cat agri 2013.indd august 1st - magazin rulmenti online · page 6 agri industrial supply inc. call...
TRANSCRIPT
3708 Cherry RoadMemphis, TN [email protected]
901-367-9193 Toll Free 800-457-5348
Fax 901-366-7257
WWW.AGRI-INDUSTRIAL.COM
2013CATALOG
1-800-457-5348 • Fax 901-366-7257
[email protected] Cherry RoadMemphis, TN 38118
Your AGRI Inside Sales Representatives
Mike Messer • Buddy Shelton Maurice Buring • Eric Buring • Don E. Buring
Your AGRI Outside Sales Representatives
Walter Harrington • Clyde Kelly
Our Chief Financial Offi cer
Audrey Matheson
Our Warehouse Manager
Dale Edwards
Your Supplier for Bearings, Belts, Belt Sheaves, Roller Chain, Seals,
Ball Valves, Spray Hose, Disk Parts, Tractor Linkage,
P.T.O. Couplers & Adapters, Metric & Inch P.T.O. Assemblies,
Plus Many Other Agricultural and Industrial Parts
AGRI INDUSTRIAL SUPPLY, INC. • MEMPHIS, TN • WWW.AGRI-INDUSTRIAL.COM
1-800-457-5348 • Fax 901-366-7257
[email protected] Cherry RoadMemphis, TN 38118
Call Toll Free 1-800-457-5348 AGRI Industrial Supply Inc.
POLICIES & PROCEDURES
TERMSOur terms are 1% 10 days, net 10th prox. If your invoice is paid in full within 10 days from the issue date, you may deduct 1% of the net invoice (before freight), otherwise, invoices are due by the 10th of the next month, following the month-end statement. All accounts including pre-season, are subject to a 1½% fi nance charge each month past due. Your account will be put on credit hold and no orders will be shipped if account is over 45 days past due. We accept Mastercard®, Visa®, American Express and Discover®. With a letter of authorization, we will bill your credit card the amount owed on your account on the tenth (10th) of every month. To request a copy of an invoice or statement, email Audrey Matheson at [email protected], call 901-507-6552, or fax 901-507-6558.
FREIGHT POLICYFreight will be prepaid on orders of $1000.00 or more for any product listed in this 2013 catalog. Special order products will not qualify for free freight.
BACK ORDERSAny item back ordered will be shipped with the next customer order unless customer wants the item dropped shipped. Customer will then be responsible for freight.
SPECIAL ORDERSAny items not in the Agri Industrial Supply catalog or not stocked by Agri Industrial Supply are considered a special
order item. These items will be sent freight collect and are not subject to re to Agri Industrial Supply Inc.
RETURN POLICYAll merchandise must have prior approval before returning to Agri Industrial Supply Inc. for credit. A RGA must accompany the returned merchandise and must be attached on the outside of the package. We will refuse all shipments without an RGA or RGA number on the package. Items that are ordered incorrectly by the customer are
subject to a restocking charge and must be sent freight prepaid.
DISCLAIMERTo the best of our knowledge the contents of this catalog including applications and specifi cations are correct. We assume no liability for any errors in regard to those applications or specifi cations.
Reference numbers in this 2013 Catalog are subject to change without prior notice. Be sure to ask our sales representative about current pricing when ordering.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
TABLE OF CONTENTSIMPORT AND DOMESTIC BEARINGSPopular Cultivator, Disk, Ditcher, Grain Till, Planter, and Miscellaneous Implement Bearings ........................... 7-14Specialty Mounted Unites for Cultivators, Do-Alls, Ditchers, Holley Row Cultivators, and Shredders ..............15-16Monosem Planter Bearings and Chain ..........................................................................................................17Double Tapered Square Bore Bearings .........................................................................................................18Import and Domestic Disk Harrow Bearings ............................................................................................19-26Flanged Disk Units ...............................................................................................................................27-28Hex Bore Bearings ...............................................................................................................................29-30
IMPORT AND DOMESTIC MOUNTED UNITSImport Pillow Blocks, 2- and 4-Bolt Flanges ...........................................................................................31-34Medium Duty Pillow Blocks and 4-Bolt Flanges .............................................................................................35Mounted Units, Housings, and Collars Only ..................................................................................................36Light Duty 2- and 3-Bolt Flanges ................................................................................................................37Bearing Inserts - Import ......................................................................................................................38-42Bearing Inserts - Domestic ...................................................................................................................43-46Stamped Steel Mounted Flangettes .......................................................................................................47-48Type E Pillow Blocks and 4-Bolt Flanges .................................................................................................49-50Split Journal Bearings ...............................................................................................................................51
TIMKEN® TAPERED ROLLER BEARINGSTimken® Small and Large Bore Taper Roller ...........................................................................................52-54
RADIAL BALL BEARINGSLight, Standard, Medium, Double Row, and Beveled Type - Inch and Metric ...............................................55-61
NEEDLE ROLLER BEARINGSInch Dimension .......................................................................................................................................62
WHEEL AND HUB BEARING KITSPopular Bearing Kits Complete ..............................................................................................................63-66
COTTON PICKER BEARING KITSJohn Deere® Replacement ....................................................................................................................67-68Case IH® Replacement ..............................................................................................................................69
BALER BEARINGSJohn Deere® Replacement .........................................................................................................................70
GRAIN CARTEddins Replacement Parts .........................................................................................................................71
CATFISH AERATORSBearing Kits, UHMW Pillow Blocks, and Drivelines ........................................................................................72
CASE IH® REPLACEMENT PARTSBearings, Harrow Parts, Spools, Sleeves, Axles, and Miscellaneous Parts ...................................................73-77
SERVIS RHINO REPLACEMENT PARTSBearings, Drive Belts, Wheel Kits, Knives, Bolts, Bushing and Nuts ...........................................................78-79
UNVERFERTH RIPPER STRIPPERReplacement Hub, Bearings, Seals, and 3-Bolt Flange Assembly ...................................................................80
J&M MANUFACTURING Torsion-Flex Soil Conditioner .....................................................................................................................81
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Call Toll Free 1-800-457-5348 AGRI Industrial Supply Inc.
COMPLETE BEARING ASSEMBLIESFits Disks, Levee Plows, Ripper Strippers, and Strip Tills for Amco, Case IH®
KMC, Prime, Sunfl ower, and Unverferth ..................................................................................................82-84
REPLACEMENT JOHN DEERE® PARTSHippers, Disks, Planters, No-Till Plows, Bearings, Seals, Spools, Hubs,Chain, Spindle Kits, Bearing Guard ........................................................................................................85-92
DISK HIPPER AND LEVEE PLOW PARTSAxles, Housings, Spools, Spacers, and Parts for Amco, Forrest City, KMC, and W&A ...................................93-95
ALLOWAY AND CORN HEAD PARTSAlloway Flail Chopper Parts, Corn Head Gathering Chain and Sprockets .........................................................96
WHEEL HUBS AND SPINDLESHubs, Spindles, Bearings, and Dust Cap Seals ...................................................................................... 97-100
ROLLER CHAIN AND SPROCKETSSingle, Double, Heavy Duty, Extended Pitch, Conveyor Stainless Steel, Nickel Plated, Connecting Link - Import ............................................................................................. 101-103Single, Double, Heavy Duty, Extended Ditch, and Chain Breakers ......................................................... 104-105Steel Detachment .................................................................................................................................. 106Replacement Chain and Sprockets for John Deere® .................................................................................... 107Miscellaneous Chain Assemblies for IHC Planters, Ditchers, and John Deere® ................................................ 108Idler Sprockets and Idler Pulleys .............................................................................................................. 109
HYDRAULIC TIPS AND ADAPTERSTips, Complete Couplers, Adapters, Body Halves, Clamps, Dust Caps, and Plugs .................................... 110-111
SPLINED ADAPTERSShaft Adapters, Over-Running Couplers ............................................................................................. 112-115
P.T.O.Inch Dimension Components ............................................................................................................ 116-127Metric Dimension Components ......................................................................................................... 128-178
PB BLASTERPenetrating Oil ....................................................................................................................................... 179
HYDRAULIC CYLINDERSDomestic Cylinders, Relief Valves, and Accessories ............................................................................. 180-188
IRRIGATION SHAFTSSeries 37 and 41 Shafts .......................................................................................................................... 189
BALL VALVES AND COMPONENT PARTSBall Valves, Cam Couplers, and Component Parts for Fluid Handling ..................................................... 190-193
TRACTOR LINKAGE PARTSTop Links, Repair Ends, Stabilizer Arms and Brackets, Ball Sockets, Ball Ends, Replacement Balls, Reducer Bearings, Drawbars, Hitch Pins, Clevises, and Grab Hooks ...................................................... 194-205
BELTSConventional V-Belts: A, B, C, 3VX, 5VX, and Double V-Belts: AA and BB .............................................. 206-210
CAST IRON BOLT SHEAVESSingle Double, Bushing Type, and Bored To Size ................................................................................. 211-214
SOLID SHAFT COLLARSSteel Shaft Collars ......................................................................................................................... 215-216
PAGE 6 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Special Agricultural BearingsCultivator, Planter, and Implement
Our Special Agricultural Bearings Are NOT Manufactured in China!
Part # Description Diagram Ref. No.
885151E
Long Stem Cultivator BearingReplaces Case T26882. IHC® 526769R91, Glenco P3573.
5A50
A B C D
3.850” 1.531” 2.162” 0.6267”
885154B
Short Stem Cultivator BearingReplaces John Deere AN131668, Massey Ferguson
446612MI, Noble #369851.
5A50
A B C D
2.940” 1.531” 1.198” 0.6267”
885152
Short Stem Cultivator Bearing with HoleTo fi t John Deere 7000-7100 and IHC® 800 Planters
Replaces John Deere AA21015-AA35741, IHC® 128558C91, and Kinze A2022 Press Wheel and Closing Wheel. 5A50
A B C D E
2.938” 1.531” 1.250” 0.6267” 2.438”
885118B
Double Stem Cultivator BearingReplaces Glenco P6310, Massey Ferguson 42185MI,
Noble #601440F1. Also fi ts Lilliston.
5A50
A B C D
5.031” 1.531” 1.750” 0.6267”
DC2207F
Double Stem BearingFor Dickey Cultivator. 3/8” End Drilled & Tapped.
White #247658B.
6A95
A B C D E
5.024” 1.531” 1.747” 0.6267” 1.0625”
885175
Double Stem Packer Wheel BearingFor Marliss Grain Drill. Fits 4x12 and 2x13 Wheels.
Replaces Marliss #702017.
12A92
A B C D E
4.890” 1.531” 1.700” 0.6267” 0.475”
IMP
OR
T &
DO
MES
TIC
BEA
RIN
GS
Call Toll Free 1-800-457-5348 PAGE 7AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Part No. Description Diagram Ref. No.
Special Agricultural BearingsCultivator, Planter, and Implement
IMP
OR
T & D
OM
ESTIC
BEA
RIN
GS
Our Special Agricultural Bearings Are NOT Manufactured in China!
AGRI #AA38106
Stem Bearing with BushingTo fi t 7300 Planter Gauge Wheel. Bearing Only #885154B.
8A95
A B C D E
2.940” 1.531” 2.162” 0.6267” 1.585”
AGRI #AA35741WB
Stem Bearing with BushingTo fi t 7100 Planter Gauge Wheel. Bearing Only #885152.
8A95
A B C D E
2.940” 1.531” 2.162” 0.6267” 1.565”
202NPP9-IPickup Reel for Roanoke & Lilliston Peanut Combine
Ground Roller BearingReplaces Roanoke #6585 and Lilliston # 15-50-025.
4A75
202RRE-I
Cutter Head Bearing for Roanoke Tobacco PlanterReplaces Roanoke #24877
4A10
USAJ202KRR8 AG
P.O.R.
WK2250
Packer Wheel Bearing for IHCTo fi t 800 Series Planter. Replaces Part # IHC 140393C91.
8A50
A B C D
2.500” 1.500” 0.510” 2.125”
5203KYY2
Triple Lip Seal • Exact OEM ReplacementFits John Deere 750 No Till Grain Drill and Marker Assembly.
Also fi ts late model 1700 Planter. Replaces John Deere AN212132. Also fi ts Kinze Planter Part GA6171. Also fi ts Great Plain Planter; Replaces BCA® 5203VVAN, Fafnir
5203KYY2, and Koyo DAC 164044-2RS.
7A96
USA5203KYY2AG 15A95A B C D
1.725” 1.575” 0.640” 1.535”
PAGE 8 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Special Agricultural BearingsCultivator, Planter, and Implement
IMP
OR
T &
DO
MES
TIC
BEA
RIN
GS
Our Special Agricultural Bearings Are NOT Manufactured in China!
Part # Description Diagram Ref. No.
203-K
Inner Bearing for Models 296 & 386 IHC® Planter Disc Opener
Replaces IHC® #ST620 or 1969300C or 80437C91Inner Bearing for John Deere Closing Wheel
on 7300 PlanterReplaces John Deere #AA35638 & Fafnir #203KYP2.
4A55
Kit Number:2B35638
Components:
Bearing Assembly for Closing Wheel onJohn Deere 7300 Planter
Consists of Outer Bearing, Inner Bearing and Bushing.
10A75
4A55
203K Inner Bearing only for above. Ref. John Deere #AA34132.2A55
6203-2RS Outer Bearing only for above. Ref. John Deere 8535.
3A702B43769Bushing only for above. Ref. John Deere A43769. Replaces John
Deere AB35638.
203KRR2 For Planters, Gauge Wheel, Rotary Hoe, and Many Various Applications
BCA® 203RRAR10, Case F16246, Ford 222279, Gehl 520117, IHC® 666624R91, John Deere® JD9214, Lilliston #20-50-006,
New Holland 66553, White 2SH862
2A25
USA203RR2 AG
7A50
203KRR-5 Disc Opener for Bridger Planter Press Wheelfor Tye Grain Drill
Also fi ts IHC® Windrower, AC, JD, Case, and Other Applications. Replaces: IHC® 611928R91, Tye #522-20SP, BCA® #203RRAR8,
AC562134.
4A95
USA203KRR5 AG
$10.35
204BBAR3/4” Bore
Used on Various Cultivators, Gauge Wheels, Planters, Disc Tillers, Mowers, Spindles, Lawnmowers, and Other
Implement ApplicationsJohn Deere® JD9296, Lilliston #20-50-094, Swapper #10696,
Yazoo 204060, BCA® 204BBAR, Fafnir P204KRNP-2, Fafnir 204RR6, IHC® 465003R91
3A95
USA204RR6
6A25
204BBE-IFits Crust Buster & Great Plains Drills
Also fi ts Other Various ApplicationsReplaces: Fafnir 204RR8, Great Plains 822-003-C,
BCA® 204 BBE
4A95
USA204RR8 AG
14A65
Call Toll Free 1-800-457-5348 PAGE 9AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Special Agricultural BearingsCultivator, Planter, and Implement
IMP
OR
T & D
OM
ESTIC
BEA
RIN
GS
Our Special Agricultural Bearings Are NOT Manufactured in China!
Part # Description Diagram Ref. No.
204FGB-IWhite 3405, 3407, 3408 Air Planter Bearing for Disc
Opener and Seed DrillsFits TYE and Other Popular Models. Replaces: TYE 552-202,
BCA® 204FGB, White 300279B, Fafnir 204KRD4.
4A95
USA204KRD4 AG
19A80
204FREN-I Double Disc Opener for IH 800 Planter Disc Opener for John Deere® 7000-7100 Planter
Replaces: John Deere® AA21480, IHC® 145161C91, IHC® 1258017C91, IHC® 492757R91, IHC® 493532R91,
Fafnir 204RY2, KOYO-DG16452RS, BCA® 204FREN
4A95
USA204PY3 AG
5A65
204FRK-IWhite Planter Disk Furrower & Fertilizer Opener and
Planter BootSpecial Seals and Special Internal Clearance
with Wide Inner Ring
4A95
USAH204RR11 AG
14A58
205KR3-I
Will fi t John Deere and IH Coulter Wheels, IHC® Cotton Picker & Lilliston Carry Wheels
Replaces: BCA® 205RHN, IHC® 669807C91,John Deere® JD 9331, Lilliston 20-50-012
5A95
205KRR-27/8” Bore
Hex Bore Bearing for John Deere® 7000 - 7300 PlantersReplaces: JD AA28271, BCA® HPC014GP. Cylindrical O.D.
8A45
USA205KRR2 AG
18A65
205KRRB-27/8” Hex Bore Bearing for
John Deere® 7000 - 7300 PlanterReplaces: JDAA22097, JD9260, IHC® - 195293C,
Kinze G2-10003, BCA® HPS014GP
8A45
USA205KRRB-2 AG
18A65
205PP-10
Bore Potato Harvester Bearing withExtended Inner Ring and Triple Lip Seals
0.630” x 2.0472”
12A45
USA205PP10 AG
19A75
PAGE 10 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Special Agricultural BearingsCultivator, Planter, and Implement
IMP
OR
T &
DO
MES
TIC
BEA
RIN
GS
Our Special Agricultural Bearings Are NOT Manufactured in China!
Part # Description Diagram Ref. No.
205RVA Fits John Deere® 7000-7100 Folding Internal, Planter, Furrow Opener, and Outer Marker Arm
Bearing 1974 & UpFits Marliss and Best Drills W & A RCW Marker and Forrest City Planter Ripper. John Deere® A27002, Fafnir 205KRP2,
IHC® 1337998C1, Marliss 702020.
4A95
USA250KRP2
11A98
205PPB-7
Lilliston Cultivator with 15/16” BoreFits Kelly Mfg. Rolling Cultivator, Kelly Part #04-051-001.
Replaces: Lilliston 20-50-20 or 20-61-001, Rhino #70514.
5A45
205PPB-7 AG 10A50
205RRAN-I3/4” Bore Disc Opener For Marliss & Best Grain Drill
Also fi ts W&A Row Marker. Replaces: JD #B30418.6A95
205TNJ-I
3/4” BoreFits Lilliston Rolling Cultivator. Replaces: Lilliston #20-50-125, Kelly #03A51-008.
Also fi ts KMC Coulter.Same as Fafnir 205KP6.
5A95
205TNK-I
Fits John Deere® No Till Cultivator Gauge & Coulter Blade Hub Bearing
Replaces JD 104448. Fits Huber #N182580 &N216431. Also fi ts Landoll Cultivator #2-65-001030.
Replaces Fafnir #205KP-8.
5A97
USA205KP8 AG
12A95
205TTB-I Coulter Bearing on KMC Peanut Digger, Shaker, Inverter, and KMC Cultivators
3/4” Bearing fi ts in Hub #03-057-014 or Complete Assembly Hub #04-081-014. Also fi ts Lilliston Coulter
#1496 No Till Grain Drill. Replaces Bearing #04-051-004, 2 required per Hub. Replaces BCA® #205TTB.
Replaces Fafnir #205PP-9
8A95
USA205PP9 AG
17A75
Call Toll Free 1-800-457-5348 PAGE 11AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Part # Description Diagram Ref. No.
205VVH-IGrain Drill Bearings
Fits Marliss Grain Drill. Great Plains #188-001V. 5/8” Bore. Replaces #AA205DD.
5A92
206GGH-IMarker Disc Bearing for Orthman Row
Marker fi ts Hub Assembly #340-043 14” Orthman Barring Off Disc. Fits # 846 New Holland Round Baler
Idler Sprocket. Replaces #120-001, 120-070 and FAFNIR 206KPP16. Replaces NH - 701298 Cole Row Marker.
8A95
USA206KPP16 AG
19A55
206KPR4-I
Fits John Deere 450, 455, 515, 520 and 750 Grain Drills Standard Duty Marker Disk
Replaces: AA34616. Same as BCA 206RTQ.
9A85
USA206KPR4 AG
18A35
Special Agricultural BearingsCultivator, Planter, and Implement
IMP
OR
T & D
OM
ESTIC
BEA
RIN
GS
Our Special Agricultural Bearings Are NOT Manufactured in China!
206RRMN-I3/4” Bore Cole Planter Bearing
Same as 88506 CP and Timken® H206KRR26A95
1012KRRB-3Lilliston Cultivator With 3/4” Bore
Replaces: Lilliston 14-61-102. Replaces: BCA # 204GGB.5A99
88107IHC® 574428R91, BCA® 88107, Fafnir 207RR3
Popular Automotive8A50
PAGE 12 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Part # Description Diagram Ref. No.
88107BGG
Replaces John Deere # A30137. Fits Transmission Upper Feedroll Shaft for 8720 & 8730. Also fi ts 9940 & 9950 Cotton
Picker Inner Picking Unit Bevel Gear Shaft Drive Housing. Same as Timken® 207KRR-14.
11A75
88128-RPopular Picker, Implement, and Automotive Bearing
Fafnir 208KRR4, IHC® 662519R918A95
6006RK
John Deere® Row Cleaner AttachmentReplaces: JD #AA38601
Fits Yetter Trash Master BearingReplaces: #2570-594
10A95
6922RH-I Row Marker Bearing Right Hand Threads 14A97
8984YY-I
5/8” Cam Follower BearingFits on Amadas Combines.
Replaces: BCA® 8984YY, Fafnir 203KRR-3
9A95
USA203KRR3 AG
17A67
315261-OE
Orthman Cultivator Guidance SystemGauge Wheel and Coulter Wheel Hub. Original OEM Type.
6A99
USA315261 USA
15A65
Special Agricultural BearingsCultivator, Planter, and Implement
IMP
OR
T &
DO
MES
TIC
BEA
RIN
GS
Our Special Agricultural Bearings Are NOT Manufactured in China!
Call Toll Free 1-800-457-5348 PAGE 13AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Part # Description Diagram Ref. No.
AB16768John Deere® Disc Closing Attachment Bearing
for 1760, 1780, 7200 and 7300 PlantersAlso fi ts JD 51 Series Planter
5A50
AA205-3/4Fits Great Plains Grain Drill Row Unit with
Special 3/4” BoreReplaces: GP188-007V
5A92
AA59196Double Row Planter Bearing for John Deere®
1700 XP and XP ProReplaces : JD # AA59196
7A96
DS206GG7/8” Square Bore Bearing for King Disk Hiller
Spherical Bore9A92
GA8603
Coulter Wheel Bearing for Kinze 3000 Series Planters
8A99
A B C D
1.975” 2.4409” 1.182” 1.455”
GC1200KPPB-2
Ferguson Ditcher Bearing1-3/4” Hexagon Bore. OEM Uses Same Bearing.
43A95
USAGC1200KPPB-2 AG
83A89
KDD7505TT13/4” Stem Bearing for Cub Cadet
Blade Spindle Bearing. 3/4” Stem 5.05 Overall Length. 1.81 Barrel O.D. with grease fi tting.
18A90
Special Agricultural BearingsCultivator, Planter, and Implement
IMP
OR
T & D
OM
ESTIC
BEA
RIN
GS
PAGE 14 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Part # Description Diagram Ref. No.
S375-2RSNR5/8” Bore Dickeyvator Bearing with Snap RingLawnmower, Go-Kart, and Implement Bearing
Replaces: ND #499502-H3A25
RAL012PPB
Fafnir RAL012PPB IHC® 165482C91 Axle Bearing for Press Wheel Shaft on IHC® 296 & 396 Planter
UnitsAlso on IHC® 815 & 915 Combines
8A23
513001Honey Bee Header Bearing
Fits most Models.16A72
SBX0974Landoll Pulverizer Bearing
1-3/4” Bore. Replaces 1-065-010012 with locking collar.18A97
AGRI#10695
Single Disk Opener BearingFits John Deere 1560, 1565, 1590, 1690, 1860, 1890,
1895, and 1990 drills. Replaces JD #AN281313 used on hub #AN281313.
17A95
AFH204000AG
Pick Up Cylinder Bearing for John Deere BalerFits models 385, 435, 446, 457, 535, 556, 557, and other models. Replaces John Deere #AFH204000.
Replaces old John Deere #AG46215.
9A95
AGRI #513058
John Deere Mower Conditioner Drive Pulley Bearing
Fits John Deere mower 525, 535, 710, 720, 730, 735, 820, 910, 920, and 930. Replaces JD #AE53905.
36A84
205NTT-625Mechanical Transplanter Bearing5/8” Bore. Replaces Part #100DDD
Special Agricultural BearingsCultivator, Planter, and Implement
IMP
OR
T &
DO
MES
TIC
BEA
RIN
GS
Call Toll Free 1-800-457-5348 PAGE 15AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Special Agricultural BearingsCultivator, Planter, and Implement
Our Special Agricultural Bearings Are NOT Manufactured in China!
Do-Alls - Bearings Only
Part # Ref. No. Description
G1115KRRB 16A45 1-15/16” Replacement Insert Bearing for above. Import.
G1115KRRB-3 24A50 1-15/16” Triple-Lip Seal Bearing. Import.
G1115KRRB AG 37A75 1-15/16” Bearing. Made in USA.
G1115KPPB3 AG 57A09 1-15/16” Triple-Lip Seal Bearing. Made in USA.
Part No. Description Diagram Ref. No.
RAK 1-15/16” 1 15/16” Bore Do-All Pillow BlockWill fi t Forrest City #2048 & #3347, W&A
and many other models.Replaces BCA® PWG 1 15/16”.
25A80
USARAK 1-15/16”-USA
56A10
RCJ 1-15/16”
1 15/16” Bore 4 Bolt Mounting FlangeReplaces Forrest City #3816.Replaces BCA®
FWG 1-15/16”.
25A80
USARCJ 1-15/16”-USA
56A10
Cultivators
Part # Ref. No. Description
7355 13A95Complete Flange Unit 2-Bolt for McKee or any other Cultivator.
1-1/4” Bore with Mounting centers of 5-1/8”. Large Type Housing.
GRA104RRB 9A251-1/4” Insert Bearing for above only with Eccentric Locking Collar.
Regreaseable and with hole on the same side as the collar.
7361 12A80Complete Flange Unit 2-Bolt for Triple K, Forrest City #4356. Also fi ts
Glencoe or any other Cultivator mounting center of 4-9/32”. Small Type Housing.
GRA103RRB-2 6A951-1/4” Insert Bearing for above only with Eccentric Locking Collar,
Regreaseable and with hole on the same side as the collar.
RCJT 15/16 11A25For Ber-Vac Cultivator #600/615
Complete Flange Unit 2-Bolt with Eccentric Locking Collar.
G1015KRRB 6A85 1-15/16” Insert Bearing for above only with Eccentric Locking Collar.
UCFT-015 10A95 Same as above fl ange with set screw Locking.
UC-015 6A55 Bearing for above only with set screw Locking.
IMP
OR
T & D
OM
ESTIC
BEA
RIN
GS
PAGE 16 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Ditcher Bearings
Part # Ref. No. Description
USA1203KPPB4 AG
77A292-3/16” Prelubricated with Triple Lip Seals
Fits Amco #N11381, Farmhand, Levco #HDA15 & Glencoe.
1203KPPB-3 27A55 Ferguson Ditcher Bearing 1-3/4” Hex Bore. Import.
USAGC1200KPPB-2 AG
83A89 Ferguson Ditcher Bearing 1-3/4” Hex Bore. USA.
Part # Description Diagram Ref. No.
UCPI-15/16-H
Row Conditioner BearingFits most Holley models.
Special bolt hole. 1-15/16” bore.
27A99
FYR 2”
Spherical Roller FlangeRotor Drum Bearing
Fits Rhino RC-18 and RC-20 shredder.SKF brand.
254A20
FYR P 2-3/16”
Spherical Roller Flange OuterBearing fi ts Baltzer fl ail shredder.
Replaces Baltzer #61138.
303A37
FYR 2-3/16”
Spherical Roller BearingFits BHC 2000 Shredder.Replaces part #65861.
273A56
Special Agricultural BearingsCultivator, Planter, and Implement
IMP
OR
T &
DO
MES
TIC
BEA
RIN
GS
Call Toll Free 1-800-457-5348 PAGE 17AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Monosem Planter Bearings and ChainFor MS Mini Seed Planters, NG Plus Planters, and NC Shoe Type Planters
Replaces Monosen Part # Agri Part # Ref. No.
4407 6206-2R5 5A72
4408 6306-2R5 8A60
4413 Belt 460J19 29A22
4515.1 205KRRB-2 8A45
4515.1USA 205KRRB-2 AG 18A65
4525 6007-2R5 6A45
6221 6004-2R5 5A42
7014.A 5204-2R5 20A55
7081 885152 5A50
7081 ASSY AA 35741WB 8A45
KA2014 204FREN 4A45
KA2014 USA 204PY3 AG 5A95
KA5116 205KRR2 8A45
KA5116-USA 205KRR-2 AG 18A65
11579 6006-2R5 7A96
900125 5203KYY2 15A45
900125 USA 5203KYY2 AG 11A24
900259 Drive Chain 900259 AG P.O.R.
IMP
OR
T & D
OM
ESTIC
BEA
RIN
GS
PAGE 18 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Timken® Tapered Square Bore Bearing Kitsfor Discs and Levee Plows
Part # Ref. No. Description
AGRI #2 Kit 75A50
1-1/4” square bore double tapered roller bearing with 2 races and 2 seals. Fits John Deere discs AWR, BF, BFT, BWA, BWS; Replacement for John Deere
AB12603, JD8327 and B31312. Also fi ts Case IH and Kewanee discs and replaces 469384R91, 518819R91 and 469838R91.
AGRI #3 Kit 92A55
1-1/2” square bore double tapered roller bearing with 2 races and 2 seals.Replacement for John Deere® TW and TWA and Midland 840 and 950 discs. Also
fi ts Prime, Levee Plow discs, Cane Cultivators, Athens Plow and Peerless. Replaces AB14028 Replaces Prime #15850 bearings.
AGRI #3 Kit IMPORT
52A55 Same as above Timken® - Imported Agri brand
AGRI #4 Kit 128A931-1/8” square bore double tapered roller bearing with 2 races and 2 seals.
Fits Kewanee discs: 100, 200, 300, 700 and 900. Also fi ts IH 48 discs.
IMP
OR
T &
DO
MES
TIC
BEA
RIN
GS
Call Toll Free 1-800-457-5348 PAGE 19AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Import Heavy Duty Disc Harrow BearingsMade With Triple Lip Seals
Square (S) or Round (R) Bore - Cylindrical Outside Diameter
Our Disc Harrow Bearings Are NOT Manufactured in China!
Type 1 Type 2 Type 3 Type 4
Part # Replaces BCA® Ref. No. Type A. Bore B. O.D. SizeC. Inner
Ring WidthD. Outer
Ring WidthLubrication
Type
W208PP-5 DC208TTS 8A95 1 1/18” S 3.1496”/80mm 1.4375” 0.7087” Non-Relube
W208PP-6 DC208TT-6 10A95 1 1” S 3.1496”/80mm 1.4375” 0.7087” Non-Relube
W208PP-8 DC208TT-8 10A50 2 1-1/8” S 3.1496”/80mm 1.4375” 1.875” Non-Relube
W208PP-10 DC208TT-10 12A55 1 1-1/2” S 3.1496” Flat/80mm 1.688” 0.827” Non-Relube
W208PP-17 DC208TT-17 11A95 2 1-1/8” S 3.3758” Flat 1.4375” 1.1875” Non-Relube
W210PP DC210TT 15A97 2 1-15/16” R 3.5433”/90mm 1.9375” 1.3350” Non-Relube
W210PP-2 DC210TT-2 12A50 3 1-15/16” R 3.5433”/90mm 1.1875” 1.1875” Non-Relube
W210PP-4 DC210TT-4 11A50 3 1-1/8” S 3.5433”/90mm 1.1875” 1.1875” Non-Relube
W211PP-2 DC211TT-2 16A55 3 2-3/16” 3.9370”/100mm 1.3125” 1.3125” Non-Relube
W211PP-3 DC211TT-3 15A50 3 1-1/2” S 3.9370”/100mm 1.3125” 1.3125” Non-Relube
W211PP-5 DC211TT-2 22A90 2 1-1/2” S 4.000” 1.7500” 1.4380” Non-Relube
GW208PP-17 DC208TTR-17 12A95 2 1-1/8” 3.3758” 1.4375” 1.1875” Relube
GW209PP-8 DC209TTR-8 15A90 2 1-1/4” S 3.3465”/85mm 1.4375” 0.8661” Relube
GW210PP-3 DC210TTR-3 14A41 3 1.406” R 3.5433”/90mm 1.1875” 1.1875” Relube
GW210PP-4 DC210TTR-4 11A75 3 1-1/8” S 3.5433”/90mm 1.1875” 1.1875” Relube
GW211PP-2 DC21TTR-2 17A20 3 2-3/16” R 3.9370”/100mm 1.3125” 1.3125” Relube
GW211PP-3 DC211TTR-3 15A75 3 1-1/2” S 3.9370”/100mm 1.3125” 1.3125” Relube
GW211PP-17 DC21TTR-4 19A90 2 1-1/2” R 3.9370”/100mm 1.7500” 1.3125” Relube
GW211PP-25 DC211TTR-21 19A90 2 1-3/4” R 3.9370”/100mm 1.7500” 1.3125” Relube
GW211PP-27 DC21TTR-27 19A90 4 1-1/2” S 3.9370”/100mm 1.531” 1.3125” Relube
GW212PP-I DC212TTRA 31A99 2 1-3/4” R 4.3310”/110mm 1.695” 1.507” Relube
GW214PP-2 DC214TTR-2 47A92 3 2-3/4” 4.9213”/125mm 1.5625” 1.5625” Relube
GW214PP-3 DC214TTR-3 47A92 2 2.6875” R 4.9213”/125mm 2.6875” 1.5625” Relube
DC208TT-IDC208TT (Replaces Fafnir #W208K3
11A50 2 1-1/8” S 3.1496” 1.6875” 1.279” Non-Relube
DC212TTRBN-IDC212TTRBN (Replaces NTN SBX1226)
37A55 2 2.187” R 4.3307” 2.187” 1.504” Relube
IMP
OR
T & D
OM
ESTIC
BEA
RIN
GS
PAGE 20 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Import Heavy Duty Disc Harrow BearingsMade With Triple Lip Seals
Our Disc Harrow Bearings Are NOT Manufactured in China!
Square Bore - Spherical Outside Diameter
Type 1 Type 2 Type 3 Type 4
Part # Replaces BCA® Ref. No. Type A. Bore B. O.D. Size C. InnerRing Width
D. OuterRing Width
LubricationType
W208PPB-5 DS208TT-5 8A95 2 1-1/8” 3.1496”/80mm 1.4375” 0.7087” Non-Relube
GW208PPB-5 DS208TTR-5 9A95 2 1-1/8” 3.1496”/80mm 1.4375” 0.9449” Relube
W208PPB-6 DS208TT-6 10A50 1 1” 3.1496”/80mm 1.4375” 0.7087” Non-Relube
GW208PPB-6 DS208TTR-6 13A55 2 1” 3.1496”/80mm 1.4375” 0.9449” Relube
DS208TT-8 10A50 2 1-1/8” 3.1496”/80mm 1.4375” 1.875” Non-Relube
GW208PPB-8 DS208TTR-8 10A99 2 1-1/8” 3.1496”/80mm 1.4375” 1.875” Relube
W208PPB-11 DS208TT-11 11A75 4 7/8” 3.4380”/87mm 1.4375” 1.875” Non-Relube
W208PPB-12 DS208TT-12 10A75 4 1-1/8” 3.4380”/87mm 1.4375” 1.875” Non-Relube
W208PPB-13 DS208TT-13 11A75 1 7/8” 3.1496”/80mm 1.4375” 0.7087” Non-Relube
W209PPB-5 DS209TT-5 11A50 2 1-1/4” 3.3465”/85mm 1.4375” 1.1875” Non-Relube
GW209PPB-5 DS209TTR-5 12A75 2 1-1/4” 3.3465”/85mm 1.4375” 1.1875” Relube
W209PPB-7 DS209TT-7 16A55 4 1-1/4” 3.4380”/87mm 1.4375” 1.1875” Non-Relube
GW209PPB-8 DS209TTR-8 12A75 1 1-1/4” 3.3465”/85mm 1.4375” 0.8661” Relube
W210PPB-4 DS210TT-4 12A90 3 1-1/8” 3.5433”/90mm 1.875” 1.1875” Non-Relube
GW210PPB-4 DS210TTR-4 14A25 3 1-1/8” 3.5433”/90mm 1.875” 1.1875” Relube
W211PPB-3 DS211TT-3 14A90 3 1-1/2” 3.937”/100mm 1.3125” 1.3125” Non-Relube
GW211PPB-3 DS211TTR-3 15A75 3 1-1/2” 3.937”/100mm 1.3125” 1.3125” Relube
W211PPB-6 DS211TT-6 18A50 4 1-1/2” 4.1300” 1.7500” 1.4375” Non-Relube
GW211PPB-23 DS211TTR-23 19A95 2 1.565” 3.9800” 2.1250” 1.3350” Relube
IMP
OR
T &
DO
MES
TIC
BEA
RIN
GS
Call Toll Free 1-800-457-5348 PAGE 21AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Import Disc Harrow Bearings
Our Disc Harrow Bearings Are NOT Manufactured in China!
Round Bore - Spherical Outside Diameter
Type 1 Type 2 Type 3 Type 4 Type 5
Part # Replaces BCA® Ref. No. Type A. Bore B. O.D. Size C. InnerRing Width
D. OuterRing Width
LubricationType
W208PPB-2 DS208TT-2 12A95 1 1-1/2” 3.1496”/80mm 1.6875” 0.7087” Non-Relube
W208PPB-7 DS208TT-7 10A55 1 1-3/16” 3.1496”/80mm 1.1875” 0.7087” Non-Relube
W209PPB-2 DS209TT-2 11A50 3 1-25/32” 3.3465”/85mm 1.1875” 1.1875” Non-Relube
GW209PPB-2 DS209TTR-2 11A98 3 1-25/32” 3.3465”/85mm 1.1875” 1.1875” Relube
W209PPB-4 DS209TT-4 11A50 3 1-1/2” 3.3465”/85mm 1.1875” 1.1875” Non-Relube
GW209PPB-4 DS209TTR-4 11A98 3 1-1/2” 3.3465”/85mm 1.1875” 1.1875” Relube
GW209PPB-11 DS209TTR-10 11A98 1 1-3/4” 3.3465”/85mm 1.4375” 0.8661” Relube
W210PPB-2 DS210TT-2 12A50 3 1-15/16” 3.5433”/90mm 1.1875” 1.1875” Non-Relube
GW210PPB-2 DS210TTR-2 12A90 3 1-15/16” 3.5433”/90mm 1.1875” 1.1875” Relube
W210PPB-5 DS210TT-5 13A10 3 1-3/4” 3.5433”/90mm 1.1875” 1.1875” Non-Relube
GW210PPB-5 DS210TTR-5 14A95 3 1-3/4” 3.5433”/90mm 1.1875” 1.1875” Relube
W211PPB-2 DS21TT-2 14A50 3 2-3/16” 3.9370”/100mm 1.3125” 1.3125” Non-Relube
GW211PPB-2 DS211TTR-2 14A95 3 2-3/16” 3.9370”/100mm 1.3125” 1.3125” Relube
W211PPB-4 DS211TT-4 18A99 4 2.1874” 3.9370”/100mm 2.1870” 1.3120” Non-Relube
GW211PPB-9 DS211TTR-9 17A90 1 2.1880” 3.9370”/100mm 1.5625” 0.9843” Relube
GW211PPB-13 DS211TTR-13 22A95 1 1-3/4” 3.9370”/100mm 1.3125” 0.9843” Relube
GW214PPB-6 26A25 2 2.6881” 4.9213” 2.6875” 1.1024” Relube
AA28184 DS209TTR-13 17A97 5 1-3/4” 3.3465”/85mm 1.606” 1.1875” Relube
AA28186 DS211TTR-20 19A50 5 2-3/16” 3.9370”/100mm 1.811” 1.314” Relube
IMP
OR
T & D
OM
ESTIC
BEA
RIN
GS
PAGE 22 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
NEW Rubber Mounted Disk Harrow BearingsImport
Our Disc Harrow Bearings Are NOT Manufactured in China!
Part #Replaces
BCA® Replaces
KrauseA.
BoreB. Outside Diameter
Description Ref. No.
CDS209PPB-22 CDS209TTR6P 1927-11-01-1/2” Round
4”
Fits 1576-1592, 1900-1928, 1952-1979, 2100-2166, 2190-2196, 2200-2244, 3948-3957,3990-3994, 4900-4945, 4900A-4938A, and 4950-4994
24A79
Agri 40-167AG 40-1671-3/4” Round
4”
Fits Krause series 2232NR-2236NR, 2232WR-2234WR, 7300, 7400, 8100, 8200. Fits Krause Dominator front disc gang.
24A79
CDS211PPB-21 CDS211TTR-23 2410-11-0 1-3/4” 4.438”
Fits Krause series 1740-1767, 2400-2495, 5812-5824. Also fi ts 8300 Landoll Weather Proofer.Will fi t Great Plains Heavy Duty disc gang as-semblies on Turbo-Tills, Turbo Chopper, and Turbo Chisels.
37A40
These CDS Series bearing assemblies consist of heavy duty
import bearing with a separable rubber housing. These bearings
are RE-GREASEABLE and fi t many Krause applications.
IMP
OR
T &
DO
MES
TIC
BEA
RIN
GS
Call Toll Free 1-800-457-5348 PAGE 23AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Timken®/Fafnir® AMERICAN Heavy Duty Disc Harrow BearingsMade With Triple Lip Seals
Type 1 Type 2 Type 3
Square Bore - Cylindrical Outside Diameter
Part # Ref. No. Type A. Bore B. O.D. Size C. InnerRing Width
D. OuterRing Width
LubricationType
W208PP6 AG 31A90 1 1” 3.1496”/80mm 1.4375” 0.7087” Non-Relube
W208K2 AG* 37A55 2 1” 3.1496”/80mm 1.6875” 1.279” Non-Relube
W208K3 AG* 41A50 2 1-1/8” 3.1496”/80mm 1.6875” 1.2790” Non-Relube
W208PP5 AG 18A55 1 1-1/8” 3.1496”/80mm 1.4375” 0.7087” Non-Relube
W208PP8 AG 28A55 2 1-1/8” 3.1496”/80mm 1.4375” 1.1875” Non-Relube
GW208PP17 AG 34A50 2 1-1/8” 3.3755” 1.4375” 1.1880” Relube
W210PP4 AG 36A55 3 1-1/8” 3.5433”/90mm 1.1875” 1.1875” Non-Relube
GW210PP4 AG 50A62 3 1-1/8” 3.5433”/90mm 1.1875” 1.1875” Relube
W211PP3AG 47A10 3 1-1/2” 3.9370”/100mm 1.3125” 1.3125” Non-Relube
GW211PP3 AG 46A20 3 1-1/2” 3.9370”/100mm 1.3125” 1.3125” Relube
GW211PP17 AG 49A50 2 1-1/2” 3.9370”/100mm 1.7500” 1.3125” Relube
W211PP5 AG 56A16 2 1-1/2” 4.0000” 1.7500” 1.4380” Non-Relube
GW216PP2 AG 231A55 1 2-1/4” 5.5118”/140mm 2.5000” 1.1811” Relube
* With Removable External Seals.
IMP
OR
T & D
OM
ESTIC
BEA
RIN
GS
PAGE 24 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
AMERICAN Disc Harrow Bearings
Type 1 Type 2 Type 3
Part # Ref. No. Type A. Bore B. O.D. Size C. InnerRing Width
D. OuterRing Width
LubricationType
GW210PP3 AG 51A95 3 1.4060” 3.5433”/90mm 1.1875’ 1.1875’ Relube
W208PP10 AG 32A70 1 1-1/2” 3.1496”/80mm 1.6875” 0.8268” Non-Relube
GW211PP-37 AG 39A92 2 1.7750” 3.9370”/100mm 1.7500” 1.3125” Relube
W210PP10 AG 48A83 2 1-15/16” 3.5433”/90mm 1.9735” 1.3550” Non-Relube
W210PP2 AG 41A25 3 1-15/16” 3.5433”/90mm 1.1875” 1.1875” Non-Relube
GW210PP9 AG 43A85 2 1.9402” 3.5433”/90mm 1.4380” 0.9060” Relube
W211PP2 AG 48A55 3 2-3/16” 3.9370”/100mm 1.3125” 1.3125” Non-Relube
GW211PP2 AG 151A21 3 2-3/16” 3.9370”/100mm 1.3125” 1.3125” Relube
GW214PP2 AG 137A15 3 2-3/4” 4.9213”/125mm 1.5625” 1.5625” Relube
Round Bore - Cylindrical Outside Diameter
IMP
OR
T &
DO
MES
TIC
BEA
RIN
GS
Call Toll Free 1-800-457-5348 PAGE 25AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
AMERICAN Disc Harrow Bearings
Round Bore - Spherical Outside Diameter
Type 1 Type 2 Type 3
Part # Ref. No. Type A. Bore B. O.D. Size C. InnerRing Width
D. OuterRing Width
LubricationType
W208PPB7 AG 28A50 1 1-3/16” 3.1496”/80mm 1.1875” 0.7087” Non-Relube
W208PPB-2 AG 45A25 1 1-1/2” 3.1496”/80mm 1.688” 0.709” Non-Relube
W208PPB-23 AG 59A58 2 1-1/2” 3.1496”/80mm 1.688” 1.188” Non-Relube
W209PPB4 AG 32A55 3 1-1/2” 3.3465”/85mm 1.1875” 1.1875” Non-Relube
GW209PPB4 AG 34A50 3 1-1/2” 3.3465”/85mm 1.1875” 1.1875” Relube
W209PPB2 AG 31A25 3 1-3/4” 3.3465”/85mm 1.1875” 1.1875” Non-Relube
GW209PPB2 AG 36A50 3 1-3/4” 3.3465”/85mm 1.1875” 1.1875” Relube
GW209PPB11 AG 27A20 1 1-3/4” 3.3465”/85mm 1.4375” 0.8661” Relube
W210PPB5 AG 43A55 3 1-3/4” 3.5433”/90mm 1.1875” 1.1875” Non-Relube
GW210PPB-5 AG 53A20 3 1-3/4” 3.5433”/90mm 1.188” 1.188” Relube
GW211PPB13 AG 51A50 1 1-3/4” 3.9370”/100mm 1.3125” 0.9843” Relube
W210PPB2 AG 43A55 3 1-15/16” 3.5433”/90mm 1.1875” 1.1875” Non-Relube
GW210PPB2 AG 42A85 3 1-15/16” 3.5433”/90mm 1.1875” 1.1875” Relube
GW211PPB14 55A65 1 2” 3.9370”/100mm 1.3120” 0.9843” Relube
GW211PPB8 AG 54A60 1 2-3/16” 3.9370”/100mm 1.3125” 0.9843” Relube
W211PPB2 AG 52A14 3 2-3/16” 3.9370”/100mm 1.3125” 1.3125” Non-Relube
GW211PPB2 AG 43A75 3 2-3/16” 3.9370”/100mm 1.3125” 1.3125” Relube
GW211PPB9 AG 40A95 1 2-3/16” 3.9370”/100mm 1.5625” 0.9843” Relube
GW211PPB-13 AG 51A50 2 1-3/4” 3.9370”/100mm 1.312” 0.984” Relube
GW211PPB-14 AG 55A65 2 2” 3.9370”/100mm 1.312” 0.984” Relube
GW214PPB5 AG 261A50 2 2.7553” 4.9213”/125mm 2.4380” 1.5620” Relube
GW214PPB2 AG 163A65 3 2.7580” 4.9213”/125mm 1.5625” 1.5625” Relube
IMP
OR
T & D
OM
ESTIC
BEA
RIN
GS
PAGE 26 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Square Bore - Spherical Outside Diameter
Part # Ref. No. Type A. Bore B. O.D. Size C. InnerRing Width
D. OuterRing Width
LubricationType
W208PPB11 AG 35A84 4 7/8” 3.4380”/87mm 1.4375” 1.1875” Non-Relube
W208PPB13 AG 33A51 1 7/8” 3.1496”/80mm 1.4375” 0.7087” Non-Relube
W208PPB6 AG 23A47 1 1” 3.1496”/80mm 1.4375” 0.7087” Non-Relube
GW208PPB6 AG 43A36 2 1” 3.1496”/80mm 1.4375” 0.9449” Relube
W208PPB5 AG 18A99 2 1-1/8” 3.1496”/80mm 1.4375” 0.7087” Non-Relube
GW208PPB5 AG 28A50 2 1-1/8” 3.1496”/80mm 1.4375” 0.9449” Relube
GW208PPB8 AG 37A58 2 1-1/8” 3.1496”/80mm 1.4375” 1.1875” Relube
W208PPB12 AG 26A55 4 1-1/8” 3.4380”/87mm 1.4375” 1.1875” Non-Relube
W210PPB4 AG 42A55 3 1-1/8” 3.5433”/90mm 1.1875” 1.1875” Non-Relube
GW210PPB4 AG 40A92 3 1-1/8” 3.5433”/90mm 1.1875” 1.1875” Relube
W209PPB5 AG 45A93 2 1-1/4” 3.3465”/85mm 1.4375” 1.1875” Non-Relube
GW209PPB5 AG 52A99 2 1-1/4” 3.3465”/85mm 1.4375” 1.1875” Relube
GW209PPB8 AG 36A96 1 1-1/4” 3.3465”/85mm 1.4375” 0.8661” Relube
W211PPB3 AG 46A50 3 1-1/2” 3.9370”/100mm 1.3125” 1.3125” Non-Relube
GW211PPB3 AG 42A55 3 1-1/2” 3.9370”/100mm 1.3125” 1.3125” Relube
W211PPB6 AG 52A55 4 1-1/2” 4.1300” 1.7500” 1.4375” Non-Relube
Type 1 Type 2 Type 3 Type 4
AMERICAN Disc Harrow Bearings
IMP
OR
T &
DO
MES
TIC
BEA
RIN
GS
Call Toll Free 1-800-457-5348 PAGE 27AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Import Flanged Disc Units
• Dynamic alignment• Positive relubrication• Close clearance shroud protects bearing• Plated case hardened stampings• Solid rivet• Made with NEW MAX-A SEAL
Part # Ref. No. BCA®# Fafnir # A. Shaft Size B. C. D. E.
ST491A-AG 19A95 FD209RJA DHU491A 1-3/4” Round 1.640 1.687 5.00 5.00
FD208R-I* 13A50 1” Square 1.378 1.503 4.75 4.69
FD208R-11/8-I 14A79 1-1/8” Square 1.378 1.503 4.75 4.69
FD209RB-I 18A95 FD209RB DHU 1-1/2 R209 1-1/2” Round 1.640 1.687 5.00 5.00
FD209RK-I 19A97 FD209RK DHU 1-1/4 S209 1-1/4” Square 1.640 1.687 5.00 5.00
FD209RM-I 19A95 FD209RM DHU 1-1/8 S209 1-1/8” Square 1.640 1.687 5.00 5.00
FD210R-I 23A55 FD210R 1-1/8” Square 1.750 1.750 5.00 5.00
FD211RB-I 27A45 FD211RB DHU 23/16 R211 2-3/16” Round 1.799 2.187 5.50 5.50
FD211RJA-I 29A45 FD211RJA DHU 1-15/16 C211 1-15/16” Round 1.799 2.125 5.50 5.50
FD211RM-I 24A55 FD211RM DHU 1-1/2” R211 1-1/2” Square 1.799 2.125 5.50 5.50
* Also available in relubicatable style, add “G” to number
Application
ST491A Fits 470, 480, 490, 610, 760, 3800, 3950 IHC®Discs
FD208R-I Fits Modern, Monroe Tuffl ine, IHC®, King Kutter, and Howse
FD208R-11/8-I Same as above
FD209RB-I Fits IHC® and Krause discs; IHC® #ST3027
FD209RK-I Fits Krause discs
FD209RM-I Fits Kewanee, Taylor, and White discs
FD210R-I Fits Kewannee and some Krause discs
FD211RB-I Fits IHC® 500 and 501 discs; replaces IHC® #ST740B
FD211RJA-I Fits IHC®, John Deere®, and Noble Do Alls; replaces IHC® #ST3012A
FD211RM-I Fits B3587 Kewanne disc harrows
IMP
OR
T & D
OM
ESTIC
BEA
RIN
GS
PAGE 28 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
AMERICAN Flanged Disc UnitsTimken®
Flanged disc harrow bearing units are integral assemblies specifi cally designed for the most severe tillage applications. Each confi guration incorporates certain special dimensional attributes making the unit compatible in a variety of equipment designs. Inherent in most designs are two heavy gauge case hardened and zinc plated stampings which encapsulate the bearing with eight cold formed rivets for guaranteed integrity. Within the cavity two nitril O-rings are installed to exclude contaminates and provide a grease seal to ensure lubricant feeds directly into the bearing. The grease fi tting is permanently retained in the stamping for easy access and maximum protection for the environment.
