cabinetry design and planning guide

32
Accessories Cabinet Finishing Wood Species Face Frame Styles Door Styles Cabinetry Design and Planning Guide MH Custom Cabinetry Inc. Designed to make all our lives easier.

Upload: others

Post on 27-Dec-2021

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Cabinetry Design and Planning Guide

● Accessories ● Cabinet Finishing ● Wood Species ● Face Frame Styles ● Door Styles

Cabinetry Design and Planning Guide

MH Custom Cabinetry Inc.

Designed to make all our lives easier.

Page 2: Cabinetry Design and Planning Guide

MH Custom Cabinetry Inc. Face Frame Styles

Standard● 2” Stiles and Rails ● Doors and drawer fronts overlay the frame 11/16” on all sides. ● 5/8” reveals between doors and drawer fronts (Larger gap

between doors and drawers)● 1/8” reveal between pair doors

Semi-Faceless

Inset

● 1 1/2” Stiles and Rails ● Doors and drawer fronts overlay the frame 11/16” on all sides ● 1/8” reveals between doors and drawer fronts● 1/8” reveal between pair doors● “Tight reveal” look

● 1 1/2” Rails and 2” Stiles* ● Doors and drawer fronts are set inside of frame with 3/32”

Spacing around them● 1/8” reveals between pair doors.

Page 3: Cabinetry Design and Planning Guide

MH Custom Cabinetry Inc. Face Frame Styles

Beaded Inset● 1 1/4” Top Rails with 5/16” Bead ● 1” Middle rails with 5/16” Bead● Doors and drawer fronts sit inside flush with face frame. ● 1/8” reveals between doors and drawer fronts and surrounding

bead.● 1/8” reveal between pair doors

Full Overlay

Euro (Frameless)

● 13/16” End Stiles with 1 1/2” and 1” Stiles and Rails ● Doors and drawer fronts overlay the frame 11/16” on all sides ● 1/8” reveals between doors and drawer fronts● 1/8” reveal between pair doors● Very minimal amount of Face Frame showing. ● Fillers in corners and against walls.

● No Face Frame● ¾” Plywood Construction ● Taped Edges on Doors and Cabinet Ends● Plywood Doors w/ Veneer● 1/8” reveals between doors and drawer fronts ● 1/8” reveal between pair doors

Page 4: Cabinetry Design and Planning Guide

➔ Widths vary depending on style➔ Solid hardwood ➔ Frames are pinned and glued to cabinet box for

strength and stability.

➔ 3/4” thick plywood (5/8” when needed)➔ 1/4" thick plywood backs➔ Interior finish

◆ Pre-finished maple ◆ Melamine ◆ Exposed (matches wood species)

➔ Exterior Finish ◆ Unfinished ◆ Natural (Clear Coat)◆ Stained◆ Painted

➔ 1/2” Prefinished maple/birch plywood sides*➔ 1/4" Prefinished maple/birch bottom*➔ Drawers are connected by dados, pin nails, and

glue for strength and stability. ➔ Dovetail drawer boxes are available upon request

MH Custom Cabinetry Inc. Cabinet Construction Materials

➔ 3/4” Thick plywood ◆ Prefinished Maple with taped edge◆ If open or glass door cabinet, plywood would

match wood species

➔ Blum 110 Soft Close ◆ Concealed ◆ Three dimensional adjustment◆ Simple tool-free assembly

➔ If another hinge style is desired, please just ask and we will let you know if we are able to make it work

➔ Blum Tandem Soft Close Guides◆ Under mount hidden guides◆ 100 lbs load capacity◆ Full Extension

Page 5: Cabinetry Design and Planning Guide

Door Selection Guide MH Custom

Cabinetry Inc.

Inside Profile Door Edge

Panel Profile

Door Style: Raised Panel #100

Door Edge (Showing E-2)

Inside Profile(Showing P-1)

Panel Profile(Showing Pnl-01)

Door Detail Side View

Page 6: Cabinetry Design and Planning Guide

MH Custom Cabinetry Inc. Door Styles

Shaker Inset Panel#116 (Shown in Cherry)

Reversed Raised Panel #113 (Shown in Knotty Alder)

Shaker Lite Panel #126 (Shown in Alder)

Shaker Rout for Glass#136-01 (Shown in Alder)

Klondike Raised Panel#118-02 (Shown in Hickory)

Shaker Beaded Panel#115 (Shown in Maple)

