caroline g. l. cao, ph.d. -...

27
CAROLINE G. L. CAO, Ph.D. Wright State University 3640 Colonel Glenn Hwy. 311 Neuroscience Engineering Collaboration Dayton, OH 45435 Phone: 937-775-2185 Fax: 937-775-4694 Email: [email protected] URL: http://www.cecs.wright.edu/research/erel ACADEMIC TRAINING PhD Mechanical & Industrial Engineering University of Toronto 2002 MS Kinesiology (motor control) Simon Fraser University 1996 BS Biochemistry/Kinesiology (minor) Simon Fraser University 1990 ADDITIONAL TRAINING Technology Management Certificate, Politecnico Di Milano, Milan, Italy & Helsinki University of Technology, Helsinki, Finland – 1999 Post-Baccalaureate Diploma in Ergonomics, School of Kinesiology, Simon Fraser University, British Columbia, Canada – 1994 Certificate in Health and Fitness, School of Kinesiology, Simon Fraser University, British Columbia, Canada – 1991 LEADERSHIP TRAINING HERS (Higher Education Resource Services) Summer Institute, Bryn Mawr College – 2013 ACE Women’s Network – Ohio Annual Conference, Wright State University – 2013 ACADEMIC POSITIONS Ohio Research Scholar, Ohio Imaging Research and Innovation Network (OIRAIN) – 2012 to 2015 Professor (tenured), Department of Biomedical, Industrial & Human Factors Engineering (primary appointment); Department of Mechanical and Materials Engineering (joint appointment), Department of Surgery in the Boonshoft School of Medicine (secondary appointment), Wright State University – 2012 to present Research Associate Professor, Department of Mechanical Engineering, Tufts University – 2012 Professeur Invitée, Département Automatique/Productique, Ecole des Mines de Nantes; Chercheur Invitee, Equipe Robotique, Institut de Recherche en Communications et Cybernétique de Nantes (UMR CNRS 6597), Nantes, France – 2009-11 Associate Professor (tenured), Department of Mechanical Engineering (primary appointment), Biomedical Engineering (adjunct appointment), Tufts University – 2008-11 Visiting Assistant Professor, Departments of Anaesthesiology, Biomedical Informatics, Surgical Sciences, Vanderbilt University Medical Center, Nashville, TN – 2005-06 Adjunct Assistant Professor, Department of Biomedical Engineering, Tufts University – 2002-08 Assistant Professor, Department of Mechanical Engineering, Tufts University – 2001-08 Director, Human Factors Program, School of Engineering, Tufts University – 2001-11 Research Associate, Department of Mechanical Engineering, Tufts University – 2001 Lecturer, Department of Mechanical Engineering, Tufts University – 2001 Research Project Coordinator, School of Kinesiology, Simon Fraser University, Canada – 1996- 97

Upload: others

Post on 27-Jan-2020

3 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: CAROLINE G. L. CAO, Ph.D. - people.wright.edupeople.wright.edu/sites/people.wright.edu/files/user-uploads/curriculum... · Caroline G.L. Cao, JAN 2016, p. 3of 27 Track co-chair, Technical

CAROLINE G. L. CAO, Ph.D.

Wright State University 3640 Colonel Glenn Hwy. 311 Neuroscience Engineering Collaboration Dayton, OH 45435

Phone: 937-775-2185 Fax: 937-775-4694 Email: [email protected] URL: http://www.cecs.wright.edu/research/erel

ACADEMIC TRAINING PhD Mechanical & Industrial Engineering University of Toronto 2002 MS Kinesiology (motor control) Simon Fraser University 1996 BS Biochemistry/Kinesiology (minor) Simon Fraser University 1990 ADDITIONAL TRAINING Technology Management Certificate, Politecnico Di Milano, Milan, Italy & Helsinki University of

Technology, Helsinki, Finland – 1999 Post-Baccalaureate Diploma in Ergonomics, School of Kinesiology, Simon Fraser University,

British Columbia, Canada – 1994 Certificate in Health and Fitness, School of Kinesiology, Simon Fraser University, British

Columbia, Canada – 1991 LEADERSHIP TRAINING HERS (Higher Education Resource Services) Summer Institute, Bryn Mawr College – 2013 ACE Women’s Network – Ohio Annual Conference, Wright State University – 2013 ACADEMIC POSITIONS Ohio Research Scholar, Ohio Imaging Research and Innovation Network (OIRAIN) – 2012 to

2015 Professor (tenured), Department of Biomedical, Industrial & Human Factors Engineering

(primary appointment); Department of Mechanical and Materials Engineering (joint appointment), Department of Surgery in the Boonshoft School of Medicine (secondary appointment), Wright State University – 2012 to present

Research Associate Professor, Department of Mechanical Engineering, Tufts University – 2012 Professeur Invitée, Département Automatique/Productique, Ecole des Mines de Nantes;

Chercheur Invitee, Equipe Robotique, Institut de Recherche en Communications et Cybernétique de Nantes (UMR CNRS 6597), Nantes, France – 2009-11

Associate Professor (tenured), Department of Mechanical Engineering (primary appointment), Biomedical Engineering (adjunct appointment), Tufts University – 2008-11

Visiting Assistant Professor, Departments of Anaesthesiology, Biomedical Informatics, Surgical Sciences, Vanderbilt University Medical Center, Nashville, TN – 2005-06

Adjunct Assistant Professor, Department of Biomedical Engineering, Tufts University – 2002-08 Assistant Professor, Department of Mechanical Engineering, Tufts University – 2001-08 Director, Human Factors Program, School of Engineering, Tufts University – 2001-11 Research Associate, Department of Mechanical Engineering, Tufts University – 2001 Lecturer, Department of Mechanical Engineering, Tufts University – 2001 Research Project Coordinator, School of Kinesiology, Simon Fraser University, Canada – 1996-

97

Page 2: CAROLINE G. L. CAO, Ph.D. - people.wright.edupeople.wright.edu/sites/people.wright.edu/files/user-uploads/curriculum... · Caroline G.L. Cao, JAN 2016, p. 3of 27 Track co-chair, Technical

Caroline G.L. Cao, JAN 2016, p. 2 of 27

HONORS AND AWARDS Distinguished Visiting Scientist, Australian e-Health Research Centre, The Commonwealth

Scientific and Industrial Research Organisation (CSIRO), Brisbane, Australia – 2013 Ohio Research Scholar, Ohio Imaging Research and Innovation Network (OIRAIN) – 2012-2015 Chaire Régionale de Chercheur Étranger de la Région Pays de la Loire (Research Chair of

Loire Region), 2009-2011 Mellon Foundation Research Grant, Tufts University – 2006 NSF CAREER Award, National Science Foundation – 2003 Chapanis Best Student Paper Award, Finalist, Human Factors and Ergonomics Society – 2001 Claudette MacKay-Lassonde Scholarship (Women in Engineering), U of T Nominee, Canadian

Engineering Memorial Foundation - 2000 Ontario Graduate Scholarship, University of Toronto – 1999-2001 University of Toronto Graduate Fellowship - 1997-99 Gordon Diewert Fellowship, SFU - 1997 (declined) SFU Graduate Fellowship, SFU - 1997 (declined) Gordon M. Shrum Scholarship, SFU - 1985-1988 MacKenzie King Entrance Scholarship, UBC - 1985 (declined) Vancouver Citizenship Award - 1985 BC Scholar - 1985 MEDIA COVERAGE 1. Optical Device Offers Less Painful Colonoscopy. Hospimedica.com, May 9, 2011 (http://www.hospimedica.com/surgical_techniques/articles/294734898/optical_device_offers_less_painful_colonoscopy.html) 2. A Less Painful Colonoscopy. Sciencedaily.com, April 28, 2011 (http://www.sciencedaily.com/releases/2011/04/110427091953.htm?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+sciencedaily+%28ScienceDaily%3A+Latest+Science+News%29&utm_content=My+Yahoo) 3. The Grabbiest Lab in Boston. Discovery.com, June 6, 2008 (http://news.discovery.com/tech/videos/tech-the-grabbiest-lab-in-boston.htm) PROFESSIONAL SOCIETY SERVICE AND ACTIVITIES Member, Ohio Order of Engineers – 2013 to present Associate Editor, IEEE Transactions on Human-Machine Systems (formerly SMC, Part A:

Systems and Humans) – 2012 to present Associate Editor, Journal of Advances in Human-Computer Interaction – 2007 to present Associate Editor, IEEE Transactions on Systems, Man and Cybernetics, Part A: Systems and

Humans) – 2008-12 Member, Human Factors and Ergonomics Society (HFES) – 1998 to present

Chair, Committee of Technical Groups (COTG) – 2012-13 Chair, COTG Budget and Finance Committee – 2011 Chair, Chapanis Student Paper Award Committee – 2007-14 Chair, Health Care Technical Group, HFES – 2006-08 Chair, Health Care Technical Group, Technical Program – 2004-06

Member, Society of American Gastrointestinal and Endoscopic Surgeons (SAGES) – 2006 to present

SAGES Committees: Technology; Fundamentals of Laparoscopic Surgery – 2011-present

Member, American Society of Mechanical Engineers (ASME) – 2003 to present

Page 3: CAROLINE G. L. CAO, Ph.D. - people.wright.edupeople.wright.edu/sites/people.wright.edu/files/user-uploads/curriculum... · Caroline G.L. Cao, JAN 2016, p. 3of 27 Track co-chair, Technical

Caroline G.L. Cao, JAN 2016, p. 3 of 27

Track co-chair, Technical programme committee, ASME ESDA 2012, 11th biennial conference on engineering systems design and analysis, 2-4 July 2012, Nantes, France

Member, IEEE – 2003 to present Chair, Human-Computer Interaction Technical Committee, SMC, 2015-present Board of Directors, Human Factors and Ergonomics Society, New England Chapter – 2002-05 Member, North American Society for the Psychology of Sport and Physical Activity (NASPSPA)

– 1993-2006 Member, Societe Canadienne D'Apprentissage Psychomotor et de Psychologie du Sport

(SCAPPS) – 1993-96 Reviewer of scientific journals:

Applied Ergonomics ACM Transactions on Computer-Human Interaction Behaviour & Information Technology British Medical Journal – Quality and Safety in Health Care Human Factors IEEE Transactions on Systems, Man, and Cybernetics – Part A: Systems and Humans IEEE Transactions on Haptics Journal of Applied Research in Memory and Cognition Journal of Cognitive Engineering and Decision Making Surgical Endoscopy Surgical Innovation

Reviewer for funding agencies: French National Research Agency (ANR) Natural Sciences and Engineering Research Council of Canada (NSERC) National Science Foundation (NSF) National Institute of Health (NIH) – SBIB, NIBIB, SBIR Technology Foundation STW (Netherlands funding agency for academic research in applied sciences) The US Military (Army Medical Research Acquisition Activity (USAMRAA))

Reviewer for technical conferences: Human Factors and Ergonomics Society Conference technical sessions Design of Medical Devices (DMD)

Reviewer for publishers: CRC Press, Taylor & Francis Lawrence Erlbaum Associates Publishers

Consultant for: St. Jude Medical, Inc. Charles River Analytics, Inc. Cambridge Health Alliance Hospital

UNIVERSITY COMMITTEE SERVICE AND ACTIVITIES Wright State University (WSU) Professor at Large (elected), University Tenure & Promotion Committee, 2015-2016 Senator (elected), Faculty Senate, 2014-2016 Chair of ad hoc committee for graduate student success, 2014-15 Member, ad hoc Select Committee on Research Initiatives at WSU, 2015-16 Engineering Faculty Representative (elected), Research Council, 2013-2015 Co-Chair, Advisory Council for the WSU STEMS Mentoring Circles, 2014-present Faculty Advisor, Engineers Without Borders, Wright State University Chapter, 2014-present Faculty Advisor, Postdoctoral Association, Wright State University Chapter, 2012-present Member, Women in Science Giving Circle, 2013-present

Page 4: CAROLINE G. L. CAO, Ph.D. - people.wright.edupeople.wright.edu/sites/people.wright.edu/files/user-uploads/curriculum... · Caroline G.L. Cao, JAN 2016, p. 3of 27 Track co-chair, Technical

Caroline G.L. Cao, JAN 2016, p. 4 of 27

College of Engineering and Computer Science, WSU Steering Committee (elected), 2015-2017 Faculty Development Committee (elected), 2013-16 Graduate Studies Committee, 2012-14 Focus Area Chair (Industrial and Human Systems) (elected), PhD in Engineering Program

Affairs Committee, 2013-15 Dean’s Recruitment Fellow, 2013-2015 Department of Biomedical, Industrial and Human Factors Engineering, WSU Faculty advisor, Student Chapter of Human Factors and Ergonomics Society, 2012-present Biomedical Engineering Programme Committee, 2012-present Industrial & Human Factors Engineering Programme Committee, 2012-present Search Committee, Imaging Scholar Search, 2013-15 Tufts University University Committee Member, Committee on Committees, 2011 Member, Search Committee for Director of Tisch Library, 2010-2011 Member, Academic Awards Committee, 2010-2011 Member, Institutional Review Board, 2002-2004 Chair, Academic Standing Committee, 2003-2009 Research Director, Tufts Medical Centre for Human Factors and Surgical Skills Research, 2003-

2011 School of Engineering, Tufts University Director, Human Factors Program, 2001-2011 Director, Usability Laboratory, 2001-2011 Faculty advisor, Student Chapter of Human Factors and Ergonomics Society, 2001-2011 Faculty advisor, Human-Computer Interaction Certificate Program, 2001-2011 Faculty advisor, CSEMS scholars program, 2002-2009 Faculty advisor, Robotics Academy, 2002-2006 Member, Graduate Studies Committee - 2001-2011 Department of Mechanical Engineering, Tufts University Member, Search Committee for Chair of Department of Mechanical Engineering, 2010-2011 Chair, Graduate Curriculum Committee, 2007-2009 Chair, Graduate Program Committee, 2008-2009 Advisor, undergraduate and graduate students in mechanical engineering, human factors

engineering and engineering psychology, 2001-2011 TEACHING ACTIVITIES Wright State University BME/IHE 7370 Human Factors in Medical Devices (course originator) IHE/ISE 6300/4300 Fundamentals of Human Factors Engineering Tufts University ENP 061 Introduction to Human Factors and Ergonomics ENP 162 Human-Machine Systems Design ENP 163 Analytical Methods in Human Factors Engineering (course originator) ENP 120 Human Systems Design (Capstone course) ME 152 Biomechanics (course originator)

Page 5: CAROLINE G. L. CAO, Ph.D. - people.wright.edupeople.wright.edu/sites/people.wright.edu/files/user-uploads/curriculum... · Caroline G.L. Cao, JAN 2016, p. 3of 27 Track co-chair, Technical

Caroline G.L. Cao, JAN 2016, p. 5 of 27

ENP 210 Human Factors in Medical Systems (course originator) MENTORING ACTIVITIES Co-Chair, Advisory Council for the WSU STEMS Mentoring Circles, 2014-present Faculty Advisor, Engineers Without Borders, WSU Student Chapter, 2014-present Faculty Advisor, Wright State University Postdoc Association, 2012-present Supervisor of Post-doctoral Associates and Researchers (22 total): 1. Alyssa Lungarini, MS (2015-present). Research Assistant. Cambridge Health Alliance

Hospital. 2. Ali Linsk, MD (2014-present). Research Fellow. Cambridge Health Alliance Hospital. 3. Jinling Wang, PhD (2013-present). Post-doc Associate, Wright State University. 4. Jeff Flinn, MS (2012-2015). Research assistant, Wright State University. 5. Akole Mensah (2014-present). Biomedical Engineering undergrad student research

assistant. Wright State University. 6. Katherine Babbitt, BS (2014-present). Medical student research assistant. Wright State

University. 7. Miller, Stephanie, BS (2014). Analysis of students’ eye gaze during surgical skills training.

