cast steel flanged gate, globe, & check · pdf filecast steel flanged gate, globe, &...
TRANSCRIPT
2
FNW cast steel gate, globe, and check valves are manufactured according to the following standards: • Pressure/Temperature Rating per ANSI B16.34 • Flange Dimensions per ANSI B16.5 • Face to Face Dimensions per ANSI B16.10 • Carbon Steel Valves Designed to API 600 • Stainless Steel Valves Designed to API 603 • Pressure Tested to API 598
StandardsFNW Valve Company offers many options and modifications for their cast steel valves. These include, but are not limited to: • By-Passes - A By-Pass is primarily used to
equalize pressure between the valve inlet and outlet before opening the main valve. Equalizing pressure makes opening the main valve easier, especially on valves with a high differential pressure. In high temperature applications, a by-pass allows preheating of the downstream line to lessen the shock of thermal expansion.
• Actuation & Accessories - FNW Valve can supply an assortment of actuation types and accessories including ratchets, chain wheels, square drive nuts, gear-operators, pneumatic and hydraulic cylinders, and motor operators. We can also supply accessories ranging from solenoids, position switches, and positioners, to network controls and valve monitors.
• Packing Options - Different applications can have different needs. FNW Valve offers packing materials for various pH and temperature requirements.
• Stem Extensions & Floor Stands - For remote applications, custom stem extensions and non-rising stem (NRS) adapters are available in carbon and stainless steel. Also available are floor stands made to order to your specifications.
Options & Accessories
IndexOptions & Accessories ................................................................................................................................. 2Standards ..................................................................................................................................................... 2Figure Number Matrix .................................................................................................................................. 3Pressure/Temperature Ratings .................................................................................................................... 3Hydrostatic Test Pressures .......................................................................................................................... 3
Carbon Steel ValvesFig No Type
551 ............................................................. 150# Gate Valve ...................................................................... 4552 ............................................................. 300# Gate Valve ...................................................................... 5561 ............................................................. 150# Globe Valve .................................................................... 6562 ............................................................. 300# Globe Valve .................................................................... 7571 ............................................................. 150# Swing Check Valve ......................................................... 8572 ............................................................. 300# Swing Check Valve ......................................................... 9
Stainless Steel ValvesFig No Type
451A ........................................................... 150# Gate Valve .................................................................... 10452A ........................................................... 300# Gate Valve .....................................................................11461A ........................................................... 150# Globe Valve .................................................................. 12462A ........................................................... 300# Globe Valve .................................................................. 13471A ........................................................... 150# Swing Check Valve ....................................................... 14472A ........................................................... 300# Swing Check Valve ....................................................... 15
3
Pressure / Temperature Ratings
Temperature(°F)
Max. Working Pressure(PSI)Class 150 Class 300
-20° to 100° 275 720200° 240 620300° 215 560400° 195 515500° 170 480600° 140 450650° 125 445700° 110 430750° 95 425800° 80 415850° 65 405900° 50 395950° 30 3851000° 20 3651050°(4) 20 3601100°(4) 20 3251150°(4) 20 2751200°(4) 20 2051250°(4) 20 1801300°(4) 20 1401350°(4) 20 1051400°(4) 20 751450°(4) 20 601500°(4) 10 40
Carbon Steel ValvesClass 150# 300#Shell 450 1125Seat 315 815
Hydrostatic Test Pressures
1. Pressures and temperatures listed are the maximum of the contained fluid. The pressures and temperatures listed are based on shell material only. Consideration must also be given to the bolting, trim, gasket, and packing material. For the pressure and temperature ratings for materials not given in the tables above, and for ratings for special class valves (available on special order), see ANSI B16.34.
2. A valve used under the jurisdiction of the ASTM Boiler and Pressure Vessel Code, the ANSI Code for Pressure Piping, or for Government Regulations is subject to any limitation of that code or regulation.
3. Materials shall not be used beyond the maximum temperature in the rating table.
4. Applies to weld end valves only. Flanged end valve ratings terminate at 1000°F (538°C ).
Figure Number MatrixFNW 5 5 1 X
SIZE ASTM A216 Gr. WCB = 5 ASTM A351 Gr. CF8M = 4
BODY/BONNET MATERIAL
Note: All figure number combinations may not be available or are Price On Availability (POA) only. Other sizes, materials and trim types may also be available. Contact FNW with your specifications.