Shaker Inset Panel Reversed Raised Panel

Klondike Raised Panel

Woodbridge Inset Panel

Solid Solid Solid Solid

Paneled Paneled Paneled Paneled

Page 7: Cabinetry Design and Planning Guide

MH Custom Cabinetry Inc. Door Styles

Winchester Raised Panel#100 (Shown in Maple)

Winchester Inset Panel #110 (Shown in Maple)

Winchester Lite Panel #120 (Shown in Maple)

Winchester Rout for Glass#130 (Shown in Maple)

Woodbridge Raised Panel #118-02 (Shown in Cherry)

Woodbridge Inset Panel #115 (Shown in Cherry)

Winchester Raised Panel

Winchester Inset Panel

Woodbridge Raised Panel

Woodbridge Inset Panel

Solid Solid Solid Solid

Paneled Paneled Paneled Paneled

Page 8: Cabinetry Design and Planning Guide

MH Custom Cabinetry Inc. Door Edge Detail

This detail will apply to all of your Door and Drawer fronts. The cabinet edge detail usually matches this detail as well.

Our most popular details

Page 9: Cabinetry Design and Planning Guide

MH Custom Cabinetry Inc. Inside Profile Detail

This detail will apply to the inside panel of your Doors and Drawer fronts

1 18 39 68

2 23

10** 28 14

11 47 59 19

13 49 20

15 38 50 67Our most popular

styles

36

37

40

45

51

53

57

65

3

Page 10: Cabinetry Design and Planning Guide

MH Custom Cabinetry Inc. Panel Profile Detail

This detail will apply to the panel of your Doors and Drawer fronts if you have a raised panel detail

01 09 42 63

02 10 54 63DF

03 16 55 64

04 20 56 67

06 22 58 68

07 41 59 69

Page 11: Cabinetry Design and Planning Guide

MH Custom Cabinetry Inc. Panel Profile Detail

This detail will apply to the panel of your Doors and Drawer fronts if you have a raised panel detail

70 76 78 91

72 77 80Our most

popular Styles

Page 12: Cabinetry Design and Planning Guide

MH Custom Cabinetry Inc. Wood Species

Please take into account that variations occur in wood color and grain. No two trees are identical. These pictures are an approximation of color and grain for woods available. Please view samples in person before making decisions. Exotic species may be available please call or email to ask about availability.

Red Oak Cherry Hickory Knotty Hickory

White Oak Beech Alder Knotty Alder

Walnut Sapele Maple Poplar (Paint Grade)

Page 13: Cabinetry Design and Planning Guide

● Holleman Brothers uses a Conversion Varnish product to provide a smooth and consistent finish that can stand up to the daily wear and tear your cabinets will be exposed to.

● There are 8 Standard Stains that we offer along with the ability to match any stain or paint you want.

● We have the ability to use oil or water based stains.

● Customers can choose from 4 different finishing enhancements to allow their own personal touch to their cabinetry. Because these enhancements might affect stain or paint color we highly recommend viewing a sample in person.

Glazing Antiqued Sand-Thru Distressed

MH Custom Cabinetry Inc. Finishing

MH Custom Cabinetry partners with Holleman Brothers Finishing for all of their finishing need. For more information please visit hollemanbrothersfinishing.com

Page 14: Cabinetry Design and Planning Guide

Driftwood (on Cherry) Slate (on Cherry) Paprika (on Cherry) Fog (on Cherry)

Java (on Cherry) Wheat (on Cherry) Candlelight (on Cherry) Mocha (on Cherry)

MH Custom Cabinetry Inc. Finishing (Stains)

MH Custom Cabinetry partners with Holleman Brothers Finishing for all of their finishing needs. Below are our stock stains on Cherry wood. Stain matching is available. For more information please visit hollemanbrothersfinishing.com

Page 15: Cabinetry Design and Planning Guide

Driftwood (on Beech) Slate (on Beech) Paprika (on Beech) Fog (on Beech)

Java (on Beech) Wheat (on Beech) Candlelight (on Beech) Mocha (on Beech)

MH Custom Cabinetry Inc. Finishing (Stains)

MH Custom Cabinetry partners with Holleman Brothers Finishing for all of their finishing needs. Below are our stock stains on Beech wood. Stain matching is available. For more information please visit hollemanbrothersfinishing.com

Page 16: Cabinetry Design and Planning Guide

Driftwood (on Hickory) Slate (on Hickory) Paprika (on Hickory) Fog (on Hickory)

Java (on Hickory) Wheat (on Hickory) Candlelight (on Hickory) Mocha (on Hickory)

MH Custom Cabinetry Inc. Finishing (Stains)

MH Custom Cabinetry partners with Holleman Brothers Finishing for all of their finishing needs. Below are our stock stains on Hickory wood. Stain matching is available. For more information please visit hollemanbrothersfinishing.com

