catalog materiale electrice fluke

7/27/2019 Catalog Materiale Electrice Fluke

1/140

20122013Test Tools Catalog

Digital Multimeters

Clamp Meters

Electrical Testers

Insulation Testers

Earth Ground Testers

Installation Testers

Portable Appliance Testers

Digital Thermometers

Thermal Imagers

Distance Meters

Indoor Air Quality Tools

ScopeMeter Test Tools

Power Quality Tools

Field Calibrators

Vibration Tester

Radiation Tester

EX Test Tools

Accessories


2/140

Fluke web and electronic newsletter ................... ....................... .......... 1New from Fluke........................................................................................2-3Fluke Combo Kits .....................................................................................4-5

Application/background articles ......................................................6Fluke After Sales Service ..................................................................7Fluke where safety is built in ..........................................................8-9Fluke web/campaign .........................................................................10

Digital Multimeters ............................................................................11DMM Selection Guide .......................................................................12280 Series Digital Multimeters ...................... ....................... .......... 13233 Remote Display Multimeter ..................... ....................... .......... 1480 Series V Digital Multimeters .......................................................15170 Series Digital Multimeters ........................................................16110 Series II Digital Multimeters .....................................................1727 II / 28 II Rugged Industrial Multimeters ....................................1877 IV Digital Multimeter ...................................................................1988V Automotive Meter ......................................................................208845A/8846A 6.5 Digit Precision Multimeters ............................... 21

8808A 5.5 Digit Multimeter ..............................................................22

Thermal Imagers ...............................................................................58Ti Series Thermal Imagers ...............................................................59Ti32/Ti29/Ti27 Industrial Thermal Imagers ................................... 60-61TiR32/TiR29/TiR27 Industrial Thermal Imagersfor Building Diagnostics ...................................................................62-63Ti125/Ti110/Ti100 Industrial / Commercial Thermal Imagers .... 64-65TiR125/TiR110/Ti100 Building Diagnostic Thermal Imagers ....... 66-67Ti9/Ti10/Ti25 Thermal Imagers ......................................... .............. 68-69TiS/TiR/TiRx/TiR1 Thermal for Building Inspection ..................... 70-71

Hawk IR CRange IRWindows ...........................................................72

Digital Thermometers .......................................................................49Infrared Thermometer Selection Guide .................... ..................... 50

570 Series Precision Infrared Thermometers ...................... .......... 5160 Series Infrared Thermometers ...................................................52566/568 Multipurpose Thermometers ....................... ..................... 53561 Multipurpose Thermometer .....................................................5450 Series II Thermometers ...............................................................551523/1524 Reference Thermometers ..............................................561551A/1552A Ex Stik Thermometers ...........................................57

Installation Testers/Portable Appliance Testers ..............................431650 Series Multifunction Installation Testers.............................. 44-456000 Series Portable Appliance Testers ................................ .......... 46-471650/6000 Series Accessories ...........................................................48

Insulation Testers/Earth Ground Testers ......................................... 35Insulation Tester Selection Guide ...................................................361577/1587 Insulation Multimeters ..................................................371503/1507 Insulation Testers ...........................................................381555/1550C Insulation Resistance Testers ...................... .............. 391620 Series Earth Ground Testers ...................................................401621 Earth Ground Tester ..................... ....................... ..................... 411630 Ground Loop Tester ...................... ....................... ..................... 42

Clamp Meters and Electrical Testers ................................................23Clamp Meter selection guide ...........................................................24381/365 Clamp Meters ......................................................................25370 Series Clamp Meters ..................................................................26320 Series / 902 Clamp Meters.........................................................27353/355 AC/DC Clamp Meters ...................... ...................... .............. 28360 Current Leakage Clamp Meter .................................................29T100 Series Voltage/Continuity Testers ..................... ..................... 30T5/T5-H5-1AC Kit Electrical Testers................................................312AC/1AC-II/LVD1/LVD2 Voltage Detectors......................................329040/9062 Phase Rotation Indicators ..................... ...................... ... 332042 Cable Locator ............................................................................34

Indoor Air Quality Tools ....................................................................75975 Air Meter................... ....................... ...................... ...................... 76922 Airflow Meter ....................... ...................... ...................... ........... 77971 Temperature Humidity Meter ..................... ....................... ....... 78983 Particle Counter ...................... ...................... ....................... ....... 79

Field Calibrators .................................................................................101Field Calibrator Selection Guide..................... ...................... ........... 102750 Series Documenting Process Calibrators ..................... ........... 103726/725/725Ex Multifunction Process Calibrators ........................ 104724 Temperature Calibrator .................... ....................... .................. 105712/714 Temperature Calibrators ....................... ...................... ....... 106914X/418X Drywells/IR Calibrators ................... ....................... ....... 107717/718/718Ex/719 Pressure Calibrators ....................... .................. 108705/707/707Ex/715 Loop Calibrators ..................... ...................... .... 109771/772/773 mA Clamp Meters ....................... ...................... ........... 110787/789 ProcessMeters...................... ...................... ...................... .... 111Field Calibrator Accessories .................... ....................... .................. 112

Power Quality Tools ...........................................................................87Power Quality Selection Guide ....................... ...................... ........... 88345 Power Quality Clamp Meter ..................... ...................... ........... 8943B Single-phase Power Quality Analyzer ...................... ............... 901710 Single-Phase Voltage Quality Recorder ................................. 91430 II Series Three-phase Power Quality Analyzers ..................... 92-931735 Power Logger ..................... ....................... ...................... ........... 941740 Series Power Quality Loggers..................................................951750 Power Recorder ..................... ...................... ....................... ....... 961760 Power Quality Recorder ...................... ...................... ............... 97Power Quality Current Clamp Accessories ..................... ............... 98Norma 4000/5000 Series ....................... ...................... ...................... 99-100

ScopeMeter Test Tools......................................................................80ScopeMeter 190 Series II ...................... ...................... ...................... 81-83ScopeMeter 120 Series ........................................ ...................... ....... 84ScopeMeter 225C/S and general specifications ............................ 85ScopeMeter Accessories ................... ...................... ....................... ... 86

Fluke. Keeping your world up and running

Contents

Laser Distance Meters .......................................................................73421D/416D/411D Laser Distance Meters .................................... .... 74

General Accessories...........................................................................120Electronic Test Leads, Probes & Clips ................... ...................... .... 121Industrial Test Leads, Probes & Clips.................... ...................... .... 122-123-124Automotive Accessories ....................... ...................... ...................... 125Current Clamps ...................... ...................... ...................... ............... 126-127Temperature Accessories ..................... ...................... ...................... 128-129Cases and Holsters .................... ....................... ...................... ........... 130-131Software and Other Accessories .................... ...................... ........... 132Other Accessories...................... ....................... ...................... ........... 133Fuse and Warranty Information........................ ....................... ....... 134

ATEX Certified Test Tools ............................................ ...................... 117

A brief look at ATEX ...................... ...................... ....................... ....... 118Fluke intrinsically safe tools................... ....................... .................. 119

Vibration Tester ............................................. ..................................... 113810 Vibration Tester ...................... ...................... ....................... ....... 114

Radation Meter ...................................................................................115481 Radation Meter ................... ....................... ...................... ........... 116


3/140

Fluke Web andElectronic Newsletter

E-Test-it! is Flukes regular newspublication or proessional test toolusers. It is electronically available 6times per year. You will be the irst tohear about:

New Fluke products The latest actions and promotions rom Fluke How to get more out o Fluke tools How to use Fluke tools better in your

application

Exclusive oers, promotions and discounts onFluke Merchandizing Exclusive oers on Fluke ex-demo equipment

E-Test-it! is ree o charge. I at any point in timeyou do not want to receive E-Test-it! anymore,you can unsubscribe with a simple mouse click.E-Test-it! is small in size (on average about 12KB) and does not fll up your mailbox or takelong to download.

Try it now and sign-up for your FREEe-Test-it! subscription.Go to the Fluke web site and fill in theon-line subscription form.

Fluke web

Electronic Newsletter

Fluke web sites are available in all countries around the world and in 18 different languages.

Complete inormationThe most complete and in-depth resource orinormation on Flukes products and servicesincluding: Product inormation Solution Centers Interactive selection guides Virtual product demonstrations Extended specifcations Application notes Product manuals Service inormation Promotions Prices

Where to buy Distributor and sales ofce locations

Find inormation astTo quickly fnd more inormation on Flukeproducts, use the Search by model box in thetop let corner o our web pages. All you have todo is type in the model number.

UK: www.fluke.co.ukIE: www.fluke.ieWorldwide: www.fluke.com


4/140

New from Fluke

For the frst time, plant maintenance engineers and technicians cantake a high-perormance our-channel scope into the harsh world oindustrial electronics.

See page 81-83.

The new 1654B Installation Tester builds upon the rugged reputation o the earlier1650 Series, only its re-designed to meet your need or moreproductive test tools.

See page 44 and 45.

Fluke 750 series process calibrators can help you get the job done aster. It does somany dierent tasks, so quickly and so well, its the only process calibrator you needto carry.

See page 103.

The new Fluke 381 does everything you would expect rom a clamp meter, and thenlets you remove the display or even more exibility.

See page 25.

Fluke 190 Series II Scopemeter

Fluke 1654B Multifunction Installation Tester

Fluke 750 series Documenting Process Calibrators

Fluke 381 Remote Display True-rms AC/DC ClampMeter with iFlex

Fluke proudly introduces an entry level thermal imager or quick, easy, andaccurate problem identifcation and troubleshooting designed specifcally or

the building inspection proessional.

See page 70 and 71.

The Fluke 365 is a new, innovative Fluke clamp meter, oering a thin,small jaw design that makes it easy to get around tightly packed wires.

See page 25.

With this new amily o clamp meters, Fluke provides a range o state o-the-artcapabilities to meet users most demanding requirements or exibility, saety and

perormance.

See page 26.

Fluke TiS Thermal Imaging Scanner

Fluke 365 Detachable Jaw True-rms AC/DC Clamp Meter

Fluke 370 series Clamp Meters


5/140

New from Fluke

Designed or industrial and commercial environments, the Fluke P3 series o thermalimagers deliver superior image quality, versatility, and aordability without compromise.

