cast iron body with ductile iron nickel plated … · technical data 4 5 6 7 9 10 8 seat lock pin...
TRANSCRIPT
WAFER TYPE BUTTERFLY VALVE SERIES ACD(PINLESS TYPE)
CAST IRON BODY WITH DUCTILE IRON NICKEL PLATED DISC
The new body neck with octagon shape design offers esthetic appearance, strength and compatible flange connection to international standards. Its top flange is designed to ISO5211 for the direct mounting of gear operator or actuators which eliminate the cost of mounting bracket. The one piece design body provides outstanding protection against particle entrapment and bacterial growth. The body is epoxy coated for better resistant against abrasion and corrosion. AUTOMA offers various materials for the valves seat and disc to meet the various requirements of customers. The fine finishing of seat surfaces and the polished edge of disc give good sealing and reduction in operating torque. The upper and lower shafts are well supported and properly sealed to prevent leakage. This pin less design has eliminated the potential of leak through pin hole.
Certificate Number : 8711
Your Partner In Flow Management
4567
910
8
SEAT
LOCK PIN
BUSHING
BUSHING
1
1
1
2
1
PTFE
1 ALUMINIUMALUMINIUM
NBR
RIVETNAMEPLATE
2
SUS 416
PTFE
UPPER STEMSUP 6
1
12
11121314
HALF RINGRETAINER RING
2
15 LOCKABLE HANDLE 1 CARBON STEEL STAMPING W/EPOXY COATING
NBR
NBR
16171819
INDICATOR 1 CARBON STEEL STAMPING W/EPOXY COATING
HEX BOLT
2
SUS 304WASHER
2
2
HEX NUT SUS 304SUS 304
20 2 SUS 304
SPRING WASHER
SPRING STEEL
Technical Data
`O´ RING
SUS 416
LOWER `O´ RING
32
LOWER STEM 1 SUS 4161DISC DUCTILE IRON NICKEL PLATED
1PART QTY. MATERIAL
BODY 1 CAST IRONNo.
Material
Standard:
Design Standard : BS EN593
Face to Face : BS EN558-1
Flange Connection : EN1092-1 PN10/16 JIS B2210 10K
: DIN 2501 PN10/16 ANSI B16 125/150
: AS 2129 TABLE E
Top Flange : ISO 5211
Test Standard : BS EN12266-1 / API 598
PITCHCIRCLE DIAMETER
Working Temperature
-10 ~ 80 -15 ~ 140 -20 ~ 150 -20 ~ 180 -50 ~ 200
NBR EPDM VITON PTFE SILICONESeat Material
Temperature °C
Pressure Test
1.0 MPa 1.6 MPa 10K ANSI 125 ANSI 150
Seal 1.1 MPa 1.76 MPa 1.54 MPa 1.52 MPa 2.2 MPa
Body 1.5 MPa 2.4 MPa 2.1 MPa 2.1 MPa 3.0 MPa
SIZE
Hydrostatic Test
1 1/2” - 20”
Working Pressure
2.1156 802.5
2.9
4.25.97.2
12.2
18.3
27.8
89
95
114127139
175
203
242
162
170
185207216
256
248
280
64.5
78.8
104.3123.3156.0
202.5
301.6
DNB C
In.Cv
WT.A
(KG)
65
80
100125150
200
300
6
8
10250
3
45
12
50 2 52.92 1/2
a°
45.00
45.0022.50
22.5022.5015.00
15.0011.25
ØD2ØD1 ØE1
5050
50
707070
102
102
102
ØE2
77
7
101010
12
12
12
ØE3
6565
65
909090
125
125
125
ØE4
3535
35
555555
70
70
70
250.8
PN 10 PN 16
1415
22
375894
174
286
429
1517
23
4062
102
192
323
490
3155
87
140224328
572
837
1241
44.7
45.2
52.154.455.8
60.6
65.6
76.9
SIZESØD3
* TORQUE (Nm)
120.00136.13152.40
182.50212.50238.12293.00
357.00400.00
42.0
24.5
28.024.5
24.0
26.026.026.0
30.525.0
45.00
154.5027.0 22.50
296.07 22.5027.0
416.70 40.5 15.00
Dimensions in mm (ACD)
2540
11 1/2
88136 69
4432.030.0 28.8
42.6 105.60 23.0 45.005050
77
6565
3535
1113 13
111.70.814
19
Dimension included ANSI125/150, JIS10K, (EN1092-2, BS4504, DIN2501) PN10/16, AS2129 TABLE E Note : Cv = US Gallon per minutes
PTFE
1817
20
29
4875
122
226
372
558
IF PTFE SEAT ONLY WITH PN10
PTFE TEMPERATURE DEPEND ON THE LINED RUBBER
* Torque PTFE / Torque PN10&16 for Rubber Seat
©2014 Automa Valve ACD 08/14
The contents of this literature for informative purposes only. Automa is not responsible for suitability or compatibility of these products in relation to system requirement. For specific requirements, consult Automa or its distributors. Automa reserves the right to change or modify product design without prior notice.
TTS Valve Technologies Sdn. Bhd.(A Member Company of Unimech Group Berhad)
24 Jalan TS 6/9, Taman Industri Subang. 47510 Subang Jaya. Selangor Darul Ehsan. MALAYSIA
Tel : +60356218811 Fax : +60356213278
Email : [email protected] Website : www.ttsvalve.com.my
Technical Data
4567
910
8
SEAT
LOCK PIN
BUSHING
BUSHING
1
1
1
2
1
PTFE
1 ALUMINIUMALUMINIUM
NBR
RIVETNAMEPLATE
2
SUS 416PTFE
UPPER STEMSUP 6
1
12
11121314
HALF RINGRETAINER RING
2
NBR
NBR
SPRING STEEL
`O´ RING
SUS 416
LOWER `O´ RING
32
LOWER STEM 1 SUS 4161DISC DUCTILE IRON NICKEL PLATED
1PART QTY. MATERIAL
BODY 1 CAST IRONNo.
