canon a95 en
TRANSCRIPT
-
8/4/2019 Canon a95 En
1/163
ENGLISH
Camera User Guide
Please read the Read This Firstsection (p. 4).
Please also see the Canon Digital Camera Software Starter Guide Diskand the Direct Print User Guid
DIGITALCAMERA
CameraUserGuide
CANON INC.30-2 Shimomaruko 3-chome, Ohta-ku,Tokyo 146-8501, Japan
Europe, Africa & Middle-East
CANON Europa N.V.PO Box 2262, 1180 EG Amstelveen, The Netherlands
CANON (UK) LTDFor technical support, please contact the Canon Help Desk:P.O. Box 431, Wallington, Surrey, SM6 0XU, UKTel: (08705) 143723 Fax: (08705) 143340http://www.canon.co.uk/Support/index.asp
CANON COMMUNICATION & IMAGEFRANCE S.A.102 Avenue du Gnral de Gaulle,
92257 LA GARENNE COLOMBES CEDEX, FranceTl : Hot line 08 25 00 29 23http://www.cci.canon.fr
CANON DEUTSCHLAND GmbHPostfach 100401, 47704 Krefeld, GermanyCustomer Hotline: 0180/5006022 (0,12 / Min.)http://www.canon.de
CANON ITALIA S.P.A.Via Milano 8, I-20097 San Donato Milanese (MI), ItalyTel: 02/8248.1 Fax: 02/8248.4604Pronto Canon: 02/8249.2000E-mail: [email protected] http://www.canon.it
CANON ESPAA S.A.C/Joaquin Costa, 41 28002 Madrid, SpainTel. Atencin al Cliente: 901.301.301Help Desk: 906.301.255http://www.canon.es
CANON BELGIUM N.V. / S.A.Bessenveldstraat 7, B 1831 Diegem, BelgiumTe l. : ( 02 ) 7 22 .04 .11 F ax : (0 2) 7 21. 32 .7 4Helpdesk : 0900-10627http://www.canon.be
CANON LUXEMBOURG S.A.Rue des Joncs 21, L-1818 Howald, LuxembourgTel. : (0352) 48 47 961 Fax: (0352) 48 47 96232Helpdesk : 900-74100http://www.canon.lu
CANON NEDERLAND N.V.Neptunusstraat 1, 2132 JA Hoofddorp, The NetherlandsTe l. : 0 23 5 67 0 1 23 F ax : 0 23 5 67 0 1 24Helpdesk: 023 5 681 681http://www.canon.nl
CANON DANMARK A/SKnud Hjgaards Vej 1, DK-2860 Sborg, DanmarkPhone: +45 44 88 26 66http://www.canon.dk
CANON NORGE ASHallagerbakken 110, Postboks 33, Holmlia, 1201 Oslo,NorwayTlf: 22 62 93 21 Faks: 22 62 06 15E-mail: [email protected]://www.canon.no
Finland
CANON OYKuluttajatuotteetHuopalahdentie 24, PL1,00351 HelsinkiHelpDesk 020 366 466 (pvm)Internet: www.canon.fi
CANON SVENSKA ABGustav III:s Boulevard 26, S-169 88 Solna, SwedenH el pd es k: 0 8- 74 4 8 62 0 Fa x 0 8- 74 4 8 52 7http://www.canon.se
CANON (SCHWEIZ) AGIndustriestrasse 12, 8305 Dietlikon, SwitzerlandConsumer Imaging GroupTel. 01-835-61 61Hotline 0900 57 55 20 (CHF 2.13/min)http://www.canon.ch
Austria
CANON GES.M.B.H.Zetschegasse 11, A - 1230 Wien, AustriaHelpdesk Tel.: 01 66 146 412Fax: 01 66 146 413
http://www.canon.at
Portugal
SEQUE SOC. NAC. EQUIP., S.A.Pr. Alegria, 58 2C, 1269-149 LisboaTelef: (+351) 21 324 28 30 Fax: (+351) 21 347 27 51E -m ai l: i n fo@s eque .p t h tt p: // ww w. seque. pt
Eastern Europe
CANON CEE GMBHOberlaaerstr 233, A-1100 Wien, AustriaTe l. : + 43 1 680 88 -0 F ax : + 43 1 680 88 -422
CIS
CANON NORTH-EAST OYHuopalahdentie 24, 00350 Helsinki, FinlandTel.: +358 10 544 00 Fax: +358 10 544 10http://www.canon.ru
CEL-SE5ZA210 2004 CANON INC. Printed in the EU
-
8/4/2019 Canon a95 En
2/163
The default for the settings changed by the menu and button operations can be restored all at once except for[Date/Time], [Language] and [Video System] (p. 75).(1) The default setting of the flash for the [Foliage] and [Fireworks] options is [Off].
The following functions cannot be set in the [Fireworks] mode.- The [Auto] and [On] setting of the flash- Red-eye reduction function- AF-assist beam- AF frame selection- Macro mode- AF lock- Manual focusThe following functions cannot be set in the [Kids&Pets] mode.- Macro mode- AF frame selection
(2) When using the digital zoom, AF frame is set to [Center].(3) Cannot be adjusted when the AF frame is set to [AiAF].(4) Cannot be adjusted when the photo effect is set to [Sepia] or [B/W].(5) The white balance is set to [AUTO].(6) Settings automatically set by the camera.(7) ISO [AUTO] cannot be selected.
Function (1) ReferePage
LightMeteringSystem
Spot Metering(3)
83Center
AF Point
White Balance (4) (5) (6) 86Photo Effect (6) 90ISO Speed (6) (6) (6) (6) (6) (6) (6) (6) (6) (7) 89
Auto RotateON * * * * * * * * * * * *
95OFF
1
Disclaimer While every effort has been made to ensure that
the information contained in this guide isaccurate and complete, no liability can beaccepted for any errors or omissions.
Canon reserves the right to change thespecifications of the hardware and softwaredescribed herein at any time without priornotice.
No part of this guide may be reproduced,transmitted, transcribed, stored in a retrievalsystem, or translated into any language in anyform, by any means, without the prior writtenpermission of Canon.
Canon makes no warranties for damages
resulting from corrupted or lost data due to amistaken operation or malfunction of thecamera, the software, the CompactFlashTM
cards (CF cards), personal computers,peripheral devices, or use of non-CanonCF cards.
Trademark Acknowledgements Canon and PowerShot are trademarks of
Canon Inc.. CompactFlash is a trademark of SanDisk
Corporation. Macintosh, Mac OS and QuickTime are
trademarks of Apple Computer, Inc, registered inthe United States and other countries.
Microsoft, Windows, and Windows NT are eitherregistered trademarks or trademarks of MicrosoftCorporation in the United States and/or othercountries.
Other names and products not mentioned abovemay be registered trademarks or trademarks oftheir respective companies.
Use of genuine Canon accessories isrecommended.
This product is designed to achieve excellentperformance when used with genuine Canonaccessories. Canon shall not be liable for anydamage to this product and/or accidents such asfire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack). Please note thatthis warranty does not apply to repairs arising outof the malfunction of non-genuine Canonaccessories, although you may request suchrepairs on a chargeable basis.
-
8/4/2019 Canon a95 En
3/163
1
Flowchart and Reference Guides
This Guide
Shooting with the Camera
Installing the Software
This Guide
Connecting the Camera to a Computer
Canon Digital Camera SoftwareStarter Guide Disk
Direct Print User Guide
Printer User Guide
Using the Printer and Printing
Downloading Images to a Computer
This Guide
Canon Digital Camera SoftwareStarter Guide Disk
Symbols Used
Icons under title bars show the operations mode.As in the example below, the mode dial should be
set to , , , , , , , , , ,or .
Using the Flash
Mode Dial
This mark denotes issues that may affectthe camera's operation.
This mark denotes additional topics thatcomplement the basic operatingprocedures.
-
8/4/2019 Canon a95 En
4/163
2
Table of Contents
Items marked with are lists or charts thatsummarize camera functions or procedures.
