, multi-reuse projects.
Trusses are available in variable height aluminum or steel confi gurations. Joists are typically aluminum beams.
Features of Atlas fl ying deck forms are:
• Aluminum and steel trusses
• Aluminum joists
• Table sizes up to 36’ wide and 85’ long
ATLAS TRUSS DECK
TRUSS & JOIST TABLE FORMS
FORMING &SHORING
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
17
Atlas offers column mounted deck systems that allow for fast cycling of repetitive deck layouts, without the need for typical reshore. The components include hi-capacity column mounted jacks, castellated primary members, and open web or aluminum joists.
Features of Atlas Column Mounted Deck Systems:
• Hi-capacity column mounted jacks with integral rollers.
• Castellated beams with open web or aluminum joists.
• Table sizes up to 30’ wide and 100’ long.
• Minimal or no reshore necessary.
• Fast pour cycles.
For more information on the Atlas Column Mounted Jack see page 38.
ATLAS COLUMN MOUNTED DECK
COLUMN MOUNTED TABLE FORMS
FORMING &SHORING
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
18
The Garage Beam System(GBS) is a comprehensive design and equipment plan for post-tensioned concrete beam and slab parking structures. The system consists of long beam form assemblies, high-capacity leg supports, column and capital forms, and reusable deck panels. All Garage Beam components are quickly handled and moved with forklifts and dollies for maximum forming productivity and reduced labor costs.
Beam FormsThe beam forms feature long assemblies faced with 3/16” steel skin plate for strength, durability and excellent concrete fi nish. No tie system or added beam bracing is required.
Capital FormsAll-steel capital forms are designed specifi cally for typical exterior or “pass-through” interior locations. Forms are steel-faced for smooth concrete fi nish and include steel chamfer. Provisions for post-tension cable penetrations are also included in the capital form design.
Deck PanelsDeck panels are fi eld-fabricated with a template using wood or aluminum beams and HDO plywood allowing spans up to 22’-0” without center shoring. The HDO plywood deck panels produce a consistently smooth concrete fi nish and provide maximum reuse.
GARAGE BEAM SYSTEM-GBS
GARAGE BEAM SYSTEM (GBS)
FORMING &SHORING
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
19
Atlas offers approaches for beam and slab post-tensioned parking structures where equipment can be cycled in applications ranging from totally handset to totally pre-fabricated.
Another feature of this system is that deck joists are typically designed to clear span in structural bays of up to 21’ in width. This not only eliminates the labor-intensive activity of center-bay post shoring, but also streamlines the reshoring requirement with regard to both equipment and labor costs.
Fabricated beam lengths, handset or partial handset garage beam options are available. Please contact an Atlas representative to discuss specifi c project requirements.
PARKING STRUCTURE FORM SYSTEM FOR
NON-TYPICAL BEAM SIZE
AL-SPEED® GARAGE BEAM SYSTEM
FORMING &SHORING
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
20
LightweightAtlas offers this wallform system weighing only 10 lbs./sq.ft. including 3/4” plywood skin, utilizing high strength aluminum members for both walers and strongbacks, and is offered for applications where rapid cycling and/or architectural surface fi nishes are required. The Atlas tie plate allows strongback channels to be set with a clear space of 3-1/2” between webs, allowing more lateral tie bolt adjustment than comparable systems.
Atlas provides a complete system which includes tie equipment, alignment braces, catwalk brackets, lifting hardware, and miscellaneous accessories requiring the customer to provide only plywood and incidental timber for catwalks and bulkheads, etc.
GANGED ALUMINUMWALL FORMS
ATLAS ALUMINUM BEAMWALL FORMS
FORMING &SHORING
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
21
PLAN VIEW
WALLFORM COMPONENTS
A-CLAMP ASSEMBLY
ANGLE BRACKET3 HOLE BRACE PLATE
BULK HEAD BRACKET
TIE PLATE
CATWALK/SCAFFOLDINGBRACKET
LIFTING LUG
GANGED ALUMINUMWALL FORMS
LIFTING LUG
A-CLAMP TIE PLATE
ALUMINUMSTRONGBACK(7-1/2”)
ALUMINUMBEAM(6-1/2”)
EDGE OF PLYWOOD
FORMING &SHORING
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
22
In addition to its all aluminum wallform system, Atlas offers LVL Wall Beams as joists (and/or strongbacks). These form components are typically used with a tie pattern of 4ft. x 4ft. creating a symmetrical pattern with plywood yielding favorable concrete fi nishes.
For more information on LVL wallbeam see page 40.
GANGED LVLWALLBEAM FORMS
ATLAS WALLBEAM FORMS
FORMING &SHORING
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
23
WALLFORM COMPONENTS
PLAN VIEW
ANGLE BRACKET3 HOLE BRACE PLATE
YOKE BRACKET
BULK HEAD BRACKET LIFTING LUGTIE PLATE
CATWALK/SCAFFOLDINGBRACKET
GANGED LVLWALLBEAM FORMS
LIFTING LUG
YOKE BRACKET
ALUMINUMSTRONGBACK(7-1/2”)
LVL WALLBEAM(5-1/2”)
TIE PLATE
EDGE OF PLYWOOD
FORMING &SHORING
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
24
JUMP FORM SYSTEM
ATLAS JUMP FORM SYSTEM
For external elevated form applications, Atlas offers an integrated jump form system to augment the gang forms.
The system utilizes the Atlas A100 Frame as its nucleus, which affords a 7’ wide working platform to service the elevated forms.
The system, suspended from jump-shoes bolted to the previous concrete lift, allows stripping, reworking, and preparation of the forms to proceed prior to crane assistance. This is achieved by means of a retracting carriage on which the form is mounted. The carriage allows approximately 30” of retractions from the previously cast face, giving adequate working clearance “inside” the form.
With all this activity being possible at the working level, the form never needs to be brought to ground level or stored elsewhere while decking activity is proceeding. With this system, it is no longer necessary for unacceptably lengthy crane-intensive hoisting operations to take place. Neither is it necessary for workers to “ride” the forms during re-setting, as the gang/platform unit is hoisted as one and landed into previously mounted jump shoes. Hoisting time is extremely brief.
An additional feature of the system is the trailing platform which is connected to the A100 Frame as the system climbs its way up the structure. This trailing platform serves several functions, namely:
• Allows convenient jump-shoe removal as construction proceeds.• Allows access to the safety tie-back.• Allows sacking and patching to be accommodated from this trailing platform.
FORMING &SHORING
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
25
ATLAS JUMP FORM SYSTEMJUMP FORM SYSTEM
COMPONENTS
ROLL BACK CARRIAGE
JUMP SHOE
PLATFORMBEAM
STRONGBACK CONNECTORS
SCREWJACK
A-100BRACKET
ROLL BACK CARRIAGE
A-100BRACKET
TRAILINGSCAFFOLDING
JUMP SHOE
WINDTIE
PLAN VIEW
FORMING &SHORING
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
26
ACS WALLFORM SYSTEM
The new ACS (Atlas Clamp System) heavy-duty modular ganged wallform offers an allowable 1,650 psf pour pressure, and weighs only 11 lbs per sq.ft. ACS provides Concrete Contractors with a high performance form that is easier to set-up, strip down and transport than other panel systems.
• Maximum safe working pressure of 1,650 psf with a 7/8” (20mm) thru-rod or 1-1/4” to 1” taper tie.• Maximum safe working pressure of 1,250 psf with a 5/8” (15mm) thru-rod. • The side rails support an 18mm Dulen-X® board or 5/8” Birch Plywood.• Rail profi le allows for easy clamping, long form life and is easier to repair than hollow frame panels.• Tie holes in large size panels are designed for high capacity ties.• The tie hole is in a conical shape for tie tolerances and for easier cleaning. • For bulkhead forming, spacer channels allow for wall thicknesses of 6” to 20” with adjustment increments of 1”.
ATLAS GANGED WALLFORMCLAMP SYSTEM
8’ x 10’ ACS Panel
10 ft
8 ft
Available Panel & Filler Sizes
FORMING &SHORING
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
27
ACS WALLFORM SYSTEM
The round wedge clamp provides an easy & fast method of connection between panels. The clamp works with any panel or fi ller size and allows for strong connections with minimal hardware. This one-piece clamp weighs only 3.5 lbs and has an admissible axial tension of 1,575 lbf. Typical Clamp Use:10’ height - 4 clamps8’ Height - 3 clamps4’ Height - 2 clamps
Atlas ACS Wedge Clamp
ATLAS GANGED WALLFORMCLAMP SYSTEM
• High Use Capability• 18mm Poly-Propylene Composite Panels• Durability - Constant rigidity throughout lifetime• No swelling, shrinking or delamination• Workable like wood- nailing, sawing • Same attachment to panel frame as plywood• Repairability• Less form release agent required • Easy to clean forms• Produces a dense & smooth concrete surface
Atlas ACS Features Dulen-X® BoardTHERMOPLASTIC
COATING
ALUMINUM
FOAMED THERMOPLASTIC CORE
The ACS spacer channel allows for an adjustment to wall thickness from
6” to 20” in increments of 1”.
ACS AccessoriesACS Crane Clamp
ACS Brace System
ACS Spacer Channel
FORMING &SHORING
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
28
ALISPLYMODULAR WALLFORM
STRAIGHT & RADIUS
This metric dimension, straight and radius modular forming system consists of a galvanized steel frame and a specially coated 15mm (5/8”) plywood face. It provides the strength, durability, versatility and concrete fi nish needed for most gangforming applications.
Panels and fi llersAvailable in a variety of widths from 25cm to 200cm, and heights of 1 meter or 3 meters, this range of panel and fi ller sizes means you’ll be able to form almost any wall dimension. When combined with corners and accessories, pilaster, bulkheads and columns can be formed with standard equipment.
Horizontal or verticalAlisply forms can be used horizontally or vertically, even within the same gang without compromising strength. Alisply has the strength required for the large contact areas and fast pour rates common in large gangform applications. With a design pressure of 1230 lbs/sq.ft., only two ties are needed for 3 meter panel heights.
Simple connectionsThe Alisply system features simple clamp connections that eliminate the need for tools and aligning bars. Setting up or changing the confi guration of gangs is fast and simple with these innovative attachment clamps, reducing assembly confusion, increasing productivity and simplifying the gangforming operations.
Alisply CircularAlisply Circular is a recoverable modular formwork system for circular fair-faced concrete walls, designed to be handled with a crane. Alisply Circular consists of a light galvanized steel frame and a 15 mm thick phenolic plywood lining. The frame incorporates tie rods that allow giving the wall the required radius on site.
FORMING &SHORING
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
29
The Atlas Adjustable Waler System is capable of servicing both segmental and full circular construction of round tanks. For full circular construction, the system can be utilized tieless, the walers being capable of withstanding lateral concrete pressures in the form of tension/compression rings.
The system comprises a ply-faced form, with aluminum beam vertical members, which are in turn supported by horizontally oriented adjustable waler units which create a true curve. This system allows pipe penetrations with a minimum of inconvenience.
Radius adjustments of 10’ and up can be accommodated.
The all-steel Flex-Form system has integral 4” deep vertical stiffeners with 3/16” steel skin plate to provide a 1,000 psf system that handles radius 5’ and over.
Pre-rolled steel ribs set the radius. Factory rolled top and bottom ribs bolt to fl exible panels to shape and securely hold the form in the radius required. Panels conform accurately to the radius of the ribs ensuring that the correct radius is achieved every time.
Panels are delivered to the job site pre-assembled to meet specifi c job requirements. Flex-Form panels are available in over 100 sizes, from 2’ wide by 1’ long to 10’ wide by 20’ long and are available on a sale or rental basis.
ATLAS GANGED RADIUS WALL FORM SYSTEM
RADIUS WALL FORMS
FLEX-FORM SYSTEM
FORMING &SHORING
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
30
Tied and Ganged One-sided FormsAtlas provides wall form equipment as described in the Ganged Wall Form Section along with weld brackets which are mounted to the soldier beams supporting shoring to the basement excavation typically at 8 ft. centers. Concrete placement rates at 5’/hr. can generally be accommodated, while still maintaining 5 ft. vertical spacing of ties. Standard inventory, snub-nosed coil taper ties are included as part of the system package, allowing both rapid installation and stripping of forms.
Tied and Handset One-sided FormsAtlas has a unique handset (craneless) approach to the forming of one-sided (blind) walls. The same components as above are utilized by individually placing aluminum beams. This design allows quick setting and stripping practices, along with the high load capacity of aluminum, absent of the use of a crane. This system is ideal for single lifts and projects with limited equipment and space.
Tie-Less Ganged One-sided FormsAtlas is able to offer a basic gang wall system, this time tieless through the concrete wall and connected to, and laterally supported by, the Atlas A-100 Frame secured to the fl oor or foundation below.
ONE-SIDED WALL FORMS
ONE-SIDED WALL FORMS
FORMING &SHORING
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
31
STEEL-PLY
HANDSET WALLFORMSThe Steel-Ply forming system is a pre-engineered, factory built, reusable concrete forming system. It may be used in handset or gang form applications, for commercial or residential structures. The Steel-Ply forming system can form walls of almost any shape or size, with accessories for special structures and details.
The Steel-Ply forming system saves time because it is easy to set up and strip. No measuring, sawing, drilling, or nailing is required. The only tool required is a hammer.
Steel-Ply is available in a variety of standard sizes which can be combined to form virtually any dimension. This forming system is constructed of laminated plywood mounted on steel frames. With proper care this system can be used up to 200 times before being reconditioned.
All standard panel sizes and most accessories are available on a rental or sale basis.
FORMING &SHORING
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
32
ATLAS COLUMN FORMS
ATLAS AL-SPEED® COLUMN FORMS
Atlas AL-SPEED® fully fabricated adjustable aluminum column form system offers the advantages of providing an effi cient column form solution while producing an architectural concrete fi nish. Fully fabricated forms are generally provided on a rental basis or job duration lease.
Atlas AL-SPEED® column forms are capable of 36” widths and generally utilized to a height up to 16 ft. They are provided with quick double closures (two piece) or hinged/single closures (one piece). Form skins are generally 3/4” HDO.
The AL-SPEED® column clamps are available as individual rental or sale items. AL-SPEED® fi ts columns from 14” x 14” up to 36” x 36”.
AL-SPEED® COLUMN FORM
MULTI-CHANNEL COLUMN FORM
Atlas Multi-Channel fully fabricated aluminum adjustable steel column form system offers the advantages of providing an effi cient column form solution while producing an architectural concrete fi nish. Fully fabricated forms are generally provided on a rental basis or job duration lease.
Atlas Multi-Channel forms are capable of 72” widths and have been used to heights of 45 ft. They are provided with quick swivel barrel assembly double closures. Atlas can offer these pre-assembled and delivered to the jobsite ready to use. The Multi-Channel column clamps are also available as individual rental or sales items. Multi-Channel Clamp fi ts columns from 12” to 72”.
ATLAS MULTI-CHANNEL COLUMN FORMS
FORMINGACCESSORIES
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
33
COLUMN FORMING
• Provides architectural concrete for all round columns.• Gives a glassy smooth concrete fi nish.• Can be left in place for full curing and protection until the job is fi nished.• Eliminates the need for water and sand blasting in most cases.• Forms up to 24” diameter will have one vertical seam; over 24” will have 2 seams.
ATLAS LINED TUBE
Atlas Lined Tube is designed to hold full hydrostatic pressure of concrete in a single pour. Forms can be stripped any time after two days, or left on to protect columns from spills and other hazards of construction until the job is fi nished.
Atlas Lined Tube combines the ease of handling, strength, and economics of one-piece paper tube column forms, with a poly liner that gives a smooth fi nish to the concrete, a fi nish that is sure to please the architect and owner.
Atlas Lined Tubes are made to order and can be delivered within 5 working days. Sizes are from 6 to 48 inches in diameter, and in almost any lengths.
ONE PIECE ROUND COLUMN FORMSOne-piece round column forms are economical, and produce a smooth concrete fi nish. Manufactured of fi berglass reinforced plastic, these forms will not dent, sag, rot or weather and require little or any maintenance. Round Column Forms are lightweight, easy to handle, and simple to set up and remove. RCF forms have only one vertical seam and are supplied complete with bracing collars and “fast” bolts. Round Column Forms are designed for repeat use. RCFs are available on a sale or rental basis with diameters from 12 to 48 inches; available in one-piece lengths up to 20 feet.
Heavy Duty Steel Column forms develop an exceptionally smooth, hard surface free of voids and with a minimum number of indistinct seams. All forms are galvanized constant radius steel half round sections and quarter round sections (for forms over 48” in diameter) bolted into units for crane handling on the job site. Each component is framed with fl ange angles diecut and punched for accurate fl ush butt joints without protrusion on the contact surface. Vertical and horizontal seams, opened and closed with each pour, are connected with high speed bolts to speed setting and stripping. All standard column diameters from 12” to 84” in 8’0, 4’0, and 1’0 lengths are available on a sale or rental basis.
STEEL ROUND COLUMN FORMS
FORMING ACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
34
COLUMN FORMING
SONOTUBE FINISH FREE FIBRE FORMSSonoco Finish Free fi bre form is lined with Duraglas coating that provides for a smooth concrete fi nish when forms are stripped. Duraglas will leave no spiral marks, seams or imperfections that would impact the fi nished surface of the concrete.
Available in lengths up to 12 feet and interior diameters from 12 to 36 inches. Forms can be cut to length and drilled at the job site to meet specifi c project requirements.
Sonotube forms are made from multiple layers of high quality fi bre, providing a strong, lightweight and easy to handle column form. The spiral wound and laminated Sonotube form is a one-piece unit; there are no assembly costs and the form may be cut to fi t any desired length.
USES• Round columns• Piers and footings• Pile forms• Light pole and fence pole bases• Flagstones and round steps
SONOTUBE FORMS
Inside Diameter
StandardProduct Code No.
Standard Wall Thickness
Product Code No. Heavy Weight
Heavy Wall Thickness
4” 0.120 0.145
6” 15.10.10106 0.120 15.10.20106 0.160
8” 15.10.10108 0.120 15.10.20108 0.160
10” 15.10.10110 0.140 15.10.20110 0.190
12” 15.10.10112 0.140 15.10.20112 0.190
14” 15.10.10114 0.165 15.10.20114 0.215
16” 15.10.10116 0.165 15.10.20116 0.250
18” 15.10.10118 0.190 15.10.20118 0.250
20” 15.10.10120 0.190 15.10.20120 0.295
22” 15.10.10122 0.210 15.10.20122 0.295
24” 15.10.10124 0.210 15.10.20124 0.295
26” 0.270 0.295
28” 0.295 15.10.20128 0.365
30’ 15.10.10130 0.295 15.10.20130 0.365
32” 0.295 0.365
34” 0.295 0.365
36” 15.10.10136 0.295 15.10.20136 0.365
42” 15.10.20142 0.445
48” 15.10.20148 0.505
60” 15.10.20160 0.600
FORMINGACCESSORIES
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
35
COLUMN CLAMPS
SCISSOR CLAMPS
1) 3/4” plywood with fl at 2 x 4s on 6” centers.2) Ten foot rate of pour.3) Pure liquid head of 150 lbs. per square foot of accumulated depth.4) Plywood defl ection between clamps limited to L/360 or 1/16”.5) Column Clamp safety factor = 2
• Quickly and easily applied or removed with no tools other than a carpenter’s hammer. Driving home permanently attached wedge pulls clamp tight.
• Bars are made of high strength carbon steel. Brackets are rugged malleable iron.
• Clean-Cut punched slots that provide tolerance adjustment.
• No detachable parts: a rivet prevents the bracket from slipping off. Wedges are chained to the brackets.
* Clamps are sold and rented by the piece, but two (2) pieces are required to make a useable clamp set.** Concrete dimensions based on 3/4” plywood with fl at 2 x 4’s at 6” on center.
FORMING ACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
36
The Atlas Post Shore is engineered for strength, installation effi ciency and long service life. This quality shoring product features high load capacities for shoring heights from 6’6” to 11’1” (8,100 lbs. fully closed to 5,100 lbs. at max extension*).
The Atlas Jumbo Shore is engineered for maximum strength, installation effi ciency and long service life. This quality shoring product features high load capacities for shoring heights from 6’5” to 9’10” (15,000 lbs. fully closed to 13,700 lbs. at max extension*).
The Atlas Jumbo Shore is fabricated with a secure locking pin that is inserted into one of the holes spaced at 4” intervals along the inner post. Once Jumbo Shore is set in position, a threaded collar with handle allows for easy height adjustment over a 6” range. With a high load capacity, the 59 lb. Jumbo Shore may be spaced further apart than other post shore systems, therefore reducing material and labor costs.
The Atlas Shores are quickly and safely set in place with 3 simple steps:1. Lift inner tube to approximate height required.2. Insert pin in nearest hole to desired height.3. Turn handle of threaded collar for fi nal adjustment.
• High Load Capacities at Shoring Heights From 6’5” To 11’1” 15,000 lbs. fully closed to 13,700 lbs. at max. extension *(3 To 1 Safety Factor) • Extremely High Strength To Weight Ratio (35 lb. Post Shore, 59 lb. Jumbo Post Shore)• Minimal Time And Labor Needed for Set-Up And Removal• Quick Disconnect/Breakdown System• Galvanized For Durability & Long Service Life• Easy Height Adjustment• Rolled Thread• No Loose Parts• Weatherproof• Head And Base Plates Drilled For Nailing
Heavy Duty Post Shores are available in three models providing adjustable shoring heights from 5’7” to 18’4”. These Post Shores each carry load ratings up to 10,000 lbs. (3 to 1 safety factor). With this higher load rating, Post Shores can often be spaced further apart, producing equipment and labor savings for the contractor.
Post Shores are quickly and safely set in place. They have a unique locking pin for approximate height adjustment. This pin is inserted into one of the holes spaced at 4” intervals along the length of the post. After the Post Shore is positioned, a threaded collar with a handle permits fi ne height adjustments over a 6” range.
ATLAS POST SHORES
350 & 550 POST SHORES
5.1
8.18.1
0
2
4
6
8
10
6' 6" 7' 2" 7' 10" 8' 6" 9' 2" 9' 10" 10' 6" 11' 1"Height
Safe
Wor
king
Loa
d (k
ips)
Atlas Post Shore Product Code No. 10.21.02402
Atlas Jumbo Shore Product Code No. 10.21.02412
Atlas Post Shore Load Capacities (3:1 safety factor)
350 Post Shore Product Code No. 12.50.45017
550 Post Shore Product Code No. 12.59.45018
FORMINGACCESSORIES
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
37
The Atlas AL-SPEED® Safety Rail Post opens wide and tightens quickly, allowing for easy application to practically any project. The post is easily installed, utilizing a top adjusting wing nut which creates an ability to tighten from a standing position. A newly designed base adds to the simplicity of setup with predrilled holes providing trouble-free fastening to decks. The post can also adjust to any slab size between 0”-29”, with the adjustable clamp extending to the full 29”, preventing the bottom piece from falling out. A redesigned top with drop pin makes the AL-SPEED® Safety Rail Post simple and effi cient to use. The AL-SPEED® Safety Rail Post is also galvanized for durability and designed to withstand the toughest jobsite conditions.
• Galvanized for maximum durability and service life.• Easily adjustable clamp secures to slab sizes between 0”-29”.• Predrilled holes at base provide for easy screwing to concrete slabs.• Top adjusting wing nut allows for tightening from a standing position. • Easy to maintain and transport from job to job.
AL-SPEED® Safety Rail Post Advantages
ATLAS AL-SPEED®
SAFETY RAIL POST TOP ADJUSTING WING NUT
2 x 4, 2 x 6 OR CABLE READY
TOEBOARD READY
CAPTIVE INNER MEMBER EXTENDS TO 29”
SAFETY RAIL POST
AL-SPEED Safety Guard Rail Post
Product Code No. 20.10.10100
AL-SPEED Safety Guard Rail Post Extension
Product Code No. 20.10.10110
Atlas AL-SPEED® Safety Rail Post Extension attaches to the Atlas AL-SPEED® Safety Rail Post and allows contractors to meet OSHA requirements of a 42” tall safety barrier after concrete is poured when standing on top of the fi nished concrete slab.
FORMING ACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
38
The Column Mounted Jack offers a 60 kip capacity adjusting element. The jack supports column mounted tables and is an integral part of the column hung deck system. Ideal uses include supporting steel “I” beams and fl ying tables.
Both light and heavy duty jacks offer a high capacity adjusting element to be utilized in conjunction with either 6” x 6” or 8” x 8” wood members (not included). Ideal uses include reshoring of structural steel “I” beams or reshoring concrete slabs supporting fl ying shoring tables.
COLUMN MOUNTED JACK
ATLAS WALER JACK
ATLAS BRIDGE OVERHANG BRACKET
ATLAS RESHORE JACK
FORMING COMPONENTS
AVAILABLE IN 30” AND 42”
40k Column Mounted Jack Product Code No. 10.30.30400
60k Column Mounted Jack Product Code No. 10.30.30600
Product Code Standard 12.51.46681
Product Code Heavy Duty 12.51.46941
Product Code Standard 20.20.21000
Product Code Deluxe 20.20.21100
Product Code 28” 20.10.21028
Product Code 42” 20.10.21042
FORMINGACCESSORIES
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
39
C-49
C-49-D
C-49-JR
C-51
C-51-R
BRIDGE OVERHANG BRACKET
BRIDGE OVERHANG BRACKET
BRIDGE OVERHANG BRACKET
WALL PLATE ASSEMBLY
ADJUSTABLE INSERT ADAPTER
Designed for use on prestressed concrete beams and medium depth steel beams.Short chord length allows brackets to be used where full sized brackets can not beutilized.Design allows Bracket to be used on prestressed concrete beams without requiring wood blocking.Accepts C-51 Wall Plate Assembly
Designed for use on deep steel plate girder beams.Aids in preventing web of beam from bending during construction of bridge deck.Accepts C-51 Wall Plate Assembly Note: C-49-D is shipped unassembled
Designed for use on prestressed concrete beams and medium depth steel beams.Aids in preventing web of beam from bending during construction of bridge deck.Design allows Bracket to be used on prestressed concrete beams without requiring wood blocking.Accepts C-51 Wall Plate Assembly† Under special conditions, Bracket can be adjusted to a minimum vertical height of 14”.
FOR ADJUSTABLE BRIDGE OVERHANG BRACKETFOR USE WITH 3/4” DIAMETER BOLT
FOR ADJUSTABLE BRIDGE OVERHANG BRACKET
Product Code No. Wt. Lbs.
20.10.21554 45.0 Ea.
Product Code No. Wt. Lbs.
50.0 Ea.
Product Code No. Wt. Lbs.
35.0 Ea.
Type Product Code No. Wt. Lbs.
Assembly 1.75 Ea.
Adjustment Plate Only .40 Ea.
Wall Bracket Only 1.35 Ea.
Product Code No. Wt. Lbs.
1.75 Ea.
Special Order
Special Order
Special Order
Special Order
FORMING ACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
40
Atlas Laminated Veneer Lumber (LVL) beam is an engineered wood fi ber that promotes innovative designs, effi ciencies and cost savings when used in our Atlas wall forms, deck forms, beam forms, column forms and other concrete forming applications. Atlas LVL beam is a durable and reusable forming element that is manufactured to resist bowing, shrinking and twisting; results in uniform, predictable and true line performance.
Atlas designs and engineers the LVL Beam in-house to accomodate multiple forming applications. This achieved fl exibility provides easy form construction and saves considerable time. The strength and stiffness provided in the LVL Beam minimize the amount of labor needed for constructing and utilizing the forms.
ENGINEERED LUMBER
FORMING PLYWOOD
PSF (Phenolic Surface Film) plywood offers concrete contractors signifi cant advantages over other types of forming panels:
• Superior concrete fi nish: smooth, hard, clean and consistent.• High durability for maximum # of reuses.• Excellent strength and stiffness.• Higher labor effi ciency.• Phenolic overlay pour surface on both sides of panel.• Edge sealed.• Attractive contact foot material costing.
PSF CONCRETE FORM PANEL
HDO CONCRETE FORM PANELHDO 100/30 is designed to provide multiple reuses and produce excellent concrete fi nishes at a lower per pour cost than other HDO forming panels. HDO 100/30 concrete form panels are made of high quality, exterior grade plywood with an high resin content face overlay for extra durability and smoothness.
FORMINGACCESSORIES
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
41
CHAMFER/FORMER STRIPSWOOD CHAMFER
RADIUS FORMERS
CHAMFER STRIPS
DRIP STRIPS
Made from a specially designed plastic material that provides a smooth, uninterrupted, rounded radius corner to poured concrete. The material strips cleanly from fi nished concrete and is easily removed from forms for reuse.
Provides a smooth, uninterrupted beveled edge to piers, beams, and all outside corners of poured concrete. They are easily applied, equipped with or without nailing fl ange to facilitate installation, and reusable for maximum economy.
Provides a smooth uniform drip groove on the underside of roof overhangs and porches. The material is nailed to the form and is easily removed from the concrete. It also can be reused several times.
Length Product Code No.
1/2” Pine 20.27.10050
5/8” Pine 20.27.10060
3/4” Pine 20.27.10075
1” Pine 20.27.10100
1-1/16” Pine 20.27.10107
1-1/2” Pine 20.27.10150
Length Product Code No.
1/2” All Plastic 20.27.20050
5/8” All Plastic 20.27.20060
3/4” All Plastic 20.27.20075
1” All Plastic 20.27.20100
1-1/16” All Plastic 20.27.20107
Length Product Code No.
1/2” Plastic Radius with Tail 20.27.22100
3/4” Plastic Radius with Tail 20.27.22075
FORMING ACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
42
FORMLINERS
Atlas offers the widest selection of architectural concrete formliners in the industry. Over 500 patterns and textures allow for design versatility; with custom sizes and patterns also available for specifi c job requirements. Contact your Atlas representative for information on patterns & sizes. A complete catalog is available with detailed information on each formliner.
Formliners are available in the following different materials depending on the specifi c application and the number of reuses required.
SPS Plastic - A single use plastic form liner designed for limited application. Made from a polystyrene plastic, the initial square foot price is much less than other types of formliner material. This proves very economical when only one use is needed.
ABS Plastic - Thermoformed in ABS plastic, these formliners exhibit good impact resistance and excellent overall performance. Reuse factor is 10, subject to pattern confi guration, proper handling and jobsite conditions.
Dura-Tex - An economical polyurethane elastomer formliner that possesses many of the qualities of premium elastomeric, but with slightly less durability. Pattern reproduction is excellent and the reuse factor is 40, subject to pattern confi guration, proper handling and jobsite conditions.
Elasto-Tex - A premium polyurethane elastomer formliner that exhibits exceptional durability and tear strength. It is fl exible enough to allow stripping from slight undercuts or complex designs and resilient enough to maintain pattern details. Reuse factor is 100, subject to pattern confi guration, proper handling and jobsite conditions.
PackagingFormliners are generally available in standard 4’ x 10’ sheets. Custom sizes and patterns are available upon request.
FORMINGACCESSORIES
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
43
FORMLINERS
Formliner Patterns
Hundreds of different sizes, shapes & textures are available in the following typical patterns:
• Fractured (Fin, Rib, Flute) • Wood • Brick • Block • Stone • Smooth Flute • Custom patterns also available!
Features of Formliners
• Nearly all patterns are available in 4 types of materials, ranging from single-use to 100 uses! • Hundreds of typical patterns to choose from. • Custom patterns also available. • Typical patterns provided in 4’ x 10’ sheets. • Consistent results. • Easy installation. • Easy to strip when Atlas Release or Bio-Guard is used as the form release agent. • Knowledgeable technical support.
Formliner Accessories
Form Release Agent - Atlas Release is an ideal form release agent for any of the Dayton Superior formliners. Atlas Bio-Guard water-based release agent has also produced excellent results on polyurethane formliners.
Rustication & Chamfer Strips - Create distinct features and bold reveals with easy to attach rustication & chamfer strips. These reusable strips provide sharp features to enhance the appearance of exposed concrete. Just nail to the form; also prevents leakage.
FORMING ACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
44
Once welded to the existing soldier beams, the Mike Bracket allows contractor time and labor saving versatility of employing a standard heavy-duty gang wall form system for a one-sided wall form. A coil nut is attached to the Mike Bracket in a manner that permits off-cen-ter entry with our snubnose taper tie.The Mike Bracket is produced of A-36 hot rolled steel. The Mike Bracket is to be ad-equately welded to the soldier beam with 3/8” fi llet weld, fully on each 3” side.
Safe Working Loads (2.0 to 1)1” Standard Mike Bracket - 18,000 lbs.1-1/4” Heavy Duty Mike Bracket - 36,000 lbs.
MIKE BRACKET
STAY-FORM/QUICKJETSTAY-FORM or Quickjet are ribbed ex-panded metal leave-in-place concrete forms that are used for forming bulkheads, pile caps, grade beams, blindside walls, bridge applications and wherever form removal is diffi cult. Construction joints are easily made; each side of STAY-FORM or Quickjet provides a substantial key for bonding abutting pour faces. STAY-FORM or Quickjet may also be used for curved forming applications, such as water treatment tanks.
• Reduces labor costs in diffi cult forming applications.• Joint scabbling is eliminated.• Allows for continuous placement of rebar.• May be cut to size to fi t specifi c project requirements.• Allows for visual inspection of concrete pour.• Pre-galvanized for jobsite storage.
Blind side walls are easily formed using STAY-FORM or Quickjet with a special HookTie and conventional formwork on face side.
FORMING COMPONENTS3/4” Plywood
Aluminum Beam
Snubnose Taper Tie
Atlas Tie Plate
Aluminum Strongback
3/4” Rib Height
Expanded meshbetween solid ribs
Stayform 97” STD SHEET
3/4” Plywood#5 Rebar
STAY-FORM
KeeperEnd Dimension
Lumber & Wedge
Lumber Dimension Wall Thickness + 7/8”
KeeperHook Tie
Brand Product Product Code No.
Stayform 27” x 97” panel 20.75.12797
Quickjet 19.7” x 78.7” panel 20.75.21500
Quickjet 23.6” x 78.7” panel 20.75.21600
Quickjet Quickjet Angle 20.75.22200
Standard Mike Bracket 20.20.63000
Heavy Duty Mike Bracket 20.20.62000
Quickjet 79” STD SHEET
FORMINGACCESSORIES
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
45
ATLAS FORM TIE ASSEMBLIES
Component Length Dia. Product Code No.
5/8” Plastic Cone 1-1/2” 1-5/8” 20.35.50006
7/8” Plastic Cone 1-1/2” 1-7/8” 20.35.50004
1” Plastic Cone 1-1/2” 2-1/4” 20.35.50003
Cone Removal Tool 20.35.70010
Component Size Wt. Lbs. Product Code No.
5/8” Lead Plug 5/8” .26 ea 20.28.45010
7/8” Lead Plug 7/8” .37 ea 20.28.45020
1” Lead Plug 1” .52 ea 20.28.45040
Component Bar Size
Sleeve O.D.
Sleeve I.D.
Product Code No.
3/4” PVC Sleeve 5/8” 1” 13/16” 50.41.07501
1” PVC Sleeve 7/8” 1-5/16” 1” 50.41.10001
1-1/4” PVC Sleeve 1” 1-11/16” 1-3/8” 50.41.12501
Component Taper Length Safe Working Load Product Code No.
DSI 7/8” Taper Tie 1”-1-1/4” 62” 38,200 Lbs. 10.63.12062
DSI 7/8” Taper Tie 1”-1-1/4” 72” 38,200 Lbs. 10.63.12072
Component Size Product Code No.
DSI Wing Nut 5/8” 10.63.16910
DSI Wing Nut Bracket / Cathead 5/8” 10.63.16920
DSI Wing Nut 7/8” 10.63.14910
DSI Wing Nut Bracket / Cathead 7/8” 10.63.14920
Component Size Product Code No.
Plate Washer 3” x 3” 20.31.83003
Component Size Length Safe Working Load Product Code No.
DSI Rod 5/8” 48” 19.6 Kips 10.63.16048
DSI Rod 5/8” 66” 19.6 Kips 10.63.16066
DSI Rod 5/8” 72” 19.6 Kips 10.63.16072
DSI Rod 7/8” 48” 33.7 Kips 10.63.14048
DSI Rod 7/8” 66” 33.7 Kips 10.63.14066
DSI Rod 7/8” 72” 33,7 Kips 10.63.14072
Component Size Product Code No.
DSI She Bolt 5/8” 10.63.16700
DSI She Bolt 7/8” 10.63.14700
Component Size Product Code No.
DSI Coupler 7/8” 10.63.14930
Component Item Code Catalog Page #
Coil Taper Tie D-9 68
Coil Rod B-12 59
Coil Wing Nut B-39 65
Coil She Bolt D-30 72
COIL FORM TIE ASSEMBLIESARE ALSO AVAILABLE
DSI HIGH STRENGTH FORM TIE ASSEMBLIES
FORMING ACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
46
STANDARD SNAP TIES- 2,250 Lbs.
SNAP TIE HEAVY-3,350 Lbs. Hex Head. 1” x 1” Cone Tie or loose washer tie. Standard Breakback is 13/16”
Made with 1” x 1” plastic cones or metal spreader. Other sizes available upon request. Hex head measures 1/2” across fl ats. Note: Because of high tension stress, 100% breakback is not guaranteed for hex head snap ties with L & W over 4-3/4”. Loose Washer ties available by special order.
Wall Size 4-3/4” L & W OnlyProduct
Code No.A-4-H
Wt. Lbs.per 100
6” 20.21.32106 23.5
7” 20.21.32107 24.7
7-5/8” 20.21.34107 25.4
8” 20.21.32108 25.8
9” 20.21.32109 26.9
10” 20.21.32110 28.0
11-5/8” 20.21.34111 29.9
12” 20.21.32112 30.3
14” 20.21.32114 32.6
15” 20.21.32115 33.7
16” 20.21.32116 34.8
18” 20.21.32118 37.1
20” 20.21.32120 39.4
22” 20.21.32122
23” 20.21.32123
24” 20.21.32124 43.9
28” 20.21.32128
30” 20.21.32130 50.6
36” 20.21.32136
Wall Size 8-1/4” L & W OnlyProduct
Code No.A-4-H
Wt. Lbs.per 100
5” 20.21.31105
6” 20.21.31106 31.8
7” 20.21.31107 32.9
7-5/8” 20.21.33107 33.6
8” 20.21.31108 34.0
9” 20.21.31109 35.1
10” 20.21.31110 36.3
11-5/8” 20.21.33111 38.1
12” 20.21.31112 38.5
13” 20.21.31113
14” 20.21.31114 40.8
15” 20.21.31115 41.9
16” 20.21.31116 43.0
18” 20.21.31118 45.3
20” 20.21.31120 47.6
24” 20.21.31124 52.1
26” 20.21.31126
28” 20.21.31128
30” 20.21.31130 58.9
36” 20.21.31136
48” 20.21.31148
Hex Head. Sold Only in Box of 100. Standard Breakback is 13/16”
Wall Size 8-1/4” L & W OnlyProduct Code No.
4-3/4” L & W OnlyProduct Code No.
6” 20.21.51106 20.21.52106
8” 20.21.51108 20.21.52108
9” 20.21.51109 20.21.52109
10” 20.21.51110 20.21.52110
11” 20.21.51111
12” 20.21.51112 20.21.52112
14” 20.21.51114 20.21.52114
16” 20.21.51116 20.21.52116
18” 20.21.51118 20.21.52118
22” 20.21.51122 20.21.52122
24” 20.21.51124 20.21.52124
32” 20.21.51132
EndWallEnd
Breakback
1” x 1” Plastic Cone
EndWallEnd
Breakback
1” x 1” Plastic Cone
FORMINGACCESSORIES
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
47
THREADED PULLOUT TIE 1,875 LBS.
SPANDREL POINT TIE
SPANDREL HOOK TIE
SPANDREL PLATE TIE
WATER SEAL FOR SNAP TIES
TIP TO TIP TIE - 2,250 LBS.
HEAVY DUTY SNAP TIE WEDGES
A-5
A-7-A
A-7
A-6
A-8
A-9Length Product
Code No.Wt. Lbs.per 100
Up to 29-1/2” O.A. 36.8
Special Order
Special Order
Special Order
Special Order
Special Order
Product Code No.
20.20.20010
Special Order
FORMING ACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
48
A-21-F
A-21-K
A-21-U
A-21-X
FLAT TIE
TIE KEY
STRAP TIE
X-FLAT TIE
Wall Size ProductCode No.
6” 20.22.20006
8” 20.22.20008
10” 20.22.20010
11” 20.22.20011
12” 20.22.20012
15” 20.22.20015
18” 20.22.20018
24” 20.22.20024
Wall Size Product Code No.
Wt. Lbs.per 100
8” 24.0
10” 28.4
12” 32.8
Product Code No.
Wt. Lbs. Packaging
50.0 per carton 1,000 per carton
Special Order
Special Order
Special OrderWall Size Product
Code No.Wt.Lbs.per 100
6” 20.6
8” 30.4
10” 34.8
12” 39.0
14” 41.2
16” 45.6
Heavy Duty available upon request.
FORMINGACCESSORIES
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
49
A-22
A-27
A-29
A-30
SPREADER CLEATS
BREAKBACK WRENCH
SNAP TIE SHANK WRENCH
TURNBUCKLE FORM ALIGNER
BETTER BAR/ FORM STRIPPING BARA heavy-duty tool that has many uses on any jobsite, from stripping forms tojockeying tilt-up panels. The handle is fabricated from 1x2 tubular steel that is carefully mig-welded to a heat-treated milled blade.
Wall Size End Size Product Code No.
Wt. Lbs.per 100
Packaging
6” 3/4” 36.3 100 per carton
8” 3/4” 43.1 100 per carton
10” 3/4” 47.9 100 per carton
12” 3/4” 52.7 100 per carton
6” 1-1/8” 41.0 100 per carton
8” 1-1/8” 47.8 100 per carton
10” 1-1/8” 52.6 100 per carton
12” 1-1/8” 57.4 100 per carton
Type Product Code No. Wt. Lbs.
A-27 20.20.00100 7.0 Ea.
A-27-M 7.0 Ea.
Product Code No. Wt. Lbs.per 100
2.3 Ea.
Product Code No. Wt. Lbs.
1.5 Ea.
Type Product Code No. Wt. Lbs.
3” Blade 80.48.6200 15.0 Ea.
5” Blade 15.0 Ea.
Special Order
Special Order
Special Order
FORMING ACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
50
A-31
A-35
A-40
A-44
A-45
WRENCH HEAD SNAP TIE SOCKET
STRONGBACK TIE
CONE REMOVAL WRENCH
STAINLESS STEEL SNAP TIE
BASE TIE
For breaking back Sure-Snap Hex Head
Atlas Construction Supply cannot guarantee a proper breakbackdue to variations of properties in stainless steel wire.
Wall Size Product Code No.
6” 20.22.30006
8” 20.22.30008
9” 20.22.30009
10”
12”
Type Product Code No. Wt. Lbs.
Hex A-31 0.8 Ea.
Product Code No.
20.35.70010
Special Order
Length Product Code No. Wt. Lbs.
7-1/2” .250 Ea.
Special Order
Special Order
FORMINGACCESSORIES
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
51
LOOP TIES A-46A-48
Available in full cartons only.All other sizes and conditions available.
2,250 Lbs. Standard 3,000 Lbs. Heavy Duty
A-48 GANG LOOP PANEL TIE
Wall Size Product Code No.
6” 20.22.10006
7”
8” 20.22.10008
9”
10” 20.22.10010
12” 20.22.10012
13” 20.22.10013
14” 20.22.10014
15” 20.22.10015
16” 20.22.10016
18” 20.22.10018
20” 20.22.10020
24” 20.22.10024
28” 20.22.10028
30” 20.22.10030
32” 20.22.10032
36” 20.22.10036
40” 20.22.10040
Wall Size Product Code No.
6”
7”
8”
9”
10”
12”
14”
15”
16”
18”
20”
24”
A-46 LOOP PANEL TIE
Wall Size Product Code No.
6”
7”
8”
10”
12”
13”
14”
15”
16”
18”
20”
24”
3,000 Lbs Heavy Duty
Special Order
FORMING ACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
52
A-49
A-51
A-52
A-53
LOOP TIES (SPECIAL)
WEDGE BOLT
Z TIE HOLDER
WALER TIE
Available in full cartons only.
Available in full cartons only.
Special Order
Available in full pails only.
Size Product Code No. Wt. Lbs. per 100 Packaging
2 x 4 12.55.60062 11.5 200 per carton
2 x 6 12.22.60063 14.0 200 per carton
Product Code No. Wt. Lbs. per 100 Packaging
12.55.60058 12.0 500 per pail
Product Code No. Wt. Lbs. per 100 Packaging
12.55.60056 70.0 50 per carton
A-46 LOOP PANEL TIES FRACTION OR SPECIAL BREAKBACKA-46 LOOP PANEL TIE WATER RESISTANTA-46 LOOP PANEL TIE WITH CONESA-46 LOOP PANEL TIE WATER RESISTANT WITH CONES
FORMINGACCESSORIES
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
53
A-54
A-55
A-56
CONCRETE PLUGS
SURE-LOCK TIE - 2,250 LBS.
SURE-LOCK BRACKET
For fi lling holes left by plastic cones; eliminates job patching problems.Use Atlas Acryl Bond or Epoxy Bonder to glue in the plug.Stocked in Grey onlyAvailable in full cartons only.
Sold only in boxes of 100 ties with 1” x 1” self-centering plastic cone.Other Non-Stock ties available with 15/16” ends.
With 1” x 1” self-centering plastic cone
Size Product Code No. Wt. Lbs.per 100
Packaging
1” x 1” Snap Tie Cone Plugs 20.28.40010 2.4 1000 per carton
Wall Size Product Code No. Wt. Lbs.per 100
6” 18.0
7” 19.0
7-5/8” 20.0
8” 21.0
9” 22.0
10” 23.0
11-5/8” 25.0
12” 26.0
14” 29.0
15” 31.0
16” 32.0
18” 33.0
20” 35.0
24” 40.0
Product Code No. Wt. Lbs. Packaging
1.4 Ea. 50 per carton
Special Order
Special Order
FORMING ACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
54
SPEEDY BRACKET
SURE-LOCK® STRONGBACK
STIFFBACK BRACKET
SURE PLUG
SURE PLUG INSERTION TOOL
A-56-A
A-57
A-57-A
A-58
A-59
FOR PLUGGING HOLES IN CONCRETE AFTER REMOVING TAPER TIES
FOR INSERTION OF THE A-58 SURE PLUGS
Other sizes available
Note: To order complete A-59 Insertion Tool specify the size of plug. Stems for plug sizes 16, 20 and 24 are interchangeable in a common insertion tool.The stem for plug size 11 will work only with the insertion tool made for size 11 plugs.