OS&Y GATE = 5 GLOBE = 6 SWING CHECK = 7
VALVE TYPE 150# = 1 300# = 2
PRESSURE CLASS 1-1/2 = J 2 = K 2-1/2 = L 3 = M 4 = P 6 = U 8 = X
10 = 10 12 = 12 14 = 14 16 = 16 18 = 18 20 = 20 24 = 24
Stainless Steel MaterialA351-CF8M, A182-F316
Temperature(°F)
Max. Working Pressure(PSI)Class 150 Class 300
-20° to 100° 285 740200° 260 675300° 230 655400° 200 635500° 170 600600° 140 550650° 125 535700° 110 535750° 95 505800° 80 410850° 65 270900° 50 170950° 35 1051000° 20 50
Carbon Steel MaterialA105, A216WCB
Stainless Steel ValvesClass 150# 300#Shell 425 1100Seat 305 795
4
Figure 551
150# Carbon Steel OS&Y Gate Valve
(OPEN)
Size 2 2-1/2 3 4 6 8 10 12 14 16 18 20 24Port 2.01 2.52 2.99 4.02 5.98 7.99 10.00 12.01 13.27 15.24 17.24 19.25 23.27
L 7.01 7.48 7.99 9.02 10.51 11.50 12.99 14.02 15.00 15.98 17.01 17.99 20.00H 15.20 17.13 19.02 23.11 30.20 37.60 45.12 52.28 59.80 67.76 74.80 83.31 97.64
ØE 7.87 7.87 9.84 9.84 11.81 13.78 15.75 17.72 19.68 22.05 25.20 25.20 28.35
Flan
ge D
imen
sions F 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06
ØG 5.98 7.01 7.48 9.02 10.98 13.50 15.98 19.02 20.98 23.50 25.00 27.52 32.01ØI 3.62 4.13 5.00 6.18 8.50 10.63 12.76 15.00 16.26 18.50 20.98 22.99 27.24ØJ 4.74 5.49 6.00 7.50 9.51 11.75 14.25 17.01 18.74 21.26 22.76 25.00 29.51T 0.75 0.89 0.94 0.94 1.02 1.14 1.22 1.26 1.38 1.46 1.57 1.69 1.89M 4 4 4 8 8 8 12 12 12 16 16 20 20
ØN 0.75 0.75 0.75 0.75 0.87 0.87 0.98 0.98 1.14 1.14 1.26 1.26 1.38Wt. (lbs.) 40 57 68 104 181 254 419 538 849 1,213 1,455 1,786 2,756
Dimensions (inches) & Weights (lbs)
No. Part Name Material1 Body ASTM A216 Gr. WCB4 Disc ASTM A216 WCB
+13%Cr Faced5 Stem ASTM A182 Gr. F69 Bonnet ASTM A216 Gr. WCB11 Gasket 304+Graphite, Spiral Wound12 Seat Ring ASTM A105 + STL#6 Faced14 Stem Packing Braided Graphite
+Die Formed Graphite Ring15 Gland ASTM A276 Type 41018 Yoke Sleeve ASTM A439 Gr. D219 Hand Wheel Malleable Iron20 Rivet SS304
20-1 Screw Carbon Steel22 Stem Retainer Nut Carbon Steel24 Hand Wheel Nut Carbon Steel25 Name Plate SS30435 Bonnet Bolt ASTM A193 Gr. B737 Bonnet Bolt Nut ASTM A194 Gr. 2H40 Gland Bolt ASTM A193 Gr. B7
40-1 Gland Nut ASTM A194 Gr. 2H47 Gland Flange ASTM A216 Gr. WCB48 Gland Bolt Pin ASTM A216 Gr. WCB52 Back Seat ASTM A276 Type 41053 Grease Fitting Carbon Steel
NOTES:14" and larger valves have 2-piece yoke and bonnet 16" and larger valves include a gear operator Design per API 600 Pressure/Temperature Rating per ANSI B16.34 Flange Dimensions per ANSI B16.5 Face to Face Dimensions per ANSI B16.10 Pressure Tested per API 598
Standard Materials
5
Figure 552
300# Carbon Steel OS&Y Gate Valve
(OPEN)