Please Read ..................................................... 4
Safety Precautions ........................................... 6Preventing Malfunctions .................................11
Installing the Batteries .................................... 15Installing a CF Card........................................ 18Setting the Date/Time..................................... 21Setting the Language .....................................22Opening the LCD Monitor...............................24
Using the LCD Monitor ................................... 26
Turning the Power On/Off .............................. 31Switching between Shooting and Playback.... 32
Auto Mode.............................................. 34Reviewing an Image Right after Shooting ...... 37Using the Mode Dial (Image Zone) ................ 39
Portrait..................................................39
Landscape............................................ 39
Read This First ..................................................4
Components Guide .........................................12
Preparing the Camera.....................................15
Basic Functions...............................................31
Shooting The Basics....................................34
Night Scene ......................................... 39Fast Shutter ......................................... 39
Slow Shutter......................................... 39
Changing the Resolution and Compression... 41
Using the Flash ......................................... 43Macro Mode .............................................. 45Self-timer........................................................ 46Digital Zoom ................................................... 47Continuous Shooting...................................... 48
Shooting Panoramic Images (Stitch Assist).... 49Special Scene Mode ............................... 51
Postcard Print Mode....................................... 54Movie Mode............................................. 56
Displaying Images Individually (Single Image Playback).. 58Magnifying Images................................... 58Viewing Images in Sets of Nine (Index Playback).....59
Jumping Between Images.............................. 60Viewing/Editing Movies .................................. 60
Erasing Images Individually ....................... 64Erasing All Images ......................................... 64
Selecting Menus and Settings........................ 66
Playback The Basics ................................... 58
Erasing.............................................................64
Shooting Advanced Functions ...................66
-
8/4/2019 Canon a95 En
5/163
3
Table of Contents
Menu Settings and Default Settings...............69
Resetting the Settings to Default .................... 75Using the Mode Dial (Creative Zone) .............76
Program AE........................................... 77
Setting the Shutter Speed ..................... 77Setting the Aperture ..............................79
Manually Setting the Shutter Speed and Aperture .....80Select the AF Frame ...................................... 81
Setting an AF Frame Manually .............82
Switching between Light Metering Modes...... 83Adjusting the Exposure ..................................85Adjusting the Tone (White Balance) ...............86Changing the ISO Speed ............................... 89Changing the Photo Effect ............................. 90
Adjusting the Flash Output .............................91Shooting Problem Subjects for the Autofocus ........92
Saving Custom Settings .............................94Setting the Auto Rotate Function ................... 95
Rotating Images in the Display....................... 97Attaching Sound Memos to Image ................. 98Auto Play ........................................................99Protecting Images ........................................ 100
Playback Advanced Functions ...................97
About Printing............................................... 101DPOF Print Settings..................................... 103Image Transmission Settings (DPOF Transfer Order) .. 107
Downloading Images to a Computer............ 108Computer System Requirements ............. 109
Viewing Images on a TV Set........................ 117Resetting the File Number ........................... 118Customizing the Camera (My Camera Settings) ..120Registering My Camera Settings ................. 121
Using the Power Kits (Sold Separately) ....... 132Using the Lenses (Sold Separately)............. 135Camera Care and Maintenance................... 139
Battery Performance .................................... 144CF Cards and Estimated Capacities (Recordable Images)..145
Functions Available in Each Shooting Mode ....159
Various Functions.........................................101
List of Messages ........................................... 124
Troubleshooting............................................126
Appendix........................................................132
Specifications................................................140
Photo Tips and Information ......................... 150
INDEX ............................................................. 152
-
8/4/2019 Canon a95 En
6/163
4
Read This First
Please Read
Test ShotsBefore you try to photograph important subjects, we highly recommend that you shoot several trial images
to confirm that the camera is operating and being operated correctly. Please note that Canon Inc., itssubsidiaries and affiliates, and its distributors are not liable for any consequential damages arising fromany malfunction of a camera or accessory, including CompactFlashTM cards, that results in the failure ofan image to be recorded or to be recorded in a format that is machine readable.
Warning Against Copyright InfringementPlease note that Canon digital cameras are intended for personal use and should never be used in amanner that infringes upon or contravenes international or domestic copyright laws and regulations.Please be advised that in certain cases the copying of images from performances, exhibitions, or
commercial properties by means of a camera or other device may contravene copyright or other legalrights even if the image was shot for personal use.
Warranty LimitationsFor information on your camera's warranty, please refer to the Canon European Warranty System (EWS)Booklet supplied with your camera.
For Canon Customer Support contacts, please see rear of this booklet or the European WarrantySystem (EWS) Booklet.
-
8/4/2019 Canon a95 En
7/163
5
Read This First
If your camera is used for prolonged periods, the camera body may become warm. Please be aware of thisand take care when operating the camera for an extended period.
The LCD monitor is produced with extremely high-precision manufacturing techniques. More than 99.99%of the pixels operate to specification. Less than 0.01% of the pixels may occasionally misfire or appear asred or black dots.This has no effect on the recorded image and does not constitute a malfunction.
Video FormatPlease set the camera's video signal format to the one used in your region before using it with a TVmonitor (p. 118).
Language SettingPlease see page 22 to change the language setting.
Charging the Date/Time Battery The camera has a built-in rechargeable lithium battery that maintains the date, time and other camera
settings. This battery recharges when the main batteries are inserted into the camera. When you firstpurchase the camera, place fully charged batteries in it or use the AC adapter kit (sold separately) for atleast 4 hours to charge the date/time battery. It will charge even when the camera power is set to Off.
If the Date/Time menu appears when the camera power is turned on, it means that the date/time batterycharge is depleted. Recharge it as described above.
Camera Body Temperature
About the LCD Monitor
-
8/4/2019 Canon a95 En
8/163
6
Read This First
Safety Precautions
Before using the camera, please ensure that you have read and understood the safety precautionsdescribed below. Always ensure that the camera is operated correctly.
The safety precautions noted on the following pages are intended to instruct you in the safe and correct
operation of the camera and its accessories to prevent injuries or damage to yourself, other persons andequipment.
In the next few pages, the term equipment refers primarily to the camera and its power supplyaccessories (see the System Map for power supply accessory details).
WARNINGS
Do not aim the camera directly into the sun or at other intense light sources which coulddamage your eyesight.
Do not trigger the flash in close proximity to human or animal eyes. Exposure to the intense lightproduced by the flash may damage eyesight. In particular, remain at least one meter (39 inches) awayfrom infants when using the flash.
Store this equipment out of the reach of children and infants. Accidental damage to the camera orbatteries by a child could result in serious injury. In addition, placement of the strap around a child'sneck could result in asphyxiation.
Do not attempt to disassemble or alter any part of the equipment that is not expressly describedin this guide. Disassembly or alteration may result in high-voltage electrical shock. Internalinspections, alterations and repairs should be conducted by qualified service personnel authorized by
your camera distributor or a Canon Customer Support Help Desk. To avoid the risk of high-voltage electrical shock, do not touch the flash portion of the camera if
it has been damaged. Similarly, never touch internal portions of the equipment that become exposedas a result of damage. There is a risk of high-voltage electrical shock. Please take the first opportunityto consult your camera distributor or a Canon Customer Support Help Desk.
-
8/4/2019 Canon a95 En
9/163
7
Read This First
Stop operating the equipment immediately if it emits smoke or noxious fumes. Failure to do somay result in fire or electrical shock. Immediately turn the cameras power off, remove the camerabatteries or unplug the power cord from the power outlet. Confirm that smoke or fume emissions haveceased. Please consult your camera distributor or the closest Canon Customer Support Help Desk.
Stop operating the equipment if it is dropped or the casing is damaged. Failure to do so mayresult in fire or electrical shock. Immediately turn the cameras power off, remove the camera batteriesor unplug the power cord from the power outlet. Please consult your camera distributor or the closestCanon Customer Support Help Desk.
Do not allow the equipment to come into contact with, or become immersed in, water or otherliquids. Do not allow liquids to enter the interior. The camera has not been waterproofed. If the exteriorcomes into contact with liquids or salt air, wipe it dry with a soft, absorbent cloth. In the event that wateror other foreign substances enter the interior, immediately turn the camera's power off and remove thecamera batteries or unplug the power cord from the power outlet. Continued use of the equipment mayresult in fire or electrical shock. Please consult your camera distributor or the closest Canon CustomerSupport Help Desk.
Do not use substances containing alcohol, benzene, thinners or other flammable substances toclean or maintain the equipment. The use of these substances may lead to fire.
Remove the power cord on a regular periodic basis and wipe away the dust and dirt that collectson the plug, the exterior of the power outlet and the surrounding area. In dusty, humid or greasyenvironments, the dust that collects around the plug over long periods of time may become saturatedwith humidity and short-circuit, leading to fire.
Do not cut, damage, alter or place heavy items on the power adapter cord. Any of these actions
may cause an electrical short circuit, which may lead to fire or electrical shock. Do not handle the power cord if your hands are wet. Handling it with wet hands may lead to
electrical shock. When unplugging the cord, ensure that you hold the solid portion of the plug. Pullingon the flexible portion of the cord may damage or expose the wire and insulation, creating the potentialfor fires or electrical shocks.
-
8/4/2019 Canon a95 En
10/163
8
Read This First
Use only the recommended power accessories. Use of power sources not expressly recommendedfor this equipment may lead to overheating, distortion of the equipment, fire, electrical shock or otherhazards.
Do not place the batteries near a heat source or expose them to direct flame or heat. Neither
should you immerse them in water. Such exposure may damage the batteries and lead to theleakage of corrosive liquids, fire, electrical shock, explosion or serious injury. Do not attempt to disassemble, alter or apply heat to the batteries. There is serious risk of injury
due to an explosion. Immediately flush with water any area of the body, including the eyes and mouth,skin, or clothing that comes into contact with the inner contents of a battery.
Avoid dropping or subjecting the batteries to severe impacts that could damage the casings. Itcould lead to leakage and injury.
Do not short-circuit the battery terminals with metallic objects, such as key holders. It could leadto overheating, burns and other injuries.
Before you discard a battery, cover the terminals with tape or other insulators to prevent directcontact with other objects. Contact with the metallic components of other materials in wastecontainers may lead to fire or explosions. Discard the batteries in specialized waste facilities if availablein your area.
Use only recommended batteries and accessories. Use of batteries not expressly recommended forthis equipment may cause explosions or leaks, resulting in fire, injury and damage to the surroundings.
If using AA-size NiMH batteries, use only Canon AA-size NiMH batteries and the chargerrecommended for use with these batteries. Use of another charger may cause batteries to overheator deform, posing risk of fire or electric shock.
Disconnect the battery charger or compact power adapter from both the camera and poweroutlet after recharging and when the camera is not in use to avoid fires and other hazards.Continuous use over a long period may cause a unit to overheat and distort, resulting in fire.
-
8/4/2019 Canon a95 En
11/163
9
Read This First
CAUTIONS
The camera terminal of the compact power adapter is designed for exclusive use with yourcamera. Do not use it with other products or batteries. There is a risk of fire and other hazards.