Size Nominal Dia. Length Product Code No. Wt. Lbs.per 100
16 1” 1-1/4” 20.28.30010 4.8
18 1-1/8” 1-3/8” 20.28.30020 5.2
20 1-1/4” 1-3/8” 20.28.30030 7.3
Product Code No. Wt. Lbs.
1.5 Ea.
Special Order
Product Code No. Wt. Lbs. Packaging
0.5 Ea. 100 per carton
Special Order
Product Code No. Wt. Lbs.
1.3 Ea.
Plug Size Product Code No.
11
14-16
18-20
22-24
Special Order
Special Order
FORMINGACCESSORIES
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
55
A-63
A-81
A-82
A-83
A-86
LOOP STRONGBACK TIE
JAHN “A” BRACKET
JAHN “C” BRACKET
JAHN CORNERLOCK
JAHN TIE EXTENDER
Available in full cartons only.
Available in full cartons only.
Available in full cartons only.
Available in full cartons only.
Available in full cartons only.
Jahn “A” bracket; use with loose 2 x 4 walers and plywood for forming any type wallEccentric compensates for 2 x 4 variations
Jahn “C” bracket; for attaching vertical strong-backs where alignment is needed - high walls, foundations
Jahn Cornerlock; for outside corners, pilasters and columnsQuickly locks outside corners with cam action handleCan be used with other forming systems
Jahn Tie Extender; converts short-end snap tie into a long-end snap tie.
U.S. Patent No. 2,967,689
U.S. Patent No. 3,771,757
Size Product Code No. Wt. Lbs. per 100
Packaging
4” x 4” 15.5 100 per carton
4” x 6” 17.6 100 per carton
6” x 6” 19.6 100 per carton
Special Order
Product Code No. Wt. Lbs. Packaging
20.20.10001 1.4 Ea. 50 per carton
U.S. Patent No. 2,967,689
Product Code No. Wt. Lbs. Packaging
20.20.10002 1.1 Ea. 75 per carton
Product Code No. Wt. Lbs. Packaging
20.20.10010 2.0 Ea. 20 per carton
U.S. Patent No. 3,203,717
Product Code No. Wt. Lbs. Packaging
20.20.10020 0.2 Ea. 100 per carton
FORMING ACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
56
A-87
A-88
A-89
A-90
A-100
JAHN RIVET
JAHN ECCENTRIC
JAHN SCAFFOLD JACK
SCAFFOLD BRACKET (JACK)
SPEED STEP
FOR JAHN A & C BRACKETS
MEETS OSHA REQUIREMENTS
U.S. PATENT NO. 3,000,605
Packaged Ten (10) pcs. per carton.
Jahn Scaffold Jack; one piece all-steel unit, easily attaches to Waler BracketsFor 24” x 24”, 16” x 24” or 16” x 16” tie spacings
Special Order
Special Order
Product Code No.
Product Code No.
Product Code No. Wt. Lbs.
20.20.10040 17.0 Ea.
Product Code No. Wt. Lbs.
23.0 Ea.
Special Order
Product Code No. Wt. Lbs.
0.8 Ea.
Special Order
FOR JAHN A & C BRACKETS
A-97 4 X 4 POST SHORE CLAMP
Product Code No. Wt. Lbs. Packaging
20.10.31010 3.050 Ea. 1 bag (20 pcs.)
FORMINGACCESSORIES
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
57
B-1B-3B-4
COIL TIES
B-1, 1/2” Dia.(4,500 Lbs.)
Standard 2-Struts
B-1/B-3, 1/2” Dia.(4,500 Lbs.)
Standard 2-Struts
B-1, 1/2”” Dia.(6,750 Lbs.)
Heavy 2-Struts
B-1/B-3, 1/2” Dia.(6,750 Lbs.)
Heavy 2-Struts
Various Sizes AvailableSpecial Order
Various Sizes AvailableSpecial Order
Various Sizes AvailableSpecial Order
Various Sizes AvailableSpecial Order
Special Order
† Neoprene Water Seal furnished as standard,metal Water Seal available on special order.
B-1, 3/4” Dia.(6,750 Lbs.)
Standard 2-Struts
B-1/B-3, 3/4” Dia.(6,750 Lbs.)
Standard 2-Struts
B-1, 3/4” Dia.(9,000 Lbs.)
Heavy 2-Struts
B-1/B-3, 3/4” Dia.(9,000 Lbs.)
Heavy 2-Struts
Various Sizes AvailableSpecial Order
Various Sizes AvailableSpecial Order
Various Sizes AvailableSpecial Order
Various Sizes AvailableSpecial Order
B-1, 1” Dia.(13,500 Lbs.)
Standard 2-Struts
B-2, 1” Dia.(18,000 Lbs.)
Standard 4-Struts
B-2, 1-1/4” Dia.(27,000 Lbs.)
Heavy 4-Struts
Various Sizes AvailableSpecial Order
Various Sizes AvailableSpecial Order
Various Sizes AvailableSpecial Order
FORMING ACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
58
B-6 WELDING COIL TIE
B-7B-22
B-11
2 AND 4 STRUT COIL INSERT (CRIMP)
FLAT WASHERPlate Size 3/4” Hole
Product Code No.
3” x 3” x 1/4” 20.40.83933
3” x 3” x 3/8” 20.40.83833
3” x 4” x 3/8” 20.40.83834
4” x 4” x 3/8” 20.40.83844
4” x 4” x 1/2”
5” x 5” x 3/8” 20.40.83855
5” x 5” x 1/2”
6” x 6” x 3/8”
6” x 6” x 1/2” 20.40.83766
8” x 8” x 5/8” 20.40.83688
Size Wire StrutDiameter
AISI No. ProductCode No.
Wt. Lbs.per 100
1/2” Dia.x 4” .306” 1008 23.0
3/4” Dia.x 6” .375” 1018 54.0
1” Dia. x 8” .440” 1038 100.0
1-1/4” Dia. x 8” .440” 1038 100.0
Other sizes available upon request
Special Order
Special Order
FORMINGACCESSORIES
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
59
COIL ROD
D/R THREADED BAR
COIL NUTS
B-12
B-13
HIGH TENSILE STRENGTH (MINIMUM SAFETY FACTOR 2 TO 1) SEE PRODUCT P-49 FOR LOW TENSILE STRENGTH ROD
HIGH STRENGTH BENDABLE AND WELDABLECONTINUOUS THREAD (2-1/2 THREADS PER INCH)5/8” AND 7/8” INCH DIAMETERS ONLY.
FOR HEAVY COIL HEX NUTS, SEE B-25
Note: Left-handed coil threaded nuts available. Stainless steel Coil Nuts available.
Note: Left-handed coil thread available. 1-1/8” diameter available on request. For lengths less than 12 ft. see D-18. Longer lengths available. 5/8” and 7/8” available on request.
Dia. Stock Length Safe Working Load (Lbs.)
ProductCode No.
Wt. Lbs./Ft.
1/2” 12’ 9,000 20.30.37012 0.530
3/4” 12’ 18,000 20.30.35012 1.150
1” 12’ 38,000 20.30.33012 2.040
1-1/4” 12’ 56,000 20.30.32012 3.480
1-1/2” 12’ 68,000 20.30.31012 6.010
Dia. Stock Length Safe WorkingLoad (Lbs.)
ProductCode No.
WeightLbs./Ft.
5/8” 20’-0” 20,000 20.35.16012 1.00
Wing Nut 20.35.16910
Wing Nut Bracket 20.35.16920
5/8” Cone 20.35.50006
5/8” Coupler
7/8” 20’-0” 32,000 20.35.14012 1.550
Wing Nut 20.35.14910
Wing Nut Bracket 20.35.14920
7/8” Cone 20.35.50004
7/8” Coupler
Dia. Product Code No.
1/2” 20.30.80701
5/8” 20.30.80601
3/4” 20.30.80501
7/8”
1” 20.30.80301
1-1/4” 20.30.80201
1-1/2” 20.30.80101
FORMING ACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
60
B-14 COIL BOLTS
† All 1/2” diameter Coil Bolts less than 6” long have a rated work load of 4,125 lbs.All 1/2” diameter Coil Bolts 6” or longer have a rated work load of 6,750 lbs.
1/2” Diameter (4,125 Lbs.) (6,750 Lbs.) †
Bolt Length Product Code No.
1-1/2”
2” 20.30.47020
2-1/2” 20.30.47025
3” 20.30.47030
3-1/2” 20.30.47035
4”
5”
6”
7”
8”
9”
10” 20.30.47100
11”
12”
13”
14”
15”
16”
17”
18”
3/4” Diameter (9,000 Lbs.)
Bolt Length Product Code No.
2” 20.30.45020
2-1/2” 20.30.45025
3” 20.30.45030
3-1/2” 20.30.45035
4” 20.30.45040
5”
6” 20.30.45060
7”
8”
9”
10”
11”
12” 20.30.45120
13”
14”
15”
16”
17”
18”
1” Diameter (18,000 Lbs.)
Bolt Length Product Code No.
4” 20.30.43040
6” 20.30.43060
8” 20.30.43080
10”
12” 20.30.43120
14”
16”
18”
20” 20.30.43200
24” 20.30.43240
30” 20.30.43300
36” 20.30.43360
48” 20.43480
1-1/4” Diameter (27,000 Lbs.)
Bolt Length Product Code No.
4”
6” 20.30.42060
8”
10”
12”
14”
16”
18”
1-1/2” Diameter (41,250 Lbs.)
Bolt Length Product Code No.
6” 20.30.41060
FORMINGACCESSORIES
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
61
B-14-AADJUSTABLE COIL BOLT
WALE BOLT ASSEMBLY
PLASTIC CONE REMOVAL WRENCH
COIL LOOP INSERT STRAIGHT
B-14-W
B-15
B-16
† Minimum concrete strength of 2,000 psi; Safe Working Loads shown with 4 to 1 safety factor are 1/4 of the approximate ultimate strength based on the mechanical strength of the strut wire and welds.
Dia. Length ProductCode No.
Wt. Lbs.per 100
1/2” 3-1/2” 20.41.17035
1/2” 4” 20.40.17040 18.0
1/2” 6” 20.40.17060 30.2
3/4” 4” 20.41.15040 37.6
3/4” 6” 20.41.15060 39.2
3/4” 9”
1” 4” 20.41.13040
1” 6” 20.40.13060 80.5
1” 8”
Dia. Length Product Code No.
Wt. Lbs.
1/2” 12” 75.0
1/2” 16” 91.8
1/2” 18” 100.0
1/2” 20” 108.2
1/2” 24” 125.0
Dia. Length Product Code No.
Wt. Lbs.per 100
3/4” 12” 148.0
3/4” 16” 186.0
3/4” 18” 205.0
3/4” 20” 224.0
3/4” 24” 262.0
Dia. Product Code No.
Wt. Lbs.per 100
1/2” 173.5
Cone Size Product Code No. Wt. Lbs.
For 1/2” Plastic Cone 1.6 Ea.
For 3/4” Plastic Cone 1.9 Ea.
For 1” Plastic Cone 2.4 Ea.
For 1-1/4” Plastic Cone 3.3 Ea.
Special Order
Special Order
Special Order
FORMING ACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
62
B-17 DOUBLE FLARED COIL LOOP INSERT
B-18 SINGLE FLARED COIL LOOP INSERT
B-20 WALE HOLDER
B-35 Machine Threads available† Minimum concrete strength of 2,000 psi; Safe Working Loads shown with 4 to 1 safety factor are 1/4 the approximate ultimate strength based on the mechanical strength of the strut wire and welds.
B-35 Machine Threads available† Minimum concrete strength of 2,000 psi; Safe Working Loads shown with 4 to 1 safety factor are 1/4 the approximate ultimate strength based on the mechanical strength of the strut wire and welds.
Safe Load Lbs. with4 to1 Safety Factor
Dia. Length ProductCode No.
Wt. Lbs./ Ea.
9,500 1” 12” 2.37
9,500 1-1/4” 12” 2.45
9,500 1-1/2” 12” 2.65
13,500 1” 12” 3.12
13,500 1-1/4” 12” 3.20
13,500 1-1/2” 12” 3.40
Safe Load Lbs.with 4 to 1
Safety Factor
Dia. Length Product Code No. Wt. Lbs./Ea.
2,250 1/2” 4” 0.21
2,250 1/2” 6” 0.25
2,250 1/2” 9” 0.307
2,250 1/2” 12” 0.583
3,750 3/4” 6” 20.41.35060 0.608
3,750 3/4” 9” 20.41.35090 0.790
3,750 3/4” 12” 1.114
4,500 3/4” 9” 1.250
4,500 3/4” 12” 1.521
4,500 1” 6” 20.41.33060 0.520
4,500 1” 9” 20.41.33090 0.675
4,500 1” 12” 20.41.33120 1.200
7,675 1” 12” 1.770
7,675 1-1/4” 12” 20.41.32120 1.850
7,675 1-1/2” 12” 2.050
Size Product Code No.
Wt.Lbs.per 100
1/2” Coil 25.0
3/4” Coil 36.5
Special Order
Special Order
FORMINGACCESSORIES
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
63
B-21
B-25
B-27
B-29B-30
PLY LAG (FOR STEEL-PLY FORMING)
HEAVY COIL HEX NUTS
COIL NUT WASHER
PLASTIC CONES FOR COIL TIES
Overall length of B-29 same as setback.
(1/2” Coil Thread)Dia. Thread Length O.A. Length Product Code No. Wt. Lbs. per 100
1/2” 3” 5-3/4” 24.3
1/2” 3-1/2” 6-1/4” 26.0
1/2” 4” 6-3/4” 28.8
1/2” 4-1/2” 7-1/4” 31.0
1/2” 6” 8-3/4” 37.6
1/2” 7” 9-3/4” 42.0
1/2” 8” 10-3/4” 46.4
1/2” 10” 12-3/4” 55.3
1/2” 12” 14-3/4” 64.0
1/2” 14” 16-3/4” 73.0
Special Order
Dia. Height Product Code No. Wt. Lbs./Ea
1/2” 1-3/16” 0.300
5/8” 1-3/16” 0.265
3/4” 1-3/16” 0.230
1” 2” 0.538
1-1/4” 2-1/2” 1.500
1-1/2” 3-3/8” 3.130
Special Order
Size Washer Dia. Product Code No. Wt. Lbs. per 100
1/2” 4” 20.30.87003 161.4
3/4” 4” 20.30.55003 161.4
7/8” 5” 225.0
1” 5” 225.0
Bolt Dia. Setback B-29: Loose Cone Plastic
Product Code No.
Wt. Lbs.per 100
B-30: Screw-on Cone Plastic
Product Code No.
Wt. Lbs.per 100
1/2” 1” 4.1 4.5
1/2” 1-1/2” 5.1 5.2
1/2” 2” 6.6 6.9
3/4” 1” 6.0 6.6
3/4” 1-1/2” 7.5 9.4
3/4” 2” 9.6 12.3
1” 1” 14.8
1” 2” 16.6
1” 2-1/2” 18.8
1-1/4” 2” 16.6
1-1/4” 2-1/2” 19.8
Special Order
FORMING ACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
64
ROCK ANCHOR (COIL THREAD)
DOUBLE FLARED CRISS CROSSCOIL LOOP INSERT
TOGGLE COIL TIES
HANDLE COIL NUT
B-31
B-33
B-32
B-37
† Minimum concrete strength of 2,000 psi; Safe Working Loads shown with 4 to 1 safety factor are 1/4 of the approximate ultimate strength based on the mechanical strength of the strut wire and welds.
Available only in 1/2” diameter.
Size Hole Dia. Depth Product Code No. Wt. Lbs.per 100
1/2” 1-3/8” 6” 66.8
3/4” 1-5/8” 8” 95.2
1” 1-3/4” 10” 96.6
Size Product Code No.
Wt. Lbs.per 100
1/2” 21.0
3/4” 38.5
1” 77.0
Safe Load Lbs.with 4 to 1
Safety Factor
Dia. Length Plain Product Code No.
Galvanized Product
Code No.
Wt. Lbs.per 100
9,500 1” 12-3/8” 237.0
9,500 1-1/4” 12-3/8” 245.0
9,500 1-1/2” 12-3/8” 266.0
13,500 1” 12-1/2” 312.0
13,500 1-1/4” 12-1/2” 20.41.42125 320.0
13,500 1-1/2” 12-1/2” 20.41.41125 341.0
Special Order
Special Order
Special Order
FORMINGACCESSORIES
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
65
WING NUT (COIL THREAD)
PLASTIC SETBACK PLUG
BATTER WASHER (1/2”, 3/4” & 1”)
TRIPLE FLARED COIL LOOP
B-39
B-40
B-42
B-43
† Minimum concrete strength of 2,000 psi; Safe Working Loads shown with 4 to 1 safety factor are 1/4 of the approximate ultimate strength based on the mechanical strength of the strut wire and welds.
For larger sizes see D-22 Batter Washer
Size Product Code No. Wt. Lbs. per 100
1/2” 20.30.80702 65.0
3/4” 20.30.80502 90.0
7/8” 107.0
1” 20.30.80302 107.0
1-1/8” 114.0
1-1/4” 20.30.80202 122.0
1-1/2” 20.30.80102 286.0
Size Product Code No. Color Wt. Lbs. per 100
1/2” Light Gray 0.94
1/2” Dark Gray 0.94
3/4” Light Gray 1.85
Size Product Code No. Wt. Lbs.per 100
1/2” 100.0
3/4” 250.0
1” 400.0
Safe Load Lbs.With 4 to 1
Safety Factor
Dia. Length Product Code No. Wt. Lbs.per 100
18,000 1-1/4” 12”/15” 450.0
Special Order
Special Order
Special Order
FORMING ACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
66
INSIDE TIE RODD-1D-18
1/2” dia. 6”5/8” dia. 6”3/4” dia. 6”1” dia. 8”
On D-1 Tie Rods, fl ats are the only anti-turn device furnishedMinimum Tie Rod length for fl ats:
D-1 COIL OR NC THREADS ENDS ONLY
D-18 CONTINUOUS COIL THREADS
Product Code No. Product Code No. Product Code No. Product Code No.
Tie Length 1/2” Dia. Heavy(9,000 Lbs)
5/8” Dia. Heavy(12,000 Lbs)
3/4” Dia. Heavy(18,000 Lbs)
1” Dia. Heavy(38,000 Lbs)
6”
7”
8”
9”
10”
11”
12”
13”
14”
15”
16”
17”
18”
Product Code No. Product Code No. Product Code No. Product Code No. Product Code No. Product Code No.
Tie Length 1/2” Dia. Heavy(9,000 Lbs)
5/8” Dia. Heavy(12,000 Lbs)
3/4” Dia. Heavy(18,000 Lbs)
1” Dia. Heavy(38,000 Lbs)
1-1/4” Dia. Heavy(56,000 Lbs)
1-1/2” Dia. Heavy(68,000 Lbs)
6”
8”
10”
12”
14”
15”
16”
18”
20”
22”
24”
30”
36”
Special Order
Longer lengths available upon request.
FORMINGACCESSORIES
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
67
D-1-S
D-1-PA
D-1-JD-1-L
D-1-LA
ANCHOR BOLT
D-1-J BOLT, D-1-L BOLT, D-1-LA BOLT
D-1-J BOLT CLAMP
ANCHOR BOLT SLEEVES
For 3/4” Dia. J-Bolt
Sizes for smooth round bars. When using rebar, increase anchor-bolt sleeve by 1/4”.
D-1-J Bolt1/2” Dia. X 1-1\2” end
Size Product Code No. Wt. Lbs.per 100
2” 20.25.37002 9.0
3” 20.25.37003 13.4
4” 20.25.37004 17.8
6” 20.25.37006 26.6
8” 20.25.37008 35.4
10” 20.25.37010 44.2
12” 20.25.37012 53.0
14” 61.8
18” 79.4
20” 20.25.37020 88.2
D-1-L Bolt1/2” Dia. X 1-1\2” end
Size Product Code No.
3-1/2”
4”
4-1/2”
5”
5-1/2”
6”
6-1/2”
D-1-LA Bolt1/2” Dia. X 1-1\2” end
Size Product Code No. Wt. Lbs.per 100
3-1/2” 22.2
4” 24.4
4-1/2” 26.6
5” 28.8
5-1/2” 31
6” 33.2
6-1/2” 35.4
Product Code No. Wt. Lbs./Ea.
20.20.27010 0.2 Ea.
Bolt Dia. Length Product Code No.
Bolt Dia. Length Product Code No.
1/2” 6” 5/8” 6”
1/2” 8” 5/8” 8”
1/2” 10” 60.25.27010 5/8” 10” 60.25.26010
1/2” 12” 60.25.27012 5/8” 12” 60.25.26012
1/2” 14” 5/8” 14”
1/2” 16” 5/8” 16” 60.25.26016
1/2” 18” 5/8” 18” 60.25.26018
Bolt Diameters Shell Size Product Code No.
Packaging Wt. Lbs. Per Carton
1/2” x 3/4” 2” x 5” 100 Per Ct. 8.0
5/8”, 3/4”, & 7/8” 2” x 7” 100 Per Ct. 10.0
1” & 1-1/4” 3” x 10” 50 Per Ct. 13.0
1-1/2” & 1-3/4” 4” x 15” 20 Per Ct. 12.0
2” & 2-1/4” 4” x 18” 20 Per Ct. 15.0
2-1/2” & 3” 6” x 24” 10 Per Ct. 18.0
4” & 5” 6” x 24” 10 Per Ct. 18.0
Special Order
FORMING ACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
68
D-9
D-4
D-6
D-2 SHE BOLT (OUTSIDE STUD ROD)ACME THREAD
NUT WASHER (ACME)
HEX COUPLING NUT (NC THREADS)
TAPER TIE (COIL)FOR DSI TAPER TIES SEE PAGE 45.
3/4” diameter Acme Thread (external) for 1/2” diameter— Inside Tie Rod with NC threads.She Bolts with coil threads and larger sizes see D-30.West Coast Acme Thread is 5 threads per inch.Caution: Acme Thread pitch varies from region to region.
Caution: Acme Thread pitch varies from region to region.
Longer lengths available. Maximum length 80”.
Dia. Threads Per Inch Overall Length Product Code No.
Wt. Lbs.
3/4” 3-1/3” 20” 20.30.25020 2.0 Ea.
3/4” - 17” 20.30.25017 2.0 Ea.
3/4” - 24” 20.30.25024 2.0 Ea.
Dia. Length Threads Per Inch
Product Code No.
Wt. Lbs./Ea.
3/8” 1-3/4” 16 20.40.68001 11.0
1/2” 1-3/4” 13 20.40.67005 18.1
3/4” 2-1/4” 10 20.40.65001 27.0
7/8” 2-1/2” 9 20.40.64001 42.0
1” 2-3/4” 8 20.40.63005 60.0
Dia. Threads Per Inch Product Code No. Wt. Lbs.
3/4” 3-1/3 Acme 1.3 Ea
West Coast
Dia. Threads Per Inch Product Code No. Wt. Lbs.
1/2” 5 Acme 20.32.57003 1.4 Ea.
3/4” 5 Acme 20.32.55003 1.3 Ea.
3/4” to 1/2” Dia.(7,500 Lbs.)
1” to 3/4” Dia.(18,000 Lbs.)
1-1/4” to 1” Dia.(34,000 Lbs.)
“1-1/2” to 1-1/4” Dia.(50,000 Lbs.)
Tie Length Product Code No. Product Code No. Product Code No. Product Code No.
30”
34” 20.30.16034
36” 20.30.16036
42”
43” 20.30.16043
48” 10.63.12048
52” 20.30.16052
54” 20.30.16054 10.63.12054
60” 20.30.16060
72” 10.63.12072
80” 10.63.12078
FORMINGACCESSORIES
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
69
D-9-AD/R TAPER TIE
D-9-UHS
D-12
D/R TAPER TIEAVAILABLE WITH COIL THREADS ONLY
ROD CLAMP
Sold in full cartons only.
75,000 Lb. Safe Work Load - 1-1/2” Diameter Coil Threads Each EndTaper 1-3/4” - 1-1/2”.
PENCIL ROD
D-12-A
1/4” Dia. Bright Basic, sold in full coils only.1/4” and 3/8” diameter straight lengths available up to 20 ft. long.
Size No. Thread Dia. Taper Length Taper Length Overall Length
Product Code No.
1 5/8” 13/16” to 5/8” 16” 41”
2 5/8” 13/16” to 5/8” 24” 49”
3 5/8” 13/16” to 5/8” 32” 57”
1 5/8” 1” to 5/8” 16” 41”
2 5/8” 1” to 5/8” 24” 49”
3 5/8” 1” to 5/8” 32” 57”
1 7/8” 1-1/4” to 7/8” 16” 42”
2 7/8” 1-1/4” to 7/8” 24” 50”
3 7/8” 1-1/4” to 7/8” 32” 58”
Size No. Rod Dia. Product Code No.
Wt. Lbs.per 100
Clamps Per Carton
1 1/4” 38.2 50
2 3/8” 119.1 50
3 1/2” 202.0 50
Type Product Code No.
1/4” Pencil Rod Coils 20.25.79012
3/8” Pencil Rod Coils 20.25.78012
Special Order
Special Order
Special Order
Special Order
FORMING ACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
70
D-12-S ROD CLAMP (SUPERIOR)
Sold in full cartons only.
FORM CLAMP
TIGHTENING WRENCH
D-12-F
D-14
CLAMPING JACK FOR D-12 FORM CLAMP
Size Product Code No. Wt. Lbs. per 100
For 1/4” and 3/8” Rods 120.0
Size Product Code No. Wt. Lbs.
For 1/4” and 3/8” Rods 8.0 Ea.
Rod Dia. Product Code No.
Wt. Lbs.per 100
Clamps Per Carton
1/4” 20.20.31010 38.2 100
3/8” 20.20.31015 70.6 50
Rod Dia. Product Code No.
Wt. Lbs.
1/4” 20.20.31020 1.3 Ea.
3/8” 1.3 Ea.
1/2” 1.3 Ea.
Special Order
FORMINGACCESSORIES
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
71
D-25D-26
FITTING-UP BOLTS AND NUTS
D-24ADJUSTABLE WELD ANGLE BRACKET
D-22BATTER WASHER
D-21REBAR CLIP AND SPREADER
Pivot Pin furnished with coil thread.Threaded rod not included.
AVAILABLE IN COIL OR NC THREAD
For smaller size see B-42 Batter Washers.
To order: specify rebar diameter, distance between centerline of bar and face of concrete and wall thickness.
Wall Size Product Code No.
Wt. Lbs.per 100
Up to 12” 25.0
Bolt Dia. Product Code No.
Wt. Lbs.
1-1/4-1-3/8” 5.5 Ea.
1-1/2-1-5/8” 5.5 Ea.
Thread Dia. Approx. WorkLoad Lbs.SWL 2 to 1
Bent PlateProduct
Code No.
Pivot PinProduct
Code No.
ClipProduct
Code No.
Wt. Lbs.per 100
1/2” 9,000 320.0
5/8” 12,000 320.0
3/4” 18,000 320.0
7/8” 25,000 320.0
1” 31,500 950.0
1-1/8” 42,500 950.0
Product Dia. Length Product Code No. Wt. Lbs. per 100
D-25 Bolt 9,000 2” 36.0
D-26 Bolt 12,000 - 18.0
Special Order
Special Order
Special Order
Special Order
FORMING ACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
72
D-30-A D/R SHE BOLT
D-30 SHE BOLTFURNISHED WITH COIL THREAD
SWL: Safe working load at 2 to 1 factor of safety
† 5/8” diameter available by special order
She Bolt Dia. Inside Tie Rod Dia.
Approx. Work Load Lbs.
Length Product Code No.
Wt. Lbs.
3/4” 1/2” 8,625 20” 20.30.25020 -
7/8” 1/2” or 5/8” 9,000 or 12,000 18” 3.0
7/8” 1/2” or 5/8” 9,000 or 12,000 20” 3.7
7/8” 1/2” or 5/8” 9,000 or 12,000 24” 4.0
1” 5/8” 12,000 - -
1-1/8” 3/4” 18,000 - -
1-1/4” 3/4” 18,000 20” 20.30.22020 5.6
1-1/4” 3/4” 18,000 24” 20.30.22024 7.0
1-1/4” 3/4” 18,000 30” 20.30.22030 9.1
1-1/4” 3/4” 18,000 35” 11.8
1-3/8” 7/8” or 1” 31,000 or 33,750 - -
1-1/2” 1” 37,500 20” 8.3
1-1/2” 1” 37,500 24” 10.2
1-1/2” 1” 37,500 30” 13.2
1-1/2” 1” 37,500 35” 15.6
1-5/8” 1-1/8” or 1-1/4” 44,750 or 45,500 - -
Approx. Working Load Lbs.
Dia. Length Product Code No.
Wt. Lbs.
18,000 5/8” 18” 4.9
5/8” 20”
18,000 5/8” 24” 7.0
5/8” 30”
32,000 7/8” 18” 7.2
7/8” 20”
32,000 7/8” 24” 10.2
7/8” 30”
Special Order
FORMINGACCESSORIES
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
73
D-49MAGNA JAW
D-40HE-BOLT
U.S. Patent No. 4,880,245
Size
1-1/4” to 1”
1-1/2 “ to 1-1/4”
Product Code No. Wt. Lbs.
8.0 Ea.
Special Order
D-32CLOSED COUPLERThread Rod Dia. Length Product Code No. Wt. Lbs.
1/2” 2-1/2” 20.30.80705 0.2 Ea.
3/4” 3” 20.30.80505 0.4 Ea.
7/8” 4” 0.9 Ea.
1” 4-1/2” 20.30.80305 2.1 Ea.
1-1/4” 5-1/2” 20.30.80205 2.8 Ea.
1-1/2” 7” 4.1 Ea.
Special Order
FORMING ACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
74
D-64 SUPERTIE SPREADER CLIP
D-61D-69
SUPERTIE WEDGE
D-62D-68
SUPERTIE FIBERGLASS ROD
D-63D-70
SUPERTIE WATERSTOP
D-60D-67
SUPERTIE GRIPPER
Available in full cartons onlyTo be used with SuperTie Rod only
Available in full cartons onlyTo be used with SuperTie Rod only
Available in full bundles only
Available in full cartons onlyTo be used with SuperTie Rod only
Available in full cartons onlyTo be used with SuperTie Rod only
FOR FIBERGLASS ROD
FOR FIBERGLASS ROD
FOR FIBERGLASS ROD
FOR FIBERGLASS ROD
Type Dia. Product Code No. Wt. Lbs. Packaging
D-60-G6000 0.306 20.20.33011 46.0 per pail 100 per pail
D-67-G15000 0.500 20.20.33005 52.0 per pail 50 per pail
Type Product Code No. Wt. Lbs. Packaging Fits Rod
D-61-H6000 20.20.33060 27.0 per carton 100 per carton 0.306
D-69-H15000 30.0 per carton 50 per carton 0.500
Type Standard Dia. x Length
Product Code No. Wt. Lbs. Packaging
D-62 - R6/12G .306 x 12 ft. 20.25.68012 36.0 per bundle 600 ft. per bundle
D-62-R6/20G .306 x 20 ft. 20.25.68020 60.0 per bundle 1000 ft. per bundle
D-68-R15/20G .500 x 20ft. 20.25.67020 62.0 per bundle 360 ft. per bundle
Type Product Code No. Wt. Lbs. Packaging
D-63-WS 6000 6.0 per carton 1,000 per carton
D-70- WS15000 8.0 per carton 1,000 per carton
Type Product Code No. Wt. Lbs. Packaging
SC6000 20.20.33200 5.0 per carton 1,000 per carton
Special Order
FORMINGACCESSORIES
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
75
F-4-TSCREW ANCHOR SETTING BOLT TEMPLATE
F-4SCREW ANCHOR SETTING BOLT
F-3SCREW ANCHOR EYE BOLTS
F-1SCREW ANCHORS
F-2SCREW ANCHOR BOLTS
USE ONLY WITH F-1 ANCHORSEYE NUT WELDED TO ROD
USE ONLY WITH F-1 ANCHORS
Dia. Length PlainProduct
Code No.
Galvanized Product
Code No.
Wt. Lbs.per 100
3/4” 4” 23.8
1” 6” 54.0
1-1/4” 7” 80.6
1-1/2” 8” 89.4
2” 13” -
Dia. Length PlainProduct
Code No.
Galvanized Product
Code No.
Wt. Lbs.
3/4” 9” 121.0
1” 12” 261.0
1-1/4” 16” 565.0
1-1/2” 18” 954.0
1-3/4” and 2” - -
Dia. Length Product Code No.
Wt. Lbsper 100
Ea. 1” Add Wt. Lbs.
3/4” 7” 155.0 12.5
1” 9” 376.0 22.3
1-1/4” 12” 757.0 35.0
1-1/2” 14” 1331.0 50.0
CUSTOM FABRICATED PRODUCT
CUSTOM FABRICATED PRODUCT
Special Order
Special Order
FORMING ACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
76
SHELF ANGLE INSERTF-7
ASKEW HEAD BOLTS
F-5 THREADED INSERTS
NUTS AND CUT WASHERS
Also see F-42, F-43 and F-44
NC Threads
Bolt Dia. Type Product Code No. Wt. Lbs.per 100
1/2’ 13NC 35.0
5/8” 11NC 60.0
3/4” 10NC 51.3
7/8” 9NC 90.0
Also available electro galvanized.
Bolt Dia. Type Plain Product Code No.
Galvanized Product Code No.
Wt. Lbs.per 100
3/4” F-7 108.0
3/4” F-7-L 229.0
Bolt Dia. Length Plain Product Code No.
Galvanized Product Code No.
Wt. Lbs.per 100
3/4” 1-1/2” 25.0
3/4” 2” 31.0
3/4” 2-1/2” 37.0
3/4” 3” 43.0
Bolt Dia. Type Plain Product Code No.
Galvanized Product Code No.
Wt. Lbs.per 100
3/4” Nut 11.9
3/4” Washer 10.3
Special Order
Special Order
FORMINGACCESSORIES
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
77
F-16REGLET
F-17DOVETAIL ANCHOR SLOT
F-21DOVETAIL
F-34CORRUGATED WALL TIE
For Cushion-Lock and Gasket-Lock Reglets see F-100 thru F-122
Available only in bundles of 200 ft.
Available only in bundles of 250 ft.
Type Product Code No.
Wt. Lbs.per 100 ft.
Quantity per skid
Galvanized Filled 40.0 6,000 ft.
Galvanized Open 37.0 6,000 ft.
Size Product Code No.
Wt. Lbs.per 100 ft.
Quantity per skid
100 ft. 30.0 6,000 ft.
Product Size Length From Face of Concrete
F-21 Dovetail 16 ga. 3-1/2”
Corrugated Brick Anchor 5-1/2”
Product Size Length From Face of Concrete
Product Code No.
F-34 Corrugated Wall Tie 26 ga. 7/8” 7”
F-34 Corrugated Wall Tie 16 ga. 7/8” 7”
Special Order
Special Order
Special Order
Special Order
FORMING ACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
78
WALL PLUGF-37
LOOP FERRULE INSERTF-42
THIN SLAB FERRULE INSERTF-44
CAP PLUGF-45
Minimum order of 500 pieces.
NC THREADS
† Type 304 stainless steel
FOR USE WITH FERRULE INSERT
NC THREADS
Size & Type Product Code No. Wt. Lbs. per 100
26 ga. Galv. Stock 2” wide 5.0
Bolt Dia. Thread Type Plain Product
Code No.
Galvanized Product
Code No.
Stainless Steel Product
Code No.
Wt. Lbs.per 100
1/4” 20 NC 13.5
3/8” 16 NC 20.42.10008 20.42.11008 14.9
1/2” 13 NC 20.42.10007 20.42.11007 20.5
5/8” 11 NC 20.42.10006 33.5
3/4” 10 NC 20.42.10005 20.42.11005 37.5
7/8” 9 NC 47.5
1” 8 NC 57.0
Bolt Dia. Thread Type Plain Product
Code No.
Galvanized Product
Code No.
Stainless Steel Product
Code No.
Wt. Lbs.per 100
1/4” 20 NC 16.9
3/8” 16 NC 20.42.30008 18.3
1/2” 13 NC 20.42.30007 20.42.31007 19.4
5/8” 11 NC 20.42.30006 40.6
3/4” 10 NC 50.0
7/8” 9 NC 60.0
1” 8 NC 70.0
Bolt Dia. Product Code No.
Wt. Lbs.per 100
3/8” 0.2
1/2” 0.2
5/8” 0.3
3/4” 0.4
1” 0.8
1-1/4” 1.0
Special Order
Special Order
FORMINGACCESSORIES
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
79
DOUBLE FLARED LOOP INSERT F-47
COIL ROD WELDED TO EYE NUT
EYE NUT F-48
EYE BOLT F-49
SHOULDER EYE BOLT F-49-ACOIL THREADS WITH FORGED HEAD
Normally furnished with coil thread;can be furnished with National Coarse Thread.
Dia. NC Threads Product Code No.
Coil Threads Product Code No.
Wt. Lbs.
1/2” 0.7 Ea.
3/4” 20.30.80506 1.2 Ea.
1” 20.30.80306 2.8 Ea.
1-1/4” 6.0 Ea.
1-1/2” 6.0 Ea.
Dia. Height Plain Product Code No.
Galvanized Product Code No.
Wt. Lbs.per 100
3/4” 2-3/4” 32.6
Bolt Dia. Bolt Length Product Code No. Wt. Lbs.
1/2” 2-1/2” 20.30.57025 0.8 Ea.
3/4” 3” 20.30.55030 1.3 Ea.
1” 3-1/2” 20.30.53035 3.7 Ea.
1-1/4” 4” 4.7 Ea.
1-1/2” 6” 9.3 Ea.
Bolt Dia. Bolt Length Product Code No. Wt. Lbs.
3/4” 3-1/2” 20.30.55135 1.2 Ea.
1” 3-1/2” 20.30.53135 3.0 Ea.
Special Order
Special Order
FORMING ACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
80
“L” LEG (THIN SLAB) COIL INSERTF-534-STRUT WITH COIL
ROCKET/KOHLER FERRULE INSERTF-50
“L” LEG (THIN SLAB) FERRULE INSERTF-524-STRUT WITH COIL
Bolt Dia. Thread Type Product Code No.
Wt. Lbs.per 100
1/2” 13 NC 30.0
5/8” 11 NC 47.0
3/4” 10 NC 66.0
7/8” 9 NC 96.0
1” 8 NC 125.0
1-1/8” 7 NC 145.0
1-1/4” 7 NC 165.0
Bolt Dia. Height Plain Product Code No.
Galvanized Product Code No.
Wt. Lbs.per 100
3/4” - 10 NC 3-1/8” 71.0
1” - 8 NC 4-1/8” 99.0
Bolt Dia. Height Plain Product Code No.
Galvanized Product Code No.
Wt. Lbs.per 100
3/4” 3” 67.0
3/4” 5” 20.41.55150
1” 3-1/2” 20.41.53035
1” 4” 20.41.53040 103.0
1” 5-1/2” 20.41.53155
1-1/4” 4” 121.0
1-1/2” 4” 139.0
Special Order
Special Order
FORMINGACCESSORIES
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
81
DUCTILE EMBED (SAE) F-54
RAIL FASTENER EMBED (RT-SAE)
EXPANDED COIL INSERT
F-54-RT
F-56F-57F-58F-59F-60F-61
FOR DB-SAE-3 EMBED SEE D-108-A
- CUSTOM FABRICATED PRODUCT
- CUSTOM FABRICATED PRODUCT
Note: For Safe Working Loads please contact an Atlas Representative.F-57 - 5/8” and 7/8” available upon request.F-57 With Washer- 1/2”, 5/8” and 7/8” available upon request.F-57, F-59, and F-61 available in stainless steel.
Type Dia. Threads Insert Length
No. of Struts
Plain Product Code No.
Galvanized Product
Code No.
Wt. Lbs.
F-56 3/4” Coil 4-1/2” 2 55.0
F-57 3/4” NC 4-5/8” 2 20.42.75045 20.42.75145 55.0
F-56 1” Coil 5-1/2” 2 112.0
F-57 1” NC 5-5/8” 2 117.0
F-58 1” Coil 5-1/2” 4 163.0
F-59 1” NC 5-5/8” 4 168.0
F-58 1-1/4” Coil 7-1/2” 4 240.0
F-59 1-1/4” NC 7-5/8” 4 315.0
F-60 1-1/2” Coil 9-1/2” 6 420.0
F-61 1-1/2” NC 9-5/8” 6 490.0
FORMING ACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
82
FLARED THIN SLAB INSERT (FERRULE)F-62WING NUT TYPE- NC THREADS
FLARED THIN SLAB INSERT (COIL)F-63WING NUT TYPE
Note: For Safe Working Loads please contact an Atlas Representative.
Note: For Safe Working Loads please contact an Atlas Representative.Available with mounting washer.
FERRULE LOOP INSERTF-64NC THREAD
-Type 304 Stainless Steel. Available with mounting washer.
Bolt Dia. Thread Type
Height “E” Plain Product Code No.
Galvanized Product Code No.
Wt. Lbs.per 100
1/2” 13 NC 1-3/4” 4-1/2” 25.0
5/8” 11 NC 2-7/16” 4-7/8” 44.0
3/4” 10 NC 2-7/16” 4-7/8” 48.0
3/4” 10 NC 3-5/8” 4-7/8” 66.0
1” 8 NC 2-7/16” 5-1/8” 86.0
1” 8 NC 4-5/8” 5-1/8” 106.0
Bolt Dia. Height “E” Plain Product Code No.
Galvanized Product Code No.
Wt. Lbs.per 100
1/2” 1-3/4” 4-1/8” 20.41.67015 28.0
3/4” 2-5/16” 4-7/8” 20.41.65025 56.1
3/4” 3-1/2” 4-7/8” 20.41.65035 67.0
1” 2-5/16” 5-1/4” 20.41.63025 78.8
1” 4-1/2” 5-1/4” 20.41.63045 20.41.63145 97.0
Bolt Dia. Thread Type Length Plain Product Code No.
Galvanized Product
Code No.
Stainless Steel Product
Code No.
Wt. Lbs.per 100
1/2” 13 NC 4-1/8” 24.7
1/2” 13 NC 6-1/8” 37.7
5/8” 11 NC 4-1/8” 34.7
5/8” 11 NC 6-1/8” 20.42.56006 47.7
3/4” 10 NC 4-1/8” 20.42.55040 53.8
3/4” 10 NC 6-1/8” 20.42.55060 66.8
7/8” 9 NC 6-1/8” 74.8
1” 8 NC 6-1/8” 20.42.53060 74.8
1” 8 NC 6-1/8” 102.3
Special Order
FORMINGACCESSORIES
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
83
F-72
F-65-W
F-65TYPE L INSERTS
TYPE L INSERTS WITH MOUNTING WASHER
THREADED STEEL SETTING PLUGS
2-STRUT WITH COIL
2-STRUT WITH FERRULE
2-STRUT WITH COIL
2-STRUT WITH FERRULE
NC THREADS
Open end Ferrule availableAvailable in Stainless Steel and electro-galvanized.
Open end Ferrule availableAvailable in Stainless Steel and electro-galvanized
Type Dia. Product Code No. Wt. Lbs. per 100
L 1/2” 19.0
L 3/4” 24.0
Type Dia. Product Code No. Wt. Lbs. per 100
LF 1/2” 26.0
LF 5/8” 40.0
LF 3/4” 61.0
LF 1” 64.0
Type Dia. Product Code No. Wt. Lbs. per 100
LW 1/2” 24.0
LW 3/4” 35.0
Type Dia. Product Code No. Wt. Lbs. per 100
LF-W 1/2” 34.0
LF-W 5/8” 55.0
LF-W 3/4” 80.0
Dia. Thread Type Product Code No. Wt. Lbs. per 100
3/8” 16 NC 0.9
1/2” 13 NC 1.1
5/8” 11 NC 1.8
3/4” 10 NC 3.3
1” 8 NC 7.6
Special Order
Special Order
Special Order
FORMING ACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
84
FERRULE INSTEAD OF A COILF-73
THREADED PLASTIC PLUGF-74NC THREADS
Ferrules with closed bottom and National Coarse Threads can be supplied instead of a coil.
TYPE B-4 CUSHION-LOCK REGLETF-105
Available only in full boxes of 200 ft. in 10 ft. lengths.Each box of Type B-4 Reglet includes 24 connector plugs andinstallation instructions with template pattern.Cushion-Lock Reglets are protected by U.S. Patent Numbers3,241,271 - 3,246,433 - 3,319,384- 3,981,108 - 3,974,619.
Bolt Dia. Wt. Lbs.
1/2” 7.5 per 100 ferrules
5/8” 15.0 per 100 ferrules
3/4” 18.5 per 100 ferrules
7/8” 40.0 per 100 ferrules
1” 39.0 per 100 ferrules
1-1/4” 75.0 per 100 ferrules
Size Thread Type Product Code No. Wt. Lbs.per 100
3/8” 16 NC 20.28.21010 0.5
1/2” 13 NC 20.28.21020 0.6
5/8” 11 NC 20.28.21030 0.8
3/4” 10 NC 20.28.21040 1.0
7/8” 9 NC 20.28.21050 1.7
1” 8 NC 20.28.21060 2.0
Product Code No. Wt. Lbs.
37.0 per box
Special Order
Special Order
FORMINGACCESSORIES
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
85
H-3BEAM CLIP
FOR PLYWOOD FORMSH-5PLASTIC PLUG
H-6FORM PATCH
Available only in full cartons
Available only in full cartons of 500 pieces
Slot Size Type Gauge Product Code No. Wt. Lbs. per 100
7/16” A 16 ga. Galv. 12.8
3/16” B 16 ga. Galv 13.1
Size Product Code No. Wt. Lbs. Per Carton Packaging
9/16” 20.28.10010 4.0 1,000 per carton
13/16” 20.28.10020 7.0 1,000 per carton
Size & Type Product Code No. Wt. Lbs. Per Carton Packaging
1-3/4” dia. Galv. Stock 20.28.11175 20.0 1,000 per carton
2-1/4” dia. Galv. Stock 20.28.11225 27.0 1,000 per carton
2-3/4” dia. Galv. Stock 20.28.11275 33.0 1,000 per carton
Special Order
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
86
• Form Release Agents
• Curing Compounds
• Concrete Sealers
• Bondbreakers for Tilt-Up
• Liquid Bonding Agents
• Epoxy Bonding Agents
• Epoxy Injection Resins
• Grouts
• Patching & Repair Mortars
• overlays & deck sealers
• Self-Leveling Underlayments
• Shake-on Floor Hardeners
QualityProven Performance
ConsistentService
AvailabilityTechnical Support
TrustQuality Concrete Construction Chemicals
& Restoration Products
All Atlas Tech Products areconveniently stocked at allAtlas Construction Supply
locations!
Treat your concrete toTech Products.