NIH STREAMS Fellow. Wright State University. 8. Riyad Tayim, MS (2013-2014). Medical student research assistant. Wright State University. 9. Kelly Manser, BA (2013-2014). Research assistant, Cambridge Health Alliance Hospital. 10. Mary Runkle (2013-2014). Medical student research assistant. Wright State University. 11. Winnie Chen (2013-2014). Research Associate, Cambridge Health Alliance Hospital. 12. David Wood (2013-2014). Undergrad research assistant, Wright State University. 13. Natalie Pyatka, B.S. (2012-2015). Medical student research assistant, Wright State

University. 14. Amie Miller, M.D. (2012-2014). Surgical Research Fellow, Wright State University. 15. Alexandra Geada (2013). Research Associate, Cambridge Health Alliance Hospital. 16. Helena Mentis, Ph.D. (2012-2013). Post-doc Associate, Cambridge Health Alliance Hospital. 17. Manuel Simoes, Ph.D. (2012-2013). Post-doc Associate, Wright State University. 18. Tzu-Ting Sun, B.S. (2012). Research assistant, Wright State University. 19. Jacob Brewer, B.S. (2012-2013). NIH GRAD-PREP Fellow, Wright State University. 20. Amine Chellali, Ph.D. (2011-2013). Post-doc Associate, Tufts University/Cambridge Health

Alliance Hospital. 21. Likun Zhang, M.S. (2010-2011). Research Associate, Tufts University. 22. Hua Xing, Ph.D. (2007). Post-doc Associate, Tufts University. Supervisor of Graduate Theses (34 total): 1. Maddah, M. (in progress). Ph.D. in Engineering, Wright State University. Expected May

2017. 2. Mensah, A. (in progress). Master’s in Biomedical Engineering, Wright State University.

Expected May 2017. 3. Diller, E. (in progress). Master’s in Biomedical Engineering, Wright State University.

Expected December 2015. 4. Rinehart, B. (in progress). Master’s in Biomedical Engineering, Wright State University.

Expected December 2015. 5. Spindler, D. (in progress). Master’s in Human Factors Engineering, Wright State University.

Expected December 2015. 6. Hoskins, R. (2015). Use of vibrotactile feedback and stochastic resonance for improving

laparoscopic surgery performance. MS thesis in Human Factors Engineering, Wright State University. May 2015.

7. Lou, Y. (2014). MS in Human Factors Engineering, Wright State University, August 2014.

Page 6: CAROLINE G. L. CAO, Ph.D. - people.wright.edupeople.wright.edu/sites/people.wright.edu/files/user-uploads/curriculum... · Caroline G.L. Cao, JAN 2016, p. 3of 27 Track co-chair, Technical

Caroline G.L. Cao, JAN 2016, p. 6 of 27

8. Banez, J. (2012). Port-placement optimisation in robotic surgery. MS thesis in Human Factors Engineering, Tufts University, August 2012.

9. Cunningham, S. (2012). Team communication in robotic surgery. MS thesis in Human Factors Engineering, Tufts University, May 2012.

10. Roth, E. (2010). European Masters on Advanced Robotics (EMARO), Institut de Recherche en Communications et Cybernétique de Nantes, Nantes, France, August 2011.

11. Wong, C. (2010). Psychophysics test apparatus for haptics. European Masters on Advanced Robotics (EMARO), Institut de Recherche en Communications et Cybernétique de Nantes, Nantes, France, August 2010.

12. Takac, B. (2010). Haptic communication. European Masters on Advanced Robotics (EMARO), Institut de Recherche en Communications et Cybernétique de Nantes, Nantes, France, August 2010.

13. Zhou, Mi (2010). Haptics in laparoscopic remote manipulation. Ph.D. dissertation in Mechanical Engineering, Tufts University, May 2010.

14. Zhang, Likun (2010). Visuomotor congruency in laparoscopic surgery. M.Sc. thesis in Human Factors, Tufts University, May 2010.

15. Eisenstein, Jessica (2010). Development and preliminary evaluation of a fibre optic bend sensor using CMOS imaging technique. M.Sc. thesis in Mechanical Engineering. Tufts University, May 2010.

16. Gavalis, Robb (2009). Multi-axis optical-fiber bend sensor for colonoscopy guidance. Tufts University, May 2009.

17. Bell, Audrey (2008). Evaluation of rotational frequency modulation for force feedback delivery in laparoscopic tissue differentiation tasks. M.Sc. thesis in Mechanical Engineering, Tufts University, November 2008.

18. Nodine, E. (2008). Detection of drowsy drivers through driver performance indicators. M.Sc. thesis in Human Factors, Tufts University, August 2008.

19. Dill, Meredith (2007). Treatment of optical fibres for curvature measurements. M.Sc. thesis in Human Factors, Tufts University.

20. Slutsky, Fran (2007). Confusion in auditory alarms in everyday products. M.Sc. thesis in Human Factors, Tufts University.

21. Schoonmaker, Ryan (2006). Vibrotactile stimulation and force feedback in laparoscopic surgery. M.Sc. thesis in Mechanical Engineering, Tufts University, May 2006.

22. Shimotsu, Ryan (2006). Enhancing depth perception with coloured shadows. M.Sc. thesis in Biomedical Engineering, Tufts University, May 2006.

23. Goble, Jess (2005). Design of logging tool for behaviour modification. M.Sc. thesis in Human Factors, Tufts University, December 2005.

24. Huang, Brian (2005). Enhancing the layout of graphically presented browsing history with implicit spatial and temporal knowledge. M.Sc. thesis in Human Factors, Tufts University, February 2005.

25. Fletcher, Martha (2004). Assessment of cognitive loading attributed to encapsulation by headgear. M.Sc. thesis in Human Factors, Tufts University, August 2004.

26. Perreault, Jesse (2004). Effects of friction on haptic perception in simulated endoscopic environments. M.Sc. thesis in Human Factors, Tufts University, August 2004.

27. Webster, Jessica (2004). Introducing a robotic surgical system in the operation room: effects on communication flow and attentional resources. M.Sc. thesis in Human Factors, Tufts University, August 2004.

28. Scherpa, Josef (2003). The effects of texture and 3D graphic representations on human performance using touchscreen interfaces. M.Sc. thesis in Human Factors, Tufts University, August 2003.

29. Fabian, Steve (2002). Evaluation of Three Model Predictions of Alertness. M.Sc. thesis in Human Factors, Tufts University, May 2002.

Page 7: CAROLINE G. L. CAO, Ph.D. - people.wright.edupeople.wright.edu/sites/people.wright.edu/files/user-uploads/curriculum... · Caroline G.L. Cao, JAN 2016, p. 3of 27 Track co-chair, Technical

Caroline G.L. Cao, JAN 2016, p. 7 of 27

30. Rivera, Cristina (ABD). Task analysis of NOTES (natural orifice translumenal endoscopic surgery). M.Sc. thesis in Human Factors, Tufts University.

31. Hall, Jason (ABD). Analysis of fixations in team decision making in the OR. M.Sc. thesis in Human Factors, Tufts University.

32. O’Connor, Ashling (ABD). Knowledge of results in surgical skills acquisition. M.Sc. thesis in Human Factors, Tufts University.

33. Waxberg, Sara (ABD). Modelling training and success of surgical residents at Tufts-New England Medical Centre. M.Sc. thesis in Human Factors, Tufts University.

34. Friedberg, Leah (ABD). Postural stress in surgeons. M.Sc. thesis in Human Factors, Tufts University.

Supervisor of Undergrad Theses (5 total): 1. Greenwald, Daniel (2008). Haptics in MIS during levering actions. B.A. honours in

Psychology, Tufts University, May 2008. 2. Hamada, Kristi (2004). Human factors and children: Designing an interface for an

interactive kinetic sculpture. B.Sc. honours thesis in Human Factors, Tufts University, May 2004.

3. Waxberg, Sara (2004). The effects of video game experience on laparoscopic skill acquisition. B.Sc. honours thesis in Human Factors, Tufts University, May 2004.

4. Basford, Eric (2003). The application and interface of the tube-crawling robot: A human factors approach. B.Sc. honours thesis in Human Factors, Tufts University, May 2003.

5. Cades, David (2003). Target detection in robotic colonoscopy. B.A. honours thesis in Human Factors, Tufts University, May 2003.

Committee Member of Undergraduate Theses (10 total): 1. Wong, Daniel (2009). Modal specific context varies discourse self-relevance and narrative

simulations. B.A. in Psychology, Tufts University, May 2009. 2. Pergakis, Melissa (2007). Spatial reference frames in spatial memory. B.A. in Psychology,

Tufts University, May 2007. 3. Zigelbaum, Jamie (2006). B.Sc. in Human-Computer Interaction. Tufts University, May

2006. 4. Parent, Daniel P. (2003). The forensic crashworthiness analysis of the Placentia, CA rail

collision. B.Sc. honours thesis in Mechanical Engineering, Tufts University, May 2003. 5. DeLuca, Diana (2003). Robotics and education: teaching with technology. B.A. honours

thesis in Child Development and Education, Tufts University, May 2003. 6. Hacker, Laura (2003). Robotics in education: ROBOLAB and robotic technology as tools for

learning science and engineering. B.A. honours thesis in Child Development and Education, Tufts University, May 2003.

7. Nodine, Emily (2003). Kinematic design and analysis of a laparoscopic surgical assist device. B.Sc. in Mechanical Engineering, WPI, December 2003.

8. Cohen, Jonathan (2004). B.A. honours thesis in Psychology, Tufts University, May 2004. 9. Sutphen, Adeline (2004). A multidisciplinary team approach to the design and development

of an autonomous mobile robot team. B.Sc. honours thesis in Mechanical Engineering, Tufts University, May 2004.

10. Tang, Sandra (2004). RoboHunt: A study of instructional strategies and the gender differences that arise in a robotics workshop. B.A. honours thesis in Child Development and Education, Tufts University, May 2004.

Committee Member of Graduate Theses (9 total): 1. Tavakkoli, Zohreh (2013-present). TBD. M.S. in Biomedical Engineering, Wright State

University.

Page 8: CAROLINE G. L. CAO, Ph.D. - people.wright.edupeople.wright.edu/sites/people.wright.edu/files/user-uploads/curriculum... · Caroline G.L. Cao, JAN 2016, p. 3of 27 Track co-chair, Technical

Caroline G.L. Cao, JAN 2016, p. 8 of 27

2. Satya, Shiva (2012-present). Multimodal medical image registration. Ph.D. in Computer Science and Engineering, Wright State University.

3. Zhao, C. (2015). AE-SIFT: An autoencoder-based image descriptor for image matching and retrieval. PhD in Computer Science and Engineering, Wright State University, December 2015.

4. Brunye, Tad (2004). Multimedia presentations as effective tools for learning procedural assembly sequences. M.A. in Psychology, Tufts University, May 2004.

5. Spataro, Joseph E. (2004). Evaluation of surgical blade cutting forces. M.S. in Mechanical Engineering, Tufts University, August 2004.

6. Gemmill, Benjamin (2005). Design and construction of a physically controlled, online, persistent 3D world”. M.Sc. in Mechanical Engineering, Tufts University, August 2005.

7. Mason, Paul (2005). The development of Robotable: A hands-on tabletop environment to support engineering education”. M.Sc. in Human Factors, Tufts University, August 2005.

8. Bilge, Reyyan (2005). Learning nested environments from maps: Is spatial updating simultaneous?” M.A. in Psychology, Tufts University, March 2005.

9. Afram, Andrew (2005). Evaluation of semantic fisheye zooming for navigating concept maps. M.Sc. in Human Factors, Tufts University, April 2005.

Supervisor of Special Projects (42 total): 1. Mohler et al. (2015). Design and testing of senorised endovascular guidewires. Senior

Design Project, Biomedical Engineering, Wright State University. 2. Campbell et al. (2014). Force measurement in flexible endoscopy. Senior Design Project,

Biomedical Engineering, Wright State University. 3. Millar et al. (2014). ICG imaging. Senior Design Project, Biomedical Engineering, Wright

State University. 4. Allen, J., Diller, E., Merrell, T., Reinhardt, B. (2013). Instrumented glove for force

measurements in medical device manipulation. Senior Design Project, Biomedical Engineering, Wright State University.