Part # Ref. No. A. Shaft Size B. C. D. E. Bolt Hole
DHU491A AG
Ask customer service
forpricing
1-3/4” Round 1.6400” 1.6870” 5.0000” 5.0000” 0.531”
DHU 1-1/2-209 1-1/2” Round 1.6400” 1.6870” 5.0000” 5.0000” 0.531”
DHU 1-1/4 AG 1-1/4” Square 1.6400” 1.6870” 5.0000” 5.0000” 0.531”
DHU 1-1/8 AG 1-1/8” Square 1.6400” 1.6870” 5.0000” 5.0000” 0.531”
DHU 2-3/16 AG 2-3/16” Round 1.7990” 2.1870” 5.5000” 5.5000” 0.531”
DHU 1-3/4 AG 1-3/4” Round 1.7990” 2.1870” 5.5000” 5.5000” 0.531”
DHU 1-15/16 AG 1-15/16” Round 1.7990” 2.1250” 5.5000” 5.5000” 0.531”
DHU 1-1/2-211 1-1/2” Square 1.7990” 2.0000” 5.5000” 5.5000” 0.531”
DHU 405-211 40mm Square 1.7990” 2.0060” 5.5000” 5.5000” 0.531”
Ask your AGRI Customer Service Rep for quantity pricing.
• Dynamic alignment
• Positive relubrication
• Close clearance shroud protects bearing
• Circumferentially restrained outer ring
• High performance USA disc harrow bearing
• Plated case hardened stampings
• Solid rivet
IMP
OR
T &
DO
MES
TIC
BEA
RIN
GS
Call Toll Free 1-800-457-5348 PAGE 29AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Hex Bore Cylindrical O.D.Import and Domestic
Part # Ref. No. Shaft Size A. Outside Diameter B. Outer Ring Width C. Inner Ring Width
204KRR2 AG 19A95 11/16” 1.8504”/47mm 0.5512”/14mm 0.8250”
205KRR2 AG 18A65 7/8” 2.0472”/52mm 0.5906”/15mm 1.0000”
206KRR6 AG 21A50 1” 2.4409”/62mm 0.6299”/16mm 0.9449”
206KPP3 AG* 29A99 1” 2.4409”/62mm 0.6299”/16mm 0.9449”
207KRR17 AG 32A25 1-1/4” 2.8346”/72mm 0.6693”/17mm 0.9843”
W208PP21 AG 23A50 1-1/4” 3.1496”/80mm 0.7087”/18mm 1.4375”
* Triple Lip
Domestic
Part # Ref. No. Interchangeswith Fafnir # Shaft Size A. Outside
DiameterB. Outer
Ring WidthC. Inner
Ring Width
205KRR2-I 8A45 205KRR2 AG 7/8” 2.0472”/52mm 0.5906”/15mm 1.000”
HPC100GP-I 8A60 206KRR6 AG 1” 2.4409”/62mm 0.6299”/16mm 0.9449”
HPC103TPA-I** 26A58 1-1/4” 90mm 0.8661”/22mm 1.432”
HPC104TPA-I 18A55 W208PP21 1-1/4” 3.1496”/80mm 0.7087”/18mm 1.4375”
* * NTN Brand
Import
IMP
OR
T & D
OM
ESTIC
BEA
RIN
GS
PAGE 30 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Hex Bore Spherical O.D.Import and Domestic
Part # Ref. No. Shaft Size A. Outside Diameter B. Outer Ring Width C. Inner Ring Width
205KRRB2 AG 18A55 7/8” 2.0472”/52mm 0.5906”/15mm 1.0000”
206KRRB6 AG 18A50 1” 2.4409”/62mm 0.6299”/16mm 0.9449”
207KRRB12 AG 24A85 1-1/8” 2.8346”/72mm 0.6693”/17mm 0.9843”
207KRRB17 AG 28A50 1-1/4” 2.8346”/72mm 0.6693”/17mm 0.9843”
W208PPB-16 AG 26A80 1-1/4” 3.1496”/80mm 0.8661”/22mm 1.4375”
W208KRRB-6 AG 51A15 1-3/8” 3.1496”/80mm 0.8268”/21mm 1.4375”
209KRRB2 AG 38A95 1-1/2” 3.3465”/85mm 0.7480”/19mm 1.1811”
210RRB6 AG 33A25 1-1/2” 3.5433”/90mm 0.8661”/22mm 1.1811”
Domestic
Import
Part #Interchangeswith Timken®
Ref. No. Shaft Size A. Outside Diameter B. Outer Ring Width C. Inner Ring Width
205KRRB2-I 205KRRB-2 8A45 7/8” 2.0472”/52mm 0.5906”/15mm 1.0000”
HPS100GP-I 206KRRB-3 8A40 1” 2.4409”/62mm 0.6299”/16mm 0.9449”
HPS102GPE-I 207KRRB-12 13A25 1-1/8” 2.8346”/72mm 0.6693”/17mm 0.9843”
HPS102GR-I G207KPPB-2 17A50 1-1/8” 2.8346”/72mm 0.6693”/17mm 0.9843”
HPS104TR-I GW208PPB22 17A99 1-1/4” 3.1496”/80mm 0.8661”/22mm 1.4375”
HPS108GPB-I 210RRB-6 19A20 1-1/2” 3.5433”/90mm 0.8661”/22mm 1.1811”
HPS108GPH-I 209KRRB-2 19A50 1-1/2” 3.3465”/85mm 0.7480”/19mm 1.1811”
IMP
OR
T &
DO
MES
TIC
BEA
RIN
GS
Call Toll Free 1-800-457-5348 PAGE 31AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
RAK Cast Iron Pillow BlocksWide Inner Ring Bearings • Slinger Seal Designed Mounted Units with Eccentric Locking Collars • Import
Our Cast Iron Pillow Blocks Are NOT Manufactured in China!
Part #
Shaft Diam.Ref. No. A B C D E
RAK 5/8” 8A95 3-3/4” 5” 1-3/16” 2-1/8” 3/8”
RAK 3/4” 9A99 3-3/4” 5” 1-1/4” 2-1/2” 3/8”
RAK 7/8” 10A55 4-1/8” 5-1/2” 1-5/16” 2-5/8” 3/8”
RAK 15/16” 10A95 4-1/8” 5-1/2” 1-5/16” 2-5/8” 3/8”
RAK 1” 10A95 4-1/8” 5-1/2” 1-5/16” 2-5/8” 3/8”
RAK 1-1/16” 13A45 4-3/4” 6-5/16” 1-9/16” 3-5/32” 1/2”
RAK 1-1/8” 13A45 4-3/4” 6-5/16” 1-9/16” 3-5/32” 1/2”
RAK 1-3/16” 13A45 4-3/4” 6-5/16” 1-9/16” 3-5/32” 1/2”
RAK 1-1/4”-R* 13A45 4-3/4” 6-5/16” 1-9/16” 3-5/32” 1/2”
RAK 1-1/4” 15A95 5” 6-9/16” 1-13/16” 3-11/16” 1/2”
RAK 1-5/16” 15A95 5” 6-9/16” 1-13/16” 3-11/16” 1/2”
RAK 1-3/8” 15A95 5” 6-9/16” 1-13/16” 3-11/16” 1/2”
RAK 1-7/16” 15A95 5” 6-9/16” 1-13/16” 3-11/16” 1/2”
RAK 1-1/2” 16A90 5-1/2” 7-1/8” 1-15/16” 3-27/32” 1/2”
RAK 1-9/16” 19A99 5-1/2” 7-1/8” 1-15/16” 3-27/32” 1/2”
RAK 1-5/8” 23A50 5-3/4” 7-15/32” 2-1/16” 4-3/16” 1/2”
RAK 1-11/16” 23A50 5-3/4” 7-15/16” 2-1/16” 4-3/16” 1/2”
RAK 1-3/4” 23A50 5-3/4” 7-15/32” 2-1/16” 4-3/16” 1/2”
RAK 1-7/8” 25A80 6-1/4” 8” 2-3/16” 4-3/16” 1/2”
RAK 1-15/16” 25A80 6-1/4” 8” 2-3/16” 4-7/16” 5/8”
RAK 2-2R** 27A90 6-1/4” 8” 2-3/16” 4-7/16” 5/8”
RAK 2” 33A90 7-1/8” 9-1/8” 2-7/16” 4-7/16” 5/8”
RAK 2-1/8” 33A90 7-1/8” 9-1/8” 2-7/16” 4-29/32” 5/8”
RAK 2-3/16” 33A90 7-1/8” 9-1/8” 2-7/16” 4-29/32” 5/8”
RAK 2-1/4” 42A50 7-1/2” 9-1/2” 2-3/4” 4-29/32” 5/8”
RAK 2-3/8” 42A50 7-1/2” 9-1/2” 2-3/4” 5-1/2” 5/8”
RAK 2-7/16” 42A50 7-1/2” 9-1/2” 2-3/4” 5-1/2” 5/8”
RAK 2-1/2” 56A95 8” 10-7/16” 3” 6-3/4” 3/4”
RAK 2-15/16” 54A50 8-17/32” 10-13/16” 3-1/4” 6-5/8” 3/4”
RAK 3” 59A70 8-17/32” 10-13/16” 3-1/4” 6-5/8” 3/4”
**206 Outer **210 Outer - 2” Bore For pillow blocks with set screw locking use prefi x UCP and bore size required.
IMP
OR
T & D
OM
ESTIC
MO
UN
TED U
NITS
PAGE 32 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Our Replacement 4-Bolt Cast Iron Flange Units Are NOT Manufactured in China!
4-Bolt Cast Iron Flange UnitsWide Inner Ring Bearings • Slinger Seal Designed Mounted Units with Eccentric Locking Collars • Import
**206 Outer **210 Outer - 2” Bore For fl anges with set screw locking use prefi x UCF and bore size required.
Part #
Shaft Diam.Bore Size Ref. No. A B C D E F G Bolt Size
RCJ 5/8” 5/8” 8A95 2-1/2” 3-3/8” 3/8” 1-5/16” 1.7953” 1.7126” 1.26” 3/8”
RCJ 3/4” 3/4” 9A99 2-1/2” 3-3/8” 3/8” 1-5/16” 1.7953” 1.7126” 1.26” 3/8”
RCJ 7/8” 7/8” 10A95 2-3/4” 3-3/4” 7/16” 1-3/8” 1.8819” 1.7441” 1.50” 3/8”
RCJ 15/16” 15/16” 10A95 2-3/4” 3-3/4” 7/16” 1-3/8” 1.8819” 1.7441” 1.50” 3/8”
RCJ 1” 1” 10A95 2-3/4” 3-3/4” 7/16” 1-3/8” 1.8819” 1.7441” 1.50” 3/8”
RCJ 1-1/8” 1-1/8” 13A45 3-1/4” 4-1/4” 5/8” 1-15/32” 2.0079” 1.9016” 1.50” 7/16”
RCJ 1-1/16” 1-1/16” 13A45 3-1/4” 4-1/4” 5/8” 1-15/32” 2.0079” 1.9016” 1.75” 7/16”
RCJ 1-3/16” 1-3/16” 13A45 3-1/4” 4-1/4” 5/8” 1-15/32” 2.0079” 1.9016” 1.75” 7/16”
RCJ 1-1/4”-R* 1-1/4”-R 15A95 3-1/4” 4-1/4” 5/8” 1-15/32” 2.0079” 1.9016” 1.75” 7/16”
RCJ 1-1/4” 1-1/4” 15A95 3-5/8” 4-5/8” 1/2” 1-1/2” 2.1771” 2.0118” 1.75” 7/16”
RCJ 1-5/16” 1-5/16” 15A95 3-5/8” 4-5/8” 1/2” 1-1/2” 2.1771” 2.0118” 2.19” 7/16”
RCJ 1-3/8” 1-3/8” 15A95 3-5/8” 4-5/8” 1/2” 1-1/2” 2.1772” 2.0118” 2.19” 7/16”
RCJ 1-7/16” 1-7/16” 15A95 3-5/8” 4-5/8” 1/2” 1-1/2” 2.1772” 2.0118” 2.19” 7/16”
RCJ 1-1/2” 1-1/2” 16A90 4” 5-1/8” 21/32” 1-17/32” 2.3740” 2.2165” 2.19” 1/2”
RCJ 1-9/16” 1-9/16” 23A50 4” 5-1/8” 21/32” 1-17/32” 2.3740” 2.2165” 2.37” 1/2”
RCJ 1-5/8” 1-5/8” 23A75 4-1/8” 5-3/8” 21/32” 1-9/16” 2.3740” 2.2165” 2.50” 9/16”
RCJ 1-11/16” 1-11/16” 23A75 4-1/8” 5-3/8” 21/32” 1-9/16” 2.3740” 2.2165” 2.50” 9/16”
RCJ 1-3/4” 1-3/4” 23A75 4-1/8” 5-3/8” 5/8” 1-9/16” 2.3740” 2.2165” 2.50” 9/16”
RCJ 1-7/8” 1-7/8” 25A80 4-3/8” 5-5/8” 5/8” 1-13/16” 2.6417” 2.4685” 2.75” 9/16”
RCJ 1-15/16” 1-15/16” 25A80 4-3/8” 5-5/8” 5/8” 1-13/16” 2.6417” 2.4685” 2.75” 9/16”
RCJ 2-2R** 2” 27A90 4-3/8” 5-5/8” 5/8” 1-13/16” 2.6417” 2.4685” 2.75” 9/16”
RCJ 2” 2” 33A90 5-1/8” 6-3/8” 11/16” 1-31/32” 2.9803” 2.8110” 3.00” 5/8”
RCJ 2-3/16” 2-3/16” 33A90 5-1/8” 6-3/8” 11/16” 1-31/32” 2.9803” 2.8110” 3.00” 5/8”
RCJ 2-1/8” 2-1/8” 37A92 5-1/8” 6-3/8” 11/16” 1-31/32” 2.9803” 2.8110” 3.00” 5/8”
RCJ 2-1/4” 2-1/4” 42A50 5-5/8” 6-7/8” 11/16” 2-5/32” 3.1890” 3.0630” 3.31” 5/8”
RCJ 2-3/8” 2-3/8” 42A50 5-5/8” 6-7/8” 11/16” 2-5/32” 3.1890” 3.0630” 3.31” 5/8”
RCJ 2-7/16” 2-7/16” 42A50 5-1/8” 6-3/8” 11/16” 2-5/32” 3.1890” 3.0630” 3.00” 5/8”
RCJ 2-1/2” 2-1/2” 56A95 5-7/8” 7-3/8” 7/8” 2-5/16” 3.53” 3.374” 3.39” 5/8”
RCJ 2-15/16” 2-15/16” 58A30 6-1/4” 7-7/8” 7/8” 2-9/16” 3.7638” 3.6260” 4.00” 5/8”
RCJ 3” 3” 59A70 6-1/4” 7-7/8” 7/8” 2-9/16” 3.7638” 3.6260” 4.00” 5/8”
IMP
OR
T &
DO
MES
TIC
MO
UN
TED
UN
ITS
Call Toll Free 1-800-457-5348 PAGE 33AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Our Replacement 2-Bolt Cast Iron Flange Units Are NOT Manufactured in China!
2-Bolt Cast Iron FlangeWide Inner Ring Bearings • Slinger Seal Designed Mounted Units with Eccentric Locking Collars • Import
**206 Outer **210 Outer - 2” Bore For fl anges with set screw locking use prefi x UCFT and bore size required.
Part #
Shaft Diam.
Bore
SizeRef. No. A B C D E F G Bolt Size
RCJT 5/8” 5/8” 8A95 4 7/16” 3 17/32” 2 3/8” 7/16” 1 1/4” 1.7953” 1.26” 3/8”
RCJT 3/4” 3/4” 9A95 4 7/16” 3 17/32” 2 3/8” 7/16” 1 1/4” 1.7953” 1.26” 3/8”
RCJT 7/8” 7/8” 10A95 4 7/8” 3 57/64” 2 3/4” 17/32” 1 5/16” 1.8110” 1.50” 3/8”
RCJT 15/16” 15/16” 10A95 4 7/8” 3 57/64” 2 3/4” 17/32” 1 5/16” 1.8110” 1.50” 3/8”
RCJT 1” 1” 10A95 4 7/8” 3 57/64” 2 3/4” 17/32” 1 5/16” 1.8110” 1.50” 3/8”
RCJT 1 1/8” 1 1/8” 14A50 5 9/16” 4 19/32” 3 1/8” 17/32” 1 3/8” 2.0118” 1.75” 3/8”
RCJT 1 3/16” 1 3/16” 14A50 5 9/16” 4 19/32” 3 1/8” 17/32” 1 3/8” 2.0118” 1.75” 3/8”
RCJT 1 1/4”-R* 1 1/4” 14A50 5 9/16” 4 19/32” 3 1/8” 17/32” 1 3/8” 2.0118” 1.75” 3/8”
RCJT 1 1/4” 1 1/4” 15A95 6 1/8” 5 1/8” 3 5/8” 9/16” 1 15/32” 2.1172” 2.19” 1/2”
RCJT 1 5/16” 1 5/16” 15A95 6 1/8” 5 1/8” 3 5/8” 9/16” 1 15/32” 2.1172” 2.19” 1/2”
RCJT 1 3/8” 1 3/8” 15A95 6 1/8” 5 1/8” 3 5/8” 9/16” 1 15/32” 2.1172” 2.19” 1/2”
RCJT 1 7/16” 1 7/16” 15A95 6 1/8” 5 1/8” 3 1/8” 9/16” 1 15/32” 2.1772” 2.19” 1/2”
RCJT 1 1/2” 1 1/2” 16A85 6 3/4” 5 21/32” 4 1/8” 9/16” 1 17/32” 2.3740” 2.37” 1/2”
RCJT 1 5/8” 1 5/8” 24A55 7 1/16” 5 27/32” 4 3/8” 9/16” 1 3/4” 2.3740” 2.50” 9/16”
RCJT 1 3/4” 1 3/4” 25A95 7 1/16” 5 27/32” 4 3/8” 9/16” 1 3/4” 2.3740” 2.50” 9/16”
RCJT 1 7/8” 1 7/8” 25A95 7 7/16” 6 3/16” 4 9/16” 9/16” 1 27/32” 2.6811” 2.75” 9/16”
RCJT 1 15/16” 1 15/16” 25A95 7 7/16” 6 3/16” 4 9/16” 9/16” 1 27/32” 2.6811” 2.75” 9/16”
RCJT 2-2R”** 2” 27A90 7 7/16” 6 3/16” 4 9/16” 9/16” 1 27/32” 2.6811” 2.75” 9/16”
RCJT 2” 2” 33A90 8 1/2” 7 1/4’ 5 1/4” 13/16” 1 31/32” 3.0315” 3.00” 9/16”
RCJT 2 3/16” 2 3/16” 33A90 8 1/2” 71/4” 5 1/4” 13/16” 1 31/32” 3.0315” 3.00” 9/16”
IMP
OR
T & D
OM
ESTIC
MO
UN
TED U
NITS
PAGE 34 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
AMERICAN Mounted UnitsPillow Blocks • 2- and 4-Bolt Flanges • Made with Fafnir/Timken® Inserts with Domestic Housings
Housings are the Same Without the BCA or Fafnir Logo
Pillow Blocks
Part # and Bore Size Ref. No.
RAK 3/4” USA 37A52
RAK 7/8” USA 39A99
RAK 1” USA 39A99
RAK 1-1/8” USA 47A91
RAK 1-3/16” USA 48A15
RAK 1-1/4” 2R USA* 48A15
RAK 1-1/4” USA 55A54
RAK 1-3/8” USA 55A54
RAK 1-7/16” USA 56A54
RAK 1-1/2” USA 60A53
RAK 1-3/4” USA 72A90
RAK 1-15/16” USA 64A51
RAK 2” USA 94A35
RAK 2-3/16” USA 98A14
RAK 2-7/16” USA 119A37
For dimensions see page XX.
2-Bolt Flange
Part # and Bore Size Ref. No.
RCJT 3/4” USA 37A52
RCJT 7/8” USA 42A67
RCJT 1” USA 39A99
RCJT 1-1/8” USA 47A91
RCJT 1-3/16” USA 48A15
RCJT 1-1/4” 2R USA* 48A15
RCJT 1-1/4” USA 55A54
RCJT 1-3/8” USA 56A55
RCJT 1-7/16” USA 56A55
RCJT 1-1/2” USA 60A53
For dimensions see page XX.
4-Bolt Flange
Part # and Bore Size Ref. No.
RCJ 3/4” USA 37A52
RCJ 7/8” USA 48A50
RCJ 1” USA 39A98
RCJ 1-1/8” USA 48A14
RCJ 1-3/16” USA 47A99
RCJ 1-1/4” 2R USA* 47A99
RCJ 1-1/4” USA 56A55
RCJ 1-3/8” USA 56A55
RCJ 1-7/16” USA 56A55
RCJ 1-1/2” USA 60A53
RCJ 1-3/4” USA 72A90
RCJ 1-15/16” USA 64A51
RCJ 2” USA 98A12
RCJ 2-3/16” USA 98A12
RCJ 2-7/16” USA 119A37
For dimensions see page XX.
We stock up to 2-7/16” on ALL mounted units. Ask your Agri
Industrial customer service rep about sizes not listed.
IMP
OR
T &
DO
MES
TIC
MO
UN
TED
UN
ITS
Call Toll Free 1-800-457-5348 PAGE 35AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Medium Duty BearingsInsert Bearings, Pillow Blocks, and Flanges with Set Screw Locking • Import
Part #& Bore Ref. No. Bore Hole
CenterCenter Height Bolt Size
UCPX 1” 23A45 4-11/16” 1-3/4” 1/2”
UCPX 1-1/8” 25A22 5” 1-7/8” 1/2”
UCPX 1-3/16” 25A22 5” 1-7/8” 1/2”
UCPX 1-1/4” 26A70 5-21/32” 2-1/8” 1/2”
UCPX 1-3/8” 26A70 5-21/32” 2-1/8” 1/2”
UCPX 1-7/16” 26A70 5-21/32” 2-1/8” 1/2”
UCPX 1-1/2” 38A20 6-5/32” 2-5/16” 5/8”
UCPX 1-15/16” 41A55 6-5/32” 2-1/2” 5/8”
UCPX 2-3/16” 55A65 7-1/4” 2-3/4” 3/4”
UCPX 2-7/16” 79A20 8” 3” 3/4”
Part #& Bore Ref. No. Bore Hole
CenterCenter Height Bolt Size
UCFX 1” 23A45 3-1/4” 4-1/4” 3/8”
UCFX 1-1/8” 25A22 3-5/8” 4-19/32” 7/16”
UCFX 1-3/16” 25A22 3-5/8” 4-19/32” 7/16”
UCFX 1-1/4” 26A70 4” 5-1/8” 1/2”
UCFX 1-3/8” 26A70 4” 5-1/8” 1/2”
UCFX 1-7/16” 26A70 4” 5-1/8” 1/2”
UCFX 1-1/2” 38A20 4-1/8” 5-3/8” 1/2”
UCFX 1-15/16” 41A55 5-1/8” 6-3/8” 5/8”
UCFX 2-3/16” 55A65 5-5/8” 6-7/8” 5/8”
UCFX 2-7/16” 79A20 5-7/8” 7-3/8” 5/8”
Medium Duty Pillow Blocks 4 Bolt Flanges
Insert Bearings
Part # Ref. No. A B C DUCX-100 15A10 1” 2.4409”/62mm 1.50” 0.7087”
UCX-102 19A70 1-1/8” 2.8346”/72mm 1.689” 0.7480”
UCX-103 19A70 1-3/16” 2.8346”/72mm 1.689” 0.7480”
UCX-104 22A45 1-1/4” 3.1496”/80mm 1.937” 0.8661”
UCX-106 22A45 1-3/8” 3.1496”/80mm 1.937” 0.8661”
UCX-107 22A45 1-7/16” 3.1496”/80mm 1.937” 0.8661”
UCX-108 25A55 1-1/2” 3.3465”/85mm 1.937” 0.8661”
UCX-115 28A90 1-15/16” 3.9370”/100mm 2.1890” 0.9843”
UCX-203 36A55 2-3/16” 4.3307”/110mm 2.536” 1.063”
UCX-207 68A40 2-7/16” 4.7244”/120mm 2.536” 1.063”
Other sizes available upon request.
IMP
OR
T & D
OM
ESTIC
MO
UN
TED U
NITS
PAGE 36 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Housing and Collars OnlyPillow Blocks, 2-Bolt, and 4-Bolt Cast Iron Flanges and Eccentric Locking Collars
Pillow Block Part # 2-Bolt Flange Part # 4-Bolt Flange Part # Housing No. To fi t bearing shaft size Ref. No.
RAK 40mm-USA RCJT 40mm-USA RCJ 40mm-USA 203 1/2”, 5/8” 12A50
RAK 47mm-USA RCJT 47mm-USA RCJ 47mm-USA 204 3/4” 12A50
RAK 52mm-USA RCJT 52mm-USA RCJ 52mm-USA 205 7/8”, 15/16”, 1” 13A90
RAK 62mm-USA RCJT 62mm-USA RCJ 62mm-USA 206 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4” * 16A10
RAK 72mm-USA RCJT 72mm-USA RCJ 72mm-USA 207 1-1/4”, 1-3/8”, 1-7/16” 17A25
RAK 80mm-USA RCJT 80mm-USA RCJ 80mm-USA 208 1-1/2”, 1-9/16” 21A50
RAK 85mm-USA RCJT 85mm-USA RCJ 85mm-USA 209 1-5/8”, 1-3/4” 26A26
RAK 90mm-USA RCJT 90mm-USA RCJ 90mm-USA 210 1-7/8”, 1-15/16”, 2”** 27A22
RAK 100mm-USA RCJT 100mm-USA RCJ 100mm-USA 211 2”, 2-1/8”, 2-3/16” 34A55
RAK 110mm-USA RCJT 110mm-USA RCJ 110mm-USA 212 2-1/4”, 2-3/8”, 2-7/16” 43A27
Domestic Bearing Housings
Part # Ref. No. Fits bearing size Part # Ref. No. Fits bearing size Part # Ref. No. Fits bearing size
S008 1A10 1/2” S103-2* 1A65 1-1/4” S112 3A50 1-3/4”
S010 1A15 5/8” S104 2A40 1-1/4” S114 3A95 1-7/8”
S012 1A35 3/4” S106 2A40 1-3/8” S115 3A95 1-15/16”
S014 1A35 7/8” S107 2A40 1-7/16” S115-2** 3A95 2”
S015 1A35 15/16” S108 2A75 1-1/2” S200 4A50 2”
S100 1A65 1” S109 3A30 1-9/16” S203 4A50 2-3/16”
S102 1A65 1-1/8” S110 3A30 1-5/8” S207 2-7/16”
S103 1A65 1-3/16” S111 3A50 1-11/16” 5A70
Import Eccentric Locking Collars
*206 Outer **210 Outer
Pillow Block Part # 2-Bolt Flange Part # 4-Bolt Flange Part # Housing No. To fi t bearing shaft size Ref. No.
RAK 40mm RCJT 40mm RCJ 40mm 203 1/2”, 5/8” 4A50
RAK 47mm RCJT 47mm RCJ 47mm 204 3/4” 4A95
RAK 52mm RCJT 52mm RCJ 52mm 205 7/8”, 15/16”, 1” 5A95
RAK 62mm RCJT 62mm RCJ 62mm 206 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4” * 6A75
RAK 72mm RCJT 72mm RCJ 72mm 207 1-1/4”, 1-3/8”, 1-7/16” 7A75
RAK 80mm RCJT 80mm RCJ 80mm 208 1-1/2”, 1-9/16” 9A35
RAK 85mm RCJT 85mm RCJ 85mm 209 1-5/8”, 1-3/4” 11.29
RAK 90mm RCJT 90mm RCJ 90mm 210 1-7/8”, 1-15/16”, 2”** 12.95
RAK 100mm RCJT 100mm RCJ 100mm 211 2”, 2-1/8”, 2-3/16” 15A99
RAK 110mm RCJT 110mm RCJ 110mm 212 2-1/4”, 2-3/8”, 2-7/16” 18A88
RAK 120mm RCJ 120mm 213 2-1/2”, 2-9/16” 26.51
RAK 125mm RCJ 125mm 214 2-5/8”, 2-11/16”, 2-3/4” 27.00
RAK 130mm RCJ 130mm 215 2-7/8”, 2-15/16”, 3” 27.55
Import Housings
*206 Outer **210 Outer
IMP
OR
T &
DO
MES
TIC
MO
UN
TED
UN
ITS
Call Toll Free 1-800-457-5348 PAGE 37AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Light Duty Cast Iron Flange UnitsMounted Units with Eccentric Locking Collar
Ductile High Tensile Strength Economical Units with Minimal Mounting Space • Import
Part # and Shaft Diameter Bore Size Ref. No. A B C D E F Bolt Size
2BF10 5/8” 8A95 2-1/2” 3-3/16” 1-15/16” 3/8” 1.2283” 1.13” 1/4”
2BF12 3/4” 9A85 2-13/16” 3-9/16” 2-1/4” 7/16” 1.3622” 1.26” 5/16”
2BF14 7/8” 11A75 3” 3-3/4” 2-1/2” 7/16” 1.3622” 1.50” 5/16”
2BF16 1” 11A75 3” 3-3/4” 2-1/2” 7/16” 1.3622” 1.50” 5/16”
2BF18 1-1/8” 13A40 3-9/16” 4-7/16” 3-3/32” 15/32” 1.5276” 1.75” 3/8”
2BF19 1-3/16” 13A40 3-9/16” 4-7/16” 3-3/32” 15/32” 1.5276” 1.75” 3/8”
2BF20-R* 1-1/4” 13A40 3-9/16” 4-7/16” 3-3/32” 15/32” 1.5276” 1.75” 3/8”
2BF20 1-1/4” 15A55 3-15/16” 4-13/16” 4-13/16” 1/2” 1.6575” 2.19” 3/8”
2BF22 1-3/8” 15A55 3-15/16” 4-13/16” 4-13/16” 1/2” 1.6575” 2.19” 3/8”
2BF23 1-7/16” 15A55 3-15/16” 4-13/16” 4-13/16” 1/2” 1.6575” 2.19” 3/8”
* 206 Outer For regreasable bearings, add $1.25 to price and add “G” to the Part #. (Example: 2BF16G)2-bolt fl anges available in thick sizes
2-Bolt Cast Iron Flange Unit
Part # and Shaft Diameter Bore Size Ref. No. A B C D E F Bolt Size
3BF10 5/8” 8A95 3-3/16” 2-1/2” 1-19/32” 13-32” 1.23” 1.13” 1/4”
3BF12 3/4” 9A85 3-9/16” 2-13/16” 1-25-32” 7/16” 1.36” 1.26” 5/16”
3BF14 7/8” 11A75 3-3/4” 3” 1-7/8” 1/2” 1.36” 1.50” 5/16”
3BF16 1” 11A75 3-3/4” 3” 1-7/8” 1/2” 1.36” 1.50” 5/16”
3BF18 1-1/8” 13A40 4-9/16” 3-9/16” 2-9/32” 19/32” 1.49” 1.75” 3/8”
3BF19 1-3/16” 13A40 4-9/16” 3-9/16” 2-9/32” 19/32” 1.49” 1.75” 3/8”
3BF20-R* 1-1/4” 13A40 4-9/16” 3-9/16” 2-9/32” 19/32” 1.49” 1.75” 3/8”
3BF20 1-1/4” 15A55 4-13/16” 3-15/16” 2-13/32” 19/32” 1.66” 2.19” 3/8”
3BF22 1-3/8” 15A55 4-13/16” 3-15/16” 2-13/32” 19/32” 1.66” 2.19” 3/8”
3BF23 1-7/16” 15A55 4-13/16” 3-15/16” 2-13/32” 19/32” 1.66” 2.19” 3/8”
* 206 Outer For regreasable bearings, add $1.25 to price and add “G” to the Part #. (Example: 2BF16G)
3-Bolt Cast Iron Flange Unit
IMP
OR
T & D
OM
ESTIC
MO
UN
TED U
NITS
PAGE 38 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Bearing InsertsNarrow or Wide Inner Ring with Eccentric Locking Collars • Import
Part # Ref. No. Bore Size A. B. C.
G1008KRRB 4A95 1/2” 1.5748”/40mm 1.47” 0.512”
G1010KRRB 4A95 5/8” 1.8504”/47mm 1.71” 0.591”
G1012KRRB 5A55 3/4” 1.8504”/47mm 1.71” 0.591”
G1014KRRB 6A85 7/8” 2.0472”/52mm 1.74” 0.591”
G1015KRRB 6A85 15/16” 2.0472”/52mm 1.74” 0.591”
G1100KRRB 6A85 1” 2.0472”/52mm 1.74” 0.591”
G1101KRRB 8A25 1-1/16” 2.4409”/62mm 1.90” 0.709”
G1102KRRB 8A25 1-1/8” 2.4409”/62mm 1.90” 0.709”
G1103KRRB 8A25 1-3/16” 2.4409”/62mm 1.90” 0.709”
G1103KRRB-2* 8A25 1-1/4” 2.4409”/62mm 1.90” 0.709”
G1104KRRB 9A94 1-1/4” 2.8346”/72mm 2.01” 0.748”
G1105KRRB 11A95 1-5/16” 2.8346”/72mm 2.01” 0.748”
G1106KRRB 9A94 1-3/8” 2.8346”/72mm 2.01” 0.748”
G1107KRRB 9A94 1-7/16” 2.8346”/72mm 2.01” 0.748”
G1108KRRB 10A65 1-1/2” 3.1496”/80mm 2.22” 0.866”
G1109KRRB 14A90 1-9/16” 3.1496”/80mm 2.22” 0.866”
G1110KRRB 15A91 1-5/8” 3.3465”/85mm 2.22” 0.866”
G1111KRRB 15A91 1-11/16” 3.3465”/85mm 2.22” 0.866”
G1112KRRB 15A91 1-3/4” 3.3465”/85mm 2.22” 0.866”
G1114KRRB 16A45 1-7/8” 3.5433”/90mm 2.47” 0.866”
G1115KRRB 16A45 1-15/16” 3.5433”/90mm 2.47” 0.866”
G1115KRRB-2** 19A95 2” 3.5433”/90mm 2.47” 0.866”
G1115KRRB-3*** 24.50 1-15/16” 3.5433”/90mm 2.47” 0.866”
G1200KRRB 23A50 2” 3.9370”/100mm 2.81” 0.984”
G1202KRRB 25A35 2-1/8” 3.9370”/100mm 2.81” 0.984”
G1203KRRB 23A50 2-3/16” 3.9370”/100mm 2.81” 0.984”
G1204KRRB 27A55 2-1/4” 4.3307”/110mm 3.06” 1.0636”
G1206KRRB 32A70 2-3/8” 4.3307”/110mm 3.06” 1.063”
G1207KRRB 32A70 2-7/16” 4.3307”/110mm 3.06” 1.063”
G1208KRRB 42A55 2-1/2” 4.7244”/120mm 3.37” 1.063”
G1215KRRB 39A90 2-15/16” 5.1181”/130mm 3.63” 1.181”
G1300KRRB 39A90 3” 5.1181”/130mm 3.63” 1.181”
Wide Inner Ring with Eccentric Locking Collar
• Relubricatable
• Spherical O.D.
• Self aligning
*206 Outer **210 Outer ***Triple Lip Seal
IMP
OR
T &
DO
MES
TIC
MO
UN
TED
UN
ITS
Call Toll Free 1-800-457-5348 PAGE 39AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Adapter Bearings Wide Inner Ring • Dual Set Screw Locking • Relubricatable • Spherical O.D. • Self-Aligning • Import
Part # Ref. No. Bore Size A. Length B. Inner Ring C. Outer Ring D.
UC-010 6A95 5/8” 47mm (1.8504”) 1.220” 0.590” 1.130”
UC-012 5A40 3/4” 47mm (1.8504”) 1.220” 0.590” 1.130”
UC-014 6A55 7/8” 52mm (2.047”) 1.338” 0.590” 1.327”
UC-015 6A55 15/16” 52mm (2.047”) 1.338” 0.590” 1.327”
UC-100 6A55 1” 52mm (2.047”) 1.338” 0.590” 1.327”
UC-102 8A25 1-1/8” 62mm (2.440”) 1.500” 0.708” 1.567”
UC-103 8A25 1-3/16” 62mm (2.440”) 1.500” 0.708” 1.567”
UC-103-2* 8A25 1-1/4” 62mm (2.440”) 1.500” 0.708” 1.567”
UC-104 9A99 1-1/4” 72mm (2.834”) 1.689” 0.748” 1.843”
UC-105 10A15 1-5/16” 72mm (2.834”) 1.689” 0.748” 1.843”
UC-106 9A99 1-3/8” 72mm (2.834”) 1.689” 0.748” 1.843”
UC-107 9A99 1-7/16” 72mm (2.834”) 1.689” 0.748” 1.843”
UC-108 11A65 1-1/2” 80mm (3.149”) 1.937” 0.866” 2.067”
UC-110 14A55 1-5/8” 85mm (3.346”) 1.937” 0.866” 2.256”
UC-111 14A55 1-11/16” 85mm (3.346”) 1.937” 0.866” 2.256”
UC-112 14A55 1-3/4” 85mm (3.346”) 1.937” 0.866” 2.256”
UC-114 15A95 1-7/8” 90mm (3.543”) 2.031” 0.866” 2.455”
UC-115 15A95 1-15/16” 90mm (3.543”) 2.031” 0.866” 2.455”
UC-115-2** 22A25 2” 90mm (3.543”) 2.031” 0.866” 2.455”
UC-200 22A90 2” 100mm (3.937”) 2.189” 0.984” 2.756”
UC-202 31A70 2-1/8” 100mm (3.937”) 2.189” 0.984” 2.756”
UC-203 22A25 2-3/16” 100mm (3.937”) 2.189” 0.984” 2.756”
UC-204 31A70 2-1/4” 110mm (4.330”) 2.563” 1.063” 3.031”
UC-206 31A70 2-3/8” 110mm (4.330”) 2.563” 1.063” 3.031”
UC-207 31A70 2-7/16” 110mm (4.330”) 2.563” 1.063” 3.031”
UC-208 35A60 2-1/2” 120mm (4.724”) 2.563” 1.063” 3.232”
UC-275 39A90 2-3/4” 125mm (4.921”) 2.937” 1.141” 3.425”
UC-215 43A20 2-15/16” 130mm (5.118”) 3.063” 1.181” 3.602”
UC-300 44A90 3” 130mm (5.118”) 3.063” 1.181” 3.602”
*206 Outer **210 Outer
IMP
OR
T & D
OM
ESTIC
MO
UN
TED U
NITS
PAGE 40 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Adapter BearingsNarrow Inner Ring • Relubricatable & Pre-lubricatable
with Eccentric Locking Collar Spherical O.D. • Self-Aligning • Import
Our Adapter Bearings Are NOT Manufactured in China!
PRERELUBRICATABLE RELUBRICATABLE
Part # Ref. No. Part # Ref. No.Dimensions
A. Bore Size. B. mm (in) C D
RA008PPB 3A95 GRA008PPB 4A75 1/2” 40mm (1.5748”) 0.5118” 1.13”
RA010PPB 3A95 GRA010PPB 4A75 5/8” 40mm (1.5748”) 0.5118” 1.13”
RA012PPB 4A20 GRA012PPB 4A75 3/4” 47mm (1.8504”) 0.5906” 1.22”
RA014PPB 4A20 GRA014PPB 4A75 7/8” 52mm (2.0472”) 0.5906” 1.22”
RA015PPB 4A85 GRA015PPB 4A95 15/16” 52mm (2.0472”) 0.5906” 1.22”
RA100PPB 4A85 GRA100PPB 4A80 1” 52mm (2.0472”) 0.5906” 1.22”
RA101PPB 4A65 GRA101PPB 7A95 1-1/16” 62mm (2.4409”) 0.7087” 1.41”
RA102PPB 7A85 GRA102PPB 6A95 1-1/8” 62mm (2.4409”) 0.7087” 1.41”
RA103PPB 6A75 GRA103PPB 6A95 1-3/16” 62mm (2.4409”) 0.7087” 1.41”
RA103PPB-2* 6A75 GRA103PPB-2* 6A95 1-1/4” 62mm (2.4409”) 0.7087” 1.41”
RA104PPB 6A75 GRA104PPB 9A25 1-1/4” 72mm (2.8346”) 0.7480” 1.41”
105PPBRA 8A25 G105PPBRA 9A25 1-5/16” 72mm (2.8346”) 0.7480” 1.53”
RA106PPB 8A25 GRA106PPB 9A25 1-3/8” 72mm (2.8346”) 0.7480” 1.53”
RA107PPB 8A25 GRA107PPB 9A25 1-7/16” 72mm (2.8346”) 0.7480” 1.53”
RA108PPB 9A55 GRA108PPB 9A85 1-1/2” 80mm (3.1496”) 0.8661” 1.72”
RA110PPB 13A10 1-5/8” 85mm (3.3465”) 0.8661” 1.72”
RA111PPB 15A55 1-11/16” 85mm (3.3465”) 0.8661” 1.72”
RA112PPB 15A55 GRA112PPB 15A95 1-3/4” 85mm (3.3465”) 0.8661” 1.72”
RA114PPB 18A95 1-7/8” 90mm (3.5433”) 0.8661” 1.72”
RA115PPB 16A50 GRA115PPB 17A35 1-15/16” 90mm (3.5433”) 0.8661” 1.72”
RA115PPB-2** 17A78 GRA115PPB-2** 17A35 2” 90mm (3.5433”) 0.8661” 1.72”
RA200PPB 19A98 GRA200PPB 21A55 2” 100mm (3.9370”) 0.9843” 1.91”
*206 Outer **210 Outer
IMP
OR
T &
DO
MES
TIC
MO
UN
TED
UN
ITS
Call Toll Free 1-800-457-5348 PAGE 41AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Adapter BearingsRelubricatable & Pre-lubricated with Eccentric Locking Collar • Cylindrical O.D. • Import
Our Adapter Bearings Are NOT Manufactured in China!
*206 Outer
Part # Ref. No. A. Bore Size B. Length C. D.
RA010PP 4A15 5/8” 40mm (1.5748”) 0.5118” 1.13”
RA012PP 4A25 3/4” 47mm (1.8504”) 0.5906” 1.22”
RA014PP 4A75 7/8” 52mm (2.0472”) 0.5906” 1.22”
RA100PP 4A75 1” 52mm (2.0472”) 0.5906” 1.22”
RA101PP 4A85 1-1/16” 62mm (2.4409”) 0.7087” 1.41”
RA102PP 4A85 1-1/8” 62mm (2.4409”) 0.7087” 1.41”
RA103PP 4A85 1-3/16” 62mm (2.4409”) 0.7087” 1.41”
RA103PP-2* 4A85 1-1/4” 62mm (2.4409”) 0.7087” 1.41”
RA104PP 9A90 1-1/4” 72mm (2.8346”) 0.7480” 1.53”
RA106PP 9A90 1-3/8” 72mm (2.8346”) 0.7480” 1.53”
RA107PP 9A90 1-7/16” 72mm (2.8346”) 0.7480” 1.53”
RA108PP 12A20 1-1/2” 80mm (3.1496”) 0.8661” 1.72”
RA112PP 16A55 1-3/4” 80mm (3.1496”) 0.8661” 1.72”
IMP
OR
T & D
OM
ESTIC
MO
UN
TED U
NITS
PAGE 42 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Adapter Bearings Prelubricated • Spherical O.D. • Self-Aligning • Set Screw Locking
Our Adapter Bearings Are NOT Manufactured in China!
Part # Ref. No. Bore Size A B C D
SB-010-RRB 4A20 5/8” 1.5748” 0.8858” 0.5118” 0.969”
SB-012-RRB 4A20 3/4” 1.8504” 0.9843” 0.5906” 1.130”
SB-014-RRB 4A25 7/8” 2.0472” 1.0630” 0.5906” 1.327”
SB-100-RRB 4A25 1” 2.0472” 1.0630” 0.5906” 1.327”
SB-102-RRB 5A95 1-1/8” 2.4409” 1.1811” 0.7087” 1.567”
SB-103-RRB 5A95 1-3/16” 2.4409” 1.1811” 0.7087” 1.567”
SB-103-RRB-2 5A95 1-1/4” 2.4409” 1.1811” 0.7087” 1.567”
SB-104-RRB 7A65 1-1/4” 2.8346” 1.2598” 0.7480” 1.843”
SB-106-RRB 7A65 1-3/8” 2.8346” 1.2598” 0.7480” 1.843”
SB-107-RRB 7A65 1-7/16” 2.8346” 1.2598” 0.7480” 1.843”
SB-108-RRB 9A90 1-1/2” 3.1496” 1.345” 0.8661” 2.067”
NARROW INNER RING • DUAL SET SCREW LOCKING TYPE
NARROW INNER RING INSERT BEARING WITH LOCKING COLLAR • METRIC • IMPORT
Part # Ref. No. Bore Size A. Outside Diameter B.Total Width with Collar C. Inner Ring Width
RA20MMPPB 8A04 20mm 47mm 31mm 15mm
RA25MMPPB 8A36 25mm 52mm 31mm 15mm
RA30MMPPB 10A77 30mm 62mm 35.7mm 8mm
RA35MMPPB 17A65 35mm 72mm 38.9mm 19mm
RA40MMPPB 18A95 40mm 80mm 43.7mm 22mm
WIDE INNER RING • DUAL SET SCREW LOCKING TYPE • METRIC • IMPORT
Part # Ref. No. Bore Size A. Outside Diameter B.Total Width with Collar C. Inner Ring Width
UC-25mm 7A45 25mm 52mm 34mm 15mm
UC-30mm 9A24 30mm 62mm 38mm 18mm
UC-35mm 10A99 35mm 72mm 42mm 19mm
UC-40mm 12A99 40mm 80mm 49.2mm 22mm
UC-45mm 15A96 45mm 85mm 49.2mm 22mm
UC-50mm 17A75 50mm 90mm 51.6mm 22mm
For applications where an eccentric locking collar will not work.Same as Fafnir YA-RRB series, same as BCA® NSPS-RR series.
IMP
OR
T &
DO
MES
TIC
MO
UN
TED
UN
ITS
Call Toll Free 1-800-457-5348 PAGE 43AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
AMERICAN Adapter BearingsWide Inner Ring • Spherical • Relubricatable with Eccentric Locking Collar • Triple Lip Seal Available in Most Sizes
RELUBRICATABLE PRE-LUBE
Part # Ref. No. Part # Ref. No.Dimensions
A. B. mm (in) C. mm (in) D.
G1010KRRB AG 21A50 1010KRRB AG 17A70 5/8” 40mm (1.5478”) 12mm (0.472”) 1-15/32”
G1012KRRB AG 17A54 1012KRRB AG 25A31 3/4” 47mm (1.8504”) 15mm (0.5906”) 1-27/32”
G1014KRRB AG 26A65 1014KRRB AG 32A83 7/8” 52mm (2.0472”) 15mm (0.5906”) 1-3/4”
G1015KRRB AG 28A65 1015KRRB AG 33A61 15/16” 52mm (2.0472”) 15mm (0.5906”) 1-3/4”
G1100KRRB AG 15A25 1100KRRB AG 15A85 1” 52mm (2.0472”) 15mm (0.5906”) 1-3/4”
G1101KRRB AG 61A54 1-1/16” 52mm (2.0472”) 15mm (0.5906”) 1-29/32”
G1102KRRB AG 27A99 1102KRRB AG 31A55 1-1/8” 62mm (2.4409”) 18mm (0.7087”) 1-29/32”
G1103KRRB AG* 32A50 1103KRRB AG 19A74 1-3/16” 62mm (2.4409”) 18mm (0.7087”) 1-29/32”
G1103KRRB3 AG 20A99 1103KRRB AG 22A85 1-1/4” 62mm (2.4409”) 18mm (0.7087”) 1-29/32”
G1104KRRB AG 26A90 1104KRRB AG 28.90 1-1/4” 62mm (2.4409”) 18mm (0.7087”) 2-1/64”
G1105KRRB AG 29A80 1-5/16” 72mm (2.8346”) 19mm (0.7480”) 2-1/64”
G1106KRRB AG 26A75 1106KRRB AG 34A80 1-3/8” 72mm (2.8346”) 19mm (0.7480”) 2-1/64”
G1107KRRB AG 27A40 1107KRRB AG 29A60 1-7/16” 72mm (2.8346”) 19mm (0.7480”) 2-1/64”
G1108KRRB AG 28A50 1108KRRB AG 34A04 1-1/2” 80mm (3.1496”) 22mm (0.8661”) 2-7/32”
G1109KRRB AG 62A63 1109KRRB AG 1-9/16” 80mm (3.1496”) 22mm (0.8661”) 2-7/32”
G1110KRRB AG 43A50 1110KRRB AG 49A48 1-5/8” 85mm (3.3465”) 22mm (0.8661”) 2-7/32”
G1111KRRB AG 44A55 1-11/16” 85mm (3.3465”) 22mm (0.8661”) 2-7/32”
G1112KRRB AG 34A25 1112KRRB AG 54A90 1-3/4” 85mm (3.3465”) 22mm (0.8661”) 2-7/32”
G1114KRRB AG 59A56 1-7/8” 90mm (3.5433”) 22mm (0.8661”) 2-15/32”
G1115KRRB AG 37A75 1115KRRB AG 52A14 1-15/16” 90mm (3.5433”) 22mm (0.8661”) 2-15/32”
G1200KRRB AG 52A50 1200KRRB AG 98A01 2” 100mm (3.9370”) 25mm (0.9843”) 2-13/16”
G1203KRRB AG 64A50 1203KRRB AG 62A99 2-3/16” 100mm (3.9370”) 25mm (0.9843”) 2-13/16”
G1203KRRB AG 4** 99A98 1203KRRB 4 AG 77A29 2-3/16” 100mm (3.9370”) 21mm (08268”) 2-13/16”
G1207KRRB AG 98A43 1207KRRB AG 143A10 2-3/16” 110mm (4.3307”) 27mm (1.0630”) 3-1/16”
G1215KRRB AG 244A53 2-15/16” 130mm (5.1181”) 27mm (1.142”) 3-5/8”
*206 Outer **Pregreased and Triple Lip Seal FAFNIF-TIMKEN BRANDS ALL MADE WITH USA COMPONENT PARTS
IMP
OR
T & D
OM
ESTIC
MO
UN
TED U
NITS
PAGE 44 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
AMERICAN Adapter Bearings
Part # Ref. No. Bore Size Part # Ref. No. Bore Size
1012KRR AG 25A50 3/4” 1107KRR 40.55 1-7/16”
1014KRR AG 29A97 7/8” 1108KRR 42.59 1-1/2”
1015KRR AG 48A20 15/16” 1110KRR 54A55 1-5/8”
1100KRR AG 21A98 1” 1112KRR 51.24 1-3/4”
1102KRR AG 35A55 1-1/8” 1114KRR 60.82 1-7/8”
1103KRR AG 36A80 1-3/16” 1115KRR 65.17 1-15/16”
1103KRR3* AG 36.80 1-1/4” 1200KRR 71.50 2”
1104KRR AG 43A70 1-1/4” 1203KRR 73.05 2-3/16”
1106KRR AG 42A80 1-3/8” 1207KRR $140.30 2-7/16”
Flat OD Type Wide Inner Ring • MADE IN USA
The Heavy Series wide inner ring bearings made by Timken® will withstand continuous or shock loads — used in many cotton gin applications. Spherical and relubricatable with eccentric locking collar.
Cylindrical and pre-lubed with eccentric locking collar. Same dimensions as G1100 series type.
