ca workload automation ca 7 edtion 11.3 ca rs 1404 ... workload automation ca 7 edtion 2 ca rs 1404...
TRANSCRIPT
CA Workload Automation CA 7 Edtion 11.3 1
CA RS 1404 Service ListCA Workload Automation CA 7 Edtion 11.3 1
CA RS 1404 Service List
Release Service Description Hiper
11.3 RO65607 SASSCIAS - AGENT JOB SUBMITTED AND SENT TO WRONG AGENT
RO65676 JFM NOT TRACKING NON-EXEC JOBS WITHOUT JCL
RO66334 SASSSRC1 - HANG DOING RESOLV MANY TIMES
RO66404 CAIASQUE,CAIASSVC - U0791-19C DIAGNOSTIC CODES
RO66613 JFM R113 PREDICTFLOWS(Y) PROBLEMS
RO67143 SASSNUC - CCI TERMINAL PERFORMANCE
RO67414 SASSSM61 - JOBCONN,JDEP,JOB=A NOT WORKING
RO67425 SASSSCM3 - PROCESS PROBLEM WITH TRAILER TERM
RO67464 CAIASDSP - S502 ABEND DURING THE SHUTDOWN OF CA 7
RO67465 CAIASTCP - U0791/FSP_ABEND6
RO67543 JFM DOES NOT SET REPEAT VALUE IN FORECAST
RO67806 ADD SUPPORT FOR IDASH TO JFM
RO67807 ADD SUPPORT FOR IDASH TO JFM
RO68097 SASSSPO7 - DEMAND / DEPJOB / EXEC NOT WORKING
RO68139 SASSSJR3 - LIST COMMAND DISPLAYS *CRDLOAD INFORMATION
RO68275 JFM GETCA7DATA MAY ABEND IF JOB DOES NOT EXIST
RO68305 SASSQM82 - AGFILE TYPE=FILELIST IS NOT ALLOWING FTP_JOB
RO68338 CAIASBLD - AGFILE TYPE=FILELIST IS NOT ALLOWING FTP_JOB
The CA RS 1404 service count for this release is 18
CA Workload Automation CA 7 Edtion 2
CA RS 1404 Service List for CAL2B30CA Workload Automation CA 7 Edtion 2
CA RS 1404 Service List for CAL2B30
FMID Service Description Hiper
CAL2B30 RO65607 SASSCIAS - AGENT JOB SUBMITTED AND SENT TO WRONG AGENT
RO65676 JFM NOT TRACKING NON-EXEC JOBS WITHOUT JCL
RO66334 SASSSRC1 - HANG DOING RESOLV MANY TIMES
RO67143 SASSNUC - CCI TERMINAL PERFORMANCE
RO67414 SASSSM61 - JOBCONN,JDEP,JOB=A NOT WORKING
RO67425 SASSSCM3 - PROCESS PROBLEM WITH TRAILER TERM
RO67806 ADD SUPPORT FOR IDASH TO JFM
RO68097 SASSSPO7 - DEMAND / DEPJOB / EXEC NOT WORKING
RO68139 SASSSJR3 - LIST COMMAND DISPLAYS *CRDLOAD INFORMATION
RO68305 SASSQM82 - AGFILE TYPE=FILELIST IS NOT ALLOWING FTP_JOB
The CA RS 1404 service count for this FMID is 10
CA Workload Automation CA 7 Edtion 3
CA RS 1404 Service List for CAL2B31CA Workload Automation CA 7 Edtion 3
CA RS 1404 Service List for CAL2B31
FMID Service Description Hiper
CAL2B31 RO66613 JFM R113 PREDICTFLOWS(Y) PROBLEMS
RO67543 JFM DOES NOT SET REPEAT VALUE IN FORECAST
RO67807 ADD SUPPORT FOR IDASH TO JFM
RO68275 JFM GETCA7DATA MAY ABEND IF JOB DOES NOT EXIST
The CA RS 1404 service count for this FMID is 4
CA Workload Automation CA 7 Edtion 4
CA RS 1404 Service List for CIASB00CA Workload Automation CA 7 Edtion 4
CA RS 1404 Service List for CIASB00
FMID Service Description Hiper
CIASB00 RO66404 CAIASQUE,CAIASSVC - U0791-19C DIAGNOSTIC CODES
RO67464 CAIASDSP - S502 ABEND DURING THE SHUTDOWN OF CA 7
RO67465 CAIASTCP - U0791/FSP_ABEND6
RO68338 CAIASBLD - AGFILE TYPE=FILELIST IS NOT ALLOWING FTP_JOB
The CA RS 1404 service count for this FMID is 4
CA Workload Automation CA 7 Edtion 11.3 5
CA RS 1404 - PTF RO65607 DetailsCA Workload Automation CA 7 Edtion 11.3 5
CA RS 1404 - PTF RO65607 Details
Release Service Details11.3 RO65607 RO65607 M.C.S. ENTRIES = ++PTF (RO65607)
SASSCIAS - AGENT JOB SUBMITTED AND SENT TO WRONG AGENT
PROBLEM DESCRIPTION:
It's possible that an Agent Job can be resubmitted to a wrong Agent.
