Cantera™ Vertical Wall Mix is a pre-packaged light weight overlay system for vertical surfaces. It can be trowel applied and then stamped, textured or sculpted by hand to mimic natural stone construction.

• Vertical stamping mix• Stamp or hand carve• 3/4" to 2" thickness• Can be integrally colored or stained• Light weight, user friendly• Interior or exterior applications• Cost effective alternative to natural stone

• DurableurethanemoldsthatcanbeusedwithButterfield Color® Flat Out® Countertop Mix for accelerated repeat production• Gilpin’s Falls Bridge Plank top replicates the natural look of a wood plank and works with both leg systems

Color and durability are the very essence of Butterfield Color®...

Vertical Stamping Tools

With over 40 years of field experience in architectural and decorative concrete, Butterfield Color® offers a complete

line of decorative concrete color additives, decorative concrete stamping tools, release agents, concrete acid stains, concrete sealers and concrete overlay products that are technically superior to meet the demanding needs of the architectural specifier as well as the concrete finisher. All Butterfield Color® products have been field proven for durability in both northern and southern climates. With multiple U.S. shipping locations strategically positioned Butterfield Color® provides products to the U.S., Canada and World Wide!

625 W Illinois Ave | Aurora, IL 60506 | Phone: 800-282-3388 | Fax: 630-906-1982 | www.butterfieldcolor.com

Cantera™ Vertical Wall Mix Concrete Bench Mold Systems

C

B

A

A

B

C

C

C

220 E. General Robinson St.Pittsburgh, PA 15212412-321-3217 412-321-6108 fax

156 N. Washington RoadApollo, PA 15613724-727-2772724-727-2033 fax

4636 Benedum DriveBridgeport, WV304-592-3217304-592-3591 fax

4589 State Route 422Pulaski, PA 16143724-964-8822724-964-8823 fax

4

Color and durability are the very essence of Butterfield Color... With over 40 years of field experience in architectural and decorative concrete, Butterfield Color offers a complete line of decorative concrete color additives, decorative concrete stamping tools, release agents, concrete acid stains, concrete sealers and concrete overlay products that are technically superior to meet the demanding needs of the architectural specifier as well as the concrete finisher. All Butterfield Color products have been field proven for durability in both northern and southern climates.

Butterfield Color® has built its reputation on quality and reliability. All of our stamping and texturing tools have been designed and precision manufactured to perform to the expectations that our 40 years of field experience provides. Each stamping tool is molded using the actual stone, brick, or wood that it recreates. Our tools are designed to minimize repetition, surface cracking, and blowouts along grout lines, thus pro-ducing realistic and natural appearing installations, reducing the touch-up time, and increasing capabilities.

VERTICAL STAMPING TOOLS

220 E. General Robinson St.Pittsburgh, PA 15212412-321-3217 412-321-6108 fax

156 N. Washington RoadApollo, PA 15613724-727-2772724-727-2033 fax

4636 Benedum DriveBridgeport, WV304-592-3217304-592-3591 fax

4589 State Route 422Pulaski, PA 16143724-964-8822724-964-8823 fax

5

Vertical concrete overlays can provide a new decorative finish to existing walls and other vertical surfaces. Mainly applied to existing concrete substrates, vertical wall mixes can also be applied to drywall, cement board, masonry, and brick. Create the appearance of natural stone, wood, brick, and masonry using vertical stamping tools, vertical texture & joint roller tools, or by hand carving a unique stone design. Vertical overlays are colored and stained using integral concrete color, acid stain and water based concrete stain.

Butterfield Color is pleased to introduce the Cantera™ vertical wall systems. This system consists of Cantera™ Vertical Wall Mix and the Butterfield Color® Vertical Wall Stamping Tools and Texture Rollers. The stamping tools and vertical texture rollers are designed for use with Cantera to create the look of natural stone. Once stamped and colored, the cured material creates a dura-ble, natural looking and weather resistant surface that resembles natural stone.

VERTICAL CONCRETE OVERLAYGIVES A NATURAL STONE APPEARANCE

CANTERA™ VERTICAL WALL MIXA polymer modified, cementitious overlay that is a lightweight and sag resistant material suitable for indoor and outdoor use.A precise blend of graded aggregate, cement and polymer which allows for thin to moderate-ly thick application: 3/4 inch (19 mm) minimum to a maximum of 2 inch (51 mm) in a single application. Multiple applications are possible if a thickness over 2” is desired.Available in 35 pound (15.9 kg) bags, mix one bag with 1.75 - 2.00 gallons (6.6 to 7.5 L) potable water water for coverage of approximately 11 square feet at 3/4 inch (1 m2 at 19 mm) thick.Available in a medium gray blend with a wide range of color options available by adding Uni-Mix® Color Packs prior to mixing. T1000™ Primer and T1000™ Fine Overlay are used to prepare the substrate and create the scratch coat.