GN-KRRB Heavy Series • MADE IN USA
Part # Ref. No. A. Bore B. Outside Dia. mm (in) C. Outer Ring D. Overall Length
GN104KRRB 52A87 1-1/4” 80mm (3.1496”) 0.866” 2-1/32”
GN106KRRB 66A06 1-3/8” 80mm (3.1496”) 0.866” 2-1/32”
GN107KRRB 52A87 1-7/16” 80mm (3.1496”) 0.866” 2-1/32”
GN108KRRB 66A94 1-1/2” 90mm (3.5433”) 0.984” 2-1/4”
GN110KRRB 79A66 1-5/8” 100mm (3.9370”) 1.063” 2-5/16”
GN111KRRB 79A66 1-11/16” 100mm (3.9370”) 1.063” 2-5/16”
GN112KRRB 97A99 1-3/4” 100mm (3.9370”) 1.063” 2-5/16”
GN115KRRB 88A69 1-15/16” 110mm (4.3307”) 1.142” 2-5/8”
GN200KRRB 333A47 2” 120mm (4.7244”) 1.205” 2-7/8”
GN203KRRB 124A86 2-3/16” 120mm (4.7244”) 1.220” 2-7/8”
GN207KRRB 269A63 2-7/16” 130mm (5.1181”) 1.299” 3-1/4”
GN215KRRB 539A47 2-15/16” 160mm (6.2992”) 1.535” 3-15/16”
*206 Outer
IMP
OR
T &
DO
MES
TIC
MO
UN
TED
UN
ITS
Call Toll Free 1-800-457-5348 PAGE 45AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
AMERICAN Adapter Bearings Narrow Inner Ring • Relubricatable & Pre-lubricated with Eccentric Locking Collar • Spherical & Cylindrical
Made by Timken®
PRERELUBRICATABLE RELUBRICATABLE
Part # Ref. No. Part # Ref. No. A. Bore. B. in (mm) C D
RA008-RRB AG 15A60 GRA008-RRB AG 25.31 1/2” 1.5748” (40mm) 0.512” 1-1/8”
RA010-RRB-AG 12A15 GRA010-RRB-AG 15A45 5/8” 1.5748” (40mm) 0.512” 1-1/8”
RA012-RRB-AG 12A80 GRA012-RRB-AG 13A65 3/4” 1.8504” (47mm) 0.591” 1-7/32”
RA014-RRB-AG 10A28 GRA014-RRB-AG 15A55 7/8” 2.0472” (52mm) 0.591” 1-7/32”
RA015-RRB-AG 12A62 GRA015-RRB-AG 28A82 15/16” 2.0472” (52mm) 0.591” 1-7/32”
RA100-RRB-AG 9A56 GRA100-RRB-AG $10.75 1” 2.0472” (52mm) 0.591” 1-7/32”
RA101-RRB-AG 20A88 1-1/16” 2.4409” (62mm) 0.709” 1-13/32”
RA102-RRB-AG 14A13 GRA102-RRB-AG 15A75 1-1/8” 2.4409” (62mm) 0.709” 1-13/32”
RA103-RRB-AG 13A57 GRA103-RRB-AG $15.75 1-3/16” 2.4409” (62mm) 0.709” 1-13/32”
RA103-RRB2-AG* 14A26 GRA103-RRB2-AG* $15.75 1-1/4” 2.4409” (62mm) 0.709” 1-13/32”
RA104-RRB-AG 18A99 GRA104-RRB-AG $23.50 1-1/4” 2.8346” (72mm) 0.748” 1-17/32”
RA106-RRB-AG 22A57 GRA106-RRB-AG $23.50 1-3/8” 2.8346” (72mm) 0.748” 1-17/32”
RA107-RRB-AG 27A53 GRA107-RRB-AG $23.50 1-7/16” 2.8346” (72mm) 0.748” 1-17/32”
RA108-RRB-AG 24A15 GRA108-RRB-AG $37.59 1-1/2” 3.1496” (80mm) 0.866” 1-23/32”
RA110-RRB-AG 42A55 1-5/8” 3.3465” (85mm) 0.866” 1-23/32”
RA111-RRB-AG 37A45 GRA111-RRB-AG $37.59 1-11/16” 3.3465” (85mm) 0.866” 1-23/32”
RA112-RRB-AG 32A99 GRA112-RRB-AG $44.50 1-3/4” 3.3465” (85mm) 0.866” 1-23/32”
RA115-RRB-AG 32A25 GRA115-RRB-AG $44.50 1-15/16” 3.5433” (90mm) 0.866” 1-23/32”
RA115-RRB2-AG** 43A55 GRA115-RRB2-AG** $56.24 2” 3.5433” (90mm) 0.866” 1-23/32”
RA200-RRB-AG 48A17 GRA200-RRB-AG 51.70 2” 3.937” (100mm) 0.945” 1-29/32”
RA203-RRB-AG 45A81 GRA203-RRB-AG 52.25 2-3/16” 3.937” (100mm) 0.945” 1-29/32”
Part # Ref. No. A. Bore. B. in (mm) C D
RA008-RR-AG 12A38 1/2” 1.5748” (40mm) 0.512” 1-1/8”
RA010-RR-AG 12A12 5/8” 1.5748” (40mm) 0.512” 1-1/8”
RA012-RR-AG 12A24 3/4” 1.8504” (47mm) 0.591” 1-7/32”
RA014-RR-AG 12A40 7/8” 2.0472” (52mm) 0.591” 1-7/32”
RA015-RR-AG 20A36 7/8” 2.0472” (52mm) 0.591” 1-7/32”
RA100-RR-AG 11A70 1” 2.0472” (52mm) 0.591” 1-7/32”
RA102-RR-AG 17A40 1-1/8” 2.4409” (62mm) 0.709” 1-13/32”
RA103-RR-AG 19A51 1-3/16” 2.4409” (62mm) 0.709” 1-13/32”
RA103-RR2-AG* 19A51 1-1/4” 2.4409” (62mm) 0.709” 1-13/32”
RA104-RR-AG 20A17 1-1/4” 2.8346” (72mm) 0.748” 1-17/32”
RA106-RR-AG 19A55 1-3/8” 2.8346” (72mm) 0.748” 1-17/32”
RA107-RR-AG 19A55 1-7/16” 2.8346” (72mm) 0.748” 1-17/32”
RA108-RR-AG 33A50 1-1/2” 3.1496” (80mm) 0.866” 1-23/32”
SP
HER
ICA
L O
R R
OU
ND
CY
LIN
DR
ICA
L O
R F
LAT
*206 Outer **210 Outer
IMP
OR
T & D
OM
ESTIC
MO
UN
TED U
NITS
PAGE 46 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
AMERICAN Adapter Bearings • MetricNarrow Inner Ring • Relubricatable & Pre-lubricated with Eccentric Locking Collar • Spherical & Cylindrical
Made by Timken®
CYLINDRICAL OR FLAT • PRE-LUBED
Part # Ref. No. A. Bore. B. in (mm) C D
RAE20RR 24A55 20mm 1.8504” (47mm) 0.591” 1-7/32”
RAE25RR 23A80 25mm 2.0472” (52mm) 0.591” 1-7/32”
RAE30RR 71A70 30mm 2.4409” (62mm) 0.709” 1-13/32”
RAE45RR 64A20 45mm 3.3465” (85mm) 0.866” 1-23/32”
PRERELUBRICATABLE PRE-LUBE
Part # Ref. No. Part # Ref. No. A. Bore. B. in (mm) C D
RAE20RRB 29A92 GRAE20RRB 32.05 20mm 1.8504” (47mm) 0.591” 1-7/32”
RAE25RRB 14A85 GRAE25RRB 26.09 25mm 2.0472” (52mm) 0.591” 1-7/32”
RAE30RRB 17A55 GRAE30RRB 31.54 30mm 2.4409” (62mm) 0.709” 1-13/32”
RAE35RRB 26A51 GRAE35RRB 46.71 35mm 2.8346” (72mm) 0.748” 1-17/32”
RAE40RRB 49A50 GRAE40RRB 55.11 40mm 3.1496” (80mm) 0.866” 1-23/32”
RAE45RRB 61A65 GRAE45RRB 64.89 45mm 3.3465” (85mm) 0.866” 1-23/32”
SPHERICAL OR BEVELED
IMP
OR
T &
DO
MES
TIC
MO
UN
TED
UN
ITS
Call Toll Free 1-800-457-5348 PAGE 47AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Stamped Steel Zinc-Plated Mounting FlangettesSold in Pairs
Part # Ref. No. To fi t shaft size A B C
40MST 1A35 1/2”, 9/16”, 5/8” 3-3/16” 2-1/2” 2-5/16”
47MST 1A44 3/4” 3-9/16” 2-13/16” 2-5/8”
52MST 1A40 13/16”, 7/8”, 15/16”, 1” 3-3/4” 3” 2-51/64”
62MST 1A55 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4” 4-7/16” 3-9/16” 2-5/16”
72MST 3A55 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16” 4-15/16” 3-15/16” 3-11/16”
2-Bolt Hole Self-Aligning Mounting Flanges
Part # Ref. No. To fi t shaft size A B C
40MSTR 1A35 1/2”, 9/16”, 5/8” 2-23/32” 2-1/2” 2-23/32”
47MSTR 1A44 3/4” 3-9/16” 2-13/16” 3”
52MSTR 1A95 13/16”, 7/8”, 15/16”, 1” 3-3/4” 3” 3-5/32”
62MSTR 2A10 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4” 4-7/16” 3-9/16” 3-5/8”
72MSTR 3A70 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16” 5-1/32” 3-15/16” 4-3/16”
Triangular 3-Bolt Hole Self-Aligning Mounting Flangettes
Part # Ref. No. To fi t shaft size A B C
40PB 1A85 1/2”, 9/16”, 5/8” 1-3/4” 2-11/16” 7/8”
47PB 1A88 3/4” 2” 3” 1”
52PB 1A95 13/16”, 7/8”, 15/16”, 1” 2-7/32” 3-3/8” 1-1/8”
62PB 2A79 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4” 2-5/8” 3-3/4” 1-5/16”
72PB 2A65 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16” 3-1/8” 4-1/4” 1*9/16”
Stamped Steel Pillow Block Housings
IMP
OR
T & D
OM
ESTIC
MO
UN
TED U
NITS
PAGE 48 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
3-Bolt Hole Round Self-Aligning Mounting Flangettes
Part # Ref. No. To fi t shaft size A B
40MS 1A09 1/2”, 9/16”, 5/8” 3-3/16” 2-1/2”
47MS 1A28 3/4” 3-9/16” 2-13-16”
52MS 1A75 13/16”, 7/8”, 15/16”, 1” 3-3/4” 3”
62MS 2A01 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”* 4-7/16” 3-9/16”
72MS 2A55 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16” 4-13/16” 3-15/16”
4-Bolt Hole Round Self-Aligning Mounting Flangettes
Part # Ref. No. To fi t shaft size A B
80MS 5A45 1-1/2”, 1-9/16” 5-7/8” 4-11/16”
85MS 5A95 1-5/8”, 1-11/16”, 1-3/4” 5-7/8” 4-3/4”
87MS 5A95 Square bore 7/8”, 1”, 1-1/8” 5-7/8” 4-3/4”
90MS 6A10 1-13/16”, 1-7/8”, 1-15/16”, 2”* 6-1/2” 5”
100MS 8A99 2”, 2-1/16”, 2-1/8”, 2-3/16” 6-3/4” 5-7/8”
Part # Ref. No. To fi t shaft size A B Type
G52MSA 2A44 13/16”, 7/8”, 15/16”, 1” 3-3/4” 3” 1
G62MSA 2A57 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4” 4-7/16” 3-9/16” 1
G72MSA 3A11 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16” 4-13/16” 3-15/16” 1
G80MSA 6A50 1-1/2”, 1-9/16” 5-13/16” 4-11/16” 2
G85MSA 7A95 1-5/8”, 1-11/16”, 1-3/4” 5-7/8” 4-3/4” 2
G90MSA 8A30 1-13/16”, 1-7/8”, 1-15/16”, 2”** 6-1/8” 5” 2
G100MSA 9A99 2”, 2-1/16”, 2-1/8”, 2-3/16” 6-9/16” 5-7/16” 2
Round Relube Mounting Flangettes
Stamped Steel Zinc-Plated Mounting FlangettesSold in Pairs
IMP
OR
T &
DO
MES
TIC
MO
UN
TED
UN
ITS
Call Toll Free 1-800-457-5348 PAGE 49AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Specialty Mounted Units • Type E Pillow BlocksNon-Expansion • Made in USA
Part #
& Bore SizeRef. No.
A. Bolt Hole CenterB. Center Height C. Overall Length
Minimum Maximum
Type E 1-3/16” PB 123A69 4-3/4” 4-13/16” 1-1/2” 6”
Type E 1-1/4” PB 123A69 4-3/4” 4-13/16” 1-1/2” 6”
Type E 1-3/8” PB 139.98 5-3/8” 5-7/8” 1-7/8” 7-3/8”
Type E 1-7/16” PB 139.98 5-3/8” 5-7/8” 1-7/8” 7-3/8”
Type E 1-1/2” PB 158A15 6-1/8” 6-3/8” 2-1/8” 7-7/8”
Type E 1-11/16” PB 167A14 6-1/8” 6-3/8” 2-1/8” 7-7/8”
Type E 1-3/4” PB 187A71 6-7/8” 7-1/8” 2-1/4” 8-7/8”
Type E 1-5/8” PB 178A97 6-1/8” 6-3/8” 2-1/8” 7-7/8”
Type E 1-15/16” PB 178A20 6-7/8” 7-1/8” 2-1/4” 8-7/8”
Type E 2” PB 178A20 6-7/8” 7-1/8” 2-1/4” 8-7/8”
Type E 2-3/16” PB 199A98 7-5/8” 7-1/8” 2-1/2” 9-5/8”
Type E 2-7/16” PB 225A51 8-5/8” 8-5/8” 2-3/4” 10-1/2”
Type E 2-1/2” PB 234A00 8-5/8” 8-5/8” 2-3/4” 10-1/2”
Type E 2-11/16” PB 382A89 9-15/16” 9-11/16” 3-1/8” 12”
Type E 2-15/16” PB 344A57 9-15/16” 9-11/16” 3-1/8” 12”
Type E 3” PB 344A57 9-15/16” 9-11/16” 3-1/8” 12”
Type E 3-7/16” PB 510A94 10-13/16” 11-13/16” 3-3/4” 14”
Type E 3-1/2” PB 510A94 10-13/16” 11-13/16” 3-3/4” 14”
All units are supplied with Timken® tapered roller bearings, dual locking collars, and dual lip medium contact seal. Very Popular on Rice Rollers.
IMP
OR
T & D
OM
ESTIC
MO
UN
TED U
NITS
PAGE 50 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Specialty Mounted Units • Type E Flange 4 BoltMade in USA
Part # & Bore Size
Ref. No. A. Bolt Hole Center B. Center Height C. Overall Height
Type E 1-3/16” PB 127A54 2-7/8” 3-3/4” 2-13/16”
Type E 1-1/4” PB 127A54 2-7/8” 3-3/4” 2-13/16”
Type E 1-3/8” PB 127A54 3-1/2” 4-5/8” 3-1/6”
Type E 1-7/16” PB 165A86 3-1/2” 4-5/8” 3-1/6”
Type E 1-1/2” PB 160A46 4-1/8” 5-3/8” 3-1/2”
Type E 1-5/8” PB 186A17 4-1/8” 5-3/8” 3-1/2”
Type E 1-11/16” PB 160A46 4-1/8” 5-3/8” 3-1/2”
Type E 1-3/4” PB 184A11 4-3/8” 5-5/8” 3-5/8”
Type E 1-15/16” PB 184A11 4-3/8” 5-5/8” 3-5/8”
Type E 2” PB 184A11 4-3/8” 5-5/8” 3-5/8”
Type E 2-3/16” PB 207A77 4-7/8” 6-1/4” 3-7/8”
Type E 2-1/4” PB 263A57 5-3/8” 6-7/8” 4-3/16”
Type E 2-7/16” PB 229A11 5-3/8” 6-7/8” 4-3/16”
Type E 2-1/2” PB 239A69 5-3/8” 6-7/8” 4-3/16”
Type E 2-15/16” PB 346A12 6” 7-3/4” 4-11/16”
Type E 3” PB 346A12 6” 7-3/4” 4-11/16”
Type E 3-7/16” PB 517A37 7” 9-1/4” 5-1/4”
Type E 3-1/2” PB 569A57 7” 9-1/4” 5-1/4”
Type E 3-15/16” PB 766A80 7-3/4” 10-1/4” 6-1/2”
IMP
OR
T &
DO
MES
TIC
MO
UN
TED
UN
ITS
Call Toll Free 1-800-457-5348 PAGE 51AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Split Journal BearingsBabbitt and Bronze
Part #Ref. No. Shaft Size A B C D E Pipe Tap
Babbitt
60-02-0014 46A55 7/8” 3-5/8” 4-3/4” 1” 2-1/16” 9/16” 1/8”
60-02-0100 46A55 1” 3-5/8” 4-3/4” 1” 2-1/16” 9/16” 1/8”
60-02-0102 56A10 1-1/8” 4-1/8” 5-1/4” 1-1/4” 2-7/16” 5/8” 1/8”
60-02-0103 52A50 1-3/16” 4-1/8” 5-1/4” 1-1/4” 2-7/16” 5/8” 1/8”
60-02-0104 52A50 1-1/4” 4-1/8” 5-1/4” 1-1/4” 2-7/16” 5/8” 1/8”
60-02-0106 66A50 1-3/8” 4-7/8” 6-1/4” 1-3/8” 2-11/16” 11/16” 1/8”
60-02-0107 60A20 1-7/16” 4-7/8” 6-1/4” 1-3/8” 2-11/16” 11/16” 1/8”
60-02-0108 57A27 1-1/2” 4-7/8” 6-1/4” 1-3/8” 2-11/16” 11/16” 1/8”
60-02-0112 75A25 1-3/4” 5-1/4” 6-3/4” 1-1/2” 3” 3/4” 1/4”
60-02-0115 91A70 1-15/16” 6” 7-1/2” 1-3/4” 3-7/16” 13/16” 1/4”
60-02-0200 91A70 2” 6” 7-1/2” 1-3/4” 3-7/16” 13/16” 1/4”
60-02-0203 112A35 2-3/16” 6-1/2” 8-1/2” 1-7/8” 3-3/4” 1” 1/4”
60-02-0207 158A40 2-7/16” 7” 8-7/8” 2-1/8” 4-3/16” 1” 1/4”
Split bearings are recommended for application where it is necessary to remove a cap for servicing or replacing a bearing. This style eliminates removing pulleys and couplings from the shaft when replacement is required. Loading range is limited to 30O below the joint. The angular parting of the cap is provided with shims to compensate for wear and adjustments.
IMP
OR
T & D
OM
ESTIC
MO
UN
TED U
NITS
PAGE 52 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Timken® Bearings Dealer Ref. No. List
These bearings are STOCKED by Agri Industrial Supply, Inc. We can also special order any Timken bearings.Ask your sales rep for details.
Part # Ref. No. Part # Ref. No. Part # Ref. No.
332 7A60 389AS 78A06 594A 49A40
332A 23A47 390 35A51 596 81A69
336 32A69 390A 28A33 598 60A04
337 38A87 394 32A50 612 34A54
342 35A94 394A 13A35 623 57A74
342A 23A75 394AS 17A08 653 32A87
342S 28A11 395 26A47 663 55A70
344 33A47 395A 28A88 1329 13A41
350 52A81 395S 30A84 1380 21A97
350A 40A99 396 54A60 1729 8A40
352 20A87 397 35A17 1729X 14A91
354 9A62 399A 29A97 1755 27A76
354A 13A39 399AS 32A22 1779 15A90
355 28A97 432 25A30 1780 21A20
355X 37A40 444 69A06 1930 15A47
362 13A65 452 37A26 1931 16A06
362A 12A17 453A 24A37 1985 22A84
363 17A71 453X 21A39 1986 53A11
365 33.07 460 35A37 1987 21A29
365A 30A84 462 21A09 2520 18A36
367 31A84 462A 28A77 2523 7A99
368 19A44 469 35A97 2580 25A03
368A 15A24 472 47A49 2585 27A61
368S 9A96 479 59A64 2620 23A04
370A 26A73 493 21A34 2631 13A99
374 20A34 496 40A13 2689 14A72
377 40A60 497 37A80 2690 28A71
382 14A74 498 54A17 2720 7A04
382A 8A90 522 23A80 2729 10A91
382S 16A81 528 44A54 2729X 29A84
383A 20A09 529 44A17 2735X 14A19
385 29A90 552A 33A69 2777 27A67
385A 26A77 553X 39A39 2780 20A10
385SD 79A50 563 34A07 2785 17A66
386A 25A99 566 62A23 2788 12A55
387 17A55 567 54A27 2788A 18A88
387A 16A20 572 27A21 2789 16A73
387AS 16A95 580 42A70 2790 16A13
387S 14A58 582 52A27 2793 20A36
388A 27A79 592 51A74 2794 18A55
389 36A62 592A 30A89 2796 21A02
389A 34A43 594 58A50 2820 14A06
TIM
KEN
® T
AP
ERED
RO
LLER
BEA
RIN
GS
Call Toll Free 1-800-457-5348 PAGE 53AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Timken® Bearings Dealer Ref. No. List
Part # Ref. No. Part # Ref. No. Part # Ref. No.
2878 39A63 07098 20A93 15118 10A99
2879 28A99 07100 10A60 15119 13A54
3120 15A06 07196 4A31 15120 16A26
3188 32A86 07204 6A73 15123 8A97
3320 9A90 08125 23A04 15125 16A81
3381 36A03 08231 9A74 15126 9A15
3383 27A78 09062 38A57 15243 10A70
3490 31A60 09067 20A93 15245 3.25
3520 67A53 09074 14A90 15250 6A87
3525 10A90 09078 20A04 15250X 7A91
3577 38A61 09081 20A04 15520 8A97
3579 40A67 09194 8A50 15523 8A04
3585 29A86 09195 7A20 15578 9A22
3586 38A09 09196 6A17 15580 10A82
3720 8A94 11520 7A69 16137 31A50
3730 21A04 11590 18A84 16150 24A53
3732 50A57 12520 5A10 16282 27A63
3733 73A41 12580 12A75 16283 27A63
3767 33A64 13600LA 15A94 16284 13A86
3776 33A94 13620 9A55 17118 20A84
3780 21A96 13621 6A88 17244 13A95
3782 14.99 13678SD 94A17 17520 11A94
3783 29A55 13685 10A70 17580 28A60
3784 35A77 13686 12A74 17830 54A26
3795 32A45 13687 14A87 17888 66A00
3820 8A39 13889 33A57 18200 39A06
3872 35A29 14116 9A28 18520 13A80
3875 40A31 14119A 22A64 18590 25A20
3876 30A86 14123A 25A23 18620 12A69
3877 26A63 14124 18A51 18690 24A76
3920 9A79 14125A 15A71 18720 13A79
3980 41A10 14130 17A37 18790 19A85
3982 21A41 14136A 18A43 19150 6A62
3994 21A40 14137A 12A99 19269 97A74
5535 61A30 14138A 14A26 22720 42A66
5595 71A31 14274 4A90 22780 36A27
02420 12A87 14276 5A17 24720 8A86
02474 23A29 14283 14A80 24780 12A67
02475 22A70 15100 16A90 25519 45A36
02476 27A72 15101 13A16 25520 6A99
02820 7A69 15103S 20A54 25521 7A97
02872 17A70 15106 17A37 25522 7A90
02875 23A16 15112 14A10 25523 10A24
02878 24A30 15113 16A39 25526 42A51
07000LA 24A07 15116 16A67 25572 28A64
07087 21A29 15117 13A40 25577 18A20
07097 16A59 25578 25A61
TIMK
EN® TA
PER
ED R
OLLER
BEA
RIN
GS
PAGE 54 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Timken® Bearings Dealer Ref. No. List
Part # Ref. No. Part # Ref. No. Part # Ref. No.
25580 10A77 30214 61A99 37425 44A60
25581 24A27 30304 19A34 37625 46A30
25584 23A90 30305 22A33 39250 39A51
25590 10A15 30306 27A90 39520 14A45
25820 7A61 30307 42A18 39521 29A47
25821 6A42 30308 29A79 39580 44A97
25877 9A92 30309 51A07 39581 38A29
25878 12A90 30310 56A39 39585 30A37
26820 24A04 31520 7A52 39590 31A40
26822 10A85 31593 26A53 42620 29A31
26823 16A25 31594 22A03 42687 52A99
26882 18A74 32007X 36A10 42688 42A88
26884 24A10 32008X 22A89 43125 33A93
27620 13A65 32010X 32A46 43312 14A44
27687 55A89 32013X 51A77 45220 17A31
27690 49A74 32206 23A27 45290 37A21
27820 17A40 32207 29A11 45291 38A64
27875 44A27 32208 50A79 46162 47A48
27880 35A49 32209 48A57 46368 16A97
27881 31A37 32210 40A40 47620 29A10
28158 39A17 32213 86A09 47686 48A12
28521 14A40 32216 92A61 47687 56A61
28579 41A84 32312 108A10 47820 47A08
28580 35A57 33013 51A33 47890 76A36
28584 36A34 33020 126A80 48220 83A40
28622 13A19 33113 69A39 48290 152A76
28678 30A44 33205 18A79 53162 50A47
28682 19A28 33207 34A77 53177 32A97
28920 12A54 33208 65A70 53375 23A89
28985 41A36 33210 48A17 H715310 59A59
28995 47A27 33213 86A09 H715311 53A67
29520 24A34 33216 145A99 H715345 109A06
29521 61A66 33225 76A99 HM88510 9A84
29585 38A77 33262 63A39 HM88542 19A83
29590 42A76 33275 24A78 HM88610 8A23
29620 15A84 33287 28A87 HM88649 17A40
29675 33A41 33462 15A75 HM89210 12A94
29685 22A99 33821 20A17 HM89249 25A14
30203 17A51 33885 41A17 HM89410 10A51
30204 17A29 33889 36A69 HM89411 19A99
30205 17A44 33895 35A56 HM89440 35A31
30206 19A20 34300 46A50 HM89443 27A81
30207 26A28 34306 44A70 HM89446 26A16
30208 26A47 34307 84A73 HM89449 21A01
30209 30A83 34478 25A33 HM212010 28A99
30210 23A47 35175 56A16 HM212011 19A79
30211 37A89 35176 46A71 HM212049 32A66
30212 58A05 35326 43A71 HM212210 30A97
TIM
KEN
® T
AP
ERED
RO
LLER
BEA
RIN
GS
Call Toll Free 1-800-457-5348 PAGE 55AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Timken® Bearings Dealer Ref. No. List
Part # Ref. No. Part # Ref. No. Part # Ref. No.
HM218248 52A70 JM719113 43A10 LM501349 7A45
HM803110 17A24 JM719149 72A47 LM603011 5A90
HM803145 34A84 JM720210 51A64 LM603012 7A40
HM803146 29A23 JM720249 103A57 LM603014 14A86
HM803149 27A93 JM822010 42A20 LM603049 8A77
HM807010 16A79 JM822049 95A27 LM814810 27A10
HM807040 50A74 L44600LA 20A76 LM814849 50A61
HM807044 64A53 L44600LB 39A10 M12600LA 13A50
HM807046 38A63 L44610 2A35 M12610 2A91
HM807049 55A35 L44640 29A99 M12648 20A61
HM813810 35A61 L44643 5A25 M12649 5A45
HM813849 69A27 L44645 47A73 M84510 11A04
HM903210 11A15 L44649 5A25 M84548 32A47
HM903249 16A40 L45410 2A65 M86610 4A81
JHM720210 56A29 L45449 7A85 M86649 9A57
JHM720249 119A76 L68110 3A85 M88010 4A94
JHM80707012 30A50 L68111 3A95 M88048 9A91
JHM80707045 57A44 L68149 5A80 M88048A 29A00
JL69310 2A90 L814710 51A36 M201011 13A69
JL69349 5A89 L814749 87A19 M201047 23A64
JL819310 30A97 LM11710 2A65 M802011 8A90
JL819349 57A66 LM11749 6A75 M802048 18A07
JLM104910 6A11 LM11900LA 9A99 M804010 16A79
JLM104948 13A85 LM11910 2A45 M804049 25A63
JLM506810 10A30 LM11949 3A99 Set 1 8A35
JLM506849 19A27 LM12710 2A52 Set 2 6A30
JLM704610 7A50 LM12711 2A83 Set 3 8A24
JLM704649 16A10 LM12748F 12A16 Set 4 7A85
JLM710910 20A54 LM12749 5A88 Set 5 8A95
JLM710946C 45A36 LM29700LA 16A95 Set 6 7A20
JLM714110 20A81 LM29710 5A15 Set 7 71A07
JLM714149 45A46 LM29748 17A50 Set 8 14A10
JLM813010 22A97 LM29749 10A71 Set 9 48A72
JLM813049 54A97 LM48500LA 12A14 Set 10 50A13
JM205110 17A40 LM48510 2A95 Set 11 8A80
JM205149 36A12 LM48548 6A07 Set 12 8A39
JM207110 17A76 LM67000LA 8A99 Set 13 9A90
JM207149 39A06 LM67010 3A10 Set 14 7A87
JM511910 19A93 LM67045 33A54 Set 15 14A50
JM511949 33A10 LM67048 4A99 Set 16 12A90
JM515610 33A99 LM102910 3A55 Set 17 9A90
JM515649 62A10 LM102911 12A74 Set 18 24A81
JM612910 30A94 LM102949 7A51 Set 20 58A24
JM612949 56A89 LM104911 5A86 Set 35 102A66
JM714210 25A63 LM104912 10A14 Set 36 21A55
JM714249 50A90 LM104949 10A81 Set 37 12A90
JM716610 26A11 LM501310 3A65 Set 38 21A30
JM716649 46A29 LM501311 20A57 Set 45 10A91
JM718110 38A79 LM501314 6A43 T126 8A16
JM718149 93A44 LM501334SD 56A44
TIMK
EN® TA
PER
ED R
OLLER
BEA
RIN
GS
PAGE 56 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Flat O.D. Radial Ball BearingsImport and USA
Cylindrical Light Series
METAL SHIELD RUBBER SHIELD
Part # Ref. No. Replaces
Fafnir
Replaces
BCA Part # Ref. No.Replaces
Fafnir
Replaces
BCA
Dimensions
A mm (in) B mm (in) C mm (in)
6000ZZ 3A14 9100KDD 100SS 6000-2RS 3A40 9100PP 100CC 10 (.3937”) 26 (1.023”) 8 (.315”)
6001ZZ 3A30 9101KDD 101SS 6001-2RS 3A86 9101PP 101CC 12 (.4724”) 28 (1.102”) 8 (.315”)
6002ZZ 3A55 9102KDD 102SS 6002-2RS 4A07 9102PP 102CC 15 (.5906”) 32 (1.259”) 9 (.354”)
6003ZZ 3A67 9103KDD 103SS 6003-2RS 4A33 9103PP 103CC 17 (.6693”) 36 (1.378”) 10 (.393”)
6004ZZ 3A99 9104KDD 104SS 6004-2RS 5A42 9104PP 104CC 20 (.7874”) 42 (1.653”) 12 (.472”)
6005ZZ 4A79 9105KDD 105SS 6005-2RS 5A73 9105PP 105CC 25 (.9843) 47 (1.850”) 12 (.472”)
6006ZZ 5A81 9106KDD 106SS 6006-2RS 6A28 9106PP 106CC 30 (1.181”) 55 (2.165”) 13 (.511”)
6007ZZ 6A03 9107KDD 107SS 6007-2RS 6A54 9107PP 107CC 35 (1.378”) 62 (2.440”) 14 (.551”)
6008ZZ 6A79 9108KDD 108SS 6008-2RS 7A37 9108PP 108CC 40 (1.547”) 68 (2.667”) 15 (.590”)
6009ZZ 8A49 9109KDD 109SS 6009-2RS 9A79 9109PP 109CC 45 (1.771”) 72 (2.952”) 16 (.629”)
6010ZZ 10A83 9110KDD 110SS 6010-2RS 11A28 9110PP 110CC 50 (1.968”) 80 (3.149”) 16 (.629”)
6011ZZ 11A58 9111KDD 111SS 6011-2RS 12A10 9111PP 111CC 55 (2.165”) 90 (3.543”) 18 (.708”)
6012ZZ 13A10 9112KDD 112SS 6012-2RS 14A52 9112PP 112CC 60 (2.362”) 95 (3.740”) 18 (.708”)
6013ZZ 16A43 9113KDD 113SS 6013-2RS 17A46 9113PP 113CC 65 (2.559”) 100 (3.937”) 18 (.708”)
6014ZZ 19A78 9114KDD 114SS 6014-2RS 22A25 9114PP 114CC 70 (2.755”) 110 (4.330”) 20 (.784”)
6015ZZ 23A79 9115KDD 115SS 6015-2RS 26A47 9115PP 115CC 75 (2.952”) 115 (4.527”) 20 (.784”)
6016ZZ 29A77 9116KDD 116SS 6016-2RS 38A10 9116PP 116CC 80 (3.149”) 125 (4.921”) 22 (.866”)
6017ZZ 35A23 9117KDD 117SS 6017-2RS 41A10 9117PP 117CC 85 (3.346”) 130 (5.118”) 22 (.866”)
Agri Industrial Supply, Inc. stocks the following brands
originating from the listed country for all radial ball bearings:
• Nachi (Japan)
• NTN® (USA, Japan)
• NSK (USA, Japan)
• NBK (Taiwan)
• SKF® (USA, Germany, and Mexico)
RA
DIA
L B
ALL
BEA
RIN
GS
Call Toll Free 1-800-457-5348 PAGE 57AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Radial Ball BearingsImport and USA
METAL SHIELD RUBBER SHIELD
Part #Ref.
No.
Replaces
Fafnir
Replaces
BCA Part #Ref.
No.
Replaces
Fafnir
Replaces
BCA
Dimensions
A mm (in) B mm (in) C mm (in)
6200ZZ 2A68 200KDD 200SS 6200-2RS 2A98 200PP 200CC 10mm (.3937”) 30mm (1.1811”) 9mm (.3543”)
6201ZZ 2A83 201KDD 201SS 6201-2RS 3A25 201PP 201CC 12mm (.4724”) 32mm (1.2598”) 10mm (.3937”)
6201½ZZ 3A61 --- --- 6202½-2RS 3A95 --- --- 12.7mm (.5000”) 32mm (1.2598”) 10mm (.3937”)
6202ZZ 3A04 202KDD 202SS 602-2RS 3A55 202PP 202FF 15mm (.5096”) 35mm (1.3780”) 11mm (.4331”)
6202½ZZ 3A81 --- --- 6202½-2RS 4A82 --- --- 12.7mm (.5000”) 35mm (1.3780”) 11mm (.4331”)
62025⁄8ZZ 3A04 --- 202SSB 62025⁄8-2RS 3A25 202PP-10 202FFB 15.875mm (.625”) 35mm (1.3780”) 11mm (.4331”)
6203ZZ 2A10 203KDD 203SS 6203-2RS 2A55 203PP 203PP 17mm (.6693”) 40mm (1.5748”) 12mm (.4724”)
--- --- --- --- 62025⁄8-2RS 3A10 203PP-10 8980DD 15.875mm (.625”) 40mm (1.5748”) 12mm (.4724”)
--- --- --- --- 62033⁄4-2RS 3A95 --- --- 19.05mm (.750”) 40mm (1.5748”) 12mm (.4724”)
6204ZZ 3A86 204KDD 204SS 6204-2RS 3A95 204PP 204FF 20mm (.7874”) 47mm (1.8504”) 14mm (.5512”)
--- --- -- --- 62043⁄4-2RS 4A65 --- --- 19.05mm (.750”) 47mm (1.8504”) 14mm (.5512”)
6205ZZ 4A22 205KDD 205SS 6205-2RS 4A50 205PP 205FF 25mm (.9843”) 52mm (2.0472”) 15mm (.5906”)
--- --- -- --- 6205-1”-2RS 6A88 --- --- 25.4mm(1.0000”) 52mm (2.0472”) 15mm (.5906”)
6206ZZ 4A89 206KDD 206SS 6206-2RS 5A72 206PP 206FF 30mm (1.1811”) 62mm (2.4409”) 16mm (.6299”)
6207ZZ 6A70 207KDD 207SS 6207-2RS 7A73 207PP 207FF 35mm (1.3780”) 72mm (2.8346”) 17mm (.6693”)
6208ZZ 8A34 208KDD 208SS 6208-2RS 9A37 208PP 208DD 40mm (1.5748”) 80mm (3.1496”) 18mm (.7087”)
6209ZZ 9A17 209KDD 209SS 6209-2RS 10A25 209PP 209DD 45mm (1.7717”) 85mm (3.3465”) 19mm (.7480”)
6210ZZ 10A25 210KDD 210SS 6210-2RS 11A07 210PP 210DD 50mm (1.9685”) 90mm (3.5433”) 20mm (.7874”)
6211ZZ 13A65 211KDD 211SS 6211-2RS 18A80 211PP 211DD 55mm (2.1654”) 100mm (3.9370”) 21mm (.8266”)
6212ZZ 15A97 212KDD 212SS 6212-2RS 19A06 212PP 212DD 60mm (2.3622”) 110mm (4.3307”) 22mm (.8661”)
6213ZZ 19A47 213KDD 213SS 6213-2RS 23A28 213PP 213DD 65mm (2.5591”) 120mm (4.7244”) 23mm (.9055”)
6214ZZ 30A84 214KDD 214SS 6214-2RS 32A50 214PP 214DD 70mm (2.7559”) 125mm (4.9213”) 24mm (.9449”)
6215ZZ 31A05 215KDD 215SS 6215-2RS 34A50 215PP 215DD 75mm (2.9258”) 130mm (5.1181”) 25mm (.9843”)
Cylindrical Standard Series
RA
DIA
L BA
LL BEA
RIN
GS
PAGE 58 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Radial Ball BearingsImport and USA
Cylindrical Medium Series
METAL SHIELD RUBBER SHIELD
Part # Ref.No. Replaces
Fafnir
Replaces
BCA Part # Ref. No.Replaces
Fafnir
Replaces
BCA
Dimensions
A mm (in) B mm (in) C mm (in)
6300ZZ 3A19 300KDD 300SS 6300-2RS 3A61 300PP 300DD 10mm (.3937”) 35mm (1.378”) 11mm (.4331”)
6301ZZ 3A40 301KDD 301SS 6301-2RS 3A86 301PP 301DD 12mm (.4724”) 37mm (1.456”) 12mm (.4724”)
6302ZZ 3A50 302KDD 302SS 6302-2RS 4A02 302PP 302DD 15mm (.590”) 42mm (1.653”) 13mm (.5118”)
6303ZZ 4A02 303KDD 303SS 6303-2RS 4A33 303PP 303DD 17mm (.669”) 47mm (1.850”) 14mm (.5512”)
6304ZZ 4A64 304KDD 304SS 6304-2RS 5A10 304PP 304DD 20mm (.787”) 52mm (2.047”) 15mm (.590”)
6305ZZ 5A25 305KDD 305SS 6305-2RS 6A13 305PP 305DD 25mm (.984”) 62mm (2.440”) 17mm (.669”)
6306ZZ 6A43 306KDD 306SS 6306-2RS 8A60 306PP 306DD 30mm (1.181”) 72mm (2.834”) 19mm (.748”)
6307ZZ 8A14 307KDD 307SS 6307-2RS 10A25 307PP 307FF 35mm (1.378”) 80mm (3.149”) 21mm (.826”)
6308ZZ 11A28 308KDD 308SS 6308-2RS 12A31 308PP 308FF 40mm (1.574” ) 90mm (3.543”) 23mm (.905”)
6309ZZ 16A38 309KDD 309SS 6309-2RS 17A00 309PP 309FF 45mm (1.771”) 100mm (3.937”) 25mm (.984”)
6310ZZ 24A26 310KDD 310SS 6310-2RS 27A20 310PP 310FF 50mm (1.968”) 110mm (4.330”) 27mm (1.063”)
6311ZZ 27A50 311KDD 311SS 6311-2RS 29A55 311PP 311FF 55mm (2.1654”) 120mm (4.724”) 29mm (1.1417”)
6312ZZ 30A55 312KDD 312SS 6312-2RS 35A66 312PP 312FF 60mm (2.362”) 130mm (5.118”) 31mm (1.220”)
6313ZZ 31A20 313KDD 313SS 6313-2RS 37A85 313PP 313FF 65mm (2.559”) 140mm (5.511”) 33mm (1.299”)
6314ZZ 34A40 314KDD 314SS 6314-2RS 39A70 314PP 314FF 70mm (2.755”) 150mm (5.905”) 35mm (1.378”)
RA
DIA
L B
ALL
BEA
RIN
GS
Call Toll Free 1-800-457-5348 PAGE 59AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Double Row Ball Bearings
Metal Shield Part # Ref. No. Rubber Shield Part # Ref. No. A. BORE mm (in) B. O.D. mm (in) C. WIDTH mm (in)
5201ZZ 11A64 5201-2RS 11A95 12mm (.472”) 32mm (1.259”) 15.9mm (.625”)
5202ZZ 14A83 5202-2RS 15A55 15mm (.590”) 35mm (1.378”) 15.9mm (.625”)
5203ZZ 17A41 5203-2RS 19.50 17mm (.669”) 40mm (1.574”) 17.5mm (.688”)
5204ZZ 19A06 5204-2RS 20A55 20mm (.784”) 47mm (1.850”) 20.6mm (.812”)
5205ZZ 19A98 5205-2RS 21A37 25mm (.984”) 52mm (2.047”) 20.6mm (.812”)
5206ZZ 22A92 5206-2RS 24A93 30mm (1.181”) 62mm (2.440”) 23.8mm (.938”)
5207ZZ 26A73 5207-2RS 28.55 35mm (1.378”) 72mm (2.834”) 27.0mm (1.062”)
5208ZZ 29A10 5208-2RS 30.28 40mm (1.574”) 80mm (3.149”) 30.2mm (1.188”)
5209ZZ 33A73 5209-2RS 34A81 45mm (1.771”) 85mm (3.346”) 30.2mm (1.188”)
5210ZZ 38A70 5210-2RS 39A35 50mm (1.968”) 90mm (3.543”) 30.2mm (1.188”)
Standard Series
Medium Series
Metal Shield Part # Ref. No. Rubber Shield Part # Ref. No. ( A. BORE mm (in) B. O.D. mm (in) C. WIDTH mm (in)
5302ZZ 17A00 5302-2RS 16A90 15mm (.590”) 42mm (1.653”) 19.05mm (.750”)
5303ZZ 16A12 5303-2RS 18A44 17mm (.669”) 47mm (1.850”) 22.22mm (.875”)
5304ZZ 25A60 5304-2RS 28A33 20mm (.784”) 52mm (2.047”) 22.22mm (.875”)
5305ZZ 30A54 5305-2RS 33A27 25mm (.984”) 62mm (2.440”) 25.40mm (1.000”)
5306ZZ 36A57 5306-2RS 38A73 30mm (1.181”) 7mm (2.834”) 30.17mm (1.188”)
5307ZZ 37A29 5307-2RS 40A02 35mm (1.378”) 80mm (3.149”) 35.00mm (1.375”)
5308ZZ 42A44 5308-2RS 44A55 40mm (1.574”) 90mm (3.543”) 36.53mm (1.438”)
5309ZZ 54A70 5309-2RS 55A20 45mm (1.771”) 100mm (3.937”) 39.67mm (1.562”)
5310ZZ 58A50 5310-2RS 61A25 50mm (1.968”) 110mm (4.330”) 44.45mm (1.750”)
5311ZZ 79A32 5311-2RS 85A90 55mm (2.166”) 120mm (4.724”) 49.22mm (1.938”)
5312ZZ 85A08 5312-2RS 88A27 60mm (2.632”) 130mm (5.118”) 53.98mm (2.135”)
RA
DIA
L BA
LL BEA
RIN
GS
PAGE 60 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Inch Dimensions Ball Bearings
Shielded Part # Ref. No. Sealed Part # Ref. No. A. BORE B. OUTSIDE DIAMETER C. WIDTH
1601-ZZ 3A75 1601-2RS 4A47 3/16” 11/16” 5/16”
1602-ZZ 3A75 1602-2RS 4A47 1/4” 11/16” 1/4”
1603-ZZ 4A20 1603-2RS 4A85 5/16” 7/8” .2813”
1604-ZZ 4A20 1604-2RS 4A85 3/8” 7/8” .342”
1605-ZZ 4A20 1605-2RS 4A85 5/16” 29/32” 5/16”
1606-ZZ 6A60 1606-2RS 6A85 3/8” 29/32” 5/16”
1607-ZZ 4A20 1607-2RS 4A85 7/16” 29/32” 5/16”
1614-ZZ 4A35 1614-2RS 6A25 3/8” 1-1/8” 3/8”
1615-ZZ 4A35 1615-2RS 5A99 7/16” 1-1/8” 3/8”
1616-ZZ 5A60 1616-2RS 6A25 1/2” 1-1/8” 3/8”
1620-ZZ 4A35 1620-2RS 5A68 7/16” 1-3/8” 7/16”
1621-ZZ 6A01 1621-2RS 6A25 1/2” 1-3/8” 7/16”
1622-ZZ 4A10 1622-2RS 4A60 9/16” 1-3/8” 7/16”
1623-ZZ 6A01 1623-2RS 6A25 5/8” 1-3/8” 7/16”
1628-ZZ 6A15 1628-2RS 6A65 5/8” 1-5/8” 1/2”
1630-ZZ 7A05 1630-2RS 7A45 3/4” 1-5/8” 1/2”
1633-ZZ 6A15 1633-2RS 6A65 5/8” 1-3/4” 1/2”
1635-ZZ 7A05 1635-2RS 7A45 3/4” 1-3/4” 1/2”
1638-ZZ 7A55 1638-2RS 8A35 3/4” 2” 9/16”
1640-ZZ 7A55 1640-2RS 8A35 7/8” 2” 9/16”
1641-ZZ 7A55 1641-2RS 8A35 1” 2” 9/16”
1652-ZZ 9A80 1652-2RS 10A87 1-1/8” 2-1/2” 5/8”
1654-ZZ 9A80 1654-2RS 11A86 1-1/4” 2-1/2” 5/8”
1657-ZZ 13A10 1657-2RS 14A55 1-1/4” 2-9/16” 11/16”
1658-ZZ 16A67 1658-2RS 18A27 1-5/8” 2-9/16” 11/16”
• Single row, precision ground radial ball bearings
• Recommended for medium loads
• Recommended maximum speed of 5000 RPM
• Fits many farm applications
RA
DIA
L B
ALL
BEA
RIN
GS
Call Toll Free 1-800-457-5348 PAGE 61AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Radial Ball BearingsPopular Combine Applications
Part # Ref. No. Replaces BCA® Replaces Fafnir A. BORE in (mm) B. O.D. in (mm) C. WIDTH in (mm)
CS203DDU 5A90 BCA S203FF 203PPB 1.9685” (50mm) 4.3307” (110mm) 1.0630” (27mm)
CS204DDU 9A90 BCA S204FF 204PPB 1.7717” (45mm) 3.9370” (100mm) 0.9843” (25mm)
CS205DDU 10A90 BCA S205FF 205PPB 0.7874” (20mm) 1.8504” (47mm) 0.5512” (14mm)
CS206DDU 11A45 BCA S206FF 206PPB 0.9843” (25mm) 2.0472” (52mm) 0.5906” (15mm)
CS207DDU 12A49 BCA S207FF 207PPB 1.1811” (30mm) 2.4409” (62mm) 0.6299” (16mm)
CS208DDU 17A45 BCA S208FF 208PPB 1.3780” (35mm) 2.8346” (72mm) 0.6693” (17mm)
CS209DDU 18A75 BCA S209FF 209PPB 1.5748” (40mm) 3.1496” (80mm) 0.7087” (18mm)
CS210DDU 24A41 BCA S210FF 210PPB 1.7717” (45mm) 3.3465” (85mm) 0.7480” (19mm)
CS213DDU 44A95 BCA S213FF 213PPB 0.6693” (17mm) 1.5748” (40mm) 0.4724” (12mm)
CS305DDU 13A21 BCA S305FF 305PPB 1.9685” (50mm) 3.5433” (90mm) 0.7874” (20mm)
CS306DDU 15A90 BCA S306FF 306PPB 2.5591” (65mm) 4.7244” (120mm) 0.9055” (23mm)
CS307DDU 21A53 BCA S307FF 307PPB 0.9843” (25mm) 2.4409” (62mm) 0.6693” (17mm)
CS308DDU 32A20 BCA S308FF 308PPB 1.1811” (30mm) 2.8346” (72mm) 0.7480” (19mm)
CS309DDU 34A13 BCA S309FF 309PPB 1.3780” (35mm) 3.1496” (80mm) 0.8268” (21mm)
CS310DDU 43A98 BCA S310FF 310PPB 1.5748” (40mm) 3.5433” (90mm) 0.9055” (23mm)
Beveled Outside Diameter
Inch Dimension - Rubber Shielded
Part # Ref. No. Replaces BCA® Replaces Fafnir A. BORE in B. O.D. in C. WIDTH in
R4-2RS 3A40 BCA R4CC S1PP7 1/4” 5/8” 0.196”
R6-2RS 3A75 BCA R6CC S3PP 3/8” 7/8” 9/32”
R8-2RS 4A20 BCA R8CC S5PP 1/2” 1-1/8” 5/16”
R10-2RS 5A28 BCA R10CC S7PP 5/8” 1-3/8” 11/32”
R12-2RS 7A10 BCA R12CC S8PP 3/4” 1 -5/8” 7/16”
R14-2RS 8A50 --- --- 7/8” 1-7/8” 1/2”
R16-2RS 9A50 --- --- 1” 2” 1/2”
R20-2RS 10A90 --- --- 1-1/4” 2-1/4” 1/2”
RA
DIA
L BA
LL BEA
RIN
GS
PAGE 62 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Needle Roller BearingsShell Type
• Inch Dimension
• Lightweight but rated for heavy loads
• We cam special order any needle bearing not
listed — ask your sales rep for details.
Part # Ref. No. Bore Outside Diameter Length
BA108 4A20 5/8” 13/16” 1/2”
BA1012 4A50 5/8” 13/16” 3/4”
BA1016 4A70 5/8” 13/16” 1”
BA1280 4A10 3/4” 1” 1/2”
BA1210 4A35 3/4” 1” 5/8”
BA1212 4A90 3/4” 1” 3/4”
BA1216 5A55 3/4” 1” 1”
BA146 4A10 7/8” 1-1/8” 3/8”
BA148 4A20 7/8” 1-1/8” 1/2”
BA1416 5A55 7/8” 1” 1”
BA168 4A48 1” 1-1/4” 1/2”
BA1612 4A82 1” 1-1/4” 3/4”
BA1616 5A10 1” 1-1/4” 1”
BA188 5A30 1-1/8” 1-3/8” 1/2”
BA1812 5A69 1-1/8” 1-3/8” 3/4”
BA1816 6A70 1-1/8” 1-3/8” 1”
BA1820 7A50 1-1/8” 1-3/8” 1-1/4”
BA2012 6A01 1-1/4” 1-1/2” 3/4”
BA2016 6A84 1-1/4” 1-1/2” 1”
BA2020 7A10 1-1/4” 1-1/2” 1-1/4”
BA2216 7A94 1-3/8” 1-5/8” 1”
BA2220 8A05 1-3/8” 1-5/8” 1-1/4”
BA2416 7A91 1-1/2” 1-7/8” 1”
BA2616 8A78 1-5/8” 2” 1”
BA2620 9A99 1-5/8” 1-5/8” 1-1/4”
BA2812 10A90 1-3/4” 1-3/4” 3/4”
BA2816 8A99 1-3/4” 1-3/4” 1”
BA2820 11A90 1-3/4” 1-3/4” 1-1/4”
Our Needle Bearings Are NOT Manufactured in China!
NEE
DLE
RO
LLER
BEA
RIN
GS
Call Toll Free 1-800-457-5348 PAGE 63AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Wheel & Hub Bearing Kits
Kits for popular agricultural equipment consists of Timken® bearings and National® oil seals. Most kits include hub caps.
Part # Description Ref. No.
Amco#1 Fits F-15 disc mainframe hub with 204500 seal 42A91
Amco#1-A Fits F-15 disc mainframe hub with 204506 seal 43A44
Amco#1-B Fits F-15 disc mainframe hub with 204035 seal 43A79
Amco#2 Fits F-15 disc with wing hub and J43 transport wheel 55A13
Amco#F-15 Fits F-15 disc mainframe with 8-bolt hub 55A45
Agri#17 Fits F-15 disc with wing hub and J42 transport wheel 49A93
AMCO
Part # Description Ref. No.
Brandt #1 Fits old style 5-bolt hub fl oat 29A67
Brandt #2 Fits new style 6-bolt hub fl oat 2590
BRANDT
Part # Description Ref. No.
BH500-BK Tail wheel kit for all models with #500 tail wheel. 19A99
BUSH HOG ROTARY MOWERS
Part # Description Ref. No.
Tigermate 1 Fits Tigermate II DMI Walking Tandem for 10’ and 12’ single fold main and wings 44A55
Tigermate 2 Fits Tigermate II DMI Wheel Bearing Kit 32A65
Tigermate 3 Fits Tigermate II DMI Double Fold Walking Beam. Also fi ts MRX 690 Pivoting Walking Tandem. 67A28
Tigermate 4 Wheel Bearing Kit fi ts all DMI applications using 50-8 hub, 8-bolt 48A55
Tigermate 5 Wheel Bearing Kit for Tigermate DMI applications using Q633 hub, 4-bolt 22A96
Tigermate 6 Wheel Bearing Kit for Tigermate II & DMI using Q710 6-bolt hub 26A11
Tigermate 7 Wheel Bearing Kit for Tigermate DMI using 783 hub using CR 16289 seal, 6-bolt 32A65
DMI
Part # Description Ref. No.
Fair Oaks #1 Fits land lever and roller wheel bearing kit 29A95
FAIR OAKS
Part # Description Ref. No.
