cantilever - security bollards, bike rack, security gate, automatic … · 2020. 12. 15. ·...
TRANSCRIPT
✆ 1 3 0 0 7 8 0 4 5 0✆ 1 3 0 0 7 8 0 4 5 0
Industrial
Gates shownare viewed from
secure side
All gates shown left hand opening. Right hand opening is also available,
please specify preference.
Advantage
Undercarriage option availableon Industrial models.
Advantage
Industrial
Security
High Security
Anti-terrorist*
2828
P roduc t Range > Gates > Cant i l e v e r
Duty Level Code Width Height Gate Top Range Range Infill • Extension • Advantage CLA 3.0m-5.0m 1.8m / 2.1m RHS Pickets TN / TH 0.1m increments only only only Industrial ICL 3.0m-8.0m 1.8m-2.7m Full Range Full Range 1.0m increments 0.3m increments ICLU 3.0m-6.0m 1.8m / 2.1m Full Range Full Range Undercarriage 1.0m increments Security CLS 5.0m-10.0m 1.8m-3.0m Full Range Full Range 1.0m increments 0.3m increments
High Security CLSH 5.0m-8.0m 1.8m-3.6m Full Range Full Range 1.0m increments 0.3m increments
Anti-terrorist* CG4 / CG12 3.0m-9.0m 2.1m only Full Range Full Range • Refer p17 for details
The major feature of Leda’s cantilever gates is that they are only supported at one end and are designed to operate without the need for a surface mounted track across the driveway. This is normally benefi cial when there are large volumes of, or heavy, vehicular traffi c. They require less space than swing gates and are easier to safeguard.
Cantilever gates are subject to reduced maintenance costs, making them a more reliable option than track sliding gates.
There are fi ve cantilever gate types, each providing options to make gate selection an easy task. Steel sections (RHS) used during manufacture increase in size and wall thickness through the gate types to provide different levels of security.
An alternative undercarriage system for Industrial models is designed for sites with insufficient room to install a running rail, or where site conditions such as snow drifts, effect operation.> Refer p33 for details.
There is also a choice of drive motors / gear boxes catering for both low and high operational requirements.> Refer p33 for details.
✆ 1 3 0 0 7 8 0 4 5 0✆ 1 3 0 0 7 8 0 4 5 0
Security
High Security
Anti-terrorist*
* Details of Leda anti-terrorist gates and other Leda high security products are not detailed or specified for security reasons. Please contact your nearest Leda sales office where your enquiry will be dealt
with by an appropriately qualified consultant.
29
Gates 12
Track 18
Cantilever 28
Swing 36
Bi-fold 42
Boom 46
General 58
29
G a t e sP roduc t Range > Gates > Cant i l e v e r
Manual Operation Raking Finish Available Available Hot Dip Gal Powdercoat Wet Spray
Standard No Incl Opt Opt
Yes Yes Incl Opt Opt up to 5.0m only
Yes Yes Incl Opt Opt up to 5.0m only
Yes Yes Incl Opt Opt(not recommended) up to 5.0m only
No No Incl Opt Opt up to 5.0m only
Yes No Incl Opt Opt up to 5.0m only
Full specification details for Leda gates can be
downloaded from the website as a PDF document.
www.ledasecurity.com.au/gates > (gate type) > specification
✆ 1 3 0 0 7 8 0 4 5 0✆ 1 3 0 0 7 8 0 4 5 0
Industrial
Advantage
Clear Opening 3m-5m(1m increments)
Clear Opening 3m-8m(1m increments)
1.8m-2.1m(0.1m increments)
1.8m-2.7m(0.3m increments)
FabricationGalvanised RHS
Running Rail150 x 100
Bottom Rail100 x 50
Frame50 x 50
FabricationGalvanised RHS
Running Rail125 x 75150 x 100200 x 100
(dependent upon span)
Bottom Rail125 x 75
Frame75 x 75
Viewed fromsecure side
MostPopularModel
Viewed fromsecure side
3030
P roduc t Range > Gates > Cant i l e v e r
Cantilever Industrial Width Range Height Range Gate Infill Top ExtensionICL 3.0m-8.0m (+1.0m) 1.8m-2.7m (+0.3m) Full Range • Full Range •
• Refer p17 for details
Cantilever Advantage Width Range Height Range Gate Infill Top ExtensionCLA 3.0m-5.0m (+1.0m) 1.8m-2.1m (+0.1m) RHS Pickets only • TN / TH only •
• Refer p17 for details
✆ 1 3 0 0 7 8 0 4 5 0✆ 1 3 0 0 7 8 0 4 5 0
High Security
1.8m-3.6m(0.3 increments)
1.8m-3.0m(0.3 increments)
Clear Opening 3m-8m(1m increments)
Clear Opening 5m-10m(1m increments)
Security
FabricationGalvanised RHS
Running Rail200 x 100
Dual Bottom Rail200 x 100
Frame100 x 100
FabricationGalvanised RHS
Running Rail150 x 100200 x 100
(dependent upon span)
Bottom Rail150 x 100200 x 100
(dependent upon span)
Frame100 x 100
Viewed fromsecure side
Viewed fromsecure side
31
Gates 12
Track 18
Cantilever 28
Swing 36
Bi-fold 42
Boom 46
General 58
31
G a t e sP roduc t Range > Gates > Cant i l e v e r
Cantilever High Security Width Range Height Range Gate Infill Top ExtensionCLSH 3.0m-8.0m (+1.0m) 1.8m-3.6m (+0.3m) Full Range • Full Range •
• Refer p17 for details
Cantilever Security Width Range Height Range Gate Infill Top ExtensionCLS 5.0m-10.0m (+1.0m) 1.8m-3.0m (+0.3m) Full Range • Full Range •
• Refer p17 for details
✆ 1 3 0 0 7 8 0 4 5 0✆ 1 3 0 0 7 8 0 4 5 0
2.1m
Anti-terrorist
2.1m
Clear Opening 3m-9m(1m increments)
Clear Opening 3m-9m(1m increments)
CG4
Anti-terrorist
CG12
Details of Leda anti-terrorist gates and other Leda high security products are not detailed or specified for security reasons. Please contact your nearest Leda sales office where your enquiry will be dealt with by an appropriately qualified consultant.
