cardale garage door range price list and technical ......garage doors should be inspected upon...
TRANSCRIPT
1
Cardale Garage Door RangePrice List and Technical InformationJune 2019
www.cardale.co.uk
G A R A G E D O O R S
2 3
Welcome to Cardale Garage Doors General information
Welcome to our 2019 garage door price list, containing an inspirational range of high quality doors.
Cardale is British owned and we have been manufacturing garage doors for over fifty years. We are sure you’ll find exactly the right door for your home amongst Cardale’s range - no one offers more choice!
These doors represent the best, not only in looks, but also in terms of safety, security and durability. We at Cardale have no doubt that, in years to come, you will still be as happy with your Cardale door as the day it is installed.
Factory finished steel fixing frameCardale Up & Over garage doors are supplied with an optional pre-hung factory finished steel fixing frame, which makes installation simple and eliminates the need for a timber frame.
Frames are supplied as standard in white, colour matched frames are also available .
The Rosewood chassis frame is supplied in Cherry - Master Chroma 3353, Golden Oak chassis frame is RAL 8003.
Where to buyvisit www.cardale.co.uk
Cardale doors are available through a network of garage door specialists who will be able to provide full details and prices for our range.
Visit www.cardale.co.uk or call 01582 563777 for details of your nearest distributor.
Information for all doorsAll products are sold subject to our standard conditions of sale, which are available on request and include the following:
PricesAll orders are accepted on the understanding that the goods will be subject to the prices ruling at the time of delivery, unless other terms are specifically agreed. All prices are in £ sterling and exclude carriage and VAT.
Panel ConfigurationsThe proportions of the door’s panel configurations may vary according to the actual size specified.
Lock Handle PositionLock handle position varies according to the design and the lifting gear type. Lock holes are supplied as standard on up & over, side hinged and Steeline Roller doors unless specified at the time of order.
Made to measure doorsDoors can be ordered in 1/2" increments.
Door diagramsSingle door diagrams shown depict 7'0" x 7'0" doors. Double door diagrams shown depict 14’0” x 7’0” doors
SpecificationThe Company reserves the right to make any alterations in design or manufacture without notification as is deemed necessary to ensure continual product development.
Timber doorsThe Company accepts no liability for natural variations in colour, warping, swelling or shrinkage due to ordinary natural processes of ageing, fading or the effects of weather or climate or shrinkage, warping or swelling which could have been prevented by carrying out finishing and maintenance as recommended by the Company.
All doors in the Futura and Heritage ranges are supplied with a two coat factory base coat stain treatment. These doors should be finished with a micro-porous stain, front and back, in accordance with the stain manufacturer’s instructions immediately after fitting.
Prior to fitting they must not be stored in direct sunlight or exposed to splashes or rain as colour fading and staining may occur respectively. Fully finished timber doors should be re-stained approximately every four years, regular inspections should be carried out and this period reduced as necessary.
Please note that timber is a beautiful material with naturally occurring colour and grain variations. Please tell us if you require matching pairs as we will do our best to match both doors.
GRP doorsGRP by definition, is manufactured from translucent strands of glass. This characteristic may occasionally show itself in translucency of the panel under bright external conditions when viewed from inside with the door closed, but this does not represent a defect in the construction or strength of the door.
Please note that our GRP doors are handcrafted. This may result in shade variations. Please tell us if you require doors to match and we will do our best to achieve as close a door match as possible.
Side hinged doors and Personnel doorsAll doors will be supplied with locking and lock holes unless specified otherwise on order.
Thermaglide roller doorsDue to manufacturing processes the bottom lath and guides may vary in colour from the rest of the door. Your door will be Made to Measure to suit the dimensions given.
Delivery charges, all doorsDelivery charges per door: 1 Door = £69.00 NETT. 2 Doors = £54.00 (each door) NETT. 3 Doors + = £15.00 (each door NETT)*.Mainland England, Scotland and Wales only*. Northern Ireland, Channel Islands, Isle of Man, and export delivery – charges on application. Carriage charges and VAT to be added to all prices. *Additional charges may be applied to remote rural locations - please contact Cardale for details.
Product appearanceGarage doors should be inspected upon delivery and viewed in natural daylight (not direct sunlight) from a standard distance of 3 metres to view their overall appearance. From this distance the door panel should appear free from visible marks or distortion, stains, blemishes, indentations or scuffs.
StorageGarage doors should be stored in their original packaging standing upright on flat ground. Avoid placing on stony or uneven surfaces. Doors should always be lifted and not dragged into place. Do not rest doors against each other without first placing protective packaging in between. Install as soon as possible once the goods have arrived on site.
ContentsSteel up & over doors ....................................................................... 4-11
Golden Oak and Rosewood up & over doors .................... 12-17
Steel Secured by Design doors ................................................. 18-19
Steel Side Hinged doors ................................................................ 20-21
Steel Side Hinged Golden Oak and Rosewood ................ 22-23
Steel Personnel doors ................................................................... 24-25
Timber up & over doors .............................................................. 26-36
Timber Secured by Design doors .................................................... 37
Timber Side Hinged doors ........................................................... 38-40
GRP up & over doors .................................................................... 41-43
GRP Side Hinged and Personnel doors .................................... 44
ABS doors .................................................................................................... 45
Steeline roller doors .............................................................................. 46
Insulated aluminium roller doors ................................................. 47
Insulated sectional doors ........................................................... 48-53
DuoPort Insulated 45mm Side Hinged Garage doors 54-55
Sectional door options .......................................................................... 56
Technical data ................................................................................... 57-73
Warranty, Terms and Conditions ............................................. 74-75
2
Care and maintenance, all doorsPeriodically clean the door panel using warm water and a soft cloth or sponge before allowing to dry naturally. Never use detergent, abrasive, caustic or solvent based cleaners as they may damage the door surface.External influences such as fire, salts, water, acids, alkaline solutions, abnormal environmental influences are not covered by the warranty.
Bird droppings should be removed immediately as these can be particularly caustic.
All doors should be operated and maintained in line with manufacturer’s instructions - see operating and maintenance instructions supplied with your door. For further copies visit www.cardale.com.
Bespoke made to order doorsSteel door prices in bold shown on pages 4, 5 & 6 are stock doors on a standard lead time in white. All other sizes are made to measure.
The designs & sizes detailed in this brochure are an indication of price for the design & size required. Your right to cancel is not available on non-standard made to order doors.
4 5
Standard size single doorsPre-finished white
Size mm (ft/in)Width by Height C R C R C R C R C R
1981 x 1981 (6'6" x 6'6") - - 973 1034 844 905 - - 587 648
1981 x 2134 (6'6" x 7'0") - - 973 1034 844 905 - - 587 648
2083 x 1905 (6'10" x 6'3") - - 973 1034 844 905 - - 587 648
2083 x 1930 (6'10" x 6'4") - - 973 1034 844 905 - - 587 648
2083 x 1956 (6'10" x 6'5") - - 973 1034 844 905 - - 587 648
2083 x 1981 (6'10" x 6'6") - - 973 1034 844 905 - - 587 648
2108 x 1981 (6'11" x 6'6") 1164 1225 973 1034 844 905 - - 587 648
2108 x 2134 (6'11" x 7'0") 1164 1225 973 1034 844 905 - - 587 648
2134 x 1828 (7'0" x 6'0") 1164 1225 973 1034 - - - - 587 648
2134 x 1880 (7'0" x 6'2") 1164 1225 973 1034 844 905 - - 587 648
2134 x 1905 (7'0" x 6'3") 1164 1225 973 1034 844 905 - - 587 648
2134 x 1930 (7'0" x 6'4") 1164 1225 973 1034 844 905 - - 587 648
2134 x 1981 (7'0" x 6'6") 1164 1225 973 1034 844 905 684 746 587 648
2134 x 2134 (7'0" x 7'0") 1170 1231 1022 1083 891 954 747 808 636 697
2210 x 1930 (7'3" x 6'4") 1207 1268 1022 1083 954 1015 - - 670 731
2261 x 1981 (7'5" x 6'6") 1207 1268 1022 1083 954 1015 - - 670 731
2261 x 2134 (7'5" x 7'0") 1207 1268 1022 1083 954 1015 - - 670 731
2286 x 1828 (7'6" x 6'0") 1207 1268 1022 1083 954 1015 - - 670 731
2286 x 1905 (7'6" x 6'3") 1207 1268 1022 1083 954 1015 - - 670 731
2286 x 1981 (7'6" x 6'6") 1207 1268 1022 1083 954 1015 869 808 670 731
2286 x 2134 (7'6" x 7'0") 1211 1272 1022 1083 1115 1176 820 881 766 827
2438 x 1905 (8'0" x 6'3") 1277 1338 1129 1189 1139 1201 - - 773 834
2438 x 1930 (8'0" x 6'4") 1277 1338 1129 1189 1139 1201 - - 773 834
2438 x 1981 (8'0" x 6'6") 1277 1338 1129 1189 1139 1201 - - 773 834
2438 x 2134 (8'0" x 7'0") 1281 1342 1129 1189 1218 1277 - - 788 850
2743 x 1981 (9’0" x 6’6") - - - 1245 - 1390 - - - -
2743 x 2134 (9’0" x 7’0") - - - 1245 - 1390 - - - -
2896 x 1981 (9'6" x 6'6") - - - 1373 - 1513 - - - -
2896 x 2134 (9’6" x 7’0") - - - 1373 - 1513 - - - -
3048 x 1981 (10’0" x 6’6") - - - 1411 - 1634 - - - -
3048 x 2134 (10’0" x 7’0") - - - 1411 - 1634 - - - -
Standard size single doorsPre-finished white
Size mm (ft/in)Width by Height C R C R C R C R
1981 x 1981 (6'6" x 6'6") 973 1034 684 746 844 905 698 759
1981 x 2134 (6'6" x 7'0") 973 1034 684 746 - - - -
2083 x 1905 (6'10" x 6'3") 973 1034 684 746 844 905 698 759
2083 x 1930 (6'10" x 6'4") 973 1034 684 746 844 905 698 759
2083 x 1956 (6'10" x 6'5") 973 1034 684 746 844 905 698 759
2083 x 1981 (6'10" x 6'6") 973 1034 684 746 844 905 698 759
2108 x 1981 (6'11" x 6'6") 973 1034 684 746 844 905 698 759
2108 x 2134 (6'11" x 7'0") 973 1034 684 746 - - 698 759
2134 x 1828 (7'0" x 6'0") 973 1034 684 746 - - 698 759
2134 x 1880 (7'0" x 6'2") 973 1034 684 746 - - 698 759
2134 x 1905 (7'0" x 6'3") 973 1034 684 746 844 905 698 759
2134 x 1930 (7'0" x 6'4") 973 1034 684 746 844 905 698 759
2134 x 1981 (7'0" x 6'6") 973 1054 684 746 844 905 698 759
2134 x 2134 (7'0" x 7'0") 1022 1083 747 808 954 1015 801 862
2210 x 1930 (7'3" x 6'4") 1022 1083 747 808 954 1015 801 862
2261 x 1981 (7'5" x 6'6") 1022 1083 747 808 954 1015 801 862
2261 x 2134 (7'5" x 7'0") 1022 1083 747 808 - - 801 862
2286 x 1828 (7'6" x 6'0") 1022 1083 747 808 - - 801 862
2286 x 1905 (7'6" x 6'3") 1022 1083 747 808 954 1015 801 862
2286 x 1981 (7'6" x 6'6") 1022 1083 820 881 1115 1176 895 956
2286 x 2134 (7'6" x 7'0") 1129 1190 880 941 - - 949 1010
2438 x 1905 (8'0" x 6'3") 1129 1190 880 941 1157 1218 949 1010
2438 x 1930 (8'0" x 6'4") 1129 1190 880 941 1157 1218 949 1010
2438 x 1981 (8'0" x 6'6") 1129 1190 917 978 1157 1218 986 1048
2438 x 2134 (8'0" x 7'0") - - - 1157 - 1457 - -
2743 x 1981 (9’0" x 6’6") - - - 1157 - 1457 - -
2743 x 2134 (9’0" x 7’0") - - - 1277 - 1672 - -
2896 x 1981 (9'6" x 6'6") - - - 1277 - 1672 - -
2896 x 2134 (9’6" x 7’0") - - - 1383 - 1745 - -
3048 x 1981 (10’0" x 6’6") - - - 1383 - 1745 - -
3048 x 2134 (10’0" x 7’0") - - - 1356 - 1711 - -
Bedford GatcombeBerkeley Vertical GeminiBrompton GeorgianChevron HavenEuropa II
Cardale powder coated pre-finished single steel doors Cardale powder coated pre-finished single steel doors
Steel door prices highlighted in bold are stock doors on a standard lead time available in white only. All other sizes and prices are non stock doors made to specific requirements.
Steel door prices highlighted in bold are stock doors on a standard lead time available in white only. All other sizes and prices are non stock doors made to specific requirements.
STEEL SINGLE UP & OVER DOORS
Minimum width 2083 2083 1981 1981 1981 1981 1981 1981 1981 1981
Maximum width 2438 2438 2438 3048 2438 3048 2438 2438 2438 3048
Minimum height 1829 1860 1829 1860 1868 1868 1829 1860 1829 1860
Maximum height 2134 2286 2134 2286 2181 2181 2134 2286 2134 2286
Size availability (mm) for Made to Measure doors
Minimum width 1981 1981 1981 1981 1981 1981 1981 1981
Maximum width 2438 2438 2438 3048 2438 3048 2438 2438
Minimum height 1829 1860 1829 1860 1914 1914 1860 1880
Maximum height 2134 2286 2134 2286 2158 2158 2134 2286
Size availability (mm) for Made to Measure doors
C = Canopy gear, R = Retractable gear C = Canopy gear, R = Retractable gear
Made to Measure doors add £166 Made to Measure doors add £166
For Steel Up & Over Door options see page 7 For Steel Up & Over Door options see page 7
6 7
Standard size single doorsPre-finished white
Size mm (ft/in)Width by Height C R C R C R C R C R
1981 x 1981 (6'6" x 6'6") 844 905 895 956 844 905 1180 1241 818 879
1981 x 2134 (6'6" x 7'0") 844 905 895 956 844 905 1180 1241 818 879
2083 x 1905 (6'10" x 6'3") 844 905 895 956 844 905 1180 1241 818 879
2083 x 1930 (6'10" x 6'4") 844 905 895 956 844 905 1180 1241 818 879
2083 x 1956 (6'10" x 6'5") 844 905 895 956 844 905 1180 1241 818 879
2083 x 1981 (6'10" x 6'6") 844 905 895 956 844 905 1180 1241 818 879
2108 x 1981 (6'11" x 6'6") 844 905 895 956 844 905 1180 1241 818 879
2108 x 2134 (6'11" x 7'0") 844 905 895 956 844 905 1180 1241 818 879
2134 x 1828 (7'0" x 6'0") 844 905 895 956 - - - - 818 879
2134 x 1880 (7'0" x 6'2") 844 905 895 956 844 905 1180 1241 818 879
2134 x 1905 (7'0" x 6'3") 844 905 895 956 844 905 1180 1241 818 879
2134 x 1930 (7'0" x 6'4") 844 905 895 956 844 905 1180 1241 818 879
2134 x 1981 (7'0" x 6'6") 844 905 895 956 844 905 1180 1241 818 879
2134 x 2134 (7'0" x 7'0") 891 953 945 1006 891 953 1228 1289 842 903
2210 x 1930 (7'3" x 6'4") 954 1015 1010 1071 954 1015 1288 1349 945 1006
2261 x 1981 (7'5" x 6'6") 954 1015 1010 1071 954 1015 1288 1349 945 1006
2261 x 2134 (7'5" x 7'0") 954 1015 1010 1071 954 1015 1288 1349 945 1006
2286 x 1828 (7'6" x 6'0") 954 1015 1010 1071 - - - - 945 1006
2286 x 1905 (7'6" x 6'3") 954 1015 1010 1071 954 1015 1288 1349 945 1006
2286 x 1981 (7'6" x 6'6") 954 1015 1010 1071 954 1015 1288 1349 945 1006
2286 x 2134 (7'6" x 7'0") 1115 1176 1181 1242 1115 1176 1451 1513 945 1007
2438 x 1905 (8'0" x 6'3") 1139 1201 1209 1270 1157 1218 1494 1554 1007 1068
2438 x 1930 (8'0" x 6'4") 1139 1201 1209 1270 1157 1218 1493 1554 1007 1068
2438 x 1981 (8'0" x 6'6") 1139 1201 1209 1270 1157 1218 1493 1554 1007 1068
2438 x 2134 (8'0" x 7'0") 1218 1277 1289 1352 1157 1218 1493 1554 1042 1105
2743 x 1981 (9’0" x 6’6") - - - 1509 - 1245 - 1946 - 1475
2743 x 2134 (9’0" x 7’0") - - - 1509 - 1245 - 1946 - 1475
2896 x 1981 (9'6" x 6'6") - - - 1725 - 1756 - 2160 - 1537
2896 x 2134 (9’6" x 7’0") - - - 1725 - 1756 - 2160 - 1537
3048 x 1981 (10’0" x 6’6") - - - 1799 - 1305 - 2234 - 1598
3048 x 2134 (10’0" x 7’0") - - - 1799 - 1305 - 2234 - 1598
Orion Horizontal Orion Vertical Sheraton II Sheraton II glazed Vogue
Cardale powder coated pre-finished single steel doors
Steel door prices highlighted in bold are stock doors on a standard lead time available in white only. All other sizes and prices are non stock doors made to specific requirements.
C = Canopy gear, R = Retractable gear
STEEL SINGLE UP & OVER DOORS
Minimum width 1981 1981 1981 1981 1981 1981 1981 1981 1981 1981
Maximum width 2438 2438 2438 2438 2438 3048 2438 3048 2438 3048
Minimum height 1829 1860 1829 1860 1868 1868 1868 1868 1829 1860
Maximum height 2134 2286 2134 2286 2181 2181 2181 2181 2134 2286
Size availability (mm) for Made to Measure doors
STEEL SINGLE UP & OVER DOORS - OPTIONS
Made to Measure doors add £166
For Steel Up & Over Door options see page 7
Cardale powder coated pre-finished steel single doors - OPTIONS
Steel doors including windows.The standard colour window frame for white doors is white. For non-white coloured doors and for Rosewood and Golden Oak laminated doors the window frame colour will be black. Colour matched window frames are available but must be specified at time of order.Colour matched window frames (except Bedford) add £34 per window Colour matched window frames for Bedford add £134 per doorPrices applicable to all available heights (made to measure doors only).
Steel up & over single door optionsStandard frame add £127
Coloured frame add £174
Cardale DC650T operator add £488
Cardale DC800T operator add £633
Glazing (Bedford) add £153 (Stippled) Black mock glazing standardGlazing (Brompton) add £323
Glazing (Georgian) add £323
Painted door add £81 (White) add £115 (Colours)
Optional extras for operatorsExtra handsets add £74 (2 channel) add £82 (4 channel)
Wireless key pad add £202
External manual override add £46
Keyswitch add £49
Frames ordered with a double door will be supplied as a separate knocked down item.
All steel up & over doors are bespoke and made to order.
Colours available for steel doors: RAL 7038 Ageta Grey RAL 7016 Anthracite Grey RAL 6005 Balmoral Green RAL 8017 Conker Brown RAL 9011 Graphite Black RAL 9004 Signal Black RAL 9005 Ebony Black RAL 7035 Light Grey RAL 5013 Oxford Blue RAL 5011 Midnight Blue RAL 3003 Monarch Red RAL 3009 Oxide Red RAL 8003 Signal Brown RAL 7004 Signal Grey RAL 5024 Pastel Blue RAL 6009 Fir Green RAL 6013 Reed Green BS4800-14C35 Chartwell Green BS4800-12B17 Willow Green BS381-420 Dark Camouflage Desert Sand BS381-389 Camouflage Beige Cherry - Master Chroma 3353
Cardale doors are supplied white RAL 9016 as standard.
8 9
Cardale powder coated pre-finished double steel doors
Standard size double doorsPre-finished white
Size mm (ft/in)Width by Height R R R
3200 x 1981 (10'6" x 6'6") 1473 1546 1743
3200 x 2134 (10’6" x 7’0") 1473 1546 1743
3353 x 1981 (11’0" x 6’6") 1508 1581 1800
3353 x 2134 (11’0" x 7’0") 1508 1581 1800
3505 x 1981 (11’6" x 6’6") 1554 1854 1854
3505 x 2134 (11’6" x 7’0") 1554 1854 1854
3658 x 1981 (12’0" x 6’6") 1594 1910 1910
3658 x 2134 (12’0" x 7’0") 1594 1910 1910
3810 x 1981 (12’6" x 6’6") 1634 1715 1967
3810 x 2134 (12’6" x 7’0") 1634 1715 1967
3962 x 1981 (13’0" x 6’6") 1674 1756 2130
3962 x 2134 (13’0" x 7’0") 1674 1756 2130
4115 x 1981 (13’6" x 6’6") 1715 1799 2130
4115 x 2134 (13’6" x 7’0") 1715 1799 2130
4267 x 1981 (14’0" x 6’6") 1573 1573 1968
4267 x 2134 (14’0" x 7’0") 1573 1573 1968
4420 x 1981 (14’6" x 6’6") 1767 1853 2171
4420 x 2134 (14’6" x 7’0") 1767 1853 2171
4572 x 1981 (15’0" x 6’6") 1807 1896 2199
4572 x 2134 (15’0" x 7’0") 1807 1896 2199
4877 x 1981 (16’0" x 6’6") 1847 1938 2538
4877 x 2134 (16’0" x 7’0") 1847 1938 2538
Europa II Gemini Georgian
R = Retractable gear.