Agri Do All #1 Do All using 204500 seal 31A55
Agri Do All #1A Do All hub using 204038 seal 31A55
FORREST CITY DO-ALLS
WH
EEL & H
UB
BEA
RIN
G K
ITS
PAGE 64 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Wheel & Hub Bearing Kits
Part # Replaces Part # Description Ref. No.
AGRI #5 Kit 63881C91 Transport Wheel Bearing Kit for 470-501 Disks 21A25
AGRI #6 Kit 1230962A2Transport Wheel Bearing Kit for IHC® Chisel Plow 5500, 5600, 5700; IH® Vibra Shank Cultivators 4500 & 4600. Fits Disk Harrows 596, 770, and 3900. Also fi ts RMX 340, RMX 370, and RMX 690 with 6-bolt hubs.
29A89
AGRI #2950 Kit Wheel Bearing Kit for 2390 and 2950 Disks 49A35
AGRI #3950 KitWheel Bearing Kit for 3950 with 8-bolt hub. Also fi ts RMX 340 and RMX 370 with 8-bolt hubs.
54A55
RMX #1Pivoting Rocking Tandem Kit for RMX 340 and RMX 370. Also fi ts DMI Tigermate Double Fold Walking Beam.
67A28
CASE IHC®
Part # Description Ref. No.
Glencoe #1Gauge and Transport Wheel Hub fi ts cultivator models: 240, 430, 440, 630, 640, 830 and 1230; OEM Hub #P1427; Manufacturer’s Hub #Q633.
24A50
Glencoe #2Transport Wheel Hub; fi ts PDFC model fi eld and all SF and TF Series Row Crop Cultivators; OEM Hub #P1482; Manufacturer’s Hub #Q888.
28A55
Glencoe #3 Fits Glencoe Hub #P1474 29A35
GLENCO
Part # Description Ref. No.
AGRI #1J532 KitTransport wheel bearing kit for models 115, 200, 210, 230, 235, 310, 335, 360, 370, 440, 445, 1630, and 1640
32A50
AGRI #1J542 Kit Transport wheel bearing kit for models 630 disk and 960, 1000, 1010, 1050 fi eld cultivators 33A75
AGRI #103B Kit Wheel Kit for 400, 600, 610 and 810 Finishing Harrow for Hub GZ 900696 27A29
AGRI #AA44267 Complete Bearing Kit for 750 Grain Drill Seeder Hub 26A55
AGRI #7300 Kit Wheel Bearing Kit for 7300 Planter 22A90
JOHN DEERE
Part # Description Ref. No.
Krause #1 Transport wheel for 3950 36A43
Krause #2 Walking tandem for 8200 428A6
Krause #3 Gauge wheel bearing kit for 8200 31A20
Krause #4 Center section for 8200 36A23
KRAUSE
Part # Description Ref. No.
KMC GW Kit Fits KMC gauge wheels 31A19
KMC
WH
EEL
& H
UB
BEA
RIN
G K
ITS
Call Toll Free 1-800-457-5348 PAGE 65AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Wheel & Hub Bearing Kits
Part # Description Ref. No.
AGRI #106-B Fits Cultivator Disk Hiller #2-406-10038; comes with sealed inner cone bearing 29A20
LANDOLL
Part # Description Ref. No.
Marliss Coulter Fits Marliss Grain Drill old style hub with fl uted coulter 23A10
MARLISS
Part # Description Ref. No.
McKee #1 Bearing kit for Transport Cultivator wheel hub 27A08
McKee #2 Same as above except with seal on inner bearing; also fi ts KBH and Adams. 30A86
McKEE
Part # Description Ref. No.
Midland #1 6-bolt old style disk 37A25
Midland #2 8-bolt new style disk 42A83
MIDLAND
Part # Description Ref. No.
Orthman #1 Gauge wheel bearing kit for OEM #302-204, Manufacturer’s hub #Q709 23A60
Orthman OLA Fits 780 Lift Assist attachment 39A19
ORTHMAN
Part # Description Ref. No.
4000-6.4 Hub kit for 4000, 6-bolt. 4000lb capacity. 29A55
4000-8.6 Hub kit for 4000, 8-bolt. 6000lb capacity. 52A55
4000-8.75 Hub kit for 4000, 8-bolt. 7000lb capacity. 55A58
MacFARLANE
Part # Description Ref. No.
AGRI RDB #1 Fits models LSE 51A55
AGRI RDB #1A Fits models LSE with 46997 seal 51A79
AGRI RDB #2 Fits models 17-C 78A55
REYNOLDS DIRT BUCKET
WH
EEL & H
UB
BEA
RIN
G K
ITS
PAGE 66 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Wheel & Hub Bearing Kits
Part # Description Ref. No.
Rome #1 Bearing kit for wheel hub 118A74
Rome #1 W1CR Bearing kit for wheel hub using wider seal 127A20
ROME LEVEE PLOW
Part # Description Ref. No.
LF15M Fits Series Rhino Shredder - #15 Magnum 15 Foot Backwing Bush Hog - Wheel Hub 33A10
SERVIS RHINO
Part # Description Ref. No.
AGRI #107B Fits Sukup disk hiller and coulter hub 27A52
SUKUP
Part # Description Ref. No.
Sunfl ower #1 Hub kit fi ts 1232, 1233, 1234, and others using 2” I.D. seal 473463 29A55
Sunfl ower #1-A Hub kit fi ts 1232, 1233, 1234, and others using 2.296” I.D. seal 473463 29A55
Sunfl ower #2 Fits 1232, 1233, 1234, and others for tandem 81A90
Sunfl ower #3 Gauge wheel kit for 1232, 1233, 1234, and others 29A85
SUNFLOWER
Part # Description Ref. No.
AGRI #207937 Fits 580 and 590 Disk Wheel Hub 55A13
TAYLOR WAY
Part # Description Ref. No.
Triple K #1 Tandem Axle Hub and Main Frame Hub for Field Cultivators 3500 and some SBC’s 32A77
Triple K #2 Wing Hub Kit for Field Cultivators 3500 and some SBC’s 31A94
TRIPLE K - KONGSKILDE
Part # Description Ref. No.
W&A #1 For models using Q809 Manufacturer’s Hub 31A22
W&A DO-ALL
Part # Description Ref. No.
AGRI #104B Bearing Kit for Coulter Hub for Yetter Fertilizer Application; Also fi ts KBH and Adams 23A10
AGRI #105B Same as above except with seal on inner bearing; Also fi ts KBH and Adams 23A10
YETTER
WH
EEL
& H
UB
BEA
RIN
G K
ITS
Call Toll Free 1-800-457-5348 PAGE 67AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Replacement John Deere Cotton PickerBearings, Belts, Chain, and Seals
REP
LAC
EMEN
T PA
RTS
JOH
N D
EERE C
OTTO
N P
ICK
ER
Part # Ref. No. Description
AN111537 5A55 Picker Bar Bearing for Most Models
AN110820 16A90 Unit Drive Countershaft & Fan Shaft 1 1/8” Bore; 3-Bolt Flange Complete
AN32790 6A95 Replacement Bearing for Above
AN114202 17A95Unit Drive Countershaft & Fan Shaft 1 3/8” Bore; 2-Bolt Flange Complete on Models 9910, 9920, 9930, 9940 & 9950
JD9462 8A95 Replacement Bearing Only for Above
AN112851 16A90 Fan Rotor Shaft & Sleeve 1-1/8” Bore; 2-Bolt Flange for Model 9900 Picker
AN11810 6A95 Replacement Bearing Only for Above
AN272787 7A401-3/16” Bore Upper Housing Drum Drive Spur Gear Idler Bearing; Picker Bar Drum SpindleBearing and Doffer Drive Idler Gear Bearing for Models 9935, 9970, 9976 & 9986
JD7142 3A95 (Substitute for JD9287) Drum Slip Clutch & Idler Gear Bearing Model 9900 thru 9965
JD7147 7A50 Top Plate Bearing on 299 Model
JD7162 4A75 Spindle Drive Top Shaft Bearing on 299 Model
JD7187 4A99 Picking Unit Gear Case Tapered Roller Bearing for Most Models - Timken® - USA Brand
JD8225 3A10 Race for Above Bearing
JD8593 7A75 Upper Housing Drum Drive Bearing for Models 9900 thru 9950
JD8674 7A40 Upper Housing Idler Spur Gear Bearing used on Models 9935, 9960 & 9965 (Same as JD10123)
JD8804 4A10 Spindle Drive Needle Bearing for all Picker Models - Made in the USA
JD9209 7A75 Upper Housing Drum Drive Bearing for Models 9935, 9960, 9965, 9970, 9976 & 9986
JD9214-USA 7A50 Idler Bearing for Older Models 499 and 699 - Made in the USA
JD9214 2A25 Idler Bearing for Older Models 499 and 699 - Import
JD9321 4A50(Substitute for JD7144) Doffer Adjustment Bearing for Older Models and Drum Slip Clutch Bearings for Models 9935, 9970, 9976 & 9986
JD9322 14A61 (Substitute for JD8576) Top Drive Bearing with Snap Ring on 499 & 699 Models
JD9323 6A35 Upper Housing Drum Drive Bearing for Models 9935, 9960, 9965, 9970, 9976 & 9986
JD9324 4A95 Drum Slip Clutch Idler Bearing for Models 9900 thru 9965
JD9353 8A60 Middle and Outer Picking Unit Bevel Gear Hex Bore Bearing for Model 9900 thru 9965
JD9467 5A95 Upper Doffer Adjusting Housing Bearing for Models 9900 thru 9986
JD9804 4A90 Bottom Doffer Shaft Needle Bearing for models 9900 & 9910
JD9813 8A99 (Substitute for JD8823) Upper Housing Drum Drive Gear Needle Bearing for Models 9900 thru 9965
JD10123 7A85 Bottom Doffer Bearing for Models 9910 thru 9965
For Models 99, 299, 499, 699, 9000, 9910, 9920, 9930, 9935, 9940, 9950, 9960,9965, 9970, 9976 & 9986
Replacement John Deere Cotton Picker Bearings
CO
TTON
PIC
KER
BEA
RIN
G K
ITS
PAGE 68 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Replacement John Deere Cotton PickerBearings, Belts, Chain, and Seals
Part # Ref. No. Description
N115368
P.O.R
Hydraulic Pump Belt - Late 699 to 9910
N111527 Unit Drive Belt - Left Hand - Model 699 to 9930
N121116 Unit Drive Belt - Right Hand - Model 699 to 9930
N129368 (Substitute for N190762) Blower Belt on Models 9920 and 9930
E61326 Hydraulic Pump Belt on Models 9920 and 9930
AT23317 Fan & Alternator Belt on Models 699 to 9900 - Requires 2
N117398 Hydraulic Pump & Engine - Left Hand Rear Mounting (Solid Engine Mountings) for Model 9900
AN190948 Unit Drive Countershaft & Slip Clutch Belt on Models 9940 and 9950 - Requires 2
AR86496 Engine Fan & Alternator Belt for Model 9940 - Requires 2
AR74662 Engine Fan & Alternator Belt for Model 9950 - Requires 2
AN190205 Engine Fan & Alternator Belt for Models 9910, 9920 & 9930 - Requires 2
Replacement John Deere Cotton Picker Belts
Part # Ref. No. Description
AN113170 8A25 12 Bar Doffer Drive Chain - Import
AN113171 8A95 16 Bar Doffer Drive Chain - Import
AN113170-USA 16A01 12 Bar Doffer Drive Chain - Made in the USA
AN113171-USA 17A55 16 Bar Doffer Drive Chain - Made in the USA
Replacement John Deere Cotton Picker Chain
Part # Ref. No. Description
L1206N 3A10 Upper Housing Drum Drive Gear Seal. Used with JD9813 Needle Bearing on Models 990 thru 9950.
L2015 2A65 Doffer Shaft Seal on Models 499 & 699
L2779 3A95 Picker Bar Drum Seal - Old Style; Used on all Models
AN190474 3A65 Picker Bar Drum Seal - New Style; Used on all Models
N5425DN 0A90 Doffer Seal for 9900 Old Style; Used with JD9804
T22069 3A40 (Substitute for AN32717) Transmission and Drive Train Seal on Models 9900, 9910 & 9920
Replacement John Deere Cotton Picker Seals
Call Toll Free 1-800-457-5348 PAGE 69AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
IHC® Cotton Picker Bearings
Replaces IHC Part # Description Ref. No.
ST205A Picker Drive Bearing on Pinion Shaft: fi ts Models 422, 622 & 782 3A95
ST213 Picker Drive Bearing on Sprocket Shaft; fi ts Models 422, 622 & 782 3A95
ST215 Doffer Drive Bearing; fi ts Models 214, 220, 314 & 320 5A65
ST225 Sealed Picker Drive Bearing on all Older Model Pickers 3A95
ST247 Horizontal Shaft Gearbox Bearing; fi ts Models 422, 622 & 782 3A95
ST287Doffer Adjustment Screw Bearing on Models 422, 622, 782 & 1844. Also fi ts Doffer Drive Upper Shaft on 1822 &1844 Models.
4A95
ST533 Spindle Drive Bearing on Older Models 214, 220, 314, 320, 422, 622 & 782 4A90
ST719 (Substitute for ST546) Top Spindle Drive Bearing on 422, 622 & 782 Models 4A95
201118C91 Cam Center Bearing on Drum Rotor and Drive Cam on Models 1822 & 1844 16A95
209717C91Spindle Gear Needle Bearing on Picker Bar on Models 1822 & 1844; Made in the USA
1A45
220355C1 Upper Picker Bar Seal for Models 1822 &1844 0A85
372070R91(Substitute for 216585C91) Thrust Bearing on Picker Bar &. Spindle on Models 1822 &1844; Made in the USA
1A10
216581C1 Thrust Washer used with 372070R91 Thrust Bearing (see above); Made in the USA 1A25
584148R91 OR 223826R91 Drum Drive Shaft Bearing on Drum Rotor and Drum Cam on Models 1822 & 1844 7A50
566632R92 Upper Auxiliary Drum Idler Shaft Bearing on Models 1822 &1844 7A40
587015R92 OR 156359C91 Lower Auxiliary Drum Idler Shaft Bearing on Models 1822 & 1844 7A75
665420R91 Double Chain Idler Sprocket Bearing on Models 422, 622, 782; Made in the USA 3A10
662519R91 Doffer Drive Shaft Bearing on Models 1822 & 1844 7A95
666624R91-USARotor Drive and Rear Spindle Idler Sprocket Bearing on Models 622, 782, 1822 & 1844; Made in the USA
7A50
666624R91 Same as above - Import Bearing 2A25
669807R91Lower Pedestal Bearing on Drum Rotor and Drive Cam and Lower Doffer Shaft Bearing on Models 1822 &1844; Made in the USA
12A90
536053R91 Outer Cone Bearing on Gear Box on Models 1822 & 1844; Made in the USA 5A98
536054R91 Outer Cup Bearing on Gear Box on Models 1822 & 1844; Made in the USA 2A70
618023R91 OR G57452 Lower Cone Bearing on Gear Box on Models 1822 & 1844; Made in the USA 6A07
618024R91 OR G57451 Lower Cup Bearing on Gear Box on Models 1822 & 1844; Made in the USA 2A95
642955R91Outer Cone Bearing on Gear Box on Models 1844 Drum 2 & 3; Drum Drive Bearing Inner on Models 1822 & 1844; Made in the USA
5A75
642954R91Outer Cup Bearing on Gear Box on Models 1844 Drum 2 & 3; Drum Drive Bearing Inner Cup on Models 1822 & 1844; Made in the USA
2A99
For Models 422, 622, 782, 1822 & 1844
PAGE 70 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Replacement Bearings for John Deere Balers
Part # Description Ref. No.
COMPLETE BEARING ASSEMBLY FOR DRIVE AND IDLER ROLLERS
Replacement for JD Number AE74652 which is sub for AE54574. Fits round balers models 385, 435, 456, 466, 467, 535, 566, 557, and 567.
Agri Part #BP13043-A Timken® Brand. Made in USA. 67A50
REPLACEMENT BEARING FOR BP13043-A ABOVE ASSEMBLY
Agri Part #210RRB6 Timken® Brand. Made in USA. 33A25
Agri Part #HPS108GPB-I Agri Brand, Import 19A20
STARTER AND PICKUP DRIVE ROLLER BEARING 1” HEX BORE FLAT OD
Replacement for JD #JD9338. Fits most round balers including 330, 335, 375, 385, 410, 430, 446, 456, 466, 467, 468, 535, 540 ,545, 556, 567, and 558.
Agri Part #206KRR6 Timken® Brand. Made in USA. 21A50
Agri Part #HPC100GP-I Agri Brand, Import 8A60
PICKUP FRAME SUPPORT BEARING 1” HEX BORE BEVELED OD
Replacement Bearing for John Deere #JD9313. Fits round balers including 385, 430, 435, 447, 456, 457, 458, 468, 468s, 530, 535, 556, 567, and 568.
Agri Part #206KRRB6 Timken® Brand. Made in USA. 18A50
Agri Part #HPS100GP-I Agri Brand, Import 8A40
PICKUP SUPPORT BEARING
Replacement Bearing for John Deere #AN102010.Fits round balers including models 330, 335, 375, 385, 430 ,435, 446, 456, 466, 467, 468, 535 ,555 ,556 ,558, 565, 575, 580, 582, and 590.
Agri Part #206KRRB6 Timken® Brand. Made in USA. 24A85
Agri Part #HPS102GPE-I Agri Brand, Import 13A25
MAIN DRIVE SHAFT BEARING FROM GEAR BOX BEARING
Replacement Bearing for John Deere #JD9420. Fits most round balers including 300, 400, and 500 series.
Agri Part #207KRRB17 Timken® Brand. Made in USA. 28A50
R.H. STARTER, LOWER GATE ROLLER BEARING
Replacement Bearing for John Deere # AE40895. Fits Most Round Balers Including 300, 400 and 500 Series.
Agri Part #209KRRB2 Timken® Brand. Made in USA. 38A95
Agri Part #HPS108GPH-I Agri Brand, Import 19A50
GATE, IDLER & STAGGERING ROLLER BEARING
Replacement Bearing for John Deere # AE46606. Fits Round Balers in Series 300, 400 and 500.
Agri Bearing #W208PP21 A Timken® Brand. Made in USA. 38A95
Agri Bearing #HPC104TPA-I Agri Brand, Import 19A50
MIDDLE TENSION ARM ROLLER BEARING
Replaces John Deere #AE53290. Fits most round balers.
Agri Part #HPC103TPA-I NTN Brand. Made in Japan. 26A58
PICKUP CYLINDER FOR JOHN DEERE BALER
Replaces John Deere #AFH204000 and old #AE46215. Fits models 385, 435, 446, 457, 535, 556, 567, and other models.
Agri Part #HPC103TPA-I 9A95
Call Toll Free 1-800-457-5348 PAGE 71AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Eddins Grain Cart Replacement Parts
Part # Replaces Eddins Part # Description Ref. No.
PARTS FOR 9” & 12” STANDARD ELEVATOR ASSEMBLY
AG 1-1/2” FB FBRG 4-Bolt Flange Bearing - 1-1/2” Bore 22A50
AG 1-1/2” BO BRG-1 1-1/2” Insert Bearing only for above 15A95
50 A26 - 2-1/4” E26TS50 26 Tooth 50 Chain - 2-1/4” Bore Sprocket for 9” Elevator 22A50
60 A22 - 2-1/4” E22TS60 22 Tooth 60 Chain - 2-1/4” Bore Sprocket for 12” Elevator 23A50
50 B28 - 1-1/2” E28TS50 28 Tooth 50 Chain - 1-1/2” Bore Sprocket for 9” Elevator 23A45
60 B28 - 1-1/2” E28TS60 28 Tooth 60 Chain - 1-1/2” Bore Sprocket for 12” Elevator 27A55
50 A17-Id. E17TS50 17 Tooth 50 Chain - Idler Sprocket for 9” Elevator 9A85
60 A15-Id. E15TS60 15 Tooth 60 Chain - Idler Sprocket for 12” Elevator 15A95
AG-50 T1 EC-50 Replacement Elevator Chain 50 for 9” Elevator 7A45
AG-60 T2 EC-60 Replacement Elevator Chain 60 for 12” Elevator 8A30
PARTS FOR BOTTOM AUGER ASSEMBLY
AG 1-1/2” PB PBRG Pillow Block Assembly for No. 500 Cart - 1-1/2” Bore 22A50
AG 1-1/2” FB FBRG 4-Bolt Flange Bearing - 1-1/2” Bore 22A50
PARTS FOR GEAR HOUSING ASSEMBLY
AG No. 14 GBC-744 Cup for Gear Housing (also part of Housing) - USA Bearing 4A66
AG No. 15 GBC-4222 Inner Cup for Gear Housing (also part of housing) - USA Bearing 3A45
AG No. 16 GBC-4221 Bearing only (used with GBC-4222) - USA Bearing 6A91
AG No. 17 GBC-743 Bearing only (used with GBC-744) - USA Bearing 8A52
AG No. 18 GBC-753 End Cover Cup only - USA Bearing 10A27
AG No. 19 GBC-752 Bearing for 1 5/8 Spline Gear Set - USA Bearing 21A70
AG No. 20 GBC-750 Seal Outer for Gear Housing 11A10
PARTS FOR WHEEL ASSEMBLY FOR 5-BOLT HUB
AG No. 21 IWBG-5 Inner Wheel Bearing Cone - USA Bearing 25A34
AG No. 22 IWBGR-5 Inner Wheel Bearing Cup - USA Bearing 13A00
AG No. 23 HS-5 Hub Seal 17A55
AG No. 24 OWBG-10 Outer Wheel Bearing Cone - USA Bearing 32A66
AG No. 25 OWBGR-10 Outer Wheel Bearing Cup - USA Bearing 21A38
PARTS FOR WHEEL ASSEMBLY FOR 10-BOLT HUB
AG No. 35 IWBG-10 Inner Wheel Bearing Cone - USA Bearing
AG No. 36 IWBGR-10 Inner Wheel Bearing Cup - USA Bearing
AG No. 37 HS-10 Hub Seal
AG No. 38 OWBG-10 Outer Wheel Bearing Cone - USA Bearing
AG No. 39 OWBGR-10 Outer Wheel Bearing Cup - USA Bearing
UNIVERSAL JOINTS FOR CARTS
AG-30 WFT-RK Repair Kit for Universal Joint 17A09
AG-31 WRK Repair Kit for Universal Joint 10A81
NOTE: These are Replacement Parts Only.
PAGE 72 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Catfi sh Pond Aerator Parts
BEARING KITS
Part # Applications Ref. No.
422BK Final drive-bull gear for drive line IH422 - Complete Bearing Kit 112A76
622BK Final drive-bull gear for drive line IH622 - Complete Bearing Kit 131A27
422TS Top side bearing kit for fi nal drive-bull gear for IH422 50A54
622TS Top side bearing kit for fi nal drive-bull gear for IH622 60A69
622BS Bottom side bearing kit for fi nal drive-bull gear for IH422 and IH622 76A45
CAST IRON PILLOW BLOCKS
Part # Applications Ref. No.
RAK 1-1/2”-V Value Line Pillow Block, 1-1/2” Bore 9A95
RAK 1-1/2” Agri Import Pillow Block, 1-1/2” Bore 15A95
RAK 1-1/2” USA Domestic Pillow Block, 1-1/2” Bore 60A53
DRIVELINES WITH SHIELDING FOR AERATORS
Part # Series Length Tractor Yoke Implement Yoke Ref. No.
14006424 4 48” 1-3/8” x 6 spl QD 1-1/2” 104A85
14006524 5 48” 1-3/8” x 6 spl QD 1-1/2” 130A44
14006624 6 48” 1-3/8” x 6 spl QD 1-1/2” 115A28
14016524 5 48” 1-3/8” x 21 spl QD 1-1/2” 152A25
14016624 6 48” 1-3/8” x 21 spl QD 1-1/2” 152A55
UHMW PLASTIC PILLOW BLOCKS
Part # Applications Ref. No.
RAK 1-1/2” PL 1-1/2” Pillow Block 41A64
RAK 2” PL 2” Pillow Block 41A64
Call Toll Free 1-800-457-5348 PAGE 73AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
IHC® Disk Harrow Replacement PartsParts for 470, 475, 480, 485, 490, and 496 Disks
AXLES
Part # Replaces IHC® Part # Description Ref. No.
1A140 468697R1 Axle 1-1/8” Square X 40-1/4” for Wings 21A55
1A141 652939R2 Axle 1-1/8” Square X 67.4 31A50
1A142 472586R2 Axle 1-1/8” Square X 71.9 32A50
1A129 468582R2 Axle 1-1/8” Square X 76.4 31A50
1A143 468583R2 Axle 1-1/8” Square X 79.4 34A50
MISCELLANEOUS ITEMS & HARDWARE
Part # Replaces IHC® Part # Description Ref. No.
1A131 468584R1 Casting Bumper Washer, Models 470-490 10A25
1A132 481611R1 Casting End Washer, Models 470-490 4A95
1A133 P34101 Gang Bolt Lock Washer 1A25
195495AG 195495A1Eye Bolt. Fits RMX 340, 370, and 3950 tandem disk. Replaces Case IH® #195495A1.
16A75
193907AG 193907A1
Replacement Bearing Housing for RMX 370,
MRX 690 Mulch Till Ripper, and 870 Eco Tiger
Disk Ripper.
21A75
SCRAPERS
Part # Replaces IHC® Part # Description Ref. No.
1A119 483139R91 480 Disc, Scraper Complete, Right Hand 14A25
1A120 483140R92 480 Disc, Scraper Complete, Left Hand 14A25
1A123 121120C2 490 & 496 Disk, Scraper Complete, Right Hand 12A95
1A124 121119C2 490 & 496 Disk, Scraper Complete, Left Hand 12A95
PAGE 74 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
IHC® Disk Harrow Replacement PartsParts for 470, 475, 480, 485, 490, and 496 Disks
Part #B91354 AGPart #B91354 Part #A224225 AGPart #B91353-AG
FITS 470-475, 480, 485, 490, EARLY 496, 500, 501, 610 AND 760 DISKS ONLY
Part # Replaces IHC® Part # Description Ref. No.
AGRI #465493 465493R1 Hub with Cups - Boxed 23A70
AGRI #478375 478375R1 Spindle for 465593 Hub - Boxed 13A25
A1103 69442D Spindle Washer Only 0A35
A1102 369857R1 Spindle Nut 0A89
AGRI #5 Kit 63881C91USA Bearing Kit for 465493Transport Wheel Hub
21A25
AGRI #B91354-AG B91354, 87428170Complete Hub Assembly with Hub, Spindle, Bearing Seals, and Hub Cap - Boxed
50A67
FITS 8 BOLT 6” PIVOT DIAMETER FOR IH® 3950 & SOME RMX370 APPLICATIONS
Part # Replaces IHC® Part # Description Ref. No.
AGRI #468-H 606468R21 Hub with Cups - Boxed 29A99
AGRI #468-S 1978726C1 Spindle for Hub 18A99
AGRI #6 Kit 123096A2 USA Bearing Kit - Boxed 29A85
AGRI #B91353-AG B91353, 87428171Complete Hub Assembly with Hub, Spindle, Bearing Seals, and Hub Cap - Boxed
72A94
FITS 8 BOLT 6” PIVOT DIAMETER FOR IH® 3950 & SOME RMX370 APPLICATIONS
Part # Replaces IHC® Part # Description Ref. No.
AGRI #160 Hub 87407202 Hub with Cups and Studs - Boxed 82A50
AGRI #160 427951A1 Spindle for Hub 57A55
AGRI #3950 Kit Complete Bearing Kit - Boxed 214A75
AGRI #224225-AG 224225A1Complete Hub Assembly with Hub, Spindle, Bearing Seals, and Hub Cap - Boxed
Call Toll Free 1-800-457-5348 PAGE 75AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
IHC® Disk Harrow Replacement PartsParts for 470, 475, 480, 485, 490, and 496 Disks
SPOOLS
Part # Replaces IHC® Part # Description Ref. No.
1A112 101189C1 1-5/8” Round Hole, New Style, 7-1/2” Spacing 4A95
1A113 101190C1 3” Round Hole, New Style, 9” Spacing 5A30
1A114 101191C1 4” Round Hole, New Style, 7-1/2” and 9” Spacing 5A95
1A115 472591R3 4” Square Hole, Old Style, 7-1/2” and 9” Spacing 5A25
1A116 472592R3 1-5/8” Square Hole, Old Style, 7-1/2” Spacing 4A25
1A117 472593R3 3” Square Hole, Old Style, 9” Spacing 4A95
1A111 481416R1 7-1/2” Square Hole, Old Style, 7-1/2” Spacing 11A75
1A118 481417R1 9” Square Hole, Old Style, 9” Spacing 10A85
SPOOLS
Part # Replaces IHC® Part # Description Ref. No.
1A125 652383R1 Sleeve, 5-1/16” Long 1A18
1A126 472594R1 Sleeve, 6-1/16” Long 1A95
1A127 652412R1 Sleeve, 7-1/4” Long 1A95
1A128 112410C1 Sleeve, 8-3/4” Long 1A99
PAGE 76 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Replacement Case IH® Disk Bearings & Flanged Disk Units
Detail of Max-A Seal part #ST491A-AG
Patent PendingMAX-A SEAL
Part # Replaces Part # Description Ref. No.
ST491A AG ST491A Agri Brand 1-3/4” Round Bore: fi ts 470, 480, 490, 3900, 3950 19A95
DHU491A AG ST491A Timken® Brand USA P.O.R.
FD209TTRJA ST491A NTN Brand 22A10
FD209RB-I IHC #ST3027 AGRI Brand 1-1/2” Round Bore 18A95
DHU 1-1/2” R209 AG IHC #ST3027 Timken® Brand USA P.O.R.
FD211RJA-I IHC #ST3012A AGRI Brand 1-15/16” Round Bore 29A95
DHU 1-15/16” C211 AG IHC #ST3012A Timken® Brand USA P.O.R.
FD211RB-I ST740B AGRI Brand 2-3/16” Round Bore: fi ts IH 500 & 501 Disk Case 770, MRX690 27A45
DHU 2-3/16” R211 AG ST740B Timken® Brand USA P.O.R.
Part # Description Ref. No.
129753AG Bearing Guard for ST491A Bearing 4A45
Agri Part # (Import) Ref. No. Timken® USA Ref. No. Replaces Part # Description
W208PP-5 8A95 W208PP5-AG 18A55 963889R91 1-1/8” Square Bore
W208PPB-5 8A95 W208PPB5-AG 18A99 630210R91 1-1/8” Square Bore
W208PP10 12A55 W208PP10-AG 32A70 H747303 1-1/2” Round Bore
W211PPB-3 14A90 W211PPB3-AG 46A50 630095R91 1-1/2” Square Bore
W209PPB-2 11A50 W209PPB2-AG 31A25 1251062C91 1-3/4” Round Bore
DC208TT-I 11A50 W208K3AG-AG 41A50 T16289 1-1/8” Square Bore
W208PPB-12 10A75 W208PPB12-AG 26A55 T28503 1-1/8” Square Bore
GW211PPB-3 15A75 GW211PPB3-AG 42A55 T51610 1-1/2” Square Bore
GW210PPB-2 12A90 GW210PPB2-AG 42A85 T53781 1-15/16” Round Bore
GW210PPB-5 14A95 GW210PPB5-AG 49A55 T54897 1-3/4” Round Bore
GW209PPB-4 11A98 GW209PPB4-AG 34A50 T57851 1-1/2” Round Bore
SBX1226 NTN 69A65 193906A1 44.95mm Round Bore
GW212PP-I 31A99 193906A1 44.95mm Round Bore
DC212TTRBN-I 37A55 409556A1 2.1874 Round Bore
SBX1227 NTN 131A55 NTN Brand 131A59 409556A1 2.1874 Round Bore
W211PPB-4 18A99 18A99 ST627A 2-3/16” Round Bore
Call Toll Free 1-800-457-5348 PAGE 77AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Replacement Case IH® Bearings & Housings
Part # Replaces Part # Description Ref. No.
885151E Case T26882, IHC526769R91 Long Stem Cultivator Bearing 5A50
885152 IHC128558C91 Short Stem Cultivator Bearing 5A50
WK2250 IHC140393C91 Packer Wheel Bearing 8A50
203-K ST620, 1969300C, 80437C91 Planter Bearing 4A55
203KKR-2 IHC666624R91 Rotary Hoe & Miscellaneous 2A25
203KKR2-AG USA IHC666624R91 Rotary Hoe & Miscellaneous 7A50
203KKR-5 611928R91 Planter & Disc Opener Bearing 4A95
203KKR5-AG USA 611928R92 Planter & Disc Opener Bearing 10A35
204BBAR 465003R91 Planter & Miscellaneous Bearing 3A95
205KR3 669807C91 Cotton Picker Bearing 5A95
204FREN, 204PY3 14516C91, 1258017C91, 493532R91 Disc Opener Bearing 4A95
204PY3-AG USA 1268017C91 Planter Bearing 5A95
204RRG6-AG USA 465003R91 Planter & Miscellaneous Bearing 6A25
205KRRB2 19529C91, 548928R91 Planter Bearing 8A45
205KRRB2-AG USA 19529C91 Planter Bearing 18A65
205KRRP2-AG USA 1337998C1 Planter Bearing 11A98
205RVA 1337998C1 Planter Bearing 4A95
88107 574428R91 Implement Bearing 8A50
88128R 662519R91 Implement Bearing 8A95
RAL012NPPB 165482C91 Planter & Combine Bearing 8A23
LM67010 651817R1, 652073R91 Timken® Wheel Bearing Cup 3A10
LM67048 651818R91, 652074R91 Timken® Wheel Bearing Cone 4A99
LM48510 144073C1, 618024R1, 671079R1 Timken® Wheel Bearing Cup 2A95
LM48548 140074C91, 618023R91, 671078R91 Timken® Wheel Bearing Cone 6A07
JLM506810 625743C1 Timken® Wheel Bearing Cup 10A30
JLM506849 625742C1 Timken® Wheel Bearing Cone 19A27
LM29710 1277608C1, 815213C1 Timken® Wheel Bearing Cup 5A15
LM29745 1277607C1, 815217C91 Timken® Wheel Bearing Cone 10A71
LM501310 21882890, 663558R1 Timken® Wheel Bearing Cup 3A65
LM501349 21871630, 663557R91 Timken® Wheel Bearing Cone 7A45
2720 17498D, 659921R1 Timken® Wheel Bearing Cup 7A04
2776 21871501 Timken® Wheel Bearing Cone 16A33
JLM104910 199955, 1957732C1 Timken® Wheel Bearing Cup 6A11
JLM104948 199954, 1957731C1 Timken® Wheel Bearing Cone 13A85
M12610 371883R1, 671082R91 Timken® Wheel Bearing Cup 2A91
M12649 371882R91, 671081R91 Timken® Wheel Bearing Cone 5A45
PAGE 78 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Servis Rhino Flail Shredder Replacement Parts
Part # Description Ref. No.
FYR-2”
Cutting Reel Assembly Drive Bearing. 4-bolt fl ange w/ 5/8” bolts. Fits models RC-15, RC-
18, and RC-20. Replaces Rhino #00726300. SKF Brand.
245A20
Cutting Reel Assembly Drive Bearing
Part # Description Ref. No.
22213E
Cutting Reel Assembly Drive Bearing, Insert Bearing Only for Center Mount Assembly. Fits models RC-25, RC-
100 series, 115, 118, 120, and 125. Replaces Rhino #00726708. SKF Brand.
158A50
Cutting Reel Assembly Drive Bearing • Insert Bearing Only for Center Mount Assembly
Part # Description Ref. No.
80X120X10
Seal used in center mount assembly bearing listed above, part #22213E.
Replaces Rhino #00726709. Timken® brand.
22A10
Seal For Center Mount Assembly for AboveBearing Part#22213E
Part # Description Ref. No.
5/5V750
Belt drive, banded belt. Fits models RC-15, RC-18, RC-20, RC-25, RC-
100 series, 115, 118, 120, and 125. Replaces Rhino #00724090.
Gates® brand only.
152A52
Belt Drive • Banded Belt
Part # Description Ref. No.
RCJT1-1/2-USA
Drive tube assembly fl ange bearing. Fits models RC-15,
RC-18, RC-20, RC-25, RC-100 series, 115, 118, 120, and 125.
Replaces Rhino #00724713. Timken® brand. USA only.
60A53
Drive Tube Assembly Flange Bearing
Call Toll Free 1-800-457-5348 PAGE 79AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Part # Description Ref. No.
Rhino #1 Kit
Wheel hub bearing kit for 5-bolt wheel hubs. Fits all models RC-15,
RC-18, RC-20, RC-25, RC-100 series, 115, 118, 120, and 125.
34A27
Wheel Hub Bearing Kit for 5-Bolt Wheel Hub
Part # Description Ref. No.
724714AG
Cutting Wheel Assembly - Shredder Knife, Short. Fits models
RC-15, RC-18, RC-20, RC-25, RC-100 series, 110, 118, 120, and 125. Replaces Rhino #00724214.
3A45
Cutting Wheel Assembly • Shredder Knife, Short
Servis Rhino Flail Shredder Replacement Parts
Part # Description Ref. No.
Rhino #2 Kit
Wheel hub bearing kit for 6-bolt wheel spindle assembly. Fits
models RC-100 series, 115, 118, 120, and 125.
31A55
Wheel Hub Bearing Kit for
6-Bolt Wheel Spindle Assembly
Part # Description Ref. No.
724710AG Busihing for above shredder knife. Replaces Rhino #00724210. 1A15
Bushing for Above Shredder Knife
Part # Description Ref. No.
720512AG Bolt for above shredder knife. Replaces Rhino #00720512. 1A79
Bolt for Above Shredder Knife
Part # Description Ref. No.
725916AG Nut for above shredder knife. Replaces Rhino #00725916. 0A20
Nut for Above Shredder Knife
PAGE 80 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Unverferth Ripper Stripper
Part # Description Ref. No.
64533AG
Complete hub for ripper stripper. Includes bearings, o-rings, triple
lip seal, and end cap.Replaces #64533.
34A27
Complete Hub for Ripper Stripper
Part # Description Ref. No.
83601AG Hub only for above. 18A90
Hub Only for Above
Part # Description Ref. No.
UNV #1Bearing kit only for #64533AG. Consists of 2 races, 1 sealed
bearing, 1 open bearing, & o-ring.17A75
Bearing Kit Only for #64533AG
Part # Description Ref. No.
UNV #3 Seal kit. Replaces #83958. Seal #C43LM67010 and o-ring. 3A75
Seal Kit
Part # Description Ref. No.
UNV #2Combo coulter sealed bearing kit. Replaces part #88420. Consists of
one sealed bearing and o-ring.9A25
Combo Coulter Sealed Bearing Kit
Part # Description Ref. No.
UNV #4
Combo coulter seal kit. Replaces kit #66683. Consists of sealed bearing, 2 o-rings, and triple lip
seal.
11A75
Combo Coulter Seal Kit
Part # Description Ref. No.
86263AGTriple lipped prelubed bearing assembly with collar. Fits both single and double baskets.
Comes with capscrews. 16A75
Rolling Harrow Basket Bearing Assembly
Call Toll Free 1-800-457-5348 PAGE 81AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Part # Description Ref. No.
ST491A-1-1/4 Rd.Basket bearing. 4-bolt riveted fl ange. 1-1/4”
round bore. Fits TF2, TF212, and TF215. Replaces J&M #ST4914-162-114.
22A85
Basket Bearing • 4-Bolt Riveted Flange •1-1/4” Round Bore
J&M Manufacturing
Torsion-Flex Soil Conditioners
Part # Description Ref. No.
JM #1Wheel bearing kit for above TF2, TF212,
TF215. Consists of 2 cups, 2 cones, and seal. Timken® brand.
23A45
Wheel Bearing Kit for Above TF2, TF212, TF215
PAGE 82 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Complete Bearing Assemblies for Disks, Levee PlowsRippper Stripper, and Strip-Till
Part # Description Ref. No.
FB090015AG
Complete bearing assembly for levee plow TJ3-F15 and F41 plow with Timken® bearings. Replaces
Amco #FB-09-0015.
77A55
FB090015-ISame assembly as above but with
import bearing. Agri brand.
52A70
Complete Bearing Assembly
Amco
Prime
Complete Bearing Assembly
Part # Description Ref. No.
1P501
Complete bearing assembly for Prime levee plows and Cane
cultivators. Also fi ts Midland disk harrows. Uses Timken® double
tapered roller bearing.
115A20
1P501-I Same as above with Agri brand tappered roller bearing. 82A50
1P500 Housing only. 32A50
Part # Description Ref. No.
17028AGBearing assembly for hipper with
1-1/2” axle.Timken® brand.
137A55
17028AG-I Same as above with Agri brand bearing. 78A40
Hipper Bearing Assembly
Call Toll Free 1-800-457-5348 PAGE 83AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Complete Bearing Assemblies for Disks, Levee PlowsRippper Stripper, and Strip-Till
Part # Description Ref. No.
Agri#907AG
Complete bearing assembly for RMX340 and 3950 fl ex wing
tandem. Includes housing, bearing, space, and snap ring. Replaces #193907A1 housing. Replaces
#193906A1 bearing. NTN brand bearing.
99A42
Agri #907AG-I
Same as above with Agri brand bearing. 65A86
Complete Bearing Assembly for
RMX340 & 3950 Flex Wing Tandem
Case-IH
KMC
Complete Bearing Assembly
Part # Description Ref. No.
1608100AG
Fits KMC Strip Till complete with bearing and snap ring.
Agri brand.Replaces #16-057-011.
45A50
16057011AGHub only for above. Replaces
#16-057-011.18A50
Part # Description Ref. No.
Agri#908AG
Complete bearing assembly for RMX 370, MRX 690 and 870 Eco-Tiger disk ripper. Includes housing, bearing, space, snap ring. Replaces
#193907A1 housing. Replaces #409556A1 bearing.NTN brand bearing.
165A19
Agri #908AG-I
Same as above with Agri brand bearing. 74A60
Complete Bearing Assembly for RMX 370,
MRX 690 & 870 Eco-Tiger Disk Ripper
PAGE 84 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Sunfl ower
Complete Bearing Assemblies for Disks, Levee PlowsRippper Stripper, and Strip-Till
Unverferth
Complete Hub for Ripper Stripper
Part # Description Ref. No.
Agri#64533AG
Complete hub for ripper stripper. Includes bearings,
o-rings, end cup, and triple lip seal.
38A50
83601AGHub only for above.Replaces #83601.
18A90
Trunion Bearing Assembly for
1232, 1300, 1400, and 1400 Series Disk
Part # Description Ref. No.
Agri#SN3090
Trunion bearing assembly for1232, 1300, 1400, and 1400 series disk. Also fi ts 4310,
4311, and 4360. Will also fi t same Amco, Blanton, & W.A. disks.
Timken® brand bearing.
79A88
Agri#SN3090-I
Same as above with Agri brand bearing.
55A80
Call Toll Free 1-800-457-5348 PAGE 85AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Replacement John Deere Parts
Part # Replaces J.D # Ref. No. Description
1A630 A15141 18A95 Bearing Housing
W208PP5 AG JD9350 16A95 Domestic Bearing for Housing (Requires 2)
W208PP-5 JD9305 8A95 Import Bearing for Housing (Requires 2)
1A631 A15142 2A25 Bearing Spacer 1 1/2” x 2” x 1”
1A633 32184 1A95 Retaining Ring for Bearing Housing
1A620 A15143 12A95 Hipper Axle - Also Replaces W & Y #478100 & Burch #402-0114
1A632 A16690 0A95 Replacement Axle Washer for John Deere Hipper
1A634 A13208 5A95 A13208Bumper Washer Heavy Duty
1A637 KK3745B 4A95 End Washer
1A635 A15144 4A95 Replacement John Deere Spool 4 1/2” x 2 1/4”
1A636 A15145 4A95 Replacement John Deere Spool 5 1/2” x 1 15/16”
Hipper Parts (Bedder)
1-1/8” Square Axle
Part # Replaces J.D # Ref. No. Description
1J500 A25694 4A50 Bumper Washer
1J502 N241315 6A65 Spool for Models with 7 1/4” & 9” Spacing
1J504 N241318 9A95 Spool for Models with 7 1/4” Spacing
1J506 N241314 11A70 Spool for Models with 9” Spacing
1J508 AN183629 18A97 Double Spool for Models with 9” Spacing
1J510 AN183748 16A90 Double Spool for Models with 7 1/4” Spacing
1J512 A20647 1A99 Sleeve for Models with 7 1/4” Spacing
1J514 A20648 2A35 Sleeve for Models with 9” Spacing
1J516 A37024 4A60 End Washer
1J518 34103 2A35 Slack Washer for Square Side
1J520 34102 2A35 Slack Washer for Round Side
1J522 A20006 5A95 Scraper Blade for Models 110, 111, 115, 270, 220, 230 & 630 Disks
1J523 A38364 6A50 Scraper Blade for Models 215, 235, 315, 630, 635, 637 Disks
1J530 A27616 27A50 Hub for 210-235 Disks
1J531 A24325 18A95 Spindle for 210-235 Disks
1J532 --- 29A80 Wheel Bearing Kit for 210-235 Disks
1J540 AN183318 23A75 Hub for 630 Disk
1J541 --- 36A55 Spindle for 630 Disk
1J542 --- 29A45 Wheel Bearing Kit for 630 Disk
Replacement John Deere Disk Parts
Models 100, 110, 111, 115, 210, 215, 220, 230, 235 & 630, 635, 640 & 650 Disks
PAGE 86 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
John Deere Part # Agri Part # Description Brand Ref. No.
A27002 205KRP2-AG Bearing for 7100-7200 Planter Timken® 11A98
A27002 205RVA-I Bearing for 7100-7200 Planter Import Agri 4A95
A30941 BK-30941 Disk Bearing Assembly Complete Agri 22A90
A30942 BK-30942 Disk Bearing Assembly Complete Agri 31A25
A3769 2B43769 Bushing for AA35638 Assembly Agri 4A36
AA21015 885154B Short Stem Bearing for 7000-7100 Canada 5A50
AA21480 204PY3 7000-7100-7300-1700 Bearing Timken® 5A95
AA21480 204FREN 7000-7100-7300-1700 Bearing Import Agri 4A95
AA22097 205KRRB-2-AG 7/8” Hex Bore Planter Bearing Timken® 18A65
AA22097 205KRRB-2 7/8” Hex Bore Planter Bearing Import Agri 8A45
AA28184 Agri #AA28184 1-3/4” Bore Disk Harrow Bearing Agri 17A97
AA28186 Agri #AA28186 2-3/16” Bore Disk Harrow Bearing Agri 19A50
AA28271 205KRR2-AG 7/8” Hex Bore Bearing Timken® 18A65
AA34132 203-K USA 7300 Planter Wheel Bearing NTN USA 11A27
AA34132 203-K I 7300 Planter Wheel Bearing Agri 4A55
AA34616 206KPR4-AG Row Marker for 750 Drill Timken® 19A50
AA34616 206KPR4-I Row Marker for 750 Drill Agri 9A85
AA35638 2B35638 AG Closing Wheel Bearing Assembly USA Timken®-NTN 19A85
AA35638 2B35638-I Closing Wheel Bearing Assembly Import Agri 10A75
AA35741 AA35741WB Gauge Wheel Bearing with Bushing Canada 8A95
AA38106 AA38106-Agri Gauge Wheel Bearing with Bushing Canada 8A95
AA38601 6006RK Row Cleaner Attachment Bearing Agri 10A95
AA59196 A59196 Agri Double Row Planter Bearing Agri 7A96
AA61722 203PP AG Planter Bearing Timken® 3A65
AB12603 Agri #2 Kit Disk Harrow Bearing Kit Complete Timken® 75A50
AB14028 Agri #3 Kit Disk Harrow Bearing Kit Complete Timken® 92A55
AN131668 885154B Short Stem Bearing with Groove Canada 5A50
AN142665 88107 Disk Bearing Agri 7A95
AN142670 203RR2 AG Drill Wheel Bearing Timken® 7A50
AN212132 5203KYY2 AG Closing & Gauge Wheel Bearing Timken® 14A50
AN212132 5203KYY2-I Closing & Gauge Wheel Bearing Agri 7A96
AN213072 Agri # AN213072 Closing Wheel Seal for 750 Drill Agri 2A20
AN21900 Agri # AN21900 Disc Opener Wear Sleeve Agri 1A75
AN281357 203RR2 AG Seeder & Planter Bearing Timken® 7A50
AN281357 203KRR2 Seeder & Planter Bearing Agri 2A25
AR26480 200855 Seal Timken® 10A96
B13294 Agri # B13294 Seal for Blade Hub 750 Drill Agri 2A45
B30418 205RRAN-I Bearing for 7100-7200 Planter Agri 6A95
JD10448 205TNK-I No Till Coulter Wheel Bearing Agri 5A95
JD7395 25580 Timken® Wheel Bearing Timken® 10A77
JD7418 25520 Timken® Wheel Bearing Timken® 6A99
Replacement John Deere PartsFor Balers, Disks, Hippers, No-Till Grain Drills, and Planters Bearings, Chain Assemblies, Hubs, Seals, Spindles, Disk & Planter Parts
Call Toll Free 1-800-457-5348 PAGE 87AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
John Deere Part # Agri Part # Description Brand Ref. No.
JD8187 LM67048 Tapered Roller Bearing Timken® 4A99
JD8225 LM67010 Tapered Roller Bearing Timken® 3A10
JD8237 LM501310 Tapered Roller Bearing Timken® 3A65
JD8253 L44610 Tapered Roller Bearing Timken® 2A35
JD8271 LM29710 Tapered Roller Bearing Timken® 5A15
JD8535 203PP AG Planter & No Till Bearing Timken® 3A65
JD8902 LM501349 Tapered Roller Bearing Timken® 7A45
JD8933 L44643 Tapered Roller Bearing Timken® 5A25
JD8935 L44649 Tapered Roller Bearing Timken® 5A25
JD8988 LM29749 Tapered Roller Bearing Timken® 10A71
JD9041 JLM104948 Drive Wheel Bearing for No Till Timken® 13A88
JD9065 L68149 Tapered Roller Bearing Timken® 5A80
JD9076 LM104949 Tapered Roller Bearing Timken® 10A81
JD9125 L68111 Tapered Roller Bearing Timken® 3A95
JD9170 LM104912 Drive Wheel Bearing for No Till Timken® 10A14
JD9214 203RR2 AG No Till Closing Wheel Bearing - USA Timken® 7A50
JD9214 203KRR2 No Till Closing Wheel Bearing Agri 2A25
JD9260 205KRRB2 AG Hex Bore Planter Bearing - USA Timken® 18A65
JD9260 205KRRB2-I Hex Bore Planter Bearing - Import Agri 8A45
JD9296 204RR6 Popular Planter Bearing - USA Timken® 6A25
JD9296 204BBAR-I Popular Planter Bearing - Import Agri 3A95
JD9350 W208PP5 AG USA Made Bedder Bearing Timken® 17A99
JD9350 W208PP-5 Bedder Bearing - Import Agri 8A95
Replacement John Deere Disk Hipper, Grain Drill & Planter Parts
Replacement John Deere Parts
Part # Description Ref. No.
Agri #2 Kit
1-1/4” Square Bore Double Tapered Roller Bearing with 2 Races and 2 Seals. Fits John Deere Disks
AWR, BF, BFT, BWA, BWS; Replacement for John Deere AB12603, JD8327, and B31312. Also Fits
Case-IH® and Kewanee Disks, and replaces 469384R91, 518819R91, and 469838R91.
75A50
Agri #3 Kit
1-1/2” Square Bore Double Tapered Roller Bearing with 2 Races and 2 Seals. Replacement for John
Deere® TW, TWA. Midland 840 and 950 Disks. Replacement for John Deere AB14028 Levee Plow
Disks, Cane Cultivators, Athens Plow, and Peerless. Replaces Prime #15850 Bearings.
92A55
Replacement Timken® Tapered Square Bore Bearing Kits for Disks & Levee Plows
PAGE 88 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Agri Part # Replaces J.D. Part # Description Models Ref. No.