Details of Leda anti-terrorist gates and other Leda high security products are not detailed or specified for security reasons. Please contact your nearest Leda sales office where your enquiry will be dealt with by an appropriately qualified consultant. Viewed from
secure side
Viewed fromsecure side
K12 Certified by US Department of State.
(Equivalent to ASTM F2656-07 M50.)Manufactured under licence to
APSG (American Physical Security Group).
K4 Certified by US Department of State.
(SD-STD-02.01)Manufactured under licence to
APSG (American Physical Security Group).
3232
P roduc t Range > Gates > Cant i l e v e r
Cantilever Anti-terrorist Width Range Height Range Gate Infill Top ExtensionCG4 3.0m-9.0m (+1.0m) 2.1m only Full Range • Full Range •
• Refer p17 for details
Cantilever Anti-terrorist Width Range Height Range Gate Infill Top ExtensionCG12 3.0m-9.0m (+1.0m) 2.1m only Full Range • Full Range •
• Refer p17 for details
✆ 1 3 0 0 7 8 0 4 5 0✆ 1 3 0 0 7 8 0 4 5 0
Undercarriage
Viewed fromsecure side
33
Gates 12
Track 18
Cantilever 28
Swing 36
Bi-fold 42
Boom 46
General 58
33
G a t e sP roduc t Range > Gates > Cant i l e v e r
Can t i l eve r Ga te Op t ionAn alternative system that can be adopted to Industrial cantilever gates. With concealed rollers, this type of gate is ideal in dusty locations, or areas of snow drift where the running rail could be, at times, partially covered. The undercarriage option is also ideal for applications where there is insuffi cient room to install a running rail.
The gate pivots around a centralised roller assembly eliminating the need for conventional gate extensions. It is also useful for gate installations on sloping sites.
Where site conditions are not suitable for a running rail, cantilever gates are available with an undercarriage option.Undercarriage cantilever gates are available for Industrial (ICLU) models.
Gate Moto rs – Can t i l eve r Ga te sDuty Level Gate Duty Motor Operations Opening Max Leaf Max Leaf Motor Control Code Code Per Day Speed Length Weight Size Type (mm/s) (m) (kg) (w)
Advantage CLA Light MOTSLL <10 200 6 1000
Industrial ICL Light MOTSLL <10 200 6 1000
Mid MOTSLM 10-50 450 8 800 550 Invertor & CB6
Security CLS Mid MOTSLM 10-50 450 8 800 550 Invertor & CB6
High MOTSLH 50+ 630 - 2000 750 Invertor & CB6
High Security CLSH High MOTSLH 50+ 630 - 2000 750 Invertor & CB6
✆ 1 3 0 0 7 8 0 4 5 0✆ 1 3 0 0 7 8 0 4 5 0
Typical bi-opening operationwith pedestrian gate option
Undercarriage option (Industrial models)
3434
P roduc t Range > Gates > Cant i l e v e r > Con f igu ra t ions
Cantilever gates continue to be the popular choice as a safe reliable gate design. They can be installed in a number of confi gurations, using bi-parting operation with options to include central pedestrian or smaller swing access gate.
Cantilever gates can also be installed with an overhead drive option for unrestricted operation in fl ood-prone areas or for alpine regions where drive mechanisms can be affected by compacting snow.
Roads and driveway entrances can be spanned up to 10 metres allowing clearance for central kerbs and road crowns. With less rolling resistance, cantilever gates can achieve faster, open and close speeds than track gates. Speeds can be adjusted (normally 0.6m -1.0m / second) and can be ‘ramped’ up or down at the end of the gate travel.
Heavy duty rollers and receiving rails together with a well-balanced design ensure smooth and effi cient operation of all cantilever gates.
✆ 1 3 0 0 7 8 0 4 5 0✆ 1 3 0 0 7 8 0 4 5 0
Typicalbi-parting operation
Overhead drive option(Suitable for flood areas).
35
Gates 12
Track 18
Cantilever 28
Swing 36
Bi-fold 42
Boom 46
General 58
35
G a t e sP roduc t Range > Gates > Cant i l e v e r > Con f igu ra t ions