5. Luu, D. (2013). Haptic sensation replication in contralateral limbs. Australian e-Health Research Centre, The Commonwealth Scientific and Industrial Research Organisation (CSIRO).

6. Jarusiewic, S., Iman (2012-2013). Water filtration system for third world countries. Senior Design Project, Biomedical Engineering, Wright State University.

7. Davis, E., Grosdemouge, C., Linsalata, R., Morowsky, K., Noble, J., San, C., Seng, A., Ventalon, L. (2012). International Project on Telemedicine Design and Control. Joint international project between Tufts University and Ecole des Mines de Nantes (Projet en Contexte Internationale).

8. Banez, J., Cunningham, S., Kwinn, C., Napal, V., Pham-Le, C., Six, A., Taylor-Brown, P. (2011). An innovative and collaborative approach to learning telesurgery concepts. Joint international project between Tufts University and Ecole des Mines de Nantes (Projet en Contexte Internationale).

9. Grosdemouge, C. (2010). Measuring human haptic perception thresholds. Summer Intern, Institut de Recherche en Communications et Cybernétique de Nantes (UMR CNRS 6597), Nantes, France.

10. Luu, D. (2010). Design and development of robotic arm prototype for needle insertion. Summer Intern, Ecole des Mines de Nantes, France.

11. Eyzat, L. & Ngabe, G. (2009). Fibre optics guidance automation. French International Visiting Scholars.

12. Chan, L. (2009). Endoscopic shape tracking. NSF-REU Fellow. 13. Miller, A. (2009). Dynamic laparoscopic skills simulator. NSF-REU Fellow. 14. Potts, J. (2008). Evaluation of elbow external fixators. NIH BREEM Fellow. 15. Bader, D. (2008). Design of cylindrical fixture for optical fibre bending. NIH BREEM Fellow.

Page 9: CAROLINE G. L. CAO, Ph.D. - people.wright.edupeople.wright.edu/sites/people.wright.edu/files/user-uploads/curriculum... · Caroline G.L. Cao, JAN 2016, p. 3of 27 Track co-chair, Technical

Caroline G.L. Cao, JAN 2016, p. 9 of 27

16. Greenwald, D. (2008). Haptic perception in minimally invasive surgical tasks: An investigation of tumour detection. BA Honours Thesis in Psychology, Tufts University.

17. Taylor, D., Lui, J., Chen, J., Knowles, M., LeBlanc, S. (2008). Design of 3D virtual haptic system for surgical training. COMP 190 senior project in Computer Science, Tufts University.

18. Johnston, L. & Lokhande, K. (2007). Information display in the OR. NSF-CUSP Fellows. 19. Zamarripa, N. (2007). Design of micro fixture for fibre preparation. NSF-REU Fellow. 20. Mandelupe, E. (2007). Design of next generation haptic devices for MIS. NIH

BREEM/NSF-REU Fellow. 21. Maxwell, Kyle (2007). Deformable surfaces in VR environments for MIS training. NSF-REU

Fellow. 22. Dennis, D. (2006). Generating haptic events using the Phantom. NSF-CUSP Fellow. 23. Eaton, C. (2006). Investigation of haptics in a virtual endoscopic environment. NSF-CUSP

Fellow. 24. Bell, A. (2006). Effect of magnified haptics on control of force application in MIS. NSF-REU

Fellow. 25. Johanas, J. (2006). Effect of haptics on depth perception in MIS. NSF-REU Fellow. 26. Meng, J. & Wu, D. (2005). ARMISTS: Augmented reality in MIS training system. Special

Project, CS352 Human-Computer Interaction, Computer Science, Vanderbilt University. 27. Bell, A., Johanas, J., Saide, M. (2005). Dynamic surgery simulator. Senior Design Project,

Mechanical Engineering, Tufts University. 28. Abbott, Rebecca (2005). Automation of FLS scoring for mesh-cutting task. B.Sc. in

Mechanical Engineering, Tufts University. 29. Nguen, Tuan (2005). Haptic perception in laparoscopic surgery for residents. First year

medical student. Tufts Medical School. 30. Laurel Vuong (2005). Performance metrics in surgical skills learning. First year medical

student. Tufts Medical School. 31. Kalafarski, Edward (2005). Design of dynamic task in surgical simulation. B.Sc. in

Computer Science, Tufts University. 32. Butler, Kristen (2005). Robotics Academy: Genetic Line Sorting Optimisation. Senior

Project. B.Sc. in Human Factors Engineering, Tufts University. 33. Gaulin, Mathieu (2005). Design of Learning Aids for Novice Surgeons in MIS. Special

Project. B.Sc. in Psychology, Tufts University. 34. Khawati, Nadia (2004). Analogue vs. Digital Force Displays. NSF-REU Fellow. 35. Emily Finn, Chris Papazian, Ed Schwehm, Tion Thomas, Bryan Warner. Flexible Virtual

Environment. COMP 190 Senior Design Project, Computer Science, Tufts University. 36. Kogan, Anna (2004). Visuomotor coordination in endoscopic surgery. B.Sc. in Mechanical

Engineering, Tufts University. 37. Waxberg, Sara & Park, Brian (2003). Surgical training using real and virtual models. NSF-

REU fellows. 38. Nodine, Emily (2003). Design of endoscopic camera holder. Senior Design Project,

Mechanical Engineering, WPI. 39. Iny, Mandy & Waxberg, Sara (2003). Task analysis of robotic surgery. B.Sc. in Human

Factors Engineering, Tufts University. 40. Ono, Mamiko & Chan, Melissa (2003). Navigational aid display. B.Sc. in Human Factors

Engineering, Tufts University. 41. Fisher, Jennifer & Marshall, Kate (2002). Verbal protocol analysis. B.Sc. in Human Factors

Engineering, Tufts University. 42. Dombach, M., Schrauth, A.J., Parent, D., Adrian, J., Wilson, A. (2003). Design of robotic

colonoscope. Robotics Academy, Mechanical Engineering, and Electrical Engineering and Computer Science, Tufts University.

Page 10: CAROLINE G. L. CAO, Ph.D. - people.wright.edupeople.wright.edu/sites/people.wright.edu/files/user-uploads/curriculum... · Caroline G.L. Cao, JAN 2016, p. 3of 27 Track co-chair, Technical

Caroline G.L. Cao, JAN 2016, p. 10 of 27

External Examiner of Habilitation and PhD Dissertations (4 total): 1. Giannopulu, Irini (2011). Contribution a la comprehension des representations

multimodales chez l’homme sain et chez les patients avec atteinte neuropsychologique: une perspective “life span”. L’Habilitation a Diriger des Recherches (HDR), Universite Pierre & Marie Curie – Paris 6, January 2011.

2. Chellali, Amine (2009). Etude des interactions homme-homme pour l’elaborattion du referential commun dans les environnements virtuels collaboratifs. Ph.D. in Informatique et applications (automatique et informatique appliqués), Universite de Nantes, UFR Sciences et Techniques, December 2009.

3. Poor, Michael (2008). The effects of varying levels of reality based interaction styles on a subjects ability to perform a 3D construction task. Ph.D. in Computer Science, Tufts University, 2008.

4. Christou, Georgios (2007). A knowledge-based framework for the description and evaluation of reality-based interaction. Ph.D. in Computer Science, Tufts University, 2007.

EXTRAMURAL GRANTS AWARDED 1. The CECS Student Success Scholarship Program: Leveraging Curricular Innovation in

Engineering and Computer Science Education – National Science Foundation (NSF DUE-1356518, $614,096) – Co-PI – 06/01/2014-05/31/2019

2. Development and Validation of a Virtual Airway Skill Trainer (VAST) – National Institute of Health (NHLBI 1R01HL119248-01A1, $2,962,918) – Co-I – 04/2014-03/2018 ($401,428) (Multi-institutional project with RPI and BIDMC; lead institution RPI)

3. Feasibility study of ICG imaging in cholecystectomy – WSU Research Initiation Grant ($20,000) – PI – 2013-2014

4. Development and validation of The Virtual Electrosurgical Skill Trainer (VEST) – National Institute of Health (NIBIB 1R01EB014305-01; $3,600,000) – PI – 09/2012-08/2017 ($475,053) (Multi-institutional project with RPI and BIDMC; lead institution RPI)

5. Physically Realistic Virtual Surgery (GEN2) – National Institute of Health (NIBIB R01 2R01EB005807-05A1; $3,500,000) – PI – 08/2011-07/2016 ($444,500). (Multi-institutional project with RPI and BIDMC; lead institution RPI)

6. Developing Physics-Based Virtual Simulation Technology for Natural Orifice Translumenal Endoscopic Surgery (NOTES) – National Institute of Health (NIBIB 1R01EB009362-01A2; $3,535,278) – PI – 05/2011-04/2016 ($395,125). (Multi-institutional project with RPI and BIDMC; lead institution RPI)

7. Laparoscopic Surgery Training System (LASTS) – US Office of Naval Research & TATRC (SBIR Phase II; $750,000) – co-PI – 2011-2013 ($265,082). (Lead institution Charles River Analytics, Inc.)

8. Laparoscopic Surgery Training System (LASTS) – US Office of Naval Research (SBIR Phase I; $70,000) – co-PI – 2010 ($10,000). (Lead institution Charles River Analytics)

9. Development and Validation of a Virtual Basic Laparoscopic Skill Trainer (VBLaST) – National Institute of Health (NIBIB 1R01EB10037-01; $2,160,000) – PI – 06/2010-05/2015 ($417,040). (Multi-institutional project with RPI and BIDMC; lead institution RPI)

10. Haptic Evaluation Procedure – AtlanSTIC 2009 (CNRS FR2819, France) (9,100€) – Co-PI – 2010. (PI: Dumas, Ecole des Mines de Nantes)

11. Soft Tissue Measurement and Modelling for Surgical Simulation and Visualisation – Tufts University School of Engineering Research Funding ($5,000) – PI – 2008-2009.

12. Smart Codec with Telesurgery Capability – Department of Defence Telemedicine and Advanced Technology Research Centre (SBIR Phase II; $750,000) – Participant – 2007-2009. (Lead institution Energid, Inc.)

Page 11: CAROLINE G. L. CAO, Ph.D. - people.wright.edupeople.wright.edu/sites/people.wright.edu/files/user-uploads/curriculum... · Caroline G.L. Cao, JAN 2016, p. 3of 27 Track co-chair, Technical

Caroline G.L. Cao, JAN 2016, p. 11 of 27

13. A Phase I Trial of Continuous Low-Irradiance Photodynamic Therapy for Post-Mastectomy Chest Wall Recurrences of Breast Cancer – Susan G. Komen Breast Cancer Foundation ($264,233) – co-PI – 2007-10. (Lead institution Tufts Medical Centre)

14. Role of Haptic Feedback and Cognitive Load in Laparoscopic Surgery Performance – Society of American Gastrointestinal and Endoscopic Surgeons (SAGES) Research Grant ($20,000) – PI – 2007-08.

15. Image-Guidance Research in Colonoscopy to Improve Diagnosis of IBD – Broad Foundation Medical Research Grant ($217,832) – PI – 2007-09.

16. Acquisition of a Scientific Visualization Facility – National Science Foundation ($350,000) – Senior Personnel, 2006. (PI: Boghosian)

17. The Vanderbilt Reynolds Geriatrics Centre – D.W. Reynolds Foundation ($1,999,798) – Participant, 2006-08. (PI: Powers, Vanderbilt Medical Centre)

18. Tufts-CSEMS Scholars Program – National Science Foundation – NSF Grant DUE-0631054 ($499,560) – Co-I – 2006-10. (PI: Souvaine, Tufts University)

19. Integrated Information Display for OR Team – Tufts University Faculty Research Award (Mellon), Junior Research Semester Fellowship (semester leave) – PI – 2006.

20. Human Factors Usability Laboratory at Tufts - Tufts University Academic Technology Faculty Grant ($30,000 equivalent) – PI – 2002-03.

21. Biomedical MEMS Microfabrication Facility and Biomedical Device Design, Evaluation and Usability Laboratory – Lufkin Memorial Fund ($200,000) – Primary Contributor – 2002-03.

22. Tufts-CSEMS Scholars Program – National Science Foundation – NSF Grant DUE-0220651 ($385,000) – Co-PI – 2002-06. (PI: Souvaine, Tufts University)

23. Multi-Threaded Instruction: Forming Multi-disciplinary Research Groups to Improve Undergraduate Education – National Science Foundation – NSF Grant ECC-0212046 ($372,972) – Co-PI – 2002-05. (PI: Rogers, Tufts University)

24. Soft Tissue Strength Measurement - Tufts University Faculty Research Award ($5,500) – PI – 2003.

25. Adapting to Technology in Minimally Invasive Surgery – National Science Foundation Career Award – NSF Grant IIS-0238284 ($651,361) – PI – 2003-2008.