Size 2 2-1/2 3 4 6 8 10 12 14 16 18 20 24Port 2.01 2.52 2.99 4.02 5.98 7.99 10.00 12.01 13.27 15.24 17.01 19.02 22.99
L 8.50 9.49 11.10 12.01 15.87 16.50 17.99 19.76 30.00 32.99 35.98 39.02 45.00H 16.42 18.11 20.71 25.59 32.44 38.86 46.93 56.34 61.38 69.21 76.46 84.45 114.33
ØE 7.87 7.87 9.84 9.84 13.78 15.75 17.72 19.68 22.05 25.20 25.20 28.35 29.92
Flan
ge D
imen
sions F 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06
ØG 6.50 7.48 8.27 10.00 12.52 15.00 17.52 20.51 22.99 25.51 27.99 30.51 35.98ØI 3.62 4.13 5.00 6.18 8.50 10.63 12.76 15.00 16.26 18.50 20.98 22.99 27.24ØJ 5.00 5.87 6.63 7.87 10.63 12.99 15.26 17.76 20.26 22.50 24.74 27.01 32.01T 0.91 1.02 1.14 1.26 1.46 1.65 1.89 2.01 2.13 2.28 2.40 2.52 2.76M 8 8 8 8 12 12 16 16 20 20 24 24 24
ØN 0.75 0.87 0.87 0.87 0.87 0.98 1.14 1.26 1.26 1.38 1.38 1.38 1.61Wt. (lbs.) 68 86 101 148 293 503 747 1,027 1,541 2,227 2,657 3,792 5,754
Dimensions (inches) & Weights (lbs)
No. Part Name Material1 Body ASTM A216 Gr. WCB4 Disc ASTM A216 WCB
+13%Cr Faced5 Stem ASTM A182 Gr. F69 Bonnet ASTM A216 Gr. WCB11 Gasket 304+Graphite, Spiral Wound12 Seat Ring ASTM A105 + STL#6 Faced14 Stem Packing Braided Graphite
+Die Formed Graphite Ring15 Gland ASTM A276 Type 410
15-1 Lantern Ring ASTM A276 Type 41018 Yoke Sleeve ASTM A439 Gr. D219 Hand Wheel Malleable Iron20 Rivet SS304
20-1 Screw Carbon Steel22 Stem Retainer Nut Carbon Steel24 Hand Wheel Nut Carbon Steel25 Name Plate SS30435 Bonnet Bolt ASTM A193 Gr. B737 Bonnet Bolt Nut ASTM A194 Gr. 2H40 Gland Bolt ASTM A193 Gr. B7
40-1 Gland Nut ASTM A194 Gr. 2H47 Gland Flange ASTM A216 Gr. WCB48 Gland Bolt Pin ASTM A216 Gr. WCB52 Back Seat ASTM A276 Type 41053 Grease Fitting Carbon Steel
NOTES:12" and larger valves have 2-piece yoke and bonnet 16" and larger valves include a gear operator Design per API 600 Pressure/Temperature Rating per ANSI B16.34 Flange Dimensions per ANSI B16.5 Face to Face Dimensions per ANSI B16.10 Pressure Tested per API 598
Standard Materials
6
Figure 561
150# Carbon Steel Globe Valve
(OPEN)
Size 2 2-1/2 3 4 6 8 10 12Port 2.01 2.52 2.99 4.02 5.98 7.99 10.00 12.01
L 7.99 8.50 9.49 11.50 15.98 19.49 24.49 27.48H 13.43 14.45 14.76 19.02 21.26 23.23 29.68 37.05
ØE 7.87 7.87 9.84 11.81 13.78 15.75 17.72 25.20
Flan
ge D
imen
sions F 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06
ØG 5.98 7.01 7.48 9.02 10.98 13.50 15.98 19.02ØI 3.62 4.13 5.00 6.18 8.50 10.63 12.76 15.00ØJ 4.74 5.49 6.00 7.50 9.51 11.75 14.25 17.01T 0.75 0.89 0.94 0.94 1.02 1.14 1.22 1.26M 4 4 4 8 8 8 12 12
ØN 0.75 0.75 0.75 0.75 0.87 0.87 0.98 0.98Wt. (lbs.) 42 62 77 130 216 351 633 972
Dimensions (inches) & Weights (lbs)
