carel - ultimate sam
DESCRIPTION
Carel - Ultimate SAM HumidifierTRANSCRIPT
ultimateSAM™
Assembled In The U.S.A.
ultimateSAM™
Assembled In The U.S.A.
The ultimateSAM offers “SHORT ABSORPTION steam systems for all uses”.
ultimateSAM™
Assembled In The U.S.A.
Short Steam Absorption is always guaranteed with our 3 Inch and 6 Inch center distance models.
ultimateSAM™
Assembled In The U.S.A.
No need to turn down any job that demands atmospheric steam supply!
Use it with almost any Carel Steam Humidifier.
ultimateSAM™
Assembled In The U.S.A.
With over 600 Frame SizesTo Choose From…
Each OrderIs Custom Fabricated In Our
Manheim, PA Factory
ultimateSAM™
Assembled In The U.S.A.
Bottom Feed Steam ModelsFrom
44 lbs./hr.To
814 lbs./hr.
ultimateSAM™
Assembled In The U.S.A.
Top Feed Steam ModelsFrom
132 lbs./hr.To
2442 lbs./hr.
ultimateSAM™
Assembled In The U.S.A.
Made with AISI 304 stainless steel for long life. Our patented uprights are sealed for lifetime use.
ultimateSAM™
Assembled In The U.S.A.
Our “Air Cushion” thermal insulation design minimizes heat gain between 2˚ & 4˚ F.
UltimateSAM™ is energy efficient
SupplySteam
Elongated dispersion nozzles made of pps Ryton, capture the pure dry steam from the supply uprights.
UltimateSAM™ is energy efficient
SupplySteam
Poly(p-phenylene sulfide) (PPS) is a polymer made up of alternating sulfur atoms and phenylene rings in a para substitution pattern. The highly stable chemical bonds of its molecular structure impart a remarkable degree of molecular stability toward both thermal degradation and chemical reactivity. The molecular structure also readily packs into a very thermally stable crystalline lattice, hence PPS is a semi-crystalline polymer with a high crystalline melting point of about 285°C (545°F). Because of its molecular structure, PPS also tends to char during combustion, making the material inherently flame retardant. PPS has not been found to dissolve in any solvent at temperatures below about 200°C (392°F).
Dry steam is channelled into the
air stream
Condensate falls down the inner wall and is drained or
aseptically converted to steam at the horizontal
manifold.
Channel steam from the inner
pipe
Disperse it into the air
Gravitydrain the
condensate
UltimateSAM™ is energy efficient
SupplySteam
Drier Steam & Reduced Condensate = Energy Efficiency
UltimateSAM™ is innovationWhy use Ryton® PPS?
For Nozzles?
• Dimensional & Thermal Stability• Chemical Resistance
• Non Flammability
UltimateSAM™ is innovationNozzle assembly
• Using a process known as “press fit” these nozzles are fit permanently on the pipe.
UltimateSAM™ is innovationNozzle assembly
• Each nozzle set is staggered to allow even steam flow.
UltimateSAM™ is versatilityWe offer 3 important styles of steam uprights.
• 1.5 inch O.D. tube with 6 inch center to center distance
• 1.75 inch O.D. tube with 6 inch center to center distance
• 1.5 inch O.D. tube with 3 inch center to center distance
UltimateSAM™ is energy efficient
Drier Steam & Reduced Condensate = Energy Efficiency
UltimateSAM™ is versatilityUse with Carel Steam Humidifiers
UltimateSAM™ is versatility
Single, Double, Quad, & Double Quad Connections
UltimateSAM™ is energy efficientSAB – bottom feed Series
• Available in 306 size combinations
• Maximum capacity – 814 lbs./ hour
• Steam Valves ( F&T) can be mounted internal or external to duct/air handling unit
• Available in 3” & 6” Centers Configuration
UltimateSAM™ is energy efficientSAT – top feed Series
• Available in 306 size combinations
• Maximum capacity – 2442 lbs./ hour
• Steam Valves ( F&T) can be mounted internal or external to duct/air handling unit
• Available in 3” & 6” Centers Configuration
UltimateSAM™ is energy efficient
• Production Pre-Pilot USA – January 2012
• Literature, Catalogs and IOM’s NOW
• Start working with Engineers NOW
ultimateSAM™