AA43719 AI-7000 Herbicide/Insecticide Drive 7000-7100 4A95
AA28486 AI-7090 Wheel Drive 7100 4A95
AA20978 AI-7100 Seed Meter Drive 7000-7100 4A75
AA22372 AI-7105 Wheel Drive 7000 7A99
AA21484 AI-7110 Countershaft to Seed Transmission 7000-7100 4A95
AA21483 AI-7115 Seed Transmission Drive 7000-7100 5A65
AA21523 AI-7120 Dry Fertilizer Transmission 7000-7100 6A92
AA33048 AI-7125 Herbicide/Insecticide Drive 7200-7300 5A85
AA2795 AI-7130 Plateless Seed Meter 7200-7300 6A90
AA32250 AI-7135 Seed Transmission Drive 7200-7300 6A55
AA33060 AI-7140 Vacuum Seed Meter 7200-7300 6A90
AH131563 AI-7145 Wheel Drive 7300 9A99
AI-7150 Wing & Drive 7200-7300 5A50
AA37980 AI-7155 Wheel Drive 7200 9A89
M82326 AI-7160 Countershaft to Fertilizer Transmission 7200-7300 5A50
AA32257 AI-7165 Liquid or Dry Fertilizer Transmission 7200 5A95
AA32249 AI-7170 Countershaft to Seed Transmission 7200-7300 6A99
AA43718 AI-7175 Herbicide & Insect Drive Vacuum 7200-7300 6A90
AA43720 AI-7180 Roller Unit Drive 7200-7300 8A91
AA43721 AI-7185 Seed Meter Drive 1700 8A68
THESE SPROCKETS ARE MADE IN THE USA
Replacement John Deere Planter Chains - Fits 7000, 7100, 7200, & 7300 Max Emerge
Agri Part # Replaces J.D. Part # Description Ref. No.
AGRI-32729 AA32729 Drive Wheel Idler Sprocket 9A30
AGRI-32776 AA32776 Transmission Drive Wheel Idler Sprocket 9A70
Replacement John Deere Planter Idler Sprockets
Replacement John Deere Parts
Call Toll Free 1-800-457-5348 PAGE 89AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Replacement John Deere Disk No-Till Grain Drill
Part # Ref. No. Replaces John Deere # Description
Agri #38447 16A50 AA38447, AN2813591x10 Closing Wheel Assembly for
750
Closing Wheel
Part # Ref. No. Description
To Serial Number 5281 12”
2B35638Replaces J.D. #AA35638
10A75 Roller Bearing Assembly Kit Complete Components
To Serial Number 5282
203KRR2 (Import) 2A25 AN142670 Roller Bearing
203RR2 AG (USA) 7A50 AN142670 Roller Bearing
Components for Above
Part # Ref. No. Replaces John Deere # Description
6203-2R5 2A55 JD8535 Ball Bearing
203K 4A55 AA34132 Roller Bearing
2B43769 3A40 B43769 Bushing
Press Wheel
Part # Ref. No. Application
JD105-USA 29A40 Upper Drive Wall
JD104-USA 37A08 Lower Drive to Serial Number 26046 & Up
JD102-USA 34A82 Lower Drive to Serial Number 16549
JD103-USA 39A43 Lower Drive to Serial Number 16550-26045
Pre-Cut Planter Chain • USA
Part # Ref. No. Replaces John Deere # Description
JLM104948Timken® (Requires 2)
13A85 JD9041 Bearing Cone
LM104912Timken® (Requires 2)
10A14 JD9170 Bearing Cup
200855 (Requires 2) 12A86 AR26480 Seal
Closing Wheel
PAGE 90 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Replacement John Deere Disk Bearing Assembly (Import)
Our Replacement John Deere Disk Bearing Assemblies Are NOT Manufactured in China!
BK-30941Part # Description Bore Ref. No.
BK-30941-AGRIComplete Kit.
Fits John Deere Disks 210, 215, 220, 225, 230, 235, 621, 630, and 6371 3/4” 22A90
AGRI #AA28184 Bearing Only - Same as BCA® DS209TTR-13 17A97
AGRI #FL27172 Flange With Grease Fitting 4A65
AGRI #FL34792 Flange Without Grease Fitting 3A40
AGRI #AA33968 Gasket - Made in USA 0A50
AA30941 Bolts Bolts for Flange Assembly 1A50
BK-30942
Wear GuardPart # Description Ref. No.
28474-AG Fits John Deere discs 210, 215, 220, 230, 235, 621, 630, 635, 650, and 637. 4A45
Part # Description Bore Ref. No.
BK-30942-AGRIComplete Kit.
Fits John Deere Disks 310, 315, 330, 360, 375, 635, 640, 650, and 6372 3/16” 31A25
AGRI #AA28186 Bearing Only - Same as BCA® DS211TTR-20 17A97
AGRI #FL29784 Flange With Grease Fitting 4A65
AGRI #FL39169 Flange Without Grease Fitting 3A40
AGRI #AA36772 Gasket - Made in USA 0A50
AA30942 Bolts Bolts for Flange Assembly 1A50
Call Toll Free 1-800-457-5348 PAGE 91AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Part # Description Ref. No.
TS100 Consists of Tube, Spindle, and Bolt Kit 224A90
T10001 Tube Only 105A50
S10002 Spindle Only 52A50
BK10005 Bolt Kit Only 14A60
Agri Industrial’s tube and spindle kit will replace the John Deere #N189873 and #N240209
spindle on the 630 tandem disk wing and main wheel transport wheel.
Simply burn o! the damaged spindle from the frame and weld back the AGRI #T10001 tube in
its place. The next time you have a spindle break, just replace it with the AGRI #S10002 spindle.
Instead of replacing an expensive long spindle, you need only purchase one of Agri Industrial’s spindles.
YOU WILL NEVER HAVE TO BURN OR WELD AGAIN.
Agri Industrial’s also o! ers the wheel bearing kit, part #1J542, and the replacement hub, part
#1J540, which is a replacement for #AN183318 — both of these will " t part #S10002 spindle.
Replacement Tube and Spindle Kit for John Deere 630 Disk
Replacement Tube & Spindle Kit for John Deere 630 Disk
PAGE 92 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Cast Iron Closing Wheel
Part # Ref. No. Replaces John Deere # Description
To Serial Number 3834
203K 4A55 AA34132 Roller Bearing
AGRI JD8535-USA 3A65 JD8535 Ball Bearing
AGRI #213072 2A20 AN213072 Seal
To Serial Number 3834
AGRI JD8535 (USA) (Requires 2)
3A65 JD8535 Ball Bearing
AGRI #213072 2A20 AN213072 Seal
Part # Ref. No. Replaces John Deere # Description
5203KYY2 1A44 AB212132Exact OEM Replacement Ball
Bearing
Gauge Wheel
Disc Opener Hub
Part # Ref. No. Description
AGRI #44267 (USA)Timken® Only Bearing UsedReplaces JD #AA44267
24A90Complete Bearing Kit Includes: 2 Bearings, 2 Races, 2 Seals,
2 Wear Rings, O-Ring, and Cotter Ring.Also fi ts 1850 No-Till Air Drill.
Components for Above
Part # Ref. No. Replaces John Deere # Description
L44610 (USA) 2A35 JD8253 Race
L44643 (USA) 5A25 JD8933 Bearing
AGRI #13294 2A45 B13294 Triple Lip Seal
AGRI #219000 1A75 AN219000 Wear Sleeve
AGRI #210 0A50 B2762R O-Ring
AGRI #7023 0A25 11M7023 Cotter Pin
Part # Ref. No. Replaces John Deere # Description
AGRI #213544 16A50 AN213455 For 750 & 1850 Drills and Coulter
Gauge Wheel
Replacement John Deere Disk No-Till Grain Drill750 - No-Till Grain Drill
Call Toll Free 1-800-457-5348 PAGE 93AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Disc, Hipper & Levee Plow PartsAxles, Housings, Spools, Spacer & Components Parts
Part # Replaces OEM # Description Ref. No.
1A801 3416 Bearing Housing for 1-1/8” Axle 24A10
1A802 11005 Snap Ring for Housing 2A65
1A803 3180 2-1/2” x 4” Spool 5A79
1A804 3181 3-1/2” x 4 7/8” Spool 7A55
1A805 2030 End Washer 8A50
1A806 2116 Lock Plate A95
1A807 --- 1-1/8” Gang Axle, Includes Nut & Washer 14A95
Amco Hipper with 1-1/8” Axle
Part # Replaces OEM # Description Ref. No.
1A821 17028 Bearing Housing for 1-1/2” Axle 37A00
1A822 11064 Snap Ring for Housing 3A25
1A823 17029 Long Spool 12A60
1A842 17027 Short Spool 10A45
1A825 1222A End Washer 10A99
1A826 9578A Bumper Washer 14A50
1A827 20561 15-1/8” Long Axle 1-1/2” Square 37A55
Amco Hipper with 1-1/2” Axle
Part # Replaces OEM # Description Ref. No.
1A831 16003 Bearing Housing 19A90
1A832 11064 Snap Ring 3A25
1A833 17007 Long Spool for 1-1/2” Square Axle 14A60
1A834 17006 Short Spool for 1-1/2” Square Axle 16A00
1A835 1222A End Washer 10A99
1A836 9578A Bumper Washer 13A60
1A837 0522 Double Spool 20A90
1A838 9440 33-3/4” Long Axle 1-1/2” Square 63A80
1A839 9577A1-1/2” Machined Axle Nut for 1A806 Washer; fi ts inside Bumper Washer
18A25
Amco Levee Plow Parts with 1-1/2” Axle
PAGE 94 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Disc, Hipper & Levee Plow PartsAxles, Housings, Spools, Spacer & Components Parts
Part # Replaces OEM # Description Ref. No.
1A851 16003 Bearing Housing 19A90
1A852 11064 Snap Ring 3A25
1A853 17009 Small Bell End 5-1/2” x 4-1/2” 14A75
1A854 17010 Large Bell End 11A80
1A855 2404 Bumper Washer 8A70
1A825 1222A End Washer 10A99
1A856 0522 Double Spool 20A95
Amco Disc Harrow • For 1-1/2” Axle F-15 Series and Others
Part # Replaces OEM # Description Ref. No.
1A401 2764 Bearing Housing 28A50
1A402 2763 Snap Ring A96
1A405 2765 Bearing Spacer 2A75
1A406 2761 Convex Spool 5A75
1A407 2766 Concave Spool 5A75
1A408 2767 End Washer 4A90
1A409 2758 Bumper Washer 5A95
1A410 2757 1-1/8” Axle x 12” Long with Nut & Washer 12A75
Forrest City Hipper 1-1/8”
Part # Replaces OEM # Description Ref. No.
1A701 201306 Bearing Housing 22A44
1A702 200881 Bearing Spacer 2A75
1A703 478020 Bumper Washer 9A45
1A704 201492 1-7/8” Tall x 4-5/16” O.D. Convex Spacer 5A90
1A705 201493 2-3/16” Tall x 4-13/16” O.D. Convex Spacer 5A68
1A706 201494 1-3/8” x 4-1/4” O.D. End Washer 5A55
1A707 478100 Axle 1-1/8” x 12-1/2” with Nut & Washer 9A25
W & A Hipper 1-1/8” Axle
Call Toll Free 1-800-457-5348 PAGE 95AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Kelly/KMC Parts
Part # Replaces OEM # Description Ref. No.
1A450 06-057-013 Bearing Housing 28A00
1A451 06-050-001 Snap Ring for Housing 1A65
1A452 06-024-006 Bearing Spacer 3A49
1A453 06-057-005 End Washer 4A65
1A454 06-057-002 Bumper Washer 12A92
1A455 06-057-003 Convex Spool 8A90
1A456 06-057-004 Concave Spool 8A90
1A457 06-057-009 1-1/8” Axle x 12” Long 18A42
W208PP5-1 06-051-001 Gang Bearing for 06-057-013 Import 8A95
W208PP5 AG 06-051-001 Gang Bearing for 06-057-013 USA 18A55
KMC Part # Description Ref. No.
02-051-025 Sub 33-051-002 USA 1-3/4” Bore Bearing Timken® USA 97A99
02-051-026 USA 1-3/4” Hex Bore Bearing USA 83A89
02-051-026 Import 1-3/4” Hex Bore Import 43A95
02-051-048 Sub to 33-051-065 USA 1-15/16” Bore Bearing Timken® Triple Lip 54A25
02-051-048 Sub to 33-051-065 Import 1-15/16” Bore Bearing Import Triple Lip 25A90
KMC Rototiller Bearings
PAGE 96 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Miscellaneous Parts
4-Bolt Flange
Part # Alloway Part # Description Ref. No.
Agri #50530001 505-3-0001 Side Knife N/A
Agri #50530014 505-3-0014 U-Bar Clevis 1A60
Agri #50530008 505-3-0008 D-Ring 1A60
Alloway 1-15/16” 505-2-0492 4-Bolt Flange Bearing with triple lip seals 36A55
G1115KRRB3 Triple Lip Bearing for Above Flange Bearing 22A50
F2029 Do All Leaf Board Spring Assembly - Fits John Deere & Forest City Finishing Harrows 15A90
Alloway Flail Chopper Parts
Side Knife U-Bar Clevis D-Ring
Part # J.D. & Case IH NH Part # Description Ref. No.
Agri #A85252 A85252 8 Tooth Hex Bore Sprocket 7A99
Agri #AH101219 AH101219 Idler Sprocket 8 Tooth Greaseable 7A99
Agri #AN102448 AN102448 Idler Sprocket 8 Tooth Non-Greaseable 7A99
Agri #CHC-100JD AN102009Case IH #IH176279NH #610831
Gathering Chain Endless 18A99
Corn Head Gathering Chain & Sprockets
See page 177 for Corn Head Combine Drive Lines
Call Toll Free 1-800-457-5348 PAGE 97AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Hub with Spindles & Component PartsHubs are Assembled with Cups
Part # Description Ref. No.
HUB #100 4 Stud 5” Bolt Circle 3.62” Pilot DiameterReplaces EWC Q633; Same as Wilton #280501
23A81
Spindle #100 Spindle for Hub #280700 12A50
Replacement Bearings & Seals
Part # Description Ref. No.
LM67010 Timken® Inner Bearing Cup 3A10
LM67048 Timken® Inner Bearing Cone 4A99
LM11910 Timken® Outer Bearing Cup 2A45
LM11949 Timken® Outer Bearing Cone 3A99
204013 National® Grease Seal 3A90
909911 Dust Cap 1A95
Hub #100 - 1500 lb. Capacity
Part # Description Ref. No.
HUB #105 5 Stud 5.5” Bolt Circle 4” Pilot DiameterReplaces French & Hecht #25-5 and 104683;
Hub Assembly with Cups and Studs; Same as Wilton #281011
19A65
Spindle #105 Spindle for Hub #281210 21A50
Replacement Bearings & SealsPart # Description Ref. No.
LM48510 Timken® Inner Bearing Cup 2A95
LM48548 Timken® Inner Bearing Cone 6A07
LM67010 Timken® Outer Bearing Cup 3A10
LM67048 Timken® Outer Bearing Cone 4A59
204038 National® Grease Seal 6A30
909905 Dust Cap 1A99
Hub #105 - 2500 lb. Capacity
PAGE 98 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Hub with Spindles & Component PartsHubs are Assembled with Cups
Part # Description Ref. No.
HUB #110 6 Stud 6” Bolt Circle 4.62” Pilot DiameterReplaces French & Hecht #30-6 and 106749; Hub Assembly with Cups and Studs;
Same as Wilton #281031
24A40
Spindle #110 Spindle for Hub #281230 17A72
Replacement Bearings & SealsPart # Description Ref. No.
LM29710 Timken® Inner Bearing Cup 5A15
LM29749 Timken® Inner Bearing Cone 7A45
LM67010 Timken® Outer Bearing Cup 3A10
LM67048 Timken® Outer Bearing Cone 4A99
204038 National® Grease Seal 8A49
909905 Dust Cap 1A99
Hub #110 - 2500 lb. Capacity
Part # Description Ref. No.
HUB #120 6 Stud 6” Bolt Circle 4.62” Pilot DiameterReplaces French & Hecht #35-6 and 106164;
Same as Wilton #281041
23A50
Spindle #120 Spindle for Hub #281230 17A72
Replacement Bearings & SealsPart # Description Ref. No.
LM501310 Timken® Inner Bearing Cup 3A65
LM501349 Timken® Inner Bearing Cone 7A45
LM67010 Timken® Outer Bearing Cup 3A10
LM67048 Timken® Outer Bearing Cone 4A99
204508 National® Grease Seal 8A49
909905 Dust Cap 1A99
Hub #120 - 3500 lb. Capacity
Call Toll Free 1-800-457-5348 PAGE 99AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Hub with Spindles & Component PartsHubs are Assembled with Cups
Part # Description Ref. No.
HUB #130 6 Stud 6” Bolt Circle 4.62” Pilot DiameterReplaces EWC Q803
Same as Wilton #280581
26A55
Spindle #130 Spindle for Hub #280731 20A18
Replacement Bearings & SealsPart # Description Ref. No.
25520 Timken® Inner Bearing Cup 6A99
25590 Timken® Inner Bearing Cone 10A15
25821 Timken® Outer Bearing Cup 6A42
25877 Timken® Outer Bearing Cone 9A92
204506 National® Grease Seal 7A70
909982 Dust Cap 2A50
Hub #130 - 4910 lb. Capacity
Part # Description Ref. No.
HUB #140 6 Stud 6” Bolt Circle 4.62” Pilot DiameterReplaces EWC Q888
Same as Wilton #280551
19A90
Spindle #140 Spindle for Hub #280720 23A50
Replacement Bearings & SealsPart # Description Ref. No.
JL69310 Timken® Inner Bearing Cup 2A90
JL69349 Timken® Inner Bearing Cone 5A89
LM67010 Timken® Outer Bearing Cup 3A10
LM67048 Timken® Outer Bearing Cone 4A99
204500 National® Grease Seal 6A29
909905 Dust Cap 1A99
Hub #140 - 3560 lb. Capacity
PAGE 100 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Replacement Hubs & Spindles for Various Farm Applications
Part # Description Ref. No.
HUB #150 6 Stud 6” Bolt Circle 4.62” Pilot Diameter Fits Do-Alls for John Deere, IHC,
Willrich and others.
18A90
Spindle #150 Spindle for Hub #281220 23A50
Replacement Bearings & SealsPart # Description Ref. No.
LM29710 Timken® Inner Bearing Cup 5A15
LM29749 Timken® Inner Bearing Cone 10A71
LM67010 Timken® Outer Bearing Cup 3A10
LM67048 Timken® Outer Bearing Cone 4A99
204500 Timken® Grease Seal 6A13
909905 Dust Cap 1A95
Do - All Hubs Spindles & Components
Part # Description Ref. No.
HUB #160 8 Stud 8” Bolt Circle 6” Pilot DiameterReplacement Hub fi ts Case IH 3950 Disk
Replaces Hub # 87407202
82A50
Spindle #160 Spindle for Hub Replaces 427951A1 54A55
Replacement Bearings & SealsPart # Description Ref. No.
JLM506810 Timken® Inner Bearing Cup 10A30
JLM506849 Timken® Inner Bearing Cone 19A27
LM501310 Timken® Outer Bearing Cup 3A65
LM501349 Timken® Outer Bearing Cone 7A45
200851 National® Grease Seal 5A65
909912 Dust Cap 2A92
Case IH 3950 Hub, Spindle & Components
Call Toll Free 1-800-457-5348 PAGE 101AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Chain No. Ref. No. A. B. C. Conn. Link Ref. No. Offset Link Ref. No.
RC40NP 19A70 1/2” .463” 5/16” CL40NP 0A61 OL40NP 1A51
RC50NP 29A32 5/8” .579” 3/8” CL50NP 0A79 OL50NP 1A71
RC60NP 35A66 3/4” .673” 1/2” CL60NP 1A05 OL60NP 1A93
Nickle Plated
Chain No. Ref. No. A. B. C. Conn. Link Ref. No. Offset Link Ref. No.
RC40SS 71A76 1/2” .463” 5/16” CL40SS 1A11 OL40SS 1A83
RC50SS 99A98 5/8” .579” 3/8” CL50SS 1A89 OL50SS 2A45
RC60SS 105A55 3/4” .673” 1/2” CL60SS 2A98 OL60SS 4A94
Stainless Steel “304” Series
Chain No. Ref. No. A. B. C. Conn. Link Ref. No. Offset Link Ref. No.
RC25 11A39 1/4” .230” 1/8” CL25 0A42 OL25 A72
RC35 10A89 3/8” .340” 3/16” CL35 0A32 OL35 0A42
RC40 9A85 1/2” .463” 1/4” CL4O 0A36 OL40 0A48
RC41 8A18 1/2” .386” 5/16” CL41 0A30 OL41 0A49
RC50 15A99 5/8” .579” 3/8” CL50 0A36 OL50 0A66
RC60 23A50 3/4” .673” 1/2” CL60 0A44 OL60 0A81
RC80 42A08 1” .935” 5/8” CL80 0A87 OL80 1A61
RC100 79A92 1-1/4” 1.165” 3/4” CL100 1A99 OL100 2A87
RC120 98A50 1-1/2” 1.378” 1” CL120 2A69 OL120 4A69
RC140 124A50 1-3/4” 1.661” 1” CL140 3A52 OL140 6A31
RC160 130A10 2” 1.898” 2” CL160 4A91 OL160 8A32
Single Strand
ANSI Import Roller Chain10 Feet Per Box • Chain is also available in reels • Ask your AGRI Industrial Supply Representative about Cut-To-Length sizes.
PAGE 102 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
ANSI Import Roller Chain10 Feet Per Box • Chain is also available in reels • Ask your AGRI Industrial Supply Representative about Cut-To-Length sizes.
Chain No. Ref. No. A. B. C. Conn. Link Ref. No. Offset Link Ref. No.
RC50-H 24A56 5/8” .579” 3/8” CL50H 0A55 OL50H 0A98
RC60-H 29A55 3/4” .673” 1/2” CL60H 0A71 OL60H 1A15
RC80-H 53A39 1” .935” 5/8” CL80H 1A04 OL80H 2A20
RC100-H 117A81 1-1/4” 1.165” 3/4” CL100H 3A05 OL100H 3A71
RC120-H 139A00 1-1/2” 1.376” 1” CL120H 3A73 OL120H 5A99
Heavy Duty
Chain No. Ref. No. A. B. C. Conn. Link Ref. No. Offset Link Ref. No.
RC35-2 18A90 3/8” .340” .188” CL35-2 0A55 OL35-2 0A97
RC40-2 26A55 1/2” .463” .313” CL40-2 0A61 OL40-2 1A25
RC50-2 42A50 5/8” .579” .375” CL50-2 0A91 OL50-2 1A44
RC60-2 48A55 3/4” .673” .500” CL60-2 1A25 OL60-2 2A15
RC80-2 84A30 1” .935” .625” CL80-2 1A85 OL80-2 3A05
RC100-2 156A50 1-1/4” 1.165” .750” CL100-2 2A99 OL100-2 4A55
Double Strand
Call Toll Free 1-800-457-5348 PAGE 103AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
ANSI Import Roller Chain10 Feet Per Box • Chain is also available in reels • Ask your AGRI Industrial Supply Representative about Cut-To-Length sizes.
Chain No. Ref. No. A. B. C. Conn. Link Ref. No. Offset Link Ref. No.
A2040 7A99 1” .463” 5/16” CLA2040 0A35 OLA2040 0A55
A2050 12A88 1-1/4” .593” 3/8” CLA2050 0A50 OLA2050 0A66
A2060 16A70 1-1/2” .683” 1/2” CLA2060 0A69 OLA2060 0A93
Extended Pitch
Chain No. Ref. No. A. B. C. Conn. Link Ref. No. Offset Link Ref. No.
C2060-H 38A87 1-1/2” .683” 1/2” CL2060H 0A99 OL2060H 1A65
C2062-H 38A87 1-1/2” .683” 1/2” CL2062H 1A59 OL2062H 2A60
C2080-H 54A22 2” .935” 2” CL2080H 2A40 OL2080H 5A20
CA550 56A55 1.63” 3/4” 51/64” CL550 1A45 OL550 2A07
CA557* 56A55 1.63” 3/4” 51/64” CL557 1A95 OL557 2A45
CA620 59A60 1.654” 3/4” 63/64” CL620 1A95 OL620 4A93
* .007 Roller Diameter
Conveyor Chain
PAGE 104 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
USA Roller Chain10 Feet Per Box • Chain is also available in reels • Ask your AGRI Industrial Supply Representative about Cut-To-Length sizes.
Chain No. Ref. No. A. B. C. Conn. Link Ref. No. Offset Link Ref. No.
35-USA 45A43 3/8” .340” 3/16” CL35-USA 0A97 OL35-USA 1A51
40-USA 37A87 1/2” .463” 1/4” CL40-USA 0A99 OL40-USA 2A21
41-USA 42A00 1/2” .386” 5/16” CL41-USA 1A01 OL41-USA 2A93
50-USA 46A43 5/8” .579” 3/8” CL50-USA 1A16 OL50-USA 2A14
60-USA 59A00 3/4” .673” 1/2” CL60-USA 1A35 OL60-USA 2A69
80-USA 116A43 1” .935” 5/8” CL80-USA 2A72 OL80-USA 6A14
100-USA 202A15 1-1/4” 1.165” 3/4” CL100-USA 4A23 OL100-USA 9A36
120-USA 302A00 1-1/2” 1.378” 1” CL120-USA 5A10 OL120-USA 14A41
Single Strand
Chain No. Ref. No. A. B. C. Conn. Link Ref. No. Offset Link Ref. No.
60H-USA 84A71 3/4” .673” 1/2” CL60H-USA 2A64 OL60H-USA 4A71
80H-USA 172A70 1” .935” 5/8” CL80H-USA 3A91 OL80H-USA 7A69
100H-USA 268S57 1-1/4” 1.165” 3/4” CL100H-USA 5A16 OL100H-USA 10A65
Heavy Duty
Call Toll Free 1-800-457-5348 PAGE 105AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
USA Roller Chain10 Feet Per Box • Chain is also available in reels • Ask your AGRI Industrial Supply Representative about Cut-To-Length sizes.
Chain No. Ref. No. A. B. C. Conn. Link Ref. No. Offset Link Ref. No.
40-2-USA 120A29 1/2” .463” .313” CL40-2-USA 1A65 OL40-2-USA 4A51
50-2-USA 130A15 5/8” .579” .375” CL50-2-USA 1A92 OL50-2-USA 5A59
60-2-USA 204A71 3/4” .673” .500” CL60-2-USA 3A04 OL60-2-USA 6A26
80-2-USA 377A00 1” .935” .625” CL80-2-USA 5A00 OL80-2-USA 13A39
Double Strand
Chain No. Ref. No. A. B. C. Conn. Link Ref. No. Offset Link Ref. No.
A2040 53A71 1” .462” 5/16” CLA2040-USA 1A35 OLA2040-USA 2A11
A2050 37A71 1-1/4” .593” 3/8” CLA2050-USA 1A65 OLA2050-USA 2A52
A2060 78A99 1-1/2” .683” 1/2” CLA2060 OLA2060-USA
Extended Pitch
Connecting Link Ref. No.
#1 Chain Breaker - Cuts #25 - 60 Chain 12A95
#2 Chain Breaker - Cuts #60 - 100 Chain 22A50
#1 Chain Breaker Tip 1A95
#2 Chain Breaker Tip 2A35
Chain Breakers
PAGE 106 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Part No. Ref. No. Links Per 10’ (3048 mm) A. B. C.
25 26A46 133 45/64” .422” .904”
32 27A39 104 15/16” .594” 1.157”
32W 27A70 104 1-1/16” .594” 1.157”
33 29A85 86 15/16” .610” 1.394”
42 32A46 87 1-7/32” .781” 1.375”
50H 46A23 87 1-9/32” .781” 1.375”
51 34A00 106 1-3/32” .703” 1.133”
52 32A31 80 1-13/32” .844” 1.508”
55 (45) 45A78 74 1-9/32” .796” 1.630”
62 44A46 73 1-9/16” .984” 1.654”
62A 79A99 72 1-15/16” .984” 1.664”
62H 54A62 73 1-7/8” .984” 1.654”
67H 69A90 52 1-7/9” 1.093” 2.313”
67XH 83A15 52 1-7/8” 1.093” 2.313”
67W 43A55 52 2-3/8” 1.093” 2.313”
S 36A99 41 1-15/16” 1.093” 2.906”
72 55A73 73 1-15/16” 2.025” 2.313”
Steel Detachable ChainAll Chain Come in 10 Foot Lengths • Shrink Wrapped
Call Toll Free 1-800-457-5348 PAGE 107AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Replacement Chain & Sprockets for John Deer PlantersRoller Chain Assemblies, Drive Wheel, & Transmission Drive Idler Sprockets for
\John Deere 7000, 7100, 7200, 7240, 7300, & 7340 Planters • Also Fits Kinze
John Deere Part # Agri Part # Description Models Ref. No.
AA43719 AI-7000 Herbicide/Insecticide Drive 7000-7100 4A95
AA28486 AI-7090 Wheel Drive 7100 7A65
AA20978 AI-7100 Seed Meter Drive 7000-7100 4A95
AA22372 AI-7105 Wheel Drive 7000 7A99
AA21484 AI-7110 Countershaft to Seed Transmission 7000-7100 4A95
AA21483 AI-7115 Seed Transmission Drive 7000-7100 5A65
AA21523 AI-7120 Dry Fertilizer Transmission 7000-7100 6A92
AA33048 AI-7125 Herbicide/Insecticide Drive 7200-7300 5A85
AA42795 AI-7130 Plateless Seed Meter 7200-7300 6A90
AA32250 AI-7135 Seed Transmission Drive 7200-7300 6A55
AA33060 AI-7140 Vacuum Seed Meter 7200-7300 6A99
AH131563 AI-7145 Wheel Drive 7300 9A99
AI-7150 Wing & Drive 7200-7300 5A50
AA37980 AI-7155 Wheel Drive 7200 9A89
M82326 AI-7160 Countershaft to Fertilizer Transmission 7200-7300 5A50
AA32257 AI-7165 Liquid or Dry Fertilizer Transmission 7200 5A95
AA32249 AI-7170 Countershaft to Seed Transmission 7200-7300 6A99
AA43718 AI-7175 Herbicide & Insect Drive Vacuum 7200-7300 6A90
AA43720 AI-7180 Roller Unit Drive 7200-7300 8A91
AA43721 AI-7185 Seed Meter Drive 1700 8A68
John Deere Part # Agri Part # Description Ref. No.
AA32729 AGRI-32729 Drive Wheel Idler Sprocket 9A30
AA32776 AGRI-32776 Transmission Drive Wheel Idler Sprocket 9A70
Sprockets • Made in the USA
Import Chain
PAGE 108 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Part # Description Ref. No.
IH400-USA Plate Drive Chain 11A59
IH401-USA Output Speed Chain 16A10
IH402-USA Input Speed Chain 19A23
IH403-USA Primary Wheel Drive Chain 27A66
IH404-USA Chemical Box Drive Chain 27A63
IHC Planter Chain Assemblies for 800 & 900 Planters • USA Chain
Part # Description Ref. No.
Hi-Cycle #1 Replaces 6000 John Deere Hi-Cycle Sprayer Chain 10A04
AH66615 13-Pitches USA Chain fi ts John Deere Cotton Pickers 16A08
AN102383AFits John Deere Coupling Chainr14 Tooth Sprocket Coupler; fi ts combines 3300, 4400, 4420, 6600, 6620, 7700, 7720, 8820, 9400, 9410, 9500, 9510, 9600, 9610; also 40 and 90 Series Corn Head
13A50
Replacement Parts for John Deere • Made in the USA
Part # Description Ref. No.
DC #101-USA Levco Ditcher - Same as HDA13 160A84
DC #102-USA Glencoe Ditcher 154A89
DC #103-USA Amco Ditcher 186A23
DC #104-USA Levco Ditcher - Same as OSQ-13 331A39
DC #105-USA Sidewinder 152A11
DC #106-USA United Farm Tool 108A50
Ditcher Chain • Made in the USA
Part # Description Ref. No.
DC #201-Import Levco Ditcher - Same as HDA13 38A92
DC #202-Import Glencoe Ditcher 39A88
DC #203-Import Amco Ditcher 42A50
DC #204-Import Levco Ditcher - Same as OSQ-13 69A77
DC #205-Import Sidewinder 38A99
DC #206-Import United Farm Tool 46A55
Ditcher Chain • Import
Miscellaneous Chain Assemblies
Call Toll Free 1-800-457-5348 PAGE 109AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Idler Sprockets
Cast Idler Sprockets & PulleysWith Hardened Teeth
Part # Chain Size Teeth Bore Size Ref. No.
IS35A18x1/2” 35 18 1/2” 11A89
IS35A18x5/8” 35 18 5/8” 11A89
IS40A17x1/2” 40 OR 41 17 1/2” 8A20
IS40A17x5/8” 40 OR 41 17 5/8” 8A20
IS50A13x1/2” 50 13 1/2” 9A75
IS50A13x5/8” 50 13 5/8” 9A75
IS50A15x1/2” 50 15 1/2” 10A50
IS50A15x5/8” 50 15 5/8” 10A50
IS50A17x1/2” 50 17 1/2” 10A95
IS50A17x5/8” 50 17 5/8” 10A95
IS60A11x1/2” 60 11 1/2” 10A50
IS60A11x5/8” 60 11 5/8” 10A50
IS60A13x1/2” 60 13 1/2” 11A35
IS60A13x5/8” 60 13 5/8” 11A35
IS60A15x1/2” 60 15 1/2” 11A85
IS60A15x5/8” 60 15 5/8’ 11A85
IS80A11x3/4” 80 11 3/4” 18A20
IS80A12x3/4” 80 12 3/4” 26A99
IS100A10x1” 100 10 1” 65A00
01008E11 5/8” to 1/2” Reducer Bushing 1A10
Part # & Bore Size Chain Size Teeth Aetna No. Ref. No.
40A18ID 1/2” 40 or 41 18 AG 2318-A 12A55
40A18ID 5/8” 40 or 41 18 AG 2318 12A55
50A17ID 1/2” 50 17 AG 2416-A 15A27
50A17ID 5/8” 50 17 AG 2416 15A27
60A15ID 1/2” 60 15 AG 2417-A 15A95
60A15ID 5/8” 60 15 AG 2417 15A95
Stamped Idler Sprockets
V-Belt Pressed Steel
Part # O.D. Bore Size Fits Belt Size Ref. No.
8008 5” 1/2” A or B 17A37
8010 5“ 5/8” A or B 17A37
V-Belt Solid Steel
Part # O.D. Bore Size Fits Belt Size Ref. No.
4A08 4” 1/2” A 23A60
4B08 4” 1/2” B 25A56
Idler Belt Pulleys
Idle
PAGE 110 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Pioneer Tips & AdaptersMade in the USA
Complete Couplers - Old Style International Harvester Interchange
Pioneer No. Safeway No. Sleeve Type Thread Ref. No.
4000-4 S20-4 Single 1/2” Pipe 18A85
4200-4 S40-4 Double 1/2” Pipe 14A55
John Deere Old Style Male Tip
Pioneer No. Safeway No. J.D. Part # Description Thread Ref. No.
5060-4 S11-4 RE-11447 Male Tip - Ball Check 1/2” Pipe 6A74
5060-15 S11-15 AR93819 Male Tip - Ball Check 3/4” - 16 ORB 6A99Part #5060-4
International Harvester Male Tip
Pioneer No. Safeway No. IHC Part # Description Thread Ref. No.
5070-4 S12-4 1272770 Male Tip - Ball Check 1/2” Pipe 11A69
5070-16 S12-16 544787R91 Male Tip - Ball Check 7/8” - 14 ORB 12A77Part #5070-4
J I Case Old Style Male Tip
Pioneer No. Safeway No. JIC Part # Description Thread Ref. No.
5080-4 S13-4 A160884 Male Tip - Ball Check 1/2” Pipe 9A75
Part #5080-4
ISO Standard Replacement Tips
Pioneer No. Safeway No. Description Thread Ref. No.
8010-4 S71-4 ISO Male Tip - Ball Check 1/2” Pipe 5A30
8010-4P S71-4P ISO Male Tip - Poppet Check 1/2” Pipe 5A30
8010-15 S71-15 ISO Male Tip - Ball Check 3/4” - 16 ORB 7A57
8010-15P S71-15P ISO Male Tip - Poppet Check 3/4” - 16 ORB 7A57
8010-16 S71-16 ISO Male Tip - Ball Check 7/8” - 14 ORB 6A95
8010-16P S71-16P ISO Male Tip - Poppet Check 7/8” - 14 ORB 7A25
Part #8010-4
Part #8010-4P
Part #400-4
Call Toll Free 1-800-457-5348 PAGE 111AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Pioneer Tips & AdaptersMade in the USA
Body Halves
Part # Description Ref. No.
4050-4 Same as Safeway # S25-4 1/2” - 14 NPTF One Way Sleeve 14A24
4050-16 Same as Safeway # S25-16 7/8-14” 1/2” - 14 NPTF One Way Sleeve 15A99
4250-4 Same as Safeway # S45-4 1/2” - 14 NPTF Double Acting Sleeve 12A99
S25-4-20 Female Body 1/2” NPT Interchanges w/ JD AR47331 use w/ 5060-4 Tip 14A90
S25-15-20 Female Body 3/4” - 16 ORB Interchanges w/ JD AR47331 use w/ 5060-15 Tip 14A65
S25-4-21P Female Body 1/2” NPT Interchanges w/ IH 544788R1 use w/ 5070-4 Tip 14A96
S25-16-21P Female Body 7/8” - 14 ORB Interchanges w/ IH 544788R1 use w/ 5070-16 Tip 14A96
Breakaway Clamps, Dust Caps, & Plugs
Part # Description Ref. No.
5006-4 Double Breakaway Clamp For All Couplings That Have A 1-1/2” Diameter Sleeve 9A90
S42-4-20 Replaces Double Breakaway Clamp For S25-4-20 & S25-15-20 John Deere Style Bodies 14A90
S42-4-21 Double Breakaway Clamp For S25-4-21P & S25-16-21P International Harvester Style Bodies 10A98
5205-4 Dust Plug for 1/2” Body 2A75
5209-4 Dust Cap for 1/2” Body 2A75
Agricultural Coupler Adapters - Pioneer Hydraulic Interconnection
Pioneer No. Safeway No. Description Ref. No.
4060-4 S25-4-1 ISO Male Tip to a John Deere Cone Style Body 14A95
4070-4 S25-4-2 ISO Male Tip to an Int Harvester Female Body 19A79
4065-4 S25-4-3 John Deere Cone Style Tip to a Safeway ISO Female Body 19A90
4065-4L S25-4-3D John Deere Cone Style Tip to a New Style Deere and Ford Body 21A99
4067-4 S25-4-4 John Deere Cone Style Tip to an Int Harvester Female Body 17A55
4076-4 S25-4-5 Int Harvester Male Tip to a John Deere Cone Style Body 20A75
4080-4 S25-4-6 ISO Male Tip to an Old Style Case Female Body 15A50
4075-4 S25-4-7 Int Harvester Male Tip to a Pioneer ISO Female Body 19A41
4075-4L S25-4-7D Int Harvester Male Tip to a New Style John Deere & Ford Body 22A50
4085-4 S25-4-8 Old Style Case Male Tip to a Pioneer ISO Female Body 20A90
4068-4 S25-4-9 John Deere Cone Style Tip to an Old Style Case Female Body 18A55
4086-4 S25-4-10 Old Style Case Male Tip to a John Deere Cone Style Body 18A95
S25-4-11 Int Harvester Male Tip to a Ford or Pioneer ISO Body 12A47
Part #4050-4
PAGE 112 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Splined AdaptersHub City P.T.O. Products
Part # Ref. No.Female Spline
MaleSpline
Length
Extends Tractor P.T.O.
Secured ByShaft End
Shaft Retaining Groove
0332-03531 19A20 1 1/8-6 1 3/8-6 5 1/2” 3 3/4” 3 5/8” Cross Pin
0332-00400 38A91 1 3/8-6 1 1/8-6 6 1/2” 4 3/8” 4 1/1” Cross Pin
0332-00420 30A72 1 3/8-6 1 1/8-6 5 1/8” 3 5/16” 3 5/16” Cross Pin
0332-00371 41A10 1 3/8-6 1 3/8-6 6 1/2” 4 3/8” 3 7/8” Cross Pin
0332-00378 39A85 1 3/8-6 1 3/8-6 5 1/8” 3 5/16” 3 5/16” Cross Pin
0332-0373 39A05 1 3/8-21 1 3/8-6 6 1/2” 4 3/8” 3 7/8” Setscrew
0332-00070 116A03 1 3/8-21 1 3/4-6 7” 5” 4 1/2” Setscrew
0332-00401 62A20 1 3/4-6 1 3/8-6 6 1/2” 4 3/4” 4 5/8” Cross Pin
0332-00001 149A29 1 3/8-21 1 3/8-6 6 7/8” 4 13/16” 4 13/16” Setscrew
0332-00002 149A29 1 3/8-21 1 3/8-6 6 7/8” 4 13/16” 4 11/16” Setscrew
0332-00094* 127A44 1 3/8-21 1 3/4-20 7 11/64” 4 63/64” 4 31/64” Clamp Type
0332-00004 149A29 1 3/8-6 1 3/8-21 6 7/8” 4 13/16” 5 5/16” Setscrew
Splined Adapters to 75 HP
Splined Adapters to 125 HP
• Capacity to operate on tractors related to 75 P.T.O. HP
• Provide a means of connecting two dissimilar splines
• Welded steel construction for added strength
• Corrosion resistant fi nish
• Spring and retaining ring pin or setscrews furnished
• Capacity to operate on tractors related to 125 P.T.O. HP
• Developed for long and rugged use
• Alloy steel heat treated for extra strength
• Corrosion resistant fi nish
• Setscrews furnished
*Not heat treated.
Call Toll Free 1-800-457-5348 PAGE 113AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Splined AdaptersHub City P.T.O. Products
Splined Adapters to 75 HP
Part # Ref. No.Female Spline
Male Spline Length
Extends Tractor P.T.O.
Shaft EndShaft Retaining
Groove
0332-00010 67A29 1 3/8 - 6 1 3/8 - 6 6 1/2” 4 3/8” 4 3/8”
0332-00013 67A29 1 3/8 - 6 1 3/8 - 21 6 1/2” 4 3/8” 4 7/8”
0332-01373 69A77 1 3/8 - 21 1 3/8 - 6 6 1/2” 4 3/8” 4 7/8”
0332-02121 69A77 1 3/8 - 21 1 3/8 - 21 6 1/2” 4 3/8” 4 3/8”
0332-00086 8A78 Repair Kit
Kwik-D-Tach Spline Adapters to 75 HP
0332-01490 120A26 1 3/4 - 20 1 3/8 - 6 8 3/16” 5 3/16” 5 3/16” Clamp Type
0332-01491 120A26 1 3/4 - 20 1 3/8 - 21 8 3/16” 5 11/16” 5 11/16” Clamp Type
Splined Adapters to 125 HP
Part # Ref. No.Female Spline
MaleSpline
Length
Extends Tractor P.T.O.
Secured ByShaft End
Shaft Retaining
Groove
0332-01476 96A20 1 3/4 - 20 1 3/8 - 6 8 3/16” 5 3/16” 5 3/16” Clamp Type
0332-01477 96A20 1 3/4 - 20 1 3/8 - 21 8 3/16” 5 13/16” 5 11/16” Clamp Type
• Capacity to operate on tractors related to 75 P.T.O. HP
• Patented Quick Release Drive
• New P.T.O. Quick Release Concept: spring loaded, rotates about 30º by hand for quick release
• No sticking pins - always easily operated
• No sharp edges, protrusions, pins, or other interferences to injure operators
• For tractors with 1 3/4-20 spline P.T.O.
• For tractors with 1 3/4-20 spline P.T.O.
PAGE 114 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Splined AdaptersHub City P.T.O. Products
Round Shaft Adapters to 75 HP
Part # Ref. No.Female Spline
Male Spline LengthExtends Tractor P.T.O.
Shaft EndShaft Retaining
Groove
0332-00092 36A62 1 3/8 - 6 1 3/8 - 21 6 1/2” 4 3/8” 4 7/8”
0332-01375 36A62 1 3/8 - 21 1 3/8 - 6 6 1/2” 4 3/8” 3 7/8”
0332-90120 Repair Kit Old Style
0332-00182 Repair Kit New Style
Push Pin Type P.T.O. Adapters to 75 HP
Clamp Type P.T.O. to 75 HP
Part # Ref. No. Female Round Keyway Male Spline Length Extends Shaft
0332-00376 39A63 1” 1/4” 1 3/8 - 6 5 11/16” 3 1/4”
0332-00430 47A39 1 1/8” 1/4” 1 3/8 - 6 5 11/16” 3 3/16”
0332-00431 47A39 1 1/4” 1/4” 1 3/8 - 6 5 11/16” 3 3/16”
0332-00432 57A39 1 3/8” 5/16” 1 3/8 - 6 5 11/16” 3 3/16”
0332-00433 72A70 1 1/2” 3/8” 1 3/8 - 6 6 9/32” 4”
Part # Ref. No.Female Spline
Male Spline LengthExtends Tractor P.T.O.
Shaft EndShaft Retaining
Groove
0332-01354 107A72 1 1/8-6 1 3/8 - 6 7 5/16” 4 5/8” 4 5/8”
0332-00057 107A72 1 3/8-6 1 3/8 - 6 7 5/16” 4 3/8” 4 3/8”
0332-00087 107A72 1 3/8-6 1 3/8 - 6 7 5/16” 4 3/8” 3 3/8”
Quick Release Extension Adapter
Call Toll Free 1-800-457-5348 PAGE 115AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Splined AdaptersHub City P.T.O. Products
Sleeve Type Splined Adapters to 75 HP
Part # Ref. No. Female Spline Male Spline Length Special Application
03-32-00355 20A62 31/32 - 10 1 3/8 - 6 2 1/4” IHC Cub & Kubota
03-32-00352 9A57 1 1/8 - 6 1 3/8 - 6 2 1/4”
03-32-00363 9A63 1 1/8 - 6 1 3/8 - 6 2” Replaces Ford 231082
Part # Ref. No.Female
Spline
Male
SplineLength
Extends Tractor P.T.O.
Fits TractorShaft End
Shaft Retaining
Groove
30-31-00690 81A35 1 1/8 - 6 1 1/8 -6 6 21/32” 4 5/32” 4 1/32” All w/ Cross pin hole, including Ford
30-31-00670 81A35 1 1/8 - 6 1 3/8 -6 6 21/32” 4 5/32” 4 1/32” All w/ Cross pin hole, including Ford
30-31-00680 81A35 1 3/8 - 6 1 1/8 -6 6 21/32” 4 5/32” 4 1/32” All w/ Cross pin hole, including Ford
30-31-00660 81A35 1 3/8 - 6 1 3/8 -6 6 21/32” 4 5/32” 4 1/32” All w/ Cross pin hole, including Ford
30-31-00676 Repair Kit
Over-Running Couplers Tractor Models to 75 HP
• All steel weld housing
• Heat treated alloy steel inner sleeve
• Hardened steel keys
• Snap ring construction for quick, easy disassembly for cleaning and service
• Spring roll pin for quick mounting to tractor
• Convenient grease fi tting for gun lubrication
• Designed to operate with 1000 RMP PTOs
Part # Ref. No. Female Spline Male Spline Length Extends Tractor P.T.O.
03-32-00018 13A75 31/32 - 10 1 3/8 - 6 2 1/4” IHC Cub & Kubota
“Forged” P.T.O. Adapter to 75 HP
Universal quick-detach slot and bolt holes. Can be used with any American, British, or European P.T.O. system. Furnished with 5/16” and 1-1/16” spring pin for direct connection to P.T.O..
PAGE 116 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Neapco & Weasler P.T.O. Assemblies & Accessories
Standard Series Supplier
ASAE HP @ 540 RPM
HP @ 1000 RPM Neapco Walterscheid
AgMaster G&G Rockwell Weasler
1 16 30 SERIES N1000 1000
KIT NO. 1-0170 5-170X
1 16 30 SERIES L600 6N L6N 6
KIT NO. 1-1475 302-0600 CPL6R-40 200-0600
2 25 48 SERIES 1200 1140 12N L12N 12
KIT NO. 1-1275 5-242X 303-1200 CPL12R 200-1200
3 35 48 SERIES 1800 1800
KIT NO. 1-1875 200-1875
3 35 56 SERIES 2000 1240 14N L16N 14
KIT NO. 1-2075 5-243X 302-1400 CPL14R 200-1400
4 58 93 SERIES 2200 1340 35N 35N 35
KIT NO. 2-2275 5-243X 302-3500 CP35R 200-3500
5 80 120 SERIES N44 44R 44R 44
KIT NO. 3-0044 302-4400 CP44R 200-4400
6 100 150 SERIES 2600 1480 2600
KIT NO. 3-0188 5-188X 200-2600
6 100 150 SERIES N55 5N 55N 55
KIT NO. 3-0045 302-5500 CP55N 20-5500
Competitor Interchangeability Chart
Call Toll Free 1-800-457-5348 PAGE 117AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Neapco P.T.O. Components Cross & Bearing KitsInch Dimension
Neapco Part # Weasler Part # SeriesBearing
Diameter (A)
Overall
Length (B)
Lock-Up
Dimensions (C)Ref. No.
1-1475 (6R) 200-0600 6 31/32” 2-5/16” 1-29/64” 9A20
1-0170 200-1000 N1000 15/16” 2-5/16” 1-1/2” 8A45
1-1275 (12R) 200-1200 12 1-1/16” 2-9/16” 1-13/16” 9A50
1-1875 200-1875 1800 1” 3-1/8” 2-11/32” 12A54
1-2075 (14R) 200-1400 14 1-1/8” 2-5/32” 2-5/8” 10A75
2-2275 (35R) 200-3500 35 1-1/4” 3-7/32” 3-7/32” 13A25
3-0044 (44R) 200-4400 44 1-5/16’ 4-1/16” 2-51/64” 21A15
3-0188 200-2600 2600 1-3/8” 4-3/16” 4-3/16” 18A96
3-0045 (55R) 200-5500 55 1-17/32” 4-5/16” 4-5/16” 28A75
PAGE 118 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Neapco P.T.O. Components: Tractor Yokes
Part # Weasler Part # Series Bore Ref. No.
16-0606 100-0606 6 1-3/8” - 6 23A90
12-2330 100-1206 12 1-3/8” - 6 24A55
12-2321 100-1221 12 1-3/8” - 21 24A55
20-9330 100-1406 14 1-3/8” - 6 24A55
20-9321 100-1421 14 1-3/8” - 21 24A55
22-2330 101-3506 35 1-3/8” - 6 47A49
22-3521 101-3521 35 1-3/8” - 21 36A75
22-1319 101-3520 35 1-3/4” - 20 58A25
44-4406 101-4406 44 1-3/8” - 6 67A57
44-4421 101-4421 44 1-3/8” - 21 67A57
44-4420 101-4420 44 1-3/4” - 20 67A57
Quick Disconnect Tractor Yokes: Spring-Lock Collar Type
Part # Weasler Part # Ref. No. Series BorePin Repair Kits
Neapco Weasler Part #
16-6409 102-0606 14A67 6 1-3/8” - 6 56-1857 1300-2006
16-0621 102-0621 21A73 6 1-3/8” - 21 56-1857 1300-2021
12-1190 102-1206 23A04 12 1-3/8” - 6 56-1857 1300-2006
12-1193 102-1221 21A88 12 1-3/8” - 21 56-1857 1300-2021
20-9309 102-1406 24A37 14 1-3/8” - 6 56-1857 1300-2006
20-9325 102-1421 25A42 14 1-3/8” - 21 56-1857 1300-2021
22-2312 102-3506 29A96 35 1-3/8” - 6 56-1857 1300-2006
22-2317 102-3521 28A80 35 1-3/8” - 21 56-1857 1300-2021
102-3528 61A79 35 1-3/4” - 6 Spline 1300-2806
102-3520 61A79 35 1-3/4” - 20 1300-2020
44-2220 102-4406 44A56 44 1-3/8” - 6 56-1857 1300-2006
44-2201 102-4421 52A50 44 1-3/8” - 21 56-1857 1300-2021
44-6300 102-4420 75A79 44 1-3/4” - 20 56-2446 1300-2020
55-9306 102-5506 56A14 55 1-3/8” - 6 56-1857 1300-2006
55-9321 102-5521 77A71 55 1-3/8” - 21 56-2446 1300-2021
55-9320 102-5520 113A31 55 1-3/4” - 20 56-2446 1300-2020
Quick Disconnect Tractor Yokes: Pin Type
Call Toll Free 1-800-457-5348 PAGE 119AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Neapco P.T.O. Components: Implement Yokes
Part # Weasler Part # Series Bore Length (L) Keyway Ref. No.