STEEL DOUBLE UP & OVER DOORS
Minimum width 3049 2439 2439
Maximum width 4267 4877 4877
Minimum height 1880 1880 1930
Maximum height 2286 2286 2158
Size availability (mm) for Made to Measure doors
Made to Measure doors add £247
For Steel Up & Over Door options see page 11
Cardale powder coated pre-finished double steel doors
Standard size double doorsPre-finished white
Size mm (ft/in)Width by Height R R R R
3200 x 1981 (10'6" x 6'6") 1743 1394 1659 -
3200 x 2134 (10’6" x 7’0") 1743 1394 1659 -
3353 x 1981 (11’0" x 6’6") 1800 1441 1713 -
3353 x 2134 (11’0" x 7’0") 1800 1441 1713 -
3505 x 1981 (11’6" x 6’6") 1854 1484 1766 -
3505 x 2134 (11’6" x 7’0") 1854 1484 1766 -
3658 x 1981 (12’0" x 6’6") 1910 1529 1819 -
3658 x 2134 (12’0" x 7’0") 1910 1529 1819 -
3810 x 1981 (12’6" x 6’6") 1967 1573 1872 -
3810 x 2134 (12’6" x 7’0") 1967 1573 1872 -
3962 x 1981 (13’0" x 6’6") - 1844 2025 -
3962 x 2134 (13’0" x 7’0") - 1844 2049 -
4115 x 1981 (13’6" x 6’6") - 1844 2025 -
4115 x 2134 (13’6" x 7’0") - 1844 2049 -
4267 x 1981 (14’0" x 6’6") 2304 1844 1792 2412
4267 x 2134 (14’0" x 7’0") 2304 1844 1792 2412
4420 x 1981 (14’6" x 6’6") 2420 2165 1946 -
4420 x 2134 (14’6" x 7’0") 2420 2165 1946 -
4572 x 1981 (15’0" x 6’6") 2536 2221 2171 -
4572 x 2134 (15’0" x 7’0") 2536 2221 2199 -
4877 x 1981 (16’0" x 6’6") 2766 2310 2510 -
4877 x 2134 (16’0" x 7’0") 2766 2310 2538 -
Bedford* Berkeley Vertical Brompton Chevron
R = Retractable gear
Minimum width - 3049 2439 -
Maximum width - 4877 4877 -
Minimum height - 1880 1880 -
Maximum height - 2286 2193 -
Size availability (mm) for Made to Measure doors
Made to Measure doors add £247
*Bedford doors below 12’ 6” are produced with 3 panels
For Steel Up & Over Door options see page 11
10 11
STEEL DOUBLE UP & OVER DOORS
Cardale powder coated pre-finished double steel doors
Standard size double doorsPre-finished white
Size mm (ft/in)Width by Height R R R R
3200 x 1981 (10'6" x 6'6") 1743 1797 1743 2232 1800
3200 x 2134 (10’6" x 7’0") 1743 1797 1743 2232 1800
3353 x 1981 (11’0" x 6’6") 1800 1853 1800 2289 2002
3353 x 2134 (11’0" x 7’0") 1800 1853 1800 2289 2002
3505 x 1981 (11’6" x 6’6") 1854 1908 1854 2344 2051
3505 x 2134 (11’6" x 7’0") 1854 1908 1854 2344 2051
3658 x 1981 (12’0" x 6’6") 1910 1965 1910 2400 2101
3658 x 2134 (12’0" x 7’0") 1910 1965 1910 2400 2101
3810 x 1981 (12’6" x 6’6") 1967 2021 1967 2455 2162
3810 x 2134 (12’6" x 7’0") 1967 2021 1967 2455 2162
3962 x 1981 (13’0" x 6’6") 2130 2183 2130 2619 2230
3962 x 2134 (13’0" x 7’0") 2130 2183 2130 2619 2230
4115 x 1981 (13’6" x 6’6") 2130 2183 2130 2619 2357
4115 x 2134 (13’6" x 7’0") 2130 2183 2130 2619 2357
4267 x 1981 (14’0" x 6’6") 2304 2304 1792 2282 2049
4267 x 2134 (14’0" x 7’0") 2304 2304 1792 2282 2049
4420 x 1981 (14’6" x 6’6") 1946 2000 1946 2435 2487
4420 x 2134 (14’6" x 7’0") 1946 2000 1946 2435 2487
4572 x 1981 (15’0" x 6’6") 2199 2252 2199 2688 2542
4572 x 2134 (15’0" x 7’0") 2199 2252 2199 2688 2542
4877 x 1981 (16’0" x 6’6") 2538 2591 2538 3026 2801
4877 x 2134 (16’0" x 7’0") 2538 2591 2538 3026 2801
Orion Horizontal Orion Vertical Sheraton II VogueSheraton II glazed
R = Retractable gear.
Minimum width - - 2439 2439 2439
Maximum width - - 4877 4877 4877
Minimum height - - 1880 1880 1880
Maximum height - - 2134 2134 2286
Size availability (mm) for Made to Measure doors
Made to Measure doors add £247
For Steel Up & Over Door options see page 11
Steel up & over double doors - optionsStandard frame add £183
Coloured frame add £345
Cardale DC650T operator add £488
Cardale DC800T operator add £633
Glazing (Brompton & Georgian) add £642
Painted door add £122 (White) add £178 (Colours)
Steel doors including windows.The standard colour window frame for white coloured doors is white. For non-white coloured doors and for Rosewood and Golden Oak laminated doors the window frame colour will be black.Colour matched window frames are available but must be specified at time of order.
Colour matched window frames (except Bedford) add £345 per window
Colour matched window frames for Bedford add £258 per door
Optional extras for operatorsExtra handsets add £74 (2 channel) add £82 (4 channel)
Wireless key pad add £202
External manual override add £46
Keyswitch add £49
Frames ordered with a double door will be supplied as a separate knocked down item.
All steel up & over doors are bespoke and made to order.
Colours available for steel doors: RAL 7038 Ageta Grey RAL 7016 Anthracite Grey RAL 6005 Balmoral Green RAL 8017 Conker Brown RAL 9011 Graphite Black RAL 9004 Signal Black RAL 9005 Ebony Black RAL 7035 Light Grey RAL 5013 Oxford Blue RAL 5011 Midnight Blue RAL 3003 Monarch Red RAL 3009 Oxide Red RAL 8003 Signal Brown RAL 7004 Signal Grey RAL 5024 Pastel Blue RAL 6009 Fir Green RAL 6013 Reed Green BS4800-14C35 Chartwell Green BS4800-12B17 Willow Green BS381-420 Dark Camouflage Desert Sand BS381-389 Camouflage Beige Cherry - Master Chroma 3353
Cardale doors are supplied white RAL 9016 as standard.
Cardale powder coated pre-finished steel double doors - OPTIONS
STEEL DOUBLE UP & OVER DOORS - OPTIONS
12 13
Standard size single doorsGolden Oak or Rosewood finished
Size mm (ft/in)Width by Height C R C R C R C R C R
1981 x 1981 (6'6" x 6'6") - - 1337 1398 760 821 1337 1398 857 918
1981 x 2134 (6'6" x 7'0") - - 1337 1398 760 821 1337 1398 857 918
2083 x 1905 (6'10" x 6'3") - - 1337 1398 760 821 1337 1398 857 918
2083 x 1930 (6'10" x 6'4") - - 1337 1398 760 821 1337 1398 857 918
2083 x 1956 (6'10" x 6'5") - - 1337 1398 760 821 1337 1398 857 918
2083 x 1981 (6'10" x 6'6") - - 1337 1398 760 821 1337 1398 857 918
2108 x 1981 (6'11" x 6'6") 1337 1398 1337 1398 760 821 1337 1398 857 918
2108 x 2134 (6'11" x 7'0") 1337 1398 1337 1398 760 821 1337 1398 857 918
2134 x 1828 (7'0" x 6'0") 1337 1398 1337 1398 760 821 1337 1398 857 918
2134 x 1880 (7'0" x 6'2") 1337 1398 1337 1398 760 821 1337 1398 857 918
2134 x 1905 (7'0" x 6'3") 1337 1398 1337 1398 760 821 1337 1398 857 918
2134 x 1930 (7'0" x 6'4") 1337 1398 1337 1398 760 821 1337 1398 857 918
2134 x 1981 (7'0" x 6'6") 1337 1398 1337 1398 760 821 1337 1398 857 918
2134 x 2134 (7'0" x 7'0") 1345 1407 1345 1407 810 871 1345 1345 877 938
2210 x 1930 (7'3" x 6'4") 1380 1441 1380 1441 844 905 1380 1441 922 983
2261 x 1981 (7'5" x 6'6") 1380 1441 1380 1441 844 905 1380 1441 922 983
2261 x 2134 (7'5" x 7'0") 1380 1441 1380 1441 844 905 1380 1441 922 983
2286 x 1828 (7'6" x 6'0") 1380 1441 1380 1441 844 905 1380 1441 922 983
2286 x 1905 (7'6" x 6'3") 1380 1441 1380 1441 844 905 1380 1441 922 983
2286 x 1981 (7'6" x 6'6") 1380 1441 1380 1441 844 905 1380 1441 922 983
2286 x 2134 (7'6" x 7'0") 1385 1446 1385 1446 939 1009 1385 1446 993 1055
2438 x 1905 (8'0" x 6'3") 1470 1530 1454 1515 948 1009 1454 1515 1055 1116
2438 x 1930 (8'0" x 6'4") 1470 1530 1454 1515 948 1009 1454 1515 1055 1116
2438 x 1981 (8'0" x 6'6") 1470 1530 1454 1515 948 1009 1454 1515 1055 1116
2438 x 2134 (8'0" x 7'0") 1473 1534 1455 1516 935 997 1455 1516 1091 1153
2743 x 1981 (9’0" x 6’6") - - - 1750 - 1783 - - - 1377
2743 x 2134 (9’0" x 7’0") - - - 1750 - 1783 - - - 1377
2896 x 1981 (9'6" x 6'6") - - - 1750 - 1938 - - - 1532
2896 x 2134 (9’6" x 7’0") - - - 1750 - 1938 - - - 1532
3048 x 1981 (10’0" x 6’6") - - - 1750 - 2091 - - - 1588
3048 x 2134 (10’0" x 7’0") - - - 1750 - 2091 - - - 1588
Standard size single doorsGolden Oak or Rosewood finished
Size mm (ft/in)Width by Height C R C R C R C R C R
1981 x 1981 (6'6" x 6'6") 1020 1081 824 885 915 976 970 1031 989 1051
1981 x 2134 (6'6" x 7'0") 1020 1081 824 885 915 976 970 1031 989 1051
2083 x 1905 (6'10" x 6'3") - - 824 885 915 976 970 1031 989 1051
2083 x 1930 (6'10" x 6'4") 1020 1081 824 885 915 976 970 1031 989 1051
2083 x 1956 (6'10" x 6'5") 1020 1081 824 885 915 976 970 1031 989 1051
2083 x 1981 (6'10" x 6'6") 1020 1081 824 885 915 976 970 1031 989 1051
2108 x 1981 (6'11" x 6'6") 1020 1081 824 885 915 976 970 1031 989 1051
2108 x 2134 (6'11" x 7'0") 1020 1081 824 885 915 976 970 1031 989 1051
2134 x 1828 (7'0" x 6'0") 1020 1081 824 885 915 976 970 1031 989 1051
2134 x 1880 (7'0" x 6'2") 1020 1081 824 885 915 976 970 1031 989 1051
2134 x 1905 (7'0" x 6'3") - - 824 885 915 976 970 1031 989 1051
2134 x 1930 (7'0" x 6'4") 1020 1081 824 885 915 976 970 1031 989 1051
2134 x 1981 (7'0" x 6'6") 1020 1081 824 885 915 976 970 1031 989 1051
2134 x 2134 (7'0" x 7'0") 1067 1128 901 962 1001 1062 1061 1122 1018 1079
2210 x 1930 (7'3" x 6'4") 1128 1189 920 981 1022 1083 1083 1144 1119 1180
2261 x 1981 (7'5" x 6'6") 1128 1189 920 945 1022 1083 1083 1144 1119 1180
2261 x 2134 (7'5" x 7'0") 1128 1189 920 981 1022 1083 1083 1144 1119 1180
2286 x 1828 (7'6" x 6'0") 1128 1189 920 981 1022 1083 1083 1144 1119 1180
2286 x 1905 (7'6" x 6'3") - - 920 981 1022 1083 1083 1144 1119 1180
2286 x 1981 (7'6" x 6'6") 1128 1189 920 981 1022 1083 1083 1144 1119 1180
2286 x 2134 (7'6" x 7'0") 1288 1349 1010 1071 1120 1181 1187 1248 1119 1180
2438 x 1905 (8'0" x 6'3") - - 1061 1122 1177 1238 1248 1310 1179 1240
2438 x 1930 (8'0" x 6'4") 1331 1392 1061 1122 1177 1238 1248 1310 1179 1240
2438 x 1981 (8'0" x 6'6") 1331 1392 1061 1122 1177 1238 1248 1310 1179 1240
2438 x 2134 (8'0" x 7'0") 1331 1392 1095 1157 1218 1277 1289 1352 1218 1277
2743 x 1981 (9’0" x 6’6") - 1480 - - - 2138 - 2276 - 1782
2743 x 2134 (9’0" x 7’0") - 1480 - - - 2138 - 2308 - 1782
2896 x 1981 (9'6" x 6'6") - 1534 - - - 2213 - 2345 - 1845
2896 x 2134 (9’6" x 7’0") - 1534 - - - 2213 - 2391 - 1845
3048 x 1981 (10’0" x 6’6") - 1865 - - - 2288 - 2425 - 1906
3048 x 2134 (10’0" x 7’0") - 1865 - - - 2288 - 2471 - 1906
Bedford GatcombeBerkeley Vertical Gemini Georgian HavenEuropa II
Cardale Golden Oak and Rosewood finished single steel doors Cardale Golden Oak and Rosewood finished single steel doors
Sheraton II Sheraton II glazed Vogue
All Golden Oak and Rosewood doors are bespoke and made to order.All Golden Oak and Rosewood doors are bespoke and made to order.
STEEL SINGLE UP & OVER DOORS
Size availability (mm) for Made to Measure doors
Minimum width 2083 2083 1981 1981 1981 1981 1981 1981 1981 1981
Maximum width 2438 2438 2438 2438 2438 3048 2438 2438 2438 3048
Minimum height 1829 1860 1829 1860 1829 1918* 1829 1860 1829 1860
Maximum height 2134 2286 2134 2286 2134 2286 2134 2286 2134 2286
Size availability (mm) for Made to Measure doors
Minimum width 1981 1981 1981 1981 1981 1981 1981 1981 1981 1981
Maximum width 2438 3048 2438 2438 2438 3048 2438 3048 2438 3048
Minimum height 1914 1914 1829 1860 1868 1868 1868 1868 1829 1860
Maximum height 2158 2158 2134 2286 2181 2181 2181 2181 2134 2286
C = Canopy gear, R = Retractable gear
Made to Measure doors add £166
C = Canopy gear, R = Retractable gear
Made to Measure doors add £166
14 15
Cardale Golden Oak and Rosewood finished single steel doors - OPTIONS
STEEL SINGLE UP & OVER DOORS
Golden Oak & Rosewood single doors - optionsStandard white frame add £128
Coloured frame add £175 (Golden Oak, Clay Brown RAL 8003, Rosewood, Cherry, Master Chroma 3353)
Cardale DC650T operator add £488
Cardale DC800T operator add £633
Glazing (Bedford) add £153 (Stippled). Black mock glazing standardGlazing (Georgian) add £324
Glazing (Sheraton II) Plain black, Stippled, Transparent, Diamond lattice, Queen Anne lattice, Square lattice (Sheraton II only at no extra cost)
Steel doors including windows.The standard colour window frame for non-white coloured doors and for Rosewood and Golden Oak laminated doors the window frame colour will be black. Colour matched window frames are available but must be specified at time of order.
Colour matched window frames (except Bedford) add £34 per window Colour matched window frames for Bedford add £134 per door
STEEL DOUBLE UP & OVER DOORS
Cardale Golden Oak and Rosewood finished double steel doors
Standard size double doorsGolden Oak or Rosewood finished
Size mm (ft/in)Width by Height R R R R
3200 x 1981 (10'6" x 6'6") 2092 1778 1846 1767
3200 x 2134 (10’6" x 7’0") 2092 1778 1846 1767
3353 x 1981 (11’0" x 6’6") 2159 1835 1934 1801
3353 x 2134 (11’0" x 7’0") 2159 1835 1934 1801
3505 x 1981 (11’6" x 6’6") - 1892 2007 1847
3505 x 2134 (11’6" x 7’0") - 1892 2007 1847
3658 x 1981 (12’0" x 6’6") - 1949 2085 1887
3658 x 2134 (12’0" x 7’0") - 1949 2085 1887
3810 x 1981 (12’6" x 6’6") - 2007 2139 1925
3810 x 2134 (12’6" x 7’0") - 2007 2139 1925
3962 x 1981 (13’0" x 6’6") - 2304 2195 1966
3962 x 2134 (13’0" x 7’0") - 2304 2195 1966
4115 x 1981 (13’6" x 6’6") 2766 2304 2329 2006
4115 x 2134 (13’6" x 7’0") 2766 2304 2329 2006
4267 x 1981 (14’0" x 6’6") 2766 2352 2088 1791
4267 x 2134 (14’0" x 7’0") 2766 2352 2088 1791
4420 x 1981 (14’6" x 6’6") 2904 2671 2557 2059
4420 x 2134 (14’6" x 7’0") 2904 2671 2557 2059
4572 x 1981 (15’0" x 6’6") 3043 2671 2671 2098
4572 x 2134 (15’0" x 7’0") 3043 2671 2671 2098
4877 x 1981 (16’0" x 6’6") 3319 2671 2671 2139
4877 x 2134 (16’0" x 7’0") 3319 2671 2671 2139
Bedford* Berkeley Vertical Europa II Gemini
Minimum width - - 2500 2500
Maximum width - - 4374 4999
Minimum height - - 1927 1927
Maximum height - - 2343 2343
Size availability (mm) for Made to Measure doors
*Bedford doors below 12’ 6” are produced with 3 panels R = Retractable gear
Made to Measure doors add £247
16 17
Cardale Golden Oak and Rosewood finished double steel doors
Standard size double doorsGolden Oak or Rosewood finished
Size mm (ft/in)Width by Height R R R R
3200 x 1981 (10'6" x 6'6") 3053 2527 2730 2106
3200 x 2134 (10’6" x 7’0") 1955 2527 2730 2106
3353 x 1981 (11’0" x 6’6") 2007 2771 2993 2309
3353 x 2134 (11’0" x 7’0") 2007 2771 2993 2309
3505 x 1981 (11’6" x 6’6") 2061 2797 3020 2331
3505 x 2134 (11’6" x 7’0") 2061 2797 3020 2331
3658 x 1981 (12’0" x 6’6") 2114 2892 3123 2409
3658 x 2134 (12’0" x 7’0") 2114 2892 3123 2409
3810 x 1981 (12’6" x 6’6") 2168 2924 3159 2472
3810 x 2134 (12’6" x 7’0") 2168 2924 3159 2472
3962 x 1981 (13’0" x 6’6") 2190 3043 3286 2536
3962 x 2134 (13’0" x 7’0") 2190 3043 3286 2536
4115 x 1981 (13’6" x 6’6") 2211 3199 3454 2665
4115 x 2134 (13’6" x 7’0") 2211 3199 3454 2665
4267 x 1981 (14’0" x 6’6") 2232 2826 3053 2356
4267 x 2134 (14’0" x 7’0") 2232 2826 3053 2356
4420 x 1981 (14’6" x 6’6") 2242 3353 3621 2793
4420 x 2134 (14’6" x 7’0") 2242 3353 3621 2793
4572 x 1981 (15’0" x 6’6") 2276 3419 3692 2849
4572 x 2134 (15’0" x 7’0") 2276 3419 3692 2849
4877 x 1981 (16’0" x 6’6") 2346 3732 4031 3110
4877 x 2134 (16’0" x 7’0") 2346 3732 4031 3110
Georgian Sheraton II Sheraton II glazed Vogue
STEEL DOUBLE UP & OVER DOORS
Minimum width 2500 2500 2500 2500
Maximum width 4999 4999 4999 4999
Minimum height 1930 1880 1880 1927
Maximum height 2158 2193 2193 2343
Size availability (mm) for Made to Measure doors
R = Retractable gear
Made to Measure doors add £247
For Steel Up & Over Door options see page 17
Cardale Golden Oak and Rosewood finished steel doors - OPTIONS
Golden Oak & Rosewood double doors - optionsStandard white frame add £228
Coloured frame add £346 (Golden Oak, Clay Brown RAL 8003, Rosewood, Cherry, Master Chroma 3353)
Cardale DC650T operator add £488
Cardale DC800T operator add £633
Glazing (Bedford) add £308 (Stippled) Black mock glazing standard
Glazing (Georgian) add £640 (Stippled or plain)
Glazing (Sheraton II) Plain black, Stippled, Transparent, Diamond lattice, Queen Anne lattice, Square lattice (Sheraton II only at no extra cost)
Steel doors including windows.The standard colour window frame for Rosewood and Golden Oak laminated doors will be black.Colour matched window frames are available but must be specified at time of order.
Colour matched window frames (except Bedford) add £34 per window
Colour matched window frames for Bedford add £258 per door
Frames ordered with a double door will be supplied as a separate knocked down item.
Frames for Golden Oak finished doors are Clay Brown RAL 8003Frames for Rosewood finished doors are Cherry - Master Chroma 3353
All Golden Oak and Rosewood doors are bespoke and made to order.
Optional extras for operatorsExtra handsets add £74 (2 channel) add £82 (4 channel)
Wireless key pad add £202
External manual override add £46
Keyswitch add £49
GOLDEN OAK AND ROSEWOOD FINISHED STEEL DOORS - OPTIONS
18 19
STEEL SECURED BY DESIGN DOORS
Cardale Secured by Design doors are certificated to CS 5051 STS202 which is approved by ACPO
Association Of Chief Police Officers.