It's a timing situation where CA 7 fetches the Agent Job segment
of the previous Agent Job.
SYMPTOMS:
Agent Job can be submitted to a wrong Agent server.
IMPACT:
User has to cancel the job and resubmitted it again.
CIRCUMVENTION:
N/A
PRODUCTS AFFECTED:
CA 7 r11.3
PRODUCT(S) AFFECTED: CA Workload Automation SE Release 11.3
Star Problem(s):
7 3121
Copyright (C) 2014 CA. All rights reserved. R00671-AL2113-SP1
DESC(SASSCIAS - AGENT JOB SUBMITTED AND SENT TO WRONG AGENT) .
++VER (Z038)
FMID (CAL2B30)
PRE ( RO53716 RO54970 RO63644 )
SUP ( RO47200 RO49395 RO63699 TR47200 TR49395 TR53739
TR54597 TR63699 TR65607 )
CA Workload Automation CA 7 Edtion 11.3 6
CA RS 1404 - PTF RO65676 DetailsCA Workload Automation CA 7 Edtion 11.3 6
CA RS 1404 - PTF RO65676 Details
Release Service Details11.3 RO65676 RO65676 M.C.S. ENTRIES = ++PTF (RO65676)
JFM NOT TRACKING NON-EXEC JOBS WITHOUT JCL
PROBLEM DESCRIPTION:
If a non-executable job that has no JCL associated with it triggers a
job that starts a critical path flow, that flow will not be tracked
by JFM or CPM.
SYMPTOMS:
Critical path flows will not be tracked.
IMPACT:
See above.
CIRCUMVENTION:
Associate JCL with the non-executable job, or make the job executable.
PRODUCTS AFFECTED:
CA 7 r11.3
PRODUCT(S) AFFECTED: CA Workload Automation SE Release 11.3
Star Problem(s):
7 3102
Copyright (C) 2013 CA. All rights reserved. R00672-AL2113-SP1
DESC(JFM NOT TRACKING NON-EXEC JOBS WITHOUT JCL) .
++VER (Z038)
FMID (CAL2B30)
PRE ( RO28418 RO32912 RO55212 RO60486 )
SUP ( AR28418 RO16008 RO28857 RO48716 RO58448 RO61050
TR16008 TR28857 TR48716 TR58448 TR61050 TR65676 )
CA Workload Automation CA 7 Edtion 11.3 7
CA RS 1404 - PTF RO66334 DetailsCA Workload Automation CA 7 Edtion 11.3 7
CA RS 1404 - PTF RO66334 Details
Release Service Details11.3 RO66334 RO66334 M.C.S. ENTRIES = ++PTF (RO66334)
SASSSRC1 - HANG DOING RESOLV MANY TIMES
PROBLEM DESCRIPTION:
A hang condition can occur if the RESOLV command is
done from an online terminal, and the amount of
output exceeds 255 pages. This results in error
CA-7.020 - r11.3( ) DISK QUEUE TABLE I/O ERROR .
If this CA-7.020 only occurs a few times, then the
hang condition will not occur. However, if there
are several dozens of these, then it is possible
that the hang can occur. Using the /DISPLAY,PL=ALL
command the available storage in the NSP pool can
be checked to see if the amount is very small. As
long as there is over 100,000 bytes available,
there should be no problem. Also, if the RESOLVs
are done from a BTI or CCI terminal, then the
problem will not occur.
