IDS FEATURES: + 5th line function with only 4 lines + Depower on Demand: 1st Stage of Depower + Stage 2 Depower + Improved, direct steering. + Enhanced Control System + Instant Relaunch

STAINLESS STEEL BRIDLE GUIDESThe Stainless Steel bridle guide is a non mechanical pulley guide with no moving parts. It is far superior in strength to a standard pulley of the same size.

NEW KITE LINESThe flying lines are now monofilament wound Dyneema lines. These high strength lines are not only low stretch and durable but are also much easier to manage when setting up your kite.

KITE BAGFor 2011 we have re-engineered our kite bags to fulfill all the riders needs.Starting with the regular kite bag, we have upped the volume size, moved the bar back to the outside and also brought back the board carry straps. With these new features it makes it easier for any budding explorer to load up in search of the new secret spot.

Inside the bag we have also added an expandable storage option. With the combined use of both heavy duty materials in the high load areas, and light weight mesh to aid in airing the kite, we have created a fully functional, durable bag that adds even more opportunity to the rider with regards to storage.

PRINTED CANOPY MATERIALWe roll print the pattern directly onto the raw, unfinished material. The performance finishing process of the material takes place after the roller printing. The benefit of this, is that the ink is now printed directly onto raw unfinished fibers of the base material so there is an excellent absorption of the inks. Since the finishing process takes place afterwards, this seals the inks permanently into the fibers in comparison to screen printing on top of the slippery, water repellant chemicals used in the finishing process.

Since the inks are printed directly onto the raw white color material there is a very high absorption of the inks so the printed graphic is nearly the same on both sides of the material. When backlit from the sun the material is nearly identical on both sides. This also this makes extremely vibrant colors and illuminated designs previously unavailable using typical screen printing processes. Another Industry first for Cabrinha.

HIGH PERFORMANCE RACE FABRICSThe canopy is a laminate material using a lightweight double rip-stop sub-straight (base) material, fused together with a thin layer of polyester film. The total material weight is within a couple of grams per square meter to normal 53gsm canopy material.

SAFETY AND SIMPLICITYThe Intelligent Depower System (IDS) provides an amazing level of control with minimum rider effort and input. IDS is a simplified bridle and control system exclusive to Cabrinha. IDS produces virtually no bar pressure while delivering precise control of the steering and power of your kite.

IDS is so intuitive that it seamlessly provides 2 stages of depower. Interactive Depower on Demand while riding, and stage 2 Depower method to land your kite. Stage 2 Depower functions similar to a 5th line system, but without the complexity of the unnecessary 5th line. Our IDS equipped kites use only 4 lines for a simple, uncluttered method of control and security. Additionally, the IDS bridle maintains all of the instant relaunch functionality the Cabrinha kites are famous for.

VIDEOCheck out Cabrinhakites.com for the latest Tech videos. Follow along step by step as we walk you through the process.

LEADING THE WAY IN SAFETY AND USABILITY

kite teCH

GET ON THE WATER FAST!The Sprint™* inflation system is a simple to use feature to quickly inflate your kite to an even pressure. The Sprint™ system uses a single inflation point to connect your high volume, two way Cabrinha pump. As you pump your kite with air, all struts and your leading edge inflate quickly and simultaneously to the desired pressure. The supplied pump leash and threaded valve connection keeps your kite under control even when pumping up directly in the wind.

BAR ENDSWe lowered the profile of the EVA floating bar ends. By lowering the bar ends we have better aligned the line winders with the bar. This makes the winders more secure when winding line onto them. In addition, the line winders have increased in size and its geometry of better shaped to hold the line in place.

The EVA bar ends now have Flex Tips. The flexible tips allows the lower half of the bar to remain firm when winding the lines onto the bar.

SAFETY AND SIMPLICITYThe Intelligent Depower System (IDS) provides an amazing level of control with minimum rider effort and input. IDS is a simplified bridle and control system exclusive to Cabrinha. IDS produces virtually no bar pressure while delivering precise control of the steering and power of your kite.

IDS is so intuitive that it provides 2 stages of depower. Interactive Depower on Demand while riding, and a Stage 2 Depower method to land your kite. Stage 2 Depower functions similar to a 5th line system, but without the complexity of the unnecessary 5th line. Our IDS equipped kites use only 4 lines for a simple, uncluttered method of control and security. Additionally, the IDS bridle maintains all of the instant relaunch functionality the Cabrinha kites are famous for.

NEW KITE LINESChanged our flying lines to monofilament wound Dyneema lines. These high strength lines are not only low stretch and durable but are also much easier to manage when setting up your kite.

NEW

NEW

Recoil is a spring loaded function which always keeps the bungee trim adjusters contained and well within reach, making it the cleanest trim adjustment system on the market. With Recoil™ there is never a loose adjustment tail as seen with most above or below the bar trim systems.

The Recoil™ spring always returns the bungeed trim adjusters to their proper place along the depower mainline even after the kite has been fully depowered by the control bar. When you return the bar to the powered position, the bungeed trim adjusters automatically reset themselves to a place which is easy to reach.

