Camera supraveghere video PNI 851W

HD 720p cu IP de exterior conectare wireless sau cablu

- manual de utilizare -

1

2

I. Caracteristici camera supraveghere cu IP PNI 851W

II. Specificatii camera supraveghere cu IP PNI 851W

Ÿ Conexiune P2PŸ Functie IR-CUTŸ Poate fi admistrata la distanta de pe dispozitive mobile iOS si AndroidŸ Inregistrare pe card microSD sau la distanta (necesara conexiunea la internet)Ÿ Suporta protocolul ONVIF; compatibila cu NVR ONVIFŸ Notificare prin email sau pe telefon mobil la detectie miscareŸ 4 utilizatori pot vedea in acelasi timp de pe dispozitive mobile imaginile preluate de

camera video

CPUSistem de operareSenzor imagineCompresieStandard videoRezolutiiRezolutie inregistrareDetectie miscareIluminare minimaFunctie snapshotInregistrareSlot micro SDReteaWiFiLED-uri IRDistanta iluminareClasa de protectieAlimentareConsumTemperatura de lucruUmiditate de lucruDimensiuni / Greutate

Hi3518ELINUX1.0MP (1280 x 720p), CMOSH.264PAL / NTSC1280 x 720 / 640 x 480VGA@25 fps./ 720p/15 fps.Da, cu notificare pe email sau pe telefonul mobil0.1Lux/F1.2DaManuala, programata, la detectie miscareDa (cardul microSD nu este inclus)1 x RJ45, 10/100M802.11 b/g/n1 x LED arraypana la 25 mIP65DC 12V 1A6W-10 ~ +55°C10 - 90%120 x 170 x 65 mm / 393 g

Ethernet

ResetAlimentare

3

1. Introducere:

2. Caracteristici principale CMS:

3. Cerinte tehnice CMS:

CMS este un software de monitorizare a camerelor video. Suporta administrarea si vizualizarea a maxim 64 de camere.CMS poate fi instalat pe computere cu urmatoarele sisteme de operare: Windows XP Sp3, Windows 7, Windows 8, Windows 8.1, Windows 10 (32bit / 64bit).Acest manual descrie modul de utilizare a software-ului CMS incluzand descarcare, instalare, instructiuni de monitorizare a camerelor video, setarea camerelor si alte functii.

Ÿ Sistem de operare: Windows XP Sp3, Windows 7, Windows 8, Windows 8.1, Windows 10 (32bit / 64bit).

Ÿ Resolutie：≥ 1024 x 768Ÿ CPU：> 2.0GHZ dicaryonŸ Memorie: > 4GBŸ Hard disk: > 250GB

Ÿ Conexiune LAN / WiFiŸ Suporta previzualizare de pe 1, 4, 6, 7, 8, 9, 13, 16, 20, 25, 36, 49, 64 canaleŸ Autentificare cu nume utilizator si parolaŸ Suporta redare sunet cu posibilitatea activarii sau dezactivarii acestei functiiŸ Suporta inregistrare locala automataŸ Suporta conectare automata a dispozitivului monitorizat la deschiderea software-ului Ÿ Suporta control PTZ (functie inactiva pentru acest model de camera video)

5. Autentificare in CMS:

4. Descarcare CMS:

Puteti descarca si instala software-ul CMS de pe CD-ul inclus in pachet.

5.1 Autentificare localaNume utilizator implicit: adminParola: 00000000Dupa autentificare, cautati dispozitivele de monitorizare din aceeasi retea.

III. Instructiuni utilizare Software CMS PNI Smarthome PC client

4

5.2 Autentificare de la distantaFolositi aplicatia pentru dispozitive mobile. Inregistrati-va, apoi autentificati-va.NOTA: CMS nu are functie de inregistrare utilizatori.

Aceasta interfata permite:- adaugarea, stergerea si administrarea camerelor video din retea- selectarea modului de afisare a camerelor- setare si redare inregistrari video locale

6. Interfata aplicatie:

7. Lista camere video:

Click dreapta pe “Device List”:

5

Click pe butonul pentru a adauga un dispozitiv. Pentru adaugarea unei camere, utilizatorul poate folosi cautarea automata sau poate adauga manual o camera completand campul UID.

Selectati camera, faceti click dreapta si selectati “Remote Setup”. Puteti seta adresa IP si rezolutia video a dispozitivului.

8. Setari de la distanta:

6

Dupa ce ati adaugat parametrii de retea, software-ul CMS va actualiza automat toate setarile camerei.

Apasati pe butonul “Record” pentru a seta rezolutia inregistrarilor video:

Utilizatorul poate selecta: Intercom, functii video (Capture si Stop Record) sau mod de afisare (Standard definition - implicit sau High Definition).