Concrete Chemicals, Epoxies& Cementitious Materials
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
87
DescriptionAtlas Release is an extremely effective, chemically reactive form release agent that prevents concrete from bonding to formwork and leaves clean, smooth, hard and consistent concrete surfaces. The organic compounds in Atlas Release react with the alkali content of concrete to produce a slick release and allow for quick and easy removal of concrete formwork. The resulting concrete surface is stain-free and ready to accept curing compounds, sealers, paint or other architectural treatments.
Uses• May be used on many types of concrete forms, such as wood, steel, aluminum, fi berglass, plastic, paper, epoxy or urethane coated molds, masonite and formliners. • Treat wood and steel forms to increase the useable life of form surfaces.• Spray on equipment such as mixers, pavers, trucks, fi nishing machines, etc. for easy clean-up and maintenance.
Features of Atlas Release• Provides a quick and easy release of concrete forms.• Will not stain or discolor concrete surfaces.• Produces a smooth concrete surface with minimal to no bugholes or surface dusting.• Excellent for exposed architectural concrete, and cost effective for all concrete forming applications.• Signifi cantly reduces form clean-up time between pours.• Contains a wood preservative to provide at least twice the form life of untreated wood.• Contains rust inhibitors to protect steel forms.• Leaves no residue on concrete. Will not affect the adhesion of curing compounds, sealers, paints, caulking or other architectural treatments.• Easy to work with, pleasant scent.• Does not contain diesel oil, kerosene, waxes, silicones or carcinogenic compounds.• Once dry, it will not wash-off if exposed to light rain.• Can be applied in subfreezing or extremely hot temperatures.
Technical Data & Specifi cationsCorps of Engineers CEGS 03300 Section 10.8Navy Dock and Piers 56359VOC Compliant
CoverageUntreated Plywood: 700 - 1,200 ft2 per gal.BB Grade Plyform: 1,200 ft2 per gal.MDO: 1,200 - 1,500 ft2 per gal.HDO: 2,000 ft2 per gal.Steel, Aluminum, Fiberglass: 2,000 - 2,500 ft2 per gal.
Atlas Fog Spray TipThis valuable spray tip increasescoverage rates up to 400% overstandard fan-type spray tips.Saves material costs and producesa great concrete fi nish!
ATLAS RELEASEChemically Reactive Form Release Agent
The best value form release agent anywhere!
Atlas Release used for over 500,000 sq. ft. of architectural walls on the Cathedral of Our Lady of the Angels in
Los Angeles, CA.
Form Release Agents
Packaging Product Code
5 gallon pails 30.10.10025
55 gallon drums 30.10.10035
275 gallon totes 30.10.10045
Atlas Release Competitor Release
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
88
DescriptionAtlas Bio-Guard is a premium, environmentally safe, chemically reactive form release agent for use on many different types of concrete forms. A natural emulsifi ed organic vegetable oil, Bio-Guard is biodegradable and is ideal for use in environmentally sensitive areas, concrete precast plants, or wherever architectural concrete surfaces are required. Bio-Guard provides easy form stripping, produces concrete surfaces that are stain-free, smooth & non-dusting, and minimizes form clean-up time and maintenance costs.
ATLAS BIO-GUARD Uses• Ideal for environmentally sensitive projects, such as bridge work over rivers & streams, potable water reservoirs, or jobsites where spillage or run-off is a concern. • May be used on many types of concrete forms for architectural concrete, such as wood, steel, aluminum, fi berglass, plastic, paper, epoxy or urethane coated molds, masonite, formliners and expanded polystyrene.• Excellent with most elastomeric and PVC formliners.• Spray on equipment such as mixers, pavers, fi nishing machines, etc. for easy clean-up and maintenance.Features of Atlas Bio-Guard• 100% natural organic chemical release agent that is biodegradable and environmentally safe.• Reduces risk of expensive clean-up.• Non-staining release for architectural concrete.• Helps prevent bugholes and surface dusting.• Leaves no residue on concrete after forms are stripped.• Easy to work with, odorless. Does not contain diesel oil, kerosene, waxes, silicones or carcinogenic compounds.• Once dry, it will not wash-off if exposed to light rain.• GreenSpec® Listed for LEED® projects and certified to meet NSF Standard 61 requirements for potable water projects. CoverageUntreated Plywood: 500 - 1,000 ft2 per gal.MDO: 1,000 - 1,200 ft2 per gal.HDO: 1,500 ft2 per gal.Steel, Aluminum, Fiberglass: 1,500 - 2,000 ft2 per gal.
Water-Based, Biodegradable Form Release Agent
ATLAS PREMIUM GOLD RELEASE
DescriptionAtlas Premium Gold Release is a high performance, chemically reactive form release agent that is ideal for high visual impact precast and architectural concrete. Premium Gold Release provides easy removal of many types of concrete forms and leaves a stain-free concrete surface that is smooth, hard, and ready to accept further treatments. Premium Gold Release produces beautiful clean concrete surfaces and helps eliminate bugholes & surface dusting.
Uses• Ideal for high visual impact precast and architectural concrete.• May be used on many types of concrete forms, such as wood, steel, aluminum, fi berglass, plastic, paper, epoxy or urethane coated molds, masonite and formliners.• Compatible with most elastomeric and PVC formliners.• Treat wood and steel forms to increase the useable life of form surfaces.
Chemically Reactive Form Release Agent ForArchitectural Concrete
Features of Atlas Premium Gold Release• Will produce a smooth, clean and stain-free concrete surface for architectural and precast concrete.• Reduces form clean-up time and cost by more than 50%.• Contains a wood preservative that increases life of wood formwork - Prevents forms from absorbing the alkali water in the concrete to keep forms smooth, hard and intact.• Safeguards steel forms to allow for easy cleaning and protection of form faces in between pours.• Unequaled for preventing bugholes and surface dusting on the concrete surface.• Leaves no residue on concrete. Will not affect the adhesion of curing compounds, sealers, paints, etc.
CoverageUntreated Plywood: 800 - 1,200 ft2 per gal.MDO: 1,500 - 2,000 ft2 per gal.HDO: 2,500 ft2 per gal.Steel, Aluminum, Fiberglass: 2,500 - 3,000 ft2 per gal.
Read Product Data Sheet & MSDS prior to use.
Atlas Bio-Guard performs with urethane formliners!
Read Product Data Sheet and MSDS prior to use.
Form Release Agents
Packaging Product Code
5 gallon pails 30.10.10525
55 gallon drums 30.10.10535
275 gallon totes 30.10.10545
Packaging Product Code
5 gallon pails 30.10.11025
55 gallon drums 30.10.11035
275 gallon totes 30.10.11045
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
89
DescriptionAtlas Quantum-CureTM is a clear, water-based concrete curing compound that is formulated to ensure proper concrete strength development, prevent shrinkage cracks, and leave a bondable surface for further coatings, treatments or fl ooring. This ready-to-use, non-staining, membrane-forming cure is formulated to control moisture retention in freshly placed concrete for proper cement hydration. Quantum-CureTM does not need to be removed prior to the application of subsequent seal-ers, paints, adhesives, fl ooring materials, waterproofi ng, etc. Quantum-CureTM provides contractors, architects, engineers and owners a simple solution to compatibility and discoloration issues. Available in a NSF Standard 61 formulation for potable water projects.
Uses• Concrete fl oors, decks, walls, columns, beams, sidewalks, driveways, architectural concrete, etc.• Interior and exterior applications.• Ideal for schools, hospitals, condominiums, offi ce buildings, parking garages, warehouses, manufacturing facilities, food processing plants, stadiums, house foundations, etc.• NSF formulation for potable water projects, and GreenSpec® listed for LEED® projects.
Features of Atlas Quantum-CureTM
• Membrane-forming to control moisture retention for proper cement hydration.• Helps concrete reach maximum strength.• Helps prevent plastic shrinkage cracks.• Compatible with subsequent treatments, coatings and fl ooring, such as Atlas Tech sealers, paints, water- proofi ng, tile, carpet adhesives, cement-based mortars, or other architectural coatings. • Non-staining formulation maintains natural look of concrete.• Increases abrasion and impact resistance of concrete surface.• Water-based formulation; meets most stringent VOC regulations.• Fast drying.• Will not yellow, even if exposed to sunlight.• Does not contain any waxes, silicones or paraffi ns.• Does not contain any fl ammable or combustible solvents.• Pleasant scent.• Ready-to-use and easy to spray; no clogged sprayers.• Easily clean equipment with water after use.
ATLAS QUANTUM CURETM
Non-Staining, Membrane-Forming Concrete Curing Compound that isCompatible with Subsequent Concrete Treatments & Flooring.
Moisture Loss of Concrete Curing Compounds(Applied @ 200 sq. ft. / gal.; measured 72 hours after application)
0.00
0.20
0.40
0.60
0.80
1.00
1.20
1.40
1.60
1.80
Acrylic -30%
Resin -White Pig.
Acrylic -19%
Acrylic -14%
Resin Quantum-Cure
SodiumSilicate
Curing Compound
Moi
stur
e Lo
ss(
kg /
sq. M
)
Moisture Loss ASTM C-309 .55 kg / sq. M
Atlas Quantum-CureTM used on exposed walls and walls to be covered at the Griffi th Park Observatory in
Los Angeles, CA.
This cure belongs on every concrete job!
CoverageBroom Finish: 200 - 400 ft2 per gal.Smooth Finish: 400 - 600 ft2 per gal.Vertical Surface: 400 - 500 ft2 per gal.
The chart below shows the comparison of Atlas Quantum-CureTM with other types of concrete curing compounds. Atlas Quantum-CureTM has similiar moisture retention of resin cures, but offers the important benefi ts of non-staining & compatibility with subsequent concrete treatments.
Read Product Data Sheet & MSDS prior to use.
Concrete CuringCompounds
Packaging Product Code Product Code
5 gallon pails 30.11.11025 30.11.11125
55 gallon drums 30.11.11035 30.11.11135
275 gallon totes 30.11.11045
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
90
DescriptionAtlas Res-Cure is an emulsifi ed resin curing compound for use on interior, exterior, horizontal and vertical concrete surfaces. This ready-to-use membrane-forming cure is formulated to control moisture retention in freshly placed concrete for proper cement hydration. Res-Cure provides excellent early curing properties and will begin to dissipate approximately 28 - 40 days after application. Once the resin is completely dissipated, the concrete surface is suitable for application of subsequent sealers, paints, adhesives, fl ooring materials, waterproofi ng, etc.
Atlas Res-Cure is available in many DOT approved formulations, including Caltrans, Nevada, Arizona and Colorado. Ask your Atlas representative for further information.
ATLAS RES-CURE Features of Atlas Res-Cure• Membrane-forming to control moisture retention for proper cement hydration.• Ready-to-use and easy to spray-apply.• After fi lm dissipates, concrete surface is suitable for application of subsequent treatments and fl ooring.• Water-based formulation; meets most stringent VOC regulations.• Fast drying.• Low odor.• Available with a red fugitive dye for ease of application.Technical Data & Specifi cationsASTM C-309, Type 1 & 1D, Class A & BAASHTO M-148, Type 1 & 1D, Class A & BVOC CompliantTypical coverage rate: 200 ft2 per gal.
Clear, Water-Based, Dissipating Resin Curing Compound
DescriptionAtlas Res-Cure White is a white-pigmented, emulsifi ed resin curing compound for use on exterior, horizontal and vertical concrete surfaces. This ready-to-use membrane-forming cure is formulated to control moisture retention in freshly placed concrete for proper cement hydration. Res-Cure White provides excellent early curing properties; the white pigment keeps the concrete surface cooler and helps prevent thermal cracking. Ideal for concrete highways, airport runways, bridges, street & curb paving, sidewalks, canals, dams, etc.
Atlas Res-Cure White is available in many DOT approved formulations, including Caltrans, Nevada, Arizona and Colorado. Ask your Atlas representative for further information.
ATLAS RES-CUREWHITE
Features of Atlas Res-Cure White• White pigmentation keeps concrete surfaces cooler and helps prevent thermal cracking.• Membrane-forming to control moisture retention for proper cement hydration.• Helps produce harder and more dense concrete surfaces while increasing resistance to cracking, dusting, and chemical attack.• Ready-to-use and easy to spray-apply.• Water-based formulation; meets most stringent VOC regulations.• Fast drying.• Low odor.
Technical Data & Specifi cationsASTM C-309, Type 2, Class A & BAASHTO M-148, Type 2, Class A & BVOC CompliantTypical coverage rate: 200 ft2 per gal.
Read Product Data Sheet & MSDS prior to use.
White Pigmented, Water-Based, Resin Curing Compound
DescriptionAtlas Clear Cure Wax is a water emulsifi ed wax curing compound for freshly poured concrete surfaces. This high solids formulation controls water retention during the curing period to help produce strong and durable con-crete and help prevent plastic shrinkage cracks & surface dusting. Atlas Clear Cure Wax is ideal for concrete highways, airport runways, residential paving, canals, dams, etc. Atlas Clear Cure Wax is available in many DOT approved formulations, including Caltrans, Nevada, Arizona and Colorado. Ask your Atlas representative for further information.
ATLAS CLEAR CURE WAX Features of Atlas Clear Cure Wax• Membrane-forming to control moisture retention for proper cement hydration.• Ready-to-use and easy to spray-apply.• Economical, low odor, fast drying, & dries clear.
Technical Data & Specifi cationsASTM C-309, Type 1 & 1D, Class AAASHTO M-148, Type 1 & 1D, Class AVOC CompliantTypical coverage rate: 200 ft2 per gal.
Clear, Water-Based, Wax Curing Compound
Read Product Data Sheet & MSDS prior to use.
Concrete CuringCompounds
Packaging Product Code
5 gallon pails 30.11.11525
55 gallon drums 30.11.11535
275 gallon totes 30.11.11545
Packaging Product Code
5 gallon pails 30.11.12025
55 gallon drums 30.11.12035
275 gallon totes 30.11.12045
Packaging Product Code
5 gallon pails
55 gallon drums 30.11.12535
275 gallon totes
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
91
DescriptionAtlas Whix Cure is a water emulsifi ed white wax curing compound for application on freshly placed concrete surfaces. Atlas Whix Cure forms a vapor sealing membrane to control moisture retention and produce strong and durable concrete. The white pigmentation in Atlas Whix Cure provides good refl ective protection for exterior concrete which is important for applications that are subject to high temperatures caused by exposure to direct sunlight. Ideal for concrete highways, airport runways, bridges, street & curb paving, sidewalks, canals, dams, etc.
Atlas Whix Cure is available in many DOT approved formulations, including Caltrans, Nevada, Arizona and Colorado. Ask your Atlas representative for further information.
Features of Atlas Whix Cure• White pigmentation keeps concrete surfaces cooler and helps prevent thermal cracking.• Membrane-forming to control moisture retention for proper cement hydration.• Helps produce harder and more dense concrete surfaces while increasing resistance to cracking, dusting, and chemical attack.• Ready-to-use and easy to spray-apply.• Water-based formulation; meets most stringent VOC regulations.• Fast drying & low odor.
Technical Data & Specifi cationsASTM C-309, Type 2, Class AAASHTO M-148, Type 2, Class AVOC CompliantTypical coverage rate: 200 ft2 per gal.
ATLAS WHIX CUREWhite Pigmented, Water-Based, Wax Curing Compound
Read Product Data Sheet & MSDS prior to use.
Features of Atlas Cure & Hard• Retains natural look of concrete.• Compatible with subsequent treatments and coatings.• Water-based formulation; meets most stringent VOC regulations.• Economical. Technical Data & Specifi cationsUSDA ApprovedVOC CompliantTypical coverage rate: 200 ft2 per gal.
DescriptionAtlas Cure & Hard is a clear, odorless, water-based, general purpose concrete curing compound. This economical cure is a reactive blend of silicates that will penetrate the concrete surface to provide adequate hydration, prevent surface dusting, and increase the density of the concrete. Cure & Hard leaves no residue on the concrete and provides a bondable surface for subsequent treatments and coatings.
ATLAS CURE & HARDClear, Penetrating, Water-Based Curing Compound
Read Product Data Sheet & MSDS prior to use.
Concrete CuringCompounds
Packaging Product Code
5 gallon pails 30.11.13025
55 gallon drums 30.11.13035
275 gallon totes 30.11.13045
Packaging Product Code
5 gallon pails 30.11.14025
55 gallon drums 30.11.14035
275 gallon totes
DescriptionAtlas Finish-Film is a water-based evaporation retarder for use on freshly placed concrete fl atwork. Finish-Film produces a monomolecular fi lm on the concrete surface to prevent rapid moisture loss and allow for proper fi nishing. Finish-Film is especially benefi cial during rapid-drying conditions and will help prevent plastic shrinkage cracking.
Uses• During fi nishing of concrete fl atwork when rapid-drying conditions exist (high ambient temperatures, high winds, direct sunlight, low humidity, low water-cement ratio concrete mixes). • May be used with shake-on fl oor hardeners and toppings, cementitious patches & repair mortars.• Interior and exterior applications.
Features of Atlas Finish-Film• Signifi cantly reduces surface moisture evaporation to extend and facilitate the fi nishing process during hot, dry or windy conditions.• Reduces or even eliminates plastic shrinkage cracking.• Reduces wind crusting and stickiness, allowing for easier troweling.• Promotes higher-strength, lower slump concrete by allowing lower slump mixes without the need for additional mix water to resist rapid evaporation. • Allows for proper and easier fi nishing of dry-shake fl oor hardeners. • Does not inhibit the performance or bond of curing compounds, sealers or other treatments to be applied to the concrete surface at a later time.• Does not change the fi nal color of the concrete surface.• Increases productivity; each fi nisher can properly fi nish a larger area.• Water-based formulation; no odor.
ATLAS FINISH-FILMEvaporation Reducer & Finishing Aid
Read Product Data Sheet & MSDS prior to use.
Packaging Product Code
5 gallon pails 30.11.16025
55 gallon drums 30.11.16035
Technical Data & Specifi cationsVOC CompliantAs recommended by ACI 302: Evaporation Retardant / Monomolecular FilmTypical Coverage: 100 - 300 ft2 per gal.
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
92
DescriptionAtlas Cure & Seal-14% is a water-based, acrylic copolymer solution that provides concrete with both an excellent cure and seal of the concrete surface. Cure & Seal-14% forms a clear membrane on the concrete surface to retain the necessary moisture in freshly placed concrete for proper strength development and help prevent plastic shrinkage cracks & dusting. This multi-funtional product provides a low to medium sheen fi nish on the surface and helps resist staining and penetration of mild chemicals, oils, salts and other contaminants.
Features of Atlas Cure & Seal-14%• Cure, seal, harden and dustproof concrete surfaces in one application.• Produces a tough membrane on concrete surface for effi cient moisture retention during curing period.• Minimizes plastic shrinkage cracks, dusting & spalling.• Protects surface from staining and penetration of mild chemicals, oils, salts and other contaminants.• Dries clear and provides a sheen fi nish that enhances the natural look of concrete.• May be used for most colored concrete applications.
Technical Data & Specifi cationsASTM C-309, Type 1 & 1D, Class A & BAASHTO M-148, Type 1NAVDOCK 13 YF VOC CompliantTypical Coverage: 200 - 400 ft2 per gal.
ATLAS CURE & SEAL 14%Clear, Water-Based, Acrylic Cure & Seal
Read Product Data Sheet & MSDS prior to use.
DescriptionAtlas Cure & Seal-30% is a water-based, acrylic copolymer solution that provides concrete with both an excellent cure and seal of the concrete surface. Cure & Seal-30% forms a clear membrane on the concrete surface to retain the necessary moisture in freshly placed concrete for proper strength development and help prevent plastic shrinkage cracks & dusting. This multi-funtional product provides a high sheen fi nish on the surface and helps resist staining and penetration of mild chemicals, oils, salts and other contaminants.
Features of Atlas Cure & Seal-30%• Cure, seal, harden and dustproof concrete surfaces.• Produces a tough membrane on concrete surface for effi cient moisture retention during curing period.• Minimizes plastic shrinkage cracks, dusting & spalling.• Protects surface from staining and penetration of mild chemicals, oils, salts and other contaminants.• Dries clear and provides a sheen fi nish that enhances the natural look of concrete.
Technical Data & Specifi cationsASTM C-309, Type 1 & 1D, Class A & BAASHTO M-148, Type 1, NAVDOCK 13 YFASTM C-1315, Type 1, Class A & B VOC CompliantTypical Coverage: 200 - 400 ft2 per gal.
Clear, Water-Based, High Solids Acrylic Cure & SealATLAS CURE & SEAL 30%
Read Product Data Sheet & MSDS prior to use.
Concrete Curing & Sealing Compounds
Packaging Product Code
5 gallon pails 30.12.10025
55 gallon drums 30.12.10035
275 gallon totes 30.12.10045
Packaging Product Code
5 gallon pails 30.12.11025
55 gallon drums 30.12.11035
275 gallon totes 30.12.11045
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
93
DescriptionAtlas Easy-Seal is a clear acrylic concrete curing and sealing compound that helps provide proper strength development and a protective seal for concrete surfaces. Easy-Seal has been formulated with premium materials to produce a fast-drying, non-yellowing, membrane-forming product that meets ASTM C-309 curing standards and provide a durable fi nish for increased protection from chemicals, oils, chlorides and stains.
Uses• Cure, seal, harden & dustproof freshly placed concrete surfaces or seal, harden & dustproof aged concrete.• Exposed columns, beams & walls, commercial & industrial fl oors, parking structures, offi ce buildings, driveways, sidewalks, architectural concrete, etc.• Ideal for tilt-up casting slabs prior to the application of a bondbreaker.• Interior, exterior, horizontal and vertical applications.
Technical Data & Specifi cationsASTM C-309, Type 1, Class A & BAASHTO M-148, Type 1VOC Compliant
Features of Atlas Easy-Seal• Provides a one-application cure, sealer, hardener and dustproofer for many applications.• Meets ASTM C-309 curing specifi cation and is compatible with Atlas Easy-Lift bondbreakers.• Rapid-drying to allow traffi c on treated surface in a minimal amount of time.• Helps provide a strong concrete surface while minimizing shrinkage cracks, spalling, and dusting.• Produces a clear sheen surface fi nish that will not yellow, even when exposed to ultraviolet rays. • Increases protection from chemical attack and stains from oils, grease and other contaminants.• Minimizes clean-up time and costs. Sealed concrete surface is easy to clean and maintain.• Helps prevent effl orescence.• Safe and easy to use for exterior or interior applications; very low odor.
ATLAS EASY SEALClear, Water-Based, Acrylic Cure & Seal
Atlas Easy-Seal is compatible with Atlas bondbreakers for Tilt-Up construction!...Atlas provides complete product systems to save contractors $$$ & liability, while providing a better fi nished product!
ATLAS TECH-1315Read Product Data Sheet & MSDS prior to use.
Read Product Data Sheet & MSDS prior to use.
DescriptionAtlas Tech-1315 is a high-performance, water-based, acrylic concrete cure, sealer, hardener and dustproofer. This easy-to-use product is ultraviolet resistant and meets the demanding ASTM C-1315 specifi cation for moisture retention and color stability when applied to freshly placed concrete. Tech-1315 produces a protective fi lm on the concrete surface to help concrete reach its maximum strength and hardness and to improve resistance to harsh weather conditions, most acids & chemicals, oils, salts and other contaminants. Tech-1315 dries to a clear, medium sheen fi nish that will enhance the natural appearance of concrete, brick, decorative stone and exposed aggregate.
Uses• Cure, seal, harden & dustproof freshly placed concrete or seal, harden & dustproof aged concrete surfaces.• Interior, exterior, horizontal and vertical applications.• Seal and enhance the appearance of aged concrete, terrazzo, brick and masonry.• Ideal for exposed columns, beams & walls, commercial & industrial fl oors, food processing plants, maintenance facilities, factories, parking structures, offi ce buildings, driveways, sidewalks, architectural concrete, etc.
Clear, Water-Based, High Solids Acrylic Cure & Seal Meeting ASTM C-1315
Features of Atlas Tech-1315• Meets ASTM C-1315 specifi cation. Excellent curing properties and UV resistance.• Cure, seal, harden and dustproof concrete surfaces in one application.• Produces a tough membrane on concrete surface for excellent moisture retention during curing period.• Minimizes plastic shrinkage cracks, dusting & spalling.• Increases durability and abrasion resistance of concrete.• Protects surface from staining and penetration of most acids, chemicals, alkalis, oils and other contaminants.• Dries clear and provides a medium sheen fi nish that enhances the natural look of the treated surface.• Excellent for interior or exterior applications; UV resistant.• Helps prevent effl orescence.• Fast drying.• Ready-to-use and easy to apply.• Reduces cleaning and maintenance for occupant.
Technical Data & Specifi cationsASTM C-1315, Type 1, Class A & BASTM C-309, Type 1 & 1D, Class A & BFederal Specifi cation TT-C-800AUSDA Approved, VOC Compliant
CoverageBroom Finish: 200 - 400 ft2 per gal.Smooth Finish: 300 - 500 ft2 per gal.
Concrete Curing & Sealing Compounds
Packaging Product Code
5 gallon pails 30.12.11525
55 gallon drums 30.12.11535
275 gallon totes
CoverageBroom Finish: 200 - 400 ft2 per gal.Smooth Finish: 300 - 500 ft2 per gal.Tilt-up Casting Slab: 400 - 600 ft2 per gal.
Packaging Product Code
5 gallon pails 30.12.12025
55 gallon drums 30.12.12035
275 gallon totes 30.12.12045
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
94
DescriptionAtlas Expo-SealTM is a high performance concrete curing & sealing compound that provides a tough and clear protec-tive coating over exposed concrete surfaces. Expo-SealTM is a unique acrylic co-polymer formulation that will help prevent shrinkage cracks and produce a concrete surface with maximum strength and increased resistance to traffi c, moisture and stains. Expo-SealTM is ultraviolet resistant and provides an attractive fi nish to architectural concrete. This durable concrete treatment enhances the beauty of colored concrete, exposed aggregate and stone.
Technical Data & Specifi cationsASTM C-1315, Type 1, Class A & BVOC Compliant Typical Coverage: 200 - 300 ft2 per gal.
Atlas Expo-SealTM is ideal for application on exposed aggregate & decorative concrete to provide
excellent protection and a “wet-look” fi nish.
Uses• Cure, seal, harden and dustproof concrete surfaces.• Interior, exterior, horizontal and vertical exposed concrete surfaces.• Areas subjected to heavy walking or vehicle traffi c. • Protect and enhance the appearance of existing concrete, exposed aggregate, colored concrete, stone, brick, tile, stucco, plaster, etc.• Ideal for shopping plazas, hotels, schools, stadiums, lobbies, residences, driveways, garages, patios, barbeque areas, or any concrete surface where a high gloss, protec-tive coating is desired.
Features of Atlas Expo-SealTM
• Meets demanding ASTM C-1315 specifi cation; excellent curing properties and UV resistance.• Protects, dustproofs and enhances the appearance of concrete, exposed aggregate, brick, masonry and stucco surfaces.• Excellent resistance to high walking traffi c and wear.• Good chemical and stain resistance.• Excellent weather and corrosion resistance.• Provides an attractive “wet-look” fi nish.• Excellent for interior or exterior applications• Provides an easy to clean surface.• Durable fi lm keeps exposed aggregate from popping-out.• May be used for most colored concrete applications.• Helps prevent effl orescence.• Fast-drying.• Ready-to-use and easy to apply.• Consistent and uniform results.
ATLAS EXPO SEALTM
Read Product Data Sheet & MSDS prior to use.
Clear, High Gloss, Durable, Laquer-Based, Acrylic Cure & Seal
DescriptionAtlas Out-Shine Sealer is a heavy-duty, clear, water-based liquid sealer and dustproofer that is designed to protect and enhance the appearance of exterior or interior concrete, exposed aggregate, brick, masonry and stucco surfaces. This innovative synthetic polymer formulation provides superior surface protection with excellent abrasion resistance in areas of high traffi c, resistance to penetration and staining of mild chemicals and acids, and resistance to weathering and corrosion. Out-Shine Sealer is a high-solids product that produces a gloss fi nish that will not discolor when exposed to sunlight.
Uses• Seal and protect concrete, exposed aggregate, brick, masonry and stucco surfaces.• Exterior and interior applications.• Horizontal and vertical applications.• Ideal for shopping plazas, schools, hospitals, factories, stadiums, walkways, patios, swimming pool decks, terrazzo fl oors, masonry walls, etc.
ATLAS OUTSHINE SEALER
Read Product Data Sheet & MSDS prior to use.
Clear, Water-Based, High Solids Acrylic Sealer Features of Atlas Out-Shine Sealer• Seals, protects, dustproofs and enhances the appearance of concrete, exposed aggregate, brick, masonry and stucco surfaces.• Increases durability and abrasion resistance of concrete.• Good chemical and stain resistance.• Provides an attractive gloss fi nish.• Excellent for exterior applications; UV resistant.• Helps prevent effl orescence.• Durable fi lm prevents aggregate from popping out.• Provides an easy to clean surface.• Low odor, pleasant to use indoors.• May be used for most colored concrete applications.
Technical Data & Specifi cationsVOC CompliantTypical Coverage: 200 - 300 ft2 per gal.
Concrete Curing &Sealing Compounds
Packaging Product Code
1 gallon pails 30.12.12520
5 gallon pails 30.12.12525
Packaging Product Code
5 gallon pails 30.12.13025
55 gallon drums 30.12.13035
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
95
DescriptionAtlas Elite-HSTM is a colorless, odorless, penetrating, water-based, siliconate solution formulated to seal, densify, harden and dustproof concrete and masonry sur-faces. Elite-HSTM uses a chemical reaction to fi ll the pores in concrete, therefore increasing the abrasion resistance and durability of the concrete and reducing the porosity of the treated surface. This concrete treatment will protect the most abused fl oors from traffi c and wear, and increase resistance to chemicals, water, stains and black tire marks. Elite-HSTM protects, preserves and strengthens concrete and masonry surfaces while providing a permanent low-gloss satin sheen fi nish that is very easy to clean and maintain.
Uses• Ideal for warehouses, distribution centers, industrial plants, factories, food processing plants, maintenance facilities, schools, hospitals, shopping centers, retail fl oors, showrooms, restaurants, parking structures, garages, airports, stadiums, etc. • Interior and exterior applications.• New and aged concrete and masonry applications.
Features of Atlas Elite-HSTM
• Seals, densifi es, hardens and dustproofs concrete and masonry surfaces in one application.• Produces a low-gloss, integral satin sheen fi nish that will not wear-away.• Treated concrete fl oors are more resistant to abrasion and wear from vehicles, forklifts, pallets, heavy walking traffi c, etc.• Prevents concrete fl oors from dusting to protect personnel and stored materials from exposure to concrete dust.• Reduces surface porosity, helping to protect concrete from stains, spills, oils and chemical attack. • Resists black tire marks on fl oors.• Will not peel, scratch, blister or discolor; outlasts fl oor coatings.• Breathable sealer for both interior or exterior use.• Provides an easy to clean and maintain surface.• Safe and easy to use; no mixing, etching or expensive equipment needed.• Enhances the performance and look of concrete fl oors treated with dry-shake fl oor hardeners.• Environmentally safe.• No harmful fumes or odors; pleasant to use indoors.• Water-based formulation; meets most stringent VOC regulations.• Develops a more polished look with age and wear.• Long-term warranty available.
Technical Data & Specifi cationsUSDA ApprovedVOC CompliantTypical Coverage: 200 -400 ft2 per gal.
ATLAS ELITE HSTMHigh Performance, Clear, Water-Based, Penetrating Concrete Hardener, Sealer & Dustproofer
MaintenanceElite-HSTM develops a low-gloss, integral shine that will last the lifetime of the concrete. The more traffi c the concrete gets, the better it will look! For an immediate shine, a fl oor buffer may be used. Treated concrete surfaces are easily cleaned with a mop and warm, soapy water or a scrubbing machine.
WarrantyAtlas provides a 20 year anti-dusting guarantee against the effects of wear and abrasion for fl oors treated with Elite-HSTM. Contact your local Atlas representative for details.
SEALERHARDENER
DUSTPROOFER
Atlas Elite-HSTM is easily applied to concrete surfaces with brooms, squeegees or buffi ng machines to provide a very durable concrete fl oor with an attractive low-gloss
sheen fi nish that is easy to clean and maintain.
Read Product Data Sheet & MSDS prior to use.
Concrete Curing & Sealing Compounds
Packaging Product Code
5 gallon pails 30.12.13525
55 gallon drums 30.12.13535
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
96
ATLAS EASY-LIFT FDTM
DescriptionAtlas Easy-Lift FDTM is a high-performance, chemically reactive, water-based, fast drying cure and bondbreaker for tilt-up and precast construction. Easy-Lift FDTM is applied to the concrete casting slab to effi ciently prevent the bonding of subsequent concrete pours. This premium-grade bondbreaker contains organic compounds that react with the concrete to produce a water impermeable barrier on the surface of the casting slab. When the tilt-up panel is poured, the barrier restricts the casting slab from absorbing the mix water from the panel, resulting in an easy to lift panel and a strong, smooth, uniform and clean panel appearance. This fast drying formulation allows crews to complete work more quickly and produces cleaner panels by reducing occurrence of dirt accumulation on the casting slab. Easy-Lift FDTM meets all VOC regulations.
Features Of Atlas Easy-Lift FDTM
• Provides an easier lift of tilt-up panels than other bondbreakers.• Fast-drying formulation allows crews to get on slab earlier to form panels and place reinforcing steel. Also minimizes accumulation of dirt and dust on casting surface, resulting in cleaner panels.• Chemically reactive formulation minimizes “osmotic- effect”; panel surface will be stronger and have a more uniform and clean appearance.• Strong, smooth, uniform and clean panels result in minimal sacking/patching costs.• Easy to apply; no back-rolling required. • Rain resistant after coats dry.• Resists construction foot traffi c during placement of reinforcing steel.• Does not contain waxes, resins or silicones.• Will not impair the adhesion of paints or coatings after the panels have been lifted and placed, when applied according to manufacturer’s application instructions.• Safe and easy to use; low odor.• Economical bondbreaker system; exhibits greater coverage rates than other bondbreakers.• Provided in agitator drums.• Water-based formulation; meets most stringent VOC regulations.
Technical Data & Specifi cationsMeets all federal and local VOC requirements.Dry Time (700F): 1 hour
CoverageCure Coat: 400 ft2 per gal.1st Bondbreaker Coat: 500 - 700 ft2 per gal.2nd Bondbreaker Coat: 550 - 700 ft2 per gal.
MaintenanceAtlas Easy-Lift bondbreakers leave no residue on the concrete surface. Once all panels have been lifted and placed, the walls may be patched, painted or coated. Follow the surface preparation & application instruc-tions of these other applied materials.
The concrete fl oor, if left exposed, may be sealed with Atlas Elite-HSTM. This concrete hardener & sealer will provide a very durable concrete fl oor with an attractive low-gloss sheen fi nish that will last the lifetime of the concrete. See Elite-HSTM product data sheet for ad-ditional information.
Atlas Easy-Lift FDTM is the premier bondbreaker on the market to produce a clean and easy panel lift. In addition
to the bondbreakers, Atlas provides contractors with a complete tilt-up package, including inserts, brace
rentals, engineering, etc.
Atlas Easy-Lift FDTM is a fast-drying formulation that allows contractors to quickly get back on the slab to form panels and place reinforcing steel. It also minimizes the accumulation of dirt and dust on the surface; therefore
producing cleaner panels.
Premium, Fast-Drying, Water-Based Cure & Bond Breaker for Tilt-Up & Precast
Read Product Data Sheet & MSDS prior to use.
Bondbreakers forTilt-up & Precast
Packaging Product Code
5 gallon pails 30.15.10525
55 gallon drums 30.15.10535
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
97
DescriptionAtlas Easy-Lift ETM is a high-performance, chemically reactive, water-based cure and bondbreaker for tilt-up and precast construction. Easy-Lift ETM is applied to the concrete casting slab to effi ciently prevent the bonding of subsequent concrete pours. This premium-grade bondbreaker contains organic compounds that react with the excess lime in concrete. The reaction produces a gel in the pores of the concrete which effectively forms a water impermeable barrier. When the tilt-up panel is poured, the barrier restricts the casting slab from absorbing the mix water from the panel, which results in an easy to lift panel and a strong, smooth, uniform and clean panel appearance. Easy-Lift ETM meets all federal and local VOC regulations.
Technical Data & Specifi cationsMeets all federal and local VOC requirements.Dry Time (700F): 2 hours
CoverageCure Coat: 400 ft2 per gal.1st Bondbreaker Coat: 500 - 700 ft2 per gal.2nd Bondbreaker Coat: 550 - 700 ft2 per gal.
ATLAS EASY-LIFT ETMPremium Water-Based Cure & Bond Breaker for Tilt-Up & Precast
Read Product Data Sheet & MSDS prior to use.
Features of Atlas Easy-Lift ETM
• Provides an easier lift of tilt-up panels than other bondbreakers.• Chemically reactive formulation minimizes “osmotic- effect”; panel surface will be stronger and have a more uniform and clean appearance.• Strong, smooth, uniform and clean panels result in minimal sacking/patching costs.• Easy to apply; no back-rolling required. • Rain resistant after coats dry.• Resists construction foot traffi c during placement of reinforcing steel.• Does not contain waxes, resins or silicones.• Will not impair the adhesion of paints or coatings after the panels have been lifted and placed, when applied according to manufacturer’s application instructions.• Safe and easy to use; low odor.• Economical bondbreaker system; better coverage rates than other bondbreakers.• Water-based formulation; meets most stringent VOC regulations.
ATLAS EASY-LIFT STMPremium Solvent-Based Cure & Bond Breaker for Tilt-Up & Precast
DescriptionAtlas Easy-Lift STM is a high-performance, chemically reactive, solvent-based, fast drying cure and bondbreaker for tilt-up and precast construction. Easy-Lift STM is applied to the concrete casting slab to effi ciently prevent the bonding of subsequent concrete pours. This premium-grade bondbreaker contains organic compounds that react with the excess lime in concrete. The reaction produces a gel in the pores of the concrete which effectively forms a water impermeable barrier. When the tilt-up panel is poured, the barrier restricts the casting slab from absorbing the mix water from the panel, which results in an easy to lift panel and a strong, smooth, uniform and clean panel appearance. Easy-Lift STM contains a red fugitive dye to aid in the application process.
Technical Data & Specifi cationsDry Time (700F): 30 - 60 minutes
CoverageCure Coat: 400 ft2 per gal.1st Bondbreaker Coat: 500 - 700 ft2 per gal.2nd Bondbreaker Coat: 550 - 700 ft2 per gal.
Features of Atlas Easy-Lift STM
• Provides an easier lift of tilt-up panels than other bondbreakers.• Dries quickly to minimize accumulation of dirt and dust on casting surface, resulting in cleaner panels. Also allows crews to get on slab earlier to form panels and place reinforcing steel.• Chemically reactive formulation minimizes “osmotic-effect”; panel surface will be stronger and have a more uniform and clean appearance.• Strong, smooth, uniform and clean panels result in minimal sacking/patching costs.• Easy to apply; no back-rolling required. • Rain resistant after coats dry.• Does not contain waxes, resins or silicones.• Will not impair the adhesion of paints or coatings after the panels have been lifted and placed, when applied according to manufacturer’s application instructions.• Does not need to be agitated prior to application.
Read Product Data Sheet & MSDS prior to use.
Bondbreakers for Tilt-up & Precast
Packaging Product Code
5 gallon pails 30.15.10025
55 gallon drums 30.15.10035
Packaging Product Code
5 gallon pails 30.15.11025
55 gallon drums 30.15.11035
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
98
DescriptionAtlas Citrus-Clean is a strong and environmentally safe concrete cleaner, degreaser and stripper. Formu-lated from orange peels and designed as a multi-pur-pose cleaning solution, Citrus-Clean may be used on concrete surfaces to remove oil spills, grease, black tire marks, curing compounds, cutback adhesives and other stubborn materials and stains. Citrus-Clean will not etch the concrete surface, has a pleasant citrus scent, and is easily rinsed-away with water.
Uses• Effectively cleans concrete surface of oil spills, grease, black rubber tire marks, stains and other stubborn contaminants.• Ideal for warehouses, industrial plants, factories, parking garages, airport runways, loading docks, and shipping & receiving areas. • Strips curing compounds and fl oor sealers.• Removes un-cured epoxies from tools and equipment.• Prepares concrete surfaces for application of sealers and overlays.• Interior and exterior applications.
Features of Atlas Citrus-Clean• A strong and safe cleaner, degreaser and stripper for concrete surfaces.• Effectively removes tough and stubborn materials and stains.• Safe to use in many different locations - restaurants, hospitals, schools, food processing plants, etc.• Pleasant to use; nice citrus scent. • Dilute and rinse with water for different cleaning strengths. • Does not etch concrete surfaces.• Non-toxic, non-fl ammable and non-carcinogenic; less risk of EPA or OSHA fi nes and employee health related lawsuits.• Cleans-up with just water.
Technical Data & Specifi cationsVOC CompliantMeets USDA specifi cations for use in food processing areas.Typical Coverage: 150 ft2 per gal.
Strong & Safe Citrus-Based, Multi-Purpose Cleaner, Degreaser & Stripper
Read Product Data Sheet & MSDS prior to use.
ATLAS CITRUS-CLEAN
ConstructionChemicals
Packaging Product Code
1 gallon jugs 30.13.10020
5 gallon drums 30.13.10025
55 gal drums 30.13.10035
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
99
ATLAS TOP-ETCHSpray-Applied Surface Retardant for Concrete Flatwork
DescriptionAtlas Top-Etch is an easy to use, liquid surface retardant that is sprayed onto fresh concrete to produce beautiful exposed aggregate concrete fl atwork. Top-Etch is designed to retard the set of portland cement at the surface while the concrete below the surface cures normally. This treatment provides an excellent economical architectural fi nish highlighting the natural color and texture of the aggregates. Top-Etch is available in regular (blue) or deep (red) strengths.
Uses• Exposes the aggregate in fresh concrete on fl oor slabs, sidewalks, entryways, driveways, patios, pool decks, etc.• Ideal for shopping plazas, schools, stadiums, lobbies, residences, or any concrete fl atwork where an economical architectural fi nish is desired. • Provides a roughened surface for bonding subsequent coatings or treatments to the concrete.• Interior and exterior applications.
Features• Economical treatment to concrete fl atwork that provides an excellent architectural fi nish highlighting the original color and texture of the aggregates.• Consistent and uniform results.• Easy to use spray-apply formulation with a fugitive dye for identifi cation of treated areas.• No expensive equipment needed for application. • Cleans-up with water. • Much cleaner and less expensive than sandblasting.• May be used with colored concrete.• Water-based formulation; no odor and no acid residue.
Technical Data & Specifi cationsVOC CompliantTypical Coverage: 100 - 150 ft2 per gal.
Atlas Top-Etch is easy to apply & provides a consistent & economical exposed aggregate architectural fi nish for driveways, patios, shopping plazas, sidewalks, etc. After
Top-Etch application, protect the exposed aggregate concrete with an application of Atlas Expo-SealTM.
Surface Retarder
Read Product Data Sheet & MSDS prior to use.
Packaging Product Code
1 gallon jugs 35.10.10520
5 gallon pails 35.10.10525
Packaging Product Code
1 gallon jugs 35.10.11020
5 gallon pails 35.10.11025
Atlas Top-Etch
Atlas Top-Etch Deep
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
100
ATLAS ACRYL-BONDAcrylic Latex Bonding Agent & Admixture for Portland Cement, Patching Materials and other construction products.
DescriptionAtlas Acryl-Bond is a high-strength, non-reemulsifi able, acrylic latex emulsion for use as a bonding agent or admixture for concrete repair mortars, patching materials, grouts, masonry coatings and other cement-based products. Acryl-Bond signifi cantly enhances the performance of cement-based materials by improving the adhesion, compressive, tensile and fl exural strengths of the materials and provides excellent resistance to freeze/thaw cycles for both interior and exterior applications.
Uses• Mix with repair mortars, patching materials, grouts, masonry coatings and other cement-based products for increased adhesion and durability. • Bonding new concrete to aged concrete.• Bonding stucco, mortar or plaster to sound surfaces. • Interior and exterior applications.• Above and below grade applications.• Ideal for use with patching materials for concrete fl oors, walkways, ramps, walls, columns and beams.
Features of Atlas Acryl-Bond• Improves bond, compressive, tensile and fl exural strengths of cement-based materials.• Provides excellent adhesion for a superior bond to the existing surface. • Produces more durable and impact resistant repair mortars and patches. • Improves stability through freeze/thaw cycles and resistance to moisture penetration & chemical attack.• Both interior and exterior applications; will not re-emulsify when exposed to water.• Water-based formulation; meets most stringent VOC regulations.• Easy to use, low odor.
Technical Data & Specifi cationsASTM C-1059, Type 2VOC Compliant
Read Product Data Sheet & MSDS prior to use.
Liquid BondingAgents
Packaging Product Code
1 gallon jugs 30.25.10020
5 gallon pails 30.25.10025
55 gallon drums 30.25.10035
ATLAS H2 BONDCement bonding agent and admixture for H2 patch & overlay
DescriptionAtlas H2 Bond is a next generation cement bonding agent and admixture specifi cally formulated to increase the fl exural, bond and early and overall compressive strength of modifi ed mixes. Both lab testing and fi eld applications show increased strengths, and more durable, long lasting patches will be achieved. Atlas H2 Bond can be used as an admixture to greatly enhance the adhesion of cement mortars as well as improve resistance to oil, water, salt and chemical penetration. Atlas H2 Bond exhibits excellent re-sistance to freeze/thaw cycles and can be used for interior or exterior applications.
Uses• Bonding new concrete to old concrete in interior or exterior applications. • Designed for use with cementitious compositions such as patching materials, grouts, masonry coatings, stucco coatings and masonry mortars to increase chemical resistance and performance. Read Product Data Sheet & MSDS prior to use.
Features of Atlas H2 Bond• Durable: Increase bond strength, fl exural strength, compressive strength and chemical resistance over non-modifi ed mortars.• Curing: Increase water retention properties.• Excellent bonding agent: Superior adhesion properties.• Freeze/Thaw resistance: Increased resistance to dramatic climatic changes.• Consistent: Strict quality control testing and standards.
Technical Data & Specifi cationsASTM C-1059, Type 2VOC Compliant
Packaging Product Code
1 gallon jugs 35.25.10520
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
101
ATLAS INTER-BONDRe-emulsifi able, Poly-Vinyl Acetate Bonding Agent & Admixture forPortland Cement, Patching Materials & other construction products
DescriptionAtlas Inter-Bond is a general purpose, re-emulsifi able, poly-vinyl acetate emulsion for use as a bonding agent or admixture for repair mortars, patching materials, underlayments, grouts, masonry coatings, and other cement-based products. Inter-Bond provides increased adhesion and an extended open time for placing concrete, coatings and other toppings to existing concrete or other sound substrates for dry interior applications. This bonding agent may be applied up to 24 hours prior to pouring, patching or coating. Inter-Bond is an easy to use product that improves the adhesion, compressive, tensile and fl exural strengths of cement-based materials.