Recoil™ also provides adequate resistance to momentarily unspin the bar to unwind the lines.

technology

NEW

BAR teCHLEADING THE WAY IN SAFETY AND USABILITY

2011 Board Program

What’s NewSurfboards all have new graphics and construction. • The new construction has a reinforced deck to reduce heel denting.• Full wood veneer topsheet.• Super light graphics application (water transfer)•

Twintip Board TechnologyQuad Concave• Paulownia Core• ABS Rails• Graphic Foils and effect prints• Stainless Steel Inserts• Lacquered finish• Across the range, boards are lighter•

Surfboard Technology2 Lb density EPS cores• Full length wood deck reinforcement• Carbon deck reinforcements• Future fin boxes• Custom cut traction pads•

SUP Board Technology2lb (density) EPS core• Wood veneer deck reinforcement• Clear epoxy resin• Painted finish• Custom cut 5 mm EVA footpads• Countersunk carry handle• Future Fin System Fins• Self pressure regulating air vent•

VIDEOCheck out Cabrinhakites.com for the latest Board-Tech videos. Follow along as we walk you through the features of your Cabrinha board.

THE DNA FROM TIP TO TAILBoARD teCH

HARDCORE SEC Vertically laminated Paulownia produces a high compression, lightweight core. Paulownia has one of the highest strength to weight ratios of all wood species.The result is simple. Bullet proof, with a smooth, consistent flex pattern. Average Density: 310kg/ m³. Eco-friendly wood core.

QUADCAVEThe Custom, Caliber and Caliber X boards receive the very latest in 3-d bottom shaping with the concave and step bleeding through the perimeter of the board to increase tracking and create and allow true finless performance. The center flat sections reduce the boards tendency to stick on off axis landings and eliminate spray in the eyes by allowing the nose to rider higher.

CORE PROFILESAll our cores are produced with CNC milling. This means that every core is true to our design. Flex, profile and manufacturing consistency are all exact, every time.

ROCKERThe rocker is a key element in the overall feel and performance of your board. We use four distinct rockers based on the performance targets of the boards.

FLEX PATTERNA symmetric pattern provides an identical flex, forward or switch, ideal for all types of riding conditions. The center sections are stiffer to give excellent edge control. Controlled flex in the tips give the boards pop and control in all water conditions.

STANCE OPTIONSA crazy amount of stance options are available now with the addition of insert.

KEVLAR IMPACT PLATESMilitary grade Kevlar reinforcement plates for impact resistance and underfoot load distribution.

CARBON STRINGER (CST)Full carbon stringers “tip to tail” ensure quick rebound, extra pop and livelier feel for your ride.

OCHROMACORE (OCR)Superlight full balsa core, giving natural flex and response - but keeping the board extra light for easy riding in light conditions.

HYBRID CORE (CXB)The all new CXB Hybrid core is a sophisticated hybrid core, of both Lite-Pawlonia and Lite-Balsa. Custom designed per size, the core layup is the lightest and most responsive in the Twin Tip collection, giving the board unrivaled weight saving, yet without sacrificing strength in key areas.

TOP & BOTTOM SHEETSThermopastic Polyurethane (TPU) top and bottom sheet for maximum glide, performance and clarity. UV balanced and protected, so colors will not fade.

RACE FINSOur Race Fins are the last word in tech. Developed using cutting edge Carbon-Kevlar cores, using foils and shapes created by the finest minds in kite design. Using the Powerbox fin system, for strength and performance - we’re confident that our fins will give you the edge you need to succeed.

Tri-Block InsertsOur stainless steel inserts are custom made to eliminate pull out and spinning. Our inserts are all M-6 thread and sized to properly fit the core profiles. They are first mounted into an ABS block, then inserted into the core with absolute precision - making them stronger, and more accurate than ever before!

FUTURE FIN SYSTEMFuture fin boxes are the most user friendly and strongest removable fin system available on the market. The system offers all the positive features of removable fins, while providing better performance than glass-on fins.

FCX CARBONHigh grade carbon assembly for super quick response, and a tighter, lighter ride. 220gm Bi Ax carbon top and bottom offers a perfectly balanced ride, with ultra efficient energy transfer from rider to board, on top of maximum weight saving.

EPSEPS cores are water tight and offer high impact resistance. EPS is combined with a wood laminate and PVC to provide an ultra light durable core.

ABS RAILSMachine finished ABS sidewalls laminated to a horizon-grain core increases impact strength and ensures an accurate, smooth and durable ride.

FIBERGLASS LAMINATESEach board has its own unique layup. We have tested many different configurations of the laminate to produce the best combination of strength and weight. The cores are profiled to dial in the specific flex for a design. Then the laminate is applied to support the flex and increase strength.

NEW NEW

NEW

NEW

NEW

BoARD teCH

SURFBOARDCONSTRUCTION1 EPS Core 2 Glass Reinforcement 160g3 Glass Reinforcement 200g 4 Glass Reinforcement 220g5 Wood .6mm6 Glass 220g Biaxial7 UV Lacquer

CONSTRUCTION / CROSS SECTION

TWINTIP BOARDLAYERS:1 UV lacquer 2 TPU topsheet3 FCX Carbon 4 CST Carbon Stinger 5 Kevlar Plate 6 CXB Core 7 CST Carbon Stinger 8 FCX Carbon 9 TPU bottomsheet

RACE BOARDCONSTRUCTION1 EPS Core 2 Glass Reinforcement 100g3 PVC Reinforcement 3mm 4 Glass Reinforcement 60g (under wood) 5 Glass Reinforcement 60g 6 Wood 0.6mm 7 Glass Reinforcement 100g (over wood) 8 3D EVA Pad 9 NON - Slip Deck Grip

ABS

1

7

2

4

5

6

3

1

7

1

4

6

7

9

8

3

2

5

7

8

9

2

4

5

6

3