8.1 Setari adresa IP:

8.2 Setari rezolutie video:

9. Afisare ecran:

7

1 - SunetAlegeti un dispozitiv si apasati acest buton2 - Control PTZ (functie inactiva pentru acest model de camera)Alegeti un dispozitiv si apasati acest buton3 - Pagina anterioara4 - Pagina urmatoarePuteti folosi butoanele 3 si 4 si pentru a vizualiza pe rand camerele5 - Ecran intreg6 - Afisare o singura camera7 - Afisare 4 camere8 - Setari afisare multipla: 9, 13, 16, 20, 25, 36, 49, 64 camere

9. Meniu:

10. Setari CMS:

10.1 Setari implicite pentru inregistrare locala (Param tab):

Calea implicita pentru stocare inregistrari video: D:\C Series_CMS FilesSpatiu rezervat pe disc: 1024MBDurata fiecarui fisier video: 60 minuteInregistrarea porneste automat la deschiderea camerei.Camerele din Device list se conecteaza automat cand se deschide software-ul CMS.

8

10.2 Nume utilizator si parola CMS (User tab):

11. Redare inregistrari:

11.1 Redare inregistrari locale:

Cautarea si redarea unei inregistrari locale:

Nume utilizator implicit: admin; Parola: 00000000

Cand redati o inregistrare, implicit sunetul este dezactivat.

Cautati o inregistrare selectand camera video si intervalul de timp. Din lista cu rezultatele cautarii, selectati o inregistrare pentru a o reda.

9

Interfata redare inregistrari locale

12. Istoric operatiuni:

13. Blocare CMS:

Utilizatorul poate accesa istoricul operatiunilor unei anumite camere intr-un anumit interval de timp si poate face o copie de rezerva.

Utilizatorul poate bloca accesul altor utilizatori pentru a garanta securitatea inregistrarilor si a setarilor.

10

IV. Procedura Instalare card de memorie

Pentru a instala un card de memorie MicroSD ( Transflash ) in camera 851W aveti nevoie de urmatoarele:Ÿ Surubelnita cruceŸ Penseta Ÿ Card MicroSD ( Transflash ) Max 32 GBPentru a avea acces la cititorul de card, trebuie sa desfaceti cele 2 suruburi din partea superioara si inferioara a camerei pentru a desface carcasa.

Indepartati usor partea frontala de partea din spate fara sa trageti de fire. Asigurati-va ca ati pozitionat camera corect si ca aveti acces atat vizual cat si fizic la cititorul de card.

Continuati la introducerea cardului in slotul dedicat pozitionat cu pinii catre placa de baza. Eliberati si apasati cardul cu degetul pana auziti un click.

11

Reporniti camera ( din software, sau din alimentare) si verificati daca acesta este disponibil in meniul camerei ( PC, Smartphone) .Pentru scoatere cardului procedati invers: apasati cu degetul pana cand se aude un click. Extrageti cardul .Montati inapoi cu atentie camera folosind cele 2 suruburi.

V. Metoda de configurare camera in retea:

Ÿ Conectati camera la sursa de curent 220VCa si alternativa la conectarea pe WiFi prezentata in manualul pentru Smartphone va prezentam varianta cu cablu de retea:Ÿ Conectati camera in reteaua locala (la Router) folosind un cablu de retea ( Patch

RJ45) pentru prima configurare.Ÿ Folositi aplicatia de pe CD PNI SmartHome PC Client (CMS) pentru a adauga /

vizualiza / configura camera in reteaua locala.

12

USER MANUAL

IP camera PNI 851W720p outdoor wireless or cable connection

13

I. Features IP camera PNI 851W

II. Technical specifications IP camera PNI 851W

Ÿ P2P connectionŸ IR-CUT filterŸ Support iOS/Android monitoringŸ Micro SD card slot;support local and remote recording over a network connectionŸ Support ONVIF protocol; can work with Onvif NVR systemŸ Motion detection via email notificationŸ 4 users viewing from mobile phone at the same time

CPUOperating systemImage sensorVideo compressionVideo StandardsResolutionRecording resolutionMotion detectionMinimum IlluminationSnapshots functionRecording

Micro SD recordingNetworkWiFiIR LEDNight visionWaterproofPower supplyConsumptionWorking temperatureUmiditate de lucruDimensions / Weight

Hi3518ELINUX1.0MP (1280 x 720p), CMOSH.264PAL / NTSC1280 x 720 / 640 x 480VGA@25 fps./ 720p/15 fps.Yes, email or mobile phone notification 0.1Lux/F1.2YesManual recording, schedule recording, motion detection recordingYes (microSD card is not included)1 x RJ45, 10/100M802.11 b/g/n1 x LED arrayup to 25 mIP65DC 12V 1A6W-5 ~ +55°C10 - 90%120 x 170 x 65 mm / 393 g

Ethernet

ResetPower supply

13

14

1. Brief introduction:

2. Main features CMS:

3. CMS Operating Environment:

CMS is a centralized monitoring software for IP cameras. It supports max 64ch online viewing and administering.CMS can be installed on computer with the following operating systems: Windows XP Sp3, Windows 7, Windows 8, Windows 8.1, Windows 10 (32bit / 64bit).This user manual focus on the installation and the use of the CMS, mainly including software download, installation, instruction of real-time monitoring interface, device setting and other functions.