Size mm (ft/in) Width by Height C R C R C R R
1981 x 1830 6’6” x 6’0” 1062 1145 - - -
1981 x 1905 6’6” x 6’3” 1080 1146 1352 1688 -
1981 x 1930 6’6” x 6’4” 1081 1164 1306 1642 -
1981 x 1981 6’6” x 6’6” 1084 1164 1306 1642 -
2085 x 1930 6’10” x 6’4” 1094 1176 1306 1642 -
2085 x 1981 6’10” x 6’6” 1104 1176 1306 1642 -
2085 x 2134 6’10” x 7’0” 1104 1240 1306 1642 1623
2083 x 2210 6'10" x 7'3" 1104 1240 - - 1623
2083 x 2286 6'10" x 7'6" 1104 1179 - - 1623
2134 x 1830 7’0” x 6’0” 1104 1179 - - 1623
2134 x 1905 7’0” x 6’3” 1104 1179 1306 1642 1623
2134 x 1930 7’0” x 6’4” 1104 1179 1306 1642 1623
2134 x 1981 7’0” x 6’6” 1046 1143 1303 1639 1623
2134 x 2134 7’0” x 7’0” 1095 1242 1350 1687 1629
2134 x 2210 7'0" x 7'3" 1126 1214 - - 1666
2134 x 2286 7'0" x 7'6" 1126 1230 - - 1666
2225 x 1930 7’3” x 6’4” 1232 1309 1616 1952 1666
2225 x 1981 7’3” x 6’6” 1130 1207 1405 1742 1666
2225 x 2134 7’3” x 7’0” 1130 1207 1405 1742 1666
2210 x2210 7'3" x 7'3" 1129 1206 - - 1666
2210 x 2286 7'3" x 7'6" 1225 1279 - - 1670
2260 x 1930 7’5” x 6’4” 1199 1313 1598 1935 1736
2260 x 1981 7’5” x 6’6” 1232 1339 1598 1935 1736
2260 x 2134 7’5” x 7’0” 1232 1339 1616 1952 1736
2261 x 2210 7'5" x 7'3" 1247 1376 - - 1740
2261 x 2286 7'5" x 7'6" 1947 1977 - - 2451
2285 x 1930 7’6” x 6’4” 1575 1621 1791 2036 2040
2285 x 1981 7’6” x 6’6” 1575 1621 1791 2036 2040
2285 x 2134 7’6” x 7’0” 1672 1692 1863 2106 2053
2286 x 2210 7'6" x 7'3" 1860 1884 - - 2300
2286 x 2286 7'6" x 7'6" 1976 2004 - - 2451
2438 x 1930 8’0” x 6’4” 1729 1724 1889 2128 2071
2438 x 1981 8’0” x 6’6” 1822 1724 1889 2128 2071
2438 x 2134 8’0” x 7’0” 1855 1724 1918 2156 2082
2438 x 2210 8'0" x 7'3" 2073 1922 - - 2334
2438 x 2286 8'0" x 7'6" 2207 2043 - - 2489
Europa II Gemini Sheraton II Sheraton II glazed Bedford
Cardale Secured by Design steel single doors
Cardale Secured by Design garage doors have spring assisted retractable action for smooth running. Factory fitted steel frames as standard 70mm wide. Cardale Secured by Design Up & Over garage doors can only be supplied in a pre-hung factory finished steel fixing frame, which makes installation simple and eliminates the need for a timber frame. These frames are supplied as standard in white, however colour matched frames are also available. Supplied with our black “D” handle.Secured by Design doors are bespoke and made to order.
Secured by Design doors - optionsMatching coloured frame add £164Painted door panel add £114 (Colours)
Steel doors including windows.The standard colour window frame for white coloured doors is white. For non-white coloured doors the window frame colour will be black.Colour matched window frames are available but must be specified at time of order.Colour matched window frames (except Bedford) add £34 per windowColour matched window frames for Bedford add £134 per door
Optional extras for operatorsExtra handsets add £74 (2 channel) add £82 (4 channel)
Wireless key pad add £202
External manual override add £46 Keyswitch add £49
R = Retractable gear C = Canopy
See page 37 for Timber Secure by Design doors
Minimum width 1981 1981 1981 1981 2083
Maximum width 2438 2438 2438 2438 2438
Minimum height 1829 1829 1868 1868 1800
Maximum height 2286 2286 2134 2134 2286
Cardale Secured by Design doors are certificated to CS 5051 STS202 which is approved by ACPO
Association Of Chief Police Officers.
Colours available: RAL 7038 Ageta Grey RAL 7016 Anthracite Grey RAL 6005 Balmoral Green RAL 8017 Conker Brown RAL 9011 Graphite Black RAL 9004 Signal Black RAL 9005 Ebony Black RAL 7035 Light Grey RAL 5013 Oxford Blue RAL 5011 Midnight Blue RAL 3003 Monarch Red RAL 3009 Oxide Red RAL 8003 Signal Brown RAL 7004 Signal Grey RAL 5024 Pastel Blue RAL 6009 Fir Green RAL 6013 Reed Green BS4800-14C35 Chartwell Green BS4800-12B17 Willow Green BS381-420 Dark Camouflage Desert Sand BS381-389 Camouflage Beige Cherry - Master Chroma 3353
Cardale doors are supplied white RAL 9016 as standard.
20 21
Side hinged steel single doorsPre-finished whiteStandard sizes
Size mm (ft/in)Width by Height (1/2 - 1/2) (1/2 - 1/2) (1/2 - 1/2) (1/2 - 1/2) (1/2 - 1/2)
1981 x 1981 (6'6" x 6'6") - 1549 - 1348 1549
1981 x 2134 (6'6" x 7'0") - 1549 - 1348 1549
2134 x 1981 (7'0" x 6'6") 1685 1549 2174 1348 1549
2134 x 2134 (7'0" x 7'0") 1727 1590 2186 1390 1455
2286 x 1981 (7'6" x 6'6") 1791 1655 2242 1455 1520
2286 x 2134 (7'6" x 7'0") 1897 1762 2284 1562 1625
2438 x 1981 (8'0" x 6'6") 1938 1802 2397 1601 1667
2438 x 2134 (8'0" x 7'0") 2020 1885 2453 1639 1704
Side hinged steel single doorsPre-finished whiteStandard sizes
Size mm (ft/in)Width by Height (2/3 - 1/3) (1/2 - 1/2) (2/3 - 1/3) (1/2 - 1/2) (1/2 - 1/2) (1/2 - 1/2)
1981 x 1981 (6'6" x 6'6") 1232 1333 1608 1790 1571
1981 x 2134 (6'6" x 7'0") 1246 1333 1641 1823 1587
2134 x 1981 (7'0" x 6'6") 1207 1348 1587 1769 1538
2134 x 2134 (7'0" x 7'0") 1274 1390 1676 1860 1621
2286 x 1981 (7'6" x 6'6") 1307 1455 1705 1888 1659
2286 x 2134 (7'6" x 7'0") 1378 1562 1709 1990 1756
2438 x 1981 (8'0" x 6'6") 1396 1601 1718 1901 1766
2438 x 2134 (8'0" x 7'0") 1413 1639 1740 1923 1788
Bedford BromptonBerkeley Horizontal Gatcombe Gemini GeorgianBerkeley Vertical
Cardale powder coated pre-finished side hinged steel doors Cardale powder coated pre-finished side hinged steel doors
Sheraton II Sheraton II glazed Vogue
Steel side hinged doors - optionsUnframed deduct £38
Painted frame add £28
Glazing (Bedford) add £153 (Stippled) Black mock glazing standard
Glazing (Brompton & Georgian) add £323 (Stippled, Diamond Lattice, Square Lattice and Plain)
Painted door add £128
Left hand opening add £75
Side hinged doors supplied with pre-finished white 50mm frame as standard. Doors supplied as standard right hand opening when viewed from outside. All side hinged doors are only available opening outwards.
The standard handle pack includes a Cardale handle and a Black lever handle.
All doors are supplied as standard with 1 pair of door stays. Top and bottom shoot bolts.
Chassis and fixing frames are supplied in Brown RAL 8017 as standard.
Colours available:RAL 7038 Ageta GreyRAL 7016 Anthracite GreyRAL 6005 Balmoral GreenRAL 8017 Conker BrownRAL 9011 Graphite BlackRAL 9004 Signal Black RAL 9005 Ebony BlackRAL 7035 Light GreyRAL 5013 Oxford BlueRAL 5011 Midnight BlueRAL 3003 Monarch RedRAL 3009 Oxide RedRAL 8003 Signal BrownRAL 7004 Signal GreyRAL 5024 Pastel Blue RAL 6009 Fir GreenRAL 6013 Reed GreenBS4800-14C35 Chartwell GreenBS4800-12B17 Willow GreenBS381-420 Dark Camouflage Desert SandBS381-389 Camouflage BeigeCherry - Master Chroma 3353
Cardale doors are supplied white RAL 9016 as standard.
All side hinged doors come complete with a pair of door stays.
Doors are supplied as standard with one black lever style and one Cardale handle.
All side hinged doors are bespoke and made to order.
STEEL SIDE HINGED DOORS
Size availability (mm) for Made to Measure doors
Minimum width 2134 1750 1750 1829 1750
Maximum width 2438 2438 2438 2438 2438
Minimum height 1775 1775 1775 1864 1775
Maximum height 2286 2286 2286 2179 2286
Minimum width 1750 1750 1829 1829 1750
Maximum width 2438 2438 2438 2438 2438
Minimum height 1775 1911 1864 1864 1775
Maximum height 2286 2155 2179 2179 2286
Size availability (mm) for Made to Measure doors
Made to Measure doors add £166 Made to Measure doors add £166
22 23
Side hinged steel single doorsGolden Oak or Rosewood finishedStandard sizes
Size mm (ft/in)Width by Height (1/2 - 1/2) (1/2 - 1/2) (1/2 - 1/2) (1/2 - 1/2) (2/3 - 1/3) (1/2 - 1/2)
1981 x 1981 (6'6" x 6'6") - 1735 1735 1599 1735
1981 x 2134 (6'6" x 7'0") - 1735 1735 1599 1735
2134 x 1981 (7'0" x 6'6") 1871 1735 1735 1599 1735
2134 x 2134 (7'0" x 7'0") 1913 1777 1777 1642 1777
2286 x 1981 (7'6" x 6'6") 1980 1843 1843 1707 1843
2286 x 2134 (7'6" x 7'0") 2088 1951 1951 1816 1951
2438 x 1981 (8'0" x 6'6") 2126 1990 1990 1853 1990
2438 x 2134 (8'0" x 7'0") 2161 2028 2028 1891 1990
Side hinged steel single doorsGolden Oak or Rosewood finishedStandard sizes
Size mm (ft/in)Width by Height (2/3 - 1/3) (1/2 - 1/2) (1/2 - 1/2) (1/2 - 1/2)
1981 x 1981 (6'6" x 6'6") 1457 1599 1897 1750
1981 x 2134 (6'6" x 7'0") 1457 1599 1897 1750
2134 x 1981 (7'0" x 6'6") 1457 1599 1897 1750
2134 x 2134 (7'0" x 7'0") 1527 1642 1939 1833
2286 x 1981 (7'6" x 6'6") 1558 1707 2006 1867
2286 x 2134 (7'6" x 7'0") 1629 1816 2114 1955
2438 x 1981 (8'0" x 6'6") 1646 1853 2152 1979
2438 x 2134 (8'0" x 7'0") 1666 1891 2189 1998
Bedford Berkeley Horizontal Gatcombe Gemini GeorgianBerkeley Vertical
Cardale Golden Oak or Rosewood finished side hinged steel doors Cardale Golden Oak or Rosewood finished side hinged steel doors
Sheraton II Sheraton II glazed Vogue
STEEL SIDE HINGED DOORS
Golden Oak & Rosewood side hinged doors - optionsUnframed deduct £38
Painted frame add £28
Glazing (Bedford) add £153 (Stippled) Black mock glazing standard
Glazing (Georgian) add £323 (Stippled, Diamond Lattice, Square Lattice and Plain)
Left hand opening add £75
Side hinged doors supplied with pre-finished 50mm frame as standard. Doors supplied as standard right hand opening when viewed from outside. All side hinged doors are only available opening outwards.
The standard handle pack includes a Cardale handle and a Black lever handle.
All doors are supplied as standard with 1 pair of door stays. Top and bottom shoot bolts.
Frames for Golden Oak finished doors are Clay Brown RAL 8003Frames for Rosewood finished doors are Cherry - Master Chroma 3353
All side hinged doors come complete with a pair of door stays.
Doors are supplied as standard with one black lever style and one Cardale handle.
All side hinged doors are bespoke and made to order.
Size availability (mm) for Made to Measure doors Size availability (mm) for Made to Measure doors
Minimum width 2134 1750 1750 1750 1750
Maximum width 2438 2438 2438 2438 2438
Minimum height 1775 1775 1775 1775 1775
Maximum height 2286 2286 2286 2286 2286
Minimum width 1750 1829 1829 1750
Maximum width 2438 2438 2438 2438
Minimum height 1911 1864 1864 1775
Maximum height 2155 2179 2179 2286
Made to Measure doors add £166 Made to Measure doors add £166
24 25
Cardale powder coated pre-finished steel personnel doors Cardale Golden Oak or Rosewood finished personnel doors
Powder coated pre-finished steel personnel doors
Size mm (ft/in)Door opening size
762 x 1981 (2'6" x 6'6") 892 x 2049 (2’111⁄4" x 6'83⁄4") 656 646 646 656 656 656
762 x 2134 (2'6" x 7'0") 892 x 2202 (2’111⁄4" x 7'23⁄4") 656 646 646 656 656 656
914 x 1981 (3'0" x 6'6") 1044 x 2049 (3’41⁄3" x 6'83⁄4") 803 792 792 803 803 803
914 x 2134 (3'0" x 7'0") 1044 x 2202 (3’41⁄3" x 7'23⁄4") 803 792 792 803 803 803
1219 x 1981 (4'0" x 6'6") 1349 x 2049 (4’41⁄3" x 6'83⁄4") 981 893 893 981 981 981
1219 x 2134 (4'0" x 7'0") 1349 x 2202 (4’41⁄3" x 7'23⁄4") 981 893 893 981 981 981
Powder coated pre-finished steel personnel doors
Size mm (ft/in)Door opening size
762 x 1981 (2'6" x 6'6") 892 x 2049 (2’111⁄4" x 6'83⁄4") 842 831 831 842 842 842
762 x 2134 (2'6" x 7'0") 892 x 2202 (2’111⁄4" x 7'23⁄4") - 831 831 842 842 842
914 x 1981 (3'0" x 6'6") 1044 x 2049 (3’41⁄3" x 6'83⁄4") 988 977 977 988 988 988
914 x 2134 (3'0" x 7'0") 1044 x 2202 (3’41⁄3" x 7'23⁄4") 988 977 977 988 988 988
1219 x 1981 (4'0" x 6'6") 1349 x 2049 (4’41⁄3" x 6'83⁄4") 1167 1077 1077 1167 1167 1167
1219 x 2134 (4'0" x 7'0") 1349 x 2202 (4’41⁄3" x 7'23⁄4") 1167 1077 1077 1167 1167 1167
Brompton BromptonEuropa II Europa IIGemini GeminiSheraton II Sheraton IIVogue VogueHaven Haven
Minimum width 756 419 419 756 419 419
Maximum width 1067 1219 1219 1067 1219 1219
Minimum height 1864 1829 1829 1864 1829 1829
Maximum height 2134 2286 2286 2134 2286 2286
Minimum width 756 419 419 756 419 419
Maximum width 1067 1219 1219 1067 1219 1219
Minimum height 1864 1829 1829 1864 1829 1829
Maximum height 2134 2286 2286 2134 2286 2286
Personnel doors - options
Painted frame £28
Painted door £126
Security & draught fur pack £165
Glazing (Brompton) £122 (Stippled or Plain)
Glazing (Regal) £122 (Stippled, Plain, Diamond Lattice, Square Lattice)
Personnel doors - optionsPainted frame £28
Security & draught fur pack £165
Glazing (Brompton) £122 (Stippled or Plain)
Glazing (Regal) £122 (Stippled, Plain, Diamond Lattice, Square Lattice)
50mm frame available at no extra cost
Personnel doors are supplied with pre-finished white frame as standard
Made to measure - take next size up and add £67
All Personnel doors are bespoke and made to order.
50mm frame available at no extra cost
Frames for Golden Oak finished doors are Clay Brown RAL 8003Frames for Rosewood finished doors are Cherry - Master Chroma 3353
Made to measure - take next size up and add £67
Size availability (mm) Size availability (mm)
Colours available:RAL 7038 Ageta GreyRAL 7016 Anthracite GreyRAL 6005 Balmoral GreenRAL 8017 Conker BrownRAL 9011 Graphite BlackRAL 9004 Signal Black RAL 9005 Ebony BlackRAL 7035 Light GreyRAL 5013 Oxford BlueRAL 5011 Midnight BlueRAL 3003 Monarch RedRAL 3009 Oxide RedRAL 8003 Signal Brown
RAL 7004 Signal GreyRAL 5024 Pastel Blue RAL 6009 Fir GreenRAL 6013 Reed GreenBS4800-14C35 Chartwell GreenBS4800-12B17 Willow GreenBS381-420 Dark Camouflage Desert SandBS381-389 Camouflage BeigeCherry - Master Chroma 3353
Cardale doors are supplied white RAL 9016 as standard.
STEEL PERSONNEL DOORS
26 27
TIMBER SINGLE UP & OVER DOORS
Timber Futura up & over single doors
Size mm (ft/in)Width by Height C R C R C R C R C R C R
2134 x 1981 (7'0" x 6'6") 2056 2118 1808 1870 1761 1822 1925 1986 1889 1950 1728 1789
2134 x 2134 (7'0" x 7'0") 2056 2118 1808 1870 1761 1822 1925 1986 1889 1950 1728 1789
2134 x 2286 (7'0" x 7'6") - 2241 - 1991 - 2113 - 2108 - 2072 - 1910
2286 x 1981 (7'6" x 6'6") 2166 2228 1868 1929 1841 1902 2033 2094 1990 2051 1868 1929
2286 x 2134 (7'6" x 7'0") 2166 2228 1868 1929 1841 1902 2033 2094 1990 2051 1868 1929
2286 x 2286 (7'6" x 7'6") - 2350 - 2051 - 2023 - 2214 - 2174 - 2051
2438 x 1981 (8'0" x 6'6") 2204 2265 1937 1998 1894 1955 2251 2312 2071 2132 1937 1998
2438 x 2134 (8'0" x 7'0") 2204 2265 1937 1998 1894 1955 2251 2312 2071 2132 1937 1998
2438 x 2286 (8’0” x 7’6”) - 2388 - 2119 - 2077 - 2434 - 2253 - 2119
2743 x 1981 (9’0" x 6’6") - - - 2489 - 2327 - - - 2569 - 2338
2743 x 2134 (9’0" x 7’0") - - - 2489 - 2327 - - - 2569 - 2338
3048 x 1981 (10’0" x 6’6") - - - 2622 - 2419 - - - 2861 - 2411
3048 x 2134 (10’0" x 7’0") - - - 2622 - 2419 - - - 2861 - 2411
Timber Futura up & over single doors
Size mm (ft/in)Width by Height C R C R C R C R C R C R
2134 x 1981 (7'0" x 6'6") 2229 2290 1598 1659 2226 2287 2229 2290 2244 2305 1583 1645
2134 x 2134 (7'0" x 7'0") 2229 2290 1598 1659 2226 2287 2229 2290 2244 2305 1583 1645
2134 x 2286 (7'0" x 7'6") - 2410 - 1781 - 2407 - 2409 - 2428 - 1766
2286 x 1981 (7'6" x 6'6") 2398 2459 1701 1763 2675 2737 2398 2459 2535 2596 1688 1749
2286 x 2134 (7'6" x 7'0") 2398 2459 1701 1763 2675 2737 2398 2459 2535 2596 1688 1749
2286 x 2286 (7'6" x 7'6") - 2581 - 1885 - 2859 - 2945 - 2778 - 1870
2438 x 1981 (8'0" x 6'6") 2542 2603 1791 1852 2374 2435 2542 2603 2946 3007 1778 1839
2438 x 2134 (8'0" x 7'0") 2542 2603 1791 1852 2374 2435 2542 2603 2946 3007 1778 1839
2438 x 2286 (8’0” x 7’6”) - 2725 - 1974 - 2556 - 2725 - 3128 - 1960
2743 x 1981 (9’0" x 6’6") - - - - - 3090 - 3050 - - - 2334
2743 x 2134 (9’0" x 7’0") - - - - - 3090 - 3050 - - - 2388
3048 x 1981 (10’0" x 6’6") - - - - - 3447 - 3447 - - - 2391
3048 x 2134 (10’0" x 7’0") - - - - - 3447 - 3447 - - - 2391
Bedford HampshireBerkeley Vertical HorizontalBurley Ibstock
Cardale Timber Futura up & over single doors Cardale Timber Futura up & over single doors
Chevron Kent WideCotswold StrathmoreGatcombe Vertical
Size availability (mm) for Made to Measure doors Size availability (mm) for Made to Measure doors
Minimum width 1981 1981 1981 1981 1981 1981 1981 1981 1981 1981 1981 1981
Maximum width 2438 2438 2438 3048 2438 3048 2438 2438 2438 3048 2438 3048
Minimum height 1800 1829 1800 1829 1800 1829 1800 1829 1800 1829 1800 1829
Maximum height 2134 2286 2134 2286 2134 2286 2134 2286 2134 2286 2134 2286
Minimum width 1981 1981 1981 1981 1981 1981 1981 1981 1981 1981 1981 1981
Maximum width 2438 2438 2438 2438 2438 3048 2438 3048 2438 2438 2438 3048
Minimum height 1800 1829 1800 1829 1829 1860 1829 1860 1829 1860 1829 1860
Maximum height 2134 2438 2134 2438 2134 2438 2134 2438 2134 2438 2134 2438
Made to Measure doors add £166 Made to Measure doors add £166
C = Canopy gear, R = Retractable gear.