Exercise due caution when screwing on the separately sold wide converter, tele-converter,close-up lens and conversion lens adapter. If they loosen, fall off and shatter, the glass shards may
cause an injury.
Caution about magnetic fieldsKeep objects that are sensitive to magnetic fields (such as credit cards) away from the speaker of thecamera (p. 12). Such items may lose data or stop working.
Avoid using, placing or storing the equipment in places subject to strong sunlight or hightemperatures, such as the dashboard or trunk (boot) of a car. Exposure to intense sunlight andheat may cause the batteries to leak, overheat or explode, resulting in fire, burns or other injuries. Hightemperatures may also cause deformation of the casing. Ensure that there is good ventilation whenusing the battery charger to charge the batteries or power the camera.
Do not store the equipment in humid or dusty areas. Storage in such areas could lead to fire,electrical shock or other damage.
Be careful not to bang the camera or subject it to strong impacts or shocks that could lead toinjury or damage the equipment when wearing or holding it by the strap.
Be careful not to cover the flash with your fingers or clothing when shooting. The flash may bedamaged and emit smoke or noise. In addition, do not touch the surface of the flash after taking severalpictures in rapid succession. Either action could result in burns.
Do not operate the flash with dirt, dust or other items stuck to its lens. The resulting heat build-upcould damage the flash.
-
8/4/2019 Canon a95 En
12/163
10
Read This First
Ensure that the battery charger or compact power adapter is plugged into a power outlet of thespecified rating, not over the specified rating. The plug of the battery charger varies according toregion.
Do not use the battery charger or compact power adapter if the cable or plug is damaged, or if
the plug is not fully inserted into the power outlet. Do not allow metal objects (such as pins or keys) or dirt to contact the charger terminals
or plug. If your camera is used for prolonged periods, the camera body may become warm. Please take
care when operating the camera for an extended period as your hands may experience a burningsensation.
-
8/4/2019 Canon a95 En
13/163
11
Read This First
Preventing Malfunctions
Avoid Strong Magnetic FieldsNever place the camera in close proximity to electric motors or other equipment generating strong
electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions or corrupt image data.
Avoid Condensation Related ProblemsMoving the equipment rapidly between hot and cold temperatures may cause condensation (waterdroplets) to form on its external and internal surfaces. You can avoid this by placing the equipment in anairtight, resealable plastic bag and letting it adjust to temperature changes slowly before removing it fromthe bag.
If Condensation Forms Inside the CameraStop using the camera immediately if you detect condensation.Continued use may damage the equipment. Remove the CF card, batteries or other power supplyaccessory from the camera and wait until the moisture evaporates completely before resuming use.
Extended StorageWhen not using the camera for extended periods of time, remove the batteries from the camera or batterycharger and store the equipment in a safe place. Storing the camera for extended periods with batteriesinstalled may cause battery leaks, which can damage the camera.
However, the date, time and other camera settings may reset to default settings if the batteries have beenremoved for more than three weeks.
-
8/4/2019 Canon a95 En
14/163
12
Components Guide
Shutter Button(p. 34)
Speaker
Shooting Mode Dial (p. 39)
A/V (Audio/Video) OutTerminal (p. 117)
DIGITAL Terminal (p. 111)Terminal CoverLens Ring
Microphone
Zoom Lever(p. 34, 47, 58, 59, 60)
Ring Release Button
ON/OFF Button (p. 31)
Power Lamp (p. 14)
Viewfinder Window (p. 36)Flash (p. 43)
AF-assist Beam (p. 36)
Red-eye Reduction Lamp (p. 44)
Self-timer Lamp (p. 46)
The following cables are used to connect the camera to a computer or printer.Computer: Interface Cable IFC-400PCU (supplied with the camera)Direct Print Compatible Printers (Sold Separately)
CP Printers: Interface Cable IFC-400PCU (supplied with the camera) or the Direct Interface CableDIF-100 (supplied with the CP-100/CP-10)
Bubble Jet Printers:
- Bubble Jet DirectCompatible Printers: Please refer to your Bubble Jet printer user guide.- PictBridge Compliant Printers: Interface Cable IFC-400PCU (supplied with the camera)
PictBridge Compliant Non-Canon Printers: Interface Cable IFC-400PCU (supplied with the camera)Please refer to the System Map or the Direct Print User Guide supplied with the camera for directprint compatible printer information.
-
8/4/2019 Canon a95 En
15/163
13
Components Guide
PreparingtheCamera,BasicFunctions
LCD Monitor(p. 26, 28)
Indicators (p. 14)
MENU Button (p. 67)
Mode Switch (p. 32)
Viewfinder
Strap Mount
CF Card Slot Cover (p. 18)
(Macro)/ MF(Manual Focus)/Down Button (p. 45, 66, 93)
SET /(AF Frame Selector)Button (p. 81)
FUNC. (Function)/ (SingleImage Erase) Button (p. 64, 66)
Battery Cover Lock (p. 15)Tripod SocketDISP. (Display) Button (p. 26, 28)
(Print/Share) Button (p. 101, 113)
DC INTerminal (p. 134)
(Flash) / Up Button (p. 43, 66)
Left Button (p. 66)Right Button (p. 66)
The following operations are accessible through one easy press of the (Print/Share) button. Printing: See the Direct Print User Guide (separate from this guide)
Downloading images (Windows only): See page 108 of this guide and the Canon Digital Camera Software Starter Guide Disk(separate from this guide)Blue: Ready to print/Ready to transfer imagesBlinking Blue: Printing/Transferring (Depending on the direct transfer method, the indicator may not blink (p. 113))
* When carrying the camera by the strap, be careful not to swing the camera or catch it on other items.
Attaching thewrist strap*
Battery Cover (p. 15)
-
8/4/2019 Canon a95 En
16/163
14
Components Guide
Shooting Mode Dial
Use the shooting modedial to switch betweenthe Shooting modes.
: Auto (p. 34)The cameraautomatically selectssettings.
Image ZoneThe camera automatically selects settingsaccording to the image composition type.
: Portrait (p. 39) : Landscape (p. 39): Night Scene (p. 39) : Fast Shutter (p. 39): Slow Shutter(p. 39): Special Scene (p. 39, 51): Stitch Assist (p. 39, 49) : Movie (p. 56)
Creative ZoneThe user selects exposure, aperture or othersettings to achieve special effects.
: Program AE (p. 77): Shutter-speed priority AE (p. 77)
: Aperture-priority AE (p. 79): Manual Exposure (p. 80): Custom (p. 94)
Creative Zone
Image Zone
Auto
Indicators
The indicators light or blink when the ON/OFFbutton or the shutter button is pressed.
Upper IndicatorGreen: Ready to record/Ready to communicate(during a computer connection)
Blinking Green: Recording to CF card/ReadingCF card/Erasing from CF card/Transmittingdata (during a computer connection)/Lowbattery
Orange: Ready to shoot (flash on)Blinking Orange: Ready to shoot (camera shake
warning)/Flash is charging
Lower IndicatorYellow: Macro mode/Manual Focus mode/AF LockBlinking Yellow: Focusing difficulty (although you
can press the shutter button, you arerecommended to shoot using focus lock(p. 92))
Power LampGreen: Power is onBlinking Green: Low battery
-
8/4/2019 Canon a95 En
17/163
15
PreparingtheCamera,BasicFunctions
Preparing the Camera
Installing the Batteries
Insert four AA-size alkaline batteries(supplied with the camera) or separately soldnickel metal hydride (NiMH) batteries.
1 Be sure that the camera power is off.
2Slide the batterycover lock in thedirection of thearrow, and openthe cover.
3 Insert the batteries as shown.
4 Close the battery cover.
Positive end +
Negative end (-) Proper Battery Handling
Use AA-size alkaline or Canon AA-size NiMHbatteries (sold separately) only. For informationon handling the AA-size rechargeable NiMHbatteries, see Using Rechargeable Batteries(p. 132).
When the upper indicator blinks green, donot turn off the power or open the batterycover. The camera is writing, reading,erasing or transmitting an image to or from
the CF card.
The use of the separately sold ACAdapter Kit ACK600 is recommended topower the camera during long usagesessions (p. 134).
The separately sold battery charger kitlets you use rechargeable NiMHbatteries to power the camera (p. 132).
See Battery Performance (p. 144). For information about the Battery and
Charger Kit and AA-size rechargeableNiMH batteries, see the System Map(separate from this guide).
-
8/4/2019 Canon a95 En
18/163
16
Preparing the Camera
Since the performance of alkaline batteriesmay differ according to brand, the operatingtime of the batteries you purchase may not beas long as the batteries that came with thecamera.
Camera operating time may shorten at lowtemperatures when alkaline batteries are used.Also due to their specifications, alkaline batteriesmay expire faster than NiMH batteries. If you areusing the camera in cold areas or for a long time,we recommend using Canon AA-size NiMHBattery Kit (a four-piece set).
While it is possible to use AA-size nickel-cadmium batteries, performance is unreliableand their use is not recommended.
Never mix unused and partially usedbatteries. Always load four fresh (or fullyrecharged) batteries at the same time. Thepartially used batteries may leak.
Be careful to load the batteries with theirpositive (+) and negative (-) ends in the rightdirection.
Never mix batteries of different types or fromdifferent manufacturers. All four batteriesshould be identical.
Before inserting the batteries, wipe the batteryterminals well with a dry cloth. Oil from ones skinor other dirt may cause a considerable reductionin the number of recordable images or reducedusage time.