No. Part Name Material1 Body ASTM A216 Gr. WCB4 Disc ASTM A216 WCB
+13%Cr Faced5 Stem ASTM A182 Gr. F67 Disc Nut ASTM A276 Type 4109 Bonnet ASTM A216 Gr. WCB11 Gasket 304+Graphite, Spiral Wound12 Seat Ring ASTM A105 + STL#6 Faced13 Disc Thrust Plate ASTM A276 Type 41014 Stem Packing Braided Graphite
+Die Formed Graphite Ring15 Gland ASTM A276 Type 41018 Yoke Sleeve ASTM A439 Gr. D219 Hand Wheel Malleable Iron20 Rivet SS304
20-1 Screw Carbon Steel22 Stem Retainer Nut Carbon Steel23 Hand Wheel
Washer Carbon Steel24 Hand Wheel Nut Carbon Steel25 Name Plate SS30435 Bonnet Bolt ASTM A193 Gr. B737 Bonnet Bolt Nut ASTM A194 Gr. 2H40 Gland Bolt ASTM A193 Gr. B7
40-1 Gland Nut ASTM A194 Gr. 2H47 Gland Flange ASTM A216 Gr. WCB48 Gland Bolt Pin ASTM A216 Gr. WCB52 Back Seat ASTM A276 Type 41053 Grease Fitting Carbon Steel
NOTES:Design per API 600Pressure/Temperature Rating per ANSI B16.34Flange Dimensions per ANSI B16.5Face to Face Dimensions per ANSI B16.10Pressure Tested per API 598
Standard Materials
7
Figure 562
300# Carbon Steel Globe Valve
(OPEN)
Size 2 2-1/2 3 4 6 8 10 12Port 2.01 2.52 2.99 4.02 5.98 7.99 10.00 12.01
L 10.51 11.50 12.52 14.02 17.48 22.01 24.49 27.99H 13.74 14.80 16.93 19.13 24.33 36.89 37.36 39.17
ØE 7.87 9.84 9.84 13.78 17.72 22.05 25.20 25.20
Flan
ge D
imen
sions F 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06
ØG 6.50 7.48 8.27 10.00 12.52 15.00 17.52 20.51ØI 3.62 4.12 5.00 6.18 8.50 10.63 12.76 15.00ØJ 5.00 5.87 6.63 7.87 10.63 12.99 15.26 17.76T 0.91 1.02 1.14 1.26 1.46 1.65 1.89 2.01M 8 8 8 8 12 12 16 16
ØN 0.75 0.87 0.87 0.87 0.87 0.98 1.14 1.26Wt. (lbs.) 66 104 150 231 346 666 959 1,272
Dimensions (inches) & Weights (lbs)
Standard MaterialsNo. Part Name Material1 Body ASTM A216 Gr. WCB4 Disc ASTM A216 WCB
+13%Cr Faced5 Stem ASTM A182 Gr. F67 Disc Nut ASTM A276 Type 4109 Bonnet ASTM A216 Gr. WCB11 Gasket 304+Graphite, Spiral Wound12 Seat Ring ASTM A105 + STL#6 Faced13 Disc Thrust Plate ASTM A276 Type 41014 Stem Packing Braided Graphite
+Die Formed Graphite Ring15 Gland ASTM A276 Type 410
15-1 Lantern Ring ASTM A276 Type 41018 Yoke Sleeve ASTM A439 Gr. D219 Hand Wheel Malleable Iron20 Rivet SS304
20-1 Screw Carbon Steel22 Stem Retainer Nut Carbon Steel23 Hand Wheel
Washer Carbon Steel24 Hand Wheel Nut Carbon Steel25 Name Plate SS30435 Bonnet Bolt ASTM A193 Gr. B737 Bonnet Bolt Nut ASTM A194 Gr. 2H40 Gland Bolt ASTM A193 Gr. B7
40-1 Gland Nut ASTM A194 Gr. 2H47 Gland Flange ASTM A216 Gr. WCB48 Gland Bolt Pin ASTM A216 Gr. WCB52 Back Seat ASTM A276 Type 41053 Grease Fitting Carbon Steel