See page 60-63.

The new Fluke 434, 435 and 437 Series II models help locate, predict,prevent, and troubleshoot power quality problems in three-phaseand single-phase power distribution systems.

See page 92-93.

The new 1555 and redesigned Fluke 1550C insulation resistance testers oer digitalinsulation testing up to 10kV, making them ideal or testing a wide range o highvoltage equipment including switchgear, motors, generators and cables.

See page 39.

Fluke Ti27/Ti29 Thermal Imagers

Fluke 430 Series IIThree-Phase Power Quality and Energy Analyzers

Fluke 1555/1550C Insulation Resistance Testers

Fluke proudly introduces fve new thermal imagers specifcally designed to help you domore in less time, while being at home in the harshest o environments. A project thatmight normally take an hour can now be done in minutes. Our newest imagers are the

lightest, most rugged, easiest-to-use proessional imagers you can buy.

See page 64-67.

Accurate and repeatable to 0.05 C over its ull range, the 1551A/1552A StikThermometer is the new gold standard o industrial temperature calibration.

See page 57.

The new Fluke TL175 TwistGuard Test Leads are the innovative test leads with adjustablelength test tips or use in dierent measurement environments.

See page 124.

Ti125/Ti110/Ti100/TiR125/TiR110 Thermal Imagers

1551A Ex and 1552A Ex Stik Thermometer

TL175 Twistguard Test Leads


6/140

Fluke Combo Kits

Fluke 179/TPAK179/ToolPak Combo Kit Fluke 179 True RMS

Multimeter TPAK ToolPak Meter Hanging

Kit

Fluke 87V/E2Industrial ElectricianCombo Kit Fluke 87V True RMS

Multimeter TL224 SureGrip Silicone Test

Lead Set TP38 Slim Reach Test Probe

Set (insulated) AC220 SureGrip Alligator

Clip Set TPAK Magnetic Hanger 80BK-A Integrated DMM

Temperature Probe

C35 Sot Meter Case

Fluke 179/EDA2 KitElectronics Combo Kit Fluke 179 True RMS


Lead Set TL910 Electronic Test Probe

Set AC280 SureGrip Hook Clip

Set TPAK Magnetic Hanger 80BK-A Integrated DMM

Temperature Probe C35 Sot Meter Case

Fluke 179/61 KitMultimeter and InraredThermometer Combo Kit Fluke 179 True RMS

Multimeter Fluke 61 Inrared

Thermometer C550 Hard Meter and

Accessory Case

Fluke 179/MAG2 Kit

Industrial Combo Kit Fluke 179 True RMS


Lead Set AC220 SureGrip Alligator

Clip Set TP74 lantern tip test probe set TPAK Magnetic Hanger 80BK-A Integrated DMM

Temperature Probe C35 Sot Meter Case + Maglite ashlight

Fluke 117/322 KitElectricians Combo Kit Fluke 117 True RMS

Multimeter Fluke 322 Clamp Meter Silicon test lead set TPAK Magnetic Hanger C115 Deluxe carrying case

with shoulder strap

Fluke 87V/i410Combo Kit or IndustrialApplications 87V Industrial Multimeter TL75 Test Leads AC172 Alligator Clips i410 400A AC/DC Current

Clamp 80BK-A Temperature Probe C115 Sot Carrying Case

(Not available in all countries)

Buy a Combo Kit and save

Ordering Information

Fluke 117/322 KitFluke 179/TPAKFluke 179/61 KitFluke 179/MAG2 KitFluke 179/EDA2 KitFluke 87V/E2Fluke 87V/i410


7/140

Fluke Combo Kits

Fluke T5-600/62/IAC-E Kit Fluke T5-600 Electrical Tester

Fluke 62 Mini IR Thermometer Fluke 1AC-II Volt Alert C115 Sot Meter Case

Fluke T5-H5-1AC Kit Fluke T5-1000 Electrical Tester H5 Holster 1AC-II Volt Alert

Fluke 1587/ET AdvancedElectrical Troubleshooting Kit Fluke 1587 Insulation Multimeter Fluke 62 Mini Inrared

Thermometer I400 Current Clamp

Fluke 1587/MDTAdvanced Motor & DriveTroubleshooting Kit Fluke 1587 Insulation

Multimeter Fluke 9040 Phase Rotation

Indicator I400 Current Clamp

Fluke 62/322/1AC Kit Fluke 62 Mini IR Thermometer Fluke 322 Clamp Meter

Fluke 1AC-II Volt Alert

Fluke 411D/62 Kit Fluke 411D Laser Distance

Meter Fluke 62 Mini IR Thermometer Sot case or each model

Fluke 289/FVF IndustrialLogging Multimeter andSotware Combo Kit Fluke 289 True-RMS

Multimeter FVF-SC2 FlukeView Forms

Sotware and cable Silicon Test Lead Set AC172 Alligator Clips 80BK-A Integrated DMM

Temperature Probe TPAK Magnetic Meter Hanger

or hands-ree operation

C280 Sot Case or meterprotection and accessorystorage

Buy a Combo Kit and save


Fluke 287/FVFFluke 289/FVFFluke 1587/ETFluke 1587/MDTFluke T5-H5-1AC KitFluke T5-600/62/IAC-E KitFluke 62/322/1AC Kit

Fluke 411D/62 Kit

Fluke 287/FVF FlukeViewForms Combo Kit Fluke 287 True RMS Electronic

Logging Multimeter withTrendCapture

FVF-SC2 FlukeView FormsSotware and cable

80BK-A Thermocouple Probe CAT III 1000 V 10 A Modular

Test Leads (red, black) CAT II 300 V 5 A Alligator Clips

(red, black) C280 Sot Case or meter

protection and accessorystorage

Fluke 1587/MDT


8/140

Application/background articles

As part o our commitment to supporting you in your work we domore than just design and manuacture rugged and versatile test tools:we also provide application notes which all can be downloaded romour web site. Furthermore check out our total solutions campaignson the website. In addition to inspection tips and helpul applicationinormation, these campaigns also oer advice on picking the right toolor the job.


9/140

So why should you use Fluke service? Original manuacturers parts used All instruments reviewed or latest updates Repair warranty that covers whole unit In depth product knowledge Accredited calibrations available Traceable calibrations available on all

products Full check o unit during verifcation cycle Full saety test on mains powered units

What other instruments can we helpyou with?We also oer a range o calibrations andrepairs on other manuacturers equipmentupon request. Manuacturers such as: Tektronix Agilent Bruel & Kjaer Philips Megger Seaward Kewtech Lecroy Hioki Yokogawa Druck Iwatzu plus many more ...

Did you know that the Fluke ater sales

service team can oer you much morethan just repairing and calibrating yourinstrument when it is needed? Acrossour whole Fluke European serviceorganization we have a vast range ocapabilities, which can be utilized viayour local service centre. Behind thescenes Fluke draws on the expertise oover 150 service sta that are ocusedon oering only the best and mostcomprehensive ater sales service.

What other value added services do

we oer? Gold Support or Fluke Networks Gold CarePlans or calibration products A ull range o maintenance contracts Extended warranty programs Instrument upgrades Option retrofts Asset management Calibration reminders

What services do we oer you? 5 day repairs on all current products 5 days or less on all calibrations (excl.

repairs) 3 days or all Gold CarePlan calibrations 1-2 days on all Networks Gold calibration

Pick up services where available

Let Fluke After Sales Servicehelp you further

Eindhoven Norwich CologneTelephone +31 (0)40 267 5300 +44 (0)1603 256620 +49 (0)69 2222 20210Teleax +31 (0)40 267 5321 +44 (0)1603 256688 +49 (0)69 2222 20211Email [email protected] [email protected] [email protected] Science Park 5108

Eindhoven5692 EC SonNetherlands

52 Hurricane WayNorwichNorolkNR6 6JB

United Kingdom

Heinrich-Pesch-Str. 9-1150739 KlnGermany

Contact Information

Fluke Brands Instrument TypesFluke Digital Multimeters

Hart Scientiic Electrical StandardsFluke Networks Biomedical Equipment

Fluke Biomedical Data Loggers

Raytek Thermal ImagersReliable Power Meters Thermometers

Robin PressureLEM Instruments Function Generators

BEHA OscilloscopesNorma Installation Testers

Wavetek/Datron PAT TestersMetron Clamp Meters

DHI Power AnalyzersComark EX meters

Plus many more

Fluke service centres handle a wide rangeo equipment.As part o Flukes continuing ocus on improvingour service to our customer we now oer acomprehensive range o repairs and calibrationson a vast range o equipment.Fluke manuactures equipments such as:

On-Line booking in systemWhy not use our On-Line booking in systemwhere you can book your unit in, get pricingand receive a RMA number or a smoothreturn.www.fuke.com/servicerma


10/140

Table 1

Figure 1. Understanding categories: location

Overvoltage installation categories. IEC 61010-1 applies to low-voltage (< 1000V) test equipment

Fluke: Where safety is built in

Overvoltage category In brie ExamplesCAT IV Three-phase at utility connection,any outdoor conductors

Reers to the origin o installation; i.e., where low-voltage connection is made to utility power. Electricity meters, primary overcurrent protection equipment. Outside and service entrance, service drop rom pole to building, run between meter and panel. Overhead line to d etached building, underground line to well pump.

CAT III Three-phase distribution, including single-phase commercial lighting

Equipment in fxed installations, such as switchgear and polyphase motors. Bus and eeder in industrial plants. Feeders and short branch circuits, distribution panel devices. Lighting systems in larger buildings. Appliance outlets with short connections to service entrance.

CAT II Single-phase receptableconnected loads

Appliance, portable tools, and other household and similar loads. Outlet and long branch circuits. Outlets at more than 10 meters (30 eet) rom CAT III source. Outlets at more than 20 meters (60 eet) rom CAT IV source.

CAT I Electronic Protected electronic equipment. Equipment connected to (source) circuits in which measures are taken to limit transient overvoltages

to an appropriately low level. Any high-voltage, low-energy source derived rom a high-winding resistance transormer, such as the

high-voltage section o a copier.