SYMPTOMS:
Possible hang.
IMPACT:
RESOLV command may not complete.
CIRCUMVENTION:
Do mass RESOLVs using a BTI or CCI terminal.
PRODUCTS AFFECTED:
CA 7 r11.3
PRODUCT(S) AFFECTED: CA Workload Automation SE Release 11.3
Star Problem(s):
7 3128
Copyright (C) 2014 CA. All rights reserved. R00673-AL2113-SP1
DESC(SASSSRC1 - HANG DOING RESOLV MANY TIMES) .
++VER (Z038)
FMID (CAL2B30)
SUP ( RO21053 TR21053 TR66334 )
CA Workload Automation CA 7 Edtion 11.3 8
CA RS 1404 - PTF RO66404 DetailsCA Workload Automation CA 7 Edtion 11.3 8
CA RS 1404 - PTF RO66404 Details
Release Service Details11.3 RO66404 RO66404 M.C.S. ENTRIES = ++PTF (RO66404)
CAIASQUE,CAIASSVC - U0791-19C DIAGNOSTIC CODES
PROBLEM DESCRIPTION:
It is possible for IAS to ABEND with U0791.
The root cause is unknown but the reason code 19C means
an area has been corrupted.
This APAR adds debugging information to a log entry when this
condition occurs.
SYMPTOMS:
ABEND U0791 with REASON CODE=0000019C.
IMPACT:
Possible Loop in IAS.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED: IAS Release 11.0
Star Problem(s):
IAS 66
Copyright (C) 2014 CA. All rights reserved. R00077-IAS110-SP1
DESC(CAIASQUE,CAIASSVC - U0791-19C DIAGNOSTIC CODES) .
++VER (Z038)
FMID (CIASB00)
PRE ( RO20142 RO38710 RO44377 RO54616 )
SUP ( RO37479 RO61551 TR37479 TR61551 TR66404 )
CA Workload Automation CA 7 Edtion 11.3 9
CA RS 1404 - PTF RO66613 DetailsCA Workload Automation CA 7 Edtion 11.3 9
CA RS 1404 - PTF RO66613 Details
Release Service Details11.3 RO66613 RO66613 M.C.S. ENTRIES = ++PTF (RO66613)
JFM R113 PREDICTFLOWS(Y) PROBLEMS
PROBLEM DESCRIPTION:
1) If starting job same as ending job ("single job flow"), flow does
not track.
2) Jobs do not use the correct flow definitions.
SYMPTOMS:
Numerous tracking problems when using PREDICTFLOWS(Y).
IMPACT:
Flow does not enter CPM ISPF WORKLOAD DISPLAY.
CIRCUMVENTION:
None, or dont define flows as a single job.
PRODUCTS AFFECTED:
CA 7 r11.3 r12.0(#3169)
PRODUCT(S) AFFECTED: CA Workload Automation SE Release 11.3
Star Problem(s):
7 3171
Copyright (C) 2014 CA. All rights reserved. R00676-AL2113-SP1
DESC(JFM R113 PREDICTFLOWS(Y) PROBLEMS) .
++VER (Z038)
FMID (CAL2B31)
PRE ( RO15500 RO18693 RO19590 RO20161 RO20480 RO20849
RO20959 RO21084 RO21395 RO21645 RO21672 RO31277
RO51292 RO52129 RO52586 RO56067 )
SUP ( RO33609 TR33609 TR66606 TR66613 )
CA Workload Automation CA 7 Edtion 11.3 10
CA RS 1404 - PTF RO67143 DetailsCA Workload Automation CA 7 Edtion 11.3 10
CA RS 1404 - PTF RO67143 Details
Release Service Details11.3 RO67143 RO67143 M.C.S. ENTRIES = ++PTF (RO67143)
SASSNUC - CCI TERMINAL PERFORMANCE
PROBLEM DESCRIPTION:
This fix will provide better performance with the
usage of CCI terminals, especially if the TCP/IP
interface is also used. For example, message
CAL2C905E CA-7 XTM NOT RESPONDING can be gotten
when CA 7 does not respond quick enough to certain
CCI requests.
Note that module SASSNUC is part of the UCC7
composite LKED.
SYMPTOMS:
CCI requests not done.