26. Surgical Skills in Robotic Surgery - Tufts University Faculty Research Award ($5,000) – PI – 2002.

PUBLICATIONS & SCHOLARLY ACTIVITIES Patents 1. EFOST, with Lothar Lilge, Paul Milgram, Peter Wong. US Patents # 8,219,180 (issued July

10, 2012), #8,725,234 (issued May 13, 2014). 2. EFOST, also submitted in Europe, Japan, Canada, and Australia. All pending. 3. DynaMITE, submitted with Audrey Bell, Jacqueline Johanas, Matthew Saide, Gary Leisk,

Steven Schwaitzberg. PCT/US2007/020069. Pending. Refereed Journals (Total 42) 1. Hoskins, R., Wang, J., Cao, C.G.L. (2016). Use of stochastic resonance methods for

improving laparoscopic surgery performance. Surgical Endoscopy. DOI: 10.1007/s00464-015-4730-8

2. Wang, J., Chellali, A., Cao, C.G.L. (2015). Haptic communication in collaborative virtual environments. Human Factors. DOI: 10.1177/0018720815618808

3. Flinn, J., Miller, A., Pyatka, N., Brewer, J., Schneider, T., Cao, C.G.L. (2015). The effect of stress on learning in surgical skill acquisition. Medical Teacher. DOI: 10.3109/0142159X.2015.1114597

4. Demirel, D., Butler, K.L., Halic, T., Sankaranarayanan, G., Spindler, D., Cao, C.G.L., Petrusa, E., Mokina, M., Jones, D., De, S. DeMoya, M. (2015). A hierarchical task analysis

Page 12: CAROLINE G. L. CAO, Ph.D. - people.wright.edupeople.wright.edu/sites/people.wright.edu/files/user-uploads/curriculum... · Caroline G.L. Cao, JAN 2016, p. 3of 27 Track co-chair, Technical

Caroline G.L. Cao, JAN 2016, p. 12 of 27

of cricothyroidotomy procedure for a virtual airway skills trainer (VAST) simulator. American Journal of Surgery. DOI: http://dx.doi.org/10.1016/j.amjsurg.2015.08.029

5. Awtrey, C.S., Chellali, A., Schwaitzberg, S.D., De, S., Jones, D.B., Cao, C.G.L. (2015). Validation of the VBLaST: A virtual peg transfer task in gynecologic surgeons. The Journal of Minimally Invasive Gynecology, 22(7), 1271-1277. DOI: 10.1016/j.jmig.2015.07.015

6. Mentis, H., Chellali, A., Manser, K., Schwaitzberg, S., Cao, C.G.L. (2015). A systematic review of the effect of distraction on surgeon performance: Directions for operating room policy and surgical training. Surgical Endoscopy. DOI: 10.1007/s00464-015-4443-z

7. Sankaranarayanan, G. Li, B., Manser, K. Jones, S.B., Jones, D.B., Schwaitzberg, S., Cao, C.G.L., De, S. (2015). Face and Construct Validation of a Next Generation Virtual Reality (Gen2-VR©) Surgical Simulator. Surgical Endoscopy. DOI: 10.1007/s00464-015-4278-7

8. Olasky, J., Sankaranarayanan, G., Seymour, N.E., Magee, J.H., Enquobahrie, A., Lin, M.C., Aggarwal, R., Brunt, L.M., Schwaitzberg, S.D., Cao, C.G.L., De, S., Jones, D.B. (2015). Identifying Opportunities for Virtual Reality Simulation in Surgical Education; A Review of the Proceedings from the Innovation, Design, and Emerging Alliances in Surgery (IDEAS) Conference: VR Surgery, Nov 23, 2013. Surgical Innovation, 22(5), 514-521.

9. Chellali, A., Ahn, W., Sankaranarayanan, G., Flinn, J.T., Schwaitzberg, S.D., Jones, D.B., De, S., Cao, C.G.L. (2014). Preliminary evaluation of the pattern cutting and the ligating loop virtual laparoscopic trainers. Surgical Endoscopy, 29(4), 815-821. DOI: 10.1007/s00464-014-3764-7

10. Chellali, A., Schwaitzberg, S., Jones, D, Romanelli, J., Miller, A., Rattner, D., Roberts, K., Cao, C.G.L. (2014). Towards scar-free surgery: An analysis of the increasing complexity from laparoscopic surgery to NOTES. Surgical Endoscopy, 28(11), 3119-3133. DOI:10.1007/s00464-014-3565-z

11. Olasky, J., Chellali, A, Zhang, L., Sankaranarayanan, G., Cao, C.G.L. (2014). Effects of sleep hours and fatigue on performance in laparoscopic surgery simulators. Surgical Endoscopy, 28(9), 2564-2568. DOI:10.1007/s00464-014-3503-0

12. Chellali, A., Zhang, L., Sankaranarayanan, G., Cao, C.G.L. (2014). Validation of the VBLaST peg transfer task: A first step towards an alternate training standard. Surgical Endoscopy, 28(10), 2856-2862. DOI:10.1007/s00464-014-3538-2

13. Perez, R.S., Skinner, A., Weyrauch, P., Niehaus, J., Lathan, C., Schwaitzberg, S.D., Cao, C.G.L. (2013). Prevention of surgical skill decay. Military Medicine, Special Issue on Designing and Using Computer Simulations in Medical Education and Training, 178, 76-86.

14. Zhang, L., Sankaranarayanan, G., Arikatla, V., Ahn, W., Grosdemouge, C., Rideout, J., Epstein, S., De, S., Schwaitzberg, S., Jones, D., Cao, C.G.L. (2013). Characterizing the learning curve of the VBLaST (Virtual Basic Laparoscopic Skill Trainer). Surgical Endoscopy, 27(10), 3603-3615. DOI: 10.1007/s00464-013-2932-5

15. Arikatla, V.S., Sankaranarayanan, G., Ahn, W., Chellali, A., De, S., Cao, C.G.L., Hwabejire, J., DeMoya, M., Schwaitzberg, S., Jones, D.B. (2013). Face and construct validation of a virtual peg transfer simulator. Surgical Endoscopy, 27(5), 1721-1729.

16. Zhang, L., Grosdemouge, C., Sankaranarayanan, G., Anh, W., Sreekanth, A.V., De, S., Jones, D., Schwartzberg, S., Cao, C.G.L. (2012). Added value of virtual reality technology and force feedback for surgical training simulators. Work: A Journal of Prevention, Assessment and Rehabilitation, 41(0), 2288-92.

17. Cunningham, S., Chellali, A., Classe, J., Jaffre, I., Cao, C.G.L. (2013). Effects of experience and cultural differences in human-robot team interaction in robotic surgery. International Journal of Social Robotics, 5(1), 75-88. DOI: 10.1007/s12369-012-0170-y.

18. Zhang, L. & Cao, C.G.L. (2012). Effect of automatic image realignment on visuomotor coordination in laparoscopic surgery. Applied Ergonomics, 43(6), 993-1001. DOI:10.1016/j.apergo.2012.02.001.

Page 13: CAROLINE G. L. CAO, Ph.D. - people.wright.edupeople.wright.edu/sites/people.wright.edu/files/user-uploads/curriculum... · Caroline G.L. Cao, JAN 2016, p. 3of 27 Track co-chair, Technical

Caroline G.L. Cao, JAN 2016, p. 13 of 27

19. Greenwald, D., Cao, C.G.L, Bushnell, E. W. (2012). Haptic detection of artificial tumors by hand and with a tool in a MIS environment. IEEE Transactions on Haptics, 5(2), 131-138. DOI: http://doi.ieeecomputersociety.org/10.1109/TOH.2011.68.

20. Conrad, C., Konuk, Y., Werner, P., Cao, C.G.L., Warshaw, A., Rattner, D., Jones, D.B., Gee, D. (2012). A quality improvement study on avoidable stressors and countermeasures affecting surgical motor performance and learning. Annals of Surgery, 255(6), 1190.

21. Zhou, M., Tse, S., Derevianko, A., Jones, D.B., Schwaitzberg, S.D., Cao, C.G.L. (2011). Effect of haptic feedback in laparoscopic surgery skill acquisition. Surgical Endoscopy, 26(4), 1128-1134.

22. Kesner, J.E., Gavalis, R., Wong, P.Y., Cao, C.G.L. (2011). Multi-fiber optical bend sensor to aid colonoscope navigation. Optical Engineering, 50(12), 124402.

23. Gavalis, R.M., Wong, P.Y., Eisenstein, J.A., Lilge, L., Cao, C.G.L. (2010). Localized active-cladding optical fiber bend sensor. Optical Engineering, 49(6), 064401.

24. Eisenstein, J.A., Wong, P.Y., Cao, C.G.L. (2010). Evaluation of techniques to model bend loss in multimode fibers. Applied Optics, 49(12), 2220-2231. (Also published in the Virtual Journal for Biomedical Optics, 5(9) http://www.opticsinfobase.org/VJBO/abstract.cfm?URI=ao-49-12-2220)

25. Conrad, C., Konuk, Y., Werner, P., Cao, C.G.L., Warshaw, A., Rattner, D., Jones, D.B., Gee, D. (2010). The effect of defined auditory conditions versus mental loading on the laparoscopic motor skill performance of experts. Surgical Endoscopy, 24, 1347-1352.

26. Sankaranarayanan, G., Lin, H., Arikatla, V.S., Mulcare, M., Zhang, L., Derevianko, A., Lim, R., Fobert, D., Cao, C.G.L., Schwaitzberg, S.D., Jones, D.B., De, S. (2010). Preliminary face and construct validation study of a virtual basic laparoscopic skill trainer. Journal of Laparoendoscopic & Advanced Surgical Techniques, 20(2), 153-157.

27. Barrios, L., Tsuda, S., Derevianko, A., Barnett, S., Moorman, D., Cao, C.G.L., Karavas, A.N., Jones, D.B. (2009). Framing family conversation after early diagnosis of iatrogenic injury and incidental findings. Surgical Endoscopy, 23(11), 2535-2542.

28. Bell, A., Zhou, M., Schwaitzberg, S.D., Cao, C.G. L. (2009). Using a Dynamic Training Environment to Acquire Laparoscopic Surgery Skill. Surgical Endoscopy, 23(10), 2356-2363.

29. Cao, C.G.L., Weinger, M., Slagle, J., Zhou, C., et al. (2008). Differences in Day and Night Shift Clinical Performance in Anesthesiology. Human Factors, 50(2), 276-290.

30. O’Connor, A., Schwaitzberg, S.D., Cao, C.G.L. (2007). How much feedback is necessary for learning to suture? Surgical Endoscopy, 22(7), 1614-1619.

31. Zhou, M., Perreault, J., Schwaitzberg, S.D., Cao, C.G.L. (2007). Effect of experience on force perception threshold in minimally invasive surgery. Surgical Endoscopy, 22(2), 510-515.

32. Cao, C.G.L., Zhou, M.G., Jones, D.B., Schwaitzberg, S.D. (2007). Can surgeons think and operate with haptics at the same time? Journal of Gastrointestinal Surgery, 11(11), 1564-1569.

33. Shimotsu, R. & Cao, C.G.L. (2007). The effect of color-contrasting shadows on a dynamic 3D laparoscopic surgical task. IEEE Transactions on Systems, Man, and Cybernetics, Part A: Systems and Humans, 37(6), 1047-1053.

34. Bell, A., Saide, M., Johanas, J., Leisk, G.G., Schwaitzberg, S.D., Cao, C.G.L. Innovative dynamic minimally invasive training environment (DynaMITE) (2007). Journal of Surgical Innovation, 14(3), 2007, 217-224.

35. Cao, C.G.L. & Milgram, P. (2007). Direction and location are not sufficient for navigating in non-rigid environments – an empirical study in augmented reality. Presence: Teleoperators and Virtual Environments, 16(6), 584-602.

36. Cao, C.G.L. (2007). Guiding navigation in colonoscopy. Surgical Endoscopy: New Technology, 21, 480-484.

Page 14: CAROLINE G. L. CAO, Ph.D. - people.wright.edupeople.wright.edu/sites/people.wright.edu/files/user-uploads/curriculum... · Caroline G.L. Cao, JAN 2016, p. 3of 27 Track co-chair, Technical

Caroline G.L. Cao, JAN 2016, p. 14 of 27

37. Webster, J. & Cao, C.G.L. (2006). Lowering communication barriers in operating room technology. Human Factors, 48(4), 747-758.

38. Perreault, J. & Cao, C.G.L. (2006). Effects of vision and friction on haptic perception. Human Factors, 48(3), 574-586.

39. Goodell, K., Cao, C.G.L., Schwaitzberg, S. (2006). The effects of cognitive distraction on performance of laparoscopic surgical tasks. Journal of Laparoendoscopic & Advanced Surgical Techniques, 16(2), 94-98.

40. Avgerinos, D., Goodell, K., Waxberg, S., Cao, C.G.L., Schwaitzberg, S. (2005). Comparison of the sensitivity of physical and virtual laparoscopic training simulators to the user’s level of experience. Surgical Endoscopy, 19(9), 1211-1215.

41. Cao, C.G.L. & Rogers, G. (2004). Robot-assisted minimally invasive surgery: The importance of human factors analysis and design. Surgical Technology International, Vol. 12, 73-86.

42. MacKenzie, C.L., Cao, C.G.L., Ibbotson, J.A., Lomax, A.J. (2001). Hierarchical decomposition of laparoscopic surgery: A human factors approach to investigating the operating room environment. Journal of Minimally Invasive Therapy and Allied Technologies (MITAT), Vol. 10 (3), 121-127.

Refereed Book Chapters 1. Cao, C.G.L. & Rogers, G. (2007). Robotics in healthcare. In: Handbook of Human Factors

and Ergonomics in Healthcare and Patient Safety, Edited by Pascale Carayon. Lawrence Erlbaum Ass.

2. Rogers, G. & Cao, C.G.L. (2004). Coupling surgeons with technology: The next generation of surgical robots. In: Primer of Robotic and Telerobotic Surgery, Edited by Garth Ballantyne. Lippincott, Williams & Wilkins Pub.

Refereed Conference Proceedings (Total 134) 1. Dorozhkin, D., De, S., Jones, D., Schwaitzberg, S., Jones, S., Olasky, J., Molina, M,

Henriques, S., Wang, J., Flinn, J., Cao, C.G.L. (2016). OR fire virtual training simulator: design and face validity. To be presented at the 2016 SAGES Annual Meeting, Boston, MA, March 16-19, 2016.

2. Wang, J., Ahn, W., Dorozhkin, D., Jones, D., De, S., Cao, C.G.L. (2016). Virtual translumenal endoscopic surgical trainer (VTEST): an evaluation study. To be presented at the 2016 SAGES Annual Meeting, Boston, MA, March 16-19, 2016.

3. Wang, J., Hellan, M., Lin, K., Watson, K., Galloway, M., Cao, C.G.L. (2016). Need help with port-placement in robot-assisted surgery: a survey study. To be presented at the 2016 SAGES Annual Meeting, Boston, MA, March 16-19, 2016.