Battery performance deteriorates at lowtemperatures (especially with alkaline batteries).If you are using the camera in cold areas andbatteries are running down faster than theyshould, you may be able to restore performance
by placing batteries in an inner pocket to warmthem up prior to use. But be careful that you dontput the batteries into a pocket together with ametal key chain or other metallic objects, asthese objects may cause batteries to short-circuit.
If you do not plan to use the camera for a longtime, remove the batteries from the camera andstore them in a safe place. Batteries may leakand damage the camera if left installed during
prolonged periods of non-use. However, thedate, time and other camera settings may resetto default settings if the batteries have beenremoved for more than three weeks.
-
8/4/2019 Canon a95 En
19/163
17
Preparing the Camera
PreparingtheCamera,BasicFunctions
WARNING
Never use damaged batteries or batterieswhose outer seal is completely or partiallymissing or peeled off, as there is risk that suchbatteries may leak, overheat, or burst. Alwayscheck the seals on store-bought batteriesbefore loading them, as some batteries maycome with defective seals. Do not use batterieswith defective seals.
Never use batteries that look like this.
Batteries with all or part of the seal(electrical insulation sheath) peeled
off.
The positive electrode (plus terminal)is flat.
The negative terminal is correctlyformed (protruding from the metalbase), but the seal does not extend
up over the edge of the metal base.
Battery Status Indications
The LCD monitor displays an icon or message tolet you know when batteries are low or depleted.
Power lampblinks green
Batteries are beginning to run low.Replace or recharge the batteries ifyou wish to continue using thecamera. If the LCD monitor is off,this icon will appear when youpress any of the following buttons:DISP., or / MF button.
Change thebatteries
Batteries are fully depleted and thecamera can no longer operate. Youshould replace the batteriesimmediately.
-
8/4/2019 Canon a95 En
20/163
18
Preparing the Camera
Installing a CF Card
1 Be sure that the camera is turnedoff.
2Slide the CF cardslot cover in thedirection of thearrow, and open it.
3 Insert the CF card
with the labelfacing up. Push the card in until the
CF card eject button fullyextends.
To remove the CF card,
press the CF card ejectbutton and pull the cardout.
CF card ejectbutton Card label
Mark
4 Close the CF card slot coversecurely.
When the upper indicator blinks green,
the camera is writing, reading, erasing ortransmitting an image to or from the CFcard. Do not perform the following orimage data may be lost or corrupted:- Subject the camera body to vibration
or shocks.- Turn the cameras power off, or open
the CF card slot cover. Please note that CF cards formatted
with other manufacturers cameras or acomputer, or formatted or edited withapplication programs, may slow downwriting to the CF card or may notoperate correctly in the camera.
You are recommended to use CF cardsthat have been formatted in your camera(see Formatting a CF Card(p. 19)). Thecard supplied with the camera may beused without further formatting.
See CF Cards and Estimated Capacities(Recordable Images) (p. 145).
-
8/4/2019 Canon a95 En
21/163
19
Preparing the Camera
Pr
eparingtheCamera,B
asicFunctions
About CF Cards
CF cards are high-precision electronic devices.Do not bend them, apply force to them, orsubject them to shocks or vibration.
Do not attempt to disassemble or alter a CF card. Moving a CF card rapidly between temperature
extremes will cause condensation to form in thecard and lead to a malfunction. To avoidcondensation, place the CF card in a sealedplastic bag before moving it into a differenttemperature zone and allow it to adjust slowly tothe new temperature. If condensation forms onthe CF card, store it at room temperature untilthe water droplets have evaporated naturally.
Place the CF card in the supplied case forstorage.
Do not use or store CF cards in the followingtypes of location. Locations subject to dust or sand Locations subject to high humidity and high
temperatures
Formatting a CF Card
You should always format a new CF card or onefrom which you wish to erase all images and otherdata.
1 Turn the power on (p. 31).
2Open the LCDmonitor (p. 24)and press theMENU button.Select the [ (Setup)] menu usingthe left or rightbutton.
3 Select (Format)using the up ordown button andpress the SETbutton.
Please note that formatting a CF carderases all data, including protected imagesand other file types. Please check thecontents of the CF card before formatting it.
-
8/4/2019 Canon a95 En
22/163
20
Preparing the Camera
4 Select [OK] usingthe left or rightbutton and pressthe SET button.
To cancel formattinginstead, select [Cancel]and press the SETbutton.
The capacity of the CF card displayed afterformatting will be less than the rated capacityof the CF card. This is not a malfunction ofthe CF card or camera.
5Press the MENU button.
If the camera does not work properly,the inserted CF card may bemalfunctioning. Reformatting the CFcard may solve the problem.
When a non-Canon brand CF card ismalfunctioning, reformatting it may solvethe problem.
CF cards formatted in another camera,computer or peripheral device may notoperate correctly. When that happens,reformat the CF card with this camera.If formatting in the camera does notwork properly, turn the camera off andreinsert the CF card. Then turn the
camera back on and format again.
-
8/4/2019 Canon a95 En
23/163
21
Preparing the Camera
Pr
eparingtheCamera,B
asicFunctions
Setting the Date/Time
The Set Date/Time menu will appear the firsttime the camera power is turned on orwhenever the built-in rechargeable lithiumbattery charge is low, start from Step 4.
1 Turn the power on (p. 31).
2Press the MENUbutton and selectthe [ (Set up)]menu using the
left or right button.
3 Press the up ordown button toselect (Date/Time), and thenpress the SETbutton.
4 Set the date andtime.
Press the left or rightbutton to select the itemyou wish to set.
Press the up or downbutton to change itsvalue.
The date can be set up to the year 2030.
5Press the SET button.
6 Press the MENU button.
The date, time and other camerasettings may reset to the default settingsif the batteries have been removed formore than three weeks. If this happens,reset these settings.
For embedding the date on the imagedata, refer to page 55.
To set the camera so that the date andtime will not appear on the image when it
is being shot but only when it is printed,see eitherSetting the Print Style (p. 105)or the Direct Print User Guide suppliedwith the Camera.
-
8/4/2019 Canon a95 En
24/163
22
Preparing the Camera
Charging the date/time battery The camera has a built-in rechargeable
lithium battery for saving settings suchas the date and time. This battery is
recharged by the AA-size batteries whileit is in the camera. Right afterpurchasing the camera, leave fullycharged batteries in the camera, or plugin the AC Adapter Kit ACK600 (soldseparately), for about 4 hours to chargethe date/time battery. It will charge evenwhen the camera power is turned off.
If the Date/Time menu appears whenthe camera power is turned on, the date/
time battery charge is low. Use theabove method to recharge it.
Setting the Language
Use this feature to select the language for theLCD monitor display.
1 Turn the power on (p. 31).2Press the MENU
button and selectthe [ (Set up)]menu using theleft or right button.
3 Select(Language) usingthe up or downbutton and press
the SET button.
-
8/4/2019 Canon a95 En
25/163
23
Preparing the Camera
Pr
eparingtheCamera,B
asicFunctions
4 Select a languageusing the up,down, left or rightbutton and press
the SET button. The setting menu will reappear without
changing the language setting if you pressthe MENU button instead of the SET button.
5Press the MENU button.
Shortcut OperationThe Language menu can also be displayedin Playback mode by holding down theSET button and pressing the MENUbutton. (This function cannot be used whilea movie clip is played back, or when aseparately sold printer is connected to thecamera.)
-
8/4/2019 Canon a95 En
26/163
24
Preparing the Camera
Opening the LCD Monitor
The LCD monitor can be used to check animage during shooting, to play back recordedimages or to adjust menu settings.
It can be opened to the following range ofpositions.
Opened right to left 180 degrees.
Tilted forward 180 degrees toward the lens orbackward 90 degrees.
The LCD monitor will automatically turn off when itclicks shut against the camera body. Forprotection, always close the LCD monitor after use.
The LCD monitor can also be positioned as below.
1Open the LCD monitor left 180degrees and tilt it 180 degreestoward the lens.
In this position, icons and messages do notappear on the LCD monitor.
-
8/4/2019 Canon a95 En
27/163
25
Preparing the Camera
Pr
eparingtheCamera,B
asicFunctions
The image shown on the LCD monitor isautomatically flipped and reversed so that itappears correctly from in front of the lens. (Thisreverse display function can be turned off.(p. 70))
2Fold the LCD monitor backagainst the camera body.
Fold it until it clicks into place against the camerabody. If it is not fully closed, the image will appearreversed and icons and messages will notdisplay.
Icons and messages will appear and images willshow properly (not reversed) when the LCDmonitor is folded against the camera until it clicks.
The image in the LCD monitor may darkenwhen the monitor is used under sunlight orother strong lighting.This is not a defect.
-
8/4/2019 Canon a95 En
28/163
26
Preparing the Camera
Using the LCD Monitor
Pressing the DISP. button switches the LCD monitor display mode.
Shooting Mode
The AF frame changes according to its setting (LCD monitor On).
AF Frame set to [AiAF] (p. 81) AF Frame set to [Center] or [FlexiZone] (p. 81)
Green: Focusing complete (focused AF frame) Green: Focusing complete
Does not appear: Focusing difficulty Yellow: Focusing difficulty
Standard(No Information)
Detailed(Information View)
DISP. ButtonDISP. Button
Off
Shutter Speed
Aperture Value
AF Frame
Spot AEPoint Frame
Still images: Shots Remaining Movies (seconds):
- Remaining Movie Time- Elapsed Time
DISP. Button
-
8/4/2019 Canon a95 En
29/163
27
Preparing the Camera
Pr
eparingtheCamera,B
asicFunctions
Icons Displayed in Shooting Mode
*1:The icons of all the SCN mode options appear (p. 51).*2:Zoom powers reflect the combined optical and digital
zoom effects. These figures appear when the digitalzoom is activated.