Page 17: Cabinetry Design and Planning Guide

Driftwood (on Alder) Slate (on Alder) Paprika (on Alder) Fog (on Alder)

Java (on Alder) Wheat (on Alder) Candlelight (on Alder) Mocha (on Alder)

MH Custom Cabinetry Inc. Finishing (Stains)

MH Custom Cabinetry partners with Holleman Brothers Finishing for all of their finishing needs. Below are our stock stains on Alder wood. Stain matching is available. For more information please visit hollemanbrothersfinishing.com

Page 18: Cabinetry Design and Planning Guide

Driftwood (on Knotty Alder) Slate (on Knotty Alder) Paprika (on Knotty Alder) Fog (on Knotty Alder)

Java (on Knotty Alder) Wheat (on Knotty Alder) Candlelight (on Knotty Alder) Mocha (on Knotty Alder)

MH Custom Cabinetry Inc. Finishing (Stains)

MH Custom Cabinetry partners with Holleman Brothers Finishing for all of their finishing needs. Below are our stock stains on Knotty Alder wood. Stain matching is available. For more information please visit hollemanbrothersfinishing.com

Page 19: Cabinetry Design and Planning Guide

Driftwood (on Knotty Hickory) Slate (on Knotty Hickory) Paprika (on Knotty Hickory) Fog (on Knotty Hickory)

Java (on Knotty Hickory) Wheat (on Knotty Hickory) Candlelight (on Knotty Hickory) Mocha (on Knotty Hickory)

MH Custom Cabinetry Inc. Finishing (Stains)

MH Custom Cabinetry partners with Holleman Brothers Finishing for all of their finishing needs. Below are our stock stains on Knotty Hickory wood. Stain matching is available. For more information please visit hollemanbrothersfinishing.com

Page 20: Cabinetry Design and Planning Guide

Driftwood (on Maple) Slate (on Maple) Paprika (on Maple) Fog (on Maple)

Java (on Maple) Wheat (on Maple) Candlelight (on Maple) Mocha (on Maple)

MH Custom Cabinetry Inc. Finishing (Stains)

MH Custom Cabinetry partners with Holleman Brothers Finishing for all of their finishing needs. Below are our stock stains on Maple wood. Stain matching is available. For more information please visit hollemanbrothersfinishing.com

Page 21: Cabinetry Design and Planning Guide

MH Custom Cabinetry Inc. Accessories - Paneled Ends

Base

Wall

TallBase

Tall

Standard Applied Panel Ends Applied Ends to Floor (Furniture Ends)

Top View

Page 22: Cabinetry Design and Planning Guide

MH Custom Cabinetry Inc. Accessories - Paneled Ends

Applied Door Ends

Top View

Base (with Toe Kick)Base (w/out Toe Kick) Tall (with Toe Kick) Tall (w/out Toe Kick)

Wall

Page 23: Cabinetry Design and Planning Guide

2 ⅝” 3 7/16” 4 ¼” 3 ¼”

4 ⅛” 4 ⅜” 2 ⅝” 4”

4 7/16” 3 ⅝” 2 ½” 4 7/16”

MH Custom Cabinetry Inc. Accessories - Crown Detail

Most crowns will have sub crowns associated with them, email or come in to view the sub crown details.Please contact us if you would like a crown that is not listed below.

Page 24: Cabinetry Design and Planning Guide

MH Custom Cabinetry Inc. Accessories - Crown Detail

Most crowns will have sub crowns associated with them. The height of sub crown and top rail size depends on the style of cabinets and the height of your ceiling. Here are a few examples.

33073305

3306 3333

3302 3303 3320

Page 25: Cabinetry Design and Planning Guide

MH Custom Cabinetry Inc. Accessories - Crown Detail

Most crowns will have sub crowns associated with them. The height of sub crown and top rail size depends on the style of cabinets and the height of your ceiling. Here are a few examples.

3315 3316 3308

Flat Flat w/Trim

3329 w/Moulding

Page 26: Cabinetry Design and Planning Guide

MH Custom Cabinetry Inc. Accessories - Miscellaneous

These are our typical options. Remember we are a custom shop, so if you would like something different just let us know!