Uses• Mix with repair mortars, underlayments, patching materials, masonry coatings & other cement-based or gypsum-based products for increased adhesion & durability. • Bonding new concrete to aged concrete.• Bonding stucco, mortar or plaster to sound surfaces. • Dry interior applications.• Will bond to concrete, brick, tile, stone, block, plaster, gypsum board, lath or plywood.
Read Product Data Sheet & MSDS prior to use.
Features of Atlas Inter-Bond• Re-emulsifi able bonding agent allows an extended open time, up to 24 hours, for applications of subsequent toppings or coatings.• Provides excellent adhesion for a superior bond to the existing surface.• Improves bond, compressive, tensile and fl exural strengths of cement-based materials when used as an admixture.• Produces more durable and impact resistant repair mortars and patches. • Water-based formulation; meets most stringent VOC regulations.• Easy to use, low odor.
Technical Data & Specifi cationsASTM C-1059, Type 1ASTM C-1042, Type 1VOC Compliant
Packaging Product Code
1 gallon jugs 30.25.11020
5 gallon pails 30.25.11025
55 gallon drums 30.25.11035
ATLAS TECH-BONDPremium, Re-emulsifi able Ethyl-Vinyl Acetate Bonding Agent
DescriptionAtlas Tech-Bond is a premium, high-solids, re-emulsifi able, ethyl-vinyl acetate (EVA) emulsion for use as a bonding agent or admixture when placing concrete, repair mortars, patching materials, underlayments, grouts, masonry coatings and other cement-based products. Tech-Bond establishes a superior bond strength when compared to acrylic or PVA bonding agents. Tech-Bond provides an extended open time for placement of concrete, repair mortars, patching materials, stucco and plaster, and is ideal for use as a primer prior to placing self-leveling underlayments. This bonding agent may be applied up to 7 days prior to pouring, patching or coating, and will re-emulsify only 1 time within 7 days of application. Tech-Bond is an easy to use product that improves the adhesion, compressive, tensile and fl exural strengths of cement-based materials.
Uses• Bonding new concrete to aged concrete.• Bonding patching materials to concrete, masonry or brick.• Mix with repair mortars, patching materials, grouts, masonry coatings and other cement-based products for increased adhesion and durability. • Use as a primer prior to placing self-leveling underlayments. • Interior or exterior applications.
Features of Atlas Tech-Bond• Superior adhesion for placing concrete, repair mortars, patching materials, underlayments and other cement- based products.• Re-emulsifi able bonding agent allows an extended time, up to 7 days, for placing concrete or subsequent toppings & coatings.• Will re-emulsify only one time within 7 days of bonder application.• Improves bond, compressive, tensile and fl exural strengths of cement-based materials when used as an admixture.• Produces more durable and impact resistant repair mortars and patches.• Improves workability of cement-based materials.• High solids formulation that may be diluted with water to achieve desired consistency.• Water-based formulation; meets most stringent VOC regulations.• Easy to use, low odor.
Technical Data & Specifi cationsASTM C-1059, Type 1ASTM C-1042, Type 1VOC Compliant
Apply up to 7 days before pouring concrete!
Liquid BondingAgents
Read Product Data Sheet & MSDS prior to use.
Packaging Product Code
1 gallon jugs 30.25.11520
5 gallon pails
55 gallon drums
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
102
EPOXY APPLICATION GUIDE
Atlas Injection Resin 175 is a very low viscosity epoxy that will penetrate
hairline cracks.
Atlas LV Injection Epoxy is a 100% solids easy to pump injection resin to
structurally restore concrete structures.
Structural EpoxyAdhesives
BONDINGNEW TO OLD CONCRETE & OLD TO NEW CONCRETE
ATLAS EPOXY BONDERATLAS LPL EPOXY BONDER
BINDING IRREGULAR SURFACES ATLAS HI-MOD EPOXY GEL
ANCHORING
THREADED RODS, BOLTS, DOWELS, SCREENS, ETC.
ATLAS HI-MOD EPOXY GELUNITEX PRO-POXY 300UNITEX PRO-POXY 300 FASTUNITEX PRO-POXY 400
CRACK INJECTION
DELAMINATION REPAIR ATLAS E-PRO SEAL SLVHAIR LINE CRACKS (0.05 - 0.2 MM) ATLAS INJECTION RESIN 175
FINE CRACKS (0.2 - 0.5 MM) ATLAS LV INJECTION EPOXY UNITEX PRO-POXY 100
CRACKS (0.5 - 0.8MM) ATLAS EPOXY BONDER
WIDE CRACKS & VOIDS ( > 0.8 MM)ATLAS HI-MOD EPOXY GEL UNITEX PRO-POXY 300 UNITEX PRO-POXY 300 FAST
CAP SEALING & PORT SETTINGATLAS HI-MOD EPOXY GEL UNITEX PRO-POXY 300 UNITEX PRO-POXY 300 FAST
SEALING
CONTROL JOINTS / SAW-CUTS ATLAS EPOXY JOINT FILLEROVERLAYS FOR BRIDGES, PARKING DECKS, ETC.
ATLAS E-PRO OVERLAYATLAS TECH-DECK
CONCRETE SURFACES & CRACK HEALER-SEALER FOR BRIDGES, PARKING DECKS, ETC.
ATLAS E-PRO SEAL SLV ATLAS TECH SEAL HMWM
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
103
ATLAS INJECTION RESIN 175100% Solids, High Strength, Low Viscosity Epoxy Resin
ATLAS LV INJECTION EPOXY100% Solids, High Strength, Low Viscosity Multi-Purpose Epoxy Resin
DescriptionAtlas Injection Resin 175 is a two-component, 100% solids, high modulus, high strength, very low viscosity epoxy resin adhesive for multiple uses. Injection Resin 175 is an ideal material for repairing concrete cracks to structurally restore the integrity of concrete structures. This moisture tolerant epoxy provides excellent penetration of concrete cracks by pressure injection or by gravity-feed methods. Injection Resin 175 conforms to ASTM C-881 specifi cations.
Uses• Pressure-inject horizontal, vertical or overhead cracks for a structural repair of concrete structures.• Gravity-feed horizontal concrete and masonry cracks.• Grout anchor bolts, dowels and reinforcing steel.• Mix with aggregate to repair concrete spalls and voids as an epoxy repair mortar. • Seal interior slabs and exterior above grade slabs to protect concrete and reinforcing steel from moisture, chlorides and chemical attack.• Bonding new concrete to hardened concrete or patching materials to hardened concrete.• Bonding wood, masonry & other construction materials.• Interior or exterior applications.
Features of Atlas Injection Resin 175• Excellent bond strength to many materials.• Moisture tolerant to allow for application on both dry or wet surfaces.• Super low-viscosity (175 cps) consistency for deep penetration of concrete cracks.• High-modulus for superior strength.• Good chemical resistance to protect concrete slabs and decks.• Low odor formulation.• Proven fi eld performance.
Technical Data & Specifi cationsASTM C-881: Types I, II, IV & V, Grade 1, Classes B & C.Meets USDA specifi cations for use in food processing areas.VOC Compliant.Cures to a transparent amber color.See Testing Data Chart for test results.
Read Product Data Sheet & MSDS prior to use.
DescriptionAtlas LV Injection Epoxy is a two-component, 100% solids, high modulus, high strength, low viscosity epoxy resin adhesive for multiple uses. LV Injection Epoxy is an ideal material for repairing concrete cracks to structurally restore the integrity of concrete structures. This moisture tolerant epoxy provides excellent bond strength for grouting dowels & bolts and may also be mixed with aggregate to produce a high strength, fast-setting mortar. LV Injection Epoxy conforms to ASTM C-881 specifi cations.
Uses• Pressure-inject horizontal, vertical or overhead cracks for a structural repair of concrete structures.• Grout anchor bolts, dowels and reinforcing steel.• Mix with aggregate to repair concrete spalls and voids as an epoxy repair mortar. • Seal interior slabs and exterior above grade slabs to protect concrete and reinforcing steel from moisture, chlorides and chemical attack.• Bonding new concrete to hardened concrete or patching materials to hardened concrete.• Bonding wood, masonry & other construction materials.• Interior or exterior applications.
Features of Atlas LV Injection Epoxy• Excellent bond strength to many materials.• Moisture tolerant to allow for application on both dry or wet surfaces.• Low-viscosity (500 cps) consistency for deep penetration of concrete cracks.• High-modulus for superior strength.• Good chemical resistance to protect concrete slabs and decks.• Low odor formulation.• Proven fi eld performance.
Technical Data & Specifi cationsASTM C-881: Types I, II, IV & V, Grade 1, Classes B & C.Meets USDA specifi cations for use in food processing areas.VOC Compliant.Cures to a transparent amber color.See Testing Data Chart for test results.
Low Viscosity Epoxies /Injection Resins
Packaging Product Code
1.5 quart kits (3 - 0.5 quart cans)
3 gallon kits (3 - 1 gal. cans) 30.20.12523
15 gallon kits (3 - 5 gal. pails) 30.20.12530
165 gallon kits (3 - 55 gal. drums)
Packaging Product Code
1.5 quart kits (3 - 0.5 quart cans) 30.20.13013
3 gallon kits (3 - 1 gal. cans) 30.20.13023
15 gallon kits (3 - 5 gal. pails) 30.20.13030
165 gallon kits (3 - 55 gal. drums)
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
104
DescriptionAtlas Epoxy Bonder is a two-component, 100% solids, high modulus, high strength, medium viscosity epoxy adhesive for multiple uses. Epoxy Bonder is an excellent material for bonding new concrete to old concrete, bonding steel to concrete, and for repairing concrete cracks. This moisture tolerant epoxy provides excellent bond strength for grouting dowels & bolts and may also be mixed with aggregate to produce a high strength, fast-setting mortar. Epoxy Bonder conforms to ASTM C-881 specifi cations.
Uses• Bonding new concrete to hardened concrete.• Bonding steel to new or hardened concrete.• Use as a binder for concrete, masonry, wood and steel. • Structural crack repairs.• Mix with aggregate for an epoxy grout or mortar.• Grout anchor bolts, dowels and reinforcing steel.• Multi-purpose pourable adhesive.• Interior or exterior applications.
Features of Atlas Epoxy Bonder• Excellent bond strength to many materials.• Moisture tolerant to allow for application on both dry or wet surfaces.• Sets rapidly for early strength.• Easy to use, low odor, 1:1 mix ratio.• Cures to a concrete gray color.• Proven fi eld performance.
Technical Data & Specifi cationsASTM C-881, Types I, II, IV & V, Grade 2, Classes B & C.VOC CompliantSee Product Data Sheet for test results
ATLAS EPOXY BONDER
DescriptionAtlas LPL Epoxy Bonder is a two-component, 100% solids, high modulus, high strength, medium viscosity, multi-purpose epoxy adhesive with an extended setting time. LPL Epoxy Bonder is an excellent material for bonding new concrete to old concrete, bonding steel to concrete, and for coating reinforcing steel as a corrosion inhibitor. The extended pot life of this epoxy provides extra time and easy application for placing concrete, repair mortars, and other materials. This moisture tolerant epoxy provides excellent bond strength for grouting dowels & bolts and may also be mixed with aggregate to produce a high strength epoxy mortar. LPL Epoxy Bonder conforms to ASTM C-881 specifi cations.
Uses• Bonding new concrete to hardened concrete.• Bonding steel to new or hardened concrete.• Use as a binder for concrete, masonry, wood and steel. • Apply to reinforcing steel as a corrosion inhibitor.• Structural crack repairs.• Mix with aggregate for an epoxy grout or mortar.• Grout anchor bolts, dowels and reinforcing steel.• Interior or exterior applications.
Features of Atlas LPL Epoxy Bonder• Excellent bond strength to many materials.• Extended pot life for ease of application; especially useful during high ambient temperatures.• Moisture tolerant to allow for application on both dry or wet surfaces.• Tough coating protects reinforcing steel from moisture and chlorides.• May be spray-applied.• Cures to a concrete gray color.• Low odor formulation.• Proven fi eld performance.
Technical Data & Specifi cationsASTM C-881, Types I, II & V, Grade 2, Classes B & C.VOC CompliantSee Product Data Sheet for test results
ATLAS LPL EPOXY BONDER
Read Product Data Sheet & MSDS prior to use.
Read Product Data Sheet & MSDS prior to use.
100% Solids, High Strength, Medium Viscosity, Multi-Purpose Epoxy Adhesive
100% Solids, High Strength, Medium Viscosity, Multi-Purpose Epoxy Adhesive With a Long Pot Life
Structural EpoxyAdhesives, Medium Viscosity
Packaging Product Code
2 quart kits (2 - 1 quart cans)
2 gallon kits (2 - 1 gal. cans) 30.20.10522
10 gallon kits (2 - 5 gal. pails) 30.20.10527
110 gallon kits (2 - 55 gal. drums)
Packaging Product Code
1.5 quart kits (3 - 0.5 quart cans) 30.20.11013
3 gallon kits (3 - 1 gal. cans) 30.20.11023
15 gallon kits (3 - 5 gal. pails) 30.20.11030
165 gallon kits (3 - 55 gal. drums)
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
105
DescriptionAtlas Hi-Mod Epoxy Gel is a two-component, 100% solids, high modulus, high strength, non-sag, multi-purpose epoxy gel adhesive. Hi-Mod Epoxy Gel is an excellent material for structural bonding of concrete, steel, wood, masonry and other materials. This moisture tolerant epoxy gel is the ideal consistency to seal cracks and set injection ports prior to injecting cracks with epoxy. Hi-Mod Epoxy Gel is easy to use for horizontal, vertical or overhead concrete repair applications and conforms to ASTM C-881 specifi cations. Also available in a paste consistency.
Uses• Structural bonding of concrete, steel, wood, masonry and other materials.• Chemical anchoring for bolts, dowels, pins, etc.• Seal cracks and set injection ports for pressure-injection of concrete cracks.• Pressure-inject cracks for a structural repair of concrete structures.• Mix with aggregate to repair concrete spalls and voids as a non-sag epoxy repair mortar. • Horizontal, vertical and overhead applications.• Interior or exterior applications.
ATLAS HI-MOD EPOXY GELFeatures of Atlas Hi-Mod Epoxy Gel• Excellent bond strength to many materials.• Moisture tolerant to allow for application on both dry or wet surfaces.• Sets quickly for rapid strength gain and load capacity.• Non-sag consistency is ideal for vertical or overhead applications.• High strength, heavy-duty concrete patching material for horizontal, vertical or overhead surfaces.• Cures to a gray color.• Easy to use, low odor, 1:1 mix ratio.• Proven fi eld performance.
Technical Data & Specifi cationsASTM C-881, Types I, II, IV, & V, Grade 3, Classes B & C.Meets USDA specifi cations for use in food processing areas.VOC CompliantSee Product Data Sheet for test results
Atlas Hi-Mod Epoxy Gel is a non-sag viscosity and is ideal for setting injection
ports and cap sealing.
Atlas Epoxy Bonder is a medium viscosity bonding
agent that is easy to broom-apply; ideal for
bonding new concrete to old concrete. Use the LPL Epoxy Bonder for up to an 8 hour open time at 700F!
EPOXY VISCOSITIES
100% Solids, High Strength, Non-Sag Epoxy Gel Adhesive
Structural Epoxy Adhesive, Non-Sag
Packaging Product Code
2 quart kits (2 - 1 quart cans)
2 gallon kits (2 - 1 gal. cans) 30.20.11522
10 gallon kits (2 - 5 gal. pails) 30.20.11527
110 gallon kits (2 - 55 gal. drums)
Material Viscosity in Centipoise (CPS)
Water 1
Milk 3
E-Pro Seal SLV < 50
SAE 10 Motor Oil 85-140
SAE 20 Motor Oil 140-420
Injection Resin 175 175
LV Injection Epoxy 500
SAE 40 Motor Oil 650-900
Castor Oil 1,000
E-Pro Overlay 1,800
Epoxy Joint Filler 2,200
Epoxy Bonder 2,500
Karo Syrup 5,000
LPL Epoxy Bonder 6,500
Honey 10,000
Ketchup 50,000
Sour Cream 100,000
Peanut Butter 250,000
Hi-Mod Epoxy Gel 300,000
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
106
DescriptionAtlas Epoxy Joint Filler is a two-component, 100% solids, self-leveling, high strength, semi-rigid epoxy joint fi ller for industrial concrete fl oors. This moisture tolerant and easy to use joint fi ller provides ultimate support and protection for saw-cut or formed control joints in concrete fl oors that are subjected to hard-wheeled vehicle traffi c.
Uses• Fill and seal control and construction joints (saw-cut or formed) in concrete slabs.• Fill and repair spalls or cracks in concrete fl oors and joint nosings.• New concrete fl oors or joint restoration projects.• Ideal for industrial and commercial fl oors, warehouses, distribution centers, factories, food processing plants, maintenance facilities, parking structures, etc.• Interior applications.
Features of Atlas Epoxy Joint Filler• Protects joint edges from spalling and deteriorating, even when subjected to heavy forklift traffi c.• Low modulus formulation allows for moderate joint movement.• High elongation; will not tear from concrete.• Excellent shock absorption from heavy impact loads.• Resistant to gasoline, oil and most common chemicals.• Moisture tolerant to allow for application on both dry or wet surfaces.• Cures to a concrete gray color.• Easy to use, low odor, 1:1 mix ratio.• No primer necessary.• Self-leveling consistency for simple application.• Will not become brittle over time.• Proven fi eld performance.
Atlas Epoxy Joint Filler is a self-leveling joint sealant that will protect joint edges from spalling & deterioration otherwise caused by forklifts, pallet jacks, etc. Very easy to apply with a
caulking gun and cures to a gray color!
ATLAS EPOXY JOINT FILLER100% Solids, Self-Leveling, Semi-Rigid Epoxy Joint Filler
Read Product Data Sheet & MSDS prior to use.
Technical Data & Specifi cationsASTM C-881: Grade 2, Classes B & C.Meets USDA specifi cations for use in food processing areas.VOC CompliantSee Testing Data Chart for test results
Semi-Rigid EpoxyJoint Sealants
Packaging Product Code
2 gallon kits (2 - 1 gal. cans) 30.28.10022
10 gallon kits (2 - 5 gal. pails) 30.28.10027
110 gallon kits (2 - 55 gal. drums)
Coverage
Also available in a non-sag, pick-proof
formulation for sealing & fi lling control joints
in security applications!
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
107
ATLAS FLEX-THANE 230
ATLAS FLEX-THANE 230 SL
Read Product Data Sheet & MSDS prior to use.
Read Product Data Sheet & MSDS prior to use.
One-Component, Gun-Grade, All-Purpose, Elastomeric Construction Sealant
One-Component, Self-Leveling, Elastomeric Construction Sealant
DescriptionAtlas Flex-Thane 230 is a one-component, non-sag, polyurethane construction sealant that cures to a tough, fl exible, watertight rubber when exposed to moisture present in the atmosphere. This easy-to-use, highly resilient elastomeric material is capable of +/- 25% joint movement, making it ideal for sealing all vertical or horizontal joints that are subject to contraction and expansion. Flex-Thane 230 exhibits excellent adhesion to concrete, wood, glass and metal for many construction applications.
Uses• Caulk and seal expansion and contraction joints, tilt-up panels, precast concrete elements, metal curtain walls, perimeter door and window framing, etc.• Use as an elastic construction adhesive for materials with different coeffi cients of expansion.• Vertical or horizontal applications.• New construction or restoration projects.• Interior or exterior applications.
Features of Atlas Flex-Thane 230• Highly elastic durable sealant capable of 50% joint movement(+/- 25%) with excellent tear-resistance.• Excellent adhesion to concrete, wood, glass and metal.• Strong resistance to chemicals, staining, harsh weather and aging.• Service temperature range of -400 - 1800F (-40 - 820C).• Excels in multiple construction applications.• Proven fi eld performance.• Fast and easy to apply.• Available in many colors.
Technical Data & Specifi cationsFederal Specifi cation TT-S-00230C, Type II, Class A.ASTM C-920 Type S, Grade NS, Class 25, Use NT, M & A.VOC CompliantSee Testing Data Chart for test results
DescriptionAtlas Flex-Thane 230 SL is a one-component, self-leveling, polyurethane construction sealant that cures to a tough, fl exible, watertight rubber when exposed to moisture present in the atmosphere. This easy-to-use, highly resilient elastomeric material is capable of +/- 25% joint movement, making it ideal for sealing all horizontal joints that are subject to contraction and expansion. Flex-Thane 230 SL exhibits excellent adhesion to concrete, wood, glass and metal.
Uses• Caulk and seal expansion and contraction joints, parking decks, pavements, sidewalks, plazas, patios, driveways, malls, or other areas subject to foot and light vehicle traffi c. • Use as an elastic construction adhesive for materials with different coeffi cients of expansion.• Horizontal applications.• New construction or restoration projects.• Interior or exterior applications.
Joint Sealants
Packaging Product Code
10.5 oz. cartridges 30.28.10503
(12 cartridges per case)
20.3 oz. sausages 30.28.10507
(20 sausages per case)
5 gallon pails
Packaging Product Code
30 oz. cartridges (12 cartridges per case) 30.28.11510
5 gallon pails
Features of Atlas Flex-Thane 230 SL• Highly elastic durable sealant capable of 50% joint movement (+/- 25%) with excellent tear-resistance.• Excellent adhesion to concrete, wood, glass and metal.• Strong resistance to chemicals, staining, harsh weather and aging.• Service temperature range of -400 - 1800F (-40 - 820C).• Excels in multiple construction applications.• Proven fi eld performance.• Fast and easy to apply.• Available in many colors.
Technical Data & Specifi cationsFederal Specifi cation TT-S-00230C, Type I, Class A.ASTM C-920 Type S, Grade P, Class 25, Use T, M & A.VOC CompliantSee Product Data Sheet for test results
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
108
ATLAS E-PRO SEAL SLVSuper Low Viscosity, Two-Component, Epoxy Healer/Sealer for Protection of New Concrete or Repair of Concrete Cracks
DescriptionAtlas E-Pro Seal SLV is a two-component, super low viscosity, deep-penetrating, high strength, epoxy sealer designed to protect new concrete and repair deteriorated concrete. E-Pro Seal SLV has a viscosity below 50 cps for maximum penetration into fi ne cracks and pores in the concrete. To seal the concrete surface and prevent the migration of moisture, chlorides, and other harmful contaminants from getting into the concrete and steel reinforcement. E-Pro Seal SLV is an easy-to-use concrete healer & sealer that will prolong the life of concrete struc-tures, such as bridges, parking garages, elevated decks or other concrete elements subjected to harsh weather and chemical attack.
E-Pro Seal SLV may be used to penetrate cracks in concrete decks to fi ll the cracks and seal the surface to protect bridge decks, parking structures or other
elevated decks from moisture, chlorides and other harmful contaminants.
Read Product Data Sheet & MSDS prior to use.
Uses• Penetrate, fi ll and seal concrete cracks in bridge decks, parking structures, or other areas subject to chemical attack, harsh weather and heavy traffi c.• Delamination repair by gravity-feed method.• Consolidation of porous and dusting surfaces.• Interior or exterior, above grade applications. May also be used for slab-on grade in non-freezing climates.
Features of Atlas E-Pro Seal SLV• High-performance and easy to use epoxy resin for structural repairs of concrete decks and slabs.• Protects concrete surface & reinforcing steel from corrosion by resisting the penetration of water, chlorides or other harmful contaminants.• Super low viscosity for deep crack penetration; will penetrate hairline cracks with gravity-feed method.• Excellent bond and tensile strengths.• Fills and binds concrete cracks for structural repairs.• Cures rapidly for minimal downtime of repaired area.• Minimizes future maintenance of treated surface.• Safe and easy to mix.• May be used for interior or exterior applications.
Technical Data & Specifi cations
E-Pro Seal SLV: AASHTO T-259 Chloride Ion Penetration Resistance (90 day ponding) D.O.T. Approvals
See Product Data Sheets for test results
E-Pro Seal SLV is very easy to mix and apply. The two components are completely safe to mix together with a drill & mix paddle and then apply by fl ood coat over the surface with a broom or squeegee. A sand is broadcasted over the treated surface to absorb any material that did not penetrate into the concrete.
Crack Healer / Sealer
Packaging Product Code
E-Pro Seal SLV 2 gallon kits (2 - 1 gal. cans) 30.40.10522
10 gallon kits (2 - 5 gal. pails) 30.40.10527
110 gallon kits (2 - 55 gal. drums) 30.40.10540
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
109
ATLAS E-PRO OVERLAY100% Solids, High Strength, Low Modulus, Low Viscosity Epoxy Binderfor Polymer Concrete Overlays & PatchingDescriptionAtlas E-Pro Overlay is a two-component, 100% solids, high strength, low modulus, low viscosity epoxy binder for concrete patching and overlays. E-Pro Overlay provides a protective and durable polymer concrete repair to concrete bridge decks, parking structures or other areas subjected to heavy traffi c, abrasion, thermal movements and chemical attack. This moisture tolerant epoxy binder cures rapidly for minimum downtime of traffi c areas. E-Pro Overlay conforms to ASTM C-881 specifi cations.
Uses• Concrete bridge deck overlays, parking structures, or other concrete surfaces subject to heavy traffi c, abrasion, thermal movements and chemical attack.• Mix with aggregate for a high strength polymer concrete mortar.• Expansion joint nosing repairs.• Low-modulus bonding agent.• Interior or exterior applications.
Features of Atlas E-Pro Overlay• High-performance and easy to use binder for skid resistant broadcast overlays.• Durable overlay that provides excellent protection from heavy traffi c and abrasion; excellent riding surface.• Low-modulus for excellent shock absorption and thermal movement.• Impermeable to water, de-icing salts (chlorides) and other harmful chemicals. Protects steel reinforcement from corrosion.• High early strength; cures rapidly for minimal downtime of repaired area.• Moisture tolerant before and after cure; allows for application on both dry or damp surfaces.• Minimizes future maintenance of treated surface.• 1:1 component ratio is safe and easy to mix.• Non-fl ammable.• Low odor; may be used for interior or exterior applications.• Provides an attractive fi nish to bridge decks, parking structures, etc.• Proven fi eld performance.
Technical Data & Specifi cationsASTM C-881, Type III, Grade 1, Classes B & C.AASHTO AGC-ARTBA (Taskforce 34)Meets USDA specifi cations for use in food processing areas.VOC CompliantD.O.T. ApprovalsSee Product Data Sheet for test results
Read Product Data Sheet & MSDS prior to use.
After the deck surface is cleaned,Atlas E-Pro Overlay is easily appliedto the deck with a notched squeegee.
After the Atlas E-Pro Overlay is applied, broadcast a clean, hard, angular aggregate to provide good skid
resistance. (See your Atlas representative for aggregate recommendations)
A fi nished bridge lane after being treated withAtlas E-Pro Overlay. The overlay is applied
at approximately 3/8” thick.
Polymer Overlay
Packaging Product Code
2 gallon kits (2 - 1 gal. cans)
10 gallon kits (2 - 5 gal. pails) 30.40.12527
110 gallon kits (2 - 55 gal. drums) 30.40.12540
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
110
ATLAS TECH-DECKTM
Polyester Concrete Overlay & Patch for Bridge Deck Restoration
DescriptionAtlas Tech-DeckTM is high-strength, rapid-setting, water impermeable polyester concrete patch and overlay material for the rehabilitation of concrete bridge decks, parking structures, highways, and other concrete surfaces that are exposed to heavy traffi c, abrasion, harsh weather and chemical attack. Tech-DeckTM is composed of a polyester resin binder and select aggregates to provide a durable wearing surface that is resistant to moisture, chlorides and other chemicals that would otherwise penetrate the concrete and corrode steel reinforcement. Tech-DeckTM cures rapidly, allowing fast return to lane service.
Read Product Data Sheet & MSDS prior to use.
Uses• Concrete bridge deck overlays, parking structures, or other concrete surfaces subject to heavy traffi c, abrasion, thermal movements and chemical attack.• Mix with aggregate for a high strength polymer concrete patching mortar.• Expansion joint nosing repairs.
Features of Atlas Tech-DeckTM
• Provides excellent protection from moisture, chlorides and other harmful contaminants. Protects the concrete and steel reinforcement from corrosion, providing a longer service life for bridges, parking structures, etc.• Superior abrasion and skid resistance to provide a safe and durable riding surface.• Rapid curing to minimize traffi c disruption. Traffi c is returned to lanes within 4 hours of application.• Very dense surface protects bridge deck from extreme wear, including snow chain abrasion/snow plow equipment.• Greater tensile strength and elongation than competitive overlays.• Resilient and shock-absorbing overlay does not crack or delaminate, even through extreme freeze/thaw cycles.• Signifi cantly reduces future bridge deck maintenance and repair costs.• Low viscosity resin is easy to mix, place and fi nish.• Can modify cure time for specifi c jobs and temperatures.• Stronger than portland cement concrete.• Greater bond strength, protection and service life than latex-modifi ed concrete and silica fume concrete.• Provides an attractive fi nish to bridge decks, parking structures, etc.• Proven fi eld performance.• Meets California Air Resource Board (CARB).
Atlas Tech-Seal high molecular weight methacrylate is applied as a primer before placing Atlas Tech-DeckTM.
As shown above, the methacrylate is applied to the clean bridge deck surface with brooms. Contact your
Atlas representative for further information on methacrylate sealers.
Atlas Tech-DeckTM may be placed using a vibrating screed as shown on the left, or with a mobile mixing & paving system as shown above. Specifi c jobsite conditions will determine which application equipment is best suited for a successful placement.
Polyester Concrete & Methacrylate Sealer
/ ATLAS TECH-SEAL HMWMHigh Molecular Weight Methacrylate Primer/Sealer
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
111
ATLAS CONSTRUCTION GROUTNon-Shrink, Non-Metallic, Multi-Purpose Cement-Based Grout
DescriptionAtlas Construction Grout is a blend of portland cement, natural aggregates and special additives to provide a non-shrink, non-metallic, non-corrosive, non-gas forming grout for multiple applications. Construction Grout is a fl owable and pumpable grout that will provide maximum bearing area for proper support and load transfer for column baseplates, precast & tilt-up panels, and other structural grouting applications.This high strength grout may be mixed to a range of consistencies, from dry-pack to fl uid, to provide contractors with a quality, multi-use grout.
Uses• Structural column baseplates.• Machinery, equipment and pump baseplates.• Precast walls and tilt-up panels.• Anchor bolts and dowels.
Features of Atlas Construction Grout• High-strength for load stability.• Non-metallic, will not stain or rust.• Non-corrosive, does not contain calcium chloride.• Non-gas forming.• Versatile grouting, from dry-pack to fl uid consistencies.• Can be molded and shaped.
ATLAS HI-FLOW GROUT
Technical Data & Specifi cationsASTM C-1107, Grade B; CRD C-621 AASHTO T-260Multiple DOT approvals
Compressive Strength (Flowable): 1 day - 2,500 psi 3 days - 4,400 psi 7 days - 5,300 psi 28 days - 6,800 psi
YieldApproximately 0.43 ft3 per 50 lb. bag when mixed with 4.0 quarts of water. At 1” thickness, one 50 lb. bag willcover approximately 5.2 ft2. When one 50 lb. bag is mixed with 4.0 quarts of water & 25 lbs. of 3/8” pea gravel, yieldis approximately 0.61 ft3 .
Read Product Data Sheet & MSDS prior to use.
DescriptionAtlas Hi Flow Grout is a high strength, highly fl uid, non-shrink, non-metallic precision grout composed of specially graded natural aggregates, quality cements and proprietary admixtures. Hi Flow Grout provides high compressive strength for applications ranging from damp-pack to fl uid, and has a long working time to meet diffi cult requirements for the most demanding job conditions. This structural grout is very easy to pump.
Uses• Grouting applications that require precision alignment.• Large, tight clearance areas requiring a highly fl uid pumpable grout to fi ll entire void. • Structural grouting of steel & precast columns & beams.• Machinery, equipment and pump baseplates.• Crane rails.• Grouting anchors, dowels, rods, bolts and inserts.• Grouting post-tension cables and cable anchorages.
Features of Atlas Hi-Flow Grout• High fl uidity for ease of pumping and placing for precise grouting applications.• High compressive strength for dynamic load stability.• Extended working time for easy placement.• Non-metallic, will not stain or rust.• Non-gas forming.• Non-corrosive, does not contain calcium chloride.
Technical Data & Specifi cationsASTM C-1107, Grade B; CRD C-621; AASHTO T-260City of Los Angeles Approved. RR# 25526
Compressive Strength (Flowable): 1 day - 3,700 psi 3 days - 6,200 psi 7 days - 7,100 psi 28 days - 8,300 psi
YieldApproximately 0.45 ft3 per 50 lb. bag when mixed with 4.5 quarts of water. At 1” thickness, one 50 lb. bag will cover approximately 5.4 ft2. When one 50 lb. bag is mixed with 4.5 quarts of water & 25 lbs. of 3/8” pea gravel, yield is approximately 0.63 ft3 .
Read Product Data Sheet & MSDS prior to use.
Non-Shrink Grouts
Packaging Product Code
50 lb. bag (63 bags per pallet) 30.30.10060
Packaging Product Code
50 lb. bag (63 bags per pallet) 30.30.10560
Non-Shrink, Non-Metallic, High Flow, Precision Cement-Based Grout
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
112
ATLAS ULTIMATE HP GROUTDescriptionAtlas Ultimate HP Grout is a high performance, high early & ultimate strength, non-shrink, non-metallic precision structural grout composed of superior natural aggregates, cements and admixtures. Ultimate HP Grout exhibits extremely high compressive strength to permanently support and transfer heavy structural loads. This superior grout may be mixed at any consistency from plastic to fl uid, and it does not contain chlorides or any other corrosive materials.
High Performance, High Early & Ultimate Strength, Non-Shrink, Non-Metallic Cement-Based Precision Grout
Atlas Ultimate HP Grout was an ideal grout for the columns on this roller coaster ride at Sea
World in San Diego, CA. This grout was chosen because of its high fl owability and high early and
ultimate compressive strength.
Uses• Grouting applications that require a high early and/or ultimate compressive strength.• Grouting applications that require precision alignment.• Structural grouting of steel & precast columns & beams.• Machinery, equipment and pump baseplates.• Crane rails.• Grouting anchors, dowels, rods, bolts and inserts.• Power plants, water treatment plants, manufacturing facilities, amusement park rides, or any other heavy repetitive loading applications.
ATLAS N-A GROUT
Features of Atlas Ultimate HP Grout• High early and ultimate compressive strength for less equipment downtime, earlier job completion, and maximum load stability.• Excellent fl uid consistency for ease of pumping and placing for precision grouting applications.• Extended working time for easy placement.• Greater density than other non-metallic grouts.• Resistant to high heat and thermal shock.• Non-metallic, will not stain or rust.• Non-corrosive, does not contain calcium chloride.• Non-bleeding and non-segregating.• Excellent adhesion to concrete and steel.• Can be molded and shaped.
Technical Data & Specifi cationsASTM C-1107, Grades A, B & CAASHTO T-260
Working Time (730F): 20-30 minutesInitial Set Time: approx. 45 minutesCompressive Strength (Flowable): 1 day - 5,000 psi 3 days - 8,500 psi 7 days - 9,300 psi 28 days - 12,000 psi
YieldApproximately 0.43 ft3 per 50 lb. bag when mixed with 4.0 quarts of water. At 1” thickness, one 50 lb. bag will cover approximately 5.2 ft2. When one 50 lb. bag is mixed with 4.0 quarts of water & 25 lbs. of 3/8” pea gravel, yield is approximately 0.61 ft3 .
Non-Aggregate, Highly Flowable, Non-Shrink , Non-Metallic Grout
DescriptionAtlas N-A Grout is a special blend of high quality cements and admixtures to provide a non-aggregate, high fl ow, high strength, non-shrink, non-metallic precision grout. N-A Grout is a unique formulation that may be pumped through extremely tight clearance areas and over large distances. This easy to use grout demonstrates high compressive and fl exural strengths for maximum grout-ing performance. N-A Grout provides high fl uidity and a long working time to meet tough requirements for the most demanding job conditions.Read Product Data Sheet & MSDS prior to use.
Read Product Data Sheet & MSDS prior to use.
Uses• Grouting large, extremely tight clearane areas that require a grout with no sand for high fl uidity and ease of pumping.• Structural grouting of columns, beams and concrete piles. • Grouting anchors, dowels, rods, bolts and inserts. • Grouting post-tension cables, tendons, and cable anchorages.
Non-Shrink Grouts
Packaging Product Code
50 lb. bag (63 bags per pallet) 30.30.11060
Packaging Product Code
50 lb. bag (63 bags per pallet)
3,000 lb. Supersack
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
113
ATLAS TECH PATCH 5
ATLAS TECH PATCH 20
Fast-Setting, Multi-Use, Concrete Patching Material
Fast-Setting, Multi-Use, Concrete Patching Material
DescriptionAtlas Tech Patch 5 is a rapid-setting, ready to use, concrete repair material for general purpose patching and restoration. This portland cement-based patching material is formulated with special hardeners, aggregates and set accelerators to repair, resurface and restore concrete surfaces. Tech Patch 5 may be used for vertical, overhead and horizontal applications, and is easy to shape and shave to match existing concrete surfaces. Tech Patch 5 develops twice the strength of typical concrete and provides good resis-tance to freeze/thaw cycles and weathering.
Uses• Concrete pipe and other precast concrete products.• Patching concrete columns, walls and beams.• Curbs, sidewalks, driveways, steps & manholes.• Large concrete cracks.• Vertical, overhead and horizontal applications.• Interior, exterior, above or below grade applications.• Repairs from featheredge to 1” thick per lift.
Features of Atlas Tech Patch 5• Rapid-setting to provide a quick concrete repair.• High early strength; reaches 4,000 psi in 24 hours.• Smooth “putty-like” consistency; ideal for vertical and overhead applications.• Can be molded, shaped, sanded and shaved.• Can be featheredged (for non-traffi c bearing).• Available in a standard gray or light gray color.• One-component; just add water.
Technical Data & Specifi cationsSet Time (730F): Initial - 5 minutes Final - 20 - 30 minutesCompressive Strength: 1 day - 4,300 psi 3 days - 5,000 psi 28 days - 6,800 psi
YieldApproximately 0.54 ft3 per 50 lb. bagwhen mixed with 3.5 quarts of water.At 1/4” (0.64 cm) thickness, one 50 lb.bag will cover approximately 26 ft2.
DescriptionAtlas Tech Patch 20 is a rapid-setting, ready to use, concrete repair material for general purpose patching and restoration. This portland cement-based patching material is formulated with special hardeners, aggregates and set accelerators to repair, resurface and restore concrete surfaces. Tech Patch 20 may be used for vertical, overhead and horizontal applications, and is easy to shape and shave to match existing concrete surfaces. Tech Patch 20 develops twice the strength of typical concrete and provides good resistance to freeze/thaw cycles and weathering.
Uses• Concrete pipe and other precast concrete products.• Patching concrete columns, walls and beams.• Curbs, sidewalks, driveways, steps & manholes.• Large concrete cracks.• Vertical, overhead and horizontal applications.• Interior, exterior, above or below grade applications.• Repairs from featheredge to 1” thick per lift.
Features of Atlas Tech Patch 20• Rapid-setting to provide a quick concrete repair.• High early strength; reaches 4,000 psi in 24 hours.• Smooth “putty-like” consistency; ideal for vertical and overhead applications.• Can be molded, shaped, sanded and shaved.• Can be featheredged (for non-traffi c bearing).• Available in a standard gray or light gray color.• One-component; just add water.
Technical Data & Specifi cationsSet Time (730F): Initial - 15 - 20 minutes Final - 30 - 40 minutesCompressive Strength: 1 day - 4,000 psi 3 days - 4,900 psi 28 days - 6,500 psi
YieldApproximately 0.54 ft3 per 50 lb. bagwhen mixed with 3.5 quarts of water.At 1/4” (0.64 cm) thickness, one 50 lb.bag will cover approximately 26 ft2.
Read Product Data Sheet & MSDS prior to use.
Read Product Data Sheet & MSDS prior to use.
Concrete PatchingMaterials
Packaging Product Code
50 lb. bag (63 bags per pallet) 30.32.10060
Packaging Product Code
50 lb. bag (63 bags per pallet) 30.32.10560
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
114
DescriptionAtlas Tech-H2 is a polymer modifi ed, cement-based, two-component, fast-setting concrete repair mortar. This high performance structural repair mortar provides excellent durability and superior adhesion for horizontal concrete patching and overlays. Tech-H2 provides excellent workability and is formulated with Ferrolok, a penetrating corrosion inhibitor that helps prevent deterioration caused by chlorides, moisture and other harmful materials. Tech-H2 cures to a concrete gray color to blend with surrounding concrete surfaces and is ideal for areas that are subject to heavy traffi c, abrasion and harsh weather.
Uses• Heavy-duty concrete patching and overlays.• Trowelable or “Form & pour” applications; Adjust H2 liquid polymer to acheive desired consistency. • Horizontal surfaces on, above and below grade.• Structural repair applications such as airport runways, parking garages, warehouse fl oors, manufacturing plants, maintenance facilities, loading docks, walkways, bridges, tunnels, driveways and ramps.• Surfaces subject to freeze/thaw cycles.• Repairs up to 1” neat; up to 4” per lift extended with aggregate. Available in a “H2 Fine” formualtion for easy featheredge application.• Interior and exterior applications.
Features of Atlas Tech-H2• Simple to use, fast-setting, labor saving concrete repair system.• Excellent resistance to heavy taffi c and abrasion.• Fast-setting repair; foot traffi c in less than 2 hours, heavy traffi c in 6 hours.• Easy to trowel and screed.• High early compressive and fl exural strengths.• Does not form a vapor barrier.• Thermal expansion is similar to concrete for maximum service life.• Excellent freeze/thaw resistance.• Pre-measured components. Enhanced with a liquid polymer to improve adhesion and durability.• Formulated with Ferrolok, a penetrating corrosion inhibitor to help prevent future deterioration.• Consistent color match to existing concrete.
Technical Data & Specifi cationsSet Time (730F): Initial - 20 - 30 minutes Final - 45 - 60 minutesBond Strength (28 days): 3,800 psiFlexural Strength (28 days): 2,500 psi Compressive Strength: 1 day - 2,800 psi 3 days - 3,900 psi 7 days - 5,200 psi
ATLAS TECH-H2Two-Component, High Strength, Polymer Modifi ed, Cement Based,Concrete Repair Mortar with an Integral Corrosion Inhibitor
Read Product Data Sheet & MSDS prior to use.
Atlas Tech-H2 is a high strength polymer modifed concrete repair that will withstand extreme traffi c and harsh weather.
It can accept walking traffi c in less than 2 hours of application, heavy traffi c within 4 - 6 hours. Tech-H2
worked excellent for the Marines to repair spalled areas on this military base in Southern California.
Atlas Tech-H2 is very easy to mix and may be placed with a trowel or screed. This versatile repair material may be mixed to different consistencies to suite specifi c project
requirements. Cures to a concrete gray color to blend with surrounding concrete surfaces.
YieldApproximately 0.43 ft3 per unit - 50 lb. bag mixed with 1 gallon of H2 Bond. At 1/4” thickness, one unit will cover approximately 20 ft2 .Extended: Approximately 0.58 ft3 per unit extended with 25 lbs. 3/8” pea gravel. At 1” thickness,one extended unit will cover 7 ft2.
Structural ConcreteRepair Materials
Packaging Product Code
1 gal. jug 30.25.10520
H2 50 lb. bag (63 bags per pallet) 30.32.11060
H2 Fine 50 lb. bag (63 bags per pallet) 30.32.11160
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
115
ATLAS TECH DOT PATCHVery Fast Setting, Heavy-Duty, Flowable Concrete Repair Mortar For Traffi c Bearing Applications
DescriptionAtlas Tech DOT Patch is a fast-setting, heavy-duty, easy to use concrete pavement repair material. This one-component, fl owable concrete patch develops high early strength so repair area has minimal downtime. Tech DOT Patch sets in 15 - 20 minutes and will accept traffi c within 1 - 2 hours. Designed for horizontal, exterior and interior applications, Tech DOT Patch is an ideal repair material for areas subjected to heavy traffi c and freeze/thaw cycles.
Uses• Ideal for patching and repairing concrete highways, bridge decks, parking structures, airport runways, loading docks and warehouse & industrial fl oors.• Flowable mortar for “form & pour” applications.• Full-depth structural repairs from 1/2” - 6” deep. • Grout and anchor dowels, pins and bolts.• Horizontal, exterior and interior applications.
Features of Atlas Tech DOT Patch• Rapid-setting, high early strength. Reaches 3,000 psi compressive strength only 1 hour after set.• Provides a heavy-duty, traffi c-bearing surface.• Provides minimal downtime of repair area. Will be ready for traffi c within 1 - 2 hours of placement.• One-component; just add water.
Technical Data & Specifi cationsMeets ASTM C-928 specifi cation.Set Time (730F): Working - 8 - 10 minutes Final - 15 - 20 minutesCompressive Strength: 1 hour - 3,000 psi 1 day - 5,600 psi 7 days - 6,050 psi 28 days - 8,000 psi
YieldApproximately 0.41 ft3 per 50 lb. bag when mixed with 3.0 quarts of water. At 1” thickness, one 50 lb. bag will cover approximately 5 ft2.Extended: Approximately 0.58 ft3 per unit extended with 25 lbs. 3/8” pea gravel. At 1” thickness, one extended bag will cover approximately 7 ft2.
Read Product Data Sheet & MSDS prior to use.
Packaging Product Code
50 lb. bag (60 bags per pallet) 30.32.12060
ATLAS PRO-1 PATCH
Concrete PatchingMaterials
DescriptionAtlas Pro-1 Patch is a fast-setting, high performance, easy to use structural concrete repair material. This one-component, trowelable concrete patch develops high compressive strength, bond strength and fl exural proper-ties to hold up to heavy traffi c and freeze/thaw cycles. Pro-1 Patch has been designated for exterior horizontal traffi c bearing applications, but also performs well for structural patching of walls, columns, beams or other heavy duty concrete repairs. Pro-1 Patch offers good resistance to oils, de-icing salts and other chemicals to help prevent future corrosion and additional repairs.
Uses• Ideal for patching and repairing concrete highways, bridge decks, parking structures & ramps, airport runways, loading docks and warehouse & industrial fl oors or other heavy duty applications.• Structural repair for walls, columns & beams where a trowable high strength material is required.• Repairs up to 3” deep neat; or add pea gravel for deeper repairs.• Interior, exterior, horizontal and vertical applications.