IMPACT:
Delayed CCI processing.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA 7 r11.3
PRODUCT(S) AFFECTED:
CA Workload Automation SE Release 11.3
Star Problem(s):
7 3195
Copyright (C) 2014 CA. All rights reserved. R00679-AL2113-SP1
DESC(SASSNUC - CCI TERMINAL PERFORMANCE) .
++VER (Z038)
FMID (CAL2B30)
PRE ( RO32912 )
SUP ( AR64604 RO52797 RO64604 TR52797 TR64604 TR67143 )
CA Workload Automation CA 7 Edtion 11.3 11
CA RS 1404 - PTF RO67414 DetailsCA Workload Automation CA 7 Edtion 11.3 11
CA RS 1404 - PTF RO67414 Details
Release Service Details11.3 RO67414 RO67414 M.C.S. ENTRIES = ++PTF (RO67414)
SASSSM61 - JOBCONN,JDEP,JOB=A NOT WORKING
PROBLEM DESCRIPTION:
The command JOBCONN,JDEP,JOB=A should come back
with the DB.3.2 screen with the LIST for JOB A.
After fix RO63048 the command comes back with the
DB.3.2 screen "cleared".
SYMPTOMS:
Not all data shown.
IMPACT:
Medium.
CIRCUMVENTION:
Use LIST function from the screen.
PRODUCTS AFFECTED:
CA 7 r11.3
PRODUCT(S) AFFECTED:
CA Workload Automation SE Release 11.3
Star Problem(s):
7 3204
Copyright (C) 2014 CA. All rights reserved. R00681-AL2113-SP1
DESC(SASSSM61 - JOBCONN,JDEP,JOB=A NOT WORKING) .
++VER (Z038)
FMID (CAL2B30)
PRE ( RO21059 )
SUP ( RO21630 RO29315 RO63048 TR21630 TR29315 TR63048
TR67366 TR67414 )
CA Workload Automation CA 7 Edtion 11.3 12
CA RS 1404 - PTF RO67425 DetailsCA Workload Automation CA 7 Edtion 11.3 12
CA RS 1404 - PTF RO67425 Details
Release Service Details11.3 RO67425 RO67425 M.C.S. ENTRIES = ++PTF (RO67425)
SASSSCM3 - PROCESS PROBLEM WITH TRAILER TERM
PROBLEM DESCRIPTION:
It is possible that the processing done with the
Trailer terminal (SASSTRLR and U7SVC) can result in
a recycle of CA 7. This is a rare occurrence, and
is similar to an old problem with the /SHUTDOWN
command not getting "cleared" from the COMMDS.
This fix corrects this new problem.
SYMPTOMS:
Recycle of CA 7 done.
IMPACT:
Medium.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA 7 r11.3
PRODUCT(S) AFFECTED:
CA Workload Automation SE Release 11.3
Star Problem(s):
7 3214
Copyright (C) 2014 CA. All rights reserved. R00682-AL2113-SP1
DESC(SASSSCM3 - PROCESS PROBLEM WITH TRAILER TERM) .
++VER (Z038)
FMID (CAL2B30)
SUP ( TR67425 )
++HOLD (RO67425) SYSTEM FMID(CAL2B30)
REASON (ACTION ) DATE (14051)
COMMENT (
+----------------------------------------------------------------------+
| CA Workload Automation SE Release 11.3 |
+----------+-----------------------------------------------------------+
|SEQUENCE | Before Apply |
+----------+-----------------------------------------------------------+
|PURPOSE | Prevent problem with Trailer terminal |
+----------+-----------------------------------------------------------+
|USERS | All users |
|AFFECTED | |
+----------+-----------------------------------------------------------+
|KNOWLEDGE | Product Administration |
|REQUIRED | |
+----------+-----------------------------------------------------------+
|ACCESS | Product libraries |
|REQUIRED | |
+----------+-----------------------------------------------------------+
**************************
* STEPS TO PERFORM *
**************************
Must release HOLDDATA
).
CA Workload Automation CA 7 Edtion 11.3 13
CA RS 1404 - PTF RO67464 DetailsCA Workload Automation CA 7 Edtion 11.3 13
CA RS 1404 - PTF RO67464 Details
Release Service Details11.3 RO67464 RO67464 M.C.S. ENTRIES = ++PTF (RO67464)
CAIASDSP - S502 ABEND DURING THE SHUTDOWN OF CA 7
PROBLEM DESCRIPTION:
During a shutdown of CA 7, IAS abends with an S502 abend.