As distribution systems and loads

become more complex, the possibilitieso transient overvoltages increase.Motors, capacitors and power conversionequipment such as variable speed drivescan be prime generators o spikes.Lightning strikes on outdoor transmissionlines also cause extremely hazardoushigh-energy transients. I youre takingmeasurements on electrical systems,these transients are invisible andlargely unavoidable hazards. They occurregularly on low-voltage power circuits,and can reach peak values in the manythousands o volts. To protect you against

transients, saety must be built into thetest equipment.

Who Develops Saety Standards?

The IEC (International ElectrotechnicalCommission) develops international generalstandards or saety o electrical equipmentor measurement, control and laboratoryuse. IEC61010-1 is used as the basis or theollowing national standards: US ANSI/ISA-S82.01-94 Canada CAN C22.2 No.1010.1-92 Europe EN61010-1:2001

Overvoltage Installation CategoriesIEC61010-1 specifes categories oovervoltage based on the distance the pieceo equipment is rom the power source(see Fig. 1 and Table 1) and the naturaldamping o transient energy that occurs

in an electrical distribution system. Highercategories are closer to the power source andrequire more protection.Within each installation category there arevoltage classifcations. It is the combination oinstallation category and voltage classifcationwhich determines the maximum transientwithstand capability o the instrument.

IEC 61010 test procedures take into accountthree main criteria: steady-state voltage,peak impulse transient voltage and sourceimpedance. These three criteria together willtell you a multimeters true voltage withstandvalue.

Within a category, a higher working voltage(steadystate voltage) is associated with ahigher transient, as would be expected. Forexample, a CAT III 600 V meter is testedwith 6000 V transients while a CAT III 1000 Vmeter is tested with 8000 V transients.So ar, so good. What is not as obvious is thedierence between the 6000 V transient orCAT III 600 V and the 6000 V transient orCAT II 1000 V. They are not the same. This iswhere the source impedance comes in. OhmsLaw (Amps = Volts/Ohms) tells us that the 2 test source or CAT III has six times the current

o the 12 test source or CAT II. The CAT III

600 V meter clearly oers superior transientprotection compared to the CAT II 1000 Vmeter, even though its so-called voltagerating could be perceived as being lower. SeeTable 2.

Independent testing is the key to saetycomplianceHow can you tell i youre getting a genuineCAT III or CAT II meter? Unortunately itsnot always that easy. It is possible or amanuacturer to sel-certiy that its meteris CAT II or CAT III without any independentverifcation. The IEC (InternationalElectrotechnical Commission) develops andproposes standards, but it is not responsible

or enorcing the standards. Look or thesymbol and listing number o an independenttesting lab such as UL, CSA, VDE, TV or otherrecognized approval agency.These symbols can only be used i the productsuccessully completed testing to the agencysstandard, which is based on national and

international standards. UL 3111, or example,is based on EN61010-1. In an imperect world,this is the closest you can come to ensuringthat the meter you choose was actually testedor saety.


11/140

Select the right test tool: Choose a test tool rated to the highest

category and voltage or which it couldpossibly be used (most oten 600 or 1000volt CAT III and/or 600 volt CAT IV).

Look or the category and voltage markingnear the recessed input connectors o yourtest tool and a double insulated symbolon the back.

Veriy your test tool has been tested andcertifed by two or more independenttesting laboratories, such as UL in theUnited States and VDE or TV in Europe bylooking or the symbols o these agencieson (the back o) your test tool.

Make sure that the test tool is made oa high-quality, durable non-conductivematerial.

Check the manual to veriy that theohms, continuity and capacitance circuitsare protected to the same level as thevoltage test circuit, to reduce hazardswhen the test tool is used incorrectly inohms, continuity or capacitance mode (iapplicable).

Veriy that the test tool has internalprotection to prevent instrument damagewhen voltage is incorrectly applied toan amperage measurement unction (iapplicable).

Make sure that the amperage andvoltage o your test tools uses meetsspecifcations. Fuse voltage must be as highor higher than the test tools voltage rating.

Be sure to use test leads that have:- Shrouded connectors- Finger guards and a non-slip surace- Category ratings that equal or exceed

those o the test tool- Double insulation (look or the symbol)- A minimum o exposed metal on the

probe tips

Saety is everyones responsibility but

ultimately it is in your hands.No tool by itsel can guarantee your saetywhen working with electricity. Its thecombination o the right tools and saework practices that gives you maximumprotection. Here are a ew tips to help youin your work:

Make sure you always comply with (local)regulations.

Work on de-energized circuits wheneverpossible.Use proper lock-out/tag-out procedures. I theseprocedures are not in place or enorced, assume

that the circuit is live.

Use protective gear when working on livecircuits: Use insulated tools Wear saety glasses or a ace shield Wear insulated gloves, remove watches orjewelry

Stand on an insulated mat Wear ame resistant clothing, not ordinary

work clothes

Inspect and test your test tool: Check or a broken case, worn test leads or

a aded display. Make sure the batteries still deliver

sufcient power to get reliable readings.Many test tools have a low battery indicatoron the display.

Check the test leads resistance or internalbreaks while moving the leads around(good leads measure 0.1-0.3 Ohm).

Use the meters own test capability toensure that the uses are in place andworking right (see manual or details).

Apply the appropriate workingpractices when measuring on livecircuits:

Hook on the ground clip frst, then makecontact with the hot lead. Remove the hotlead frst, the ground lead last.

Use the three-point test method, especiallywhen checking to see i a circuit is dead.First test a known live circuit. Second,test the target circuit. Third, test the livecircuit again. This verifes that your testtool worked properly beore and ater themeasurement.

Hang or rest the test tool i possible.Try to avoid holding it in your hands, tominimize personal exposure to the eectso transients.

Use the old electricians trick o keepingone hand in your pocket. This lessens the

change o a closed circuit across your chestand through your heart.

Fluke: Where safety is built in

OvervoltageInstallation

Category

Working Voltage(DC or AC RMS

to ground)

Peak ImpulseTransient

(20 repetitions)

Test Source( = V/A)

CAT I 600 V 2500 V 30 Ohm sourceCAT I 1000 V 4000 V 30 Ohm sourceCAT II 600 V 4000 V 12 Ohm sourceCAT II 1000 V 6000 V 12 Ohm sourceCAT III 600 V 6000 V 2 Ohm sourceCAT III 1000 V 8000 V 2 Ohm sourceCAT IV 600 V 8000 V 2 Ohm source

Table 2

Use meters with these markings:1000 V CAT III or 600 V CAT IV

Transient test values for overvoltage installation categories.(50 V/150 V/300 V values not included)

Use protective equipment such as safety glasses andinsulated gloves


12/140

Fluke Solution

Fluke total solutions campaigns

Fluke has launched a total solutions campaign ocused on all our products and the benefts or you. Discover how Fluke tools canhelp you make or save money. You can fnd a wide range o useul background inormation, www.ukesolution.co.uk

Plant MaintenanceFocus on motors and drives, energy saving and process trouble shooting, where Flukes Test & Measurement tools can help youmake the dierence. Learn more about our latest developments in or example inspecting motors and drives.

ThermographyFocus on the user experience o our Thermal Imagers and experience the wide-ranging benefts o thermal imaging in everyday on-the-job situations. See what Fluke Thermography has to oer to make your work easier.

EnergyFocus on energy saving benefts in the industrial maintenance market. Fluke Test & Measurement tools help you to detect problemsand/or monitoring situations prevention- beore they become critical. Learn how we can help you make or save money in your

plant or industry.

www.lukesolution.co.ukVisit the full portal to get all your troubleshooting solutions from one source. Every Fluke tool is built around one ideaYou!


13/140

Saety, quality and perormance: three words that sum up the benefts oour extensive range o digital multimeters. Designed to help you do yourjob aster, more efciently and with greater accuracy, there is a model orevery budget and application. Choose rom handheld troubleshooters toultra smart instruments packed with eatures, including the ability to logand graph data, as well as high-precision bench units.

Digital Multimeters


14/140


15/140

Included AccessoriesTL175 test leads, AC172 alligator clips, probeholder, 6 AA batteries (installed), user manual,Calibration Certifcate Sheet.

Ordering InformationFluke 287 True-RMS Electronic logging

multimeter with TrendCaptureFluke 289 True-RMS Industrial logging

multimeter with TrendCaptureFluke 289/FVF Industrial logging multimeter

and Sotware Combo Kit(see page 5)

Fluke 287/FVF FlukeView Forms Combo Kit(see page 5)

FVF-SC2 FlukeView Forms sotwareincluding IR/USB cable

287 289

True-RMS measurements AC, AC+DC AC, AC+DC

Bandwidth (voltage/current) 100 kHz / 100 kHz 100 kHz / 100 kHz

Digital display counts (deault/selectable) 50.000 / 50.000 50.000 / 50.000

Logging unction with TrendCapture O O

Records events and trends O O

Internal memory Up to 180 h Up to 180 h

Saves measurements O O

Optical USB PC communications interace O O

Low input impedance unction (LoZ) O

Motor winding and low ohm measurement range 50

Low pass ilter O

Field upgradeable/expandable meter O O

Navigation keys O O

F1-F4 sot keys/user unction menus O O

I-ino button/on board help screens O O

Multilingual interace O O

Saves preerred measurement setups O OCurrent measurement: 20 A (30 seconds momentary; 10 A continuous) O O

Peak capture (records transients as ast as 250 s) O O

Continuity measurement O O

Min/Max/Average with Time Stamp (records signal luctuations) O O

IP Rating 54 O O

Functions Maximum Max. resolution 287 and 289**

Voltage DC 1000 V 1 V (0.025% + 5)

Voltage AC 1000 V 1 V (0.4% + 40)

Current DC 10 A 0.01 A (0.15% +2)

Current AC 10 A 0.01 A (0.7% + 5)

Temperature -200 C to 1350 C 0.1 C (1.0% + 1 C)

Resistance 500 M 0.01 (0.05% + 2)

Conductance 50 nS 0.01 nS (1.0% + 10)

Capacitance 100 mF 0.001 nF (1.0% + 5)

Frequency 1 MHz 0.01 Hz (0.005% + 1)

280 Series Digital Multimeters

True RMS

Precise performance View logged data graphicallyon screen

Accuracies are best accuracies or each unction.** 287 and 289 accuracy and resolution are stated or 50.000 counts

Advanced diagnostic and loggingfunctionality for maximizing productivity

Replacing the popular 180 Series, theFluke 289 and Fluke 287 represent thenext generation o high-perormanceindustrial logging multimeters,including higher accuracy and greatertroubleshooting convenience than everbeore. With the ability to log data andreview it graphically on the large display,you can solve problems aster and helpminimize downtime, while working atseveral locations.