Shooting Mode p. 39, 76
Exposure Compensation p. 85
White Balance p. 86Drive Mode p. 46, 48
ISO Speed p. 89
Photo Effect p. 90
Light Metering Mode p. 83
Compression p. 41
ResolutionPostcard Print
p. 41, 54
Flash p. 43Red-eye Reduction p. 44
Macro Mode p. 45
Manual Focus p. 93
Auto Rotate Function p. 95
(Red) Movie Recording Mode p. 56
3.8x 4.9x 6.1x 7.6x 9.3x 12x Digital Zoom Setting*2 p. 47
Camera Shake Warning p. 14
Low Battery p. 17
When a Shooting mode setting is changed, thesettings appear on the LCD monitor for about 6seconds even if the LCD monitor is set toStandard (No Information) or off. (The Shootingmode settings may not appear depending on the
camera setting.) You can set the flash, Macromode, and the manual focus settings while thisinformation appears on the LCD monitor.
and the icons in (the shaded area ofthe chart) appear even when the informationview is turned off.
In addition to the above, the AF frame, spotmetering frame, shutter speed, aperture value,recordable images or recordable movie time aredisplayed as in the example to the left.
Setting the shooting mode dial to ormodes turns the LCD monitor on regardless ofwhether it is set to on or off.
A slow shutter speed has likely been selectedbecause of insufficient lighting if the upperindicator blinks orange after the meteringpreparations are complete and the camera shakeicon ( ) displays in the LCD monitor. Set theflash to or , or affix the camera to a tripodto shoot.
After you take a photo by fully pressing theshutter button, the image displays on the LCDmonitor for approximately two seconds (or thereview duration you set from 2 to 10 seconds). Ifyou press the SET button while the image isdisplayed, it will continue to display (p. 37).
-
8/4/2019 Canon a95 En
30/163
28
Preparing the Camera
Playback Mode
* Detailed Display is not available in indexplayback (9 images).
Image Number and Total(Display Image/Total)
DISP. Button DISP. Button
DISP. Button
Standard
No Display Detailed*ShootingDate/Time
File Number
Aperture Value
Shutter Speed
Movie Length
Histogram
Compression
Resolution (Still image)Sound memo (WAVE file)
MovieProtection Status
p. 41
p. 98
p. 56p. 100
p. 41
-
8/4/2019 Canon a95 En
31/163
29
Preparing the Camera
PreparingtheCamera,B
asicFunctions
Icons Displayed in Playback Mode(Detailed Display)
Shooting Mode p. 39, 76
Exposure Compensation p. 85White Balance p. 86
Photo Effects p. 90
ISO Speed p. 89
Flash p. 43
Macro Mode p. 45
Manual Focus p. 93
Light Metering Mode p. 83
Resolution (Movies) p. 41Low Battery p. 17
In addition to the above, the shutter speed,aperture value, histogram and recorded movietime are displayed as in the example in the figureon the left.*1: Each mode of the SCN mode appears (p. 51).*2: appears even in No Display mode.
*1
*2
The following information may also appear withsome image files.
An audio file other than a wave file, or a filewith unrecognized format, is attached.
JPEG file with format not conforming toDesign rule for Camera File SystemStandards
RAW format file
A file with unrecognized format.
The on/off setting of the LCD monitor
display mode is memorized when thecamera is turned off. When the camera isturned on again it assumes the lastmode. However, when the LCD monitoris turned on and the Change thebatteries message appears, the LCDmonitor may not automatically turn on thenext time the camera is started.
-
8/4/2019 Canon a95 En
32/163
30
Preparing the Camera
While a recorded image is displayed onthe LCD monitor, you can check theexposure with the graph (seeAbout theHistogram (below)) that shows thedistribution of the brightness data. If the
exposure requires adjustment, set theexposure compensation and re-shoot.(Press the DISP. button if the histogramand other information is not shown.)
Please note that image informationrecorded by this camera may not displaycorrectly on other cameras and imageinformation recorded by other camerasmay not display correctly on thiscamera.
About the Histogram The histogram is a graph that allows you
to judge the brightness of the shotimage. The greater the bias toward theleft in the graph, the darker the image.The greater the bias toward to the right,the brighter the image. If the image istoo dark, adjust the exposurecompensation to a positive value.
Similarly, adjust the exposurecompensation to a negative value if theimage is too bright (p. 85).
Dark image Balanced image Bright image
Sample Histograms
-
8/4/2019 Canon a95 En
33/163
31
PreparingtheCamera,B
asicFunctions
Basic Functions
Turning the Power On/Off
Turning the Camera On
1 Press the ON/OFF button until thepower lamp lights green (p. 14).Shooting Mode
Current shooting settings will appear in theLCD monitor.
Playback Mode The LCD monitor displays an image.
Turning the Camera Off
1 Press the ON/OFF button again toturn the power off.
Current shooting settings will disappear inapproximately 6 seconds when the LCD
monitor is set to Standard (No Information)or off (p. 26) Power Saving Function
This camera is equipped with a power savingfunction. Depending on the power saving setting,the camera may power down or the LCD monitormay go off automatically.
Auto Power Down[On]:
Shooting mode:Powers down approximately 3 minutes afterthe last time a camera control is accessed.
You will hear a start-up sound and seethe start-up image when the power isturned on. (To change the start-upsound and image, see pages 71, 74and 120.)
The start-up image does not appearwhen the LCD monitor is off in Shootingmode or the A/V OUT terminal isconnected to a TV.
Turning on the camera without thestart-up sound and image Press and hold the SET button, then
turn on the power.
-
8/4/2019 Canon a95 En
34/163
32
Basic Functions
Playback mode:Powers down approximately 5 minutes afterthe last time a camera control is accessed.
Printer connection mode:Powers down approximately 5 minutes after
the last time a camera control is accessed.When the Auto Power Down FunctionActivatesPress the ON/OFF button again.
[Off]:The power saving function does not activate.
Display OffThe LCD monitor automatically shuts offapproximately 1 minute* after the last time a
camera control is accessed.* This time can be changed (p. 72).
When the Display Off Function ActivatesThe LCD monitor display turns back on if anybutton other than the ON/OFF button is pressed.
The power saving function will not activateduring Auto Play or during a computer
connection (p. 99, 108).
Switching between Shooting andPlayback
You can quickly switch between Shootingmode and Playback mode. This is convenientwhen you wish to shoot again after checkingor erasing an image immediately after it isshot.
Shooting ModeSlide the mode switch to .
Shooting Mode
Playback ModeThe lens does not retract for approximately 1minute after the camera switches to Playbackmode.
-
8/4/2019 Canon a95 En
35/163
33
Basic Functions
PreparingtheCamera,B
asicFunctions
Playback ModeOpen the LCD monitor and slide the mode
switch to . When a printer (sold separately) is connected,
images can be printed (see the Direct Print
User Guide). When the camera is connected to a computer,
recorded images can be downloaded to andviewed with a computer (p. 108).
When a printer (sold separately) is properlyconnected, the , , or icon appearson the LCD monitor.
Sh ti Th B i
-
8/4/2019 Canon a95 En
36/163
34
Shooting The Basics
Auto Mode
In this mode, all you have to do is press theshutter button and let the camera doeverything else.
1 Check that the camera is inShooting mode (p. 32).
2Turn the shooting mode dialto .
3 Open the LCD monitor if desired.
4 Aim the camera at the subjectyou wish to shoot.
See Functions Available in Each Shooting Mode(p. 159) at the end of this manual to find out whichsettings can be changed in which Shootingmodes.
Mode Dial
5Use the zoom lever to achieve thedesired composition (relativesubject size in the viewfinder).
The angle of view can be adjusted within the38 to 114 mm range, in 35mm filmequivalent.
When the LCD monitor is on, the combineduse of the digital zoom and optical zoomenables magnified shooting up to approx. 12x(See Digital Zoom, p. 47).
6 Press the shutter button halfway. The shutter button has a two-stage action.
:Decreases the size of thesubject (Wide angle)
:Magnifies the size of thesubject (Telephoto)
-
8/4/2019 Canon a95 En
37/163
35
Shooting The Basics
TheBasics
Pressing HalfwayPressing halfwayautomatically sets theexposure and focus.
Two beeps will sound when the camera hasfinished metering, and the upper indicator willlight green or orange. If the LCD monitor ison, the AF frame will appear green.
The lower indicator will blink yellow and thebeep will sound one time if the subject isdifficult to focus on.
7Press the shutterbutton all the way.Pressing FullyPressing fully releasesthe shutter.
You will hear the shuttersound when the shot iscomplete. Do not move
the camera until youhear this sound. The upper indicator blinks green while data is
recorded onto the CF card.
The picture appears for approximately twoseconds on the LCD monitor, if it is on.
See page 159 for settings that can bechanged in this mode.
With the Review function, you canchange the length of time images showon the LCD monitor after shooting, or setit so they do not show at all (p. 37).
If the orange or yellow indicator blinkswhile you press halfway, you can stillpress fully to take the shot.
Images are first saved into the camerasinternal memory before being recorded
onto the CF card, allowing the nextimages to be taken immediately as longas sufficient space is available in theinternal memory.
The beep and shutter sound can be setOn/Off in the Set up menu (p. 71).