Timber up & over single doors - optionsStandard frame add £128 (Brown RAL 8017)
Coloured frame 54mm/68mm add £175 (Coloured paint)
Cardale DC650T operator add £488
Cardale DC800T operator add £633
Glazing (Bedford) Stippled as standard
Glazing (Cotswold) Plain black, Stippled, Transparent, Diamond lattice, Queen Anne lattice, Square lattice (Cotswold only at no extra cost)
Glazing (Ibstock & Strathmore) Stippled as standard
Optional extras for operatorsExtra handsets add £73 (2 channel) add £82 (4 channel)
Wireless key pad add £202
External manual override add £46
Keyswitch add £49
All timber doors are bespoke and made to order. Timber door fully finished optionsCardale fully finished option is a factory finish process, the Sikkens product used is available in six attractive colours as below. For south facing situations exposed to strong sunlight the dark colours are not recommended, as they can store excessive heat and dry out. Timber doors are supplied with a basecoat stain as standard. They MUST be finished immediately after installation.
Fully finished single timber doors Add £160
Factory Finishes available:Light OakBurnt OakRosewoodWalnutMahoganyEbony
RAL colours available - POA.
28 29
Cardale Timber Futura up & over double doors Cardale Timber Futura up & over double doors
Timber Futura up & over double doors
Size mm (ft/in)Width by Height
R R R R
3048 x 2438 (10’0" x 8’0") - 2782 2674 3405
3658 x 1981 (12’0" x 6’6") - 2999 3039 3494
3658 x 2134 (12’0" x 7’0") - 2999 3039 3494
3658 x 2438 (12’0" x 8’0") - 3159 3327 3711
3962 x 1981 (13’0" x 6’6") - 2982 3186 3647
3962 x 2134 (13’0" x 7’0") - 2982 3186 3647
3962 x 2438 (13’0" x 8’0") - 3220 3478 3917
4267 x 1981 (14’0" x 6’6") 4295 3266 3655 4167
4267 x 2134 (14’0" x 7’0") 4295 3266 3655 4167
4267 x 2438 (14’0" x 8’0") 4409 3603 3978 4515
4572 x 1981 (15’0" x 6’6") 4440 3496 3968 4377
4572 x 2134 (15’0" x 7’0") 4440 3496 3968 4377
4572 x 2438 (15’0" x 8’0") 4835 3756 4276 4698
4877 x 1981 (16’0" x 6’6") 5103 4076 4679 5024
4877 x 2134 (16’0" x 7’0") 5103 4076 4679 5024
4877 x 2438 (16’0" x 8’0") 5089 4197 4904 5252
Timber Futura up & over double doors
Size mm (ft/in)Width by Height
R R R R
3048 x 2438 (10’0" x 8’0") 2926 2748 3310 2462
3658 x 1981 (12’0" x 6’6") 3467 3047 3534 2494
3658 x 2134 (12’0" x 7’0") 3467 3047 3534 2494
3658 x 2438 (12’0" x 8’0") 3563 3311 3656 2738
3962 x 1981 (13’0" x 6’6") 3789 3200 - -
3962 x 2134 (13’0" x 7’0") 3789 3200 - -
3962 x 2438 (13’0" x 8’0") 3861 3462 - -
4267 x 1981 (14’0" x 6’6") 4064 3669 3657 2738
4267 x 2134 (14’0" x 7’0") 4064 3669 3657 2738
4267 x 2438 (14’0" x 8’0") 4288 3960 3902 2981
4572 x 1981 (15’0" x 6’6") 4445 3971 - -
4572 x 2134 (15’0" x 7’0") 4445 3971 - -
4572 x 2438 (15’0" x 8’0") 4586 4272 - -
4877 x 1981 (16’0" x 6’6") 4687 4673 3984 3225
4877 x 2134 (16’0" x 7’0") 4687 4673 3984 3225
4877 x 2438 (16’0" x 8’0") 5087 4912 4146 3402
Bedford CotswoldBerkeley Vertical GatcombeBurley HampshireChevron Horizontal
Size availability (mm) for Made to Measure doors Size availability (mm) for Made to Measure doors
Minimum width 2438 2438 2438 2438
Maximum width 4877 4877 4877 4877
Minimum height 1840 1840 1840 1840
Maximum height 2438 2438 2438 2438
Minimum width 2438 2438 2438 2438
Maximum width 4877 4877 4877 4877
Minimum height 1880 1880 1880 1880
Maximum height 2438 2438 2438 2438
Made to Measure doors add £247 Made to Measure doors add £247
R = Retractable gear.
Timber up & over double doors - optionsStandard frame add £228 (Brown RAL 8017)
Coloured frame 54mm/68mm add £304 (Coloured paint)
Cardale DC650T operator add £488
Cardale DC800T operator add £633
Glazing (Bedford) Stippled as standard
Glazing (Cotswold) Plain black, Stippled, Transparent, Diamond lattice, Queen Anne lattice, Square lattice (Cotswold only at no extra cost)
Optional extras for operatorsExtra handsets add £74 (2 channel) add £82 (4 channel)
Wireless key pad add £202
External manual override add £46
Keyswitch add £49
All timber doors are bespoke and made to order.
Frames ordered with a double door will be supplied as a separate knocked down item.
Timber door fully finished optionsCardale fully finished option is a factory finish process, the Sikkens product used is available in six attractive colours as below. For south facing situations exposed to strong sunlight the dark colours are not recommended, as they can store excessive heat and dry out. Timber doors are supplied with a basecoat stain as standard. They MUST be finished immediately after installation.
Fully finished double timber doors Add £262
Factory Finishes available:Light OakBurnt OakRosewoodWalnutMahoganyEbony
RAL colours available - POA.
Frames ordered with a double door will be supplied as a separate knocked down item.
TIMBER DOUBLE UP & OVER DOORS
30 31
Cardale Timber Futura up & over double doors
Timber Futura up & over double doors
Size mm (ft/in)Width by Height
R R R R
3048 x 2438 (10’0" x 8’0") 3537 3537 - 2482
3658 x 1981 (12’0" x 6’6") 4031 4031 - 3114
3658 x 2134 (12’0" x 7’0") 4031 4031 - 3114
3658 x 2438 (12’0" x 8’0") 4124 4124 - 3225
3962 x 1981 (13’0" x 6’6") 4224 4224 - 3044
3962 x 2134 (13’0" x 7’0") 4224 4224 - 3044
3962 x 2438 (13’0" x 8’0") 4324 4324 - 3232
4267 x 1981 (14’0" x 6’6") 4839 4839 4404 3277
4267 x 2134 (14’0" x 7’0") 4839 4839 4404 3277
4267 x 2438 (14’0" x 8’0") 4956 4956 5039 3565
4572 x 1981 (15’0" x 6’6") 4991 4991 5118 3415
4572 x 2134 (15’0" x 7’0") 4991 4991 5118 3415
4572 x 2438 (15’0" x 8’0") 5086 5086 5250 3673
4877 x 1981 (16’0" x 6’6") 5644 5644 5575 3896
4877 x 2134 (16’0" x 7’0") 5644 5644 5575 3896
4877 x 2438 (16’0" x 8’0") 5615 5615 5867 4068
Ibstock Kent Wide Strathmore Vertical
Made to Measure doors add £247
C = Canopy gear, R = Retractable gear.
Timber up & over double doors - optionsStandard frame add £228 (Brown RAL 8017)
Coloured frame 54mm/68mm add £304 (Coloured paint)
Cardale DC650T operator add £488
Cardale DC800T operator add £633
Glazing (Ibstock and Strathmore) Stippled as standard
Optional extras for operatorsExtra handsets add £74 (2 channel) add £82 (4 channel)
Wireless key pad add £202
External manual override add £46
Keyswitch add £49
All timber doors are bespoke and made to order.
Timber Heritage up & over single doors
Size mm (ft/in)Width by Height
C R C R C R C R C R
2134 x 1981 (7'0" x 6'6") 1680 1741 1593 1653 1593 1653 1593 1653 1680 1741
2134 x 2134 (7'0" x 7'0") 1680 1741 1593 1653 1593 1653 1593 1653 1680 1741
2134 x 2286 (7'0" x 7'6") - 1766 - 1728 - 1728 - 1728 - 1766
2286 x 1981 (7'6" x 6'6") 1778 1840 1629 1691 1629 1691 1629 1691 1778 1840
2286 x 2134 (7'6" x 7'0") 1778 1840 1629 1691 1629 1691 1629 1691 1778 1840
2286 x 2286 (7'6" x 7'6") - 1876 - 1842 - 1842 - 1842 - 1876
2438 x 1981 (8'0" x 6'6") 2009 2071 1750 1811 1750 1811 1750 1811 1938 1999
2438 x 2134 (8'0" x 7'0") 2009 2071 1750 1811 1750 1811 1750 1811 1938 1999
2438 x 2286 (8’0” x 7’6”) - 2192 - 1934 - 1934 - 1934 - 2120
2743 x 1981 (9’0" x 6’6") - 2472 - 2201 - 2201 - 2201 - 2472
2743 x 2134 (9’0" x 7’0") - 2472 - 2201 - 2201 - 2201 - 2472
3048 x 1981 (10’0" x 6’6") - 2760 - 2377 - 2377 - 2377 - 2760
3048 x 2134 (10’0" x 7’0") - 2760 - 2377 - 2377 - 2377 - 2760
Bromley CountrymanCardinal GuildfordChiltern
Cardale Timber Heritage up & over single doors
Size availability (mm) for Made to Measure doors
Minimum width 2438 2438 2438 2438
Maximum width 4877 4877 4877 4877
Minimum height 1880 1880 1880 1880
Maximum height 2438 2438 2438 2438
Size availability (mm) for Made to Measure doors
Minimum width 1981 1981 1981 1981 1981 1981 1981 1981 1981 1981
Maximum width 2438 3048 2438 3048 2438 3048 2438 3048 2438 3048
Minimum height 1829 1860 1829 1860 1829 1860 1829 1860 1829 1860
Maximum height 2134 2286 2134 2286 2134 2286 2134 2286 2134 2286
Made to Measure doors add £247
C = Canopy gear, R = Retractable gear.
Timber up & over single doors - optionsStandard frame add £127 (Brown RAL 8017)
Coloured frame 54mm/68mm add £174 (Coloured paint)
Cardale DC650T operator add £488
Cardale DC800T operator add £633
Glazing (Shropshire) add £248 (Stippled as standard)
Optional extras for operatorsExtra handsets add £74 (2 channel) add £82 (4 channel)
Wireless key pad add £202
External manual override add £46
Keyswitch add £49
All timber doors are bespoke and made to order.
Timber door fully finished optionsCardale fully finished option is a factory finish process, the Sikkens product used is available in six attractive colours as below. For south facing situations exposed to strong sunlight the dark colours are not recommended, as they can store excessive heat and dry out. Timber doors are supplied with a basecoat stain as standard. They MUST be finished immediately after installation.
Fully finished single timber doors Add £160
Factory Finishes available:Light OakBurnt OakRosewoodWalnutMahoganyEbony
RAL colours available - POA.
TIMBER DOUBLE UP & OVER DOORS TIMBER SINGLE UP & OVER DOORS
Timber door fully finished optionsCardale fully finished option is a factory finish process, the Sikkens product used is available in six attractive colours as below. For south facing situations exposed to strong sunlight the dark colours are not recommended, as they can store excessive heat and dry out. Timber doors are supplied with a basecoat stain as standard. They MUST be finished immediately after installation.
Fully finished double timber doors Add £262
Factory Finishes available:Light OakBurnt OakRosewoodWalnutMahoganyEbony
RAL colours available - POA.
Frames ordered with a double door will be supplied as a separate knocked down item.
32 33
Timber heritage up & over single doors
Size mm (ft/in)Width by Height
C R C R C R C R C R
2134 x 1981 (7'0" x 6'6") 1990 2051 1990 2051 1680 1741 1727 1788 1510 1571
2134 x 2134 (7'0" x 7'0") 1990 2051 1990 2051 1680 1741 1727 1788 1510 1571
2134 x 2286 (7'0" x 7'6") - 2168 - 2168 - 1766 - 1823 - 1598
2286 x 1981 (7'6" x 6'6") 2277 2338 2277 2338 1778 1841 1831 1892 1576 1636
2286 x 2134 (7'6" x 7'0") 2277 2338 2277 2338 1778 1841 1831 1892 1576 1636
2286 x 2286 (7'6" x 7'6") - 2388 - 2388 - 1876 - 1919 - 1734
2438 x 1981 (8'0" x 6'6") 2494 2555 2494 2555 1938 1999 1979 2040 1650 1711
2438 x 2134 (8'0" x 7'0") 2494 2555 2494 2555 1938 1999 1979 2040 1650 1711
2438 x 2286 (8’0” x 7’6”) - 2676 - 2676 - 2120 - 2160 - 1833
2743 x 1981 (9’0" x 6’6") - - - 2916 - 2472 - 2569 - 2091
2743 x 2134 (9’0" x 7’0") - - - 2916 - 2472 - 2569 - 2091
3048 x 1981 (10’0" x 6’6") - - - 3268 - 2760 - 2857 - 2282
3048 x 2134 (10’0" x 7’0") - - - 3268 - 2760 - 2857 - 2282
Timber heritage up & over single doors
Size mm (ft/in)Width by Height
C R C R C R
2134 x 1981 (7'0" x 6'6") 1990 2051 1586 1646 1558 1619
2134 x 2134 (7'0" x 7'0") 1990 2051 1586 1646 1558 1619
2134 x 2286 (7'0" x 7'6") 2107 2168 - - - 1695
2286 x 1981 (7'6" x 6'6") 2277 2338 1654 1716 1442 1502
2286 x 2134 (7'6" x 7'0") 2277 2338 1654 1716 1442 1502
2286 x 2286 (7'6" x 7'6") - 2388 - - - 1583
2438 x 1981 (8'0" x 6'6") 2494 2555 1733 1792 1457 1518
2438 x 2134 (8'0" x 7'0") 2494 2555 1733 1792 1457 1518
2438 x 2286 (8’0” x 7’6”) - 2676 - 1915 - 1641
2743 x 1981 (9’0" x 6’6") - 2472 - 2201 - 2201
2743 x 2134 (9’0" x 7’0") - 2472 - 2201 - 2201
3048 x 1981 (10’0" x 6’6") - 2760 - 2377 - 2377
3048 x 2134 (10’0" x 7’0") - 2760 - 2377 - 2377
Hampstead ThornleyShropshire glazedHathaway TudorStuartShropshire Windsor
Cardale Timber Heritage up & over single doors Cardale Timber Heritage up & over single doors
Size availability (mm) for Made to Measure doors Size availability (mm) for Made to Measure doors
Minimum width 1981 1981 1981 1981 1981 1981 1981 1981 1981 1981
Maximum width 2438 2438 2438 3048 2438 3048 2438 3048 2438 3048
Minimum height 1829 1860 1829 1860 1829 1860 1829 1860 1829 1860
Maximum height 2134 2286 2134 2286 2134 2286 2134 2286 2134 2286
Minimum width 1981 1981 1981 1981 1981 1981
Maximum width 2438 3048 2438 3048 2438 3048
Minimum height 1829 1860 1829 1860 1829 1860
Maximum height 2134 2286 2134 2286 2134 22286
TIMBER SINGLE UP & OVER DOORS
All Timber doors are bespoke and made to order.
C = Canopy gear, R = Retractable gear.
Timber up & over single doors - optionsStandard frame add £128 (Brown RAL 8017)
Coloured frame 54mm/68mm add £175 (Coloured paint)
Cardale DC650T operator add £488
Cardale DC800T operator add £633
Glazing (Shropshire) add £248 (Stippled as standard)
Optional extras for operatorsExtra handsets add £74 (2 channel) add £82 (4 channel)
Wireless key pad add £202
External manual override add £46
Keyswitch add £49
Timber door fully finished optionsCardale fully finished option is a factory finish process, the Sikkens product used is available in six attractive colours as below. For south facing situations exposed to strong sunlight the dark colours are not recommended, as they can store excessive heat and dry out. Timber doors are supplied with a basecoat stain as standard. They MUST be finished immediately after installation.
Fully finished single timber doors Add £160
Factory Finishes available:Light OakBurnt OakRosewoodWalnutMahoganyEbonyRAL colours available - POA.
Made to Measure doors add £166 Made to Measure doors add £166
34 35
Cardale Timber Heritage up & over double doors Cardale Timber Heritage up & over double doors
Timber Heritageup & over double doors
Size mm (ft/in)Width by Height R R R R
3048 x 2438 (10’0" x 8’0") 2916 2647 2647 2647
3658 x 1981 (12’0" x 6’6") 3413 2875 2875 2875
3658 x 2134 (12’0" x 7’0") 3413 2875 2875 2875
3658 x 2438 (12’0" x 8’0") 3603 3065 3065 3065
4267 x 1981 (14’0" x 6’6") 3897 3342 3342 3342
4267 x 2134 (14’0" x 7’0") 3897 3342 3342 3342
4267 x 2438 (14’0" x 8’0") 2731 3540 3540 3540
4877 x 1981 (16’0" x 6’6") 4341 4209 4209 4209
4877 x 2134 (16’0" x 7’0") 4341 4209 4209 4209
4877 x 2438 (16’0" x 8’0") 4510 4380 4380 4380
Timber Heritageup & over double doors
Size mm (ft/in)Width by Height R R R R R
3048 x 2438 (10’0" x 8’0") 2916 - 3537 2916 3013
3658 x 1981 (12’0" x 6’6") 3413 - 3471 3413 3511
3658 x 2134 (12’0" x 7’0") 3413 - 3471 3413 3511
3658 x 2438 (12’0" x 8’0") 3603 - 3723 3603 3700
4267 x 1981 (14’0" x 6’6") 3897 4704 4328 3897 3994
4267 x 2134 (14’0" x 7’0") 3897 4704 4328 3897 3994
4267 x 2438 (14’0" x 8’0") 5015 5014 4639 4077 4175
4877 x 1981 (16’0" x 6’6") 4341 5231 4854 4341 4439
4877 x 2134 (16’0" x 7’0") 4341 5231 4854 4341 4439
4877 x 2438 (16’0" x 8’0") 4510 5588 5210 4510 4608
Bromley ChilternCardinal Countryman Guildford HathawayHampstead Shropshire glazedShropshire
Minimum width 2438 2438 2438 2438
Maximum width 4877 4877 4877 4877
Minimum height 1880 1880 1880 1880
Maximum height 2438 2438 2438 2438
Size availability (mm) for Made to Measure doors
Minimum width 2438 2438 2438 2438 2438
Maximum width 4877 4877 4877 4877 4877
Minimum height 1880 1880 1880 1880 1880
Maximum height 2438 2438 2438 2438 2438
Size availability (mm) for Made to Measure doors
Made to Measure doors add £247 Made to Measure doors add £247
C = Canopy gear, R = Retractable gear.
Timber up & over double doors - optionsStandard frame add £228 (Brown RAL 8017)
Coloured frame 54mm/68mm add £304 (Coloured paint)
Cardale DC650T operator add £488
Cardale DC800T operator add £633
Glazing (Bromley, Shropshire, Guildford) add £499 (Stippled as standard)
Optional extras for operatorsExtra handsets add £74 (2 channel) add £82 (4 channel)
Wireless key pad add £202
External manual override add £46
Keyswitch add £49
All timber doors are bespoke and made to order.
Frames ordered with a double door will be supplied as a separate knocked down item.
Timber door fully finished optionsCardale fully finished option is a factory finish process, the Sikkens product used is available in six attractive colours as below. For south facing situations exposed to strong sunlight the dark colours are not recommended, as they can store excessive heat and dry out. Timber doors are supplied with a basecoat stain as standard. They MUST be finished immediately after installation.
Fully finished double timber doors Add £262
Factory Finishes available:Light OakBurnt OakRosewoodWalnutMahoganyEbony
RAL colours available - POA.
Frames ordered with a double door will be supplied as a separate knocked down item.
TIMBER DOUBLE UP & OVER DOORS
36 37
Cardale Timber Heritage up & over double doors
Timber Heritageup & over double doors
Size mm (ft/in)Width by Height R R R R
3048 x 2438 (10’0" x 8’0") 2457 2916 2647 2647
3658 x 1981 (12’0" x 6’6") 2781 3413 2875 2875
3658 x 2134 (12’0" x 7’0") 2781 3413 2875 2875
3658 x 2438 (12’0" x 8’0") 2944 3603 3065 3065
4267 x 1981 (14’0" x 6’6") 2838 3897 3342 3342
4267 x 2134 (14’0" x 7’0") 2838 3897 3342 3342
4267 x 2438 (14’0" x 8’0") 3159 4076 3540 3540
4877 x 1981 (16’0" x 6’6") 4129 4341 4209 4209
4877 x 2134 (16’0" x 7’0") 4129 4341 4209 4209
4877 x 2438 (16’0" x 8’0") 4302 4510 4380 4380
Stuart TudorThornley Windsor
Minimum width 2438 2438 2438 2438
Maximum width 4877 4877 4877 4877
Minimum height 1880 1880 1880 1880
Maximum height 2438 2438 2438 2438
Size availability (mm) for Made to Measure doors
Made to Measure doors add £166
C = Canopy gear, R = Retractable gear.
Timber up & over double doors - optionsStandard frame add £228 (Brown RAL 8017)
Coloured frame 54mm/68mm add £304 (Coloured paint)
Cardale DC650T operator add £488
Cardale DC800T operator add £633
Optional extras for operatorsExtra handsets add £74 (2 channel) add £82 (4 channel)
Wireless key pad add £202
External manual override add £46
Keyswitch add £49
All timber doors are bespoke and made to order.
Frames ordered with a double door will be supplied as a separate knocked down item.
Timber door fully finished optionsCardale fully finished option is a factory finish process, the Sikkens product used is available in six attractive colours as below. For south facing situations exposed to strong sunlight the dark colours are not recommended, as they can store excessive heat and dry out. Timber doors are supplied with a basecoat stain as standard. They MUST be finished immediately after installation.
Fully finished double timber doors Add £262
Factory Finishes available:Light OakBurnt OakRosewoodWalnutMahoganyEbony
RAL colours available - POA.
Frames ordered with a double door will be supplied as a separate knocked down item.