16-6111 800-0612 6 3/4” 2-1/2” 3/16” 11A75
16-6113 800-0614 6 7/8” 2-1/2” 1/4” 11A75
16-6114 800-0615 6 15/16” 2-1/2” 1/4” 11A75
16-6115 800-0616 6 1” 2-1/2” 1/4” 11A75
16-6116 800-0618 6 1-1/8” 2-1/2” 5/16” 11A75
16-6118 800-0620 6 1-1/4” 2-1/2” 5/16” 11A75
12-1134 800-1215 12 15/16” 2-3/4” 1/4” 18A99
12-1115 800-1216 12 1” 3-1/2” 1/4” 18A99
12-1326 800-1218 12 1-1/8” 3-1/2” 1/4” 18A99
12-1176 800-1220 12 1-1/4” 3-1/2” 1/4” 18A99
12-1120 800-1222 12 1-3/8” 3-1/2” 5/16” 18A99
12-1175 800-1224 12 1-1/2” 2-1/2” 3/8” 22A86
20-9115 800-1416 14 1” 3-3/4” 1/4” 19A97
20-9117 800-1418 14 1-1/8” 3-3/4” 5/16” 19A97
20-9302 800-1420 14 1-1/4” 3-3/4” 1/4” 19A97
20-9120 800-1422 14 1-3/8” 3-3/4” 5/16” 19A97
20-9154 800-1423 14 1-7/16” 3-3/4” 3/8” 19A97
20-9307 800-1424 14 1-1/2” 3-3/4” 3/8” 19A97
22-1131 800-3516 35 1” 4-3/16” 1/4” 27A80
22-1132 800-3518 35 1-1/8” 4-3/16” 1/4” 27A80
22-1129 800-3519 35 1-3/16” 4-3/16” 1/4” 27A80
22-1133 800-3520 35 1-1/4” 4-3/16” 1/4” 27A80
22-1118 800-3522 35 1-3/8” 4-3/16” 5/16” 27A80
22-1178 800-3523 35 1-7/16” 4-3/16” 3/8” 27A80
22-1120 800-3524 35 1-1/2” 4-3/16” 3/8” 27A80
22-1316 800-3528 35 1-3/4” 4-3/8” 3/8” 38A99
44-2360 800-4423 44 1-7/16” 4-1/8” 3/8” 41A20
44-2460 800-4424 44 1-1/2” 4-1/8” 3/8” 41A20
44-2820 800-4428 44 1-3/4” 4-1/8” 3/8” 41A20
55-2410 800-5524 55 1-1/2” 4-5/8” 3/8” 55A50
55-2800 800-5528 55 1-3/4” 4-1/16” 3/8” 55A50
55-3240 800-5532 55 2” 5-5/8” 1/2” 81A22
Round Implement Yokes
PAGE 120 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Neapco P.T.O. Components: Implement Yokes
Round, Double-Keyway
Part # Weasler Part # Series Bore Length (L) Keyway Ref. No.
16-6213 806-0614 6 7/8” 2-1/2” 3/16” - 1/4” 12A95
16-6215 806-0616 6 1” 2-1/2” 3/16” - 1/4” 12A95
16-6216 806-0618 6 1-1/8” 2-1/2” 1/4” - 5/16” 12A95
16-6218 806-0620 6 1-1/4” 2-1/2” 1/4” - 5/16” 12A95
12-1215 806-1216 12 1” 3-1/2” 3/16” - 1/4” 19A55
12-1216 806-1218 12 1-1/8” 3-1/2” 1/4” - 5/16” 19A55
12-1218 806-1220 12 1-1/4” 3-1/2” 1/4” - 5/16” 19A55
20-9216 806-1418 14 1-1/8” 3-3/4” 1/4” - 5/16” 20A30
20-9217 806-1419 14 1-3/16” 3-3/4” 1/4” - 5/16” 20A30
20-9218 806-1420 14 1-1/4” 3-3/4” 1/4” - 5/16” 20A30
22-1218 806-3520 35 1-1/4” 4-3/16” 1/4” - 5/16” 29A94
22-1219 806-5822 35 1-3/8” 4-3/16” 5/16” - 3/8” 29A94
44-2045 806-4420 44 1-1/4” 4-1/8” 1/4” - 5/16” 43A85
44-2256 806-4422 44 1-3/8” 4-1/8” 1/4” - 5/16” 43A85
44-2456 806-4424 44 1-1/2” 4-1/8” 5/16” - 3/8” 43A85
Quick Disconnect Implement Yokes: Pin Type
Part # Series Bore Length (L)Pin Repair Kits
Ref. No.AGRI Part # Ref. No.
16-6407 6 1-/3/8” - 6 3-9/16” 56-1857 5A50 N/A
12-1300 12 1-/3/8” - 6 4-1/16” 56-1857 5A50 32A30
12-1350 12 1-/3/8” - 21 4-1/16” 56-1857 5A50 37A57
20-9319 14 1-/3/8” - 6 4-1/4” 56-1857 5A50 37A35
20-9324 14 1-/3/8” - 21 4-1/4” 56-1857 5A50 52A68
22-2315 35 1-/3/8” - 6 4-13/16” 56-1857 5A50 33A05
22-2316 35 1-/3/8” - 21 4-13/16” 56-1857 5A50 46A85
Call Toll Free 1-800-457-5348 PAGE 121AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Hexagonal Implement Yokes
Part # Weasler Part # Series Bore Length (L) Ref. No.
16-6303 805-0614 6 7/8” 2-1/2” 31A63
12-1328 805-1218 12 1-1/8” 3-1/2” 16A55
20-9121 805-1418 14 1-1/8” 3-7/8” 23A08
Part # Weasler Part # Series Bore Length (L) Ref. No.
16-6171 804-0612 6 3/4” 2-1/2” 13A37
16-6302 804-0614 6 7/8” 2-1/2” 13A37
16-6303 804-0616 6 1” 2-1/2” 13A37
16-6138 804-0618 6 1-1/8” 2-1/2” 13A37
16-6127 804-0620 6 1-1/4” 2-1/2” 13A37
12-1170 804-1214 12 7/8” 2-3/4” 19A99
12-1163 804-1216 12 1” 3-1/2” 19A99
12-1148 804-1218 12 1-1/8” 3-1/2” 19A99
12-1321 804-1220 12 1-1/4” 2-3/4” 19A99
20-9310 804-1414 14 7/8”x1” Double Sq. 3-3/4” 21A55
20-9183 804-1418 14 1-1/8” 3-3/4” 21A55
20-9127 804-1420 14 1-1/4” 3-9/16” 21A55
22-1125 804-3516 35 1” 4-3/16” 29A10
22-1124 804-3518 35 1-1/8” 4-3/16” 29A10
22-1190 804-3519 35 1-3/16” 4-1/2” 29A10
22-1128 804-3520 35 1-1/4” 4-1/8” 29A10
22-1130 804-3524 35 1-1/2” 4-1/8” 33A44
22-1126 804-3526 35 1-5/8” 4-1/8” 33A44
44-1826 804-4418 44 1-1/8” 4-1/8” 44A90
Square Implement Yokes
Neapco P.T.O. Components: Implement Yokes
PAGE 122 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Part # Weasler Part # Series Bore Length (L) Ref. No.
16-6516 802-0616 6 1” 2-1/2” 15A95
16-6513 802-0618 6 1-1/8” 2-1/2” 15A95
16-6165 802-0620 6 1-1/4” 2-1/2” 15A95
12-1319 802-1216 12 1” 3” 22A79
12-1302 802-1218 12 1-1/8” 3-1/2” 22A79
12-1330 802-1220 12 1-1/4” 3” 22A79
20-9318 802-1418 14 1-1/8” 3-3/4” 23A89
20-9317 802-1420 14 1-1/4” 3-3/4” 23A89
20-9160 802-1422 14 1-3/8” 3-1/2” 23A89
20-9320 802-1424 14 1-1/2” 3-3/4” 23A89
22-1145 802-3520 35 1-1/4” 4-3/16” 31A78
22-1337 802-3522 35 1-3/8” 4-3/16” 31A78
22-1162 802-3524 35 1-1/2” 4-3/16” 31A78
Shear Pin Implement Yokes
Part # Weasler Part # Series Bore Length (L) Ref. No.
16-6134 801-0618 6 1-1/8” - 6 2-1/2” 12A25
16-6187 801-0606 6 1-3/8” - 6 2-1/2” 12A25
12-1180 801-1218 12 1-1/8” - 6 3-1/2” 17A71
12-1172 801-1206 12 1-3/8” - 6 3-1/2” 17A71
12-1315 801-1221 12 1-3/8” - 21 3-1/2” 17A71
20-9180 801-1418 14 1-1/8” - 6 3-7/16” 19A55
20-9132 801-1406 14 1-3/8” - 6 3-3/4” 19A55
20-9193 801-1421 14 1-3/8” - 21 3-3/4” 19A55
22-1142 35 1-1/8” - 6 4-3/16” 29A40
22-1134 801-3506 35 1-3/8” - 6 4-3/16” 27A99
22-1330 801-3521 35 1-3/8” - 21 4-3/16” 27A99
44-2206 801-4406 44 1-3/8” - 6 4-1/8” 37A01
44-2221 801-4421 44 1-3/8” - 21 4-1/8” 37A01
Spline Bore Implement Yokes
Neapco P.T.O. Components: Implement Yokes
Call Toll Free 1-800-457-5348 PAGE 123AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Neapco P.T.O. Components: Implement Yokes
Part # Weasler Part # Series Bore Tube Size Length (L) Ref. No.
16-6131 700-0600 6 1” x 1-1/8” 1” x 1-1/8” RECT. 2-3/4” 14A28
16-6132 701-0600 6 1-3/16” RD. 1-5/8” x 16 GA. RD. 3” 15A55
12-1318 700-1200 12 1-9/32” x 1-13/32” 1-1/4” x 1-3/8” RECT. 2-15/16” 18A85
12-1334 701-1200 12 1-1/2” RD. 2” x 14 GA. RD. 3-3/4” 18A85
20-9131 701-1400 14 1-1/2” RD. 2” x 14 GA. RD. 4” 22A39
20-9313 700-1400 14 1-9/32” x 1-13/32” 1-1/4” x 1-3/4” RECT. 3-3/16” 22A39
22-1343 703-3500 35 1-5/8” RD. 2-1/4” x 11 GA. RD. 4-1/2” 29A46
22-1325 701-3500 35 1-5/8” RD. 2-1/8” x 11 GA. RD. 4-1/2” 29A56
22-1307 702-3500 35 1-5/8” RD. 2-1/8” x 14 GA. RD. 4-1/2” 30A54
44-2200 701-4400 44 1-7/8” RD. 2-1/2” x 10 GA. RD. 4-7/8” 46A20
55-3640 701-5500 55 --- 2-1/2” x 10 GA. RD. 4-5/8” 69A71
Tube Weld Yokes
Part # Weasler Part # Series Bore Length (L) Ref. No.
16-6129 300-0600 6 3/4” x 7/8” 2-1/2” 13A25
12-1340 300-1200 12 1” x 1/8” 2-15/16” 17A85
20-9126 300-1400 14 1” x 1/8” 3-3/16” 21A52
20-9129* 14 1” x 1/8” 3-3/16” 31A31
22-1344 300-3500 35 1-3/16” SQ. 3-5/8” 28A48
44-2100 300-4400 44 1-5/16” SQ. 4-1/8” 45A74
55-2130 300-5500 55 1-5/16” SQ. 4-1/8” 67A45
*Common Phasing for Weasler manufactured drives.Weasler drives are phased 90° off from Neapco drive and therefor are not interchangeable in half-shaft sub-assemblies.
Shaft Weld Yokes
PAGE 124 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Neapco P.T.O. Components
Torque Limiters
Part # Weasler Part # Series Ref. No.
48-9202 803-1400 14 51A06
48-1181 803-3500 35 52A55
803-4400 803-4400 14 72A55
Part # Weasler Part # Series Inside Diameter Tube Size Length (L) Ref. No.
53-0635 510-0600 6 3/4” x 7/8” 1 5/8” x 16 GA. RD. 4” 27A78
53-2034 500-1400 12 1” x 1-1/8” 2” x 14 GA. 5” 19A46
53-2034 500-1400 14 1” x 1-1/8” 2” x 14 GA. 5” 19A46
53-2434 501-3500 35 1-3/16” SQ. 2 1/4” x 11 GA. 5” 29A87
53-2434 500-3500 35 1-3/16” SQ. 2 1/8” x 11 GA. 5” 26A55
53-3500 501-3500 35 1-3/16” SQ. 2 1/8” x 14 GA. 5” 36A29
53-2434 44 1-3/16” SQ. 2 1/4” x 11 GA. 5” 29A97
53-2644 44 1-5/16” SQ. 2 3/4” x 12 GA. 5” 30A42
53-2643 500-4400 44 1-5/16” SQ. 2 1/2” x 10 GA. 5” 32A82
53-2643 500-4400 55 1-5/16” SQ. 2 1/2” x 10 GA. 5” 32A82
Slip Sleeves
Call Toll Free 1-800-457-5348 PAGE 125AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Solid Shafting: Round - 72” Length - Full Length Keyway
Part # Type Keyway Ref. No.
71-0750 3/4” RD. 3/16” 45A40
71-0813 13/16” RD. 1/4” 43A43
71-0875 7/9” RD. 1/4” 47A70
71-1000 1” RD. 1/4” 36A60
71-1250 1-1/4” RD. 5/16” 56A77
Solid Shafting: Square - 72” Length
Part # Weasler # Shaft Size Ref. No.
72-0750 400-0012 3/4” SQ. 34A52
72-0875 7/8” SQ. 38A68
72-1000 400-0016 1” SQ. 53A20
73-1188 400-0019 1-3/16” SQ. 66A82
73-1250 400-0020 1-1/4” SQ. 85A90
73-1313 400-0021 1-5/16” SQ. 95A97
Solid Shafting: Rectangular - 72” Length
Part # Dimensions Use with Series Ref. No.
73-0705 3/4” x 7/8” 6, Spicer 1000 38A30
73-1001 1” x 1-1/8” 12, 14 69A85
Solid Shafting: Hexagonal - 72” Length
Part # Dimensions Ref. No.
72-0888 7/8” HEX 42A51
72-1002 1” HEX 62A25
72-1125 1-1/8” HEX 46A55
Solid Shafting: Rectangular and Round - 72” Length
Part # Weasler # Type Dimensions Use with Series Ref. No.
70-1001 600-1618 Rectangle 1” x 1-1/8” 6, Spicer 1000 65A15
70-1250 600-2022 Rectangle 1-1/4” x 1-3/8” 12, 14 85A08
70-1625 Round 1-5/8” x 16 GA. 6, Spicer 1000 44A70
70-2000 Round 2” x 14 GA. 12, 14, Spicer 1000 47A75
70-2125 602-3500 Round 2-1/8” x 11 GA. 35 73A57
70-2250 Round 2-1/4” x 11 GA. 35, 44 69A55
70-2500 602-4400 Round 2-1/2” x 10 GA. 44, 55 111A60
70-2750 602-2600 Round 2-3/4” x 12 GA. 44, 2600 91A90
Neapco P.T.O. Components
PAGE 126 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Neapco P.T.O. Components
Part # Series Length to End (L) Overall Driveline Length Description Ref. No.
65-1639 6 36” 48” 3/4” x 7/8” Rectangular SHAFT 38A25
65-2839 12 36” 48” 1” x 1-1/8” Rectangular SHAFT 47A65
65-2840 14 35-3/4” 48” 1” x 1-1/8” Rectangular SHAFT 53A77
65-2639 35 35-7/8” 48” 1-3/16” Square SHAFT 60A46
65-4435 44 35-3/8” 48” 1-5/16” Square SHAFT 135A93
Male Shaft with Yoke
Part # Series Length to End (L) Overall Driveline Length Description Ref. No.
64-1639 6 36” 48” 1” x 1-1/8” O.D. Rectangular TUBE 59A64
64-2739 12 36” 48” 1-1/4” x 1-3/8” O.D. Rectangular TUBE 69A85
64-2740 14 36-9/16” 48” 2” O.D. TUBE with 1” x 1-1/8” Slip Sleeve 71A50
64-2539 35 35-1/8” 48” 2-1/8” O.D. TUBE with 1-3/16” Slip Sleeve 80A98
64-4435 44 34-5/8” 48” 2-1/2” O.D. TUBE with 1-5/16” Slip Sleeve 120A50
Female Tube with Yoke
Complete Drive Shaft 48” Long Complete with Plastic Shield and Cross & Bearing Kits. Does NOT come with Implement or Tractor Yoke Ends.
Part # Series Ref. No.
58-1639 6 163A43
58-1239 12 179A50
58-2040 14 177A05
58-2239 35 228A15
58-4439 44 299A90
Call Toll Free 1-800-457-5348 PAGE 127AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Part # Series Overall Driveline Length Bell Outside Diameter Ref. No.
69-0648 6 60” 5-1/4” 36A05
69-1248 12 60” 6-1/8” 37A93
69-1248 14 60” 6-1/8” 37A93
69-2248 35 60” 7-1/6” 45A90
69-2648 44 60” 8” 64A20
NOTE: Shield bearings are NOT included! See below for bearings. Shield can be cut to fi t 36” or 48” drives.
Plastic Shields
Part # Series Use with Shield No. Ref. No.
56-1600 6 69-0648 6A57
56-2000 12 69-1248 6A57
56-2000 14 69-1248 6A57
56-2200 35 69-2248 7A50
56-0844 44 69-2648 7A85
Shield Bearings
Neapco P.T.O. Components
PAGE 128 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Bondioli, Pavesi, and Walterscheid
Series Page Series Page Series Page
1 129-130 7N 146-148 2500 165-166
2 131-133 8 149-151 2600 167-168
3 134-136 2100/100 152-154 2380 169-170
4 137-139 2200/200 155-157 2480 171-172
5 140-142 2300/210 158-160 2180 173-174
6 143-145 2400 160-163
Complete drivelines, see pages 175-177. Friction clutches and repair kits, see page 178.
Call Toll Free 1-800-457-5348 PAGE 129AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Bondioli and Pavesi
1 Series
Part # A B Ref. No.
200-615422mm (7/8”)
54mm (2-1/8”)
12A98
Cross & Bearing Kit (R-Kit)Snap ring located in yoke
Part # A. Bore Ref. No.
300-6126 27.5mm (1-5/64”) 21A61
Inner Profi le YokeWith bearing grove (guard must rotate freely on yoke)
Part # A. Bore Ref. No.
101-6106 1-3/8” x 6 spl. 35A50
101-6121 1-3/8” x 21 spl. 36A55
Tractor YokeSafety Slide Lock
Part # A. Bore Ref. No.
102-6118 1-1/8” x 6 spl. 15A75
102-6106 1-3/8” x 6 spl. 14A90
102-6121 1-3/8” x 21 spl. 16A55
Tractor YokeQuick Disconnect
Part # Description Ref. No.
13005000 4 per kit 5A50
Easy Lock™ Replacement Kit
Part # A B Ref. No.
508-08508mm
(5/16”)50mm
(1-31/32”)0A99
Roll Pin
PAGE 130 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Bondioli and Pavesi
Part # A. Bore Ref. No.
700-6133 33mm (1-5/16”) 14A35
Outer Profi le YokeWith bearing grove (guard must rotate freely on yoke)
1 Series
Part # Length Ref. No.
400-6126 1.5m (59-1/16”) 21A99
Inner Tube
Part # A. Bore B. Keyway Ref. No.
800-610825.4mm
(1”)1/4” 25A57
800-611031.75mm (1.1/4”)
1/4” 27A07
800-613030mm
(1-3/16”)25/64” 25A57
Implement YokeRound bore with keyway and set screw
Part # Length Ref. No.
600-6133 1.5m (59-1/16”) 31A24
604-6133 1.0m (39-3/8”) 26A78
Outer Tube
GuardOrder bearings as required.
Part # Overall Drive Length Ref. No. Bearing Kit (2 per kit) Ref. No.
900-2548 48” 54A79 961-5029 10A39
900-2560 60” 66A43 961-5029 10A39
Call Toll Free 1-800-457-5348 PAGE 131AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Bondioli and Pavesi
2 Series
Part # A B Ref. No.
200-826123.8mm (15/16”)
61.2mm (2-13/32”)
12A40
Cross & Bearing Kit (R-Kit)Snap ring located in yoke
Part # A. Bore Ref. No.
300-6229 29.8mm (1-11/64”) 16A55
Inner Profi le YokeWith bearing grove (guard must rotate freely on yoke)
Part # A. Bore Ref. No.
101-8206 1-3/8” x 6 spl. 22A50
101-8221 1-3/8” x 21 spl. 22A50
Tractor YokeSafety Slide Lock
Part # A. Bore Ref. No.
102-8218 1-1/8” x 6 spl. 21A70
102-8206 1-3/8” x 6 spl. 21A70
102-8221 1-3/8” x 21 spl. 21A70
Tractor YokeQuick Disconnect
PAGE 132 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Bondioli and Pavesi
Part # A. Bore Ref. No.
700-6236 36.8mm (1-29/64”) 24A30
Outer Profi le YokeWith bearing grove (guard must rotate freely on yoke)
Part # A. Bore B. Keyway Ref. No.
800-822525mm
(63/64”)8mm
(5/16”)20A75
800-820825mm(1”)
6.35mm (1/4”)
19A59
800-821828.6mm (1-1/8”)
6.35mm (1/4”)
19A59
800-823030mm
(1-3/16”)8mm
(5/16”)19A59
800-821031.8mm (1-1/4”)
6.35mm (1/4”)
19A59
800-822031.8mm (1-1/4”)
8mm (5/16”)
19A59
800-821134.9mm (1-3/8”)
8mm (5/16”)
25A29
Implement YokeRound bore with keyway and set screw
2 Series
Part # A. Bore Ref. No.
802-8220 31.8mm (1-1/4”) rd. 29A51
802-8222 34.9mm (1-3/8”) rd. 29A51
Shear Pin YokeWith Pinhole
Call Toll Free 1-800-457-5348 PAGE 133AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Bondioli and Pavesi
2 Series
Part # A B Ref. No.
508-08508mm
(5/16”)50mm
(1-31/32”)0A99
Roll Pin
Part # Description Ref. No.
13005000 4 per kit 5A50
Easy Lock™ Replacement Kit
Part # Overall Drive Length Ref. No. Bearing Kit (2 per kit) Ref. No.
900-2548 48” 54A79 961-5029 10A39
900-2560 60” 66A43
GuardOrder bearings as required
Part # Length Ref. No.
400-6229 1.5m (59-1/16”) 28A07
Inner Tube
Part # Length Ref. No.
600-6236 1.5m (59-1/16”) 24A99
Outer Tube
PAGE 134 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Bondioli and Pavesi
3 Series
Part # A B Ref. No.
200-837027mm
(1-1/16”)70mm
(2-3/4”)14A72
Cross & Bearing Kit (R-Kit)Snap ring located in yoke
Part # A. Bore Ref. No.
300-6336 36.8mm (1-29/64”) 18A55
Inner Profi le YokeWith bearing grove (guard must rotate freely on yoke)
Part # A. Bore Ref. No.
101-8306 1-3/8” x 6 spl. 23A31
101-8321 1-3/8” x 21 spl. 23A31
Tractor YokeSafety Slide Lock
Part # A. Bore Ref. No.
102-8306 1-1/8” x 6 spl. 22A20
102-8321 1-3/8” x 6 spl. 22A20
Tractor YokeQuick Disconnect
Call Toll Free 1-800-457-5348 PAGE 135AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Bondioli and Pavesi
3 Series
Part # A. Bore Ref. No.
700-6343 44mm (1-47/64”) 18A55
Outer Profi le YokeWith bearing grove (guard must rotate freely on yoke)
Part # A. Bore B. Keyway Ref. No.
800-831031.8mm (1-1/4”)
6.4mm (1/4”)
20A75
800-831134.9mm (1-3/8”)
8mm (5/16”)
20A75
800-832525mm
(63/64”)8mm
(5/16”)20A75
800-833030mm
(1-3/16”)8mm
(5/16”)20A75
Implement YokeRound bore with keyway and set screw
Part # A. Bore Ref. No.
802-8310 31.8mm (1-1/4”) 26A50
802-8325 25mm (63/64”) 29A50
802-8330 30mm (1-3/16”) 26A50
802-8335 34.9mm (1-3/8”) 29A50
Shear Pin YokeWith Pinhole
Part # A B Ref. No.
508-08608mm
(5/16”)60mm
(1-31/32”)0A99
Roll Pin
PAGE 136 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Bondioli and Pavesi
3 Series
Part # Description Ref. No.
13005000 4 per kit 5A50
Easy Lock™ Replacement Kit
Part # Overall Drive Length Ref. No. Bearing Kit (2 per kit) Ref. No.
900-2548 48” 54A79 961-5029 10A39
900-2560 60”
GuardOrder bearings as required
Part # Length Ref. No.
600-6236 1.5m (59-1/16”) 24A99
Inner Tube
Part # Length Ref. No.
600-6343 1.5m (59-1/16”) 26A99
604-6343 1.0m (39-3/8”) 23A59
Outer Tube
Call Toll Free 1-800-457-5348 PAGE 137AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Bondioli and Pavesi
4 Series
Part # A B Ref. No.
200-847427mm
(1-1/16”)74.6mm
(2-15/16”)15A47
Cross & Bearing Kit (R-Kit)Snap ring located in yoke
Part # A. Bore Ref. No.
101-8406 1-3/8” x 6 spl. 25A20
101-8421 1-3/8” x 21 spl. 25A20
Tractor YokeSafety Slide Lock
Part # A. Bore Ref. No.
102-8406 1-1/8” x 6 spl. 22A55
102-8418 1-3/8” x 6 hex 26A51
102-8421 1-3/8” x 21 spl. 24A47
Tractor YokeQuick Disconnect
Part # A. Bore Ref. No.
104-8406 1-1/8” x 6 spl. 73A55
104-8420 1-3/4” x 20 spl. 73A55
104-8421 1-3/8” x 21 spl. 73A55
Tractor YokeBall Shear
Part # A B Ref. No.
508-08608mm
(5/16”)60mm
(1-31/32”)0A99
Roll Pin
PAGE 138 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Bondioli and Pavesi
4 Series
Part # A B Ref. No.
200-847427mm
(1-1/16”)74.6mm
(2-15/16”)15A47
Cross & Bearing Kit (E-Kit)Snap ring located in yoke
Part # A. Bore Ref. No.
300-6436 36.8mm (1-29/64”) 19A93
Inner Profi le YokeWith bearing grove (guard must rotate freely on yoke)
Part # A. Bore Ref. No.
700-6443 44mm (1-47/64”) 32A04
Outer Profi le YokeWith bearing grove (guard must rotate freely on yoke)
Part # Length Ref. No.
400-6436 1.5m (59-1/16”) 39A87
404-6436 1.0m (39-3/8”) 29A19
Inner Tube
Part # Length Ref. No.
600-6343 1.5m (59-1/16”) 26A99
604-6343 1.0m (39-3/8”) 23A59
Outer Tube
Part # Description Ref. No.
13005000 4 per kit 5A50
Easy Lock™ Replacement Kit
Call Toll Free 1-800-457-5348 PAGE 139AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Bondioli and Pavesi
4 Series
Part # A. Bore B. Keyway Ref. No.
800-843030mm
(1-3/16”)8mm
(5/16”)31A09
800-841030mm
(1-1/4”)6.4mm (1/4”)
31A09
800-841134.9mm (1-3/8”)
8mm (5/16”)
31A09
800-842438.1mm (1-1/2”)
9.5mm (3/8”)
31A09
800-843535mm
(1-3/8”)10mm
(25/64”)31A09
Implement YokeRound bore with keyway and set screw
Part # A. Bore Ref. No.
802-841038.1mm (1-1/4”)
23A79
802-843030mm
(1-3/16”)27A30
802-843535mm
(1-3/8”)27A30
Implement YokeShear pin with pinhole
Part # Overall Drive Length Ref. No. Bearing Kit (2 per kit) Ref. No.
900-2548 48” 54A79 961-2534 10A39
900-2560 60” 66A43 961-2534 10A39
GuardOrder bearings as required
PAGE 140 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Bondioli and Pavesi
5 Series
Part # A B Ref. No.
200-847430.2mm (1-3/16”)
79.4mm (3-1/8”)
16A85
Cross & Bearing Kit (R-Kit)Snap ring located in yoke
Part # A. Bore Ref. No.
101-6506 1-3/8” x 6 spl. 31A40
101-6521 1-3/8” x 21 spl. 31A40
Tractor YokeSafety Slide Lock
Part # A. Bore Ref. No.
102-6506 1-3/8” x 6 spl. 33A28
102-6520 1-3/4” x 20 spl. 33A28
102-6521 1-3/8” x 21 spl. 33A28
Tractor YokeQuick Disconnect
Part # A. Bore Ref. No.
104-6506 1-1/8” x 6 spl. 64A55
104-6520 1-3/4” x 20 spl. 80A31
104-6521 1-3/8” x 21 spl. 77A05
Tractor YokeBall Shear
Part # Description Ref. No.
13005000 4 per kit 5A50
Easy Lock™ Replacement Kit
Call Toll Free 1-800-457-5348 PAGE 141AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Bondioli and Pavesi
5 Series
Part # A. Bore Ref. No.
300-6545 45.2mm (1-25/32”) 25A45
Inner Profi le YokeWith bearing grove (guard must rotate freely on yoke)
Part # A. Bore Ref. No.
700-6552 51.7mm (2-3/64”) 26A74
Outer Profi le YokeWith bearing grove (guard must rotate freely on yoke)
Part # Length Ref. No.
400-6545 1.5m (59-1/16”) 61A63
404-6545 1.0m (39-3/8”) 49A83
Inner Tube
Part # Length Ref. No.
600-6552 1.5m (59-1/16”) 37A50
604-6552 1.0m (39-3/8”) 32A90
Outer Tube
Part # A B Ref. No.
508-107510mm
(25/64”)75mm
(2-61/64”)1A45
Roll Pin
PAGE 142 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Bondioli and Pavesi
Part # A. Bore B. Keyway Ref. No.
800-651031.8mm (1-1/4”)
6.4mm (1/4”)
39A20
800-652235mm
(1-3/8”)13mm
(33/64”)39A20
800-652438.1mm (1-1/2”)
9.5mm (3/8”)
39A20
Implement YokeRound bore with keyway and set screw
Part # A. Bore Ref. No.
802-6535 34.9mm (1-3/8”) 31A97
Implement YokeShear pin with pinhole
5 Series
Part # A. Bore Ref. No.
807-6521 35mm (1-3/8” x 21 spl.) 42A40
Implement YokeClamp Yoke
Part # Overall Drive Length Ref. No. Bearing Kit (2 per kit) Ref. No.
900-2548 48” 54A79 961-2534 10A39
900-2560 60” 66A43 961-2534 10A39
GuardOrder bearings as required.
Call Toll Free 1-800-457-5348 PAGE 143AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Bondioli and Pavesi
6 Series
Part # A B Ref. No.
200-869230.2mm (1-3/16”)
92mm (3-5/8”)
20A67
Cross & Bearing Kit (R-Kit)Snap ring located in yoke
Part # A. Bore Ref. No.
101-8606 1-3/8” x 6 spl. 39A20
101-8620 1-3/4” x 20 spl. 52A55
101-8621 1-3/8” x 21 spl. 45A55
Tractor YokeSafety Slide Lock
Part # A. Bore Ref. No.
102-8606 1-3/8” x 6 spl. 37A65
102-8620 1-3/4” x 20 spl. 37A65
102-8621 1-3/8” x 21 spl. 37A65
Tractor YokeQuick Disconnect
Part # A. Bore Ref. No.
104-8606 1-1/8” x 6 spl. 69A55
104-8620 1-3/4” x 20 spl. 84A74
104-8621 1-3/8” x 21 spl. 84A74
Tractor YokeBall Shear
Part # A B Ref. No.
508-108010mm
(25/64”)80mm
(3-5/32 ”)1A47
Roll Pin
PAGE 144 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Bondioli and Pavesi
6 Series
Part # A. Bore Ref. No.
300-6645 45.2mm (1-25/32”) 26A79
Inner Profi le YokeWith bearing grove (guard must rotate freely on yoke)
Part # A. Bore Ref. No.
700-6654 54.2mm (2-1/8”) 48A07
Outer Profi le YokeWith bearing grove (guard must rotate freely on yoke)
Part # Length Ref. No.
400-6545 1.5m (59-1/16”) 61A63
404-6545 1.0m (39-3/8”) 49A53
Inner Tube
Part # Length Ref. No.
600-6554 1.5m (59-1/16”) 57A25
604-6554 1.0m (39-3/8”) 39A20
Outer Tube
Part # Overall Drive Length Ref. No. Bearing Kit (2 per kit) Ref. No.
902-3548 48” 75A79 961-3567 14A94
902-3560 60” 86A44 961-3567 14A94
GuardOrder bearings as required
Call Toll Free 1-800-457-5348 PAGE 145AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Bondioli and Pavesi
6 Series
Part # A. Bore B. Keyway Ref. No.
800-861031.8mm (1-1/4”)
6.4mm (1/4”)
35A28
800-861135mm
(1-3/8”)13mm (5/16”)
35A28
800-862438.1mm (1-1/2”)
9.5mm (3/8”)
35A28
800-862844.5mm (1-3/4”)
9.5mm (3/8”)
35A28
Implement YokeRound bore with keyway and set screw
Part # A. Bore Ref. No.
802-8611 34.9mm (1-3/8”) 31A97
802-8620 31.8mm (1-1/4”) 37A50
Implement YokeShear pin with pinhole
Part # A. Bore Ref. No.
807-8606 1-3/8” x 6 spl. 34A63
807-8620 1-3/4” x 20 spl. 49A85
807-8621 1-3/8” x 21 spl. 51A79
Implement YokeClamp Yoke
Part # Description Ref. No.
13005000 4 per kit 5A50
Easy Lock™ Replacement Kit
PAGE 146 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Bondioli and Pavesi
7N Series
Part # A B Ref. No.
203-679434.9mm (1-3/8”)
94mm (3-45/64”)
37A80
Cross & Bearing Kit (R-Kit)Snap ring located in yoke
Part # A. Bore Ref. No.
101-6706 1-3/8” x 6 spl. 41A83
101-6720 1-3/4” x 20 spl. 79A80
101-6721 1-3/8” x 21 spl. 48A80
Tractor YokeSafety Slide Lock
Part # A. Bore Ref. No.
102-6706 1-3/8” x 6 spl. 31A05
102-6720 1-3/4” x 20 spl. 59A15
102-6721 1-3/8” x 21 spl. 34A40
102-6728 1-3/4” x 6 spl. 47A30
Tractor YokeQuick Disconnect
Part # A. Bore Ref. No.
104-6706 1-1/8” x 6 spl. 81A81
104-6721 1-3/8” x 21 spl. 81A81
Tractor YokeBall Shear
Call Toll Free 1-800-457-5348 PAGE 147AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Bondioli and Pavesi
7N Series
Part # A. Bore Ref. No.
300-6745 45.2mm (1-25/32”) 34A75
Inner Profi le YokeWith bearing grove (guard must rotate freely on yoke)
Part # A. Bore Ref. No.
700-6754 54.2mm (2-1/8”) 33A67
Outer Profi le YokeWith bearing grove (guard must rotate freely on yoke)
Part # Length Ref. No.
400-6745 1.5m (59-1/16”) 57A97
Inner Tube
Part # Length Ref. No.
600-6654 1.5m (59-1/16”) 57A25
604-6654 1.0m (39-3/8”) 51A90
Outer Tube
Part # A B Ref. No.
200-870630.2mm (1-3/16”)
106.5mm (4-3/16”)
24A50
Cross & Bearing Kit for AB7*Snap ring located in yoke*Old Bondioli and Pavesi 7 series is interchangeable with Walterscheid 230 series.
PAGE 148 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Bondioli and Pavesi
7N Series
Part # A B Ref. No.
508-108010mm
(25/64”)80mm
(3-5/32 ”)1A47
Roll Pin
Part # Description Ref. No.
13005000 4 per kit 5A50
Easy Lock™ Replacement Kit
Part # Overall Drive Length Ref. No. Bearing Kit (2 per kit) Ref. No.
902-3548 48” 75A79 961-3576 14A94
902-3560 60” 86A44 961-3576 14A94
GuardOrder bearings as required
Part # A. Bore B. Keyway Ref. No.
800-672235mm
(1-3/8”)8.0mm (5/16”)
31A55
Implement YokeRound bore with keyway and set screw
Call Toll Free 1-800-457-5348 PAGE 149AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Bondioli, Pavesi, and Walterscheid
8 Series
Part # A. Bore Ref. No.
101-6806 1-3/8” x 6 spl. 55A29
101-6820 1-3/4” x 20 spl. 67A10
101-6821 1-3/8” x 21 spl. 73A55
Tractor YokeSafety Slide Lock
Part # A. Bore Ref. No.
102-6806 1-3/8” x 6 spl. 46A49
102-6820 1-3/4” x 20 spl. 49A70
102-6821 1-3/8” x 21 spl. 49A70
102-6828 1-3/4” x 6 spl. 64A90
Tractor YokeQuick Disconnect
Part # A. Bore Ref. No.
104-6806 1-1/8” x 6 spl. 78A83
104-6821 1-3/8” x 21 spl. 89A19
Tractor YokeBall Shear
Part # A. Bore Ref. No.
110-6806 1-3/8” x 6 spl. 55A29
Auto-Lok
Part # A B Ref. No.
508-08808mm
(5/16”)80mm
(3-5/32 ”)1A45
508-128012mm
(15/32”)80mm
(3-5/32 ”)1A95
Roll Pin
PAGE 150 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Bondioli, Pavesi, and Walterscheid
8 Series
Part # A B Ref. No.
200-6680634.9mm (1-3/8”)
106.5mm (4-3/16”)
29A86
Cross & Bearing Kit (R-Kit)Snap Ring Located In Yoke
Part # A. Bore Ref. No.
300-6845(Old series 8)
45.2mm (1-25/32”) 52A26
300-6854 54.2mm (2-1/8”) 54A31
Inner Profi le YokeWith bearing grove (guard must rotate freely on yoke)
Part # A. Bore Ref. No.
700-6863 63mm (2-31/64”) 43A05
Outer Profi le YokeWith bearing grove (guard must rotate freely on yoke)
Part # Length Ref. No.
600-6654 1.5m (59-1/16”) 57A25
600-6654 1.0m (39-3/8”) 49A23
Inner Tube
Part # Length Ref. No.
600-6863 1.5m (59-1/16”) 57A25
604-6863 1.0m (39-3/8”) 39A33
Outer Tube
Part # Description Ref. No.
13005000 4 per kit 5A50
Easy Lock™ Replacement Kit
Call Toll Free 1-800-457-5348 PAGE 151AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Bondioli, Pavesi, and Walterscheid
8 Series
Part # A. Bore B. Keyway Ref. No.
800-682235mm
(1-3/8”)5/16” 49A22
800-682438.1mm (1-1/2”)
3/8” 49A22
800-682844.5mm (1-3/4”)
3/8” 53A94
800-683250.8mm
(2”)1/2” 68A35
Implement YokeRound Bore With Keyway And Set Screw
Part # A. Bore Ref. No.
801-6806 1-3/8” x 6 spl. 35A20
Implement YokeSpline bore with pinhole
Part # A. Bore Ref. No.
807-6806 1-3/8” x 6 spl. 43A85
807-6820 1-3/4” x 20 spl. 67A07
807-6821 1-3/8” x 21 spl. 52A55
Implement YokeClamp Yoke
Part # Overall Drive Length Ref. No. Bearing Kit (2 per kit) Ref. No.
900-4548 48” 75A20 961-4589 17A55
900-4560 60” 79A77 961-4589 17A55
GuardOrder bearings as required
PAGE 152 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Walterscheid
2100/100 Series
Part # A. Bore Ref. No.
101-7106 1-3/8” x 6 spl. 16A90
101-7121 1-3/8” x 21 spl. 21A55
Tractor YokeSafety Slide Lock
Part # A. Bore Ref. No.
102-7106 1-3/8” x 6 spl. 18A10
102-7121 1-3/4” x 20 spl. 18A10
Tractor YokeQuick Disconnect
Part # A B Ref. No.
200-715522mm (7/8”)
54.8mm (2-5/32”)
12A57
Cross & Bearing Kit (R-Kit)Snap ring located in yoke
Part # A. Bore Ref. No.
300-7123 28.3mm (15/16”) 16A62
Inner Profi le YokeWith bearing grove (guard must rotate freely on yoke)
Part # A. Bore Ref. No.
700-7130 30mm (1-3/16”) 22A90
Outer Profi le YokeWith bearing grove (guard must rotate freely on yoke)
Call Toll Free 1-800-457-5348 PAGE 153AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Walterscheid
2100/100 Series
Part # Length Ref. No.
400-7123 1.5m (59-1/16”) 35A28
400-7123 1m (39-3/8”) 27A01
Inner Tube
Part # Length Ref. No.
600-7130 1.5m (59-1/16”) 22A58
600-7130 1m (39-3/8”) 17A24
Outer Tube
Part # A. Bore B. Keyway Ref. No.
800-712525mm
(63/64”)8mm
(5/16”)19A65
800-713030mm
(1-3/16”)8mm
(5/16”)19A65
Implement YokeRound Bore With Keyway And Set Screw
Part # A. Bore Ref. No.
802-7108 25.4mm (1”) 17A08
802-7110 31.8mm (1-1/4”) 17A08
802-7125 25mm (63/64”) 17A08
802-7130 30mm (1-3/16”) 17A08
Implement YokeShear Pin With Pinhole
PAGE 154 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Walterscheid
2100/100 Series
Part # A B Ref. No.
508-08508mm
(5/16”)50mm
(1-31/32 ”)0A99
Roll Pin
Part # Description Ref. No.
13005000 4 per kit 5A50
Easy Lock™ Replacement Kit
Part # Overall Drive Length Ref. No. Bearing Kit (2 per kit) Ref. No.
900-2548 48” 54A79 961-5005 9A95
900-2560 60” 66A43 961-5005 9A95
Plastic GuardOrder bearings as required
Call Toll Free 1-800-457-5348 PAGE 155AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Walterscheid
2200/200 Series
Part # A. Bore Ref. No.
101-8206 1-3/8” x 6 spl. 22A50
101-8221 1-3/8” x 21 spl. 22A50
Tractor YokeSafety Slide Lock
Part # A. Bore Ref. No.
102-8206 1-3/8” x 6 spl. 21A70
102-8220 1-1/8” x 6 spl. 21A70
102-8221 1-3/8” x 21 spl. 21A70
Tractor YokeQuick Disconnect
Part # A B Ref. No.
200-826128.3mm (15/16”)
61.2mm (2-13/32”)
12A40
Cross & Bearing Kit (R-Kit)Snap ring located in yoke
Part # A. Bore Ref. No.
300-7234 34.5mm (1-23/64”) 18A72
Inner Profi le YokeWith bearing grove (guard must rotate freely on yoke)
Part # A. Bore Ref. No.
700-7241 41.3mm (1-5/8”) 23A55
Outer Profi le YokeWith bearing grove (guard must rotate freely on yoke)
PAGE 156 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
2200/200 Series
Part # Length Ref. No.
400-7234 1.5m (59-1/16”) 31A55
400-7234 1m (39-3/8”) 26A40
Inner Tube
Part # Length Ref. No.
600-7241 1.5m (59-1/16”)
600-7241 1m (39-3/8”)
Outer Tube
Part # A. Bore B. Keyway Ref. No.
800-822525mm
(63/64”)8mm
(5/16”)19A59
800-820825.4mm
(1”)6.4mm (1/4”)
19A59
800-823030mm
(1-3/16”)8mm
(5/16”)19A59
800-821031.8mm (1-1/4”)
6.4mm (1/4”)
19A59
800-821134.9mm (1-3/8”)
8mm (5/16”)
19A59
800-821828.6mm (1-1/8”)
6.4mm (1/4”)
19A59
800-822031.8mm (1-1/4”)
8mm (5/16”)
19A59
Implement YokeRound Bore With Keyway And Set Screw
Part # A B Ref. No.
508-106010mm
(24/64”)60mm
(2-23/64”)1A45
Roll Pin
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Walterscheid
Call Toll Free 1-800-457-5348 PAGE 157AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
2200/200 Series
Part # Description Ref. No.
13005000 4 per kit 5A50
Easy Lock™ Replacement Kit
Part # Overall Drive Length Ref. No. Bearing Kit (2 per kit) Ref. No.
900-2548 48” 54A79 961-5005 9A95
900-2560 60” 66A43 961-5005 9A95
GuardOrder bearings as required
Part # A. Bore Ref. No.
802-8220(with 3/8”pinhole)
31.8mm (1-1/4”) 29A51
802-8222(with 1/2”pinhole)
35mm (1-3/8”) 29A51
802-8225(with 5/16”
pinhole)25mm (63/64”) 23A20
802-8230(with 25/64”
pinhole)30mm (1-3/16”) 23A20
Implement YokeShear Pin
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Walterscheid
PAGE 158 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
2300/210 Series
Part # A. Bore Ref. No.
101-8406 1-3/8” x 6 spl. 25A20
101-8421 1-3/8” x 21 spl. 25A20
Tractor YokeSafety Slide Lock
Part # A. Bore Ref. No.
102-8406 1-3/8” x 6 spl. 22A55
102-8418 1-1/8” hex 26A51
102-8421 1-3/8” x 21 spl. 24A47
Tractor YokeQuick Disconnect
Part # A. Bore Ref. No.
104-8406 1-3/8” x 6 spl. 73A55
104-8420 1-3/4” x 20 spl. 73A55
104-8421 1-3/8” x 21 spl. 73A55
Tractor YokeBall Shear
Part # A B Ref. No.
200-847427mm
(1-1/16”)74.6mm
(2-15/16”)15A47
Cross & Bearing Kit (R-Kit)Snap ring located in yoke
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Walterscheid
Call Toll Free 1-800-457-5348 PAGE 159AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
2300/210 Series
Part # A. Bore Ref. No.
300-7434 34.5mm (1-11/32”) 22A50
Inner Profi le YokeWith bearing grove (guard must rotate freely on yoke)
Part # A. Bore Ref. No.
700-7441 41.3mm (1-5/8”) 24A50
Outer Profi le YokeWith bearing grove (guard must rotate freely on yoke)
Part # Length Ref. No.
400-7234 1.5m (59-1/16”) 31A55
404-7234 1m (39-3/8”) 27A20
Inner Tube
Part # Length Ref. No.
600-7241 1.5m (59-1/16”) 29A60
604-7241 1m (39-3/8”) 22A71
Outer Tube
Part # A B Ref. No.
508-106510mm
(24/64”)65mm
(2-9/16”)1A47
Roll Pin
Part # Description Ref. No.
13005000 4 per kit 5A50
Easy Lock™ Replacement Kit
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Walterscheid
PAGE 160 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
2300/210 Series
Part # A. Bore Ref. No.
802-8420 31.8mm (1-1/4”) 27A30
802-8430 35mm (1-3/16”) 27A30
802-8435 35mm (1-3/16”) 27A30
Implement YokeShear Pin
Part # A. Bore B. Keyway Ref. No.
800-843030mm
(1-3/16”)8mm
(5/16”)31A09
800-841031.8mm (1-1/4”)
6.4mm (1/4”)
31A09
800-841134.9mm (1-3/8”)
8mm (5/16”)
31A09
800-842431.8mm (1-1/2”)
9.5mm (3/8”)
31A09
800-823535mm
(1-3/8”)10mm
(25/64”)31A09
Implement YokeRound Bore With Keyway And Set Screw
Part # Overall Drive Length Ref. No. Bearing Kit (2 per kit) Ref. No.
900-2548 48” 54A79 961-5005 9A95
900-2560 60” 66A43 961-5005 9A95
GuardOrder bearings as required
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Walterscheid
Call Toll Free 1-800-457-5348 PAGE 161AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
2400 Series
Part # A. Bore Ref. No.
101-7606 1-3/8” x 6 spl. 34A60
101-7620 1-3/4” x 20 spl. 39A83
101-7621 1-3/8” x 21 spl. 34A60
Tractor YokeSafety Slide Lock
Part # A. Bore Ref. No.
102-7606 1-3/8” x 6 spl. 32A96
102-7620 1-3/4” x 20 spl. 53A23
102-7621 1-3/8” x 21 spl. 32A96
Tractor YokeQuick Disconnect
Part # A. Bore Ref. No.
104-7606 1-3/8” x 6 spl. 70A03
104-7620 1-3/4” x 20 spl. 72A50
104-7621 1-3/8” x 21 spl. 72A50
Tractor YokeBall Shear
Part # A B Ref. No.
200-767632mm
(1-1/4”)76mm (3”)
28A07
Cross & Bearing Kit (R-Kit)Snap ring located in yoke
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Walterscheid
PAGE 162 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Walterscheid
2400 Series
Part # A. Bore Ref. No.
300-7639 (lemon) 39.5mm (1-9/16”) 41A86
300-7651 (star) 51.4mm (2-1/64”) 44A93
Inner Profi le YokeWith bearing grove (guard must rotate freely on yoke)
Part # Length Ref. No.
400-7539 (lemon) 1.5m (59-1/16”) 44A79
400-7651 (star) 1.5m (59-1/16”) 73A10
404-7539 (lemon) 1m (39-3/8”) 35A35
Inner Tube
Part # Length Ref. No.
600-7548(lemon) 1.5m (59-1/16”) 36A20
600-7661 (star) 1.5m (59-1/16”) 61A30
Outer Tube
Outer Profi le YokeWith bearing grove (guard must rotate freely on yoke)
Part # A. Bore Ref. No.
700-7648 (lemon) 48mm (1-7/8”) 32A99
700-7661 (star) 61mm (2-13/32”) 34A07
Part # A B Ref. No.
508-107510mm
(25/64”)75mm
(2-61/64”)1A45
Roll Pin
Part # Description Ref. No.
13005000 4 per kit 5A50
Easy Lock™ Replacement Kit
Call Toll Free 1-800-457-5348 PAGE 163AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Walterscheid
2400 Series
Part # A. Bore Ref. No.
802-7611 35mm (1-3/8”) 34A93
802-7640 40mm (1-37/64”) 36A67
Implement YokeShear Pin With Pinhole
Part # A. Bore B. Keyway Ref. No.
800-761031.8mm (1-1/4”)
6.4mm (1/4”)
38A77
800-7611254.9mm (1-3/8”)
8mm (5/16”)
38A77
800-763535mm
(1-3/8”)10mm
(25/64”)38A77
800-764040mm
(1-37/64”)12mm
(15/32”)38A77
Implement YokeRound Bore With Keyway And Set Screw
Part # A. Bore Ref. No.
102-7606 1-3/8” x 6 spl 32A96
102-7620 1-3/4” x 20 spl 53A23
102-7621 1-3/8” x 21 spl 32A96
Implement YokeClamp Yoke
Part # Overall Drive Length Ref. No. Bearing Kit (2 per kit) Ref. No.
902-3548 48” 75A79 961-3525 14A97
902-3560 60” 86A44 961-3525 14A97
GuardOrder bearings as required
PAGE 164 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
2500 Series
Part # A. Bore Ref. No.
101-7906 1-3/8” x 6 spl. 34A54
101-7920 1-3/4” x 20 spl. 46A49
101-7921 1-3/8” x 21 spl. 34A54
Tractor YokeSafety Slide Lock
Part # A. Bore Ref. No.
102-7906 1-3/8” x 6 spl. 34A54
102-7920 1-3/4” x 20 spl. 44A10
102-7921 1-3/8” x 21 spl. 37A96
Tractor YokeQuick Disconnect
Part # A. Bore Ref. No.
110-7906 1-3/8” x 6 spl. 62A50
Auto-Lok
Part # A B Ref. No.
200-798636mm
(1-27/64”)88.8mm (3-1/2”)
12A40
Cross & Bearing Kit (R-Kit)Snap ring located in yoke
Part # A B Ref. No.
508-109010mm
(25/64”)90mm
(3-35/64”)1A75
Roll Pin
Part # Description Ref. No.
13005000 4 per kit 5A50
Easy Lock™ Replacement Kit
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Walterscheid
Call Toll Free 1-800-457-5348 PAGE 165AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Walterscheid
2500 Series
Part # A. Bore Ref. No.
300-7234 34.5mm (1-23/64”) 18A72
Inner Profi le YokeWith bearing grove (guard must rotate freely on yoke)
Part # A. Bore Ref. No.
700-7241 41.3mm (1-5/8”) 23A55
Outer Profi le YokeWith bearing grove (guard must rotate freely on yoke)
Part # Length Ref. No.
400-7234 1.5m (59-1/16”) 31A55
400-7234 1m (39-3/8”) 26A40
Inner Tube
Part # Length Ref. No.
600-7961 1.5m (59-1/16”) 63A50
600-7961 1m (39-3/8”) 54A50
Outer Tube
Part # Overall Drive Length Ref. No. Bearing Kit (2 per kit) Ref. No.
902-3548 48” 75A79 961-3525 14A97
902-3560 60” 86A44 961-3525 14A97
GuardOrder bearings as required
PAGE 166 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Part # A. Bore B. Keyway Ref. No.
800-792235mm
(1-3/8”)8mm
(5/16”)62A15
800-792431.8mm (1-1/2”)
9.5mm (3/8”)
62A15
800-792844.4mm (1-3/4”)
10mm (3/8”)
94A43
800-793535mm
(1-3/8”)10mm
(25/64”)62A15
Implement YokeRound Bore With Keyway And Set Screw
Part # A. Bore Ref. No.