Even when the shutter sound is set to[ , , (On)] (p. 74), no sound willbe heard if [Mute] is set to [On].
There is no shutter sound in movie
mode. Shots cannot be taken while the flash is
charging.
-
8/4/2019 Canon a95 En
38/163
36
Shooting The Basics
Shooting with the Viewfinder
You can save power by turning the LCD monitor off(p. 26) and using the viewfinder to shoot.
1Compose the image so that thesubject appears in the center ofthe frame in the viewfinder(autofocus range).
Viewfinder windowShows approximatecenter of the image
About the Autofocus FunctionThis camera employs AiAF (artificialintelligence autofocus) technology,which uses a broad metering field tocalculate the focal distance with highprecision. It delivers a crisp focus evenwhen the photographic subject is slightlyoff-center.
Image Seen in Viewfinder vs. RecordedImage
When shooting an image, a larger rangethan the one visible in the viewfinderusually gets recorded. You can confirm the
actual range that will be recorded in theLCD monitor. In addition, due to theviewfinders specification, the range visiblein the viewfinder may actually differ fromthe actual recorded image. The closer thesubject is to the lens, the more noticeablethe difference will be. In some cases,portions of images shot up close thatappear in the viewfinder will not appear inthe recorded image. You arerecommended to use the LCD monitorduring macro photography (p. 45).
AF-assist Beam The AF-assist beam will sometimes emit
when the shutter button is pressedhalfway to assist focusing in certainconditions, i.e. dark conditions.
The AF-assist beam can be turned off(p. 69).
For example, if animals are your subject,turn off the beam when shooting in thedark to avoid startling them.However, please keep in mind thefollowing facts.
-
8/4/2019 Canon a95 En
39/163
37
Shooting The Basics
TheBasics
- If the AF-assist beam is turned off, itmay become more difficult for thecamera to focus in dark conditions.
- The red-eye reduction lamp may emitwhen you press the shutter button
halfway even if the AF-assist beam isturned off.In order to prevent any lamp fromemitting before the flash fires, set boththe red-eye reduction function and the
AF-assist beam to [Off] in the Shootingmenu.
Reviewing an Image Right afterShooting
After a photo is taken, the image displays onthe LCD monitor for two seconds. In addition,the image will keep on displaying regardlessof the review duration setting if one of thefollowing operations is performed.
Keeping the shutter button fully pressed Pressing the SET button while the image is
displayed*
Press the shutter button halfway again to stopdisplaying it so that you can shoot the next image.
* Not available in (Stitch Assist) mode.
Mode Dial
You can perform the following whileimages are displayed.* Erase Images Individually (p. 64) Display the setting details of the image
(p. 28). Magnify Images (p. 58) (When pressing
the SET button while the image isdisplayed.)
-
8/4/2019 Canon a95 En
40/163
38
Shooting The Basics
Changing the Image DisplayDuration
The length of time images are displayed after aphoto has been taken can be changed from 2
seconds to 10 seconds or turned off.
1 Press the MENU button. The [ (Rec.)] menu appears.
2Select (Review)using the up ordown button.
3 Select a duration setting usingthe left or right button and pressthe MENU button.
With the [Off] option, the image will notdisplay.
With the [2 sec.] to [10 sec.] options, theimage will appear for the time selected even
if you release the shutter button.Another picture can be taken by pressing the
shutter button even while an image isdisplayed.
-
8/4/2019 Canon a95 En
41/163
39
Shooting The Basics
TheBasics
Using the Mode Dial (Image Zone)
Settings fitting the shooting conditions of your subject can easily be set using the shooting mode dial.
Fast Shutter
Use this mode to shootfast moving objects.
Landscape
Use this mode to shootspacious landscapescenes.
Night Scene
Use this mode to capture human
subjects against the backdrop of anevening sky or night scene. Theflash is directed at the person andthe shutter speed is slow, so boththe person and the background canbe beautifully shot.
Slow Shutter
Use this mode to shootmoving objects to makethem appear blurred,such as river rapids.
Portrait
Use this mode when youwant the subject toappear sharp and thebackground to blur.
Stitch Assist
Use this mode when takingshots that you want tocombine into a panorama(p. 49).
Special Scene
Select from 8 scenemodes to shoot with themost appropriate settingsfor the scene (p. 51).
MovieUse this mode to shootmovies. Sound is alsorecorded simultaneously(p. 56).
-
8/4/2019 Canon a95 En
42/163
40
Shooting The Basics
1 Turn the shootingmode dial and setthe icon of themode you wish to
use to . Shooting procedures arethe same as for themode (p. 34).
and Shooting ModesAlways use a tripod to prevent camerashake.
See page 159 for settings that can bechanged in this mode.
Tips for each function:
Portrait Mode You can achieve a better blurring effect
of the background by making sure theupper half of your subject fills the entireLCD monitor or viewfinder.
You can enhance the blurring effect ofthe background even more by setting thelens to its telephoto end setting.
Landscape Mode The icon (camera shake warning)
may appear on the LCD monitor sinceslower shutter speeds are frequentlyused in this mode. If this happens, affixthe camera to a tripod.
Night Scene Mode The shutter speed slows down. Even if
you use the flash, tell your subjects not tomove for a few moments.
If the Night Scene mode is used to shootmid-day shots, the same effects as withthe mode can be obtained.
Fast Shutter Noise in the recorded image mayincrease if you shoot in dark conditions.
-
8/4/2019 Canon a95 En
43/163
41
Shooting The Basics
TheBasics
Changing the Resolution and Compression
You can change the resolution andcompression (excluding movie) depending onthe purpose.
Mode Dial
* The Postcard Print mode is not available in and .
Resolution Purpose
L(Large)
2592 x1944pixels
High
Low
Print larger than A4 size*210 x 297 mm (8.3 x 11.7in.) prints
Print larger than Letter
size* 216 x 279 mm (8.5 x11 in.) prints
M1(Medium 1)
2048 x1536pixels
Print up to A4 size* 210 x 297mm (8.3 x 11.7 in.) prints
Print up to Letter size* 216 x279 mm (8.5 x 11 in.) prints
M2(Medium 2)
1600 x1200
pixels
Print postcard size 148 x100 mm (6 x 4 in.) prints
Print L size 119 x 89 mm(4.7 x 3.5 in.) prints
S(Small)
640 x480pixels
Send images ase-mail attachments
Shoot more images
**
Movies can be shot with the following resolutions.
1 Press the FUNC. button.
2Select L* using
the up or downbutton.* The current setting is
displayed.
or(PostcardPrint Mode)
The resolution is set to M2 (1600 x1200) and the compression is set to
(Fine). See page 54 for Postcard Print
mode information.
* Paper sizes vary according to region.
Compression Purpose
Superfine High Quality
Normal
Shoot higher quality images
Fine Shoot normal quality images
Normal Shoot more images
Resolution640 x 480 pixels
320 x 240 pixels
160 x 120 pixels
-
8/4/2019 Canon a95 En
44/163
42
Shooting The Basics
3 Select theresolution youwish to set usingthe left or right
button.
4Press the SET button.5Select thecompression youwish to set usingthe left or rightbutton.
You can shoot the image right after selectingsettings by pressing the shutter button. This
screen will appear again, once the image isshot.
6 Press the FUNC. button.
Numberof recordable images(Only displayed whenthe resolution,compression or fileformat is selected)
Excluding Image File Size (Estimated) (p. 146) CF Cards and Estimated Capacities
(Recordable Images) (p. 145)
-
8/4/2019 Canon a95 En
45/163
43
Shooting The Basics
TheBasics
Using the Flash
Use the flash according to the guidelines below.
1 Press the button
to switch betweenflash modes. The selected flash mode
appears on the LCDmonitor.
Mode Dial
* In (Fireworks), the flash is prohibited.
Auto withred-eyereduction
The flash fires automatically asrequired by the lighting level, andthe red-eye reduction lamp fireseach time the main flash fires.
AutoThe flash fires automatically asrequired by the lighting level.
Flash on
withred-eyereduction
The red-eye reduction lampand the flash always fire.
Flash on The flash always fires.
Flash off The flash does not fire.
*
You can switch between settings by pressingthe button.
This operation may not work in certainShooting modes (p. 159).
2Shoot the image. The flash will fire if the upper indicator lightsorange when the shutter button is pressedhalfway. (Does not fire in .)
Shooting procedures are the same as for themode (p. 34).
When the red-eye reduction function is on
When the red-eye reduction function is off
When shooting with a high ISO sensitivityand using the flash, there is more of a
chance of overexposure the closer you areto the subject.
-
8/4/2019 Canon a95 En
46/163
44
Shooting The Basics
When shooting in any mode other thanmode, the flash fires with automatic
adjustments. The flash fires twice. A pre-flash will fire
and will be followed by the main flash.
The pre-flash is used by the camera toobtain the subjects exposure data sothat the main flash can be set to theoptimal intensity for the shot.
In mode, the flash fires with themanually set adjustments.
The fastest shutter speed for flashsynchronization is 1/500 second. Thecamera automatically resets the shutter
speed to 1/500 second if a faster speedis selected. In mode, the [Flash Output] option
can be changed (p. 91). Shots cannot be taken while the flash is
charging. The flash may take up to approximately
10 seconds to charge in some cases.Actual times will vary according tousage and the battery charge.
The flash setting is saved when thecamera is turned off in the , ,and Shooting modes.
Setting the Red-eye ReductionFunction
The red-eye reduction lamp fires when the flash isused in dark areas. This reduces light reflecting
back from the eyes and making them appear red.
