cactaur - world of final fantasy · pdf filestart with a square coloured side up. 1 2 3...

Start with a square coloured side up.

1 2 3

CACTAUR

Fold and unfold the square lengthwise.

Fold the upper edge down at the same time refold the creases

made previously. This will make a preliminary base.

Fold and unfold the square in half diagonally along both axes. Then

turn the paper over left to right.

WORLD OF FINAL FANTASY © 2016 SQUARE ENIX CO., LTD. All Rights Reserved. CHARACTER DESIGN: TETSUYA NOMURA / YASUHISA IZUMISAWA.

Diagrams © 2016 Creaselightning Limited www.creaselightning.co.uk

10 11

4 65

9

Fold edge over again. Unfold to step 5.Fold the upper corner down to the adjacent folded edge.

7 8

12

Fold in progress. Fold the corner down to the folded edge.

Fold the lower corner up to the top.

Fold and unfold the outer edge to the middle.

Fold the corner up, separate the layers and squash the point flat.

Fold the upper layer back.

5



Open the model back to a square. (Step 2).

Repeat steps 10 to 11 on the other side.

Repeat steps 10 to 14 behind.Fold the edge back.

(10-11)(10-14)

Re-fold the preliminary base shape. At the same time reverse in the

middle section causing a sink fold.


Fold the edge back to the right.

Fold the corner up, separate the layers and squash the point flat.

(18-19) (18-20)

Repeat steps 18 to 20 behind.

13 14 15

16 17

19 20 21

18

2



Fold and unfold the edges to the middle.

Fold and unfold the model along the middle.

Fold the upper layer of the middle section up, this will cause the outer

edges to fold in.

(23-27)(23-27)

Fold the section back down again.Fold the tip of the triangular section over, about one quarter.

25 26 27

Fold one edge over.

22 23 24

Fold the lower point up.

28 29 30

Repeat steps 23 to 27 on the other three faces.

Fold one side over.



31 32 33

34

37

35

38

36

39


Fold the edges in to the middle.

Fold the point over.

Fold the section back over.

Fold one side over.

Fold one side in, this will force the upper edge of the

perpendicular point to fold over.

Fold the side back, at the same time fold the point down to lie

perpendicular to the central section.

Fold corner over, repeating step 32.

Turn the model over left to right.

(30-35)



40 4142

43 44 45

46 47 48

Reverse fold the legs again to shape the feet.

Complete.

Reverse fold the left arm and turn the right arm inside out.

Reverse fold the legs.

Fold the edges back together.

Fold the edges of the legs behind.

Fold the tips of the arms inside.

Fold the tip of the foot inside.


(39-40)



1 2

19cm

5.5cm

3

CACTAUR’S HAT

CACTAUR

HAT

Start with a square about 30% the size of the main Cactaur

model.

Fold down the upper section. Fold the section back up again.Fold and unfold the square in half diagonally along both axes. Then

turn the paper over left to right.

4 65

Fold the upper corner over. Fold the upper section down and then back up again. Then turn the

model over.

Turn the model over.



10 11

9

Fold the upper section down. Fold the upper corners over and into the model.

Fold the sides behind at a slight angle.

7 8

12

Turn the model over. Turn the model over.Fold the lower section up.

Fold the upper corner down to touch the adjacent folded edge.

Complete.Tuck the upper section into the model.

13 14 15



cactaur - world of final fantasy · pdf filestart with a square coloured side up. 1 2 3...

Documents