Large 50,000 count 320 x 240 (1/4 VGA)dot matrix display

Logging unction with TrendCapture oreasy review o logged data

Multiple readings per display providemore inormation at a glance

I-ino button or convenient on-boardhelp

PC interace or easy data transer

In addition, the Fluke 289 provides: Lo Pass flter or motor drive

measurements LoZ Low impedance unction prevents

alse ghost voltage readings 50 range or motor winding and low

ohm measurements

Features

Specifications

(Check the Fluke web for detailed specifications)

Recommended Accessories

TLK289See page 123

TL910See page 121

TLK287See page 121

TPAKSee page 132

C280See page 130

Fluke 287

Battery lie: 50 hours minimum,180 hours in logging mode

Size (HxWxD): 222 mm x 102 mm x 60 mm

Weight: 0,871 kgLietime warranty

Fluke 289


16/140

233

Removable magnetic display O

True-RMS measurement O

Digital display counts 6000

Display backlightO

Built in thermometer O

Resistance, continuity and diode test O

Min/Max and average recording O

Auto power o maximizes battery lie O

Radio transmitter automatically turns o whenthe display is connected to the meter

O

Use as conventional multimeter when the display is connected O

Saety rating CAT IV 600 V / CAT III 1000 V

Auto and manual ranging O

Display Hold and AutoHOLD O

Unsae voltage alert warns or voltages above 30V O

2 Low batteries indication O

Ergonomic case with integrated holster O

Selectable sleep mode preserves battery lie O

233 Remote Display Multimeter

Included AccessoriesTest leads with 4mm lantern tips, AC 172alligator clips, 80BK-A temperature probe,CD-ROM, AA batteries and user manual.

Ordering InformationFluke 233 Remote Display Multimeter

The Fluke 233 remote display digital

multimeter allows you to be in twoplaces at once. The removable displaysolves the problems o holding boththe meter and the test leads to make ameasurement, making measurementsin hard-to-reach places, and makingmeasurements in machines or panelsthat are physically separated rom a limit

switch or an isolator switch. Wireless

technology allows the display to becarried up to 10 meters away rom thepoint o measurement. The Fluke 233is also designed to work in areas wherethe operator cant be close to the activemeasurement point, like clean rooms orhazardous areas.


80AK-ASee page 128

80PK-9See page 128

i410See page 127

TpakSee page 132

C35See page 130

Battery Lie: AA alkaline (3 or main body,2 or display), 400 hrs typical

Size (HxWxD): 193 x 93 x 53 mm

On all inputs

Features

Specifications

FunctionsFluke 233

Maximum Max. Resolution Accuracy

Voltage DC 1000 V 0.1 mV (0.25% + 2)Voltage AC 1000 V 0.1 mV (1.0% + 3)Current DC 10 A 1 mA (1.0% + 3)Current AC 10 A 1 mA (1.5% + 3)Resistance 40 M 0.1 (0,9% + 1)Capacitance 9999 F 1 nF (1,9% + 2)Frequency 50.00 kHz 0.01 Hz (0,1% + 2)Temperature -40 C to +400 C 0,1 C (1% + 10)Wireless requency: 2.4 GHz ISM Band 10 meter range

Weight: 0.6 kgThree year warranty

Ultimate flexibility with removable display

Accuracies are best accuracies or each unction

Fluke 233

True RMS


17/140

True RMS

80 Series VDigital Multimeters

Included Accessories

TL175 test leads, AC172 alligator clips, yellowholster (H80M excl. TPAK), 80BK temperatureprobe (87V only), 9 V battery (installed),CD-ROM (users manual and technical notes)and operators guide.

Ordering InformationFluke 83V MultimeterFluke 87V True RMS MultimeterFluke 87V Ex Intrinsically sae

True RMS multimeterFluke 87V/E2 Industrial Electrician Combo

KitSee page 4

The Fluke 80 Series V have improved

measurement unctions, troubleshootingeatures, resolution and accuracy to solvemore problems on motor drives, in plantautomation, power distribution, andelectro-mechanical equipment.

The Fluke 87V has a unique unction

or accurate voltage and requencymeasurements on adjustable speedmotor drives and other electrically noisyequipment. A built-in thermometerconveniently allows you to taketemperature readings without having tocarry a separate instrument. For 87V Exsee also page 118 and 119.

Specifications


C25See page 130

TL238See page 122

i410/i1010See page 127

TPAKSee page 132

L215See page 123

Features

Accuracies are best accuracies or each unction.* 87V accuracy is stated or 6000 counts and resolution or 20000 counts** 20 A up to 30 seconds

On all inputs

not 87V Ex

Fluke 87V

Fluke 83V

Fluke 87V Ex

83V/87V

Battery Lie: Over 400 hours typical (alkaline).Size (HxWxD):200 mm x 95 mm x 48 mm

Weight: 0.6 kg83V/87V: Lietime Warranty87V Ex: One Year Warranty

83V 87V / 87V Ex

True-RMS voltage and current or accuratemeasurements on non linear signals

O

Bandwidth (voltage/current) 5 kHz 20 kHz

Digital display counts (deault/selectable) 6000 20000 / 6000

Selectable ilter or accurate voltage and requencymeasurements on motor drives

O

Large display with analog bargraph and 2 level brightwhite backlight

O O

Auto and manual ranging or maximum lexibility O O

Built-in thermometer lets you carry one less tool O

Peak capture to record transients as ast as 250 s O

Relative mode to remove test lead resistance rom lowohms measurements

O O

Min-Max-Average recording with Min/Max Alert tocapture variations automatically

O O

AutoHOLD to capture stable readings avoiding noisysignals

O O

Audible continuity, diode test and duty cycle O O

Input Alert O O

Classic design with new removable holster with built

in test lead and probe storage

O O

Improved selectable sleep mode or long battery lie O O

Easy battery exchange without opening the completecase

O O

ATEX saety rating II 2 G Eex ia IIC T4 87V Ex

Functions Maximum Range 83V 87V/87V Ex*M ax. res olu ti on Ac cu ra cy

Max.resolution

Accuracy

Voltage DC 1000 V 0.1 mV (0.1%+1) 10 V (0.05%+1)Voltage AC 1000 V 0.1 mV (0.5%+2) 10 V (0.7%+2)Current DC 10 A ** 0.1 A (0.4%+2) 0.01 A (0.2%+2)Current AC 10 A ** 0.1 A (1.2%+2) 0.01 A (1.0%+2)Resistance 50 M 0.1 (0.4%+1) 0.01 (0.2%+1)

Conductance 60 nS 0.01 nS (1.0%+10) 0.001 nS (1.0%+10)Capacitance 9999 F 0.01 nF (1.0%+2) 0.01 nF (1.0%+2)Frequency > 200 kHz 0.01 Hz (0.005%+1) 0.01 Hz (0.005%+1)

Temperature -200 to 1090 C - 0.1 C 1.0%80BK temperature probe -40 to 260 C - - 2.2 C or 2%

Performance and accuracy formaximum industrial productivity


(Not for hazardous zones)


18/140



Test leads with 4 mm lantern tips, installed9V battery and users manual. The 179 alsoincludes the 80BK temperature probe.

Ordering InformationFluke 175 True RMS MultimeterFluke 177 True RMS MultimeterFluke 179 True RMS MultimeterFluke 179/EDA2 Kit Electronics Combo KitFluke 179/MAG2 Kit Industrial Combo Kit

See page 4

These meters have the eatures neededto fnd most electrical, electro-mechanical and heating and ventilationproblems.They are simple to use and havesignifcant improvements over Flukesoriginal 70 Series like True-RMS, moremeasurement unctions, conormance tothe latest saety standards, and a muchlarger display thats easier to view.



i400See page 126

C90See page 130

TLK-220See page 122

SV225See page 133

i410-i1010See page 127

Features


Battery Lie: Alkaline, 200 hrs typicalSize (HxWxD): 190 mm x 85 mm x 45 mm

Fluke 175

Fluke 177

On all inputs

Fluke 179

True RMS

Specifications

175 177 179

True-RMS measurements AC AC AC

Digital display counts, updates 4 times per second 6000 6000 6000

Display backlight O O

Analog bargraph / 33 segments, updates 40 times persecond

O O O

Auto and Manual ranging O O O

Display Hold and AutoHOLD O O O

Min-Max-Average recording mode with Min/Max Alert O O O

Temperature readings (bead thermocouple probeincluded)

O

Smoothing mode allows iltering o rapidly changinginputs

O O O

Audible continuity and diode test O O O

Test lead alert O O O

Unsae voltage alert warns or voltages above 30V O O O

Low battery indication O O O

Ergonomic case with integrated holster O O O

Easy battery and use exchange without opening thecomplete case

O O O

Selectable sleep mode preserves battery lie O O O

Weight: 0.42 kgLietime Warranty

Functions Maximum Max. resolution 175 177 179

Voltage DC 1000 V 0.1 mV (0.15%+2) (0.09%+2) (0.09%+2)Voltage AC 1000 V 0.1 mV (1.0%+3) (1.0%+3) (1.0%+3)Current DC 10 A 0.01 mA (1.0%+3) (1.0%+3) (1.0%+3)Current AC 10 A 0.01 mA (1.5%+3) (1.5%+3) (1.5%+3)

Resistance 50 M 0.1 (0.9%+1) (0.9%+1) (0.9%+1)Capacitance 10000 F 1 nF (1.2%+2) (1.2%+2) (1.2%+2)Frequency 100 kHz 0.01 Hz (0.1%+1) (0.1%+1) (0.1%+1)

Temperature -40 C/+400 C 0.1 C (1.0%+10)

Versatile meters for field service orbench repair


19/140


The Fluke 110 Series has fve true-rms

DMMs, each or specifc users. The compactinstruments oer convenient one-handedoperation and a backlit display with large, easy-to-read digits.