1 In the [ (Rec.)]menu, set (Red-eye) to [On].
appears on the LCD monitor.
Red-eye ReductionFor this mode to be effective, the subjectmust be looking right at the red-eyereduction lamp. Try asking them to lookdirectly at the lamp. Even better resultscan be obtained by shooting with thelens set to a wide angle, increasing thelighting in indoor settings or approachingcloser to the subject.
The red-eye reduction function cannotbe set when the Special Scene mode
(p. 51) is set to (Fireworks).
-
8/4/2019 Canon a95 En
47/163
45
Shooting The Basics
TheBasics
Macro Mode
Use the macro mode when the distancebetween the lens and the subject is in therange of 5 to 45 cm (2.0 in. to 1.5 ft.) at wideangle end and 25 to 45 cm (9.8 in. to 1.5 ft.)at telephoto end.Use to take close-up shots of flowers or smallobjects.
1 Press the DISP. button to turn the
LCD monitor on.2Press the
button. The icon appears on
the LCD monitor. Pressing the button
again cancels the macromode.
3 Shoot the image. The lower indicator will light yellow when the
shutter button is pressed halfway.
Mode Dial
* Macro mode is not available in and .
*
Shooting procedures are the same as for theMode (p. 34).
Always use the LCD monitor to composeimages in macro mode. Shooting withthe viewfinder is possible, however, partof the image may not appear in the finalshot (p. 36).
When the lens is zoomed out to the wideangle end, the recordable area isapprox. 56 42 mm (2.2 in. 1.7 in.)*1,and at telephoto end, it is 87 65 mm(3.4 in. 2.6 in.).*2
When the zoom position is locatedbetween the telephoto end and the wide
angle end, the distance between thefront of the lens and the subject will bethe same as the telephoto end.
The exposure may not be optimal whenthe flash is used in macro mode.
*1 Closest focal distance.*2 Maximum optical telephoto setting.
-
8/4/2019 Canon a95 En
48/163
46
Shooting The Basics
Self-timer
1 Press the FUNC.
button and select* (Drive Mode)
using the up ordown button.
* The current setting is displayed.
2Select or using the left orright button and press the FUNC.
button. When is selected, the shutter release will
be delayed for 10 seconds, and when isselected, the shutter release will be delayedfor 2 seconds, after you press the shutterbutton.
3 Shoot the image. When is selected, the self-timer lamp
starts blinking when the shutter button ispressed all the way. The self-timer soundsand the blinking gets faster two secondsbefore the shutter activates.
Mode Dial
When is selected, the self-timer lampblinks fast from the beginning. The shutteractivates in two seconds.
Shooting procedures are the same as for themode (p. 34).
You can change the self-timer sound bychanging the setting in [Self-timerSound] in the [ (My Camera)] menu(p. 74).
See Photo Tips and Information(p. 150).
Sh i Th B i
-
8/4/2019 Canon a95 En
49/163
47
Shooting The Basics
TheBasics
Digital Zoom
Images can be zoomed with the combined
optical and digital zoom functions as follows.Approximately 3.8x, 4.9x, 6.1x, 7.6x, 9.3x and 12x
1 Press the DISP. button to turn theLCD monitor on.
2 In the [ (Rec.)]menu, select(Digital Zoom).
See Selecting Menusand Settings (p. 66).
3 Select [On] using the left or rightbutton and press the MENUbutton.
4 Press the zoom lever toward . The lens will zoom to the maximum optical
telephoto setting and stop. Press the zoomlever toward again to further zoom theimage digitally.
Mode Dial
Press the lever toward to zoom back out.
5Shoot the image. Shooting procedures are the same as for the
mode (p. 34).
The combinedmagnifications of theoptical zoom and digitalzoom are displayed.
The digital zoom cannot be used when the
LCD monitor is off.
Images become coarser the more theyare digitally zoomed.
Since camera shake may become afactor when using the digital zoom, theuse of a tripod is recommended.
Sh ti Th B i
-
8/4/2019 Canon a95 En
50/163
48
Shooting The Basics
Continuous Shooting
Use this mode to shoot successive frames
while the shutter button is pressed.
1 Press the FUNC. button.
2Select * (DriveMode) using theup or downbutton.
* The current setting isdisplayed.
Mode Dial
StandardContinuousShooting
Use this mode to view theimages on the LCD monitor asyou shoot continuously. Theshutter interval is longer in thismode than in mode.
High-speedContinuousShooting
Use this mode to shootcontinuously with a shortshutter interval. You cannotcheck images while shootingcontinuously.
3 Select or using the left orright button and press the FUNC.button.
4 Press the shutter button halfwayto lock the focus.
5Press the shutter button all theway to shoot.
Shooting will stop when the shutter button isreleased.
The shooting speed is as follows.When is selected:Approx. 1.5 shots per
second*When is selected:Approx. 2.0 shots per
second** Large/Fine mode with LCD monitor off (These
figures reflect Canon's testing standard. Theactual figures will vary according to theshooting conditions and settings.)
The interval between frames maylengthen somewhat when the internal
memory becomes full. The flash can be used, but the intervalbetween shots will lengthen toaccommodate the flash recharge time.
Sh ti Th B i
-
8/4/2019 Canon a95 En
51/163
49
Shooting The Basics
TheBasics
Shooting Panoramic Images(Stitch Assist)
Stitch Assist can be used to shootoverlapping images that can later be merged(stitched) to create one panoramic image ona computer.
Mode Dial
To merge the images on a computer, usePhotoStitch, one of the supplied softwareprograms.
Framing a Subject
The PhotoStitch program detects the overlappingportions of adjoining images and merges them.When shooting, try to include a distinctive item(landmark) in the overlapping portions.
Compose each frame so that it overlaps30 to 50% of the adjoining image. Try tokeep the vertical misalignment to within10% of the image height.
Do not include moving items in theoverlap.
Do not try to stitch images that includeboth distant and close items. Objectsmay appear warped or doubled up.
Make the brightness in each image
consistent. The final image will appearunnatural if the difference in brightnessis too great.
Shooting The Basics
-
8/4/2019 Canon a95 En
52/163
50
Shooting The Basics
Shooting
Images can be shot in the following 2sequences in Stitch Assist mode.
1 Turn the Shooting mode dial to. The LCD monitor will turn on.
2Select theshootingsequence usingthe left or right
button and pressthe SET button. The shooting sequence is set. You can also press the shutter button directly
to shoot without pressing the SET button.
Left Right Left to right horizontally
Left Right Right to left horizontally
For good results, pan (swivel) thecamera to take successive shots.
To shoot close-ups, slide the cameraover the subject, keeping it parallel tothe subject as you move it.
3 Shoot the first image. The exposure and white balance settings are
set and locked with the first image.
4 Compose and
shoot the secondimage so that itoverlaps the first.
Minor discrepancies inthe overlap can becorrected with thesoftware.
An image can be retaken. Press the left orright button to return to that frame.
5Use the same procedures toshoot the remaining frames.
A maximum of 26 images can be recorded.
6 Press the SET button after thelast shot.
Sequence
Shooting The Basics
-
8/4/2019 Canon a95 En
53/163
51
Shooting The Basics
TheBasics
A custom white balance setting (p. 87)cannot be set in mode. To use acustom white balance setting, first set it inanother Shooting mode.
The settings in place for the first image
are locked in and cannot be changed forsubsequent shots.
A TV cannot be used as the monitor forshooting in this mode.
See page 159 for settings that can bechanged in this mode.
Special Scene Mode
By simply selecting one of the following 8
modes, you can shoot the image with themost appropriate settings for the scene.
Mode Dial
FoliageAppropriate for shooting imageswith flowers, leaves or trees toenhance color.
Snow
Appropriate for shooting thesubject against the backdrop ofsnowy mountains whilepreventing dark subjects andbluish backgrounds.
Beach
Appropriate for shooting scenesby the sea or on sunlit sandybeaches while preventing darksubjects.
FireworksAppropriate for shooting fireworksclearly with the optimal exposure.
Shooting The Basics
-
8/4/2019 Canon a95 En
54/163
52
Shooting The Basics
Underwater
Appropriate for shooting imageswith the Waterproof Case WP-DC50 (sold separately). Thismode uses an optimal whitebalance setting to reduce bluish
tones and record images withnatural hues. The flash iscontrolled to fire as seldom aspossible.
Indoor
Prevents camera shake andmaintains the subject's true colorwhen shooting under fluorescentor tungsten lighting. Theexposure is regulated so as to
avoid the use of flash as much aspossible.
Kids & PetsAppropriate for shooting movablesubjects such as children or pets.
Night Snapshot
Appropriate for shooting humansubjects against the backdrop ofan evening sky or night scenewithout using a tripod to reducecamera shake.
1 Turn the mode dial to (SpecialScene mode).
The current Scene mode screen is displayed.
2Select the scene you wish to
shoot using the left or right buttonand shoot the image.
The name of the Scene mode is displayed forsix seconds each time you change the mode.
Shooting procedures are the same as for themode (p. 34) excluding .
For the shooting procedures of , see theWaterproof Case User Guide included with
the Waterproof Case WP-DC50 (soldseparately).
Shooting The Basics
-
8/4/2019 Canon a95 En
55/163
53
Shooting The Basics
TheBasics
Foliage Snow Beach
Indoor Underwater
Fireworks
Kids & PetsNight Snapshot
In mode, the shutter speed slows down. Use a tripod to avoid camera shake.In , , and modes, the ISO speed may increase and cause noise in the image.In , shooting subjects in the following range: 1 to 4 m (3.3 to 13 ft.) (telephoto end) or 1 m(3.3 ft.) ~ infinity (other zooming positions).