4. Linsk, A.M., Diller, E., Monden, K., Sankaranarayanan, G., Ahn, W., Awtrey, C., De, S., Jones, D., Schwaitzberg, S., Epstein, S., Rideout, J., Cao, C.G.L. (2016). Comparison of learning curves on the FLS and the Virtual Basic Laparoscopic Skill Trainer (VBLaST): pattern cutting and ligating loop tasks. To be presented at the 2016 SAGES Annual Meeting, Boston, MA, March 16-19, 2016.

5. Luu, D.K., Dumas, D., Coles, T.R., Wang, J., Cao, C.G.L. (2015). Replicating contralateral haptic feedback. IEEE SMC 2015 Conference, Hong Kong, October 9-12, 2015.

6. Diller, E., Cao, C.G.L. (2015). The use of stochastic resonance in a two-dimensional Fitts’ task. BMES 2015 Annual Meeting, Tampa, Florida, October 7-10, 2015.

7. Maddah, M., Wang, J., Galloway, M., Lin, K., Watson, K., Cao, C.G.L. (2015). Kinect accuracy in abdominal surface reconstruction for robotic surgery. BMES 2015 Annual Meeting, Tampa, Florida, October 7-10, 2015.

8. Babbit, K., Hoskins, R., Wang, J., Diller, E., Spindler, D., Cao, C.G.L. (2015). Vibrotactile feedback and stochastic resonance improves simulated laparoscopic palpation. 2015 Medical Student Program, American College of Surgeons, Division of Education. Chicago,

Page 15: CAROLINE G. L. CAO, Ph.D. - people.wright.edupeople.wright.edu/sites/people.wright.edu/files/user-uploads/curriculum... · Caroline G.L. Cao, JAN 2016, p. 3of 27 Track co-chair, Technical

Caroline G.L. Cao, JAN 2016, p. 15 of 27

IL, October 4-6, 2015. 9. Butler K, Petrusa E, Spindler D, Halic T, Ryanson A, Sankaranarayanana, G,De S, deMoya

M, Cao, C.G.L. (2015). Development of a Virtual Airway Skill Trainer (VAST): An Initial Task Analysis of the Open Cricothyroidotomy. 2015 ASE Annual Meeting, Seattle, WA, April 23-25, 2015.

10. Jones S.B., Spindler D., Sankaranarayanan G., Halic T., Jones D.B., De S., Cao C. (2015). Development of a Virtual Airway Skill Trainer (VAST): An Initial Task Analysis. 2015 SEA Annual Meeting, Seattle, WA, April 24 - 26, 2105.

11. Hoskins, R.D., Babbitt, K., Wang, J., Diller, E., Cao, C.G.L. (2015). Use of stochastic resonance methods for improving laparoscopic surgery performance. 2015 SAGES Annual Meeting, Nashville, TN, April 15-18, 2015.

12. Flinn, J., Berguer, R., Cao, C.G.L. (2015). Display optimisation of indocyanine green cholangiography (ICG) imaging. 2015 SAGES Annual Meeting, Nashville, TN, April 15-18, 2015.

13. Wang, J., Lin, K., Watson, K., Cao, C.G.L. (2015). 3D modelling of patient-specific abdomen for port placement planning in robot-assisted surgery. 2015 SAGES Annual Meeting, Nashville, TN, April 15-18, 2015.

14. Rinehart, B., Martin, M., Cao, C.G.L. (2015). Characterisation of concentration effects on optical properties of CdTe quantum dots. SPIE Smart Structures /NDE 2015. San Diego, CA, March 8-12, 2015.

15. Weyhrauch, P., Niehaus, J., Cao, C.G.L., Schwaitzberg, S.D. (2015). Research & development on capturing, defining, and assessing cognitive skills – methodology for annotating skill trees (MAST). International Meeting for Simulation in Healthcare. New Orleans, January 10-15, 2015.

16. Coles, T., Dumas, C., Cao, C.G.L. (2014). ETrack: Ergonomic assessment tool in surgical settings. Symposium: Ergonomic aspects of clinical and surgical procedures. The 2014 International Annual Meeting of the Human Factors and Ergonomics Society. Chicago, IL, October 27-31, 2014.

17. Lou, Y., Finn, J., Ganapathy, S., Weywrach, P., Niehaus, J., Cao, C.G.L. (2014). Supporting procedural and perceptual learning in laparoscopic surgery. The 2014 International Annual Meeting of the Human Factors and Ergonomics Society. Chicago, IL, October 27-31, 2014.

18. Flinn, J., Miller, A., Saxe, J., Cao, C.G.L. (2014). Display optimisation for ICG medical imaging: A psychophysical approach. The 2014 International Annual Meeting of the Human Factors and Ergonomics Society. Chicago, IL, October 27-31, 2014.

19. Wang, J. & Cao, C.G.L. (2014). Reproduction of displacement with haptic feedback in 3D space. The 2014 International Annual Meeting of the Human Factors and Ergonomics Society. Chicago, IL, October 27-31, 2014.

20. Dumas, C., Coles, T., de Visser, H., Cao, C.G.L., Grimpen, F. (2014). Haptic feedback tuning in colonoscopy simulation. Presented at Eurohaptics 2014, Versailles, France, June 24-26, 2014.

21. Sankaranarayanan, G., Baichun, L., Chellali, A., Mentis, H., Jones, S. Jones, D.B., Schwaitzberg, S., De, S., Cao, C.G.L. (2014). A new virtual reality immersive surgical trainer with distractions for situated and cognitive training. Presented at the 2014 Surgical Education Week of the Annual Meeting of the Associate for Surgical Education, Chicago, IL, April 8-12, 2014.

22. Baichun, L., Sankaranarayanan, G., Jones, S. Jones, D.B., Schwaitzberg, S., De, S., Cao, C.G.L. (2014). Preliminary validation of a novel VR2C (VR within VR) simulator for surgical education. Presented at the 2014 Surgical Education Week of the Annual Meeting of the Associate for Surgical Education, Chicago, IL, April 8-12, 2014.

23. Coles, T., Cao, C.G.L., Dumas, C. (2014). Medimq: a medical image diagnostic learning and assessment tool. Presented at the 2014 SAGES Annual Meeting, Salt Lake City, UT, April 2-5, 2014.

Page 16: CAROLINE G. L. CAO, Ph.D. - people.wright.edupeople.wright.edu/sites/people.wright.edu/files/user-uploads/curriculum... · Caroline G.L. Cao, JAN 2016, p. 3of 27 Track co-chair, Technical

Caroline G.L. Cao, JAN 2016, p. 16 of 27

24. Dumas, C., Cao, C.G.L., Coles, T. (2014). ETrack: an affordable ergonomic assessment tool for surgical settings. Presented at the 2014 SAGES Annual Meeting, Salt Lake City, UT, April 2-5, 2014.

25. Miller, A., Saxe, J., Cao, C.G.L. (2014). ICG infrared imaging: a novel alternative to intraoperative cholangiography. Presented at the 2014 SAGES Annual Meeting, Salt Lake City, UT, April 2-5, 2014.

26. Chellali, A., Ahn, W., Sankaranarayanan, Flinn, J., G., Schwaitzberg, S., Jones, D., Cao, C.G.L. (2014). Preliminary evaluation of the pattern cutting and the ligating loop virtual laparoscopic trainers. Presented at the 2014 SAGES Annual Meeting, Salt Lake City, UT, April 2-5, 2014.

27. Cao, C.G.L (2014). Experience and work culture in robotic surgery. Panel: Conducting studies in the OR: Translating HFE research into clinical best practice. The HFES 2014 International Symposium on Human Factors and Ergonomics in Health Care: Leading the Way. Chicago, IL. March 16-19, 2014.

28. Abtahi, K., Flinn, J., Yaklic, J., Cao, C.G.L., Galloway, M. (2014). Smart phones and intraoperative assessment of obstetric and gynecologic residents: The future is here! The 2014 CREOG and APGO Annual Meeting, Atlanta, GA. Feb. 26-Mar. 1, 2014.

29. Simoes, M. & Cao, C.G.L. (2013). Leonardo: A first step towards an interactive decision aid for port-placement in robotic surgery. IEEE SMC 2013 Conference, Part SMC: Human-Machine. Manchester, UK, October 13-16, 2013.

30. Wang, J., Chellali, A., Cao, C.G.L. (2013). A study of communication modalities in a virtual collaborative task. IEEE SMC 2013 Conference, Part SMC: Human-Machine. Manchester, UK, October 13-16, 2013.

31. Sankaranarayanan, G. & Cao, C.G.L. (2013). Generation (GEN) 2 surgical simulator. Symposium: Me and My VE, Part 2. The 57th Annual Meeting of the Human Factors and Ergonomics Society. San Diego, CA, September 30 – October 4, 2013.

32. Miller, A., Sun, T., Ganapathy, S., Pyatka, N., Weyrauch, P., Niehaus, J., Cao, C.G.L. (2013). Strategies for training for technical and non-technical surgical skills. Symposium: MIS – Beyond the box trainer. The 57th Annual Meeting of the Human Factors and Ergonomics Society. San Diego, CA, September 30 – October 4, 2013.

33. Chellali, A. & Cao, C.G.L. (2013). The impact of new instrumentation on surgical performance in Natural Orifice Translumenal Endoscopic Surgery. Symposium: MIS – Beyond the box trainer. The 57th Annual Meeting of the Human Factors and Ergonomics Society. San Diego, CA, September 30 – October 4, 2013.

34. Sankaranarayanan, G. & Cao, C.G.L. (2013). Characterization of the learning plateau and the learning rate of the VBLaST PT simulator with a kinematic objective performance metric. Symposium: MIS – Beyond the box trainer. The 57th Annual Meeting of the Human Factors and Ergonomics Society. San Diego, CA, September 30 – October 4, 2013.

35. Flinn, J., Galloway, M., Lin, K., Cao, C.G.L. (2013). Development and usability testing of an online tool for intraoperative assessment of surgical residents. The 57th Annual Meeting of the Human Factors and Ergonomics Society. San Diego, CA, September 30 – October 4, 2013.

36. Flinn, J., Wood, D., Cao, C.G.L. (2013). Technology-based procedure for automatic and objective error measurement in FLS pattern cutting task. Presented at The Annual Meeting of the Society of Gastrointestinal and Endoscopic Surgeons (SAGES), Baltimore, MD, April 17-20, 2013.

37. Sankaranarayanan, G., Zhang, L., De, S., Jones, D. B., Schwaitzberg, S., Cao, C.G.L. (2013). The learning plateau and the learning rate for the VBLaST-PT compared to the FLS simulator. Presented at the 2013 Association For Surgical Education (ASE) Annual Meeting, Orlando, FL.

38. Nemani, A., Sankaranarayanan, G., Cao, C.G.L., De, S. (2013). Hierarchical task analysis of hybrid rigid scope natural orifice translumenal endoscopic surgery (NOTES)

Page 17: CAROLINE G. L. CAO, Ph.D. - people.wright.edupeople.wright.edu/sites/people.wright.edu/files/user-uploads/curriculum... · Caroline G.L. Cao, JAN 2016, p. 3of 27 Track co-chair, Technical

Caroline G.L. Cao, JAN 2016, p. 17 of 27

cholecystectomy procedures. Presented at the 2013 Medicine Meets Virtual Reality Conference, February, San Diego, CA.

39. Olasky, J., Eskander, M., Ahn, W., Sankaranarayanan, G., De, S., Chellai, A., Cao, G. L., Feldman, L.S., Schwaitzberg, S., Jones, D. B. (2013). The Impact of Simulator Based Electrosurgical Training on Resident Education. Presented at The Annual Meeting of the Society of Gastrointestinal and Endoscopic Surgeons (SAGES), Baltimore, MD, April 17-20, 2013.

40. Chellali, A., Sankaranarayanan, G., Zhang, L., Cao, C.G.L., De, S., Jones, D.B., Schneider, B. (2013). Effects of sleep hours and fatigue on performance in laparoscopic surgery simulators. Presented at The Annual Meeting of the Society of Gastrointestinal and Endoscopic Surgeons (SAGES), Baltimore, MD, April 17-20, 2013.

41. Cao, C.G.L., Matthews, G., Malek, D., Neville, K., Ryan, J., Shneider, M. (2013). Panel: Human factors in robotics safety: From individual to organisation. 2013 Safety Across High Consequence Industries (SAHI) Conference, St. Louis, March 12-13, 2013.

42. Nemani, A., Sankaranarayanan, G., Roberts, K., Panait, L., Cao, C.G.L., De, S. (2012). Hierarchical task analysis of hybrid rigid scope natural orifice translumenal endoscopic surgery (NOTES) cholecystectomy procedures. Studies in Health Technology and Informatics, 184, 293-297.

43. Banez, J. & Cao, C.G.L. (2012). Ergonomics of robotic surgery. Symposium on Ergonomic aspects of clinical and surgical procedures. Proceedings of the 56th Annual Meeting of the Human Factors and Ergonomics Society. Boston, Massachusetts, October 22-26, 2012.

44. Cunningham, S. & Cao, C.G.L. (2012). Spatial communication in robotic surgery. Proceedings of the 56th Annual Meeting of the Human Factors and Ergonomics Society. Boston, Massachusetts, October 22-26, 2012.

45. Balestra, M. & Cao, C.G.L. (2012). Affective interactions: Developing a framework to enable meaningful haptic interactions over geographic distance. Applied Human Factors and Ergonomics International 2012. San Francisco, CA, July 19-23, 2012.

46. Grosdemouge, C., Weyhrauch, P., Niehaus, J., Schwaitzberg, S., Cao, C.G.L. (2012). Design of training protocol for perceptual and technical skills in minimally invasive surgery. 2012 Proceedings of the ASME 11th Biennial Conference on Engineering Systems Design and Analysis (ESDA 2012), 855-860.

47. Cao, C.G.L., Danahy, E., Goble, J. (2012). Educational robotics for a teleoperated general exam. 2012 IEEE International Conference on Technologies for Practical Robot Applications (TePRA), Woburn, MA, April 11-12, 2012.

48. Banez, J., Caro, S., Cao, C.G.L. (2012). Modelling patients for optimised port placement in robot-assisted surgery. 2012 Proceedings of the ASME 11th Biennial Conference on Engineering Systems Design and Analysis (ESDA 2012), 821-826.