This occurs if there is no agent defined in the AGENT Definition.
SYMPTOMS:
S502 abend.
IMPACT:
CA7 outage.
CIRCUMVENTION:
Define at least one Agent in the AGENT Definition file.
PRODUCT(S) AFFECTED: IAS Release 11.0
Star Problem(s):
IAS 62
Copyright (C) 2014 CA. All rights reserved. R00079-IAS110-SP1
DESC(CAIASDSP - S502 ABEND DURING THE SHUTDOWN OF CA 7) .
++VER (Z038)
FMID (CIASB00)
PRE ( RO38710 RO56523 )
SUP ( TR67464 )
CA Workload Automation CA 7 Edtion 11.3 14
CA RS 1404 - PTF RO67465 DetailsCA Workload Automation CA 7 Edtion 11.3 14
CA RS 1404 - PTF RO67465 Details
Release Service Details11.3 RO67465 RO67465 M.C.S. ENTRIES = ++PTF (RO67465)
CAIASTCP - U0791/FSP_ABEND6
PROBLEM DESCRIPTION:
It's possible for IAS to ABEND with U0791. This is due
to a timing issue where multi-threads fetch the same
message to be process. ABEND will occur when IAS is
trying to free the same message twice.
SYMPTOMS:
ABEND U0791 with R0=00000008.
IMPACT:
IAS becomes inactive.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED: IAS Release 11.0
Star Problem(s):
IAS 60
Copyright (C) 2014 CA. All rights reserved. R00080-IAS110-SP1
DESC(CAIASTCP - U0791/FSP_ABEND6) .
++VER (Z038)
FMID (CIASB00)
PRE ( RO20142 RO38710 RO44377 RO52577 RO54616 )
SUP ( AC55720 RO36020 RO52215 RO55556 TR14208 TR14482
TR15209 TR36018 TR36020 TR52215 TR55556 TR66035
TR67465 )
CA Workload Automation CA 7 Edtion 11.3 15
CA RS 1404 - PTF RO67543 DetailsCA Workload Automation CA 7 Edtion 11.3 15
CA RS 1404 - PTF RO67543 Details
Release Service Details11.3 RO67543 RO67543 M.C.S. ENTRIES = ++PTF (RO67543)
JFM DOES NOT SET REPEAT VALUE IN FORECAST
PROBLEM DESCRIPTION:
1) JFM does not build repeated successors of a calendar scheduled job.
2) JFM incorrectly modifies the estimated start time of a job that has
a submit time requirement.
3) JFM incorrectly displays part of the ObjectID as the Schid on
logging the requiredBy list BestFit entries when they contain a
non-zero schid.
SYMPTOMS:
1) JFM does not build the repeated successors of a calendar scheduled
job. If such a repeated successor is required by another job then
JFM may be unable to correctly determine when the requirement is
satisfied. If the repeated job also triggers other jobs, then
JFM will not include those triggered jobs in its workload
projections.
2) When a job enters the workload, JFM will set the job's estimated
start time to the submit time requirement if indicated. However,
the estimated start time is reset to the workload entry time
during requirement evaluation. This can result in inaccurate
workload projections.
3) When a job in the workload projection has a non-zero schid, and is
matched as a BestFit for a requiredBy list, it will display a very
negative value instead of the actual schid.
IMPACT:
1) This condition could result in inaccurate workload projections.
3) This condition is a cosmetic error only.
CIRCUMVENTION:
1) None.
2) None.
3) Cross check ObjectID with earlier DUMPS to find the actual schid.
PRODUCT(S) AFFECTED:
CA Workload Automation SE Release 11.3
Star Problem(s):
7 3206
L2JFJOB - REQUIREDBY SHOWING NEG SCHID IN LOG
PROBLEM DESCRIPTION:
The BestFit log entries for requiredBy lists within the JFLOG
attempt to format the ObjectID as the Schid, resulting in
strange - usually negative - numbers in the Schid.
SYMPTOMS:
JFLOG entries show negative values in the Schid field for
BestFit items in requiredBy listings within the log.
IMPACT:
Cosmetic and informational impact only.