Ÿ Operating system: Windows XP Sp3, Windows 7, Windows 8, Windows 8.1, Windows 10 (32bit / 64bit).

Ÿ Resolution：≥ 1024 x 768Ÿ CPU：> 2.0GHZ dicaryonŸ Memory: > 4GBŸ Hard disk: > 250BG

Ÿ LAN / WiFi connectionŸ Support 1.4.6.7.8.9.13.16.20.25.36.49.64 ch multi-image selectionŸ Local login with user name and passwordŸ Support record with audioŸ Support automatically local recordŸ Support automatically connect the devices when open the CMSŸ Support Pan Tilt control (inactive function for this camera model)

5. CMS login:

4. CMS download:

You can download and install the CMS from the CD included in the package.

5.1 Local loginDefault user name: adminPassword: 00000000After using local login, CMS clients will automatically search for devices in the same LAN, and prompts the user whether to add..

III. User instructions Software CMS

14

15

5.2 Remote loginUse mobile application to log in with registered user name and password ; CMS does not support registration function.

This CMS allows you to:- Add, delete and monitor the IP cameras from the same network- Multi-screen control- Local Management: Settings, Local video playback and log management

6. Application Interface :

7. Lista camere video:

Click dreapta pe “Device List”:

16

Click button to add a device: the user can manually add a camera filling the UID field or he can use the IP camera search function.

Select the device, right click and choose "Remote setup", the user can set the IP address and the video resolution of the device.

8. Remote settings:

17

When entering the network settings, CMS will automatically refresh the parameters and current status of the device settings.

Click “Record” button to set the recording resolution:

The user can select: Intercom, video function (Capture and Stop Record) or display mode (Standard definition - default or High Definition).

8.1 IP address setup:

8.2 Video Resolution Settings:

9. Viewing the screen:

18

1 - SoundChoose a device and click this button2 - PTZ control (this function is not supported by 851W camera)Choose a device and click this button3 - Previous page4 - Next pageYou can choose 3 and 4 buttons to see the devices one by one 5 - Full screan6 - Single picture7 - Four-pictures composition 8 - Multi-screen Setting9-pictures, 13-pictures, 16-pictures, 20-pictures, 25-pictures, 36-pictures, 49-pictures, 64-pictures

9. Menu:

10. CMS settings:

10.1 Set the local recording parameters (Param tab):

The default video file path: D:\C Series_CMS FilesThe reserved video free disk space: 1024MBThe duration of each file of record: 60 minutesVideo file cover function is defaulted open.The video is recorded automatically when open the device.

19

10.2 User name and password for CMS management (User tab):

11. Video playback:

11.1 Local playback video:

Search and play a local video:

Default user name: admin; Password: 00000000

When you playback a video, the audio is closed.

Search a device selecting record file type, begin time and end time. From the list, select a file to play.

20

local video playback operating interface

12. Operating log:

13. Lock CMS:

The user can check the device CMS operating record via operating log function,and backup it.

The user can block the access to other users to ensure the security of the records and settings.

21

IV. Memory Card Installation Procedure

To install a memory card MicroSD (TransFlash) in 851W video camera you need the following::Ÿ Cross screwdriverŸ TweezersŸ MicroSD ( Transflash ) card max 32 GBTo access the card reader, you must unscrew the two screws at the top and bottom of the camera to loosen the case.

Gently remove the front to the back without pulling wires.Make sure you have positioned the camera correctly and that you both visually and physical access to the card reader.

Grab the card with the tweezers (as shown in the pictured) and proceed to its introduction into the card slot positioning it with the pins turned to the motherboard. Press the card until you hear a click.

22

Restart the camera.To remove the card proceed opposite: press card with the tweezers and release when you hear a click. Extract card with the tweezers. Fit back carefully the camera using the 2 screws.

V. Camera configuration in the network:

Ÿ Connect the camera to 220VConnectiong with cable network:Ÿ Connect to your local network (to the Router) using a network cable (RJ45 Patch)

for the first configuration.Ÿ Use the CD application PNI SmartHome PC Client (CMS) to add / view / configura

the camera in the local network.

23