49. Cunningham, S., Chellali, A., Cao, C.G.L. (2012). Design of a spatial aid for team communication in robotic surgery. 2012 Proceedings of the ASME 11th Biennial Conference on Engineering Systems Design and Analysis (ESDA 2012), 847-854.

50. Monzon, E.L.R., Chellali, A., Dumas, C., Cao, C.G.L. (2012). Training effects of a visual aid on haptic sensitivity in a needle insertion task. The 2012 IEEE Haptics Symposium: Engaging and Connecting with the User, Vancouver, Canada, March 4-7, 2012.

51. Cao, C.G.L. & Rivera, C. (2012). Ergonomic considerations in natural orifice translumenal endoscopic surgery. Symposium on Ergonomic Aspects of Clinical and Surgical Procedures. IEA 2012 Meeting, Recife, Brazil, February 12-16, 2012.

52. Zhang, L., Grosdemouge, C., Sankaranarayanan, G., Anh, W., Sreekanth, A.V., De, S., Jones, D., Schwaitzberg, S., Cao, C.G.L. (2012). The reality of virtual reality technology for surgical training. IEA 2012 Meeting, Recife, Brazil, February 12-16, 2012.

53. Monzon, E.L.R., Chellali, A., Dumas, C., Cao, C.G.L. (2011). Haptic sensitivity in needle insertion: the effects of training and visual aid. International Conference of the European SKILLS Project, Montpellier, France, December 15-16, 2011.

Page 18: CAROLINE G. L. CAO, Ph.D. - people.wright.edupeople.wright.edu/sites/people.wright.edu/files/user-uploads/curriculum... · Caroline G.L. Cao, JAN 2016, p. 3of 27 Track co-chair, Technical

Caroline G.L. Cao, JAN 2016, p. 18 of 27

54. Wong, C., Grosdemouge, C., Milleville, I., C., Dumas, C., Cao, C.G.L. (2011). Human haptic evaluation. Proceedings of the 55th Annual Meeting of the Human Factors and Ergonomics Society. Las Vegas, September 19- 23, 2011.

55. Takac, B. Grosdemouge, C., Chellali, A., Milleville, I., Dumas, C. Cao, C.G.L. (2011). Haptic communication. Proceedings of the 55th Annual Meeting of the Human Factors and Ergonomics Society. Las Vegas, September 19- 23, 2011.

56. Cao, C.G.L., Wong, P.Y., Eisenstein, J. (2011). Development of a shape tracker for colonoscopy navigation. The Annual Meeting of the Society of Gastrointestinal and Endoscopic Surgeons (SAGES), Emergent Technology. San Antonio, TX, March 30-April 2, 2011.

57. Cao, C.G.L. & Danahy, E. (2011). Increasing accessibility to medical robotics education. The 2011 IEEE International Conference on Technologies for Practical Robot Applications (TePRA), Woburn, MA, April 11-12, 2011.

58. Zhang, L. & Cao, C.G.L. (2010). The effect of image orientation on a dynamic laparoscopic task. Proceedings of the 54th Annual Meeting of the Human Factors and Ergonomics Society. San Francisco, September 27 – October 1, 2010.

59. Zhou, M. & Cao, C.G.L. (2009). Vibrotactile feedback improves laparoscopic palpation skills. Proceedings of the 53rd Annual Meeting of the Human Factors and Ergonomics Society, San Antonio, TX, October 19-23, 2009. HEALTHCARE TECHNICAL GROUP BEST STUDENT PAPER PRIZE

60. Zhou, M. & Cao, C.G.L. (2009). Application of vibrotactile stimulation to augment haptic perception in minimally invasive surgery. Proceedings of the 2009 International Ergonomics Association Congress, Beijing, China, August 9-14, 2009.

61. Bell, A. & Cao, C.G.L. (2009). Vibration frequency modulation for force-feedback delivery in laparoscopic surgery. Proceedings of the 2009 International Ergonomics Association Congress, Beijing, China, August 9-14, 2009.

62. Eisenstein, J., Gavalis, R., Wong, P.Y., Cao, C.G.L. (2009). Optical design of endoscopic shape-tracker using quantum dots embedded in fiber bundles. Novel Optical Systems Design and Optimization XII 2009, Proceedings of SPIE, 74290X.

63. Bell, A., Schwaitzberg, SD, Cao, C.G.L. (2009). Using vibration to provide force information during surgery. Presented at the 2009 Meeting of the Society of American Gastrointestinal and Endoscopic Surgeons, April 22-25, 2009, Phoenix, Arizona. BEST POSTER AWARD

64. Lin, H., Sankaranarayanan, G., Jones, D.B., Sreekanth, A.V., Mulcare, M., Zhang, L., Derevianko, A., Lim, R., Fobert, D., Cao, C.G.L., Schwaitzberg, S.D., Suvranu, D. (2009). Steps toward virtual reality FLS: Virtual Basic Laparoscopic Skill Trainer (VBLAST) preliminary face and construct validity study. Presented at the 2009 Meeting of the Society of American Gastrointestinal and Endoscopic Surgeons, April 22-25, 2009, Phoenix, Arizona.

65. Zhou, M., Tse, S., Derevianko, A., Jones, D.B., Schwaitzberg, S.D., Cao, C.G.L. (2008). The effect of haptic feedback on laparoscopic suturing and knot-tying: A learning curve study. Proceedings of the 52nd Annual Meeting of the Human Factors and Ergonomics Society.

66. Cao, C.G.L. (2008). Navigation in a non-rigid environment: colonoscopy. Presented at the APA Division 21 Symposium, Boston, MA, August 14-17, 2008.

67. Gavalis, R.M., Xing, H., Wong, P.Y., Lilge, L., Cao, C.G.L. (2008). Endoscope shape-tracker based on embedded fluorescent dyes in an optical fiber. Presented at the ASME 2008 Summer Bioengineering Conference, Proceedings of the ASME 2008 Summer Bioengineering Conference (SBC2008), Marco Island, FL, June 25-29, 2008.

68. Gavalis, R.M., Xing, H., Wong, P.Y., Lilge, L., Cao, C.G.L. (2008). Design of a navigational aid for colonoscopy. Presented at the 3rd Frontiers in Biomedical Devices Conference, Proceedings of BioMed2008, Irvine, CA, June 18-20, 2008. Journal of Medical Devices, 2(2), 027523. http://link.aip.org/link/?MED/2/027523 BEST POSTER AWARD -- 2ND PLACE

Page 19: CAROLINE G. L. CAO, Ph.D. - people.wright.edupeople.wright.edu/sites/people.wright.edu/files/user-uploads/curriculum... · Caroline G.L. Cao, JAN 2016, p. 3of 27 Track co-chair, Technical

Caroline G.L. Cao, JAN 2016, p. 19 of 27

69. Gavalis, R., Xing, H., Wong, P.Y., Lilge, L., Cao, C.G.L. (2008). Design of a real-time guidance system for colonoscopy. Presented at the 2008 Design of Medical Devices Conference, Minneapolis, Minnesota, April 15-17, 2008.

70. Zhou, M., Tse, S., Derevianko, A., Jones, D.B., Schwaitzberg, S.D., Cao, C.G.L. (2008). Learning Curve in Laparoscopic Suturing With Haptic Feedback. Presented at the 2008 meeting of the Society of American Gastrointestinal and Endoscopic Surgeons, Philadelphia, PA, April 9-12, 2008.

71. Bell, A., Saide, M., Johanas, J., Leisk, G., Schwaitzberg, S.D., Cao, C.G.L. (2008). Using a Dynamic Training Environment to Assess Laparoscopic Skill. Proceedings of the 2008 Meeting of the Society of American Gastrointestinal and Endoscopic Surgeons, Philadelphia, PA, April 9-12, 2008.

72. Bell, A., Mandelupe, E., Schwaitzberg, S.D., Cao, C.G.L. (2008). Speed-Accuracy Tradeoff in VR Simulator with Haptic Feedback. Proceedings of the 2008 meeting of the Society of American Gastrointestinal and Endoscopic Surgeons, Philadelphia, PA, April 9-12, 2008.

73. Barrios, L., Tsuda, S., Derevianko, A., Barnett, S., Moorman, D., Cao, C.G.L., Jones, D.B. (2008). Framing family conversation after early diagnosis of iatrogenic injury and incidental findings. Proceedings of the 2008 meeting of the Society of American Gastrointestinal and Endoscopic Surgeons, Philadelphia, PA, April 9-12, 2008.

74. Cao, C.G.L., Lilge, L., Wong, P., Xing, H., Zamarripa, N. (2008). Advanced shape tracking to improve flexible endoscopic diagnostics. In T. Kundu (Ed.), Health Monitoring of Structural and Biological Systems 2008, Proceedings of SPIE, 6935, 6935221-6935228.

75. Dezube, R., Dale, C., Weinger, M., Muldoon, R, Ayers, G. D., Zhong, S., Cao, C.G.L. (2008). Procedural learning in simulated colonoscopy. Presented at the 2008 International Meeting on Simulation in Healthcare, San Diego, CA, January 13-16, 2008.

76. Barrios, L., Tsuda, S., Derevianko, A., Barnett, S., Moorman, D., Cao, C.G.L., Karavas, A.N., Jones, D.B. (2007). Framing family conversation after early diagnosis of iatrogenic injury and incidental findings. Presented at the 54th Annual Meeting of the Massachusetts Chapter of the American College of Surgeons, Boston, MA, December 8, 2007.

77. Dezube, R., Dale, C., Weinger, M., Muldoon, R, Ayers, G. D., Zhong, S., Cao, C.G.L. (2007). Procedural learning in simulated colonoscopy. Presented at the NASPGHAN Annual meeting, Salt Lake City, UT, October 25 -27, 2007.

78. Bell, A. & Cao, C.G.L. (2007). Effects of artificial force feedback in laparoscopic surgery training simulators. Symposium on Haptics in Medical Applications (Chair: Greg Gerling). Proceedings of the IEEE International Conference on Systems, Man, and Cybernetics, 2239-2243.

79. Zhou, M.G., Perreault, J., Schwaitzberg, S.D. & Cao, C.G.L. (2007). Force perception threshold varies with experience in minimally invasive surgery. Symposium on Haptics in Medical Applications (Chair: Greg Gerling). Proceedings of the IEEE International Conference on Systems, Man, and Cybernetics, 2228-2232.

80. Afram, A., Briedis, J., Fujiwara, D., Jacob, R., Cao, C.G.L., Kahle, D. (2007). Evaluation of semantic fisheye zooming to provide focus+context. Proceedings of the 51st Annual Meeting of the Human Factors and Ergonomics Society, 459-463.

81. Zhou, M.G., Perreault, J., Schwaitzberg, S.D., Cao, C.G.L. (2007). Shifts in force perception threshold in laparoscopic surgery with experience. Proceedings of the 51st Annual Meeting of the Human Factors and Ergonomics Society, 636-640.

82. Zhou, M.G., Jones, D., Schwaitzberg, S.D., Cao, C.G.L. (2007). Role of haptic feedback and cognitive load in surgical skill acquisition. Proceedings of the 51st Annual Meeting of the Human Factors and Ergonomics Society, 631-635.

83. Bell, A. & Cao, C.G.L. (2007). How does artificial force feedback affect laparoscopic surgery performance? Proceedings of the 51st Annual Meeting of the Human Factors and Ergonomics Society, 646-650.

Page 20: CAROLINE G. L. CAO, Ph.D. - people.wright.edupeople.wright.edu/sites/people.wright.edu/files/user-uploads/curriculum... · Caroline G.L. Cao, JAN 2016, p. 3of 27 Track co-chair, Technical

Caroline G.L. Cao, JAN 2016, p. 20 of 27

84. Cao, C.G.L., Kalsher, M., Vredenburg, A., Weinger, M., Israelski, E. (2007). Mock trial: Role of human factors in litigation involving an automatic external defibrillator (AED). Proceedings of the 51st Annual Meeting of the Human Factors and Ergonomics Society, 1514-1516.

85. Cao, C.G.L. (2007). Panel: Beyond see-one, teach-one: Applying HF to clinical training and education. (Panel chair: Klaus Christoffersen). Proceedings of the 51st Annual Meeting of the Human Factors and Ergonomics Society, 755-759.

86. Cao, C.G.L., Zhou, M.G., Jones, D.B., Schwaitzberg, S.D. (2007). Can surgeons think and operate with haptics at the same time? Presented at the Society of Surgery of the Alimentary Tract 48th Annual Meeting, Washington, DC, May 19-23, 2007. POSTER OF DISCTINCTION AWARD

87. O’Connor, A., Cao, C.G.L. & Schwaitzberg, S. (2007). Impact of knowledge of results in surgical skills training. Surgical Endoscopy, 21 (supplement 1), S312.

88. Bell, A., Johanas, J., Cao, C.G.L. & Schwaitzberg, S. (2007). Dynamite skill assessment system: initial evaluation. Surgical Endoscopy, 21 (supplement 1), S344. POSTER OF DISTINCTION AWARD

89. Schoonmaker, R.E. & Cao, C.G.L. (2006). Vibrotactile force feedback system for minimally invasive surgical procedures. Proceedings of the 2006 IEEE International Conference on Systems, Man, and Cybernetics, 2464-2469.

90. Waxberg, S. & Cao, C.G.L. (2006). Modelling surgical resident performance. Proceedings of the 50th Annual Meeting of the Human Factors and Ergonomics Society, 994-998.

91. Shimotsu, R. & Cao, C.G.L. (2006). Improving depth perception in laparoscopic surgery using colour-contrasting shadows. Proceedings of the 50th Annual Meeting of the Human Factors and Ergonomics Society, 1024-1028.

92. Schoonmaker, R. & Cao, C.G.L. (2006). Vibrotactile feedback enhances force perception in minimally invasive surgery. Proceedings of the 50th Annual Meeting of the Human Factors and Ergonomics Society, 1029-1033. HEALTHCARE TECHNICAL GROUP BEST STUDENT PAPER PRIZE

93. Hall, T.J., Rudolph, J. W. & Cao, C.G.L. (2006). Fixation and attention allocation in anaesthesiology crisis management: an abstraction hierarchy perspective. Proceedings of the 50th Annual Meeting of the Human Factors and Ergonomics Society, 1064-1067.