Heavy Duty, One-Component Structural Concrete Patching Material
Technical Data & Specifi cationsMeets ASTM C-928 specifi cation.Set Time (730F): Working - 14 -16 minutes Final - 28 - 32 minutesCompressive Strength: 3 hour - 3,000 psi 1 day - 5,600 psi 7 days - 6,100 psi 28 days - 7,000 psi
YieldApproximately 0.43 ft3 per 50 lb. bag when mixed with 4.5 quarts of water. At 1/2” thickness, one 50 lb. bag will cover approximately 10 ft2.Extended: Approximately 0.58 ft3 per unit extended with 15 lbs. 3/8” pea gravel. At 3” thickness, one extended bag will cover approximately 2.3 ft2. Read Product Data Sheet & MSDS prior to use.
Packaging Product Code
50 lb. bag (63 bags per pallet) 30.32.12560
Features of Atlas Pro-1 Patch•Develops high early strength. Reaches 3,000 psi compressive strength within 3 hours of set. • Provides a heavy-duty, traffi c-bearing surface.• Allows for minimal downtime; traffi c can be allowed on surface within 2-3 hours.• Excellent bond strength and fl exural properties to provide a long lasting repair that will withstand freeze/thaw cycles and harsh weather environments. • Thermal expansion is similar to concrete for long-term durability and service life.• Cures to a gray color to closely blend with existing concrete.• One-component; just add water.
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
116
DescriptionAtlas E-Pro Patch is a three-component, 100% solids, high strength, low modulus, non-shrink, multi-purpose polymer concrete patching mortar for concrete repair. E-Pro Patch is a convenient pre-packaged repair system that consists of a high quality epoxy resin, curing agent and an engineered blend of graded aggregates to provide a superior concrete patching material. This moisture tolerant epoxy mortar cures rapidly for minimum downtime of traffi c areas. This semi-rigid epoxy formula allows for excellent shock absorption when exposed to heavy traffi c, abrasion and freeze-thaw cycles.
Uses• Concrete patching for bridge decks, parking structures, industrial fl oors, airport runways, loading docks, piers, or other concrete surfaces subject to heavy traffi c, abrasion, thermal movements and chemical attack.• Expansion joint nosing repairs.• Low-modulus concrete repair for spalls.• Interior or exterior applications.
ATLAS E-PRO PATCH100% Solids, High Strength, Low-Modulus, Non-Shrink, Multi-PurposeEpoxy Patching Mortar
Features of Atlas E-Pro Patch• High-performance and easy to use polymer concrete patching mortar.• Durable mortar that provides excellent protection from heavy traffi c and abrasion.• Low-modulus for excellent shock absorption and thermal movement.• Excellent chemical bond to the concrete substrate.• High early compressive and tensile strengths; cures rapidly for minimal downtime of repaired area.• Moisture tolerant before and after cure; allows for application on both dry or damp surfaces.• Withstands freeze/thaw cycles. • More permanent repair than cement-based patches.• Pre-packaged system is safe and easy to mix.• Non-fl ammable.• Low odor; may be used for interior or exterior applications.• Compatible with E-Pro Overlay.• Proven fi eld performance.
Technical Data & Specifi cationsMeets USDA specifi cations for use in food processing areas.VOC CompliantGel Time (60 g mass, 730F): 20 - 30 minutesCompressive Strength: 3 hours - 4,300 psi 1 day - 9,000 psi
Read Product Data Sheet & MSDS prior to use.
ConcreteRepair Materials
Packaging Product Code
0.5 ft3 unit (1/2 Gal A. 1/2 Gal B & 60 lb. bag of aggregate) 30.32.17580
2.0 ft3 unit (1/2 Gal A. 1/2 Gal B & 4 - 60 lb. bags of aggregate) 30.32.17585
Features of Atlas Tech-Top• Self-leveling topping produces a level, hard and traffi c-bearing surface with minimal labor and installation time.• Heavy-duty topping holds up to heavy walking traffi c and vehicle traffi c.• Hardens quickly to provide a walkable surface within 4 hours of application and light traffi c after 24 hours.• Excellent bond strength to properly prepared surfaces.• Easy to mix and place; pumpable.• Cures to a concrete gray color.• Non-shrinking, non-dusting; does not contain gypsum.
Technical Data & Specifi cationsWorking Time (730F): 15 - 25 minutesSet Time: Initial - 60 - 70 minutes Final - 1.5 - 2.0 hoursCompressive Strength: 1 day - 3,100 psi 7 days - 3,500 psi 28 days - 7,200 psi
YieldApproximately 0.43 ft3 per 50 lb. bag when mixed with 4.5 quarts of water. At 1/4” thickness, one 50 lb. bag will cover approximately 21 ft2.Extended: Approximately 0.55 ft3 per unit extended with 15 lbs. 3/8” pea gravel. At 1” thickness, one extended unit will cover approximately 6.5 ft2.
ATLAS TECH-TOP
Read Product Data Sheet & MSDS prior to use.
DescriptionAtlas Tech-Top is a heavy-duty, cement-based, non-shrinking, self-leveling fl oor topping designed to produce a durable, traffi c-bearing surface. This one-component product is a free-fl owing pumpable material that is easy to apply and requires minimal labor and installation time. Tech-Top provides a walkable surface within 4 hours of application and will accept light traffi c after 24 hours. Also available in a white color, which provides an excellent base material for application of concrete stains.
Uses• Produce a level traffi c-bearing fl oor topping over new or existing concrete surfaces.• Level concrete fl oors, ceramic tile, terrazzo and wooden fl oors.• Resurface rough, old, unlevel or poorly fi nished concrete surfaces.• Interior applications.• New or old concrete surfaces.• Ideal for industrial fl oors, offi ces, schools, hospitals, restaurants, and residential fl oor surfaces that will be exposed to traffi c. • Applications from featheredge to 1” neat; up to 4” per lift extended with aggregate.
Self-Leveling Traffi c-Bearing Floor Topping for Interior Applications
Packaging Product Code
50 lb. bag 30.35.11560
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
117
ATLAS TECH-TOP-EXTDescriptionAtlas Tech-Top EXT is a heavy-duty, cement-based, non-shrinking, self-leveling fl oor topping designed to produce a durable, traffi c-bearing surface for exterior or interior applications. This one-component product is a free-fl owing pumpable material that is easy to apply and requires minimal labor and installation time. Tech-Top EXT provides a walkable surface within 4 hours of application and will accept light traffi c after 24 hours.
Uses• Produce a level traffi c-bearing fl oor topping over new or existing concrete surfaces.• Level concrete slabs, ceramic tile, terrazzo and wooden fl oors.• Resurface rough, old, unlevel or poorly fi nished concrete surfaces.• Exterior or interior applications.• New or old concrete surfaces.• Ideal for loading docks, parking decks, garage fl oors, industrial fl oors, patios, walkways, driveways, or other surfaces that will be exposed to traffi c and weather. • Applications from featheredge to 1/2” neat; up to 1-1/2” per lift extended with aggregate.
Features of Atlas Tech-Top EXT• Self-leveling topping produces a level, hard and traffi c-bearing surface for exterior or interior applications.• Requires minimal labor and installation time.• Hardens quickly to provide a walkable surface within 4 hours of application and light traffi c after 24 hours.• Cures to a concrete gray color.• Non-shrinking, non-dusting; does not contain gypsum.
Technical Data & Specifi cationsWorking Time (730F): 15 - 25 minutesSet Time: Initial - 60 - 70 minutes Final - 1.5 - 2.0 hoursCompressive Strength: 1 day - 3,400 psi 7 days - 4,400 psi 28 days - 5,200 psi
YieldApprox. 0.52 ft3 per 50 lb. bag when mixed with 4.0 quarts of water. At 1/4” thickness, one 50 lb. bag will cover approximately 25 ft2. Extended: Approx. 0.62 ft3 per unit extended with 25 lbs. 3/8” pea gravel. At 1/2” thickness, one extended unit will cover approximately 14 ft2.
Self-Leveling Traffi c-Bearing Floor Topping for Exterior Applications
Read Product Data Sheet & MSDS prior to use.
Self-LevelingToppings
Packaging Product Code
50 lb. bag (60 bags per pallet)
ATLAS TECH-TOP MTDescriptionAtlas Tech-Top MT is cement-based polymer modifi ed micro-topping for concrete surfaces. Teck-Top MT is a thinly applied resurfacer that closely resembles the look of natural concrete and will provide a new wearing surface over damaged concrete. Atlas Tech-Top MT is available in 2 grades, MT-F for the fi ne smoother fi nishes, and MT-R for coarser or broom fi nish textures.
Uses• Re-surface concrete that is worn, pitted or spalled. • Traffi c bearing applications.• Exterior or interior applications.• Horizontal or vertical applications.• New or old concrete surfaces.• Ideal for plazas, patios, parking decks, walkways, driveways, garage fl oors, and other residential and commercial concrete surfaces.
Features of Atlas Tech-Top MT• One component, just add water.• Formulated with dry polymers to improve workability and increase bond to substrate.• Withstands foot and light vehicular traffi c.• Fast turn-around, accepts foot traffi c in 2-3 hours and, light vehicular traffi c in 6-8 hours.• Cures to a light gray concrete color.• Will accept concrete stain treatments.• Freeze thaw resistant.• Easy to apply.
Technical Data & Specifi cationsWorking Time (730F): 30 minutesSet Time: Initial - 45 minutes Final - 1.0 hoursCompressive Strength: 1 day - 3,100 psi 28 days - 5,000 psi
YieldApprox. 30-60 ft2 per 40 lb. bag when mixed with 3.0 quarts of water and applied at 1/8” to 1/16” thick.
Concrete Resurfacing Material for Interior or Exterior Applications
Packaging Product Code
50 lb. bag (60 bags per pallet)
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
118
ATLAS TECH-LEVEL PREMIERDescriptionAtlas Tech-Level Premier is a high-performance, cement-based, self-leveling fl oor underlayment designed to produce a smooth, level and hard surface prior to the placement of fl oor coverings. This one-component, non-shrink underlayment exhibits superior fl owability for an extremely easy installation. Tech-Level Premier will reduce labor costs, minimize placement time and produce a new substrate that will quickly accept installation of resilient fl ooring, carpet, ceramic tile, wood fl ooring, or other traffi c bearing coverings. This fast-track underlayment provides a walkable surface within 4 hours of application and will accept fl oor coverings after 14 hours.
Uses• Create a smooth, level and hard surface prior to the placement of fl oor coverings.• Level concrete fl oors, ceramic tile, terrazzo and wooden fl oors.• Resurface rough, unlevel or poorly fi nished concrete.• Interior, above and below grade applications.• New or old concrete surfaces.• Ideal for offi ces, schools, hospitals, restaurants, and residential fl oor surfaces that are to be resurfaced with carpet, tile or other fl oor coverings. • Applications from featheredge to 1” neat; up to 4” per lift extended with aggregate.
Features of Atlas Tech-Level Premier• Produces a smooth, level and hard surface with minimal labor and installation time.• Cures quickly to allow for traffi c in 4 hours, and for placement of fl oor coverings after 14 hours.• Formulated with high performance polymers for improved workability & increased bond strength.• Easy to mix and place; pumpable.• One-component; just add water.• Non-shrinking and non-dusting.• Compatible with most fl ooring adhesives.
Technical Data & Specifi cationsWorking Time (730F): 15 - 20 minutesSet Time: Initial - 30 - 40 minutes Final - 1.0 - 1.5 hoursCompressive Strength: 1 day - 2,600 psi 7 days - 3,800 psi 28 days - 4,500 psi
YieldApproximately 0.51 ft3 per 50 lb. bag when mixed with 4.5 quarts of water.At 1/4” thickness, one 50 lb. bag will cover approximately 24 ft2.Extended: Approximately 0.60 ft3 per unit extended with 15 lbs. 3/8” pea gravel. At 1” thickness, one extended unit will cover approximately 7.0 ft2.
Prior to the application of Atlas Tech-Level Premier, the substrate is primed with an Atlas approved primer, such as Atlas Tech-Bond or Inter-Bond. The primer is easily applied with a
broom and assures a good bond of Tech-Level Premier.
Atlas Tech-Level Premier is a self-leveling material that can be poured from a bucket or placed with a pump. This free-fl owing material requires minimal labor, as the product fi lls low spots to create a level, smooth and hard
surface prior to the placement of fl oor coverings.
Packaging Product Code
50 lb. bag (63 bags per pallet) 30.35.10060
Premium Self-Leveling Underlayment for Interior Applications
Self-LevelingUnderlayment
ChemGrout CG-502 Pumpis available from Atlas on a rental basis.
ChemGrout’s high-effi ciency sprayer/fi nisher is ideal for pouring underlayments or spraying cementitous coatings. The two 45-gallon mixing tanks, large holding hopper and centrally located controls allow continuous production with a single operator. The ChemGrout CG-502 is the perfect choice along with Atlas Tech Level Premier when you
have a large underlayment job!
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
119
ATLAS DURA-MORTARHigh Performance, Flowable, Shrinkage Compensated, StructuralRepair Mortar with an Integral Corrosion Inhibitor
DescriptionAtlas Dura-Mortar is a high-performance, fl owable, dense and resilient concrete repair mortar that exhibits high compressive strength, excellent fl exural proper-ties and superior shear bond strength. This free-fl owing mortar is easy to place, has an extended set time, and is ideal for “form & pour” applications that require deep repairs for deteriorated or spalled horizontal, vertical or overhead surfaces. Dura-Mortar contains Ferrolok, an integral corrosion inhibitor that will reduce corrosion in the repaired area and adjacent concrete to provide a long service life of repair.
Atlas Dura-Mortar was used to repair this 14’ tall x 14” deep void; the application took less than 2 hours, and
forms were stripped the next morning. The surface was then ready to accept waterproofi ng.
Uses• Ideal for patching and repairing concrete bridges, parking structures, highways, airport runways, loading docks, warehouse & industrial fl oors, tunnels, piers, docks and dams.• Free-fl owing mortar for “form & pour” applications or for hard to reach areas.• Areas subjected to heavy traffi c, abrasion, harsh weather or freeze/thaw cycles.• Full-depth structural repairs from 3/4” - 10” deep.
Features of Atlas Dura-Mortar• Very high compressive, fl exural and bond strengths for a high performance structural repair with many applications.• High early strength - reaches 8,000 psi in 24 hours.• Extremely dense material formulated with Ferrolok, a integral corrosion inhibitor to reduce deterioration caused by chlorides, carbon dioxide & contaminants.• Formulated with shrinkage compensating admixtures.• Thermal expansion is similar to concrete for long- term durability and service life.
Technical Data & Specifi cationsMeets ASTM C-928 specifi cation.Set Time (730F): Initial - 35 - 45 minutes Final - 80 - 90 minutesBond Strength (7 days): 4,000 psi Compressive Strength: 1 day - 8,000 psi 7 days - 9,600 psi 28 days - 11,800 psi
Read Product Data Sheet & MSDS prior to use.Packaging Product Code
50 lb. bag (63 bags per pallet) 30.32.15060
ATLAS FEATHER COAT
ConcreteRepair Materials
Cement -Based, Thin Patching Underlayment for Interior Applications
DescriptionAtlas Feather Coat is an innovative, high performance trowelable underlayment that is used as a skim coat to provide a smooth surface and level fl oor prior to the installation of fl oor coverings. This polymer modifi ed material may be used for interior applications on concrete, terrazzo, wood, ceramic tile, VCT and also over non-water soluble cutback adhesives on existing concrete. Feather Coat is fast-drying and will be ready to accept installation of fl ooring materials, such as carpet, tile, VCT & sheet vinyl as soon as patch is dry, which is typically within 15-20 minutes.
Uses• Provide a smooth, hard & level surface over rough, damaged or unlevel concrete prior to the installation of fl oor coverings.• Patch over concrete, terrazzo, wood, tile, VCT or cutback adhesives.• Ideal for fast-track projects where fl oor coverings need to be installed as soon as possible.• Applications from featheredge to 1/4” thick per lift.• Interior applications.
Features of Atlas Feather Coat• High polymer formulation that contains no sand to provide an extremely smooth consistency and excellent workability.• Fast drying to allow installation of fl oor coverings as soon as the patch is dry; typically within 15-20 minutes of application. • True featheredge application up to 1/4” per lift.• Excellent bond strength to concrete surfaces; no primer necessary. • Simple to use one-component; just add water. • Easy to trowel-apply with excellent coverage rates.
YieldApproximately one 10 lb. bag of Feather Coat will cover approximately 33 ft2 at 1/8” thickness. Depending on the condition of the substrate, one bag will typically cover 150-200 ft2.
Packaging Product Code
10 lb. bag 30.32.13551
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
120
Features of Atlas V/O-1 Mortar• Non-sag consistency is easy to place on vertical or overhead surfaces without the use of forms.• High bond strength for excellent adhesion and a successful, long-lasting, durable repair. • High early, compressive, fl exural and tensile strengths.• Formulated with Ferrolock, an integral corrosion inhibitor.• Thermal expansion is similar to concrete for maximum service life.• Withstands harsh weather and freeze/thaw cycles.• Easy to use, just add water.• Consistent color match to surrounding concrete.
Technical Data & Specifi cationsWorking Time (730F): 20 minutesSet Time: Initial - 40-50 minutes; Final - 90-100 minutesCompressive Strength: 1 day - 1,700 psi 7 days - 4,200 psi 28 days - 5,400 psi
YieldApproximately 0.43 ft3 per 50 lb. bagmixed with 9.5 pints of water.At 1/4” thickness, one 50 lb. bag willcover approximately 20 ft2 .
DescriptionAtlas V/O-1 Mortar is a high strength, one-component, polymer modifi ed, cement-based, fast-setting, non-sag, mortar for vertical or overhead structural concrete re-pairs. This high-performance patching material is easily placed on vertical or overhead surfaces without the need for forms to properly repair parking structures, bridge structures, docks, piers, etc. This concrete repair material is specially formulated with Ferrolock, a penetrating corrosion inhibitor that helps prevent future deterioration caused by chlorides, moisture and other harmful materials. V/O-1 Mortar cures to a concrete gray color to blend-in with surrounding concrete surfaces. This durable repair mortar has excellent resistance to harsh weather conditions and freeze/thaw cycles.
Uses• Structurally repair vertical, overhead or horizontal concrete structures. • Ideal for repairing deteriorated concrete in parking structures, water treatment plants, bridge structures, tunnels, dams, docks, piers, ramps, and all concrete pipes, walls, ceilings & columns.• Surfaces subject to freeze/thaw cycles.• Repairs from 1/8” to 2” per lift.• Interior or exterior applications, above or below grade.
ATLAS V/O-1 MORTAROne-Component, High Strength, Polymer Modifi ed Concrete Repairwith a Corrosion Inhibitor for Vertical & Overhead Applications
Read Product Data Sheet & MSDS prior to use.
Concrete PatchingMaterials
Packaging Product Code
50 lb. bag (63 bags per pallet) 30.32.15560
ATLAS STRUCTURAL REPAIR MORTAR V & O
DescriptionAtlas Structural Repair Mortar V & O is a high strength, two-component, polymer modifi ed, cement-based, non-sag, fast-setting concrete repair mortar. This high-performance mortar is easily placed on vertical and overhead surfaces without the use of forms. Structural Repair Mortar V & O is a unique non-shrink formulation that is very durable and will withstand harsh weather conditions and freeze/thaw cycles.
Uses• Structurally repair vertical, overhead & horizontal concrete and masonry surfaces.• Ideal for restoration of parking garages, water treatment plants, bridges, tunnels, dams, docks, piers, concrete pipes, walls, ceilings & columns.• Repairs from 1/8” to 2” per lift.• Interior, exterior, above and below grade applications.
Two-Component, High Strength, Polymer Modifi ed, Cement-Based,Concrete Repair Mortar for Vertical & Overhead Applications
Features of Structural Repair Mortar V & O• Simple to use, fast-setting, labor saving concrete repair system.• Non-sag consistency is easy to place on vertical or overhead surfaces.• Excellent adhesion and high early strength for quick and successful concrete restoration projects. • High early compressive and fl exural strengths.• Thermal expansion is similar to concrete for maximum service life.• Pre-measured components. Enhanced with a liquid polymer to improve adhesion and durability.
YieldApproximately 0.41 ft3 per unit, consisting of one 50 lb. bag mixed with 1 gallon of Structural Repair Liquid polymer. At 1/4” thickness, one 50 lb. bag will coverapproximately 20 ft2.
Read Product Data Sheet & MSDS prior to use.
Packaging Product Code
50 lb. bag & 1 gal. jug 30.32.15860
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
121
Structural ConcreteRepair Materials
DescriptionAtlas Smoothcrete Plus is a specially formulated patching and resurfacing material designed for repairing and restoring concrete surfaces. Excellent for rubbing, smoothing and resurfacing horizontal, vertical or overhead surfaces for thin patching applications. Smoothcrete Plus is a unique blend of portland cement, dry polymers and special additives to provide the ultimate smooth-fi nish patching material. This easy-to-use concrete repair product has excellent bond strength, weather resistance, and provides a bondable surface for paints and coatings.
ATLAS SMOOTHCRETE PLUSSmooth Patching & Resurfacing Material for Concrete Surfaces
Uses• Resurface rough, damaged or discolored concrete and masonry surfaces.• Repair voids, honeycombs, holes, small cracks, etc.• Ideal for patching tilt-up panels and precast concrete.• Provides a smooth and hard surface that may be painted or treated with architectural coatings.• Horizontal, vertical and overhead applications.• Trowelable underlayment for future fl oor coverings.• Applications from featheredge to 1/8” thick.• Interior and exterior applications.
Features of Atlas Smoothcrete Plus• Exceptionally smooth and hard fi nish.• Excellent workability and creamy smooth consistency.• Excellent bond strength.• Simple to use one-component; just add water.• Already contains dry polymers for superior workability, adhesion and durability.• Jobs may be completed more quickly; pre-packaged material is easy and quick to mix and cures rapidly to provide a bondable surface for paints and coatings.• Long bucket life for ease of application.• Easy to shape and sand; minimal to no surface dusting.• Does not contain gypsum.• Moisture insensitive after curing.• Cures to a concrete gray color to blend with surrounding concrete.
Technical Data & Specifi cationsWorking Time (730F): 40 minutesSet Time: Initial - 2 hours; Final - 4 - 5 hoursCompressive Strength: 1 day - 900 psi 3 days - 1,300 psi 7 days - 2,800 psi 28 days - 3,950 psiYieldOne 50 lb. bag will cover approximately100 ft2 at 1/16” thickness.
Read Product Data Sheet & MSDS prior to use.
Packaging Product Code
40 lb. bag (63 bags per pallet) 30.32.16558
ATLAS V/R PATCHExtremely Smooth, High Polymer Resurfacing and Finishing Compound for Vertical Concrete Surfaces
DescriptionAtlas V/R Patch is an innovative, high performance patching and resurfacing material designed to repair concrete surfaces that are rough, damaged or dis-colored. V/R Patch is a high polymer, cement based coating that contains no sand to provide an extremely smooth consistency for easy application and maximum product performance. This surface treatment has excel-lent bond strength and is ideal for rubbing, smoothing and resurfacing vertical or overhead surfaces that have bug holes, voids, spalls, dents, cracks etc. This easy-to-use concrete repair product dies quickly to provide a bondable surface for paints and coatings and provide for fast job completion.
Uses• Provide a smooth and hard surface over damaged, rough or discolored concrete and masonry surfaces.• Repair voids, honeycombs, holes, small cracks, etc. • Ideal for sacking and patching tilt-up panels, precast concrete, concrete walls, columns, beams, etc.• Exposed interior concrete surfaces and exterior surfaces to be painted or coated.• Vertical and overhead applications.• Applications from featheredge to 1” thick.• Interior and exterior applications.
Features of Atlas V/R Patch• High polymer formulation that contains no sand to provide an extremely smooth consistency and excellent workability.• Cure to a concrete gray color for exposed concrete surfaces.• Cures quickly to a hard surface to provide a bondable surface for paints and coatings; jobs may be completed in less amount of time. • Excellent bond strength to concrete surfaces.• Simple to use one-component; just add water.• Eliminates surface dusting and sanding. • Easy to trowel-apply with excellent coverage rates.• Does not contain gypsum.
YieldOne 10 lb. pail will cover approximately 65 ft2 at 1/16” thickness. Depending on the condition of the concrete surface, one pail will typically cover 100-150 ft2.
Packaging Product Code
7 lb. pail 30.32.16050
10 lb. bag 30.32.16051
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
122
Fast-Setting Hydraulic Cement to Plug Water Leaks
ATLAS PLUGDescriptionAtlas Plug is a fast-setting hydraulic cement designed to plug fl uid leaks and stop water seepage in concrete or masonry surfaces. Atlas Plug is a durable, non-corrosive, non-rusting material that is composed of cement and proprietary admixtures. When mixed with water to a putty consistency, Atlas Plug will set in 2-3 minutes and will last the life of the structure.
Uses• Stop water seepage and fl uid leaks through cracks, faults, crevices and holes in concrete and masonry surfaces.• Ideal for concrete pipes, manholes, culverts, storm drains, swimming pools, tunnels, dams, water tanks, sewers, basements, elevator pits, etc. • Underwater applications.• Vertical and horizontal applications.• Interior, exterior, above or below grade applications.
Features of Atlas Plug• Very fast-setting to stop water seepage immediately.• Will last the life of the structure.• Will not shrink, corrode, rust or stain.• Sets under water; just hold in place until set.• One-component; just add water.
Technical Data & Specifi cationsSet Time: Initial - 2 minutes; Final - 3 minutesCompressive Strength: 1 day - 4,000 psi 3 days - 5,100 psi 28 days - 6,500 psi
YieldApproximately 0.50 ft3 per 50 lb. pail
Read Product Data Sheet & MSDS prior to use.
Concrete Patching Materials
Packaging Product Code
50 lb. pail ( 36 per pallet) 30.32.18061
DescriptionAtlas Tech-321 is a specially formulated patching and coating material designed for repairing and restoring concrete surfaces. Formulated with dry polymers, Tech-321 has excellent workability and adhesion to the substrate, and cures to a hard and smooth fi nished surface. Ideal for rubbing, smoothing and resurfacing all horizontal, vertical or overhead concrete surfaces for thin patching and coating applications. Tech-321 is blended with white and gray portland cement, very fi ne aggregates and special additives to provide a smooth fi nish over rough, damaged or discolored concrete. This easy to use, one component product has excellent weather resistance and cures to a concrete gray color to blend with existing surfaces and leave an attractive concrete fi nish.
Uses• Refi nish exposed concrete walls, beams, ceilings, columns, steps, walkways and patios.• Resurface rough, damaged or discolored concrete and masonry surfaces.• Repair voids, honeycombs, holes, small cracks, etc.• Horizontal, vertical and overhead applications.• Applications from featheredge to 1/8” thick.• Interior and exterior applications.
Read Product Data Sheet & MSDS prior to use.
Features of Atlas Tech-321• Provides a smooth and hard surface that cures to an attractive concrete gray color.• Excellent workability and creamy smooth consistency.• Extended working time.• Excellent bond strength.• Simple to use one-component; just add water.• Easy to shape and sand.• Does not contain gypsum.• Moisture insensitive after curing.• Also available in a white color.
Technical Data & Specifi cationsWorking Time (730F): 30 minutesSet Time: Initial - 2 hours; Final - 4 hoursCompressive Strength: 1 day - 900 psi 3 days - 1,450 psi 7 days - 2,900 psi 28 days - 4,150 psi
YieldOne 50 lb. bag will cover approximately100 ft2 at 1/16” thickness.
ATLAS TECH-321Thin patching and Resurfacing Material for Concrete Surfaces
Packaging Product Code
50 lb. bag (63 bags per pallet) 30.32.17060
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
123
Features of Atlas Hydroseal• Excellent waterproofi ng properties to prevent moisture damage.• Out-performs paint-type coatings.• Breathable coating allows moisture from the interior to escape without blistering or peeling the coating.• Provides both positive and negative side protection.• Produces a consistent and uniform appearance.• Add fi ne sand in mix to obtain a desired texture fi nish.• Conceals mortar joints and hides minor surface defects.• Leaves a bondable surface for architectural coatings.• Rapid-setting speeds job cycle.• Excellent durability in freeze/thaw conditions.• Resists chloride/salt penetration.
Technical Data & Specifi cationsCoverageSmooth Surface1st Coat: 150 - 200 ft2 per 50 lb. bag2nd Coat: 300 - 500 ft2 per 50 lb. bag
Rough Surface1st Coat: 100 - 200 ft2 per 50 lb. bag2nd Coat: 200 - 300 ft2 per 50 lb. bag
ATLAS HYDROSEAL
Read Product Data Sheet & MSDS prior to use.
DescriptionAtlas Hydroseal is a cement-based coating material designed to waterproof concrete and masonry surfaces. This protective coating fi lls and seals the pores and voids in the surface to prevent the migration of moisture and withstand mild hydrostatic pressure. Hydroseal is a single component, non-shrink, breathable coating that is available in a concrete gray color.
Uses• Waterproof concrete, block, brick, stone, stucco and other masonry surfaces.• Interior and exterior applications, above & below grade.• Ideal for foundations, basement and retaining walls, water reservoirs, bridges and tunnels.• Positive and negative side applications.
Atlas Hydroseal is easily applied with a soft-bristled broom, brush or trowel to horizontal or vertical
surfaces to seal the pores in concrete and masonry surfaces, effectively preventing the migration of
moisture and mild hydrostatic pressure.
Cement-Based Waterproofi ng Coating for Concrete & Masonry
Cement-BasedWaterproof Coating
Packaging Product Code
50 lb. bag (60 bags per pallet) 30.32.18560
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
124
Uses• Concrete fl oor installations where a more dense and abrasion resistant surface is required. • Ideal for distribution centers, warehouse fl oors, loading docks, maintenance facilities, industrial plants, aircraft hangars, shopping centers, showroom fl oors, hospitals, restaurants, etc.• Concrete surfaces subjected to forklift traffi c, pallet jacks, tool carts or other vehicles and machinery.• Floors where a designated fl atness is specifi ed. • Wherever colorful abrasion resistant fl oors are required.• Interior and exterior applications.
Features of Atlas Tech-Hard• Provides a concrete fl oor with twice the abrasion resistance of normal concrete to prolong the serviceable life of the fl oor.• Reduces surface dusting, spalling and deterioration to minimize maintenance and repair expenses.• Increases density of the surface for greater resistance to liquid penetration and provide for easy cleaning.• Conforms to fl oor fl atness specifi cations.• Non-rusting formulation for interior or exterior use.• Available in many non-fading colors to provide a long- lasting attractive fi nish.• Light Refl ective formulation exceeds 60% refl ectivity to reduce energy costs.• Proven performance.
CoverageCoverage will vary depending on the particular traffi c volume of the surface:Light Traffi c: 0.75 - 1.0 lbs. per ft2
Moderate Traffi c: 1.0 - 1.25 lbs. per ft2
Heavy Traffi c: 1.25 - 1.5 lbs. per ft2
Colored Floors: 1.5 - 2.0 lbs. per ft2
Light Refl ective: 1.5 - 2.0 lbs. per ft2
ATLAS TECH-HARDHigh Performance Mineral Aggregate Dry-Shake Floor Hardener
DescriptionAtlas Tech-Hard is a ready-to-use, high performance, mineral aggregate dry-shake fl oor hardener designed to provide a more abrasion resistant concrete fl oor surface. This non-metallic, non-rusting hardener is a specially blended mixture of portland cement, natural silica quartz aggregate and proprietary admixtures. Tech-Hard may be used for interior or exterior applications and will conform to fl oor fl atness specifi cations. Available in many colors and an energy effi cient light refl ective formulation.
Atlas Tech-Hard is effi ciently applied with a laser spreader (above) or a mechanical spreader (below)
for accurate application rates. This hardener pro-vides a fl oor that has more than twice the abrasion resistance than a standard 4,000 psi concrete fl oor.
ColorsNatural Gray, Light Gray, Battleship Gray, Terra Cotta, Tile Red, Nile Green, Tan, Brown, Black and Light Refl ective (White). See Dry-Shake Floor Hardeners brochure for color samples.
Read Product Data Sheet & MSDS prior to use.
A Complete SystemAtlas offers a complete concrete fl ooring system to provide the toughness, protection and quality appearance that will impress the most demanding users. Five products to achieve a durable and attractive concrete fl oor:
Atlas Tech-Hard - dry-shake fl oor hardener Atlas Finish-Film - evaporation retardant Atlas Quantum-Cure - curing compound Atlas Elite-HS - dustproofer/sealer Atlas Epoxy Joint Filler - joint sealant
Contact your Atlas representative to discuss how this complete concrete fl oor system can benefi t you and your clients.
Dry-ShakeFloor Hardeners
Packaging Product Code
50 lb. bag (60 bags per pallet)
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
125
Read Product Data Sheet & MSDS prior to use.
ATLAS TECH-PLATEDescriptionAtlas Tech-Plate is a ready-to-use metallic dry-shake fl oor hardener designed to provide a more abrasion resistant concrete fl oor surface for heavy traffi c and industrial applications. This heavy-duty hardener is a specially blended mixture of portland cement, well-graded iron aggregates and proprietary admixtures to produce a fl oor surface with 8 times the abrasion resistance over normal concrete. Tech-Plate may be used for interior applications and will conform to fl oor fl atness specifi cations. Available in many colors, including an energy effi cient light refl ective formulation and a non-rusting formulation.
Uses• Concrete fl oor installations where an extremely more dense and abrasion resistant surface is required. • Ideal for manufacturing facilities, assembly plants, aircraft hangars, loading docks, industrial plants, distribution centers, warehouses, etc.• Concrete surfaces subjected to steel wheel traffi c, heavy pin-point loading, forklift traffi c, pallet-jacks, tool carts or other vehicles and machinery.• Floors where a designated fl atness is specifi ed. • Wherever colorful & extremely abrasion resistant fl oors are required.• Interior applications (A non-rusting formulation is available for exterior applications).
Heavy-Duty Metallic Dry-Shake Floor Hardener Features of Atlas Tech-Plate• Provides a concrete fl oor with eight times the abrasion resistance of normal concrete to prolong the serviceable life of the fl oor.• Reduces surface dusting, spalling and deterioration to minimize maintenance and repair expenses.• Increases density of the surface for greater resistance to liquid penetration and provide for easy cleaning.• Conforms to fl oor fl atness specifi cations.• Reduces the wear on forklift tires and other vehicles.• Available in many non-fading colors to provide a long- lasting attractive fi nish.• Light Refl ective formulation exceeds 60% refl ectivity to reduce energy costs.• Proven performance.• Available in a non-rusting formulation for exterior use.
CoverageCoverage will vary depending on the particular traffi c volume of the surface:Heavy Traffi c: 1.25 - 1.5 lbs. per ft2
Colored Floors: 1.5 - 2.0 lbs. per ft2
Light Refl ective: 1.5 - 2.0 lbs. per ft2
Colors of Atlas Tech-PlateNatural Gray, Light Gray, Battleship Gray, Terra Cotta, Tile Red, Nile Green, Tan, Brown, Black and Light Refl ective (White). See Dry-Shake Floor Hardeners brochure for color samples.
This chart shows the depth of wear, in inches, of several fl oor surfaces after 60 minutes of abrasion test-ing, as tested by guidelines of ASTM C-779, Procedure A.
Abrasion Resistance
00.10.20.30.40.50.60.70.8
Iron AggregateTopping
Metallic AggregateHardener: Atlas Tech-
Plate
Mineral AggregateHardener: Atlas Tech-
Hard
10% Silica FumeConcrete
4,000 psi ConcreteTreated with
Penetrating LiquidHardener: Atlas Elite-
HS
4,000 psi Concrete
Dep
th o
f Wea
r (in
ches
)
Dry-ShakeFloor Hardeners
Packaging Product Code
50 lb. bag (60 bags per pallet)
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
126
Unitex Complete SystemsUnitex offers a complete epoxy application system, from the epoxy material to surface ports, mix nozzles, and application guns.
Unitex QualityUnitex epoxies are manufactured under strict quality control requirements to provide contractors with high performance and reliable epoxy materials.
Unitex ApprovalsUnitex epoxies are approved by numerous state D.O.T.s across the country, including Caltrans, Nevada, Arizona and Colorado.Also approved by City of Los Angeles.ICC Report #5000.
Unitex Cartridge EpoxiesPro-Poxy 100 - Low viscosity, high modulus injection resin; 16.5 oz. cartridge.Pro-Poxy 204 - Medium viscosity, high modulus bonding agent & injection resin; 22 oz. cartridge.Pro-Poxy 300 - Non-sag viscosity, high modulus, anchoring gel or injection gel; 10 oz., 22 oz. or 51 oz. cartridges.Pro-Poxy 300 Fast - Fast-setting, non-sag viscosity, high modulus, anchoring gel or injection gel; 10 oz., 22 oz. or 51 oz. cartridges.Pro-Poxy 400 - Extremely fast-setting, non-sag viscosity, high modulus, epoxy acrylate anchoring gel; 5 oz or 28 oz. cartridges.Pro-Flex - Self-leveling, low modulus (semi-rigid) control joint sealant; 22 oz. cartridge.Pro-Flex Gel - Non-sag viscosity, pick-proof, low modulus (semi-rigid) sealant; 22 oz. cartridge.* - All unitex epoxies also available in bulk packaging. Contact your Atlas representative for more information.
Pro-Poxy 300 / Pro-Poxy 300 Fast Anchoring Epoxy:• Permitted for use in wet or damp holes.• Permitted in severe weathering locations.• Freeze/thaw resistant.• Suitable for seismic conditions.• Allowed at close edge distances.• Allowed at shallow embedments.• Low odor.• For both solid and hollow base materials.
EPOXY SYSTEMS
Ports
Pre-Measured Cartridges
Bulk Containers
Static Mixers
Manual & Pneumatic Dispensing Guns
Construction Chemicals
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
127
CHEMICALS &CEMENTITIOUS PRODUCTS
D.O.T. Curing CompoundsDayton Superior manufactures many D.O.T. approved curing compounds for Caltrans, Arizona, Nevada, Colorado and many other states. Clear resins, white resins, clear waxes, white waxes & other special formulations such as poly-alpha-methylstyrene are pre-approved and ready for jobsite use.
Liquid Hardener, Dustproofer & SealerSure-Hard (J-17) - A colorless, odorless water-based solution of reactive chemicals which deeply penetrates concrete surfaces to seal, densify and harden the treated areas. Ideal for concrete fl oors, as it increases the du-rability and abrasion resistance of the surface to protect from heavy traffi c. The treated surface develops an attractive sheen fi nish that resists black tire marks and is easy to clean and maintain.
Sealers & CoatingsSpec Cote - Epoxy fl oor sealer with increased resistance to chemicals and abrasion.Day-Chem Urethane (J-39) - High performance polyurethane fl oor coating with superior resistance to chemicals and abrasion.WeatherWorker WB - Water-based siloxane penetrating water-repellent sealer for exposed concrete surfaces.Silane 20 / 40 WB - Water-based silane penetrating sealer for maximum water repellency on exposed concrete surfaces.
Non-Shrink Grouts & Patching MaterialsDayton Superior manufacturers high quality non-shrink cement-based grouts for many different applications, ranging from dry-pack to highly fl uid consistencies.
Self-Leveling UnderlaymentsLeveLayer ITM - Premium self-leveling underlayment for interior applications.LeveLayer IITM - Self-leveling underlayment for interior ap-plications, lower psi than LeveLayer I.LeveLayer IIITM - Heavy duty self-leveling fl oor topping for interior applications.LeveLayer IVTM - Heavy duty self-leveling fl oor topping for exterior applications.
Dry-Shake Floor HardenersQuartz TuffTM - Non-metallic quartz aggregate hardener.Ferro TuffTM - Metallic iron aggregate hardener.Emery TuffTM - 100% pure emery hardener for an extremely hard, non-corrosive and rust-free concrete fl oor.
Contact your Atlas representative for further information on Dayton Superior chemical & cementitious products.
ConstructionChemicals
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
128
Design-CreteThe Design-Crete System changes normal grayconcrete surfaces into an exceptional architectural design. A combination of colors and special tools permanently imprint newly placed concrete with authentic textures.
The Design-Crete System provides a textured concrete at a fraction of the cost of comparablenatural materials. Detailed stone, brick, wood ortile patterns can be simulated in a variety ofcolors.
Color HardenersColor hardener is a cementitious dry shake material formulated with carefully balanced and blended pigments, uniform and resistant to discoloration. Color hardener increases the density and durability of the concrete surface, reduces dusting, and minimizes maintenance.
Color ReleasesColor release is a pigmented dry powder release for the stamping tools designed to be used when a mottled, antiqued appearance is desired. It is a pigmented bondbreaker, formulated to prevent stamping tools from sticking to the concrete.
Stamping ToolsStamping tools and mats are molded urethane patterns that impart a pattern and texture to colored concrete surfaces. Stamping tools and mats are imprinted in a variety of patterns and textures for creating architectural hardscapes for interior or exterior concrete. Available in rigid, fl exible and texture mats.
Stampable Overlay SystemThe Stampable Overlay System is a stampablecementitious topping for beautifying both interiorand exterior concrete surfaces. When stamped, Stampable Overlay creates a texture that duplicates a wide range of stamp designs, tile, cut stone, slate, brick, cobblestone and many other textures.
DECORATIVE CONCRETE
DecorativeConcrete
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
129
Spray-RiteEnhance the appearance of existing concretesurfaces with the Spray-Rite concretetexturing system. This system can transformplain, damaged, or stained concrete surfacesinto an exciting textured fi nish.
This exclusive Spray-Rite system is based ona high-strength cement coating, specifi callyformulated to resurface existing concrete. Itprovides a durable, easily maintained and permanent color fi nish, engineered to withstand temperature extremes and intensesunshine.
Patina Stain ColorPatina stain is a penetrating reactive stain thatproduces unique color effects in fi nishedconcrete surfaces that simulate naturalshadings and aged appearance of stone or masonry. The color effect is unique to each stained surface and cannot be duplicated with other materials.
Patina Stain may be applied over smoothtroweled concrete, gunite, Design-Crete, Spray-Rite, Stampable Overlay, Integral Color,or most masonry surfaces. The color will notchip, crack or wear off like coatings becausethe stain penetrates and colors both the surface and the substrate.
Integral Color SystemIntegral colors are high purity iron oxide pigments. The pigments easily disperse in theconcrete batch to produce uniform color for ready-mix applications. Integral colors providea uniform color and are UV stable providing excellent fade resistance.
DECORATIVE CONCRETE
DecorativeConcrete
REBARSUPPORTS
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-REB
AR
SU
PPO
RTS
50
-FLA
TWO
RK
A
CC
ESSO
RIE
S60
-PR
ECA
ST
& T
ILT-
UP
70- F
OU
ND
ATIO
NPR
OD
UC
TS80
- TO
OLS
&
PLA
CIN
G
130
REBAR SUPPORT
This lightweight composite slab bolster makes placement of rebar simple and fast. The GTI Slab Bolster is manufactured in 2.5 ft. & 5 ft. lengths and is available in multiple heights, ranging from 3/4” to 4”. The GTI Slab Bolster is the premier slab bolster on the market with the following features: Contains sharp “needles” on bottom of foot to provide excellent stability.Gray color; blends with concrete; also available in black color.Will not rust; continuous corrosion protection, both on job-site and in concrete.Virtually no change in strength in temperatures ranging from 00F to 3000F.Easily snaps together to eliminate overlapping and use of tie-wire.Has 1/8” deep corrugation spaced 1” apart for easy rebar placement.Lightweight and extremely strong.Ideal for elevated slabs, precast vaults, tilt-up panels & more!
The GTI Composite Bar Chair is the ideal reinforcement support for poured-in-place decks, post-tensioned parking decks, tilt-up panels and precast construction. This lightweight bar support offers superior strength and stability, without the worries of rust or bleed marks. Available in multiple heights, ranging from 1/2” to 10-1/4”.Contains sharp “needles” on bottom of foot to provide excellent stability.Gray color; blends with concrete.Will not rust; continuous corrosion protection, both on job-site and in concrete.Virtually no change in strength in temperatures ranging from 00F to 3000F.Lightweight and extremely strong.Available with sand plates for slab on grade applications. Sand plates contain protrusion in center of plate to dig into soil for added stability.
The Mono-Strand Slab-On-Ground Product System from GTI provides a full range of products for the construction of post-tensioned slabs. Post-tensioned slabs are an effective method to support light commercial and residential buildings built on expansive soils. The components of the post-tensioned slab system include ductile cast iron anchors and wedges, pocket formers and intersectional chairs.
Engineered to support the post-tensioning tendons to mid-height of slab, intersectional chairs are typically installed at the intersection of tendons. Available in multiple heights, ranging from 1-1/2” to 7” high.
GTI COMPOSITE SLAB BOLSTER
GTI COMPOSITE BAR CHAIR & HIGH CHAIR
POST-TENSIONED SLAB PRODUCTS
Product Code No.
40.10.00000
Product Code No.
40.20.17000
Product Code No.
40.80.00000
GTI COMPOSITE PC CHAIRThe GTI Composite PC Chair is the ideal reinforcement for precast concrete slabs and wall panels, tilt-up concrete wall panels and elevated slabs. Available in multiple heights, ranging from 1/2” to 12” in 1/4” increments.Gray Color, blends with concrete. Ball on foot is virtually invisible on concrete surface.Designed for maximum aggregate fl ow and concrete consolidation.Will cradle all sizes of reinforcing.Larger stable footprint.
Product Code No.
40.20.19000
REBARSUPPORTS
Serving Concrete Customers Since 1980.
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-R
EBA
R SU
PPOR
TS 50-FLATW
OR
K
AC
CESSO
RIES
60-PREC
AST
& TILT-U
P70- FO
UN
DATIO
NPR
OD
UC
TS80- TO
OLS &
PLA
CIN
G
131www.atlasform.com
METAL SLAB BOLSTERUsed to support lower slab steel from the slab form. Legs are spaced on 5” centers. Available in 3/4” to 3” heights in 5’ lengths and in plastic dipped, bright basic, galvanized or stainless steel protected.
METAL BEAM BOLSTERUsed to support lower beam steel from the soffi t form. Legs are spaced on 2-1/2” centers. Available in 1-1/2” to 5” heights in 5’ lengths. Manufactured in plastic dipped, bright basic and stainless steel protected.
CONTINUOUS HIGH CHAIRProvides support for upper slab steel eliminating the need for carrier bars. Fabricated in 2” to 15” heights in 5’ lengths with legs spaced on 8” centers. Available in plastic dipped, bright basic, galvanized and stainless steel protected.
Special Order
INDIVIDUAL METAL HIGH CHAIRUsed to support upper steel directly or by means of a carrier bar. Available in 2” to 15” heights in plastic dipped, bright basic, galvanized, and stainless steel protected.
METAL BAR CHAIRUsed to support wide spaced light steel in slab construction. Available in 3/4” to 2” heights in plastic dipped, bright basic, galvanized and stainless steel protected.
REBAR SUPPORT
Product Code No.
40.15.00000
Product Code No.
40.15.00000
Product Code No.
40.25.10000
Product Code No.