Fluke 117 Electricians Multimeter withNon-Contact VoltageThe 117 is or electricians working incommercial and non-commercial premises(like hospitals and schools). It includes extraslike non-contact voltage detection or asterand saer operation.

Fluke 116 Multimeter with Temperatureand MicroampsThe 116 is or heating, ventilation and airconditioning (HVAC) engineers. It includestemperature measurement and microamp

current ranges to quickly troubleshoot HVACproblems.

Fluke 115 Field Service Testing

MultimeterAn everyday multimeter or technicians, the115 is or electrical and electronic testing infeld service, industrial, and applications wheremore than the basic unctions simpliy work.

Fluke 114 Electrical MultimeterThe 114 is or electrical troubleshooting andstraightorward go/no-go in residential/commercial testing. It has all the basicunctions plus a special eature to prevent alsereadings caused by ghost voltage.

Fluke 113 MultimeterThe 113 is or basic electrical tests andrepairing most electrical problems. Featuresinclude Flukes VCHEK, added measurementunctions, backlight and conormance to the

latest saety standards.


C50See page 130


TL223-1See page 122

MC6See page 133

TPAKSee page 132

Features


Battery type: 9 volt Alkaline, 400 hours t ypicalSize (HxWxD): 167 mm x 84mm x 46 mm

Specifications

Weight: 0.55 kg (including batteries)Three Year Warranty

Compact design for ergonomicone-handed operation

113 114 115 116 117

True RMS readings AC AC AC AC AC

Counts 6000 6000 6000 6000 6000

Backlight O O O O O

Analog bargraph O O O O O

AutoVolt: Automatic AC/DC voltage selection O O O

VoltAlert, Non-contact voltage detection O

Built-in thermometer or HVAC applications O

LoZ: low input impedance to prevent ghost voltage O O O

VCHEK LoZ low impedance measurement unction tosimultaneously test or voltage or continuity O

Min/Max/Average to record signal luctuations O O O O O

Resistance, continuity O O O O O

Frequency, Capacitance, Diode test -/ O/O O O O

Microamps to test lame sensors O

Display hold O O O O O

Auto/manual ranging O O O O O

Low battery indication O O O O O

Compact case with removable holster O O O O O

Functions Maximum Max. resolution 113 114 115 116 117

Voltage DC 600V 1mV ( 0.5 %+2 ) ( 0.5 %+2 ) ( 0. 5% +2 ) ( 0. 5%+2 ) ( 0. 5%+2 )

Voltage AC 600V 1mV ( 1.0 %+3 ) ( 1. 0% +3 ) ( 1. 0%+3 ) ( 1. 0%+3 )

Current DC 10.00A 1mA (1.0%+3) (1.0%+3)

Current AC 10.00A 0.01A (1.5%+3) (1.5%+3)

Resistance 40M (113: 60K) 0.1 ( 0.9 %+2 ) ( 0.9 %+1 ) ( 0. 9% +1 ) ( 0. 9%+1 ) ( 0. 9%+1 )

Capacitance 10000F 1nF (1.9%+2) (1.9%+2) (1.9%+2) (1.9%+2)

Frequency 50kHz 0.01Hz (0.1%+2) (0.1%+2) (0.1%+2)

Temperature -40C/+400C 0.1C (1.0%+10)

VCHEK 600.0V AC/DC 0.1V (2.0%+3)

Fluke 117

Fluke 115

Fluke 116

Fluke 114

True RMS

On all inputs

Fluke 113

Included AccessoriesTest leads with 4 mm lantern tips, holster,installed 9V battery and users manual

Ordering InformationFluke 113 True RMS MultimeterFluke 114 True RMS MultimeterFluke 115 True RMS MultimeterFluke 116 True RMS MultimeterFluke 117 True RMS MultimeterFluke 117/322 Kit Electricians Combo Kit

(see page 4)


20/140

27 II 28 II

IP 67 waterproo & dustproo protection O O

Withstands 3 meter drop (with holster) O O

True-RMS measurements O

Digital display counts 6000 20000/6000

Bright, two-level backlight O O

Backlit keypad buttons O O

Reversible, rubber holster O O

Built-in thermometer O

Resistance, continuity and diode test O O

Min/Max and average recording O O

Improved sleep mode or long battery lie O O

Relative mode to remove test lead resistancerom low ohms measurements

O O

Auto and manual ranging O O

Saety rating CAT III 1000 VCAT IV 600 V

CAT III 1000 VCAT IV 600 V

27II / 28II Rugged IP67 IndustrialMultimeters

Included AccessoriesTL175 Test leads, AC172 alligator clips,80BK-A temperature probe (28 II), holster,manual, CD-ROM, three AA batteries(installed)

Ordering InformationFluke 27 II IP 67 Industrial MultimeterFluke 28 II IP 67 True-RMS Industrial Multimeter

The Fluke 27 II and 28 II digitalmultimeters defne a new standard oroperating in harsh conditions with theeatures and accuracy to troubleshootmost electrical problems. Both metershave IP 67 (waterproo and dustproo)rating, MSHA approvals, extendedoperating temperature range o -15 C to+ 55C and 95% humidity, and a 3-meterdrop. They withstand hazardous 8.000volt spikes caused by load switching and

aults on industrial circuits and complieswith second edition IEC and ANSIelectrical saety standards.Furthermore, the 28 II has a uniqueunction or accurate voltage andrequency measurements on adjustablespeed motor drives and other electricallynoisy equipment.The new Fluke 20 series multimetersare built to work in the toughestenvironments.


Battery Lie: 3x AA alkaline, 800 hrs ty picalSize (HxWxD): 198 x 100 x 63.5 mm

Features

Specifications

Functions MaximumMax.

Resolution27 II 28 II

Voltage DC 1000 V 0.1 mV (0.1% + 1) (0.05% + 1)Voltage AC 1000 V 0.1 mV (0.5% + 3) (0.7% + 4)Current DC 10 A 0.1 A (0.2% + 4) (0.2% + 4)Current AC 10A 0.1 A (1.5% + 2) (1.0% + 2)Temperature -200C to

+1090C0.1C (1% + 10)

Resistance 50M 0.1 (0.2% + 1)Low pass ilter (Measurement on VSDs) yesCapacitance 9999F 0.01nF (1% + 2)Frequency 200 kHz 0.01 Hz 0.005% + 1Peak transient capture 250 S


Designed to survive water, dust and roughhandling and yet troubleshoot most electricalproblems


On all inputs

Fluke 27 II

Fluke 28 II

True RMS

PV 350See page 125

i200See page 126

i410See page 127

80K-6See page 133


21/140

77IV Digital Multimeter

The 77-IV digital multimeter has theeatures needed to repair most electricaland electronic problems. This meteris simple to use and has signifcantimprovements over Flukes original70 Series with more measurementunctions, conormance to the latestsaety standards, and a much largerdisplay thats easier to view.

Features

Accuracies are best accuracies or each unction.

Battery Lie: 400 hours typicalSize (HxWxD): 185 mm x 90 mm x 43 mm

Included AccessoriesTest leads with 4mm lantern tips, operatorsmanual, 9V battery (installed)

Ordering InformationFluke 77IV Multimeter

On all inputs

Function Maximum Max. resolution Accurancy

Voltage DC 1000 V 1 mV (0.3%+1)Voltage AC 1000 V 1 mV (2.0%+2)Current DC 10 A 0.01 mA (1.5%+2)Current AC 10 A 0.01 mA (2.5%+2)Resistance 50 M 0.1 (0.5%+1)

Capacitance 9999 F 1 nF (1.2%+2)Frequency 99.99 kHz 0.01 Hz (0.1%+1)

Specifications

77 IV

Digital display counts 6000

Large display with backlight O

Min-Max-Average recording mode with Min/Max AlertO

High contrast digital display with large digits O

Analog bargraph/segments 31

Auto and Manual ranging O

Automatic Touch Hold O

Audible continuity / diode test O

Ergonomic case with integrated holster O

Sleep Mode preserves battery lie O

EN 61010-1 saety rating CAT IV 600 V / CAT III 1000 V


Versatile multimeter for field serviceor bench repair


i400See page 126

C35See page 130

TpakSee page 132

TL225See page 133

TLK-225See page 123

Fluke 77 IV


22/140

88V/A

Continuity or detecting open and shorts O

Frequency or pulsed-DC and AC tests O

Duty cycle to veriy operation o eedback carburetors O

Diode test or alternator testing O

Built-in thermometer; thermocouple probe included O

Min/Max/Average recording with Min/Max Alert O

Peak capture to record transients as ast as 250 s O

Relative mode to remove test lead resistance rom low ohms measurements O

Millisecond pulse width measurements or uel injectors O

AutoHOLD to capture stable readings O

Large display with bright, two-level backlight O

Magnet hanger to attach meter to the vehicle O

RPM80 Inductive Pickup or both conventional and distributorless (DIS) ignitions O

Hard Meter Case O

Saety rating CAT III 1000 V,CAT IV 600 V

88V Automotive Meter

Included AccessoriesH80M Holster with TPAK Meter HangingSolution, TL224 SureGrip Silicone Test LeadSet, TP74 Test Probe Set, AC285 SureGripLarge Jaw Alligator Clip Set, 80BK IntegratedTemperature Probe, RPM80 Inductive Pick-upProbe, C800 Hard Case, Users Manual + QuickReerence Guide

Ordering InformationFluke 88V/A Automotive Meter Combo Kit

Perhaps the most important tool youlluse in troubleshooting auto electricalsystems is the multimeter. Basicmultimeters measure voltage, currentand resistance, while automotivemultimeters like the Fluke 88V haveeatures that can check requency, dutycycle, make diode tests, and measuretemperature, pressure and vacuum.