Secured by Design steel single doors
Size mm (ft/in)Width by Height
C R C R C R
1981 x 1830 6’6” x 6’0” 2790 2727 2671
1981 x 1905 6’6” x 6’3” 2790 2727 2671
1981 x 1930 6’6” x 6’4” 2790 2727 2671
1981 x 1981 6’6” x 6’6” 2790 2727 2671
2085 x 1930 6’10” x 6’4” 2790 2727 2671
2085 x 1981 6’10” x 6’6” 2790 2727 2671
2085 x 2134 6’10” x 7’0” 2790 2727 2671
2083 x 2210 6'10" x 7'3" 2790 2727 2671
2083 x 2286 6'10" x 7'6" 2790 2727 2671
2134 x 1830 7’0” x 6’0” 2790 2727 2671
2134 x 1905 7’0” x 6’3” 2790 2727 2671
2134 x 1930 7’0” x 6’4” 2790 2727 2671
2134 x 1981 7’0” x 6’6” 2790 2727 2671
2134 x 2134 7’0” x 7’0” 2790 2734 2685
2134 x 2210 7'0" x 7'3" 2790 2734 2685
2134 x 2286 7'0" x 7'6" 2790 3170 2867
2225 x 1930 7’3” x 6’4” 2790 3170 2867
2225 x 1981 7’3” x 6’6” 2790 3170 2867
2225 x 2134 7’3” x 7’0” 2790 3170 2867
2210 x2210 7'3" x 7'3" 2790 3170 2867
2210 x 2286 7'3" x 7'6" 2790 3170 2867
2260 x 1930 7’5” x 6’4” 2790 3170 2867
2260 x 1981 7’5” x 6’6” 2790 3170 2867
2260 x 2134 7’5” x 7’0” 2790 3170 2867
2261 x 2210 7'5" x 7'3" 2790 3170 2867
2261 x 2286 7'5" x 7'6" 2790 3170 2867
2285 x 1930 7’6” x 6’4” 2805 3170 2867
2285 x 1981 7’6” x 6’6” 2805 2794 2872
2285 x 2134 7’6” x 7’0” 2805 2852 2894
2286 x 2210 7'6" x 7'3" 2805 2852 2894
2286 x 2286 7'6" x 7'6" 2988 3035 3076
2438 x 1930 8’0” x 6’4” 2988 3035 3076
2438 x 1981 8’0” x 6’6” 2988 2871 2991
2438 x 2134 8’0” x 7’0” 2988 2934 2997
2438 x 2210 8'0" x 7'3" 2988 2934 2997
2438 x 2286 8'0" x 7'6" 2988 3116 3179
Berkeley Vertical Burley Gatcombe
Cardale Secured by Design Timber single doors
Cardale Secured by Design garage doors have spring assisted retractable action for smooth running.Factory fitted steel frames as standard 70mm wide. Cardale Secured by Design Up & Over garage doors can only be supplied in a pre-hung factory finished steel fixing frame, which makes installation simple and eliminates the need for a timber frame. These frames are supplied as standard in white, however colour matched frames are also available. Supplied with our black “D” handle.
Cardale Secured by Design doors are certificated to CS 5051 STS202 which is approved by ACPO Association Of Chief
Police Officers.
Secured by Design doors - optionsMatching coloured frame add £164
Painted door panel add £114 (Colours)
Optional extras for operators
Extra handsets add £74 (2 channel) add £82 (4 channel)
Wireless key pad add £202
External manual override add £6
Keyswitch add £49
R = Retractable gear, C = Canopy
Canopy and retractable doors are the same price
Factory Finishes available:Light OakBurnt OakRosewoodWalnutMahoganyEbony
RAL colours available - POA.
Secured by Design doors are bespoke and made to order.
TIMBER DOUBLE UP & OVER DOORS TIMBER SECURED BY DESIGN DOORS
38 39
Timber Futura side hinged single doors
Size mm (ft/in)Width by Height (1/2 - 1/2) (1/2 - 1/2) (1/2 - 1/2) (1/2 - 1/2) (1/2 - 1/2)
2134 x 1981 (7'0" x 6'6") 2360 2174 2186 2360 2174
2134 x 2134 (7'0" x 7'0") 2400 2186 2207 2400 2186
2286 x 1981 (7'6" x 6'6") 2532 2242 2327 2532 2242
2286 x 2134 (7'6" x 7'0") 2619 2284 2389 2619 2284
2438 x 1981 (8'0" x 6'6") 2705 2397 2494 2705 2397
2438 x 2134 (8'0" x 7'0") 2749 2453 2547 2749 2453
Timber Futura side hinged single doors
Size mm (ft/in)Width by Height (1/2 - 1/2) (1/2 - 1/2) (1/2 - 1/2) (1/2 - 1/2)
2134 x 1981 (7'0" x 6'6") 2460 2508 2460 2050
2134 x 2134 (7'0" x 7'0") 2488 2537 2488 2074
2286 x 1981 (7'6" x 6'6") 2529 2681 2529 2107
2286 x 2134 (7'6" x 7'0") 2578 2755 2578 2148
2438 x 1981 (8'0" x 6'6") 2714 2861 2714 2261
2438 x 2134 (8'0" x 7'0") 2783 2897 2783 2319
Bedford HampshireGarage Light VerticalBerkeley Vertical IbstockGatcombeChevron Kent
Cardale Timber Futura side hinged doors Cardale Timber Futura side hinged doors
Size availability (mm) for Made to Measure doors Size availability (mm) for Made to Measure doors
Minimum width 1778 1778 1778 1778 1778
Maximum width 2438 2438 2438 2438 2438
Minimum height 1775 1775 1775 1775 1775
Maximum height 2286 2286 2286 2286 2286
Minimum width 1778 1778 1778 1778
Maximum width 2438 2438 2438 2438
Minimum height 1775 1775 1775 1775
Maximum height 2286 2286 2286 2286
Timber side hinged doors - optionsFully finished add £158
Unframed deduct £40
Painted frame add £268
Left hand opening add £81
Glazing (Bedford, Garage Light, Stippled as standardIbstock)
Glazing (Milton) add £135 (Stippled, as standard)
Side hinged doors supplied with pre-finished conker brown 50mm frame as standard. Doors supplied as standard right hand opening when viewed from outside. All side hinged doors open outwards.
All side hinged doors come complete with door stay.
All side hinged doors are bespoke and made to order.
The standard handle pack includes a Cardale handle and a Black lever handle.
All doors are supplied as standard with 1 pair of door stays. Top and bottom shoot bolts.
Chassis and fixing frames are supplied in Brown RAL 8017 as standard.
Timber door fully finished optionsCardale fully finished option is a factory finish process, the Sikkens product used is available in six attractive colours as below. For south facing situations exposed to strong sunlight the dark colours are not recommended, as they can store excessive heat and dry out. Timber doors are supplied with a basecoat stain as standard. They MUST be finished immediately after installation.
Fully finished double timber doors Add £262Made to measure doors Add £162
Factory Finishes available:Light OakBurnt OakRosewoodWalnutMahoganyEbonyRAL colours are available - POA
TIMBER SIDE HINGED DOORS
Made to Measure doors add £166 Made to Measure doors add £166
40 41
Timber Heritage side hinged single doors
Size mm (ft/in)Width by Height (1/2 - 1/2) (1/2 - 1/2) (1/2 - 1/2) (1/2 - 1/2)
2134 x 1981 (7'0" x 6'6") 2018 2023 1923 1923
2134 x 2134 (7'0" x 7'0") 2053 2059 1958 1958
2286 x 1981 (7'6" x 6'6") 2083 2088 1987 1987
2286 x 2134 (7'6" x 7'0") 2109 2115 2015 2015
2438 x 1981 (8'0" x 6'6") 2243 2249 2148 2148
2438 x 2134 (8'0" x 7'0") 2307 2313 2212 2212
Malvern ShakespeareMilton Rutland
Cardale Timber Heritage side hinged doors
Size availability (mm) for Made to Measure doors
Minimum width 1778 1778 1778 1778
Maximum width 2438 2438 2438 2438
Minimum height 1775 1775 1775 1775
Maximum height 2286 2286 2286 2286
All side hinged doors come complete with door stay.
All side hinged doors are bespoke and made to order.
TIMBER SIDE HINGED DOORS
Timber side hinged doors - optionsFully finished add £158
Unframed deduct £40
Painted frame add £268
Left hand opening add £81
Glazing (Bedford, Garage Light, Stippled as standardIbstock)
Glazing (Milton) add £135 (Stippled, as standard)
Side hinged doors supplied with pre-finished conker brown 50mm frame as standard. Doors supplied as standard right hand opening when viewed from outside. All side hinged doors open outwards.
All side hinged doors come complete with door stay.
All side hinged doors are bespoke and made to order.
The standard handle pack includes a Cardale handle and a Black lever handle.
All doors are supplied as standard with 1 pair of door stays. Top and bottom shoot bolts.
Chassis and fixing frames are supplied in Brown RAL 8017 as standard.
Timber door fully finished optionsCardale fully finished option is a factory finish process, the Sikkens product used is available in six attractive colours as below. For south facing situations exposed to strong sunlight the dark colours are not recommended, as they can store excessive heat and dry out. Timber doors are supplied with a basecoat stain as standard. They MUST be finished immediately after installation.
Fully finished double timber doors Add £262
Factory Finishes available:Light OakBurnt OakRosewoodWalnutMahoganyEbony
RAL colours are available - POA
Made to Measure doors add £166
Cardale GRP single doors
GRPsingle doors
Size mm (ft/in)Width by Height C R C R C R C R C R
2134 x 1981 (7'0" x 6'6") 1922 1983 1663 1724 1883 1944 1883 1944 1883 19442134 x 2134 (7'0" x 7'0") 1922 1983 1663 1724 1883 1944 1883 1944 1883 19442286 x 1981 (7'5" x 6'6") 2111 2173 1760 1821 2166 2228 2166 2228 2166 22282286 x 2134 (7'5" x 7'0") 2111 2173 1760 1821 2166 2228 2166 2228 2166 22282286 x 1981 (7'6" x 6'6") 2111 2173 1760 1821 2166 2228 2166 2228 2166 22282286 x 2134 (7'6" x 7'0") 2111 2173 1760 1821 2166 2228 2166 2228 2166 22282438 x 1981 (8’0" x 6’6") 2184 2245 1831 1892 2237 2298 2237 2298 2237 22982438 x 2134 (8’0" x 7’0") 2184 2245 1831 1892 2237 2298 2237 2298 2237 2298
GRPsingle doors
Size mm (ft/in)Width by Height C R C R C R C R
2134 x 1981 (7'0" x 6'6") 2235 2296 1883 1944 1883 1944 1883 19442134 x 2134 (7'0" x 7'0") 2235 2296 1883 1944 1883 1944 1883 19442286 x 1981 (7'5" x 6'6") 2288 2349 2166 2228 2166 2228 2166 22282286 x 2134 (7'5" x 7'0") 2288 2349 2166 2228 2166 2228 2166 22282286 x 1981 (7'6" x 6'6") 2288 2349 2166 2228 2166 2228 2166 22282286 x 2134 (7'6" x 7'0") 2288 2349 2166 2228 2166 2228 2166 22282438 x 1981 (8’0" x 6’6") 2356 2417 2237 2298 2237 2298 2237 22982438 x 2134 (8’0" x 7’0") 2356 2417 2237 2298 2237 2298 2237 2298
Chelsea II glasswhite
Sutherland glasswood
Lyndhurst II glasswood
Kingston
Georgian II glasswhite
Virginia glasswood
Nelson glasswoodHambledon II glasswood
Winchester glasswood
Size availability (mm) for Made to Measure doors
Size availability (mm) for Made to Measure doors
Minimum width 2032 2032 2032 2032 2032 2032 2032 2032 1981 1981
Maximum width 2438 2438 2540 2540 2438 2438 2438 2438 2380 2380
Minimum height 1880 1880 1880 1880 1880 1880 1880 1880 1981 1981
Maximum height 2134 2134 2286 2286 2134 2134 2286 2286 2134 2134
Minimum width 2134 2134 1981 1981 1981 1981 2134 2134
Maximum width 2438 2438 2438 2438 2286 2286 2540 2540
Minimum height 1931 1931 1829 1829 1829 1829 1981 2032
Maximum height 2134 2134 2286 2286 2438 2438 2286 2286
C = Canopy gear, R = Retractable gear.
GRP single doors - optionsStandard frame £128 (Pre-finished or white painted)
Coloured frame £174 (Coloured paint)
Glazing (Lyndhurst II) £181 (Stippled) Black mock glazing standard
Glazing (Sutherland) £278 (Stippled or plain) Black mock glazing standard
Glazing (Georgian II) Plain black, Stippled, Transparent, Diamond lattice, Queen Anne lattice, Square lattice (add £269)
Glazing (Chelsea II) £298
Woodgrain colour options standard as price listWhite, Magnolia, Bleached Oak, Red Mahogany, Light Oak, Dark Oak, Honey Beech, Teak, Rosewood, Dark Mahogany Golden Brown, Ebony, Irish Oak, Anthracite Grey
Woodgrain colour options at additional costBlue, Red, Green £245RAL colour of your choice £306
High Gloss colour options standard as price listGloss White and Gloss Magnolia
All GRP doors are bespoke and made to order.
GRP SINGLE UP & OVER DOORS
42 43
Cardale GRP double doors Cardale GRP double doors
GRPdouble doors
Size mm (ft/in)Width by Height R R R R
2743 x 1981 (9’0" x 6’6") - 2445 - 2651
2743 x 2134 (9’0" x 7’0") - 2445 - 2651
3048 x 1981 (10’0" x 6’6") - 2673 - 2882
3048 x 2134 (10’0" x 7’0") - 2673 - 2882
3353 x 1981 (11’0" x 6’6") - 2988 - 3161
3353 x 2134 (11’0" x 7’0") - 2988 - 3161
3658 x 1981 (12’0" x 6’6") - 3220 - 3532
3658 x 2134 (12’0" x 7’0") - 3220 - 3532
3962 x 1981 (13’0" x 6’6") - 3279 - 3652
3962 x 2134 (13’0" x 7’0") - 3279 - 3652
4267 x 1981 (14’0" x 6’6") 3541 3213 3689 3689
4267 x 2134 (14’0" x 7’0") 3541 3213 3689 3689
4572 x 1981 (15’0" x 6’6") 4128 3805 4223 4223
4572 x 2134 (15’0" x 7’0") 4128 3805 4223 4223
4877 x 1981 (16’0" x 6’6") - 4365 4642 4642
4877 x 2134 (16’0" x 7’0") - 4365 4642 4642
GRPdouble doors
Size mm (ft/in)Width by Height R R R
2743 x 1981 (9’0" x 6’6") - - 2651
2743 x 2134 (9’0" x 7’0") - - 2651
3048 x 1981 (10’0" x 6’6") - - 2882
3048 x 2134 (10’0" x 7’0") - - 2882
3353 x 1981 (11’0" x 6’6") - - 3161
3353 x 2134 (11’0" x 7’0") - - 3161
3658 x 1981 (12’0" x 6’6") - - 3532
3658 x 2134 (12’0" x 7’0") - - 3532
3962 x 1981 (13’0" x 6’6") - - 3652
3962 x 2134 (13’0" x 7’0") - - 3652
4267 x 1981 (14’0" x 6’6") 3689 3736 3689
4267 x 2134 (14’0" x 7’0") 3689 3736 3689
4572 x 1981 (15’0" x 6’6") 4223 - 4223
4572 x 2134 (15’0" x 7’0") 4223 - 4223
4877 x 1981 (16’0" x 6’6") 4642 - 4642
4877 x 2134 (16’0" x 7’0") 4642 - 4642
Chelsea II glasswhite Nelson glasswoodGeorgian II glasswhite Sutherland glasswoodHambledon II glasswood Virginia glasswoodLyndhurst II glasswood
Size availability (mm) for Made to Measure doors Size availability (mm) for Made to Measure doors
Minimum width 4115 2743 4115 2743
Maximum width 4572 4877 4724 4877
Minimum height 1880 1880 1880 1880
Maximum height 2134 2286 2134 2134
Minimum width 4115 4267 2438
Maximum width 4267 4724 4877
Minimum height 1981 1931 1829
Maximum height 2134 2134 2286
R = Retractable gear.
GRP double doors - optionsStandard frame £345 (Pre-finished or white painted)
Coloured frame £317 (Coloured paint)
Glazing (Lyndhurst II) £181 (Stippled) Black mock glazing standard
Glazing (Sutherland) £278 (Stippled or plain) Black mock glazing standard
Glazing (Georgian II) Plain black, Stippled, Transparent, Diamond lattice, Queen Anne lattice, Square lattice (add £269)
Glazing (Chelsea II) £298
Woodgrain colour options standard as price listWhite Magnolia Bleached Oak Red Mahogany Light OakDark Oak Honey Beech Teak Rosewood Dark Mahogany Golden Brown Ebony Irish Oak Anthracite Grey
Woodgrain colour options at additional costBlue, Red, Green add £245RAL colour of your choice add £306
High Gloss colour options standard as price listGloss White and Gloss Magnolia
All GRP doors are bespoke and made to order.
GRP DOUBLE UP & OVER DOORS
44 45
Cardale GRP side hinged doors
GRPside hinged doors
For available sizes see below (1/2 - 1/2) (1/2 - 1/2) (1/2 - 1/2) (1/2 - 1/2)
2293 2117 2117 2117
Sutherland glasswood Georgian II glasswhiteLyndhurst glasswood Virginia glasswood
Size availability (mm)
Minimum width 2134 2134 1830 2134
Maximum width 2438 2438 2438 2438
Minimum height 1930 1930 1830 1930
Maximum height 2134 2134 2134 2134
GRP side hinged doors - optionsUnframed deduct £40
Painted frame add £29
Glazing (Sutherland) add £140 (Stippled) Black mock glazing standard
Glazing (Lyndhurst) add £339 (Stippled, Diamond Lattice, Square Lattice and Plain)
Glazing (Georgian Glasswhite) add £339 (Stippled, Diamond Lattice, Square Lattice and Plain)
Painted door add £134
Left hand opening add £79
Side hinged doors supplied with pre-finished white 50mm frame as standard. Doors supplied as standard right hand opening when viewed from outside. All side hinged doors are only available opening outwards.
All side hinged doors come complete with a pair of door stays.
All side hinged doors are bespoke and made to order.
Cardale GRP personnel door
GRPsingle doors
For available sizes see below
1268
Virginiaglasswood
Size availability (mm)
Minimum width 720
Maximum width 1220
Minimum height 1930
Maximum height 2134
Personnel door - optionsUnframed deduct £19
Painted frame £27
Painted door £125
50mm frame available at no extra cost
Personnel doors are supplied with pre-finished white frame as standard
Made to measure - take next size up and add £67
All Personnel doors are bespoke and made to order.
GRP SIDE HINGED DOORS AND PERSONNEL DOOR ABS SINGLE UP & OVER DOORS AND PERSONNEL DOOR
ABS up & over single doorsstandard sizes
Size mm (ft/in)Width by Height C R C R C R C R C R C R
2134 x 1981 (7'0" x 6'6") 1164 1225 1059 1120 1164 1225 1008 1069 1059 1120 780 842
2134 x 2134 (7'0" x 7'0") 1164 1225 1059 1120 1164 1225 1008 1069 1059 1120 780 842
2286 x 1981 (7'6" x 6'6") 1269 1330 1269 1330 1269 1330 1115 1176 1164 1225 872 933
2286 x 2134 (7'6" x 7'0") 1269 1330 1269 1330 1269 1330 1115 1176 1164 1225 872 933
2438 x 1981 (8'0" x 6'6") 1373 1434 1269 1330 1373 1434 1220 1281 1269 1330 966 1027
2438 x 2134 (8'0" x 7'0") 1373 1434 1269 1330 1373 1434 1220 1281 1269 1330 966 1027
Bedford Jacobean President
Cardale ABS up & over single doors
Cardale ABS personnel door
Regal Senator Vertical
Please check availability of minimum and maximum sizes on the table above before you order.
C = Canopy gear, R = Retractable gear.
ABS single doors - optionsStandard frame add £128 (Pre-finished or white painted)
Coloured frame add £175 (Coloured paint)
Cardale DC650T operator add £488
Cardale DC800T operator add £633
Glazing (Bedford) add £165 (Stippled) Black mock glazing standard
Glazing (President) add £256 (Stippled or plain) Black mock glazing standard
Glazing (Senator) Plain black, Stippled, Transparent, Diamond lattice, Queen Anne lattice, Square lattice (add £259)
Optional extras for operatorsExtra handsets add £74 (2 channel) add £82 (4 channel)
Wireless key pad add £202
External manual override add £46
Keyswitch add £49
Steel chassis and fixing frames are supplied in RAL 9016 white.
All ABS doors are bespoke and made to order.
Size availability (mm) for Made to Measure doors
Minimum width 2073 2073 2073 2073 2056 2021 2073 2031 1998 2021 2056 1816
Maximum width 2550 2550 2550 2550 2550 2550 2550 2550 2550 2550 2550 2550
Minimum height 2021 2021 2021 2021 2021 2021 2021 2021 1969 1969 1897 1897
Maximum height 2229 2229 2229 2229 2229 2332 2229 2229 2229 2229 2229 2332
3 panel 4 panel
ABS personnel door
For available sizes see below
762 x 1981 (2’6” x 6’6”) 892 x 2049 (2’111⁄4" x 6'83⁄4") 927
762 x 2134 (2’6” x 7’0”) 892 x 2202 (2’111⁄4" x 7'23⁄4") 927
Regal
Size availability (mm)
Minimum width 580
Maximum width 800
Minimum height 1981
Maximum height 2210
Personnel doors - optionsUnframed deduct £18
Painted frame £27
Painted door £120
Security & draught fur pack £158
Glazing (Brompton) £117 (Stippled or Plain)
Glazing (Regal) £117 (Stippled, Plain, Diamond Lattice, Square Lattice)
50mm frame available at no extra cost
Personnel doors are supplied with pre-finished white frame as standard
Made to measure - take next size up and add £64
All Personnel doors are bespoke and made to order.