NOTES:Design per API 600Pressure/Temperature Rating per ANSI B16.34Flange Dimensions per ANSI B16.5Face to Face Dimensions per ANSI B16.10Pressure Tested per API 598
8
Figure 571
150# Carbon Steel Swing Check Valve
Size 2 2-1/2 3 4 6 8 10 12 14 16 18 20 24Port 2.01 2.52 2.99 4.02 5.98 7.99 10.00 12.01 13.27 15.24 17.24 19.25 23.27
L 7.99 8.50 9.49 11.50 14.02 19.49 24.49 27.48 30.98 34.02 38.50 38.50 50.98H 5.31 5.83 6.61 9.25 10.91 13.35 15.67 20.67 23.03 22.99 26.30 28.03 29.13
Flan
ge D
imen
sions F 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06
ØG 5.98 7.01 7.48 9.02 10.98 13.50 15.98 19.02 20.98 23.50 25.00 27.52 32.01ØI 3.62 4.13 5.00 6.18 8.50 10.63 12.76 15.00 16.26 18.50 20.98 22.99 27.24ØJ 4.74 5.49 6.00 7.50 9.51 11.75 14.25 17.01 18.74 21.26 22.76 25.00 29.51T 0.75 0.89 0.94 0.94 1.02 1.14 1.22 1.26 1.38 1.46 1.57 1.69 1.89M 4 4 4 8 8 8 12 12 12 16 16 20 20
ØN 0.75 0.75 0.75 0.75 0.87 0.87 0.98 0.98 1.14 1.14 1.26 1.26 1.38Wt. (lbs.) 256 42 62 88 148 258 439 659 816 1,257 1,466 1,984 2,996
Dimensions (inches) & Weights (lbs)
Standard MaterialsNo. Part Name Material1 Body ASTM A216 Gr. WCB2 Plug Carbon Steel3 Plug Seal Carbon Steel4 Disc ASTM A216 WCB + 13%Cr
Faced7 Disc Nut Stainless Steel8 Disc Washer Stainless Steel9 Bonnet ASTM A216 Gr. WCB11 Body Seal 304+Graphite, Spiral Wound12 Seat Ring ASTM A105 + STL#6 Faced20 Rivet SS30425 Names Plate SS30435 Body Bolt ASTM A193 Gr. B737 Bolt Nut ASTM A194 Gr. 2H40 Eye Bolt ASTM A29 1035 (4" & Larger)48 Hinge Pin ASTM A276 Type 410
48-1 Split Pin ASTM A276 Type 41063 Hinge ASTM A216 Gr. WCB
NOTES:Design per API 600Pressure/Temperature Rating per ANSI B16.34Flange Dimensions per ANSI B16.5Face to Face Dimensions per ANSI B16.10Pressure Tested per API 598
9
Figure 572
300# Carbon Steel Swing Check Valve
Size 2 2-1/2 3 4 6 8 10 12 14 16 18 20 24Port 2.01 2.52 2.99 4.02 5.98 7.99 10.00 12.01 13.27 15.24 17.01 19.02 22.99
L 10.51 11.50 12.52 14.02 17.48 20.98 24.49 27.99 32.99 34.02 38.50 40.00 52.99H 5.91 6.57 7.09 9.92 11.85 14.17 16.85 19.33 23.03 24.21 25.31 26.81 27.95
Flan
ge D
imen
sions F 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06
ØG 6.50 7.48 8.27 10.00 12.52 15.00 17.52 20.51 22.99 25.51 27.99 30.51 35.98ØI 3.62 4.12 5.00 6.19 8.50 10.62 12.75 15.00 16.26 18.50 21.00 23.00 27.25ØJ 5.00 5.87 6.63 7.87 10.63 12.99 15.26 17.76 20.26 22.50 24.74 27.01 32.01T 0.91 1.00 1.14 1.26 1.46 1.65 1.89 2.01 2.13 2.28 2.40 2.52 2.76M 8 8 8 8 12 12 16 16 20 20 24 24 24
ØN 0.75 0.87 0.87 0.87 0.87 0.98 1.14 1.26 1.26 1.38 1.38 1.38 1.61Wt. (lbs.) 46 60 64 93 163 238 657 928 1,499 1,852 1,797 2,207 3,417
Dimensions (inches) & Weights (lbs)