TL82See page 125

TLK-282-1See page 125

90i-610sSee page 125

80PK-27 (requires 80AK)See page 128

PV350See page 125

Battery Lie: 88V Over 400 hours typical(alkaline)Size (HxWxD): 88V 186 mm x 86 mm x 32 mm

Fluke 88V/A

On al inputs

Features

Specifications

Fluke 88V

Range Resolution Accuracy

Voltage DC 1000V 0.1mV 0.1%Voltage AC 1000V (5 kHz) 0.1mV 0.5%Current DC 10A 0.1A 0.4%Current AC 10A 0.1A 1.2%Resistance 50M 0.1 0.4%Capacitance 10mF 0.01nF 1%

Frequency 200kHz 0.01Hz 0.01%Temperature 1090C 0.1C 1%

Weight: 88V 0.36 kgLietime Warranty

The right meter for auto-electric diagnosis


23/140

8845A/8846A6.5 Digit Precision Multimeters

Included AccessoriesLCI Line Power Cord, Test Lead Set,Spare Line Power use, Programmers Manual/User Manual on CD-ROM, 884X-USB USB toRS232 Cable Adapter, FVF-BASIC FlukeViewForms Sotware Basic Version.

Ordering InformationFluke 8845A 6.5 Digit Precision MultimeterFluke 8845A/SU 6.5 Digit Precision

Multimeter (sotware + cable)Fluke 8846A 6.5 Digit Precision MultimeterFluke 8846A/SU 6.5 Digit Precision

Multimeter (sotware + cable)Calibration & Service agreements

The Fluke 8845A and 8846A, 6.5 digit

precision multimeters have the precisionand versatility to handle your mostdemanding measurements on the benchor in a system.

Dual Display oers versatile graphicalcapabilities: The 8845A and 8846Aeatures a unique graphical display thatcan reveal signal quality issues like drit,intermittent and stability by viewingthe measurement data as a real timeTrendPlot, Histogram or Statisticsusing the unique analyze mode.Wide Measurement Ranges: Resistanceor current has been extended to coverthe widest range possible.

Perorm 4-wire measurements easily

with two leads: Patented split terminaljacks or 2x4 Ohms unction allows youto perorm precise 4-wire measurementswith only two leads instead o our.Optional Kelvin leads accessories areavailable to enable you to establish a 4-wire connection even in tight spaces.Systems Capabilities: Both instrumentsinclude an RS-232, IEEE-488 and Ethernetinterace as standard, with popularDMM emulation modes makes systemsintegration a simple task.Sotware: Transer data points rom yourmeter to your PC with the ree copy oFlukeView Forms Basic. To customizeyour orms upgrade with FVF-UG.

* Accuracy =+/- (% o reading)

884X-caseHard case

TL2X4W-TWZ2x4 Wire Ohms Tweezer

Test Leads

TL2X4W-PT II2x4 Wire Ohms Testlead 2mm Probe Tip

884X-512MUSB Memory 512M

FVF-UGFlukeView FormsSotware Upgrade

Size (HxWxD): 88 mm x 215 mm x 293 mmWeight: 3.6 kgThree Year Warranty

Features

Specifications

Fluke 8846A



Fluke 8845A

8845A 8846AFunction* Range Resol ution A ccuracy * (%) Range Resol ut ion A ccuracy * (%)

Voltage DC 1000 V 100 nV 0.0035 1000 V 100 nV 0.0024Voltage AC (Freq 300 Hz) 750 V 100 nV 0.06 1000 V 100 nV 0.06Resistance (2x4 Wire) 100 M 100 0.01 1 G 10 0.01Current DC 10 A 100 pA 0.05 10 A 100 pA 0.05Current AC (Freq. 3Hz-10kHz) 10 A 10 A 0.10 10 A 100 pA 0.10Freq/Period 300 kHz 1 Hz 0.01 1 MHz 1 Hz 0.01Capacitance - - - 1 nF to 100 mF 1 pF 1Temperature RTD - - - -200 to +600 0.001 0.06

True RMS

8845A 8846ADisplay Dual VFD Dot MatrixResolution 6.5 DigitsMeasurement Rate (Rdgs/s) 1000Continuity / Diode Test YesAnalytical Functions Statistics, Histogram, TrendPlot, Limit CompareMath Functions NULL, Min/Max, dB/dBmUSB Device Port USB Memory Drive portReal Time Clock Yes

Interaces RS232, IEEE-488.2, EthernetProgramming Languages/Emulation Modes

SCPI (IEEE-488.2), Agilent 34401A, Fluke 45

Saety Designed to comply with IEC 61010-12000-1, ANSI / ISA-S82.01-1994, CAN /CSA-C22.2 No.1010.1-92 1000V CATI / 600V CATII

Precision and versatility for bench orsystems applications

Handle even the most demanding measurements withhigh accuracy and 6.5 digit resolution

View results in Histogram mode to reveal stability ornoise problems in analog circuits

Use the built-in TrendPlot paperless chart recorder tographically identify the extent of drift and intermittentevents in analog circuits


24/140

8808A 5.5 Digit Multimeter

Included AccessoriesLCI Line Power Cord, Test Lead Set, Spare LinePower use, 884X-USB USB to RS232 CableAdapter, FlukeView Forms Sotware BasicVersion, Programmers Manual/User Manualon CD-ROM.

Ordering InformationFluke 8808A 5.5 digit multimeterFluke 8808A/SU 5.5 digit multimeter,

(sotware & cable)Fluke 8808A/TL 5.5 digit multimeter,

2X4W Test Lead Kit

Manuacturing test, R&D, developmentand service applications demandperormance and exibility rom abench meter. The Fluke 8808A delivers awide variety o measurement unctions,including volts, ohms, and amps, plusrequency - all at superior accuracy andresolution with a basic V dc accuracy o0.015 %.

Measure sensitive leakage current: TheFluke 8808A includes two low impedancelow current ranges or measuringsensitive leakage currents (i-Leakage).

Perorm routine manuacturingunctional tests with consistency:

Use setup keys (S1 S6) or ast access torepetitive measurements. Operators nolonger need to press multiple buttons tomake routine measurements.

Eliminate production mistakes: The8808A has a limit compare mode withbuilt in display enunciators that clearlyshow whether a test is within or out olimits.

Perorm 4-wire measurements withonly two leads: Patented split terminaljacks or 2x4 Ohms unction allow youto perorm precise 4-wire low ohmsmeasurements with only two leadsinstead o our. Optional test leadaccessories are available to enable youto establish a 4-wire connection even intight spaces or on surace mount devices.

* Accuracy = +/- (% o reading)

Size (HxWxD): 88 mm x 217 mm x 297 mmWeight: 2.1 kgThree year Warranty

Features

Specifications

The Fluke 8808A includes two low impedance lowcurrent ranges for measuring sensitive leakagecurrents

Dual Display



Fluke 8808A

Functions Range Resolution Accuracy*

Voltage DC 200 mV to 1000 V 1 V 0.015Voltage AC(Freq. 10 Hz to 100 kHz)

200 mV to 750 V 1 V 0.2

Resistance (2x4 Wire) 200 to 100 M 1 m 0.02

Current DC 200 A to 10 A 1 nA 0.02

Current AC(Freq. 20 Hz to 2 kHz) 20 mA to 10A 0.1 A 0.3

Freq. Period 20 Hz to 1 MHz(Freq. only)

0.1 mHz 0.01True RMS

8808A

Display VFD multi segmentResolution 5.5 digitsMeasurements V ac, V dc, I dc, I ac, , Cont, DiodeAdvanced Measurements 2X4 Wire Ohms, Freq, i-LeakageContinuity / Diode Test YesAnalytical Functions Limit CompareMath Functions dBm, dB, Min, MaxInteraces RS-232, USB via optional adapterProgramming Languages/Modes

Simpliied ASCI, Fluke 45Saety Rating CAT I 1000 V, CAT II 600 V

FVF-UG/SC4/SC5FlukeView Forms

Sotware

884X-short4-Wire Short

TL2X4W-PT II2x4 Wire Ohms Testlead 2mm Probe Tip

884X-caseHard case

TL2X4W-TWZ2x4 Wire Ohms Tweezer

Test Leads

Versatile multimeter for manufacturing,development and service applications

Use setup keys (S1-S6) for fast access to repetitivemeasurements. Setups can include limit compare modewith pass/fail indicators


25/140

The ergonomic clamp meters eature wide opening jaws or sae, astnon-contact current measurement. The Fluke leakage clamp meter isideal or non-invasive checks o insulation resistance.The range o electrical testers includes two-pole testers or taking quick

measurements in tight spaces, phase rotation indicators to take theguess work out o checking phase/motor rotation, a multipurpose cablelocator and handy voltage alerts.The new Fluke iFlex exible current probes expand the measurementrange o select Fluke meters to 2500 A ac and allow technicians to reachcrowded spaces.

Clamp Meters andElectrical Testers


26/140


27/140

381 Remote Display True-rmsAC/DC Clamp Meter with iFlex

365 Detachable JawTrue-rms AC/DC Clamp Meter

Included Accessories18-inch iFlex Flexible Current Probe (Fluke381), test leads, sot carrying case, instructioncard, saety inormation sheet, two AAalkaline batteries.

Ordering InformationFluke 381 Remote Display True-rms

AC/DC Clamp Meter with iFlexFluke 365 Detachable Jaw True-rms

AC/DC Clamp MeterTL175

See page 124TL223-1

See page 122


The Fluke 381 Clamp Meter combines

iFlex exibility with remote readingcapability or the ultimate in innovationand saety. Remote display reads measurements

up to 30 eet away iFlex exible current probe

included, 18-inch circumerence 2500 A ac current measurement

with iFlex 1000 A ac and dc current measurement

with fxed jaw 1000 V ac and dc voltage

measurement Frequency measurement to 500 Hz 60 k resistance measurement Min/Max/Avg and inrush recording CAT IV 600 V, CAT III 1000 V Three-year warranty

See specifcations chart on page 24.

The Fluke 365 Clamp Meter oers asmall, detachable jawwith our eet ocoilthat makes it easy to take and readmeasurements in tight or hard-to-reachplaces. 200 A ac and dc current measurement 600 V ac and dc voltage measurement 6000 resistance measurement Built-in ashlight Large, easy-to-read backlight display

Three-year warrantySee specifcations chart on page 24.

All the bells and whistles

Where rugged meets reliable

New

New

True RMS

True RMS


28/140

370 Series Clamp Meters

Included Accessories18-inch iFlex exible current Probe (Fluke376), test leads, sot carrying case, instructioncard, saety inormation sheet,two AA alkaline batteries.