94. Cao, C.G.L., Ozdas, A., Slagle, J. (2006). Utilisation of computerised order entry protocols in the ICU for glucose management. Proceedings IEA 2006 Congress, Maastricht, the Netherlands, July 10-14, 2006.

95. O’Connor, A., Cao, C.G.L. & Schwaitzberg, S. (2006). Knowledge of results in surgical skills training. Current Surgery. BEST PAPER PRIZE – 3RD PLACE

96. Vuong, L., Schwaitzberg, S., Cao, C.G.L. (2006). What can motion derivatives tell us about skill performance. Surgical Endoscopy, 20 (Supplement 1), S254-282.

97. Nguyen, T., Schwaitzberg, S., Cao, C.G.L. (2006). Effect of friction and vision on simulated laparoscopic surgery performance. Surgical Endoscopy, 20 (Supplement 1), S254-282.

98. Rivera, C. & Cao, C.G.L. (2005). Toward improved communication in laparoscopic surgery: Accounting for multiple frames of reference and visuomotor transformations. Proceedings of the 49th Annual Meeting of the Human Factors and Ergonomics Society, 999-1003.

99. Waxberg, S., Schwaitzberg, S. & Cao, C.G.L. (2005). Effects of video game experience on laparoscopic skill acquisition. Proceedings of the 49th Annual Meeting of the Human Factors and Ergonomics Society, 1047-1051.

100. Gaulin, M. & Cao, C.G.L. (2005). Surgical learning aid: Reducing uncertainty for the novice during simulated minimally invasive surgery. Proceedings of the 49th Annual Meeting of the Human Factors and Ergonomics Society, 1089-1093.

101. Rivera, C. & Cao, C.G.L. (2005). The effect of tool angle on force perception in a simulated laparoscopic environment. Presented at the New England Surgical Society Annual Meeting, Boston, MA, May 27, 2005.

Page 21: CAROLINE G. L. CAO, Ph.D. - people.wright.edupeople.wright.edu/sites/people.wright.edu/files/user-uploads/curriculum... · Caroline G.L. Cao, JAN 2016, p. 3of 27 Track co-chair, Technical

Caroline G.L. Cao, JAN 2016, p. 21 of 27

102. Webster, J. & Cao, C.G.L. (2004). Divided attention in using robotic surgical systems. Proceedings of the 48th Annual Meeting of the Human Factors and Ergonomics Society. 1751-1754.

103. Perreault, J. & Cao, C.G.L. (2004). Effects of friction on haptic perception in simulated endoscopic environments. Proceedings of the 48th Annual Meeting of the Human Factors and Ergonomics Society. 1704-1707.

104. Waxberg, S., Goodell, K., Avgerinos, D., Schwaitzberg, S., Cao, C.G.L. (2004). Evaluation of physical versus virtual surgical simulators. Proceedings of the 48th Annual Meeting of the Human Factors and Ergonomics Society. 1675-1679.

105. Alvarado, C. & Cao, C.G.L. (2004). Panel: Human factors in healthcare in 2020. Proceedings of the 48th Annual Meeting of the Human Factors and Ergonomics Society. 1764-1767.

106. Cao, C.G.L. & Taylor, H. (2004). Effects of new technology on the operating room team. Proceedings of the 7th International Conference on Work with Computing Systems, special session on IT in Healthcare. 309-312.

107. Cao, C.G.L. (2004). Hand-eye co-ordination in simulated laparoscopic surgery. Journal of Sport & Exercise Psychology, 26: S47.

108. Avgerinos, D., Rivera, C., Schwaitzberg, S., Cao, C.G.L. (2004). Visual and force feedback in laparoscopic robotic manipulation. Presented at the New England Surgical Society. Montreal, Canada, September 30, 2004.

109. Goodell, K., Avgerinos, D., Cao, C.G.L., Schwaitzberg, S. (2004). The effects of distraction on performance of laparoscopic surgical tasks. Presented at the New England Surgical Society. Montreal, Canada, September 30, 2004.

110. Cao, C.G.L. & Schwaitzberg, S. (2004). An alternative to haptics in robotic surgery. Surgical Endoscopy, 18 (5), 725-878.

111. Cao, C.G.L., Waxberg, S., Park, B., Schwaitzberg, S. (2004). Comparison of real versus virtual surgical training models. Surgical Endoscopy, 18 (5), 725-878.

112. Horn, M., Cao, C.G.L., Baise, L., Kilmer, M., Hassoun, S., Souvaine, D. (2004). Model for mentoring and retaining engineering students from underrepresented groups. Proceedings of the ASEE New England Section 2004 Annual Conference.

113. Cao, C.G.L., Webster, J., Perreault, J., Schwaitzberg, S., Rogers, G. (2003). Visually perceived force feedback in simulated robotic surgery. Proceedings of the 47th Annual Meeting of the Human Factors and Ergonomics Society. 1466-1470.

114. Cao, C.G.L., Waxberg, S., Smith, E. (2003). Role of landmark for spatial mapping in non-rigid environments. Proceedings of the 47th Annual Meeting of the Human Factors and Ergonomics Society. 1545-1548.

115. Cao, C.G.L. (2003). How do endoscopists maintain spatial awareness in colonoscopy? Proceedings of the International Ergonomics Association XVth Triennial Congress.

116. Cao, C.G.L., Schwaitzberg, S., Rogers, G. (2003). Visuomotor constraints in laparoscopic surgery: a human factors engineering perspective. Surgical Endoscopy, 17 (Supplement), S218-314.

117. Lomax, A.J., Payandeh, S., Dill, J., MacKenzie, C.L., Cao, C.G.L. (2002). Design of a virtual laparoscopic training environment based on time and motion analyses of surgeons’ manipulative performance. Proceedings of the Annual Meeting of the Society for Medical Innovation and Technology. National Hospital, Oslo, Norway, September 5, 2002.

118. Payandeh, S., Lomax, A.J., Dill, J., MacKenzie, C.L., Cao, C.G.L. (2002). On defining metrics for assessing laparoscopic surgical skills in a virtual training environment. In J.D. Westwood, H.M. Hoffman, R.A. Robb, D. Stredney (Eds.), Medicine Meets Virtual Reality: 10, Digital Upgrades: Applying Moore’s Law to Health. IOS Press, Washington, DC. 334-340.

Page 22: CAROLINE G. L. CAO, Ph.D. - people.wright.edupeople.wright.edu/sites/people.wright.edu/files/user-uploads/curriculum... · Caroline G.L. Cao, JAN 2016, p. 3of 27 Track co-chair, Technical

Caroline G.L. Cao, JAN 2016, p. 22 of 27

119. Cao, C.G.L. (2001). Designing for spatial orientation in non-rigid endoscopic environments. Proceedings of the 45th Annual Meeting of the Human Factors and Ergonomics Society. 1259-1263.

120. Cao, C.G.L. & Milgram, P. (2000). Case studies of disorientation in minimally invasive surgery. Proceedings of the 44th Annual Meeting of the Human Factors and Ergonomics Society and XIVth Triennial Congress of the International Ergonomics Association. Vol 4, 169-172.

121. MacKenzie, C.L., Ibbotson, J.A., Cao, C.G.L., Lomax, A.J. (2000). Hierarchical decomposition of goal-directed activity: a valuable research and investigative tool for minimally invasive surgery. Poster presented at the 7th World Congress of Endoscopic Surgery. Singapore, May 28-June 5, 2000, 409.

122. Cao, C.G.L. (2000). Augmented reality displays for endoscopic orientation and navigation. Doctoral Consortium. Proceedings of the CHI 2000 Conference on Human Factors in Computing Systems. 91-92.

123. Cao, C.G.L., MacKenzie, C.L., Ibbotson, J.A., Turner, L.J., Blair, N.P., & Nagy, A.G. (1999). Hierarchical decomposition of laparoscopic procedures. In J.D. Westwood, H.M. Hoffman, R.A. Robb, D. Stredney (Eds.), Medicine Meets Virtual Reality: 7. The Convergence of Physical and Informational Technologies: Options for a New Era in Healthcare. IOS Press, Washington, DC. 83-89.

124. MacKenzie, C.L., Graham, E.D., Cao, C.G.L., & Lomax, A.J. (1999). Virtual hand laboratory meets endoscopic surgery. In J.D. Westwood, H.M. Hoffman, R.A. Robb, D. Stredney (Eds.), Medicine Meets Virtual Reality: 7. The Convergence of Physical and Informational Technologies: Options for a New Era in Healthcare. IOS Press, Washington, DC. 212-218.

125. Ibbotson, J.A., MacKenzie, C.L., Cao, C.G.L., & Lomax, A.J. (1999). Gaze patterns in laparoscopic surgery. In J.D. Westwood, H.M. Hoffman, R.A. Robb, D. Stredney (Eds.), Medicine Meets Virtual Reality: 7. The Convergence of Physical and Informational Technologies: Options for a New Era in Healthcare. IOS Press, Washington, DC. 154-160.

126. MacKenzie, C.L., Ibbotson, J.A., Cao, C.G.L., & Lomax, A.J. (1998). Intelligent tools for minimally invasive surgeries: safety and error issues. In A.L. Scheffler & L.A. Zipperer (Eds.), Proceedings of Enhancing Patient Safety and Reducing Errors in Health Care. Chicago: National Patient Safety Foundation. 226-229.

127. MacKenzie, C.L., Cao, C.G.L., Nagy, A.G., Turner, L.J., & Lomax, A.J. (1997). Quantifying surgeons' performance. The International College of Surgeons XXXV North American Federation Congress: Enabling Technologies of the Minimal Access Revolution. Vancouver, BC, July 24-26, 1997.

128. Cao, C.G.L. & MacKenzie, C.L. (1997). Direct, 2-D vs. 3-D endoscopic viewing & surgical task performance. A Symposium on Evolving Technologies: Surgeons' Performance of Surgical Tasks. J. Sport and Exercise Psychology, 19, NASPSPA/ACSM Meeting. Denver, Colorado, May 28-June 1, 1997.

129. MacKenzie, C.L., Cao, C.G.L., Turner, L.J., Blair, N.P., & Nagy, A.G. (1997). Endoscopic viewing technologies on surgeons' performance. The 50th Annual Spring Meeting of the BC Surgical Society. Victoria, BC, April 30-May 3, 1997.

130. Cao, C.G.L., MacKenzie, C.L., & Payandeh, S. (1996). Task and motion analyses in endoscopic surgery. Proceedings of the ASME Dynamic Systems and Controls Division. (Fifth Annual Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems), DSC-Vol. 58, 583-590.

131. Cao, C.G.L., MacKenzie, C.L., & Payandeh, S. (1996). Precision and safety constraints in laparoscopic surgery. J. of Sport and Exercise Psychology, Volume 18 Supplement, 19.

132. Cao, C.G.L., MacKenzie, C.L., & Payandeh, S. (1995). Remote manipulation in endoscopic surgery: A task analysis approach. Abstract SCAPPS Annual Conference. Vancouver, B.C., October 1995, 62.

Page 23: CAROLINE G. L. CAO, Ph.D. - people.wright.edupeople.wright.edu/sites/people.wright.edu/files/user-uploads/curriculum... · Caroline G.L. Cao, JAN 2016, p. 3of 27 Track co-chair, Technical

Caroline G.L. Cao, JAN 2016, p. 23 of 27

133. Cao, C.G.L., & MacKenzie, C.L (1995). Effect of fatigue on grip force in a precision grip. J. Sport and Exercise Psychology, Volume 17 Supplement, 36.

134. Cao, C.G.L. & Hair, M.L. (1989). Measurement of charge on sterically stabilised polyacrylic acid polystyrene particles. Pacific Chemical Congress. Honolulu, Hawaii, December 16-22, 1989.

Other Publications 1. Cao, C.G.L. & Milgram, P. (2000). Augmented reality displays for endoscopic orientation

and navigation. Asbtracts of the 31st International Symposium on Robotics/ 9th Annual Institute for Robotics and Intelligent Systems/PRECARN Conference. Montreal, Quebec, May 14-17, 2000.

2. Milgram, P. & Cao, C.G.L. (1999). Mixed reality in the OR. Abstracts of the 9th Annual Institute for Robotics and Intelligent Systems/PRECARN Conference, Toronto, Canada, June 7-9, 1999.

3. Cao, C.G.L., MacKenzie, C.L., & Payandeh, S. (1995). Task analysis of laparoscopic surgery: Determination of requirements for endoscopic tool design. Abstracts 5th Annual IRIS/PRECARN Conference, Vancouver, Canada, June 1995.

Technical Reports (Total 11) 1. Luu, D. & Cao, C.G.L. (2010). Design and development of a robotic arm prototype for

needle insertion. Report EREL-010TR, July 2010. 2. Khawatmi, N., Cao, C.G.L. (2004). Digital vs. analogue displays for force application.

Report EREL-007TR, August 2004. 3. Perreault, J. & Cao, C.G.L. (2004). Force measurements in MIS. Report EREL-006TR,

August 2004. 4. Perreault, J., Rivera, C., Cao, C.G.L. (2004). Fibre optics and fluorophores. Report EREL-

005TR, December, 2003. 5. Cao, C.G.L., Waxberg, S. (2003). Role of landmark in spatial orientation in colonoscopy.