Made to Measure doors add £166
Made to Measure doors add £166
46 47
Cardale Steeline roller doors Cardale Thermaglide roller doors
Heightmm (ft/in)
21857'2"
23377'8"
24898'2"
26428'8"
27949'2"
29469'8"
309910'2"
2134 (7’ 0”) 1102 1132 1142 1242 1293 1459 1495
Curtain width mm (ft/in)
Mini Steeline roller doorsfits in 9” headroom - available in all Cardale colours
Heightmm (ft/in)
21857’2”
23377’8”
24898’2”
26428’8”
27949’2”
29469’8”
309910’2”
325110’8”
340411’2”
355611’8”
375812’4”
406313’4”
436814’4”
467315’4”
497816’4”
2134 (7’ 0”) 1055 1082 1086 1196 1233 1390 1438 1582 1699 1922 2054 2228 2361 2592 2794
2438 (8’0”) 1181 1209 1189 1296 1349 1438 1540 1685 1798 2103 2248 2492 2734 2888 3043
2743 (9’0”) 1324 1361 1366 1467 1519 1579 1718 1920 2096 2322 2503 2767 2912 - -
3048 (10’0”) 1495 1586 1558 1647 1684 1742 1892 2144 2388 2642 2856 3021 3341 - -
Curtain width 'A' SeriesOpening +50mm (2in) minimum
Curtain width 'AA' SeriesOpening +100mm (4in) minimum
Ordering notesSteelline doors are designed to fit behind the brickwork opening, allowing clear drive-through width*. Please therefore order by the curtain size, ensuring that the curtain width is greater than the opening by: 4’0” – 10’0” wide add 50mm to brickwork. Over 10’0” wide add 100mm to brickwork
Textured Golden Oak or Rosewood - add 20% , Mahogany Woodgrain - add 7%.
Series Curtain width
‘A’ Series Opening + 50mm (2”) minimum
‘AA’ Series (solid areas) Opening + 100mm (4”) minimum * The drive-through height is 80mm less than the nominal opening height
Textured Golden Oak or Rosewood - add 20% , Mahogany Woodgrain - add 7%.Doors are designed to fit behind the reveal. Doors are supplied with a lock hole unless specified otherwise.Sizes listed are the ordering sizes. These are the curtain sizes.
All Steeline roller doors are bespoke and made to order.
Steeline roller door optionsSlimline slimdrive operator £623
Complete lock replacement £66
Replacement key £17
Touch up paint £25
Odd width cut down (applicable to doors under 4’ wide) £104
Non standard brackets £76
Brush seal for header (3m length) £215
Thermaglide 77mm insulated roller doorsColouredThermaglide 77mm insulated roller doorsColoured
Thermaglide 55mm insulated roller doorsColoured
Woodgrain
Woodgrain
Thermaglide 77 doors are supplied with colour matched guide rails as standard. Up to 3 metre - 70mm guide rails. Over 3 metre - 90mm guide rails.Half and Full boxes are supplied as white unless any of the other door colours are specified. All Thermaglide77 doors are supplied as standard with 270mm steel headplates that are not suitable for half or full box. Half or full boxes are supplied with 300mm steel headplates.
Thermaglide 55 doors are supplied with 65mm colour matched guide rails and full box as standard.Full boxes are supplied white as standard.
Guide heightmm (ft/in) 2500 (8’23⁄8”) 3000 (9’101⁄8”) 3500 (11’51⁄4”) 4000 (13’11⁄2”) 4600 (15’11⁄8”) 5000 (16’4”)
1981 (6’6”) 1516 1664 1787 2024 2168 2487
2134 (7’0”) 1533 1679 1795 2039 2264 2556
2286 (7’6”) 1586 1727 1833 2206 2384 2658
2438 (8’0”) 1609 1821 1856 2190 2459 2647
2591 (8’6”) 1790 1892 1986 2389 2552 2929
2743 (9’0”) 1818 1938 2010 2465 2872 3071
Over guide width up to mm (ft/in)
Guide heightmm (ft/in) 1981 (6’6”) 2500 (8’23⁄8”) 2896 (9’5”)
1981 (6’6”) 1534 1613 1690
2134 (7’0”) 1559 1587 1765
2286 (7’6”) 1634 1733 1880
2438 (8’0”) 1839 1888 2022
Over guide width up to mm (ft/in)
Guide heightmm (ft/in) 2500 (8’23⁄8”) 3000 (9’101⁄8”) 3500 (11’51⁄4”) 4000 (13’11⁄2”) 4600 (15’11⁄8”) 5000 (16’4”)
1981 (6’6”) 1869 2067 2249 2562 2840 3144
2134 (7’0”) 1862 2061 2236 2598 2872 3226
2286 (7’6”) 1947 2145 2306 2626 2973 3320
2438 (8’0”) 1990 2269 2427 2729 3167 3438
2591 (8’6”) 2269 2458 2706 3025 3423 3661
2743 (9’0”) 2458 2501 2648 3179 3367 4276
Over guide width up to mm (ft/in)
Guide heightmm (ft/in) 1981 (6’6”) 2500 (8’23⁄8”) 2896 (9’5”)
1981 (6’6”) 1534 1613 1690
2134 (7’0”) 1559 1587 1765
2286 (7’6”) 1634 1733 1880
2438 (8’0”) 1839 1888 2022
Over guide width up to mm (ft/in)
Door width mm (ft/in) 2500 (8’23⁄8”) 3000 (9’101⁄8”) 3500 (11’51⁄4”) 4000 (13’11⁄2”) 4600 (15’11⁄8”) 5000 (16’4”)
Half box 149 162 176 196 210 231
Full box 223 252 284 312 352 387
Thermaglide roller door - optionsEmergency manual override £171Handset 1 button £62 Handset 4 button £82 Wired push button £16Colour matched box £50/mWireless push button £92
Wireless key pad £210Alarm* £115Wired key switch £62Vision lath 77 £39/mVented lath 77 £35/m
Thermaglide 77 low maintenance powdercoat finishesWhite RAL 9016, Mocca RAL 8019, Black RAL 9011, Burgundy RAL 3004, Racing Green RAL 6009, Blue RAL 5011,Beige RAL 1019, Chartwell Green RAL 6021, Anthracite Grey RAL 7016, Rosewood, Golden Oak
Thermaglide 77 high grade woodgrain laminate finishesBlack, Anthracite Grey, Golden Oak, Rosewood, Moss Green, Mahogany, Steel Blue
Thermaglide 55 low maintenance powdercoat finishesWhite RAL 9016, Mocca RAL 8019, Black RAL 9011, Burgundy RAL 3004, Racing Green RAL 6009, Blue RAL 5011, Anthracite Grey RAL 7016, Golden Oak
Thermaglide 55 weathergrain wood laminate finishesRosewood, Golden Oak
All Thermaglide roller doors are bespoke and made to order.
STEEL ROLLER DOORS ALUMINIUM INSULATED ROLLER DOORS
Standard coloursWhite Anthracite Vandyke Brown Black Goosewing Grey Merlin Grey Olive Green Juniper Green Burgundy Mushroom Honesty Cream Heritage Green Solent Blue Golden Oak Rosewood
48 49
Cardale Sectional iso20 overhead garage doors Cardale Sectional iso20 overhead garage doors
INSULATED SECTIONAL DOORS
Flush
iso 20 sectional doors up to 2125mm 4 panels high, up to 2500mm 5 panels high, up to 3000mm 6 panels highiso 20 sectional doors have an insulation value of k=1.0 W/mK
Sectional frame heads are colour matched to the door as standard.
Frame leg cover profiles 2.5 m length White 85mm x 20mm (per pair) add £59 55mm x 20mm (per pair) add £59
Super colour 85mm x 20mm (per pair) add £73 55mm x 20mm (per pair) add £73
RAL colour 85mm x 20mm (per pair) add £111 55mm x 20mm (per pair) add £111
Golden Oak 85mm x 20mm (per pair) add £111 & Rosewood 55mm x 20mm (per pair) add £111
Super colour Options Steel Blue (RAL 5011) Moss Green (RAL 6005) Fir Green (RAL 6009) Anthracite (RAL 7016) Ochre Brown (RAL 8001), Nut Brown (RAL 8011) Sepia Brown (RAL 8014), Light Grey (RAL 7035) Window Grey (RAL 7040) Black (RAL 9005) White Aluminium (RAL 9006) Grey Aluminium (RAL 9007)
Glazing Options (for styles see page 67)
Window option clear/crystal, VI, V2, V3 (per window] White frame add £96 RAL frame add £109Window option clear/crystal, V4d, V4s (per window] White frame add £103 RAL frame add £115V8 windows not available
Handle optionsManual locking with Black D Handle add £56Metallic ‘D’ handles (White, Brass, Silver and Antique Bronze effect) add £115Metallic lever door handles (White, Brass, Silver and Antique Bronze effect) add £177
Automated Options
NovoPort® (Electric Operator) add £477
Additional Micro two channel remote control handsets add £85
Additional Mini two channel remote control handsets add £64
Additional Mini four channel remote control handsets add £64
Sectional doors are bespoke and made to order.
Horizontal
Georgian
Large Rib
Optional Extras
iso20 Flush Smooth
iso20 Horizontal and Large Rib Woodgrain
iso20 Panelled Woodgrain
Standard Widths2084
6'10"
2134
7'0"
2235
7'4"
2286
7'6"
2438
8'0"
2591
8'6"
2743
9'0"
3000
9'10"
Standard Heights Number of Windows 3 3 3 3 4 4 4 5
1925 2000 2075 2125
6’4” 6’6”
6’10” 7’0”
White 893 893 893 893 893 992 992 1019
Supercolour 1017 1020 1026 1029 1038 1148 1157 1199
RAL Colour 1272 1278 1289 1296 1314 1536 1553 1600
2250 7’4”
White 1059 1059 1059 1059 1059 1308 1308 1336
Supercolour 1191 1194 1200 1204 1214 1472 1482 1527
RAL Colour 1317 1324 1335 1342 1362 1629 1648 1709
2375 2500
7’9” 8’2”
White 1134 1134 1134 1134 1134 1401 1401 1432
Supercolour 1292 1296 1303 1308 1319 1597 1609 1660
RAL Colour 1442 1450 1464 1473 1495 1785 1807 1876
26252750
8’9 9’0”
White 1461 1461 1461 1461 1461 1834 1834 1862
Supercolour 1634 1638 1646 1650 1664 2050 2063 2111
RAL Colour 1799 1807 1823 1832 1857 2256 2281 2350
Standard Widths2084
6'10"
2134
7'0"
2235
7'4"
2286
7'6"
2438
8'0"
2591
8'6"
2743
9'0"
3000
9'10"
Standard Heights Number of Windows 3 3 3 3 4 4 4 5
1925 2000 2075 2125
6’4” 6’6”
6’10” 7’0”
White 893 893 893 893 893 992 992 1019
Supercolour 1017 1020 1026 1029 1038 1148 1157 1199
RAL Colour 1136 1142 1155 1161 1178 1296 1314 1371
2250 7’4”
White 935 935 935 935 935 1100 1100 1212
Supercolour 1068 1071 1077 1080 1090 1264 1274 1403
RAL Colour 1193 1200 1213 1219 1238 1421 1440 1584
2375 2500
7’9” 8’2”
White 1002 1002 1002 1002 1002 1178 1178 1298
Supercolour 1160 1164 1171 1175 1186 1374 1386 1526
RAL Colour 1311 1318 1333 1340 1363 1562 1584 1742
26252750
8’9 9’0”
White 1113 1113 1113 1113 1113 1403 1403 1445
Supercolour 1286 1290 1298 1303 1316 1619 1631 1695
RAL Colour 1451 1460 1476 1484 1510 1824 1849 1933
Intermediate height or width combination Add £139.00
Intermediate height or width combination Add £139.00Not available for heights >2125 and <2225 Intermediate height or width combination Add £139.00
Standard Widths2084
6'10"
2134
7'0"
2235
7'4"
2286
7'6"
2438
8'0"
2591
8'6"
2743
9'0"
3000
9'10"
Standard Heights Number of Windows 3 3 3 3 4 4 4 5
1925 2000 2075 2125
6’4” 6’6”
6’10” 7’0”
White 1179 1182 1188 1191 1201 1340 1349 1531
Supercolour 1298 1305 1317 1323 1340 1489 1507 1703
RAL Colour 1199 1199 1199 1199 1199 1329 1329 1473
2250 7’4”
White 1331 1334 1340 1343 1354 1493 1503 1664
Supercolour 1458 1464 1476 1482 1501 1650 1670 1845
RAL Colour 1284 1284 1284 1284 1284 1424 1424 1579
2375 2500
7’9” 8’2”
White 1442 1446 1454 1458 1469 1621 1632 1805
Supercolour 1592 1600 1615 1623 1645 1807 1830 2023
RAL Colour 1431 1431 1431 1431 1431 1602 1602 1921
26252750
8’9 9’0”
White 1604 1609 1617 1621 1634 1819 1831 2171
Supercolour 1770 1778 1794 1802 1828 2025 2049 2409
RAL Colour 1770 1778 1794 1802 1828 2025 2049 2409
50 51
Cardale Sectional iso45 overhead garage doors Cardale Sectional iso45 overhead garage doors
INSULATED SECTIONAL DOORS
Sectional frame heads are colour matched to the door as standard.Frame leg cover profiles 2.5 m length White 85mm x 20mm (per pair) add £59 55mm x 20mm (per pair) add £59
Super colour 85mm x 20mm (per pair) add £73 55mm x 20mm (per pair) add £73
RAL colour 85mm x 20mm (per pair) add £111 55mm x 20mm (per pair) add £111
Wood Effects 85mm x 20mm (per pair) add £111 & Satins 55mm x 20mm (per pair) add £111
Super colour Options Steel Blue (RAL 5011) Moss Green (RAL 6005) Fir Green (RAL 6009) Anthracite (RAL 7016) Ochre Brown (RAL 8001) Nut Brown (RAL 8011) Sepia Brown (RAL 8014) Light Grey (RAL 7035) Window Grey (RAL 7040) Black (RAL 9005) White Aluminium (RAL 9006) Grey Aluminium (RAL 9007)
Rustic wood effects (smooth finish), iso45 only Golden Oak Dark Oak Rosewood Light Oak Winchester
Structural surfaces, iso45 only Satin White (RAL 9016) Satin Dark Grey (RAL 7016) Satin Brown (RAL 8014) Satin Grey (composite shade) Window Grey (RAL 7040)Not available in iso45 Panelled
Microline pattern iso45 only Satin White (RAL 9016) Satin Grey (composite shade) Satin Dark Grey (RAL 7016) Satin Window Grey (RAL 7040)
Equivalent RAL colours for painted window frames: Golden Oak (RAL 8007) Rosewood (composite colour) Dark Oak (RAL 8028) Satin White (RAL 9016) Satin Grey (composite colour) Satin Dark Grey (RAL 7016) Satin Window Grey (RAL 7040) Satin Brown (RAL 8014) Light Oak* (RAL 8022) Winchester* (RAL 8001)*All colour profiles have matching finishes except for Light Oak and Winchester which are painted.Colour variations may occur due to production processes and does not constitute a complaint.
Glazing Options (for styles see page 56)
Window option clear/crystal, VI, V2, V3 (per window] White frame add £96 RAL frame add £109Window option clear/crystal, V4d, V4s (per window] White frame add £96 RAL frame add £109Window option V7 aluminium light strip POA
Window option clear/crystal V8 Portholes - Large rib and flush doors only. (per window) each add £355
Window option Aluminium finish V8 Square (per window) add £338
Handle optionsManual locking with Black D Handle add £52Metallic ‘D’ handles (White, Brass, Silver & Antique Bronze effect) add £115Metallic lever door handles (White, Brass, Silver & Antique Bronze effect) add £177
Low Headroom Kit iso45mm add £123
Ventilation grille to suit iso45 add £38
Automated Options NovoPort® (Electric Operator) add £477Additional Micro two channel remote control handsets add £85Additional Mini two channel remote control handsets add £64Additional Mini four channel remote control handsets add £64
Wicket doors only available in iso45See page 56
Sectional doors are bespoke and made to order.