40.25.30000
REBARSUPPORTS
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-REB
AR
SU
PPO
RTS
50
-FLA
TWO
RK
A
CC
ESSO
RIE
S60
-PR
ECA
ST
& T
ILT-
UP
70- F
OU
ND
ATIO
NPR
OD
UC
TS80
- TO
OLS
&
PLA
CIN
G
132
REBAR SUPPORT
E-Z LOK WHEELSide-Form spacer. Designed for medium to heavy duty projects. Multiple hub diameter for rebar sizes #3 to #6. Wider locking hub eliminates “racking” and will not fall off. Once locked onto rebar, this wheel will not change shape and will always provide uniform cover.
SPACE WHEELSide-Form spacer. Designed to fi t a wide-range of bar and wire mesh sizes. Provides minimal surface contact and is lightweight. Covers from 3/8” to 3”. Meets all requirements and qualifi es as a CRSI Class 1 Bar Support.
E-Z CHAIRMinimal surface contact. Designed for maximum aggregate fl ow and concrete consolidation. Has high load capacity and fi ts up to #8 rebar.
TOWER CHAIRMinimal surface contact. Designed for maximum aggregate fl ow and concrete consolidation. Has high load capacity and fi ts up to #8 rebar. Tower chair straddles bottom rebar mat in double mat applications.
X-CHAIRSupports rebar and mesh with modest surface contact. Cover height from 1/2” to 2”. Meets all requirements and qualifi es as a CRSI Class 1 Bar Support.
POST-TENSION CABLE CHAIRFor post-tension and on grade applications. Cover height from 1 1/2” to 3”. Four posts securely fasten at the intersection of two cables.
Product Code No.
40.35.00000
Product Code No.
40.35.00000
Product Code No.
40.20.00000
Product Code No.
40.20.60000
Special Order
Special Order
REBARSUPPORTS
Serving Concrete Customers Since 1980.
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-R
EBA
R SU
PPOR
TS 50-FLATW
OR
K
AC
CESSO
RIES
60-PREC
AST
& TILT-U
P70- FO
UN
DATIO
NPR
OD
UC
TS80- TO
OLS &
PLA
CIN
G
133www.atlasform.com
REBAR SUPPORT
For precast, elevated slab, tilt wall, post tension, parking garage decks and side form spacer applications. Cover height from 3/4” to 3”. Manufactured in 32” lengths in standard boxes. Can be used individually or snapped together to create any length. Simple to install non-corrosive and lightweight. Meets all requirements and qualifi es as a CRSI Class 1 Bar Support.
Plain dobies come in a number of standard heights, 3/4” to 6”, with many of the dobies offering multiple dimensions to meet various cover requirements and are used primarily for spacing the reinforcement off grade or formwork. They are particularly suited for footing and foundation reinforcement work where heavy concentrations of rebar occur. Meets all requirements and qualifi es as a CRSI Class 1 Bar Support.
Wire dobies are furnished with two 16 gauge wires for attaching to rebar or mesh. Wire dobies can be used in all concrete slab applications and vertical applications as a side form spacer. Meets all requirements and qualifi es as a CRSI Class 1 Bar Support.
COMBINATION DOBIESOn-Grade or Below Grade applications. Designed with multiple heights withina single unit. Standard 4000 strength. Additional strength available. Meets all requirements and qualifi es as a CRSI Class 1 Bar Support.
DOWEL DOBIESOn-Grade or Below Grade applications. Uniquely supports two mats of reinforcement when used with 90 degree bent rebar dowel. Dowel hole made to accept #4 rebar, depth of hole is 1/2” from bottom. Standard 4000 PSI. Additional strength available. Ideally suited for heavy rebar mats on-grade. Meets all requirements and qualifi es as a CRSI Class 1 Bar Support.
ATLAS TIE WIREAvailable in 16 & 16-1/2 gauge, Atlas Tie Wire may be used for multiple jobsite applications, including securing rebar in place. This professional quality soft annealed wire is packaged 20 coils per box. Plastic-coated and galvanized wire available on special order.
STRONGBACK BOLSTER
PLAIN DOBIES
WIRE DOBIES
Product Code No.
40.10.30000
Product Code No.
40.30.00000
Product Code No.
40.30.00000
Product Code No.
40.30.00000
Product Code No.
40.30.00000
Product Code No.
40.70.00000
REBARSUPPORTS
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-REB
AR
SU
PPO
RTS
50
-FLA
TWO
RK
A
CC
ESSO
RIE
S60
-PR
ECA
ST
& T
ILT-
UP
70- F
OU
ND
ATIO
NPR
OD
UC
TS80
- TO
OLS
&
PLA
CIN
G
134
D-50
D-51D-52D-53D-54
DBR COUPLER
DBR SETTING - SPLICE BARS
- Custom Fabricated Product
D-42 BAG TIES
Sold in full bags only.
Length Product Code No. Wt. Lbs.per 100
4” 40.70.20400 6.1
5” 40.70.20500 6.9
6” 40.70.20600 7.8
7” 40.70.20700 8.7
8” 40.70.20800 11.3
12” 40.70.21200 13
Rebar Size Thread Dia. PlainProduct Code No.
Epoxy Product Code No.
Wt. Lbs./ Ea.
#4 1/2” 0.2
#5 5/8” 0.3
#6 3/4” 0.4
#7 7/8” 0.5
#8 1” 0.7
#9 1-1/8” 1.1
#10 1-1/4” 1.7
#11 1-3/8” 2.2
Rebar Size Thread Size Color Code Thread Data
#4 1/2” Clear 13 NC
#5 5/8” Red 11 NC
#6 3/4” Orange 10 NC
#7 7/8” Blue 9 NC
#8 1” Green 8 NC
#9 1-1/8” Red 7 NC
#10 1-1/4” Orange 8 UN
#11 1-3/8” Green 8 UN
Special Order
16 GA. ANNEALED
REBARSUPPORTS
Serving Concrete Customers Since 1980.
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-R
EBA
R SU
PPOR
TS 50-FLATW
OR
K
AC
CESSO
RIES
60-PREC
AST
& TILT-U
P70- FO
UN
DATIO
NPR
OD
UC
TS80- TO
OLS &
PLA
CIN
G
135www.atlasform.com
D-101
D-102
D-103
D-104
D-108
DOWEL-IN (D-1)REBAR SIZES #4 THRU #11
DOWEL BAR SPLICER (DB-SAE)REBAR SIZES #4 THRU #11
D-101
D-102
D-103
D-104
D-108
STRAIGHT DOWEL-IN
90° HOOKED DOWEL-IN
180° HOOKED DOWEL-IN
STRAIGHT DOWEL-IN THREAD BOTH ENDS
HEADED DOWEL-IN
STRAIGHT DOWEL BAR SPLICER
90° HOOKED DOWEL BAR SPLICER
180° HOOKED DOWEL BAR SPLICER
DOUBLE ENDED DOWEL BAR SPLICER
HEADED DOWEL BAR SPLICER
Rebar Size Thread Size
#4 5/8”
#5 3/4”
#6 7/8”
#7 1”
#8 1-1/8”
#9 1-1/4”
#10 1-7/16”
#11 1-9/16”
Rebar Size Washer Dia.
#4 1-7/8”
#5 2”
#6 2-3/8”
#7 2-1/2”
#8 2-1/2”
#9 2-3/4”
#10 3”
#11 3-1/8”
CUSTOM FABRICATED PRODUCT
CUSTOM FABRICATED PRODUCT
REBARSUPPORTS
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-REB
AR
SU
PPO
RTS
50
-FLA
TWO
RK
A
CC
ESSO
RIE
S60
-PR
ECA
ST
& T
ILT-
UP
70- F
OU
ND
ATIO
NPR
OD
UC
TS80
- TO
OLS
&
PLA
CIN
G
136
D-140 STUDRAIL®
Studrail® is a cost effective solution to punching shear at column/slab connections. Studrails reduce congestion around the column connections, while at the same time dramatically reducing labor costs. Studrails are typically used in post tension and reinforced concrete slabs with direct loading on the columns. Drop panels, beams and column capitals may be eliminated to allow effi cient use of fl ying forms. Installation of Studrails in foundations will increase the punching shear capacity at the base of the columns and in the pile caps. This can provide signifi cant reduction in slab thickness and substantial savings in material, excavation and concrete pumping costs. Studrails can also be used in place or hairpins to eliminate congestion in post-tensioned tendon anchorage zones. One Studrail replaces a series of hairpins to provide time, labor and material savings.
STUDRAIL® SPECIFICATIONStudrail® is fabricated with special studs, either studwelded or mechanically crimped to a steel rail.
Material Specifi cations:• Shear Studs - Low carbon steel, C1015 in accordance with ASTM A108.• Yield Strength - 50,000 psi minimum.• Tensile Strength - 60,000 psi minimum.• Elongation in 2” - 20%
SEISMIC PERFORMANCEStudrail® has been extensively tested and proved to withstand seismic movement and maintain connection stability long after other connections systems have failed. Lab test results show that Studrails provide superior ductility and lateral drift capacity compared to other systems.
REBARSUPPORTS
Serving Concrete Customers Since 1980.
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-R
EBA
R SU
PPOR
TS 50-FLATW
OR
K
AC
CESSO
RIES
60-PREC
AST
& TILT-U
P70- FO
UN
DATIO
NPR
OD
UC
TS80- TO
OLS &
PLA
CIN
G
137www.atlasform.com
D-250BAR-LOCK L-SERIES & S/CA SERIES COUPLERS
Meets or exceeds Min. 160% Fy, CAL TRANS Service ICBO Type 1, ICBO Type 2Available in Epoxy and Electro-Galvanized.
Coupler Designation
For Use On Rebar Size
(in. mm)
Product Code No.
Outside Dia (in.)
Length Wt. Lbs. Bolt Qty.
Head Size Nominal Shear Torque
4L #4-13M 40.60.10400 1.3 5.5 1.6 3 0.5 40
5L #5-16M 40.60.10500 1.7 6.3 2.8 3 0.5 80
6L #6-19M 40.60.10600 1.9 8 4.5 4 0.5 80
7L #7-22M 40.60.10700 1.9 9.8 5.5 5 0.5 80
8L #8-25M 40.60.10800 2.2 12.3 9.5 5 0.625 180
9L #9-29M 40.60.10900 2.9 11.5 15.5 4 0.75 280
10L #10-32M 40.60.11000 2.9 14 19.5 5 0.75 410
11L #11-36M 40.60.11100 3.1 16.5 24 6 0.75 410
14L #14-43M 40.60.11400 3.5 19.1 32 7 0.75 410
Coupler Designation
For Use On Rebar Size
(in. mm)
Product Code No.
Outside Dia (in.)
Length Wt. Lbs. Bolt Qty.
Head Size Nominal Shear Torque
4S/CA #4-13M 40.60.10401 1.3 3.9 1.0 2 0.5 40
5S/CA #5-16M 40.60.10501 1.7 4.5 1.8 2 0.5 80
6S/CA #6-19M 40.60.10601 1.9 6.3 3.5 3 0.5 80
7S/CA #7-22M 40.60.10701 1.9 8.0 4.1 4 0.5 80
8S/CA #8-25M 40.60.10801 2.2 10.2 7.6 4 0.625 180
9S/CA #9-29M 40.60.10901 2.9 9.0 11.4 3 0.75 280
10S/CA #10-32M 40.60.11001 2.9 11.5 15.5 4 0.75 350
11S/CA #11-36M 40.60.11101 3.1 14.0 20.5 5 0.75 350
14S/CA #14-43M 40.60.11401 3.5 16.5 26.0 6 0.75 350
18S/CA #18-57M 40.60.11801 4.3 27.1 60.0 10 0.75 475
Meets or exceeds Min. 135% Fy, CAL TRANS Service ICBO Type 1Available in Epoxy and Electro-Galvanized.
The D-250 Bar-Lock S/CA-Series couplers are available in rebar sizes #4 through #18 and exceed 135% of specifi ed yield Grade 60 rebar. S/CA couplers are an approved Caltrans “Service” splice and are recognized by ICC, ACI and most State departments of Transportation. S/CA couplers are available in transition sizes, weldable half couplers and epoxy coated.
The D-250 Bar-Lock L-Series is similar to the Standard Coupler but is designed for use when higher loads are required. L-Series couplers are available in rebar sizes #4 through #14 and exceed 160% of specifi ed yield of Grade 60 rebar. L-Series couplers are approved for use by most state DOTs, are recognized as an ICC Type 2 seismic splice, and meet ACT specifi cations. L-Series couplers are also available in transition sizes, weldable half couplers and epoxy coated.
REBARSUPPORTS
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-REB
AR
SU
PPO
RTS
50
-FLA
TWO
RK
A
CC
ESSO
RIE
S60
-PR
ECA
ST
& T
ILT-
UP
70- F
OU
ND
ATIO
NPR
OD
UC
TS80
- TO
OLS
&
PLA
CIN
G
138
WELDED DOWEL ASSEMBLIESK-4K-5 FOR PROPER LOAD TRANSFER AT EXPANSION OR CONTRACTION JOINTS
MINIMUM SLAB THICKNESS IS 5”.
STATE PAVEMENT DEPTH (IN INCHES) / PART NUMBER DIAMETER OF DOWEL
LENGTHOF DOWEL O/C COATING LB./FT.
6 8 9 10 11 12 13 14 18
AZ AZ9 1-1/4 18 12 EP DWL/PE 7.77
CA CA8CA9 CA10 CA11 CA12
1-1/41-1/2
1818
1212
FULL EP*FULL EP
7.7710.65
CO CO6CO8 CO9
CA10CO11 CO12 CO13 CO14
3/41
1-1/41-1/2
18181818
12121212
EP DWLEP DWLEP DWLEP DWL
3.595.457.72
10.76
NV NV10NV11
NV13
11-3/81-1/2
181818
121212
EP DWLEP DWL
EP DWL/TE
5.549.18
10.73
PLACE PAVEMENT DEPTH (IN INCHES) / PART NUMBER DIAMETER OF DOWEL
LENGTHOF DOWEL O/C COATING LB./FT.
6 8 9 10 11 12 13 15 18
AIRPORT AP12AP15.1AP15.2
AP18
11-1/41-1/21-1/2
19202020
12151818
VARYVARYVARYVARY
5.028.108.1710.30
Dowel Baskets without dowels are available for contraction and expansion joints in slabs 4” to 9” thick. These are fabricated for 3/4”, 1”, or 1-1/4” diameter dowels as required.
Type “D” Contraction Baskets and K-5 Type “D” Expansion Baskets are a standard 10” width.
Tie Bar Assembly is a basket supporting and positioning rebar dowels of various sizes as specifi ed by the owner of the paving. It is commonly used for longitudinal joints in both DOT and commercial applications. Available in plain or epoxy coated.
TIE BAR ASSEMBLYWIRE BASKETS (WITHOUT DOWELS)
*EP DWL = EPOXY DOWELSEP DWL/PE = EPOXY DOWELS WITH PATCHED ENDS FULL EP = COMPLETE EPOXY COATINGTE = COMPLETE TECTYL-505 COATING
PRODUCT CODES BY STATE
PRODUCT CODES FOR AIRPORTS
REBARSUPPORTS
Serving Concrete Customers Since 1980.
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-R
EBA
R SU
PPOR
TS 50-FLATW
OR
K
AC
CESSO
RIES
60-PREC
AST
& TILT-U
P70- FO
UN
DATIO
NPR
OD
UC
TS80- TO
OLS &
PLA
CIN
G
139www.atlasform.com
K-6STAKE FOR DOWEL BASKETS
K-8
K-7SMOOTH DOWEL BARS PLAIN, PAINTED OR EPOXY
DOWEL ALIGNER
To order, specify: type, gauge and length.
Diameters: 1/2”, 5/8”, 3/4”, 1”, 1-1/4”, 1-1/2” 2”.Lengths: 18”, 24”. Other lengths & diameters are also available.CUSTOM FABRICATED PRODUCT
Welded Hook Type Product Code No.
Pieces Per Box
Wt. Lbs.per 100
.306” x 6” long 200 16.0
.306” x 8” long 200 20.0
.306” x 10” long 100 25.0
.306” x 12” long 100 29.0
.306” x 14” long 100 33.0
.306” x 15” long 100 35.0
.306” x 18” long 100 41.0
3/8” x 15” long 100 50.0
1/2” x 18” long 100 100.0
Dowel Size Product Code No.
Wt. Lbs.per 100
Packaging
3/4” 8.0 250
1” 10.0 250
K-11DOWEL CAPS PLASTIC
DescriptionPlastic
Product Code No.
Wt. Lbs. / Ea. Pieces per carton
1/2” x 4” .020 500
5/8” x 4” .031 500
3/4” x 4” .032 500
3/4” x 6” .038 500
7/8” x 4” .045 500
1” x 4” .058 500
1-1/8” x 4” .059 500
1-1/4” x 4” .063 250
1-3/8” x 4” .063 250
1-1/2” x 4” .065 250
Special Order
Special Order
Available in full cartons only.
Special Order
REBARSUPPORTS
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-REB
AR
SU
PPO
RTS
50
-FLA
TWO
RK
A
CC
ESSO
RIE
S60
-PR
ECA
ST
& T
ILT-
UP
70- F
OU
ND
ATIO
NPR
OD
UC
TS80
- TO
OLS
&
PLA
CIN
G
140
DOWEL CAPSK-11
BASKET CLIPK-12FOR DOWEL BASKETS
Welded style Dowel Cap Flanges must be notched back when installing capson dowels in baskets
Crimp Type Sizes
5/8” x 5” 3/4” x 5” 1” x 5” 1-1/8” x 5” 1-1/4” x 5”
Welded Type Sizes
3/8” x 5” 1/2” x 5” 5/8” x 5” 3/4” x 5” 7/8” x 5” 1” x 5”
1-1/8” x 6” 1-1/4” x 5” 1-3/8” x 6” 1-1/2” x 6” 1-3/4” x 6” 2” x 6”
Style Product Code No. Wt. Lbs.
Wrap-Around 8.7
Nail-Down 6.0
REBAR PROTECTIVE COVERS
Cal. OSHA Approval #C1703AG Federal OSHA Spec. #1926.701(b)
Product Coverage Wt. Packaging Product Code No.
PC110 Fits up to #8 bar .55 Lbs 100 per box 40.55.11110
Product Coverage Wt. Packaging Product Code No.
PC-200 Fits #9 bar and over
.72 Lbs 50 per box 40.55.11200
K-13 GROUT/EPOXY RETENTION RINGFOR DOWELS
Dowel Size Product Code No.
Weight Lbs/Ea.
3/8” dia. .014
5/8” dia. .012
1” dia. .016
1-1/4” dia. .018
1-1/2” dia. .024
Special Order
REBARSUPPORTS
Serving Concrete Customers Since 1980.
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-R
EBA
R SU
PPOR
TS 50-FLATW
OR
K
AC
CESSO
RIES
60-PREC
AST
& TILT-U
P70- FO
UN
DATIO
NPR
OD
UC
TS80- TO
OLS &
PLA
CIN
G
141www.atlasform.com
REBAR FABRICATION*PRODUCED IN CO LOCATION ONLY REBAR
Bars are of two minimum yield levels:1. 40,000 psi, Grade 40, ASTM A 615.2. 60,000 psi, Grade 60, ASTM A 706.
ASTM Standard Reinforcing Bars
Bar Size Designation
Area* Sq. Inches
Weight Pounds per ft.
Diameter*Inches
#3 .11 .376 3/8”
#4 .20 .668 1/2”
#5 .31 1.043 5/8”
#6 .44 1.502 3/4”
#7 .60 2.044 7/8”
#8 .79 2.670 1”
Reinforcing Weights According to Area
#3 @ 6” on center each way 1.544# sq. ft. 13.86# sq.yd.
#3 @ 8” on center each way 1.24# sq. ft. 11.16# sq.yd.
#3 @ 9” on center each way 1.078# sq. ft. 9.70# sq.yd
#3 @ 12” on center one way .399# sq. ft. 3.59# sq.yd.
#3 @ 12” on center each way .799# sq. ft. 7.19# sq.yd.
#3 @ 14” on center each way .706# sq. ft. 6.35# sq.yd.
#3 @ 15” on center each way .62# sq. ft. 5.58# sq.yd.
#3 @ 16” on center each way .625# sq. ft. 5.63# sq.yd.
#3 @ 18” on center one way .269# sq. ft. 2.42# sq.yd.
#3 @ 18” on center each way .539# sq. ft. 4.85# sq.yd.
#3 @ 24” on center one way .199# sq. ft. 1.79# sq.yd.
#3 @ 24” on center each way .399# sq. ft. 3.59# sq.yd.
#4 @ 9” on center each way 1.86# sq. ft. 16.74# sq. yd.
#4 @ 12” on center one way .714# sq. ft. 6.43# sq. yd.
#4 @ 12” on center each way 1.43# sq. ft. 12.87# sq. yd.
#4 @ 18” on center one way .482# sq. ft. 4.34# sq. yd.
#4 @ 18” on center each way .964# sq. ft. 8.68# sq. yd.
#4 @ 24” on center one way .375# sq. ft. 3.38# sq. yd.
#4 @ 24” on center each way .75# sq. ft. 6.75# sq. yd.
#5 @ 5” on center each way 5.37# sq. ft. 48.33# sq. yd.
#5 @ 8” on center each way 3.25# sq. ft. 29.25# sq. yd.
#5 @ 9” on center each way 2.891# sq. ft. 26.019# sq. yd.
#5 @ 12” on center each way 2.217# sq. ft. 19.953# sq. yd.
#5 @ 15” on center each way 1.834# sq. ft. 16.506# sq. yd.
#5 @ 18” on center each way 1.45# sq. ft. 13.05# sq. yd.
* Nominal Dimensions
FABRICATED REBAR
*AVAILABLE IN CO LOCATION ONLY
Denver, CO
REBARSUPPORTS
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-REB
AR
SU
PPO
RTS
50
-FLA
TWO
RK
A
CC
ESSO
RIE
S60
-PR
ECA
ST
& T
ILT-
UP
70- F
OU
ND
ATIO
NPR
OD
UC
TS80
- TO
OLS
&
PLA
CIN
G
142
WELDED WIRE FABRIC
ASTM uses the letter “W” to designate smooth wire and the letter “D” to describe deformed wire. there are three widely used styles of fabric namely 4, 6 and 10 gauge. The corresponding W-numbers for smooth fabric are:
4 gauge equals W4.06 gauge equals W2.910 gauge equals W1.4
Welded wire fabric is designated by two number and two letter-number combinations. The fi rst number gives the spacing in inches of the longitudinal wires. The second number gives the spacing of the transverse wires in inches. The fi rst letter-number combination gives the type and the size of the longitudinal wire and the second combination gives the information on the transverse wire.
Common Stock Styles
New Designation(by W-number)
Old Designation(by steel wire gauge)
Product Code No. Weight Approx. per 100 S. F.
SHEETS 7’ X 20’
6 x 6 - W2.9 x W2.9 6 x 6 x 6 x 6 40.53.24606 -
6 x 6 -W1.4 x W1.4 6 x 6 x 10 x 10 40.53.24610 -
SHEETS 8’ X 20’
4 x 4 -W4.0 x W4.0 4 x 4 x 4 x 4 40.53.10404 85
4 x 4-W2.9 x W2.9 4 x 4 x 6 x 6 40.53.10406 62
6 x 6 - W4.0 x W4.0 6 x 6 x 4 x 4 40.53.20604 58
6 x 6 - W2.9 x W2.9 6 x 6 x 6 x 6 40.53.20606 42
6 x 6 - W2.0 x W2.0 6 x 6 x 8 x 8 40.53.20608 29
6 x 6 -W1.4 x W1.4 6 x 6 x 10 x 10 40.53.20610 21
ROLLS 5’ X 150’
6 x 6-W1.4 x W1.4 6 x 6 x 10 x 10 40.53.30610 -
FLATWORKACCESSORIES
Serving Concrete Customers Since 1980.
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
143www.atlasform.com
THE ADJUSTABLE KICKEREDGE FORM BRACING
CURB FORMS
The adjustable kicker eliminates the waste and ineffi ciency of traditional wood bracing.
• Works on any surface including earth, wood, concrete and blacktop.• Adjusts to various slopes and angles.• Attaches easily to either steel or wood forms and makes straighter edges with less work.• Can be reused and moved from pour to pour.
STREET SMARTThe Street Smart Forming System is ideal for applications that include sideways, driveways, curb and gutters, pavements, footings and industrial slabs.
Standard forms available in 10’ lengths, with heights ranging from 4” to 24”.
LVL EDGE FORM
The Atlas LVL EDGE is a revolutionary concrete edge form designed for fl atwork, tilt-up, residential and commercial use. The double laminated fi nger joint panels provide the support and high strength design. The LVL EDGE gives you higher labor effi ciency and lower actual and per pour costs.
The LVL EDGE will also resist deforming, bowing, warping and swelling and is dimension stable as compared to other form boards. Easy to nail and is virtually knot free, the LVL EDGE, produces clean and consistent concrete fi nishes time and time again.
ATLAS LVL EDGECONCRETE EDGE FORM
·1¼” x 3½” ·1¼” x 5½” ·1¼” x 7¼” ·1¼” x 9½”
·1¼” x 117/8” ·1¼” x 14”·1¼” x 16”
Available in these standard sizes:
Product Code No.
50.10.00000
Description Product Code No.
8” Adjustable Kicker 50.15.00108
16” Adjustable Kicker 50.15.00116
FLATWORKACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
144
STEEL STAKES
1/2” x 1” FLAT 3/8” X 1-1/2” FLAT
11/16” SQUARE 3/4” ROUND
1/2” x 1” FLAT3/8” X 1-1/2” FLAT 11/16” SQUARE 3/4” ROUND
Length Product Code No. Wt. Lbs.
12” 50.15.50012 1.74
18” 50.15.50018 2.70
24” 50.15.50024 3.65
30” 50.15.50030 4.61
36” 50.15.50036 5.56
42” 50.15.50042 6.51
48” 50.15.50048 7.47
60” 9.33
Length Product Code No. Wt. Lbs.
12” 1.74
18” 50.15.60018 2.70
24” 50.15.60024 3.65
30” 50.15.60030 4.61
36” 50.15.60036 5.56
42” 6.51
48” 7.47
60” 9.33
Length Product Code No. Wt. Lbs.
12” 50.15.40012 1.24
18” 50.15.40018 1.92
24” 50.15.40024 2.61
30” 50.15.40030 3.29
36” 50.15.40036 3.97
42” 50.15.40042 4.65
48” 50.15.40048 5.33
60” 6.67
Length Product Code No.With Hole
Product Code No.Without Holes
Wt. Lbs.
12” 50.15.23012 50.15.22012 1.24
18” 50.15.23018 50.15.22018 1.92
24” 50.15.23024 50.15.22024 2.61
30” 50.15.23030 50.15.22030 3.29
36” 50.15.23036 50.15.22036 3.97
42” 50.15.23042 50.15.22042 4.65
48” 50.15.23048 50.15.22048 5.33
60” 6.67
FLATWORKACCESSORIES
Serving Concrete Customers Since 1980.
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
145www.atlasform.com
ASPHALT EXPANSION JOINTSA waterproof expansion joint that is the basic joint for almost every type of installation...offers low initial cost, great durability, and is self-sealing. Available in thicknesses of 1/4”, 3/8”, 1/2”, 3/4”, and 1”. Slabs available in 36” and 48” widths and standard lengths of 5’, 6’, and 10’. Pre-cut joints available in any desired uniform widths and standard lengths. Curb and gutter sections and other special shapes and punching for dowels available. Approx. weight: 3 lbs. per square foot based on 1/2” thickness. Meets ASTM D-994 and AASHTO M 33.
FIBER EXPANSION JOINTSSuggested for use on highways, airport runways, and other similar installations where the joint can be sealed with a rubber asphalt joint seal. Available in thicknesses of 1/4”, 3/8”, 1/2”, 3/4”, and 1” . Slabs available in 5’, 10’, 11’, 12’, and 12’6” lengths. Pre-cut in uniform widths and lengths as desired. Special shapes and punching are available. Approximate weight is 1.4 lbs. per square foot based on 1/2” thickness. Meets ASTM D-1751; Federal HH-F-341c, Type 1 and AASHTO M 153-54, Type 3.
CERAMAR EXPANSION JOINTSComposed of a unique blend of isomeric polymers in a very small, closed-cell structure. Gray in color, Ceramar is a lightweight, highly fl exible and resilient material offering recovery qualities of over 99%. This mini closed-cell structure is virtually non-absorbent. It can be wrapped or formed around curved or circular surfaces. Available in thicknesses of 1/4”, 3/8”, 1/2”, 3/4”, and 1”. Slabs available in 48” widths and standard lengths of 10’. Meets ASTM D-1752.
GRAY SPONGE RUBBER EXPANSION JOINTSIdeal for use where joint is visually exposed and complete resiliency is essential...fully compressible with recovery rate of 95% or more of original thickness. Sizes: thicknesses of 1/4”, 3/8”,1/2” 5/8”, 3/4”, and 1”, widths 2” to 48”, and lengths of 5’ and 10’. Approximate weight is 1.85 lbs. per square foot based on 1/2” thickness. Meets ASTM D-1752, Type 1 Federal HH F 341c, Type 2, Class A, and AASHTO M 153-54, Type 1.
CORK EXPANSION JOINTSMolded of selected cork granules with a resin binder. Use where it is essential that joints are kept fi lled at all times, such as in sewage plants, fl ood walls, fi ltration plants, etc. Resilient, will compress without extrusion and recover to 95% of original thickness. Sizes: thickness, 1/4”, 3/8”, 1/2”, 3/4”, and 1”; widths 2” to 36”; and lengths of 5’ and 10’. Meets ASTM D-1752, Type 2; Federal HH-F-341c, Type 2, Class B.
SELF-EXPANDING CORK EXPANSION JOINTSFormed and compressed under heat and pressure to permit expansion up to 140% of original thickness after installation which permits the fi ller to compensate for concrete shrinkage. Normal humidity conditions after installation activate the self-expanding properties of the cork. Sizes: thicknesses, 1/2”, 3/4”, and 1”. Meets ASTM D-1752, Type 3; Federal HH-F-341c, Type 2, Class C; AASHTO M-153-54, Type 3.
EXPANSION JOINT FILLERSExpansion Joint
Product Code No.50.50.00000
FLATWORKACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
146
SCREED PADS AND POSTS
HEADER FORM SUPPORT
SCREED BRACKET
SCREED BRACKET
G-28
G-29
FOR 3/4” DIA. ROUND STAKES
Used for supporting headers on 3/4” round screed post. Nail support bracket to header. Set screw fi rmly clamps against screed post.
1/2” tapped post fi ts threaded sections of screed pad. 1/4” and 3/8” screed posts also available. Sizes include 9”, 12”, 15”, 18”, 21” & 24”.
For wood forms or decking. 3/4” round stock.
Screed Pad
PLASTIC ZIP STRIP JOINT FORMER
Screed Size Product Code No. Wt. Lbs.per 100
Packaging
2 x 4 Lumber 50.15.10001 66.6 100 per carton
1/2 x 2 Iron Bar 54.1 100 per carton
FOR 3/4”DIA. SQUARE STAKES
Screed Size Product Code No. Wt. Lbs. per 100 Packaging
2 x 4 Lumber 50.15.10001 63.9 100 per carton
Product Code No. Wt. Lbs.
50.15.01010 1.0 Each
Length Product Code No.
1” 50.55.30100
1-1/2” 50.55.30150
2” 50.55.30200
Product Code No.
50.16.20000
Tapped Screed Post
Product Code No.
9” 50.15.21009
12” 50.15.21012
15” 50.15.21015
18” 50.15.21018
24” 50.15.21024
36” 50.15.21036
Screw Point Screed Post
Product Code No.
9” 50.15.20009
12” 50.15.20012
15” 50.15.20015
18” 50.15.20018
21” 50.15.20021
24” 50.15.20024
30” 50.15.20030
36” 5015.20036
50.55.1005050.55.10020
REMOVABLE CAP STRIPS
50.55.10030 50.55.10040
FLATWORKACCESSORIES
Serving Concrete Customers Since 1980.
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
147www.atlasform.com
G-34
G-33SCREED KEY
LOAD KEYSTAKES NOT INCLUDED (SEE G-37)
STAKES NOT INCLUDED (SEE G-37) 24 GA. MATERIAL
Standard Packaging3-1/2” Screed Key 40 bundles of 100 ft. per skid of 4,000 ft.4-1/2” Screed Key 40 bundles of 100 ft. per skid of 4,000 ft.5-1/2” Screed Key 30 bundles of 100 ft. per skid of 3,000 ft.Available only in full packages of 100 ft.
Standard Packaging7-1/2” Load Key 20 bundles of 100 ft. per skid of 2,000 ft.9-1/2” Load Key 20 bundles of 100 ft. per skid of 2,000 ft.Available only in full packages of 100 ft.
STAKE FOR SCREED KEY AND LOAD KEY G-37
REMOVABLE PLASTIC CAP STRIP G-35
Standard Packaging12” Stakes 60 cartons of 100 per skid of 6,000 pieces.15” Stakes 60 cartons of 100 per skid of 6,000 pieces.18” Stakes 48 cartons of 100 per skid of 4,800 pieces.24” Stakes 40 cartons of 100 per skid of 4,000 pieces.
Slab Thickness Actual Height Product Code No.
Wt. Lbs. per 100 LF
4” 3-1/2” 50.16.10004 37.0
5” 4-1/2” 50.16.10005 45.0
6” 5-1/2” 50.16.1006 54.0
Slab Thickness Actual Height Product Code No.
Wt. Lbs. per 100 LF
8” 7-1/2” 50.16.10108 71.0
10” to 12” 9-1/2” 50.16.10110 86.0
Product Code No. Wt. Lbs. Per LF
50.16.15110 .060
Length Product Code No. Wt. Lbs. per 100
12” 50.16.11012 22.0
15” 50.16.11015 27.0
18” 50.16.11018 33.0
24” 50.16.11024 43.0
FLATWORKACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
148
E-1 RISER FRAMES, STANDARD
E-2 RISER FRAMES
E-3 RISER FRAMES
E-7 CUT WASHER
SLOPING SLAB
FOR SLAB ON FILL
D-15 PAPER TUBING
Size Wt. Lbs.
“H” height 15” max 93.0
Size
“H” height 15” max
Size
“H” height 15” max
“W” width 18” max
Bolt Dia. Dimension Plain Product Code No.
Galvanized Product Code No.
Wt. Lbs.per 100
1/2” 1-3/8” x 3/32” 20.30.80704 4.4
3/4” 2” x 5/32” 20.30.80504 10.3
1” 2-1/2” x 3/32” 20.30.80304 16.7
1-1/4” 3” x 3/32” 20.30.80204 21
1-1/2” 20.30.80104
Nominal Tube Dia.
Product Code No.
Wt. Lbs.per 100
Approx. Ft. per Box
3/8” 40.45.28012 2.6 500
1/2” 40.45.27012 4.7 400
5/8” 40.45.26012 5.7 300
3/4” 40.45.25012 6.4 200
1” 40.45.23012 7.5 100
Special Order
Special Order
Special Order
FLATWORKACCESSORIES
Serving Concrete Customers Since 1980.
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
149www.atlasform.com
EXPANDED POLYSTYRENE
4’ x 8’ Sheets
Thickness Product Code No.
1/2” 50.30.10050
3/4” 50.30.10075
1” 50.30.10100
1-1/2” 50.30.10150
2” 50.30.10200
2-1/2” 50.30.10250
3” 50.30.10300
3-1/2” 50.30.10350
4” 50.30.10400
5” 50.30.10500
6” 50.30.10600
ENERYTSYLOPDEDNAPXEFOSEITREPORPLACISYHPseitreporP stinU tsetMTSA )fcp(ytisneD
0.1 5.1 0.2
F04taeulaVRF57ta
1.48.3
F04taytivitcudnoClamrehTF57ta
)rh(/UTB)ni/F()tfqs( 771C
42.062.0
22.042.0
12.032.0
noisnapxelamrehtfotneiciffeoC )F()ni(/ni 696D 530000.0 530000.0 530000.0
evitceffEsuounitnoc-erutarepmet
tnattimretniegnarFF
--
761otpu081xam
761otpu081xam
761otpu081xam
htgnertsnoisserpmoCnoitcelfed%01 isp 1261D 71-31 72-12 83-03
htgnertslaruxelF isp 302C 53-82 06-04 09-06
ytirallipaC - - enon enon enon
noissimsnartropavretaW nimrep 553C 0.3-2.1 7.1-8.0 2.1-6.0
)emulovyb(noitprosbaretaW % 272C 2nahtssel 5.1nahtssel 0.1nahtssel
tnemecdnaltroP-htgnertsdnoBretsalpmuspyg)raehsni(
fspfsp
--
038035
038035
038035
NOITACIFISSALCDRAZAHERIF
daerpSemalFdetubirtnoCleuF
depoleveDekomS
ssenkcihT"450
053-052
ssenkcihT"150
58-05
FLATWORKACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
150
TRENCH DRAIN SYSTEMS
300 SERIES GRATE
400 SERIES GRATE
500 SERIES GRATE
Non-Metal Grates
Product Code No.
Proof Load PSI
Material Length (in.)
Wt. Lbs. Locking Device
2336 15 Termoplastic Heel-proof 19.60 1.1 2840.25A
Perforated Heel-Proof Grates
Product Code No.
Proof Load PSI
Material Length (in.)
Wt. Lbs.
Locking Device
2410 15 Galvanized Steel 39.19 6.0 2810A
2452 15 18-8 Stainless Steel 39.19 6.0 2840A
2486 15 Brass 39.19 8.0 2892A
Reinforced Perforated Heel-Proof Grates
Product Code No.
Load Class
Material Length (in.)
Wt. Lbs.
Locking Device
2412 A-B Galvanized Steel 39.19 8 2810A
2454 A-B 18-8 Stainless Steel 39.19 8 2840A
Load Class A-B-C perforated grating availabel on special order basis.
Slotted Steel Grates
Product Code No.
Proof Load PSI
Material Length (in.)
Wt. Lbs.
Locking Device
2420 150 Galvanized Steel 39.19 6.0 2811A
2440 150 18-8 Stainless Steel 39.19 6.0 2841A
Reinforced Slotted Steel Grates
Product Code No.
Proof Load PSI
Material Length (in.)
Wt. Lbs.
Locking Device
2422 300 Galvanized Steel 39.19 8.0 2811A
2442 300 18-8 Stainless Steel 39.19 8.0 2841A
2442.19 300 18-8 Stainless Steel 39.19 8.0 2841A
410 422420
502 504
Ductile Iron Solid Cover
Product Code No.
Proof Load PSI
Material Length (in.)
Wt. Lbs.
Locking Device
2501 300 Ductile Iron 19.6 12 2811B
*501 cover is also compatible with the 510 frame
Slotted Grates
Product Code No.
Proof Load PSI
Material Length (in.)
Wt. Lbs. Locking Device
2502 300 Ductile Iron 19.6 8 2811B
2503 600 Ductile Iron 19.6 11 2811B
Longitudinally Slotted Grates
Product Code No.
Proof Load PSI
Material Length (in.)
Wt. Lbs.
Locking Device
2504 600 Ductile Iron 19.6 10.0 2811B
Ornamental Ductile Iron Gate
Product Code No.
Proof Load PSI
Material Length (in.)
Wt. Lbs.
Locking Device
2505 300 Ductile Iron 19.6 10 2811B
2506 300 Ductile Iron 19.6 7 2811B
313
530 Frame & Grate Assemblies
Product Code No.
Proof Load PSI
Material Length (in.)
Wt. Lbs.
Locking Device
2532 600 Gray iron (class 30) and 502 style
19.6 30 2815F
2534 600 Gray iron (class 30) frame and ductile iron longitudi-
nally-slotted grate
19.6 25 2815F
510 MFFAF Fabrication/End Frame
Product Code No.
Load Class
Material Length (in.)
Wt. Lbs. Locking Device
2510MFFAF N/A Ductile Iron 19.6 9.0 N/A
Note: One is required at each end run, one at each tee, two are required at 90° turn.
Special Accessories
Product Code No.
Material Length (in.)
Wt. Lbs.
2498.04SS Stainless Steel Heavy Duty Frame 39.19 19.0
2459 Stainless Steel Overlay Rails 39.19 1.5
FLATWORKACCESSORIES
Serving Concrete Customers Since 1980.
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
151www.atlasform.com
TRENCH DRAIN SYSTEMS
700 SERIES GRATE
510AF Frame & Grate Assemblies
Product Code No.
Load Class Material Length (in.)
Wt. Lbs.
Locking Device
2511AF 300 Ductile iron frame and 501 19.6 21.0 2815B
2512AF 300 Ductile iron frame and 502 19.6 15.0 2815B
2513AF 600 Ductile iron frame and 503 19.6 18.0 2815B
2514AF 600 Ductile iron frame and 504 19.6 17.0 2815C
2515AF 300 Ductile iron frame and 505 19.6 17.0 2815B
2516AF 300 Ductile iron frame and 506 19.6 11 2810AXL
512AF505 510MFF532
722720Vinyl Ester FRP Slotted Grates
Product Code No.
Proof Load PSI
Material Length (in.)
Wt. Lbs.
Locking Device
2720 150 Vinyl ester (bars on 1” centers)
39.19 4.0 2887
2722 300 Vinyl ester (bars on 0.6” centers)
39.19 6.0 2887
Ornamental ADA Heel-Proof Grate/Frame
Product Code No.
Proof Load PSI
Material Length (in.)
Wt. Lbs. Locking Device
2564 600 Ductile Iron 19.6 12 N/A
All ductile iron grates and frames available with galvanized coating. All ductile and cast grates have compatible anchor frames.
Cross-Sectional ViewChannel With In-Lay Type Grate
Cross-Sectional ViewChannel Frame And Grate
FLATWORKACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
152
TRENCH DRAIN SYSTEMS
All runs should terminate withnos. 050, 100, 150, 200, 250,300 or any non-sloping chan-nel (nos. 021, 091, or 291) atoutlet or deep end. Any chan-nel may serve as shallow end.
Non-sloping channel locations - All have 100 mm (4”) and 150 mm (6”) vertical outlet.
The PolyDrain Trench Drain System consists of 30 interlocking channels, each one meter (39.19”) long. Special non-sloping channels can be inserted at specifi ed intervals in order to extend channel runs. Catch basins, horizontal outlet plates, closed end plates and vertical outlet plate adapters can be installed at designated locations. Closed end plates terminate channel runs. NOTE: Always begin at the appropriate outlet channel, working towards the shallow end.
Trench Drain Product Code No.
50.40.00000
FLATWORKACCESSORIES
Serving Concrete Customers Since 1980.
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
153www.atlasform.com
W.R. Meadows Vapor Retarders
There are two vapor retarder specifi cations with very different performance requirements:
1) ASTM E-1745 Class A, B, and C for underslab plastic fi lm vapor retarders: PERMINATOR™ 10 mil - 3,000 sq. ft. rolls; 15’ x 200’ PERMINATOR™ 15 mil - 2,400 sq. ft. rolls; 12’ x 200’
2) ASTM E-1993, the more stringent (lower perm rating) specifi cation for critical area use: PREMOULDED MEMBRANE® VAPOR SEAL withPlasmatic® Core. - Underslab Vapor Barrier - 0.0011 perm rating Seven-ply, weather coated, permanently bonded, semi-fl exible bituminous core board. Provides a positive, easy to install, economical, true vaporproofi ng and waterproofi ng system for horizontal applications. The product is the ultimate when a true vapor seal is required. Helps meet and maintain the maximum slab moisture transfer rate of 3 lbs./1,000 sq. ft./24 hours, allowed by the fl ooring industry specifi cations.
VAPOR RETARDERS
Fortifi ber Vapor Retarders
Moistop® UnderslabWith a water vapor permeance of less than .30 perms, Moistop® Underslab exceeds ASTM E-1745 requirements for water vapor permeance, providing an extremely effective barrier to moisture vapor transmission through concrete slabs. Packaging: 2,000 sq. ft. rolls (96” x 250’); 4.2 lbs. per 100 sq. ft. Thickness is 12 mils.
Moistop Ultra® The Moistop Ultra family represents a new generation of concrete underslab products designed to provide incredible durability on the jobsite and lasting protection against moisture. With a water vapor permeance of .02 perms and a tensile strength and puncture resistance that outperforms even thicker membranes, Moistop Ultra 15, Ultra 10 and Ultra 6 exceed all ASTM E-1745 standards for Class “A”, “B” and “C” underslab vapor retarders.
Packaging:Ultra 15 - 1,440 sq. ft. rolls (144” x 120’); 7.3 lbs. per 100 sq. ft. Thickness is 15 mils.Ultra 10 - 3,000 sq. ft. rolls (15’ x 200’); 4.8 lbs. per 100 sq. ft. Thickness is 10 mils.Ultra 6 - 3,000 sq. ft. rolls (240” x 150’); 2.8 lbs. per 100 sq. ft. Thickness is 6 mils.
Moistop® TapeMoistop Tape’s excellent adhesive properties help assure tight joints and smooth underslab installations while maintaining the vapor retarding characteristics required by ASTM E-1745 specifi cations.Available in 4 inch wide x 108 foot rolls. The Boot™The Boot is engineered to help in the installation of underslab vapor retarders around pipes. It makes in-stallations easier while maintaining the integrity of the vapor retarding layer and jobsite durability. Its unique design makes sealing around pipes, conduits and other penetrations of any size quick and easy.
Vapor Retarders Product Code No.
50.60.00000
FLATWORKACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
154
MOISTURE RETAINING COVERS
TRM Weather-All Polyethylene
White polyethylene fi lm available in 4 mil thickness. ASTM C-171 for curing concrete
Poly Burlap
Combination of 10 oz. burlap and 5 mil white opaque polyethylene. ASTM C-171 for curing concrete
Clear polyethylene fi lm available from1 mil to 20 mil thickness. ASTM E-96 for water vapor permeance ASTM C-156 for moisture retention ASTM E-154 for use as vapor retarders
Synthetic Burlene
Combination of synthetic burlap alternative and reinforced polyethylene cover. ASTM C-171 for curing concrete
Polyethylene Film Product
Code No.50.62.00000
Curing Blankets &
Burlap Product
Code No.50.65.00000
McTech EZ CoverEZcoverTM is a natural colored cellulose fabric designed to help protect slab-on-grade or other fl ooring during the construction process. The product is available in standard width 8’ rolls weighing approximately 100 lbs each with each roll covering approximately 400 square feet on application. Property Value ASTM Test Method
Basis Wt. 1200 g/sm ASTM D-2103Caliper 3.18mm ASTM D-5199Tensile TD-8100psi
MD-8800psiASTM D-882
Dart 2300g ASTM D-1709Refl ectance 81% ASTM E-1447
UltraCure NCFTM / Ultracure SUNTM
UltraCure NCFTM and Ultracure SUNTM are moisture-retaining coverings that are natural colored cellulose fabrics with a 3 mil clear (NCF) or refl ective (SUN) impervious coating applied to one side. Ultracure SUNTM has a non-perforated refl ective vapor barrier coating designed to help provide protection against UV degradation. Both non-staining fabrics have a tensile strength meeting ASTM D-882 and a mimimum retention capacity of 6.5(g). Material shall meet or exceed ASTM C171-03, ASTM C171-97a and AASHTO M171-00, standard specifi cations for sheet material for curing concrete slabs or pavement.