Ordering InformationFluke 376 True-rms AC/DC Clamp Meter

with iFlex

Fluke 375 True-rms AC/DC Clamp MeterFluke 374 True-rms AC/DC Clamp Meter

Fluke 373 True-rms AC Clamp Meteri2500-10 iFlex Flexible Current Probe 25 cm (10 in)i2500-18 iFlexFlexible Current Probe 45 cm (18 in)

Our new amily o true-rms clamp meters

provides a range o state o-the-art eatures to meet even the mostdemanding job requirements.All our o the new clamp meters haveimproved base eatures such as a large,backlit display, true-rms standard, CAT IV

saety rating and a durably constructed

body. Additionally, the 376, 375 and 374are compatible with the iFlex exiblecurrent probe (included with the 376,sold separately or the 375 and 374), andprovide increased measurement readingsto 1000 A and 1000 V ac and dc.


True RMS

Fluke 374 Fluke 373Fluke 375

Fluke 376(with i2500)

Fluke i2500

Be ready for anything

iFlex Flexible Current Probe

Specifications

New

TL175See page 124

TL223-1See page 122

AC285See page 124

The new Fluke iFlex exible current probes expand the measurement range o selectFluke meters to 2500 A ac and allow technicians to reach crowded spaces.

Expands the measurement range to 2500 A ac while providing increased displayexibility, ability to measure awkward sized conductors and improved wire access

Compatible to Fluke 374, 375, 376 and 381 CAT IV 600 V, CAT III 1000 V 7.5 mm coil diameter allows measurement in tight spaces Ergonomic design allows easy operation with one hand 1.8 m (6 t) cable Three-year warranty

373 374 375 376

True-rms O O O O

AC current O O O O

AC voltage O O O O

Resistance O O O O

Continuity O O O O

DC volts O O O O

DC currentO O O

Frequency O O

Low pass ilter O O

Inrush current mode O O O

18-inch iFlex Flexible Current Probe Optional Optional Included

10-inch iFlex Flexible Current Probe Optional Optional Optional

Functions Range 373 374 375 376

Current AC 0 to 600.0 A 2% 5 counts 2% 5 counts 2% 5 counts

0 to 999.9 A 2% 5 counts

Current DC 0 to 600.0 A 2% 5 counts 2% 5 counts

0 to 999.9 A 2% 5 counts

Voltage AC 0 to 600.0 V 1% 5 counts 1.5% 5 counts 1.5% 5 counts 1 .5% 5 counts

Voltage DC 0 to 600.0 V 1% 5 counts 1% 5 counts 1% 5 counts

0 to 1000 V 1% 5 counts

Resistance range 0 to 6000 0 to 6000 0 to 6000 0 to 60 k

Jaw opening 32 mm 34 mm 34 mm 34 mm

Max. wire size 750 MCM 750 MCM 750 MCM 750 MCM

Frequency measurement range 500 Hz 500 Hz

Features


29/140

320 Series Clamp Meters

902 True-rms HVAC Clamp Meter

Included AccessoriesTest leads, temperature probe (Fluke 902), sotcarrying case, instruction card, saetyinormation sheet, two AA alkaline batteries.


Fluke 321 Clamp MeterFluke 322 Clamp MeterFluke 902 True-rms HVAC Clamp Meter

TL175See page 124

LVD2See page 32

TL223-1See page 122

H3See page 131


The Fluke 321 and 322 are designedto veriy the presence o load current,ac voltage and continuity o circuits,switches, uses and contacts. These smalland rugged clamp meters are ideallysuited or current measurements up to400 A in tight cable environments. Precised measurements with 1.8 % basic

accuracy

Resolution up to 0.01 A and 0.1 V Measures ac current 40.00 A/400.0 A Measures ac and dc volts to 600 V

Resistance measurement to 400 Continuity or quick checking o shorts

See specifcations chart on page 24or details per model.

HVAC (heating, ventilation, airconditioning) technicians require a servicetool that can consistently keep up withtheir demands. The Fluke 902 expands theexisting line o quality Fluke clamp metersby delivering the eatures necessaryto diagnose and repair HVAC systems.Combined with true-rms technologyand a CAT III 600 V rating, the Fluke 902helps technicians do their jobs saely andaccurately. Designed or HVAC applications with

capacitance, dc current (A), andtemperature measurements

Small body and jaws ft perectly in yourhand and into tight places

Handy Display Hold button keepsmeasurements on the display

Meter controls are positioned so currentmeasurements can be done with onehand (index fnger on clamp openinglever and thumb on rotary switch)

Three-year warranty

See specifcations chart on page 24.

Get more done

Just for our HVAC pros

True RMS

321 322 902

True-rms O

AC current O O O

AC voltage O O O

Resistance O O O

Continuity O O O

DC volts O O

DC current O

Min/Max/Avg OTemperature O

Capacitance O

Functions Range 321 322 902Current AC 0 to 400.0 A 1.8% 5 counts 1.8% 5 counts

0 to 600.0 A 2% 5 counts

Current DC 0 to 200.0 A 1% 5 counts

Voltage AC 0 to 600.0 V 1.2% 5 counts 1.2% 5 counts

600.0 V 1% 5 counts

Voltage DC 0 to 600.0 V 1% 5 counts 1% 5 counts

Resistance range 0 to 400 0 to 400 0 to 9999

Jaw opening 25.4 mm 25.4 mm 30.5 mm

Max. wire size 500 MCM 500 MCM 750 MCM

Fluke 321Fluke 322

Fluke 902

Features

Specifications


30/140

Fluke 355

350 Series AC/DC Clamp Meters

Included AccessoriesFluke 353: C43 Sot Meter Case, 6 AA batteries,users manualFluke 355: C43 Sot Meter Case, 6 AA batteries,TL224 SureGrip Silicone Test Lead Set, TP2Slim Reach Test Probe Set (2 mm), AC285SureGrip Alligator Clip Set, users manual

Ordering informationFluke 353 AC/DC Clamp MeterFluke 355 AC/DC Clamp Meter

Confdently take reliable readings withthe true-rms, Fluke 353/355 ClampMeters; the tools o choice or highcurrent measurement up to 2000 A. Theextra-wide jaw easily clamps aroundlarge conductors, typically ound in highcurrent applications. The rugged designand CAT IV 600 V, CAT III 1000 V ratingsadd an extra element o protection whentaking high-powered measurements.

Accurate peak measurements can betaken using the in-rush current mode -ideal or motors and inductive loads. The355 also measures voltage and resistance,making this the most versatile toolor utilities, electrical contractors andindustrial service technicians.

TL223-1 (Fluke 355)See page 122

L215 (Fluke 355)See page 123

Features


353 355

True-RMS measurementsO O

Display backlight O OMotor start-up current O OMin/Max/Average O OVoltage AC/DC OResistance measurement OContinuity measurement with beeper O

Specifications

Fluke 353

Power Supply: 6 x 1.5V AA NEDA 15Aor IEC LR6

Battery Lie: 100 hours (with typicalusage, backlight o)

Functions Range 353 355Current AC/DC 0-40.00 A 1.5% 15 counts 1.5% 15 counts

0-400.0 A 1.5% 5 counts 1.5% 5 counts0-2000 A; 1400 AC rms

Crest Factor 2.4 2.4Voltage AC/DC 0-4.000 V 1% 10 counts

0-40.00 V

1% 5 counts0-400.0 V0-600 V AC rms0-1000 V DC

Resistance 0-400.0

1.5% 5 counts0-4.000 k0-40.00 k0-400.0 k

Continuity beeper Appr. 30 Frequency 5.0Hz to 100.0Hz 0.2% 2 counts

100.1Hz to 999Hz 0.5% 5 counts


Size (HxWxD): 300 mm x 98 mm x 52 mmJaw opening: 58 mmWeight: 0.814 kgTwo year warranty

True RMS

True-RMS, 2000 A Clamp Metersfor industrial and utility applications


31/140

360 Leakage Clamp Meter

Included accessoriesSot carrying pouch and users manual

Ordering informationFluke 360 Leakage Clamp Meter

The Fluke 360 is ideal or non-invasive

checks o insulation resistance.The unique jaw design eliminates theinuence o adjacent current conductors.The ergonomic design o the Fluke 360ensures easy measuring. The measuringclamp fts into tight spaces and thewide display angle clearly shows themeasurement result. The data holdbutton keeps the measured value on thedisplay ater removing the clamp or themeasured conductor.

The light Fluke 360 oers the widestrange o current measurement ormaintenance proessionals andcontractors.

Features

Measurement o leakage protectivesconductor and touch current with aresolution o 1A

Advanced shielding to ensure accurateresults when measuring near otherconductors

Automatic ranging within the manuallyselected mA or A range

Easily viewed measurements on digitaland bargraph display and HOLD whenmeasuring in hard to see locations

Broad range o measurements currentsup to 60 A or all installation needs

Easy carrying, pocket sized clamp withwide 40 mm jaw size

Display-Hold or convenience in use

Auto power o with audible warningbuzzer Conormance to IEC61010 and EMC

standard Meets all the applications and

perormance classes in saety standardVDE0404-4 and the new VDE0702

leakagecurrent 0.5mA

ground

Specifications

Fluke 360

Battery type: 3 Volt Lithium, 90 hours typicalSize (HxWxD): 176 mm x 70mm x 25 mmWeight: 0.2kgOne Year warranty

Functions Range Resolution Accuracy

Current AC 3mA30mA0.001A0.01mA 1% 5 counts

30A60A

0.01A0.1A

1% 5 counts (0~50A)5% 5 counts (50~60A)

Frequency 50 and 60Hz


leakage current

1.2mA (e.g. viamotor shat)

display: 1.7mA

Leakage current measurements with a tough,pocket sized clamp meter


32/140

T100 SeriesVoltage and Continuity Testers

Included AccessoriesTwo 1.5V batteries and instruction sheet

Ordering InformationFluke T100 Voltage/Continuity TesterFluke T120 Voltage/Continuity TesterFluke T140 Voltage/Continuity Tester

UK versions are compliant with GS38


C33 (T100 Series)See page 130

Size (HxWxD): 240 mm x 56 mm x 24 mmCase: IP65 (water-jet and dust tight protection)Weight: 180 gTwo year warranty

Features

Specifications

Fluke T140

Fluke T100

Fluke T120

T100 T120 T140

Display LCD LCDLed Bargraph 12 LEDs 12 LEDs 12 LEDsBacklight OResistance measurement OSwitchable load OVoltage test O O OOptical and acoustical continuity test O O ORotary ield indication O O OSingle pole test or phase detection O O OIndication o polarity O O OElectrical torch unction O O OProbe tip protection O O OThe voltage display also unctions when usingdischarged - or o batteries

O O O

T100 T120 T140

Voltage AC/DC 12 - 690 V 12 - 690 V 12 - 690 VContinuity 0 - 400 k 0 - 400 k 0 - 400 kFrequency 0 - 400 Hz 0 - 400 Hz 0 - 400 HzPhase rotation 100 to 690 V 100 to 690 V 100 to 690 V

Resistance measurement - - Up to 1999 Response time < 0.1 s < 0.1 s < 0.1 s

The ast and easy solution to voltage,continuity and resistance measurements.Ideal or site conditions, the 3 modelso the T100 Series 2-pole testers have arugged construction and ergonomicallyormed housing or perect handling.All models oer a patented three-phaserotation detection system providingquick phase rotation indication.