Optional Extrasiso45 Georgian WoodgrainAvailable in these Wood Effects finishes: Golden Oak, Dark Oak, Rosewood
Standard Widths
20846’10”
21347’0”
22357’4”
22867’6”
23887’10”
24388’0”
25918’6”
27439’0”
304810’0”
335311’0”
365812’0”
396213’0”
421613’10”
426714’0”
442014’6”
457215’0”
487716’0”
518217’0”
550018’0”
Standard Heights
Number of Windows 3 3 3 3 3 3 3 4 4 4 4 5 5 5 6 6 6 6 7
18751925 20002050 2075 21252250
6’2” 6’4” 6’6” 6’9”
6’10” 7’0” 7’4”
White 1186 1186 1186 1186 1186 1186 1440 1440 1789 1789 1986 1986 2102 2102 2102 2257 2257 2446 2446
Supercolour 1311 1314 1320 1323 1329 1332 1595 1604 1973 1973 2206 2225 2356 2359 2368 2533 2551 2758 2776
RAL Colour &Wood Effects
1430 1436 1448 1455 1466 1472 1744 1762 2147 2147 2415 2451 2597 2603 2621 2794 2829 3055 3092
2375 2500
7’9” 8’2”
White 1438 1438 1438 1438 1438 1438 1741 1741 2139 2139 2552 2552 2704 2704 2704 2911 2911 3182 3182
Supercolour 1596 1600 1608 1612 1620 1623 1938 1949 2369 2369 2829 2852 3023 3027 3039 3257 3280 3575 3599
RAL Colour &Wood Effects
1747 1754 1769 1777 1792 1799 2125 2147 2590 2590 3094 3139 3328 3335 3358 3587 3632 3948 3995
2625 2750 2875 3000
8’9” 9’0” 9’5” 9’9”
White 2486 2486 2486 2486 2486 2486 2608 2608 2641 2641 2911 2911 3109 3109 3109 - - - -
Supercolour 2674 2680 2689 2693 2702 2707 2844 2857 2917 2918 3244 3271 3492 3497 3511 - - - -
RAL Colour &Wood Effects
2855 2864 2883 2891 2909 2918 3068 3095 3181 3182 3560 3614 3858 3867 3893 - - - -
iso45 sectional doors up to 2125mm 4 panels high, up to 2500mm 5 panels high, up to 3000mm 6 panels high. Not available for heights >2125 and < 2225.Intermediate height or width combination Add £139.00
52 53
Cardale Sectional iso45 overhead garage doors
iso45 Horizontal, Large Rib and Flush Woodgrain
iso45 Large Rib SmoothAvailable in these Wood Effects finishes: Golden Oak, Dark Oak, Rosewood, Winchester, Light Oak
Available in these Satin finishes: Grey, Dark Grey, White, Window Grey, Brown
Standard Widths
20846’10”
21347’0”
22357’4”
22867’6”
23887’10”
24388’0”
25918’6”
27439’0”
304810’0”
335311’0”
365812’0”
396213’0”
421613’10”
426714’0”
442014’6”
457215’0”
487716’0”
518217’0”
550018’0”
Standard Heights
Number of Windows 3 3 3 3 4 4 4 4 5 5 6 6 7 7 7 7 8 8 8
18751925 20002050 2075 21252250
6’2” 6’4” 6’6” 6’9”
6’10” 7’0” 7’4”
White 1032 1032 1032 1032 1032 1032 1214 1214 1388 1388 1541 1541 1631 1631 1631 1752 1752 1898 1898
Supercolour 1209 1212 1219 1222 1228 1231 1431 1440 1642 1661 1840 1859 1969 1973 1982 2119 2138 2309 2329
RAL Colour 1276 1282 1294 1301 1312 1318 1518 1535 1745 1782 1971 2006 2126 2132 2149 2289 2325 2506 2544
2375 2500
7’9” 8’2”
White 1276 1276 1276 1276 1276 1276 1536 1536 2015 2015 2238 2238 2282 2282 2282 2455 2455 2684 2684
Supercolour 1440 1444 1452 1457 1465 1469 1741 1753 2255 2280 2528 2552 2615 2619 2632 2817 2842 3095 3119
RAL Colour 1529 1536 1551 1559 1574 1581 1853 1876 2379 2424 2683 2729 2807 2815 2838 3026 3071 3335 3382
2625 2750 2875 3000
8’9” 9’0” 9’5” 9’9”
White 1890 1890 1890 1890 1890 1890 1979 1979 2226 2226 2453 2453 2620 2620 2620 2825 2825 2949 -
Supercolour 2088 2092 2102 2106 2117 2122 2225 2239 2515 2544 2801 2829 3020 3025 3040 3260 3290 3441 -
RAL Colour 2178 2187 2205 2214 2232 2241 2353 2381 2671 2725 2997 3051 3256 3265 3292 3516 3570 3742 -
Standard Widths
20846’10”
21347’0”
22357’4”
22867’6”
23887’10”
24388’0”
25918’6”
27439’0”
304810’0”
335311’0”
365812’0”
396213’0”
421613’10”
426714’0”
442014’6”
457215’0”
487716’0”
518217’0”
550018’0”
Standard Heights
Number of Windows 3 3 3 3 4 4 4 4 5 5 6 6 7 7 7 7 8 8 8
18751925 20002050 2075 21252250
6’2” 6’4” 6’6” 6’9”
6’10” 7’0” 7’4”
White 1135 1135 1140 1143 1148 1151 1339 1346 1536 1536 1719 1734 1836 1838 1846 1975 1989 2150 2165
Supercolour 1259 1264 1275 1280 1291 1296 1495 1512 1720 1720 1939 1972 2089 2095 2111 2249 2283 2461 2496
RAL Colour 1378 1386 1403 1412 1428 1436 1643 1669 1894 1895 2148 2199 2331 2339 2364 2511 2562 2758 2811
Wood Effects 1241 1245 1253 1257 1265 1269 1471 1482 1689 1689 1896 1920 2034 2038 2050 2189 2212 2389 2413
Satin 1227 1231 1240 1245 1255 1260 1456 1470 1673 1674 1883 1911 2025 2030 2044 2180 2208 2383 2412
2375 2500
7’9” 8’2”
White 1410 1413 1419 1422 1429 1432 1702 1712 2209 2229 2472 2492 2552 2555 2564 2748 2768 3016 3037
Supercolour 1574 1581 1595 1603 1618 1625 1907 1929 2451 2470 2762 2806 2886 2893 2914 3110 3154 3426 3472
RAL Colour 1656 1668 1688 1699 1721 1731 2012 2044 2565 2585 2907 2971 3065 3076 3108 3306 3370 3653 3719
Wood Effects 1481 1486 1496 1501 1511 1516 1792 1806 2314 2315 2599 2629 2697 2702 2717 2906 2936 3195 3226
Satin 1624 1634 1653 1664 1683 1693 1972 2001 2517 2541 2850 2909 3000 3010 3040 3234 3294 3572 3633
2625 2750 2875 3000
8’9” 9’0” 9’5” 9’9”
White 2050 2053 2061 2066 2073 2077 2178 2190 2460 2460 2735 2758 2944 2948 2960 3177 3201 3348 -
Supercolour 2248 2256 2274 2283 2300 2308 2424 2450 2750 2750 3081 3134 3345 3354 3379 3612 3664 3839 -
RAL Colour 2332 2344 2369 2382 2408 2420 2544 2583 2895 2897 3266 3343 3566 3578 3617 3853 3929 4124 -
Wood Effects 2136 2142 2154 2160 2172 2178 2285 2303 2586 2587 2886 2921 3118 3124 3143 3366 3403 3562 -
Satin 2103 2110 2125 2132 2146 2153 2260 2282 2561 2561 2865 2908 3104 3111 3132 3351 3394 3556 -
Intermediate height or width combination Add £139.00
Intermediate height or width combination Add £139.00
Flush Horizontal RibWoodgrain only Large Rib
INSULATED SECTIONAL DOORS
iso45 Flush Smooth
iso45 Microline
Flush Smooth available in these Wood Effects finishes: Golden Oak, Dark Oak, Rosewood, Winchester, Light Oak
Flush Smooth available in these Satin finishes: Grey, Dark Grey, White, Window Grey, Brown
Microline available in these Satin finishes: Grey, Dark Grey, White, Window Grey
Flush Microline
Microline
Cardale Sectional iso45 overhead garage doors
Standard Widths
20846’10”
21347’0”
22357’4”
22867’6”
23887’10”
24388’0”
25918’6”
27439’0”
304810’0”
335311’0”
365812’0”
396213’0”
421613’10”
426714’0”
442014’6”
457215’0”
487716’0”
518217’0”
550018’0”
Standard Heights
Number of Windows 3 3 3 3 4 4 4 4 5 5 6 6 7 7 7 7 8 8 8
18751925 20002050 2075 21252250
6’2” 6’4” 6’6” 6’9”
6’10” 7’0” 7’4”
White 1118 1120 1124 1127 1131 1133 1376 1382 1742 1742 1946 1959 2076 2078 2085 2231 2244 2428 2442
Supercolour 1242 1248 1259 1264 1275 1280 1531 1547 1925 1926 2165 2198 2329 2334 2350 2505 2538 2739 2772
RAL Colour 1362 1370 1386 1395 1412 1420 1680 1704 2100 2100 2376 2425 2570 2579 2603 2767 2816 3036 3088
Wood Effects 1221 1224 1232 1235 1243 1246 1503 1515 1898 1898 2127 2148 2276 2280 2291 2447 2469 2668 2692
Satin 1206 1210 1219 1223 1232 1236 1484 1497 1871 1871 2100 2126 2252 2257 2271 2423 2449 2646 2673
2375 2500
7’9” 8’2”
White 1460 1463 1468 1471 1477 1480 1745 1754 2185 2186 2535 2553 2706 2709 2718 2915 2934 2991 3009
Supercolour 1624 1631 1645 1652 1667 1673 1950 1972 2427 2428 2824 2866 3040 3047 3068 3277 3319 3401 3445
RAL Colour 1704 1715 1736 1746 1767 1777 2053 2085 2542 2543 2967 3029 3213 3223 3255 3466 3528 3628 3693
Wood Effects 1526 1531 1540 1544 1553 1559 1828 1842 2283 2284 2652 2680 2841 2846 2860 3061 3090 3157 3185
Satin 1665 1674 1693 1702 1721 1731 2003 2032 2484 2507 2897 2953 3132 3142 3170 3378 3434 3529 3588
2625 2750 2875 3000
8’9” 9’0” 9’5” 9’9”
White 2193 2197 2204 2207 2214 2219 2406 2417 2614 2614 2903 2924 3123 3127 3138 3369 3392 - -
Supercolour 2391 2399 2416 2425 2442 2450 2653 2678 2904 2905 3251 3301 3524 3532 3558 3804 3855 - -
RAL Colour 2468 2481 2506 2518 2544 2556 2763 2800 3043 3044 3427 3503 3737 3750 3787 4036 4112 - -
Wood Effects 2274 2279 2290 2295 2306 2312 2506 2522 2732 2732 3044 3077 3285 3291 3308 3546 3579 - -
Satin 2231 2238 2251 2258 2272 2278 2467 2488 2696 2696 3011 3051 3257 3264 3284 3515 3556 - -
Intermediate height or width combination Add £139.00
Intermediate height or width combination Add £139.00
Standard Widths
20846’10”
21347’0”
22357’4”
22867’6”
23887’10”
24388’0”
25918’6”
27439’0”
304810’0”
335311’0”
365812’0”
396213’0”
421613’10”
426714’0”
442014’6”
457215’0”
487716’0”
518217’0”
550018’0”
Standard Heights
Number of Windows 3 3 3 3 4 4 4 4 5 5 6 6 7 7 7 7 8 8 8
18751925 20002050 2075 21252250
6’2” 6’4” 6’6” 6’9”
6’10” 7’0” 7’4”
Satin 1168 1172 1179 1182 1189 1192 1438 1449 1816 1817 2035 2056 2178 2181 2192 2342 2363 2554 2576
2375 2500
7’9” 8’2”
Satin 1769 1780 1804 1817 1840 1852 2133 2169 2636 2681 3078 3151 3343 3354 3390 3606 3678 3787 3862
2625 2750 2875 3000
8’9” 9’0” 9’5” 9’9”
Satin 2176 2181 2191 2196 2207 2212 2398 2414 2613 2614 2912 2945 3144 3149 3165 3393 3424 - -
FOR OPTIONAL EXTRAS SEE PAGE 51
iso45 sectional doors up to 2125mm 4 panels high, up to 2500mm 5 panels high, up to 3000mm 6 panels high.iso45 sectional doors have an insulation value of k= 0.5 W/mKFor heights > 2125 < 2225 the top panel will be cut to suit the door height
54 55
DUOPORT 45mm INSULATED SIDE HINGED GARAGE DOORS
Horizontal Rib
DuoPort Horizontal Rib WoodgrainOverall Frame Size (up to) Brickwork Size (up to) Woodgrain White RAL 9016 Woodgrain Supercolour Woodgrain RAL colour
Width Height Width Height List Price List Price List Price
2580 2165 2590 2170 2549 2803 3117
2580 2540 2590 2545 2674 2973 3343
Large Rib
DuoPort Large Rib Woodgrain or Smooth
Overall Frame Size (up to)
Brickwork Size (up to)
Woodgrain White
RAL 9016
Woodgrain Supercolour
Woodgrain RAL colour
Smooth White
RAL 9016
Smooth Supercolour
SmoothRAL
colour
SatinWhite, Grey,
Brown, Dark Grey
SmoothGolden OakRosewoodDark Oak
WinchesterLight Oak
Width Height Width Height List Price List Price List Price List Price List Price List Price List Price List Price
2580 2165 2590 2170 2549 2803 3117 3673 3927 4241 3673 4061
2580 2540 2590 2545 2674 2973 3343 3896 4195 4563 3896 4272
Flush
DuoPort Flush Woodgrain or Smooth
Overall Frame Size (up to)
Brickwork Size (up to)
Woodgrain White RAL
9016
Woodgrain Supercolour
Woodgrain RAL colour
Smooth White
RAL 9016
Smooth Supercolour
SmoothRAL
colour
SatinWhite, Grey,
Brown, Dark Grey
SmoothGolden OakRosewoodDark Oak
WinchesterLight Oak
Width Height Width Height List Price List Price List Price List Price List Price List Price List Price List Price
2580 2165 2590 2170 3454 3708 4022 3673 3927 4241 3673 4061
2580 2540 2590 2545 3633 3932 4301 3896 4195 4563 3896 4272
Panelled
DuoPort Panelled Woodgrain
Overall Frame Size (up to)
Brickwork Size (up to)
Woodgrain White RAL
9016
Woodgrain Supercolour
Woodgrain RAL colour
SmoothGolden OakRosewoodDark Oak
WinchesterLight Oak
Width Height Width Height List Price List Price List Price List Price
2580 2165 2590 2170 3585 3839 4182 4111
Optional ExtrasThermally Separated Frame - Type H add £804 per door
3 Point Locking add £307 per door
Hinges Painted Super colour add £178 each
Hinges Painted RAL colour add £226 each
Door Closer and Hold Open device add £334 each
Windows V1 add £93 each
V2 add £112 each
V3 add £112 each
V8 add £392 each
V9 add £341 each
Light Strip Clear add £111 each
Light Strip Crystal add £118 per leaf
Ventilation add £56 per leaf
Handles Stainless Steel add £99 each
Silver add £99 each
Brass add £99 each
White add £119 each
RAL Colour add £147 each
Please state opening direction and handing of active leaf when ordering
Minimum Frame Size for all DuoPort doors - 1530w x 1940h
(Brickwork size 1540w x 1945h)
Cardale DuoPort garage doors
Supercolours
Wood Effects
Optional Extras
Silver or gold handles and escutcheons add £65 per set
3 point locking add £190 per set
WindowsV1, V2, V3 500 x 285mm Rectangular windows, clear or crystal White Frame add £92 each
Painted Frame add £109 each
V4S, V4D Above windows with diamond or square leading Painted Frame add £92 each Silver Frame add £109 eachV8 350mm square porthole window (not Georgian) Silver Frame add £339 each
V9 320mm square porthole window (not Georgian) Painted RAL 9006 add £339 each
Galvanised threshold and door stays supplied as standard
*Georgian prices on application
Steel Blue, similar to RAL 5011 Moss Green, similar to RAL 6005 Fir Green similar to RAL 6009 Light Grey similar to RAL 7035 Window Grey similar to RAL 7040 White Aluminium similar to RAL 9006 Grey Aluminum similar to RAL 9007 Anthracite similar to RAL 7016 Ochre Brown similar to RAL 8001 Nut Brown similar to RAL 8011 Sepia Brown similar to RAL 8014 Black similar to RAL 9005.
Golden Oak and Rosewood in Large Rib only
Minimum Frame Size for all DuoPort SF doors - 1530w x 1940h (Brickwork size 1540w x 1945h)
Cardale DuoPort SF garage doors
For intermediate height or width please add + 10% to the price matrix
For all Vertical styles please add +10% to the price matrix
Between Frame Sizes19816’6”
21347’0”
22867’6”
24388’0”
Standard White
1981 6’6” 1683 1744 1831 1918
2134 7’0” 1754 1821 1887 1943
2286 7’6” 1821 1887 1979 2045
Supercolour or Wood Effects
1981 6’6” 1843 1917 2016 2114
2134 7’0” 1927 2006 2086 2155
2286 7’6” 2005 2086 2192 2273
RAL Colour
1981 6’6” 1940 2013 2112 2211
2134 7’0” 2024 2103 2183 2252
2286 7’6” 2102 2183 2289 2369
Standard heights
Standard widths
*Georgian Woodgrain Horizontal
*Georgian Woodgrain Vertical
Horizontal Woodgrain
Flush Smooth Horizontal
Vertical Woodgrain
Large RibWoodgrain or SmoothHorizontal
Flush Smooth Vertical
Large RibWoodgrain or SmoothVertical
DUOPORTSF 45mm INSULATED SIDE HINGED GARAGE DOORS
56 57
INSULATED SECTIONAL DOOR OPTIONS
Cardale Sectional garage doors - optional extras
Wicket Doors - iso45 for horizontal rib, large rib and flush (woodgrain whiteand smooth finish) size exceptions occur, check when ordering. Add £1170
Wicket Door - Horizontal Rib Wicket Door - Large Rib
Wicket Door - Flush
Manual Locking with Black ‘D’ handle Add £56
Metallic lever door handles (White, Brass, Silver and Antique bronze effect) Add £177
Low head rear mount kit for iso45 doors where required. Add £123
Aluminium Renovation Profile For all types of Cardale sectional overhead doors. Allows the door to be fitted at the front of the opening and overlapping onto outer brickwork structure (conceals poor brickwork). Add £467
Between fix frame brackets (rear mount doors only) Use when fitting between aperture or limited sideroom. Bridges bricks or insulation cavity. Pack of ten Add £67
Sunrise Pattern Glazing - iso45 panelled doors, standard sizes Available in white RAL 9016 or brown RAL 8014
Co-ord. width 2000 - 2600 mm
Add £359 Co-ord. width 2601 - 3500 mm
Add £481 Co-ord. width 3501 - 4000 mm*
Add £601 Co-ord. width 4001 - 4500 mm
Add £720 Co-ord. width 4501 - 5500 mm*
Add £779
Delivery for Sunrise glazing 2-3 weeks (items marked * delivery 6 weeks).
V1Plain
clear / crystal
V2Rhombus
clear / crystal
V3Cross
clear / crystal
V4dDiamond leaded
clear / crystal
V4sSquare leaded clear / crystal V7 - Light Strip
POAV8 - Portholes
£355V8 - Square
£338
3 dimensional fitting brackets Perfect fixing brackets for door frames in case of slanted side walls, often used for prefabricated concrete garages. Fixing bracket adjustable from 70 – 110°. Pack of ten Add £67
min. 90min. 907676
> 50
158-
178
min. 14min. 14
All dimensions in mm
135175
70° - 110 °
70° - 110 °
All dimensions in mm
Wicket Doors
TECHNICAL INFORMATION
Lateral cross section
Min. Headroom
Required
16mm
FFL
SpecificationThe door panels are made of self supporting steel construction,double-skinned with CFC free foam between two steel cover skins,fully galvanised with base paint.
Woodgrain texture on outer face of all panels, all styles (narrow rib,flush and panelled).
Panel thickness of 45mm, with heat insulation value of K = 0.5 W/m2K.
Galvanised header track with fastening anchor.
Header, floor and side seals are preassembled (continuous brushseal on 4 sides).
Side rebate - lock side must be at least 70mm.
Side rebate - curve side must be at least 340mm.
Headroom must be at least 100mm.
Installation dimensions
Direction of door travel
Standard side room
Standard side room
Direction of door travel
340mm min
340mm min
70mm min
70mm min
LEFT HAND
Reduced side room
Reduced side room
Direction of door travel
Direction of door travelRIGHT HAND
150mm to
340mm
150mm
to 340mm
70mm min
70mm min
Brickwork Opening Height
BWO Width BWO Width
BWO Width BWO Width
Side Sectional Garage Doors
Technical information
58 59
Technical information
TECHNICAL INFORMATION
iso45 & 20 Overhead Sectional Garage Doors E® Spring up to 3000mm wide x 2700mm high iso45 & 20 Overhead Sectional Garage Doors E® Spring up to 3000mm wide x 2700mm high
Technical information
Ordering informationTo calculate the correct door order size to fit within a structural opening, deduct 180mm from the width and 120mm (rear mount) or 215mm (front mount) from the height. For behind the reveal fit calculate from drawings (using required headroom for front/rear mount).
Required installation dimensions
BRB = Coordinating width (order size)BRH = Coordinating height (order size)DH = Ceiling height (minimum dimension)GIB = Interior garage width (minimum dimension)EBT = Installation depth of the doorEBTN = Installation depth of garage door with Novomatic operatorsRAMB = Outer frame widthRAMH = Outer frame heightOFF = Upper-edge finished floorLDH = Clear passage height
Please consult the “Coordinating widths and heights” chart or calculate the dimensions based on the drawings.If the structure does not have the required minimum dimensions, it can be compensated by fitting panels and profiles.
All dimensions in mm.
Vertical section through garage door
All dimensions in mm.
Horizontal section through garage door
iso45 sizes above 3000mm x 2700mm are supplied with front mount torsion spring as standard.All sectional doors including wicket doors are supplied with front mount torsion spring as standard.