Property Value ASTM Test MethodBasis Wt. 151 g/sm ASTM D-2103Caliper 1.4 mm ASTM D-5199
Tensile TD MD
4783 psi4900 psi
ASTM D-882
Elongation TD MD
721%622%
ASTM D-882
Elmendorf TD MD
1500 g350 g
ASTM D-1992
Dart 300 g ASTM D-1709Refl ectance 96% ASTM E-1447
UltraCureDOTTM
UltraCureDOTTM features super absorbant fi bers that effectively trap water and serve as a hydrating reservoir for the slab as it cures. UltraCureDOTTM also features a perforated white refl ective poly backing which provides constant visual reinforcement that the slab remains wet for the entire curing period. With proper installation, UltraCureDOTTM provides constant hydration and maintains a 100% relative humidity condition on the slab for the entire 14 day curing period.
• Superior Hydration• Increased cured concrete strength• User Friendly • Cost Effective• Green- LEED’s points & recyclable• Greater blanket wind resistance
Product Description
Product Code No.
Packaging
UltraCure DOT 50.65.30100 8’ x 100’ roll
Product Description
Product Code No.
Packaging
UltraCure NCF 50.65.31200 8’ x 200’ rollUltraCure SUN 50.65.33200 8’ x 200’ roll
Product Code No.50.66.30050
FLATWORKACCESSORIES
Serving Concrete Customers Since 1980.
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
155www.atlasform.com
NON-SLIP FINISH
SPEED DOWEL SPEED DOWEL is a slip dowel installation system that:
• Minimizes differential settlement at construction joints. • Allows unobstructed contraction and expansion of concrete slabs. • Helps reduce cracking and spalling at construction joints. • Reduces time required for form board removal between slabs.
Emery Non-Slip
Emery Non-Slip is a hard, non-slip aggregate comprisedof 100% pure emery. Emery is a natural occurring mined material that is extremely hard, tough and abrasion resistant. Emery Non-Slip is completely non-corrosive and rust free, for inside and outside use.
E-Z FORM DOWELThe EZform™ Dowel System was designed to save concrete contractors time and money while simplifying the process of creating large slabs-on-grade, and other concrete fl oors where joint forming and load transfer is critical. The system consists of patent pending elements including:the reusable EZform™ board, the EZdowel™ load transfer plate dowel, EZedge™, and the EZbasket™.
The EZform System saves owners and contractors money by eliminating many costly on-site labor tasksassociated with large SOG projects.
Eliminated tasks:• On-site sawing to create chamfer• Measuring for dowel holder alignment• Nailing dowel holders• Repairing crushed or paste fi lled dowel holders
Product Description
Product Code No.
EZ Form 4” x 16’ 50.11.16040EZ Form 51/2” x 16’ 50.11.16055
EZ Form 6” x 16’ 50.11.16060EZ Dowel 1/4” 40.45.41400
Speed Dowel Product Code No.
40.45.30000
FLATWORKACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
156
Ribbed with Center BulbRibbed with center bulb waterstops are employed in expansion joints where movement between members is anticipated. They are generally used above grade but in fact are a universal design and can be used in any type of joint above or below grade.
WATERSTOPS
Flat RibbedFlat ribbed waterstops are employed in construction joints where movement between members is not anticipated. They are generally used below grade in footings, walls, slabs, or for breaks in concrete due to limitations in working methods.
FLATWORKACCESSORIES
Serving Concrete Customers Since 1980.
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
157www.atlasform.com
DumbbellDumbbell waterstops are used in construction joints where movement between members is not anticipated. They are usually employed below grade and in horizontal applications. Dumbell waterstops with a centerbulb are suitable for use where movement between members is anticipated.
WATERSTOPS
Split RibbedSplit ribbed waterstops are used in either construction or expansion joints where the elimination of split form work is feasible. The split leg of the waterstop is spread open and nailed to the bulk head. When the form work is removed following completion of fi rst pour, the split leg is joined together and the second pour completed.
Product Code No. Description
50.72.11110 Waterstop Vinylex R6-316
50.72.11120 Waterstop Vinylex R6-38
50.72.11121 Waterstop Vinylex R6-38T
50.72.12110 Waterstop Vinylex RB6-316
50.72.12130 Waterstop Vinylex RB6-38
50.72.12210 Waterstop Vinylex RB9-316
FLATWORKACCESSORIES
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
158
The Hydro-Flex waterstop is a preformed adhesive hydrophilic waterstop designed to swell in the presence of water providing a watertight seal in cold joints on concrete structures. This highly advanced product is made from butyl rubber, polypropylene elastomers, hydrophilic fi llers and plasticizers providing a more uniform and controlled volumetric expansion upon contact with water. Hydro-Flex Waterstop is self-adhesive and bonds to a wide variety of substrates. Its ability to swell, allows it to penetrate into poorly consolidated concrete surfaces.
WATERSTOPS
Synko-Flex preformed plastic adhesive waterstop is a specially formulated non-swelling preformed joint sealant that provides a long lasting, watertight bond to both fresh and cured concrete surfaces. Synko-Flex is a single-component, self-sealing adhesive compound, extruded in a square cross-section between two quick-release protective wrappers. It bonds to cured concrete surfaces and fuses with fresh concrete during the hydration and curing process to achieve a watertight seal within cold joints at footings, walls and slabs on a wide variety of concrete structures. It does not rely on swelling to achieve its watertight seal and therefore, it is unaffected by rain or wet conditions which may occur prior to joint completion.
HENRY HYDRO-FLEXWATERSTOP
HENRY SYNKO-FLEXWATERSTOP
Product Code No.50.73.11000
Product Code No.Synko Flex 50.73.12000
Synko Flex Primer 50.73.12100
FLATWORKACCESSORIES
Serving Concrete Customers Since 1980.
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
159www.atlasform.com
ADA DECTECTABLE WARNING PANELS
ARCIS ADA TACTILE PANELS
Material Specifi cations• Compressive stress resulting from prestress 220 PSI both directions• Cast Stone compressive strength greater than 9000 psi average at 56 days ASTM C140-98b• Constructed unit fl exural strength; modulus of rupture greater than 1200 psi ASTM C293-94• Absorption less then 5.3% ASTM C140• Abrasion resistance; Coeffi cient of loss .1cm3/cm2 ASTM C418-98• Freeze-Thaw resistance; less than 1% loss after 75 cycles, ASTM C1262d-98, 3% NaCL solution• Mechanical anchor pull out strength greater than 900 lbs each• Mechanical anchor push through strength greater than 1200 lbs each• Slip resistance greater than .8, ASTM C1028-96
Product Description
Product Code No.
2’ x 2’ Yellow Panels 50.20.112202’ x 2½’ Yellow Panels 50.20.112252’ x 3’ Yellow Panels 50.20.112302’ x 2’ Red Panels 50.20.12220
2’ x 2½’ Red Panels 50.20.122252’ x 3’ Red Panels 50.20.12230
2’ x 2’ Black Panels 50.20.162202’ x 2½’ Black Panels 50.20.162252’ x 3’ Black Panels 50.20.16230
Arcis ADA panels perform the vital safety function of highlighting danger areas of complicated intersections, transit platforms, crossings and blended transitions. Premium cast stone mix combines high strength and abrasion resistance with entrained air for freeze/thaw resistance. The mixes utilize quartz and granite having extremely low absorption characteristics (less than 1% by weight) and extremely high strength and abrasion resistance. Arcis panels are cast on drop tables which can compact very dry concrete, allowing the use of a low water cement ratio (less than .3), a key to high performance concrete. Along with several special additives and a controlled heat curing process the result is a premium high-tech cast stone.
Features• Fast & easy installation. Only an additional 10 minutes to typical concrete ramp placement. • Pre-stressed with high tensile strength stainless steel tendons for impact and crack resistance.• Truncated domes meet federal regulations.• Thermal coeffi cient of expansion similar to concrete for maximum service life through temperature cycles. Helps prevent warping, fl oating, voids and tripping hazards.• Excellent durability in extreme temperatures, direct sunlight, & freeze/ thaw exposure.• No waiting for concrete to setup; begin to install as soon as ramp is poured. • No extra weights or expensive adhesives needed to keep panels down.• Can cut to fi t custom applications.• Made in the USA!
PRECAST& TILT-UP
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
160
P-31 COREWALL SLOTTED INSERT, STRAP TYPE
COREWALL SLOTTED INSERT, NUT TYPE
PLASTIC SETTING BOLT
DELTA TIE SANDWICH PANEL CONNECTORP-24
P-25
P-30
Available in full cartons only.
Product Code No. Description Packaging
5” x 7” TIE 200 per carton
Product Code No. Bolt Dia. Wt. Lbs. per 100
20.28.60010 1/2” 5.5
20.28.60020 3/4” 8.0
20.28.60030 1” 16.0
Part No. Galvanized Product Code No.
Epoxy Coated Product Code No.
Wt. Lbs.
CS425 1.9 Ea.
CS625 2.5 Ea.
CS825 3.5 Ea.
CS435 2.2 Ea.
CS635 3.0 Ea.
CS835 4.3 Ea.
CS445 2.9 Ea.
CS645 4.2 Ea.
CS845 5.2 Ea.
Part No. Galvanized Product Code No.
Epoxy Coated Product Code No.
Wt. Lbs.
SA 1425 2.1 Ea.
SA 1625 2.8 Ea.
SA 1825 3.9 Ea.
SA 1435 2.7 Ea.
SA 1635 3.4 Ea.
SA 1835 4.5 Ea.
Special Order
Special Order
Special Order
PRECAST& TILT-UP
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
161
SWIFT LIFT® LIFTING EYES
P-51
COREWALL STRAP ANCHOR, STANDARD P-32
SWIFT LIFT® UNIVERSAL LIFTING EYES
P-50
U.S. Patent No. 4,398,762Caution: Not interchangeable with other manufacturers’ products.
U.S. Patent No. 3,499,676Caution: Not interchangeable with other manufacturers’ products.
Part No. Galvanized Product Code No.
Epoxy Coated Product Code No.
Wt. Lbs.
CE 804 1.4 Ea.
CE 806 2.6 Ea.
CE 808 3.8 Ea.
CE 810 2.0 Ea.
CE 812 3.2 Ea.
CE 814 5.4 Ea.
Safe Working Loads-Tons
Product Code No.
Wt. Lbs.
1 3.0 Ea.
2 60.10.30002 5.0 Ea.
4 60.10.30004 7.5 Ea.
8 60.10.30008 17.0 Ea.
20 39.0 Ea.
Safe Working Loads-Tons
Product Code No.
Wt. Lbs.
2 60.10.25002 5.8 Ea.
4 60.10.25004 9.2 Ea.
8 60.10.25008 17.8 Ea.
Special Order
PRECAST& TILT-UP
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
162
P-53 SWIFT LIFT® EYE ANCHORS
P-52 SWIFT LIFT® ANCHORSMade of special high tensile strength steel.
Contact Atlas Construction Supply for concrete strength requirements to develop Safe Working Loads. DOT certifi ed SL Anchors are also available by special order.
SWIFT LIFT ANCHORS WITH WASHER
For use with 1,2,4,8 & 16 ton hardware, respectively.
P-52-W
Safe Working Loads-Tons
Size Dia. X Length
Plain Product Code No.
Packaging Wt. Lbs.per 100
1 3/8” x 2-5/8” 60.11.70102 250 13.3
1 3/8” x 3-3/8” 60.11.70103 200 15.5
1 3/8” x 4-3/4” 60.11.70105 200 19.0
1 3/8” x 8” 60.11.70108 100 29.0
1 3/8” x 9-1/2” 60.11.70109 100 38.0
2 9/16” x 2-3/4” 60.11.70202 125 32.0
2 9/16” x 3-3/8” 60.11.70203 125 39.0
2 9/16” x 5-1/2” 60.11.70205 100 51.5
2 9/16” x 6” 60.11.70206 100 55.0
2 9/16” x 6-3/4” 60.11.70207 50 61.0
2 9/16” x 11” 60.11.70211 50 96.0
4 3/4” x 3-3/4” 60.11.70403 50 83.0
4 3/4” x 4-1/4” 60.11.70404 50 88.0
4 3/4” x 4-3/4” 60.11.70405 50 96.4
4 3/4” x 5-1/2” 60.11.70406 50 100.0
4 3/4” x 7-1/8” 60.11.70407 25 128.0
4 3/4” x 9-1/2” 60.11.70409 25 157.4
4 3/4” x 14” 60.11.70414 212.0
4 3/4” x 19” 60.11.70419 275.0
8 1-3/32” x 4-3/4” 60.11.70805 215.0
8 1-3/32” x 5-1/4”
8 1-3/32” x 6-3/4” 60.11.70807 275.0
8 1-3/32” x 10” 60.11.70810 395.0
8 1-3/32” x 10-3/8” 461.0
8 1-3/32” x 26-3/4” 60.11.70826 883.0
20 1-1/2” x 10” 60.11.72010 970.0
20 1-1/2” x 19-3/4” 60.11.72020 1306.0
Safe Working Loads-Tons
Size Dia. X Length Product Code No.
Wt. Lbs.per 100
2 Ton 9/16” x 2-3/4” 40.0
4 Ton 3/4” x 3-3/4” 82.0
Safe Working Loads-Tons
Size Dia. X Length
Packaging Product Code No.
Wt. Lbs.per 100
1 3/8” x 2-5/8” 250 14.0
2 9/16” x 3-1/2” 100 40.0
4 3/4” x 4-3/4” 50 92.0
5 60.11.90500
8 1-3/32” x 7-1/8” 20 60.11.91000 290.0
20 1-1/2” x 9-5/8” 60.11.92000 750.0
PRECAST& TILT-UP
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
163
SWIFT LIFT® THROW AWAY RECESS PLUG P-54
SWIFT LIFT® NARROW RECESS PLUG P-56
SWIFT LIFT® PLUS RECESS PLUG P-56-PL
SWIFT LIFT® RECESS PLUGS P-56-R
FOR USE WITH P-59 SHEAR BARS
FOR USE WITH P-63 AND P-64
USE WITH ANY SWIFT LIFT ANCHOR AND WITH P-66-PL, P-67-PL AND P-68-PL SWIFT LIFT PLUS PLATES.
FOR USE WITH P-63-R AND P-66-R
Size Product Code No.
Wt. Lbs.per 100
2 ton 60.10.76200 0.1 Ea.
4 ton 60.10.76400 0.2 Ea.
Safe Working Loads-Tons
Plug Dia. Product Code No.
Packaging
1 2-1/2” 150
2 3-1/4” 150
4 4” 100
8 5” 50
Safe Working Loads-Tons
Dia. Narrow Recess Plug Product Code No.
Packaging Wt. Lbs.
1 2-3/8” 200 18.0
2 3” 100 35.0
4 3-3/4” 50 67.6
8 4-3/4” 25 100.0
20 6-3/8” 10 300.0
Safe Working Loads-Tons
Dia. Narrow Recess Plug Product Code No.
Packaging Wt. Lbs.per 100
1 2-3/8” 60.10.70100 50 13.0
2 3” 60.10.70200 20 25.0
4 3-3/4” 60.10.70400 20 50.0
8 4-3/4” 60.10.70800 20 100.0
20 6-3/8” 10 300.0
Special Order
Special Order
PRECAST& TILT-UP
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
164
REINFORCING BAR FOR SWIFT LIFT ANCHORS
P-60
SHEAR BAR FOR SWIFT LIFT ANCHORSP-59
SWIFT LIFT® RUBBER RING FOR STEEL RECESS PLUG
P-58
SWIFT LIFT® STEEL RECESS PLUGP-57
Safe Working Loads-Tons
Product Code No.
Packaging Wt. Lbs.
1 25 0.8 Ea.
2 25 1.5 Ea.
4 20 3.5 Ea.
Safe Working Loads-Tons
Product Code No.
Packaging Wt. Lbs.per 100
1 100 1.0
2 60.10.79200 50 2.0
4 60.10.79400 25 3.0
For Use With Rebar Size Product Code No. Wt. Lbs. per 100
1 ton anchor #4 128.0
2 ton anchor #4 156.0
4 ton anchor #4 60.11.12100 173.0
8 ton anchor #6 60.11.13100 438.0
For Use With Wire Dia. Product Code No. Wt. Lbs. per 100
2 ton anchor 0.375 60.11.11200 94.0
4 ton anchor 0.44 60.11.12110 150.0
For Use With Rebar Size Product Code No. Wt. Lbs.per 100
1 ton anchor .306 wire 82.0
2 ton anchor #3 75.0
4 ton anchor #5 60.11.10305 134.0
8 ton anchor #6 60.11.10306 600.0
20 ton anchor #8 60.11.10308 1913.0
Special Order
PRECAST& TILT-UP
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
165
SWIFT LIFT® ATTACHMENT STUD WITH WING NUTS
P-63-R
FOR USE WITH P-56-R RECESS PLUG AND P-56-R ATTACHMENT NUT
SWIFT LIFT® SETTING PLATE WITH COUNTERSUNK SCREW
P-61
SWIFT LIFT® COUNTERSUNK SCREW P-62
SWIFT LIFT® STUD P-63
SWIFT LIFT® PLUS HOLDING STUDWITH WING NUT
P-63-PL
Special Order
For Wing Nut see P-64, Use with P-56 & P-56-R Recess Plug.
Safe Working Loads-Tons
Product Code No. Packaging Wt. Lbs. / Ea.
4 25 42.0
8 25 66.0
Size For Use With Product Code No.
5/16” x 3/4” 4 ton
7/16” x 3/4” 8 ton
Safe Working Loads-Tons
Size Dia. X Length Product Code No.
Packaging Wt. Lbs.per 100
1 5/16” x 3” 100 9.0
2 7/16” x 3” 50 23.0
4 7/16” x 3” 50 28.0
8 7/16” x 3” 25 30.0
20 12mm x 3-3/4” 10 60.0
Safe Working Loads-Tons
Stud Dia. X Length Packaging Product Code No.
2, 4, & 8 3/8” x 6” 50
Safe Working Loads-Tons
Stud Dia. Product Code No.
Wt. Lbs.
1 8mm 0.15 Ea.
2 12mm 0.15 Ea.
4 12mm 0.15 Ea.
8 12mm 0.15 Ea.
Special Order
Special Order
Special Order
Special Order
Fixed FreeNC Thread
PRECAST& TILT-UP
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
166
SWIFT LIFT® PLUS PLATESP-66-PLP-67-PLP-68-PL
SWIFT LIFT® WING NUTP-64
SWIFT LIFT® PLUS COIL WING-NUTP-64-PL
SWIFT LIFT® SAFETY PIN WITH WASHERP-65
SWIFT LIFT® TAPPED PLATEP-66
FOR USE IN SL LIFTING EYE
FOR USE IN SL RECESS PLUG
USE WITH P-56-L SWIFT LIFT PLUS RECESS PLUGS ONLY
† Use P-64-PL Wing Nut
Size Safe Working Loads-Tons
Product Code No.
5/16” 1 ton
7/16” 2, 4 & 8 ton
12mm 20 ton
Size Product Code No. Dia. Packaging
2, 4 & 8 ton 60.10.28208 3/8” dia. Coil 50
Safe Working Loads-Tons
Product Code No. Wt. Lbs.per 100
1 3.0
2 6.0
4 20.0
8 24.0
20 47.0
Safe Working Loads-Tons
Tapped for Bolt Size
Product Code No.
Packaging Wt. Lbs.per 100
1 5/16” dia. 50 2.0
2 7/16” dia. 50 5.0
4 7/16” dia. 50 9.0
8 7/16” dia. 25 16.0
20 5/8” dia. 10 38.0
Type Product Code No. Safe Working Loads-Tons
Plate Size Width X Length
P-66-PL 1 .75” x 1.5”
P-66-PL 60.10.21222 2 .75” x 1.6875”
P-66-PL 60.10.21241 4 .822” x 1.6875”
P-66-PL 8 .822” x 2.375”
P-67-PL † 1 .75” x 1.5” x 4”
P-67-PL † 60.10.21221 2 .75” x 1.6875” x 4”
P-67-PL † 60.10.21242 4 .822” x 1.6875” x 4”
P-67-PL † 60.10.21281 8 .822” x 2.375” x 4”
P-68-PL † 1 .625” x 1.75”
P-68-PL † 2 .875” x 2.5”
P-68-PL † 4 1.375” x 3.25”
P-68-PL † 8 1.75” x 3.75”
3/8” Dia. NC Threads
P-67-PL SL Plus Stud Plate
4”
P-68-PL Sl Plus Holding Plate
Special Order
Special Order
Special Order
PRECAST& TILT-UP
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
167
SWIFT LIFT® ATTACHMENT NUTS
SWIFT LIFT® PLUS MAGNETIC SETTING
PIPE TURNING DEVICE
PANEL PADS
P-66-R
P-69-MP-56-MS
P-74
P-75P-76
P-78
P-56-MS Screw for Swift Lift Plus Magnetic Setting Plate.3/8”- 16 NC x 3/4” Allen Head Screw.
For use with P-56-L Recess Plug only.
P-76 UTILITY ANCHOR SETTING PLUG
P-75 UTILITY ANCHOR
Safe Working Loads-Tons
Thread Size Product Code No. Wt. Lbs.
1 8 mm 0.2 Ea.
2 12 mm 0.2 Ea.
4 12 mm 0.3 Ea.
8 12 mm 0.3 Ea.
Size Product Code No. Wt. Lbs.
2 Ton 0.56 Ea.
4 Ton 0.63 Ea.
8 Ton 1.06 Ea.
Product Code No. Wt. Lbs.
0.03 Ea.
Size With 8ft. Sling Product Code No.
4 Ton
8 Ton
A B Type Product Code No. Wt. Lbs.
5-1/4” 3-1/8” 4UA444 60.11.50014 0.32 Ea.
6” 3-3/4” 5UA444 60.11.50015 0.75 Ea.
6-7/16” 3-3/4” 5UA671 60.11.50215 1.00 Ea.
7-3/8” 4-3/4” 6UA444 60.11.50016 0.75 Ea.
7-9/16” 4-3/4” 6UA671 60.11.50216 1.00 Ea.
9-7/8” 6-3/4” 8UA671 60.11.50218 1.50 Ea.
Type Description Product Code No. Wt. Lbs.
90 Degrees .444 Anchor 1.34 Ea.
45 Degrees .444 Anchor 1.34 Ea.
90 Degrees .671 Anchor 1.34 Ea.
45 Degrees .671 Anchor 1.34 Ea.
Dimensions Product Code No. Pieces per box Wt. Lbs. per box
2-1/2” x 5-1/2” x 1/2” 60.25.81000 400 40.0
P-75-DOT is also available
Special Order
Special Order
Special Order
PRECAST& TILT-UP
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
168
BEARING STRIPS (NON-SKID)P-82
SHIM STRIPSP-80
HEAVY DUTY SHIMPACKSP-81
Available in full cartons only.Other sizes available on request.Note: Each 2” x 4” or 4” x 4” sheet is scored every 2” of the 24” width; each 3” x 3” sheet is scored every 3” of the 24” width.
Available in full cartons onlyNote: 1-1/16” x 4” x 6” and 1-1/16” x 4” x 4” Shimpaks are made by shim thicknessof one 1/16” thick, three 1/4” thick and two 1/8” thick, in that order.Shimpaks are held together with a resilient band to make removal or addition easy.
Available in full cartons onlyNote: Each carton of 48” contains 25 scored sheets, which offer 300 2” x 48” strips; Other thicknesses, lengths and scoring available on special order; non-skid bearing strips are not designed for stacking.
Item and Size Product Code No. Pieces per carton Wt. Lbs. per carton
1/16” x 2” x 4” or
1/16” x 4” x 4”
2000
1000
39.0
39.0
1/8” x2” x 4”or
1/8” x 4” x 4”
2000
1000
78.0
78.0
1/4” x 2” 4” or
1/4” x 4” x 4”
1000
500
78.0
78.0
1-16” x 3” x 3” 2000 44.0
1/8” x 3” x 3” 2000 86.0
1/4” x 3” x 3” 1000 86.0
Item and Size Product Code No. Pieces per Carton Wt. Lbs. per Carton
1-1/16” x 4” x 6” 60.25.71020 50 50.0
1-1/16” x 4” x 4” 100 65.0
1-1/16” x 3” x 3” 100 39.0
1-1/16” x 6” x 6” 50 71.0
1-1/8” x 4” x 6” 60.25.71010
GTI Shimpacks 4” x 6” 60.25.72020
Item and Size Product Code No. Pieces per Carton Wt. Lbs. per Carton
1/2” x 2” x 48” 1200 LF 135.0
1/4” x 2” x 48” 600 LF 135.0
1/8” x 2” x 48” 60.25.81224
Special Order
PRECAST& TILT-UP
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
169
STAR INSERTS AND ACCESSORIES P-86P-87P-88
KOROLATH CORE PLUGS P-84
HORSESHOE SPACER STRIPS P-83
Core Plugs are designed for manufacturers of prestressed hollow core planks.They are lightweight, easy to insert and effectively block off grout fl ow to ensure bearing through the ends of the planks onto the sill and foundation.The exclusive “wall” taper design of these plastic core plugs assures a tight interference fi t. Core Plugs are available for most sizes of spancrete, fl exicore, spiroll, dycore and dynaspan. Other shapes and sizes are available. Plug num-bers refer to the diameter of the core holes and not to the thickness of the plank.
Minimum order 100 pieces of each thickness and size. Other sizes available on special order. Note: Slot width 13/16”.
Thickness Size Product Code No. Pieces per Carton
Wt. Lbs. per Carton
1/16” 2” x 3” 1000 10.0
1/8” 2” x 3” 1000 20.0
1/4” 2” x 3” 500 20.0
1/16” 3” x 4” 1000 22.0
1/8” 3” x 4” 1000 44.0
1/4” 3” x 4” 500 44.0
No. Dia. Product Code No. Plugs per Carton
Wt. Lbs. per Carton
400 4” 1000 27.0
600 6” 60.25.86600 2000 84.0
800 8” 1000 72.0
Product Thread Size x Insert Length
Qty. Per Carton Wt. Lbs. Per Carton
Product Code No.
P-86 Standard Style
P10T 10-24 x 11/16” 1000 7.0
P15T 1/4” x 1-1/2” 1000 45.5
P24T 3/8” x 1” 500 22.0
P25T 3/8” x 1-3/8” 400 32.2
P35T 1/2” x 1-1/2” 150 40.5
P36T 1/2” x 2-7/8” 50 27.1
P45T 5/8” x 1-11/16” 150 46.6
P46T 5/8” x 2-7/8” 50 36.4
P55T 3/4” x 1-11/16” 50 11.5 20.42.85302
P56T 3/4” x 3” 50 23.8
P-86 Open Bottom Style
P25TOB 3/8” X 1-3/8” 400 23.5
P35TOB 1/2” X 1-1/2” 150 35.2
P-87 Star Adapter Plug
P25A 3/8” 500 7.9
P35A 1/2” 100 3.8
P45A 5/8” 100 7.8
P55A 3/4” 100 5.2 20.42.85301
P-88 Star Holzin Insert
HOLZIN 1/2” 100 18.8
Special Order
Special Order
PRECAST& TILT-UP
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
170
FLEET LIFT® RING CLUTCH STANDARDP-91-SP-91-NCP-91-RB
FLEET LIFT® RING CLUTCH HANDLE
FLEET LIFT® RING CLUTCH WITH CABLE BALL
FLEET LIFT® ERECTION ANCHOR WITH SHEAR PLATE
FLEET LIFT® ERECTION ANCHOR
FLEET LIFT® ERECTION ANCHOR WITH DOUBLE SHEAR PLATE/PIN
FLEET LIFT® ERECTION ANCHOR WITH 45 DEGREE HEAD SHEAR PLATE
P-92P-92-PP-92-DPP-92-AH
P-91 Ring Clutch Standard
P-92 Erection Anchor
P-92 Erection Anchorwith Shear Plate
P-92-DP Erection Anchorwith Double Shear Plate/Pin
P-92-AH Erection Anchorwith 45º Head with Shear Plate
Load Range Length Product Code No.
Pieces per Box
Wt. Lbs. Ea.
2-3 ton 10.38” Each 3.65
4-6 ton 12.50” Each 8.65
8-10 ton 16.50” Each 19.87
Load Range Length Product Code No. Pieces per box Wt. Lbs. Ea.
2-3 ton 30” Each 3.65
4-5 ton 36” Each 8.65
8-10 ton 36” Each 19.87
Load Range Product Code No.
Pieces per Box
Wt. Lbs. Each
3 ton Each 0.35
6 ton Each 0.65
10 ton Each 1.75
Load Range Length Product Code No.
Pieces per drum
Wt. Lbs. per 100
2 ton 8.38” 450 225
4 ton 11.88” 200 541
6 ton 13.25” 100 909
8 ton 13.25” 100 1046
Load Range Length Product Code No.
Pieces per drum
Wt. Lbs. per 100
2 ton 8.38” 300 225
4 ton 11.88” 150 541
6 ton 13.25” 75 909
8 ton 13.25” 75 1046
Load Range Length Product Code No.
Pieces per drum
Wt. Lbs. per 100
2 ton 8.38” 300 242
4 ton 11.88” 150 583
6 ton 13.25” 75 951
8 ton 13.25” 75 1088
Load Range Length Product Code No.
Pieces per drum
Wt. Lbs. per 100
2 ton 8.50” 300 230
4 ton 11.25” 150 550
8 ton 13.75” 75 1050
Special Order
Special Order
Special Order
Special Order
PRECAST& TILT-UP
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
171
FLEET LIFT® TWO-HOLE ERECTION ANCHOR P-92-HP-92-HP
FLEET LIFT® SANDWICH PANELERECTION ANCHOR
P-92-SP-92-SP
FLEET LIFT® L-ANCHOR P-93
FLEET LIFT® TWO HOLE ERECTION ANCHOR WITH SHEAR PLATE
FLEET LIFT® SANDWICH PANELERECTION ANCHOR WITH SHEAR PLATE
P-93 L-Anchor
P-92-SP Sandwich PanelErection Anchor with Shear Plate
P-92-S Sandwich PanelErection Anchor
P-92-HP Two-Hole Erection Anchor with
Shear Plate
P-92-H Two-Hole Erection Anchor
Load Range Length Product Code No. Pieces per drum Wt. Lbs. per 100
2 ton 4.38” 1770 72.0
2 ton 8.38” 450 162.0
4 ton 7.50” 400 280.0
4 ton 11.88” 200 419.0
6 ton 13.25” 100 769.0
8 ton 13.25” 100 923.0
Load Range Length Product Code No. Pieces per drum Wt. Lbs. per 100
2 ton 4.38” 500 118
2 ton 8.38” 300 208
4 ton 7.50” 200 366
4 ton 11.88” 200 505
6 ton 13.25” 100 875
8 ton 13.25” 100 1029
Load Range Width Product Code No. Pieces per drum Wt. Lbs. per 100
4 ton 6.00” 400 317
8 ton 6.00” 200 554
8-10 ton 7.00” 100 1049
8-10 ton 8.00” 100 1450
Load Range Width Product Code No.
Pieces per drum Wt. Lbs. per 100
4 ton 6.00” 400 349
8 ton 6.00” 200 586
8-10 ton 7.00” 100 898
8-10 ton 8.00” 100 940
Load Range Length Product Code No. Pieces per drum Wt. Lbs. per 100
1 ton 4.00” 2025 30
Special Order
Special Order
Special Order
Special Order
Special Order
PRECAST& TILT-UP
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
172
FLEET LIFT® PLATE ANCHORP-95-P
FLEET LIFT® FLAT FOOT ANCHORP-95-F
FLEET LIFT® T-ANCHORP-94
P-95-P Plate Anchor
P-95-F Flat Foot Anchor
Load Range Length Product Code No. Pieces per drum Wt. Lbs. per 100
2 ton 4.25” 1500 63.0
2 ton 5.75” 800 83.0
4 ton 4.25” 700 135.0
4 ton 4.75” 550 148.0
4 ton 5.25” 500 161.0
4 ton 5.75” 425 175.0
4 ton 6.25” 400 188.0
4 ton 6.75” 375 201.0
4 ton 7.25” 325 215.0
4 ton 7.75” 300 228.0
4 ton 8.25” 275 241.0
4 ton 8.75” 250 254.0
4 ton 9.25” 225 268.0
4 ton 9.75” 200 281.0
4 ton 10.25” 175 294.0
4 ton 10.75” 150 309.0
4 ton 11.25” 150 321.0
6 ton 11.50” 175 486.0
8 ton 6.25” 250 321.0
8 ton 11.50” 175 576.0
Load Range Length Product Code No. Pieces per drum
Wt. lbs. per 100
2 ton 2.75” 2000 50
2 ton 3.38” 1500 58
3 ton 3.75” 1050 92
8 ton 6.25” Use P-94 8 ton anchor
Load Range Length Product Code No. Pieces per drum
Wt. lbs. per 100
2 ton 2.25” 1600 71
4 ton 3.00” 500 142
4 ton 3.50” 500 155
4 ton 4.38” 500 196
8 ton 6.88” 250 436
Special Order
Special Order
Special Order
PRECAST& TILT-UP
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
173
FLEET LIFT® TWO-HOLE ANCHOR P-96
FLEET LIFT® DOUBLE TEE SPECIALTY ANCHOR
P-97-DT
FLEET LIFT® SHEAR BAR P-98-S
FLEET LIFT® TENSION BAR P-98-T
P-98-T Tension Reinforcement
P-98-S Shear Bar
P-97-DT Shear Bar
P-96 Two-Hole Anchor
Note Anchor Length Required:4 ton: Tee Depth Minus 1.50”.8 ton: Tee Depth Minus 1.75”.
Load Range Length Product Code No. Pieces per drum
Wt. lbs. per 100
2 ton 4.00” 1200 42
2 ton 2.75” 1200 27
4 ton 5.50” 1125 123
8 ton 7.00” 400 331
Load Range Length Product Code No. Pieces per drum
Wt. lbs. per 100
4 ton 16.50” to 23.50” 100 300
8 ton 22.25” to 32.25” 60 700
Load Range Length Product Code No. Pieces per drum
Wt. lbs. per 100
2 ton 14.75” 450 98
4 ton 14.75” 400 107
8 ton 14.75” 400 123
Load Range Grade 60 Rebar Size Overall Length Product Code No.
Wt. Lbs. per 100
1500 PSI
2 ton #3 36” 112.6
4 ton #4 48” 267.0
8 ton #6 72” 901.1
2000 PSI
2 ton #3 33” 103.2
4 ton #4 42” 233.6
8 ton #6 66” 826.0
3000 PSI
2 ton #3 30” 93.8
4 ton #4 36” 200.2
8 ton #6 54” 675.8
Special Order
Special Order
Special Order
Special Order
PRECAST& TILT-UP
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
174
FLEET LIFT® REUSABLE RECESS PLUGP-99P-99-N
FLEET LIFT® CAST STEEL RECESS PLUGP-99-C
FOAM FOR USE WITH P-99-C
P-100 FLEET LIFT® HOLDING PLATEFOR USE WITH P-99-N
P-101 FLEET LIFT® HOLDING ROD FOR USE WITH P-99 AND P-99-C
P-102 FLEET LIFT® WEDGE FOR USE WITH P-99-C
P-103
P-99 Urethane Recess Plug
P-99-C Cast SteelRecess Plug
P-100 Holding Plate
P-101 Holding Rod
P-102 Wedge
P-103 Foam
URETHANE REUSABLE WITH 3/8” COIL THREAD
CAST STEEL WITH 1/2” COIL THREAD
Type Product Description Load Range Length Product Code No.
Pieces per box
Wt. Lbs. per 100
P-99-N Narrow Recess 1 ton 4” 50 23.0
P-99 Plastic Recess 2-3 ton 4” 50 22.0
P-99 Plastic Recess 4-6 ton 5-1/4” 50 60.0
P-99 Plastic Recess 8-10 ton 7-1/2” 25 155.0
Type Product Description Load Range Length Product Code No.
Pieces per box
Wt. Lbs. per 100
P-99-C Cast Recess 2 ton 4” 50 72.0
P-99-C Cast Recess 4-6 ton 5-1/4” 50 122.0
P-99-C Cast Recess 8 ton 7-1/2” 10 350.0
Type Product Description Load Range Length Product Code No.
Pieces per box
Wt. Lbs. per 100
P-100 Holding Plate 2 ton 2-3/4” 50 15.0
P-100 Holding Plate 4-6 ton 3-3/8” 50 25.0
P-100 Holding Plate 8 ton 4-7/8” 25 59.0
Type Product Description Load Range Length Product Code No.
Pieces per box
Wt. Lbs. per 100
P-101 Holding Rod 3/8” Coil 6” 50 25.0
P-101 Holding Rod 1/2” Coil 6” 50 42.0
Type Product Description Load Range Product Code No.
Pieces per box
Wt. Lbs. per 100
P-102 Wedge 2 ton 50 13.0
P-102 Wedge 4-6 ton 50 38.0
P-102 Wedge 8 ton 10 94.0
Type Product Description Load Range Product Code No.
Pieces per box
Wt. Lbs. per 100
P-103 Foam 2 ton 60.10.47002 1000 5.0
P-103 Foam 4-6 ton 60.10.47004 1000 5.0
P-103 Foam 8 ton 60.10.47008 500 20.0
Special Order
Special Order
Special Order
Special Order
Special Order
PRECAST& TILT-UP
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
175
DOUBLE PICKUP INSERT T-2
SINGLE PICKUP INSERT T-1
Alternate leg design
WITH PLASTIC TIPPED LEGS OR STAINLESS STEEL TIPS
WITH PLASTIC TIPPED LEGS OR STAINLESS STEEL TIPS
See F-53 Thin Slab Insert for 3/4” Dia. Pickup Inserts
Dia. Slab Thickness Product Code No. Wt. Lbs. per 100
1” 5-1/2” 60.21.53055 131.0
1” 6” 60.21.53060 133.0
1” 6-1/2” 60.21.53065 135.0
1” 7” 60.21.53070 136.0
1” 7-1/4” 137.0
1” 7-1/2” 60.21.53075 138.0
1” 8” 60.21.53080 139.0
Dia. Slab Thickness Product Code No. Wt. Lbs. per 100
1-1/4” Up to 5-1/2” 190.0
1-1/4” 6” 192.0
1-1/4” 6-1/2” 193.0
1-1/4” 7” 195.0
1-1/4” 7-1/2” 60.21.52075 196.0
1-1/4” 8” 60.21.52080 198.0
1-1/2” Up to 5-1/2” 60.21.51055 207.0
1-1/2” 6” 60.21.51060 209.0
1-1/2” 6-1/2” 60.21.51065 210.0
1-1/2” 7” 60.21.51070 211.0
1-1/2” 7-1/2” 60.21.51075 213.0
1-1/2” 8” 60.21.51080 215.0
Dia. Slab Thickness Product Code No. Wt. Lbs. per 100
1” Double Pickup Insert
1” Up to 5-1/2” 60.21.63055 300.0
1” 6” 60.21.63060 304.0
1” 6-1/2” 60.21.63065 306.0
1” 7” 60.21.63070 310.0
1” 7-1/2” 60.21.63075 312.0
1” 8” 60.21.63080 316.0
1-1/4” Double Pickup Insert
1-1/4” 7” 60.22.62070
1-1/4” 7” 60.22.60277
1-1/4” 8” 60.22.60280
1-1/4” 8” 60.22.60287
1-1/4” 8” 60.22.60288
1-1/4” 8” 60.22.60289
1-1/4” 9” 60.22.60297
1-1/4” 10” 60.22.62100
1-1/4” 12” 60.22.62120
1-1/2” Double Pickup Insert
1-1/2” Up to 5-1/2” 60.22.61055 461.0
1-1/2” 6” 60.22.61060 465.0
1-1/2” 6-1/2” 469.0
1-1/2” 7” 473.0
1-1/2” 7-1/2” 477.0
1-1/2” 8” 481.0
PRECAST& TILT-UP
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
176
DOUBLE EDGE PICKUP INSERTT-3
SINGLE EDGE PICKUP INSERTT-3-A
BRACE ANCHOR FOR FILL T-4
Dia. Loop Length Product Code No. Wt. Lbs.per 100
3/4” 9” 263.0
3/4” 12” 296.0
1” 12” 60.21.73002 330.0
1-1/4” 12” 350.0
Dia. Loop Length Product Code No. Wt. Lbs.per 100
3/4” 9” 153.0
3/4” 12” 157.0
1” 12” 60.21.73001 175.0
1-1/4” 12” 185.0
Dia. Slab Thickness Product Code No.
3/4” 4” 60.22.35040
3/4” 4-1/2” 60.22.35045
3/4” 5” 60.22.35050
3/4” 5-1/2” 60.22.35055
3/4” 6” 60.22.35060
Special Order
Special Order
PRECAST& TILT-UP
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
177
INVERTED BRACE ANCHOR T-5-A
BRACE ANCHOR T-6-A
LIFTING ANGLE T-8For Edge Lifting Plate see T-27.
Dia. Product Code No. Wt. Lbs.per 100
3/4” 60.22.15030 80.0
Length Bolt Size Product Code No. Wt. Lbs.
21” 1-1/4” & 1-1/2” 60.20.41008 53.0 Ea.
18” 1” 45.0 Ea.
Dia. Slab Thickness Product Code No.
3/4” 4” 60.22.25040
3/4” 5” 60.22.25050
3/4” 5-1/2” 60.22.25055
3/4” 6” 60.22.25060
3/4” 6-1/2” 60.22.25065
3/4” 7” 60.22.25070
3/4” 7-1/4” 60.22.25072
3/4” 7-1/2” 60.22.25075
3/4” 8” 60.22.25080
3/4” 8-1/4” 60.22.25082
3/4” 8-1/2” 60.22.25085
3/4” 8-3/4” 60.22.25088
3/4” 9” 60.22.25090
3/4” 9-1/4” 60.22.25092
3/4” 9-1/2” 60.22.25095
3/4” 10” 60.22.25100
3/4” 10-1/2” 60.22.25105
3/4” 11” 60.22.25110
3/4” 11-1/4” 60.22.25112
3/4” 11-1/2” 60.22.25115
3/4” 12” 60.22.25120
3/4” 15” 60.22.25150
3/4” 16” 60.22.25160
PRECAST& TILT-UP
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
178
SET-EEZTMT-13-L
COIL-ANCHORTMT-13
SWIVEL LIFTING PLATET-12
DOUBLE END PICKUP INSERTT-11
SINGLE END PICKUP INSERTT-10
For Double Swivel Lifting Plate see T-26.
U.S. Patent No. 5,006,023
LUBRICANT FOR T-13 COIL ANCHOR BOLT
Dia. Insert Length Coil Tie Strut Shear bar Length
Product Code No. Wt. Lbs. / Ea.
1” 9” 2 12” 2.17
1-1/4” 10” 2 12” 2.47
1” 9” 4 12” 2.95
1” 12” 4 12” 3.47
1” 15” 4 12” 4.0
Dia. Insert Length Coil Tie Strut Shear bar Length
Product Code No.
Wt. Lbs.per 100
1” 9” 2 24” 302.0
1-1/4” 10” 2 24” 435.0
1” 9” 4 24” 457.0
1” 12” 4 24” 560.0
1” 15” 4 24” 664.0
Bolt Dia. Product Code No. Wt. Lbs. / Ea.
3/4” 60.20.20001 14.0
1” 60.20.20002 14.0
Dia. Length Product Code No.
Wt. Lbs. Packaging
T-13 Coil-Anchor Set 3/4” 4-1/2” 60.25.15150 0.8 Ea. 20 sets per carton
T-13 Coil-Anchor 3/4” 6” 60.25.15060 1.0 Ea. 20 sets per carton
Extra tangs 3/4” 60.25.15000 4.0 per 100 100 per bag
Product Code No.
Wt. Lbs. Packaging
0.4 Ea. 6 oz. bottle
Special Order
Special Order
Special Order
PRECAST& TILT-UP
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
179
STANDARD PIPE BRACE ASSEMBLIES T-14T-15Including Telescoping Pipe
ON-SITE PIPE BRACE T-19
Type Adjustment Wt. Lbs.
T-14, B-2 Regular Pipe Brace 13 ft. 0” to 20 ft. 6” 96.0 Ea.
T-14, B-4 Heavy-Duty Regular Pipe Brace 14 ft. 0” to 23 ft. 6” 130.0 Ea.
T-14, B-5 Heavy-Duty Long Pipe Brace 22 ft. 6” to 39 ft. 0” 208.0 Ea.
T-14, B-6 Short Pipe Brace 10 ft. 0” to 14 ft. 0” 75.0 Ea.
T-14, B-7 Jumbo Brace 15 ft. 0’ fi xed length 107.0 Ea.
T-14, B-8 Jumbo Brace 22 ft. 0” fi xed length 130.0 Ea.
T-14, B-9 Jumbo Brace with 5 ft. extension 27 ft. 0” fi xed length 172.0 Ea.
T-14, B-10 Jumbo Brace with 10 ft. extension 32 ft. 0” fi xed length 193.0 Ea.
T-14, B-11 Tru-Itt Brace 25 ft. 5” to 40 ft. 0” 505.0 Ea.
T-14, B-12 Jumbo Brace 32 ft. 0” fi xed length 245.0 Ea.
T-14, B-14 B-12 Brace with 10 ft. extension 42 ft. fi xed length 382.0 Ea.
T-14, B-15 B-12 Brace with two 10 ft. extensions 52 ft. fi xed length 410.0 Ea.
T-14, B-17 B-17 Superior Brace 32 ft. to 42 ft. 668.0 Ea.
T-14, B-18 B-18 Superior Brace 42 ft. to 52 ft. 855.0 Ea.
Type Adjustment Wt. Lbs.
T-15 Extension Pipe for B-2 Brace 21 ft. 6” to 29 ft. 0” 71.0 Ea.
T-15 Extension Pipe for B-8 Brace 5 ft 0” extension 42.0 Ea.
T-15 Extension Pipe for B-8 Brace 10 ft 0” extension 63.0 Ea.
T-15-C Coupler for B-8 Brace 21.0 Ea.
T-20 Extension for B-12 Brace 100.0 Ea.
T-20-C Coupler for B-12 Brace 65.0 Ea.
Size Wt. Lbs.
Adjustable from 7 ft. 6” to 8 ft. 10” 55.0 Ea.