807-7906 1-3/8” x 6 spl. 43A59
807-7920 1-3/4” x 20 spl. 47A56
807-7921 1-3/8” x 21 spl. 47A56
Implement YokeClamp Yoke
Part # A. Bore Ref. No.
802-7922 35mm (1-3/8”) 65A75
802-7924 31.8mm (1-1/2”) 79A55
Implement YokeShear Pin With Pinhole
2500 Series
Part # A. Bore Ref. No.
801-7921 1-3/8” x 21 spl. 48A44
Implement YokeSpline Bore
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Walterscheid
Call Toll Free 1-800-457-5348 PAGE 167AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Walterscheid
2600 Series
Part # A. Bore Ref. No.
101-7006 1-3/8” x 6 spl. 57A50
101-7020 1-3/4” x 20 spl. 83A55
101-7021 1-3/8” x 21 spl. 57A50
Tractor YokeSafety Slide Lock
Part # A. Bore Ref. No.
102-7006 1-3/8” x 6 spl. 52A53
102-7020 1-3/4” x 20 spl. 78A64
102-7021 1-3/8” x 21 spl. 52A53
Tractor YokeQuick Disconnect
Part # A B Ref. No.
200-700442mm
(1-21/32”)104mm
(4-3-32”)70A78
Cross & Bearing Kit (R-Kit)Snap ring located in yoke
Part # A. Bore Ref. No.
300-7061 61mm (2-13/32”) 47A55
Inner Profi le YokeWith bearing grove (guard must rotate freely on yoke)
Part # A. Bore Ref. No.
700-7071 71.7mm (-53/64”) 56A55
Outer Profi le YokeWith bearing grove (guard must rotate freely on yoke)
Part # Description Ref. No.
13005000 4 per kit 5A50
Easy Lock™ Replacement Kit
PAGE 168 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Part # Length Ref. No.
600-7961 1.5m (59-1/16”) 63A50
600-7961 1m (39-3/8”) 54A50
Inner Tube
Part # Overall Drive Length Ref. No. Bearing Kit (2 per kit) Ref. No.
900-4548 48” 75A20 961-4535 14A37
900-4560 60” 79A77 961-4535 14A37
GuardOrder bearings as required
Part # A B Ref. No.
508-131013mm (1/2”)
100mm (3-15/16”)
1A75
Roll Pin
2600 Series
Part # Length Ref. No.
600-7071 1.5m (59-1/16”) 118A70
600-7071 1m (39-3/8”) 105A60
Outer Tube
Part # A. Bore B. Keyway Ref. No.
800-7024 31.8mm (1-1/2”) 3/8” 59A40
800-7026 41.3mm (1-5/8”) 3/8” 59A40
800-7028 44.5mm (1-3/4”) 3/8” 59A40
800-7032 50.8mm (2”) 1/2” 67A50
Implement YokeRound Bore With Keyway And Set Screw
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Walterscheid
Call Toll Free 1-800-457-5348 PAGE 169AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Walterscheid
2380 Series
Part # A. Bore Ref. No.
107-8406 1-3/8” x 6 spl. 81A58
107-8421 1-3/8” x 21 spl. 88A17
Tractor YokeSafety Slide Lock, Ring Grove
Part # A. Bore Ref. No.
109-8406 1-3/8” x 6 spl. 105A82
Tractor YokeQuick Disconnect
Part # A B C Ref. No.
200-749174.6mm
(2-15/16”)91mm
(3-37/64”)27mm
(1-1/16”)46A55
Cross & Bearing Kit (R-Kit)Snap ring located in yoke
Part # A. Bore Ref. No.
301-7434 34.5mm (1-23/64”) 42A10
301-7439 39.5mm (1-9/16”) 52A50
Inner Profi le YokeWith bearing grove (guard must rotate freely on yoke)
PAGE 170 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Walterscheid
2380 Series
Part # Length Ref. No.
406-7234 1000mm (39-3/8”) 104A85
Inner Tube
Part # Length Ref. No.
606-7241 1000mm (39-3/8”) 69A23
Outer Tube
Part # A. Bore Ref. No.
700-7441 41mm (1.614”) 24A50
Outer Profi le YokeWith bearing grove (guard must rotate freely on yoke)
Part # A B Ref. No.
508-106510mm
(25/64”)65mm
(2-9/16”)1A47
Roll Pin
Part # A. Bore B. Bore Ref. No.
155074061-3/8”x 6 spl
34.5mm(1.358”)
352A00
80 C.V. Joint
Call Toll Free 1-800-457-5348 PAGE 171AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Walterscheid
2480 Series
Part # A. Bore Ref. No.
107-7606 1-3/8” x 6 spl. 132A55
107-7620 1-3/4” x 20 spl. 149A33
107-7621 1-3/8” x 21 spl. 132A55
Tractor YokeSafety Slide Lock, Ring Grove
Part # A. Bore Ref. No.
109-76 1-3/8” x 6 spl. 72A98
109-76 1-3/4” x 20 spl. 97A55
109-76 1-3/8” x 21 spl. 85A50
Tractor YokeQuick Disconnect
Part # A B C D Ref. No.
200-769476mm
(2-63/64”)94mm
(3-45/64”)27mm
(1-1/16”)32mm
(1-7/64”) 53A46
Cross & Bearing Kit (R-Kit)Snap ring located in yoke
Part # A. Bore Ref. No.
301-7639 40mm (1-9/16”) 55A62
301-7651 51mm (2-1/64”) 62A37
Inner Profi le YokeWith bearing grove (guard must rotate freely on yoke)
Part # A. Bore Ref. No.
700-7648 48mm (1-7/16”) 32A99
Outer Profi le YokeWith bearing grove (guard must rotate freely on yoke)
PAGE 172 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Walterscheid
2480 Series
Part # A Length Ref. No.
402-763940mm
(1-9/16”)1000mm (39-3/8”)
87A55
Inner Tube
Part # Length Ref. No.
606-7648 1000mm (39-3/8”) 83A55
Outer Tube
Part # A B Ref. No.
508-108010mm
(13/32”)80mm
(3-5/32”)1A75
Roll Pin
Part # Description Ref. No.
13005000 4 per kit 5A50
Easy Lock™ Replacement Kit
Part # Overall Drive Length Ref. No. Bearing Kit (2 per kit) Ref. No.
912-7448 48” 81A94 961-0035 13A91
912-7666 60” 102A33 961-0035 13A91
GuardOrder bearings as required
Call Toll Free 1-800-457-5348 PAGE 173AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Walterscheid
2580 Series
Part # A. Bore Ref. No.
107-7906 1-3/8” x 6 spl. 99A05
107-7920 1-3/4” x 20 spl. 149A33
107-7921 1-3/8” x 21 spl. 110A90
Tractor YokeSafety Slide Lock, Ring Grove
Part # A B C D Ref. No.
200-790688.8mm (3.49”)
106mm 32mm 36mm 98A50
Cross & Bearing Kit (R-Kit)Snap ring located in yoke
Part # A. Bore Ref. No.
302-7951 51mm (2”) 87A50
Inner Profi le YokeWith bearing grove (guard must rotate freely on yoke)
Part # A. Bore Ref. No.
700-7961 61mm (2-3/8”) 47A50
Outer Profi le YokeWith bearing grove (guard must rotate freely on yoke)
PAGE 174 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Weasler, Neapco, Eurocardan Metric P.T.O. Assemblies & ComponentsInterchanges with Walterscheid
2580 Series
Part # A Length Ref. No.
406-795110mm
(13/32”)1000mm (39-3/8”)
99A88
Inner Tube
Part # Length Ref. No.
600-7961 1500mm (59-1/16”) 63A50
600-7961 1000mm (39-3/8”) 54A50
Outer Tube
Part # A B Ref. No.
508-109010mm
(13/32”)90mm
(3-1/2””)1A47
Roll Pin
Part # A. Bore B. Bore Ref. No.
15507906 1-3/8”x 6 spl.
51mm (2”) 383A00
156079201-3/4”
x 20 spl.51mm (2”) 383A00
157079211-3/8”
x 21 spl.51mm (2”) 383A00
80 C.V. Joint
Part # Ref. No.
550-7900 POR
Center Housing
Call Toll Free 1-800-457-5348 PAGE 175AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Metric Drivelines
Agri # Series A. Length Tractor Yoke Implement Yoke Ref. No.
14006340 3 40” 1-3/8” x 6 spl. QD 1-3/8” x 6 spl. QD 101A4614006446 4 46” 1-3/8” x 6 spl. QD 1-3/8” x 6 spl. QD 106A1214006637 6 37” 1-3/8” x 6 spl. QD 1-3/8” x 6 spl. QD 129A76
Finishing Mowers
Agri # Series A. Length Tractor Yoke Implement Yoke Ref. No.
14006424 4 48” 1-3/8” x 6 spl. QD 1-1/2” 104A8514006524 5 48” 1-3/8” x 6 spl. QD 1-1/2” 107A8314006624 6 48” 1-3/8” x 6 spl. QD 1-1/2” 115A2814016524 5 48” 1-3/8” x 21 spl. QD 1-1/2” 115A2514016624 6 48” 1-3/8” x 21 spl. QD 1-1/2” 140A25
Catfi sh Pond Aerator Driveline
Agri # Series Type A. Length Tractor Yoke Implement Yoke Ref. No.
14006432 4 4ft. lift 32” 1-3/8” x 6 spl. QD 1-3/8” rd. w/ pinhole 104A8514006436 4 5ft. lift 36” 1-3/8” x 6 spl. QD 1-3/8” rd. w/ pinhole 130A4414006442 4 6ft. lift 42” 1-3/8” x 6 spl. QD 1-3/8” rd. w/ pinhole 108A3514006542 5 6ft. lift 42” 1-3/8” x 6 spl. QD 1-3/8” rd. w/ pinhole 127A7714006546 5 6ft. lift HD 46” 1-3/8” x 6 spl. QD 1-3/8” rd. w/ pinhole 139A9214006551 5 6ft. lift 51” 1-3/8” x 6 spl. QD 1-3/8” rd. w/ pinhole 132A2514006652 6 7ft. lift 52” 1-3/8” x 6 spl. QD 1-3/8” rd. w/ pinhole 152A25
31361 5 6ft. lift 46” 1-3/8” x 6 spl. QD 1-3/8” rd. w/ pinhole 152A25
Rotary Cutter
Agri # Series Type A. Length Tractor Yoke Implement Yoke Ref. No.
14106438 4 pull 38” 1-3/8” x 6 spl. QD 1-3/8” x 6 spl w/friction clutch 145A50
14106546 5 pull 46” 1-3/8” x 6 spl. QD 1-3/8” x 6 spl w/friction clutch 213A72
14106654 6 7’ lift 54” 1-3/8” x 6 spl. QD 1-3/8” x 6 spl w/friction clutch 274A99
14106660 6 7’ lift 60” 1-3/8” x 6 spl. QD 1-3/8” x 20 spl w/friction clutch 469A24
Rotary Cutter
PAGE 176 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Metric Drivelines
Agri # Series A. Length Tractor Yoke Implement Yoke Ref. No.
14306538 5 38” 1-3/8” x 6 spl. QD 1-3/8” x 6 spl. QD w/overruning clutch 151A14
14306639 6 39” 1-3/8” x 6 spl. QD 1-3/8” x 6 spl. QD w/overruning clutch 210A12
Disc Mover with Overrunning Clutch
Agri # Series A. Length Tractor Yoke Implement Yoke Ref. No.
14006247 2 47” 1-3/8” x 6 spl. QD 1-3/8” x 6 spl. QD 108A90
14006448 4 48” 1-3/8” x 6 spl. QD 1-3/8” x 6 spl. QD 119A51
14006555 5 55” 1-3/8” x 6 spl. QD 1-3/8” x 6 spl. QD 144A10
14006657 6 57” 1-3/8” x 6 spl. QD 1-3/8” x 6 spl. QD 140A97
14006857 8 57” 1-3/8” x 6 spl. QD 1-3/8” x 6 spl. QD 164A50
14006360 3 60” 1-3/8” x 6 spl. QD ** 123A20
14006460 4 60” 1-3/8” x 6 spl. QD ** 123A20
14006560 5 60” 1-3/8” x 6 spl. QD ** 123A20
14006660 6 60” 1-3/8” x 6 spl. QD ** 135A50
14006760 7 60” 1-3/8” x 6 spl. QD ** 135A50
14006860 8 60” 1-3/8” x 6 spl. QD ** 193A93
** These drivelines are furnished without cross & bearing kit and implement. Select kit and yoke as required.
All Purpose Metric Drivelines
Agri # Description Tractor Yoke Implement Yoke Ref. No.
14627955 KMC Complete Shaft 1-3/8” X 21 spl 1-3/8” X 21 spl clamp 621A23
93-14617955 KMC Shaft Half 1-3/8” X 21 spl 478A55
92-14627955 KMC Tube Shaft 1-3/8” X 21 spl clamp 152A68
14727955 KMC Complete Shaft 1-3/4” X 20 spl 1-3/8” X 21 spl clamp 621A23
93-14707955 KMC Shaft Half 1-3/4” X 20 spl 478A55
92-14627955 KMC Tube Shaft 1-3/8” X 21 spl clamp 152A68
14637955 Amadas Complete Shaft 1-3/8” X 21 spl 1-3/8” X 21 spl w/pinhole 152A68
93-14607955 Amadas Shaft Half 1-3/8” X 21 spl 621A23
92-14637955 Amadas Tube Shaft 1-3/8” X 21 spl w/pinhole 478A55
Peanut Harvester for Armadas and KMC
Call Toll Free 1-800-457-5348 PAGE 177AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Mower & Combine Header Drivelines
Interchanges with Bush Hog® Models 2615 and 3615
Part # Ref. No. Tractor Yoke Size Ref. No. Clamp Yoke Size Ref. No. Series
14507955 649A65 93-14517955 1-3/8” x 6 spl 469A92 92-14507955 1-3/8” x 6 spl 152A73 2580
14607955 649A65 93-14617955 1-3/8” x 21 spl 433A70 92-14507955 1-3/8” x 6 spl 152A73 2580
14707955 649A65 93-14717955 1-3/4” x 20 spl 433A70 92-14507955 1-3/8” x 6 spl 152A73 2580
Flex Wing Mowers
Constant Velocity Drivelines
Interchanges with Rhino® Models SR-15 and SE-15
Part # Ref. No. Tractor Yoke Size Ref. No. Clamp Yoke Size Ref. No. Series
14507951 564A27 93-14507951 1 3/8” x 6 spl 421A50 92-14507951 1 3/4” x 20 spl 143A07 2580
14607951 564A27 93-14607951 1 3/8” x 21 spl 421A50 92-14507951 1 3/4” x 20 spl 143A07 2580
14707951 564A27 93-14707951 1 3/4” x 20 spl 421A50 92-14507951 1 3/4” x 20 spl 143A07 2580
Interchanges with John Deere® Models 1517, 1518, 2018
Part # Ref. No. Tractor Yoke Size Ref. No. Clamp Yoke Size Ref. No. Series
14517955 649A65 93-14517955 1-3/8” x 6 spl 469A92 92-14517955 1-3/4” x 20 spl 152A73 2580
14617955 649A65 93-14617955 1-3/8” x 21 spl 469A92 92-14517955 1-3/4” x 20 spl 152A73 2580
14717955 649A65 93-14717955 1-3/4” x 20 spl 469A92 92-14517955 1-3/4” x 20 spl 152A73 2580
Overall compression length: Bush Hog and John Deere - 55”; Rhino - 51”
Combine Header
Metric Driveline
Part # Ref. No. Combine Yoke Header Yoke OAL Description Series
14007635 202A12 1-3/8” x 21 spl 1-1/8” Hex Clamp 35” Deere headers using two (2) drivelines per header 2400
14007631 202A12 1-3/8” x 21 spl 1-1/8” Hex Clamp 31” Deere headers using one (1) drivelines per header 2400
14007633 202A12 1-1-8” x Hex SSL 1-1/8” Hex Clamp 33” Case IH combine using Deere header 2400
PAGE 178 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Friction Disc Slip Clutch
Agri # Series Type Description Ref. No.1343018 3 A Complete Torque Limiter with yoke 1-3/8” 6 spl P.O.R.
1344018 4 A Complete Torque Limiter with yoke 1-3/8” 6 spl P.O.R.
1345018 5 A Complete Torque Limiter with yoke 1-3/8” 6 spl P.O.R.
1346018 6 A Complete Torque Limiter with yoke 1-3/8” 6 spl P.O.R.
1356104 All B Slip Clutch Attachment with yoke 1-3/8” 6 spl P.O.R.
1356242 All C Slip Clutch Attachment with yoke 1-3/8” 6 spl - smooth shaft P.O.R.
1805010 All Replacement Friction Disc 140mm with 3-5/16” hole 9A95
Standard 2 Disc 8000 In. lb. Torque
Agri # Series Type Description Ref. No.1385018 5 A Complete Torque Limiter with yoke 1-3/8” 6 spl P.O.R.
1386018 6 A Complete Torque Limiter with yoke 1-3/8” 6 spl P.O.R.
1406028 6 A Complete Torque Limiter with yoke 1-3/4” 20 spl P.O.R.
1386016 6 A Complete Torque Limiter with yoke 1-3/8” I.B.* P.O.R.
* New style with interferring bolt for safety
Heavy Duty 2 Disc 10,600 In. lb. Torque
Agri # Series Type Description Ref. No.6 A Complete Torque Limiter with yoke 1-3/8” 6 spl P.O.R.
6 A Complete Torque Limiter with yoke 1-3/4” 20 spl P.O.R.
Heavy Duty 4 Disc 12,850 In. lb. Torque
Agri # Series Type Description Ref. No.1468031 8 A Complete Torque Limiter with yoke 1-3/8” 6 spl P.O.R.
1468034 8 A Complete Torque Limiter with yoke 1-3/4” 20 spl P.O.R.
1456030 6/7/8 B Slip Clutch Attachment with male shaft 1-3/8” 6 spl P.O.R.
1808010 All Replacement Friction Disc 160mm with 3-13/16” hole 9A95
Heavy Duty 2 Disc 10,600 In. lb. Torque
Agri # Description Ref. No.13006121 Kit for 1-3/8” x 6 spl & 21 spl Bondioli Series 1, 2, 3, 4, 5, 6, 7, 8, and 9 Series 2A95
13006720 Kit for 7N Series 1-3/4” 20 spl 6A25
13007120 Kit for 1-3/4” 20 spl All Walterscheid Series, Spring Internal to Yoke 2A25
13007138 Kit for 1-3/8” 6 spl & 21 spl. All Walterscheid Series. 2A25
Q.D. Repair Kits
Call Toll Free 1-800-457-5348 PAGE 179AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
PB Blaster® Penetrating Catalyst
Part # Description Ref. No.
PB101 12oz. Spray Can (12 per case) 43A50
PB128 1 Gallon Can (4 per case) 89A98
PB Blaster® Penetrating Catalyst is the most power penetrant and
lubricant on the market for loosening nuts and bolts, ripping through
rust, and penetrating and lubricating the tightest crevices.
PB Blaster® Penetrating Catalyst
• Conditions
• Lubricates
• Coats
• Penetrates
• Dielectric spray nozzle directs lubricant exactly
• Environmentally safe
• Non-evaporating copolymer formulation
• Capillary action actually pulls itself uphill
• Reaches into remote cracks and crevices
• Works upside down
PAGE 180 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Hydraulic Cylinders
DB-ASAE CYLINDERSThe DB-ASAE cylinders are designed for use where ASAE 8” and 16” stroke cylinders are required.
These cylinders have a uniform close center length, 20.25” and 31.50”, for 16”.
Part # Bore Stroke Rod Size Closed Center Port Pin Reference
208DB 2” 8” 1.06” 20.25” 3/8” 1” 98A69
2508DB 2 1/2” 8” 1.06” 20.25” 3/8” 1” 106A86
308DB 3” 8” 1.25” 20.25” 1/2” 1” 111A76
316DB 3” 16” 1.25” 31.50” 1/2” 1 1/4” 146A25
3508DB 3 1/2” 8” 1.25” 20.25” 1/2” 1” 127A46
3516DB 3 1/2” 16” 1.50” 31.50” 1/2” 1 1/4” 178A98
508DB 5” 8” 1.50” 20.35” 1/2” 1” 281A52
516DB 5” 16” 2.00” 31.50” 1/2” 1 1/4” 324A75
DE-ASAE CYLINDERS WITH MECHANICAL DEPTH STOPSThese are the same as the DB-ASAE cylinders except these include a mechanical depth stop.
Part # Bore Stroke Rod Size Closed Center Port Pin Reference
308DE 3” 8” 1.25” 20.25” 1/2” 1” 125A01
2508DB 4” 8” 1.25” 20.25” 1/2” 1” 106A86
• ASAE and NON-ASAE
• Standard tie rod
• Rods are hardened and chrome plated
• Cylinder barrels are skived
Call Toll Free 1-800-457-5348 PAGE 181AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Hydraulic Cylinders
NON-ASAE STANDARD CYLINDERS
Part # Bore Stroke Rod Size Closed Center Port Pin Reference
204DB 2” 4” 1.06” 14.25” 3/8” 1” 91A99
206DB 2” 6” 1.06” 16.25” 3/8” 1” 95A17
210DB 2” 10” 1.06” 20.25” 3/8” 1” 98A50
212DB 2” 12” 1.06” 22.25” 3/8” 1” 105A22
214DB 2” 14” 1.06” 24.25” 3/8” 1” 102A25
216DB 2” 16” 1.06” 26.25” 3/8” 1” 110A56
2510DB 2 1/2” 10” 1.06” 20.25” 3/8” 1” 91A08
2512DB 2 1/2” 12” 1.06” 20.25” 3/8” 1” 92A20
310DB 3” 10” 1.25” 20.25” 1/2” 1” 110A55
312DB 3” 12” 1.25” 22.25” 1/2” 1” 130A03
314DB 3” 14” 1.25” 24.25” 1/2” 1” 134A22
316DB 3” 16” 1.25” 31.50” 1/2” 1-1/4” 146A25
324DB 3” 24” 1.25” 34.25” 1/2” 1” 155A60
3510DB 3 1/2” 10” 1.25” 20.25” 1/2” 1” 135A68
410DB 4” 10” 1.25” 20.62” 1/2” 1” 163A36
412DB 4” 12” 1.25” 22.62” 1/2” 1” 170A30
• ASAE and NON-ASAE
• Standard tie rod
• Rods are hardened and chrome plated
• Cylinder barrels are skived
PAGE 182 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Cross Rephasing CylindersDCR and DR Series
DCR and DR cylinders incorporate an internal piston bypass for synchronizing (rephasing) cylinders in a series circuit.
The DCR also features a hydraulic depth control with adjustment from 0” to 8” stroke for use as a master cylinder in a
system with DR slave cylinders. These systems are widely used on tillage tool implements.
All cylinders are plumbed. Bores and rod diameters are volumetrically matched so that all cylinder robs move equal
when stroked. At the end of stroke system is resynchronized through the piston bypass in each cylinder.
• 2500 psi work pressure
• Clevis mounting
• 3/4-16 SAE ports
• Hardened and chrome plated rods
• Close tolerance head seals to prevent
system contamination
• Top porting DCR
• Ports in line with pins on DR
DCR SERIES
Part # Bore Stroke Closed Center Length Rod Dia. Clevis Pin Dia. Ref. No.
3508DCR 3 1/2” 8” 20 1/4” 1 1/4” 1” 280A97
408DCR 4” 8” 20 1/4” 1 3/8” 1” 335A10
DR SERIES
Part # Bore Stroke Closed Center Length Rod Dia. Clevis Pin Dia. Ref. No.
308DR 3” 8” 20 1/4” 1 1/4” 1” 172A34
3508DR 3 1/2” 8” 20 1/4” 1 1/4” 1” 190A60
37508DR 3 3/4” 8” 20 1/4” 1 3/8” 1” 239A30
42508DR 4 1/4” 8” 20 1/4” 1 3/8” 1 1/4” 302A20
4508DR 4 1/2” 8” 20 1/4” 1 1/2” 1 1/4” 306A15
47508DR 4 3/4” 8” 20 1/4” 1 1/2” 1 1/4” 306A75
508DR 5” 8” 20 1/4” 1 1/2” 1 1/4” 351A11
Call Toll Free 1-800-457-5348 PAGE 183AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Cylinder Replacement Parts
Part # Description List # Ref. No.
204DB Cylinder 1.06” Rod
1D0203-875 Rod 1 18A51
1D1003-3 Clevis 2 23A42
1D1153-3 Head 3 18A95
1D1401-200 Piston 4 11A25
1D1503-3 Base 5 22A56
1D1551-16275 Pin 6 4A47
1C4244 Seal Kit 14A50
206DB Cylinder 1.06” Rod
1D203-1075 Rod 1 21A98
1D1003-3 Clevis 2 23A42
1D1153-3 Head 3 18A95
1D1401-200 Piston 4 11A25
1D1503-3 Base 5 22A56
1D1551-16275 Pin 6 4A47
1C4244 Seal Kit 14A50
208DB Cylinder 1.06” Rod
1D203-1475 Rod 1 30A09
1D1003-3 Clevis 2 23A42
1D1153-3 Head 3 18A95
1D1401-200 Piston 4 11A25
1D1503-3 Base 5 22A56
1D1551-16275 Pin 6 4A47
1C4433 Seal Kit 14A50
Part # Description List # Ref. No.
2508DB Cylinder 1.06” Rod
1D203-1475 Rod 1 30A09
1D1003-3 Clevis 2 23A42
1D1153-3 Head 3 18A95
1D1401-200 Piston 4 11A25
1D1503-3 Base 5 22A56
1D1551-16275 Pin 6 4A47
1C4244 Seal Kit 16A81
210DB Cylinder 1.06” Rod
1D203-1475 Rod 1 30A09
1D1003-3 Clevis 2 23A42
1D1153-3 Head 3 18A95
1D1401-200 Piston 4 11A25
1D1503-3 Base 5 22A56
1D1551-16275 Pin 6 4A47
1C4244 Seal Kit 14A50
212DB Cylinder 1.06” Rod
1D203-1675 Rod 1 30A
1D1003-3 Clevis 2 23A42
1D1153-3 Head 3 18A95
1D1401-200 Piston 4 11A25
1D1503-3 Base 5 22A56
1D1551-16275 Pin 6 4A47
1C4244 Seal Kit 14A50
PAGE 184 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Part # Description List # Ref. No.
214DB Cylinder 1.06” Rod
1D0203-1875 Rod 1 33A67
1D1003-3 Clevis 2 23A42
1D1153-3 Head 3 18A95
1D1401-200 Piston 4 11A25
1D1503-3 Base 5 22A56
1D1551-16275 Pin 6 4A47
1C4244 Seal Kit 14A50
216DB Cylinder 1.25” Rod
1D0203-2075 Rod 1 36A51
1D1003-3 Clevis 2 23A42
1D1153-3 Head 3 18A95
1D1401-200 Piston 4 11A25
1D1503-3 Base 5 22A56
1D1551-16275 Pin 6 4A47
1C4244 Seal Kit 14A50
2510DB Cylinder 1.25” Rod
1D0206-1475 Rod 1 35A84
1D1003-5 Clevis 2 23A42
1D1157-13 Head 3 33A00
1D1401-300 Piston 4 14A16
1D1507-4 Base 5 30A96
1D1551-16275 Pin 6 4A47
1C4433 Seal Kit 16A81
2512DB Cylinder 1.25” Rod
1D0203-1675 Rod 1 30A72
1D1003-5 Clevis 2 23A42
1D1157-13 Head 3 33A00
1D1401-300 Piston 4 14A16
1D1507-4 Base 5 30A96
1D1551-16275 Pin 6 4A47
1C4433 Seal Kit 16A81
Part # Description List # Ref. No.
308DB Cylinder 1.06” Rod
1D0206-1475 Rod 1 35.84
1D1003-5 Clevis 2 23A42
1D1157-13 Head 3 33A00
1D1401-300 Piston 4 14A16
1D1507-4 Base 5 30A96
1D1551-16275 Pin 6 4A47
1C4629 Seal Kit 18A83
308DE Cylinder 1.25” Rod
1D0219-1475 Rod 1 41A01
1D1003-5 Clevis 2 23A42
1D1157-13 Head 3 33A00
1D1401-300 Piston 4 14A16
1D1507-4 Base 5 30A96
1D1551-16300 Pin 6 3A98
1C4629 Seal Kit 18A83
310DB Cylinder 1.25” Rod
1D0222-1475 Rod 1 41A01
1D1003-5 Clevis 2 23A42
1D1157-13 Head 3 33A00
1D1401-300 Piston 4 14A16
1D1507-4 Base 5 30A96
1D1551-16275 Pin 6 4A47
1C4630 Seal Kit 18A83
312DB Cylinder 1.25” Rod
1D0206-1675 Rod 1 39A84
1D1003-5 Clevis 2 23A42
1D1157-13 Head 3 33A00
1D1401-300 Piston 4 14A16
1D1507-4 Base 5 30A96
1D1551-16300 Pin 6 3A98
1C4629 Seal Kit 18A83
Cylinder Replacement Parts
Call Toll Free 1-800-457-5348 PAGE 185AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Cylinder Replacement Parts
Part # Description List # Ref. No.
314DB Cylinder 1.06” Rod
1D0206-1875 Rod 1 43A65
1D1003-5 Clevis 2 23A42
1D1153-13 Head 3 33A00
1D1401-300 Piston 4 14A16
1D1507-4 Base 5 30A96
1D1551-16275 Pin 6 4A47
1C4629 Seal Kit 18A83
316DB Cylinder 1.25” Rod
1D0206-2525 Rod 1 55A43
1D1014-12 Clevis 2 21A83
1D1157-22 Head 3 29A68
1D1401-300 Piston 4 14A16
1D1507-4 Base 5 30A96
1D1551-20300 Pin 6 5A18
1C4629 Seal Kit 18A83
318DB Cylinder 1.25” Rod
1D0206-2275 Rod 1 51A86
1D1003-5 Clevis 2 23A42
1D1157-13 Head 3 33A00
1D1401-300 Piston 4 14A16
1D1507-4 Base 5 30A96
1D1551-16275 Pin 6 4A47
1C4629 Seal Kit 18A83
324DB Cylinder 1.25” Rod
1D0222-2862 Rod 1 75A13
1D1003-5 Clevis 2 23A42
1D1157-22 Head 3 29A68
1D1401-300 Piston 4 14A16
1D1507-4 Base 5 30A96
1D1551-16275 Pin 6 4A47
1C4630 Seal Kit 21A96
Part # Description List # Ref. No.
3508DB Cylinder 1.06” Rod
1D0205-1462 Rod 1 39A92
1D1003-5 Clevis 2 23A42
1D1159-4 Head 3 31A84
1D1401-350 Piston 4 20A59
1D1509-4 Base 5 36A00
1D1551-16275 Pin 6 4A47
1C4429 Seal Kit 19.56
3508DE Cylinder 1.25” Rod
1D0215-1462 Rod 1 38A72
1D1003-5 Clevis 2 23A42
1D1159-4 Head 3 31A84
1D1401-350 Piston 4 20A59
1D1509-4 Base 5 36A00
1D1551-16300 Pin 6 3A98
1C4429 Seal Kit 19A56
3510DB Cylinder 1.25” Rod
1D0205-1462 Rod 1 39A92
1D1003-5 Clevis 2 23A42
1D1159-4 Head 3 31A84
1D1401-350 Piston 4 20A59
1D1509-4 Base 5 32A04
1D1551-16300 Pin 6 3A98
1C4429 Seal Kit 19A56
3512DB Cylinder 1.25” Rod
1D0205-1662 Rod 1 39A92
1D1003-5 Clevis 2 23A42
1D1159-4 Head 3 31A84
1D1401-350 Piston 4 20A59
1D1509-4 Base 5 36A00
1D1551-16300 Pin 6 3A98
1C4429 Seal Kit 19A56
PAGE 186 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Cylinder Replacement Parts
Part # Description List # Ref. No.
3516DB Cylinder 1.50” Rod
1D0222-2512 Rod 1 72A34
1D1014-12 Clevis 2 21A83
1D1159-13 Head 3 33A20
1D1401-350 Piston 4 20A59
1D1509-13 Base 5 33A96
1D1551-20300 Pin 6 5A18
1C4631 Seal Kit 24A57
408DB Cylinder 1.25” Rod
1D0207-1488 Rod 1 40A66
1D1003-3 Clevis 2 23A42
1D1161-4 Head 3 38A97
1D1401-400 Piston 4 23A38
1D1511-4 Base 5 41A40
1D1551-16275 Pin 6 4A47
1C4430 Seal Kit 21A96
408DE Cylinder 1.25” Rod
1D0220-1488 Rod 1 44A77
1D1003-5 Clevis 2 23A42
1D1161-4 Head 3 38A97
1D1401-400 Piston 4 23A38
1D1511-4 Base 5 41A40
1D1551-16300 Pin 6 3A98
1C4430 Seal Kit 23A97
410DB Cylinder 1.25” Rod
1D0207-1525 Rod 1 41A77
1D1003-5 Clevis 2 23A42
1D1161-4 Head 3 38A97
1D1401-400 Piston 4 23A38
1D1511-4 Base 5 41A40
1D1551-16275 Pin 6 3A98
1C4430 Seal Kit 23A97
Part # Description List # Ref. No.
412DB Cylinder 1.25” Rod
1D0207-1725 Rod 1 40A65
1D1003-5 Clevis 2 23A42
1D1161-4 Head 3 38A97
1D1401-400 Piston 4 23A38
1D1511-4 Base 5 41A40
1D1551-16300 Pin 6 3A98
1C4430 Seal Kit 27A37
416DB Cylinder 2.00” Rod
1D0210-2538 Rod 1 120A41
1D1014-12 Clevis 2 21A83
1D1161-22 Head 3 40A15
1D1401-400 Piston 4 23A38
1D1511-13 Base 5 39A04
1D1551-20300 Pin 6 5A18
1C4638 Seal Kit 27A79
424DB Cylinder 1.50” Rod
1D0208-2925 Rod 1 81A08
1D1003-5 Clevis 2 23A42
1D1161-13 Head 3 45A14
1D1401-400 Piston 4 23A38
1D1511-4 Base 5 41A40
1D1551-16275 Pin 6 4A47
1C4637 Seal Kit 25A84
508DB Cylinder 1.50” Rod
1D0209-1412 Rod 1 46A82
1D1013-5 Clevis 2 19A77
1D1165-4 Head 3 42A33
1D1401-500 Piston 4 34A20
1D1515-4 Base 5 57A93
1D1551-16275 Pin 6 4A47
1C4654 Seal Kit 26A28
Breather Plugs: plug type, aluminum body contains 2 fi ne screens retained by star washerAgri Part #HCBP38 - Ref. No. 1A99 - 3/8” NPT Agri Part #HCBP50 - Ref. No. 1A99 - 1/5” NPT
Call Toll Free 1-800-457-5348 PAGE 187AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Directional Hydraulic Control ValvesCross Series 3-Position, 4 Way Valve in 1-,2-, or 3-post version with fl oat available
Features
• 2500 psi operating pressure
• 30 gpm fl ow rating
• 3/4” NPT (F) inlet and outlet ports
• 1/2” NPT (F) work ports
• Load holding cylinder port check valves
• Open center, spring centered
• Adjustable built in relief valve, set at 2000 psi
• Built in load checks for lifting
Part # Application Description Ref. No.
SBA2 A Single Spool 3-Position 4 Way Open Center 111A56
SBA2-CC A Single Spool 3-Position 4 Way Closed Center 111A56
SBA22 A Double Spool 3-Position 4 Way Open Center 174A75
SBA22-CC A Double Spool 3-Position 4 Way Closed Center 187A26
SBA222 A Triple Spool 3-Position 4 Way Open Center 218A05
SBA222-CC A Triple Spool 3-Position 4 Way Closed Center 218A05
SBAF2 B Double Spool, 1st Spool 4-Position Float, 2nc Spool 3-Position Open Center 175A22
SBAF2-CC B Double Spool, 1st Spool 4-Position Float, 2nc Spool 3-Position Closed Center 191A24
SBAF22 B Triple Spool, 1st Spool 4-Position Float, 2nc & 3rd Spool 3-Position Open Center 225A01
SBAF22-CC B Triple Spool, 1st Spool 4-Position Float, 2nc & 3rd Spool 3-Position Closed Center 225A01
Applications
• For operating double-acting cylinders or a reversible hydraulic motor
• Float position allows a loader or dozer blade to ride the contours of the ground as the machine moves forward
Part # Description Ref. No.
JS5 Joystick Kit 69A63
Replacement Parts Available For All Hydraulic ValvesAsk Your Customer Rep For Details
Enables operator to operate a double spool independently or simultaneously by moving a single lever. Lubricated ball end swivels for extra spool operation.
PAGE 188 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Hydraulic Valves, Selector Valves,Relief Valves, and Hydraulic Cylinder Stops
A - Economy Valve
The Cross SCA Series is a rugged and dependable low cost valve. It is a series type recommended for all general purpose applications except heavy lifting loads in a vertical position. It will operate a double acting cylinder or a bidirectional motor required to hold a load in neutral. Single spool, 3-position, 4-way, 30 GPM fl ow rate, 1500 psi fi xed relief, 3/4” in/out, 1/2” NPTF ports.
Part #EV1 Ref. No. 78A04
B - Selector Valve
The Cross SVS series valve is a 2-position, 3-port unit that can be used for unidirectional cylinder and motor control, or for selecting one or two circuits from a single pump. 2500 psi operating pressure, 20 GPM rated fl ow, 1/2” NPTF port size.
Part #SV2 Ref. No. 42A13
C - Relief Valve
The Cross SRD series differential poppet type adjustable relief valves provide long life and smooth performance at an economical Ref. No.. This valve is used to protect pumps from damage due to over pressurization. 30 GPM fl ow rating, 3/4” NPTF ports.
Part #SRDL 500-1500 psi range set at 1000 psi Ref. No. 39A84
Part #AGRI SRDH 1500-3000 psi range set at 2000 psi Ref. No. 42A07
F - Hydraulic Filters
The Cross series fi lters feature spin-on, throw-away type cartridges. 200 psi pressure rating
Part #HF1-10 3/4” port size 10 Micron Ref. No. 17A16
Part #HF2-10 1-1/4” port size 10 Micron Ref. No. 46A39
Part #HF2-25 1-1/4” port size 25 Micron Ref. No. 46A39
Part #HFRE1-10 Replacement element: 10 Micron element fi ts Agri Part #HF1-10 Ref. No. 6A46
Part #HFRE2-10 Replacement element: 25 Micron element fi ts Agri Part #HF2-10 Ref. No. 6A46
Part #HFRE2-25 Replacement element: 25 Micron element fi ts Agri Part #HF2-25 Ref. No. 15A94
E - Hydraulic Cylinder Stops (Cast Iron)
Part #HCS4Fits shaft size 1” through 1-3/4”. Contains fi ve segments: 1-1/4”,
1-1/2”, 1-3/4”, and two pieces 1”. Ref. No. 30A41
Part #HCS5 1” individual segment fi ts 1” through 1-3/4” shaft Ref. No. 6A58
Part #HCS6 1-1/4” individual segment fi ts 1” through 1-3/4” shaft Ref. No. 6A58
Part #HCS7 1-1/2”” individual segment fi ts 1” through 1-3/4” shaft Ref. No. 6A58
Part #HCS8 1-3/4” individual segment fi ts 1” through 1-3/4” shaft Ref. No. 6A58
D - Hydraulic Cylinder Stops (Cast Aluminum)
Part #HCS1Fits 1-1/8”, 1-1/4”, 1-3/8”, and 1-1/2” shafts.
Contains one segment of 3/4”, 1”, 1-1/4”, and 1-1/2”.Ref. No. 12A56
Part #HCS2Fits 1-3/4”, 1-7/8”, and 2” shafts.
Contains one segment of 1”, 1-1/2”, 2”, and 4”.Ref. No. 26A17
Call Toll Free 1-800-457-5348 PAGE 189AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Part # Description Ref. No.
2-0053 Cross Kit 11A45
N3-3-1601 Slip Yoke 32A66
N3-40-1571 Stub Shaft 40A70
N3-28-537 Weld Yoke 16A61
N3-2-479 Flange Yoke 18A60
Replacement Parts for N-148-36 Series 48 Drive Shaft 36”
Part # Description Ref. No.
2-0054 Cross Kit 14A78
N3-3-AA8KX Slip Yoke 36A75
N3-40-1531 Stub Shaft 68A20
N3-28-557 Weld Yoke 18A31
N3-2-159 Flange Yoke 18A60
Replacement Parts for N-141-36 Series 41 Drive Shaft 36”
Part # Description Ref. No.
N-141-36 SERIES 41 Drive Shaft 36” Length 122A10
N-148-36 SERIES 48 Drive Shaft 36” Length 159A99
Irrigation Drive Shafts36” Standard Length Drive Shaft
PAGE 190 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Ball Valves, Cam Couplers, and Component Parts for Fluid Handling
Part # Description Ref. No.
4012A-20 1/2” Full Port 22A98
4012B-20 3/4” Full Port 22A98
4012C-20 1” Standard Port 22A98
4012Y-20 1” Full Port 24A88
4012X-20 1-1/4” Full Port 31A86
4012D-20 1-1/2” Full Port 31A86
4012E-20 2” Standard Port 30A34
4012N-20 2” Full Port 45A90
4012W-20 2-1/2” Full Port 64A44
4012F-20 3” Standard Port 64A44
4012Z-20 3” Full Port 112A26
Bolted Polypropylene Ball Valve - Stainless Steel Bolts, Self Aligning Ball, Machined Surface
Part # Description Ref. No.
4012K-20 1/2” Full Port Nozzle 41A14
4012L-20 2” Standard Port Nozzle 41A14
4012P-30 2” Full Port Nozzle 59A90
Bolted Polypropylene Nozzles
Part # Description Ref. No.
SU-050FP 1/2” Polyglass 12A08
SU-075FP 3/4” Polyglass 12A60
SU-100FP 1” Polyglass 16A02
SU-125FP 1-1/4” Polyglass 27A03
SU-150FP 1-1/2” Polyglass 32A56
SU-200FP 2” Polyglass 41A74
Single Union Poly Ball Valves
Call Toll Free 1-800-457-5348 PAGE 191AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Ball Valves, Cam Couplers, and Component Parts for Fluid Handling
Part # Description Ref. No.
LSY-050-40 1/2” 14A65
LSY-075-40 3/4” 14A65
LSY-100-40 1” 16A91
LSY-125-40 1-1/4” 16A91
LSY-150-40 1-1/2” 29A90
LSY-200-40 2” 32A92
Y-Strianer - Standard 40 Mesh
Part # Description Ref. No.
050-A 1/2” 2A94
075-A 3/4” 3A02
100-A 1” 3A06
125-A 1-1/4” 3A24
150-A 1-1/2” 3A74
200-A 2” 4A32
300-A 3” 10A72
Male Adapter - Female Threaded
Female Adapter - Female Threaded
Part # Description Ref. No.
050-B 1/2” 7A12
075-B 3/4” 7A12
100-B 1” 8A28
125-B 1-1/4” 8A34
150-B 1-1/2” 9A78
200-B 2” 12A16
300-B 3” 20A80
Part # Description Ref. No.
050-C 1/2” 7A12
075-C 3/4” 7A12
100-C 1” 8A28
125-C 1-1/4” 8A34
150-C 1-1/2” 9A78
200-C 2” 12A16
300-C 3” 20A80
Female Hose Shank Couplers
PAGE 192 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Ball Valves, Cam Couplers, and Component Parts for Fluid Handling
Part # Description Ref. No.
050-D 1/2” 4A40
075-D 3/4” 4A52
100-D 1” 5A07
125-D 1-1/4” 5A70
150-D 1-1/2” 5A81
200-D 2” 9A25
300-D 3” 14A65
Female Coupler - Female Threaded
Part # Description Ref. No.
050-E 1/2” 2A79
075-E 3/4” 2A89
100-E 1” 3A10
125-E 1-1/4” 3A20
150-E 1-1/2” 3A40
200-E 2” 4A15
300-E 3” 10A90
Male Adapter - Hose Shank
Part # Description Ref. No.
050-F 1/2” 2A79
075-F 3/4” 2A89
100-F 1” 3A10
125-F 1-1/4” 3A20
150-F 1-1/2” 3A40
200-F 2” 4A15
300-F 3” 10A90
Male Coupler - Male Threaded
Part # Description Ref. No.
050-DC 1/2” 5A50
075-DC 3/4” 5A79
100-DC 1” 6A45
125-DC 1-1/4” 6A95
150-DC 1-1/2” 7A65
200-DC 2” 8A25
300-DC 3” 14A55
Male Adapter - Dust Cap
Call Toll Free 1-800-457-5348 PAGE 193AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Ball Valves, Cam Couplers, and Component Parts for Fluid Handling
Part # Description Ref. No.
050-DP 1/2” 3A02
075-DP 3/4” 3A06
100-DP 1” 3A26
125-DP 1-1/4” 3A34
150-DP 1-1/2” 3A52
200-DP 2” 4A88
300-DP 3” 10A76
Male Coupler - Plugs
Part # Description Ref. No.
200A-90 2” Adaptor - Female Thread 5A50
200B-90 2” Coupler - Male Thread 10A55
200C-90 2” Coupler - Hose Shank 11A85
200D-90 2” Coupler - Female Thread 12A05
200E-90 2” Adaptor - Hose Shank 6A35
200F-90 2” Adaptor - Male Thread 6A35
90 ° Cam Couplers & Adapter
Part # Description Ref. No.
050-HN 1/2” 1A08
075-HN 3/4” 1A19
100-HN 1” 1A42
125-HN 1-1/4” 1A59
150-HN 1-1/2” 1A95
200-HN 2” 2A38
300-HN 3” 8A17
400-HN 4” 9A45
Poly Hose Nipples
Part # Description Ref. No.
40000 3/4” x 1/2” 1A65
40100 1” x 3/4” 1A68
40200 1-1/4” x 1” 1A73
40300 1-1/4” x 1-1/2” 1A85
40400 2” x 1-1/2” 2A42
40500 3” x 2” 4A49
40700 4” x 3” 4A99
Poly Reducer Bushings
PAGE 194 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Tractor Linkage Partsand Farm Accessories
Part # Cat.Pin Hole
SizeThreads
Body
Length
Closed
Length
Open
Length
Repair End Part #Ref. No.
Left Right
TL165 1 3/4” 1 1/8” NC 16” 21” 31” RE1619 RE1620 13A25
TL166 1 3/4” 1 1/8” NC 20” 25” 35” RE1619 RE1620 12A25
TL1670 1 & 2 3/4” 1 1/8” NC 16” 21” 32”RE1619 orRE1641
RE1620 orRE1640
13A90
TL174 2 3/4” & 1” 1 1/8” NC 16” 21” 31” RE1641 RE1640 22A25
TL176 2 1” 1 1/8” NC 20” 25” 37” RE1641 RE1649 14A85
TL187 3 1” 1 38” NC 19 1/2” 25 1/2” 37” RE1827 RE1826 35A50
Quality forged top links available in Category 1 & 2, 2, and 3 sizes. All top links are yellow zinc dichromate plated unless otherwise specifi ed.
Forged Top Link
Top Link Repair Ends
Part # Cat. TypePin Hole
Size
Thread
Diameter
Thread
Length
Overall
Length
Fits SpeeCo
Top LinkRef. No.
RE1619 1 Forged 3/4”1 1/8” NC
(LH)6” 10”
TL165, TL166, TL167, TL1630, TL1670
4A98
RE1620 1 Forged 3/4”1 1/8” NC
(RH)6” 10”
TL165, TL166, TL167, TL1630, TL1670
10A79
RE1717 2 Forged 1”1 1/4” NC
(LH)5 1/2” 10”
TL173, TL175, TL1730, TL1735, TL1740
15A17
RE1718 2 Forged 1”1 1/4” NC
(RH)5 1/2” 10”
TL173, TL175, TL1730, TL1735, TL1740
17A70
Forged and welded screw-in repair ends for Category 1, 2, and 3 SpeeCo and other top links.
Call Toll Free 1-800-457-5348 PAGE 195AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Tractor Linkage Partsand Farm Accessories
Part # Cat.No. of
Holes
Lift Arm
Spacing
Hole
Diameter
Pin
DiameterThickness Width Ref. No.
DB411 1 11 26” 3/4” 7/8” 1” 2 1/2” 20A72
DB421 2 11 26” 3/4” 1 1//8” 1 1/4” 3” 35A72
DB422 2 13 32” 3/4” 1 1//8” 1 1/4” 3” 27A65
DB431 3 5 38” 1 1/4” 1 7/16” 1 3/4” 3 1/2” 83A10
One piece 3-point hitch cross drawbars to fi t Category 1 through 3 tractors.
Drawbars
Lift Arms & Lift Arm Parts
Category 1 lift arms and Category 1 & 2 lift arm repair ends. See also the Forged and Weld-On Ball Ends on page XX.
Part # Description Ref. No.
LA335Category 1 right or left hand forged lift arm. Fits all Ferguson models. Ford 2N, 8N, and NAA.Massey-Ferguson 35 and 50. Oliver 3-point conversion. John Deere 1010. 7/8” pin holes; 31 3/4” ball centers; 34 1/2” overall length.
24A95
LA3320 Category 1 forged right hand lift arm repair end. 7/8” pin hole. 5 3/4” overall length. 9A39
LA3321 Category 1 forged left hand lift arm repair end. 7/8” pin hole. 5 1/2” overall length. 9A39
LA3324 Category 1 forged bent lift arm repair end. 7/8” pin hole. 5 1/2” overall length. 15A42
LA3325 Category 2 forged right or left straight lift arm repair end. 1 1/8” pin hole. 5” overall length. 13A43
SL152Category 1 lift arm leveling assembly. 18 1/2” closed. 25” open length. 7/8” NF thread diameter. Replaces Ford NCA577A. Left hand repair end #RE158. Right hand repair end #RE159.
25A22
Designed to increase the stability of the tractor lift arms. Stabilizer kits reduce side sway of the three-point hitch when adjusted. For Category 1 implements and a variety of tractors.
Stabilizer Kits
Part # Description Ref. No.
SK611For Category 1 implements with 7/8” draw pins. Replaces Ferguson 677022. Fits all Ferguson models Ford 2N, 8N, 9N, NAA, 600, and 800. Massey-Ferguson 35 and 60. Kit contains two (2) SA621 arms, two (2) SB631 brackets, two (2) P781, and two (2) P791 lynch pins.
32A48
SK612For Category 1 implements with 7/8” draw pins. Replaces Ferguson 677289 and 677290. Fits Massey-Ferguson models 35, 50, 135, 150, 1962 and later models with low clearance. Kit contains two (2) SB631 brackets, two (2) P781, and two (2) P791 lynch pins. Painted blue.
31A26
PAGE 196 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Tractor Linkage Partsand Farm Accessories
Stabilizer Arms & Brackets
Part # Description Ref. No.
SA621Right or left universal stabilizer arm. 7/8” pin holes on 31-9/16” centers.
SpeeCo SK611 stabilizer kit.11A75
SA622Right or left universal stabilizer arm. Replaces Massey-Ferguson ST96362358. 7/8” pin holes on
33-1/8” centers.8A37
SA6260
Heavy duty adjustable forged stabilizer arm. Fits all Ferguson models. Ford 2N, 8N, 9N, NAA,
and 600. Massey-Ferguson 35, 50, 175, 65, 135, 150, and 180. Adjustable from 28-1/2” to 36”.
7/8” pin holes. 7/8” NF threads. Available in yellow zinc dichromate plating.
22A91
SA6251Left stabilizer arm. Fits Ford 2000 and 3000. 7/8” pin holes on 31/5/8” centers. Fits SpeeCo
SK61110 stabilizer kit.12A83
SA6252Right stabilizer arm. Fits Ford 2000 and 3000. 7/8” pin holes on 31/5/8” centers. Fits SpeeCo
SK61110 stabilizer kit.12A83
SB631Right or left universal stabilizer bracket. Fits SpeeCo SK611, SK612, and SK6110. Ferguson and Ford stabilizer kits. Accommodates P781 stabilizer stub pin.
6A25
Replacement stabilizer arms for SpeeCo stabilizer kits and a variety of tractors.
Stabilizer arms increase the stability of the tractor lift arms. Stay straps for Category 1 tractors are used to maintain an implement at a set height.
Call Toll Free 1-800-457-5348 PAGE 197AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Tractor Linkage Partsand Farm Accessories
Part # Cat. Pin Hole Size Length Through Bore Sleeve Width Sleeve O.D. Ref. No.