60 61
Technical information
TECHNICAL INFORMATION
iso45 Overhead Sectional Garage Doors Torsion Springs iso45 Overhead Sectional Garage Doors Torsion Springs
Technical information
Fitting within the openingRear mounted torsion spring detail
Fitting behind the openingFront mounted torsion spring detail
Order ref
height
Standard size heights
M1 M2 M3 M4
6’4” 1925 2045 2050 2690
6’6” 2000 2120 2125 2765
6’10” 2075 2195 2200 2840
7’0” 2125 2245 2250 2890
Order ref
height
Standard size heights
M1 M2 M3 M4
6’4” 1925 2140 2145 2505
6’6” 2000 2215 2220 2580
6’10” 2075 2290 2295 2655
7’0” 2125 2340 2345 2705
CPH Clear Passage Height (with NovoPort®)
COH (M1) Co-ord Height
OFH (M2) Outer Frame Height
CH (M3) min. Ceiling Height
ID (M4) min. Installation Depth
CPH Clear Passage Height (with NovoPort®)
COH (M1) Co-ord Height
OFH (M2) Outer Frame Height
CH (M3) min. Ceiling Height
ID (M4) min. Installation Depth
M4 ID
M4 ID
M2
OFH M2
OFH
M3
CH M3
CH
M1
COH M1
COH
M1
CPH CPH
COH
minusCOH
minus
COH
minusCOH
minus
ca.120
OFFOFF 180180
104
104
240
240
min. 5
(with manual operation
min. 5
(with manual operation
Torsion spring shaft with rope drum
Torsion spring shaft with rope drum
Upp
er-e
dge
hori
zont
al r
ail =
M1
heig
ht +
68
Upp
er-e
dge
hori
zont
al r
ail =
M1
heig
ht +
68
NovoPort®
NovoPort®
120mm
Door order
ref
70mm
70mm 70mm
90mm 90mm
76mm 76mm14mm 14mm
Door order ref
M1 Door order
ref
215mm 76mm 76mm
Clear drive through opening
Door order ref90mm 90mm
All doors with Wicket doors have torsion springs
62 63
Technical information
TECHNICAL INFORMATION
Matching Side Doors Matching Side Doors
Technical information
Side door handing options
(Please specify when ordering)
iso45 sectional matching side doors
(To match iso20 and iso45 steel sectional overhead doors)
Up & over one piece matching side doors
(To match steel and timber infill doors)
Right outside Left outside Left inside Right inside
Outside
Inside
Order ref width W1 W2 W3 W4
875 932 862 832 945
1000 1057 987 957 1070
Door order ref Order sizes Clear passage
875 x 2000 995 x 2060 845 x 1970
875 x 2125 995 x 2185 845 x 2095
1000 x 2000 1120 x 2060 970 x 1970
1000 x 2125 1120 x 2185 970 x 2095
Door opening inwards
vertical section
Door opening inwards - standard size
horizontal section
Standard sizes horizontal rib, large rib, flush, raised panel
Door opening inwards and outwards - special size
horizontal section
Door opening inwards and outwards
vertical section
W1 Outer frame width
Oute
r fra
me
heig
ht
Oute
r fra
me
heig
ht
Clea
r pas
sage
dim
ensi
on
Clear passage dimension
Clear passage dimension
Outside
Outer frame widthOuter frame width
Clea
r pas
sage
dim
ensi
on
Outs
ide
Outs
ide
6mm 6mm
W3 Clear passage dim
W4 Structural opening
W2 Internal frame dim
M1
Stru
ctur
al o
peni
ng h
eigh
t
Clea
r pas
sage
dim
ensi
on
Inte
rnal
fram
e
Oute
r fra
me
heig
ht
5mm
M4
M3
M2
Order ref height M1 M2 M3 M4
2000 2055 1978 2000 2050
2125 2180 2103 2125 2175
Frame leg dimensions 68mm wide x 55mm deep
Frame leg dimensions 68mm wide x 55mm deep
64 65
H1 = Internal Frame Height
H2 = Minimum Height from floor to underside of ceiling
H3 = Minimum Brickwork Opening Height
H4 = Clear Drive Through Height (Internal Handle is the lowest point)
H5 = How far the door extends into the garage from the back of the brickwork opening
H6 = Kick Up (The height above the Internal Frame Height the door panel rises during the opening cycle)
R = The Arc of travel of the bottom edge of the door
C = The canopy (How far the door protrudes from the frame front)
Note:- The Kick up is greater than the frame Lintel Height and peeks above the Lintel at 1100mm into the garage from the frame front
Frame Header Dimensions 45mm high 40mm deep
W1 = Internal Frame Width
W2 = Clear Drive Through Width
W3 = Minimum Brickwork Opening (fitting behind)
W4 = Recommended Brickwork Opening Width
W5 = Recommended Brickwork Opening Width
Door height =H1+50 =H1 =H1-150
imp mm H1 H2 H3 H4 H5 H6 R C
6’4” 1931 1931 1981 1931 1781 1300 49 675 625
6’6” 1981 1981 2031 1981 1831 1300 49 725 657
6’10” 2085 2085 2135 2085 1935 1300 49 825 775
7’0” 2134 2134 2184 2134 1984 1300 49 880 825
Common dimensions 54mm wide frame x 40mm wide frame
Door width =W1 =W1+24
imp mm W1 W2 W3 W4 W5
6’10” 2085 2085 2085 2109 2193 2199
7’0” 2134 2134 2134 2158 2242 2248
7’3” 2210 2210 2210 2234 2318 2324
7’5” 2261 2261 2261 2285 2369 2375
7’6” 2286 2286 2286 2310 2394 2400
8’0” 2438 2438 2438 2462 2546 2552
Fitting behind the opening
Fitting within the opening
W4
W3
Frame
W1
W4
W5
W3 A / B
110mm
30mm
(Adi 15mm)
54mm
H2
H3
H1
H4
R
C H5H6
Standard Door Heights Standard Door Widths
Technical information
TECHNICAL INFORMATION
Single Up & Over Garage Doors. Canopy Gear Type Single Up & Over Garage Doors. Canopy Gear Type
Technical information
W2
W1 W2
66 67
Technical information
TECHNICAL INFORMATION
Up & Over Garage Doors. Single Retractable Gear Type Up & Over Garage Doors. Single Retractable Gear Type
Technical information
H1 = Internal Frame Height
H2 = External Frame Height
H3 = Minimum Brickwork Opening Height
H4 = Clear Drive Through Height (Internal Handle is the lowest point) For manual doors only
H5 = How far the door extends into the garage
R = The arc of travel of the bottom edge of the door
C = The canopy (How far the door protrudes from the frame front)
W1 = Internal Frame Width
W2 = Minimum Brickwork Opening
W3A = Clear Drive through Width – Above the Crank of the Pivot Arm
W3B = Clear Drive through Width – Below the Crank of the Pivot Arm
W4 = External Frame Width
W5 = Recommended Brickwork Opening Width
NOTE When the Side Wall is between 400 and 750mm away from the opening aperture then an additional bracing kit is required to support the Rear Spacer Bar
For Doors with Frame header 45mm High and 40mm Deep (Steel and Timber Doors)
Door height =H1+45 =H1 = H1-150 Lever Arm Crank HeightImp mm H1 H2 H3 H4 H5 R C
6’6” 1981 1981 2026 1981 1831 1735 1020 225 1030
7’0” 2134 2134 2180 2134 1984 1890 1100 265 1100
Common Dimensions 70mm wide frameFOR GRP DOORS
68mm Wide Frame
Door Width 70mm Wide =W1+24 =W1-100 =W1-36 =W1+140 =W1+160 = W1 + 136 =W1 + 146
Imp mm W1 W2 W3A W3B W4 W5 W4 W5
6’10” 2085 2085 2109 1985 2049 2225 2245 2221 2231
7’0” 2134 2134 2158 2034 2098 2274 2294 2270 2280
7’3” 2210 2210 2234 2110 2174 2350 2370 2346 2356
7’5” 2261 2261 2285 2161 2225 2381 2421 2397 2407
7’6” 2286 2286 2310 2186 2250 2426 2446 2422 2432
8’0” 2438 2438 2462 2338 2402 2580 2598 2574 2584
9’0” 2743 2743 2767 2643 2707 2883 2903 N / A N / A
10’0” 3048 3048 3072 2948 3011 3188 3208 N / A N / A
Fitting within the opening
Fitting behind the opening
Frame Leg Dimensions
Height = 70mm
Depth = 40mm
C H5
H2
H3 H1 H4
R
W4
W2
Frame
W1
W1
W4
W5
W3 A / B
60mm
(Adi 30mm)
30mm
(Adi 20mm)
70mm
Standard Door Heights Standard Door Widths
For doors with Frame Header 68mm High and 60mm Deep (GRP DOORS)
Door height =H1+68 =H1 = H1-100 Pivot Arm Crank HeightImp mm H1 H2 H3 H4 H5 R C
6’6” 1981 1981 2049 1981 1881 1880 800 40 1050
7’0” 2134 2134 2202 2134 2034 1880 1030 230 1200
68 69
Technical information
TECHNICAL INFORMATION
Double Up & Over Garage Doors. Retractable Gear Type Double Up & Over Garage Doors. Retractable Gear Type
Technical information
H1 = Internal Frame Height
H2 = External Frame Height
H3 = Minimum Brickwork Opening Height
H4 = Clear Drive Through Height (Internal Handle is the lowest point)
H5 = How far the door extends into the garage
R = The arc of travel of the bottom edge of the door
C = The canopy (How far the door protrudes from the frame front, Assumes 70mm thick frame)
K = Kick up = 43mm
W1 = Internal Frame Width
W2 = Minimum Brickwork Opening
W3A = Clear Drive through Width – Above the Bottom of the Pivot Arm
W3B = Clear Drive through Width – Below the Bottom of the Pivot Arm
W4 = External Frame Width
W5 = Recommended Brickwork Opening Width
Door height =H1+68 =H1 = H1-150
Imp mm H1 H2 H3 H4 H5 R C
6’6” 1981 1981 2048 1981 1831 1870 900 60
7’0” 2134 2134 2202 2134 1984 1870 1040 210
7’6” 2286 2286 2354 2286 2136 1870 1180 360
8’0” 2438 2438 2506 2438 2288 1870 1320 510
Common dimensions 70mm Wide Frame
Door width =W1+24 =W1-120 =W1-50 =W1+140
Imp Mm W1 W2 W3A W3B W4 W5
8’0” 2438 2438 2462 2318 2388 2578 2588
10’0” 3048 3048 3072 2928 2998 3188 3198
12’0” 3657 3657 3682 3537 3607 3797 3807
14’0” 4267 4267 4291 4147 4217 4407 4417
16’0” 4877 4877 4901 4757 4827 5017 5027
Fitting behind the opening
Fitting within the opening
Frame Header Dimensions
Height = 68mm
Depth = 75mm
NOTE – The Bottom of the Pivot Arm when the door is open is
820mm from the floor on 1981mm high doors
970mm from the floor on 2134mm high doors
1120mm from the Floor on 2286mm high doors
Frame Leg Dimensions
Width = 70mm
Depth = 75mm
W4
W2
Frame
W1
W1
W4
W5
W3 A / B
70mm
(Adi 45mm)
50mm
(Adi 25mm)
70mm
C H5
H2
H3 H1 H4
R
Standard Door Heights Standard Door Widths
70 71
Technical information
TECHNICAL INFORMATION
DuoPort Side Hinge Door Gear Type British Manufactured DuoPort SF Side Hinge Door Gear Type
Technical information
Door width =W1+144 =W1+154 =W1-116
imp mm W1 W2 W3 W4
6’6” 1981 1981 2125 2135 1865
7’0” 2134 2134 2278 2288 2018
7’6” 2286 2286 2430 2440 2170
8’0” 2438 2438 2582 2592 2322
Door width =W1+100 =W1+110 =W1-100
imp mm W1 W2 W3 W4
6’6” 1981 1981 2081 2091 1881
7’0” 2134 2134 2234 2244 2034
7’6” 2286 2286 2386 2396 2186
8’0” 2438 2438 2538 2548 2338
Door Height =H1+72 =H1+77 =H1
imp mm H1 H2 H3 H4
6’6” 1981 1981 2053 2058 1981
7’0” 2134 2134 2206 2211 2134
7’6” 2286 2286 2358 2363 2286
Door Height =H1+50 =H1+55 =H1-20
imp mm H1 H2 H3 H4
6’6” 1981 1981 2031 2036 1861
7’0” 2134 2134 2184 2189 2114
7’6” 2286 2286 2336 2341 2266
W1 = Internal Frame Width
W2 = External Frame Width
W3 = Recommended Brickwork Opening Width – Fitting between the brickwork
W4 = Clear Drive through Width – Door Open to 90 Degrees
Frame Leg Dimensions – 72mm Wide – 70mm Deep
Order by Brickwork Opening Dimensions or External Frame Size Required
W1 = Internal Frame Width
W2 = External Frame Width
W3 = Recommended Brickwork Opening Width – Fitting between the brickwork
W4 = Clear Drive through Width – Door Open to 90 Degrees
Frame Leg Dimensions – 50mm Wide – 63mm Deep
H1 = Internal Frame Height
H2 = External Frame Height
H3 = Minimum Brickwork Opening Height
H4 = Clear Drive through Width (Internal Weather Seal is the lowest point) (Door stay if fitter are lower locally by 60mm)
Frame Header Dimensions – 72mm High – 70mm Deep
Floor Threshold - 19mm High
H1 = Internal Frame Height
H2 = External Frame Height
H3 = Minimum Brickwork Opening Height
H4 = Clear Drive through Width (Internal Weather Seal is the lowest point) (Door stay if fitter are lower locally by 60mm)
Frame Header Dimensions – 50mm High – 63mm Deep
Floor Threshold - 19mm High
Standard Door Widths Standard Door Widths
Standard Door Heights Standard Door Heights
Fitting within the opening Fitting within the opening
H3 H3H2 H2H1 H1H4 H4
W3 W3
W2 W2
W4 W4
W1 W1
72 73
Steel Line Roller Doors
Technical information
TECHNICAL INFORMATION
Insulated Roller Garage Doors
Standard & mini steel-line roller doors and brickwork aperture
Fitting within the aperture
Fitting onto the aperture
SIDE CLEARANCE: 70/90mm (65mm) is required only if the guides are to be fully concealed. A minimum of 40mm (30mm) is required to give sufficient room for fixing but a portion of the guide tracks (white as standard) will be visible.
Between reveals
Internal/external
Standard Limited side clearance Retaining existing subframe
Between walls
Fixing options
Fixing options
300mm (Thermaglide77)205mm (Thermaglide55)
270mm (Thermaglide77)205mm (Thermaglide55)
300mm (77)205mm (55)
270mm (77)205mm (55)
80mm
FFL to top of guide
FFL to top of guide
FFL to top of end
plate Clear opening height
Clear opening height
Clear structural
height
Clear structural
height
Available headroom
Aperture width
Overguide width
70/90mm min (Thermaglide77)65mm min (Thermaglide55)
70/90mm min (Thermaglide77)65mm min (Thermaglide55)
Aperture width
Overguidewidth
70/90mm min (Thermaglide77)65mm min (Thermaglide55)
FFL to top of end
plate
Technical information
• Steel-line Roller Doors are specified by brickwork opening size
• There are two sizes of curtain edge guides
• Series “A” 30mm Wide and for brickwork up to 9’6” (2896mm)
• Series “AA” 50mm for Brickwork over 2897mm and Openings over 2438mm High
Steel-line Mini Roller Door – MAXIMUM SIZE = 3048 x 2134mm (10’0” X 7’0”)
Headroom
The minimum Headroom clearance between the bottom of the lintel and the ceiling will vary according to the door height required.
For Standard Doors
For Doors up to 2438mm (8’0”) High 431mm (17”) is requiredFor Doors from 2438mm (8’0”) to 3048mm (10’0”) High 483mm (19”) is required
For Mini Doors
For Doors up to 2134mm (7’0”) High 343mm (13 1/2”) is required
The Stated headroom for a given height is only required if the door roll is to be hidden from outside view If the headroom is restricted it is possible to drop the curtain roll by up to 100mm, this will have a corresponding effect on the drive through height
Automating the doorWhen adding an side mounted operator to the curtain an addition amount of side room is required on one side
For a Standard Steel-line Roller door add an additional 30mm to the side room requirement on the side the operator will be fixed
For a Mini Steel-line Roller door add an additional 75mm to the side room requirement on the side the operator will be fixed
Side clearance
Opening width
Opening height
Headroom
500mm
Headroom
80mm
Door height
Minimum Clearances – Width
Brickwork Opening Width
(BWO)
Curtain Width (mm)
Total Width including fixing brackets
“A” = BWO + (2 x 95)mm “AA” = BWO + (2 x 115)mm
1219mm (4’0”) 1270 1460
1829mm (6’0”) 1880 2070
2134mm (7’0”) 2185 2375
2286mm (7’6”) 2335 2525
2438mm (8’0”) 2488 2678
2591mm (8’6”) 2793 2983
2743mm (9’0”) 2919 3109
3048mm (10’0”) 3148 3378
3353mm (11’0”) 3453 3683
3658mm (12’0”) 3758 3988
4267mm (14’0”) 4367 4597
5000mm (16’5”) 5100 5330
Minimum Clearances
Notes
• When the door is open the curtain roll extends back into the garage by 500mm for all door heights
• The bottom edge of the curtain is expected to hang down below the lintel by 80mm in normal
Conditions, IE the drive through height will be 80mm less than the aperture height
74 75
Warranty & maintenance
Up & Over Garage Door SystemsThe purchaser is granted a warranty covering the safe and reliable operation of the Cardale garage door for a period of 10 years from the date of purchase. This warranty is conditional on the regular inspection and maintenance of the product in accordance with the installation manual supplied with the door. During the guarantee period the manufacturer undertakes to repair, without charge, any product which has suffered a proven failure of its safe and reliable operation provided that the springs, tracks and guide rollers have been inspected regularly (at least once a year) and maintained correctly, including replacement of worn items when required. All Cardale garage doors offer a 10 year warranty against the integrity of the door panel, as well as 2 years on rollers and springs for normal use, up to 25 open and close cycles a day. All retractable garage doors offer a 10 year manufacturer’s guarantee (2 years for canopy doors) on material and manufacturing faults of all immovable frame parts, if it can be proved that they are inoperative, or their use is impaired. In the case of Novoferm steel doors, these are supplied factory prefinished in polyester based white. They are not immune to damage which can occur at any stage of the handling of the product from factory to site. Minor surface damage can be easily repaired using touch-up sprays or sticks without invalidating warranties. The corrosion of swarf filings or other air borne particles, rusting or staining of the panel is not considered as panel rust. Cardale timber doors use organically grown Cedar from replenishable sources, with natural colour and grain variations - this is a feature of Cedar. We make every effort to harmonise the effect, where possible, by hand matching the component parts used in construction. Please note that a uniform grain pattern cannot be guaranteed. Timber doors must be finished in accordance with the installation instructions, supplied with the door and the technical specification. Cardale timber doors are supplied with a temporary finish. As soon as the door is unwrapped one coat of a good quality basecoat primer must be applied to both sides of the door. Immediately after installation your timber doors require two further coats of a good quality exterior wood finish on both sides. Initial application and periodic treatment should be carried out strictly in accordance with the wood stain manufacturer’s instructions. Failure to follow these instructions will result in early deterioration of the timber panel. Please note that protective finishes on all Timber doors must be applied to validate warranty.
Sectional Garage Door SystemsThe purchaser is granted a warranty covering the safe and reliable operation of the Cardale garage door for a period of 10 years from the date of purchase. This warranty is conditional on the regular inspection and maintenance of the product, in accordance with the installation manual supplied with the door. During the guarantee period the manufacturer undertakes to repair, without charge, any product which has suffered a proven failure of its safe and reliable operation provided that the springs, wire cables, tracks, guide rollers and hinges have been inspected regularly (at least once a year) and maintained correctly, including replacement of worn items when required. All Cardale garage doors offer a 10 year warranty against the integrity of the door panels, as well as 2 years on rollers, springs, pulleys and cables for normal use, up to 25 open and close cycles a day. All Novoferm garage doors offer a 10 year manufacturer’s guarantee on floor seals, central seals, side seals and header seals against perishing. All Cardale garage doors offer a 10 year manufacturer’s guarantee on material and manufacturing faults of all immovable frame parts, if it can be proved that they are inoperative, or their use is impaired. Furthermore, Cardale fully finished steel doors (i.e. factory finish painted, Golden Oak, Rosewood) come with a 10 year panel corrosion guarantee relating to rust through inside or outside. If a panel rusts through, then the affected panel only will be replaced. Due to weathering, the new panel may not exactly match the colour of the old. In this instance the door should be repainted by the customer with a proprietary paint system, following the paint manufacturers’ instructions. All steel parts are not covered by the corrosion warranty if situated within 3 miles of the coastline. In areas of high corrosion, (e.g. if exposed to sea air), the door panels should be painted with a proprietary paint system, following the paint manufacturers’ instructions and the door should be regularly cleaned. The corrosion of swarf filings or other air borne particles, rusting or staining of the panel is not considered as panel rust. The surface finish of Rosewood and Golden Oak foil finished sectional door panels is guaranteed from serious degradation for a period of 5 years, provided that regular maintenance including cleaning from salt is carried out in accordance with our instructions. During this period the colour of the door panels may change due to weathering (e.g. Intense UV radiation and coastal conditions etc). This is normal and is not covered by the warranty. In the case of Cardale pre-finished steel doors, these are supplied with polyester based primer paint finish. They are not immune to damage which can occur at any stage of the handling of the product, from factory to site. Minor surface damage can be easily repaired using touch-up sprays or sticks without invalidating warranties. Cardale Timber sectional doors are supplied unfinished, please ensure that a full specification of finishing coats are applied immediately before or after installation to all exposed surfaces - inside and out, with a Sikkens or similar finishing coat system. Please note that protective finishes on all Timber doors must be applied to validate warranty.
Cardale Insulated Roller Garage Door Systems The purchaser is granted a warranty covering the safe and reliable operation of the garage door for a period of 10 years from the date of purchase. This warranty is conditional on the regular inspection and maintenance of the product, in accordance with the installation manual supplied with the door. During the guarantee period the manufacturer undertakes to repair, without charge, any product which has suffered a proven failure of its safe and reliable operation, provided that the door has been inspected regularly (at least once a year) and maintained correctly, including replacement of worn items when required. Cardale Insulated Roller Garage Doors are guaranteed against any form of manufacturing defects for a period of 2 years from the date of purchase. The finish of white powder coated doors is guaranteed for a period of 2 years. In the case of textured woodgrain finished doors, the exterior finish is guaranteed to provide an effective weatherproof membrane which will resist perforation of the door from the weather-side due to corrosion for 10 years. Furthermore, colour change or fade to the exterior surface will be limited and uniform for the full 10 year period. Some marking may occur at the top of the internal side of the door curtain, this is unavoidable and is due to prolonged contact with autolock system
Cardale Garage Door AutomationFor garage door operators: DC650 and DC800 we grant the following warranty, in case of supplying us with the original invoice: 5 years for mechanical parts of the operator motor and the control unit; 2 years for remote control parts and accessory parts. A 2 year warranty is also granted for remote control parts and accessory parts. No warranty claims will be accepted for wear and tear parts and consumable parts (e.g. light bulbs, batteries, fuses). Cardale Insulated Roller Garage Door electric operators are guaranteed against any form of manufacturing defect for a period of 5 years for mechanical elements, motors and transformers. The motor control unit is guaranteed for 3 years. Remote control accessories and parts are guaranteed for a period of 2 years. No warranty claims will be accepted for wear and tear parts and consumable parts (e.g. light bulbs and batteries and remote control handsets).
Door MaintenanceIf in doubt about any maintenance procedures, please consult a Cardale specialist. Cardale has a nationwide network of installers who can offer you regular maintenance service on your garage door. Please call Cardale on 01582 563777 or check our website for details of your nearest installer. Immediately after the door is fitted and after every 5,000 operations of the door, or at least once a year, oil all pivot points and check tightness of screws and clamped connections. Keep running tracks clean (do not grease them), check all parts and replace any worn components. The springs should be replaced by an experienced door fitter after approximately 25,000 operations (see fitting and operating instructions). You should not oil the lock cylinder. If it is sticking, lubricate it with graphite dust. If you have a canopy door, check the cable every 6 months of normal usage (8 operations per day). If you find any wear, you should have the cables replaced by an expert installer.
WARRANTY TERMS AND CONDITIONS
Warranty In the unlikely event of a warranty claim becoming necessary please contact the dealer or distributor who supplied the door.To enable your claim to be processed without delay you should provide the following information:• Your name, address and contact telephone number• The original invoice and date of purchase• A description of the door, the door type and the product number• A description of the reason for the claim
Your dealer will then supply details of your claim, together with a copy of the warranty card supplied with the door and proof of purchase, to the warranty department at Cardale. An assessment of the claim will be made. This may mean Cardale will need to come and inspect your door at your premises. In the event that there is no legitimate claim under the terms of the warranty you may be liable for the costs of this visit. It is essential that you take note of the care and usage instructions provided with your door and you follow these instructions throughout the lifetime of your door.
The warranty does not cover:• Improper installation• Normal wear and tear• Priming and other surface protection treatments• Negligent or wanton destruction• Incorrect or too late applied surface protection treatments• Repair by a non-qualified installer• Use of non-Cardale parts without the approval of Cardale• Damage or removal of the product number or making it unidentifiable• Improper operation• External influences, such as fire, salts, water, acids, alkaline solutions, abnormal environmental influences• Mechanical damage caused by improper transport or installation All dark colours which are exposed to direct sunlight should be avoided. Dark coloured doors may undergo expansion due to heat absorption. Such instances are not covered by the guarantee, however normal performance will revert when the door has cooled down if the heat absorption has affected the door’s performance. All colour samples depicted in this brochure are as close to the original manufacturer’s colours as possible. Garage doors supplied may vary in colour from the brochure representation.
PricesAll orders are accepted on the understanding that the goods will be subject to the prices ruling at the time of delivery, unless other terms are specifically agreed. All prices are in £ sterling and exclude VAT. UK mainland delivery is included to the buyer’s trading address - delivery to site £54.00 (subject to access). A 25% handling charge applies to all unwanted items on standard stock items only. Items must be returned unopened and in an unused condition. All returns are subject to acceptance by Cardale Garage Doors. All doors are bespoke and made to order. Your right to cancel is not available on non-standard made to order doors.
SpecificationDue to the progressive outlook of Cardale we reserve the right to alter specifications to design and manufacture without notification. All specifications and details are correct at the time of publication, errors and omissions excepted.
All DoorsColour match pairs of doors should be ordered together to obtain the best colour match, bearing in mind the limitations of the materials used in the construction. Timber garage doors cannot be ordered as matching sets.
Size variations As the size of a door changes in height and/or width, the panel frequency and profile can change, therefore doors of the same style but of different sizes can be significantly different in appearance.
Clearances All doors require operating clearances, i.e. the gap between the door panel and frame opening, these are inbuilt during manufacture and should not be reduced by means of infills, or draught-proofing.
Deflection When in the open position, all doors will display a level of vertical deflection or ‘sag’ across the width of the panel. Individual manufacturers’ specifications should be consulted for exact tolerances.
Terms and conditions
76
Cardale Garage DoorsUnit 5-9 Luton North Industrial Estate, Sedgwick Road, Luton LU4 9DTt: 01582 563777 f: 01582 568801 www.cardale.co.ukOpening times: Mon-Fri 8.30am - 5.00pm G A R A G E D O O R S
Your Cardale Stockist
Car
dale
rese
rves
the
righ
t to
alte
r sp
ecifi
catio
ns to
des
ign
and
man
ufac
ture
with
out n
otifi
catio
n.
All s
peci
ficat
ions
are
cor
rect
at t
ime
of p
ublic
atio
n, e
rror
s an
d om
issi
ons
exce
pted
.