T1000™ Primer

T1000™ Fine Overlay Stamping

Tools

Product Data Sheet

220 E. General Robinson St.Pittsburgh, PA 15212412-321-3217 412-321-6108 fax

156 N. Washington RoadApollo, PA 15613724-727-2772724-727-2033 fax

4636 Benedum DriveBridgeport, WV304-592-3217304-592-3591 fax

4589 State Route 422Pulaski, PA 16143724-964-8822724-964-8823 fax

6

PRO PACK™ COUNTERTOP ADMIXTURE

Pre-measured admixture pack designed to combined with most standard concrete bag mixes and water.

One admixture pack combined with either an 80 lb. bag or a 60 lb. bag of standard concrete mix will convert most economical concrete bag mixes into high performance concrete countertop mix.

Increases strength, reduces shrinkage, improves finishing characteristics, accelerates set time and allows decreased water cement ratio.

The mix may be colored with Butterfield Color® Uni-Mix® Integral Color Packs (2 color packs per unit are required), 24 Standard colors are available.

Mixes containing Pro Pack™ Countertop Admixture may be stained by ap-plying Perma-Cast® Sierra Stain™ or Elements™ Transparent Concrete Stain.

Product Data Sheet

220 E. General Robinson St.Pittsburgh, PA 15212412-321-3217 412-321-6108 fax

156 N. Washington RoadApollo, PA 15613724-727-2772724-727-2033 fax

4636 Benedum DriveBridgeport, WV304-592-3217304-592-3591 fax

4589 State Route 422Pulaski, PA 16143724-964-8822724-964-8823 fax

7

FLAT OUT® COUNTERTOP MIX

Designed for quick production and pre-casting of countertops, tabletops, con-crete panels, and other architectural precast shapes and pieces.

A fast setting two component cementitious concrete mix, with pieces able to be de-molded in a little as 3 hours.Polish within 8 hours of pouring.

A glass fiber reinforced, polymer modified, self-consolidating mix with a 28-day compressive strength of approximately 11,000 psi.

Wide range of color options available by adding a Uni-Mix® Color Pack for each bag of countertop mix.

Dry mix is packaged in 55 lb (24.94 kg) bags and the Liquid Polymer is packaged in 5 gallon (18.9L) pails. One pail of polymer yields enough material for approximately 6 bags of countertop mix.

One bag of dry materials mixed with approximately 3.25 quarts (3L) of liquid polymer yields 0.42 cubic feet (11.9L) of cured material or approximately 5 square feet (.46 m²) at 1 inch (25.4 mm) thick.

Product Data Sheet

220 E. General Robinson St.Pittsburgh, PA 15212412-321-3217 412-321-6108 fax

156 N. Washington RoadApollo, PA 15613724-727-2772724-727-2033 fax

4636 Benedum DriveBridgeport, WV304-592-3217304-592-3591 fax

4589 State Route 422Pulaski, PA 16143724-964-8822724-964-8823 fax

8

ELEMENTS™ TRANSPARENT CONCRETE STAIN

Packaged in 32-ounce (1 L) and 4-ounce (118 ml) bottles of concentrated stain. Standard Dilution is 3 parts water to 1 part stain. At diluted strength coverage is approximately 200-400 square feet per gallon, but varies with surface conditions. Formulated to readily permeate a properly prepared concrete surface and create translucent color variations similar to reactive acid stain.

A low odor, water-based, environmentally and user-friendly concrete staining system with low VOC (15-45 g/L depending on color selection).

CHO™ Cleaner required for washing substrate prior to staining with Elements™ Transparent Stain.

Product Data Sheet

T1000™ STAMPABLE OVERLAYPackaged in 55-pound (25 kg) bags. Each bag, when properly mixed with water, provides for approximately 24 SF at 1/4” thick (2.2m² at 6 mm thick).

A polymer modified, cementitious material designed for resurfacing and texturing stable, non-moving concrete floors and hardscapes.

Single application thickness can range from 1/8” (3mm) to a maximum of 1/2” (13mm), depending on thickness desired.

Use with T1000™ Primer to provide enhanced adhesion and workability of the material.

Wide range of Uni-Mix® Color Packs available. Available in Cement Gray and Cement White.

Product Data Sheet