Standard MaterialsNo. Part Name Material1 Body ASTM A216 Gr. WCB2 Plug Carbon Steel3 Plug Seal Carbon Steel4 Disc ASTM A216 WCB + 13%Cr
Faced7 Disc Nut Stainless Steel8 Disc Washer Stainless Steel9 Bonnet ASTM A216 Gr. WCB11 Body Seal 304+Graphite, Spiral Wound12 Seat Ring ASTM A105 + STL#6 Faced20 Rivet SS30425 Names Plate SS30435 Body Bolt ASTM A193 Gr. B737 Bolt Nut ASTM A194 Gr. 2H40 Eye Bolt ASTM A29 1035 (4" & Larger)48 Hinge Pin ASTM A276 Type 410
48-1 Split Pin ASTM A276 Type 41063 Hinge ASTM A216 Gr. WCB
NOTES:Design per API 600Pressure/Temperature Rating per ANSI B16.34Flange Dimensions per ANSI B16.5Face to Face Dimensions per ANSI B16.10Pressure Tested per API 598
10
Figure 451A
150# Stainless Steel OS&Y Gate Valve
Dimensions (inches) & Weights (lbs)
No. Part Name Material1 Body ASTM A351-CF8M2 Disc3 Stem ASTM A276-3164 Nut ASTM A194-85 Bolt ASTM A193-B86 Body Seal PTFE7 Bonnet ASTM A351-CF8M8 Packing PTFE9 Hinge Pin AISI 304 10 Eye Bolt11 Eye Nut ASTM A194-812 Gland Flange AISI 30413 Stem Nut BRONZE14 Handle Wheel ASTM A536 Gr.60-40-1815 Handle Nut
AISI 304
16 Nut17 Nipple18 Socket Set Screws19 Gland
NOTES:CF8M Seat is Integral to BodyInvestment Cast Body up to 8”Design per API 603Pressure/Temperature Rating per ANSI B16.34Flange Dimensions per ANSI B16.5Face to Face Dimensions per ANSI B16.10Pressure Tested per API 598
Standard Materials
Size 2 2-1/2 3 4 6 8 10 12d 2.01 2.52 3.15 4.02 5.98 7.99 10.00 12.01L 7.01 7.48 7.99 9.02 10.51 11.50 12.99 14.02H 11.89 12.44 14.72 17.36 21.18 28.50 43.98 52.56W 7.87 7.87 9.84 9.84 11.81 13.78 15.75 17.72
Flan
ge D
imen
sions f 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08
D 5.91 7.09 7.48 9.06 11.02 13.58 15.94 19.00G 3.63 4.13 5.00 6.19 8.50 10.63 12.70 15.00C 4.75 5.50 6.00 7.50 9.50 11.75 14.25 17.00T 0.64 0.70 0.77 0.96 1.02 1.14 1.20 1.27N 4.00 4.00 4.00 8.00 8.00 8.00 12.00 12.00M 0.75 0.75 0.75 0.75 0.87 0.89 1.00 1.00
Wt. (lbs.) 29.3 35.7 48.5 83.8 127.9 191.8 317.5 469.6
11
Figure 452A
300# Stainless Steel OS&Y Gate Valve
Dimensions (inches) & Weights (lbs)
Standard MaterialsNo. Part Name Material1 Body ASTM A351-CF8M2 Disc3 Stem ASTM A276-3164 Nut ASTM A194-85 Bolt ASTM A193-B86 Body Seal PTFE7 Bonnet ASTM A351-CF8M8 Packing PTFE9 Hinge Pin AISI 304 10 Eye Bolt11 Eye Nut ASTM A194-812 Gland Flange AISI 30413 Stem Nut BRASS14 Handle Wheel ASTM A536 Gr.60-40-1815 Handle Nut
AISI 304
16 Gland Nut17 Nipple18 Socket Set Screws19 Gland Ring
NOTES:CF8M Seat is Integral to BodyInvestment Cast Body up to 8”Design per API 603Pressure/Temperature Rating per ANSI B16.34Flange Dimensions per ANSI B16.5Face to Face Dimensions per ANSI B16.10Pressure Tested per API 598