Material
Standard:
Design Standard : BS EN593
Face to Face : BS EN558-1
Flange Connection : EN1092-1 PN10/16 JIS B2210 10K
: DIN 2501 PN10/16 ANSI B16 125/150
: AS 2129 TABLE E
Top Flange : ISO 5211
Test Standard : BS EN12266-1 / API 598
Working Temperature
-10 ~ 80 -15 ~ 140 -20 ~ 150 -20 ~ 180 -50 ~ 200
NBR EPDM VITON PTFE SILICONESeat Material
Temperature °C
Pressure Test
1.0 MPa 1.6 MPa 10K ANSI 125 ANSI 150
Seal 1.1 MPa 1.76 MPa 1.54 MPa 1.52 MPa 2.2 MPa
Body 1.5 MPa 2.4 MPa 2.1 MPa 2.1 MPa 3.0 MPa
SIZE
Hydrostatic Test
1 1/2” - 20”
Working Pressure
DNB C
In.Cv
WT.A
(KG)a°ØD2ØD1 ØE1 ØE2 ØE3 ØE4
PN 10 PN 16SIZES
ØD3* TORQUE (Nm)
Dimensions in mm
350 14 368 267 75 333.5 102 12 125 70 550 625 47.41564445.0470.0476.2
25.028.032.5
11.2511.2515.00
Dimension included ANSI125/150, JIS10K, (EN1092-2, BS4504, DIN2501) PN10/16, AS2129 TABLE E Note : Cv = US Gallon per minutes
PTFE
715
©2014 Automa Valve ACD 08/14
TTS Valve Technologies Sdn. Bhd.(A Member Company of Unimech Group Berhad)
24 Jalan TS 6/9, Taman Industri Subang. 47510 Subang Jaya. Selangor Darul Ehsan. MALAYSIA
Tel : +60356218811 Fax : +60356213278
Email : [email protected] Website : www.ttsvalve.com.my
The contents of this literature for informative purposes only. Automa is not responsible for suitability or compatibility of these products in relation to system requirement. For specific requirements, consult Automa or its distributors. Automa reserves the right to change or modify product design without prior notice.
IF PTFE SEAT ONLY WITH PN10
PTFE TEMPERATURE DEPEND ON THE LINED RUBBER
* Torque PTFE / Torque PN10&16 for Rubber Seat
Technical Data
Standard:
Design Standard : BS EN593
Face to Face : BS EN558-1
Flange Connection : EN1092-1 PN10/16 JIS B2210 10K
: DIN 2501 PN10/16 ANSI B16 125/150
: AS 2129 TABLE E
Top Flange : ISO 5211
Test Standard : BS EN12266-1 / API 598
4567
910
8
SEAT
LOCK PIN
BUSHING
BUSHING
1
1
1
2
1
PTFE
1 ALUMINIUMALUMINIUM
NBR
RIVETNAMEPLATE
2
SUS 416PTFE
UPPER STEMSUP 6
1
12
11121314
HALF RINGRETAINER RING
2
NBR
NBR
SPRING STEEL
`O´ RING
SUS 416
LOWER `O´ RING
32
LOWER STEM 1 SUS 4161DISC DUCTILE IRON NICKEL PLATED
1PART QTY. MATERIAL
BODY 1 CAST IRONNo.
Material
Working Temperature
-10 ~ 80 -15 ~ 140 -20 ~ 150 -20 ~ 180 -50 ~ 200
NBR EPDM VITON PTFE SILICONESeat Material
Temperature °C
15 KEY 1 CARBON STEEL
Hydrostatic Test
Working Pressure 1.0 Mpa
Seal 1.1 MPa
Body 1.5 MPa
DNB C
In.Cv
WT.A
(KG)a°ØD2ØD1 ØE1 ØE2 ØE3 ØE4
PN 10 PN 16SIZES
ØD3* TORQUE (Nm)
400
450
16
18
500 20
400
422
480
389.6
440.5
491.6
11.25
9.00
140
140
140
18
18
18
175
175
175 100
100
100
755
1012
1350
846
1131
1431
2087
2681
3350
97.6
116.3
146.6
85.7
104.6
130.3
11.25
539.7
577.8
620.0
28.4
31.8
31.8
515(525) 11.2511.25510.0 27.0
28(31)
565.0
585.0
27.0
31.0
9.00
9.00
635.0650.0
28.0
34.0
9.00
9.00
Dimension included ANSI125/150, JIS10K, (EN1092-2, BS4504, DIN2501) PN10/16, AS2129 TABLE E Note : Cv = US Gallon per minutes
297
315
348
PTFE
982
1316
1755
Dimensions in mm
©2014 Automa Valve ACD 08/14
TTS Valve Technologies Sdn. Bhd.(A Member Company of Unimech Group Berhad)
24 Jalan TS 6/9, Taman Industri Subang. 47510 Subang Jaya. Selangor Darul Ehsan. MALAYSIA
Tel : +60356218811 Fax : +60356213278
Email : [email protected] Website : www.ttsvalve.com.my
The contents of this literature for informative purposes only. Automa is not responsible for suitability or compatibility of these products in relation to system requirement. For specific requirements, consult Automa or its distributors. Automa reserves the right to change or modify product design without prior notice.
IF PTFE SEAT ONLY WITH PN10
PTFE TEMPERATURE DEPEND ON THE LINED RUBBER
* Torque PTFE / Torque PN10&16 for Rubber Seat