CIRCUMVENTION:
Reference the CA7 job number against the log for CA7 to find the
true Schid.
PRODUCT(S) AFFECTED:
CA Workload Automation SE Release 11.3
Star Problem(s):
7 3207
Copyright (C) 2014 CA. All rights reserved. R00683-AL2113-SP1
DESC(JFM DOES NOT SET REPEAT VALUE IN FORECAST) .
++VER (Z038)
FMID (CAL2B31)
PRE ( RO16322 RO16741 RO17094 RO18082 RO18693 RO18759
RO19590 RO20161 RO20234 RO20291 RO20311 RO20480
RO20737 RO20849 RO20959 RO21084 RO21395 RO21645
RO31277 RO51292 RO52129 RO52586 RO55173 RO55213
RO62267 )
SUP ( RO18057 RO20332 RO20878 RO21231 RO32273 RO63208
CA Workload Automation CA 7 Edtion 11.3 16
CA RS 1404 - PTF RO67543 Details
Release Service DetailsTR15182 TR18057 TR20332 TR20878 TR21231 TR32273
TR63208 TR67543 )
CA Workload Automation CA 7 Edtion 11.3 17
CA RS 1404 - PTF RO67806 DetailsCA Workload Automation CA 7 Edtion 11.3 17
CA RS 1404 - PTF RO67806 Details
Release Service Details11.3 RO67806 RO67806 M.C.S. ENTRIES = ++PTF (RO67806)
ADD SUPPORT FOR IDASH TO JFM
PROBLEM DESCRIPTION:
This enhancement contains updates to the CA 7 Jobflow Monitor (JFM) to
support CA Workload Automation iDash. Also included in this enhancement is
support for Secure Sockets (SSL) and support for a JFM parameter member
prefix.
SYMPTOMS:
None.
IMPACT:
Medium
CIRCUMVENTION:
N/A
PRODUCT(S) AFFECTED: CA Workload Automation SE Release 11.3
CA 7 r11.3
Star Problem(s):
7 2888
Copyright (C) 2014 CA. All rights reserved. R00684-AL2113-SP1
DESC(ADD SUPPORT FOR IDASH TO JFM) .
++VER (Z038)
FMID (CAL2B30)
PRE ( RO51291 RO55172 RO56661 RO67414 )
SUP ( AR56661 RO20958 RO21630 RO27842 RO29315 RO31495
RO63048 RO64683 TR20958 TR21630 TR27842 TR29315
TR31495 TR63048 TR64683 TR64983 TR65008 TR67091
TR67806 )
++IF FMID(CAL2B31) REQ( RO67807) .
CA Workload Automation CA 7 Edtion 11.3 18
CA RS 1404 - PTF RO67807 DetailsCA Workload Automation CA 7 Edtion 11.3 18
CA RS 1404 - PTF RO67807 Details
Release Service Details11.3 RO67807 RO67807 M.C.S. ENTRIES = ++PTF (RO67807)
ADD SUPPORT FOR IDASH TO JFM
PROBLEM DESCRIPTION:
This enhancement contains updates to the CA 7 Jobflow Monitor (JFM) to
support CA Workload Automation iDash. Also included in this enhancement is
support for Secure Sockets (SSL) and support for a JFM parameter member
prefix.
SYMPTOMS:
None.
IMPACT:
Medium
CIRCUMVENTION:
N/A
PRODUCT(S) AFFECTED: CA Workload Automation SE Release 11.3
CA 7 r11.3
Star Problem(s):
7 2888
Copyright (C) 2014 CA. All rights reserved. R00684-AL2113-SP1
DESC(ADD SUPPORT FOR IDASH TO JFM) .