Report EREL-004TR, June 2003. 6. Webster, J., Cao, C.G.L. (2003). Effect of visual augmentation on laparoscopic and robotic

surgery skills. Report EREL-003TR, April 2003. 7. Webster, J., Cao, C.G.L. (2003). Comparison of hierarchical decomposition of robotic and

laparoscopic cholecystectomies. Report EREL-002TR, April 2003. 8. Cades, D., Cao, C.G.L. (2003). Effects of spatial maps in colonoscopy. Report EREL-

001TR, December, 2002. 9. Cao, C.G.L. (1990). Ergonomic analysis of glass-washing station in a chemistry laboratory. 10. Cao, C.G.L. (1989). Mono-dispersed coloured silica particles for toner applications. Report

for Xerox Research Centre of Canada, Mississauga, ON, December, 1989. 11. Cao, C.G.L. (1988). Electrophoretic properties of synthesised colloidal polystyrene. Report

for Xerox Research Centre of Canada, Mississauga, ON, December, 1988. Invited Presentations (Total 67) 1. Barn Gang, Dayton Engineers’ Club, Dayton Ohio, September 22, 2015. 2. Universite d’Evry Val d’Essonne, Evry, France, July 9, 2015. 3. Houston Methodist Hospital, Surgery Grand Rounds, January 28, 2015. 4. University of Toronto, MIE Seminar Series, November 28, 2014. 5. University of Toronto, HFIG Seminar, November 27, 2014. 6. Kettering College, Health Sciences Seminar, October 3, 2014. 7. Innovations in Medical and Surgical Education, presenter, Wright State University Boonshoft

School of Medicine, September 19, 2014. 8. Wright State University, Alumni College, presenter, August 2, 2014. 9. Wright State University Direct Admit Day, Keynote speaker, Dayton, OH, March 15, 2014.

Page 24: CAROLINE G. L. CAO, Ph.D. - people.wright.edupeople.wright.edu/sites/people.wright.edu/files/user-uploads/curriculum... · Caroline G.L. Cao, JAN 2016, p. 3of 27 Track co-chair, Technical

Caroline G.L. Cao, JAN 2016, p. 24 of 27

10. Wright State University E-Week and Celebration of Women in Engineering, Keynote speaker, Dayton, OH, February 21, 2014.

11. Innovation, Design, & Emerging Alliances in Surgery (IDEAS) Workshop, Beth Israel Deaconess Medical Center, Boston, MA, November 23, 2013.

12. The Australian e-Health Research Centre, CSIRO (Commonwealth Scientific and Industrial Research Organisation), Brisbane, Australia, August 2, 2013.

13. HFES, University of Queensland Chapter, July 27, 2012. 14. The Australian e-Health Research Centre, CSIRO (Commonwealth Scientific and Industrial

Research Organisation), Brisbane, Australia, July 25, 2012. 15. Research Colloquium, Department of Psychology, College of Math and Science, Wright

State University, Dayton, OH, USA, April 27, 2012. 16. Aptima, Inc. Dayton, OH, USA, March 22, 2012. 17. Ph.D. Seminar. College of Engineering and Computer Science, Wright State University,

Dayton, OH, USA, March 2, 2012. 18. Human Factors in Undergrad and Graduate Education. Office of Admissions, Tufts

University, Medford, MA, USA, September 9, 2011. 19. Human Factors Research in Endoscopic Surgery. Faculty of Medicine and Dentistry

seminar, University of Alberta, Edmonton, Calgary, Canada, May 2, 2011. 20. Human Factors Research in Endoscopic Surgery. Department of Biomedical Engineering,

Systems and Human Factors Engineering Seminar, Wright State University, Dayton, OH, April 8, 2011.

21. Human Factors Research and Development of Enabling Technology for Endoscopic Surgery. Presidential Seminar, Wright State University, Dayton, OH, October 21, 2010.

22. Research methods in human factors. Guest lecture in ASP Master’s Programme, l’Ecole Centrale de Nantes, Nantes, France, December 10, 2009.

23. Human factors issues in minimally invasive surgery. Institut National Des Sciences Appliquees de Lyon, Lyon, France, December 7, 2009.

24. Human factors in robotic surgery. Guest lecture in European Masters on Advanced Robotics (EMARO) Programme, l’Institut de Recherche en Communications et Cybernétique de Nantes, Nantes, France, November 26, 2009.

25. Design for data visualisation and navigation. Guest lecture in graduate HCI course at l’Ecole des Mines de Nantes, Nantes, France, October 13, 2009.

26. Technology Development for Minimally Invasive Surgery. NSF WIRES (Women’s International Research Engineering Summit), Barcelona, Spain, June 2-4, 2009.

27. Visuomotor Coordination in Endoscopic Surgery. Design of Medical Devices Conference 2009, Minneapolis, MN, April 14-16, 2009.

28. Human Factors Research in Robotic Surgery. L’Institut de Recherche en Communications et en Cybernétique de Nantes, and l’École des Mines de Nantes, Nantes, France, March 19, 2009.

29. Human Factors Research in Minimally Invasive Surgery. L’Institut des Systèmes Intelligents et de Robotique, Université Pierre et Marie Curie, Paris, France, March 13, 2009.

30. Fibre Optic Shape Tracking to Improve Inflammatory Bowel Disease Diagnosis. Broad Medical Foundation Principal Investigator Annual Meeting, Los Angeles, CA, February 13, 2009.

31. Human Factors Research in Minimally Invasive Surgery. Center for Ergonomics, Transportation Research Institute, University of Michigan, Ann Arbor, MI, May 5, 2008.

32. Improving Endoscopic Surgery Through Human Factors Engineering. Tufts University Alumni Visit. April 4, 2008.

33. Human Factors in Minimally Invasive Surgery. ASME Boston Section Meeting. Tufts University, March 25, 2008.

34. Research in Minimally Invasive Surgery. Biomedical Engineering Seminar Series. Tufts University, March 24, 2008.

Page 25: CAROLINE G. L. CAO, Ph.D. - people.wright.edupeople.wright.edu/sites/people.wright.edu/files/user-uploads/curriculum... · Caroline G.L. Cao, JAN 2016, p. 3of 27 Track co-chair, Technical

Caroline G.L. Cao, JAN 2016, p. 25 of 27

35. Research Considerations in Simulation Training. Establishing a Simulation and Skills Training Center: Comprehensive Educational Module. Harvard Medical School CME Course. Boston, MA, March 14-16, 2008.

36. Human Factors Principles in Design. Guest Lecture in ME 102 Inventive Design, Mechanical Engineering, Tufts University, March 6, 2008.

37. Haptics in Minimally Invasive Surgery. Engineering Research Center for Computer-Integrated Surgical Systems and Technologies Seminar Series. Johns Hopkins University, Baltimore, ME, February 27, 2008.

38. HF Research in Minimally Invasive Surgery. Ergonomics and Safety Research Group Seminar. Harvard School of Public Health, Boston, MA, December 7, 2007.

39. Implementation: Bring New Technologies to Clinical Use. Tufts University Research Days on Translational Research: Applying Discovery. Tufts University, Boston, MA, November 29, 2007.

40. Surgical Ergonomics and Patient Care. Mayo Clinic Conference on Human Factors in Health Care: Practical Applications to Improve Patient Safety. Mayo Clinic CME Course. St. Paul, MN, October 17-19, 2007.

41. Human Factors Research using Surgical Simulation. Experimental-OP und Ergonomie, Universitatsklinikum Tubingen, Tubingen, Germany, July 5, 2007.

42. Human Factors and Surgical Education. Simulator Hands-On Course: Establishing a Skills Program. Society of American Gastrointestinal and Endoscopic Surgeons Annual Meeting, Las Vegas, April 18-22, 2007.

43. Enabling Technology for Endoscopic Surgery. Alumni Campus Visit. Tufts University, March 30, 2007.

44. Adapting to Technology in Endoscopic Surgery. Tufts University School of Medicine and School of Engineering Alumni Event, Palo Alto, Computer History Museum, February 6, 2007.

45. Surgical Simulation Training. Tufts University School of Medicine and School of Engineering Alumni Event, Palo Alto, Computer History Museum, February 6, 2007.

46. Visualisation in Endoscopic Environments. Biomedical Informatics Seminar Series. Vanderbilt University, November 9, 2005.

47. Human Factors Research in Endoscopic Surgery. Patient Safety Seminar Series. Vanderbilt University Medical Centre, October 25, 2005.

48. Input/ Output Devices. Guest lecture in Computer Science Course CS 352: Human-Computer Interaction. Vanderbilt University, October 11, 2005.

49. HF in Information Display Design. Guest lecture in Mechanical Engineering. Tufts University, March 31, 2005.

50. Addressing Human Factors Issues in Endoscopic Surgery. Tufts University Biomedical Engineering Seminar Series. Tufts University, October 22, 2004.

51. Integration of Enabling Technology into the OR, and Beyond. Science Federation Forum on Human Factors and Patient Safety. The National Academy of Sciences, Washington, DC, October 15, 2004.

52. Human Factors Engineering in Robotics Academy Project. Tufts University Robotics Academy. Tufts University, October 13, 2004.

53. Addressing Human Factors Issues in Endoscopic Surgery. School of Engineering Seminar Series. University of Miami, August 27 2004.

54. Human Factors Research in Surgery: Adapting to Technology. Grand Rounds, Department of Anaesthesiology, Jackson Memorial Hospital, University of Miami, May 20, 2004.

55. Human Factors Research in Endoscopic Surgery. Dean’s Safety Colloquium, University of Miami, May 2004.

56. MR (Mixed-Reality) in the OR. Guest lecture in Biomedical Engineering. Tufts University, February 18, 2004.

Page 26: CAROLINE G. L. CAO, Ph.D. - people.wright.edupeople.wright.edu/sites/people.wright.edu/files/user-uploads/curriculum... · Caroline G.L. Cao, JAN 2016, p. 3of 27 Track co-chair, Technical

Caroline G.L. Cao, JAN 2016, p. 26 of 27

57. Human Factors Research in Surgery. Tufts University Dental School Colloquium. September 9, 2003.

58. Human Factors Engineering: Coupling People and Technology. Tufts University PCET Workshop, July 16, 2003.

59. Tufts University Usability Laboratory. All University Teaching and Research Conference, Tufts University, Grafton Campus. April 25, 2003.

60. Navigation and Orientation in Endoscopic Environments. MVL/HST/HFES Special Seminar, Department of Aeronautics and Aerospace, MIT. December 5, 2002.

61. What Does a Human Factors Engineer Do? Tufts University CSEMS Program Academic Speakers Series. November 20, 2002.

62. Navigation and Orientation in Non-Rigid Environments. Tufts University Department of Psychology Colloquium. March 14, 2002.

63. Human Factors in Endoscopy. Brock Rogers Surgical, Norwood, MA, February 15, 2002. 64. Human Factors in the Operating Room. Tufts University, Mechanical Engineering Seminar

Series. Medford, MA, November 28, 2001. 65. Orientation and navigation in endoscopy. Colloquium on Human Factors in the Operating

Room, the 43rd Annual Meeting of the Human Factors and Ergonomics Society. Houston, Texas, September 27- October 2, 1999.

66. Spatial visualisation in minimal access environments. Human Factors Interest Group Seminar Series, University of Toronto, March 24, 2000.

67. Orientation and navigation in minimally invasive surgery. Knowledge Media and Design Institute Seminar Series, University of Toronto, December 2, 1999.

Development of Educational Media & Textbook Chapter 1. MacKenzie, C.L. & Cao, C.G.L. Manipulation and remote manipulation in humans:

Implications for sensorimotor organisation in the human brain. Videotape (10 minutes) developed for International Symposium on Sensorimotor Representation in the Nervous System. In honour of Dr. Marcus Devanandan, Christian Medical College, Vellore, India, January 1997.

2. MacKenzie, C.L., Cao, C.G.L. & Ibbotson, J.L. Remote manipulation in laparoscopic surgery and the Virtual Hand Laboratory. Videotape (30 minutes) developed for Invited Dinner Address at the Industry Symposium on 3D Animation and 3D Interaction, Intel Corporation, Hillsboro, Oregon, December 1996.

3. Cao, C.G.L. & O’Leary, J. (2003). Prosthesis project. In Science Explorer: Human Biology and Health Series D. Prentice Hall, Needham, MA.

HONOURS RECEIVED BY STUDENTS 1. SPIE Optics and Photonics Education Scholarship, July 2015. 2. Outstanding Graduate Student Award, WSU College of Engineering and Computer Science,

May 2015. 3. First Prize Research Division, DAGMEC Research Symposium, Dayton, OH, 2013. 4. Graduate Student Research Award, Tufts University Graduate School of Arts & Sciences,

2011. 5. Best Presentation Award, New England Chapter Human Factors and Ergonomics Society,

2011. 6. Health Care Technical Group Best Student Paper Prize, Human Factors and Ergonomics

Society (HFES) Annual Conference, 2009. 7. Outstanding Graduate Researcher, Department of Mechanical Engineering, Tufts University,

2009. 8. Best Poster Award, Society of American Gastrointestinal Endoscopic Surgeons (SAGES),

2009.

Page 27: CAROLINE G. L. CAO, Ph.D. - people.wright.edupeople.wright.edu/sites/people.wright.edu/files/user-uploads/curriculum... · Caroline G.L. Cao, JAN 2016, p. 3of 27 Track co-chair, Technical

Caroline G.L. Cao, JAN 2016, p. 27 of 27

9. Best Poster Award, 2nd Place, Biomedical Devices Division, ASME, 2008. 10. Poster with Distinction Award, Society of American Gastrointestinal Endoscopic Surgeons

(SAGES), 2007. 11. Health Care Technical Group Best Student Paper Prize, Human Factors and Ergonomics

Society (HFES) Annual Conference, 2006. 12. Third Place Best Paper Prize, Surgical Resident Research Day at T-New England Medical

Centre, 2006. 13. Poster with Distinction Award, Society of American Gastrointestinal Endoscopic Surgeons

(SAGES), 2006. 14. Best Presentation Award, New England Chapter of Human Factors and Ergonomics

Society, 2005. 15. Best Presentation Award, New England Chapter of Human Factors and Ergonomics

Society, 2005. 16. Best Teaching Assistant Award, Department of Mechanical Engineering, Tufts University,

2005. 17. Graduate Student Research Award, Tufts University Graduate School of Arts & Sciences,

January 2003. 18. Graduate Student Research Award, Tufts University Graduate School of Arts & Sciences,

January 2003. 19. Best Research Assistant Award, Department of Mechanical Engineering, Tufts University,

2002.