Size 2 2-1/2 3 4 6 8d 2.01 2.52 3.15 4.02 5.98 7.99L 8.50 9.49 11.14 12.01 15.87 16.50H 12.72 14.57 15.98 19.25 24.76 30.71W 9.84 9.84 11.81 11.81 15.75 17.72
Flan
ge D
imen
sions f 0.08 0.08 0.08 0.08 0.08 0.08
D 6.50 7.48 8.27 10.04 12.60 14.96G 3.63 4.13 5.00 6.19 8.50 10.63C 5.00 5.87 6.63 7.87 14.56 13.00T 0.89 1.02 1.14 1.27 1.46 1.64N 8.00 8.00 8.00 8.00 12.00 12.00M 0.75 0.88 0.88 0.88 0.88 0.88
Wt. (lbs.) 46.1 56.0 84.9 142.4 253.5 377.0
12
Figure 461A
150# Stainless Steel Globe Valve
Dimensions (inches) & Weights (lbs)
Standard MaterialsNo. Part Name Material1 Body
ASTM A351-CF8M2 Disc3 Disc Cover4 Stem ASTM A276-3165 Body Seal PTFE6 Bonnet ASTM A351-CF8M7 Packing PTFE8 Bolt ASTM A193-B8 9 Hinge Pin AISI 30410 Gland Ring11 Gland ASTM A351-CF812 Nut AISI 30413 Eye Bolt14 Yoke Sleeve Bronze15 Name Plate AISI 30416 Nut17 Hand Wheel ASTM A536 Gr.60-40-1818 Spring Washer AISI 304
NOTES:CF8M Seat is Integral to BodyInvestment Cast Body up to 8”Design per API 603Pressure/Temperature Rating per ANSI B16.34Flange Dimensions per ANSI B16.5Face to Face Dimensions per ANSI B16.10Pressure Tested per API 598
Size 2 3 4 6d 1.97 3.15 3.94 5.91L 7.99 9.49 11.50 15.98H 10.19 13.20 15.33 21.54W 7.87 9.84 9.84 13.78
Flan
ge D
imen
sions f 0.06 0.06 0.06 0.06
D 5.91 7.48 9.06 11.02G 3.63 5.00 6.19 8.50C 4.75 6.00 7.50 9.50T 0.63 0.75 0.94 1.00N 4.00 4.00 8.00 8.00M 0.75 0.75 0.75 0.89
Wt. (lbs.) 23.4 45.9 68.3 137.1
13
Figure 462A
300# Stainless Steel Globe Valve
Size 2 2-1/2 3 4 6 8d 1.97 2.56 3.15 3.94 5.91 7.87L 10.51 11.50 12.52 14.02 17.48 22.01H 12.91 13.90 14.41 17.44 23.86 28.23W 9.84 9.84 11.81 12.60 17.72 19.69
Flan
ge D
imen
sions f 0.08 0.08 0.08 0.08 0.08 0.08D 6.50 7.48 8.27 10.04 12.60 14.96G 3.63 4.13 5.00 6.19 8.50 10.63C 5.00 5.87 6.63 7.87 10.63 13.00T 0.89 1.02 1.14 1.27 1.46 1.64N 8.00 8.00 8.00 8.00 12.00 12.00M 0.75 0.88 0.88 0.88 0.88 1.00
Wt. (lbs.) 48.1 63.7 81.6 125.0 242.1 410.1
Dimensions (inches) & Weights (lbs)
No. Part Name Material1 Body
ASTM A351-CF8M2 Disc3 Disc Cover4 Stem ASTM A276-3165 Gasket PTFE6 Bonnet ASTM A351-CF8M7 Packing PTFE8 Gland Bolt ASTM A193-B89 Hinge Pin AISI 30410 Gland Ring11 Gland Flange ASTM A351-CF8M12 Nut ASTM A194-813 Yoke Sleeve BRASS14 Nut AISI 30415 Hand Wheel ASTM A536 Gr.60-40-1816 Stud ASTM A193-B817 Nut ASTM A194-8
NOTES:CF8M Seat is Integral to Body Investment Cast Body up to 8" Design per API 603 Pressure/Temperature Rating per ANSI B16.34 Flange Dimensions per ANSI B16.5 Face to Face Dimensions per ANSI B16.10 Pressure Tested per API 598
Standard Materials
14
Figure 471A