Base w/ Tapered Feet

4” Tapered Foot

Island Corbels (Standard)

1- side tapered 4- side tapered

Tapered Legs

1 ½” Door Molding

Arched Toe Kick

Standard Base Shoe¾” x ¾”

Standard Trim/Scribe ⅛” Radius or Square¾” x ¼”

1 ⅛” Door Molding

Page 27: Cabinetry Design and Planning Guide

MH Custom Cabinetry Inc. Accessories - Wood Hoods

Our wood hoods are custom made to fit your hood vent insert. Our exceptional craftsmen will work with you on the design to ensure it is exactly what you want. The best and easiest way to start is to find a picture or link to one online and send it to us.

Page 28: Cabinetry Design and Planning Guide

Blind Corner Accessories Pull-outs Lazy Susan

MH Custom Cabinetry Inc. Accessories - Cabinet

Below you will find some of our most popular Cabinet accessories. There are many more options available, please feel free to send in questions or pictures of an item you would like. Some items require a specific opening allowance for the item to fit.

Lazy Susan Half Moon

Cloud Pullout

2 Can Trash w/ Recycle

Knife/Utensil Base Organizer

Base Organizer Tray Divider Pull-out

32” D Shape Lazy Susan

Spice Pull-out

Stationary Tray Divider

32” Full Circle Lazy Susan

Page 29: Cabinetry Design and Planning Guide

Sink Pull-outs Drawer

Vanity

MH Custom Cabinetry Inc. Accessories - Cabinet

Below you will find some of our most popular Cabinet accessories. There are many more options available, please feel free to send in questions or pictures of an item you would like. Some items require a specific opening allowance for the item to fit.

Tip-out Drawer

Full Height Pull-out Pantry

Charging Drawer

Pots/Pan Peg Drawer

Cutlery Drawer(We make)

Bread Drawer

Pull-out Pantry

Grooming Organizer

Page 30: Cabinetry Design and Planning Guide

Upper Laundry/Closet Other Items We make

● Rollout Shelves/Trays

● Wine Bottle Holders● Bread Boards● Filing Drawers● Closet Rod● Appliance Garages● And more!

Mixer

MH Custom Cabinetry Inc. Accessories - Cabinet

Below you will find some of our most popular Cabinet accessories. There are many more options available, please feel free to send in questions or pictures of an item you would like. Some items require a specific opening allowance for the item to fit.

Door Mount Spice Rack

Wall Pull-outShelving

Fold out Ironing Board

Wire Hamper Pull-out

Jewelry Drawer Tilt-out Hamper Mixer Lift

Page 31: Cabinetry Design and Planning Guide

Please print and fill out this sheet before coming into the shop to meet with us. This will allow us to spend more time with you going over more important details like the overall layout and appliance locations.

MH Custom Cabinetry Inc. Design Selections

Face Frame Styles Wood Species Finishing Crown Detail Paneled Ends

Standard Red Oak Stains 3302 Standard

Semi-Faceless White Oak Driftwood 3303 To Floor

Inset Cherry Slate 3305 Applied Door

Beaded Inset Hickory Paprika 3306 Feet

Full Overlay Knotty Hickory (Rustic) Fog 3307 4” Tapered

Euro(Frameless) Beech Java 3308 Other

Alder Wheat 3315 Corbels

Door Selection Knotty Alder (Rustic) Candlelight 3316 Standard

Door Style Walnut Mocha 3320 Other

Door Edge Sapele (Mahogany) Other/Match 3329 Flooring

Inside Profile Maple Paint 3333 Before Cabinets

Panel Profile Paint Grade (Poplar) Paint Match Flat After Cabinets

Other Other Other

Page 32: Cabinetry Design and Planning Guide

MH Custom Cabinetry Inc. Design Selections

Please print and fill out this sheet before coming into the shop to meet with us. This will allow us to spend more time with you going over more important details like the overall layout and appliance locations.

Blind Corner Assemblies

- Lazy Susan on Half Moon

- Cloud Pull-out

Pull-outs

- 2 Can Trash Recycle

- Knife/Utensil Organizer

- Spice Pull-out

- Base Organizer

- Tray Divider Pull-out

- Stationary Tray Divider

- Pantry Pull-out

- Full Height Pantry Pull-out

Sink

- Tip-out Tray

Drawer

- Pots/Pan Peg Drawer

- Charging Drawer

- Cutlery Drawer

- Bread Drawer

Upper

- Door Mount Spice Rack

- Wall Pull-out Shelving

Laundry/Closet

- Fold out Ironing Board

- Jewelry Drawer

- Wire Hamper Pull-out

- Tilt out Hamper

Mixer

- Mixer Lift System

Other Items We Make

- Rollout Trays/Shelf

- Wine Bottle Holders

- Bread Boards

- Filing Drawers

- Closet Rod (Chrome)

- Appliance Garage

Custom Wood Hood

Yes

Notes: