carpentry 27201 commercial drawings

Performance Profile Sheet ( of 1) NCCER Training

Copyright © 2013 NCCER. Permission is granted to reproduce this page provided that copies are for local use only and that each copy contains this notice.CARPENTRY MODULE 27201 V5 PERFORMANCE PROFILE

Craft:Module:Module Title:

TRAINEE NAME:

TRAINING PROGRAM SPONSOR:

INSTRUCTOR:

Rating Levels:

Recognition:

OBJECTIVE RATING DATESTART TIME

END TIME

1

1

1

1

Using an instructor-provided schedule, identify various criteria necessary for interpretation.

Using an instructor-provided shop drawing, interpret key aspects of that drawing.

Also, list the date for testing for each task was completed.

When testing for the NCCER Training Program, be sure to record Performance testing results on Training Report Form 200, and submit the results to the Training Program Sponsor.

TASK

Locate 10 items contained in a set of commercial drawings. (The instructor will select the 10 items.)

Examine a drawing to cross-reference the accuracy of dimensions from architectural to structural drawings.

(1) Passed: performed task (2) Failed: did not perform task

Carpentry 27201Commercial Drawings

Performance Profile Sheet (Page 1 of 1) NCCER Training

Copyright © 2013 NCCER. Permission is granted to reproduce this page provided that copies are for local use only and that each copy contains this notice.CARPENTRY LEVEL TWO--MODULE 27205 V5 PERFORMANCE PROFILE


TRAINEE NAME:


INSTRUCTOR:

Rating Levels:

Recognition:


END TIME

1

2

2Demonstrate the ability to build headers (back-to-back, box, and L-header).



TASK

Estimate the amount of materials to complete an instructor-specified steel framing project.

Lay out a steel stud wall with openings to include bracing and blocking.


Carpentry27205Cold-Formed Steel Framing


Copyright © 2013 NCCER. Permission is granted to reproduce this page provided that copies are for local use only and that each copy contains this notice.CARPENTRY LEVEL TWO--MODULE 27204 PERFORMANCE PROFILE


TRAINEE NAME:


INSTRUCTOR:

Rating Levels:

Recognition:


END TIME

3

4



TASK

Install three of the most common siding types in your area.

Estimate the amount of lap or panel siding required for a structure.


Carpentry Level 2 27204 Exterior Finishing




TRAINEE NAME:


INSTRUCTOR:

Rating Levels:

Recognition:


END TIME

3

3

4 Install selected building wraps.



TASK

Install blanket insulation in a wall.

Install a vapor barrier on a wall.


Carpentry Level 227203Thermal and Moisture Protection




TRAINEE NAME:


INSTRUCTOR:

Rating Levels:

Recognition:


END TIME

4

4

4

4

Lay out, cut, and install a cricket or saddle.

Demonstrate the techniques for installing other selected types of roofing materials.



TASK

Demonstrate how to install composition shingles on a specified roof and valley.

Demonstrate the method to properly cut and install the ridge cap using composition shingles.


Carpentry Level 2 27202Roofing Applications




TRAINEE NAME:


INSTRUCTOR:

Rating Levels:

Recognition:


END TIME

5

5

5

5

Lay out and cut hinges in an instructor-selected project.

Install a door closer using the proper safety precautions.



TASK

Demonstrate the proper installation of a hollow metal frame and door using the proper safety precautions.

Install a prehung door unit or door hanging system using the proper safety precautions.


Carpentry Level 2 27208Doors and Door Hardware




TRAINEE NAME:


INSTRUCTOR:

Rating Levels:

Recognition:


END TIME

1

2

4

• Nails

• Screws

• Adhesives

Estimate material quantities for an installation.



TASK

Select the type and thickness of drywall required for an installation.

Install gypsum drywall panels on a stud wall and a ceiling using any or all of the following fastening systems:


Carpentry Level 2 27206Drywall Installation




TRAINEE NAME:


INSTRUCTOR:

Rating Levels:

Recognition:


END TIME

1

4

4 Patch damaged drywall.



TASK

State the differences between the six levels of finish established by industry standards and distinguish a finish level by observation.

Properly apply a corner bead, tape, and finish to a drywall panel.


Carpentry Level 2 27207 Drywall Finishing




TRAINEE NAME:


INSTRUCTOR:

Rating Levels:

Recognition:


END TIME

2

3

3Lay out and install a lay-in suspended ceiling system according to an instructor-supplied drawing.



TASK

Estimate the quantities of materials needed to install a lay-in suspended ceiling system in a typical room from an instructor-supplied drawing.

Establish a level line at ceiling level such as is required when installing the wall angle for a suspended ceiling.


Carpentry Level 2 27209 Suspended Ceilings




TRAINEE NAME:


INSTRUCTOR:

Rating Levels:

Recognition:


END TIME

3

3

3

3

Make a coped joint using a coping saw.

Install interior trim using a finish nailer and hand nailing methods.

• Door trim

• Window trim

• Base trim

• Ceiling trim



TASK

Make square and miter cuts to selected moldings using a hand miter box.

Make square and miter cuts to selected moldings using a power miter/compound miter saw.


Carpentry Level 227210Window, Door, Floor, and Ceiling Trim

Peformance Profile Sheet (Page 2 of 2) NCCER Training



Carpentry Level 227210Window, Door, Floor, and Ceiling Trim


END TIME

4 Make a coped joint using a coping saw.

TASK




TRAINEE NAME:


INSTRUCTOR:

Rating Levels:

Recognition:


END TIME

4



TASK

Lay out and identify various types of base and wall units following a specified layout scheme.


Carpentry Level 2 27211Cabinet Installation

carpentry 27201 commercial drawings

Documents