See page 159 for settings that can be changed in this mode.
In , using the LCD monitor is recommended. Results may vary depending on the subject. When shooting images underwater, always turn the power off before inserting the camera into
the waterproof case (sold separately). In or modes, using waterproof case WP-DC50 (sold separately) is recommended.
Shooting The Basics
-
8/4/2019 Canon a95 En
56/163
54
Shooting The Basics
Postcard Print Mode
You can shoot images with settings
appropriate for postcard size printing. When printing standard image data to postcardsize, sometimes the top and bottom sides maynot get printed.
By shooting images in the Postcard Print mode,you can check the printing area (vertical/horizontal ratio of 3:2) beforehand. In addition,the resolution locks to M2 (1600 x 1200) and thecompression locks to the (Fine) setting,rendering smaller file sizes.
1 Press the FUNC. button.
2Select L* usingthe up or downbutton.
* The current setting isdisplayed.
3 Select(Postcard) usingthe left or rightbutton.
Mode Dial
You can shoot the image right after selectingsettings by pressing the shutter button. Themenu displays again after the shot, allowingyou to change the settings easily.
4 Press the FUNC. button.
5Shoot the image. When you press the
shutter button halfway,the area that will not getprinted (the top andbottom sides) grays out.
Shooting procedures arethe same as for the
mode (p. 34).
Selecting cancels the [On] setting ofthe digital zoom.
Shooting The Basics
-
8/4/2019 Canon a95 En
57/163
55
Shooting The Basics
TheBasics
Embedding the Date in the Image Data
You can embed the date on image data when
is selected. The date will be printed on your imageseven if it has not been set by the computer orprinter. Ensure that the cameras date/time is set
beforehand (p. 21). You cannot embed the date on image data when
is not selected.
1 Check that appears on theLCD monitor.
Some settings are not available withcertain Shooting modes. Please refer toFunctions Available in Each ShootingMode (p. 159).
When [Date Stamp] (p. 55) is set to
[Date] or [Date & Time], appears onimages in step 2 and 3.
For printing instructions, refer to theDirect Print User Guide.
2Select (DateStamp) in the [(Rec.)] menu.
See Selecting Menusand Settings (p. 66).
3 Select [Off], [Date]or [Date & Time]using the left or rightbutton.
See Setting the Date/Time (p. 21).
4 Press the MENU button.5Shoot the image.
Shooting procedures are the same as for themode (p. 34).
The Date Stamp cannot be deleted fromthe image data once it has been set.
When using a CP printer, part of the
date may not get printed if the creditcard size print (54 mm x 86 mm) isselected.
Shooting The Basics
-
8/4/2019 Canon a95 En
58/163
56
Shooting The Basics
Movie Mode
Use this mode to shoot movies. The
resolution can be set to [ (640 480)],[ (320 240)] or [ (160 120)] (p. 41).
1 Turn the Shooting mode dial to.
The LCD monitor turns on and displays themaximum recording time (in seconds).
2Press the shutter button all the
way. Shooting and sound recording startssimultaneously.
During the shooting a red circle appears inthe upper right of the LCD monitor.
3 Press the shutter button all theway to stop recording the movie.
The maximum length of individual movie clipsis 30 seconds (10 frames/second) at thesetting and 3 minutes (15 frames/second) atthe and settings.
Mode Dial
Recording times vary by the CF card. See CFCards and Estimated Capacities (RecordableImages) (p. 145)
The maximum length of individual movie clipsmay vary with the subject and shooting
conditions. Recording will automatically stopwhen the maximum is reached or when the CFcards runs out of free capacity.
The recording time may not displayproperly during shooting or filming maystop unexpectedly with the followingtypes of CF cards.- Slow recording cards- Cards formatted on a different camera
or a computer- Cards which have had imagesrecorded and erased repeatedly
Although recording time may not displayproperly during shooting, the movie willbe recorded correctly on the CF card.Recording time will display properly ifyou format the CF card in this camera(excluding slow recording CF cards).
You are recommended to use a CF card
that has been formatted in your camerato shoot movies (p. 19). The cardsupplied with the camera may be usedwithout further formatting.
Shooting The Basics
-
8/4/2019 Canon a95 En
59/163
57
Shooting The Basics
TheBasics
Be careful not to touch the microphonewhile shooting.
The AE, AF, white balance and zoomsettings are set and locked to thesettings of the first frame.
After a shot, the upper indicator blinksgreen while the movie clip is beingrecorded to the CF card. You cannotshoot again until it stops blinking.
See page 159 for settings that can bechanged in this mode.
Sound is recorded monaurally. There is no shutter sound in movie
mode. QuickTime 3.0 or higher is required to
playback movie files (AVI / MotionJPEG) on a computer. (QuickTime (forWindows) is bundled on the suppliedCanon Digital Camera Solution Disk. Onthe Macintosh platform, QuickTime 3.0or later is generally bundled with MacOS 8.5 or later operating system.)
Playback The Basics
-
8/4/2019 Canon a95 En
60/163
58
y
Displaying Images Individually(Single Image Playback)
You can view the recorded images on theLCD monitor.
1 Open the LCD monitor. The position of the LCD monitor can be
adjusted to suit your viewing position.
2Slide the modeswitch to .
The last recorded imageappears (single image
playback).
3 Move between images using theleft or right button.
Use the left button to move to the previousimage and the right button to move to thenext. Holding the left or right button movesmore rapidly between images, but the imageswill not appear as clearly.
Magnifying Images
Images can be magnified up to approximately10 times in single image playback.
1 Slide the mode switch to .
2Press the zoom lever toward .
You may not be able to play back imagesthat have been shot with another cameraor edited on a computer with othersoftware applications.
Press the DISP. button to show the datafor the displayed image (p. 28).
Press the button to quickly delete thedisplayed image (p. 64).
Approximate position
Playback The Basics
-
8/4/2019 Canon a95 En
61/163
59
Playback The Basics
TheBasics
You can move around the magnified imageusing the up, down, left or right button.
Pressing the zoom lever toward whileholding the SET button down magnifies theimage approx. 2.5 times, approx. 5 times and10 times in order.
Canceling the Magnified Display
1 Press the zoom lever toward .
Viewing Images in Sets ofNine (Index Playback)
Up to 9 images can be viewed at once inindex playback.
1 Slide the mode switch to .
Movie frames and index playback imagescannot be magnified.
You can magnify an image while it isdisplayed on the LCD monitor in Shootingmode immediately after the image is shot(p. 37).
2Press the zoom lever toward . 9 images appear at once (index playback).
3 Change the image selectionusing the up, down, left or right
button.
4 Press the zoom lever toward . Index playback cancels and the display
reverts to single image playback.
Pressing the up button inthis row displays theprevious set of 9 images.
Pressing the down button
in this row displays thenext set of 9 images.
MovieSelected Images
Press the DISP. button to show theinformation for the displayed image (p. 28).
Playback The Basics
-
8/4/2019 Canon a95 En
62/163
60
y
Jumping Between Images
The display can be advanced or set back 9images in index playback.
1Press the zoom lever towardwhile in index playback (p. 59).
The jump bar appears.
2Change the imageselection.
Jump 9 images back orforward using the left orright button.
Pressing the left or rightbutton while holding theSET button displays thefirst set or last set of 9images.
3 Press the zoom lever toward . The jump bar disappears and the camera
returns to index playback. If you press the zoom lever once more
toward , the camera returns to singleimage playback.
Jump Bar
Viewing/Editing Movies
Viewing Movies
You can playback the images shot in mode.
1 Slide the mode switch to . Movies cannot be viewed in index playback.
2Select a movie using the left orright button and press the SETbutton.
A movie displays with the icon on it. The movie playback panel appears.
3 Select (Play)using the left orright button andpress the SETbutton.
The movie images andsound will play.
You can adjust thevolume using the up ordown button.
Movie PlaybackPanel
Volume
Playback The Basics
-
8/4/2019 Canon a95 En
63/163
61
y
TheBasics
When a movie has finished playing, it willdisplay the last frame.If the SET button is pressed in this state, thecamera will revert to the movie playbackpanel. If the SET button is pressed again, themovie will start playing from the first frame.
Pausing and Resuming Play Press the SET button to pause the movie. Press
it again to resume.
Fast Forwarding/Rewinding Select one of the following operations using the
left or right button and press the SET button.
(Exit) : Return to single image
playback(First Frame) : Display the first frame(Previous Frame) : Return to the previous frame
(Rewinds if the SET buttonis held down)
(Next Frame) : Proceed to the next frame(Fast forwards if the SETbutton is held down)
(Last Frame) : Display the last frame
Editing Movies
You can delete unwanted portions at the beginningor end of a movie clip.
1 Select the movie you wish to editand press the SET button.
See Viewing Movies (p. 60).
You may experience frame dropping andaudio breakup when playing back a movieon a computer with insufficient systemresources.
The volume at which movies play backcan also be adjusted in the Set up menu(p. 71).
If [Mute] (p. 71) is set to [On] in the Setup menu, the volume setting returns to 0but it can be adjusted using the up ordown button.
Please adjust the audio sound levelon the TV when viewing movie fileson a TV.
Playback The Basics
-
8/4/2019 Canon a95 En
64/163
62
y
2Select (Edit) using the left orright button and press the SETbutton.
The movie editing panel and the movieediting bar appear.
3 Select an