Moreover they have a special electricaltorch unction or working in low lightlevel environments and have an ingressprotection rating o IP65. The T100 Seriesare compliant with EN 61010-1 andEN61243-3 requirements.

The fast and easy solution to voltage,continuity and phase rotation testing


33/140

T5 Electrical Testers


2 TP38 detachable probe (CAT III),2 TP1-1 detachable probe (CAT II),(detachable GS38 probes or the UK)and instruction sheet

Ordering InformationFluke T5-600 Electrical TesterFluke T5-1000 Electrical TesterFluke T5-H5-1AC Kit Electrical Tester with

holster and IACFluke T5-600/62/1AC-E Electrical Tester,

IR Thermometer,Voltage Detector Kit

The Fluke T5 testers let you checkvoltage, continuity and current withone compact tool. Select volts, ohms orcurrent and the instrument does the rest.Model T5-600 measures 600 voltsAC/DC, model T5-1000 is designed or1000 volts. OpenJaw current technologylets you check current up to 100 A,without breaking the circuit. The optionalH5 holster keeps the test probes andleads ready to test and lets you clip theT5 onto your belt.


ACC-T5-KitSee page 123

AC285See page 124

Features and Specifications

Fluke T5-H5-1AC Kit

Fluke T5-1000(incl. TP1-1 test probes)

Fluke T5-600(incl. TP1-1 test probes)

H5See page 131

Battery lie: 400 hoursSize (HxWxD):203 mm x 51 mm x 30.5 mm

Fluke T5-H5-1AC Kit

The ideal kit or busy electricalcontractors and electricians. The beneftso a voltage and current meter and non-contact voltage detector all in one kit. Aholster or the T5 is also included.

Kit includes:- Fluke T5-1000- H5 holster- Free Fluke 1AC-II

Fluke T5-600/62/1AC-E Kit

This kit is designed to help electriciansand HVAC technicians solve problemsquicker. Test frst or overheated electricaldevices using an IR thermometer; thenuse elecrtrical test tools to fnd out moreabout the problem.

Kit includes: Fluke T5-600 Fluke 62 Fluke 1AC II C115

T5-600 T5-1000

Display Count 1000 1000Automatic Selection O OContinuity and Bleeper O OSleep Mode O OAC Voltage 600 V 1000 VDC Voltage 600 V 1000 VAC Current 100 A 100 AResistance 1000 1000 Saety range 600V CAT III 1000 V CAT III / 600 V CAT IV

Weight: 0.38 kgTwo year warranty

The fast and easy solution to basicelectrical testing

Fluke T5-600/62/1AC-E Kit


34/140

2AC 1AC-II LVD2

1AC II/2AC Volt AlertsLVD1/LVD2 Volt Lights

2AC is the latest addition to the VoltAlert acnon- contact voltage tester amily rom Flukeand is designed to be pocket-sized and easy

to use. The 2AC tests or energized circuitsand deective grounds, whether its or anelectrician on the actory oor or the do-it-yourseler around the house. The tip o thepocket-sized tester will glow red when withinclose proximity o an outlet, terminal strip, orpower cord where voltage is present. Voltage detection rom 200 to 1000 V ac,

suitable or a wide range o residential,commercial and industrial needs.

NEW! Always on, using special low powercircuitry to sustain battery lie and ensureyour 2AC is always ready.

NEW! Innovative Battery Check buttonunction ensures battery is in goodcondition*

Category IV 1000 V overvoltage ratedproduct or best in class user protection Integrated clip design, optimized or pocket

storage Powered by 2x AAA batteries (included) Fluke ruggedness and reliability Two-year warranty storage. Powered by 2x AAA batteries (included)-

Fluke reliability and ruggedness, Two-yearwarranty.

LVD2

LVD1

2AC VoltAlertFluke 1AC II

Fluke 2AC VoltAlert

Ordering InformationFluke 1AC II Volt AlertFluke 1AC II Volt Alert (5-pack)Fluke 2AC Volt AlertFluke 2AC Volt Alert (5-pack)LVD2 Volt Light

LVD1 Volt Light

Dual sensitivity voltage detector Detects voltage rom 40 V to 300 V AC Blue light means youre close Red light means youre at the source Comes with a versatile clip to secure light

to pocket, hat or even panel door

Combines bright light and voltage detectionin one pen style design Dual sensitivity Detects voltage rom 90 V to 600 V AC Blue light means youre close Red light means youre at the source Rated to CAT IV 600 V

LVD1 Volt Light

LVD2 Volt Light

Operating range: 200 1000 V ACBatteries: Two AAA AlkalineSize (H): 148 mmTwo Year Warranty

Fluke 2AC VoltAlert 5-pack Buy 4 get 1 FREE

The Fluke VoltAlert AC voltage detector isvery easy to use just touch the tip to aterminal strip, outlet or cord. When the tipglows red and the unit beeps, you know thereis voltage on the line. It continually tests its battery and its circuit

integrity with a periodic double ash visualindication.

Highest saety rating: CAT IV 1000 V Detects voltage without metallic contact

Fluke 1AC II VoltAlert

Operating range: 200 1000 V ACBatteries: Two AAA AlkalineSize (H): 148 mmTwo Year Warranty

Fluke 1AC II VoltAlert 5-pack Buy 4 get 1 FREE

Voltage Detection

On/Off Button

Dual Sensitivity

Battery Check

Audible/Silent

Voltbeat

LED Flashlight

Battery Included

Features200-1000 V AC

CAT IV 1000 V200-1000 V AC

CAT IV 1000 V90-600 V ACCAT IV 600 V


35/140

9040/9062Phase Rotation Indicators


Fluke 9040: Alligator clips - black (3)Standard test probes - black (3)Flexible test probes - black (3)Fluke 9062: Alligator clips - black (3)Flexible test probes - black (3)Test leads - black (3)

Ordering InformationFluke 9040 Phase Rotation IndicatorFluke 9062 Motor and Phase Rotation

Indicator

Fluke 9040

The Fluke 9040 is eective or measuringphase rotation in all areas wherethree-phase supplies are used to eedmotors, drives and electrical systems.The Fluke 9040 is a rotary feld indicatorand can provide clear indication o the3 phase via an LCD display and thephase rotation direction to determinecorrect connections. It allows rapiddetermination o phase sequenceand has a voltage (up to 700 V) andrequency range suitable or commercialand industrial applications. Test probessupplied with the instrument have avariable clamping range or sae contact,especially in industrial sockets.

Fluke 9062

The unique Fluke 9062 provides rotaryfeld and motor rotation indication withthe benefts o contact-less detection.Purpose made or commercial andindustrial environments, the Fluke 9062provides rapid indication o 3 phaserotation using test leads supplied or canbe used to determine motor rotation onsynchronous and asynchronous 3 phasemotors. The contact-less detection isideal or use on motors where the shat isnot visible.Test probes supplied with the instrumenthave a variable clamping range or saecontact, especially in industrial sockets.


TLK291See page 123

C25See page 130

Features

9040:

TLK290See page 123

9062:

Specifications

Size (HxWxD) Fluke 9040:124 mm x 61 mm x 27 mmSize (HxWxD) Fluke 9062:124 mm x 61 mm x 27 mm

Fluke 9062 Applications

Determine the rotation ofrunning motors simply byplacing the instrument onthe motor casing.

Check the correct rotation ofmotors prior to connection.

Determine the presence ofphase sequence of multiphaseelectrical supplies.

9040 9062

3 phase indication Via LCD Via LEDIndication o phase rotation O OIndication o motor rotation direction OContact ree determination o the rotation direction o running motors OClear LCD display ONo battery required O

9040 9062

Voltage range 40 - 700 V Up to 400 VPhase display - 120 - 400 V ACFrequency range 15 - 400 Hz 2-400 HzOperating time Continuous Continuous

Power supply 9040: rom unit under testPower supply 9062: 1 x 9VWeight 9040: 0.20 kgWeight 9062: 0.15 kgTwo Year Warranty

Take the guess work out of phase/motorrotation measurements

Fluke 9040

Fluke 9062


36/140

2042 Cable Locator


TL27 Heavy Duty Test Lead Set (2)TP74 Lantern Tip Test Probe SetAC285 Alligator Clip SetSot carrying caseHard case

Ordering InformationFluke 2042 Cable Locator

(transmitter + receiver)Fluke 2042T Cable Locator Transmitter

The Fluke 2042 is a proessional general

purpose cable locator. It is ideal ortracing cables in walls and underground,locating uses/breakers on fnal circuitsand locating interruptions and short-circuits in cables and electrical oorheating systems.It can also be used or tracing metallicwater and heating pipes. The unit issupplied as a complete kit comprising oa transmitter and receiver in a purpose-made carry case. The receiver alsoincorporates a torch unction or workingin dimly lit locations.

For all applications (live or dead cables)without additional instruments

Set includes a transmitter and areceiver Proven digitally coded sender signal

guarantees clear signal identifcation Transmitter with LCD-display or

transmitting level, transmitting codeand external volt

catalog materiale electrice fluke

Documents