PRECAST& TILT-UP
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
180
INSERT LOCATOR PLUGT-21
DOUBLE SWIVEL LIFTING PLATET-26
EDGE LIFTING PLATET-27
Available in full cartons only, sold in sets only.Note: Not recommended for contractors (except in emergency) to put in inserts in fi eldBuy inserts with Locator Plug installed
FOR COIL INSERTS
For smaller sizes see T-12 Swivel Lifting Plate
FOR 3/4” AND 1” DIA. BOLTS
Bolt Dia. Color Product Code No. Wt. Lbs. Ea. Packaging
3/4” Orange 0.2 50 per carton
1” Red 0.3 50 per carton
1-1/4” Red 0.3 50 per carton
1-1/2” Green 0.4 40 per carton
Bolt Dia. Product Code No. Wt. Lbs.
1” 8.0 Ea.
1-1/4” 60.20.20011 16.1 Ea.
1-1/2” 60.20.20012 16.1 Ea.
1” Bushing -
Product Code No. Wt. Lbs.
60.20.41027 23.0 Ea.
Special Order
PRECAST& TILT-UP
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
181
GROUND RELEASE IITM INSERT T-41T-41-S
GROUND RELEASETM LIFTER T-43-R
Requires a minimum concrete compressive strength of 2,500 psi.Ground Release II Inserts are shipped assembled (ready to use).Each Insert is sized 1/8” less than the panel thickness above.When ordering, specify overall panel thickness including structural thickness and aggregate or form liner thickness.Available in other sizes upon request.
REPLACEMENT T-43 LIFTING HARDWAREU.S. Patent No. 4,703,595 and 4,769,960 and Design 344,836
Structural Panel Thickness
Wire Base Product Code No.
Wt. Lbs.per 100
Packaging Plastic Base Product Code No.
5” 60.21.20500 160 20
5-1/4” 60.21.20525
5-1/2” 60.21.20550 165 20
6” 60.21.20600 170 20
6-1/4” 60.21.20625 172.5 20
6-1/2” 60.21.20650 175 20
6-3/4” 60.21.20675
7” 60.21.20700 180 20
7-1/4” 60.21.20725 182.5 20
7-1/2” 60.21.20750 185 20
8” 60.21.20800 190 20
8-1/4” 60.21.20825
8-1/2” 60.21.20850 253 10
8-3/4” 60.21.20875
9” 60.21.20900 256 10
9-1/4” 60.21.20925 258 10
9-1/2” 60.21.20950 259 10
10” 60.21.21000 262 10
10-1/2” 60.21.21050 265 10
11” 60.21.21100 302 10
11-1/2” 60.21.21150 304 10
12” 60.21.21200 306 10
15” 60.21.21500
24” 60.21.22400
Product Code No. Wt. Lbs.
60.20.10100 9.7 Ea.
PRECAST& TILT-UP
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
182
GYRO TILT PLUSTM EDGE LIFT INSERTT-49-E
GYRO TILT PLUSTM FACE LIFT INSERTT-49
GROUND RELEASE IITM PATCH CAPST-45
GROUND RELEASE IITM SPREADER BEAMT-46WITH 2 SHACKLES FOR USE WITH T-43-R LIFTING HARDWARE
For use with T-41 and T-49 Insert Recess
Product Code No. Wt. Lbs. Packaging
1.3 per bag 20 per bag
3/4” Brace anchor cap for use with T-6-A
Product Code No. Wt. Lbs. Packaging
0.5 per bag 20 per bag
Product Code No. Wt. Lbs.
38.0 Ea.
Structural Panel Thickness Product Code No. Wt. Lbs.per 100
Packaging
5” 160.0 20
5-1/2” 165.0 20
6” 170.0 20
6-1/4” 172.5 20
6-1/2” 175.0 20
7” 180.0 20
7-1/4” 182.5 20
7-1/2” 185.0 20
8” 190.0 20
8-1/2” 253.0 20
9” 256.0 20
9-1/4” 257.5 20
9-1/2” 259.0 20
10” 262.0 20
10-1/2” 265.0 20
11” 248.0 20
11-1/2” 271.0 20
12” 224.0 20
Product Code No.
FOR USE WITH T-41 AND T-49Special Order
Special Order
Special Order
Special Order
PRECAST& TILT-UP
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
183
GYRO TILT PLUSTM HARDWARE T-50
GYRO SHEAR BAR
GYRO TILT PLUSTM HEAVY DUTY INSERT T-52
Gyro Tilt Inserts are shipped assembled (ready-to-use).Each insert is sized 1/8” less than panel thickness above.Requires a minimum concrete compressive strength of 2,500 psi.When ordering, specify overall panel thickness including structural thickness and aggregate or form liner thickness.
GYRO TILT PLUSTM HEAVY DUTYHARDWARE
T-53
PLASTIC KEYWAY T-59
Available only in full cartons of 400 ft.
EXTRUDED IN 10 FT. LENGTHS
Product Code No. Wt. Lbs.
13.0
Length Product Code No. Wt. Lbs.per 100
30” 175.0
Structural Panel Thickness
Product Code No. Wt. Lbs.per 100
Packaging
8” 390.0 10
10” 445.0 10
12” 560.0 10
Product Code No. Wt. Lbs.
41.0
Product Code No. Wt. Lbs.
20.0
Special Order
Special Order
Special Order
T-51
Special Order
Special Order
DOUBLE CHAMFER STRIP T-58
Product Code No. Wt. Lbs. / Carton
20.27.12075 30.0
EXTRUDED PVC (POLYVINYL CHLORIDE) PLASTIC, .062” THICK
Shipped in 10 ft. lengths.Available in full cartons of 200 ft.
PRECAST& TILT-UP
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
184
SPECIAL DRILL-IN LIFT PLATET-75
TILT BRACKETT-66
ALUMINUM STRONGBACKSALUMINUM SPLICE PLATE ASSEMBLY
T-63T-63-S
QUICK RELEASE STRONGBACK BOLTT-62FOR USE WITH T-61 STRONGBACK INSERTSWITH WING NUT AND FLAT WASHER
Product Code No. Wt. Lbs.
5.9 Ea.
Description Product Code No. Wt. Lbs.
T-63 10’ Channel 118.0 Ea Set
T-63 15’ Channel 177.0 Ea Set
T-63 20’ Channel 236.0 Ea. Set
T-63 25’ Channel 295.0 Ea. Set
T-63-S Splice Assembly 28.0 Ea. Set
Type and Size Product Code No. Wt. Lbs. / Ea.
5” Bracket 60.25.66005 0.19
7” Bracket 60.25.66007 0.22
T-66 Tilt Bracket Shoe (single use) 60.25.66000 0.18
Product Code No. Wt. Lbs.
60.20.45001 33.0 Ea.
Special Order
Special Order
QUICK RELEASE STRONGBACK INSERTT-61FOR USE WITH T-62 STRONGBACK BOLTS
Structural panel Thickness
5” to 9” panel thickness
Size Product Code No.
1” x 6” 60.21.83060
1” x 7” 60.21.83007
1” x 9” 60.21.83009
1” x 12” 60.21.83012
T-68 ACA-1000 CONSTRUCTION SPRAY ADHESIVE
Product Code No. Size Can # Can/ Box Wt. Box
60.25.66100 17 oz. 12 20.0
13 oz. 12 16.8
PRECAST& TILT-UP
Serving Concrete Customers Since 1980.
www.atlasform.com
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
185
GROUND RELEASE IITM HEAVY DUTY HARDWARE
T-83
GROUND RELEASE IITM HEAVYDUTY INSERT
T-81
Ground Release II Inserts are shipped assembled (ready-to-use).Each insert is sized 1/8” less than panel thickness above.Requires a minimum concrete compressive strength of 2,500 psi.When ordering, specify overall panel thickness including structural thickness and aggregate or form liner thickness.
Product Code No. Wt. Lbs.
23.2 Ea.
Structural Panel Thickness
Type Product Code No.
Wt. Lbs.per 100
Packaging
8” Wire Based 60.21.40800 390.0 10
9” Wire Based 60.21.40900
10” Wire Based 60.21.41000 495.0 10
12” Wire Based 60.21.41200 560.0 10
Special Order
SUPERIOR LIFT TU INSERT T-110
Panel Thickness Item Description Product Code No. Wt. Lbs./ Ea.
5” T110- SUPERIOR LIFT 5” 60.21.10500 1.600
5-1/2” T110- SUPERIOR LIFT 5-1/2” 60.21.10550 1.650
6” T110- SUPERIOR LIFT 6” 60.21.10600 1.700
6-1/4” T110- SUPERIOR LIFT 6-1/4” 60.21.10625 1.725
6-1/2” T110- SUPERIOR LIFT 6-1/2” 60.21.10650 1.750
7” T110- SUPERIOR LIFT 7” 60.21.10700 1.800
7-1/4” T110- SUPERIOR LIFT 7-1/4” 60.21.10725 1.825
7-1/2” T110- SUPERIOR LIFT 7-1/2” 60.21.10750 1.850
8” T110- SUPERIOR LIFT 8” 60.21.10800 1.900
8-1/4” T110- SUPERIOR LIFT 8-1/4” 60.21.10825 2.530
8-1/2” T110- SUPERIOR LIFT 8-1/2” 60.21.10850
9” T110- SUPERIOR LIFT 9” 60.21.10900 2.560
9-1/4” T110- SUPERIOR LIFT 9-1/4” 60.21.10925 2.575
9-1/2” T110- SUPERIOR LIFT 9-1/2” 60.21.10950 2.590
10” T110- SUPERIOR LIFT 10” 60.21.11000 2.620
10-1/4” T110- SUPERIOR LIFT 10-1/4” 60.21.11025 2.650
10-1/2” T110- SUPERIOR LIFT 10-1/2” 60.21.11050
11” T110- SUPERIOR LIFT 11” 60.21.11100 2.480
11-1/4” T110- SUPERIOR LIFT 11-1/4” 60.21.11125 2.710
11-1/2” T110- SUPERIOR LIFT 11-1/2” 60.21.11150
12” T110- SUPERIOR LIFT 12” 60.21.11200 2.240
FOUNDATION PRODUCTS
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
186
WallVoid® System products provide temporary support systems for liquid concrete until the concrete sets and can support itself. They are ideal for concrete components that span across drilled piers, pads, intermittent footings, as well as other concrete work. The WallVoid® material, lying under structural concrete construction, absorbs ground moisture and loses strength only after the concrete has set, creating space into which soil can expand without causing damage.
Benefi ts of WallVoid® Products •Lightweight and easy to install. •Available either factory assembled or knock-down (KD) for lower shipping and storage costs. •Easily cut to shorter lengths for proper fi t. •Available in standard strengths and sizes, or can be custom manufactured to accommodate design and load specifi cations. •Placed end-to-end between drilled piers or spread footings. •End caps and seam pads available to prevent concrete from fl owing into void.
SonoVoid® Beam
Standard Sizes:width: 6”, 8”, 9”, 10”, 12”, 14”, 16”, 18” and 24”.height: 4”, 6”, 8”, 10” and 12”.Custom sizes available upon request.
Standard Strength: Approximately 1600-3000* PSF ultimate capacity. Approved for maximum Beam/Wall height of 10 feet Extra Strength: Approximately 2000-4500* PSF ultimate capacity.Approved for maximum Beam/Wall height of 16 feet * Ultimate capacity depends on product size.
Sonovoid® Slab
Standard Sizes: 4”, 6”, 8”, 10”, 12” thick.Custom sizes and strengths available upon request.
Standard Strength: Approximately 1000 PSF ultimate capacity. Approved for fl oors up to maximum 24” thick. Extra Strength: Approximately 1500 PSF ultimate capacity. Approved for fl oors up to maximum 36” thick. Super Strength: Approximately 2000 PSF ultimate capacity. Approved for fl oors up to maximum 48” thick.
SlabVoid® is a corrugated paper product that helps eliminate severe damage by creating a space between the structural concrete slab and underlying expansive soils. The SureVoid® material, lying under structural concrete construction, absorbs ground moisture and loses strength only after the concrete has set, creating space into which soil can expand without causing damage. SlabVoid® is designed to withstand the working load of the concrete construction process, then deteriorate with the absorption of moisture. Benefi ts of SlabVoid® Products •Lightweight and easy to install. •Available either factory assembled or knock-down (K.D.) for lower shipping and storage costs. •Easily cut to shorter lengths for proper fi t. •Available in standard strengths and sizes, or can be custom manufactured to accommodate design and load specifi cations. •Can be used to displace concrete volume where reduction in weight or cost is a consideration.
VOID FORMS
FOUNDATIONPRODUCTS
Serving Concrete Customers Since 1980.
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
187www.atlasform.com
WINDOW SYSTEMS
Easy WellThe Boman Kemp Easy-Well (or basement window well) is used to keep earth away from basement windows. It is designed to bolt directly to the Boman Kemp Easy-Buck or can be bolted to the wall during basement remodeling.
Safety GrateThe safety grate is made of rolled angle iron steel and steel safety bars. It is de-signed to keep people and pets out of the Easy-Well and hold the weight of standard foot traffi c.
Escape LadderThe safety ladder is designed to assist people in an emergency escape or egress. The safety ladder hangs in the back of the Easy-Well and is required in area wells that are deeper than 44” per IRC 2003.
WindowsThe Boman Kemp double insulated vinyl window comes equipped with a sliding sash, screen, and is lockable from the inside. It is available in white and almond color and is also can be ordered in both Low E and tempered glass.
CUSTOM FABRICATION
The Boman Kemp Easy-Buck and Easy-Well Basement Window System is now ICC approved. The Boman Kemp system is the ONLY one in the
industry to to be ICC approved and to receive an ESR number!
Atlas provides custom fabrication of steel beams and posts for residential basements as part of our product package for customers. Atlas offers standard sizes or can accommodate nearly any size for residential projects. Please contact your Atlas representative for further details.
TOOLS &PLACING
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
188
• Reduces Labor Costs • Portable, Easy to Use and Versatile • Reduces Material Cost • Easy to Clean • Reliable
Telescoping Spray LanceThe telescoping adjustable height spray lance makes extended height and distance applications easy to reach up to 40 feet (12.2 meters) when using the cone nozzle provided. Drastically reducing your application times and improving the safety of your employees. At only 8 lbs. the adjustable lance is light weight and easy to maneuver. This application lance has been designed with a coil hose on the outside making it easier to clean or replace when needed. Using a coil type hose has eliminated the extra hose, normally lying at your feet, that is typically associated with telescoping spray lances.
Features• Quick connect fitting- will easily connect to the REAL Pump Power Spraying System• Heavy duty chemical and crush resistant hose available in two colors• High impact, fully adjustable plastic spray tip holder• Large, comfort grip spray control handle with viton seals• Composite fiberglass, telescoping pole- easily adjusts from 8 feet to 24 feet with application spray heights up to 40 feet when using cone nozzle.• Interchangeable, quick connect spray tips •1 gallon per minute quick connect 1100 fan tip •Adjustable, quick connect cone nozzle- adjusts to create a fine mist or an additional 18 foot spray pattern for an overall effective distance of over 40 feet.• Telescoping pole can also be converted for use as a scrapper handle
Designed to spray:Form Oils & Other Release Agents : Concrete Sealers : Curing Compounds (Including White Wax Cures, High Viscosity & High Solids Products) : Stains
Herbicides : Deck Sealers & Cleaners : Acids (special wand required) : Bleach Solutions : Fertilizers : Pesticides : Cleaners And Many Other Products
REAL PUMPTM Power Spraying System
POWER SPRAYER
• All Steel Construction for Durability• Large Rubber Feet for Stability• Comes Fully Assembled• Multiple Power Options Available Including • 115VAC includes standard 9’ power cord • 230VAC includes standard 9’ power cord • 12VDC includes standard 25’ power cord w/ battery clamps• Complete spray Control Kit Includes • 1-spray Control Gun with comfort grip handle and quick connect, open flow fittings • 1-18” Straight Brass Wand Section • 1-18” Curved Brass Wand Section • 1-Adjustable Brass Fan Nozzle• 100’ Safety Yellow 3/8” Chemical Resistant Hose with quick connect open flow fittings• Chemical Resistant Diaphragm and Seals in Pump and Reel• Utilizes a circuit breaker instead of fuses, protecting the operator and eliminating the need to search for fuses. • Pressure sensitive switch shuts off pump when you stop spraying, to prevent bursting hoses and product separation or damage. • This feature can be by-passed with our pressure activated re-circulator to continuously re-circulate and mix the product you are spraying.
TOOLS &PLACING
Serving Concrete Customers Since 1980.
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
189www.atlasform.com
CONSTRUCTION EQUIPMENT
• Use to spray-apply Atlas Tech form releases, curing compounds, sealers and bondbreakers. • 3.0 gallon solid brass pump barrel, shut-off, 18” extension, and 1/2 gallon per minute brass fan tip nozzle.• 4.5” open head tank for easy fi lling and cleaning. TRI-POXY coated steel makes tank corrosion resistant and easy to clean.• Lightweight for easy use.• Comes with a comfortable carrying strap.
This open-head construction chemical sprayer isa top selling model and is unmatched for quality.
HAND PUMP SPRAYERS
SPRAY NOZZLESAtlas offers a wide array of spray nozzles to help contractors get the most out of each Atlas Tech Product. Most standard construction sprayers come with 0.5 gallon per minute fan spray tip, usually identifi ed as a #8005 tip. This number identifi es two characteristics of the tip: 1) #8005 - the degree angle of the tip (80 degrees) 2) #8005 - the fl ow rate (0.5 gallon/minute)
ELEPHANT TRUNKSMakes diffi cult wall pours easy. Made from durable polyvinyl chloride it is strong, lightweight, and ribbed for greater strength. It is easily affi xed to concrete hoppers by the use of band steel and hand tools.
CAMLEVERCONCRETE BUCKETS
MULTIQUIP CONSTRUCTION EQUIPMENT
Camlever concrete buckets feature high strength, light weight tubular construction. Accessories sold separately include chutes, top ring extensions, bucket boots, boot extensions, etc. Please contact Atlas Construction Supply for further information.
Multiquip offers a diverse construction equipment product line including concrete placement, concrete fi nishing, soil compaction, dewatering pumps and more. Contact Atlas Construction Supply for further information.
Vibratory Screeds • Concrete Pumps• Mortar MixersPower Trowels • Rebar Cutters & Benders • Generators & More!
CAPACITY TANK HOSE PUMP EXTENSION STRAP SHIP UNIT/ WGT
PRODUCT CODE NO.
3.0 G / 11.3L TRI POXY 42” / 1.06m 12”/ 300 mm Brass
18” / 455 mmBrass
Yes 1-10.16 lbs4.60 kg
80.20.10035
Type Product Code No.
#8002- bondbreakers 80.20.22102
#8003 - bondbreakers, low viscosity cures 80.22.22103
#8005 - cures, sealers, bonding agents 80.22.22105
#11010 - thick cures, bonding agents 80.22.22110
Fog Tip - form release agents 80.22.22000
Diameter Product Code No. Packaging
6” 80.12.50600 100’ roll
8” 80.12.50800 100’ roll
12” 80.12.51200 50’ roll
TOOLS &PLACING
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
190
The ChemGrout Sprayer/Finisher Series is specially designed to offer the fl exibility for both pump and spray applications. Its twin 45-gallon mixing tanks, pump and large holding hopper are all mounted on a single skid for quick, easy set-up and immediate operation. The low profi le mix tanks enable greater ease when dispensing bags of dry material, reducing operator fatigue and increasing productivity. The tanks feature high-effi ciency paddles that provide a rapid mixing cycle and ensure a smooth, consistent material mix. Each mix tank alternates feeding a centrally located holding hopper allowing for a continuous, non-stop process.
Complete with wheels, and only 31 inches wide, the CG-502 offers the mobility required to move quickly and easily through standard size doorways. The rugged steel frame stands up to the toughest jobsite conditions. Operator controls are centrally located for effi cient production. All components are easily accessible for operating, cleaning and maintenance.
The ChemGrout 2C4 pumps allows for a steady and continuous fl ow of material, ideal for self-leveling underlayments, fi ne non-shrink grouts and most other spray and injection applications. A hinged clean-out port has been added to suction housing for quick access and clean up.
GROUT PUMP
CG502 / 2C4 Skid Power Electric HydraulicMax Output Pressure 8 gpm (30 lpm), 174 psi (12 bar)
Required 1 phaseWeight 1000 lbs
Size 82” L x 31” W x 55” H
ChemGrout CG-502
Atlas Rents the ChemGrout CG-502
pump for self-leveling underlayment and fi ne grouting needs. Call an Atlas Representative for
details.
TOOLS &PLACING
Serving Concrete Customers Since 1980.
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
191www.atlasform.com
CONCRETE VIBRATORS
INTERCHANGEABLE RUBBER TIPS
Produces150 to 180lbs. offorce -12,000 to13,200 rpmvibratingfrequencies.Ideal forthinnest prestresssections.11” long.
Produces 440 to 535lbs. offorce 12,000 to13,200 rpmvibratingfrequencies.Excellent forthin prestresssections.14” long.
Produces730 to 880lbs. offorce 12,000 to13,200 rpmvibratingfrequencies.For thin wallsections orgeneralpurposevibrating.12” long.
Produces935 to 1130lbs. offorce 12,000 to13,200 rpmvibratingfrequencies.Goodgeneral purposehead size,12” long.
Produces 1130 to 1455lbs. offorce 11,000 to12,500 rpmvibratingfrequencies.All-aroundsize capableof handling stiff,low-slumpconcrete.13” long.
Produces 1530 to 2200 lbs. of force - 10,000 to12,000 rpm vibratingfrequencies.Ample forcefor stiffest,low-slumpconcrete.13½” long.
1-1/16”1-5/16”
1-9/16”1-3/4”
2-1/8”2-1/2”
MOTORSModel Weight HP Volts Amps Max Head Size Product Code No.
VME1500 12 lbs. 1.5 115 AC/DC 11 1-3/4” 80.15.11110VME2500 15.5 lbs. 2.5 115 AC/DC 13 2-1/2” 80.15.11120VME3000 19 lbs. 3.0 115 AC/DC 19 2-1/2” 80.15.11130
CORESModel Length Product
Code No.3’ 80.15.120105’ 80.15.12020
VBC7 7’ 80.15.12030VBC10 10’ 80.15.12040VBC14 14’ 80.15.12050VBC21 21’ 80.15.12060
CASINGSModel Length Product
Code No.3’ 80.15.130105’ 80.15.13020
VBCS7 7’ 80.15.13030VBCS10 10’ 80.15.13040VBCS14 14’ 80.15.13050VBCS21 21’ 80.15.13060
HEADSSize Model Radius of
EffectProduct
Code No.1-1/16” Steel VBH1116 4-5” 80.15.143101-5/16” Steel VBH1516 5-7”1-9/16” Steel VBH1916 10-13”1-3/4” Steel VBH134 15-17” 80.15.143402-1/8” Steel VBH218 17-21” 80.15.143502-1/2” Steel VBH212 21-24” 80.15.14360
INTERCHANGABLE RUBBER TIPSSize Model Product
Code No.1-1/16” VBRT1116 80.15.141101-5/16” VBRT1516 80.15.141201-9/16” VBRT1916 80.15.141301-3/4” VBRT134 80.15.141402-1/8” VBRT218 80.15.141502-1/2” VBRT212 80.15.14160
TOOLS &PLACING
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
192
LIGHTWEIGHT MAGNESIUM SCREEDS
CONCRETE TOOLS
ROUND FRESNO
SQUARE FRESNO
CONCRETE TROWELS
HAND AND WALKING EDGERS
POOL TROWELS• Other sizes available upon request
• Other sizes available upon request
• Other sizes available upon request
Various sizes and radii available.
Description Product Code No.
Screed Mag 6’ 80.40.11060
Screed Mag 8’ X 1-1/2” X 3-1/2” 80.40.11080
Screed Mag 10’ X 1-1/2” X 3-1/2” 80.40.11100
Screed Mag 12’ X 1-1/2” X 3-1/2” 80.40.11120
Screed Mag 14’ X 1-1/2” X 3-1/2” 80.40.11140
Screed Mag 16’ X 1-1/2” X 3-1/2” 80.40.11160
Screed Mag 20’ 80.40.11200
Description Product Code No.
12” x 4” 80.40.41330
16” x 4” 80.40.41530
18” x 4” 80.40.41630
Description Product Code No.
5” x 14” 80.40.42430
5” x 20” 80.40.41753
Description Product Code No.
5” x 24” 80.40.27115
5” x 36” 80.40.27125
5” x 48” 80.40.27150
Description Product Code No.
5” x 36” 80.40.27130
5” x 48” 80.40.27145
• Other sizes available upon request
• Other sizes available upon request
TOOLS &PLACING
Serving Concrete Customers Since 1980.
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
193www.atlasform.com
CONCRETE TOOLSCONCRETE TAMPERS
DIRT/STAMP TAMPERS
FLOOR SCRAPERS
OVERLAY SQUEEGEES
NAILS
TAPE
TAPE AND NAILS
Description Product Code No.
36” 80.40.13010
48” 80.40.13020
Description Product Code No.
10” x 10” 35.50.95010
12” x12” 35.50.95020
16” x 16” 35.50.95030
Description Product Code No.
5” x 14” 80.48.31300
5” x 18” 80.48.31400
5” x 22” 80.48.31500
Description Handle Product Code No.
24” Neoprene 6’ Standard 80.48.11024
30” Serated Edge 6’ Standard 80.48.11030
36” Neoprene 6’ Standard 80.48.11036
Description Product Code No.
6 Duplex 80.50.12110
8 Duplex 80.50.12120
16 Duplex 80.50.12130
6 Common 80.50.11110
Description Product Code No.
Duct Tape 80.75.12100
Duct Tape Red 80.7512120
Packaging Tape 80.75.13200
• Other types available varies by location
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
194
A-100 Bracket.....................................................25A-Clamp..............................................................21A-Deck...........................................................11-14ACS Wallform................................................26-27ADA Detectable Warning Panels......................159Abrasive Blades & Blocks.....................................2Adhesive Spray.................................................184Adjustable Coil Bolt .........................................61Adjustable Kicker..............................................143Adjustable Weld Angle Bracket ........................71Aggregates............................................................2Alisply..................................................................28AL-SPEED® Shoring Frame..........................8 - 10Aluminum Beam......................................8 - 10, 21Aluminum Grits (non-slip).................................155Aluminum Strongbacks.......................................21Aluminum Wall Forms.............................20-25, 30Anchor Bolts.......................................................67Anchor Bolt Sleeves .........................................67Anchoring Epoxy........................................105,126Angle Bracket................................................21,23Area Wells........................................................187Arcis Detectable Warning Panels.....................159Atlas Tech Products.....................................86-125
Backer Rod...........................................................2Bag Ties............................................................134Bar Chairs/ Supports.................................130-133Bar, Stripping.......................................................49Barlock Couplers...............................................137Barrier Dowel Aligner .......................................139Barrier Fencing.....................................................2Base Tie ..........................................................50Basket Clip........................................................140Basket, Dowel...................................................138Batter Washer................................................65,71Beam Bolster.....................................................131Beam Clip ..........................................................85Beam Form Systems.....................................18-19Bearing Pads........................................................2Bearing Plate......................................................45Bentonite Waterstop.........................................158Better Bar............................................................49Blankets, Curing................................................154Blind Side Walls.............................................30,44Bolsters.....................................................130-131Bolts...............................................................67,71Bolt Clamp..........................................................67Bondbreakers................................................96-97Bonding Agents.........................................100-107Bottom Jacks........................................................9Box Culvert Form System...................................31Box Voids..........................................................186Brace Anchor....................................................177Brace Anchor for Fill .......................................176Braces, Tilt-Up..................................................179Breakback Wrench .........................................49Bridge Deck Repair Products....................108-110Bridge Overhang Bracket..............................38-39Bulkhead Bracket...........................................21,23Bulkhead Form...................................................44Bullfl oats...........................................................192Burlap...............................................................154Burlene.............................................................154
Cap Plug ..........................................................78Capitol Forms.....................................................33
Castellated Steel Beams....................................17Catwalk Bracket.......................................21, 38-39Cement...................................................................2Cementitious Repair Products....................113-123Ceramar Expansion Joint..................................145Chamfer Strips....................................................41Chemical and Cement Products .................86-129Clamp Wallform System.................................26-28Cleaning Agent (for concrete)..............................98Closed Coupler....................................................73Coil Anchor/Tang...............................................178Coil Bolts ...........................................................60Coil Inserts.....................................................58-62Coil Loop Insert Straight.................................61-62Coil Nut Washer...................................................63Coil Nuts ...........................................................59Coil Rod ...........................................................59Coil Ties ...........................................................57Colored Concrete Systems........................128-129Color Hardener...................................124-125, 128Column Clamps..............................................32,35Column Forms................................................32-35Column Mounted Table Forms............................17Column Mounted Jacks.......................................38Composite Form Panel........................................27Concrete Buckets..............................................189Concrete Cleaner.................................................98Concrete Plugs....................................................53Concrete Pumps................................................189Concrete Restoration.................................102-123 Concrete Saws......................................................2Concrete Stamps............................42-43, 128-129Concrete Toppings.......................116-117, 128-129Cone Removal Wrench.......................................50Construction Spray Adhesive............................184Corewall Slotted Inserts.............................160-161Cork Expansion Joint ........................................145Corrosion Inhibitors.......................................2, 104Corrugated Wall Tie ..........................................77Couplers.............................................134-135, 137Crack Repair...............................................102-108Crossbraces.....................................................9-10Curb Forms........................................................143Cure Lap............................................................154Cure & Seal Compounds................................89-94Curing Blankets.................................................154Curing Compounds................................89-93, 127 Cushion-Lock Reglet...........................................84Cut Washer........................................................148
DBR Coupler......................................................134DBR Setting Splice Bars....................................134Deck Forms......................................................8-19Decorative Concrete Systems..................128-129Delta Tie Sandwich Panel..................................160Diamond Blades....................................................2Dobies................................................................133DOT Curing Compounds........................90-91, 127DOT Patch..........................................110, 115-116Double Chamfer Strip........................................183Double Flared Coil Loop Insert .........................62Double Flared Criss Cross Coil Loop Insert........64Double Flared Loop Insert...................................79Double Pickup Inserts........................................175Double Swivel Lifting Plate................................180Double Tee Specialty Anchor.............................173
Dovetail Anchor Slot ..........................................77Dovetail Anchors..................................................77Dowel Bar Splicer(DB-SAE)..............................135Dowel Baskets...................................................138Dowel Caps................................................139-140Dowel-In (D-l).....................................................135Dowels.........................................................139,155D/R Shebolt..........................................................72D/R Taper Tie.......................................................69D/R Threadbar......................................................59Drainage Channels.....................................150-152Drip Strips............................................................41Drophead Shoring System..............................11-14DSI Rod...............................................................45Drop-In Anchors................................................2,64Ductile Embed (SAE) ..........................................81Dustproofer / Sealer / Hardener...........................95Dynamic Leg Shoring System..............................15
Edge Form.........................................................143Edge Form Brace...............................................143Edge Lifting Plate...............................................180Edge Pick-Up Insert, Double..............................176Edge Pickup Insert, Single.................................176Edgers (hand)....................................................192Elephant Trunks.................................................189End Pick-Up Insert, Double...............................178End PIck-Up Insert, Single................................178Epoxies...............................................102-109, 126Epoxy Coatings..................................................127Epoxy Grout.......................................................126Epoxy Injection...................................102-105, 126Epoxy Mortar.....................................................116Epoxy Retention Ring........................................140Erection Anchors...............................................171Erosion Control Products.......................................2Evaporation Retarder...........................................91Expanded Coil Insert ..........................................81Expanded Metal..................................................44Expanded Polystyrene.......................................149Expansion Joint Fillers.......................................145Eye Anchors.......................................................162Eye Bolt ............................................................79Eye Nut ............................................................79E-Z Chair............................................................132
Fasteners...............................................................2Fencing, Silt & Barrier............................................2Ferrule Instead of a Coil......................................84Ferrule Loop Insert (Straight)..............................82Fiberglass Column Forms...................................33Fiberglass Rod....................................................74Fiber Expansion Joint........................................145Fibre Forms.........................................................34Finish Machines.................................................189Finishing Aid........................................................91Fitting-Up Bolts and Nuts.....................................71Flared Thin Slab Insert (Coil) .........................82Flared Thin Slab Insert (Ferrule) .........................82Flat Foot Anchors..............................................172Flat Tie ................................................................48Flat Washer....................................................45, 58Fleet Lift System.........................................170-174Flex Form System................................................29Floats.................................................................192Floor Coatings...................................................127Floor Cover........................................................154Floor Hardeners..................................124-125, 127
Item Page No. Item Page No. Item Page No.
INDEX BY PRODUCT NAME
Serving Concrete Customers Since 1980.
10-FOR
MIN
G
& SH
OR
ING
20-FO
RM
ING
A
CC
ESSOR
IES30-ATLA
S TECH
PR
OD
UC
TS40-B
AR
SUPPO
RTS
50-FLATWO
RK
A
CC
ESSOR
IES60-PR
ECA
ST &
TILT-UP
70- FOU
ND
ATION
PRO
DU
CTS
80- TOO
LS &
PLAC
ING
195www.atlasform.com
Item Page No. Item Page No. Item Page No.
INDEX BY PRODUCT NAME
Floor Scrapers...................................................193Floor Underlayments..........................118-119, 127Flying Deck Forms...................................14, 16-17Foam (for use with Recess Member)................174Footing Ties..........................................................2Form Board.......................................................143Form Clamp........................................................70Form Panels..................................................31, 40Form Patch and Magnetic Setting Tool...............85Form Release Agents....................................87-88Form Spacers...................................................132Form Spreaders..................................................49Form Systems................................................8 - 35Form Tie System......................................21, 23,45Formliners......................................................42-43Frame Connector...................................................9Fresnos.............................................................192
Ganged Aluminum Wall Forms...........20-25, 29-30Garage Beam Forms.....................................18-19Generators........................................................189Geosynthetics/Geotextiles....................................2Graffi ti Remover....................................................2Grates for Trench Drain.............................150-152Ground Release II Insert...................................181Ground Release II Insert (HD)..........................185Ground Release II Lifting Hardware..................181Ground Release II Lifting Hardware (HD).........185Ground Release II Patch Caps.........................182Ground Release II Spreader Beam...................182Grouts.................................................111-112, 127Grout Pumps..............................................118,190Grout Retention Ring........................................140Guard Rail Post...................................................37Gyro Tilt Plus Edge Lift Insert............................182Gyro Tilt Plus Face Lift Insert............................182Gyro Tilt Plus Insert (HD).................................183Gyro Tilt Plus Hardware....................................183Gyro Tilt Plus Hardware (HD)...........................183
Handle Coil Nut...................................................64Handset Deck Forms.......................................8-13Hardener (Dry-Shake).......................124-125, 127Hardener (Liquid).........................................95,127HDO Plywood......................................................40He-Bolt................................................................73Header Forms...................................................143Header Form Support...............................143, 147Heavy Coil Hex Nuts...........................................63Hex Coupling Nut................................................68High Chairs................................................130-132Holding Plate.....................................................174Holding Rod......................................................174HookTie.........................................................44, 47
Injection Resins.................................102-105, 126Insert Locator Plug............................................180InsertionTool........................................................54Inside Tie Rod.....................................................66Integral Color.............................................128-129Intersectional Chairs..................................130-132Inverted Brace Achor........................................177
Jahn ”A” Bracket.................................................55Jahn ”C” Bracket.................................................55Jahn Cornerlock..................................................55Jahn Eccentric.....................................................56Jahn Rivet...........................................................56
Jahn Scaffold Jack..............................................56Jahn Tie Extender................................................55Joint Caps.........................................................146Joint Forming System........................................155Joint Repair Products.................106-110, 126-127Joint Sealants............................106-107, 126-127Joists (Flying Deck Form)...................................16Jumbo Shore.......................................................36Jump Form Systems......................................24-25Jump Shoe..........................................................25
Keyway...............................................................183Korolath Bearing Strips.....................................168Korolath Core Plugs..........................................169Korolath Heavy Duty Shimpaks........................168Korolath Horseshoe Spacer Strips....................169Korolath Shim Strips.........................................168
“L” Anchor..........................................................171“L” Leg Inserts.....................................................80Laminated Veneer Lumber (LVL)........................40Lead Plugs..........................................................45Lift Plate (Drilled)...............................................184Lifting Anchors...................................................162Lifting Angle.......................................................177Lifting Eyes........................................................161Lifting Lug...........................................................21Lined Tube.....................................................33-34Liquid Bonding Agents...............................100-101Load Key...........................................................147Load Transfer Joint System..............................155Loop Ferrule Insert..............................................78Loop Strongback Tie...........................................55LoopTies..............................................................51LVL Beams.................................................8-13, 40
Magna Jaw..........................................................73Median Barrier Forms...........................................2Mesh Supports...........................................130-133Methacrylate......................................................110Mike Bracket........................................................44Mixers........................................................189-190Modular Form Systems............................26-28, 31Moisture Barrier..........................................153-154Moisture Retaining Cover..................................154
Nails..................................................................193Non-Shrink Grouts......................................111-112Non-Slip Finish..................................................155Nut Washer (Acme).............................................68
Omni Wedge.......................................................47On-Site Pipe Bace.............................................179One-Sided Wall Forms...................................30,44OSHA Regulations.............................................4-5Overhang Bracket..........................................38-39Overlays (Decorative)................................128-129Overlays (Structural)....................109-110, 114-117
Panel Pads........................................................167Paper Tubing.....................................................148Parking Structure Form Systems...................18-19Patching Products......................................113-126Pencil Rod...........................................................69Pipe Brace.........................................................179Pipe Turning Device..........................................167Plastic Cap for Expansion Joint........................146Plastic Cones for Coil Ties..................................63
Plastic Cones for Snap Ties...............................46Plastic Cones for Taper Ties...............................45Plastic Cone Removal Wrench...........................61Plastic Keyway..................................................183Plastic Plug.........................................................85Plastic Rebar Guards.......................................140Plastic Setback Plug...........................................65Plastic Setting Bolt............................................160Plastic Sleeves (for ties).....................................45Plastic Zip Strip Joint Former............................146Plate Anchor.....................................................172Plate Washer..................................................45,58Plugs, Tie Hole..............................................45,53PlyLag................................................................63Plywood Form Panels.........................................40Polydrain...................................................150-152Polyester Concrete Overlays............................110Polyethylene Film.............................................154Polymer Concrete.......................109-110, 114,116Polystyrene.......................................................149Polyureas..........................................................127Polyurethane Sealants......................................107Portland Cement...................................................2Post Shore..........................................................36Post Shore Clamp (4x4).....................................56Post-Tensioned Slab Products.........................130Power Sprayers................................................188Power Trowels..................................................189Precast Accessories..................................160-174Precast Trench Drain................................150-152Protective Rebar Covers..................................140Pumps................................................118,189-190PVC Sheeting.......................................................2PVC Sleeve........................................................45PVC Waterstop..........................................156-157
Quantum-Cure....................................................89Quick Release Strongback Bolt........................184Quick Release Strongback Insert.....................184
Radius Formers..................................................41Radius Wall Forms........................................28-29Rail Fastener Embed (RT-SAE).........................81Rebar................................................................141Rebar Clip and Form Spreader...........................71Rebar Couplers........................................135, 137Rebar Cutters & Benders.................................189Rebar Guards, Plastic......................................140Rebar Supports.........................................130-133Recess Members..............................................174Recess Plugs (Fleet Lift)..................................174Recess Plugs (Swift Lift)...........................163-164Reinforcing Bar for Swift Lift Anchors...............164Removable Plastic Cap Strips..........................146Repair Mortars...........................................113-122Reshore Products...................................36, 38, 56Retarders............................................................99Ring Clutches...................................................170Riser Frames....................................................148Rock Anchor (Coil Thread).................................64Rocket/Kohler Ferrule Insert...............................80Rod Clamp..........................................................69Rod Clamp (Superior).........................................70Rollerback Carriage............................................25Round Column Forms...................................33-34Round Stakes...................................................144
Contractor Committed.
www.atlasform.com
10-F
OR
MIN
G
& S
HO
RIN
G
20-F
OR
MIN
G
AC
CES
SOR
IES
30-A
TLA
S TE
CH
PR
OD
UC
TS40
-BA
R S
UPP
OR
TS
50-F
LATW
OR
K
AC
CES
SOR
IES
60-P
REC
AST
&
TIL
T-U
P70
- FO
UN
DAT
ION
PRO
DU
CTS
80- T
OO
LS &
PL
AC
ING
196
Item Page No. Item Page No. Item Page No.
INDEX BY PRODUCT NAME
Safety Notes......................................................6-7Safety Rail Post..................................................37Sand.....................................................................2Sand Plate........................................................132Sandwich Panel Erection Anchor......................171Scaffold Bracket (Jack).................................38, 56Scissor Clamps...................................................35Screed Bracket..................................................146Screed Key........................................................147Screed Pad.......................................................146Screed Post......................................................146Screeds (Magnesium).......................................192Screeds (Vibrating)...........................................189Screw Anchor......................................................75Screw Anchor Bolt Setting Template...................75Screw Anchor Bolts .........................................75Screw Anchor Eye Bolts.....................................75Screw Anchor Setting Bolt..................................75Screwjacks.......................................................8 - 9Sealants, Urethane............................................107Sealers...................................................92-95, 127Self-Leveling Topping.................................116-117Self-Leveling Underlayment.......................118,127Set-EEZ Lubricant.............................................178Shake-On Floor Hardeners................124-125, 127She Bolt ......................................................45,72She Bolt (Outside Stud Rod)...............................68Shear Bar..........................................................173Shear Bar For Swift Lift Anchors ......................164Shelf Angle Insert................................................76Shim Packs.......................................................168Shoring Systems..............................................8-19Shotcrete..............................................................2Shoulder Eye Bolt .........................................79Silane / Siloxane Sealers..................................127Silica Sand............................................................2Single Flared Coil Loop Insert.............................62Single Pickup Insert..........................................175SL Anchors........................................................162SL Attachment Nut............................................167SL Attachment Stud with Wing Nuts.................165SL Countersunk Screw.....................................165SL Eye Anchor..................................................162SL Lifting Eyes..................................................161SL Plus Coil Wing-Nut......................................166SL Recess Plugs ..............................................163SL Rubber Ring For Steel Recess Plug............164SL Safety Pin with Washer................................166SL Setting Plate with Countersunk Screw.........165SL Steel Recess Plug.......................................164SL Stud.............................................................165SL Tapped Plate................................................166SL Throw-Away Recess Plug...........................163SL Universal Lifting Eyes..................................161SL Wing Nut......................................................166Slab Bolsters..............................................130-133Slab Grabbers.....................................................37Smooth Dowels.................................................139Snap Tie Shank Wrench.....................................49Snap Ties............................................................46Snap Tie Wedges................................................47Soil Stabilization Products.....................................2Sonotube.............................................................34Space Wheels...................................................132
Spandrel Hook Tie..............................................47Spandrel Plate Tie..............................................47Spandrel Point Tie..............................................47Special Anchor......................................................2Special Drill-In Lift Plate....................................184Speed Dowels...................................................155Speed Step.........................................................56Speedy Bracket...................................................54Splice Bars.................................................134-135Spray Tips.........................................................189Sprayers....................................................188-189Spreader Beam.................................................182Spreader Cleats..................................................49Squeegees........................................................193Stainless Steel Snap Tie....................................50Stains, Color..............................................128-129Stake for Dowel Baskets..................................139Stake tor Screed Key and Load Key.................147Stakes...............................................................144Stamps, Textured Mats.....................................128Star Inserts.......................................................169Stayform..............................................................44Steel Stakes......................................................144Steel-Ply..............................................................31Stencils......................................................128-129Stiffback Bracket.................................................54StrapTie ...........................................................48Stripping Bar.......................................................49Strongback Tie....................................................50Stud Rail...........................................................136Styrofoam..........................................................149Supertie Fiberglass Rod.....................................74Supertie Gripper..................................................74Supertie Spreader Clip........................................74Supertie Waler Wedge........................................74Supertie Waterstop.............................................74Supertie Wedge..................................................74Sure-Guard Rebar Protector.............................140Sure-Lock Bracket..............................................53Sure-Lock Strongback Clamp............................54Sure-LockTie.......................................................53Sure Plug ...........................................................54Sure Plug Insertion Tool......................................54Sure-Snap Wrench Head Snap Ties...................46Surface Retarders...............................................99Swift Lift Plus Holding Stud with Wing Nut........165Swift Lift Plus Plates .......................................166Swift Lift Plus Recess Plug...............................163Swift Lift System........................................161-167Swivel Lifting Plate...................................178, 180
“T” Anchor.........................................................172Tampers............................................................193Tang, Coil Anchor..............................................178Tape..................................................................193Taper Ties................................................45, 68-69Tension Bar.......................................................173Thin Slab Ferrule Insert......................................78Threaded Bar.................................................45,59Threaded Inserts................................................76Threaded Plastic Plug........................................84Threaded Pullout Tie..........................................47Threaded Steel Setting Plugs............................83Tie Key...............................................................48
Tie Plate.......................................................21, 23Tie Wire............................................................133Tightening Wrench..............................................70Tilt Bracket (Edge Form) ..................................184Tilt-Up Accessories....................................175-185Tilt-Up Braces....................................................179Tip To Tip Tie.......................................................47Toggle Pins............................................................9Top Jacks..............................................................9Toggle Coil Ties...................................................64Tower Chairs.....................................................132Trench Drains.............................................150-152Triple Flared Coil Loop........................................65Trowels..............................................................192Trowels, Power..................................................189Truss & Joist Tables.............................................16Truncated Domes..............................................159Tube Forms....................................................33-34Turnbuckle Form Aligner......................................49Two-Hole Anchor................................................171Type L Inserts......................................................83Type B-4 Cushion-Lock Reglet............................84
Underlayments............................................118,127Urethane Coatings.............................................127Utility Anchors...................................................167
Vapor Retarders.........................................153-154Vibrators............................................................191Vibratory Screeds..............................................189Visqueen....................................................153-154Void Forms.................................................149,186
Wale Bolt Assembly.............................................61Wale Holder.........................................................62Waler Jack...........................................................38Waler Tie.............................................................52Wall Clamps.......................................21, 23, 26-27Wall Forms.....................................................20-31Wall Plug.............................................................78Washer Plates.....................................................58Water Plug.........................................................122Water Repellents..............................................127Waterproof Coating...........................................123Waterstops.................................................156-158Wedge (for use with Recess Member)..............174Wedge Anchors.....................................................2Wedge Bolt..........................................................52Welded Wire Fabric...........................................142Welding Coil Tie..................................................58Wheels (Plastic Form Spacers).........................132Window Systems...............................................187Wing Nut (Coil Thread)........................................65Wing Nut (Threaded Bar)..............................45, 59Wire Mesh.........................................................142Wood Chamfer.....................................................41Wrench Head Snap Tie Socket...........................50
X FlatTie..............................................................48YokeBracket........................................................23Z Tie Holder.........................................................52Zip Strip Joint Former........................................146