++VER (Z038)
FMID (CAL2B31)
PRE ( RO15500 RO16322 RO16741 RO16978 RO17042 RO17094
RO18082 RO18605 RO18686 RO18693 RO18759 RO19590
RO19961 RO20161 RO20234 RO20311 RO20480 RO20737
RO20959 RO21084 RO21231 RO21395 RO21645 RO21672
RO21855 RO31277 RO34778 RO51292 RO52586 RO55173
RO55213 RO56067 RO58316 RO59371 RO60312 RO62267
RO67543 )
SUP ( RO15905 RO16142 RO17882 RO18054 RO18057 RO18125
RO18166 RO18537 RO18763 RO18766 RO18789 RO19578
RO19672 RO19724 RO19907 RO20291 RO20332 RO20353
RO20612 RO20657 RO20849 RO20878 RO21446 RO22398
RO28629 RO32273 RO33609 RO33793 RO52129 RO60629
RO61146 RO63208 RO66613 TR15131 TR15182 TR15196
TR15905 TR16142 TR17882 TR18054 TR18057 TR18125
TR18166 TR18537 TR18763 TR18766 TR18789 TR19578
TR19672 TR19724 TR19907 TR20291 TR20332 TR20353
TR20612 TR20657 TR20849 TR20878 TR21446 TR22398
TR28629 TR32273 TR33609 TR33793 TR52055 TR52129
TR60629 TR61146 TR63208 TR64984 TR65009 TR66606
TR66613 TR67092 TR67807 )
++IF FMID(CAL2B30) REQ( RO67806) .
CA Workload Automation CA 7 Edtion 11.3 19
CA RS 1404 - PTF RO68097 DetailsCA Workload Automation CA 7 Edtion 11.3 19
CA RS 1404 - PTF RO68097 Details
Release Service Details11.3 RO68097 RO68097 M.C.S. ENTRIES = ++PTF (RO68097)
SASSSPO7 - DEMAND / DEPJOB / EXEC NOT WORKING
PROBLEM DESCRIPTION:
A DEMAND command using EXEC=Y does not properly
override the EXEC value of 'N' from the data base
if the DEPJOB keyword is also used. This means
that the job would come into the REQQ as EXEC=N,
even though EXEC=Y was specified on the DEMAND.
The same problem exists for the keywords of RMS
and LATE.
SYMPTOMS:
DEMANDed job not getting correct attributes.
IMPACT:
Medium.
CIRCUMVENTION:
Do not use the DEPJOB keyword.
PRODUCTS AFFECTED:
CA 7 r11.3
PRODUCT(S) AFFECTED:
CA Workload Automation SE Release 11.3
Star Problem(s):
7 3232
Copyright (C) 2014 CA. All rights reserved. R00686-AL2113-SP1
DESC(SASSSPO7 - DEMAND / DEPJOB / EXEC NOT WORKING) .
++VER (Z038)
FMID (CAL2B30)
PRE ( RO16134 RO28418 RO32912 )
SUP ( RO61280 TR61280 TR68097 )
CA Workload Automation CA 7 Edtion 11.3 20
CA RS 1404 - PTF RO68139 DetailsCA Workload Automation CA 7 Edtion 11.3 20
CA RS 1404 - PTF RO68139 Details
Release Service Details11.3 RO68139 RO68139 M.C.S. ENTRIES = ++PTF (RO68139)
SASSSJR3 - LIST COMMAND DISPLAYS *CRDLOAD INFORMATION
PROBLEM DESCRIPTION:
LIST command can show *CRDLOAD information. *CRDLOAD is a
special 'job' used by internal processing in CA 7 and should
never show in command output.
SYMPTOMS:
A JOB *CRDLOAD is showing in LIST command
IMPACT:
None.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA 7 r11.3
PRODUCT(S) AFFECTED: CA Workload Automation SE Release 11.3
Star Problem(s):
7 3240
Copyright (C) 2014 CA. All rights reserved. R00687-AL2113-SP1
DESC(SASSSJR3 - LIST COMMAND DISPLAYS *CRDLOAD INFORMATION) .
++VER (Z038)
FMID (CAL2B30)
SUP ( RO37814 TR37712 TR37814 TR68139 )
CA Workload Automation CA 7 Edtion 11.3 21
CA RS 1404 - PTF RO68275 DetailsCA Workload Automation CA 7 Edtion 11.3 21
CA RS 1404 - PTF RO68275 Details
Release Service Details11.3 RO68275 RO68275 M.C.S. ENTRIES = ++PTF (RO68275)
JFM GETCA7DATA MAY ABEND IF JOB DOES NOT EXIST
PROBLEM DESCRIPTION:
CA 7 Jobflow Monitor (JFM) may encounter an S0C4 ABEND while
processing a GetCA7Data Web Service request if the requested job does
not exist. The GetCA7Data Web Service is consumed by CA Workload
Automation iDash to retrieve CA 7 job information. The ABEND occurs
in z/OS 2.1.