150# Stainless Steel Swing Check Valve
Size 1-1/2 2 2-1/2 3 4 6 8 10 12d 1.57 1.97 2.56 3.15 3.94 5.91 7.87 9.84 11.81L 6.50 7.99 8.50 9.49 11.50 14.02 19.49 24.49 27.48H 3.11 3.88 4.55 5.79 6.57 8.15 9.33 13.78 13.56
Flan
ge D
imen
sions f 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08
D 4.92 5.91 7.09 7.48 9.06 11.02 13.58 15.94 19.09G 2.87 3.63 4.13 5.00 6.19 8.50 10.63 12.75 15.00C 3.87 4.75 5.50 6.00 7.50 9.50 11.75 14.25 17.00T 0.56 0.56 0.63 0.69 0.88 0.94 1.06 1.13 1.19N 4.00 4.00 4.00 4.00 8.00 8.00 8.00 12.00 12.00M 0.63 0.75 0.75 0.75 0.88 0.94 0.88 1.00 1.00
Wt. (lbs.) 10.4 17.2 25.6 35.9 62.4 103.6 167.6 295.9 430.8
Dimensions (inches) & Weights (lbs)
No. Part Name Material1 Body
ASTM A351-CF8M2 Bonnet3 Disc4 Hinge5 Flat Washer AISI 3166 Nut7 Body Seal PTFE8 Spring Washer AISI 304 9 Bolt
10 PinAISI 31611 Socket Hexagon
ScrewNOTES:CF8M Seat is Integral to BodyInvestment Cast Body up to 8”Design per API 603Pressure/Temperature Rating per ANSI B16.34Flange Dimensions per ANSI B16.5Face to Face Dimensions per ANSI B16.10Pressure Tested per API 598
Standard Materials
15
Figure 472A
300# Stainless Steel Swing Check Valve
Size 2 3 4 6d 1.97 3.15 3.94 5.91L 10.51 12.52 14.02 17.48H 5.08 6.46 6.97 9.09
Flan
ge D
imen
sions f 0.08 0.08 0.08 0.08
D 6.50 8.27 10.04 12.60G 3.63 5.00 6.19 8.50C 5.00 6.63 7.87 10.63T 0.81 1.06 1.19 1.38N 8.00 8.00 8.00 12.00M 0.75 0.88 0.88 0.88
Wt. (lbs.) 31.5 55.8 101.4 177.9
Dimensions (inches) & Weights (lbs)
No. Part Name Material1 Body
ASTM A351-CF8M2 Bonnet3 Disc4 Hinge5 Flat Washer AISI 3166 Nut7 Body Seal PTFE8 Nut ASTM A194-89 Stud ASTM A193-B8
10 PinAISI 31611 Socket Hexagon
ScrewNOTES:CF8M Seat is Integral to BodyInvestment Cast Body up to 8”Design per API 603Pressure/Temperature Rating per ANSI B16.34Flange Dimensions per ANSI B16.5Face to Face Dimensions per ANSI B16.10Pressure Tested per API 598
Standard Materials
CAST STEEL FLANGEDGATE, GLOBE, & CHECK VALVES
DOC: FNWFGGC05 Ver. 3/2012© 2012 - FNW. All rights reserved.The FNW logo is a trademark of Ferguson Enterprises, Inc., PL Sourcing, PO Box 2778, Newport News, VA 23609
The contents of this publication are presented for information purposes only, and while effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, expressed or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and conditions, which are available on request. We reserve the right to modify or improve the designs or specifications of our products at any time without notice. Always verify that you have the most recent product specifications or other documentation prior to the installation of these products.