B213 1” 3/4” 1-5/8” 3/4” 2” 2A25
B214 2” 1” 1-3/4” 7/8” 2-3//8” 2A25
Weld-on top link ball sockets for Category 1 & 2 sizes. Available in standard duty yellow zinc dichromated plated versions.
Top Link Ball Sockets
Part # Sleeve O.D. Cat. Pin Hole Size Length Through Bore Sleeve Width Ref. No.
B223 7/8” 1” 7/8” 1-3/8” 7/8” 2A65
B224 15/16” 2” 1-1/8” 1-5/16” 15/16” 6A78
B2232 1-11/32” 3” 1-7/16 1-3/4” 1-11/32” $4.10
Lift Arm Ball Sockets
Part # Cat. Description Ref. No.
RE1642 1 Top Link End 6A92
RE1643 2 Top Link End 9A53
LA3322 1 Lift Arm End Straight 9A43
LA3325 2 Lift Arm End Straight 13A43
LA3320 1 Right Hand Lift Arm Repair End 9A39
LA3321 1 Left Hand Lift Arm Repair End 9A39
LA3323 1 Lift Arm End - Bent 12A57
LA3324 2 Lift Arm End - Bent 15A42
Lift Arm Ball Sockets
Weld-on lift arm ball sockets to fi t Category 1 through 3 tractors. Available in standard duty yellow zinc dichromate plated versions.
High-Quality weld-on top link and lift arm ball sockets in Category 1 & 2 sizes. Lift arm ends are available in straight and bent styles.
PAGE 198 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Tractor Linkage Partsand Farm Accessories
Part # Cat. Description Pin Hole Size Length Thru Bore Ball Dia. Ref. No.
B242 2John Deere & Oliver top link ball.
Replaces John Deere F2681, Oliver 104585A.1” 1-3/4” 2” 2A15
B243 1Ford lift arm ball. Replaces Ford DDN995233.
Fits Ford 3000, 4000, & 5000.7/8” 1-3/8” 2-1/4” 2A25
B244 2Ford lift arm ball. Replaces Ford C5NN557A.
Fits Ford 3000, 4000, & 5000.1-1/8” 1-3/4” 2-1/4” 3A65
Top link and lift arm balls for Ford, John Deere, Oliver, and other tractors. Designed to replace original balls. Available in yellow zinc dichromate plating.
Replacement Balls
Top Link Reducer Bushings
Lift Arm Reducer Bushings
Used in the pin hole of a top link to allow a smaller category pin to fi t. Available in yellow zinc dichromate plating.
Part # Cat. Description Outside Dia. Inside Dia. Length Ref. No.
B829 0-1 Fits all Category 0 top link pins. 3/4” 5/8” 1-5/8” 0A46
B831 1-2 Fits all Category 1 top link pins. Replaces Ford C7NN6993A. 1” 3/4” 1-15/16” 0A76
B8220 1-2 Fits all Category 1 top link pins; short. 1” 3/4” 1-5/8” 1A07
B833 2-3 Fits all category 2 top link pins. 1-1/4” 1” 1-15/16” 0A96
Used in the pin hole of a lift arm to allow a smaller category of pin to fi t. Available in yellow zinc dichromate plating.
Part # Cat. Description Outside Dia. Inside Dia. Length Ref. No.
B828 0-1 Fits all Category 0 lift arms. 7/8” 5/8” 1-3/8” 0A99
B821 1-2 Fits all Category 1 lift arm pins. Replaces Ford C7NN6992A. 1-1/8” 7/8” 1-3/4” 0A89
B8221 1-2 Fits all Category 1 lift arm pins. Replaces John Deere F2684. 1-1/8” 7/8” 1-3/8” 0A89
B832 2-3 Fits all Category 2 lift arm pins. 1-7/16” 1-1/8” 1-3/4” 1A05
B8320 2-3 Fits all Category 2 lift arm pins; extra long. 1-7/16” 1-1/8” 3-1/4” 2A04
B8312 2-3 Fits all Category 2 lift arm pins. 15/32” lynch pin hole. 1-7/16” 1-1/8” 2-1/2” 1A84
Call Toll Free 1-800-457-5348 PAGE 199AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Part # DescriptionPin
Diameter
Usable
LengthOverall Length
Thread
DiameterRef. No.
P781Replaces Ford 230044.
Massey-Furguson 18177M17/8” 3/8” 2-5/8” 5/8” NF 1A40
P785Replaces Ford 141185.
Massey-Furguson MF668154M17/8” 1-1/4” 3-1/8” 5/8” NF 1A92
Stabilizer stub pins for SpeeCo, Ford, Ferguson, and other stabilizer kits. Available in yellow zinc dichromate plating.
Stabilizer Pins
Part # Cat. Description Pin Dia.Usable
Length
Overall
Length
Thread
Diameter
Thread
LengthRef. No.
P7221 0-1To work Category 0 implements on
Category 1 tractor. Adjustable.7/8” 1-3/4” 4-1/2” 5/8” NF 2” 2A80
P722 1 Adjustable. Universal. 7/8” Adjustable 5” 7/8” NF 2-5/8” 2A05
P728 1 Forged. Universal. 7/8” 1-3/4” 5-1/2” 7/8” NF 1-5/8” 1A75
P7219 1 Adjustable. Universal. Extra long. 7/8” Adjustable 6-1/4” 7/8” NF 3-1/2” 2A58
P7245 1 Forged. Extra long. 7/8” 2-1/4” 6-1/2” 7/8” NF 2-1/4” 2A79
P724 1-2To work Category 1 implements on
Category 2 tractor. Adjustable. 1-1/8” Adjustable 5-1/4” 7/8” NF 2-7/16” 2A15
P7240 1-2To work Category 1 implements on
Category 2 tractor. Forged.1-1/8” 1-13/16” 5-1/14” 7/8” NF 1-5/8” 3A50
P7249 1 & 2 Forged. Universal.7/8” & 1-1/8”
2-1/16” 8” 1” NF 1-1/4” 5A92
P721 2 Adjustable. Universal. 1-1/8” Adjustable 6-1/8” 1-1/8” NF 3-3/8” 4A72
P7212 2 Forged. Universal. 1-1/8” 1-3/4” 6-1/8” 1-1/8” NF 2-3/8” 4A15
P7243 2-3To work Category 2 implements on
Category 3 tractor. Forged.1-7/16” 1-7/8” 5-3/4” 1-1/8” NF 1-1/2” 9A08
P7229 2 Forged. Universal. 1-7/16” 2” 5-7/8” 1-3/8” NF 1-1/2” 8A92
Forged and adjustable Category 0 through 3 draw pins for a variety of applications. All pins are yellow zinc dichromate plated.
Draw Pins (Lift Arm Pins)
Tractor Linkage Partsand Farm Accessories
PAGE 200 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Clevis Type Draw Pins
Part # Cat. Description Pin Dia. Usable Length Overall Length Ref. No.
P776 0 Top Link Pin 5/8” 3” 4-7/16” 1A06
P771 1Replaces Ford 9N-560,Ferguson 195647M1
3/4” 2-3/4” 4-1/2” 1A15
P772 1Long top link pin; replaces
Ferguson195589M1, AC3399423/4” 3-7/8” 5-1/2” 1A15
P7715 1Extra long top link pin;replaces Ford E381T9
3/4” 4-3/4” 6-3/8” 1A61
P7716 2Replaces Ford C5NN560A,
MF185873M91, AC2090149/2398881” 3-9/16” 5-1/4” 1A40
P774 2 Replaces Ford C5NN486A 1” 4-3/8” 6” 2A94
P7711 3 Top link pin 1-1/4” 4-5/8” 6-1/2” 4A67
Top Link Pins
Sizes and styles for Category 0 through 3 tractors. Available in yellow zinc dichromate plated.
For use with implements with yoke type mountings. All pins are yellow zinc dichromate plated.
Part # Cat. Type Pin Diameter Usable Length Overall Length Ref. No.
P7234 1 Roll Pin 7/8” 4-1/2” 6” 2A89
P7236 2 Roll Pin 1-1/8” 4-3/4” 6-1/2” 4A16
P7237 2 Roll Pin 1-1/8” 5-3/8” 7” 4A29
P7238 2 Roll Pin 1-1/8” 7-3/8” 9” 5A36
P7250 2 & 3 Head 1-1/8” & 1-7/16” 3-5/8 & 4-1/4” 9-1/4” 12A50
Tractor Linkage Partsand Farm Accessories
Call Toll Free 1-800-457-5348 PAGE 201AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Forged head hitch pin with swivel handle and clip pin. More than 25% stronger than Grade 2. Available in yellow zinc dichromate.
Swivel Handle Forged Hitch Pins
Part # Pin Diameter Usable Length Overall Length Clip Pin Part # Ref. No.
P71010C 3/8” 4-1/4” 4-3/4” P7923 1A95
P71011C 1/2” 4-1/4” 5-3/4” P7924 2A44
P71012C 1/2” 6-1/4” 7-3/4” P7924 2A90
P71021C 5/8” 4-1/4” 5-3/4” P7924 2A95
P71022C 5/8” 6-1/4” 7-3/4” P7924 3A04
P71031C 3/4” 4-1/4” 5-3/4” P7924 2A42
P71032C 3/4” 6-1/4” 7-3/4” P7924 2A63
P71041C 7/8” 4-1/4” 5-3/4” P7925 2A69
P71042C 7/8” 6-1/4” 7-3/4” P7925 3A34
P71051C 1” 4-1/4” 5-3/4” P7927 3A25
P71052C 1” 6-1/4” 7-3/4” P7927 4A36
P71062C 1-1/8” 6-1/4” 7-3/4” P7928 6A57
P71072C 1-1/4” 6-1/4” 7-3/4” P7928 8A49
Forged head hitch pin with swivel handle and clip pin. More than 25% stronger than Grade 2.
Grade 5 Forged Red Head Hitch Pins
Part # Pin Diameter Usable Length Overall Length Clip Pin Part # Ref. No.
P700511 1/2” 3-5/8” 6-5/8” P7923 2A65
P700521 5/8” 4” 7” P7924 3A19
P700522 5/8” 5-3/4” 9” P7924 3A48
P700531 3/4” 4” 7” P7925 3A94
P700532 3/4” 6-1/2” 9-1/2” P7925 3A99
P700541 7/8” 4-1/4” 7-1/4” P7925 4A35
P700542 7/8” 6-1/2” 9-1/2” P7925 4A53
P700551 1” 4-3/4” 7-3/4” P7927 5A07
P700552 1” 7-1/2” 10” P7927 6A16
P700562 1-1/8” 8-1/2” 11-1/2” P7927 8A52
P700572 1-1/4” 8-1/2” 11-1/2” P7928 9A46
P700582 1-1/2” 8-1/2” 11-1/2” P7928 15A82
Tractor Linkage Partsand Farm Accessories
PAGE 202 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Patented locked mechanism on top of pin operates with one hand and keeps pin securely in drawbar. Large handle provides more leverage for easy removal. Heavy duty hinged handle and lock helps prevent damage and injury from disengaged pins. Large collar prevents pin damage.
Lockease Safety Hitch Pin
Part # Shaft Diameter Usable Length Ref. No.
LH80140 5/8” 4-1/2” 15A35
LH80150 3/4” 4-1/2” 16A15
LH80160 3/4” 6” 17A85
LH80165 7/8” 4-1/2” 18A31
LH80170 7/8” 6” 18A97
LH80180 1” 6” 21A85
LH80190 1-1/8” 7” 24A45
LH80200 1-1/4” 7” 26A69
Many farm, lawn and garden and industrial applications. Complete with “R” Clip pin. Available in yellow zinc dichromate plating
Bent Hitch Pins
Part # Diameter Usable Length Clip Pin Part # Ref. No.
P71120 1/2” 2-1/2” P7924 0A63
P71111 1/2” 3” P7924 1A10
P71126 5/8” 4” P7924 1A56
P71113 3/4” 3-1/2” P7924 1A21
P71130 3/4” 5” P7924 1A79
Hitch Pin Clips
Part # Wire Diameter Overall Length Fits Pin Diameter Ref. No.
P7922 1/16” 1-9/16” 3/8” to 1/2” 0A07
P7923 3/32” 1-5/8” 1/4” to 1/2” 0A08
P7924 1/8” 1-5/16” 1/2” to 3/4” 0A10
P7925 5/32” 2-15/16” 5/8” to 1” 0A15
P7927 3/16” 3-3/4” 7/8” to 1-1/4” 0A29
P7928 1/4” 4” 3/4” tp 1” 0A59
P7929 5/16” 5-15/16” 1” to 1-7/16” 0A62
P7929S 5/16” 4-1/8” 1” to 1-7/16” 0A55
P793 5/16” 3-1/2” Fits 5/16” Hole 0A79
Available in the most popular sizes for farm and other applications. Available in yellow zinc dichromate plating.
Tractor Linkage Partsand Farm Accessories
Call Toll Free 1-800-457-5348 PAGE 203AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Tractor Linkage Partsand Farm Accessories
Implement Jacks and Parts
Part # Description Ref. No.
SL1541Heavy duty ratchet jack with 1 1/4” ACME threads and grease ; Adjustablefrom 20” closed to 28” open; 1” clevis pins, clip pins and handle included.
38A90
SL153Turnbuckle implement jack with 1 1/4” NC threads;
Adjustable from 20” to 28” open; 1” pin holes41A72
Replace hydraulic cylinders or old screw jacks in those applications where frequent adjustment is needed.
Part # Description Pin Dia. Usable Length Shank Length Overall Length Ref. No.
P7919 Standard 3/16” 1” 1-3/8” 1-5/8” 0A30
P7920 P7919 with Chain and Cotter Pin 3/16” 1” 1-3/8” 1-5/8” 0A65
P791 Standard 7/16” 1-1/4” 1-3/4” 2” 0A16
P792 P791 with Chain and Cotter Pin 7/16” 1-1/4” 1-3/4” 2” 0A76
P794 Standard 1/4” 1-1/4” 1-3/4” 2-1/8” 0A32
P795 Short Shank 7/16” 1-1/4” 1-3/8” 1-3/4” 0A43
P796 P795 with Chain and Cotter Pin 7/16” 1-1/4” 1-3/8” 1-3/4” 0A87
P7913 Heavy Duty; Fits Cat. 1, 2 and 3 Pins 7/16” 1-1/2” 1-3/4” 2-1/8” 0A53
P7914 P7913 with Chain and Cotter Pin 7/16” 1-1/2” 1-3/4” 2-1/8” 0A89
P7915 Standard 5/16” 1-1/4” 1-3/4” 2-1/8” 0A28
P7916 Standard 3/8” 1-1/4” 1-3/4” 2-1/8” 0A59
P798 Long; Fits Cat. 1, 2 and 3 Pins 7/16” 1-3/4” 2” 2-5/16” 0A33
P798E Long Shank 7/16” 1-3/4” 2” 2-5/16” 0A26
Lynch Pins
Forged fasteners for numerous farm and other applications. Yellow zinc dichromate plated except for the P7913 and P7914 which have a black powder coated fi nish.
Part # Description Pin Diameter Usable Length Shank Length Overall Length Ref. No.
P7939 Square 5/16” 2-1/4” 2-3/4” 3” 0A63
P7940 Round 5/16” 2-1/4” 2-3/4” 3” 0A63
Wirelock Pins
This one piece fastener eliminates cotter pin loss and fi ts most quick release applications. Round or square handle available in most sizes. C1010 material used with zinc plating fi nish.
PAGE 204 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Tractor Linkage Partsand Farm Accessories
Part # Body Diameter Clevis Opening Usable Length Pin Diameter Working Load Limit (lbs.) Ref. No.
CL490203 5/8” 7/8” 3” 1/2” 6,000 5A39
CL490204 3/4” 1-5/16” 3-1/2” 5/8” 12,000 5A69
CL490205 7/8” 1-5/16” 3” 3/4” 16,000 6A83
CL490206 7/8” 1-5/16” 3-7/8” 3/4” 16,000 7A37
CL490207 15/16” 1-7/16” 4-1/4” 7/8” 20,000 9A04
CL490208 1” 2-1/8” 5” 1” 25,000 10A95
General Purpose Clevis:
CL490312 3/4” 2-1/2” 6-3/16” 3/4” 10,000 9A57
Totally forged which provides better grain structure without built-in stress and more consistency in strength, quality and conformity. Available in a black powder coated fi nish. Clevis pins are yellow dichromate plated.
Twisted & General Purpose Clevises
Part # Body Diameter Clevis Opening Usable Length Pin Diameter Working Load Limit (lbs.) Ref. No.
CL490401 1/4” 15/32” 1-1/8” 5/16” 1,000 2A43
CL490402 5/16” 17/32” 1-1/4” 3/8” 2,000 2A65
CL490403 3/8” 23/32” 1-7/16” 7/16” 3,000 2A84
CL490404 7/16” 3/4” 1-11/16” 1/2” 4,000 2A90
CL490405 1/2” 13/16” 1-15/16” 5/8” 6,500 3A01
CL490406 5/8” 1-1/16” 2-1/2” 3/4” 9,000 6A43
CL490407 3/4” 1-1/4” 3” 7/8” 13,000 9A20
CL490408 7/8” 1-7/16” 3-1/4” 1” 15,000 10A25
CL490409 1” 1-11/16” 3-3/4” 1-1/8” 17,000 17A96
CL490410 1-1/8” 1-13/16” 4-1/4” 1-1/4” 24,000 23A55
CL490411 1-1/4” 2” 4-1/2” 1-3/8” 28,000 33A67
Farm Clevises
Screw pin shackle type used for multiple hitches and crawler tractors.
Call Toll Free 1-800-457-5348 PAGE 205AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Tractor Linkage Partsand Farm Accessories
Part # Body Diameter Clevis Opening Usable Length Pin Diameter Working Load Limit (lbs.) Ref. No.
CL490103 5/8” 7/8” 3-1/4” 1/2” 6,000 5A08
CL490104 3/4” 1-5/16” 3-3/4” 5/8” 12,000 6A46
CL490105 7/8” 1-5/16” 3-1/4” 3/4” 16,000 6A67
CL490106 7/8” 1-5/16” 4-1/4” 3/4” 16,000 10A37
CL490107 15/16” 1-7/16” 4-5/8” 7/8” 20,000 8A68
CL490108 1” 2-1/8” 5-5/16” 1” 25,000 20A77
Straight Clevises
Totally forged which provides better grain structure without built-in stress and more consistency in strength, quality and conformity.
Part # Body Diameter Clevis Opening Usable Length Pin Diameter Working Load Limit (lbs.) Ref. No.
CL490301 1/4” 15/32” 7/8” 5/16” 1,000 1A28
CL490302 5/16” 17/32” 1” 3/8” 1,500 1A37
CL490303 3/8” 21/32” 1-1/4” 7/16” 2,000 1A52
CL490304 7/16” 23/32” 1-1/2” 1/2” 3,000 1A80
CL490305 1/2” 13/16” 1-11/16” 5/8” 6,000 2A79
CL490306 5/8” 1-1/16” 2” 3/4” 9,000 3A60
Utility Clevises
Totally forged which provides better grain structure without built-in stress and more consistency in strength, quality and conformity. Available in a black powder coated fi nish. Clevis pins are yellow dichromate plated.
Mid Links
Part # Chain Size Working Load Limit (lbs.) Ref. No.
CL490501 1/4” or 5/16” 4,700 3A57
CL490502 3/8” 6,600 4A15
CL490503 7/16” or 1/2” 11,300 6A95
CL409504 5/8” 18,000 7A10
Tractor Drawbar Grab HookTotally forged which provides better grain structure without built-in stress and more consistency in strength, quality and conformity. Available in a black powder coated fi nish. Clevis pins are yellow dichromate plated.
Part # Description Working Load Limit (lbs.) Ref. No.
CL490516 For all tractor drawbars up to 1 5/8” thick; for use with 5/16” to 1/2” chain
9,000 7A43
PAGE 206 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Gates® Conventional V-BeltsHi-Power® II Belts
V-BeltNo.
Outside LengthInches
Ref.No.
A20 22.0 3A40
A21 23.0 3A40
A22 24.0 3A40
A23 25.0 3A75
A24 26.0 3A85
A25 27.0 3A92
A26 28.0 3A98
A27 29.0 4A03
A28 30.0 4A09
A29 31.0 4A15
A30 32.0 4A21
A31 33.0 4A28
A32 34.0 4A37
A33 35.0 4A43
A34 36.0 4A52
A35 37.0 4A58
A36 38.0 4A67
A37 39.0 4A80
A38 40.0 4A87
A39 41.0 5A00
A40 42.0 5A06
A41 43.0 5A14
A42 44.0 5A25
A43 45.0 5A35
A44 46.0 5A41
A45 47.0 5A47
A46 48.0 5A51
A47 49.0 5A55
A48 50.0 5A62
A49 51.0 5A69
A50 52.0 5A73
A51 53.0 5A80
A52 54.0 5A87
A53 55.0 5A93
A54 56.0 6A03
A55 57.0 6A08
A56 58.0 6A14
A57 59.0 6A29
V-Belt No.
Outside LengthInches
Ref.No.
A58 60.0 6A29
A59 61.0 6A36
A60 62.0 6A42
A61 63.0 6A50
A62 64.0 6A57
A63 65.0 6A65
A64 66.0 6A73
A65 67.0 6A79
A66 68.0 6A87
A67 69.0 6A95
A68 70.0 7A01
A69 71.0 7A19
A70 72.0 7A33
A71 73.0 7A39
A72 74.0 7A43
A73 75.0 7A48
A74 76.0 7A53
A75 77.0 7A64
A76 78.0 7A76
A77 79.0 7A87
A78 80.0 8A15
A79 81.0 8A20
A80 82.0 8A25
A81 83.0 8A36
A82 84.0 8A49
A83 85.0 8A59
A84 86.0 8A75
A85 87.0 8A86
A86 88.0 9A14
A87 89.0 9A32
A88 90.0 9A38
A89 91.0 9A46
A90 92.0 9A51
A91 93.0 9A57
A92 94.0 9A68
A93 95.0 9A76
A94 96.0 9A88
A95 97.0 9A98
V-BeltNo.
Outside LengthInches
Ref.No.
A96 98.0 10A07
A97 99.0 10A15
A98 100.0 10A29
A99 101.0 10A40
A100 102.0 10A51
A101 103.0 10A61
A102 104.0 10A70
A103 105.0 10A82
A104 106.0 10A89
A105 107.0 10A99
A106 108.0 11A27
A107 109.0 11A40
A108 110.0 11A73
A110 112.0 11A90
A112 114.0 12A20
A113 115.0 12A30
A114 116.0 14A41
A115 117.0 12A56
A116 118.0 12A69
A117 119.0 12A79
A118 120.0 12A92
A120 122.0 13A13
A124 126.0 13A60
A125 127.0 13A75
A128 130.0 14A04
A130 132.0 14A13
A132 134.0 14A22
A133 135.0 14A62
A134 136.0 14A71
A136 138.0 14A97
A140 142.0 15A40
A144 146.0 15A84
A158 160.0 17A41
A173 175.0 18A15
A180 182.0 19A85
A Series Belts
Call Toll Free 1-800-457-5348 PAGE 207AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Gates® Conventional V-BeltsHi-Power® II Belts
V-BeltNo.
OutsideLengthInches
Ref. No.
B24 27.0 4A80
B25 28.0 4A80
B26 29.0 4A80
B27 30.0 4A80
B28 31.0 5A32
B29 32.0 5A44
B30 33.0 5A55
B31 34.0 5A67
B32 35.0 5A77
B33 36.0 5A88
B34 37.0 5A97
B35 38.0 6A11
B36 39.0 6A29
B37 40.0 6A50
B38 41.0 6A64
B39 42.0 6A87
B40 43.0 7A01
B41 44.0 7A18
B42 45.0 7A33
B43 46.0 7A48
B44 47.0 7A60
B45 48.0 7A78
B46 49.0 7A93
B47 50.0 8A03
B48 51.0 8A15
B49 52.0 8A31
B50 53.0 8A42
B51 54.0 8A55
B52 55.0 8A63
B53 56.0 8A71
B54 57.0 8A79
B55 58.0 8A86
B56 59.0 8A91
B57 60.0 8A97
B58 61.0 9A03
B59 62.0 9A10
B60 63.0 9A16
V-BeltNo.
OutsideLengthInches
Ref. No.
B61 64.0 9A29
B62 65.0 9A40
B63 66.0 9A69
B64 67.0 9A65
B65 68.0 9A76
B66 69.0 9A89
B67 70.0 9A98
B68 71.0 10A07
B69 72.0 10A18
B70 73.0 10A35
B71 74.0 10A67
B72 75.0 10A70
B73 76.0 10A72
B74 77.0 10A80
B75 78.0 11A19
B76 79.0 11A43
B77 80.0 11A54
B78 81.0 11A61
B79 82.0 11A59
B80 83.0 11A74
B81 84.0 11A80
B82 85.0 12A43
B83 86.0 12A49
B84 87.0 12A51
B85 88.0 12A55
B86 89.0 12A64
B87 90.0 12A97
B88 91.0 12A99
B89 92.0 13A01
B90 93.0 13A13
B91 94.0 13A30
B92 95.0 13A52
B93 96.0 13A72
B94 97.0 13A88
B95 98.0 14A04
B96 99.0 14A18
B97 100.0 14A33
V-BeltNo.
OutsideLengthInches
Ref. No.
B98 101.0 14A70
B99 102.0 14A55
B100 103.0 14A93
B101 104.0 15A01
B102 105.0 15A08
B103 106.0 15A20
B104 107.0 15A25
B105 108.0 15A30
B106 109.0 15A55
B107 110.0 15A69
B108 111.0 15A81
B109 112.0 16A02
B110 113.0 16A14
B111 114.0 16A33
B112 115.0 16A49
B113 116.0 16A61
B114 117.0 16A71
B115 118.0 16A79
B116 119.0 16A94
B117 120.0 17A01
B118 121.0 17A16
B119 122.0 17A25
B120 123.0 17A41
B122 125.0 17A60
B123 126.0 17A86
B124 127.0 18A00
B125 128.0 18A18
B126 129.0 18A31
B127 130.0 18A46
B128 131.0 18A51
B130 133.0 18A99
B131 134.0 19A25
B132 135.0 19A40
B133 136.0 19A55
B134 137.0 19A69
B135 138.0 19A76
B136 139.0 19A89
V-BeltNo.
OutsideLengthInches
Ref. No.
B137 140.0 20A05
B138 141.0 20A18
B139 142.0 20A29
B140 143.0 20A45
B141 144.0 20A60
B142 145.0 20A77
B143 146.0 20A81
B144 147.0 21A06
B145 148.0 21A18
B146 149.0 21A33
B147 150.0 21A43
B148 151.0 21A58
B149 152.0 21A69
B150 153.0 22A15
B151 154.0 22A25
B152 155.0 22A53
B153 156.0 22A68
B154 157.0 22A84
B155 158.0 22A91
B156 159.0 23A21
B157 160.0 23A55
B158 161.0 23A60
B160 163.0 23A65
B162 164.0 23A80
B164 167.0 23A91
B165 168.0 24A50
B166 169.0 26A12
B167 170.0 26A55
B168 171.0 28A36
B170 173.0 24A60
B172 175.0 24A89
B173 176.0 25A02
B174 177.0 25A36
B175 178.0 25A53
B177 180.0 25A80
B178 181.0 25A95
B180 183.0 26A24
B Series Belts
PAGE 208 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Gates® Conventional V-BeltsHi-Power® II Belts
V-BeltNo.
OutsideLengthInches
Ref. No.
C46 50.0 12A63
C47 51.0 13A85
C48 52.0 13A90
C49 53.0 13A95
C50 54.0 13A99
C51 55.0 14A04
C52 56.0 14A20
C53 57.0 14A39
C54 58.0 14A93
C55 59.0 15A14
C56 60.0 15A40
C57 61.0 15A67
C58 62.0 15A91
C59 63.0 16A03
C60 64.0 16A49
C61 65.0 17A35
C62 66.0 17A56
C63 67.0 17A69
C64 68.0 17A82
C65 69.0 17A91
C66 70.0 17A76
V-BeltNo.
OutsideLengthInches
Ref. No.
C67 71.0 18A37
C68 72.0 19A11
C69 73.0 19A20
C70 74.0 19A36
C71 75.0 19A41
C72 76.0 19A65
C73 77.0 20A28
C74 78.0 20A32
C75 79.0 20A45
C76 80.0 20A83
C77 81.0 21A09
C78 82.0 21A36
C79 83.0 21A70
C80 84.0 21A99
C81 85.0 22A77
C82 86.0 22A85
C83 87.0 22A91
C84 88.0 22A98
C85 89.0 23A05
C86 90.0 23A34
C87 91.0 23A61
V-BeltNo.
OutsideLengthInches
Ref. No.
C88 92.0 24A59
C89 93.0 24A69
C90 94.0 24A79
C91 95.0 24A85
C92 96.0 25A24
C93 97.0 25A49
C94 98.0 25A77
C95 99.0 26A03
C96 100.0 26A24
C97 101.0 26A53
C98 102.0 26A80
C99 103.0 27A07
C100 104.0 27A90
C101 105.0 28A02
C102 106.0 28A09
C103 107.0 28A20
C104 108.0 28A33
C105 109.0 29A30
C106 110.0 29A45
C107 111.0 29A60
C108 112.0 29A71
V-BeltNo.
OutsideLengthInches
Ref. No.
C109 113.0 29A85
C110 114.0 29A99
C111 115.0 30A26
C112 116.0 30A51
C113 117.0 30A79
C114 118.0 31A00
C115 119.0 31A32
C116 120.0 31A58
C117 121.0 31A88
C118 122.0 32A11
C119 123.0 32A38
C120 124.0 32A65
C121 125.0 33A01
C122 126.0 33A18
C123 127.0 33A51
C124 128.0 33A70
C125 129.0 33A99
C126 130.0 34A25
C127 131.0 34A60
C128 132.0 34A78
C129 133.0 34A81
V-BeltNo.
OutsideLengthInches
Ref. No.
B182 185.0 26A40
B184 187.0 25A17
B190 193.0 27A70
B191 194.0 27A82
B192 195.0 28A05
B195 198.0 28A15
B199 202.0 28A88
B200 203.0 P.O.R.
B201 204.0 P.O.R.
B204 207.0 29A61
V-BeltNo.
OutsideLengthInches
Ref. No.
B205 208.0 29A77
B206 209.0 P.O.R.
B210 213.0 30A15
B212 213.0 31A34
B218 219.0 31A55
B220 221.0 31A78
B221 222.0 32A49
B223 224.0 P.O.R.
B225 226.0 33A01
B228 229.0 33A42
V-BeltNo.
OutsideLengthInches
Ref. No.
B230 231.0 33A79
B234 235.0 33A90
B235 236.0 34A15
B236 237.0 34A70
B237 238.0 34A90
B240 241.0 35A07
B248 249.0 3601
B253 254.0 3682
B255 256.0 36A97
B265 266.0 38A31
V-BeltNo.
OutsideLengthInches
Ref. No.
B270 271.0 39A05
B276 277.0 39A91
B285 286.0 41A20
B290 291.0 42A51
B292 293.0 43A01
B300 301.0 44A34
B315 316.0 46A44
B360 361.0 50A48
B Series Belts - Continued
C Series Belts
Call Toll Free 1-800-457-5348 PAGE 209AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Gates® Conventional V-BeltsHi-Power® II Belts
V-BeltNo.
OutsideLengthInches
Ref. No.
C130 134.0 34A89
C131 135.0 35A40
C132 136.0 35A60
C133 137.0 35A99
C134 138.0 36A20
C135 139.0 36A54
C136 140.0 36A74
C137 141.0 37A10
C138 142.0 37A20
C139 143.0 37A65
C140 144.0 37A90
C142 146.0 38A61
C143 147.0 39A15
C144 148.0 40A07
C145 149.0 40A91
C146 150.0 41A41
C147 151.0 41A60
C148 152.0 41A88
V-BeltNo.
OutsideLengthInches
Ref. No.
C149 153.0
C150 154.0 42A20
C151 155.0 40A99
C152 156.0 41A03
C153 157.0 41A29
C154 158.0 41A68
C155 159.0 41A85
C156 160.0 42A12
C157 161.0 43A01
C158 162.0 43A55
C160 163.0 43A60
C162 164.0 43A64
C165 169.0 44A53
C166 170.0 44A57
C167 171.0 45A06
C168 172.0 45A20
C169 173.0 45A70
C170 174.0 45A87
V-BeltNo.
OutsideLengthInches
Ref. No.
C173 177.0 46A69
C177 181.0 46A90
C178 182.0 47A90
C180 186.0 48A82
C181 185.0 49A20
C182 186.0 51A40
C185 189.0 52A35
C190 194.0 53A10
C195 199.0 48A08
C200 204.0 54A01
C204 208.0 54A24
C206 210.0 55A99
C207 211.0 56A25
C208 212.0 56A39
C210 214.0 57A06
C218 220.0 58A39
C220 222.0 58A51
C225 227.0 60A51
V-BeltNo.
OutsideLengthInches
Ref. No.
C240 242.0 63A13
C248 250.0 65A90
C250 252.0 66A45
C255 257.0 68A54
C265 267.0 69A90
C270 272.0 72A33
C275 277.0 74A90
C280 282.0 75A80
C285 287.0 70A51
C290 292.0 76A90
C295 297.0 79A20
C300 302.0 80A26
C315 317.0 84A22
C360 362.0 94A12
C390 392.0 104A36
C420 422.0 112A58
C Series Belts - Continued
V-BeltNo.
OutsideLengthInches
Ref. No.
3VX250 25.0 5A25
3VX265 26.5 5A75
3VX280 28.0 6A48
3VX300 30.0 6A65
3VX315 31.5 6A97
3VX335 33.5 7A12
3VX355 35.5 7A45
3VX375 37.5 7A61
3VX400 40.0 8A08
3VX425 42.5 8A38
3VX450 45.0 8A71
V-BeltNo.
OutsideLengthInches
Ref. No.
3VX475 47.5 9A02
3VX500 50.0 9A20
3VX530 53.0 9A51
3VX550 55.0 9A71
3VX560 56.0 9A82
3VX600 60.0 10A29
3VX630 63.0 10A61
3VX650 65.0 10A91
3VX670 67.0 11A08
3VX710 71.0 11A71
3VX750 75.0 12A36
V-BeltNo.
OutsideLengthInches
Ref. No.
3VX800 80.0 13A15
3VX850 85.0 14A08
3VX900 90.0 15A20
3VX950 95.0 15A99
3VX1000 100.0 16A94
3VX1060 106.0 17A89
3VX1120 112.0 19A47
3VX1180 118.0 20A74
3VX1250 125.0 22A17
3VX1320 132.0 23A42
3VX1400 140.0 26A37
3VX Series Belts
PAGE 210 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Gates® Conventional V-BeltsHi-Power® II Belts
5VX Series Belts
V-Belt No.Outside
Length (in)Ref. No.
5VX450 45.0
5VX500 50.0 19A90
5VX510 51.0
5VX530 53.0 19A70
5VX560 56.0 20A59
5VX600 60.0 22A28
5VX630 63.0 23A35
5VX650 65.0
5VX670 67.0 24A90
5VX710 71.0 26A43
5VX750 75.0 27A98
5VX800 80.0 29A83
5VX810 81.0
5VX830 83.0
5VX850 85.0 32A12
5VX860 86.0
5VX880 88.0
5VX890 89.0
5VX900 90.0 34A14
5VX950 95.0 35A82
5VX960 96.0
5VX990 99.0
5VX1000 100.0 37A80
5VX1030 103.0
5VX1050 105.0
5VX1060 106.0 40A12
5VX1080 108.0
5VX1108 110.8
5VX1120 112.0 42A41
5VX1150 115.0
5VX1160 116.0
5VX1180 118.0 44A73
5VX1220 122.0
5VX1250 125.0 47A50
5VX1320 132.0 50A10
5VX1400 140.0 52A87
5VX1500 150.0 56A87
5VX1600 160.0 59A50
5VX1700 170.0 61A50
5VX1800 180.0 63A57
5VX1900 190.0 74A38
5VX2000 200.0 75A45
V-BeltNo.
OutsideLength (in)
Ref. No.
AA51 53.0 11A25
AA55 57.0 12A01
AA60 62.0 12A85
AA62 64.0 POR
AA64 66.0 13A05
AA66 68.0 13A76
AA68 70.0 16A02
AA70 72.0
AA73 75.0
AA75 77.0 17A41
AA78 80.0
AA80 82.0 18A80
AA85 87.0 POR
AA88 90.0
AA90 92.0 POR
AA92 94.0 POR
AA96 98.0 19A02
AA105 107.0 25A05
AA112 114.0 24A01
AA120 122.0 29A94
AA128 130.0 32A05
AA148 150.0
AA Series Belts
V-Belt No.Outside
Length (in)Ref. No.
BB43 46.0 POR
BB45 48.0 POR
BB46 49.0
BB51 54.0 POR
BB53 56.0 POR
BB55 58.0 20A19
BB60 63.0 20A89
BB64 67.0
BB66 69.0
BB68 71.0 23A02
BB71 74.0 23A89
BB72 75.0 POR
BB73 76.0 POR
BB74 77.0 POR
BB75 78.0 25A05
BB81 84.0 27A16
BB83 86.0 27A90
BB Series Belts
Call Toll Free 1-800-457-5348 PAGE 211AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Cast Iron SheavesFor 4L, 5L, A Section and B Section Belts
Part # Ref. No. Outside Diameter
BK30H 12A30 3.15”
BK32H 15A42 3.35”
BK34H 13A10 3.55”
BK36H 13A34 3.75”
BK40H 13A40 3.95”
BK45H 13A45 4.25”
BK47H 13A79 4.45”
BK50H 14A08 4.75”
BK52H 14A35 4.95”
BK55H 14A71 5.25”
BK57H 14A97 5.45”
BK60H 15A30 5.75”
BK62H 15A94 5.95”
BK65H 17A00 6.25”
BK67H 17A52 6.45”
BK70H 18A09 6.75”
BK72H 18A93 6.95”
BK75H 19A73 7.25”
BK77H 19A99 7.45”
BK80H 20A34 7.75”
BK85H 22A56 8.25”
BK90H 24A03 8.75”
BK95H 26A47 9.25”
BK100H 26A96 9.75”
BK105H 27A36 10.25”
BK110H 27A83 10.75”
BK115H 30A38 11.25”
BK120H 33A50 11.75”
BK130H 35A72 12.75”
BK140H 42A67 13.75”
BK150H 43A05 14.75”
BK160H 47A29 15.75”
BK190H 61A05 18.75”
BK Sheaves are accurately machined from gray cast iron, statically balanced, painted, and individually packaged. Order part number and size (for example: BK24 x 5/8”).
Part # Bore Keyseat Ref. No.
H3/8 3/8” None 5A95
H7/16 7/16” None 5A95
H1/2 1/2” 1/8” x 1/16” 5A95
H9/16 9/16” 1/8” x 1/16” 5A95
H5/8 5/8” 3/16” x 3/32” 5A95
H11/16 11/16” 3/16” x 3/32” 5A95
H3/4 3/4” 3/16” x 3/32” 5A95
H13/16 13/16” 3/16” x 3/32” 5A95
H7/8 7/8” 3/16” x 3/32” 5A95
H15/16 15/16” 1/4” x 1/8” 5A95
H1 1” 1/4” x 1/8” 5A95
H1 1/16 1 1/16” 1/4” x 1/8” 5A95
H1 1/8 1 1/8” 1/4” x 1/8” 5A95
H1 3/16 1 3/16” 1/4” x 1/8” 5A95
H1 1/4 1 1/4” 1/4” x 1/8” 5A95
H1 5/16 1 5/16” *5/16” x 1/16” 5A95
H1 3/8 1 3/8” *5/16” x 1/16” 5A95
H1 7/16 1 7/16” *3/8” x 1/16” 5A95
H1 1/2 1 1/2” *3/8” x 1/16” 5A95
Single Grove Bushing Type
*Note: Shallow keyset. Key furnished to fi t a standard depth keyset in shaft.
PAGE 212 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Part # Ref. No. Outside Diameter Stock Bore (inches)
BK24 7A53 2.40” 1/2, 5/8, 3/4, 7/8
BK25 7A80 2.50” 1/2, 5/8, 3/4, 7/8, 1
BK26 8A19 2.60” 1/2, 5/8, 3/4, 7/8
BK27 8A59 2.70” 1/2, 5/8, 3/4, 7/8, 1
BK28 8A65 2.95” 1/2, 5/8, 3/4, 7/8, 1, 1 1/8
BK30 9A43 3.15” 1/2, 5/8, 3/4, 7/8, 1
BK32 10A58 3.35” 1/2, 5/8, 3/4, 7/8, 1
BK34 11A77 3.55” 1/2, 5/8, 3/4, 7/8, 1, 1 1/8
BK36 12A78 3.75” 1/2, 5/8, 3/4, 7/8, 1”, 1 1/8
BK40 13A38 3.95” 1/2, 5/8, 3/4, 7/8, 1, 1 1/8
BK45 13A62 4.25” 1/2, 5/8, 3/4, 7/8, 1, 1 1/8
BK47 14A73 4.45” 1/2, 5/8, 3/4, 7/8, 1, 1 1/8
BK50 14A91 4.75” 1/2, 5/8, 3/4, 7/8, 1, 1 1/8
BK52 14A97 4.95” 1/2, 5/8, 3/4, 7/8, 1, 1 1/8
BK55 15A86 5.25” 1/2, 5/8, 3/4, 7/8, 1, 1 1/8, 1 3/16
BK57 16A55 5.45” 5/8, 3/4, 7/8, 15/16, 1, 1 1/8
BK60 17A04 5.75” 1/2, 5/8, 3/4, 7/8, 1, 1 1/8, 1 3/16
BK62 17A15 5.95” 1/2, 5/8, 3/4, 7/8, 15/16, 1, 1 1/8, 1 3/16
BK65 19A21 6.25” 5/8, 3/4, 1, 1 1/8
BK67 19A91 6.45” 5/8, 3/4, 1, 1 1/8
BK70 22A23 6.75” 5/8, 3/4, 15/16, 1, 1 1/8, 1 3/16, 1 7/16
BK72 23A59 6.95” 3/4, 1, 1 1/8, 1 3/8
BK75 24A05 7.25” 3/4, 1, 1 1/8
BK77 24A29 7.45” 3/4, 1, 1 1/8, 1 3/8
BK80 24A63 7.75” 5/8, 3/4, 7/8, 1, 1 1/8, 1 3/16, 1 1/4, 1 3/8, 1 7/16
BK85 27A69 8.25” 3/4, 1, 1 1/8, 1 3/8, 1 7/16
BK90 28A52 8.75” 3/4, 7/8, 15/16, 1, 1 1/8, 1 3/16, 1 3/8, 1 7/16
BK95 30A04 9.25” 3/4, 1, 1 1/8, 1 3/8
BK100 31A53 9.75” 3/4, 7/8, 15/16, 1, 1 1/8, 1 3/16, 1 1/4, 1 3/8, 1 7/16
BK105 33A88 10.25” 1, 1 3/8,1 7/16
BK110 36A25 10.75” 3/4, 1, 1 1/8,1 3/16 ,1 3/8, 1 7/16
BK115 37A78 11.25” 1, 1 7/16
BK120 38A66 11.75” 3/4, 1, 1 3/16, 1 7/16
BK130 43A24 12.75” 3/4, 1, 1 1/8, 1 3/16, 1 1/4, 1 7/16
BK140 55A38 13.75” 3/4, 1, 1 3/16, 1 7/16
BK160 67A52 15.75” 1, 1 1/8, 1 3/16, 1 1/4, 1 7/16
BK190 77A68 18.75” 1, 1 3/16, 1 1/4, 1 7/16
Single Groove Bored To Size
Cast Iron SheavesFor 4L, 5L, A Section and B Section Belts
Call Toll Free 1-800-457-5348 PAGE 213AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Cast Iron SheavesFor 4L, 5L, A Section and B Section Belts
Part # Ref. No. Outside Diameter
2BK32H 22A50 3.35”
2BK34H 22A50 3.55”
2BK36H 22A95 3.75”
2BK40H 23A21 3.95”
2BK45H 23A79 4.25”
2BK47H 26A23 4.45”
2BK50H 26A70 4.75”
2BK52H 27A36 4.95”
2BK55H 29A62 5.25”
2BK57H 30A13 5.45”
2BK60H 30A85 5.75”
2BK62H 30A50 5.95”
2BK65H 33A67 6.25”
2BK67H 34A23 6.45”
2BK70H 36A64 6.75”
2BK80H 40A89 7.75”
2BK90H 41A60 8.75”
2BK100H 48A30 9.75”
2BK110H 52A40 ---
2BK120H 59A77 10.75”
2BK130H 64A15 11.75”
2BK140H 72A64 12.75”
2BK160H 76A20 13.75”
2BK190H 85A52 15.75”
BK Sheaves are accurately machined from gray cast iron, statically balanced, painted, and individually packaged. Order part number and size (for example: BK24 x 5/8”).
Part # Bore Keyseat Ref. No.
H3/8 3/8” None 5A95
H7/16 7/16” None 5A95
H1/2 1/2” 1/8” x 1/16” 5A95
H9/16 9/16” 1/8” x 1/16” 5A95
H5/8 5/8” 3/16” x 3/32” 5A95
H11/16 11/16” 3/16” x 3/32” 5A95
H3/4 3/4” 3/16” x 3/32” 5A95
H13/16 13/16” 3/16” x 3/32” 5A95
H7/8 7/8” 3/16” x 3/32” 5A95
H15/16 15/16” 1/4” x 1/8” 5A95
H1 1” 1/4” x 1/8” 5A95
H1 1/16 1 1/16” 1/4” x 1/8” 5A95
H1 1/8 1 1/8” 1/4” x 1/8” 5A95
H1 3/16 1 3/16” 1/4” x 1/8” 5A95
H1 1/4 1 1/4” 1/4” x 1/8” 5A95
H1 5/16 1 5/16” *5/16” x 1/16” 5A95
H1 3/8 1 3/8” *5/16” x 1/16” 5A95
H1 7/16 1 7/16” *3/8” x 1/16” 5A95
H1 1/2 1 1/2” *3/8” x 1/16” 5A95
Two Grove Bushing Type
*Note: Shallow keyset. Key furnished to fi t a standard depth keyset in shaft.
PAGE 214 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Cast Iron SheavesFor 4L, 5L, A Section and B Section Belts
Part # Ref. No. Outside Diameter Stock Bore (inches)
2BK25 18A89 2.50” 1/2, 5/8, 3/4, 7/8
2BK27 19A63 2.70” 1/2, 5/8, 3/4, 7/8, 1, 1 1/8
2BK28 21A07 2.95” 1/2, 5/8, 3/4, 7/8, 1, 1 1/8
2BK30 22A68 3.15” 1/2, 5/8, 3/4, 7/8, 1, 1 1/8
2BK32 23A38 3.35” 5/8, 3/4, 7/8, 1, 1 1/8
2BK34 24A44 3.55” 5/8, 3/4, 7/8, 1, 1 1/8
2BK36 25A07 3.75” 5/8, 3/4, 7/8, 1, 1 1/8, 1 3/8
2BK40 26A23 3.95” 5/8, 3/4, 7/8, 1, 1 1/8
2BK45 28A16 4.25” 1, 1 1/8, 1 3/8
2BK47 28A52 4.45” 7/8, 1, 1 1/8
2BK50 30A12 4.75” 3/4, 1, 1 1/8, 1 3/8
2BK52 30A24 4.95” 5/8, 7/8, 1, 1 1/8, 1 3/8
2BK55 32A64 5.25” 1 1/8, 1 3/8
2BK57 33A59 5.45” 1, 1 1/8, 1 3/8
2BK60 35A05 5.75” 3/4, 7/8, 1, 1 1/8, 1 3/8
2BK62 35A77 5.95” 1, 1 1/8
2BK65 37A95 6.25” 1, 1 1/8, 1 3/8
2BK67 40A13 6.45” 1, 1 1/8, 1 3/8
2BK70 44A50 6.75” 3/4, 1, 1 1/8, 1 3/16, 1 3/8, 1 7/16
2BK80 47A26 7.75” 3/4, 1, 1 1/8, 1 3/16, 1 3/8, 1 7/16
2BK90 48A84 8.75” 3/4, 1, 1 1/8, 1 3/16, 1 3/8, 1 7/16
2BK100 57A45 9.75” 3/4, 1, 1 3/16, 1 3/8, 1 7/16
2BK110 61A04 10.75” 1, 1 3/16, 1 7/16
2BK120 66A12 11.75” 1, 1 3/16, 1 7/16
2BK130 74A32 12.75” 1, 1 3/16, 1 7/16
2BK140 77A95 13.75” 1, 1 3/16, 1 7/16
2BK160 92A87 15.75” 1, 1 3/16, 1 7/16
2BK190 119A09 18.75” 1 3/16, 1 7/16
Two Groove Bored To Size
Call Toll Free 1-800-457-5348 PAGE 215AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Solid Shaft CollarsZinc Plated - Screw Set Type
Part # & Bore Size Ref. No. Outside Diameter Width Set Screw Type
SC-1/8” 0A46 3/8” 1/4” 6-40
SC-3/16” 0A49 7/16” 1/4” 8-32
SC-1/4” 0A52 1/2” 5/16” 10-32
SC-5/16” 0A56 5/8” 5/16” 10-32
SC-3/8” 0A59 3/4” 3/8” 1/4-20
SC-7/16” 0A61 7/8” 7/16” 1/4-20
SC-1/2” 0A62 1” 7/16” 1/4-20
SC-9/16” 0A65 1” 7/16” 1/4-20
SC-5/8” 0A69 1 1/18” 1/2” 5/16-8
SC-11/16” 0A74 1 1/4” 9/16” 5/16-8
SC-3/4” 0A79 1 1/4” 9/16” 5/16-8
SC-13/16” 0A87 1 5/16” 9/16” 5/16-8
SC-7/8” 0A92 1 1/2” 9/16” 5/16-8
SC-15/16” 0A95 1 1/2” 9/16” 5/16-8
SC-1” 1A05 1 5/8” 5/8” 5/16-8
SC-1 1/16” 1A17 1 3/4” 5/8” 5/16-8
SC-1 1/8” 1A18 1 3/4” 5/8” 5/16-8
We also offer split shaft collars and stainless steel set collars.
Ask your sales representative for details.
PAGE 216 Call Toll Free 1-800-457-5348AGRI Industrial Supply Inc.
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Part # & Bore Size Ref. No. Outside Diameter Width Set Screw Type
SC-1 3/16” 1A49 2” 11/16” 3/8-16
SC-1 1/4” 1A60 2” 11/16” 3/8-16
SC-1 5/16” 1A83 2 1/8” 11/16” 3/8-16
SC-1 3/8” 2A01 2 1/8” 3/4” 3/8-16
SC-1 7/16” 2A09 2 1/4” 3/4” 3/8-16
SC-1 1/2” 2A11 2 1/4” 3/4” 3/8-16
SC-1 9/16” 2A20 2 1/2” 13/16” 3/8-16
SC-1 5/8” 2A85 2 1/2” 13/16” 3/8-16
SC-1 11/16” 2A93 2 1/2” 13/16” 3/8-16
SC-1 3/4” 2 3A25 2 3/4” 7/8” 1/2-13
SC-1 13/16” 3A59 2 3/4” 7/8” 1/2-13
SC-1 7/8” 3A64 2 3/4” 7/8” 1/2-13
SC-1 15/16” 3A67 3” 7/8” 1/2-13
SC-2” 4A20 3” 7/8” 1/2-13
SC-2 1/16” 4A25 3” 7/8” 1/2-13
SC-2 1/8” 4A45 3” 7/8” 1/2-13
SC-2 3/16” 4A51 3 1/4” 15/16” 1/2-13
SC-2 1/4” 4A80 3 1/4” 15/16” 1/2-13
SC-2 5/16” 4A84 3 1/4” 15/16” 1/2-13
SC-2 3/8” 4A89 3 1/4” 15/16” 1/2-13
SC-2 7/16” 5A07 3 1/2” 1” 1/2-13
SC-2 1/2” 5A35 3 1/2” 1” 1/2-13
SC-2 9/16” 5A59 3 3/4” 1 1/8” 1/2-13
SC-2 5/8” 5A65 4” 1 1/8” 1/2-13
SC-2 11/16” 5A65 4” 1 1/8” 1/2-13
SC-2 3/4” 5A65 4” 1 1/8” 1/2-13
SC-2 7/8” 5A83 4 1/4” 1 1/8” 1/2-13
SC-2 15/16” 8A41 4 1/4” 1 1/8” 1/2-13
SC-3” 8A41 4 1/4” 1 1/8” 1/2-13
Solid Shaft CollarsZinc Plated - Screw Set Type
1-800-457-5348 • FAX 901-366-7257
[email protected] Cherry Road
Memphis, TN 38118
Call Toll Free 1-800-457-5348 AGRI Industrial Supply Inc.