SYMPTOMS:
The following message will be issued:
IEF450I jobname [procstep] stepname - ABEND=S0C4 U0000
REASON=0000003B
If a dump is analyzed, the Language Environment Traceback will
contain an exception for program L2JFAISD+00050E.
A JFM log entry (CAJFLOG or CAJFnnnn DD) similar to the following
will be near the end of the log:
L2JFQWKT(processGetCa7Data): about to call jfm_GetKey, job=jobname
IMPACT:
The JFM address space will terminate and the following message will
be issued:
IEF450I jobname [procstep] stepname - ABEND=S0C4 U0000
REASON=0000003B
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
CA Workload Automation SE Release 11.3
CA 7 r11.3
Star Problem(s):
7 3243
Copyright (C) 2014 CA. All rights reserved. R00690-AL2113-SP1
DESC(JFM GETCA7DATA MAY ABEND IF JOB DOES NOT EXIST) .
++VER (Z038)
FMID (CAL2B31)
PRE ( RO58316 RO59371 RO67807 )
SUP ( TR68273 TR68275 )
CA Workload Automation CA 7 Edtion 11.3 22
CA RS 1404 - PTF RO68305 DetailsCA Workload Automation CA 7 Edtion 11.3 22
CA RS 1404 - PTF RO68305 Details
Release Service Details11.3 RO68305 RO68305 M.C.S. ENTRIES = ++PTF (RO68305)
SASSQM82 - AGFILE TYPE=FILELIST IS NOT ALLOWING FTP_JOB
PROBLEM DESCRIPTION:
There are two ways to retrieve a spool file for an Agent
job that runs on the AS400 (I5 Agent).
1. Issue a command, AGFILE,JOB= ,TYPE=FILELIST.
2. Issue a command, AGFILE,JOB=..,LIST=ALL and then choose the function
key GF.
Neither of them allows to retrieve a spool file for FTP_JOB
types of Agent jobs ran on AS400 (I5 Agent) server.
SYMPTOMS:
AGFILE commands are not able to retrieve FTP_JOB types of Agent jobs
that defined on AS400 (I5 Agent) server.
IMPACT:
See above.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA 7 R11.3
PRODUCT(S) AFFECTED: CA Workload Automation SE Release 11.3
Star Problem(s):
7 3231
Copyright (C) 2014 CA. All rights reserved. R00691-AL2113-SP1
DESC(SASSQM82 - AGFILE TYPE=FILELIST IS NOT ALLOWING FTP_JOB) .
++VER (Z038)
FMID (CAL2B30)
PRE ( RO30845 RO31843 RO55172 )
SUP ( TR68305 )
CA Workload Automation CA 7 Edtion 11.3 23
CA RS 1404 - PTF RO68338 DetailsCA Workload Automation CA 7 Edtion 11.3 23
CA RS 1404 - PTF RO68338 Details
Release Service Details11.3 RO68338 RO68338 M.C.S. ENTRIES = ++PTF (RO68338)
CAIASBLD - AGFILE TYPE=FILELIST IS NOT ALLOWING FTP_JOB
PROBLEM DESCRIPTION:
There are two ways to retrieve a spool file for an Agent
job that runs on the AS400 (I5 Agent).
1. Issue a command, AGFILE,JOB= ,TYPE=FILELIST.
2. Issue a command, AGFILE,JOB=..,LIST=ALL and then choose the function
key GF.
Neither of them allows to retrieve a spool file for FTP_JOB
types of Agent jobs ran on AS400 (I5 Agent) server.
SYMPTOMS:
AGFILE commands are not able to retrieve FTP_JOB types of Agent jobs
that defined on AS400 (I5 Agent) server.
IMPACT:
See above.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED: IAS Release 11.0
Star Problem(s):
IAS 68
Copyright (C) 2014 CA. All rights reserved. R00082-IAS110-SP1
DESC(CAIASBLD - AGFILE TYPE=FILELIST IS NOT ALLOWING FTP_JOB) .
++VER (Z038)
FMID (CIASB00)
PRE ( RO18783 RO30419 RO41474 RO43654 RO44888 RO47077
RO54616 )
SUP ( RO19491 RO27885 TR14408 TR19491 TR27885 TR68338 )